Mask unused var, update (c) comments (#14455)

This commit is contained in:
Ludy 2019-07-01 05:29:33 +02:00 committed by Scott Lahteine
parent 0ca64a0ea3
commit dab2f0c89c
10 changed files with 11 additions and 42 deletions

View file

@ -24,8 +24,6 @@
/**
* InterruptVectors_Due.h
*
* Copyright (c) 2017 Eduardo José Tagle. All right reserved
*
* This module relocates the Interrupt vector table to SRAM, allowing new
* interrupt handlers to be added at runtime. This is required because the
* Arduino runtime steals interrupt handlers that Marlin MUST use to support

View file

@ -681,6 +681,8 @@
planner.synchronize();
gcode.process_subcommands_now_P(PSTR(Z_PROBE_END_SCRIPT));
}
#else
UNUSED(probe_deployed);
#endif
return;

View file

@ -22,23 +22,6 @@
/**
* stepper_dac.cpp - To set stepper current via DAC
*
* Part of Marlin
*
* Copyright (c) 2019 MarlinFirmware
*
* Marlin is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Marlin is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Marlin. If not, see <http://www.gnu.org/licenses/>.
*/
#include "../../inc/MarlinConfig.h"

View file

@ -26,8 +26,6 @@
* Stepper motor driver indirection to allow some stepper functions to
* be done via SPI/I2c instead of direct pin manipulation.
*
* Part of Marlin
*
* Copyright (c) 2015 Dominik Wenger
*/

View file

@ -22,24 +22,12 @@
#pragma once
/**
* stepper_indirection.h - stepper motor driver indirection macros
* to allow some stepper functions to be done via SPI/I2c instead of direct pin manipulation
* Part of Marlin
* stepper_indirection.h
*
* Stepper motor driver indirection to allow some stepper functions to
* be done via SPI/I2c instead of direct pin manipulation.
*
* Copyright (c) 2015 Dominik Wenger
*
* Marlin is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* at your option) any later version.
*
* Marlin is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with Marlin. If not, see <http://www.gnu.org/licenses/>.
*/
#include "../inc/MarlinConfig.h"

View file

@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm

View file

@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm

View file

@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm

View file

@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm

View file

@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm