ZoneStar Z6FB (#18918)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

Marlin/Configuration.h

@@ -2089,7 +2089,7 @@
 //#define OLED_PANEL_TINYBOY2
 
 //
-// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
+// MKS OLED 1.3" 128×64 FULL GRAPHICS CONTROLLER
 // https://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
@@ -2097,6 +2097,13 @@
 //#define MKS_12864OLED          // Uses the SH1106 controller (default)
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
 
+//
+// Zonestar OLED 128×64 FULL GRAPHICS CONTROLLER
+//
+//#define ZONESTAR_12864LCD           // Graphical (DOGM) with ST7920 controller
+//#define ZONESTAR_12864OLED          // 1.3" OLED with SH1106 controller (default)
+//#define ZONESTAR_12864OLED_SSD1306  // 0.96" OLED with SSD1306 controller
+
 //
 // Einstart S OLED SSD1306
 //
@@ -2108,7 +2115,7 @@
 //#define OVERLORD_OLED
 
 //
-// FYSETC OLED 2.42" 128 × 64 FULL GRAPHICS CONTROLLER with WS2812 RGB
+// FYSETC OLED 2.42" 128×64 FULL GRAPHICS CONTROLLER with WS2812 RGB
 // Where to find : https://www.aliexpress.com/item/4000345255731.html
 //#define FYSETC_242_OLED_12864   // Uses the SSD1309 controller
 

Marlin/src/core/boards.h

@@ -171,6 +171,7 @@
 #define BOARD_STB_11                  1508  // STB V1.1
 #define BOARD_AZTEEG_X1               1509  // Azteeg X1
 #define BOARD_ANET_10                 1510  // Anet 1.0 (Melzi clone)
+#define BOARD_ZMIB_V2                 1511  // ZoneStar ZMIB V2
 
 //
 // Other ATmega644P, ATmega644, ATmega1284P

Marlin/src/inc/Conditionals_LCD.h

@@ -62,6 +62,19 @@
   #define ENCODER_STEPS_PER_MENU_ITEM 1
   #define ENCODER_FEEDRATE_DEADZONE 2
 
+#elif ENABLED(ZONESTAR_12864LCD)
+  #define DOGLCD
+  #define IS_RRD_SC
+  #define U8GLIB_ST7920
+
+#elif ENABLED(ZONESTAR_12864OLED)
+  #define IS_RRD_SC
+  #define U8GLIB_SH1106
+
+#elif ENABLED(ZONESTAR_12864OLED_SSD1306)
+  #define IS_RRD_SC
+  #define IS_U8GLIB_SSD1306
+
 #elif ENABLED(RADDS_DISPLAY)
   #define IS_ULTIPANEL
   #define ENCODER_PULSES_PER_STEP 2

Marlin/src/inc/Conditionals_post.h

@@ -312,6 +312,10 @@
   #define _LCD_CONTRAST_INIT  17
 #elif ENABLED(MINIPANEL)
   #define _LCD_CONTRAST_INIT  150
+#elif ENABLED(ZONESTAR_12864OLED)
+  #define _LCD_CONTRAST_MIN   64
+  #define _LCD_CONTRAST_INIT 128
+  #define _LCD_CONTRAST_MAX  255
 #endif
 
 #ifdef _LCD_CONTRAST_INIT

Marlin/src/inc/SanityCheck.h

@@ -2227,6 +2227,9 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   + ENABLED(OLED_PANEL_TINYBOY2) \
   + ENABLED(MKS_12864OLED) \
   + ENABLED(MKS_12864OLED_SSD1306) \
+  + ENABLED(ZONESTAR_12864LCD) \
+  + ENABLED(ZONESTAR_12864OLED) \
+  + ENABLED(ZONESTAR_12864OLED_SSD1306) \
   + ENABLED(U8GLIB_SH1106_EINSTART) \
   + ENABLED(OVERLORD_OLED) \
   + ENABLED(FYSETC_242_OLED_12864) \
@@ -2242,7 +2245,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   + ENABLED(TFT_LVGL_UI_SPI) \
   + ENABLED(ANYCUBIC_LCD_I3MEGA) \
   + ENABLED(ANYCUBIC_LCD_CHIRON)
-  #error "Please select no more than one LCD controller option."
+  #error "Please select only one LCD controller option."
 #endif
 
