From d2f20803baa05874e374c5eefd8f124acd3d97fe Mon Sep 17 00:00:00 2001 From: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Sun, 14 Jul 2019 07:58:53 -0400 Subject: [PATCH] Allow nozzle clean with limited Axis (#14619) --- Marlin/Configuration.h | 5 ++- Marlin/src/gcode/feature/clean/G12.cpp | 16 ++++++++-- Marlin/src/libs/nozzle.cpp | 32 +++++++++++++++---- Marlin/src/libs/nozzle.h | 2 +- config/default/Configuration.h | 5 ++- .../examples/3DFabXYZ/Migbot/Configuration.h | 5 ++- .../AlephObjects/TAZ4/Configuration.h | 5 ++- .../AliExpress/CL-260/Configuration.h | 5 ++- .../AliExpress/UM2pExt/Configuration.h | 5 ++- config/examples/Anet/A2/Configuration.h | 5 ++- config/examples/Anet/A2plus/Configuration.h | 5 ++- config/examples/Anet/A6/Configuration.h | 5 ++- config/examples/Anet/A8/Configuration.h | 5 ++- config/examples/Anet/A8plus/Configuration.h | 5 ++- config/examples/Anet/E16/Configuration.h | 5 ++- config/examples/AnyCubic/i3/Configuration.h | 5 ++- config/examples/ArmEd/Configuration.h | 5 ++- config/examples/Azteeg/X5GT/Configuration.h | 5 ++- .../BIBO/TouchX/cyclops/Configuration.h | 5 ++- .../BIBO/TouchX/default/Configuration.h | 5 ++- config/examples/BQ/Hephestos/Configuration.h | 5 ++- .../examples/BQ/Hephestos_2/Configuration.h | 5 ++- config/examples/BQ/WITBOX/Configuration.h | 5 ++- config/examples/Cartesio/Configuration.h | 5 ++- .../examples/Creality/CR-10/Configuration.h | 5 ++- .../examples/Creality/CR-10S/Configuration.h | 5 ++- .../Creality/CR-10_5S/Configuration.h | 5 ++- .../Creality/CR-10mini/Configuration.h | 5 ++- .../Creality/CR-20 Pro/Configuration.h | 5 ++- .../examples/Creality/CR-20/Configuration.h | 5 ++- config/examples/Creality/CR-8/Configuration.h | 5 ++- .../examples/Creality/Ender-2/Configuration.h | 5 ++- .../examples/Creality/Ender-3/Configuration.h | 5 ++- .../examples/Creality/Ender-4/Configuration.h | 5 ++- .../examples/Creality/Ender-5/Configuration.h | 5 ++- .../Dagoma/Disco Ultimate/Configuration.h | 5 ++- .../Sidewinder X1/Configuration.h | 5 ++- config/examples/Einstart-S/Configuration.h | 5 ++- config/examples/Felix/Configuration.h | 5 ++- config/examples/Felix/DUAL/Configuration.h | 5 ++- .../FlashForge/CreatorPro/Configuration.h | 5 ++- .../FolgerTech/i3-2020/Configuration.h | 5 ++- .../examples/Formbot/Raptor/Configuration.h | 5 ++- .../examples/Formbot/T_Rex_2+/Configuration.h | 5 ++- .../examples/Formbot/T_Rex_3/Configuration.h | 5 ++- config/examples/Fysetc/AIO_II/Configuration.h | 5 ++- .../examples/Fysetc/CHEETAH/Configuration.h | 5 ++- config/examples/Fysetc/F6_13/Configuration.h | 5 ++- config/examples/Geeetech/A10/Configuration.h | 5 ++- config/examples/Geeetech/A10M/Configuration.h | 5 ++- config/examples/Geeetech/A20M/Configuration.h | 5 ++- .../examples/Geeetech/GT2560/Configuration.h | 5 ++- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 5 ++- .../Geeetech/MeCreator2/Configuration.h | 5 ++- .../Prusa i3 Pro B/bltouch/Configuration.h | 5 ++- .../Prusa i3 Pro B/noprobe/Configuration.h | 5 ++- .../Geeetech/Prusa i3 Pro C/Configuration.h | 5 ++- .../Geeetech/Prusa i3 Pro W/Configuration.h | 5 ++- .../examples/Infitary/i3-M508/Configuration.h | 5 ++- config/examples/JGAurora/A1/Configuration.h | 5 ++- config/examples/JGAurora/A5/Configuration.h | 5 ++- config/examples/JGAurora/A5S/Configuration.h | 5 ++- config/examples/MakerParts/Configuration.h | 5 ++- config/examples/Malyan/M150/Configuration.h | 5 ++- config/examples/Malyan/M200/Configuration.h | 5 ++- .../Micromake/C1/basic/Configuration.h | 5 ++- .../Micromake/C1/enhanced/Configuration.h | 5 ++- config/examples/Mks/Robin/Configuration.h | 5 ++- config/examples/Mks/Sbase/Configuration.h | 5 ++- .../Printrbot/PrintrboardG2/Configuration.h | 5 ++- .../examples/RapideLite/RL200/Configuration.h | 5 ++- .../examples/RepRapPro/Huxley/Configuration.h | 5 ++- .../RepRapWorld/Megatronics/Configuration.h | 5 ++- config/examples/RigidBot/Configuration.h | 5 ++- config/examples/SCARA/Configuration.h | 5 ++- .../STM32/Black_STM32F407VET6/Configuration.h | 5 ++- .../examples/STM32/STM32F10/Configuration.h | 5 ++- config/examples/STM32/STM32F4/Configuration.h | 5 ++- .../STM32/stm32f103ret6/Configuration.h | 5 ++- config/examples/Sanguinololu/Configuration.h | 5 ++- .../Tevo/Tarantula Pro/Configuration.h | 5 ++- config/examples/TheBorg/Configuration.h | 5 ++- config/examples/TinyBoy2/Configuration.h | 5 ++- config/examples/Tronxy/X1/Configuration.h | 5 ++- config/examples/Tronxy/X3A/Configuration.h | 5 ++- config/examples/Tronxy/X5S-2E/Configuration.h | 5 ++- config/examples/Tronxy/X5S/Configuration.h | 5 ++- config/examples/Tronxy/XY100/Configuration.h | 5 ++- .../UltiMachine/Archim1/Configuration.h | 5 ++- .../UltiMachine/Archim2/Configuration.h | 5 ++- config/examples/VORONDesign/Configuration.h | 5 ++- .../examples/Velleman/K8200/Configuration.h | 5 ++- .../examples/Velleman/K8400/Configuration.h | 5 ++- .../Velleman/K8400/Dual-head/Configuration.h | 5 ++- .../examples/WASP/PowerWASP/Configuration.h | 5 ++- .../Wanhao/Duplicator 6/Configuration.h | 5 ++- .../Wanhao/Duplicator i3 Mini/Configuration.h | 5 ++- .../examples/adafruit/ST7565/Configuration.h | 5 ++- .../delta/Anycubic/Kossel/Configuration.h | 5 ++- .../FLSUN/auto_calibrate/Configuration.h | 5 ++- .../delta/FLSUN/kossel/Configuration.h | 5 ++- .../delta/FLSUN/kossel_mini/Configuration.h | 5 ++- .../Geeetech/Rostock 301/Configuration.h | 5 ++- .../delta/Hatchbox_Alpha/Configuration.h | 5 ++- .../examples/delta/MKS/SBASE/Configuration.h | 5 ++- .../delta/Tevo Little Monster/Configuration.h | 5 ++- config/examples/delta/generic/Configuration.h | 5 ++- .../delta/kossel_mini/Configuration.h | 5 ++- .../examples/delta/kossel_pro/Configuration.h | 5 ++- .../examples/delta/kossel_xl/Configuration.h | 5 ++- .../examples/gCreate/gMax1.5+/Configuration.h | 5 ++- config/examples/makibox/Configuration.h | 5 ++- config/examples/tvrrug/Round2/Configuration.h | 5 ++- config/examples/wt150/Configuration.h | 5 ++- 114 files changed, 483 insertions(+), 122 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 6880d7bbea..bcecca1dca 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/Marlin/src/gcode/feature/clean/G12.cpp b/Marlin/src/gcode/feature/clean/G12.cpp index d0aa0c16ed..c831f1fbfc 100644 --- a/Marlin/src/gcode/feature/clean/G12.cpp +++ b/Marlin/src/gcode/feature/clean/G12.cpp @@ -42,6 +42,16 @@ void GcodeSuite::G12() { // Don't allow nozzle cleaning without homing first if (axis_unhomed_error()) return; + const bool seenxyz = parser.seen("XYZ"), + clean_x = !seenxyz || parser.boolval('X'), + clean_y = !seenxyz || parser.boolval('Y'); + + #if ENABLED(NOZZLE_CLEAN_NO_Z) + static constexpr bool clean_z = false; + #else + const bool clean_z = !seenxyz || parser.boolval('Z'); + #endif + const uint8_t pattern = parser.ushortval('P', 0), strokes = parser.ushortval('S', NOZZLE_CLEAN_STROKES), objects = parser.ushortval('T', NOZZLE_CLEAN_TRIANGLES); @@ -49,14 +59,14 @@ void GcodeSuite::G12() { #if HAS_LEVELING const bool was_enabled = planner.leveling_active; - set_bed_leveling_enabled(false); + if (clean_z) set_bed_leveling_enabled(false); #endif - Nozzle::clean(pattern, strokes, radius, objects); + Nozzle::clean(pattern, strokes, radius, objects, clean_x, clean_y, clean_z); // Re-enable bed level correction if it had been on #if HAS_LEVELING - set_bed_leveling_enabled(was_enabled); + if (clean_z) set_bed_leveling_enabled(was_enabled); #endif } diff --git a/Marlin/src/libs/nozzle.cpp b/Marlin/src/libs/nozzle.cpp index 336f189e23..27c214b876 100644 --- a/Marlin/src/libs/nozzle.cpp +++ b/Marlin/src/libs/nozzle.cpp @@ -46,7 +46,11 @@ #endif // Move to the starting point - do_blocking_move_to(start.x, start.y, start.z); + #if ENABLED(NOZZLE_CLEAN_NO_Z) + do_blocking_move_to_xy(start.x, start.y); + #else + do_blocking_move_to(start.x, start.y, start.z); + #endif // Start the stroke pattern for (uint8_t i = 0; i < (strokes >> 1); i++) { @@ -76,7 +80,11 @@ const float ix = current_position[X_AXIS], iy = current_position[Y_AXIS], iz = current_position[Z_AXIS]; #endif - do_blocking_move_to(start.x, start.y, start.z); + #if ENABLED(NOZZLE_CLEAN_NO_Z) + do_blocking_move_to_xy(start.x, start.y); + #else + do_blocking_move_to(start.x, start.y, start.z); + #endif const uint8_t zigs = objects << 1; const bool horiz = ABS(diffx) >= ABS(diffy); // Do a horizontal wipe? @@ -119,7 +127,11 @@ const float ix = current_position[X_AXIS], iy = current_position[Y_AXIS], iz = current_position[Z_AXIS]; #endif - do_blocking_move_to(start.x, start.y, start.z); + #if ENABLED(NOZZLE_CLEAN_NO_Z) + do_blocking_move_to_xy(start.x, start.y); + #else + do_blocking_move_to(start.x, start.y, start.z); + #endif for (uint8_t s = 0; s < strokes; s++) for (uint8_t i = 0; i < NOZZLE_CLEAN_CIRCLE_FN; i++) @@ -143,7 +155,13 @@ * @param pattern one of the available patterns * @param argument depends on the