zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Emulated DOGM via HAL TFT, XPT IO (#19017)

Browse source
This commit is contained in:
Victor Oliveira 2020-08-21 20:54:21 -03:00 committed by Scott Lahteine
parent 7dea6c53ed
commit dded56c4bb
28 changed files with 595 additions and 1377 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

331
Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_fsmc.cpp
View file

@ -1,331 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* u8g_com_stm32duino_fsmc.cpp
*
* Communication interface for FSMC
*/
#include "../../../inc/MarlinConfig.h"
#if defined(ARDUINO_ARCH_STM32F1) && PIN_EXISTS(FSMC_CS) // FSMC on 100/144 pins SoCs
#if HAS_GRAPHICAL_LCD
#include <U8glib.h>
#include <libmaple/fsmc.h>
#include <libmaple/gpio.h>
#include <libmaple/dma.h>
#include <boards.h>
#ifndef LCD_READ_ID
#define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341)
#endif
/* Timing configuration */
#define FSMC_ADDRESS_SETUP_TIME 15 // AddressSetupTime
#define FSMC_DATA_SETUP_TIME 15 // DataSetupTime
void LCD_IO_Init(uint8_t cs, uint8_t rs);
void LCD_IO_WriteData(uint16_t RegValue);
void LCD_IO_WriteReg(uint16_t Reg);
uint16_t LCD_IO_ReadData(uint16_t RegValue);
uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize);
#ifdef LCD_USE_DMA_FSMC
void LCD_IO_WriteMultiple(uint16_t data, uint32_t count);
void LCD_IO_WriteSequence(uint16_t *data, uint16_t length);
#endif
static uint8_t msgInitCount = 2; // Ignore all messages until 2nd U8G_COM_MSG_INIT
uint8_t u8g_com_stm32duino_fsmc_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
if (msgInitCount) {
if (msg == U8G_COM_MSG_INIT) msgInitCount--;
if (msgInitCount) return -1;
}
static uint8_t isCommand;
switch (msg) {
case U8G_COM_MSG_STOP: break;
case U8G_COM_MSG_INIT:
u8g_SetPIOutput(u8g, U8G_PI_RESET);
#ifdef LCD_USE_DMA_FSMC
dma_init(FSMC_DMA_DEV);
dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
dma_set_priority(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, DMA_PRIORITY_MEDIUM);
#endif
LCD_IO_Init(u8g->pin_list[U8G_PI_CS], u8g->pin_list[U8G_PI_A0]);
u8g_Delay(50);
if (arg_ptr) {
*((uint32_t *)arg_ptr) = LCD_IO_ReadData(0x0000);
if (*((uint32_t *)arg_ptr) == 0)
*((uint32_t *)arg_ptr) = (LCD_READ_ID << 24) | LCD_IO_ReadData(LCD_READ_ID, 3);
}
isCommand = 0;
break;
case U8G_COM_MSG_ADDRESS: // define cmd (arg_val = 0) or data mode (arg_val = 1)
isCommand = arg_val == 0 ? 1 : 0;
break;
case U8G_COM_MSG_RESET:
u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_WRITE_BYTE:
if (isCommand)
LCD_IO_WriteReg(arg_val);
else
LCD_IO_WriteData((uint16_t)arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ:
for (uint8_t i = 0; i < arg_val; i += 2)
LCD_IO_WriteData(*(uint16_t *)(((uint32_t)arg_ptr) + i));
break;
}
return 1;
}
/**
* FSMC LCD IO
*/
#define __ASM __asm
#define __STATIC_INLINE static inline
__attribute__((always_inline)) __STATIC_INLINE void __DSB() {
__ASM volatile ("dsb 0xF":::"memory");
}
#define FSMC_CS_NE1 PD7
#if ENABLED(STM32_XL_DENSITY)
#define FSMC_CS_NE2 PG9
#define FSMC_CS_NE3 PG10
#define FSMC_CS_NE4 PG12
#define FSMC_RS_A0 PF0
#define FSMC_RS_A1 PF1
#define FSMC_RS_A2 PF2
#define FSMC_RS_A3 PF3
#define FSMC_RS_A4 PF4
#define FSMC_RS_A5 PF5
#define FSMC_RS_A6 PF12
#define FSMC_RS_A7 PF13
#define FSMC_RS_A8 PF14
#define FSMC_RS_A9 PF15
#define FSMC_RS_A10 PG0
#define FSMC_RS_A11 PG1
#define FSMC_RS_A12 PG2
#define FSMC_RS_A13 PG3
#define FSMC_RS_A14 PG4
#define FSMC_RS_A15 PG5
#endif
#define FSMC_RS_A16 PD11
#define FSMC_RS_A17 PD12
#define FSMC_RS_A18 PD13
#define FSMC_RS_A19 PE3
#define FSMC_RS_A20 PE4
#define FSMC_RS_A21 PE5
#define FSMC_RS_A22 PE6
#define FSMC_RS_A23 PE2
#if ENABLED(STM32_XL_DENSITY)
#define FSMC_RS_A24 PG13
#define FSMC_RS_A25 PG14
#endif
static uint8_t fsmcInit = 0;
typedef struct {
__IO uint16_t REG;
__IO uint16_t RAM;
} LCD_CONTROLLER_TypeDef;
LCD_CONTROLLER_TypeDef *LCD;
void LCD_IO_Init(uint8_t cs, uint8_t rs) {
uint32_t controllerAddress;
struct fsmc_nor_psram_reg_map* fsmcPsramRegion;
if (fsmcInit) return;
fsmcInit = 1;
switch (cs) {
case FSMC_CS_NE1: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION1; fsmcPsramRegion = FSMC_NOR_PSRAM1_BASE; break;
#if ENABLED(STM32_XL_DENSITY)
case FSMC_CS_NE2: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION2; fsmcPsramRegion = FSMC_NOR_PSRAM2_BASE; break;
case FSMC_CS_NE3: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION3; fsmcPsramRegion = FSMC_NOR_PSRAM3_BASE; break;
case FSMC_CS_NE4: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION4; fsmcPsramRegion = FSMC_NOR_PSRAM4_BASE; break;
#endif
default: return;
}
#define _ORADDR(N) controllerAddress |= (_BV32(N) - 2)
switch (rs) {
#if ENABLED(STM32_XL_DENSITY)
case FSMC_RS_A0: _ORADDR( 1); break;
case FSMC_RS_A1: _ORADDR( 2); break;
case FSMC_RS_A2: _ORADDR( 3); break;
case FSMC_RS_A3: _ORADDR( 4); break;
case FSMC_RS_A4: _ORADDR( 5); break;
case FSMC_RS_A5: _ORADDR( 6); break;
case FSMC_RS_A6: _ORADDR( 7); break;
case FSMC_RS_A7: _ORADDR( 8); break;
case FSMC_RS_A8: _ORADDR( 9); break;
case FSMC_RS_A9: _ORADDR(10); break;
case FSMC_RS_A10: _ORADDR(11); break;
case FSMC_RS_A11: _ORADDR(12); break;
case FSMC_RS_A12: _ORADDR(13); break;
case FSMC_RS_A13: _ORADDR(14); break;
case FSMC_RS_A14: _ORADDR(15); break;
case FSMC_RS_A15: _ORADDR(16); break;
#endif
case FSMC_RS_A16: _ORADDR(17); break;
case FSMC_RS_A17: _ORADDR(18); break;
case FSMC_RS_A18: _ORADDR(19); break;
case FSMC_RS_A19: _ORADDR(20); break;
case FSMC_RS_A20: _ORADDR(21); break;
case FSMC_RS_A21: _ORADDR(22); break;
case FSMC_RS_A22: _ORADDR(23); break;
case FSMC_RS_A23: _ORADDR(24); break;
#if ENABLED(STM32_XL_DENSITY)
case FSMC_RS_A24: _ORADDR(25); break;
case FSMC_RS_A25: _ORADDR(26); break;
#endif
default: return;
}
rcc_clk_enable(RCC_FSMC);
gpio_set_mode(GPIOD, 14, GPIO_AF_OUTPUT_PP); // FSMC_D00
gpio_set_mode(GPIOD, 15, GPIO_AF_OUTPUT_PP); // FSMC_D01
gpio_set_mode(GPIOD, 0, GPIO_AF_OUTPUT_PP); // FSMC_D02
gpio_set_mode(GPIOD, 1, GPIO_AF_OUTPUT_PP); // FSMC_D03
gpio_set_mode(GPIOE, 7, GPIO_AF_OUTPUT_PP); // FSMC_D04
gpio_set_mode(GPIOE, 8, GPIO_AF_OUTPUT_PP); // FSMC_D05
gpio_set_mode(GPIOE, 9, GPIO_AF_OUTPUT_PP); // FSMC_D06
gpio_set_mode(GPIOE, 10, GPIO_AF_OUTPUT_PP); // FSMC_D07
gpio_set_mode(GPIOE, 11, GPIO_AF_OUTPUT_PP); // FSMC_D08
gpio_set_mode(GPIOE, 12, GPIO_AF_OUTPUT_PP); // FSMC_D09
gpio_set_mode(GPIOE, 13, GPIO_AF_OUTPUT_PP); // FSMC_D10
gpio_set_mode(GPIOE, 14, GPIO_AF_OUTPUT_PP); // FSMC_D11
gpio_set_mode(GPIOE, 15, GPIO_AF_OUTPUT_PP); // FSMC_D12
gpio_set_mode(GPIOD, 8, GPIO_AF_OUTPUT_PP); // FSMC_D13
gpio_set_mode(GPIOD, 9, GPIO_AF_OUTPUT_PP); // FSMC_D14
gpio_set_mode(GPIOD, 10, GPIO_AF_OUTPUT_PP); // FSMC_D15
gpio_set_mode(GPIOD, 4, GPIO_AF_OUTPUT_PP); // FSMC_NOE
gpio_set_mode(GPIOD, 5, GPIO_AF_OUTPUT_PP); // FSMC_NWE
gpio_set_mode(PIN_MAP[cs].gpio_device, PIN_MAP[cs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_CS_NEx
gpio_set_mode(PIN_MAP[rs].gpio_device, PIN_MAP[rs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_RS_Ax
fsmcPsramRegion->BCR = FSMC_BCR_WREN | FSMC_BCR_MTYP_SRAM | FSMC_BCR_MWID_16BITS | FSMC_BCR_MBKEN;
fsmcPsramRegion->BTR = (FSMC_DATA_SETUP_TIME << 8) | FSMC_ADDRESS_SETUP_TIME;
afio_remap(AFIO_REMAP_FSMC_NADV);
LCD = (LCD_CONTROLLER_TypeDef*)controllerAddress;
}
void LCD_IO_WriteData(uint16_t RegValue) {
LCD->RAM = RegValue;
__DSB();
}
void LCD_IO_WriteReg(uint16_t Reg) {
LCD->REG = Reg;
__DSB();
}
uint16_t LCD_IO_ReadData(uint16_t RegValue) {
LCD->REG = RegValue;
__DSB();
return LCD->RAM;
}
uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize) {
volatile uint32_t data;
LCD->REG = RegValue;
__DSB();
data = LCD->RAM; // dummy read
data = LCD->RAM & 0x00FF;
while (--ReadSize) {
data <<= 8;
data |= (LCD->RAM & 0x00FF);
}
return uint32_t(data);
}
#ifdef LCD_USE_DMA_FSMC
void LCD_IO_WriteMultiple(uint16_t color, uint32_t count) {
while (count > 0) {
dma_setup_transfer(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, &color, DMA_SIZE_16BITS, &LCD->RAM, DMA_SIZE_16BITS, DMA_MEM_2_MEM);
dma_set_num_transfers(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, count > 65535 ? 65535 : count);
dma_clear_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
dma_enable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
while ((dma_get_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL) & 0x0A) == 0) {};
dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
count = count > 65535 ? count - 65535 : 0;
}
}
void LCD_IO_WriteSequence(uint16_t *data, uint16_t length) {
dma_setup_transfer(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, data, DMA_SIZE_16BITS, &LCD->RAM, DMA_SIZE_16BITS, DMA_MEM_2_MEM | DMA_PINC_MODE);
dma_set_num_transfers(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, length);
dma_clear_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
dma_enable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
while ((dma_get_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL) & 0x0A) == 0) {};
dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
}
void LCD_IO_WriteSequence_Async(uint16_t *data, uint16_t length) {
dma_setup_transfer(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, data, DMA_SIZE_16BITS, &LCD->RAM, DMA_SIZE_16BITS, DMA_MEM_2_MEM | DMA_PINC_MODE);
dma_set_num_transfers(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, length);
dma_clear_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
dma_enable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
}
void LCD_IO_WaitSequence_Async() {
while ((dma_get_isr_bits(FSMC_DMA_DEV, FSMC_DMA_CHANNEL) & 0x0A) == 0) {};
dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL);
}
#endif // LCD_USE_DMA_FSMC
#endif // HAS_GRAPHICAL_LCD
#endif // ARDUINO_ARCH_STM32F1 && FSMC_CS_PIN

236
Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_hwspi.cpp
View file

@ -1,236 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __STM32F1__
#include "../../../inc/MarlinConfig.h"
#if ENABLED(SPI_GRAPHICAL_TFT) && DISABLED(FORCE_SOFT_SPI)
#include "../HAL.h"
#include <U8glib.h>
#include <SPI.h>
#define SPI_TFT_CS_H OUT_WRITE(SPI_TFT_CS_PIN, HIGH)
#define SPI_TFT_CS_L OUT_WRITE(SPI_TFT_CS_PIN, LOW)
#define SPI_TFT_DC_H OUT_WRITE(SPI_TFT_DC_PIN, HIGH)
#define SPI_TFT_DC_L OUT_WRITE(SPI_TFT_DC_PIN, LOW)
#define SPI_TFT_RST_H OUT_WRITE(SPI_TFT_RST_PIN, HIGH)
#define SPI_TFT_RST_L OUT_WRITE(SPI_TFT_RST_PIN, LOW)
#define SPI_TFT_BLK_H OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH)
#define SPI_TFT_BLK_L OUT_WRITE(LCD_BACKLIGHT_PIN, LOW)
void LCD_IO_Init(uint8_t cs, uint8_t rs);
void LCD_IO_WriteData(uint16_t RegValue);
void LCD_IO_WriteReg(uint16_t Reg);
uint16_t LCD_IO_ReadData(uint16_t RegValue);
uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize);
#ifdef LCD_USE_DMA_SPI
void LCD_IO_WriteMultiple(uint16_t data, uint32_t count);
void LCD_IO_WriteSequence(uint16_t *data, uint16_t length);
#endif
void LCD_WR_REG(uint8_t cmd) {
SPI_TFT_CS_L;
SPI_TFT_DC_L;
SPI.send(cmd);
SPI_TFT_CS_H;
}
void LCD_WR_DATA(uint8_t data) {
SPI_TFT_CS_L;
SPI_TFT_DC_H;
SPI.send(data);
SPI_TFT_CS_H;
}
void spi1Init(uint8_t spiRate) {
SPI_TFT_CS_H;
/**
* STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
* STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
* so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
*/
uint8_t clock;
switch (spiRate) {
case SPI_FULL_SPEED: clock = SPI_CLOCK_DIV4; break;
case SPI_HALF_SPEED: clock = SPI_CLOCK_DIV4; break;
case SPI_QUARTER_SPEED: clock = SPI_CLOCK_DIV8; break;
case SPI_EIGHTH_SPEED: clock = SPI_CLOCK_DIV16; break;
case SPI_SPEED_5: clock = SPI_CLOCK_DIV32; break;
case SPI_SPEED_6: clock = SPI_CLOCK_DIV64; break;
default: clock = SPI_CLOCK_DIV2; // Default from the SPI library
}
SPI.setModule(1);
SPI.begin();
SPI.setClockDivider(clock);
SPI.setBitOrder(MSBFIRST);
SPI.setDataMode(SPI_MODE0);
}
void LCD_IO_Init(uint8_t cs, uint8_t rs) {
spi1Init(SPI_FULL_SPEED);
}
void LCD_IO_WriteData(uint16_t RegValue) {
LCD_WR_DATA(RegValue);
}
void LCD_IO_WriteReg(uint16_t Reg) {
LCD_WR_REG(Reg);
}
uint16_t LCD_IO_ReadData(uint16_t RegValue) {
uint16_t d = 0;
SPI_TFT_CS_L;
SPI_TFT_DC_L;
SPI.send(RegValue);
SPI_TFT_DC_H;
SPI.read((uint8_t*)&d, 1); //dummy read
SPI.read((uint8_t*)&d, 1);
SPI_TFT_CS_H;
return d >> 7;
}
uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize) {
uint32_t data = 0;
uint8_t d = 0;
SPI_TFT_CS_L;
SPI_TFT_DC_L;
SPI.send(RegValue);
SPI_TFT_DC_H;
SPI.read((uint8_t*)&d, 1); //dummy read
SPI.read((uint8_t*)&d, 1);
data = d;
while (--ReadSize) {
data <<= 8;
SPI.read((uint8_t*)&d, 1);
data |= (d & 0xFF);
}
SPI_TFT_CS_H;
return uint32_t(data >> 7);
}
#ifdef LCD_USE_DMA_SPI
void LCD_IO_WriteMultiple(uint16_t data, uint32_t count) {
if (SPI.getDataSize() == DATA_SIZE_8BIT) {
count *= 2;
}
while (count > 0) {
SPI_TFT_CS_L;
SPI_TFT_DC_H;
SPI.dmaSend(&data, 1, true);
SPI_TFT_CS_H;
count--;
}
}
void LCD_IO_WriteSequence(uint16_t *data, uint16_t length) {
if (SPI.getDataSize() == DATA_SIZE_8BIT) {
length *= 2;
}
SPI_TFT_CS_L;
SPI_TFT_DC_H;
SPI.dmaSend(data, length, true);
SPI_TFT_CS_H;
}
void LCD_IO_WriteSequence_Async(uint16_t *data, uint16_t length) {
if (SPI.getDataSize() == DATA_SIZE_8BIT) {
length *= 2;
}
SPI_TFT_CS_L;
SPI_TFT_DC_H;
SPI.dmaSendAsync(data, length, true);
SPI_TFT_CS_H;
}
void LCD_IO_WaitSequence_Async() {
SPI_TFT_CS_L;
SPI_TFT_DC_H;
SPI.dmaSendAsync(NULL, 0, true);
SPI_TFT_CS_H;
}
#endif
static uint8_t msgInitCount = 2; // Ignore all messages until 2nd U8G_COM_MSG_INIT
#ifndef LCD_READ_ID
#define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341)
#endif
uint8_t u8g_com_stm32duino_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
if (msgInitCount) {
if (msg == U8G_COM_MSG_INIT) msgInitCount--;
if (msgInitCount) return -1;
}
static uint8_t isCommand;
LCD_IO_Init(-1, -1);
switch (msg) {
case U8G_COM_MSG_STOP: break;
case U8G_COM_MSG_INIT:
u8g_SetPIOutput(u8g, U8G_PI_RESET);
u8g_Delay(50);
if (arg_ptr) {
spi1Init(SPI_EIGHTH_SPEED);
*((uint32_t *)arg_ptr) = (LCD_READ_ID << 24) | LCD_IO_ReadData(LCD_READ_ID, 3);
spi1Init(SPI_FULL_SPEED);
}
isCommand = 0;
break;
case U8G_COM_MSG_ADDRESS: // define cmd (arg_val = 0) or data mode (arg_val = 1)
isCommand = arg_val == 0 ? 1 : 0;
break;
case U8G_COM_MSG_RESET:
u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_WRITE_BYTE:
if (isCommand)
LCD_IO_WriteReg(arg_val);
else
LCD_IO_WriteData((uint16_t)arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ:
for (uint8_t i = 0; i < arg_val; i += 2)
LCD_IO_WriteData(*(uint16_t *)(((uint32_t)arg_ptr) + i));
break;
}
return 1;
}
#endif // SPI_GRAPHICAL_TFT && !FORCE_SOFT_SPI
#endif // STM32F1

4
Marlin/src/HAL/STM32F1/inc/Conditionals_LCD.h
View file

@ -26,8 +26,8 @@
#undef SD_CHECK_AND_RETRY #undef SD_CHECK_AND_RETRY
#endif #endif
// This platform has 'touch/xpt2046', not 'tft/xpt2046' // This emulated DOGM has 'touch/xpt2046', not 'tft/xpt2046'
#if ENABLED(TOUCH_SCREEN) && !HAS_FSMC_TFT && !HAS_SPI_TFT #if ENABLED(TOUCH_SCREEN) && !HAS_GRAPHICAL_TFT
#undef TOUCH_SCREEN #undef TOUCH_SCREEN
#undef TOUCH_SCREEN_CALIBRATION #undef TOUCH_SCREEN_CALIBRATION
#define HAS_TOUCH_XPT2046 1 #define HAS_TOUCH_XPT2046 1

2
Marlin/src/HAL/STM32F1/tft/tft_fsmc.cpp
View file

@ -22,7 +22,7 @@
#include "../../../inc/MarlinConfig.h" #include "../../../inc/MarlinConfig.h"
#if HAS_FSMC_TFT || ENABLED(TFT_LVGL_UI_FSMC) #if HAS_FSMC_TFT
#include "tft_fsmc.h" #include "tft_fsmc.h"
#include <libmaple/fsmc.h> #include <libmaple/fsmc.h>

30
Marlin/src/HAL/STM32F1/tft/tft_spi.cpp
View file

@ -22,7 +22,7 @@
#include "../../../inc/MarlinConfig.h" #include "../../../inc/MarlinConfig.h"
#if HAS_SPI_TFT || ENABLED(TFT_LVGL_UI_SPI) #if HAS_SPI_TFT
#include "tft_spi.h" #include "tft_spi.h"
@ -30,32 +30,32 @@
SPIClass TFT_SPI::SPIx(1); SPIClass TFT_SPI::SPIx(1);
#define SPI_TFT_CS_H OUT_WRITE(TFT_CS_PIN, HIGH) #define TFT_CS_H OUT_WRITE(TFT_CS_PIN, HIGH)
#define SPI_TFT_CS_L OUT_WRITE(TFT_CS_PIN, LOW) #define TFT_CS_L OUT_WRITE(TFT_CS_PIN, LOW)
#define SPI_TFT_DC_H OUT_WRITE(TFT_DC_PIN, HIGH) #define TFT_DC_H OUT_WRITE(TFT_DC_PIN, HIGH)
#define SPI_TFT_DC_L OUT_WRITE(TFT_DC_PIN, LOW) #define TFT_DC_L OUT_WRITE(TFT_DC_PIN, LOW)
#define SPI_TFT_RST_H OUT_WRITE(TFT_RST_PIN, HIGH) #define TFT_RST_H OUT_WRITE(TFT_RST_PIN, HIGH)
#define SPI_TFT_RST_L OUT_WRITE(TFT_RST_PIN, LOW) #define TFT_RST_L OUT_WRITE(TFT_RST_PIN, LOW)
#define SPI_TFT_BLK_H OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH) #define TFT_BLK_H OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH)
#define SPI_TFT_BLK_L OUT_WRITE(TFT_BACKLIGHT_PIN, LOW) #define TFT_BLK_L OUT_WRITE(TFT_BACKLIGHT_PIN, LOW)
void TFT_SPI::Init() { void TFT_SPI::Init() {
#if PIN_EXISTS(TFT_RESET) #if PIN_EXISTS(TFT_RESET)
// OUT_WRITE(TFT_RESET_PIN, HIGH); // OUT_WRITE(TFT_RESET_PIN, HIGH);
SPI_TFT_RST_H; TFT_RST_H;
delay(100); delay(100);
#endif #endif
#if PIN_EXISTS(TFT_BACKLIGHT) #if PIN_EXISTS(TFT_BACKLIGHT)
// OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH); // OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH);
SPI_TFT_BLK_H; TFT_BLK_H;
#endif #endif
SPI_TFT_DC_H; TFT_DC_H;
SPI_TFT_CS_H; TFT_CS_H;
/** /**
* STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz * STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
@ -87,7 +87,7 @@ void TFT_SPI::Init() {
void TFT_SPI::DataTransferBegin(uint16_t DataSize) { void TFT_SPI::DataTransferBegin(uint16_t DataSize) {
SPIx.setDataSize(DataSize); SPIx.setDataSize(DataSize);
SPIx.begin(); SPIx.begin();
SPI_TFT_CS_L; TFT_CS_L;
} }
uint32_t TFT_SPI::GetID() { uint32_t TFT_SPI::GetID() {
@ -135,7 +135,7 @@ void TFT_SPI::Transmit(uint16_t Data) {
void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) { void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DataTransferBegin(); DataTransferBegin();
SPI_TFT_DC_H; TFT_DC_H;
if (MemoryIncrease == DMA_MINC_ENABLE) { if (MemoryIncrease == DMA_MINC_ENABLE) {
SPIx.dmaSend(Data, Count, true); SPIx.dmaSend(Data, Count, true);
} }

2
Marlin/src/HAL/STM32F1/tft/xpt2046.cpp
View file

@ -19,7 +19,7 @@
#include "../../../inc/MarlinConfig.h" #include "../../../inc/MarlinConfig.h"
#if HAS_TFT_XPT2046 #if HAS_TFT_XPT2046 || HAS_TOUCH_XPT2046
#include "xpt2046.h" #include "xpt2046.h"
#include <SPI.h> #include <SPI.h>

20
Marlin/src/HAL/STM32F1/tft/xpt2046.h
View file

@ -24,16 +24,18 @@
#include <SPI.h> #include <SPI.h>
#endif #endif
#if !PIN_EXISTS(TOUCH_MISO) #ifndef TOUCH_MISO_PIN
#error "TOUCH_MISO_PIN is not defined." #define TOUCH_MISO_PIN MISO_PIN
#elif !PIN_EXISTS(TOUCH_MOSI) #endif
#error "TOUCH_MOSI_PIN is not defined." #ifndef TOUCH_MOSI_PIN
#elif !PIN_EXISTS(TOUCH_SCK) #define TOUCH_MOSI_PIN MOSI_PIN
#error "TOUCH_SCK_PIN is not defined." #endif
#elif !PIN_EXISTS(TOUCH_CS) #ifndef TOUCH_SCK_PIN
#error "TOUCH_CS_PIN is not defined." #define TOUCH_SCK_PIN SCK_PIN
#endif
#ifndef TOUCH_CS_PIN
#define TOUCH_CS_PIN CS_PIN
#endif #endif
#ifndef TOUCH_INT_PIN #ifndef TOUCH_INT_PIN
#define TOUCH_INT_PIN -1 #define TOUCH_INT_PIN -1
#endif #endif

2
Marlin/src/MarlinCore.cpp
View file

@ -57,7 +57,7 @@
#include "lcd/ultralcd.h" #include "lcd/ultralcd.h"
#if HAS_TOUCH_XPT2046 #if HAS_TOUCH_XPT2046
#include "lcd/touch/xpt2046.h" #include "lcd/touch/touch_buttons.h"
#endif #endif
#if HAS_TFT_LVGL_UI #if HAS_TFT_LVGL_UI

9
Marlin/src/inc/Conditionals_LCD.h
View file

@ -286,14 +286,15 @@
#define DELAYED_BACKLIGHT_INIT #define DELAYED_BACKLIGHT_INIT
#endif #endif
// FSMC/SPI TFT Panels (HAL STM32) // FSMC/SPI TFT Panels using standard HAL/tft/tft_(fsmc|spi).h
#if EITHER(TFT_320x240, TFT_480x320) #if ANY(TFT_320x240, TFT_480x320, TFT_LVGL_UI_FSMC, FSMC_GRAPHICAL_TFT)
#define HAS_FSMC_TFT 1 #define HAS_FSMC_TFT 1
#elif EITHER(TFT_320x240_SPI, TFT_480x320_SPI) #elif ANY(TFT_320x240_SPI, TFT_480x320_SPI, TFT_LVGL_UI_SPI, SPI_GRAPHICAL_TFT)
#define HAS_SPI_TFT 1 #define HAS_SPI_TFT 1
#endif #endif
#if HAS_FSMC_TFT || HAS_SPI_TFT // Color UI
#if ANY(TFT_320x240, TFT_480x320, TFT_320x240_SPI, TFT_480x320_SPI)
#define HAS_GRAPHICAL_TFT 1 #define HAS_GRAPHICAL_TFT 1
#define IS_ULTIPANEL #define IS_ULTIPANEL
#endif #endif

6
Marlin/src/inc/SanityCheck.h
View file

@ -515,6 +515,12 @@
#error "DIGIPOT_I2C is now DIGIPOT_MCP4451 (or DIGIPOT_MCP4018). Please update Configuration_adv.h." #error "DIGIPOT_I2C is now DIGIPOT_MCP4451 (or DIGIPOT_MCP4018). Please update Configuration_adv.h."
#elif defined(TOUCH_BUTTONS) #elif defined(TOUCH_BUTTONS)
#error "TOUCH_BUTTONS is now TOUCH_SCREEN. Please update your Configuration.h." #error "TOUCH_BUTTONS is now TOUCH_SCREEN. Please update your Configuration.h."
#elif defined(LCD_FULL_PIXEL_HEIGHT)
#error "LCD_FULL_PIXEL_HEIGHT is deprecated and should be removed. Please update your Configuration.h."
#elif defined(LCD_FULL_PIXEL_WIDTH)
#error "LCD_FULL_PIXEL_WIDTH is deprecated and should be removed. Please update your Configuration.h."
#elif defined(FSMC_UPSCALE)
#error "FSMC_UPSCALE is now GRAPHICAL_TFT_UPSCALE. Please update your Configuration.h."
#elif defined(ANYCUBIC_TFT_MODEL) #elif defined(ANYCUBIC_TFT_MODEL)
#error "ANYCUBIC_TFT_MODEL is now ANYCUBIC_LCD_I3MEGA. Please update your Configuration.h." #error "ANYCUBIC_TFT_MODEL is now ANYCUBIC_LCD_I3MEGA. Please update your Configuration.h."
#elif defined(EVENT_GCODE_SD_STOP) #elif defined(EVENT_GCODE_SD_STOP)

15
Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
View file

@ -82,14 +82,9 @@
#define U8G_COM_SSD_I2C_HAL u8g_com_arduino_ssd_i2c_fn #define U8G_COM_SSD_I2C_HAL u8g_com_arduino_ssd_i2c_fn
#if PIN_EXISTS(FSMC_CS) #if EITHER(FSMC_GRAPHICAL_TFT, SPI_GRAPHICAL_TFT)
uint8_t u8g_com_stm32duino_fsmc_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); uint8_t u8g_com_stm32duino_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_FSMC_FN u8g_com_stm32duino_fsmc_fn #define U8G_COM_HAL_TFT_FN u8g_com_stm32duino_tft_fn
#endif
#if ENABLED(SPI_GRAPHICAL_TFT)
uint8_t u8g_com_stm32duino_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_FSMC_FN u8g_com_stm32duino_spi_fn
#endif #endif
#elif defined(TARGET_LPC1768) #elif defined(TARGET_LPC1768)
@ -122,6 +117,6 @@
#ifndef U8G_COM_SSD_I2C_HAL #ifndef U8G_COM_SSD_I2C_HAL
#define U8G_COM_SSD_I2C_HAL u8g_com_null_fn #define U8G_COM_SSD_I2C_HAL u8g_com_null_fn
#endif #endif
#ifndef U8G_COM_HAL_FSMC_FN #ifndef U8G_COM_HAL_TFT_FN
#define U8G_COM_HAL_FSMC_FN u8g_com_null_fn #define U8G_COM_HAL_TFT_FN u8g_com_null_fn
#endif #endif

