Use uint8_t for all fan speeds (#12032)

This commit is contained in:
Scott Lahteine 2018-10-07 15:34:41 -05:00 committed by GitHub
parent cb7844c8d4
commit d6b0fbd771
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
25 changed files with 88 additions and 91 deletions

View file

@ -170,14 +170,13 @@ uint8_t axis_homed, axis_known_position; // = 0
#endif #endif
#if FAN_COUNT > 0 #if FAN_COUNT > 0
int16_t fanSpeeds[FAN_COUNT] = { 0 }; uint8_t fan_speed[FAN_COUNT] = { 0 };
#if ENABLED(EXTRA_FAN_SPEED) #if ENABLED(EXTRA_FAN_SPEED)
int16_t old_fanSpeeds[FAN_COUNT], uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT];
new_fanSpeeds[FAN_COUNT];
#endif #endif
#if ENABLED(PROBING_FANS_OFF) #if ENABLED(PROBING_FANS_OFF)
bool fans_paused; // = false; bool fans_paused; // = false;
int16_t paused_fanSpeeds[FAN_COUNT] = { 0 }; uint8_t paused_fan_speed[FAN_COUNT] = { 0 };
#endif #endif
#endif #endif
@ -972,7 +971,7 @@ void loop() {
print_job_timer.stop(); print_job_timer.stop();
thermalManager.disable_all_heaters(); thermalManager.disable_all_heaters();
#if FAN_COUNT > 0 #if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; for (uint8_t i = 0; i < FAN_COUNT; i++) fan_speed[i] = 0;
#endif #endif
wait_for_heatup = false; wait_for_heatup = false;
#if ENABLED(POWER_LOSS_RECOVERY) #if ENABLED(POWER_LOSS_RECOVERY)

View file

@ -208,19 +208,18 @@ extern volatile bool wait_for_heatup;
extern millis_t max_inactive_time, stepper_inactive_time; extern millis_t max_inactive_time, stepper_inactive_time;
#if FAN_COUNT > 0 #if FAN_COUNT > 0
extern int16_t fanSpeeds[FAN_COUNT]; extern uint8_t fan_speed[FAN_COUNT];
#if ENABLED(EXTRA_FAN_SPEED) #if ENABLED(EXTRA_FAN_SPEED)
extern int16_t old_fanSpeeds[FAN_COUNT], extern uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT];
new_fanSpeeds[FAN_COUNT];
#endif #endif
#if ENABLED(PROBING_FANS_OFF) #if ENABLED(PROBING_FANS_OFF)
extern bool fans_paused; extern bool fans_paused;
extern int16_t paused_fanSpeeds[FAN_COUNT]; extern uint8_t paused_fan_speed[FAN_COUNT];
#endif #endif
#endif #endif
#if ENABLED(USE_CONTROLLER_FAN) #if ENABLED(USE_CONTROLLER_FAN)
extern uint8_t controllerFanSpeed; extern uint8_t controllerfan_speed;
#endif #endif
#if HAS_POWER_SWITCH #if HAS_POWER_SWITCH

View file

@ -27,7 +27,7 @@
#include "../module/stepper_indirection.h" #include "../module/stepper_indirection.h"
#include "../module/temperature.h" #include "../module/temperature.h"
uint8_t controllerFanSpeed; uint8_t controllerfan_speed;
void controllerfan_update() { void controllerfan_update() {
static millis_t lastMotorOn = 0, // Last time a motor was turned on static millis_t lastMotorOn = 0, // Last time a motor was turned on
@ -75,7 +75,7 @@ void controllerfan_update() {
// Fan off if no steppers have been enabled for CONTROLLERFAN_SECS seconds // Fan off if no steppers have been enabled for CONTROLLERFAN_SECS seconds
uint8_t speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : CONTROLLERFAN_SPEED; uint8_t speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : CONTROLLERFAN_SPEED;
controllerFanSpeed = speed; controllerfan_speed = speed;
// allows digital or PWM fan output to be used (see M42 handling) // allows digital or PWM fan output to be used (see M42 handling)
WRITE(CONTROLLER_FAN_PIN, speed); WRITE(CONTROLLER_FAN_PIN, speed);

