zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Merge pull request #335 from jcrocholl/Marlin_v1

Browse source 
Fix endstop pins for Printrboard
This commit is contained in:
daid 2012-12-11 02:59:58 -08:00
parent 724f5aa36b ca409e5531
commit d0319d45af
3 changed files with 13 additions and 8 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Marlin/Configuration.h
View file

@ -256,8 +256,8 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) #define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
// The position of the homing switches // The position of the homing switches
//#define MANUAL_HOME_POSITIONS // If defined, manualy programed locations will be used //#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
//#define BED_CENTER_AT_0_0 // If defined the center of the bed is defined as (0,0) //#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
//Manual homing switch locations: //Manual homing switch locations:
#define MANUAL_X_HOME_POS 0 #define MANUAL_X_HOME_POS 0

2
Marlin/Configuration_adv.h
View file

@ -78,7 +78,7 @@
//// AUTOSET LOCATIONS OF LIMIT SWITCHES //// AUTOSET LOCATIONS OF LIMIT SWITCHES
//// Added by ZetaPhoenix 09-15-2012 //// Added by ZetaPhoenix 09-15-2012
#ifdef MANUAL_HOME_POSITION //Use manual limit switch locations #ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations
#define X_HOME_POS MANUAL_X_HOME_POS #define X_HOME_POS MANUAL_X_HOME_POS
#define Y_HOME_POS MANUAL_Y_HOME_POS #define Y_HOME_POS MANUAL_Y_HOME_POS
#define Z_HOME_POS MANUAL_Z_HOME_POS #define Z_HOME_POS MANUAL_Z_HOME_POS

15
Marlin/pins.h
View file

@ -973,19 +973,16 @@
#define X_STEP_PIN 0 #define X_STEP_PIN 0
#define X_DIR_PIN 1 #define X_DIR_PIN 1
#define X_ENABLE_PIN 39 #define X_ENABLE_PIN 39
#define X_MIN_PIN 13
#define X_MAX_PIN -1 #define X_MAX_PIN -1
#define Y_STEP_PIN 2 #define Y_STEP_PIN 2
#define Y_DIR_PIN 3 #define Y_DIR_PIN 3
#define Y_ENABLE_PIN 38 #define Y_ENABLE_PIN 38
#define Y_MIN_PIN 14
#define Y_MAX_PIN -1 #define Y_MAX_PIN -1
#define Z_STEP_PIN 4 #define Z_STEP_PIN 4
#define Z_DIR_PIN 5 #define Z_DIR_PIN 5
#define Z_ENABLE_PIN 23 #define Z_ENABLE_PIN 23
#define Z_MIN_PIN 15
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#define E0_STEP_PIN 6 #define E0_STEP_PIN 6
@ -997,11 +994,19 @@
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed #define HEATER_BED_PIN 20 // Bed
#define FAN_PIN 22 // Fan #define FAN_PIN 22 // Fan
// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h
// for the fan and Teensyduino uses a different pin mapping.
#if MOTHERBOARD == 8 #if MOTHERBOARD == 8 // Teensylu
#define X_MIN_PIN 13
#define Y_MIN_PIN 14
#define Z_MIN_PIN 15
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering #define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#else #else // Printrboard
#define X_MIN_PIN 35
#define Y_MIN_PIN 8
#define Z_MIN_PIN 36
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering #define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering #define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#endif #endif