diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
index 4367e5ed46..bd7c98081e 100644
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -90,17 +90,18 @@
#define BOARD_RAMPS_ENDER_4 1134 // Creality: Ender-4, CR-8
#define BOARD_RAMPS_CREALITY 1135 // Creality: CR10S, CR20, CR-X
#define BOARD_RAMPS_DAGOMA 1136 // Dagoma F5
-#define BOARD_FYSETC_F6_13 1137 // FYSETC F6
-#define BOARD_DUPLICATOR_I3_PLUS 1138 // Wanhao Duplicator i3 Plus
-#define BOARD_VORON 1139 // VORON Design
-#define BOARD_TRONXY_V3_1_0 1140 // Tronxy TRONXY-V3-1.0
-#define BOARD_Z_BOLT_X_SERIES 1141 // Z-Bolt X Series
-#define BOARD_TT_OSCAR 1142 // TT OSCAR
-#define BOARD_OVERLORD 1143 // Overlord/Overlord Pro
-#define BOARD_HJC2560C_REV1 1144 // ADIMLab Gantry v1
-#define BOARD_HJC2560C_REV2 1145 // ADIMLab Gantry v2
-#define BOARD_TANGO 1146 // BIQU Tango V1
-#define BOARD_MKS_GEN_L_V2 1147 // MKS GEN L V2
+#define BOARD_FYSETC_F6_13 1137 // FYSETC F6 1.3
+#define BOARD_FYSETC_F6_14 1138 // FYSETC F6 1.4
+#define BOARD_DUPLICATOR_I3_PLUS 1139 // Wanhao Duplicator i3 Plus
+#define BOARD_VORON 1140 // VORON Design
+#define BOARD_TRONXY_V3_1_0 1141 // Tronxy TRONXY-V3-1.0
+#define BOARD_Z_BOLT_X_SERIES 1142 // Z-Bolt X Series
+#define BOARD_TT_OSCAR 1143 // TT OSCAR
+#define BOARD_OVERLORD 1144 // Overlord/Overlord Pro
+#define BOARD_HJC2560C_REV1 1145 // ADIMLab Gantry v1
+#define BOARD_HJC2560C_REV2 1146 // ADIMLab Gantry v2
+#define BOARD_TANGO 1147 // BIQU Tango V1
+#define BOARD_MKS_GEN_L_V2 1148 // MKS GEN L V2
//
// RAMBo and derivatives
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index 9dcbce87f6..856f6055da 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -170,6 +170,8 @@
#include "ramps/pins_RAMPS_DAGOMA.h" // ATmega2560 env:megaatmega2560
#elif MB(FYSETC_F6_13)
#include "ramps/pins_FYSETC_F6_13.h" // ATmega2560 env:FYSETC_F6_13
+#elif MB(FYSETC_F6_14)
+ #include "ramps/pins_FYSETC_F6_14.h" // ATmega2560 env:FYSETC_F6_14
#elif MB(DUPLICATOR_I3_PLUS)
#include "ramps/pins_DUPLICATOR_I3_PLUS.h" // ATmega2560 env:megaatmega2560
#elif MB(VORON)
@@ -185,7 +187,6 @@
#elif MB(MKS_GEN_L_V2)
#include "ramps/pins_MKS_GEN_L_V2.h" // ATmega2560 env:megaatmega2560
-
//
// RAMBo and derivatives
//
diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h
index 1168948d93..4c6f59aaae 100644
--- a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h
+++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h
@@ -22,7 +22,7 @@
#pragma once
//
-// FYSETC F6 pin assignments
+// FYSETC F6 1.3 (and 1.4) pin assignments
//
#ifndef __AVR_ATmega2560__
@@ -33,7 +33,9 @@
//#error "SD_DETECT_INVERTED must be disabled for the FYSETC_F6_13 board."
#endif
-#define BOARD_INFO_NAME "FYSETC F6 1.3"
+#ifndef BOARD_INFO_NAME
+ #define BOARD_INFO_NAME "FYSETC F6 1.3"
+#endif
#define RESET_PIN 30
#define SPI_FLASH_CS 83
@@ -54,7 +56,9 @@
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 12
-#define Z_MAX_PIN 9
+#ifndef Z_MAX_PIN
+ #define Z_MAX_PIN 9
+#endif
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN SERVO2_PIN
@@ -124,18 +128,42 @@
* Software serial communication pins.
