🔨 Creality v4 with STM32 HAL (#21999)
- New STM32 env for Creality V4 boards. - Separate Libmaple targets into their own `ini` file. - Temporarily remove unusable targets from `pins.h`. Co-authored-by: ellensp <ellensp@hotmsil.com> Co-authored-by: Scott Lahteine <github@thinkyhead.com>
This commit is contained in:
ellensp
Scott Lahteine
parent
fb0be29604
commit
d13ffa0aba
22
.github/workflows/test-builds.yml
vendored
22
.github/workflows/test-builds.yml
vendored
|
|
@ -56,29 +56,31 @@ jobs:
|
|||
|
||||
# STM32F1 (Maple) Environments
|
||||
|
||||
- STM32F103RC_btt
|
||||
- STM32F103RC_btt_USB
|
||||
- STM32F103RE_btt
|
||||
- STM32F103RE_btt_USB
|
||||
#- STM32F103RC_btt_maple
|
||||
- STM32F103RC_btt_USB_maple
|
||||
- STM32F103RC_fysetc
|
||||
- STM32F103RC_meeb
|
||||
- jgaurora_a5s_a1
|
||||
- STM32F103VE_longer
|
||||
- mks_robin
|
||||
#- mks_robin_maple
|
||||
- mks_robin_lite
|
||||
- mks_robin_pro
|
||||
- STM32F103RET6_creality
|
||||
- mks_robin_nano35
|
||||
#- mks_robin_nano35_maple
|
||||
#- STM32F103RET6_creality_maple
|
||||
|
||||
# STM32 (ST) Environments
|
||||
|
||||
- STM32F103RC_btt_stm32
|
||||
- STM32F103RC_btt
|
||||
#- STM32F103RC_btt_USB
|
||||
- STM32F103RE_btt
|
||||
- STM32F103RE_btt_USB
|
||||
- STM32F103RET6_creality
|
||||
- STM32F407VE_black
|
||||
- STM32F401VE_STEVAL
|
||||
- BIGTREE_BTT002
|
||||
- BIGTREE_SKR_PRO
|
||||
- BIGTREE_GTR_V1_0
|
||||
- mks_robin_stm32
|
||||
- mks_robin
|
||||
- ARMED
|
||||
- FYSETC_S6
|
||||
- STM32F070CB_malyan
|
||||
|
|
@ -88,7 +90,7 @@ jobs:
|
|||
- rumba32
|
||||
- LERDGEX
|
||||
- LERDGEK
|
||||
- mks_robin_nano35_stm32
|
||||
- mks_robin_nano35
|
||||
- NUCLEO_F767ZI
|
||||
- REMRAM_V1
|
||||
- BTT_SKR_SE_BX
|
||||
|
|
|
|||
82
Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp
Normal file
82
Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp
Normal file
|
|
@ -0,0 +1,82 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#ifdef STM32F1
|
||||
|
||||
/**
|
||||
* PersistentStore for Arduino-style EEPROM interface
|
||||
* with simple implementations supplied by Marlin.
|
||||
*/
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(IIC_BL24CXX_EEPROM)
|
||||
|
||||
#include "../shared/eeprom_if.h"
|
||||
#include "../shared/eeprom_api.h"
|
||||
|
||||
//
|
||||
// PersistentStore
|
||||
//
|
||||
|
||||
#ifndef MARLIN_EEPROM_SIZE
|
||||
#error "MARLIN_EEPROM_SIZE is required for IIC_BL24CXX_EEPROM."
|
||||
#endif
|
||||
|
||||
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
|
||||
|
||||
bool PersistentStore::access_start() { eeprom_init(); return true; }
|
||||
bool PersistentStore::access_finish() { return true; }
|
||||
|
||||
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
|
||||
uint16_t written = 0;
|
||||
while (size--) {
|
||||
uint8_t v = *value;
|
||||
uint8_t * const p = (uint8_t * const)pos;
|
||||
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
|
||||
eeprom_write_byte(p, v);
|
||||
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
crc16(crc, &v, 1);
|
||||
pos++;
|
||||
value++;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
|
||||
do {
|
||||
uint8_t * const p = (uint8_t * const)pos;
|
||||
uint8_t c = eeprom_read_byte(p);
|
||||
if (writing) *value = c;
|
||||
crc16(crc, &c, 1);
|
||||
pos++;
|
||||
value++;
|
||||
} while (--size);
|
||||
return false;
|
||||
}
|
||||
|
||||
#endif // IIC_BL24CXX_EEPROM
|
||||
#endif // STM32F1
|
||||
54
Marlin/src/HAL/STM32/eeprom_if_iic.cpp
Normal file
54
Marlin/src/HAL/STM32/eeprom_if_iic.cpp
Normal file
|
|
@ -0,0 +1,54 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Platform-independent Arduino functions for I2C EEPROM.
|
||||
* Enable USE_SHARED_EEPROM if not supplied by the framework.