cleaning pattern */ - void Nozzle::clean(const uint8_t &pattern, const uint8_t &strokes, const float &radius, const uint8_t &objects/*=0*/) { + void Nozzle::clean(const uint8_t &pattern, const uint8_t &strokes, const float &radius, const uint8_t &objects, const bool clean_x, const bool clean_y, const bool clean_z) { + point_t start = NOZZLE_CLEAN_START_POINT; + point_t end = NOZZLE_CLEAN_END_POINT; + if (!clean_x) start.x = end.x = current_position[X_AXIS]; + if (!clean_y) start.y = end.y = current_position[Y_AXIS]; + if (!clean_z) start.z = end.z = current_position[Z_AXIS]; + switch (pattern) { case 1: zigzag(NOZZLE_CLEAN_START_POINT, NOZZLE_CLEAN_END_POINT, strokes, objects); @@ -162,9 +180,9 @@ #if ENABLED(NOZZLE_PARK_FEATURE) - void Nozzle::park(const uint8_t z_action, const point_t &park /*= NOZZLE_PARK_POINT*/) { - const float fr_xy = NOZZLE_PARK_XY_FEEDRATE; - const float fr_z = NOZZLE_PARK_Z_FEEDRATE; + void Nozzle::park(const uint8_t z_action, const point_t &park/*=NOZZLE_PARK_POINT*/) { + const float fr_xy = NOZZLE_PARK_XY_FEEDRATE, + fr_z = NOZZLE_PARK_Z_FEEDRATE; switch (z_action) { case 1: // Go to Z-park height diff --git a/Marlin/src/libs/nozzle.h b/Marlin/src/libs/nozzle.h index ad0d8d752d..dc8513f28b 100644 --- a/Marlin/src/libs/nozzle.h +++ b/Marlin/src/libs/nozzle.h @@ -78,7 +78,7 @@ class Nozzle { * @param pattern one of the available patterns * @param argument depends on the cleaning pattern */ - static void clean(const uint8_t &pattern, const uint8_t &strokes, const float &radius, const uint8_t &objects=0) _Os; + static void clean(const uint8_t &pattern, const uint8_t &strokes, const float &radius, const uint8_t &objects, const bool clean_x, const bool clean_y, const bool clean_z) _Os; #endif // NOZZLE_CLEAN_FEATURE diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 6880d7bbea..bcecca1dca 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 65a26ed0cb..2792e760ce 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -1553,8 +1553,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index 205509942e..aa4f1e3e77 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -1542,8 +1542,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 26eac786b2..f7490b9f6a 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 96aa4eff71..ecff552b6a 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -1533,8 +1533,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 8d3536bb65..c27d394a71 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index b5bff71183..c8047e9ac8 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index ccef170d2b..e45372310a 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -1673,8 +1673,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 6b3d197948..065f27e265 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -1535,8 +1535,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 9e1d2f09ca..07ee5ae790 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -1533,8 +1533,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h index 025d90598e..b28b22e181 100644 --- a/config/examples/Anet/E16/Configuration.h +++ b/config/examples/Anet/E16/Configuration.h @@ -1534,8 +1534,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 059af525f4..dfeefa3020 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -1532,8 +1532,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 8636e61503..58d8a24463 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -1523,8 +1523,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 761215f194..7081675874 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 909668e506..d18d546eb6 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 772e2f9d56..9ae7ac0cf7 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index e10fd5ef8c..63e24434ce 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -1510,8 +1510,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 6f85763333..f2cf70294b 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 95e8115f26..8f1d81e0c8 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -1510,8 +1510,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 31dc5af3c9..86875b5bae 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -1521,8 +1521,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h index 731ada1495..d6a4e4d02c 100644 --- a/config/examples/Creality/CR-10/Configuration.h +++ b/config/examples/Creality/CR-10/Configuration.h @@ -1532,8 +1532,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h