165
Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp
View file

@ -67,28 +67,24 @@
#define HAS_LCD_IO 1 #define HAS_LCD_IO 1
#endif #endif
#if HAS_LCD_IO #if ENABLED(SPI_GRAPHICAL_TFT)
extern void LCD_IO_Init(uint8_t cs, uint8_t rs); #include HAL_PATH(../../HAL, tft/tft_spi.h)
extern uint16_t LCD_IO_ReadData(uint16_t Reg); #elif ENABLED(FSMC_GRAPHICAL_TFT)
extern uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize); #include HAL_PATH(../../HAL, tft/tft_fsmc.h)
extern void LCD_IO_WriteReg(uint16_t Reg);
extern void LCD_IO_WriteData(uint16_t RegValue);
extern void LCD_IO_WriteSequence(uint16_t *data, uint16_t length);
extern void LCD_IO_WriteSequence_Async(uint16_t *data, uint16_t length);
extern void LCD_IO_WaitSequence_Async();
extern void LCD_IO_WriteMultiple(uint16_t color, uint32_t count);
#endif #endif
TFT_IO tftio;
#define WIDTH LCD_PIXEL_WIDTH #define WIDTH LCD_PIXEL_WIDTH
#define HEIGHT LCD_PIXEL_HEIGHT #define HEIGHT LCD_PIXEL_HEIGHT
#define PAGE_HEIGHT 8 #define PAGE_HEIGHT 8
#include "../scaled_tft.h" #include "../scaled_tft.h"
#define UPSCALE0(M) ((M) * (FSMC_UPSCALE)) #define UPSCALE0(M) ((M) * (GRAPHICAL_TFT_UPSCALE))
#define UPSCALE(A,M) (UPSCALE0(M) + (A)) #define UPSCALE(A,M) (UPSCALE0(M) + (A))
#define X_HI (UPSCALE(LCD_PIXEL_OFFSET_X, WIDTH) - 1) #define X_HI (UPSCALE(TFT_PIXEL_OFFSET_X, WIDTH) - 1)
#define Y_HI (UPSCALE(LCD_PIXEL_OFFSET_Y, HEIGHT) - 1) #define Y_HI (UPSCALE(TFT_PIXEL_OFFSET_Y, HEIGHT) - 1)
// see https://ee-programming-notepad.blogspot.com/2016/10/16-bit-color-generator-picker.html // see https://ee-programming-notepad.blogspot.com/2016/10/16-bit-color-generator-picker.html
@ -156,7 +152,8 @@ static uint32_t lcd_id = 0;
static void setWindow_ili9328(u8g_t *u8g, u8g_dev_t *dev, uint16_t Xmin, uint16_t Ymin, uint16_t Xmax, uint16_t Ymax) { static void setWindow_ili9328(u8g_t *u8g, u8g_dev_t *dev, uint16_t Xmin, uint16_t Ymin, uint16_t Xmax, uint16_t Ymax) {
#if HAS_LCD_IO #if HAS_LCD_IO
#define IO_REG_DATA(R,D) do { LCD_IO_WriteReg(R); LCD_IO_WriteData(D); }while(0) tftio.DataTransferBegin(DATASIZE_8BIT);
#define IO_REG_DATA(R,D) do { tftio.WriteReg(R); tftio.WriteData(D); }while(0)
#else #else
#define IO_REG_DATA(R,D) do { u8g_WriteByte(u8g, dev, R); u8g_WriteSequence(u8g, dev, 2, (uint8_t *)&D); }while(0) #define IO_REG_DATA(R,D) do { u8g_WriteByte(u8g, dev, R); u8g_WriteSequence(u8g, dev, 2, (uint8_t *)&D); }while(0)
#endif #endif
@ -174,7 +171,8 @@ static void setWindow_ili9328(u8g_t *u8g, u8g_dev_t *dev, uint16_t Xmin, uint16_
IO_REG_DATA(ILI9328_VASET, Xmin); IO_REG_DATA(ILI9328_VASET, Xmin);
#if HAS_LCD_IO #if HAS_LCD_IO
LCD_IO_WriteReg(ILI9328_WRITE_RAM); tftio.WriteReg(ILI9328_WRITE_RAM);
tftio.DataTransferEnd();
#else #else
u8g_WriteByte(u8g, dev, ILI9328_WRITE_RAM); u8g_WriteByte(u8g, dev, ILI9328_WRITE_RAM);
u8g_SetAddress(u8g, dev, 1); u8g_SetAddress(u8g, dev, 1);
@ -183,19 +181,21 @@ static void setWindow_ili9328(u8g_t *u8g, u8g_dev_t *dev, uint16_t Xmin, uint16_
static void setWindow_st7789v(u8g_t *u8g, u8g_dev_t *dev, uint16_t Xmin, uint16_t Ymin, uint16_t Xmax, uint16_t Ymax) { static void setWindow_st7789v(u8g_t *u8g, u8g_dev_t *dev, uint16_t Xmin, uint16_t Ymin, uint16_t Xmax, uint16_t Ymax) {
#if HAS_LCD_IO #if HAS_LCD_IO
LCD_IO_WriteReg(ST7789V_CASET); tftio.DataTransferBegin(DATASIZE_8BIT);
LCD_IO_WriteData((Xmin >> 8) & 0xFF); tftio.WriteReg(ST7789V_CASET);
LCD_IO_WriteData(Xmin & 0xFF); tftio.WriteData((Xmin >> 8) & 0xFF);
LCD_IO_WriteData((Xmax >> 8) & 0xFF); tftio.WriteData(Xmin & 0xFF);
LCD_IO_WriteData(Xmax & 0xFF); tftio.WriteData((Xmax >> 8) & 0xFF);
tftio.WriteData(Xmax & 0xFF);
LCD_IO_WriteReg(ST7789V_RASET); tftio.WriteReg(ST7789V_RASET);
LCD_IO_WriteData((Ymin >> 8) & 0xFF); tftio.WriteData((Ymin >> 8) & 0xFF);
LCD_IO_WriteData(Ymin & 0xFF); tftio.WriteData(Ymin & 0xFF);
LCD_IO_WriteData((Ymax >> 8) & 0xFF); tftio.WriteData((Ymax >> 8) & 0xFF);
LCD_IO_WriteData(Ymax & 0xFF); tftio.WriteData(Ymax & 0xFF);
LCD_IO_WriteReg(ST7789V_WRITE_RAM); tftio.WriteReg(ST7789V_WRITE_RAM);
tftio.DataTransferEnd();
#else #else
u8g_SetAddress(u8g, dev, 0); u8g_WriteByte(u8g, dev, ST7789V_CASET); u8g_SetAddress(u8g, dev, 1); u8g_SetAddress(u8g, dev, 0); u8g_WriteByte(u8g, dev, ST7789V_CASET); u8g_SetAddress(u8g, dev, 1);
u8g_WriteByte(u8g, dev, (Xmin >> 8) & 0xFF); u8g_WriteByte(u8g, dev, (Xmin >> 8) & 0xFF);
@ -227,17 +227,17 @@ void (*setWindow)(u8g_t *u8g, u8g_dev_t *dev, uint16_t Xmin, uint16_t Ymin, uint
for (;;) { for (;;) {
data = *sequence++; data = *sequence++;
if (data != 0xFFFF) { if (data != 0xFFFF) {
LCD_IO_WriteData(data); tftio.WriteData(data);
continue; continue;
} }
data = *sequence++; data = *sequence++;
if (data == 0x7FFF) return; if (data == 0x7FFF) return;
if (data == 0xFFFF) { if (data == 0xFFFF) {
LCD_IO_WriteData(data); tftio.WriteData(data);
} else if (data & 0x8000) { } else if (data & 0x8000) {
delay(data & 0x7FFF); delay(data & 0x7FFF);
} else if ((data & 0xFF00) == 0) { } else if ((data & 0xFF00) == 0) {
LCD_IO_WriteReg(data); tftio.WriteReg(data);
} }
} }
} }
@ -591,7 +591,7 @@ static const uint16_t st7796_init[] = {
#define BUTTON_Y_HI (UPSCALE(BUTTON_Y_LO, BUTTON_SIZE_Y) - 1) #define BUTTON_Y_HI (UPSCALE(BUTTON_Y_LO, BUTTON_SIZE_Y) - 1)
void drawImage(const uint8_t *data, u8g_t *u8g, u8g_dev_t *dev, uint16_t length, uint16_t height, uint16_t color) { void drawImage(const uint8_t *data, u8g_t *u8g, u8g_dev_t *dev, uint16_t length, uint16_t height, uint16_t color) {
uint16_t buffer[BUTTON_SIZE_X * sq(FSMC_UPSCALE)]; uint16_t buffer[BUTTON_SIZE_X * sq(GRAPHICAL_TFT_UPSCALE)];
if (length > BUTTON_SIZE_X) return; if (length > BUTTON_SIZE_X) return;
@ -603,16 +603,16 @@ static const uint16_t st7796_init[] = {
v = color; v = color;
else else
v = TFT_MARLINBG_COLOR; v = TFT_MARLINBG_COLOR;
LOOP_L_N(n, FSMC_UPSCALE) buffer[k++] = v; LOOP_L_N(n, GRAPHICAL_TFT_UPSCALE) buffer[k++] = v;
} }
#if HAS_LCD_IO #if HAS_LCD_IO
LOOP_S_L_N(n, 1, FSMC_UPSCALE) LOOP_S_L_N(n, 1, GRAPHICAL_TFT_UPSCALE)
for (uint16_t l = 0; l < UPSCALE0(length); l++) for (uint16_t l = 0; l < UPSCALE0(length); l++)
buffer[l + n * UPSCALE0(length)] = buffer[l]; buffer[l + n * UPSCALE0(length)] = buffer[l];
LCD_IO_WriteSequence(buffer, length * sq(FSMC_UPSCALE)); tftio.WriteSequence(buffer, length * sq(GRAPHICAL_TFT_UPSCALE));
#else #else
for (uint8_t i = FSMC_UPSCALE; i--;) for (uint8_t i = GRAPHICAL_TFT_UPSCALE; i--;)
u8g_WriteSequence(u8g, dev, k << 1, (uint8_t*)buffer); u8g_WriteSequence(u8g, dev, k << 1, (uint8_t*)buffer);
#endif #endif
} }
@ -632,22 +632,17 @@ static uint8_t page;
uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) { uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
#if ENABLED(SPI_GRAPHICAL_TFT)
LCD_IO_Init(-1, -1);
#endif
#if HAS_LCD_IO #if HAS_LCD_IO
static uint16_t bufferA[WIDTH * sq(FSMC_UPSCALE)], bufferB[WIDTH * sq(FSMC_UPSCALE)]; static uint16_t bufferA[WIDTH * sq(GRAPHICAL_TFT_UPSCALE)], bufferB[WIDTH * sq(GRAPHICAL_TFT_UPSCALE)];
uint16_t* buffer = &bufferA[0]; uint16_t* buffer = &bufferA[0];
bool allow_async = DISABLED(SPI_GRAPHICAL_TFT);
#else #else
uint16_t buffer[WIDTH * FSMC_UPSCALE]; // 16-bit RGB 565 pixel line buffer uint16_t buffer[WIDTH * GRAPHICAL_TFT_UPSCALE]; // 16-bit RGB 565 pixel line buffer
#endif #endif
switch (msg) { switch (msg) {
case U8G_DEV_MSG_INIT: case U8G_DEV_MSG_INIT:
dev->com_fn(u8g, U8G_COM_MSG_INIT, U8G_SPI_CLK_CYCLE_NONE, &lcd_id); dev->com_fn(u8g, U8G_COM_MSG_INIT, U8G_SPI_CLK_CYCLE_NONE, &lcd_id);
tftio.DataTransferBegin(DATASIZE_8BIT);
switch (lcd_id & 0xFFFF) { switch (lcd_id & 0xFFFF) {
case 0x8552: // ST7789V case 0x8552: // ST7789V
WRITE_ESC_SEQUENCE(st7789v_init); WRITE_ESC_SEQUENCE(st7789v_init);
@ -682,6 +677,7 @@ uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, u
setWindow = (lcd_id & 0xFF000000) ? setWindow_st7789v : setWindow_ili9328; setWindow = (lcd_id & 0xFF000000) ? setWindow_st7789v : setWindow_ili9328;
break; break;
} }
tftio.DataTransferEnd();
if (preinit) { if (preinit) {
preinit = false; preinit = false;
@ -689,13 +685,13 @@ uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, u
} }
// Clear Screen // Clear Screen
setWindow(u8g, dev, 0, 0, (LCD_FULL_PIXEL_WIDTH) - 1, (LCD_FULL_PIXEL_HEIGHT) - 1); setWindow(u8g, dev, 0, 0, (TFT_WIDTH) - 1, (TFT_HEIGHT) - 1);
#if HAS_LCD_IO #if HAS_LCD_IO
LCD_IO_WriteMultiple(TFT_MARLINBG_COLOR, (LCD_FULL_PIXEL_WIDTH) * (LCD_FULL_PIXEL_HEIGHT)); tftio.WriteMultiple(TFT_MARLINBG_COLOR, uint32_t(TFT_WIDTH) * (TFT_HEIGHT));
#else #else
memset2(buffer, TFT_MARLINBG_COLOR, (LCD_FULL_PIXEL_WIDTH) / 2); memset2(buffer, TFT_MARLINBG_COLOR, (TFT_WIDTH) / 2);
for (uint16_t i = 0; i < (LCD_FULL_PIXEL_HEIGHT) * sq(FSMC_UPSCALE); i++) for (uint16_t i = 0; i < (TFT_HEIGHT) * sq(GRAPHICAL_TFT_UPSCALE); i++)
u8g_WriteSequence(u8g, dev, LCD_FULL_PIXEL_WIDTH / 2, (uint8_t *)buffer); u8g_WriteSequence(u8g, dev, (TFT_WIDTH) / 2, (uint8_t *)buffer);
#endif #endif
// Bottom buttons // Bottom buttons
@ -719,7 +715,7 @@ uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, u
case U8G_DEV_MSG_PAGE_FIRST: case U8G_DEV_MSG_PAGE_FIRST:
page = 0; page = 0;
setWindow(u8g, dev, LCD_PIXEL_OFFSET_X, LCD_PIXEL_OFFSET_Y, X_HI, Y_HI); setWindow(u8g, dev, TFT_PIXEL_OFFSET_X, TFT_PIXEL_OFFSET_Y, X_HI, Y_HI);
break; break;
case U8G_DEV_MSG_PAGE_NEXT: case U8G_DEV_MSG_PAGE_NEXT:
@ -733,26 +729,18 @@ uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, u
for (uint16_t i = 0; i < (uint32_t)pb->width; i++) { for (uint16_t i = 0; i < (uint32_t)pb->width; i++) {
const uint8_t b = *(((uint8_t *)pb->buf) + i); const uint8_t b = *(((uint8_t *)pb->buf) + i);
const uint16_t c = TEST(b, y) ? TFT_MARLINUI_COLOR : TFT_MARLINBG_COLOR; const uint16_t c = TEST(b, y) ? TFT_MARLINUI_COLOR : TFT_MARLINBG_COLOR;
LOOP_L_N(n, FSMC_UPSCALE) buffer[k++] = c; LOOP_L_N(n, GRAPHICAL_TFT_UPSCALE) buffer[k++] = c;
} }
#if HAS_LCD_IO #if HAS_LCD_IO
LOOP_S_L_N(n, 1, FSMC_UPSCALE) LOOP_S_L_N(n, 1, GRAPHICAL_TFT_UPSCALE)
for (uint16_t l = 0; l < UPSCALE0(WIDTH); l++) for (uint16_t l = 0; l < UPSCALE0(WIDTH); l++)
buffer[l + n * UPSCALE0(WIDTH)] = buffer[l]; buffer[l + n * UPSCALE0(WIDTH)] = buffer[l];
if (allow_async) { tftio.WriteSequence(buffer, COUNT(bufferA));
if (y > 0 || page > 1) LCD_IO_WaitSequence_Async();
if (y == 7 && page == 8)
LCD_IO_WriteSequence(buffer, COUNT(bufferA)); // last line of last page
else
LCD_IO_WriteSequence_Async(buffer, COUNT(bufferA));
}
else
LCD_IO_WriteSequence(buffer, COUNT(bufferA));
#else #else
uint8_t* bufptr = (uint8_t*) buffer; uint8_t* bufptr = (uint8_t*) buffer;
for (uint8_t i = FSMC_UPSCALE; i--;) { for (uint8_t i = GRAPHICAL_TFT_UPSCALE; i--;) {
LOOP_S_L_N(n, 0, FSMC_UPSCALE * 2) { LOOP_S_L_N(n, 0, GRAPHICAL_TFT_UPSCALE * 2) {
u8g_WriteSequence(u8g, dev, WIDTH, &bufptr[WIDTH * n]); u8g_WriteSequence(u8g, dev, WIDTH, &bufptr[WIDTH * n]);
} }
} }
@ -770,6 +758,59 @@ uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, u
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg); return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
} }
U8G_PB_DEV(u8g_dev_tft_320x240_upscale_from_128x64, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_tft_320x240_upscale_from_128x64_fn, U8G_COM_HAL_FSMC_FN); static uint8_t msgInitCount = 2; // Ignore all messages until 2nd U8G_COM_MSG_INIT
uint8_t u8g_com_stm32duino_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
if (msgInitCount) {
if (msg == U8G_COM_MSG_INIT) msgInitCount--;
if (msgInitCount) return -1;
}
static uint8_t isCommand;
switch (msg) {
case U8G_COM_MSG_STOP: break;
case U8G_COM_MSG_INIT:
u8g_SetPIOutput(u8g, U8G_PI_RESET);
u8g_Delay(50);
tftio.Init();
if (arg_ptr) {
*((uint32_t *)arg_ptr) = tftio.GetID();
}
isCommand = 0;
break;
case U8G_COM_MSG_ADDRESS: // define cmd (arg_val = 0) or data mode (arg_val = 1)
isCommand = arg_val == 0 ? 1 : 0;
break;
case U8G_COM_MSG_RESET:
u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_WRITE_BYTE:
tftio.DataTransferBegin(DATASIZE_8BIT);
if (isCommand)
tftio.WriteReg(arg_val);
else
tftio.WriteData((uint16_t)arg_val);
tftio.DataTransferEnd();
break;
case U8G_COM_MSG_WRITE_SEQ:
tftio.DataTransferBegin(DATASIZE_8BIT);
for (uint8_t i = 0; i < arg_val; i += 2)
tftio.WriteData(*(uint16_t *)(((uint32_t)arg_ptr) + i));
tftio.DataTransferEnd();
break;
}
return 1;
}
U8G_PB_DEV(u8g_dev_tft_320x240_upscale_from_128x64, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_tft_320x240_upscale_from_128x64_fn, U8G_COM_HAL_TFT_FN);
#endif // HAS_GRAPHICAL_LCD && FSMC_CS #endif // HAS_GRAPHICAL_LCD && FSMC_CS

