From cb9dc56630f4c6d2913867fedf094e668e8153e4 Mon Sep 17 00:00:00 2001 From: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Thu, 27 Sep 2018 15:13:15 -0400 Subject: [PATCH] Add GT2560 v3 support (#11914) --- Marlin/src/core/boards.h | 1 + Marlin/src/pins/pins.h | 2 + Marlin/src/pins/pins_FORMBOT_TREX2PLUS.h | 1 + Marlin/src/pins/pins_GT2560_V3.h | 124 +++++++++++++++++++++++ 4 files changed, 128 insertions(+) create mode 100644 Marlin/src/pins/pins_GT2560_V3.h diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 9b45f0669d..d8872f0eb0 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -83,6 +83,7 @@ #define BOARD_TRIGORILLA_13 343 // TriGorilla Anycubic version 1.3 based on RAMPS EFB #define BOARD_TRIGORILLA_14 443 // TriGorilla Anycubic version 1.4 based on RAMPS EFB #define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8 +#define BOARD_GT2560_V3 76 // Geeetech A10 // // Other ATmega1280, ATmega2560 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 26d828ef53..019ed61066 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -150,6 +150,8 @@ #include "pins_TRIGORILLA_14.h" // ATmega2560 env:megaatmega2560 #elif MB(RAMPS_ENDER_4) #include "pins_RAMPS_ENDER_4.h" // ATmega2560 env:megaatmega2560 +#elif MB(GT2560_V3) + #include "pins_GT2560_V3.h" // ATmega2560 env:megaatmega2560 // // Other ATmega1280, ATmega2560 diff --git a/Marlin/src/pins/pins_FORMBOT_TREX2PLUS.h b/Marlin/src/pins/pins_FORMBOT_TREX2PLUS.h index 5aa826b290..e02ee5e1f3 100644 --- a/Marlin/src/pins/pins_FORMBOT_TREX2PLUS.h +++ b/Marlin/src/pins/pins_FORMBOT_TREX2PLUS.h @@ -143,6 +143,7 @@ #define HEATER_BED_PIN 58 #define FAN_PIN 9 + #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_PIN 4 //#define FIL_RUNOUT2_PIN -1 diff --git a/Marlin/src/pins/pins_GT2560_V3.h b/Marlin/src/pins/pins_GT2560_V3.h new file mode 100644 index 0000000000..414780a273 --- /dev/null +++ b/Marlin/src/pins/pins_GT2560_V3.h @@ -0,0 +1,124 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + + +/** + * GT2560 V3.0 pin assignment + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "GT2560 V3.0" +#endif + +// +// Limit Switches +// +#define X_MIN_PIN 24 +#define X_MAX_PIN 22 +#define Y_MIN_PIN 28 +#define Y_MAX_PIN 26 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 32 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 39 +#define X_ENABLE_PIN 35 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 25 +#define Z_DIR_PIN 23 +#define Z_ENABLE_PIN 27 + +#define E0_STEP_PIN 46 +#define E0_DIR_PIN 44 +#define E0_ENABLE_PIN 12 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 11 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_2_PIN 1 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 3 +#define HEATER_2_PIN 1 +#define HEATER_BED_PIN 4 +#define FAN_PIN 9 + +// +// Misc. Functions +// +#define SD_DETECT_PIN 38 +#define SDSS 53 +#define LED_PIN 6 +#define PS_ON_PIN 12 +#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing. +#define SERVO0_PIN 11 //13 untested 3Dtouch + +#ifndef CASE_LIGHT_PIN + //#define CASE_LIGHT_PIN 21 + #define CASE_LIGHT_PIN 6 +#endif + +// +// LCD Controller +// +#define BEEPER_PIN 18 + +#define LCD_PINS_RS 20 +#define LCD_PINS_ENABLE 17 +#define LCD_PINS_D4 16 +#define LCD_PINS_D5 21 +#define LCD_PINS_D6 5 +#define LCD_PINS_D7 36 + +#if ENABLED(NEWPANEL) + #define BTN_EN1 42 + #define BTN_EN2 40 + #define BTN_ENC 19 +#endif