zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

✨ MKS Robin Nano v3 + TFT_LVGL_UI + WiFi module (#22109)

Browse source
This commit is contained in:
MKS-Sean 2021-07-13 08:17:28 +08:00 committed by Scott Lahteine
parent 31fbec9a00
commit cad2f69687
51 changed files with 1271 additions and 650 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

14
Marlin/src/HAL/STM32/HAL.cpp
View file

@ -20,7 +20,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "HAL.h"
#include "usb_serial.h"
@ -91,15 +91,13 @@ void HAL_init() {
USB_Hook_init();
#endif
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
#if HAS_SD_HOST_DRIVE
MSC_SD_init(); // Enable USB SD card access
#endif
TERN_(HAS_SD_HOST_DRIVE, MSC_SD_init()); // Enable USB SD card access
#if PIN_EXISTS(USB_CONNECT)
OUT_WRITE(USB_CONNECT_PIN, !USB_CONNECT_INVERTING); // USB clear connection
delay(1000); // Give OS time to notice
OUT_WRITE(USB_CONNECT_PIN, !USB_CONNECT_INVERTING); // USB clear connection
delay(1000); // Give OS time to notice
WRITE(USB_CONNECT_PIN, USB_CONNECT_INVERTING);
#endif
}
@ -167,4 +165,4 @@ void HAL_SYSTICK_Callback() {
if (systick_user_callback) systick_user_callback();
}
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

2
Marlin/src/HAL/STM32/HAL_MinSerial.cpp
View file

@ -20,7 +20,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfigPre.h"

4
Marlin/src/HAL/STM32/HAL_SPI.cpp
View file

@ -20,7 +20,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfig.h"
@ -224,4 +224,4 @@ static SPISettings spiConfig;
#endif // SOFTWARE_SPI
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/MarlinSPI.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(STM32H7xx)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) && !defined(STM32H7xx)
#include "MarlinSPI.h"
@ -165,4 +165,4 @@ uint8_t MarlinSPI::dmaSend(const void * transmitBuf, uint16_t length, bool minc)
return 1;
}
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 && !STM32H7xx

4
Marlin/src/HAL/STM32/MarlinSerial.cpp
View file

@ -16,7 +16,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfig.h"
#include "MarlinSerial.h"
@ -101,4 +101,4 @@ void MarlinSerial::_rx_complete_irq(serial_t *obj) {
}
}
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfig.h"
@ -343,4 +343,4 @@
#endif // !USBD_USE_CDC_COMPOSITE
#endif // SDIO_SUPPORT
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/Servo.cpp
View file

@ -20,7 +20,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfig.h"
@ -107,4 +107,4 @@ void libServo::setInterruptPriority(uint32_t preemptPriority, uint32_t subPriori
}
#endif // HAS_SERVOS
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/eeprom_flash.cpp
View file

@ -20,7 +20,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfig.h"
@ -270,4 +270,4 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t
}
#endif // FLASH_EEPROM_EMULATION
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/eeprom_sdcard.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
/**
* Implementation of EEPROM settings in SD Card
@ -88,4 +88,4 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uin
}
#endif // SDCARD_EEPROM_EMULATION
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/eeprom_sram.cpp
View file

@ -20,7 +20,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfig.h"
@ -65,4 +65,4 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t
}
#endif // SRAM_EEPROM_EMULATION
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/eeprom_wired.cpp
View file

@ -20,7 +20,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfig.h"
@ -75,4 +75,4 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t
}
#endif // USE_WIRED_EEPROM
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/fast_pwm.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfigPre.h"
@ -56,4 +56,4 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
}
#endif // NEEDS_HARDWARE_PWM
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/fastio.cpp
View file

@ -20,7 +20,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfig.h"
@ -31,4 +31,4 @@ void FastIO_init() {
FastIOPortMap[STM_PORT(digitalPin[i])] = get_GPIO_Port(STM_PORT(digitalPin[i]));
}
#endif
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

14
Marlin/src/HAL/STM32/msc_sd.cpp
View file

@ -13,21 +13,24 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfigPre.h"
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && HAS_SD_HOST_DRIVE
#if HAS_SD_HOST_DRIVE
#include "msc_sd.h"
#include "../shared/Marduino.h"
#include "usbd_core.h"
#include "../shared/Marduino.h"
#include "../../sd/cardreader.h"
#include <USB.h>
#include <USBMscHandler.h>
#define BLOCK_SIZE 512
#define PRODUCT_ID 0x29
#include "../../sd/cardreader.h"
class Sd2CardUSBMscHandler : public USBMscHandler {
public:
DiskIODriver* diskIODriver() {
@ -121,4 +124,5 @@ void MSC_SD_init() {
USBDevice.begin();
}
#endif // __STM32F1__ && HAS_SD_HOST_DRIVE
#endif // HAS_SD_HOST_DRIVE
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/tft/gt911.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../../inc/MarlinConfig.h"
@ -199,4 +199,4 @@ bool GT911::getPoint(int16_t *x, int16_t *y) {
}
#endif // TFT_TOUCH_DEVICE_GT911
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/tft/tft_fsmc.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../../inc/MarlinConfig.h"
@ -178,4 +178,4 @@ void TFT_FSMC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Cou
}
#endif // HAS_FSMC_TFT
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/tft/tft_ltdc.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../../inc/MarlinConfig.h"
@ -384,4 +384,4 @@ void TFT_LTDC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Cou
}
#endif // HAS_LTDC_TFT
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/tft/tft_spi.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../../inc/MarlinConfig.h"
@ -240,4 +240,4 @@ void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Coun
}
#endif // HAS_SPI_TFT
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/tft/xpt2046.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../../inc/MarlinConfig.h"
@ -167,4 +167,4 @@ uint16_t XPT2046::SoftwareIO(uint16_t data) {
}
#endif // HAS_TFT_XPT2046
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/timers.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfig.h"
@ -319,4 +319,4 @@ static constexpr bool verify_no_timer_conflicts() {
// when hovering over it, making it easy to identify the conflicting timers.
static_assert(verify_no_timer_conflicts(), "One or more timer conflict detected. Examine \"timers_in_use\" to help identify conflict.");
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/usb_host.cpp
View file

@ -20,7 +20,7 @@
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfig.h"
@ -114,4 +114,4 @@ uint8_t BulkStorage::Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t b
}
#endif // USE_OTG_USB_HOST && USBHOST
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/usb_serial.cpp
View file

@ -16,7 +16,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfigPre.h"
@ -51,4 +51,4 @@ void USB_Hook_init() {
}
#endif // EMERGENCY_PARSER && USBD_USE_CDC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

4
Marlin/src/HAL/STM32/watchdog.cpp
View file

@ -19,7 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../inc/MarlinConfigPre.h"
@ -46,4 +46,4 @@ void HAL_watchdog_refresh() {
}
#endif // USE_WATCHDOG
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1

7
Marlin/src/HAL/STM32F1/msc_sd.cpp
View file

@ -13,9 +13,11 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __STM32F1__
#include "../../inc/MarlinConfigPre.h"
#if defined(__STM32F1__) && HAS_SD_HOST_DRIVE
#if HAS_SD_HOST_DRIVE
#include "msc_sd.h"
#include "SPI.h"
@ -92,4 +94,5 @@ void MSC_SD_init() {
#endif
}
#endif // __STM32F1__ && HAS_SD_HOST_DRIVE
#endif // HAS_SD_HOST_DRIVE
#endif // __STM32F1__

7
Marlin/src/MarlinCore.cpp
View file

@ -1209,13 +1209,6 @@ void setup() {
#endif
#endif
#if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE)
mks_esp_wifi_init();
WIFISERIAL.begin(WIFI_BAUDRATE);
serial_connect_timeout = millis() + 1000UL;
while (/*!WIFISERIAL && */PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
#endif
TERN_(DYNAMIC_VECTORTABLE, hook_cpu_exceptions()); // If supported, install Marlin exception handlers at runtime
SETUP_RUN(HAL_init());

2
Marlin/src/core/macros.h
View file

@ -442,7 +442,7 @@
return contains(str, '/') ? findLastPos(findStringEnd(str), '/') : str;
}
// Find the first occurence of a character in a string (or return the last position in the string)
// Find the first occurrence of a character in a string (or return the last position in the string)
constexpr const char* findFirst(const char *str, const char ch) {
return *str == ch || *str == 0 ? (str + 1) : findFirst(str + 1, ch);
}

2
Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h
View file

@ -288,7 +288,7 @@
// Remove compiler warning on an unused variable
#ifndef UNUSED
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#define UNUSED(X) (void)X
#else
#define UNUSED(x) ((void)(x))