|
||||
*/
|
||||
|
||||
#ifdef STM32F1
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(IIC_BL24CXX_EEPROM)
|
||||
|
||||
#include "../../libs/BL24CXX.h"
|
||||
#include "../shared/eeprom_if.h"
|
||||
|
||||
void eeprom_init() { BL24CXX::init(); }
|
||||
|
||||
// ------------------------
|
||||
// Public functions
|
||||
// ------------------------
|
||||
|
||||
void eeprom_write_byte(uint8_t *pos, uint8_t value) {
|
||||
const unsigned eeprom_address = (unsigned)pos;
|
||||
return BL24CXX::writeOneByte(eeprom_address, value);
|
||||
}
|
||||
|
||||
uint8_t eeprom_read_byte(uint8_t *pos) {
|
||||
const unsigned eeprom_address = (unsigned)pos;
|
||||
return BL24CXX::readOneByte(eeprom_address);
|
||||
}
|
||||
|
||||
#endif // IIC_BL24CXX_EEPROM
|
||||
#endif // STM32F1
|
||||
|
|
@ -27,7 +27,12 @@
|
|||
*/
|
||||
|
||||
#include "BL24CXX.h"
|
||||
#include <libmaple/gpio.h>
|
||||
#ifdef __STM32F1__
|
||||
#include <libmaple/gpio.h>
|
||||
#else
|
||||
#include "../HAL/shared/Delay.h"
|
||||
#define delay_us(n) DELAY_US(n)
|
||||
#endif
|
||||
|
||||
#ifndef EEPROM_WRITE_DELAY
|
||||
#define EEPROM_WRITE_DELAY 10
|
||||
|
|
@ -37,8 +42,13 @@
|
|||
#endif
|
||||
|
||||
// IO direction setting
|
||||
#define SDA_IN() do{ PIN_MAP[IIC_EEPROM_SDA].gpio_device->regs->CRH &= 0XFFFF0FFF; PIN_MAP[IIC_EEPROM_SDA].gpio_device->regs->CRH |= 8 << 12; }while(0)
|
||||
#define SDA_OUT() do{ PIN_MAP[IIC_EEPROM_SDA].gpio_device->regs->CRH &= 0XFFFF0FFF; PIN_MAP[IIC_EEPROM_SDA].gpio_device->regs->CRH |= 3 << 12; }while(0)
|
||||
#ifdef __STM32F1__
|
||||
#define SDA_IN() do{ PIN_MAP[IIC_EEPROM_SDA].gpio_device->regs->CRH &= 0XFFFF0FFF; PIN_MAP[IIC_EEPROM_SDA].gpio_device->regs->CRH |= 8 << 12; }while(0)
|
||||
#define SDA_OUT() do{ PIN_MAP[IIC_EEPROM_SDA].gpio_device->regs->CRH &= 0XFFFF0FFF; PIN_MAP[IIC_EEPROM_SDA].gpio_device->regs->CRH |= 3 << 12; }while(0)
|
||||
#elif STM32F1
|
||||
#define SDA_IN() SET_INPUT(IIC_EEPROM_SDA)
|
||||
#define SDA_OUT() SET_OUTPUT(IIC_EEPROM_SDA)
|
||||
#endif
|
||||
|
||||
// IO ops
|
||||
#define IIC_SCL_0() WRITE(IIC_EEPROM_SCL, LOW)
|
||||
|
|
|
|||
|
|
@ -489,13 +489,13 @@
|
|||
#elif MB(CHITU3D)
|
||||
#include "stm32f1/pins_CHITU3D.h" // STM32F1 env:STM32F103RE
|
||||
#elif MB(MKS_ROBIN)
|
||||
#include "stm32f1/pins_MKS_ROBIN.h" // STM32F1 env:mks_robin env:mks_robin_stm32
|
||||
#include "stm32f1/pins_MKS_ROBIN.h" // STM32F1 env:mks_robin env:mks_robin_maple
|
||||
#elif MB(MKS_ROBIN_MINI)
|
||||
#include "stm32f1/pins_MKS_ROBIN_MINI.h" // STM32F1 env:mks_robin_mini
|
||||
#elif MB(MKS_ROBIN_NANO)
|
||||
#include "stm32f1/pins_MKS_ROBIN_NANO.h" // STM32F1 env:mks_robin_nano35 env:mks_robin_nano35_stm32
|
||||
#include "stm32f1/pins_MKS_ROBIN_NANO.h" // STM32F1 env:mks_robin_nano35 env:mks_robin_nano35_maple
|
||||
#elif MB(MKS_ROBIN_NANO_V2)
|
||||
#include "stm32f1/pins_MKS_ROBIN_NANO_V2.h" // STM32F1 env:mks_robin_nano35 env:mks_robin_nano35_stm32
|
||||
#include "stm32f1/pins_MKS_ROBIN_NANO_V2.h" // STM32F1 env:mks_robin_nano35 env:mks_robin_nano35_maple
|
||||
#elif MB(MKS_ROBIN_LITE)
|
||||
#include "stm32f1/pins_MKS_ROBIN_LITE.h" // STM32F1 env:mks_robin_lite
|
||||
#elif MB(MKS_ROBIN_LITE3)
|
||||
|
|
@ -513,17 +513,17 @@
|
|||
#elif MB(MKS_ROBIN_E3P)
|
||||
#include "stm32f1/pins_MKS_ROBIN_E3P.h" // STM32F1 env:mks_robin_e3p
|
||||
#elif MB(BTT_SKR_MINI_V1_1)
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_V1_1.h" // STM32F1 env:STM32F103RC_btt_stm32 env:STM32F103RC_btt_512K_stm32 env:STM32F103RC_btt_USB_stm32 env:STM32F103RC_btt_512K_USB_stm32 env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_USB env:STM32F103RC_btt_512K_USB
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_V1_1.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_maple env:STM32F103RC_btt_512K_maple env:STM32F103RC_btt_USB_maple env:STM32F103RC_btt_512K_USB_maple
|
||||
#elif MB(BTT_SKR_MINI_E3_V1_0)
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h" // STM32F1 env:STM32F103RC_btt_stm32 env:STM32F103RC_btt_512K_stm32 env:STM32F103RC_btt_USB_stm32 env:STM32F103RC_btt_512K_USB_stm32 env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_USB env:STM32F103RC_btt_512K_USB
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_maple env:STM32F103RC_btt_512K_maple env:STM32F103RC_btt_USB_maple env:STM32F103RC_btt_512K_USB_maple
|
||||
#elif MB(BTT_SKR_MINI_E3_V1_2)
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h" // STM32F1 env:STM32F103RC_btt_stm32 env:STM32F103RC_btt_512K_stm32 env:STM32F103RC_btt_USB_stm32 env:STM32F103RC_btt_512K_USB_stm32 env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_USB env:STM32F103RC_btt_512K_USB
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_maple env:STM32F103RC_btt_512K_maple env:STM32F103RC_btt_USB_maple env:STM32F103RC_btt_512K_USB_maple
|
||||
#elif MB(BTT_SKR_MINI_E3_V2_0)
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h" // STM32F1 env:STM32F103RC_btt_stm32 env:STM32F103RC_btt_512K_stm32 env:STM32F103RC_btt_USB_stm32 env:STM32F103RC_btt_512K_USB_stm32 env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_USB env:STM32F103RC_btt_512K_USB
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_maple env:STM32F103RC_btt_512K_maple env:STM32F103RC_btt_USB_maple env:STM32F103RC_btt_512K_USB_maple
|
||||
#elif MB(BTT_SKR_MINI_MZ_V1_0)
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_MZ_V1_0.h" // STM32F1 env:STM32F103RC_btt_stm32 env:STM32F103RC_btt_512K_stm32 env:STM32F103RC_btt_USB_stm32 env:STM32F103RC_btt_512K_USB_stm32 env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_USB env:STM32F103RC_btt_512K_USB
|
||||
#include "stm32f1/pins_BTT_SKR_MINI_MZ_V1_0.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_maple env:STM32F103RC_btt_512K_maple env:STM32F103RC_btt_USB_maple env:STM32F103RC_btt_512K_USB_maple
|
||||
#elif MB(BTT_SKR_E3_DIP)
|
||||
#include "stm32f1/pins_BTT_SKR_E3_DIP.h" // STM32F1 env:STM32F103RE_btt env:STM32F103RE_btt_USB env:STM32F103RC_btt env:STM32F103RC_btt_512K env:STM32F103RC_btt_USB env:STM32F103RC_btt_512K_USB
|
||||
#include "stm32f1/pins_BTT_SKR_E3_DIP.h" // STM32F1 env:STM32F103RE_btt env:STM32F103RE_btt_USB env:STM32F103RC_btt env:STM32F103RC_btt_512K
|
||||
#elif MB(BTT_SKR_CR6)
|
||||
#include "stm32f1/pins_BTT_SKR_CR6.h" // STM32F1 env:STM32F103RE_btt env:STM32F103RE_btt_USB
|
||||
#elif MB(JGAURORA_A5S_A1)
|
||||
|
|
@ -543,17 +543,17 @@
|
|||
#elif MB(CHITU3D_V6)
|
||||
#include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103
