From dc02d0720df318045e3ca6cdf5f27e6c39525829 Mon Sep 17 00:00:00 2001 From: Bob Kuhn Date: Fri, 5 Jul 2019 22:08:06 -0500 Subject: [PATCH] =?UTF-8?q?Pins=20Debugging=20for=20STM32=20=E2=80=94=20NE?= =?UTF-8?q?EDS=20TESTING=20(#14309)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/HAL/HAL_AVR/pinsDebug.h | 2 +- Marlin/src/HAL/HAL_DUE/pinsDebug.h | 4 +- Marlin/src/HAL/HAL_LINUX/pinsDebug.h | 4 +- Marlin/src/HAL/HAL_LPC1768/pinsDebug.h | 4 +- Marlin/src/HAL/HAL_STM32/pinsDebug.h | 35 +- .../HAL/HAL_STM32/pinsDebug_STM32GENERIC.h | 138 ++++ .../src/HAL/HAL_STM32/pinsDebug_STM32duino.h | 276 ++++++++ Marlin/src/HAL/HAL_STM32/pins_Xref.h | 612 ++++++++++++++++++ Marlin/src/HAL/HAL_STM32F1/pinsDebug.h | 114 +--- Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h | 2 +- Marlin/src/HAL/HAL_STM32F4/pinsDebug.h | 28 +- Marlin/src/HAL/HAL_STM32F7/pinsDebug.h | 28 +- Marlin/src/gcode/config/M43.cpp | 12 +- Marlin/src/pins/pinsDebug.h | 14 +- buildroot/share/atom/auto_build.py | 49 +- 15 files changed, 1172 insertions(+), 150 deletions(-) create mode 100644 Marlin/src/HAL/HAL_STM32/pinsDebug_STM32GENERIC.h create mode 100644 Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h create mode 100644 Marlin/src/HAL/HAL_STM32/pins_Xref.h diff --git a/Marlin/src/HAL/HAL_AVR/pinsDebug.h b/Marlin/src/HAL/HAL_AVR/pinsDebug.h index 4737c3517a..5dedbcadd3 100644 --- a/Marlin/src/HAL/HAL_AVR/pinsDebug.h +++ b/Marlin/src/HAL/HAL_AVR/pinsDebug.h @@ -400,4 +400,4 @@ static void pwm_details(uint8_t pin) { #endif -#define PRINT_PIN(p) do {sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer);} while (0) +#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0) diff --git a/Marlin/src/HAL/HAL_DUE/pinsDebug.h b/Marlin/src/HAL/HAL_DUE/pinsDebug.h index 23677960f0..e4da398cc2 100644 --- a/Marlin/src/HAL/HAL_DUE/pinsDebug.h +++ b/Marlin/src/HAL/HAL_DUE/pinsDebug.h @@ -63,8 +63,8 @@ #define digitalRead_mod(p) extDigitalRead(p) // AVR digitalRead disabled PWM before it read the pin #define PRINT_PORT(p) #define NAME_FORMAT(p) PSTR("%-##p##s") -#define PRINT_ARRAY_NAME(x) do {sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer);} while (0) -#define PRINT_PIN(p) do {sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer);} while (0) +#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0) +#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0) #define GET_ARRAY_PIN(p) pin_array[p].pin #define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital #define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL ? 1 : 0) diff --git a/Marlin/src/HAL/HAL_LINUX/pinsDebug.h b/Marlin/src/HAL/HAL_LINUX/pinsDebug.h index be4765a571..702a73bf7d 100644 --- a/Marlin/src/HAL/HAL_LINUX/pinsDebug.h +++ b/Marlin/src/HAL/HAL_LINUX/pinsDebug.h @@ -33,8 +33,8 @@ #define PRINT_PORT(p) #define GET_ARRAY_PIN(p) pin_array[p].pin #define NAME_FORMAT(p) PSTR("%-##p##s") -#define PRINT_ARRAY_NAME(x) do {sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer);} while (0) -#define PRINT_PIN(p) do {sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer);} while (0) +#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0) +#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0) #define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin // active ADC function/mode/code values for PINSEL registers diff --git a/Marlin/src/HAL/HAL_LPC1768/pinsDebug.h b/Marlin/src/HAL/HAL_LPC1768/pinsDebug.h index d14b14385c..99c4e38057 100644 --- a/Marlin/src/HAL/HAL_LPC1768/pinsDebug.h +++ b/Marlin/src/HAL/HAL_LPC1768/pinsDebug.h @@ -33,8 +33,8 @@ #define PRINT_PORT(p) #define GET_ARRAY_PIN(p) pin_array[p].pin #define NAME_FORMAT(p) PSTR("%-##p##s") -#define PRINT_ARRAY_NAME(x) do {sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer);} while (0) -#define PRINT_PIN(p) do {sprintf_P(buffer, PSTR("%d.%02d"), LPC1768_PIN_PORT(p), LPC1768_PIN_PIN(p)); SERIAL_ECHO(buffer);} while (0) +#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0) +#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%d.%02d"), LPC1768_PIN_PORT(p), LPC1768_PIN_PIN(p)); SERIAL_ECHO(buffer); }while(0) #define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin // pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities diff --git a/Marlin/src/HAL/HAL_STM32/pinsDebug.h b/Marlin/src/HAL/HAL_STM32/pinsDebug.h index 3759c2d6c3..4e27cee195 100644 --- a/Marlin/src/HAL/HAL_STM32/pinsDebug.h +++ b/Marlin/src/HAL/HAL_STM32/pinsDebug.h @@ -1 +1,34 @@ -#error "PINS_DEBUGGING is not yet supported for STM32!" +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#if !