28
Marlin/src/lcd/extui/mks_ui/draw_dialog.cpp
View file

@ -61,7 +61,7 @@ static lv_obj_t *scr, *tempText1, *filament_bar;
extern uint8_t sel_id;
extern bool once_flag, gcode_preview_over;
extern int upload_result;
extern uint32_t upload_time;
extern uint32_t upload_time_sec;
extern uint32_t upload_size;
extern bool temps_update_flag;
@ -406,28 +406,24 @@ void lv_draw_dialog(uint8_t type) {
char buf[200];
int _index = 0;
strcpy(buf, DIALOG_UPLOAD_FINISH_EN);
strcpy_P(buf, PSTR(DIALOG_UPLOAD_FINISH_EN));
_index = strlen(buf);
buf[_index] = '\n';
_index++;
strcat(buf, DIALOG_UPLOAD_SIZE_EN);
buf[_index++] = '\n';
strcat_P(buf, PSTR(DIALOG_UPLOAD_SIZE_EN));
_index = strlen(buf);
buf[_index] = ':';
_index++;
sprintf(&buf[_index], " %d KBytes\n", (int)(upload_size / 1024));
buf[_index++] = ':';
sprintf_P(&buf[_index], PSTR(" %d KBytes\n"), (int)(upload_size / 1024));
strcat(buf, DIALOG_UPLOAD_TIME_EN);
strcat_P(buf, PSTR(DIALOG_UPLOAD_TIME_EN));
_index = strlen(buf);
buf[_index] = ':';
_index++;
sprintf(&buf[_index], " %d s\n", (int)upload_time);
buf[_index++] = ':';
sprintf_P(&buf[_index], PSTR(" %d s\n"), (int)upload_time_sec);
strcat(buf, DIALOG_UPLOAD_SPEED_EN);
strcat_P(buf, PSTR(DIALOG_UPLOAD_SPEED_EN));
_index = strlen(buf);
buf[_index] = ':';
_index++;
sprintf(&buf[_index], " %d KBytes/s\n", (int)(upload_size / upload_time / 1024));
buf[_index++] = ':';
sprintf_P(&buf[_index], PSTR(" %d KBytes/s\n"), (int)(upload_size / upload_time_sec / 1024));
lv_label_set_text(labelDialog, buf);
lv_obj_align(labelDialog, nullptr, LV_ALIGN_CENTER, 0, -20);

5
Marlin/src/lcd/extui/mks_ui/draw_error_message.cpp
View file

@ -29,9 +29,12 @@
#include "tft_lvgl_configuration.h"
#include "SPI_TFT.h"
#include "mks_hardware_test.h"
#include "../../../inc/MarlinConfig.h"
#if ENABLED(MKS_TEST)
#include "mks_hardware_test.h"
#endif
static lv_obj_t *scr;
void lv_draw_error_message(PGM_P const msg) {

4
Marlin/src/lcd/extui/mks_ui/draw_printing.cpp
View file

@ -47,14 +47,16 @@ static lv_obj_t *scr;
static lv_obj_t *labelExt1, *labelFan, *labelZpos, *labelTime;
static lv_obj_t *labelPause, *labelStop, *labelOperat;
static lv_obj_t *bar1, *bar1ValueText;
static lv_obj_t *buttonPause, *buttonOperat, *buttonStop, *buttonExt1, *buttonExt2, *buttonBedstate, *buttonFanstate, *buttonZpos;
static lv_obj_t *buttonPause, *buttonOperat, *buttonStop, *buttonExt1, *buttonFanstate, *buttonZpos;
#if HAS_MULTI_EXTRUDER
static lv_obj_t *labelExt2;
static lv_obj_t *buttonExt2;
#endif
#if HAS_HEATED_BED
static lv_obj_t* labelBed;
static lv_obj_t* buttonBedstate;
#endif
enum {

122
Marlin/src/lcd/extui/mks_ui/draw_ready_print.cpp
View file

@ -27,7 +27,6 @@
#include "draw_tool.h"
#include <lv_conf.h>
#include "tft_lvgl_configuration.h"
#include "mks_hardware_test.h"
#include "draw_ui.h"
#include <lvgl.h>
@ -40,6 +39,10 @@
#include "draw_touch_calibration.h"
#endif
#if ENABLED(MKS_TEST)
#include "mks_hardware_test.h"
#endif
#include <stdio.h>
#define ICON_POS_Y 38
@ -48,14 +51,16 @@
extern lv_group_t* g;
static lv_obj_t *scr;
static lv_obj_t *labelExt1, *labelExt1Target, *labelFan;
static lv_obj_t *buttonExt1, *labelExt1, *buttonFanstate, *labelFan;
#if HAS_MULTI_EXTRUDER
static lv_obj_t *labelExt2, *labelExt2Target;
#if HAS_MULTI_HOTEND
static lv_obj_t *labelExt2;
static lv_obj_t *buttonExt2;
#endif
#if HAS_HEATED_BED
static lv_obj_t *labelBed, *labelBedTarget;
static lv_obj_t* labelBed;
static lv_obj_t* buttonBedstate;
#endif
#if ENABLED(MKS_TEST)
@ -136,18 +141,18 @@ void lv_draw_ready_print() {
lv_obj_align(label_tool, buttonTool, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
}
e1 = lv_label_create_empty(scr);
lv_obj_set_pos(e1, 20, 20);
sprintf_P(buf, PSTR("e1: %d"), thermalManager.wholeDegHotend(0));
lv_label_set_text(e1, buf);
#if HAS_HOTEND
e1 = lv_label_create_empty(scr);
lv_obj_set_pos(e1, 20, 20);
sprintf_P(buf, PSTR("e1: %d"), thermalManager.wholeDegHotend(0));
lv_label_set_text(e1, buf);
#endif
#if HAS_MULTI_HOTEND
e2 = lv_label_create_empty(scr);
lv_obj_set_pos(e2, 20, 45);
sprintf_P(buf, PSTR("e1: %d"), thermalManager.wholeDegHotend(1));
lv_label_set_text(e2, buf);
#endif
#if HAS_HEATED_BED
bed = lv_label_create_empty(scr);
lv_obj_set_pos(bed, 20, 95);
@ -178,72 +183,27 @@ void lv_draw_ready_print() {
lv_label_set_text(det_info, " ");
}
else {
lv_big_button_create(scr, "F:/bmp_tool.bin", main_menu.tool, 20, 180, event_handler, ID_TOOL);
lv_big_button_create(scr, "F:/bmp_set.bin", main_menu.set, 180, 180, event_handler, ID_SET);
lv_big_button_create(scr, "F:/bmp_printing.bin", main_menu.print, 340, 180, event_handler, ID_PRINT);
lv_big_button_create(scr, "F:/bmp_tool.bin", main_menu.tool, 20, 150, event_handler, ID_TOOL);
lv_big_button_create(scr, "F:/bmp_set.bin", main_menu.set, 180, 150, event_handler, ID_SET);
lv_big_button_create(scr, "F:/bmp_printing.bin", main_menu.print, 340, 150, event_handler, ID_PRINT);
// Monitoring
lv_obj_t *buttonExt1 = lv_big_button_create(scr, "F:/bmp_ext1_state.bin", " ", 55, ICON_POS_Y, event_handler, ID_INFO_EXT);
#if HAS_MULTI_EXTRUDER
lv_obj_t *buttonExt2 = lv_big_button_create(scr, "F:/bmp_ext2_state.bin", " ", 163, ICON_POS_Y, event_handler, ID_INFO_EXT);
#if HAS_HEATED_BED
lv_obj_t *buttonBedstate = lv_big_button_create(scr, "F:/bmp_bed_state.bin", " ", 271, ICON_POS_Y, event_handler, ID_INFO_BED);
#endif
#else
#if HAS_HEATED_BED
lv_obj_t *buttonBedstate = lv_big_button_create(scr, "F:/bmp_bed_state.bin", " ", 210, ICON_POS_Y, event_handler, ID_INFO_BED);
#endif
#if HAS_HOTEND
buttonExt1 = lv_big_button_create(scr, "F:/bmp_ext1_state.bin", " ", 55, ICON_POS_Y, event_handler, ID_INFO_EXT);
#endif
lv_obj_t *buttonFanstate = lv_big_button_create(scr, "F:/bmp_fan_state.bin", " ", 380, ICON_POS_Y, event_handler, ID_INFO_FAN);
labelExt1 = lv_label_create(scr, 55, LABEL_MOD_Y, nullptr);
labelExt1Target = lv_label_create(scr, 55, LABEL_MOD_Y, nullptr);
#if HAS_MULTI_EXTRUDER
labelExt2 = lv_label_create(scr, 163, LABEL_MOD_Y, nullptr);
labelExt2Target = lv_label_create(scr, 163, LABEL_MOD_Y, nullptr);
#if HAS_HEATED_BED
labelBed = lv_label_create(scr, 271, LABEL_MOD_Y, nullptr);
labelBedTarget = lv_label_create(scr, 271, LABEL_MOD_Y, nullptr);
#endif
#else
#if HAS_HEATED_BED
labelBed = lv_label_create(scr, 210, LABEL_MOD_Y, nullptr);
labelBedTarget = lv_label_create(scr, 210, LABEL_MOD_Y, nullptr);
#endif
#if HAS_MULTI_HOTEND
buttonExt2 = lv_big_button_create(scr, "F:/bmp_ext2_state.bin", " ", 163, ICON_POS_Y, event_handler, ID_INFO_EXT);
#endif
labelFan = lv_label_create(scr, 380, 80, nullptr);
itoa(thermalManager.degHotend(0), buf, 10);
lv_label_set_text(labelExt1, buf);
lv_obj_align(labelExt1, buttonExt1, LV_ALIGN_CENTER, 0, LABEL_MOD_Y);
sprintf_P(buf, PSTR("-> %d"), thermalManager.degTargetHotend(0));
lv_label_set_text(labelExt1Target, buf);
lv_obj_align(labelExt1Target, buttonExt1, LV_ALIGN_CENTER, 0, TARGET_LABEL_MOD_Y);
#if HAS_MULTI_EXTRUDER
itoa(thermalManager.degHotend(1), buf, 10);
lv_label_set_text(labelExt2, buf);
lv_obj_align(labelExt2, buttonExt2, LV_ALIGN_CENTER, 0, LABEL_MOD_Y);
sprintf_P(buf, PSTR("-> %d"), thermalManager.degTargetHotend(1));
lv_label_set_text(labelExt2Target, buf);
lv_obj_align(labelExt2Target, buttonExt2, LV_ALIGN_CENTER, 0, TARGET_LABEL_MOD_Y);
#endif
#if HAS_HEATED_BED
itoa(thermalManager.degBed(), buf, 10);
lv_label_set_text(labelBed, buf);
lv_obj_align(labelBed, buttonBedstate, LV_ALIGN_CENTER, 0, LABEL_MOD_Y);
sprintf_P(buf, PSTR("-> %d"), thermalManager.degTargetBed());
lv_label_set_text(labelBedTarget, buf);
lv_obj_align(labelBedTarget, buttonBedstate, LV_ALIGN_CENTER, 0, TARGET_LABEL_MOD_Y);
buttonBedstate = lv_big_button_create(scr, "F:/bmp_bed_state.bin", " ", TERN(HAS_MULTI_HOTEND, 271, 210), ICON_POS_Y, event_handler, ID_INFO_BED);
#endif
sprintf_P(buf, PSTR("%d%%"), (int)thermalManager.fanSpeedPercent(0));
lv_label_set_text(labelFan, buf);
lv_obj_align(labelFan, buttonFanstate, LV_ALIGN_CENTER, 0, LABEL_MOD_Y);
TERN_(HAS_HOTEND, labelExt1 = lv_label_create_empty(scr));
TERN_(HAS_MULTI_HOTEND, labelExt2 = lv_label_create_empty(scr));
TERN_(HAS_HEATED_BED, labelBed = lv_label_create_empty(scr));
TERN_(HAS_FAN, labelFan = lv_label_create_empty(scr));
lv_temp_refr();
}
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
@ -256,17 +216,25 @@ void lv_draw_ready_print() {
}
void lv_temp_refr() {
#if HAS_HOTEND
sprintf(public_buf_l, printing_menu.temp1, thermalManager.wholeDegHotend(0), thermalManager.degTargetHotend(0));
lv_label_set_text(labelExt1, public_buf_l);
lv_obj_align(labelExt1, buttonExt1, LV_ALIGN_OUT_BOTTOM_MID, 0, 0);
#endif
#if HAS_MULTI_HOTEND
sprintf(public_buf_l, printing_menu.temp1, thermalManager.wholeDegHotend(1), thermalManager.degTargetHotend(1));
lv_label_set_text(labelExt2, public_buf_l);
lv_obj_align(labelExt2, buttonExt2, LV_ALIGN_OUT_BOTTOM_MID, 0, 0);
#endif
#if HAS_HEATED_BED
sprintf(public_buf_l, printing_menu.bed_temp, thermalManager.wholeDegBed(), thermalManager.degTargetBed());
lv_label_set_text(labelBed, public_buf_l);
lv_obj_align(labelBed, buttonBedstate, LV_ALIGN_OUT_BOTTOM_MID, 0, 0);
#endif
sprintf(public_buf_l, printing_menu.temp1, thermalManager.wholeDegHotend(0), thermalManager.degTargetHotend(0));
lv_label_set_text(labelExt1, public_buf_l);
#if HAS_MULTI_EXTRUDER
sprintf(public_buf_l, printing_menu.temp1, thermalManager.wholeDegHotend(1), thermalManager.degTargetHotend(1));
lv_label_set_text(labelExt2, public_buf_l);
#if HAS_FAN
sprintf_P(public_buf_l, PSTR("%d%%"), (int)thermalManager.fanSpeedPercent(0));
lv_label_set_text(labelFan, public_buf_l);
lv_obj_align(labelFan, buttonFanstate, LV_ALIGN_OUT_BOTTOM_MID, 0, 0);
#endif
}