|
||||
#elif MB(CREALITY_V4)
|
||||
#include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple
|
||||
#elif MB(CREALITY_V4210)
|
||||
#include "stm32f1/pins_CREALITY_V4210.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#include "stm32f1/pins_CREALITY_V4210.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple
|
||||
#elif MB(CREALITY_V427)
|
||||
#include "stm32f1/pins_CREALITY_V427.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#include "stm32f1/pins_CREALITY_V427.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple
|
||||
#elif MB(CREALITY_V431)
|
||||
#include "stm32f1/pins_CREALITY_V431.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#include "stm32f1/pins_CREALITY_V431.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple
|
||||
#elif MB(CREALITY_V452)
|
||||
#include "stm32f1/pins_CREALITY_V452.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#include "stm32f1/pins_CREALITY_V452.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple
|
||||
#elif MB(CREALITY_V453)
|
||||
#include "stm32f1/pins_CREALITY_V453.h" // STM32F1 env:STM32F103RET6_creality
|
||||
#include "stm32f1/pins_CREALITY_V453.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple
|
||||
#elif MB(TRIGORILLA_PRO)
|
||||
#include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro
|
||||
#elif MB(FLY_MINI)
|
||||
|
|
|
|||
|
|
@ -21,6 +21,6 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#if NOT_TARGET(__STM32F1__)
|
||||
#if NOT_TARGET(__STM32F1__, STM32F1)
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -2,9 +2,9 @@
|
|||
# buildroot/share/PlatformIO/scripts/mks_encrypt.py
|
||||
#
|
||||
# Apply encryption and save as 'build.firmware' for these environments:
|
||||
# - env:mks_robin_stm32
|
||||
# - env:mks_robin
|
||||
# - env:flsun_hispeedv1
|
||||
# - env:mks_robin_nano35_stm32
|
||||
# - env:mks_robin_nano35
|
||||
#
|
||||
Import("env")
|
||||
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ set -e
|
|||
# Build with the default configurations
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1 BAUDRATE_2 115200
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for STM32F103RC BigTreeTech (SKR Mini v1.1)
|
||||
# Build tests for STM32F103RC BigTreeTech (SKR Mini v1.1) with LibMaple STM32F1 HAL
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
|
|
@ -10,7 +10,7 @@ set -e
|
|||
# Build with the default configurations
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1 BAUDRATE_2 115200
|
||||
exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3"
|
||||
|
||||
# clean up
|
||||
|
|
@ -1,6 +1,6 @@
|
|||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for STM32F103RC BigTreeTech (SKR Mini E3)
|
||||
# Build tests for STM32F103RC BigTreeTech (SKR Mini E3) with LibMaple STM32F1 HAL
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
|
|
@ -1,22 +1,13 @@
|
|||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for MKS Robin
|
||||
# (STM32F1 genericSTM32F103ZE)
|
||||
# Build tests for MKS Robin (HAL/STM32)
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
use_example_configs Mks/Robin
|
||||
exec_test $1 $2 "MKS Robin config (FSMC Color UI)" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin LVGL FSMC
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
opt_enable TFT_LVGL_UI TFT_RES_480x320
|
||||
exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
|
||||
exec_test $1 $2 "MKS Robin base configuration" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
|
|
|||
22
buildroot/tests/mks_robin_maple
Executable file
22
buildroot/tests/mks_robin_maple
Executable file
|
|
@ -0,0 +1,22 @@
|
|||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for MKS Robin with LibMaple STM32F1 HAL
|
||||
# (STM32F1 genericSTM32F103ZE)
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
use_example_configs Mks/Robin
|
||||
exec_test $1 $2 "MKS Robin config (FSMC Color UI)" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin LVGL FSMC
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
opt_enable TFT_LVGL_UI TFT_RES_480x320
|
||||
exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
|
@ -24,15 +24,24 @@ opt_disable TFT_INTERFACE_FSMC
|
|||
opt_enable TFT_INTERFACE_SPI
|
||||
exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin nano v1.2 LVGL FSMC
|
||||
#
|
||||
# use_example_configs Mks/Robin
|
||||
# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
|
||||
# opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
# opt_enable TFT_LVGL_UI TFT_RES_480x320
|
||||
# exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano LVGL SPI
|
||||
# (Robin v2 nano has no FSMC interface)
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 SERIAL_PORT_2
|
||||
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 MKS_WIFI_MODULE
|
||||
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI w/ WiFi" "$3"
|
||||
# use_example_configs Mks/Robin
|
||||
# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
# opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
# opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
|
||||
# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano New Color UI 480x320 SPI
|
||||
|
|
@ -42,27 +51,17 @@ use_example_configs Mks/Robin
|
|||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
|
||||
opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
|
||||
opt_enable BINARY_FILE_TRANSFER
|
||||
exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI + BINARY_FILE_TRANSFER" "$3"
|
||||
exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano LVGL SPI + TMC
|
||||
# (Robin v2 nano has no FSMC interface)
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
|
||||
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano New Color UI 480x320 SPI Without Touch Screen
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240 TOUCH_SCREEN
|
||||
opt_enable TFT_INTERFACE_SPI TFT_RES_480x320 TFT_COLOR_UI
|
||||
exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI without TOUCH_SCREEN" "$3"
|
||||
# use_example_configs Mks/Robin
|
||||
# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209
|
||||
# opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
# opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
|
||||
# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
|
|
|||
68
buildroot/tests/mks_robin_nano35_maple
Executable file
68
buildroot/tests/mks_robin_nano35_maple
Executable file
|
|
@ -0,0 +1,68 @@
|