39
Marlin/src/lcd/extui/lib/mks_ui/SPI_TFT.cpp
View file

@ -33,25 +33,6 @@
TFT SPI_TFT; TFT SPI_TFT;
#ifndef SPI_TFT_MISO_PIN
#define SPI_TFT_MISO_PIN PA6
#endif
#ifndef SPI_TFT_MOSI_PIN
#define SPI_TFT_MOSI_PIN PA7
#endif
#ifndef SPI_TFT_SCK_PIN
#define SPI_TFT_SCK_PIN PA5
#endif
#ifndef SPI_TFT_CS_PIN
#define SPI_TFT_CS_PIN PD11
#endif
#ifndef SPI_TFT_DC_PIN
#define SPI_TFT_DC_PIN PD10
#endif
#ifndef SPI_TFT_RST_PIN
#define SPI_TFT_RST_PIN PC6
#endif
// use SPI1 for the spi tft. // use SPI1 for the spi tft.
void TFT::spi_init(uint8_t spiRate) { void TFT::spi_init(uint8_t spiRate) {
tftio.Init(); tftio.Init();
@ -93,11 +74,11 @@ void TFT::SetWindows(uint16_t x, uint16_t y, uint16_t with, uint16_t height) {
} }
void TFT::LCD_init() { void TFT::LCD_init() {
SPI_TFT_RST_H; TFT_RST_H;
delay(150); delay(150);
SPI_TFT_RST_L; TFT_RST_L;
delay(150); delay(150);
SPI_TFT_RST_H; TFT_RST_H;
tftio.DataTransferBegin(DATASIZE_8BIT); tftio.DataTransferBegin(DATASIZE_8BIT);
@ -176,22 +157,22 @@ void TFT::LCD_init() {
LCD_clear(0x0000); // LCD_clear(0x0000); //
LCD_Draw_Logo(); LCD_Draw_Logo();
SPI_TFT_BLK_H; TFT_BLK_H;
delay(2000); delay(2000);
} }
void TFT::LCD_clear(uint16_t color) { void TFT::LCD_clear(uint16_t color) {
SetWindows(0, 0, (LCD_FULL_PIXEL_WIDTH) - 1, (LCD_FULL_PIXEL_HEIGHT) - 1); SetWindows(0, 0, (TFT_WIDTH) - 1, (TFT_HEIGHT) - 1);
tftio.WriteMultiple(color, (uint32_t)(LCD_FULL_PIXEL_WIDTH) * (LCD_FULL_PIXEL_HEIGHT)); tftio.WriteMultiple(color, (uint32_t)(TFT_WIDTH) * (TFT_HEIGHT));
} }
extern unsigned char bmp_public_buf[17 * 1024]; extern unsigned char bmp_public_buf[17 * 1024];
void TFT::LCD_Draw_Logo() { void TFT::LCD_Draw_Logo() {
SetWindows(0, 0, LCD_FULL_PIXEL_WIDTH, LCD_FULL_PIXEL_HEIGHT); SetWindows(0, 0, TFT_WIDTH, TFT_HEIGHT);
for (uint16_t i = 0; i < (LCD_FULL_PIXEL_HEIGHT); i ++) { for (uint16_t i = 0; i < (TFT_HEIGHT); i ++) {
Pic_Logo_Read((uint8_t *)"", (uint8_t *)bmp_public_buf, (LCD_FULL_PIXEL_WIDTH) * 2); Pic_Logo_Read((uint8_t *)"", (uint8_t *)bmp_public_buf, (TFT_WIDTH) * 2);
tftio.WriteSequence((uint16_t *)bmp_public_buf, LCD_FULL_PIXEL_WIDTH); tftio.WriteSequence((uint16_t *)bmp_public_buf, TFT_WIDTH);
} }
} }

8
Marlin/src/lcd/extui/lib/mks_ui/SPI_TFT.h
View file

@ -29,11 +29,11 @@
#include HAL_PATH(../../HAL, tft/tft_fsmc.h) #include HAL_PATH(../../HAL, tft/tft_fsmc.h)
#endif #endif
#define SPI_TFT_RST_H OUT_WRITE(SPI_TFT_RST_PIN, HIGH) #define TFT_RST_H OUT_WRITE(TFT_RESET_PIN, HIGH)
#define SPI_TFT_RST_L OUT_WRITE(SPI_TFT_RST_PIN, LOW) #define TFT_RST_L OUT_WRITE(TFT_RESET_PIN, LOW)
#define SPI_TFT_BLK_H OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH) #define TFT_BLK_H OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH)
#define SPI_TFT_BLK_L OUT_WRITE(LCD_BACKLIGHT_PIN, LOW) #define TFT_BLK_L OUT_WRITE(LCD_BACKLIGHT_PIN, LOW)
class TFT { class TFT {
public: public:

