zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Remove trailing whitespace

Browse source
This commit is contained in:
Scott Lahteine 2019-03-25 20:51:38 -05:00
parent 7462fe3068
commit d2e0c03afb
74 changed files with 370 additions and 370 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Marlin/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/default/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Anet/A2/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Anet/A6/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Anet/A8/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/ArmEd/Configuration_adv.h
View file

@ -408,20 +408,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Cartesio/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Creality/CR-10_5S/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Creality/CR-10mini/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Creality/Ender-3/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Einstart-S/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Felix/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Formbot/Raptor/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View file

@ -408,20 +408,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Formbot/T_Rex_3/Configuration_adv.h
View file

@ -408,20 +408,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Geeetech/A10M/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Geeetech/A20M/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Geeetech/MeCreator2/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Infitary/i3-M508/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/JGAurora/A5/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/MakerParts/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Malyan/M150/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Malyan/M200/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Micromake/C1/enhanced/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Mks/Robin/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Mks/Sbase/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/RapideLite/RL200/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/RigidBot/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/SCARA/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Sanguinololu/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/TheBorg/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/TinyBoy2/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Tronxy/X3A/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Tronxy/X5S-2E/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/UltiMachine/Archim1/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/UltiMachine/Archim2/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/VORONDesign/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Velleman/K8200/Configuration_adv.h
View file

@ -417,20 +417,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Velleman/K8400/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/WASP/PowerWASP/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/delta/FLSUN/kossel/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/delta/MKS/SBASE/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/delta/Tevo Little Monster/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/delta/generic/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/delta/kossel_mini/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/delta/kossel_xl/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/makibox/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/tvrrug/Round2/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and

10
config/examples/wt150/Configuration_adv.h
View file

@ -404,20 +404,20 @@
* The inactive carriage is parked automatically to prevent oozing. * The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board. * By default the X2 stepper is assigned to the first unused E plug on the board.
* *
* The following Dual X Carriage modes can be selected with M605 S<mode>: * The following Dual X Carriage modes can be selected with M605 S<mode>:
* *
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0) * results as long as it supports dual X-carriages. (M605 S0)
* *
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1) * that additional slicer support is not required. (M605 S1)
* *
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement. * follow with M605 S2 to initiate duplicated movement.
* *
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis. * the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and