(defined(NUM_DIGITAL_PINS) || defined(BOARD_NR_GPIO_PINS)) + #error "M43 not supported for this board" +#endif + +// Strange - STM32F4 comes to HAL_STM32 rather than HAL_STM32F4 for these files +#ifdef STM32F4 + #ifdef NUM_DIGITAL_PINS // Only in ST's Arduino core (STM32duino, STM32Core) + #include "pinsDebug_STM32duino.h" + #elif defined(BOARD_NR_GPIO_PINS) // Only in STM32GENERIC (Maple) + #include "pinsDebug_STM32GENERIC.h" + #else + #error "M43 not supported for this board" + #endif +#endif diff --git a/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32GENERIC.h b/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32GENERIC.h new file mode 100644 index 0000000000..a323f7366b --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32GENERIC.h @@ -0,0 +1,138 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Support routines for STM32GENERIC (Maple) + */ + +/** + * Translation of routines & variables used by pinsDebug.h + */ + +#ifdef BOARD_NR_GPIO_PINS // Only in STM32GENERIC (Maple) + +#ifdef __STM32F1__ + #include "../HAL_STM32F1/fastio_STM32F1.h" +#elif defined(STM32F4) + #include "../HAL_STM32F4/fastio_STM32F4.h" +#elif defined(STM32F7) + #include "../HAL_STM32F7/fastio_STM32F7.h" +#endif + +extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS]; + +#define NUM_DIGITAL_PINS BOARD_NR_GPIO_PINS +#define NUMBER_PINS_TOTAL BOARD_NR_GPIO_PINS +#define VALID_PIN(pin) (pin >= 0 && pin < BOARD_NR_GPIO_PINS) +#define GET_ARRAY_PIN(p) pin_t(pin_array[p].pin) +#define pwm_status(pin) PWM_PIN(pin) +#define digitalRead_mod(p) extDigitalRead(p) +#define NAME_FORMAT(p) PSTR("%-##p##s") +#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); SERIAL_ECHO(buffer); }while(0) +#define PRINT_PORT(p) print_port(p) +#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0) +#define MULTI_NAME_PAD 20 // space needed to be pretty if not first name assigned to a pin + +// pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities +#ifndef M43_NEVER_TOUCH + #define M43_NEVER_TOUCH(Q) (Q >= 9 && Q <= 12) // SERIAL/USB pins PA9(TX) PA10(RX) +#endif + +static inline int8_t get_pin_mode(pin_t pin) { + return VALID_PIN(pin) ? _GET_MODE(pin) : -1; +} + +static inline pin_t DIGITAL_PIN_TO_ANALOG_PIN(pin_t pin) { + if (!VALID_PIN(pin)) return -1; + int8_t adc_channel = int8_t(PIN_MAP[pin].adc_channel); + #ifdef NUM_ANALOG_INPUTS + if (adc_channel >= NUM_ANALOG_INPUTS) adc_channel = ADCx; + #endif + return pin_t(adc_channel); +} + +static inline bool IS_ANALOG(pin_t pin) { + if (!VALID_PIN(pin)) return false; + if (PIN_MAP[pin].adc_channel != ADCx) { + #ifdef NUM_ANALOG_INPUTS + if (PIN_MAP[pin].adc_channel >= NUM_ANALOG_INPUTS) return false; + #endif + return _GET_MODE(pin) == GPIO_INPUT_ANALOG && !M43_NEVER_TOUCH(pin); + } + return false; +} + +static inline bool GET_PINMODE(const pin_t pin) { + return VALID_PIN(pin) && !IS_INPUT(pin); +} + +static inline bool GET_ARRAY_IS_DIGITAL(const int16_t array_pin) { + const pin_t pin = GET_ARRAY_PIN(array_pin); + return (!IS_ANALOG(pin) + #ifdef NUM_ANALOG_INPUTS + || PIN_MAP[pin].adc_channel >= NUM_ANALOG_INPUTS + #endif + ); +} + +static inline void pwm_details(const pin_t pin) { + if (PWM_PIN(pin)) { + timer_dev * const tdev = PIN_MAP[pin].timer_device; + const uint8_t channel = PIN_MAP[pin].timer_channel; + const char num = ( + #ifdef STM32_HIGH_DENSITY + tdev == &timer8 ? '8' : + tdev == &timer5 ? '5' : + #endif + tdev == &timer4 ? '4' : + tdev == &timer3 ? '3' : + tdev == &timer2 ? '2' : + tdev == &timer1 ? '1' : '?' + ); + char buffer[10]; + sprintf_P(buffer, PSTR(" TIM%c CH%c"), num, ('0' + channel)); + SERIAL_ECHO(buffer); + } +} + +static inline void print_port(pin_t pin) { + const char port = 'A' + char(pin >> 4); // pin div 16 + /* seems not to be required for our devices + gpio_dev * const gp = PIN_MAP[pin].gpio_device; + const char port = ( + #if STM32_NR_GPIO_PORTS > 4 + gp == &gpiog ? 'G' : + gp == &gpiof ? 'F' : + gp == &gpioe ? 'E' : + #endif + gp == &gpiod ? 'D' : + gp == &gpioc ? 'C' : + gp == &gpiob ? 'B' : + gp == &gpioa ? 'A' : '?' + ); + */ + const int16_t gbit = PIN_MAP[pin].gpio_bit; + char buffer[6]; + sprintf_P(buffer, PSTR("P%c%hd "), port, gbit); + if (gbit < 10) SERIAL_CHAR(' '); + SERIAL_ECHO(buffer); +} + +#endif // BOARD_NR_GPIO_PINS diff --git a/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h b/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h new file mode 100644 index 0000000000..2e003ea567 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/pinsDebug_STM32duino.h @@ -0,0 +1,276 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include + +#ifdef NUM_DIGITAL_PINS // Only in ST's Arduino core (STM32duino, STM32Core) + +/** + * Life gets complicated if you want an easy to use 'M43 I' output (in port/pin order) + * because the variants in this platform do not always define all the I/O port/pins + * that a CPU has. + * + * VARIABLES: + * Ard_num - Arduino pin number - defined by the platform. It is used by digitalRead and + * digitalWrite commands and by M42. + * - does not contain port/pin info + * - is not in port/pin order + * - typically a variant will only assign Ard_num to port/pins that are actually used + * Index - M43 counter - only used to get Ard_num + * x - a parameter/argument used to search the pin_array to try to find a signal name + * associated with a Ard_num + * Port_pin - port number and pin number for use with CPU registers and printing reports + * + * Since M43 uses digitalRead and digitalWrite commands, only the Port_pins with an Ard_num + * are accessed and/or displayed. + * + * Three arrays are used. + * + * digitalPin[] is provided by the platform. It consists of the Port_pin numbers in + * Arduino pin number order. + * + * pin_array is a structure generated by the pins/pinsDebug.h header file. It is generated by + * the preprocessor. Only the signals associated with enabled options are in this table. + * It contains: + * - name of the signal + * - the Ard_num assigned by the pins_YOUR_BOARD.h file using the platform defines. + * EXAMPLE: "#define KILL_PIN PB1" results in Ard_num of 57. 57 is then used as an + * index into digitalPin[] to get the Port_pin number + * - if it is a digital or analog signal. PWMs are considered digital here. + * + * pin_xref is a structure generated by this header file. It is generated by the + * preprocessor. It is in port/pin order. It contains just the port/pin numbers defined by the + * platform for this variant. + * - Ard_num + * - printable version of Port_pin + * + * Routines with an "x" as a parameter/argument are used to search the pin_array to try to + * find a signal name associated with a port/pin. + * + * NOTE - the Arduino pin number is what is used by the M42 command, NOT the port/pin for that + * signal. The Arduino pin number is listed by the M43 I command. + */ + +extern const PinName digitalPin[]; // provided by the platform + +//////////////////////////////////////////////////////// +// +// make a list of the Arduino pin numbers in the Port/Pin order +// + +#define _PIN_ADD_2(NAME_ALPHA, ARDUINO_NUM) { {NAME_ALPHA}, ARDUINO_NUM }, +#define _PIN_ADD(NAME_ALPHA, ARDUINO_NUM) { NAME_ALPHA, ARDUINO_NUM }, +#define PIN_ADD(NAME) _PIN_ADD(#NAME, NAME) + +typedef struct { + char Port_pin_alpha[5]; + pin_t Ard_num; +} XrefInfo; + +const XrefInfo pin_xref[] PROGMEM = { + #include "pins_Xref.h" +}; + +//////////////////////////////////////////////////////////// + +#define MODE_PIN_INPUT 0 // Input mode (reset state) +#define MODE_PIN_OUTPUT 1 // General purpose output mode +#define MODE_PIN_ALT 2 // Alternate function mode +#define MODE_PIN_ANALOG 3 // Analog mode + +#define PIN_NUM(P) (P & 0x000F) +#define PIN_NUM_ALPHA_LEFT(P) (((P & 0x000F) < 10) ? ('0' + (P & 0x000F)) : '1') +#define PIN_NUM_ALPHA_RIGHT(P) (((P & 0x000F) > 9) ? ('0' + (P & 0x000F) - 10) : 0 ) +#define PORT_NUM(P) ((P >> 4) & 0x0007) +#define PORT_ALPHA(P) ('A' + (P >> 4)) + +/** + * Translation of routines & variables used by pinsDebug.h + */ +#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS +#define VALID_PIN(ANUM) ((ANUM) >= 0 && (ANUM) < NUMBER_PINS_TOTAL) +#define digitalRead_mod(Ard_num) extDigitalRead(Ard_num) // must use Arduino pin numbers when doing reads +#define NAME_FORMAT(p) PSTR("%-##p##s") +#define PRINT_PIN(Q) +#define PRINT_PORT(ANUM) port_print(ANUM) +#define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1 // will report analog pin number in the print port routine +#define GET_PIN_MAP_PIN_M43(Index) pin_xref[Index].Ard_num + +// x is a variable used to search pin_array +#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital) +#define GET_ARRAY_PIN(x) ((pin_t) pin_array[x].pin) +#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0) +#define MULTI_NAME_PAD 33 // space needed to be pretty if not first name assigned to a pin + +#ifndef M43_NEVER_TOUCH + #define _M43_NEVER_TOUCH(Index) (Index >= 9 && Index <= 12) // SERIAL/USB pins: PA9(TX) PA10(RX) PA11(USB_DM) PA12(USB_DP) + #ifdef KILL_PIN + #define M43_NEVER_TOUCH(Index) m43_never_touch(Index) + + bool m43_never_touch(const pin_t Index) { + static pin_t M43_kill_index = -1; + if (M43_kill_index < 0) + for (M43_kill_index = 0; M43_kill_index < NUMBER_PINS_TOTAL; M43_kill_index++) + if (KILL_PIN == GET_PIN_MAP_PIN_M43(M43_kill_index)) break; + return _M43_NEVER_TOUCH(Index) || Index == M43_kill_index; // KILL_PIN and SERIAL/USB + } + #else + #define M43_NEVER_TOUCH(Index) _M43_NEVER_TOUCH(Index) + #endif +#endif + +uint8_t get_pin_mode(const pin_t Ard_num) { + uint32_t mode_all = 0; + const PinName dp = digitalPin[Ard_num]; + switch (PORT_ALPHA(dp)) { + case 'A' : mode_all = GPIOA->MODER; break; + case 'B' : mode_all = GPIOB->MODER; break; + case 'C' : mode_all = GPIOC->MODER; break; + case 'D' : mode_all = GPIOD->MODER; break; + #ifdef PE_0 + case 'E' : mode_all = GPIOE->MODER; break; + #elif defined (PF_0) + case 'F' : mode_all = GPIOF->MODER; break; + #elif defined (PG_0) + case 'G' : mode_all = GPIOG->MODER; break; + #elif defined (PH_0) + case 'H' : mode_all = GPIOH->MODER; break; + #elif