6
Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp
View file

@ -653,10 +653,10 @@ char *creat_title_text() {
i += 2; i += 2;
if (*p_index == 0x0000) *p_index = 0xC318; if (*p_index == 0x0000) *p_index = 0xC318;
} }
SPI_TFT_CS_L; TFT_CS_L;
SPI_TFT_DC_H; TFT_DC_H;
SPI.dmaSend(bmp_public_buf, 400, true); SPI.dmaSend(bmp_public_buf, 400, true);
SPI_TFT_CS_H; TFT_CS_H;
#else #else
for (i = 0; i < 400;) { for (i = 0; i < 400;) {

2
Marlin/src/lcd/extui/lib/mks_ui/mks_hardware_test.cpp
View file

@ -34,8 +34,6 @@
#include "pic_manager.h" #include "pic_manager.h"
#include <lvgl.h> #include <lvgl.h>
#include "../../../touch/xpt2046.h"
#include "../../../../MarlinCore.h" #include "../../../../MarlinCore.h"
#include "../../../../module/temperature.h" #include "../../../../module/temperature.h"
#include "../../../../sd/cardreader.h" #include "../../../../sd/cardreader.h"

30
Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp
View file

@ -51,11 +51,11 @@ XPT2046 touch;
#include <SPI.h> #include <SPI.h>
#ifndef LCD_FULL_PIXEL_WIDTH #ifndef TFT_WIDTH
#define LCD_FULL_PIXEL_WIDTH 480 #define TFT_WIDTH 480
#endif #endif
#ifndef LCD_FULL_PIXEL_HEIGHT #ifndef TFT_HEIGHT
#define LCD_FULL_PIXEL_HEIGHT 320 #define TFT_HEIGHT 320
#endif #endif
#if HAS_SPI_FLASH_FONT #if HAS_SPI_FLASH_FONT
@ -135,7 +135,7 @@ void LCD_WriteRAM_Prepare(void) {
void tft_set_point(uint16_t x, uint16_t y, uint16_t point) { void tft_set_point(uint16_t x, uint16_t y, uint16_t point) {
//if (DeviceCode == 0x9488) { //if (DeviceCode == 0x9488) {
if (x > (LCD_FULL_PIXEL_WIDTH) || y > (LCD_FULL_PIXEL_HEIGHT)) return; if (x > (TFT_WIDTH) || y > (TFT_HEIGHT)) return;
//} //}
tft_set_cursor(x, y); tft_set_cursor(x, y);
@ -196,8 +196,8 @@ void ili9320_SetWindows(uint16_t StartX, uint16_t StartY, uint16_t width, uint16
LCD_WriteReg(0x0053, yEnd);*/ LCD_WriteReg(0x0053, yEnd);*/
LCD_WriteReg(0x0050, StartY); // Specify the start/end positions of the window address in the horizontal direction by an address unit LCD_WriteReg(0x0050, StartY); // Specify the start/end positions of the window address in the horizontal direction by an address unit
LCD_WriteReg(0x0051, yEnd); // Specify the start positions of the window address in the vertical direction by an address unit LCD_WriteReg(0x0051, yEnd); // Specify the start positions of the window address in the vertical direction by an address unit
LCD_WriteReg(0x0052, (LCD_FULL_PIXEL_HEIGHT) - xEnd); LCD_WriteReg(0x0052, (TFT_HEIGHT) - xEnd);
LCD_WriteReg(0x0053, (LCD_FULL_PIXEL_HEIGHT) - StartX - 1); // Specify the end positions of the window address in the vertical direction by an address unit LCD_WriteReg(0x0053, (TFT_HEIGHT) - StartX - 1); // Specify the end positions of the window address in the vertical direction by an address unit
} }
else { else {
@ -231,16 +231,16 @@ void LCD_Clear(uint16_t Color) {
if (DeviceCode == 0x9488) { if (DeviceCode == 0x9488) {
tft_set_cursor(0, 0); tft_set_cursor(0, 0);
ili9320_SetWindows(0, 0, LCD_FULL_PIXEL_WIDTH, LCD_FULL_PIXEL_HEIGHT); ili9320_SetWindows(0, 0, TFT_WIDTH, TFT_HEIGHT);
LCD_WriteRAM_Prepare(); LCD_WriteRAM_Prepare();
#ifdef LCD_USE_DMA_FSMC #ifdef LCD_USE_DMA_FSMC
LCD_IO_WriteMultiple(Color, (LCD_FULL_PIXEL_WIDTH) * (LCD_FULL_PIXEL_HEIGHT)); LCD_IO_WriteMultiple(Color, (TFT_WIDTH) * (TFT_HEIGHT));
#else #else
//index = (LCD_FULL_PIXEL_HEIGHT) / 2 * (LCD_FULL_PIXEL_WIDTH); //index = (TFT_HEIGHT) / 2 * (TFT_WIDTH);
for (index = 0; index < (LCD_FULL_PIXEL_HEIGHT) * (LCD_FULL_PIXEL_WIDTH); index++) for (index = 0; index < (TFT_HEIGHT) * (TFT_WIDTH); index++)
LCD_IO_WriteData(Color); LCD_IO_WriteData(Color);
#endif #endif
//LCD_IO_WriteMultiple(Color, (LCD_FULL_PIXEL_WIDTH) * (LCD_FULL_PIXEL_HEIGHT)); //LCD_IO_WriteMultiple(Color, (TFT_WIDTH) * (TFT_HEIGHT));
//while(index --) LCD_IO_WriteData(Color); //while(index --) LCD_IO_WriteData(Color);
} }
else if (DeviceCode == 0x5761) { else if (DeviceCode == 0x5761) {
@ -378,7 +378,7 @@ void init_tft() {
for (i = 0; i < 65535; i++); for (i = 0; i < 65535; i++);
LCD_IO_WriteReg(0x0029); LCD_IO_WriteReg(0x0029);
ili9320_SetWindows(0, 0, LCD_FULL_PIXEL_WIDTH, LCD_FULL_PIXEL_HEIGHT); ili9320_SetWindows(0, 0, TFT_WIDTH, TFT_HEIGHT);
LCD_Clear(0x0000); LCD_Clear(0x0000);
OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH); OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH);
@ -522,8 +522,8 @@ static bool get_point(int16_t *x, int16_t *y) {
} }
#if ENABLED(GRAPHICAL_TFT_ROTATE_180) #if ENABLED(GRAPHICAL_TFT_ROTATE_180)
x = (LCD_FULL_PIXEL_WIDTH) - x; x = (TFT_WIDTH) - x;
y = (LCD_FULL_PIXEL_HEIGHT) - y; y = (TFT_HEIGHT) - y;
#endif #endif
return is_touched; return is_touched;

28
Marlin/src/lcd/scaled_tft.h
View file

@ -23,28 +23,28 @@
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"
#ifndef FSMC_UPSCALE #ifndef GRAPHICAL_TFT_UPSCALE
#define FSMC_UPSCALE 2 #define GRAPHICAL_TFT_UPSCALE 2
#endif #endif
#ifndef LCD_FULL_PIXEL_WIDTH #ifndef TFT_WIDTH
#if FSMC_UPSCALE == 3 #if GRAPHICAL_TFT_UPSCALE == 3
#define LCD_FULL_PIXEL_WIDTH 480 #define TFT_WIDTH 480
#else #else
#define LCD_FULL_PIXEL_WIDTH 320 #define TFT_WIDTH 320
#endif #endif
#endif #endif
#ifndef LCD_FULL_PIXEL_HEIGHT #ifndef TFT_HEIGHT
#if FSMC_UPSCALE == 3 #if GRAPHICAL_TFT_UPSCALE == 3
#define LCD_FULL_PIXEL_HEIGHT 320 #define TFT_HEIGHT 320
#else #else
#define LCD_FULL_PIXEL_HEIGHT 240 #define TFT_HEIGHT 240
#endif #endif
#endif #endif
#ifndef LCD_PIXEL_OFFSET_X #ifndef TFT_PIXEL_OFFSET_X
#define LCD_PIXEL_OFFSET_X 48 #define TFT_PIXEL_OFFSET_X 48
#endif #endif
#ifndef LCD_PIXEL_OFFSET_Y #ifndef TFT_PIXEL_OFFSET_Y
#define LCD_PIXEL_OFFSET_Y 48 #define TFT_PIXEL_OFFSET_Y 48
#endif #endif

112
Marlin/src/lcd/touch/touch_buttons.cpp Normal file
View file

@ -0,0 +1,112 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_TOUCH_XPT2046
#include "touch_buttons.h"
#include "../scaled_tft.h"
#include HAL_PATH(../../HAL, tft/xpt2046.h)
XPT2046 touchIO;
#include "../../lcd/ultralcd.h" // For EN_C bit mask
/**
* Draw and Touch processing
*
* LCD_PIXEL_WIDTH/HEIGHT (128x64) is the (emulated DOGM) Pixel Drawing resolution.
* TOUCH_SENSOR_WIDTH/HEIGHT (320x240) is the Touch Area resolution.
* TFT_WIDTH/HEIGHT (320x240 or 480x320) is the Actual (FSMC) Display resolution.
*
* - All native (u8g) drawing is done in LCD_PIXEL_* (128x64)
* - The DOGM pixels are is upscaled 2-3x (as needed) for display.
* - Touch coordinates use TOUCH_SENSOR_* resolution and are converted to
* click and scroll-wheel events (emulating of a common DOGM display).
*
* TOUCH_SCREEN resolution exists to fit our calibration values. The original touch code was made
* and originally calibrated for 320x240. If you decide to change the resolution of the touch code,
* new calibration values will be needed.
*
* The Marlin menus are drawn scaled in the upper region of the screen. The bottom region (in a
* fixed location in TOUCH_SCREEN* coordinate space) is used for 4 general-purpose buttons to
* navigate and select menu items. Both regions are touchable.
*
* The Marlin screen touchable area starts at TFT_PIXEL_OFFSET_X/Y (translated to SCREEN_PCT_LEFT/TOP)
* and spans LCD_PIXEL_WIDTH/HEIGHT (scaled to SCREEN_PCT_WIDTH/HEIGHT).
*/
// Touch sensor resolution independent of display resolution
#define TOUCH_SENSOR_WIDTH 320
#define TOUCH_SENSOR_HEIGHT 240
#define SCREEN_PCT_WIDE(X) ((X) * (TOUCH_SENSOR_WIDTH) / (TFT_WIDTH))
#define SCREEN_PCT_HIGH(Y) ((Y) * (TOUCH_SENSOR_HEIGHT) / (TFT_HEIGHT))
#define SCREEN_PCT_LEFT SCREEN_PCT_WIDE(TFT_PIXEL_OFFSET_X)
#define SCREEN_PCT_TOP SCREEN_PCT_HIGH(TFT_PIXEL_OFFSET_Y)
#define SCREEN_PCT_WIDTH SCREEN_PCT_WIDE((GRAPHICAL_TFT_UPSCALE) * (LCD_PIXEL_WIDTH))
#define SCREEN_PCT_HEIGHT SCREEN_PCT_HIGH((GRAPHICAL_TFT_UPSCALE) * (LCD_PIXEL_HEIGHT))
// Coordinates in terms of 240-unit-tall touch area
#define BUTTON_AREA_TOP 175
#define BUTTON_AREA_BOT 234
TouchButtons touch;
void TouchButtons::init() { touchIO.Init(); }
uint8_t TouchButtons::read_buttons() {
#ifdef HAS_SPI_LCD
int16_t x, y;
if (!touchIO.getRawPoint(&x, &y)) return 0;
x = uint16_t((uint32_t(x) * XPT2046_X_CALIBRATION) >> 16) + XPT2046_X_OFFSET;
y = uint16_t((uint32_t(y) * XPT2046_Y_CALIBRATION) >> 16) + XPT2046_Y_OFFSET;
#if ENABLED(GRAPHICAL_TFT_ROTATE_180)
x = TOUCH_SENSOR_WIDTH - x;
y = TOUCH_SENSOR_HEIGHT - y;
#endif
// Touch within the button area simulates an encoder button
if (y > BUTTON_AREA_TOP && y < BUTTON_AREA_BOT)
return WITHIN(x, 14, 77) ? EN_D
: WITHIN(x, 90, 153) ? EN_A
: WITHIN(x, 166, 229) ? EN_B
: WITHIN(x, 242, 305) ? EN_C
: 0;
if ( !WITHIN(x, SCREEN_PCT_LEFT, SCREEN_PCT_LEFT + SCREEN_PCT_WIDTH)
|| !WITHIN(y, SCREEN_PCT_TOP, SCREEN_PCT_TOP + SCREEN_PCT_HEIGHT)
) return 0;
// Column and row above BUTTON_AREA_TOP
int8_t col = (x - (SCREEN_PCT_LEFT)) * (LCD_WIDTH) / (SCREEN_PCT_WIDTH),
row = (y - (SCREEN_PCT_TOP)) * (LCD_HEIGHT) / (SCREEN_PCT_HEIGHT);
// Send the touch to the UI (which will simulate the encoder wheel)
MarlinUI::screen_click(row, col, x, y);
#endif
return 0;
}
#endif // HAS_TOUCH_XPT2046