|||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for MKS Robin nano with LibMaple STM32F1 HAL
|
||||
# (STM32F1 genericSTM32F103VE)
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
#
|
||||
# MKS Robin nano v1.2 Emulated DOGM FSMC
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
|
||||
exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano Emulated DOGM SPI
|
||||
# (Robin v2 nano has no FSMC interface)
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC
|
||||
opt_enable TFT_INTERFACE_SPI
|
||||
exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano LVGL SPI
|
||||
# (Robin v2 nano has no FSMC interface)
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 SERIAL_PORT_2
|
||||
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 MKS_WIFI_MODULE
|
||||
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI w/ WiFi" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano New Color UI 480x320 SPI
|
||||
# (Robin v2 nano has no FSMC interface)
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
|
||||
opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
|
||||
opt_enable BINARY_FILE_TRANSFER
|
||||
exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI + BINARY_FILE_TRANSFER" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano LVGL SPI + TMC
|
||||
# (Robin v2 nano has no FSMC interface)
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
|
||||
exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano New Color UI 480x320 SPI Without Touch Screen
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240 TOUCH_SCREEN
|
||||
opt_enable TFT_INTERFACE_SPI TFT_RES_480x320 TFT_COLOR_UI
|
||||
exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI without TOUCH_SCREEN" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
|
@ -1,67 +0,0 @@
|
|||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for MKS Robin nano
|
||||
# (STM32F1 genericSTM32F103VE)
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
#
|
||||
# MKS Robin nano v1.2 Emulated DOGM FSMC
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
|
||||
exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano Emulated DOGM SPI
|
||||
# (Robin v2 nano has no FSMC interface)
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC
|
||||
opt_enable TFT_INTERFACE_SPI
|
||||
exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin nano v1.2 LVGL FSMC
|
||||
#
|
||||
# use_example_configs Mks/Robin
|
||||
# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO
|
||||
# opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
# opt_enable TFT_LVGL_UI TFT_RES_480x320
|
||||
# exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano LVGL SPI
|
||||
# (Robin v2 nano has no FSMC interface)
|
||||
#
|
||||
# use_example_configs Mks/Robin
|
||||
# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
# opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
# opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
|
||||
# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano New Color UI 480x320 SPI
|
||||
# (Robin v2 nano has no FSMC interface)
|
||||
#
|
||||
use_example_configs Mks/Robin
|
||||
opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
opt_disable TFT_INTERFACE_FSMC TFT_RES_320x240
|
||||
opt_enable TFT_INTERFACE_SPI TFT_RES_480x320
|
||||
exec_test $1 $2 "MKS Robin v2 nano New Color UI 480x320 SPI" "$3"
|
||||
|
||||
#
|
||||
# MKS Robin v2 nano LVGL SPI + TMC
|
||||
# (Robin v2 nano has no FSMC interface)
|
||||
#
|
||||
# use_example_configs Mks/Robin
|
||||
# opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209
|
||||
# opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
|
||||
# opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320
|
||||
# exec_test $1 $2 "MKS Robin v2 nano LVGL SPI + TMC" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
|
|
@ -1,13 +0,0 @@
|
|||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for MKS Robin (HAL/STM32)
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
use_example_configs Mks/Robin
|
||||
exec_test $1 $2 "MKS Robin base configuration" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
363
ini/stm32f1-maple.ini
Normal file
363
ini/stm32f1-maple.ini
Normal file
|
|
@ -0,0 +1,363 @@
|
|||
#
|
||||
# Marlin Firmware
|
||||
# PlatformIO Configuration File
|
||||
#
|
||||
|
||||
#################################
|
||||
#
|
||||
# STM32F1 Architecture with LibMaple STM32F1 HAL
|
||||
#
|
||||
# Naming Example: STM32F103RCT6
|
||||
#
|
||||
# F : Foundation (sometimes High Performance F2/F4)
|
||||
# 1 : Cortex M1 core
|
||||
# 03 : Line/Features
|
||||
# R : 64 or 66 pins (V:100, Z:144, I:176)
|
||||
# C : 256KB Flash-memory (D:384KB, E:512KB, G:1024KB)
|
||||
# T : LQFP package
|
||||
# 6 : -40...85°C (7: ...105°C)
|
||||
#
|
||||
#################################
|
||||
|
||||
#
|
||||
# HAL/STM32F1 Common Environment values
|
||||
#
|
||||
[common_stm32f1]
|
||||
platform = ststm32@~12.1
|
||||
board_build.core = maple
|
||||
build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py
|
||||
${common.build_flags}
|
||||
-DARDUINO_ARCH_STM32
|
||||
build_unflags = -std=gnu11 -std=gnu++11
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/STM32F1>
|
||||
lib_ignore = SPI, FreeRTOS701, FreeRTOS821
|
||||
lib_deps = ${common.lib_deps}
|
||||
SoftwareSerialM
|
||||
platform_packages = tool-stm32duino
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/fix_framework_weakness.py
|
||||
|
||||
#
|
||||
# STM32F103RC
|
||||
#
|
||||
[common_STM32F103RC_maple]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RC
|
||||
monitor_speed = 115200
|
||||
|
||||
#
|
||||
# MEEB_3DP (STM32F103RCT6 with 512K)
|
||||
#
|
||||
[env:STM32F103RC_meeb]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_STM32F103RC_maple
|
||||
board = marlin_MEEB_3DP
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DDEBUG_LEVEL=0
|
||||
-DSS_TIMER=4
|
||||
-DSTM32_FLASH_SIZE=512
|
||||
-DHSE_VALUE=12000000U
|
||||
-DUSE_USB_COMPOSITE
|
||||
-DVECT_TAB_OFFSET=0x2000
|
||||
-DGENERIC_BOOTLOADER
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
|
||||
lib_deps = ${common.lib_deps}
|
||||
SoftwareSerialM
|
||||
USBComposite for STM32F1@0.91
|
||||
custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use
|
||||
debug_tool = stlink
|
||||
upload_protocol = dfu
|
||||
|
||||
#
|
||||
# FYSETC STM32F103RC
|
||||
#
|
||||
[env:STM32F103RC_fysetc]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_STM32F103RC_maple