 #undef IS_RRD_SC

Marlin/src/lcd/dogm/ultralcd_DOGM.cpp

@@ -246,7 +246,7 @@ void MarlinUI::init_lcd() {
       OUT_WRITE(LCD_BACKLIGHT_PIN, DISABLED(DELAYED_BACKLIGHT_INIT)); // Illuminate after reset or right away
     #endif
 
-    #if ANY(MKS_12864OLED, MKS_12864OLED_SSD1306, FYSETC_242_OLED_12864)
+    #if ANY(MKS_12864OLED, MKS_12864OLED_SSD1306, FYSETC_242_OLED_12864, ZONESTAR_12864OLED)
       SET_OUTPUT(LCD_PINS_DC);
       #ifndef LCD_RESET_PIN
         #define LCD_RESET_PIN LCD_PINS_RS

Marlin/src/lcd/dogm/ultralcd_DOGM.h

@@ -33,6 +33,9 @@
 //#define ALTERNATIVE_LCD
 
 #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+  // RepRapWorld Graphical LCD
+
   #define U8G_CLASS U8GLIB_ST7920_128X64_4X
   #if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN) && (LCD_PINS_ENABLE == MOSI_PIN)
     #define U8G_PARAM LCD_PINS_RS
@@ -43,6 +46,7 @@
 #elif ENABLED(U8GLIB_ST7920)
 
   // RepRap Discount Full Graphics Smart Controller
+  // and other variant LCDs using ST7920
 
   #if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN) && (LCD_PINS_ENABLE == MOSI_PIN)
     #define U8G_CLASS U8GLIB_ST7920_128X64_4X_HAL               // 2 stripes, HW SPI (Shared with SD card. Non-standard LCD adapter on AVR.)
@@ -88,43 +92,28 @@
     #define FORCE_SOFT_SPI                                      // SW-SPI
   #endif
 
-#elif ENABLED(MKS_12864OLED_SSD1306)
+#elif ANY(FYSETC_MINI_12864, MKS_MINI_12864, ENDER2_STOCKDISPLAY)
+
+  // The FYSETC Mini 12864 display                              // "4 stripes"
+
+  // The MKS_MINI_12864 V1/V2 aren't exact copies of the MiniPanel.
+  // Panel management is in u8g_dev_uc1701_mini12864_HAL.cpp with
+  // extra delays added to remove glitches seen with fast MCUs.
+
+  #define U8G_CLASS U8GLIB_MINI12864_2X_HAL                     // 8 stripes (HW-SPI)
+
+#elif ENABLED(MINIPANEL)
+
+  #if ENABLED(ALTERNATIVE_LCD)
+    #define U8G_CLASS U8GLIB_MINI12864
+  #else
+    #define U8G_CLASS U8GLIB_MINI12864_2X                       // 8 stripes (HW-SPI)
+  #endif
+
+#elif EITHER(MKS_12864OLED_SSD1306, FYSETC_242_OLED_12864)
 