defined (PI_0) + case 'I' : mode_all = GPIOI->MODER; break; + #elif defined (PJ_0) + case 'J' : mode_all = GPIOJ->MODER; break; + #elif defined (PK_0) + case 'K' : mode_all = GPIOK->MODER; break; + #elif defined (PL_0) + case 'L' : mode_all = GPIOL->MODER; break; + #endif + } + return (mode_all >> (2 * uint8_t(PIN_NUM(dp)))) & 0x03; +} + +bool GET_PINMODE(const pin_t Ard_num) { + const uint8_t pin_mode = get_pin_mode(Ard_num); + return pin_mode == MODE_PIN_OUTPUT || pin_mode == MODE_PIN_ALT; // assume all alt definitions are PWM +} + +int8_t digital_pin_to_analog_pin(pin_t Ard_num) { + Ard_num -= NUM_ANALOG_FIRST; + return (Ard_num >= 0 && Ard_num < NUM_ANALOG_INPUTS) ? Ard_num : -1; +} + +bool IS_ANALOG(const pin_t Ard_num) { + return get_pin_mode(Ard_num) == MODE_PIN_ANALOG; +} + +bool is_digital(const pin_t x) { + const uint8_t pin_mode = get_pin_mode(pin_array[x].pin); + return pin_mode == MODE_PIN_INPUT || pin_mode == MODE_PIN_OUTPUT; +} + +void port_print(const pin_t Ard_num) { + char buffer[16]; + pin_t Index; + for (Index = 0; Index < NUMBER_PINS_TOTAL; Index++) + if (Ard_num == GET_PIN_MAP_PIN_M43(Index)) break; + + char * const ppa = pin_xref[Index].Port_pin_alpha; + sprintf_P(buffer, PSTR("%s"), ppa); + SERIAL_ECHO(buffer); + if (ppa[3] == '\0') SERIAL_CHAR(' '); + + // print analog pin number + const int8_t Port_pin = digital_pin_to_analog_pin(Ard_num); + if (Port_pin >= 0) { + sprintf_P(buffer, PSTR(" (A%d) "), Port_pin); + SERIAL_ECHO(buffer); + if (Port_pin < 10) SERIAL_CHAR(' '); + } + else + SERIAL_ECHO_SP(7); + + // Print number to be used with M42 + sprintf_P(buffer, PSTR(" M42 P%d "), Ard_num); + SERIAL_ECHO(buffer); + if (Ard_num < 10) SERIAL_CHAR(' '); + if (Ard_num < 100) SERIAL_CHAR(' '); +} + +bool pwm_status(const pin_t Ard_num) { + return get_pin_mode(Ard_num) == MODE_PIN_ALT; +} + +void pwm_details(const pin_t Ard_num) { + if (pwm_status(Ard_num)) { + uint32_t alt_all = 0; + const PinName dp = digitalPin[Ard_num]; + pin_t pin_number = uint8_t(PIN_NUM(dp)); + const bool over_7 = pin_number >= 8; + const uint8_t ind = over_7 ? 1 : 0; + switch (PORT_ALPHA(dp)) { // get alt function + case 'A' : alt_all = GPIOA->AFR[ind]; break; + case 'B' : alt_all = GPIOB->AFR[ind]; break; + case 'C' : alt_all = GPIOC->AFR[ind]; break; + case 'D' : alt_all = GPIOD->AFR[ind]; break; + #ifdef PE_0 + case 'E' : alt_all = GPIOE->AFR[ind]; break; + #elif defined (PF_0) + case 'F' : alt_all = GPIOF->AFR[ind]; break; + #elif defined (PG_0) + case 'G' : alt_all = GPIOG->AFR[ind]; break; + #elif defined (PH_0) + case 'H' : alt_all = GPIOH->AFR[ind]; break; + #elif defined (PI_0) + case 'I' : alt_all = GPIOI->AFR[ind]; break; + #elif defined (PJ_0) + case 'J' : alt_all = GPIOJ->AFR[ind]; break; + #elif defined (PK_0) + case 'K' : alt_all = GPIOK->AFR[ind]; break; + #elif defined (PL_0) + case 'L' : alt_all = GPIOL->AFR[ind]; break; + #endif + } + if (over_7) pin_number -= 8; + + uint8_t alt_func = (alt_all >> (4 * pin_number)) & 0x0F; + SERIAL_ECHOPAIR("Alt Function: ", alt_func); + if (alt_func < 10) SERIAL_CHAR(' '); + SERIAL_ECHOPGM(" - "); + switch (alt_func) { + case 0 : SERIAL_ECHOPGM("system (misc. I/O)"); break; + case 1 : SERIAL_ECHOPGM("TIM1/TIM2 (probably PWM)"); break; + case 2 : SERIAL_ECHOPGM("TIM3..5 (probably PWM)"); break; + case 3 : SERIAL_ECHOPGM("TIM8..11 (probably PWM)"); break; + case 4 : SERIAL_ECHOPGM("I2C1..3"); break; + case 5 : SERIAL_ECHOPGM("SPI1/SPI2"); break; + case 6 : SERIAL_ECHOPGM("SPI3"); break; + case 7 : SERIAL_ECHOPGM("USART1..3"); break; + case 8 : SERIAL_ECHOPGM("USART4..6"); break; + case 9 : SERIAL_ECHOPGM("CAN1/CAN2, TIM12..14 (probably PWM)"); break; + case 10 : SERIAL_ECHOPGM("OTG"); break; + case 11 : SERIAL_ECHOPGM("ETH"); break; + case 12 : SERIAL_ECHOPGM("FSMC, SDIO, OTG"); break; + case 13 : SERIAL_ECHOPGM("DCMI"); break; + case 14 : SERIAL_ECHOPGM("unused (shouldn't see this)"); break; + case 15 : SERIAL_ECHOPGM("EVENTOUT"); break; + } + } +} // pwm_details + +#endif // NUM_DIGITAL_PINS diff --git a/Marlin/src/HAL/HAL_STM32/pins_Xref.h b/Marlin/src/HAL/HAL_STM32/pins_Xref.h new file mode 100644 index 0000000000..84278c3916 --- /dev/null +++ b/Marlin/src/HAL/HAL_STM32/pins_Xref.h @@ -0,0 +1,612 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// +// make a list of the Arduino pin numbers in the Port/Pin order +// +#ifdef PA0 + PIN_ADD(PA0) +#endif +#ifdef PA1 + PIN_ADD(PA1) +#endif +#ifdef PA2 + PIN_ADD(PA2) +#endif +#ifdef PA3 + PIN_ADD(PA3) +#endif +#ifdef PA4 + PIN_ADD(PA4) +#endif +#ifdef PA5 + PIN_ADD(PA5) +#endif +#ifdef PA6 + PIN_ADD(PA6) +#endif +#ifdef PA7 + PIN_ADD(PA7) +#endif +#ifdef PA8 + PIN_ADD(PA8) +#endif +#ifdef PA9 + PIN_ADD(PA9) +#endif +#ifdef PA10 + PIN_ADD(PA10) +#endif +#ifdef PA11 + PIN_ADD(PA11) +#endif +#ifdef PA12 + PIN_ADD(PA12) +#endif +#ifdef PA13 + PIN_ADD(PA13) +#endif +#ifdef PA14 + PIN_ADD(PA14) +#endif +#ifdef PA15 + PIN_ADD(PA15) +#endif + +#ifdef PB0 + PIN_ADD(PB0) +#endif +#ifdef PB1 + PIN_ADD(PB1) +#endif +#ifdef PB2 + PIN_ADD(PB2) +#endif +#ifdef PB3 + PIN_ADD(PB3) +#endif +#ifdef PB4 + PIN_ADD(PB4) +#endif +#ifdef PB5 + PIN_ADD(PB5) +#endif +#ifdef PB6 + PIN_ADD(PB6) +#endif +#ifdef PB7 + PIN_ADD(PB7) +#endif +#ifdef PB8 + PIN_ADD(PB8) +#endif +#ifdef PB9 + PIN_ADD(PB9) +#endif +#ifdef PB10 + PIN_ADD(PB10) +#endif +#ifdef PB11 + PIN_ADD(PB11) +#endif +#ifdef PB12 + PIN_ADD(PB12) +#endif +#ifdef PB13 + PIN_ADD(PB13) +#endif +#ifdef PB14 + PIN_ADD(PB14) +#endif +#ifdef PB15 + PIN_ADD(PB15) +#endif + +#ifdef PC0 + PIN_ADD(PC0) +#endif +#ifdef PC1 + PIN_ADD(PC1) +#endif +#ifdef PC2 + PIN_ADD(PC2) +#endif +#ifdef PC3 + PIN_ADD(PC3) +#endif +#ifdef PC4 + PIN_ADD(PC4) +#endif +#ifdef PC5 + PIN_ADD(PC5) +#endif +#ifdef PC6 + PIN_ADD(PC6) +#endif +#ifdef PC7 + PIN_ADD(PC7) +#endif +#ifdef PC8 + PIN_ADD(PC8) +#endif +#ifdef PC9 + PIN_ADD(PC9) +#endif +#ifdef PC10 + PIN_ADD(PC10) +#endif +#ifdef PC11 + PIN_ADD(PC11) +#endif +#ifdef PC12 + PIN_ADD(PC12) +#endif +#ifdef PC13 + PIN_ADD(PC13) +#endif +#ifdef PC14 + PIN_ADD(PC14) +#endif +#ifdef PC15 + PIN_ADD(PC15) +#endif + +#ifdef PD0 + PIN_ADD(PD0) +#endif +#ifdef PD1 + PIN_ADD(PD1) +#endif +#ifdef PD2 + PIN_ADD(PD2) +#endif +#ifdef PD3 + PIN_ADD(PD3) +#endif +#ifdef PD4 + PIN_ADD(PD4) +#endif +#ifdef PD5 + PIN_ADD(PD5) +#endif +#ifdef PD6 + PIN_ADD(PD6) +#endif +#ifdef PD7 + PIN_ADD(PD7) +#endif +#ifdef PD8 + PIN_ADD(PD8) +#endif +#ifdef PD9 + PIN_ADD(PD9) +#endif +#ifdef PD10 + PIN_ADD(PD10) +#endif +#ifdef PD11 + PIN_ADD(PD11) +#endif +#ifdef PD12 + PIN_ADD(PD12) +#endif +#ifdef PD13 + PIN_ADD(PD13) +#endif +#ifdef PD14 + PIN_ADD(PD14) +#endif +#ifdef PD15 + PIN_ADD(PD15) +#endif + +#ifdef PE0 + PIN_ADD(PE0) +#endif +#ifdef PE1 + PIN_ADD(PE1) +#endif +#ifdef PE2 + PIN_ADD(PE2) +#endif +#ifdef PE3 + PIN_ADD(PE3) +#endif +#ifdef PE4 + PIN_ADD(PE4) +#endif +#ifdef PE5 + PIN_ADD(PE5) +#endif +#ifdef PE6 + PIN_ADD(PE6) +#endif +#ifdef PE7 + PIN_ADD(PE7) +#endif +#ifdef PE8 + PIN_ADD(PE8) +#endif +#ifdef PE9 + PIN_ADD(PE9) +#endif +#ifdef PE10 + PIN_ADD(PE10) +#endif +#ifdef PE11 + PIN_ADD(PE11) +#endif +#ifdef PE12 + PIN_ADD(PE12) +#endif +#ifdef PE13 + PIN_ADD(PE13) +#endif +#ifdef PE14 + PIN_ADD(PE14) +#endif +#ifdef PE15 + PIN_ADD(PE15) +#endif + +#ifdef PF0 + PIN_ADD(PF0) +#endif +#ifdef PF1 + PIN_ADD(PF1) +#endif +#ifdef PF2 + PIN_ADD(PF2) +#endif +#ifdef PF3 + PIN_ADD(PF3) +#endif +#ifdef PF4 + PIN_ADD(PF4) +#endif +#ifdef PF5 + PIN_ADD(PF5) +#endif +#ifdef PF6 + PIN_ADD(PF6) +#endif +#ifdef PF7 + PIN_ADD(PF7) +#endif +#ifdef PF8 + PIN_ADD(PF8) +#endif +#ifdef PF9 + PIN_ADD(PF9) +#endif +#ifdef PF10 + PIN_ADD(PF10) +#endif +#ifdef PF11 + PIN_ADD(PF11) +#endif +#ifdef PF12 + PIN_ADD(PF12) +#endif +#ifdef PF13 + PIN_ADD(PF13) +#endif +#ifdef PF14 + PIN_ADD(PF14) +#endif +#ifdef PF15 + PIN_ADD(PF15) +#endif + +#ifdef PG0 + PIN_ADD(PG0) +#endif +#ifdef PG1 + PIN_ADD(PG1) +#endif +#ifdef PG2 + PIN_ADD(PG2) +#endif +#ifdef PG3 + PIN_ADD(PG3) +#endif +#ifdef PG4 + PIN_ADD(PG4) +#endif +#ifdef PG5 + PIN_ADD(PG5) +#endif +#ifdef PG6 + PIN_ADD(PG6) +#endif +#ifdef PG7 + PIN_ADD(PG7) +#endif +#ifdef PG8 + PIN_ADD(PG8) +#endif +#ifdef PG9 + PIN_ADD(PG9) +#endif +#ifdef PG10 + PIN_ADD(PG10) +#endif +#ifdef PG11 + PIN_ADD(PG11) +#endif +#ifdef PG12 + PIN_ADD(PG12) +#endif +#ifdef PG13 + PIN_ADD(PG13) +#endif +#ifdef PG14 + PIN_ADD(PG14) +#endif +#ifdef PG15 + PIN_ADD(PG15) +#endif + +#ifdef PH0 + PIN_ADD(PH0) +#endif +#ifdef PH1 + PIN_ADD(PH1) +#endif +#ifdef PH2 + PIN_ADD(PH2) +#endif +#ifdef PH3 + PIN_ADD(PH3) +#endif +#ifdef PH4 + PIN_ADD(PH4) +#endif +#ifdef PH5 + PIN_ADD(PH5) +#endif +#ifdef PH6 + PIN_ADD(PH6) +#endif +#ifdef PH7 + PIN_ADD(PH7) +#endif +#ifdef PH8 + PIN_ADD(PH8) +#endif +#ifdef PH9 + PIN_ADD(PH9) +#endif +#ifdef PH10 + PIN_ADD(PH10) +#endif +#ifdef PH11 + PIN_ADD(PH11) +#endif +#ifdef PH12 + PIN_ADD(PH12) +#endif +#ifdef PH13 + PIN_ADD(PH13) +#endif +#ifdef PH14 + PIN_ADD(PH14) +#endif +#ifdef PH15 + PIN_ADD(PH15) +#endif + +#ifdef PI0 + PIN_ADD(PI0) +#endif +#ifdef PI1 + PIN_ADD(PI1) +#endif +#ifdef PI2 + PIN_ADD(PI2) +#endif +#ifdef PI3 + PIN_ADD(PI3) +#endif +#ifdef PI4 + PIN_ADD(PI4) +#endif +#ifdef PI5 + PIN_ADD(PI5) +#endif +#ifdef PI6 + PIN_ADD(PI6) +#endif +#ifdef PI7 + PIN_ADD(PI7) +#endif +#ifdef PI8 + PIN_ADD(PI8) +#endif +#ifdef PI9 + PIN_ADD(PI9) +#endif +#ifdef PI10 + PIN_ADD(PI10) +#endif +#ifdef PI11 + PIN_ADD(PI11) +#endif +#ifdef PI12 + PIN_ADD(PI12) +#endif +#ifdef PI13 + PIN_ADD(PI13) +#endif +#ifdef PI14 + PIN_ADD(PI14) +#endif +#ifdef PI15 + PIN_ADD(PI15) +#endif + +#ifdef PJ0 + PIN_ADD(PJ0) +#endif +#ifdef PJ1 + PIN_ADD(PJ1) +#endif +#ifdef PJ2 + PIN_ADD(PJ2) +#endif +#ifdef PJ3 + PIN_ADD(PJ3) +#endif +#ifdef PJ4 + PIN_ADD(PJ4) +#endif +#ifdef PJ5 + PIN_ADD(PJ5) +#endif +#ifdef PJ6 + PIN_ADD(PJ6) +#endif +#ifdef PJ7 + PIN_ADD(PJ7) +#endif +#ifdef PJ8 + PIN_ADD(PJ8) +#endif +#ifdef PJ9 + PIN_ADD(PJ9) +#endif +#ifdef PJ10 + PIN_ADD(PJ10) +#endif +#ifdef PJ11 + PIN_ADD(PJ11) +#endif +#ifdef PJ12 + PIN_ADD(PJ12) +#endif +#ifdef PJ13 + PIN_ADD(PJ13) +#endif +#ifdef PJ14 + PIN_ADD(PJ14) +#endif +#ifdef PJ15 + PIN_ADD(PJ15) +#endif + +#ifdef PK0 + PIN_ADD(PK0) +#endif +#ifdef PK1 + PIN_ADD(PK1) +#endif +#ifdef PK2 + PIN_ADD(PK2) +#endif +#ifdef PK3 + PIN_ADD(PK3) +#endif +#ifdef PK4 + PIN_ADD(PK4) +#endif +#ifdef PK5 + PIN_ADD(PK5) +#endif +#ifdef PK6 + PIN_ADD(PK6) +#endif +#ifdef PK7 + PIN_ADD(PK7) +#endif +#ifdef PK8 + PIN_ADD(PK8) +#endif +#ifdef PK9 + PIN_ADD(PK9) +#endif +#ifdef PK10 + PIN_ADD(PK10) +#endif +#ifdef PK11 + PIN_ADD(PK11) +#endif +#ifdef PK12 + PIN_ADD(PK12) +#endif +#ifdef PK13 + PIN_ADD(PK13) +#endif +#ifdef PK14 + PIN_ADD(PK14) +#endif +#ifdef PK15 + PIN_ADD(PK15) +#endif + +#ifdef PL0 + PIN_ADD(PL0) +#endif +#ifdef PL1 + PIN_ADD(PL1) +#endif +#ifdef PL2 + PIN_ADD(PL2) +#endif +#ifdef PL3 + PIN_ADD(PL3) +#endif +#ifdef PL4 + PIN_ADD(PL4) +#endif +#ifdef PL5 + PIN_ADD(PL5) +#endif +#ifdef PL6 + PIN_ADD(PL6) +#endif +#ifdef PL7 + PIN_ADD(PL7) +#endif +#ifdef PL8 + PIN_ADD(PL8) +#endif +#ifdef PL9 + PIN_ADD(PL9) +#endif +#ifdef PL10 + PIN_ADD(PL10) +#endif +#ifdef PL11 + PIN_ADD(PL11) +#endif +#ifdef PL12 + PIN_ADD(PL12) +#endif +#ifdef PL13 + PIN_ADD(PL13) +#endif +#ifdef PL14 + PIN_ADD(PL14) +#endif +#ifdef PL15 + PIN_ADD(PL15) +#endif diff --git a/Marlin/src/HAL/HAL_STM32F1/pinsDebug.h b/Marlin/src/HAL/HAL_STM32F1/pinsDebug.h index b7f75343a2..a8b632870a 100644 --- a/Marlin/src/HAL/HAL_STM32F1/pinsDebug.h +++ b/Marlin/src/HAL/HAL_STM32F1/pinsDebug.h @@ -16,112 +16,12 @@ * along with this program. If not, see . * */ +#pragma once -/** - * Support routines for STM32F1 - */ -#ifdef __STM32F1__ - -/** - * Translation of routines & variables used by pinsDebug.h - */ -#include "fastio_STM32F1.h" - -extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS]; - -#define NUM_DIGITAL_PINS BOARD_NR_GPIO_PINS -#define NUMBER_PINS_TOTAL BOARD_NR_GPIO_PINS -#define VALID_PIN(pin) (pin >= 0 && pin < BOARD_NR_GPIO_PINS) -#define GET_ARRAY_PIN(p) pin_t(pin_array[p].pin) -#define pwm_status(pin) PWM_PIN(pin) -#define digitalRead_mod(p) extDigitalRead(p) -#define NAME_FORMAT(p) PSTR("%-##p##s") -#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); SERIAL_ECHO(buffer); }while(0) -#define PRINT_PORT(p) print_port(p) -#define PRINT_ARRAY_NAME(x) do {sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer);} while (0) -#define MULTI_NAME_PAD 20 // spaces needed to be pretty if not first name assigned to a pin - -// pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities -#ifndef M43_NEVER_TOUCH - #define M43_NEVER_TOUCH(Q) (Q >= 9 && Q <= 12) // SERIAL/USB pins PA9(TX) PA10(RX) +#ifdef NUM_DIGITAL_PINS // Only in ST's Arduino core (STM32duino, STM32Core) + #include "../HAL_STM32/pinsDebug_STM32duino.h" +#elif defined(BOARD_NR_GPIO_PINS) // Only in STM32GENERIC (Maple) + #include "../HAL_STM32/pinsDebug_STM32GENERIC.h" +#else + #error "M43 not supported for this board" #endif - -static inline int8_t get_pin_mode(pin_t pin) { - return VALID_PIN(pin) ? _GET_MODE(pin) : -1; -} - -static inline pin_t DIGITAL_PIN_TO_ANALOG_PIN(pin_t pin) { - if (!VALID_PIN(pin)) return -1; - int8_t adc_channel = int8_t(PIN_MAP[pin].adc_channel); - #ifdef NUM_ANALOG_INPUTS - if (adc_channel >= NUM_ANALOG_INPUTS) adc_channel = ADCx; - #endif - return pin_t(adc_channel); -} - -static inline bool IS_ANALOG(pin_t pin) { - if (!VALID_PIN(pin)) return false; - if (PIN_MAP[pin].adc_channel != ADCx) { - #ifdef NUM_ANALOG_INPUTS - if (PIN_MAP[pin].adc_channel >= NUM_ANALOG_INPUTS) return false; - #endif - return _GET_MODE(pin) == GPIO_INPUT_ANALOG && !M43_NEVER_TOUCH(pin); - } - return false; -} - -static inline bool GET_PINMODE(pin_t pin) { - return VALID_PIN(pin) ? !IS_INPUT(pin) : false; -} - -static inline bool GET_ARRAY_IS_DIGITAL(int16_t array_pin) { - pin_t pin = GET_ARRAY_PIN(array_pin); - bool isDigital = !IS_ANALOG(pin); - #ifdef NUM_ANALOG_INPUTS - if (!isDigital && PIN_MAP[pin].adc_channel >= NUM_ANALOG_INPUTS) - isDigital = true; - #endif - return isDigital; -} - -static inline void pwm_details(pin_t pin) { - if (PWM_PIN(pin)) { - char buffer[16], num = '?'; - timer_dev * const tdev = PIN_MAP[pin].timer_device; - const uint8_t channel = PIN_MAP[pin].timer_channel; - if (tdev == &timer1) num = '1'; - else if (tdev == &timer1) num = '1'; - else if (tdev == &timer2) num = '2'; - else if (tdev == &timer3) num = '3'; - else if (tdev == &timer4) num = '4'; - #ifdef STM32_HIGH_DENSITY - else if (tdev == &timer5) num = '5'; - else if (tdev == &timer8) num = '8'; - #endif - sprintf_P(buffer, PSTR(" TIM%c CH%c"), num, ('0' + channel)); - SERIAL_ECHO(buffer); - } -} - -static inline void print_port(pin_t