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
|
||||
build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0
|
||||
lib_ldf_mode = chain
|
||||
debug_tool = stlink
|
||||
upload_protocol = serial
|
||||
|
||||
#
|
||||
# BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
|
||||
#
|
||||
# STM32F103RC_btt_maple ............. RCT6 with 256K
|
||||
# STM32F103RC_btt_USB_maple ......... RCT6 with 256K (USB mass storage)
|
||||
# STM32F103RC_btt_512K_maple ........ RCT6 with 512K
|
||||
# STM32F103RC_btt_512K_USB_maple .... RCT6 with 512K (USB mass storage)
|
||||
#
|
||||
# WARNING! If you have an SKR Mini v1.1 or an SKR Mini E3 1.0 / 1.2 / 2.0 / DIP
|
||||
# and experience a printer freeze, re-flash Marlin using the regular (non-512K)
|
||||
# build option. 256K chips may be re-branded 512K chips, but this means the
|
||||
# upper 256K is sketchy, and failure is very likely.
|
||||
#
|
||||
|
||||
[env:STM32F103RC_btt_maple]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_STM32F103RC_maple
|
||||
board_build.address = 0x08007000
|
||||
board_build.ldscript = STM32F103RC_SKR_MINI_256K.ld
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DDEBUG_LEVEL=0 -DSS_TIMER=4
|
||||
monitor_speed = 115200
|
||||
|
||||
[env:STM32F103RC_btt_USB_maple]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RC_btt_maple
|
||||
build_flags = ${env:STM32F103RC_btt_maple.build_flags} -DUSE_USB_COMPOSITE
|
||||
lib_deps = ${env:STM32F103RC_btt_maple.lib_deps}
|
||||
USBComposite for STM32F1@0.91
|
||||
|
||||
[env:STM32F103RC_btt_512K_maple]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RC_btt_maple
|
||||
board_build.ldscript = STM32F103RC_SKR_MINI_512K.ld
|
||||
board_upload.maximum_size = 524288
|
||||
build_flags = ${env:STM32F103RC_btt_maple.build_flags} -DSTM32_FLASH_SIZE=512
|
||||
|
||||
[env:STM32F103RC_btt_512K_USB_maple]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RC_btt_512K_maple
|
||||
build_flags = ${env:STM32F103RC_btt_512K_maple.build_flags} -DUSE_USB_COMPOSITE
|
||||
lib_deps = ${env:STM32F103RC_btt_512K_maple.lib_deps}
|
||||
USBComposite for STM32F1@0.91
|
||||
|
||||
#
|
||||
# STM32F103RE with Unified STM32F1 HAL
|
||||
#
|
||||
[common_STM32F103RE]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RE
|
||||
monitor_speed = 115200
|
||||
|
||||
#
|
||||
# Creality (STM32F103RET6)
|
||||
#
|
||||
[env:STM32F103RET6_creality_maple]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_STM32F103RE
|
||||
build_flags = ${common_stm32f1.build_flags} -DTEMP_TIMER_CHAN=4
|
||||
board_build.address = 0x08007000
|
||||
board_build.ldscript = creality.ld
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/random-bin.py
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
|
||||
#
|
||||
# STM32F103RE_btt ............. RET6
|
||||
# STM32F103RE_btt_USB ......... RET6 (USB mass storage)
|
||||
#
|
||||
[env:STM32F103RE_btt]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_STM32F103RE
|
||||
board_build.address = 0x08007000
|
||||
board_build.ldscript = STM32F103RE_SKR_E3_DIP.ld
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -DSS_TIMER=4
|
||||
debug_tool = stlink
|
||||
upload_protocol = stlink
|
||||
|
||||
[env:STM32F103RE_btt_USB]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RE_btt
|
||||
build_flags = ${env:STM32F103RE_btt.build_flags} -DUSE_USB_COMPOSITE
|
||||
lib_deps = ${common_stm32f1.lib_deps}
|
||||
USBComposite for STM32F1@0.91
|
||||
|
||||
#
|
||||
# Geeetech GTM32 (STM32F103VET6)
|
||||
#
|
||||
[env:STM32F103VE_GTM32]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103VE
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-ffunction-sections -fdata-sections -nostdlib -MMD
|
||||
-DMCU_STM32F103VE -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1 -DBOARD_generic_stm32f103v
|
||||
-DDEBUG_LEVEL=DEBUG_NONE -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DVECT_TAB_ADDR=0x8000000
|
||||
-DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
|
||||
upload_protocol = serial
|
||||
|
||||
#
|
||||
# Longer 3D board in Alfawise U20 (STM32F103VET6)
|
||||
#
|
||||
[env:STM32F103VE_longer]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103VE
|
||||
board_build.address = 0x08010000
|
||||
board_build.ldscript = STM32F103VE_longer.ld
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12
|
||||
build_unflags = ${common_stm32f1.build_unflags}
|
||||
-DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
|
||||
|
||||
#
|
||||
# MKS Robin Mini (STM32F103VET6)
|
||||
#
|
||||
[env:mks_robin_mini]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103VE
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_mini.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DMCU_STM32F103VE
|
||||
|
||||
#
|
||||
# MKS Robin Nano (STM32F103VET6)
|
||||
#
|
||||
[env:mks_robin_nano35_maple]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103VE
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_nano35.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DMCU_STM32F103VE -DSS_TIMER=4
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
|
||||
#
|
||||
# MKS Robin (STM32F103ZET6)
|
||||
#
|
||||
[env:mks_robin_maple]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103ZE
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DSS_TIMER=4 -DSTM32_XL_DENSITY
|
||||
|
||||
#
|
||||
# MKS Robin Pro (STM32F103ZET6)
|
||||
#
|
||||
[env:mks_robin_pro]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:mks_robin_maple
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_pro.py
|
||||
|
||||
#
|
||||
# TRIGORILLA PRO (STM32F103ZET6)
|
||||
#
|
||||
[env:trigorilla_pro]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:mks_robin_maple
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
|
||||
#
|
||||
# MKS Robin E3D (STM32F103RCT6) and
|
||||
# MKS Robin E3 with TMC2209
|
||||
#
|
||||
[env:mks_robin_e3]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RC
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_e3.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DDEBUG_LEVEL=0 -DSS_TIMER=4
|
||||
|
||||
#
|
||||
# MKS Robin E3p (STM32F103VET6)
|
||||
# - LVGL UI
|
||||
#
|
||||
[env:mks_robin_e3p]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103VE
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_e3p.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DMCU_STM32F103VE -DSS_TIMER=4
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
|
||||
#
|
||||
# MKS Robin Lite/Lite2 (STM32F103RCT6)
|
||||
#
|
||||
[env:mks_robin_lite]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RC
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_lite.py
|
||||
|
||||
#
|
||||
# MKS ROBIN LITE3 (STM32F103RCT6)
|
||||
#
|
||||
[env:mks_robin_lite3]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RC
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_lite3.py
|
||||
|
||||
#
|
||||
# JGAurora A5S A1 (STM32F103ZET6)
|
||||
#
|
||||
[env:jgaurora_a5s_a1]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103ZE
|
||||
board_build.address = 0x0800A000
|
||||
board_build.ldscript = jgaurora_a5s_a1.ld
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DSTM32F1xx -DSTM32_XL_DENSITY
|
||||
|
||||
#
|
||||
# Malyan M200 (STM32F103CB)
|
||||
#
|
||||
[env:STM32F103CB_malyan]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = marlin_malyanM200
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DMCU_STM32F103CB -D__STM32F1__=1 -std=c++1y -DSERIAL_USB -ffunction-sections -fdata-sections
|
||||
-Wl,--gc-sections -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
|
||||
lib_ignore = ${common_stm32f1.lib_ignore}
|
||||
SoftwareSerialM
|
||||
|
||||
#
|
||||
# Chitu boards like Tronxy X5s (STM32F103ZET6)
|
||||
#
|
||||
[env:chitu_f103]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = marlin_CHITU_F103
|
||||
extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
|
||||
pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/chitu_crypt.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DSTM32F1xx -DSTM32_XL_DENSITY
