diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index b71b8f8143..f3a4b7f47e 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp index fe4ceb1263..b1654cd23b 100644 --- a/Marlin/src/Marlin.cpp +++ b/Marlin/src/Marlin.cpp @@ -536,7 +536,7 @@ void idle( ) { #if ENABLED(MAX7219_DEBUG) Max7219_idle_tasks(); - #endif // MAX7219_DEBUG + #endif lcd_update(); diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index b71b8f8143..f3a4b7f47e 100644 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index fb36d26e7e..78862f4a9e 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index 439f03913c..0cdc3b0923 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 08f7687578..5a06ca0611 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h index b71b8f8143..f3a4b7f47e 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 2ff3cfa7be..c4b938bf66 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h index 1362f82e42..7bfab90ddc 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index 7ab8165aa7..ad8a92605e 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index 47039a4bb2..d9a850e36b 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1670,27 +1670,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index 7ab8165aa7..ad8a92605e 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index d74de476a8..c85e2d9c58 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 07031af3a4..4a810e3b3b 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -1665,27 +1665,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index 1094c26ce9..f04b19d960 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h index c72409e09f..ca6b97c006 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h index 08915e78ce..02b40beefe 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h index 11be9fa1d7..f83add0e47 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h index c0b77b06ba..1cc916d5de 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h index 08915e78ce..02b40beefe 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index f47f0acb95..00ab7db363 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 9e588a8da1..aa1dd3d329 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1662,11 +1662,8 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ #define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) @@ -1682,15 +1679,19 @@ //#define MAX7219_DIN_PIN P2_13 // for RAMPS E1 on Re-ARM E1_DIR_PIN P2_13 //#define MAX7219_LOAD_PIN P2_08 // for RAMPS E1 on Re-ARM E1_STEP_PIN P2_08 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index b7f7719cdf..5e18375ae6 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index b7f7719cdf..5e18375ae6 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index 2ac0bd2d69..70f957ca54 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index 7571708e39..a71eab4072 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index 374e5e3439..538f637b33 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index bf87a70d7e..cd97fedf99 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index 21d5185c32..0324882a4a 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index caa3324aca..3166336ade 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index 9acb66be07..ee8ab05db7 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -1670,27 +1670,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index 4e023f2168..3da6611f04 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index d7cfc7758e..59351c734c 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index 35b458eec8..5f3b3a50cb 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index 813cfd3636..d7bdbcd4f8 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -1663,27 +1663,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index b90721ade1..b5dc6bd095 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index 6481a3c42f..1e50c0178e 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index b520e31312..6f8deff9e8 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -1665,27 +1665,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index 22ba7b0c63..3ca8f2999a 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 4ce2ffd0f8..16d547804f 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1664,27 +1664,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index c0a70a2ced..5f2f0e5df9 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1664,27 +1664,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 55b3e00835..ef518d9be9 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1664,27 +1664,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 26d30af591..79d016523e 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1664,27 +1664,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index 26d30af591..79d016523e 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -1664,27 +1664,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index 26d30af591..79d016523e 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1664,27 +1664,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h index 3b47fffafc..449b9e2516 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h @@ -1669,27 +1669,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 052c584927..a25bc32e59 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1664,27 +1664,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index b37db2f7b8..f0520426d2 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ #define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index 57a2ff1e09..8e8bb7bc18 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index 9a63f5af85..348dec0e14 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1662,27 +1662,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index d1c8c0666f..09d2229ef4 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -1663,27 +1663,28 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif diff --git a/Marlin/src/feature/Max7219_Debug_LEDs.cpp b/Marlin/src/feature/Max7219_Debug_LEDs.cpp index 8403f3c18b..1291aebdc8 100644 --- a/Marlin/src/feature/Max7219_Debug_LEDs.cpp +++ b/Marlin/src/feature/Max7219_Debug_LEDs.cpp @@ -22,11 +22,9 @@ /** * This module is off by default, but can be enabled to facilitate the display of - * extra debug information during code development. It assumes the existence of a - * Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this: - * http://www.ebay.com/itm/191781645249 for under $2.00 including shipping. + * extra debug information during code development. * - * Just connect up +5v and GND to give it power, then connect up the pins assigned + * Just connect up 5V and GND to give it power, then connect up the pins assigned * in Configuration_adv.h. For example, on the Re-ARM you could use: * * #define MAX7219_CLK_PIN 77 @@ -35,26 +33,14 @@ * * Max7219_init() is called automatically at startup, and then there are a number of * support functions available to control the LEDs in the 8x8 grid. - * - * void Max7219_init(); - * void Max7219_PutByte(uint8_t data); - * void Max7219(uint8_t reg, uint8_t data); - * void Max7219_LED_On(uint8_t col, uint8_t row); - * void Max7219_LED_Off(uint8_t col, uint8_t row); - * void Max7219_LED_Toggle(uint8_t col, uint8_t row); - * void Max7219_Clear_Row(uint8_t row); - * void Max7219_Clear_Column(uint8_t col); - * void Max7219_Set_Row(uint8_t row, uint8_t val); - * void Max7219_Set_2_Rows(uint8_t row, uint16_t val); - * void Max7219_Set_4_Rows(uint8_t row, uint32_t val); - * void Max7219_Set_Column(uint8_t col, uint8_t val); - * void Max7219_idle_tasks(); */ -#include "../inc/MarlinConfig.h" +#include "../inc/MarlinConfigPre.h" #if ENABLED(MAX7219_DEBUG) +#define MAX7219_ERRORS // Disable to save 406 bytes of Program Memory + #include "Max7219_Debug_LEDs.h" #include "../module/planner.h" @@ -64,6 +50,38 @@ static uint8_t LEDs[8] = { 0 }; +#ifndef MAX7219_ROTATE + #define MAX7219_ROTATE 0 +#endif +#define _ROT ((MAX7219_ROTATE + 360) % 360) +#if _ROT == 0 + #define _ROW_ y + #define _COL_ x + #define XOR_7219(x, y) LEDs[y] ^= _BV(7 - x) + #define BIT_7219(x, y) TEST(LEDs[y], 7 - x) + #define SEND_7219(R,V) Max7219(max7219_reg_digit0 + R, V) +#elif _ROT == 90 + #define _ROW_ x + #define _COL_ y + #define XOR_7219(x, y) LEDs[x] ^= _BV(y) + #define BIT_7219(x, y) TEST(LEDs[x], y) + #define SEND_7219(R,V) Max7219(max7219_reg_digit0 + R, V) +#elif _ROT == 180 + #define _ROW_ y + #define _COL_ x + #define XOR_7219(x, y) LEDs[y] ^= _BV(x) + #define BIT_7219(x, y) TEST(LEDs[y], x) + #define