index 202b2c9b95..edbf8f826c 100644 --- a/config/examples/Creality/CR-10S/Configuration.h +++ b/config/examples/Creality/CR-10S/Configuration.h @@ -1523,8 +1523,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h index f796aa3e0f..eff6b12f17 100644 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ b/config/examples/Creality/CR-10_5S/Configuration.h @@ -1525,8 +1525,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h index bbdfc548bf..0a56067e31 100644 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ b/config/examples/Creality/CR-10mini/Configuration.h @@ -1541,8 +1541,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 953efe9c8d..be6d35ee3c 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -1519,8 +1519,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 4c06cbb6a1..f5e7b7c4fd 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -1519,8 +1519,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index b8dba2df67..d323a9b2f5 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -1532,8 +1532,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 0e4f793330..9c211dbe94 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -1526,8 +1526,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h index 6a08c072b6..4cf8a07862 100644 --- a/config/examples/Creality/Ender-3/Configuration.h +++ b/config/examples/Creality/Ender-3/Configuration.h @@ -1526,8 +1526,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index d515852694..39856a898b 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -1532,8 +1532,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h index a86a9708e5..7f9f9ec60c 100644 --- a/config/examples/Creality/Ender-5/Configuration.h +++ b/config/examples/Creality/Ender-5/Configuration.h @@ -1519,8 +1519,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 1ebb50b07d..25891fff32 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h index 706089fb4f..244ead3942 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h @@ -1527,8 +1527,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 29374fa144..f5e13f11cf 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -1532,8 +1532,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h index b6d53dbbb9..6518bda9d7 100644 --- a/config/examples/Felix/Configuration.h +++ b/config/examples/Felix/Configuration.h @@ -1504,8 +1504,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index f801c2a48d..7c4831468a 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -1504,8 +1504,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 94df54f5c7..ddd643667b 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -1513,8 +1513,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index c8f3bfe9d2..67eef9c93c 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1528,8 +1528,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index a403e606d9..a9829a8244 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1627,8 +1627,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index a199072368..e5529b17f7 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -1556,8 +1556,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 423151fa80..fe6c03b791 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -1547,8 +1547,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Fysetc/AIO_II/Configuration.h b/config/examples/Fysetc/AIO_II/Configuration.h index 92d43b0ab7..402d5c7f95 100644 --- a/config/examples/Fysetc/AIO_II/Configuration.h +++ b/config/examples/Fysetc/AIO_II/Configuration.h @@ -1516,8 +1516,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Fysetc/CHEETAH/Configuration.h b/config/examples/Fysetc/CHEETAH/Configuration.h index 27a2cc2994..e2a907447b 100644 --- a/config/examples/Fysetc/CHEETAH/Configuration.h +++ b/config/examples/Fysetc/CHEETAH/Configuration.h @@ -1516,8 +1516,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Fysetc/F6_13/Configuration.h b/config/examples/Fysetc/F6_13/Configuration.h index d147620b64..4c90aaa7fd 100644 --- a/config/examples/Fysetc/F6_13/Configuration.h +++ b/config/examples/Fysetc/F6_13/Configuration.h @@ -1518,8 +1518,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index c9f1eef867..4a95c318a6 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -1507,8 +1507,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index f07f45bffc..27bce2d79b 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -1507,8 +1507,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 