FYSETC F6 v1.4 board support (#16321)

This commit is contained in:
George Fu 2020-01-04 10:29:25 +08:00 committed by Scott Lahteine
parent a49c6608c9
commit ceeba58dc9
5 changed files with 118 additions and 27 deletions

View file

@ -90,17 +90,18 @@
#define BOARD_RAMPS_ENDER_4 1134 // Creality: Ender-4, CR-8
#define BOARD_RAMPS_CREALITY 1135 // Creality: CR10S, CR20, CR-X
#define BOARD_RAMPS_DAGOMA 1136 // Dagoma F5
#define BOARD_FYSETC_F6_13 1137 // FYSETC F6
#define BOARD_DUPLICATOR_I3_PLUS 1138 // Wanhao Duplicator i3 Plus
#define BOARD_VORON 1139 // VORON Design
#define BOARD_TRONXY_V3_1_0 1140 // Tronxy TRONXY-V3-1.0
#define BOARD_Z_BOLT_X_SERIES 1141 // Z-Bolt X Series
#define BOARD_TT_OSCAR 1142 // TT OSCAR
#define BOARD_OVERLORD 1143 // Overlord/Overlord Pro
#define BOARD_HJC2560C_REV1 1144 // ADIMLab Gantry v1
#define BOARD_HJC2560C_REV2 1145 // ADIMLab Gantry v2
#define BOARD_TANGO 1146 // BIQU Tango V1
#define BOARD_MKS_GEN_L_V2 1147 // MKS GEN L V2
#define BOARD_FYSETC_F6_13 1137 // FYSETC F6 1.3
#define BOARD_FYSETC_F6_14 1138 // FYSETC F6 1.4
#define BOARD_DUPLICATOR_I3_PLUS 1139 // Wanhao Duplicator i3 Plus
#define BOARD_VORON 1140 // VORON Design
#define BOARD_TRONXY_V3_1_0 1141 // Tronxy TRONXY-V3-1.0
#define BOARD_Z_BOLT_X_SERIES 1142 // Z-Bolt X Series
#define BOARD_TT_OSCAR 1143 // TT OSCAR
#define BOARD_OVERLORD 1144 // Overlord/Overlord Pro
#define BOARD_HJC2560C_REV1 1145 // ADIMLab Gantry v1
#define BOARD_HJC2560C_REV2 1146 // ADIMLab Gantry v2
#define BOARD_TANGO 1147 // BIQU Tango V1
#define BOARD_MKS_GEN_L_V2 1148 // MKS GEN L V2
//
// RAMBo and derivatives

View file

@ -170,6 +170,8 @@
#include "ramps/pins_RAMPS_DAGOMA.h" // ATmega2560 env:megaatmega2560
#elif MB(FYSETC_F6_13)
#include "ramps/pins_FYSETC_F6_13.h" // ATmega2560 env:FYSETC_F6_13
#elif MB(FYSETC_F6_14)
#include "ramps/pins_FYSETC_F6_14.h" // ATmega2560 env:FYSETC_F6_14
#elif MB(DUPLICATOR_I3_PLUS)
#include "ramps/pins_DUPLICATOR_I3_PLUS.h" // ATmega2560 env:megaatmega2560
#elif MB(VORON)
@ -185,7 +187,6 @@
#elif MB(MKS_GEN_L_V2)
#include "ramps/pins_MKS_GEN_L_V2.h" // ATmega2560 env:megaatmega2560
//
// RAMBo and derivatives
//

View file

@ -22,7 +22,7 @@
#pragma once
//
// FYSETC F6 pin assignments
// FYSETC F6 1.3 (and 1.4) pin assignments
//
#ifndef __AVR_ATmega2560__
@ -33,7 +33,9 @@
//#error "SD_DETECT_INVERTED must be disabled for the FYSETC_F6_13 board."
#endif
#define BOARD_INFO_NAME "FYSETC F6 1.3"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "FYSETC F6 1.3"
#endif
#define RESET_PIN 30
#define SPI_FLASH_CS 83
@ -54,7 +56,9 @@
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 12
#define Z_MAX_PIN 9
#ifndef Z_MAX_PIN
#define Z_MAX_PIN 9
#endif
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN SERVO2_PIN
@ -124,18 +128,42 @@
* Software serial communication pins.
* At the moment, F6 rx pins are not pc interrupt pins
*/
#ifndef X_SERIAL_RX_PIN
#define X_SERIAL_RX_PIN -1 // 71
#endif
#ifndef X_SERIAL_TX_PIN
#define X_SERIAL_TX_PIN 72
#endif
#ifndef Y_SERIAL_RX_PIN
#define Y_SERIAL_RX_PIN -1 // 73
#endif
#ifndef Y_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN 75
#endif
#ifndef Z_SERIAL_RX_PIN
#define Z_SERIAL_RX_PIN -1 // 78
#endif
#ifndef Z_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN 79
#endif
#ifndef E0_SERIAL_RX_PIN
#define E0_SERIAL_RX_PIN -1 // 76
#endif
#ifndef E0_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN 77
#endif
#ifndef E1_SERIAL_RX_PIN
#define E1_SERIAL_RX_PIN -1 // 80
#endif
#ifndef E1_SERIAL_TX_PIN
#define E1_SERIAL_TX_PIN 81
#endif
#ifndef E2_SERIAL_RX_PIN
#define E2_SERIAL_RX_PIN -1 // 22
#endif
#ifndef E2_SERIAL_TX_PIN
#define E2_SERIAL_TX_PIN 82
#endif
#endif
//

View file

@ -0,0 +1,50 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
//
// FYSETC F6 v1.4 pin assignments
//
#define BOARD_NAME "FYSETC F6 1.4"
#define Z_MAX_PIN 2
#if HAS_TMC220x
/**
* TMC2208/TMC2209 stepper drivers
*/
#define X_SERIAL_RX_PIN 72
#define X_SERIAL_TX_PIN 71
#define Y_SERIAL_RX_PIN 73
#define Y_SERIAL_TX_PIN 78
#define Z_SERIAL_RX_PIN 75
#define Z_SERIAL_TX_PIN 79
#define E0_SERIAL_RX_PIN 77
#define E0_SERIAL_TX_PIN 81
#define E1_SERIAL_RX_PIN 76
#define E1_SERIAL_TX_PIN 80
#define E2_SERIAL_RX_PIN 62
#define E2_SERIAL_TX_PIN 82
#endif
#include "pins_FYSETC_F6_13.h"

View file

@ -98,6 +98,17 @@ lib_deps = ${common.lib_deps}
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
#
# FYSETC F6 V1.4
#
[env:FYSETC_F6_14]
platform = atmelavr
board = fysetc_f6_14
board_build.f_cpu = 16000000L
lib_deps = ${common.lib_deps}
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
#
# Sanguinololu (ATmega644p)
#