   // MKS 128x64 (SSD1306) OLED I2C LCD
-
+  // - or -
-  #define FORCE_SOFT_SPI                                        // SW-SPI
-
-  #if ENABLED(ALTERNATIVE_LCD)
-    #define U8G_CLASS U8GLIB_SSD1306_128X64_2X                  // 4 stripes
-  #else
-    #define U8G_CLASS U8GLIB_SSD1306_128X64                     // 8 stripes
-  #endif
-
-#elif ENABLED(U8GLIB_SSD1306)
-
-  // Generic SSD1306 OLED I2C LCD
-
-  #if ENABLED(ALTERNATIVE_LCD)
-    #define U8G_CLASS U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE       // 4 stripes
-  #else
-    #define U8G_CLASS U8GLIB_SSD1306_128X64_2X                  // 4 stripes
-  #endif
-  #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST)
-
-#elif ENABLED(MKS_12864OLED)
-
-  // MKS 128x64 (SH1106) OLED I2C LCD
-
-  #define FORCE_SOFT_SPI                                        // SW-SPI
-
-  #if ENABLED(ALTERNATIVE_LCD)
-    #define U8G_CLASS U8GLIB_SH1106_128X64_2X                   // 4 stripes
-  #else
-    #define U8G_CLASS U8GLIB_SH1106_128X64                      // 8 stripes
-  #endif
-
-#elif ENABLED(FYSETC_242_OLED_12864)
-
   // FYSETC OLED 2.42" 128 × 64 FULL GRAPHICS CONTROLLER
 
   #define FORCE_SOFT_SPI                                        // SW-SPI
@@ -135,6 +124,37 @@
     #define U8G_CLASS U8GLIB_SSD1306_128X64                     // 8 stripes
   #endif
 
+#elif ENABLED(ZONESTAR_12864OLED_SSD1306)
+
+  // Zonestar SSD1306 OLED SPI LCD
+
+  #define FORCE_SOFT_SPI                                        // SW-SPI
+  #if ENABLED(ALTERNATIVE_LCD)
+    #define U8G_CLASS U8GLIB_SH1306_128X64_2X                   // 4 stripes
+  #else
+    #define U8G_CLASS U8GLIB_SH1306_128X64                      // 8 stripes
+  #endif
+
+#elif EITHER(MKS_12864OLED, ZONESTAR_12864OLED)
+
+  // MKS 128x64 (SH1106) OLED I2C LCD
+  // - or -
+  // Zonestar SH1106 OLED SPI LCD
+
+  #define FORCE_SOFT_SPI                                        // SW-SPI
+  #if ENABLED(ALTERNATIVE_LCD)
+    #define U8G_CLASS U8GLIB_SH1106_128X64_2X                   // 4 stripes
+  #else
+    #define U8G_CLASS U8GLIB_SH1106_128X64                      // 8 stripes
+  #endif
+
+#elif ENABLED(U8GLIB_SH1106_EINSTART)
+
+  // Connected via motherboard header
+
+  #define U8G_CLASS U8GLIB_SH1106_128X64
+  #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS
+
 #elif ENABLED(U8GLIB_SH1106)
 
   // Generic SH1106 OLED I2C LCD
@@ -153,34 +173,16 @@
   #define U8G_CLASS U8GLIB_SSD1309_128X64
   #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST)       // I2C
 
-#elif ENABLED(FYSETC_MINI_12864)
+#elif ENABLED(U8GLIB_SSD1306)
 
-  // The FYSETC Mini 12864 display
+  // Generic SSD1306 OLED I2C LCD
-
-  #define U8G_CLASS U8GLIB_MINI12864_2X_HAL                     // 4 stripes
-
-#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
-
-  // The MKS_MINI_12864 V1/V2 aren't exact copies of the MiniPanel.
-  // Panel management is in u8g_dev_uc1701_mini12864_HAL.cpp with
-  // extra delays added to remove glitches seen with fast MCUs.
-
-  #define U8G_CLASS U8GLIB_MINI12864_2X_HAL                     // 8 stripes (HW-SPI)
-
-#elif ENABLED(MINIPANEL)
 