36
Marlin/src/lcd/extui/mks_ui/draw_ui.cpp
View file

@ -30,7 +30,6 @@
#include "pic_manager.h"
#include "draw_ui.h"
#include "mks_hardware_test.h"
#include <SPI.h>
@ -52,6 +51,10 @@
#include "draw_touch_calibration.h"
#endif
#if ENABLED(MKS_TEST)
#include "mks_hardware_test.h"
#endif
CFG_ITMES gCfgItems;
UI_CFG uiCfg;
DISP_STATE_STACK disp_state_stack;
@ -202,27 +205,27 @@ void ui_cfg_init() {
#if ENABLED(MKS_WIFI_MODULE)
memset(&wifiPara, 0, sizeof(wifiPara));
memset(&ipPara, 0, sizeof(ipPara));
strcpy(wifiPara.ap_name, WIFI_AP_NAME);
strcpy(wifiPara.keyCode, WIFI_KEY_CODE);
strcpy_P(wifiPara.ap_name, PSTR(WIFI_AP_NAME));
strcpy_P(wifiPara.keyCode, PSTR(WIFI_KEY_CODE));
//client
strcpy(ipPara.ip_addr, IP_ADDR);
strcpy(ipPara.mask, IP_MASK);
strcpy(ipPara.gate, IP_GATE);
strcpy(ipPara.dns, IP_DNS);
strcpy_P(ipPara.ip_addr, PSTR(IP_ADDR));
strcpy_P(ipPara.mask, PSTR(IP_MASK));
strcpy_P(ipPara.gate, PSTR(IP_GATE));
strcpy_P(ipPara.dns, PSTR(IP_DNS));
ipPara.dhcp_flag = IP_DHCP_FLAG;
//AP
strcpy(ipPara.dhcpd_ip, AP_IP_ADDR);
strcpy(ipPara.dhcpd_mask, AP_IP_MASK);
strcpy(ipPara.dhcpd_gate, AP_IP_GATE);
strcpy(ipPara.dhcpd_dns, AP_IP_DNS);
strcpy(ipPara.start_ip_addr, IP_START_IP);
strcpy(ipPara.end_ip_addr, IP_END_IP);
strcpy_P(ipPara.dhcpd_ip, PSTR(AP_IP_ADDR));
strcpy_P(ipPara.dhcpd_mask, PSTR(AP_IP_MASK));
strcpy_P(ipPara.dhcpd_gate, PSTR(AP_IP_GATE));
strcpy_P(ipPara.dhcpd_dns, PSTR(AP_IP_DNS));
strcpy_P(ipPara.start_ip_addr, PSTR(IP_START_IP));
strcpy_P(ipPara.end_ip_addr, PSTR(IP_END_IP));
ipPara.dhcpd_flag = AP_IP_DHCP_FLAG;
strcpy((char*)uiCfg.cloud_hostUrl, "baizhongyun.cn");
strcpy_P((char*)uiCfg.cloud_hostUrl, PSTR("baizhongyun.cn"));
uiCfg.cloud_port = 10086;
#endif
@ -1362,7 +1365,10 @@ void print_time_count() {
void LV_TASK_HANDLER() {
lv_task_handler();
if (mks_test_flag == 0x1E) mks_hardware_test();
#if ENABLED(MKS_TEST)
if (mks_test_flag == 0x1E) mks_hardware_test();
#endif
TERN_(HAS_GCODE_PREVIEW, disp_pre_gcode(2, 36));

16
Marlin/src/lcd/extui/mks_ui/irq_overrid.cpp
View file

@ -19,14 +19,14 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __STM32F1__
#include "../../../inc/MarlinConfigPre.h"
#if HAS_TFT_LVGL_UI
#if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE)
#include "tft_lvgl_configuration.h"
#if ENABLED(MKS_WIFI_MODULE)
#include "draw_ui.h"
#include "wifiSerial.h"
@ -46,15 +46,15 @@
#define WIFI_IO1_RESET() WRITE(WIFI_IO1_PIN, LOW);
void __irq_usart1() {
if ((USART1_BASE->CR1 & USART_CR1_RXNEIE) && (USART1_BASE->SR & USART_SR_RXNE))
WRITE(WIFI_IO1_PIN, HIGH);
if ((USART1_BASE->CR1 & USART_CR1_RXNEIE) && (USART1_BASE->SR & USART_SR_RXNE))
WRITE(WIFI_IO1_PIN, HIGH);
WIFISERIAL.wifi_usart_irq(USART1_BASE);
WIFISERIAL.wifi_usart_irq(USART1_BASE);
}
#ifdef __cplusplus
} /* C-declarations for C++ */
#endif
#endif // MKS_WIFI_MODULE
#endif // HAS_TFT_LVGL_UI
#endif // HAS_TFT_LVGL_UI && MKS_WIFI_MODULE
#endif // __STM32F1__

