zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Step timing cleanup and rounding fix (#16258)

Browse source
This commit is contained in:
Jason Smith 2019-12-21 16:36:25 -08:00 committed by Scott Lahteine
parent f8065da48f
commit d5bc5547ee
2 changed files with 27 additions and 12 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

11
Marlin/src/module/stepper.cpp
View file

@ -338,6 +338,13 @@ xyze_int8_t Stepper::count_direction{0};
#if DISABLED(MIXING_EXTRUDER)
#define E_APPLY_STEP(v,Q) E_STEP_WRITE(stepper_extruder, v)
#endif
#define CYCLES_TO_NS(CYC) (1000UL * (CYC) / ((F_CPU) / 1000000))
constexpr uint32_t NS_PER_PULSE_TIMER_TICK = 1000000000UL / (STEPPER_TIMER_RATE);
// Round up when converting from ns to timer ticks
constexpr uint32_t NS_TO_PULSE_TIMER_TICKS(uint32_t NS) { return (NS + (NS_PER_PULSE_TIMER_TICK) / 2) / (NS_PER_PULSE_TIMER_TICK); }
#define TIMER_SETUP_NS (CYCLES_TO_NS(TIMER_READ_ADD_AND_STORE_CYCLES))
#define PULSE_HIGH_TICK_COUNT hal_timer_t(NS_TO_PULSE_TIMER_TICKS(_MIN_PULSE_HIGH_NS - _MIN(_MIN_PULSE_HIGH_NS, TIMER_SETUP_NS)))
@ -1430,7 +1437,7 @@ void Stepper::stepper_pulse_phase_isr() {
// Take multiple steps per interrupt (For high speed moves)
bool firstStep = true;
xyze_bool_t step_needed{0};
hal_timer_t end_tick_count;
hal_timer_t end_tick_count = 0;
do {
#define _APPLY_STEP(AXIS) AXIS ##_APPLY_STEP
@ -1941,7 +1948,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
// Step E stepper if we have steps
bool firstStep = true;
hal_timer_t end_tick_count;
hal_timer_t end_tick_count = 0;
while (LA_steps) {
#if (MINIMUM_STEPPER_PULSE || MAXIMUM_STEPPER_RATE) && DISABLED(I2S_STEPPER_STREAM)

28
Marlin/src/module/stepper.h
View file

@ -56,7 +56,23 @@
// Estimate the amount of time the Stepper ISR will take to execute
//
/**
* The method of calculating these cycle-constants is unclear.
* Most of them are no longer used directly for pulse timing, and exist
* only to estimate a maximum step rate based on the user's configuration.
* As 32-bit processors continue to diverge, maintaining cycle counts
* will become increasingly difficult and error-prone.
*/
#ifdef CPU_32_BIT
/**
* Duration of START_TIMED_PULSE
*
* ...as measured on an LPC1768 with a scope and converted to cycles.
* Not applicable to other 32-bit processors, but as long as others
* take longer, pulses will be longer. For example the SKR Pro
* (stm32f407zgt6) requires ~60 cyles.
*/
#define TIMER_READ_ADD_AND_STORE_CYCLES 34UL
// The base ISR takes 792 cycles
@ -86,6 +102,7 @@
#define ISR_STEPPER_CYCLES 16UL
#else
// Cycles to perform actions in START_TIMED_PULSE
#define TIMER_READ_ADD_AND_STORE_CYCLES 13UL
// The base ISR takes 752 cycles
@ -157,17 +174,13 @@
#define MIN_STEPPER_PULSE_CYCLES _MIN_STEPPER_PULSE_CYCLES(1UL)
#endif
// Calculate the minimum ticks of the PULSE timer that must elapse with the step pulse enabled
// adding the "start stepper pulse" code section execution cycles to account for that not all
// pulses start at the beginning of the loop, so an extra time must be added to compensate so
// the last generated pulse (usually the extruder stepper) has the right length
// Calculate the minimum pulse times (high and low)
#if MINIMUM_STEPPER_PULSE && MAXIMUM_STEPPER_RATE
constexpr uint32_t _MIN_STEP_PERIOD_NS = 1000000000UL / MAXIMUM_STEPPER_RATE;
constexpr uint32_t _MIN_PULSE_HIGH_NS = 1000UL * MINIMUM_STEPPER_PULSE;
constexpr uint32_t _MIN_PULSE_LOW_NS = _MAX((_MIN_STEP_PERIOD_NS - _MIN(_MIN_STEP_PERIOD_NS, _MIN_PULSE_HIGH_NS)), _MIN_PULSE_HIGH_NS);
#elif MINIMUM_STEPPER_PULSE
// Assume 50% duty cycle
constexpr uint32_t _MIN_STEP_PERIOD_NS = 1000000000UL / MAXIMUM_STEPPER_RATE;
constexpr uint32_t _MIN_PULSE_HIGH_NS = 1000UL * MINIMUM_STEPPER_PULSE;
constexpr uint32_t _MIN_PULSE_LOW_NS = _MIN_PULSE_HIGH_NS;
#elif MAXIMUM_STEPPER_RATE
@ -178,11 +191,6 @@
#error "Expected at least one of MINIMUM_STEPPER_PULSE or MAXIMUM_STEPPER_RATE to be defined"
#endif
// TODO: NS_TO_PULSE_TIMER_TICKS has some rounding issues:
// 1. PULSE_TIMER_TICKS_PER_US rounds to an integer, which loses 20% of the count for a 2.5 MHz pulse tick (such as for LPC1768)
// 2. The math currently rounds down to the closes tick. Perhaps should round up.
constexpr uint32_t NS_TO_PULSE_TIMER_TICKS(uint32_t NS) { return PULSE_TIMER_TICKS_PER_US * (NS) / 1000UL; }
#define CYCLES_TO_NS(CYC) (1000UL * (CYC) / ((F_CPU) / 1000000))
// But the user could be enforcing a minimum time, so the loop time is
#define ISR_LOOP_CYCLES (ISR_LOOP_BASE_CYCLES + _MAX(MIN_STEPPER_PULSE_CYCLES, MIN_ISR_LOOP_CYCLES))