   #if ENABLED(ALTERNATIVE_LCD)
-    #define U8G_CLASS U8GLIB_MINI12864
+    #define U8G_CLASS U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE       // 4 stripes
   #else
-    #define U8G_CLASS U8GLIB_MINI12864_2X                       // 8 stripes (HW-SPI)
+    #define U8G_CLASS U8GLIB_SSD1306_128X64_2X                  // 4 stripes
   #endif
-
+  #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST)
-#elif ENABLED(U8GLIB_SH1106_EINSTART)
-
-  // Connected via motherboard header
-
-  #define U8G_CLASS U8GLIB_SH1106_128X64
-  #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS
 
 #elif TFT_SCALED_DOGLCD
 

Marlin/src/lcd/extui_anycubic_chiron_lcd.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -145,7 +145,7 @@ namespace ExtUI {
     if (rx[0] != 'A') {
       SERIAL_ECHOPGM("Unexpected RX: ");
       SERIAL_ECHOLN(rx);
-    
+
       return;
     }
 
@@ -490,7 +490,7 @@ namespace ExtUI {
   void onMediaRemoved() {
     SENDLINE_PGM("J01"); // SD Removed
   }
-  
+
   void onPlayTone(const uint16_t frequency, const uint16_t duration) {
     tone(BEEPER_PIN, frequency, duration);
   }

Marlin/src/pins/pins.h

@@ -300,6 +300,8 @@
   #include "sanguino/pins_STB_11.h"             // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
 #elif MB(AZTEEG_X1)
   #include "sanguino/pins_AZTEEG_X1.h"          // ATmega644P, ATmega1284P                env:sanguino644p env:sanguino1284p
+#elif MB(ZMIB_V2)
+  #include "sanguino/pins_ZMIB_V2.h"            // ATmega644P, ATmega1284P                env:sanguino_atmega644p env:sanguino_atmega1284p
 
 //
 // Other ATmega644P, ATmega644, ATmega1284P

Marlin/src/pins/sanguino/pins_ZMIB_V2.h

@@ -0,0 +1,234 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
+  #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'"
+#endif
+
+#define BOARD_INFO_NAME   "Zonestar ZMIB_V2"
+#define BOARD_WEBSITE_URL "https://www.aliexpress.com/item/32957490744.html"
+
+#define IS_ZMIB_V2
+
+/**
+ * ZMIB pin assignments
+ *
+ * The ZMIB board needs a bootloader installed before Marlin can be uploaded.
+ * If you don't have a chip programmer you can use a spare Arduino plus a few
+ * electronic components to write the bootloader.
+ *
+ * See http://www.instructables.com/id/Burn-Arduino-Bootloader-with-Arduino-MEGA/
+ */
+
+/**
+ * PIN:   0   Port: B0   HEATER_0_PIN
+ * PIN:   1   Port: B1   HEATER_BED_PIN
+ * PIN:   2   Port: B2   EXP1_4(BTN_EN2)
+ * PIN:   3   Port: B3   V1: SD_DETECT_PIN
+ * PIN:   3   Port: B3   V2: EXP1_6
+ * PIN:   4   Port: B4   SDSS
+ * PIN:   4   Port: B4   V1: EXP1_6
+ * PIN:   5   Port: B5   AVR_MOSI_PIN
+ * .                     MOSI_PIN
+ * PIN:   6   Port: B6   AVR_MISO_PIN
+ * .                     EXP1_9(MISO_PIN)
+ * PIN:   7   Port: B7   AVR_SCK_PIN
+ * .                     EXP1_10(SCK_PIN)
+ * PIN:   8   Port: D0   RXD
+ * PIN:   9   Port: D1   TXD
+ * PIN:  10   Port: D2   EXP1_8
+ * PIN:  11   Port: D3   EXP1_7
+ * PIN:  12   Port: D4   EXP1_5(BTN_EN1)
+ * PIN:  13   Port: D5   Z_MIN_PIN
+ * PIN:  14   Port: D6   E1_DIR_PIN
+ * PIN:  15   Port: D7   E1_STEP_PIN
+ * PIN:  16   Port: C0   Z_DIR_PIN
+ * PIN:  17   Port: C1   Z_STEP_PIN
+ * PIN:  18   Port: C2   Y_MIN_PIN
+ * PIN:  19   Port: C3   Y_DIR_PIN
+ * PIN:  20   Port: C4   Y_STEP_PIN
+ * PIN:  21   Port: C5   X_MIN_PIN
+ * PIN:  22   Port: C6   X_DIR_PIN
+ * PIN:  23   Port: C7   X_STEP_PIN
+ * PIN:  24   Port: A7   X_ENABLE_PIN
+ *                       Y_ENABLE_PIN
+ *                       Z_ENABLE_PIN
+ *                       E0_ENABLE_PIN
+ *                       E1_ENABLE_PIN
+ * PIN:  25   Port: A6   FIL_RUNOUT_PIN
+ * PIN:  26   Port: A5   E0_DIR_PIN
+ * PIN:  27   Port: A4   E0_STEP_PIN
+ * PIN:  28   Port: A3   FAN_PIN
+ * PIN:  29   Port: A2   EXP1_3(BTN_ENC)
+ *                       ADC_KEY_PIN
+ * PIN:  30   Port: A1   TEMP_0_PIN
+ * PIN:  31   Port: A0   TEMP_BED_PIN
+ */
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN                             21
+#define Y_MIN_PIN                             18
+
+#if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT)
+  #define Z_MIN_PIN                           25
+#else
+  #define Z_MIN_PIN                           13
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            23
+#define X_DIR_PIN                             22
+#define X_ENABLE_PIN                          24
+
+#define Y_STEP_PIN                            20
+#define Y_DIR_PIN                             19
+#define Y_ENABLE_PIN                          24
+
+#if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT)
+  #define Z_STEP_PIN                          27
+  #define Z_DIR_PIN                           26
+#else
+  #define Z_STEP_PIN                          17
+  #define Z_DIR_PIN                           16
+#endif
+
+#define Z_ENABLE_PIN                          24
+
+#if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT)
+  #define E0_STEP_PIN                         15
+  #define E0_DIR_PIN                          14
+#else
+  #define E0_STEP_PIN                         27
+  #define E0_DIR_PIN                          26
+#endif
+
+#define E0_ENABLE_PIN                         24
+
+#define E1_STEP_PIN                           15
+#define E1_DIR_PIN                            14
+#define E1_ENABLE_PIN                         24
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN                             1  // Analog Input
+#define TEMP_BED_PIN                           0  // Analog Input
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN                           0
+#define HEATER_BED_PIN                         1
+#define FAN_PIN                               28
+#define FAN1_PIN                              -1
+
+//
+//filament run out sensor
+//
+#if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT)
+  #define FIL_RUNOUT_PIN                      13
+#else
+  #define FIL_RUNOUT_PIN                      25  // Z-MIN
+#endif
+
+//
+// SD card
+//
+#if ENABLED(SDSUPPORT)
+  #define SDSS                                 4
+#endif
+#define SD_DETECT_PIN                         -1
+
+/*===================================================
+ * ZMIB Version 1 - EXP1 Connector
+ *   MOSI(D5)  TX1(D11)  ENA(D12)  ENC(D29/A2) 5V
+ *   SCK(D7)   RX1(D10)  SCS(D4)   ENB(D2)     GND
+ *===================================================
+ * ZMIB Version 2 - EXP1 Connector
+ *   MOSI(D5)  TX1(D11)  ENA(D12)  ENC(D29/A2) 5V
+ *   SCK(D7)   RX1(D10)  SCS(D3)   ENB(D2)     GND
+ *===================================================
+ * LCD 128x64
+ *==================================================*/
+
+#if ENABLED(ZONESTAR_12864LCD)
+  //
+  // LCD 128x64
+  //
+  #define LCDSCREEN_NAME  "ZONESTAR_12864LCD"
+  #define FORCE_SOFT_SPI
+  //#define LCD_SDSS                          11
+  #define LCD_PINS_RS                         11  // ST7920_CS_PIN    LCD_PIN_RS    (PIN4 of LCD module)
+  #ifdef IS_ZMIB_V2
+    #define LCD_PINS_ENABLE                    3  // ST7920_DAT_PIN LCD_PIN_R/W   (PIN5 of LCD module)
+  #else
+    #define LCD_PINS_ENABLE                    4  // ST7920_DAT_PIN LCD_PIN_R/W   (PIN5 of LCD module)
+  #endif
+  #define LCD_PINS_D4                         10  // ST7920_CLK_PIN LCD_PIN_ENABLE (PIN6 of LCD module)
+
+  // Alter timing for graphical display
+  #define ST7920_DELAY_1             DELAY_2_NOP
+  #define ST7920_DELAY_2             DELAY_2_NOP
+  #define ST7920_DELAY_3             DELAY_2_NOP
+
+#elif EITHER(ZONESTAR_12864OLED, ZONESTAR_12864OLED_SSD1306)
+  //
+  // OLED 128x64
+  //
+  #define LCDSCREEN_NAME "ZONESTAR 12864OLED"
+  #define FORCE_SOFT_SPI
+  #ifdef IS_ZMIB_V2
+    #define LCD_PINS_RS                        3  // RESET
+  #else
+    #define LCD_PINS_RS                        4  // RESET
+  #endif
+  #define LCD_PINS_DC                         10  // DC
+  #define DOGLCD_CS                           11  // CS
+  #if ENABLED(OLED_HW_IIC)
+    #error "Oops! can't choose HW IIC for ZMIB board!!"
+  #elif ENABLED(OLED_HW_SPI)
+    // HW SPI
+    #define DOGLCD_A0                LCD_PINS_DC  // A0 = DC
+  #else
+    // SW SPI
+    #define DOGLCD_A0                LCD_PINS_DC  // A0 = DC
+    #define DOGLCD_MOSI             AVR_MOSI_PIN  // SDA
+    #define DOGLCD_SCK               AVR_SCK_PIN  // SCK
+  #endif
+
+#endif
+
+//
+// All the above are also RRDSC with rotary encoder
+//
+#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+  #define BTN_EN1                              2
+  #define BTN_EN2                             12
+  #define BTN_ENC                             29
+  #define BEEPER_PIN                          -1
+  #define KILL_PIN                            -1
+#endif