140
Marlin/src/lcd/extui/mks_ui/mks_hardware_test.cpp
View file

@ -27,7 +27,6 @@
#include "tft_lvgl_configuration.h"
#include "draw_ready_print.h"
#include "mks_hardware_test.h"
#include "draw_ui.h"
#include "pic_manager.h"
#include <lvgl.h>
@ -36,51 +35,47 @@
#include "../../../module/temperature.h"
#include "../../../sd/cardreader.h"
uint8_t pw_det_sta, pw_off_sta, mt_det_sta, mt_det3_sta;
#if PIN_EXISTS(MT_DET_2)
uint8_t mt_det2_sta;
#endif
uint8_t endstopx1_sta, endstopx2_sta, endstopy1_sta, endstopy2_sta, endstopz1_sta, endstopz2_sta;
void test_gpio_readlevel_L() {
#if ENABLED(MKS_TEST)
volatile uint32_t itest;
#if ENABLED(MKS_TEST)
#include "mks_hardware_test.h"
bool pw_det_sta, pw_off_sta, mt_det_sta;
#if PIN_EXISTS(MT_DET_2)
bool mt_det2_sta;
#endif
bool endstopx1_sta, endstopx2_sta, endstopy1_sta, endstopy2_sta, endstopz1_sta, endstopz2_sta;
void test_gpio_readlevel_L() {
WRITE(WIFI_IO0_PIN, HIGH);
itest = 10000;
while (itest--);
pw_det_sta = (READ(MKS_TEST_POWER_LOSS_PIN) == 0);
pw_off_sta = (READ(MKS_TEST_PS_ON_PIN) == 0);
mt_det_sta = (READ(MT_DET_1_PIN) == 0);
delay(10);
pw_det_sta = (READ(MKS_TEST_POWER_LOSS_PIN) == LOW);
pw_off_sta = (READ(MKS_TEST_PS_ON_PIN) == LOW);
mt_det_sta = (READ(MT_DET_1_PIN) == LOW);
#if PIN_EXISTS(MT_DET_2)
mt_det2_sta = (READ(MT_DET_2_PIN) == 0);
mt_det2_sta = (READ(MT_DET_2_PIN) == LOW);
#endif
endstopx1_sta = (READ(X_MIN_PIN) == 0);
endstopy1_sta = (READ(Y_MIN_PIN) == 0);
endstopz1_sta = (READ(Z_MIN_PIN) == 0);
endstopz2_sta = (READ(Z_MAX_PIN) == 0);
#endif
}
endstopx1_sta = (READ(X_MIN_PIN) == LOW);
endstopy1_sta = (READ(Y_MIN_PIN) == LOW);
endstopz1_sta = (READ(Z_MIN_PIN) == LOW);
endstopz2_sta = (READ(Z_MAX_PIN) == LOW);
}
void test_gpio_readlevel_H() {
#if ENABLED(MKS_TEST)
volatile uint32_t itest;
void test_gpio_readlevel_H() {
WRITE(WIFI_IO0_PIN, LOW);
itest = 10000;
while (itest--);
pw_det_sta = (READ(MKS_TEST_POWER_LOSS_PIN) == 1);
pw_off_sta = (READ(MKS_TEST_PS_ON_PIN) == 1);
mt_det_sta = (READ(MT_DET_1_PIN) == 1);
delay(10);
pw_det_sta = (READ(MKS_TEST_POWER_LOSS_PIN) == HIGH);
pw_off_sta = (READ(MKS_TEST_PS_ON_PIN) == HIGH);
mt_det_sta = (READ(MT_DET_1_PIN) == HIGH);
#if PIN_EXISTS(MT_DET_2)
mt_det2_sta = (READ(MT_DET_2_PIN) == 1);
mt_det2_sta = (READ(MT_DET_2_PIN) == HIGH);
#endif
endstopx1_sta = (READ(X_MIN_PIN) == 1);
endstopy1_sta = (READ(Y_MIN_PIN) == 1);
endstopz1_sta = (READ(Z_MIN_PIN) == 1);
endstopz2_sta = (READ(Z_MAX_PIN) == 1);
#endif
}
endstopx1_sta = (READ(X_MIN_PIN) == HIGH);
endstopy1_sta = (READ(Y_MIN_PIN) == HIGH);
endstopz1_sta = (READ(Z_MIN_PIN) == HIGH);
endstopz2_sta = (READ(Z_MAX_PIN) == HIGH);
}
void init_test_gpio() {
#ifdef MKS_TEST
void init_test_gpio() {
SET_INPUT_PULLUP(X_MIN_PIN);
SET_INPUT_PULLUP(Y_MIN_PIN);
SET_INPUT_PULLUP(Z_MIN_PIN);
@ -102,7 +97,7 @@ void init_test_gpio() {
SET_OUTPUT(Y_ENABLE_PIN);
SET_OUTPUT(Z_ENABLE_PIN);
SET_OUTPUT(E0_ENABLE_PIN);
#if !MB(MKS_ROBIN_E3P)
#if DISABLED(MKS_HARDWARE_TEST_ONLY_E0)
SET_OUTPUT(E1_ENABLE_PIN);
#endif
@ -110,11 +105,11 @@ void init_test_gpio() {
WRITE(Y_ENABLE_PIN, LOW);
WRITE(Z_ENABLE_PIN, LOW);
WRITE(E0_ENABLE_PIN, LOW);
#if !MB(MKS_ROBIN_E3P)
#if DISABLED(MKS_HARDWARE_TEST_ONLY_E0)
WRITE(E1_ENABLE_PIN, LOW);
#endif
#if MB(MKS_ROBIN_E3P)
#if ENABLED(MKS_HARDWARE_TEST_ONLY_E0)
SET_INPUT_PULLUP(PA1);
SET_INPUT_PULLUP(PA3);
SET_INPUT_PULLUP(PC2);
@ -123,68 +118,56 @@ void init_test_gpio() {
SET_INPUT_PULLUP(PE6);
SET_INPUT_PULLUP(PE7);
#endif
#endif
}
}
void mks_test_beeper() {
#ifdef MKS_TEST
void mks_test_beeper() {
WRITE(BEEPER_PIN, HIGH);
delay(100);
WRITE(BEEPER_PIN, LOW);
delay(100);
#endif
}
}
void mks_gpio_test() {
#if ENABLED(MKS_TEST)
void mks_gpio_test() {
init_test_gpio();
test_gpio_readlevel_L();
test_gpio_readlevel_H();
test_gpio_readlevel_L();
if ((pw_det_sta == 1)
&& (pw_off_sta == 1)
&& (mt_det_sta == 1)
if (pw_det_sta && pw_off_sta && mt_det_sta
#if PIN_EXISTS(MT_DET_2)
&& (mt_det2_sta == 1)
&& mt_det2_sta
#endif
#if MB(MKS_ROBIN_E3P)
&& (READ(PA1) == 0)
&& (READ(PA3) == 0)
&& (READ(PC2) == 0)
&& (READ(PD8) == 0)
&& (READ(PE5) == 0)
&& (READ(PE6) == 0)
&& (READ(PE7) == 0)
#if ENABLED(MKS_HARDWARE_TEST_ONLY_E0)
&& (READ(PA1) == LOW)
&& (READ(PA3) == LOW)
&& (READ(PC2) == LOW)
&& (READ(PD8) == LOW)
&& (READ(PE5) == LOW)
&& (READ(PE6) == LOW)
&& (READ(PE7) == LOW)
#endif
)
disp_det_ok();
else
disp_det_error();
if ( (endstopx1_sta == 1)
&& (endstopy1_sta == 1)
&& (endstopz1_sta == 1)
&& (endstopz2_sta == 1)
)
if (endstopx1_sta && endstopy1_sta && endstopz1_sta && endstopz2_sta)
disp_Limit_ok();
else
disp_Limit_error();
#endif
}
}
void mks_hardware_test() {
#if ENABLED(MKS_TEST)
void mks_hardware_test() {
if (millis() % 2000 < 1000) {
WRITE(X_DIR_PIN, LOW);
WRITE(Y_DIR_PIN, LOW);
WRITE(Z_DIR_PIN, LOW);
WRITE(E0_DIR_PIN, LOW);
#if !MB(MKS_ROBIN_E3P)
#if DISABLED(MKS_HARDWARE_TEST_ONLY_E0)
WRITE(E1_DIR_PIN, LOW);
#endif
thermalManager.fan_speed[0] = 255;
#if !MB(MKS_ROBIN_E3P)
#if DISABLED(MKS_HARDWARE_TEST_ONLY_E0)
WRITE(HEATER_1_PIN, HIGH); // HE1
#endif
WRITE(HEATER_0_PIN, HIGH); // HE0
@ -195,21 +178,18 @@ void mks_hardware_test() {
WRITE(Y_DIR_PIN, HIGH);
WRITE(Z_DIR_PIN, HIGH);
WRITE(E0_DIR_PIN, HIGH);
#if !MB(MKS_ROBIN_E3P)
#if DISABLED(MKS_HARDWARE_TEST_ONLY_E0)
WRITE(E1_DIR_PIN, HIGH);
#endif
thermalManager.fan_speed[0] = 0;
#if !MB(MKS_ROBIN_E3P)
#if DISABLED(MKS_HARDWARE_TEST_ONLY_E0)
WRITE(HEATER_1_PIN, LOW); // HE1
#endif
WRITE(HEATER_0_PIN, LOW); // HE0
WRITE(HEATER_BED_PIN, LOW); // HOT-BED
}
if ( (endstopx1_sta == 1) && (endstopx2_sta == 1)
&& (endstopy1_sta == 1) && (endstopy2_sta == 1)
&& (endstopz1_sta == 1) && (endstopz2_sta == 1)
) {
if (endstopx1_sta && endstopx2_sta && endstopy1_sta && endstopy2_sta && endstopz1_sta && endstopz2_sta) {
// nothing here
}
else {
@ -217,9 +197,9 @@ void mks_hardware_test() {
if (disp_state == PRINT_READY_UI)
mks_disp_test();
}
#endif
}
#endif // MKS_TEST
static const uint16_t ASCII_Table_16x24[] PROGMEM = {
// Space ' '

