Sanity-check Z_STEPPER_AUTO_ALIGN coordinates (#16231)

Marlin/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

Marlin/src/gcode/calibrate/G34_M422.cpp

@@ -45,22 +45,49 @@
 #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
 #include "../../core/debug_out.h"
 
-// Sanity-check the count of Z_STEPPER_ALIGN_XY points
+//
-constexpr xy_pos_t sanity_arr_z_align[] = Z_STEPPER_ALIGN_XY;
+// Sanity check G34 / M422 settings
+//
+constexpr xy_pos_t test_z_stepper_align_xy[] = Z_STEPPER_ALIGN_XY;
+
 #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-  static_assert(COUNT(sanity_arr_z_align) >= Z_STEPPER_COUNT,
+
+  static_assert(COUNT(test_z_stepper_align_xy) >= Z_STEPPER_COUNT,
     "Z_STEPPER_ALIGN_XY requires at least three {X,Y} entries (Z, Z2, Z3, ...)."
   );
+
+  constexpr float test_z_stepper_align_stepper_xy[][XY] = Z_STEPPER_ALIGN_STEPPER_XY;
+  static_assert(
+    COUNT(test_z_stepper_align_stepper_xy) == Z_STEPPER_COUNT,
+    "Z_STEPPER_ALIGN_STEPPER_XY requires three {X,Y} entries (one per Z stepper)."
+  );
+
 #else
-  static_assert(COUNT(sanity_arr_z_align) == Z_STEPPER_COUNT,
+
+  static_assert(COUNT(test_z_stepper_align_xy) == Z_STEPPER_COUNT,
     #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
       "Z_STEPPER_ALIGN_XY requires three {X,Y} entries (Z, Z2, and Z3)."
     #else
       "Z_STEPPER_ALIGN_XY requires two {X,Y} entries (Z and Z2)."
     #endif
   );
+
 #endif
 
+constexpr xyz_pos_t dpo = NOZZLE_TO_PROBE_OFFSET;
+
+#define LTEST(N) (test_z_stepper_align_xy[N].x >= _MAX(X_MIN_BED + MIN_PROBE_EDGE_LEFT,  X_MIN_POS + dpo.x) - 0.00001f)
+#define RTEST(N) (test_z_stepper_align_xy[N].x <= _MIN(X_MAX_BED - MIN_PROBE_EDGE_RIGHT, X_MAX_POS + dpo.x) + 0.00001f)
+#define FTEST(N) (test_z_stepper_align_xy[N].y >= _MAX(Y_MIN_BED + MIN_PROBE_EDGE_FRONT, Y_MIN_POS + dpo.y) - 0.00001f)
+#define BTEST(N) (test_z_stepper_align_xy[N].y <= _MIN(Y_MAX_BED - MIN_PROBE_EDGE_BACK,  Y_MAX_POS + dpo.y) + 0.00001f)
+
+static_assert(LTEST(0) && RTEST(0), "The 1st Z_STEPPER_ALIGN_XY X is unreachable with the default probe X offset.");
+static_assert(FTEST(0) && BTEST(0), "The 1st Z_STEPPER_ALIGN_XY Y is unreachable with the default probe Y offset.");
+static_assert(LTEST(1) && RTEST(1), "The 2nd Z_STEPPER_ALIGN_XY X is unreachable with the default probe X offset.");
+static_assert(FTEST(1) && BTEST(1), "The 2nd Z_STEPPER_ALIGN_XY Y is unreachable with the default probe Y offset.");
+static_assert(LTEST(2) && RTEST(2), "The 3rd Z_STEPPER_ALIGN_XY X is unreachable with the default probe X offset.");
+static_assert(FTEST(2) && BTEST(2), "The 3rd Z_STEPPER_ALIGN_XY Y is unreachable with the default probe Y offset.");
+
 //
 // G34 / M422 shared data
 //

Marlin/src/inc/SanityCheck.h

@@ -2353,24 +2353,13 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 #endif
 
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
-
   #if !Z_MULTI_STEPPER_DRIVERS
     #error "Z_STEPPER_AUTO_ALIGN requires Z_DUAL_STEPPER_DRIVERS or Z_TRIPLE_STEPPER_DRIVERS."
   #elif !HAS_BED_PROBE
     #error "Z_STEPPER_AUTO_ALIGN requires a Z-bed probe."
-  #endif
+  #elif ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) && DISABLED(Z_TRIPLE_STEPPER_DRIVERS)
-
-  #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-    #if DISABLED(Z_TRIPLE_STEPPER_DRIVERS)
     #error "Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS requires Z_TRIPLE_STEPPER_DRIVERS."
   #endif
-    constexpr float sanity_arr_screw_xy[][2] = Z_STEPPER_ALIGN_STEPPER_XY;
-    static_assert(
-      COUNT(sanity_arr_screw_xy) == Z_STEPPER_COUNT,
-      "Z_STEPPER_ALIGN_STEPPER_XY requires three {X,Y} entries (one per Z stepper)."
-    );
-  #endif
-
 #endif
 
 #if ENABLED(PRINTCOUNTER) && DISABLED(EEPROM_SETTINGS)

config/default/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -657,7 +657,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Alfawise/U20/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Anet/A2/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Anet/A2plus/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Anet/A6/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Anet/A8/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Anet/A8plus/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Anet/E16/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/ArmEd/Configuration_adv.h

@@ -660,7 +660,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Cartesio/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/CR-10/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/CR-20/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/CR-8/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Creality/Ender-5/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Einstart-S/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/FYSETC/Cheetah/base/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/FYSETC/S6/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Felix/DUAL/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Felix/Single/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -660,7 +660,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -660,7 +660,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/A10/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/A10D/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/A10T/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/A20/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/A20T/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/A30/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/E180/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/PI3A PRO/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/HMS434/Configuration_adv.h

@@ -648,7 +648,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/JGAurora/A1/Configuration_adv.h

@@ -661,7 +661,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/JGAurora/A5/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/JGAurora/A5S/Configuration_adv.h

@@ -661,7 +661,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/MakerParts/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Malyan/M150/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Malyan/M200/Configuration_adv.h

@@ -658,7 +658,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Mks/Robin/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Mks/Sbase/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Modix/Big60/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Renkforce/RF100/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Renkforce/RF100XL/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Renkforce/RF100v2/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/RigidBot/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/SCARA/Morgan/Configuration_adv.h

@@ -653,7 +653,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Sanguinololu/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Tevo/Michelangelo/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Tevo/Tarantula Pro/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/TheBorg/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/TinyBoy2/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.

config/examples/VORONDesign/Configuration_adv.h

@@ -656,7 +656,7 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
 
   // Provide Z stepper positions for more rapid convergence in bed alignment.
   // Currently requires triple stepper drivers.