View file

@ -39,15 +39,15 @@ millis_t Power::lastPowerOn;
bool Power::is_power_needed() { bool Power::is_power_needed() {
#if ENABLED(AUTO_POWER_FANS) #if ENABLED(AUTO_POWER_FANS)
for (uint8_t i = 0; i < FAN_COUNT; i++) if (fanSpeeds[i] > 0) return true; for (uint8_t i = 0; i < FAN_COUNT; i++) if (fan_speed[i]) return true;
#endif #endif
#if ENABLED(AUTO_POWER_E_FANS) #if ENABLED(AUTO_POWER_E_FANS)
HOTEND_LOOP() if (thermalManager.autofan_speed[e] > 0) return true; HOTEND_LOOP() if (thermalManager.autofan_speed[e]) return true;
#endif #endif
#if ENABLED(AUTO_POWER_CONTROLLERFAN) && HAS_CONTROLLER_FAN && ENABLED(USE_CONTROLLER_FAN) #if ENABLED(AUTO_POWER_CONTROLLERFAN) && HAS_CONTROLLER_FAN && ENABLED(USE_CONTROLLER_FAN)
if (controllerFanSpeed > 0) return true; if (controllerfan_speed) return true;
#endif #endif
// If any of the drivers or the bed are enabled... // If any of the drivers or the bed are enabled...

View file

@ -82,9 +82,9 @@ extern uint8_t commands_in_queue, cmd_queue_index_r;
#endif #endif
#if FAN_COUNT #if FAN_COUNT
SERIAL_PROTOCOLPGM("fanSpeeds: "); SERIAL_PROTOCOLPGM("fan_speed: ");
for (int8_t i = 0; i < FAN_COUNT; i++) { for (int8_t i = 0; i < FAN_COUNT; i++) {
SERIAL_PROTOCOL(job_recovery_info.fanSpeeds[i]); SERIAL_PROTOCOL(job_recovery_info.fan_speed[i]);
if (i < FAN_COUNT - 1) SERIAL_CHAR(','); if (i < FAN_COUNT - 1) SERIAL_CHAR(',');
} }
SERIAL_EOL(); SERIAL_EOL();
@ -264,7 +264,7 @@ void save_job_recovery_info() {
#endif #endif
#if FAN_COUNT #if FAN_COUNT
COPY(job_recovery_info.fanSpeeds, fanSpeeds); COPY(job_recovery_info.fan_speed, fan_speed);
#endif #endif
#if HAS_LEVELING #if HAS_LEVELING

View file

@ -52,7 +52,7 @@ typedef struct {
#endif #endif
#if FAN_COUNT #if FAN_COUNT
int16_t fanSpeeds[FAN_COUNT]; uint8_t fan_speed[FAN_COUNT];
#endif #endif
#if HAS_LEVELING #if HAS_LEVELING

View file

@ -52,13 +52,13 @@ void GcodeSuite::M42() {
#if FAN_COUNT > 0 #if FAN_COUNT > 0
switch (pin) { switch (pin) {
#if HAS_FAN0 #if HAS_FAN0
case FAN_PIN: fanSpeeds[0] = pin_status; break; case FAN_PIN: fan_speed[0] = pin_status; break;
#endif #endif
#if HAS_FAN1 #if HAS_FAN1
case FAN1_PIN: fanSpeeds[1] = pin_status; break; case FAN1_PIN: fan_speed[1] = pin_status; break;
#endif #endif
#if HAS_FAN2 #if HAS_FAN2
case FAN2_PIN: fanSpeeds[2] = pin_status; break; case FAN2_PIN: fan_speed[2] = pin_status; break;
#endif #endif
} }
#endif #endif

View file

@ -98,10 +98,10 @@ void GcodeSuite::M81() {
planner.finish_and_disable(); planner.finish_and_disable();
#if FAN_COUNT > 0 #if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; for (uint8_t i = 0; i < FAN_COUNT; i++) fan_speed[i] = 0;
#if ENABLED(PROBING_FANS_OFF) #if ENABLED(PROBING_FANS_OFF)
fans_paused = false; fans_paused = false;
ZERO(paused_fanSpeeds); ZERO(paused_fan_speed);
#endif #endif
#endif #endif