6
Marlin/src/lcd/extui/mks_ui/mks_hardware_test.h
View file

@ -24,10 +24,12 @@
#include <lvgl.h>
void mks_gpio_test();
void mks_hardware_test();
void mks_test_get();
void disp_char_1624(uint16_t x, uint16_t y, uint8_t c, uint16_t charColor, uint16_t bkColor);
void disp_string(uint16_t x, uint16_t y, const char * string, uint16_t charColor, uint16_t bkColor);
void mks_hardware_test();
void disp_assets_update();
void disp_assets_update_progress(const char *msg);
void mks_test_get();
extern uint8_t mks_test_flag;

5
Marlin/src/lcd/extui/mks_ui/pic_manager.cpp
View file

@ -27,7 +27,10 @@
#include "draw_ui.h"
#include "pic_manager.h"
#include "draw_ready_print.h"
#include "mks_hardware_test.h"
#if ENABLED(MKS_TEST)
#include "mks_hardware_test.h"
#endif
#include "SPIFlashStorage.h"
#include "../../../libs/W25Qxx.h"

37
Marlin/src/lcd/extui/mks_ui/printer_operation.cpp
View file

@ -158,19 +158,12 @@ void filament_pin_setup() {
}
void filament_check() {
const int FIL_DELAY = 20;
#if ANY_PIN(MT_DET_1, MT_DET_2, MT_DET_3)
const int FIL_DELAY = 20;
#endif
#if PIN_EXISTS(MT_DET_1)
static int fil_det_count_1 = 0;
if (!READ(MT_DET_1_PIN) && !MT_DET_PIN_INVERTING)
fil_det_count_1++;
else if (READ(MT_DET_1_PIN) && MT_DET_PIN_INVERTING)
fil_det_count_1++;
else if (fil_det_count_1 > 0)
fil_det_count_1--;
if (!READ(MT_DET_1_PIN) && !MT_DET_PIN_INVERTING)
fil_det_count_1++;
else if (READ(MT_DET_1_PIN) && MT_DET_PIN_INVERTING)
if (READ(MT_DET_1_PIN) == MT_DET_PIN_INVERTING)
fil_det_count_1++;
else if (fil_det_count_1 > 0)
fil_det_count_1--;
@ -178,16 +171,7 @@ void filament_check() {
#if PIN_EXISTS(MT_DET_2)
static int fil_det_count_2 = 0;
if (!READ(MT_DET_2_PIN) && !MT_DET_PIN_INVERTING)
fil_det_count_2++;
else if (READ(MT_DET_2_PIN) && MT_DET_PIN_INVERTING)
fil_det_count_2++;
else if (fil_det_count_2 > 0)
fil_det_count_2--;
if (!READ(MT_DET_2_PIN) && !MT_DET_PIN_INVERTING)
fil_det_count_2++;
else if (READ(MT_DET_2_PIN) && MT_DET_PIN_INVERTING)
if (READ(MT_DET_2_PIN) == MT_DET_PIN_INVERTING)
fil_det_count_2++;
else if (fil_det_count_2 > 0)
fil_det_count_2--;
@ -195,16 +179,7 @@ void filament_check() {
#if PIN_EXISTS(MT_DET_3)
static int fil_det_count_3 = 0;
if (!READ(MT_DET_3_PIN) && !MT_DET_PIN_INVERTING)
fil_det_count_3++;
else if (READ(MT_DET_3_PIN) && MT_DET_PIN_INVERTING)
fil_det_count_3++;
else if (fil_det_count_3 > 0)
fil_det_count_3--;
if (!READ(MT_DET_3_PIN) && !MT_DET_PIN_INVERTING)
fil_det_count_3++;
else if (READ(MT_DET_3_PIN) && MT_DET_PIN_INVERTING)
if (READ(MT_DET_3_PIN) == MT_DET_PIN_INVERTING)
fil_det_count_3++;
else if (fil_det_count_3 > 0)
fil_det_count_3--;

33
Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp
View file

@ -45,6 +45,14 @@ XPT2046 touch;
#include "../../../feature/powerloss.h"
#endif
#if HAS_SERVOS
#include "../../../module/servo.h"
#endif
#if EITHER(PROBE_TARE, HAS_Z_SERVO_PROBE)
#include "../../../module/probe.h"
#endif
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
#include "../../tft_io/touch_calibration.h"
#include "draw_touch_calibration.h"
@ -131,10 +139,9 @@ void tft_lvgl_init() {
#if ENABLED(SDSUPPORT)
UpdateAssets();
watchdog_refresh(); // LVGL init takes time
mks_test_get();
#endif
mks_test_get();
touch.Init();
lv_init();
@ -193,8 +200,12 @@ void tft_lvgl_init() {
filament_pin_setup();
lv_encoder_pin_init();
TERN_(MKS_WIFI_MODULE, mks_wifi_firmware_update());
#if ENABLED(MKS_WIFI_MODULE)
mks_esp_wifi_init();
mks_wifi_firmware_update();
#endif
TERN_(HAS_SERVOS, servo_init());
TERN_(HAS_Z_SERVO_PROBE, probe.servo_probe_init());
bool ready = true;
#if ENABLED(POWER_LOSS_RECOVERY)
recovery.load();
@ -207,16 +218,22 @@ void tft_lvgl_init() {
uiCfg.print_state = REPRINTING;
strncpy(public_buf_m, recovery.info.sd_filename, sizeof(public_buf_m));
card.printLongPath(public_buf_m);
strncpy(list_file.long_name[sel_id], card.longFilename, sizeof(list_file.long_name[0]));
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
strncpy(public_buf_m, recovery.info.sd_filename, sizeof(public_buf_m));
card.printLongPath(public_buf_m);
strncpy(list_file.long_name[sel_id], card.longFilename, sizeof(list_file.long_name[0]));
#else
strncpy(list_file.long_name[sel_id], recovery.info.sd_filename, sizeof(list_file.long_name[0]));
#endif
lv_draw_printing();
}
#endif
if (ready) lv_draw_ready_print();
if (mks_test_flag == 0x1E) mks_gpio_test();
#if ENABLED(MKS_TEST)
if (mks_test_flag == 0x1E) mks_gpio_test();
#endif
}
void my_disp_flush(lv_disp_drv_t * disp, const lv_area_t * area, lv_color_t * color_p) {