Marlin/src/sd/Sd2Card.cpp

@@ -240,8 +240,15 @@ bool Sd2Card::init(const uint8_t sckRateID, const pin_t chipSelectPin) {
   watchdog_refresh(); // In case init takes too long
 
   // Set pin modes
-  extDigitalWrite(chipSelectPin_, HIGH);  // For some CPUs pinMode can write the wrong data so init desired data value first
+  #if ENABLED(ZONESTAR_12864OLED)
-  pinMode(chipSelectPin_, OUTPUT);        // Solution for #8746 by @benlye
+    if (chipSelectPin_ != DOGLCD_CS) {
+      SET_OUTPUT(DOGLCD_CS);
+      WRITE(DOGLCD_CS, HIGH);
+    }
+  #else
+    extDigitalWrite(chipSelectPin_, HIGH);  // For some CPUs pinMode can write the wrong data so init desired data value first
+    pinMode(chipSelectPin_, OUTPUT);        // Solution for #8746 by @benlye
+  #endif
   spiBegin();
 
   // Set SCK rate for initialization commands

platformio.ini

@@ -869,7 +869,6 @@ board           = genericSTM32F103VE
 platform_packages = tool-stm32duino
 extra_scripts   = ${common.extra_scripts}
   buildroot/share/PlatformIO/scripts/mks_robin_nano35.py
-lib_deps        = ${common_stm32f1.lib_deps}
 build_flags     = ${common_stm32f1.build_flags}
   -DMCU_STM32F103VE -DSS_TIMER=4
 debug_tool      = jlink