View file

@ -49,7 +49,7 @@ void GcodeSuite::M145() {
} }
if (parser.seenval('F')) { if (parser.seenval('F')) {
v = parser.value_int(); v = parser.value_int();
lcd_preheat_fan_speed[material] = constrain(v, 0, 255); lcd_preheat_fan_speed[material] = (uint8_t)constrain(v, 0, 255);
} }
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
if (parser.seenval('B')) { if (parser.seenval('B')) {

View file

@ -25,7 +25,7 @@
#if FAN_COUNT > 0 #if FAN_COUNT > 0
#include "../gcode.h" #include "../gcode.h"
#include "../../Marlin.h" // for fanSpeeds — should move those to Planner #include "../../Marlin.h" // for fan_speed — should move those to Planner
/** /**
* M106: Set Fan Speed * M106: Set Fan Speed
@ -48,21 +48,22 @@ void GcodeSuite::M106() {
if (t > 0) { if (t > 0) {
switch (t) { switch (t) {
case 1: case 1:
fanSpeeds[p] = old_fanSpeeds[p]; fan_speed[p] = old_fan_speed[p];
break; break;
case 2: case 2:
old_fanSpeeds[p] = fanSpeeds[p]; old_fan_speed[p] = fan_speed[p];
fanSpeeds[p] = new_fanSpeeds[p]; fan_speed[p] = new_fan_speed[p];
break; break;
default: default:
new_fanSpeeds[p] = MIN(t, 255); new_fan_speed[p] = MIN(t, 255);
break; break;
} }
return; return;
} }
#endif // EXTRA_FAN_SPEED #endif // EXTRA_FAN_SPEED
const uint16_t s = parser.ushortval('S', 255); const uint16_t s = parser.ushortval('S', 255);
fanSpeeds[p] = MIN(s, 255U); fan_speed[p] = MIN(s, 255U);
} }
} }
@ -71,7 +72,7 @@ void GcodeSuite::M106() {
*/ */
void GcodeSuite::M107() { void GcodeSuite::M107() {
const uint16_t p = parser.ushortval('P'); const uint16_t p = parser.ushortval('P');
if (p < FAN_COUNT) fanSpeeds[p] = 0; if (p < FAN_COUNT) fan_speed[p] = 0;
} }
#endif // FAN_COUNT > 0 #endif // FAN_COUNT > 0

View file

@ -207,7 +207,7 @@ static void lcd_implementation_status_screen() {
static uint8_t fan_frame; static uint8_t fan_frame;
if (old_blink != blink) { if (old_blink != blink) {
old_blink = blink; old_blink = blink;
if (!fanSpeeds[0] || ++fan_frame >= FAN_ANIM_FRAMES) fan_frame = 0; if (!fan_speed[0] || ++fan_frame >= FAN_ANIM_FRAMES) fan_frame = 0;
} }
#endif #endif
@ -245,7 +245,7 @@ static void lcd_implementation_status_screen() {
fan_frame == 3 ? status_screen3_bmp : fan_frame == 3 ? status_screen3_bmp :
#endif #endif
#else #else
blink && fanSpeeds[0] ? status_screen1_bmp : blink && fan_speed[0] ? status_screen1_bmp :
#endif #endif
#endif #endif
status_screen0_bmp status_screen0_bmp
@ -269,7 +269,7 @@ static void lcd_implementation_status_screen() {
#if HAS_FAN0 #if HAS_FAN0
if (PAGE_CONTAINS(STATUS_SCREEN_FAN_TEXT_Y - 7, STATUS_SCREEN_FAN_TEXT_Y)) { if (PAGE_CONTAINS(STATUS_SCREEN_FAN_TEXT_Y - 7, STATUS_SCREEN_FAN_TEXT_Y)) {
// Fan // Fan
const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256; const uint16_t per = (((uint16_t)fan_speed[0] + 1) * 100) / 256;
if (per) { if (per) {
lcd_moveto(STATUS_SCREEN_FAN_TEXT_X, STATUS_SCREEN_FAN_TEXT_Y); lcd_moveto(STATUS_SCREEN_FAN_TEXT_X, STATUS_SCREEN_FAN_TEXT_Y);
lcd_put_u8str(itostr3(per)); lcd_put_u8str(itostr3(per));