24
Marlin/src/lcd/touch/xpt2046.h → Marlin/src/lcd/touch/touch_buttons.h
View file

@ -20,30 +20,10 @@
#include <stdint.h> #include <stdint.h>
// Relies on XPT2046-compatible mode of ADS7843, class TouchButtons {
// hence no Z1 / Z2 measurements are possible.
#define XPT2046_DFR_MODE 0x00
#define XPT2046_SER_MODE 0x04
#define XPT2046_CONTROL 0x80
enum XPTCoordinate : uint8_t {
XPT2046_X = 0x10,
XPT2046_Y = 0x50,
XPT2046_Z1 = 0x30,
XPT2046_Z2 = 0x40
};
class XPT2046 {
public: public:
static void init(); static void init();
static uint8_t read_buttons(); static uint8_t read_buttons();
bool getTouchPoint(uint16_t &x, uint16_t &y);
static bool isTouched();
inline void waitForRelease() { while (isTouched()) { /* nada */ } }
inline void waitForTouch(uint16_t &x, uint16_t &y) { while (!getTouchPoint(x, y)) { /* nada */ } }
private:
static uint16_t getInTouch(const XPTCoordinate coordinate);
}; };
extern XPT2046 touch; extern TouchButtons touch;

251
Marlin/src/lcd/touch/xpt2046.cpp
View file

@ -1,251 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_TOUCH_XPT2046
#include "xpt2046.h"
#include "../scaled_tft.h"
#ifndef XPT2046_Z1_THRESHOLD
#define XPT2046_Z1_THRESHOLD 10
#endif
/**
* Draw and Touch processing
*
* LCD_PIXEL_WIDTH/HEIGHT (128x64) is the (emulated DOGM) Pixel Drawing resolution.
* TOUCH_SENSOR_WIDTH/HEIGHT (320x240) is the Touch Area resolution.
* LCD_FULL_PIXEL_WIDTH/HEIGHT (320x240 or 480x320) is the Actual (FSMC) Display resolution.
*
* - All native (u8g) drawing is done in LCD_PIXEL_* (128x64)
* - The DOGM pixels are is upscaled 2-3x (as needed) for display.
* - Touch coordinates use TOUCH_SENSOR_* resolution and are converted to
* click and scroll-wheel events (emulating of a common DOGM display).
*
* TOUCH_SCREEN resolution exists to fit our calibration values. The original touch code was made
* and originally calibrated for 320x240. If you decide to change the resolution of the touch code,
* new calibration values will be needed.
*
* The Marlin menus are drawn scaled in the upper region of the screen. The bottom region (in a
* fixed location in TOUCH_SCREEN* coordinate space) is used for 4 general-purpose buttons to
* navigate and select menu items. Both regions are touchable.
*
* The Marlin screen touchable area starts at LCD_PIXEL_OFFSET_X/Y (translated to SCREEN_START_LEFT/TOP)
* and spans LCD_PIXEL_WIDTH/HEIGHT (scaled to SCREEN_WIDTH/HEIGHT).
*/
// Coordinates in terms of touch area
#define BUTTON_AREA_TOP 175
#define BUTTON_AREA_BOT 234
// Touch sensor resolution independent of display resolution
#define TOUCH_SENSOR_WIDTH 320
#define TOUCH_SENSOR_HEIGHT 240
#define SCREEN_WIDTH_PCT(X) ((X) * (TOUCH_SENSOR_WIDTH) / (LCD_FULL_PIXEL_WIDTH))
#define SCREEN_HEIGHT_PCT(Y) ((Y) * (TOUCH_SENSOR_HEIGHT) / (LCD_FULL_PIXEL_HEIGHT))
#define SCREEN_START_LEFT SCREEN_WIDTH_PCT(LCD_PIXEL_OFFSET_X)
#define SCREEN_START_TOP SCREEN_HEIGHT_PCT(LCD_PIXEL_OFFSET_Y)
#define SCREEN_WIDTH SCREEN_WIDTH_PCT((LCD_PIXEL_WIDTH) * (FSMC_UPSCALE))
#define SCREEN_HEIGHT SCREEN_HEIGHT_PCT((LCD_PIXEL_HEIGHT) * (FSMC_UPSCALE))
#define TOUCHABLE_X_WIDTH SCREEN_WIDTH
#define TOUCHABLE_Y_HEIGHT SCREEN_HEIGHT
#ifndef TOUCH_INT_PIN
#define TOUCH_INT_PIN -1
#endif
#ifndef TOUCH_MISO_PIN
#define TOUCH_MISO_PIN MISO_PIN
#endif
#ifndef TOUCH_MOSI_PIN
#define TOUCH_MOSI_PIN MOSI_PIN
#endif
#ifndef TOUCH_SCK_PIN
#define TOUCH_SCK_PIN SCK_PIN
#endif
#ifndef TOUCH_CS_PIN
#define TOUCH_CS_PIN CS_PIN
#endif
XPT2046 touch;
void XPT2046::init() {
SET_INPUT(TOUCH_MISO_PIN);
SET_OUTPUT(TOUCH_MOSI_PIN);
SET_OUTPUT(TOUCH_SCK_PIN);
OUT_WRITE(TOUCH_CS_PIN, HIGH);
#if PIN_EXISTS(TOUCH_INT)
// Optional Pendrive interrupt pin
SET_INPUT(TOUCH_INT_PIN);
#endif
// Read once to enable pendrive status pin
getInTouch(XPT2046_X);
}
#include "../../lcd/ultralcd.h" // For EN_C bit mask
uint8_t XPT2046::read_buttons() {
#ifdef HAS_SPI_LCD
int16_t tsoffsets[4] = { 0 };
if (tsoffsets[0] + tsoffsets[1] == 0) {
// Not yet set, so use defines as fallback...
tsoffsets[0] = XPT2046_X_CALIBRATION;
tsoffsets[1] = XPT2046_X_OFFSET;
tsoffsets[2] = XPT2046_Y_CALIBRATION;
tsoffsets[3] = XPT2046_Y_OFFSET;
}
// We rely on XPT2046 compatible mode to ADS7843, hence no Z1 and Z2 measurements possible.
if (!isTouched()) return 0;
uint16_t x = uint16_t(((uint32_t(getInTouch(XPT2046_X))) * tsoffsets[0]) >> 16) + tsoffsets[1],
y = uint16_t(((uint32_t(getInTouch(XPT2046_Y))) * tsoffsets[2]) >> 16) + tsoffsets[3];
if (!isTouched()) return 0; // Fingers must still be on the TS for a valid read.
#if ENABLED(GRAPHICAL_TFT_ROTATE_180)
x = TOUCH_SENSOR_WIDTH - x;
y = TOUCH_SENSOR_HEIGHT - y;
#endif
// Touch within the button area simulates an encoder button
if (y > BUTTON_AREA_TOP && y < BUTTON_AREA_BOT)
return WITHIN(x, 14, 77) ? EN_D
: WITHIN(x, 90, 153) ? EN_A
: WITHIN(x, 166, 229) ? EN_B
: WITHIN(x, 242, 305) ? EN_C
: 0;
if ( !WITHIN(x, SCREEN_START_LEFT, SCREEN_START_LEFT + SCREEN_WIDTH)
|| !WITHIN(y, SCREEN_START_TOP, SCREEN_START_TOP + SCREEN_HEIGHT)
) return 0;
// Column and row above BUTTON_AREA_TOP
int8_t col = (x - (SCREEN_START_LEFT)) * (LCD_WIDTH) / (TOUCHABLE_X_WIDTH),
row = (y - (SCREEN_START_TOP)) * (LCD_HEIGHT) / (TOUCHABLE_Y_HEIGHT);
// Send the touch to the UI (which will simulate the encoder wheel)
MarlinUI::screen_click(row, col, x, y);
#endif
return 0;
}
bool XPT2046::isTouched() {
return (
#if PIN_EXISTS(TOUCH_INT)
READ(TOUCH_INT_PIN) != HIGH
#else
getInTouch(XPT2046_Z1) >= XPT2046_Z1_THRESHOLD
#endif
);
}
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
#include <SPI.h>
static void touch_spi_init(uint8_t spiRate) {
/**
* STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
* STM32F1 has 3 SPI ports, SPI1 in APB2, SPI2/SPI3 in APB1
* so the minimum prescale of SPI1 is DIV4, SPI2/SPI3 is DIV2
*/
uint8_t clock;
switch (spiRate) {
case SPI_FULL_SPEED: clock = SPI_CLOCK_DIV4; break;
case SPI_HALF_SPEED: clock = SPI_CLOCK_DIV4; break;
case SPI_QUARTER_SPEED: clock = SPI_CLOCK_DIV8; break;
case SPI_EIGHTH_SPEED: clock = SPI_CLOCK_DIV16; break;
case SPI_SPEED_5: clock = SPI_CLOCK_DIV32; break;
case SPI_SPEED_6: clock = SPI_CLOCK_DIV64; break;
default: clock = SPI_CLOCK_DIV2; // Default from the SPI library
}
SPI.setModule(TOUCH_BUTTONS_HW_SPI_DEVICE);
SPI.begin();
SPI.setClockDivider(clock);
SPI.setBitOrder(MSBFIRST);
SPI.setDataMode(SPI_MODE0);
}
#endif // TOUCH_BUTTONS_HW_SPI
uint16_t XPT2046::getInTouch(const XPTCoordinate coordinate) {
uint16_t data[3];
const uint8_t coord = uint8_t(coordinate) | XPT2046_CONTROL | XPT2046_DFR_MODE;
#if ENABLED(TOUCH_BUTTONS_HW_SPI)
touch_spi_init(SPI_SPEED_6);
for (uint16_t i = 0; i < 3; i++) {
OUT_WRITE(TOUCH_CS_PIN, LOW);
SPI.transfer(coord);
data[i] = (((SPI.transfer(0xFF) << 8) | SPI.transfer(0xFF)) >> 3) & 0x0FFF;
WRITE(TOUCH_CS_PIN, HIGH);
}
#else // !TOUCH_BUTTONS_HW_SPI
OUT_WRITE(TOUCH_CS_PIN, LOW);
for (uint16_t i = 0; i < 3; i++) {
for (uint8_t j = 0x80; j; j >>= 1) {
WRITE(TOUCH_SCK_PIN, LOW);
WRITE(TOUCH_MOSI_PIN, bool(coord & j));
WRITE(TOUCH_SCK_PIN, HIGH);
}
data[i] = 0;
for (uint16_t j = 0x8000; j; j >>= 1) {
WRITE(TOUCH_SCK_PIN, LOW);
if (READ(TOUCH_MISO_PIN)) data[i] |= j;
WRITE(TOUCH_SCK_PIN, HIGH);
}
WRITE(TOUCH_SCK_PIN, LOW);
data[i] >>= 4;
}
WRITE(TOUCH_CS_PIN, HIGH);
#endif // !TOUCH_BUTTONS_HW_SPI
uint16_t delta01 = _MAX(data[0], data[1]) - _MIN(data[0], data[1]),
delta02 = _MAX(data[0], data[2]) - _MIN(data[0], data[2]),
delta12 = _MAX(data[1], data[2]) - _MIN(data[1], data[2]);
if (delta01 <= delta02 && delta01 <= delta12)
return (data[0] + data[1]) >> 1;
if (delta02 <= delta12)
return (data[0] + data[2]) >> 1;
return (data[1] + data[2]) >> 1;
}
bool XPT2046::getTouchPoint(uint16_t &x, uint16_t &y) {
if (isTouched()) {
x = getInTouch(XPT2046_X);
y = getInTouch(XPT2046_Y);
}
return isTouched();
}
#endif // HAS_TOUCH_XPT2046