pin) { - char buffer[8]; - char port = 'A' + char(pin >> 4); // pin div 16 - /* seems not to be required for our devices - gpio_dev* gp = PIN_MAP[pin].gpio_device; - if (gp == &gpioa) port = 'A'; - else if (gp == &gpiob) port = 'B'; - else if (gp == &gpioc) port = 'C'; - else if (gp == &gpiod) port = 'D'; - #if STM32_NR_GPIO_PORTS > 4 - else if (gp == &gpioe) port = 'E'; - else if (gp == &gpiof) port = 'F'; - else if (gp == &gpiog) port = 'G'; - #endif - */ - const int16_t gbit = PIN_MAP[pin].gpio_bit; - sprintf_P(buffer, PSTR("P%c%hd "), port, gbit); - if (gbit < 10) SERIAL_CHAR(' '); - SERIAL_ECHO(buffer); -} - -#endif // __STM32F1__ diff --git a/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h b/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h index a657d2c747..56615564cb 100644 --- a/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h +++ b/Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h @@ -65,7 +65,7 @@ #define PORTD 3 #define PORTE 4 -#define _STM32_PIN(_PORT,_PIN) ((PORT##_PORT * 16) + _PIN) +#define _STM32_PIN(P,PN) ((PORT##P * 16) + PN) #define PA0 _STM32_PIN(A, 0) #define PA1 _STM32_PIN(A, 1) diff --git a/Marlin/src/HAL/HAL_STM32F4/pinsDebug.h b/Marlin/src/HAL/HAL_STM32F4/pinsDebug.h index e5022f79a4..a8b632870a 100644 --- a/Marlin/src/HAL/HAL_STM32F4/pinsDebug.h +++ b/Marlin/src/HAL/HAL_STM32F4/pinsDebug.h @@ -1 +1,27 @@ -#error Debug pins is not supported on this Platform! +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#ifdef NUM_DIGITAL_PINS // Only in ST's Arduino core (STM32duino, STM32Core) + #include "../HAL_STM32/pinsDebug_STM32duino.h" +#elif defined(BOARD_NR_GPIO_PINS) // Only in STM32GENERIC (Maple) + #include "../HAL_STM32/pinsDebug_STM32GENERIC.h" +#else + #error "M43 not supported for this board" +#endif diff --git a/Marlin/src/HAL/HAL_STM32F7/pinsDebug.h b/Marlin/src/HAL/HAL_STM32F7/pinsDebug.h index e5022f79a4..a8b632870a 100644 --- a/Marlin/src/HAL/HAL_STM32F7/pinsDebug.h +++ b/Marlin/src/HAL/HAL_STM32F7/pinsDebug.h @@ -1 +1,27 @@ -#error Debug pins is not supported on this Platform! +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#ifdef NUM_DIGITAL_PINS // Only in ST's Arduino core (STM32duino, STM32Core) + #include "../HAL_STM32/pinsDebug_STM32duino.h" +#elif defined(BOARD_NR_GPIO_PINS) // Only in STM32GENERIC (Maple) + #include "../HAL_STM32/pinsDebug_STM32GENERIC.h" +#else + #error "M43 not supported for this board" +#endif diff --git a/Marlin/src/gcode/config/M43.cpp b/Marlin/src/gcode/config/M43.cpp index 79428158e0..8909397b32 100644 --- a/Marlin/src/gcode/config/M43.cpp +++ b/Marlin/src/gcode/config/M43.cpp @@ -42,6 +42,10 @@ #include "../../feature/host_actions.h" #endif +#ifndef GET_PIN_MAP_PIN_M43 + #define GET_PIN_MAP_PIN_M43(Q) GET_PIN_MAP_PIN(Q) +#endif + inline void toggle_pins() { const bool ignore_protection = parser.boolval('I'); const int repeat = parser.intval('R', 1), @@ -50,7 +54,7 @@ inline void toggle_pins() { wait = parser.intval('W', 500); for (uint8_t i = start; i <= end; i++) { - pin_t pin = GET_PIN_MAP_PIN(i); + pin_t pin = GET_PIN_MAP_PIN_M43(i); if (!VALID_PIN(pin)) continue; if (M43_NEVER_TOUCH(i) || (!ignore_protection && pin_is_protected(pin))) { report_pin_state_extended(pin, ignore_protection, true, "Untouched "); @@ -306,7 +310,7 @@ void GcodeSuite::M43() { #endif uint8_t pin_state[last_pin - first_pin + 1]; for (uint8_t i = first_pin; i <= last_pin; i++) { - pin_t pin = GET_PIN_MAP_PIN(i); + pin_t pin = GET_PIN_MAP_PIN_M43(i); if (!VALID_PIN(pin)) continue; if (M43_NEVER_TOUCH(i) || (!ignore_protection && pin_is_protected(pin))) continue; pinMode(pin, INPUT_PULLUP); @@ -329,7 +333,7 @@ void GcodeSuite::M43() { for (;;) { for (uint8_t i = first_pin; i <= last_pin; i++) { - pin_t pin = GET_PIN_MAP_PIN(i); + pin_t pin = GET_PIN_MAP_PIN_M43(i); if (!VALID_PIN(pin)) continue; if (M43_NEVER_TOUCH(i) || (!ignore_protection && pin_is_protected(pin))) continue; const byte val = @@ -355,7 +359,7 @@ void GcodeSuite::M43() { else { // Report current state of selected pin(s) for (uint8_t i = first_pin; i <= last_pin; i++) { - pin_t pin = GET_PIN_MAP_PIN(i); + pin_t pin = GET_PIN_MAP_PIN_M43(i); if (VALID_PIN(pin)) report_pin_state_extended(pin, ignore_protection, true); } } diff --git a/Marlin/src/pins/pinsDebug.h b/Marlin/src/pins/pinsDebug.h index 37a2e86812..e1f6b15734 100644 --- a/Marlin/src/pins/pinsDebug.h +++ b/Marlin/src/pins/pinsDebug.h @@ -121,7 +121,7 @@ inline void report_pin_state_extended(pin_t pin, bool ignore, bool extended = fa SERIAL_ECHO(buffer); PRINT_PIN(pin); PRINT_PORT(pin); - if (IS_ANALOG(pin)) { + if (int8_t(DIGITAL_PIN_TO_ANALOG_PIN(pin)) >= 0) { sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); // analog pin number SERIAL_ECHO(buffer); } @@ -183,7 +183,7 @@ inline void report_pin_state_extended(pin_t pin, bool ignore, bool extended = fa SERIAL_ECHO(buffer); PRINT_PIN(pin); PRINT_PORT(pin); - if (IS_ANALOG(pin)) { + if (int8_t(DIGITAL_PIN_TO_ANALOG_PIN(pin)) >= 0) { sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); // analog pin number SERIAL_ECHO(buffer); } @@ -206,7 +206,10 @@ inline void report_pin_state_extended(pin_t pin, bool ignore, bool extended = fa else #endif { - if (GET_PINMODE(pin)) { + if (pwm_status(pin)) { + // do nothing + } + else if (GET_PINMODE(pin)) { SERIAL_ECHO_SP(MAX_NAME_LENGTH - 16); print_input_or_output(true); SERIAL_ECHO(digitalRead_mod(pin)); @@ -224,7 +227,10 @@ inline void report_pin_state_extended(pin_t pin, bool ignore, bool extended = fa SERIAL_ECHO(digitalRead_mod(pin)); } //if (!pwm_status(pin)) SERIAL_CHAR(' '); // add padding if it's not a PWM pin - if (extended) pwm_details(pin); // report PWM capabilities only if doing an extended report + if (extended) { + SERIAL_ECHO_SP(MAX_NAME_LENGTH - 16); + pwm_details(pin); // report PWM capabilities only if doing an extended report + } } } SERIAL_EOL(); diff --git a/buildroot/share/atom/auto_build.py b/buildroot/share/atom/auto_build.py index cca690e2e2..0bec682d32 100644 --- a/buildroot/share/atom/auto_build.py +++ b/buildroot/share/atom/auto_build.py @@ -947,7 +947,7 @@ class output_window(Text): Text.__init__(self, self.frame, borderwidth=3, relief="sunken") self.config(tabs=(400,)) # configure Text widget tab stops self.config(background = 'black', foreground = 'white', font= ("consolas", 12), wrap = 'word', undo = 'True') -# self.config(background = 'black', foreground = 'white', font= ("consolas", 12), wrap = 'none', undo = 'True') + #self.config(background = 'black', foreground = 'white', font= ("consolas", 12), wrap = 'none', undo = 'True') self.config(height = 24, width = 100) self.config(insertbackground = 'pale green') # keyboard insertion point self.pack(side='left', fill='both', expand=True) @@ -970,24 +970,24 @@ class output_window(Text): self.config(yscrollcommand=scrb.set) scrb.pack(side='right', fill='y') -# self.scrb_Y = tk.Scrollbar(self.frame, orient='vertical', command=self.yview) -# self.scrb_Y.config(yscrollcommand=self.scrb_Y.set) -# self.scrb_Y.pack(side='right', fill='y') -# -# self.scrb_X = tk.Scrollbar(self.frame, orient='horizontal', command=self.xview) -# self.scrb_X.config(xscrollcommand=self.scrb_X.set) -# self.scrb_X.pack(side='bottom', fill='x') + #self.scrb_Y = tk.Scrollbar(self.frame, orient='vertical', command=self.yview) + #self.scrb_Y.config(yscrollcommand=self.scrb_Y.set) + #self.scrb_Y.pack(side='right', fill='y') -# scrb_X = tk.Scrollbar(self, orient=tk.HORIZONTAL, command=self.xview) # tk.HORIZONTAL now have a horizsontal scroll bar BUT... shrinks it to a postage stamp and hides far right behind the vertical scroll bar -# self.config(xscrollcommand=scrb_X.set) -# scrb_X.pack(side='bottom', fill='x') -# -# scrb= tk.Scrollbar(self, orient='vertical', command=self.yview) -# self.config(yscrollcommand=scrb.set) -# scrb.pack(side='right', fill='y') + #self.scrb_X = tk.Scrollbar(self.frame, orient='horizontal', command=self.xview) + #self.scrb_X.config(xscrollcommand=self.scrb_X.set) + #self.scrb_X.pack(side='bottom', fill='x') -# self.config(height = 240, width = 1000) # didn't get the size baCK TO NORMAL -# self.pack(side='left', fill='both', expand=True) # didn't get the size baCK TO NORMAL + #scrb_X = tk.Scrollbar(self, orient=tk.HORIZONTAL, command=self.xview) # tk.HORIZONTAL now have a horizsontal scroll bar BUT... shrinks it to a postage stamp and hides far right behind the vertical scroll bar + #self.config(xscrollcommand=scrb_X.set) + #scrb_X.pack(side='bottom', fill='x') + + #scrb= tk.Scrollbar(self, orient='vertical', command=self.yview) + #self.config(yscrollcommand=scrb.set) + #scrb.pack(side='right', fill='y') + + #self.config(height = 240, width = 1000) # didn't get the size baCK TO NORMAL + #self.pack(side='left', fill='both', expand=True) # didn't get the size baCK TO NORMAL # pop-up menu @@ -1003,7 +1003,7 @@ class output_window(Text): self.popup.add_separator() self.popup.add_command(label='Save As', command=self._file_save_as) self.popup.add_separator() - # self.popup.add_command(label='Repeat Build(CTL-shift-r)', command=self._rebuild) + #self.popup.add_command(label='Repeat Build(CTL-shift-r)', command=self._rebuild) self.popup.add_command(label='Repeat Build', command=self._rebuild) self.popup.add_separator() self.popup.add_command(label='Scroll Errors (CTL-shift-e)', command=self._scroll_errors) @@ -1199,12 +1199,13 @@ class output_window(Text): def _clear_all(self): - '''erases all text''' - - isok = askokcancel('Clear All', 'Erase all text?', frame=self, - default='ok') - if isok: - self.delete('1.0', 'end') + #'''erases all text''' + # + #isok = askokcancel('Clear All', 'Erase all text?', frame=self, + # default='ok') + #if isok: + # self.delete('1.0', 'end') + self.delete('1.0', 'end') # end - output_window