34
Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp
View file

@ -58,6 +58,8 @@ pause_msg_def pause_msg_menu;
eeprom_def eeprom_menu;
media_select_menu_def media_select_menu;
// TODO: Make all strings PSTR and update accessors for the benefit of AVR
machine_common_def machine_menu;
void machine_setting_disp() {
if (gCfgItems.language == LANG_SIMPLE_CHINESE) {
@ -1093,8 +1095,8 @@ void disp_language_init() {
eeprom_menu.read = EEPROM_SETTINGS_READ_CN;
eeprom_menu.revert = EEPROM_SETTINGS_REVERT_CN;
eeprom_menu.storeTips = EEPROM_STORE_TIPS_CN;
eeprom_menu.readTips = EEPROM_READ_TIPS_CN;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_CN;
eeprom_menu.readTips = EEPROM_READ_TIPS_CN;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_CN;
break;
#if 1
@ -1337,8 +1339,8 @@ void disp_language_init() {
eeprom_menu.read = EEPROM_SETTINGS_READ_T_CN;
eeprom_menu.revert = EEPROM_SETTINGS_REVERT_T_CN;
eeprom_menu.storeTips = EEPROM_STORE_TIPS_T_CN;
eeprom_menu.readTips = EEPROM_READ_TIPS_T_CN;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_T_CN;
eeprom_menu.readTips = EEPROM_READ_TIPS_T_CN;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_T_CN;
break;
case LANG_ENGLISH:
common_menu.dialog_confirm_title = TITLE_DIALOG_CONFIRM_EN;
@ -1571,8 +1573,8 @@ void disp_language_init() {
eeprom_menu.read = EEPROM_SETTINGS_READ_EN;
eeprom_menu.revert = EEPROM_SETTINGS_REVERT_EN;
eeprom_menu.storeTips = EEPROM_STORE_TIPS_EN;
eeprom_menu.readTips = EEPROM_READ_TIPS_EN;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_EN;
eeprom_menu.readTips = EEPROM_READ_TIPS_EN;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_EN;
break;
case LANG_RUSSIAN:
common_menu.dialog_confirm_title = TITLE_DIALOG_CONFIRM_RU;
@ -1896,8 +1898,8 @@ void disp_language_init() {
eeprom_menu.read = EEPROM_SETTINGS_READ_RU;
eeprom_menu.revert = EEPROM_SETTINGS_REVERT_RU;
eeprom_menu.storeTips = EEPROM_STORE_TIPS_RU;
eeprom_menu.readTips = EEPROM_READ_TIPS_RU;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_RU;
eeprom_menu.readTips = EEPROM_READ_TIPS_RU;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_RU;
break;
case LANG_SPANISH:
common_menu.dialog_confirm_title = TITLE_DIALOG_CONFIRM_SP;
@ -2133,8 +2135,8 @@ void disp_language_init() {
eeprom_menu.read = EEPROM_SETTINGS_READ_SP;
eeprom_menu.revert = EEPROM_SETTINGS_REVERT_SP;
eeprom_menu.storeTips = EEPROM_STORE_TIPS_SP;
eeprom_menu.readTips = EEPROM_READ_TIPS_SP;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_SP;
eeprom_menu.readTips = EEPROM_READ_TIPS_SP;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_SP;
break;
#endif // if 1
@ -2367,8 +2369,8 @@ void disp_language_init() {
eeprom_menu.read = EEPROM_SETTINGS_READ_FR;
eeprom_menu.revert = EEPROM_SETTINGS_REVERT_FR;
eeprom_menu.storeTips = EEPROM_STORE_TIPS_FR;
eeprom_menu.readTips = EEPROM_READ_TIPS_FR;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_FR;
eeprom_menu.readTips = EEPROM_READ_TIPS_FR;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_FR;
break;
case LANG_ITALY:
@ -2600,8 +2602,8 @@ void disp_language_init() {
eeprom_menu.read = EEPROM_SETTINGS_READ_IT;
eeprom_menu.revert = EEPROM_SETTINGS_REVERT_IT;
eeprom_menu.storeTips = EEPROM_STORE_TIPS_IT;
eeprom_menu.readTips = EEPROM_READ_TIPS_IT;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_IT;
eeprom_menu.readTips = EEPROM_READ_TIPS_IT;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_IT;
break;
#endif // if 1
@ -2836,8 +2838,8 @@ void disp_language_init() {
eeprom_menu.read = EEPROM_SETTINGS_READ_EN;
eeprom_menu.revert = EEPROM_SETTINGS_REVERT_EN;
eeprom_menu.storeTips = EEPROM_STORE_TIPS_EN;
eeprom_menu.readTips = EEPROM_READ_TIPS_EN;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_EN;
eeprom_menu.readTips = EEPROM_READ_TIPS_EN;
eeprom_menu.revertTips = EEPROM_REVERT_TIPS_EN;
break;
}
}

76
Marlin/src/lcd/extui/mks_ui/wifiSerial.h
View file

@ -21,10 +21,6 @@
*/
#pragma once
#include "tft_lvgl_configuration.h"
#if ENABLED(MKS_WIFI_MODULE)
#ifdef SERIAL_PORT_2
#error "SERIAL_PORT_2 must be disabled with TFT_LVGL_UI* and MKS_WIFI_MODULE."
#endif
@ -33,70 +29,16 @@
#define WIFI_UPLOAD_BAUDRATE 1958400
#define USART_SAFE_INSERT
#define WIFI_RX_BUF_SIZE (1024+1)
#define WIFI_RX_BUF_SIZE (1024)
#define WIFI_TX_BUF_SIZE (64)
#include <libmaple/libmaple_types.h>
#include <libmaple/usart.h>
#include <libmaple/libmaple.h>
#include <libmaple/gpio.h>
#include <libmaple/timer.h>
#include <libmaple/ring_buffer.h>
#include "tft_lvgl_configuration.h"
#define DEFINE_WFSERIAL(name, n)\
WifiSerial name(USART##n, \
BOARD_USART##n##_TX_PIN, \
BOARD_USART##n##_RX_PIN)
class WifiSerial {
public:
uint8 wifiRxBuf[WIFI_RX_BUF_SIZE];
public:
WifiSerial(struct usart_dev *usart_device, uint8 tx_pin, uint8 rx_pin);
/* Set up/tear down */
void begin(uint32 baud);
void begin(uint32 baud,uint8_t config);
void end();
int available();
int read();
int write(uint8_t);
inline void wifi_usart_irq(usart_reg_map *regs) {
/* Handling RXNEIE and TXEIE interrupts.
* RXNE signifies availability of a byte in DR.
*
* See table 198 (sec 27.4, p809) in STM document RM0008 rev 15.
* We enable RXNEIE.
*/
if ((regs->CR1 & USART_CR1_RXNEIE) && (regs->SR & USART_SR_RXNE)) {
#ifdef USART_SAFE_INSERT
/* If the buffer is full and the user defines USART_SAFE_INSERT,
* ignore new bytes. */
rb_safe_insert(this->usart_device->rb, (uint8)regs->DR);
#else
/* By default, push bytes around in the ring buffer. */
rb_push_insert(this->usart_device->rb, (uint8)regs->DR);
#endif
}
/* TXE signifies readiness to send a byte to DR. */
if ((regs->CR1 & USART_CR1_TXEIE) && (regs->SR & USART_SR_TXE)) {
if (!rb_is_empty(this->usart_device->wb))
regs->DR=rb_remove(this->usart_device->wb);
else
regs->CR1 &= ~((uint32)USART_CR1_TXEIE); // disable TXEIE
}
}
int wifi_rb_is_full();
struct usart_dev *usart_device;
private:
uint8 tx_pin;
uint8 rx_pin;
};
#ifdef __STM32F1__
#include "wifiSerial_STM32F1.h"
#else
#include "wifiSerial_STM32.h"
#endif
extern WifiSerial WifiSerial1;
#define WIFISERIAL WifiSerial1
#endif // MKS_WIFI_MODULE
#define WIFISERIAL WifiSerial1

352
Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.cpp Normal file
View file

@ -0,0 +1,352 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1)
#include "../../../inc/MarlinConfigPre.h"
#if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE)
#include "tft_lvgl_configuration.h"
#include "draw_ui.h"
#include "wifiSerial.h"
WifiSerial WifiSerial1(USART1);
void WifiSerial::setRx(uint32_t _rx) { _serial.pin_rx = digitalPinToPinName(_rx); }
void WifiSerial::setTx(uint32_t _tx) { _serial.pin_tx = digitalPinToPinName(_tx); }
void WifiSerial::setRx(PinName _rx) { _serial.pin_rx = _rx; }
void WifiSerial::setTx(PinName _tx) { _serial.pin_tx = _tx; }
void WifiSerial::init(PinName _rx, PinName _tx) {
_serial.pin_rx = (_rx == _tx) ? NC : _rx;
_serial.pin_tx = _tx;
_serial.rx_buff = wifiRxBuf;
_serial.rx_head = 0;
_serial.rx_tail = 0;
_serial.tx_buff = wifiTxBuf;
_serial.tx_head = 0;
_serial.tx_tail = 0;
}
WifiSerial::WifiSerial(void *peripheral) {
// If PIN_SERIALy_RX is not defined assume half-duplex
_serial.pin_rx = NC;
// If Serial is defined in variant set
// the Rx/Tx pins for com port if defined
#if defined(Serial) && defined(PIN_SERIAL_TX)
if ((void *)this == (void *)&Serial) {
#ifdef PIN_SERIAL_RX
setRx(PIN_SERIAL_RX);
#endif
setTx(PIN_SERIAL_TX);
} else
#endif
#if defined(PIN_SERIAL1_TX) && defined(USART1_BASE)
if (peripheral == USART1) {
#ifdef PIN_SERIAL1_RX
setRx(PIN_SERIAL1_RX);
#endif
setTx(PIN_SERIAL1_TX);
} else
#endif
#if defined(PIN_SERIAL2_TX) && defined(USART2_BASE)
if (peripheral == USART2) {
#ifdef PIN_SERIAL2_RX
setRx(PIN_SERIAL2_RX);
#endif
setTx(PIN_SERIAL2_TX);
} else
#endif
#if defined(PIN_SERIAL3_TX) && defined(USART3_BASE)
if (peripheral == USART3) {
#ifdef PIN_SERIAL3_RX
setRx(PIN_SERIAL3_RX);
#endif
setTx(PIN_SERIAL3_TX);
} else
#endif
#ifdef PIN_SERIAL4_TX
if (false
#ifdef USART4_BASE
|| peripheral == USART4
#elif defined(UART4_BASE)
|| peripheral == UART4
#endif
) {
#ifdef PIN_SERIAL4_RX
setRx(PIN_SERIAL4_RX);
#endif
setTx(PIN_SERIAL4_TX);
} else
#endif
#ifdef PIN_SERIAL5_TX
if (false
#ifdef USART5_BASE
|| peripheral == USART5
#elif defined(UART5_BASE)
|| peripheral == UART5
#endif
) {
#ifdef PIN_SERIAL5_RX
setRx(PIN_SERIAL5_RX);
#endif
setTx(PIN_SERIAL5_TX);
} else
#endif
#if defined(PIN_SERIAL6_TX) && defined(USART6_BASE)
if (peripheral == USART6) {
#ifdef PIN_SERIAL6_RX
setRx(PIN_SERIAL6_RX);
#endif
setTx(PIN_SERIAL6_TX);
} else
#endif
#ifdef PIN_SERIAL7_TX
if (false
#ifdef USART7_BASE
|| peripheral == USART7
#elif defined(UART7_BASE)
|| peripheral == UART7
#endif
) {
#ifdef PIN_SERIAL7_RX
setRx(PIN_SERIAL7_RX);
#endif
setTx(PIN_SERIAL7_TX);
} else
#endif
#ifdef PIN_SERIAL8_TX
if (false
#ifdef USART8_BASE
|| peripheral == USART8
#elif defined(UART8_BASE)
|| peripheral == UART8
#endif
) {
#ifdef PIN_SERIAL8_RX
setRx(PIN_SERIAL8_RX);
#endif
setTx(PIN_SERIAL8_TX);
} else
#endif
#if defined(PIN_SERIAL9_TX) && defined(UART9_BASE)
if (peripheral == UART9) {
#ifdef PIN_SERIAL9_RX
setRx(PIN_SERIAL9_RX);
#endif
setTx(PIN_SERIAL9_TX);
} else
#endif
#ifdef PIN_SERIAL10_TX
if (false
#ifdef USART10_BASE
|| peripheral == USART10
#elif defined(UART10_BASE)
|| peripheral == UART10
#endif
) {
#ifdef PIN_SERIAL10_RX
setRx(PIN_SERIAL10_RX);
#endif
setTx(PIN_SERIAL10_TX);
} else
#endif
#if defined(PIN_SERIALLP1_TX) && defined(LPUART1_BASE)
if (peripheral == LPUART1) {
#ifdef PIN_SERIALLP1_RX
setRx(PIN_SERIALLP1_RX);
#endif
setTx(PIN_SERIALLP1_TX);
} else
#endif
// else get the pins of the first peripheral occurrence in PinMap
{
_serial.pin_rx = pinmap_pin(peripheral, PinMap_UART_RX);
_serial.pin_tx = pinmap_pin(peripheral, PinMap_UART_TX);
}
//if (halfDuplex == HALF_DUPLEX_ENABLED) _serial.pin_rx = NC;
init(_serial.pin_rx, _serial.pin_tx);
}
void WifiSerial::flush() {
// If we have never written a byte, no need to flush. This special
// case is needed since there is no way to force the TXC (transmit
// complete) bit to 1 during initialization
if (!_written) return;
while ((_serial.tx_head != _serial.tx_tail)) {
// nop, the interrupt handler will free up space for us
}
// If we get here, nothing is queued anymore (DRIE is disabled) and
// the hardware finished tranmission (TXC is set).
}
bool WifiSerial::isHalfDuplex() const { return _serial.pin_rx == NC; }
void WifiSerial::enableHalfDuplexRx() {
if (isHalfDuplex()) {
// In half-duplex mode we have to wait for all TX characters to
// be transmitted before we can receive data.
flush();
if (!_rx_enabled) {
_rx_enabled = true;
uart_enable_rx(&_serial);
}
}
}
// Actual interrupt handlers //////////////////////////////////////////////////////////////
void WifiSerial::_rx_complete_irq(serial_t *obj) {
// No Parity error, read byte and store it in the buffer if there is room
unsigned char c;
if (uart_getc(obj, &c) == 0) {
WRITE(WIFI_IO1_PIN, HIGH);
rx_buffer_index_t i = (unsigned int)(obj->rx_head + 1) % WIFI_RX_BUF_SIZE;
// if we should be storing the received character into the location
// just before the tail (meaning that the head would advance to the
// current location of the tail), we're about to overflow the buffer
// and so we don't write the character or advance the head.
if (i != obj->rx_tail) {
obj->rx_buff[obj->rx_head] = c;
obj->rx_head = i;
}
}
}
// Actual interrupt handlers //////////////////////////////////////////////////////////////
int WifiSerial::_tx_complete_irq(serial_t *obj) {
// If interrupts are enabled, there must be more data in the output
// buffer. Send the next byte
obj->tx_tail = (obj->tx_tail + 1) % WIFI_TX_BUF_SIZE;
return (obj->tx_head == obj->tx_tail) ? -1 : 0;
}
void WifiSerial::begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
void WifiSerial::begin(unsigned long baud, byte config) {
uint32_t databits = 0, stopbits = 0, parity = 0;
_baud = baud;
_config = config;
// Manage databits
switch (config & 0x07) {
case 0x02: databits = 6; break;
case 0x04: databits = 7; break;
case 0x06: databits = 8; break;
default: databits = 0; break;
}
if ((config & 0x30) == 0x30) {
parity = UART_PARITY_ODD;
databits++;
}
else if ((config & 0x20) == 0x20) {
parity = UART_PARITY_EVEN;
databits++;
}
else
parity = UART_PARITY_NONE;
stopbits = ((config & 0x08) == 0x08) ? UART_STOPBITS_2 : UART_STOPBITS_1;
switch (databits) {
#ifdef UART_WORDLENGTH_7B
case 7: databits = UART_WORDLENGTH_7B; break;
#endif
case 8: databits = UART_WORDLENGTH_8B; break;
case 9: databits = UART_WORDLENGTH_9B; break;
default:
case 0: Error_Handler(); break;
}
uart_init(&_serial, (uint32_t)baud, databits, parity, stopbits);
enableHalfDuplexRx();
if (baud == WIFI_BAUDRATE)
uart_attach_rx_callback(&_serial, _rx_complete_irq);
else
USART1->CR1 |= USART_CR1_RE; // Preserve word length, etc. Use 'or' to preserve USART_CR1_M_8N1
}
void WifiSerial::end() {
// wait for transmission of outgoing data
flush();
uart_deinit(&_serial);
// clear any received data
_serial.rx_head = _serial.rx_tail;
}
int WifiSerial::available() {
return ((unsigned int)(WIFI_RX_BUF_SIZE + _serial.rx_head - _serial.rx_tail)) % WIFI_RX_BUF_SIZE;
}
//
// I/O
//
int WifiSerial::read() {
enableHalfDuplexRx();
// if the head isn't ahead of the tail, we don't have any characters
if (_serial.rx_head == _serial.rx_tail) return -1;
unsigned char c = _serial.rx_buff[_serial.rx_tail];
_serial.rx_tail = (rx_buffer_index_t)(_serial.rx_tail + 1) % WIFI_RX_BUF_SIZE;
return c;
}
int WifiSerial::write(uint8_t c) {
_written = true;
if (isHalfDuplex()) {
if (_rx_enabled) {
_rx_enabled = false;
uart_enable_tx(&_serial);
}
}
tx_buffer_index_t i = (_serial.tx_head + 1) % WIFI_TX_BUF_SIZE;
// If the output buffer is full, there's nothing for it other than to
// wait for the interrupt handler to empty it a bit
while (i == _serial.tx_tail) {
// nop, the interrupt handler will free up space for us
}
_serial.tx_buff[_serial.tx_head] = c;
_serial.tx_head = i;
if (!serial_tx_active(&_serial))
uart_attach_tx_callback(&_serial, _tx_complete_irq);
return 1;
}
#endif // HAS_TFT_LVGL_UI && MKS_WIFI_MODULE
#endif // !__STM32F1__

63
Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.h Normal file
View file

@ -0,0 +1,63 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <inttypes.h>
#include "Stream.h"
#include "uart.h"
class WifiSerial {
protected:
// Has any byte been written to the UART since begin()
bool _written;
serial_t _serial;
public:
uint8_t wifiRxBuf[WIFI_RX_BUF_SIZE];
uint8_t wifiTxBuf[WIFI_TX_BUF_SIZE];
WifiSerial(void *peripheral);
// Set up / tear down
void begin(uint32_t baud);
void begin(uint32_t baud,uint8_t config);
void end();
int available(void);
int read(void);
int write(uint8_t);
// Interrupt handlers
static int _tx_complete_irq(serial_t *obj);
static void _rx_complete_irq(serial_t *obj);
void flush(void);
bool isHalfDuplex(void) const;
void enableHalfDuplexRx(void);
private:
void setRx(uint32_t _rx);
void setTx(uint32_t _tx);
void setRx(PinName _rx);
void setTx(PinName _tx);
void init(PinName _rx, PinName _tx);
bool _rx_enabled;
uint8_t _config;
unsigned long _baud;
};

