zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Added new menu items under the prepare submenu.

Browse source 
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
This commit is contained in:
Blair Thompson 2012-02-22 22:51:04 +00:00
parent ae3e7586c6
commit d9f2f509d5
5 changed files with 17 additions and 9 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Marlin/Configuration.h
View file

@ -26,7 +26,7 @@
// Gen7 v1.3 = 79
// Teensylu = 8,
// Gen3+ =9
#define MOTHERBOARD 7
#define MOTHERBOARD 33
//===========================================================================
//=============================Thermal Settings ============================
@ -44,7 +44,7 @@
// 6 is EPCOS 100k
// 7 is 100k Honeywell thermistor 135-104LAG-J01
#define TEMP_SENSOR_0 -1
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_BED 1
@ -129,7 +129,7 @@ const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of t
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
@ -194,6 +194,10 @@ const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of t
#define ULTRA_LCD
#define LCD_WIDTH 20
#define LCD_HEIGHT 4
#define PLA_PREHEAT_HOTEND_TEMP 180
#define PLA_PREHEAT_HPB_TEMP 70
#define ABS_PREHEAT_HOTEND_TEMP 240
#define ABS_PREHEAT_HPB_TEMP 100
#else //no panel but just lcd
#ifdef ULTRA_LCD
#define LCD_WIDTH 16

4
Marlin/Configuration_adv.h
View file

@ -74,7 +74,7 @@
#define X_HOME_RETRACT_MM 5
#define Y_HOME_RETRACT_MM 5
#define Z_HOME_RETRACT_MM 1
#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
#define AXIS_RELATIVE_MODES {false, false, false, false}
@ -152,7 +152,7 @@ const int dropsegments=5; //everything with less than this number of steps will
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
// be commented out otherwise
//#define SDCARDDETECTINVERTED
#define SDCARDDETECTINVERTED
//===========================================================================
//=============================Buffers ============================

BIN
Marlin/ipch/marlin-7ce658c4/marlin-4b8a948f.ipch
View file

Binary file not shown.

3
Marlin/language.h
View file

@ -22,7 +22,8 @@
#define MSG_DISABLE_STEPPERS " Disable Steppers"
#define MSG_AUTO_HOME " Auto Home"
#define MSG_SET_ORIGIN " Set Origin"
#define MSG_PREHEAT " Preheat"
#define MSG_PREHEAT_PLA " Preheat PLA"
#define MSG_PREHEAT_ABS " Preheat ABS"
#define MSG_COOLDOWN " Cooldown"
#define MSG_EXTRUDE " Extrude"
#define MSG_MOVE_AXIS " Move Axis \x7E"

9
Marlin/ultralcd.pde
View file

@ -456,7 +456,7 @@ void MainMenu::showStatus()
force_lcd_update=false;
}
enum {ItemP_exit, ItemP_autostart,ItemP_disstep,ItemP_home, ItemP_origin, ItemP_preheat, ItemP_cooldown,/*ItemP_extrude,*/ItemP_move};
enum {ItemP_exit, ItemP_autostart,ItemP_disstep,ItemP_home, ItemP_origin, ItemP_preheat_pla, ItemP_preheat_abs, ItemP_cooldown,/*ItemP_extrude,*/ItemP_move};
//any action must not contain a ',' character anywhere, or this breaks:
#define MENUITEM(repaint_action, click_action) \
@ -489,8 +489,11 @@ void MainMenu::showPrepare()
case ItemP_origin:
MENUITEM( lcdprintPGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
break;
case ItemP_preheat:
MENUITEM( lcdprintPGM(MSG_PREHEAT) , BLOCK;setTargetHotend0(170);setTargetBed(70);beepshort(); ) ;
case ItemP_preheat_pla:
MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(PLA_PREHEAT_HOTEND_TEMP);setTargetBed(PLA_PREHEAT_HPB_TEMP);beepshort(); ) ;
break;
case ItemP_preheat_abs:
MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(ABS_PREHEAT_HOTEND_TEMP);setTargetBed(ABS_PREHEAT_HPB_TEMP);beepshort(); ) ;
break;
case ItemP_cooldown:
MENUITEM( lcdprintPGM(MSG_COOLDOWN) , BLOCK;setTargetHotend0(0);setTargetBed(0);beepshort(); ) ;