View file

@ -710,7 +710,7 @@ bool ST7920_Lite_Status_Screen::indicators_changed() {
// them only during blinks we gain a bit of stability. // them only during blinks we gain a bit of stability.
const bool blink = lcd_blink(); const bool blink = lcd_blink();
const uint16_t feedrate_perc = feedrate_percentage; const uint16_t feedrate_perc = feedrate_percentage;
const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; const uint8_t fs = (((uint16_t)fan_speed[0] + 1) * 100) / 256;
const int16_t extruder_1_target = thermalManager.degTargetHotend(0); const int16_t extruder_1_target = thermalManager.degTargetHotend(0);
#if HOTENDS > 1 #if HOTENDS > 1
const int16_t extruder_2_target = thermalManager.degTargetHotend(1); const int16_t extruder_2_target = thermalManager.degTargetHotend(1);
@ -719,7 +719,7 @@ bool ST7920_Lite_Status_Screen::indicators_changed() {
const int16_t bed_target = thermalManager.degTargetBed(); const int16_t bed_target = thermalManager.degTargetBed();
#endif #endif
static uint16_t last_checksum = 0; static uint16_t last_checksum = 0;
const uint16_t checksum = blink ^ feedrate_perc ^ fan_speed ^ extruder_1_target const uint16_t checksum = blink ^ feedrate_perc ^ fs ^ extruder_1_target
#if HOTENDS > 1 #if HOTENDS > 1
^ extruder_2_target ^ extruder_2_target
#endif #endif
@ -737,7 +737,7 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
const bool blink = lcd_blink(); const bool blink = lcd_blink();
const duration_t elapsed = print_job_timer.duration(); const duration_t elapsed = print_job_timer.duration();
const uint16_t feedrate_perc = feedrate_percentage; const uint16_t feedrate_perc = feedrate_percentage;
const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; const uint8_t fs = (((uint16_t)fan_speed[0] + 1) * 100) / 256;
const int16_t extruder_1_temp = thermalManager.degHotend(0), const int16_t extruder_1_temp = thermalManager.degHotend(0),
extruder_1_target = thermalManager.degTargetHotend(0); extruder_1_target = thermalManager.degTargetHotend(0);
#if HOTENDS > 1 #if HOTENDS > 1
@ -756,12 +756,12 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
#if HAS_HEATED_BED #if HAS_HEATED_BED
draw_bed_temp(bed_temp, bed_target, forceUpdate); draw_bed_temp(bed_temp, bed_target, forceUpdate);
#endif #endif
draw_fan_speed(fan_speed); draw_fan_speed(fs);
draw_print_time(elapsed); draw_print_time(elapsed);
draw_feedrate_percentage(feedrate_perc); draw_feedrate_percentage(feedrate_perc);
// Update the fan and bed animations // Update the fan and bed animations
if (fan_speed > 0) draw_fan_icon(blink); if (fs) draw_fan_icon(blink);
#if HAS_HEATED_BED #if HAS_HEATED_BED
if (bed_target > 0) if (bed_target > 0)
draw_heat_icon(blink, true); draw_heat_icon(blink, true);

View file

@ -255,7 +255,7 @@ void process_lcd_p_command(const char* command) {
print_job_timer.stop(); print_job_timer.stop();
thermalManager.disable_all_heaters(); thermalManager.disable_all_heaters();
#if FAN_COUNT > 0 #if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; for (uint8_t i = 0; i < FAN_COUNT; i++) fan_speed[i] = 0;
#endif #endif
wait_for_heatup = false; wait_for_heatup = false;
write_to_lcd_P(PSTR("{SYS:STARTED}")); write_to_lcd_P(PSTR("{SYS:STARTED}"));

