Implement NANODLP_Z_SYNC for 2.0.x

Marlin/Configuration_adv.h

@@ -1492,4 +1492,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/default/Configuration_adv.h

@@ -1492,4 +1492,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h

@@ -1493,4 +1493,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1488,4 +1488,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -1494,4 +1494,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1501,4 +1501,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -1485,4 +1485,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1495,4 +1495,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -1513,4 +1513,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -1480,4 +1480,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -1492,4 +1492,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -1499,4 +1499,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -1492,4 +1492,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -1493,4 +1493,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -1493,4 +1493,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -1493,4 +1493,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -1493,4 +1493,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -1498,4 +1498,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -1493,4 +1493,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -1492,4 +1492,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -1491,4 +1491,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -1492,4 +1492,14 @@
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
 
+/**
+ * NanoDLP Synch support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ *
+ */
+ //#define NANODLP_Z_SYNC
+ 
 #endif // CONFIGURATION_ADV_H

Marlin/src/core/language.h

@@ -145,6 +145,7 @@
 #define MSG_BUSY_PROCESSING                 "busy: processing"
 #define MSG_BUSY_PAUSED_FOR_USER            "busy: paused for user"
 #define MSG_BUSY_PAUSED_FOR_INPUT           "busy: paused for input"
+#define MSG_Z_MOVE_COMP                     "Z_move_comp"
 #define MSG_RESEND                          "Resend: "
 #define MSG_UNKNOWN_COMMAND                 "Unknown command: \""
 #define MSG_ACTIVE_EXTRUDER                 "Active Extruder: "

Marlin/src/gcode/motion/G0_G1.cpp

@@ -72,5 +72,13 @@ void GcodeSuite::G0_G1(
     #else
       prepare_move_to_destination();
     #endif
+
+    #if ENABLED(NANODLP_Z_SYNC)
+      // If G0/G1 command include Z-axis, wait for move and output sync text.
+      if (parser.seenval('Z')) {
+        stepper.synchronize();
+        SERIAL_ECHOLNPGM(MSG_Z_MOVE_COMP);
+      }
+    #endif
   }
 }