Implement DUAL_NOZZLE_DUPLICATION_MODE

This commit is contained in:
Scott Lahteine 2016-07-20 10:30:10 -07:00
parent 91777dd76c
commit cbc7f22ad9
4 changed files with 29 additions and 11 deletions

View file

@ -134,7 +134,7 @@ void idle(
void manage_inactivity(bool ignore_stepper_queue = false); void manage_inactivity(bool ignore_stepper_queue = false);
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
extern bool extruder_duplication_enabled; extern bool extruder_duplication_enabled;
#endif #endif

View file

@ -1392,6 +1392,10 @@ XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH);
XYZ_CONSTS_FROM_CONFIG(float, home_bump_mm, HOME_BUMP_MM); XYZ_CONSTS_FROM_CONFIG(float, home_bump_mm, HOME_BUMP_MM);
XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR); XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
bool extruder_duplication_enabled = false; // Used in Dual X mode 2
#endif
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
#define DXC_FULL_CONTROL_MODE 0 #define DXC_FULL_CONTROL_MODE 0
@ -1423,7 +1427,6 @@ XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
static millis_t delayed_move_time = 0; // used in mode 1 static millis_t delayed_move_time = 0; // used in mode 1
static float duplicate_extruder_x_offset = DEFAULT_DUPLICATION_X_OFFSET; // used in mode 2 static float duplicate_extruder_x_offset = DEFAULT_DUPLICATION_X_OFFSET; // used in mode 2
static float duplicate_extruder_temp_offset = 0; // used in mode 2 static float duplicate_extruder_temp_offset = 0; // used in mode 2
bool extruder_duplication_enabled = false; // used in mode 2
#endif //DUAL_X_CARRIAGE #endif //DUAL_X_CARRIAGE
@ -2820,12 +2823,13 @@ inline void gcode_G4() {
current_position[X_AXIS] = current_position[Y_AXIS] = 0.0; current_position[X_AXIS] = current_position[Y_AXIS] = 0.0;
sync_plan_position(); sync_plan_position();
int x_axis_home_dir =
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
int x_axis_home_dir = x_home_dir(active_extruder); x_home_dir(active_extruder)
extruder_duplication_enabled = false;
#else #else
int x_axis_home_dir = home_dir(X_AXIS); home_dir(X_AXIS)
#endif #endif
;
float mlx = max_length(X_AXIS), float mlx = max_length(X_AXIS),
mly = max_length(Y_AXIS), mly = max_length(Y_AXIS),
@ -2878,6 +2882,10 @@ inline void gcode_G28() {
tool_change(0, 0, true); tool_change(0, 0, true);
#endif #endif
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
extruder_duplication_enabled = false;
#endif
/** /**
* For mesh bed leveling deactivate the mesh calculations, will be turned * For mesh bed leveling deactivate the mesh calculations, will be turned
* on again when homing all axis * on again when homing all axis
@ -2996,7 +3004,6 @@ inline void gcode_G28() {
if (home_all_axis || homeX) { if (home_all_axis || homeX) {
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
int tmp_extruder = active_extruder; int tmp_extruder = active_extruder;
extruder_duplication_enabled = false;
active_extruder = !active_extruder; active_extruder = !active_extruder;
HOMEAXIS(X); HOMEAXIS(X);
inactive_extruder_x_pos = current_position[X_AXIS]; inactive_extruder_x_pos = current_position[X_AXIS];
@ -6473,7 +6480,17 @@ inline void gcode_M503() {
delayed_move_time = 0; delayed_move_time = 0;
} }
#endif // DUAL_X_CARRIAGE #elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
inline void gcode_M605() {
stepper.synchronize();
extruder_duplication_enabled = code_seen('S') && code_value_int() == 2;
SERIAL_ECHO_START;
SERIAL_ECHOPAIR(MSG_DUPLICATION_MODE, extruder_duplication_enabled ? MSG_ON : MSG_OFF);
SERIAL_EOL;
}
#endif // M605
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
/** /**

View file

@ -159,6 +159,7 @@
#define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_ENDSTOP_OPEN "open" #define MSG_ENDSTOP_OPEN "open"
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_DUPLICATION_MODE "Duplication mode: "
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir " #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir "
#define MSG_SD_INIT_FAIL "SD init fail" #define MSG_SD_INIT_FAIL "SD init fail"

View file

@ -195,7 +195,7 @@
#define NORM_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } } #define NORM_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }
#define REV_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(INVERT_E2_DIR); } } #define REV_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(INVERT_E2_DIR); } }
#elif EXTRUDERS > 1 #elif EXTRUDERS > 1
#if DISABLED(DUAL_X_CARRIAGE) #if DISABLED(DUAL_X_CARRIAGE) && DISABLED(DUAL_NOZZLE_DUPLICATION_MODE)
#define E_STEP_WRITE(v) { if (current_block->active_extruder == 0) { E0_STEP_WRITE(v); } else { E1_STEP_WRITE(v); } } #define E_STEP_WRITE(v) { if (current_block->active_extruder == 0) { E0_STEP_WRITE(v); } else { E1_STEP_WRITE(v); } }
#define NORM_E_DIR() { if (current_block->active_extruder == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } } #define NORM_E_DIR() { if (current_block->active_extruder == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }
#define REV_E_DIR() { if (current_block->active_extruder == 0) { E0_DIR_WRITE(INVERT_E0_DIR); } else { E1_DIR_WRITE(INVERT_E1_DIR); } } #define REV_E_DIR() { if (current_block->active_extruder == 0) { E0_DIR_WRITE(INVERT_E0_DIR); } else { E1_DIR_WRITE(INVERT_E1_DIR); } }