View file

@ -159,7 +159,8 @@ millis_t next_lcd_update_ms;
constexpr int8_t menu_bottom = LCD_HEIGHT - (TALL_FONT_CORRECTION); constexpr int8_t menu_bottom = LCD_HEIGHT - (TALL_FONT_CORRECTION);
// Initialized by settings.load() // Initialized by settings.load()
int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2];
uint8_t lcd_preheat_fan_speed[2];
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
bool lcd_external_control; // = false bool lcd_external_control; // = false
@ -945,7 +946,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
// Restore print cooling fan speeds // Restore print cooling fan speeds
for (uint8_t i = 0; i < FAN_COUNT; i++) { for (uint8_t i = 0; i < FAN_COUNT; i++) {
int16_t f = job_recovery_info.fanSpeeds[i]; uint8_t f = job_recovery_info.fan_speed[i];
if (f) { if (f) {
sprintf_P(cmd, PSTR("M106 P%i S%i"), i, f); sprintf_P(cmd, PSTR("M106 P%i S%i"), i, f);
enqueue_and_echo_command(cmd); enqueue_and_echo_command(cmd);
@ -1553,21 +1554,21 @@ void lcd_quick_feedback(const bool clear_buttons) {
// //
#if FAN_COUNT > 0 #if FAN_COUNT > 0
#if HAS_FAN0 #if HAS_FAN0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fanSpeeds[0], 0, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fan_speed[0], 0, 255);
#if ENABLED(EXTRA_FAN_SPEED) #if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fanSpeeds[0], 3, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fan_speed[0], 3, 255);
#endif #endif
#endif #endif
#if HAS_FAN1 #if HAS_FAN1
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 2", &fan_speed[1], 0, 255);
#if ENABLED(EXTRA_FAN_SPEED) #if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 2", &new_fanSpeeds[1], 3, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &new_fan_speed[1], 3, 255);
#endif #endif
#endif #endif
#if HAS_FAN2 #if HAS_FAN2
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 3", &fan_speed[2], 0, 255);
#if ENABLED(EXTRA_FAN_SPEED) #if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 3", &new_fanSpeeds[2], 3, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &new_fan_speed[2], 3, 255);
#endif #endif
#endif #endif
#endif // FAN_COUNT > 0 #endif // FAN_COUNT > 0
@ -1669,7 +1670,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
* "Temperature" submenu items * "Temperature" submenu items
* *
*/ */
void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb, const int16_t fan) { void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb, const uint8_t fan) {
if (temph > 0) thermalManager.setTargetHotend(MIN(heater_maxtemp[endnum], temph), endnum); if (temph > 0) thermalManager.setTargetHotend(MIN(heater_maxtemp[endnum], temph), endnum);
#if HAS_HEATED_BED #if HAS_HEATED_BED
if (tempb >= 0) thermalManager.setTargetBed(tempb); if (tempb >= 0) thermalManager.setTargetBed(tempb);
@ -1678,9 +1679,9 @@ void lcd_quick_feedback(const bool clear_buttons) {
#endif #endif
#if FAN_COUNT > 0 #if FAN_COUNT > 0
#if FAN_COUNT > 1 #if FAN_COUNT > 1
fanSpeeds[active_extruder < FAN_COUNT ? active_extruder : 0] = fan; fan_speed[active_extruder < FAN_COUNT ? active_extruder : 0] = fan;
#else #else
fanSpeeds[0] = fan; fan_speed[0] = fan;
#endif #endif
#else #else
UNUSED(fan); UNUSED(fan);
@ -1915,7 +1916,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
void lcd_cooldown() { void lcd_cooldown() {
#if FAN_COUNT > 0 #if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; for (uint8_t i = 0; i < FAN_COUNT; i++) fan_speed[i] = 0;
#endif #endif
thermalManager.disable_all_heaters(); thermalManager.disable_all_heaters();
lcd_return_to_status(); lcd_return_to_status();
@ -3609,21 +3610,21 @@ void lcd_quick_feedback(const bool clear_buttons) {
// //
#if FAN_COUNT > 0 #if FAN_COUNT > 0
#if HAS_FAN0 #if HAS_FAN0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fanSpeeds[0], 0, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fan_speed[0], 0, 255);
#if ENABLED(EXTRA_FAN_SPEED) #if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fanSpeeds[0], 3, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fan_speed[0], 3, 255);
#endif #endif
#endif #endif
#if HAS_FAN1 #if HAS_FAN1
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 2", &fan_speed[1], 0, 255);
#if ENABLED(EXTRA_FAN_SPEED) #if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 2", &new_fanSpeeds[1], 3, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 2", &new_fan_speed[1], 3, 255);
#endif #endif
#endif #endif
#if HAS_FAN2 #if HAS_FAN2
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_FAN_SPEED " 3", &fan_speed[2], 0, 255);
#if ENABLED(EXTRA_FAN_SPEED) #if ENABLED(EXTRA_FAN_SPEED)
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 3", &new_fanSpeeds[2], 3, 255); MENU_MULTIPLIER_ITEM_EDIT(int8, MSG_EXTRA_FAN_SPEED " 3", &new_fan_speed[2], 3, 255);
#endif #endif
#endif #endif
#endif // FAN_COUNT > 0 #endif // FAN_COUNT > 0
@ -3755,7 +3756,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
#endif #endif
START_MENU(); START_MENU();
MENU_BACK(MSG_CONFIGURATION); MENU_BACK(MSG_CONFIGURATION);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255); MENU_ITEM_EDIT(int8, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255);
#if HAS_TEMP_HOTEND #if HAS_TEMP_HOTEND
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15); MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15);
#endif #endif