SEND_7219(R,V) Max7219(max7219_reg_digit7 - R, V) +#elif _ROT == 270 + #define _ROW_ x + #define _COL_ y + #define XOR_7219(x, y) LEDs[x] ^= _BV(7 - y) + #define BIT_7219(x, y) TEST(LEDs[x], 7 - y) + #define SEND_7219(R,V) Max7219(max7219_reg_digit7 - R, V) +#else + #error "MAX7219_ROTATE must be a multiple of +/- 90°." +#endif + #ifdef CPU_32_BIT // Approximate a 1µs delay on 32-bit ARM #define SIG_DELAY() DELAY_US(1) @@ -73,6 +91,9 @@ static uint8_t LEDs[8] = { 0 }; #endif void Max7219_PutByte(uint8_t data) { + #ifndef CPU_32_BIT + CRITICAL_SECTION_START; + #endif for (uint8_t i = 8; i--;) { SIG_DELAY(); WRITE(MAX7219_CLK_PIN, LOW); // tick @@ -83,10 +104,16 @@ void Max7219_PutByte(uint8_t data) { SIG_DELAY(); data <<= 1; } + #ifndef CPU_32_BIT + CRITICAL_SECTION_END; + #endif } void Max7219(const uint8_t reg, const uint8_t data) { SIG_DELAY(); + #ifndef CPU_32_BIT + CRITICAL_SECTION_START; + #endif WRITE(MAX7219_LOAD_PIN, LOW); // begin SIG_DELAY(); Max7219_PutByte(reg); // specify register @@ -96,125 +123,168 @@ void Max7219(const uint8_t reg, const uint8_t data) { WRITE(MAX7219_LOAD_PIN, LOW); // and tell the chip to load the data SIG_DELAY(); WRITE(MAX7219_LOAD_PIN, HIGH); + #ifndef CPU_32_BIT + CRITICAL_SECTION_END; + #endif SIG_DELAY(); } -void Max7219_LED_Set(const uint8_t col, const uint8_t row, const bool on) { - if (row > 7 || col > 7) { - SERIAL_ECHOPAIR("??? Max7219_LED_Set(", (int)row); - SERIAL_ECHOPAIR(",", (int)col); - SERIAL_ECHOLNPGM(")"); - return; +#if ENABLED(MAX7219_NUMERIC) + + // Draw an integer with optional leading zeros and optional decimal point + void Max7219_Print(const uint8_t start, int16_t value, uint8_t size, const bool leadzero=false, bool dec=false) { + constexpr uint8_t led_numeral[10] = { 0x7E, 0x60, 0x6D, 0x79, 0x63, 0x5B, 0x5F, 0x70, 0x7F, 0x7A }, + led_decimal = 0x80, led_minus = 0x01; + + bool blank = false, neg = value < 0; + if (neg) value *= -1; + while (size--) { + const bool minus = neg && blank; + if (minus) neg = false; + Max7219( + max7219_reg_digit0 + start + size, + minus ? led_minus : blank ? 0x00 : led_numeral[value % 10] | (dec ? led_decimal : 0x00) + ); + value /= 10; + if (!value && !leadzero) blank = true; + dec = false; + } } - if (TEST(LEDs[col], row) == on) return; // if LED is already on/off, leave alone - if (on) SBI(LEDs[col], row); else CBI(LEDs[col], row); - Max7219(8 - col, LEDs[col]); + + // Draw a float with a decimal point and optional digits + void Max7219_Print(const uint8_t start, const float value, const uint8_t pre_size, const uint8_t post_size, const bool leadzero=false) { + if (pre_size) Max7219_Print(start, value, pre_size, leadzero, !!post_size); + if (post_size) { + const int16_t after = ABS(value) * (10 ^ post_size); + Max7219_Print(start + pre_size, after, post_size, true); + } + } + +#endif // MAX7219_NUMERIC + +inline void Max7219_Error(const char * const func, const int32_t v1, const int32_t v2=-1) { + #if ENABLED(MAX7219_ERRORS) + SERIAL_ECHOPGM("??? "); + serialprintPGM(func); + SERIAL_CHAR('('); + SERIAL_ECHO(v1); + if (v2 > 0) SERIAL_ECHOPAIR(", ", v2); + SERIAL_CHAR(')'); + SERIAL_EOL(); + #else + UNUSED(func); UNUSED(v1); UNUSED(v2); + #endif } -void Max7219_LED_On(const uint8_t col, const uint8_t row) { - if (row > 7 || col > 7) { - SERIAL_ECHOPAIR("??? Max7219_LED_On(", (int)col); - SERIAL_ECHOPAIR(",", (int)row); - SERIAL_ECHOLNPGM(")"); - return; - } - Max7219_LED_Set(col, row, true); +inline uint8_t flipped(const uint8_t bits) { + uint8_t outbits = 0; + for (uint8_t b = 0; b < 8; b++) + if (bits & _BV(b)) outbits |= _BV(7 - b); + return outbits; } -void Max7219_LED_Off(const uint8_t col, const uint8_t row) { - if (row > 7 || col > 7) { - SERIAL_ECHOPAIR("??? Max7219_LED_Off(", (int)row); - SERIAL_ECHOPAIR(",", (int)col); - SERIAL_ECHOLNPGM(")"); - return; - } - Max7219_LED_Set(col, row, false); +// Modify a single LED bit and send the changed line +void Max7219_LED_Set(const uint8_t x, const uint8_t y, const bool on) { + if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_Set"), x, y); + if (BIT_7219(x, y) == on) return; + XOR_7219(x, y); + SEND_7219(_ROW_, LEDs[_ROW_]); } -void Max7219_LED_Toggle(const uint8_t col, const uint8_t row) { - if (row > 7 || col > 