|
||||
build_unflags = ${common_stm32f1.build_unflags}
|
||||
-DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
|
||||
|
||||
#
|
||||
# Some Chitu V5 boards have a problem with GPIO init.
|
||||
# Use this target if G28 or G29 are always failing.
|
||||
#
|
||||
[env:chitu_v5_gpio_init]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:chitu_f103
|
||||
build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX
|
||||
391
ini/stm32f1.ini
391
ini/stm32f1.ini
|
|
@ -5,7 +5,7 @@
|
|||
|
||||
#################################
|
||||
#
|
||||
# STM32F1 Architecture
|
||||
# STM32F1 Architecture with unified STM32 HAL
|
||||
#
|
||||
# Naming Example: STM32F103RCT6
|
||||
#
|
||||
|
|
@ -32,71 +32,6 @@ build_flags = ${common.build_flags}
|
|||
build_unflags = -std=gnu++11
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/STM32> +<src/HAL/shared/backtrace>
|
||||
|
||||
#
|
||||
# HAL/STM32F1 Common Environment values
|
||||
#
|
||||
[common_stm32f1]
|
||||
platform = ststm32@~12.1
|
||||
board_build.core = maple
|
||||
build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py
|
||||
${common.build_flags}
|
||||
-DARDUINO_ARCH_STM32
|
||||
build_unflags = -std=gnu11 -std=gnu++11
|
||||
src_filter = ${common.default_src_filter} +<src/HAL/STM32F1>
|
||||
lib_ignore = SPI, FreeRTOS701, FreeRTOS821
|
||||
lib_deps = ${common.lib_deps}
|
||||
SoftwareSerialM
|
||||
platform_packages = tool-stm32duino
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/fix_framework_weakness.py
|
||||
|
||||
#
|
||||
# STM32F103RC
|
||||
#
|
||||
[env:STM32F103RC]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RC
|
||||
monitor_speed = 115200
|
||||
|
||||
#
|
||||
# MEEB_3DP (STM32F103RCT6 with 512K)
|
||||
#
|
||||
[env:STM32F103RC_meeb]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = marlin_MEEB_3DP