View file

@ -107,7 +107,8 @@
typedef void (*screenFunc_t)(); typedef void (*screenFunc_t)();
typedef void (*menuAction_t)(); typedef void (*menuAction_t)();
extern int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; extern int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2];
extern uint8_t lcd_preheat_fan_speed[2];
#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
extern bool lcd_external_control; extern bool lcd_external_control;

View file

@ -1008,13 +1008,13 @@ static void lcd_implementation_status_screen() {
#if FAN_COUNT > 0 #if FAN_COUNT > 0
if (0 if (0
#if HAS_FAN0 #if HAS_FAN0
|| fanSpeeds[0] || fan_speed[0]
#endif #endif
#if HAS_FAN1 #if HAS_FAN1
|| fanSpeeds[1] || fan_speed[1]
#endif #endif
#if HAS_FAN2 #if HAS_FAN2
|| fanSpeeds[2] || fan_speed[2]
#endif #endif
) leds |= LED_C; ) leds |= LED_C;
#endif // FAN_COUNT > 0 #endif // FAN_COUNT > 0

View file

@ -37,7 +37,7 @@
*/ */
// Change EEPROM version if the structure changes // Change EEPROM version if the structure changes
#define EEPROM_VERSION "V59" #define EEPROM_VERSION "V60"
#define EEPROM_OFFSET 0 #define EEPROM_OFFSET 0
// Check the integrity of data offsets. // Check the integrity of data offsets.
@ -214,8 +214,8 @@ typedef struct SettingsDataStruct {
// ULTIPANEL // ULTIPANEL
// //
int16_t lcd_preheat_hotend_temp[2], // M145 S0 H int16_t lcd_preheat_hotend_temp[2], // M145 S0 H
lcd_preheat_bed_temp[2], // M145 S0 B lcd_preheat_bed_temp[2]; // M145 S0 B
lcd_preheat_fan_speed[2]; // M145 S0 F uint8_t lcd_preheat_fan_speed[2]; // M145 S0 F
// //
// PIDTEMP // PIDTEMP
@ -630,8 +630,8 @@ void MarlinSettings::postprocess() {
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
constexpr int16_t lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND }, constexpr int16_t lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND },
lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED }, lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED };
lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED }; constexpr uint8_t lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED };
#endif #endif
EEPROM_WRITE(lcd_preheat_hotend_temp); EEPROM_WRITE(lcd_preheat_hotend_temp);
@ -1238,17 +1238,13 @@ void MarlinSettings::postprocess() {
_FIELD_TEST(lcd_preheat_hotend_temp); _FIELD_TEST(lcd_preheat_hotend_temp);
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2];
uint8_t lcd_preheat_fan_speed[2];
#endif #endif
EEPROM_READ(lcd_preheat_hotend_temp); // 2 floats EEPROM_READ(lcd_preheat_hotend_temp); // 2 floats
EEPROM_READ(lcd_preheat_bed_temp); // 2 floats EEPROM_READ(lcd_preheat_bed_temp); // 2 floats
EEPROM_READ(lcd_preheat_fan_speed); // 2 floats EEPROM_READ(lcd_preheat_fan_speed); // 2 floats
//EEPROM_ASSERT(
// WITHIN(lcd_preheat_fan_speed, 0, 255),
// "lcd_preheat_fan_speed out of range"
//);
// //
// Hotend PID // Hotend PID
// //
@ -2489,7 +2485,7 @@ void MarlinSettings::reset(PORTARG_SOLO) {
SERIAL_ECHOPAIR_P(port, " M145 S", (int)i); SERIAL_ECHOPAIR_P(port, " M145 S", (int)i);
SERIAL_ECHOPAIR_P(port, " H", TEMP_UNIT(lcd_preheat_hotend_temp[i])); SERIAL_ECHOPAIR_P(port, " H", TEMP_UNIT(lcd_preheat_hotend_temp[i]));
SERIAL_ECHOPAIR_P(port, " B", TEMP_UNIT(lcd_preheat_bed_temp[i])); SERIAL_ECHOPAIR_P(port, " B", TEMP_UNIT(lcd_preheat_bed_temp[i]));
SERIAL_ECHOLNPAIR_P(port, " F", lcd_preheat_fan_speed[i]); SERIAL_ECHOLNPAIR_P(port, " F", int(lcd_preheat_fan_speed[i]));
} }
#endif // ULTIPANEL #endif // ULTIPANEL