7) { - SERIAL_ECHOPAIR("??? Max7219_LED_Toggle(", (int)row); - SERIAL_ECHOPAIR(",", (int)col); - SERIAL_ECHOLNPGM(")"); - return; - } - if (TEST(LEDs[row], col)) - Max7219_LED_Off(col, row); - else - Max7219_LED_On(col, row); +void Max7219_LED_On(const uint8_t x, const uint8_t y) { + if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_On"), x, y); + Max7219_LED_Set(x, y, true); } -void Max7219_Clear_Column(const uint8_t col) { - if (col > 7) { - SERIAL_ECHOPAIR("??? Max7219_Clear_Column(", (int)col); - SERIAL_ECHOLNPGM(")"); - return; - } - LEDs[col] = 0; - Max7219(8 - col, LEDs[col]); +void Max7219_LED_Off(const uint8_t x, const uint8_t y) { + if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_Off"), x, y); + Max7219_LED_Set(x, y, false); } -void Max7219_Clear_Row(const uint8_t row) { - if (row > 7) { - SERIAL_ECHOPAIR("??? Max7219_Clear_Row(", (int)row); - SERIAL_ECHOLNPGM(")"); - return; - } - for (uint8_t c = 0; c <= 7; c++) - Max7219_LED_Off(c, row); +void Max7219_LED_Toggle(const uint8_t x, const uint8_t y) { + if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_Toggle"), x, y); + Max7219_LED_Set(x, y, !BIT_7219(x, y)); } -void Max7219_Set_Row(const uint8_t row, const uint8_t val) { - if (row > 7) { - SERIAL_ECHOPAIR("??? Max7219_Set_Row(", (int)row); - SERIAL_ECHOPAIR(",", (int)val); - SERIAL_ECHOLNPGM(")"); - return; - } - for (uint8_t b = 0; b <= 7; b++) - if (TEST(val, b)) - Max7219_LED_On(7 - b, row); - else - Max7219_LED_Off(7 - b, row); +inline void _Max7219_Set_Reg(const uint8_t reg, const uint8_t val) { + LEDs[reg] = val; + SEND_7219(reg, val); } -void Max7219_Set_2_Rows(const uint8_t row, const uint16_t val) { - if (row > 6) { - SERIAL_ECHOPAIR("??? Max7219_Set_2_Rows(", (int)row); - SERIAL_ECHOPAIR(",", (int)val); - SERIAL_ECHOLNPGM(")"); - return; - } - Max7219_Set_Row(row + 1, (val >> 8) & 0xFF); - Max7219_Set_Row(row + 0, (val ) & 0xFF); +void Max7219_Set_Row(const uint8_t _ROW_, const uint8_t val) { + if (_ROW_ > 7) return Max7219_Error(PSTR("Max7219_Set_Row"), _ROW_); + #if _ROT == 90 + for (uint8_t _COL_ = 0; _COL_ <= 7; _COL_++) Max7219_LED_Set(7 - _COL_, _ROW_, TEST(val, _COL_)); + #elif _ROT == 180 + _Max7219_Set_Reg(_ROW_, flipped(val)); + #elif _ROT == 270 + for (uint8_t _COL_ = 0; _COL_ <= 7; _COL_++) Max7219_LED_Set(_COL_, _ROW_, TEST(val, _COL_)); + #else + _Max7219_Set_Reg(_ROW_, val); + #endif } -void Max7219_Set_4_Rows(const uint8_t row, const uint32_t val) { - if (row > 4) { - SERIAL_ECHOPAIR("??? Max7219_Set_4_Rows(", (int)row); - SERIAL_ECHOPAIR(",", (long)val); - SERIAL_ECHOLNPGM(")"); - return; - } - Max7219_Set_Row(row + 3, (val >> 24) & 0xFF); - Max7219_Set_Row(row + 2, (val >> 16) & 0xFF); - Max7219_Set_Row(row + 1, (val >> 8) & 0xFF); - Max7219_Set_Row(row + 0, (val ) & 0xFF); +void Max7219_Clear_Row(const uint8_t _ROW_) { + if (_ROW_ > 7) return Max7219_Error(PSTR("Max7219_Clear_Row"), _ROW_); + #if _ROT == 90 || _ROT == 270 + for (uint8_t _COL_ = 0; _COL_ <= 7; _COL_++) Max7219_LED_Off(_COL_, _ROW_); + #else + _Max7219_Set_Reg(_ROW_, 0); + #endif } -void Max7219_Set_Column(const uint8_t col, const uint8_t val) { - if (col > 7) { - SERIAL_ECHOPAIR("??? Max7219_Column(", (int)col); - SERIAL_ECHOPAIR(",", (int)val); - SERIAL_ECHOLNPGM(")"); - return; - } - LEDs[col] = val; - Max7219(8 - col, LEDs[col]); +void Max7219_Set_Column(const uint8_t _COL_, const uint8_t val) { + if (_COL_ > 7) return Max7219_Error(PSTR("Max7219_Set_Column"), _COL_); + #if _ROT == 90 + _Max7219_Set_Reg(_COL_, val); + #elif _ROT == 180 + for (uint8_t _ROW_ = 0; _ROW_ <= 7; _ROW_++) Max7219_LED_Set(_COL_, _ROW_, TEST(val, _ROW_)); + #elif _ROT == 270 + _Max7219_Set_Reg(_COL_, flipped(val)); + #else + for (uint8_t _ROW_ = 0; _ROW_ <= 7; _ROW_++) Max7219_LED_Set(_COL_, _ROW_, TEST(val, _ROW_)); + #endif +} + +void Max7219_Clear_Column(const uint8_t _COL_) { + if (_COL_ > 7) return Max7219_Error(PSTR("Max7219_Clear_Column"), _COL_); + #if _ROT == 90 || _ROT == 270 + _Max7219_Set_Reg(_COL_, 0); + #else + for (uint8_t _ROW_ = 0; _ROW_ <= 7; _ROW_++) Max7219_LED_Off(_COL_, _ROW_); + #endif +} + +void Max7219_Set_2_Rows(const uint8_t y, uint16_t val) { + if (y > 6) return Max7219_Error(PSTR("Max7219_Set_2_Rows"), y, val); + Max7219_Set_Row(y + 0, val & 0xFF); val >>= 8; + Max7219_Set_Row(y + 1, val & 0xFF); +} + +void Max7219_Set_4_Rows(const uint8_t y, uint32_t val) { + if (y > 4) return Max7219_Error(PSTR("Max7219_Set_4_Rows"), y, val); + Max7219_Set_Row(y + 0, val & 0xFF); val >>= 8; + Max7219_Set_Row(y + 1, val & 0xFF); val >>= 8; + Max7219_Set_Row(y + 2, val & 0xFF); val >>= 8; + Max7219_Set_Row(y + 3, val & 0xFF); +} + +void Max7219_Set_2_Columns(const uint8_t x, uint16_t val) { + if (x > 6) return Max7219_Error(PSTR("Max7219_Set_2_Columns"), x, val); + Max7219_Set_Column(x + 0, val & 0xFF); val >>= 8; + Max7219_Set_Column(x + 1, val & 0xFF); +} + +void Max7219_Set_4_Columns(const uint8_t x, uint32_t val) { + if (x > 4) return Max7219_Error(PSTR("Max7219_Set_4_Columns"), x, val); + Max7219_Set_Column(x + 0, val & 0xFF); val >>= 8; + Max7219_Set_Column(x + 1, val & 0xFF); val >>= 8; + Max7219_Set_Column(x + 2, val & 0xFF); val >>= 8; + Max7219_Set_Column(x + 3, val & 0xFF); } void Max7219_register_setup() { - //initiation of the max 7219 + // Initialize the Max7219 Max7219(max7219_reg_scanLimit, 0x07); Max7219(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits) Max7219(max7219_reg_shutdown, 0x01); // not in shutdown mode @@ -223,135 +293,173 @@ void Max7219_register_setup() { // range: 0x00 to 0x0F } -void Max7219_init() { - uint8_t i, x, y; +#ifdef MAX7219_INIT_TEST +#if (MAX7219_INIT_TEST + 0) == 2 + inline void Max7219_spiral(const bool on, const uint16_t del) { + constexpr int8_t way[] = { 1, 0, 0, 1, -1, 0, 0, -1 }; + int8_t px = 0, py = 0, dir = 0; + for (uint8_t i = 64; i--;) { + Max7219_LED_Set(px, py, on); + delay(del); + const int8_t x = px + way[dir], y = py + way[dir + 1]; + if (!WITHIN(x, 0, 7) || !WITHIN(y, 0, 7) || BIT_7219(x, y) == on) dir = (dir + 2) & 0x7; + px += way[dir]; py += way[dir + 1]; + } + } + +#else + + inline void Max7219_colset(const uint8_t x, const bool on) { + for (uint8_t y = 0; y <= 7; y++) Max7219_LED_Set(x, y, on); + } + inline void Max7219_sweep(const int8_t dir, const uint16_t ms, const bool on) { + uint8_t x = dir > 0 ? 0 : 7; + for (uint8_t i = 8; i--; x += dir) { + Max7219_Set_Column(x, on ? 0xFF : 0x00); + delay(ms); + } + } + +#endif +#endif // MAX7219_INIT_TEST + +void Max7219_init() { SET_OUTPUT(MAX7219_DIN_PIN); SET_OUTPUT(MAX7219_CLK_PIN); - OUT_WRITE(MAX7219_LOAD_PIN, HIGH); delay(1); Max7219_register_setup(); - for (i = 0; i <= 7; i++) { // empty registers, turn all LEDs off + for (uint8_t i = 0; i <= 7; i++) { // Empty registers to turn all LEDs off LEDs[i] = 0x00; - Max7219(i + 1, 0); + Max7219(max7219_reg_digit0 + i, 0); } - for (x = 0; x <= 7; x++) // Do an aesthetically pleasing pattern to fully test - for (y = 0; y <= 7; y++) { // the Max7219 module and LEDs. First, turn them - Max7219_LED_On(y, x); // all on. - delay(3); - } - - for (x = 0; x <= 7; x++) // Now, turn them all off. - for (y = 0; y <= 7; y++) { - Max7219_LED_Off(y, x); - delay(3); // delay() is OK here. Max7219_init() is only called from - } // setup() and nothing is running yet. - - delay(150); - - for (x = 8; x--;) // Now, do the same thing from the opposite direction - for (y = 0; y <= 7; y++) { - Max7219_LED_On(y, x); - delay(2); - } - - for (x = 8; x--;) - for (y = 0; y <= 7; y++) { - Max7219_LED_Off(y, x); - delay(2); - } + #ifdef MAX7219_INIT_TEST + #if (MAX7219_INIT_TEST + 0) == 2 + Max7219_spiral(true, 8); + delay(150); + Max7219_spiral(false, 8); + #else + // Do an aesthetically-pleasing pattern to fully test the Max7219 module and LEDs. + // Light up and turn off columns, both forward and backward. + Max7219_sweep(1, 20, true); + Max7219_sweep(1, 20, false); + delay(150); + Max7219_sweep(-1, 20, true); + Max7219_sweep(-1, 20, false); + #endif + #endif } /** - * These are sample debug features to demonstrate the usage of the 8x8 LED Matrix for debug purposes. - * There is very little CPU burden added to the system by displaying information within the idle() - * task. - * - * But with that said, if your debugging can be facilitated by making calls into the library from - * other places in the code, feel free to do it. The CPU burden for a few calls to toggle an LED - * or clear a row is not very significant. + * This code demonstrates some simple debugging using a single 8x8 LED