18
Marlin/src/lcd/extui/mks_ui/wifiSerial.cpp → Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32F1.cpp
View file

@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@ -19,14 +19,14 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __STM32F1__
#include "../../../inc/MarlinConfigPre.h"
#if HAS_TFT_LVGL_UI
#if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE)
#include "tft_lvgl_configuration.h"
#if ENABLED(MKS_WIFI_MODULE)
#include "draw_ui.h"
#include "wifiSerial.h"
@ -59,19 +59,19 @@ WifiSerial::WifiSerial(usart_dev *usart_device, uint8 tx_pin, uint8 rx_pin) {
if (with_irq) usart_enable(usart_device);
else {
usart_reg_map *regs = usart_device->regs;
regs->CR1 |= (USART_CR1_TE | USART_CR1_RE); // don't change the word length etc, and 'or' in the pattern not overwrite |USART_CR1_M_8N1);
regs->CR1 |= (USART_CR1_TE | USART_CR1_RE); // Preserve word length, etc. Use 'or' to preserve USART_CR1_M_8N1
regs->CR1 |= USART_CR1_UE;
}
}
#elif STM32_MCU_SERIES == STM32_SERIES_F2 || STM32_MCU_SERIES == STM32_SERIES_F4
#define disable_timer_if_necessary(dev, ch) ((void)0)
#define disable_timer_if_necessary(dev, ch) NOOP
static void usart_enable_no_irq(usart_dev *usart_device, bool with_irq) {
if (with_irq) usart_enable(usart_device);
else {
usart_reg_map *regs = usart_device->regs;
regs->CR1 |= (USART_CR1_TE | USART_CR1_RE); // don't change the word length etc, and 'or' in the pattern not overwrite |USART_CR1_M_8N1);
regs->CR1 |= (USART_CR1_TE | USART_CR1_RE); // Preserve word length, etc. Use 'or' to preserve USART_CR1_M_8N1
regs->CR1 |= USART_CR1_UE;
}
}
@ -137,5 +137,5 @@ int WifiSerial::wifi_rb_is_full() {
return rb_is_full(this->usart_device->rb);
}
#endif // MKS_WIFI_MODULE
#endif // HAS_TFT_LVGL_UI
#endif // HAS_TFT_LVGL_UI && MKS_WIFI_MODULE
#endif // __STM32F1__

77
Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32F1.h Normal file
View file

@ -0,0 +1,77 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <libmaple/libmaple_types.h>
#include <libmaple/usart.h>
#include <libmaple/libmaple.h>
#include <libmaple/gpio.h>
#include <libmaple/timer.h>
#include <libmaple/ring_buffer.h>
#define DEFINE_WFSERIAL(name, n) WifiSerial name(USART##n, BOARD_USART##n##_TX_PIN, BOARD_USART##n##_RX_PIN)
class WifiSerial {
public:
uint8 wifiRxBuf[WIFI_RX_BUF_SIZE];
public:
WifiSerial(struct usart_dev *usart_device, uint8 tx_pin, uint8 rx_pin);
/* Set up/tear down */
void begin(uint32 baud);
void begin(uint32 baud,uint8_t config);
void end();
int available();
int read();
int write(uint8_t);
inline void wifi_usart_irq(usart_reg_map *regs) {
/* Handling RXNEIE and TXEIE interrupts.
* RXNE signifies availability of a byte in DR.
*
* See table 198 (sec 27.4, p809) in STM document RM0008 rev 15.
* We enable RXNEIE.
*/
if ((regs->CR1 & USART_CR1_RXNEIE) && (regs->SR & USART_SR_RXNE)) {
#ifdef USART_SAFE_INSERT
/* If the buffer is full and the user defines USART_SAFE_INSERT,
* ignore new bytes. */
rb_safe_insert(this->usart_device->rb, (uint8)regs->DR);
#else
/* By default, push bytes around in the ring buffer. */
rb_push_insert(this->usart_device->rb, (uint8)regs->DR);
#endif
}
/* TXE signifies readiness to send a byte to DR. */
if ((regs->CR1 & USART_CR1_TXEIE) && (regs->SR & USART_SR_TXE)) {
if (!rb_is_empty(this->usart_device->wb))
regs->DR=rb_remove(this->usart_device->wb);
else
regs->CR1 &= ~((uint32)USART_CR1_TXEIE); // disable TXEIE
}
}
int wifi_rb_is_full();
struct usart_dev *usart_device;
private:
uint8 tx_pin;
uint8 rx_pin;
};

704
Marlin/src/lcd/extui/mks_ui/wifi_module.cpp
View file

File diff suppressed because it is too large Load diff

4
Marlin/src/lcd/extui/mks_ui/wifi_module.h
View file

@ -64,6 +64,7 @@ typedef enum{
#define TRANS_RCV_FIFO_BLOCK_NUM 14
typedef struct {
bool receiveEspData;
unsigned char *bufferAddr[TRANS_RCV_FIFO_BLOCK_NUM];
unsigned char *p;
UDISK_DATA_BUFFER_STATE state[TRANS_RCV_FIFO_BLOCK_NUM];
@ -191,6 +192,9 @@ void get_wifi_list_command_send();
void get_wifi_commands();
int readWifiBuf(int8_t *buf, int32_t len);
void mks_wifi_firmware_update();
int usartFifoAvailable(SZ_USART_FIFO *fifo);
int readUsartFifo(SZ_USART_FIFO *fifo, int8_t *buf, int32_t len);
void esp_port_begin(uint8_t interrupt);
#ifdef __cplusplus
} /* C-declarations for C++ */

10
Marlin/src/lcd/extui/mks_ui/wifi_upload.cpp
View file

@ -40,7 +40,6 @@ extern SZ_USART_FIFO WifiRxFifo;
extern int readUsartFifo(SZ_USART_FIFO *fifo, int8_t *buf, int32_t len);
extern int writeUsartFifo(SZ_USART_FIFO * fifo, int8_t * buf, int32_t len);
void esp_port_begin(uint8_t interrupt);
extern int usartFifoAvailable(SZ_USART_FIFO *fifo);
void wifi_delay(int n);
#define ARRAY_SIZE(a) sizeof(a) / sizeof((a)[0])
@ -280,7 +279,7 @@ EspUploadResult readPacket(uint8_t op, uint32_t *valp, size_t *bodyLen, uint32_t
switch (state) {
case begin: // expecting frame start
c = uploadPort_read();
if (c == (uint8_t)0xC0) break;
if (c != (uint8_t)0xC0) break;
state = header;
needBytes = 2;
break;
@ -644,10 +643,7 @@ static const uint32_t FirmwareAddress = 0x00000000, WebFilesAddress = 0x00100000
void ResetWiFiForUpload(int begin_or_end) {
//#if 0
uint32_t start, now;
start = getWifiTick();
now = start;
uint32_t start = getWifiTick();
if (begin_or_end == 0) {
SET_OUTPUT(WIFI_IO0_PIN);
@ -657,7 +653,7 @@ void ResetWiFiForUpload(int begin_or_end) {
SET_INPUT_PULLUP(WIFI_IO0_PIN);
WIFI_RESET();
while (getWifiTickDiff(start, now) < 500) now = getWifiTick();
while (getWifiTickDiff(start, getWifiTick()) < 500) { /* nada */ }
WIFI_SET();
//#endif
}

1
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
View file

@ -36,6 +36,7 @@
#define BOARD_INFO_NAME "MKS Robin E3P"
#define BOARD_NO_NATIVE_USB
#define MKS_HARDWARE_TEST_ONLY_E0
//
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role

15
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h
View file

@ -178,16 +178,16 @@
//
// Misc. Functions
//
#define MT_DET_1 PA4
#define MT_DET_2 PE6
#define MT_DET_1_PIN PA4
#define MT_DET_2_PIN PE6
#define PW_DET PA13
#define PW_OFF PB2
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN MT_DET_1
#define FIL_RUNOUT_PIN MT_DET_1_PIN
#endif
#ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN MT_DET_2
#define FIL_RUNOUT2_PIN MT_DET_2_PIN
#endif
#ifndef POWER_LOSS_PIN
@ -214,6 +214,13 @@
#define SDCARD_CONNECTION ONBOARD
#endif
// MKS WIFI MODULE
#if ENABLED(MKS_WIFI_MODULE)
#define WIFI_IO0_PIN PC13 // MKS ESP WIFI IO0 PIN
#define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN
#define WIFI_RESET_PIN PE9 // MKS ESP WIFI RESET PIN
#endif
//
// Onboard SD card
//

4
buildroot/tests/mks_robin_nano35
View file

@ -21,8 +21,8 @@ exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
use_example_configs Mks/Robin
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
opt_disable TFT_INTERFACE_FSMC
opt_enable TFT_INTERFACE_SPI
exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3"
opt_enable TFT_INTERFACE_SPI MKS_WIFI_MODULE
exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI, MKS_WIFI_MODULE" "$3"
#
# MKS Robin nano v1.2 LVGL FSMC

3
ini/stm32f1-maple.ini
View file

@ -26,8 +26,7 @@
platform = ststm32@~12.1
board_build.core = maple
build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py
${common.build_flags}
-DARDUINO_ARCH_STM32
${common.build_flags} -DARDUINO_ARCH_STM32 -DMAPLE_STM32F1
build_unflags = -std=gnu11 -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/STM32F1>
lib_ignore = SPI, FreeRTOS701, FreeRTOS821