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DDEBUG_LEVEL=0
|
||||
-DSS_TIMER=4
|
||||
-DSTM32_FLASH_SIZE=512
|
||||
-DHSE_VALUE=12000000U
|
||||
-DUSE_USB_COMPOSITE
|
||||
-DVECT_TAB_OFFSET=0x2000
|
||||
-DGENERIC_BOOTLOADER
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
|
||||
lib_deps = ${common.lib_deps}
|
||||
SoftwareSerialM
|
||||
USBComposite for STM32F1@0.91
|
||||
custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use
|
||||
debug_tool = stlink
|
||||
upload_protocol = dfu
|
||||
|
||||
#
|
||||
# STM32F103RC_fysetc
|
||||
#
|
||||
[env:STM32F103RC_fysetc]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RC
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
|
||||
build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0
|
||||
lib_ldf_mode = chain
|
||||
debug_tool = stlink
|
||||
upload_protocol = serial
|
||||
|
||||
#
|
||||
# BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
|
||||
#
|
||||
|
|
@ -110,44 +45,7 @@ upload_protocol = serial
|
|||
# build option. 256K chips may be re-branded 512K chips, but this means the
|
||||
# upper 256K is sketchy, and failure is very likely.
|
||||
#
|
||||
|
||||
[env:STM32F103RC_btt]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RC
|
||||
board_build.address = 0x08007000
|
||||
board_build.ldscript = STM32F103RC_SKR_MINI_256K.ld
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DDEBUG_LEVEL=0 -DSS_TIMER=4
|
||||
monitor_speed = 115200
|
||||
|
||||
[env:STM32F103RC_btt_USB]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RC_btt
|
||||
build_flags = ${env:STM32F103RC_btt.build_flags} -DUSE_USB_COMPOSITE
|
||||
lib_deps = ${env:STM32F103RC_btt.lib_deps}
|
||||
USBComposite for STM32F1@0.91
|
||||
|
||||
[env:STM32F103RC_btt_512K]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RC_btt
|
||||
board_build.ldscript = STM32F103RC_SKR_MINI_512K.ld
|
||||
board_upload.maximum_size=524288
|
||||
build_flags = ${env:STM32F103RC_btt.build_flags} -DSTM32_FLASH_SIZE=512
|
||||
|
||||
[env:STM32F103RC_btt_512K_USB]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RC_btt_512K
|
||||
build_flags = ${env:STM32F103RC_btt_512K.build_flags} -DUSE_USB_COMPOSITE
|
||||
lib_deps = ${env:STM32F103RC_btt_512K.lib_deps}
|
||||
USBComposite for STM32F1@0.91
|
||||
|
||||
#
|
||||
# STM32 HAL version of STM32F103RC_btt envs
|
||||
#
|
||||
|
||||
[env:STM32F103RC_stm32]
|
||||
[common_STM32F103RC]
|
||||
platform = ${common_stm32.platform}
|
||||
extends = common_stm32
|
||||
board = genericSTM32F103RC
|
||||
|
|
@ -159,21 +57,21 @@ extra_scripts = ${common.extra_scripts}
|
|||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
|
||||
|
||||
[env:STM32F103RC_btt_stm32]
|
||||
[env:STM32F103RC_btt]
|
||||
platform = ${common_stm32.platform}
|
||||
extends = env:STM32F103RC_stm32
|
||||
extends = common_STM32F103RC
|
||||
build_flags = ${common_stm32.build_flags} -DDEBUG_LEVEL=0 -DTIMER_SERVO=TIM5
|
||||
board_build.offset = 0x7000
|
||||
board_build.encrypt = No
|
||||
board_build.firmware = firmware.bin
|
||||
board_upload.offset_address = 0x08007000
|
||||
|
||||
[env:STM32F103RC_btt_USB_stm32]
|
||||
extends = env:STM32F103RC_btt_stm32
|
||||
[env:STM32F103RC_btt_USB]
|
||||
extends = env:STM32F103RC_btt
|
||||
platform = ${common_stm32.platform}
|
||||
platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-2.zip
|
||||
build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC
|
||||
build_flags = ${env:STM32F103RC_btt_stm32.build_flags} ${env:stm32_flash_drive.build_flags}
|
||||
build_flags = ${env:STM32F103RC_btt.build_flags} ${env:stm32_flash_drive.build_flags}
|
||||
-DUSBCON
|
||||
-DUSE_USBHOST_HS
|
||||
-DUSBD_IRQ_PRIO=5
|
||||
|
|
@ -181,122 +79,23 @@ build_flags = ${env:STM32F103RC_btt_stm32.build_flags} ${env:stm32_flash_d
|
|||
-DUSE_USB_HS_IN_FS
|
||||
-DUSBD_USE_CDC_MSC
|
||||
|
||||
[env:STM32F103RC_btt_512K_stm32]
|
||||
[env:STM32F103RC_btt_512K]
|
||||
platform = ${common_stm32.platform}
|
||||
extends = env:STM32F103RC_btt_stm32
|
||||
extends = env:STM32F103RC_btt
|
||||
board_upload.maximum_size = 524288
|
||||
build_flags = ${env:STM32F103RC_btt_stm32.build_flags} -DLD_MAX_DATA_SIZE=524288 -DSTM32_FLASH_SIZE=512
|
||||
build_flags = ${env:STM32F103RC_btt.build_flags} -DLD_MAX_DATA_SIZE=524288 -DSTM32_FLASH_SIZE=512
|
||||
|
||||
[env:STM32F103RC_btt_512K_USB_stm32]
|
||||
[env:STM32F103RC_btt_512K_USB]
|
||||
platform = ${common_stm32.platform}
|
||||
extends = env:STM32F103RC_btt_USB_stm32
|
||||
extends = env:STM32F103RC_btt_USB
|
||||
board_upload.maximum_size = 524288
|
||||
build_flags = ${env:STM32F103RC_btt_USB_stm32.build_flags} -DLD_MAX_DATA_SIZE=524288 -DSTM32_FLASH_SIZE=512
|
||||
build_flags = ${env:STM32F103RC_btt_USB.build_flags} -DLD_MAX_DATA_SIZE=524288 -DSTM32_FLASH_SIZE=512
|
||||
|
||||
#
|
||||
# STM32F103RE
|
||||
#
|
||||
[env:STM32F103RE]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RE
|
||||
monitor_speed = 115200
|
||||
|
||||
#
|
||||
# STM32F103RE_btt ............. RET6
|
||||
# STM32F103RE_btt_USB ......... RET6 (USB mass storage)
|
||||
#
|
||||
[env:STM32F103RE_btt]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RE
|
||||
board_build.address = 0x08007000
|
||||
board_build.ldscript = STM32F103RE_SKR_E3_DIP.ld
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -DSS_TIMER=4
|
||||
debug_tool = stlink
|
||||
upload_protocol = stlink
|
||||
|
||||
[env:STM32F103RE_btt_USB]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:STM32F103RE_btt
|
||||
build_flags = ${env:STM32F103RE_btt.build_flags} -DUSE_USB_COMPOSITE
|
||||
lib_deps = ${common_stm32f1.lib_deps}
|
||||
USBComposite for STM32F1@0.91
|
||||
|
||||
#
|
||||
# Geeetech GTM32 (STM32F103VET6)
|
||||
#
|
||||
[env:STM32F103VE_GTM32]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103VE
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-ffunction-sections -fdata-sections -nostdlib -MMD
|
||||
-DMCU_STM32F103VE -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1 -DBOARD_generic_stm32f103v
|
||||
-DDEBUG_LEVEL=DEBUG_NONE -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DVECT_TAB_ADDR=0x8000000
|
||||
-DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
|
||||
upload_protocol = serial
|
||||
|
||||
#
|
||||
# Longer 3D board in Alfawise U20 (STM32F103VET6)
|
||||
#
|
||||
[env:STM32F103VE_longer]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103VE
|
||||
board_build.address = 0x08010000
|
||||
board_build.ldscript = STM32F103VE_longer.ld
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12
|
||||
build_unflags = ${common_stm32f1.build_unflags}
|
||||
-DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
|
||||
|
||||
#
|
||||
# MKS Robin Mini (STM32F103VET6)
|
||||
#
|
||||
[env:mks_robin_mini]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103VE