4187dacd78..dd619d4274 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -1506,8 +1506,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 62526163e4..654d734626 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -1537,8 +1537,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index c6131536f4..a3988d348e 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 55b4a33265..193c93ec28 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -1529,8 +1529,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 96e613e439..7148acd47d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1543,8 +1543,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 12d7279197..865caf7a8e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1542,8 +1542,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 504e34fd16..7b2184ad2d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 0b74d2877a..36b88e644b 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index ef6f904956..a6ec0994c7 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -1526,8 +1526,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 9a1b3c205d..127671feb4 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -1518,8 +1518,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 38d35512a1..d4d70ebbc8 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -1534,8 +1534,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 440f91122a..b086d72bb7 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -1518,8 +1518,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 4553972145..a37aff9a50 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -1542,8 +1542,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 21360a837c..8aa6f8cc60 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -1550,8 +1550,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index d4dde8e9a2..7fc5851800 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -1521,8 +1521,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index f9323f729a..b61fb46c36 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -1526,8 +1526,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 7cfb056972..2cbfe8fcc6 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1526,8 +1526,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 6665f5a356..958535d4f1 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -1523,8 +1523,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index aadd430991..55b11f0206 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index e8d45a23b7..1639f71068 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -1530,8 +1530,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 9ff0757a9e..8dd46c6abe 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 0f25160b4c..642a820fcf 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -1571,8 +1571,11 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index f6fc590759..894ed01ad5 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 69de1a747c..aeec7a0b7e 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -1520,8 +1520,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h index a32290b9ee..faf11620f4 100644 --- a/config/examples/SCARA/Configuration.h +++ b/config/examples/SCARA/Configuration.h @@ -1531,8 +1531,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 26c2382aac..25aa7ca945 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h index 8a8892e8c2..4a010c099e 100644 --- a/config/examples/STM32/STM32F10/Configuration.h +++ b/config/examples/STM32/STM32F10/Configuration.h @@ -1524,8 +1524,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 38570dd24e..f03379f56d 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h index b5143c51fc..b027e887ed 100644 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ b/config/examples/STM32/stm32f103ret6/Configuration.h @@ -1524,8 +1524,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 1481a21fb8..df1b39c999 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -1553,8 +1553,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 7887d48983..d6ebcda8d7 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -1514,8 +1514,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 1ab52ef2fc..4f4c56774b 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 198e7db5cf..f778ea9742 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -1578,8 +1578,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 37a55c7f56..5ba2648e53 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 