Matrix. If your feature could + * benefit from matrix display, add its code here. Very little processing is required, so the 7219 is + * ideal for debugging when realtime feedback is important but serial output can't be used. */ + +// Apply changes to update a marker +inline void Max7219_Mark16(const uint8_t y, const uint8_t v1, const uint8_t v2) { + Max7219_LED_Off(v1 & 0x7, y + (v1 >= 8)); + Max7219_LED_On(v2 & 0x7, y + (v2 >= 8)); +} + +// Apply changes to update a tail-to-head range +inline void Max7219_Range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh) { + if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) + Max7219_LED_Off(n & 0x7, y + (n >= 8)); + if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) + Max7219_LED_On(n & 0x7, y + (n >= 8)); +} + +// Apply changes to update a quantity +inline void Max7219_Quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv) { + for (uint8_t i = MIN(nv, ov); i < MAX(nv, ov); i++) + Max7219_LED_Set(i >> 1, y + (i & 1), nv >= ov); +} + void Max7219_idle_tasks() { - #if MAX7219_DEBUG_STEPPER_HEAD || MAX7219_DEBUG_STEPPER_TAIL || MAX7219_DEBUG_STEPPER_QUEUE - CRITICAL_SECTION_START; - #if MAX7219_DEBUG_STEPPER_HEAD || MAX7219_DEBUG_STEPPER_QUEUE + #define MAX7219_USE_HEAD (defined(MAX7219_DEBUG_PLANNER_HEAD) || defined(MAX7219_DEBUG_PLANNER_QUEUE)) + #define MAX7219_USE_TAIL (defined(MAX7219_DEBUG_PLANNER_TAIL) || defined(MAX7219_DEBUG_PLANNER_QUEUE)) + #if MAX7219_USE_HEAD || MAX7219_USE_TAIL + #ifndef CPU_32_BIT + CRITICAL_SECTION_START; + #endif + #if MAX7219_USE_HEAD const uint8_t head = planner.block_buffer_head; #endif - #if MAX7219_DEBUG_STEPPER_TAIL || MAX7219_DEBUG_STEPPER_QUEUE + #if MAX7219_USE_TAIL const uint8_t tail = planner.block_buffer_tail; #endif - CRITICAL_SECTION_END; + #ifndef CPU_32_BIT + CRITICAL_SECTION_END; + #endif #endif - static uint16_t refresh_cnt = 0; // The Max7219 circuit boards available for several dollars on eBay - if (refresh_cnt++ > 50000) { // are vulnerable to electrical noise, especially with long wires - Max7219_register_setup(); // next to high current wires. If the display becomes corrupted due - Max7219_LED_Toggle(7, 0); // to electrical noise, this will fix it within a couple of seconds. + #if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE) + static uint8_t refresh_cnt; // = 0 + constexpr uint16_t refresh_limit = 5; + static millis_t next_blink = 0; + const millis_t ms = millis(); + const bool do_blink = ELAPSED(ms, next_blink); + #else + static uint16_t refresh_cnt; // = 0 + constexpr bool do_blink = true; + constexpr uint16_t refresh_limit = 50000; + #endif + + // Some Max7219 units are vulnerable to electrical noise, especially + // with long wires next to high current wires. If the display becomes + // corrupted, this will fix it within a couple seconds. + if (do_blink && ++refresh_cnt >= refresh_limit) { refresh_cnt = 0; + Max7219_register_setup(); } #if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE) - static millis_t next_blink = 0; - if (ELAPSED(millis(), next_blink)) { + if (do_blink) { Max7219_LED_Toggle(7, 7); - next_blink = millis() + 750; + next_blink = ms + 1000; } #endif - #ifdef MAX7219_DEBUG_STEPPER_HEAD - static int16_t last_head_cnt = 0; - if (last_head_cnt != head) { - if (last_head_cnt < 8) - Max7219_LED_Off(MAX7219_DEBUG_STEPPER_HEAD, last_head_cnt); - else - Max7219_LED_Off(MAX7219_DEBUG_STEPPER_HEAD + 1, last_head_cnt - 8); + #if defined(MAX7219_DEBUG_PLANNER_HEAD) && defined(MAX7219_DEBUG_PLANNER_TAIL) && MAX7219_DEBUG_PLANNER_HEAD == MAX7219_DEBUG_PLANNER_TAIL + static int16_t last_head_cnt = 0xF, last_tail_cnt = 0xF; + + if (last_head_cnt != head || last_tail_cnt != tail) { + Max7219_Range16(MAX7219_DEBUG_PLANNER_HEAD, last_tail_cnt, tail, last_head_cnt, head); last_head_cnt = head; - if (head < 8) - Max7219_LED_On(MAX7219_DEBUG_STEPPER_HEAD, head); - else - Max7219_LED_On(MAX7219_DEBUG_STEPPER_HEAD + 1, head - 8); - } - #endif - - #ifdef MAX7219_DEBUG_STEPPER_TAIL - static int16_t last_tail_cnt = 0; - if (last_tail_cnt != tail) { - if (last_tail_cnt < 8) - Max7219_LED_Off(MAX7219_DEBUG_STEPPER_TAIL, last_tail_cnt); - else - Max7219_LED_Off(MAX7219_DEBUG_STEPPER_TAIL + 1, last_tail_cnt - 8); - last_tail_cnt = tail; - if (tail < 8) - Max7219_LED_On(MAX7219_DEBUG_STEPPER_TAIL, tail); - else - Max7219_LED_On(MAX7219_DEBUG_STEPPER_TAIL + 1, tail - 8); } + + #else + + #ifdef MAX7219_DEBUG_PLANNER_HEAD + static int16_t last_head_cnt = 0x1; + if (last_head_cnt != head) { + Max7219_Mark16(MAX7219_DEBUG_PLANNER_HEAD, last_head_cnt, head); + last_head_cnt = head; + } + #endif + + #ifdef MAX7219_DEBUG_PLANNER_TAIL + static int16_t last_tail_cnt = 0x1; + if (last_tail_cnt != tail) { + Max7219_Mark16(MAX7219_DEBUG_PLANNER_TAIL, last_tail_cnt, tail); + last_tail_cnt = tail; + } + #endif + #endif - #ifdef MAX7219_DEBUG_STEPPER_QUEUE + #ifdef MAX7219_DEBUG_PLANNER_QUEUE static int16_t last_depth = 0; - int16_t current_depth = head - tail; - if (current_depth != last_depth) { // usually, no update will be needed. - if (current_depth < 0) current_depth += BLOCK_BUFFER_SIZE; - NOMORE(current_depth, BLOCK_BUFFER_SIZE); - NOMORE(current_depth, 16); // if the BLOCK_BUFFER_SIZE is greater than 16, two lines - // of LEDs is enough to see if the buffer is draining - - const uint8_t st = MIN(current_depth, last_depth), - en = MAX(current_depth, last_depth); - if (current_depth < last_depth) - for (uint8_t i = st; i <= en; i++) // clear the highest order LEDs - Max7219_LED_Off(MAX7219_DEBUG_STEPPER_QUEUE + (i & 1), i / 2); - else - for (uint8_t i = st; i <= en; i++) // set the LEDs to current depth - Max7219_LED_On(MAX7219_DEBUG_STEPPER_QUEUE + (i & 1), i / 2); - + const int16_t current_depth = (head - tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1) & 0xF; + if (current_depth != last_depth) { + Max7219_Quantity16(MAX7219_DEBUG_PLANNER_QUEUE, last_depth, current_depth); last_depth = current_depth; } #endif diff --git a/Marlin/src/feature/Max7219_Debug_LEDs.h b/Marlin/src/feature/Max7219_Debug_LEDs.h index 3beccb0ea8..dec159cee9 100644 --- a/Marlin/src/feature/Max7219_Debug_LEDs.h +++ b/Marlin/src/feature/Max7219_Debug_LEDs.h @@ -22,11 +22,9 @@ /** * This module is off by default, but can be enabled to facilitate the display of - * extra debug information during code development. It assumes the existence of a - * Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this: - * http://www.ebay.com/itm/191781645249 for under $2.00 including shipping. + * extra debug information during code development. * - * Just connect up +5v and GND to give it power, then connect up the pins assigned + * Just connect up 5V and GND to give it power, then connect up the pins assigned * in Configuration_adv.h. For example, on the Re-ARM you could use: * * #define MAX7219_CLK_PIN 77 @@ -35,28 +33,13 @@ * * Max7219_init() is called automatically at startup, and then there are a number of * support functions available to control the LEDs in the 8x8 grid. - * - * void Max7219_init(); - * void Max7219_PutByte(uint8_t data); - * void Max7219(uint8_t reg, uint8_t data); - * void Max7219_LED_Set(uint8_t row, uint8_t col, bool on); - * void Max7219_LED_On(uint8_t col, uint8_t row); - * void Max7219_LED_Off(uint8_t col, uint8_t row); - * void Max7219_LED_Toggle(uint8_t row, uint8_t col); - * void Max7219_Clear_Row(uint8_t row); - * void Max7219_Clear_Column(uint8_t col); - * void Max7219_Set_Row(uint8_t row, uint8_t val); - * void Max7219_Set_2_Rows(uint8_t row, uint16_t val); - * void Max7219_Set_4_Rows(uint8_t row, uint32_t val); - * void Max7219_Set_Column(uint8_t col, uint8_t val); - * void Max7219_idle_tasks(); */ #ifndef __MAX7219_DEBUG_LEDS_H__ #define __MAX7219_DEBUG_LEDS_H__ // -// define max7219 registers +// MAX7219 registers // #define max7219_reg_noop 0x00 #define max7219_reg_digit0 0x01 @@ -68,23 +51,33 @@ #define max7219_reg_digit6 0x07 #define max7219_reg_digit7 0x08 -#define max7219_reg_intensity 0x0A -#define max7219_reg_displayTest 0x0F #define max7219_reg_decodeMode 0x09 +#define max7219_reg_intensity 0x0A #define max7219_reg_scanLimit 0x0B #define max7219_reg_shutdown 0x0C +#define max7219_reg_displayTest 0x0F void Max7219_init(); void Max7219_PutByte(uint8_t data); + +// Set a single register (e.g., a whole native row) void Max7219(const uint8_t reg, const uint8_t data); -void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on); -void Max7219_LED_On(const uint8_t row, const uint8_t col); -void