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_mini.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DMCU_STM32F103VE
|
||||
|
||||
#
|
||||
# MKS Robin Nano (STM32F103VET6)
|
||||
#
|
||||
[env:mks_robin_nano35]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103VE
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_nano35.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DMCU_STM32F103VE -DSS_TIMER=4
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
|
||||
#
|
||||
# MKS Robin (STM32F103ZET6)
|
||||
#
|
||||
[env:mks_robin]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103ZE
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DSS_TIMER=4 -DSTM32_XL_DENSITY
|
||||
|
||||
# MKS Robin (STM32F103ZET6)
|
||||
# Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel
|
||||
#
|
||||
[env:mks_robin_stm32]
|
||||
[env:mks_robin]
|
||||
platform = ${common_stm32.platform}
|
||||
extends = common_stm32
|
||||
board = genericSTM32F103ZE
|
||||
|
|
@ -316,154 +115,30 @@ extra_scripts = ${common.extra_scripts}
|
|||
buildroot/share/PlatformIO/scripts/mks_encrypt.py
|
||||
lib_deps =
|
||||
|
||||
#
|
||||
# MKS Robin Pro (STM32F103ZET6)
|
||||
#
|
||||
[env:mks_robin_pro]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:mks_robin
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_pro.py
|
||||
|
||||
#
|
||||
# TRIGORILLA PRO (STM32F103ZET6)
|
||||
#
|
||||
[env:trigorilla_pro]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:mks_robin
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
|
||||
#
|
||||
# MKS Robin E3D (STM32F103RCT6) and
|
||||
# MKS Robin E3 with TMC2209
|
||||
#
|
||||
[env:mks_robin_e3]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RC
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_e3.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DDEBUG_LEVEL=0 -DSS_TIMER=4
|
||||
|
||||
#
|
||||
# MKS Robin E3p (STM32F103VET6)
|
||||
# - LVGL UI
|
||||
#
|
||||
[env:mks_robin_e3p]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103VE
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_e3p.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DMCU_STM32F103VE -DSS_TIMER=4
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
|
||||
#
|
||||
# MKS Robin Lite/Lite2 (STM32F103RCT6)
|
||||
#
|
||||
[env:mks_robin_lite]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RC
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_lite.py
|
||||
|
||||
#
|
||||
# MKS ROBIN LITE3 (STM32F103RCT6)
|
||||
#
|
||||
[env:mks_robin_lite3]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RC
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/mks_robin_lite3.py
|
||||
|
||||
#
|
||||
# FLY MINI (STM32F103RCT6)
|
||||
#
|
||||
[env:FLY_MINI]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103RC
|
||||
board_build.address = 0x08005000
|
||||
board_build.ldscript = fly_mini.ld
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DDEBUG_LEVEL=0 -DSS_TIMER=4
|
||||
|
||||
#
|
||||
# JGAurora A5S A1 (STM32F103ZET6)
|
||||
#
|
||||
[env:jgaurora_a5s_a1]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = genericSTM32F103ZE
|
||||
board_build.address = 0x0800A000
|
||||
board_build.ldscript = jgaurora_a5s_a1.ld
|
||||
extra_scripts = ${common_stm32f1.extra_scripts}
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DSTM32F1xx -DSTM32_XL_DENSITY
|
||||
|
||||
#
|
||||
# Malyan M200 (STM32F103CB)
|
||||
#
|
||||
[env:STM32F103CB_malyan]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = marlin_malyanM200
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DMCU_STM32F103CB -D__STM32F1__=1 -std=c++1y -DSERIAL_USB -ffunction-sections -fdata-sections
|
||||
-Wl,--gc-sections -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
|
||||
lib_ignore = ${common_stm32f1.lib_ignore}
|
||||
SoftwareSerialM
|
||||
|
||||
#
|
||||
# Chitu boards like Tronxy X5s (STM32F103ZET6)
|
||||
#
|
||||
[env:chitu_f103]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = common_stm32f1
|
||||
board = marlin_CHITU_F103
|
||||
extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
|
||||
pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
|
||||
buildroot/share/PlatformIO/scripts/chitu_crypt.py
|
||||
build_flags = ${common_stm32f1.build_flags}
|
||||
-DSTM32F1xx -DSTM32_XL_DENSITY
|
||||
build_unflags = ${common_stm32f1.build_unflags}
|
||||
-DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
|
||||
|
||||
#
|
||||
# Some Chitu V5 boards have a problem with GPIO init.
|
||||
# Use this target if G28 or G29 are always failing.
|
||||
#
|
||||
[env:chitu_v5_gpio_init]
|
||||
platform = ${common_stm32f1.platform}
|
||||
extends = env:chitu_f103
|
||||
build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX
|
||||
|
||||
#
|
||||
# Creality (STM32F103RET6)
|
||||
#
|
||||
[env:STM32F103RET6_creality]
|
||||
platform = ${env:STM32F103RE.platform}
|
||||
extends = env:STM32F103RE
|
||||
build_flags = ${env:STM32F103RE.build_flags} -DTEMP_TIMER_CHAN=4
|
||||
board_build.address = 0x08007000
|
||||
board_build.ldscript = creality.ld
|
||||
extra_scripts = ${env:STM32F103RE.extra_scripts}
|
||||
platform = ${common_stm32.platform}
|
||||
extends = common_stm32
|
||||
build_flags = ${common_stm32.build_flags} -DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED -DSS_TIMER=4 -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
|
||||
board = genericSTM32F103RE
|
||||
monitor_speed = 115200
|
||||
board_build.core = stm32
|
||||
board_build.variant = MARLIN_F103Rx
|
||||
board_build.offset = 0x7000
|
||||
board_build.ldscript = ldscript.ld
|
||||
board_upload.offset_address = 0x08007000
|
||||
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
|
||||
extra_scripts = ${common.extra_scripts}
|
||||
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
|
||||
pre:buildroot/share/PlatformIO/scripts/random-bin.py
|
||||
buildroot/share/PlatformIO/scripts/custom_board.py
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
|
||||
debug_tool = jlink
|
||||
upload_protocol = jlink
|
||||
|
||||
#
|
||||
# FLSUN QQS Pro (STM32F103VET6) using hal STM32
|
||||
# FLSUN QQS Pro (STM32F103VET6)
|
||||
# board Hispeedv1
|
||||
#
|
||||
[env:flsun_hispeedv1]
|
||||
|
|
@ -485,9 +160,9 @@ extra_scripts = ${common.extra_scripts}
|
|||
buildroot/share/PlatformIO/scripts/mks_encrypt.py
|
||||
|
||||
#
|
||||
# MKS Robin Nano V1.2 and V2 using hal STM32
|
||||
# MKS Robin Nano V1.2 and V2
|
||||
#
|
||||
[env:mks_robin_nano35_stm32]
|
||||
[env:mks_robin_nano35]
|
||||
platform = ${common_stm32.platform}
|
||||
extends = common_stm32
|
||||
build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3
|
||||
|
|
|
|||
|
|
@ -24,6 +24,7 @@ extra_configs =
|
|||
ini/native.ini
|
||||
ini/samd51.ini
|
||||
ini/stm32f0.ini
|
||||
ini/stm32f1-maple.ini
|
||||
ini/stm32f1.ini
|
||||
ini/stm32f4.ini
|
||||
ini/stm32f7.ini
|
||||
|
|
|
|||
Loading…
Reference in a new issue