View file

@ -1187,7 +1187,7 @@ void Planner::recalculate() {
* Maintain fans, paste extruder pressure, * Maintain fans, paste extruder pressure,
*/ */
void Planner::check_axes_activity() { void Planner::check_axes_activity() {
unsigned char axis_active[NUM_AXIS] = { 0 }, uint8_t axis_active[NUM_AXIS] = { 0 },
tail_fan_speed[FAN_COUNT]; tail_fan_speed[FAN_COUNT];
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
@ -1225,7 +1225,7 @@ void Planner::check_axes_activity() {
} }
else { else {
#if FAN_COUNT > 0 #if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++) tail_fan_speed[i] = fanSpeeds[i]; for (uint8_t i = 0; i < FAN_COUNT; i++) tail_fan_speed[i] = fan_speed[i];
#endif #endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)
@ -1774,7 +1774,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#endif #endif
#if FAN_COUNT > 0 #if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++) block->fan_speed[i] = fanSpeeds[i]; for (uint8_t i = 0; i < FAN_COUNT; i++) block->fan_speed[i] = fan_speed[i];
#endif #endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)

View file

@ -144,7 +144,7 @@ typedef struct {
acceleration_steps_per_s2; // acceleration steps/sec^2 acceleration_steps_per_s2; // acceleration steps/sec^2
#if FAN_COUNT > 0 #if FAN_COUNT > 0
uint16_t fan_speed[FAN_COUNT]; uint8_t fan_speed[FAN_COUNT];
#endif #endif
#if ENABLED(BARICUDA) #if ENABLED(BARICUDA)

View file

@ -273,12 +273,12 @@ float zprobe_zoffset; // Initialized by settings.load()
fans_paused = p; fans_paused = p;
if (p) if (p)
for (uint8_t x = 0; x < FAN_COUNT; x++) { for (uint8_t x = 0; x < FAN_COUNT; x++) {
paused_fanSpeeds[x] = fanSpeeds[x]; paused_fan_speed[x] = fan_speed[x];
fanSpeeds[x] = 0; fan_speed[x] = 0;
} }
else else
for (uint8_t x = 0; x < FAN_COUNT; x++) for (uint8_t x = 0; x < FAN_COUNT; x++)
fanSpeeds[x] = paused_fanSpeeds[x]; fan_speed[x] = paused_fan_speed[x];
} }
} }

View file

@ -97,7 +97,7 @@ int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 },
Temperature::target_temperature[HOTENDS] = { 0 }; Temperature::target_temperature[HOTENDS] = { 0 };
#if ENABLED(AUTO_POWER_E_FANS) #if ENABLED(AUTO_POWER_E_FANS)
int16_t Temperature::autofan_speed[HOTENDS] = { 0 }; uint8_t Temperature::autofan_speed[HOTENDS] = { 0 };
#endif #endif
#if HAS_HEATED_BED #if HAS_HEATED_BED

View file

@ -123,7 +123,7 @@ class Temperature {
static uint8_t soft_pwm_amount[HOTENDS]; static uint8_t soft_pwm_amount[HOTENDS];
#if ENABLED(AUTO_POWER_E_FANS) #if ENABLED(AUTO_POWER_E_FANS)
static int16_t autofan_speed[HOTENDS]; static uint8_t autofan_speed[HOTENDS];
#endif #endif
#if ENABLED(FAN_SOFT_PWM) #if ENABLED(FAN_SOFT_PWM)