Max7219_LED_Off(const uint8_t row, const uint8_t col); -void Max7219_LED_Toggle(const uint8_t row, const uint8_t col); -void Max7219_Clear_Row(const uint8_t row); -void Max7219_Clear_Column(const uint8_t col); -void Max7219_Set_Row(const uint8_t row, const uint8_t val); + +// Set a single LED by XY coordinate +void Max7219_LED_Set(const uint8_t x, const uint8_t y, const bool on); +void Max7219_LED_On(const uint8_t x, const uint8_t y); +void Max7219_LED_Off(const uint8_t x, const uint8_t y); +void Max7219_LED_Toggle(const uint8_t x, const uint8_t y); + +// Set all 8 LEDs in a single column void Max7219_Set_Column(const uint8_t col, const uint8_t val); +void Max7219_Clear_Column(const uint8_t col); + +// Set all 8 LEDs in a single row +void Max7219_Set_Row(const uint8_t row, const uint8_t val); +void Max7219_Clear_Row(const uint8_t row); + +// Apply custom code to update the matrix void Max7219_idle_tasks(); #endif // __MAX7219_DEBUG_LEDS_H__ diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp index 2ed21e4acc..53a7f7252d 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp @@ -41,8 +41,6 @@ #include "../../../feature/bedlevel/bedlevel.h" #include "../../../libs/least_squares_fit.h" - #include "../../../feature/Max7219_Debug_LEDs.h" - #include #define UBL_G29_P31 diff --git a/Marlin/src/gcode/feature/leds/M7219.cpp b/Marlin/src/gcode/feature/leds/M7219.cpp new file mode 100644 index 0000000000..65079346c8 --- /dev/null +++ b/Marlin/src/gcode/feature/leds/M7219.cpp @@ -0,0 +1,60 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "../../../inc/MarlinConfigPre.h" + +#if ENABLED(MAX7219_GCODE) + +#include "../../gcode.h" +#include "../../../feature/Max7219_Debug_LEDs.h" + +/** + * M7219: Control the Max7219 LED matrix + * + * I - Initialize (clear) the matrix + * C - Set a column to the 8-bit value V + * R - Set a row to the 8-bit value V + * X - X position of an LED to set or toggle + * Y - Y position of an LED to set or toggle + * V - The 8-bit value or on/off state to set + */ +void GcodeSuite::M7219() { + if (parser.seen('I')) + for (uint8_t r = 0; r < 8; r++) Max7219_Set_Row(r, 0); + else if (parser.seenval('R')) { + const uint8_t r = parser.value_int(); + Max7219_Set_Row(r, parser.byteval('V')); + } + else if (parser.seenval('C')) { + const uint8_t c = parser.value_int(); + Max7219_Set_Column(c, parser.byteval('V')); + } + else if (parser.seenval('X') || parser.seenval('Y')) { + const uint8_t x = parser.byteval('X'), y = parser.byteval('Y'); + if (parser.seenval('V')) + Max7219_LED_Set(x, y, parser.boolval('V')); + else + Max7219_LED_Toggle(x, y); + } +} + +#endif // MAX7219_GCODE diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp index cd393f4e4d..377612dc59 100644 --- a/Marlin/src/gcode/gcode.cpp +++ b/Marlin/src/gcode/gcode.cpp @@ -599,6 +599,10 @@ void GcodeSuite::process_parsed_command( case 702: M702(); break; // M702: Unload Filament #endif + #if ENABLED(MAX7219_GCODE) + case 7219: M7219(); break; // M7219: Set LEDs, columns, and rows + #endif + #if ENABLED(LIN_ADVANCE) case 900: M900(); break; // M900: Set advance K factor. #endif diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index 3debb10db1..a655e557d3 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -727,6 +727,10 @@ private: static void M702(); #endif + #if ENABLED(MAX7219_GCODE) + static void M7219(); + #endif + #if HAS_BED_PROBE static void M851(); #endif diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index f84e50f260..4b75ddfae8 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -283,6 +283,12 @@ #error "JUNCTION_ACCELERATION_FACTOR is obsolete. Delete it from Configuration_adv.h." #elif defined(JUNCTION_ACCELERATION) #error "JUNCTION_ACCELERATION is obsolete. Delete it from Configuration_adv.h." +#elif defined(MAX7219_DEBUG_STEPPER_HEAD) + #error "MAX7219_DEBUG_STEPPER_HEAD is now MAX7219_DEBUG_PLANNER_HEAD. Please update your configuration." +#elif defined(MAX7219_DEBUG_STEPPER_TAIL) + #error "MAX7219_DEBUG_STEPPER_TAIL is now MAX7219_DEBUG_PLANNER_TAIL. Please update your configuration." +#elif defined(MAX7219_DEBUG_STEPPER_QUEUE) + #error "MAX7219_DEBUG_STEPPER_QUEUE is now MAX7219_DEBUG_PLANNER_QUEUE. Please update your configuration." #endif #define BOARD_MKS_13 -47