* At the moment, F6 rx pins are not pc interrupt pins
*/
- #define X_SERIAL_RX_PIN -1 // 71
- #define X_SERIAL_TX_PIN 72
- #define Y_SERIAL_RX_PIN -1 // 73
- #define Y_SERIAL_TX_PIN 75
- #define Z_SERIAL_RX_PIN -1 // 78
- #define Z_SERIAL_TX_PIN 79
- #define E0_SERIAL_RX_PIN -1 // 76
- #define E0_SERIAL_TX_PIN 77
- #define E1_SERIAL_RX_PIN -1 // 80
- #define E1_SERIAL_TX_PIN 81
- #define E2_SERIAL_RX_PIN -1 // 22
- #define E2_SERIAL_TX_PIN 82
+ #ifndef X_SERIAL_RX_PIN
+ #define X_SERIAL_RX_PIN -1 // 71
+ #endif
+ #ifndef X_SERIAL_TX_PIN
+ #define X_SERIAL_TX_PIN 72
+ #endif
+ #ifndef Y_SERIAL_RX_PIN
+ #define Y_SERIAL_RX_PIN -1 // 73
+ #endif
+ #ifndef Y_SERIAL_TX_PIN
+ #define Y_SERIAL_TX_PIN 75
+ #endif
+ #ifndef Z_SERIAL_RX_PIN
+ #define Z_SERIAL_RX_PIN -1 // 78
+ #endif
+ #ifndef Z_SERIAL_TX_PIN
+ #define Z_SERIAL_TX_PIN 79
+ #endif
+ #ifndef E0_SERIAL_RX_PIN
+ #define E0_SERIAL_RX_PIN -1 // 76
+ #endif
+ #ifndef E0_SERIAL_TX_PIN
+ #define E0_SERIAL_TX_PIN 77
+ #endif
+ #ifndef E1_SERIAL_RX_PIN
+ #define E1_SERIAL_RX_PIN -1 // 80
+ #endif
+ #ifndef E1_SERIAL_TX_PIN
+ #define E1_SERIAL_TX_PIN 81
+ #endif
+ #ifndef E2_SERIAL_RX_PIN
+ #define E2_SERIAL_RX_PIN -1 // 22
+ #endif
+ #ifndef E2_SERIAL_TX_PIN
+ #define E2_SERIAL_TX_PIN 82
+ #endif
#endif
//
diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_14.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_14.h
new file mode 100644
index 0000000000..088955ff0c
--- /dev/null
+++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_14.h
@@ -0,0 +1,50 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+//
+// FYSETC F6 v1.4 pin assignments
+//
+
+#define BOARD_NAME "FYSETC F6 1.4"
+
+#define Z_MAX_PIN 2
+
+#if HAS_TMC220x
+ /**
+ * TMC2208/TMC2209 stepper drivers
+ */
+ #define X_SERIAL_RX_PIN 72
+ #define X_SERIAL_TX_PIN 71
+ #define Y_SERIAL_RX_PIN 73
+ #define Y_SERIAL_TX_PIN 78
+ #define Z_SERIAL_RX_PIN 75
+ #define Z_SERIAL_TX_PIN 79
+ #define E0_SERIAL_RX_PIN 77
+ #define E0_SERIAL_TX_PIN 81
+ #define E1_SERIAL_RX_PIN 76
+ #define E1_SERIAL_TX_PIN 80
+ #define E2_SERIAL_RX_PIN 62
+ #define E2_SERIAL_TX_PIN 82
+#endif
+
+#include "pins_FYSETC_F6_13.h"
diff --git a/platformio.ini b/platformio.ini
index ba4dc4dfc0..420c002298 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -98,6 +98,17 @@ lib_deps = ${common.lib_deps}
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +
+#
+# FYSETC F6 V1.4
+#
+[env:FYSETC_F6_14]
+platform = atmelavr
+board = fysetc_f6_14
+board_build.f_cpu = 16000000L
+lib_deps = ${common.lib_deps}
+ TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter = ${common.default_src_filter} +
+
#
# Sanguinololu (ATmega644p)
#