14123ed127..a1348957f2 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -1526,8 +1526,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 204af78003..faab4c028c 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -1543,8 +1543,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 789becec22..0f4c580867 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 3cb2ed18b6..f38990ec56 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -1533,8 +1533,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 8d0b3736ca..d836a170d0 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 73fe0f940e..8071a35e22 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 60eee38596..c718d985ed 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -1531,8 +1531,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 048d81da78..440306ab28 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -1552,8 +1552,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h index c9b3f700ef..edf8cf508b 100644 --- a/config/examples/Velleman/K8400/Configuration.h +++ b/config/examples/Velleman/K8400/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index b01d0627bb..584a48111d 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 71380f1abd..b70d4e95bb 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -1541,8 +1541,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 82806cb83c..9f69e747fd 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1532,8 +1532,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index ce28558294..5dcb4b1465 100755 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index 0abe473002..a91e0d7ed5 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -1522,8 +1522,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index e94a309ae4..51ef29aab2 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1710,8 +1710,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index eb35ec3410..699e570292 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1650,8 +1650,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 32cb149a91..fddf025086 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1649,8 +1649,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 1d8d292545..633b25f94f 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1649,8 +1649,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index ca55a6a8e1..d26b7ea4c0 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1637,8 +1637,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 4cb0cfa186..aac5cdd921 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1652,8 +1652,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index df0651242c..48347dc237 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1637,8 +1637,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index c2faf384c5..55d790469e 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1641,8 +1641,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 5bd8dd3c3a..8b145146fe 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1637,8 +1637,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 3e7b3429b5..da073bd6f2 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1639,8 +1639,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index ddcc90cbbc..cc9a1fc23a 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1640,8 +1640,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index dfde4098bc..35a9473109 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1640,8 +1640,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index d04f5b0259..dd87d1c7ac 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1536,8 +1536,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index f8ecfa87f3..ab93548f4c 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -1525,8 +1525,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 56d1ff36b9..dbc75f9111 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -1517,8 +1517,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /** diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h index c2b1e18bf7..ca29af8ff6 100644 --- a/config/examples/wt150/Configuration.h +++ b/config/examples/wt150/Configuration.h @@ -1527,8 +1527,11 @@ // Middle point of circle #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position + // Move the nozzle to the initial position after cleaning #define NOZZLE_CLEAN_GOBACK + + // Enable for a purge/clean station that's always at the gantry height (thus no Z move) + //#define NOZZLE_CLEAN_NO_Z #endif /**