2
Marlin/src/lcd/ultralcd.cpp
View file

@ -150,7 +150,7 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
volatile uint8_t MarlinUI::slow_buttons; volatile uint8_t MarlinUI::slow_buttons;
#endif #endif
#if HAS_TOUCH_XPT2046 #if HAS_TOUCH_XPT2046
#include "touch/xpt2046.h" #include "touch/touch_buttons.h"
bool MarlinUI::on_edit_screen = false; bool MarlinUI::on_edit_screen = false;
#endif #endif
#endif #endif

131
Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
View file

@ -44,7 +44,7 @@
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#else #else
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
#endif #endif
// //
@ -104,49 +104,6 @@
//#define POWER_LOSS_PIN -1 //#define POWER_LOSS_PIN -1
#define FIL_RUNOUT_PIN PA15 #define FIL_RUNOUT_PIN PA15
//
// TronXY TFT Support
//
//#define FSMC_GRAPHICAL_TFT
//#define HAS_TOUCH_XPT2046 1
#if ENABLED(FSMC_GRAPHICAL_TFT)
#define FSMC_UPSCALE 3
#define LCD_RESET_PIN PF11
#define LCD_BACKLIGHT_PIN PD13
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#if NEED_TOUCH_PINS
#define TOUCH_CS_PIN PB7 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
#define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION -12316
#endif
#ifndef XPT2046_Y_CALIBRATION
#define XPT2046_Y_CALIBRATION 8981
#endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET 340
#endif
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET -20
#endif
#endif
#endif
// SPI Flash // SPI Flash
#define SPI_FLASH_SIZE 0x200000 // 2MB #define SPI_FLASH_SIZE 0x200000 // 2MB
#define HAS_SPI_FLASH 1 #define HAS_SPI_FLASH 1
@ -157,28 +114,18 @@
#define W25QXX_MISO_PIN PB14 #define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13 #define W25QXX_SCK_PIN PB13
#if HAS_TFT_LVGL_UI //
#define HAS_SPI_FLASH_FONT 1 // TronXY TFT Support
#define HAS_GCODE_PREVIEW 1 //
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
#define HAS_LANG_SELECT_SCREEN 1 #if HAS_FSMC_TFT
#define HAS_BAK_VIEW_IN_FLASH 0
#define HAS_LOGO_IN_FLASH 0 // Shared FSMC
#define TOUCH_CS_PIN PB7 // SPI1_NSS #define TOUCH_CS_PIN PB7 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK #define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO #define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
//#define TOUCH_INT_PIN PB6
#if ENABLED(TFT_LVGL_UI_SPI)
#define SPI_TFT_CS_PIN TOUCH_CS_PIN
#define SPI_TFT_SCK_PIN TOUCH_SCK_PIN
#define SPI_TFT_MISO_PIN TOUCH_MISO_PIN
#define SPI_TFT_MOSI_PIN TOUCH_MOSI_PIN
#define SPI_TFT_DC_PIN PB6
#define SPI_TFT_RST_PIN PF11
#endif
#define LCD_RESET_PIN PF11 #define LCD_RESET_PIN PF11
#define LCD_BACKLIGHT_PIN PD13 #define LCD_BACKLIGHT_PIN PD13
@ -191,12 +138,23 @@
#define FSMC_DMA_DEV DMA2 #define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5 #define FSMC_DMA_CHANNEL DMA_CH5
#define LCD_PIXEL_WIDTH 480 #define TFT_WIDTH 480
#define LCD_PIXEL_HEIGHT 320 #define TFT_HEIGHT 320
#define LCD_FULL_PIXEL_WIDTH LCD_PIXEL_WIDTH #define TFT_PIXEL_OFFSET_X 48
#define LCD_FULL_PIXEL_HEIGHT LCD_PIXEL_HEIGHT #define TFT_PIXEL_OFFSET_Y 32
#define LCD_PIXEL_OFFSET_X 48
#define LCD_PIXEL_OFFSET_Y 48 #endif
#if HAS_TFT_LVGL_UI
// LVGL
#define HAS_SPI_FLASH_FONT 1
#define HAS_GCODE_PREVIEW 1
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
#define HAS_LANG_SELECT_SCREEN 1
#define HAS_BAK_VIEW_IN_FLASH 0
#define HAS_LOGO_IN_FLASH 0
#define XPT2046_X_CALIBRATION -17181 #define XPT2046_X_CALIBRATION -17181
#define XPT2046_Y_CALIBRATION 11434 #define XPT2046_Y_CALIBRATION 11434
@ -204,31 +162,38 @@
#define XPT2046_Y_OFFSET -9 #define XPT2046_Y_OFFSET -9
#elif ENABLED(TFT_480x320) #elif ENABLED(TFT_480x320)
#define TFT_RESET_PIN PF11
#define TFT_BACKLIGHT_PIN PD13
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT // Color UI
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11 #define TFT_DRIVER ILI9488
#define FSMC_DMA_DEV DMA2 #define TFT_BUFFER_SIZE 14400
#define FSMC_DMA_CHANNEL DMA_CH5
#define XPT2046_X_CALIBRATION -17181 #define XPT2046_X_CALIBRATION -17181
#define XPT2046_Y_CALIBRATION 11434 #define XPT2046_Y_CALIBRATION 11434
#define XPT2046_X_OFFSET 501 #define XPT2046_X_OFFSET 501
#define XPT2046_Y_OFFSET -9 #define XPT2046_Y_OFFSET -9
#define TOUCH_CS_PIN PB7 // SPI1_NSS #elif ENABLED(FSMC_GRAPHICAL_TFT)
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define TFT_DRIVER ILI9488 // Emulated DOGM
#define TFT_BUFFER_SIZE 14400
#define GRAPHICAL_TFT_UPSCALE 3
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION -12316
#endif
#ifndef XPT2046_Y_CALIBRATION
#define XPT2046_Y_CALIBRATION 8981
#endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET 340
#endif
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET -20
#endif
#endif #endif
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available // SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
// We nee to use the SPI2 // Needs to use SPI2
#define ENABLE_SPI2 #define ENABLE_SPI2
#define SCK_PIN PB13 #define SCK_PIN PB13
#define MISO_PIN PB14 #define MISO_PIN PB14
@ -240,5 +205,5 @@
// //
#define SDIO_SUPPORT #define SDIO_SUPPORT
#define SD_DETECT_PIN -1 // PF0, but it isn't connected #define SD_DETECT_PIN -1 // PF0, but it isn't connected
#define SDIO_CLOCK 4500000 #define SDIO_CLOCK 4500000
#define SDIO_READ_RETRIES 16 #define SDIO_READ_RETRIES 16

147
Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h
View file

@ -48,7 +48,7 @@
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#else #else
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
#endif #endif
// //
@ -96,7 +96,7 @@
// //
#define HEATER_0_PIN PG12 // HEATER1 #define HEATER_0_PIN PG12 // HEATER1
#define HEATER_BED_PIN PG11 // HOT BED #define HEATER_BED_PIN PG11 // HOT BED
//#define HEATER_BED_INVERTING true //#define HEATER_BED_INVERTING true
// //
// Fans // Fans
@ -119,71 +119,9 @@
#define FIL_RUNOUT2_PIN PF13 #define FIL_RUNOUT2_PIN PF13
#endif #endif
//
// TronXY TFT Support
//
#if ENABLED(FSMC_GRAPHICAL_TFT)
#define FSMC_UPSCALE 3
#define LCD_RESET_PIN PF11
#define LCD_BACKLIGHT_PIN PD13
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#if NEED_TOUCH_PINS
#define TOUCH_CS_PIN PB7 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
#define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION -12316
#endif
#ifndef XPT2046_Y_CALIBRATION
#define XPT2046_Y_CALIBRATION 8981
#endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET 340
#endif
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET -20
#endif
#endif
#elif ENABLED(TFT_480x320)
#define TFT_RESET_PIN PF11
#define TFT_BACKLIGHT_PIN PD13
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define XPT2046_X_CALIBRATION -17181
#define XPT2046_Y_CALIBRATION 11434
#define XPT2046_X_OFFSET 501
#define XPT2046_Y_OFFSET -9
#define TOUCH_CS_PIN PB7 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define TFT_DRIVER ILI9488
#define TFT_BUFFER_SIZE 14400
#endif
// SPI Flash // SPI Flash
#define SPI_FLASH_SIZE 0x200000 // 2MB #define SPI_FLASH_SIZE 0x200000 // 2MB
#define HAS_SPI_FLASH 1 #define HAS_SPI_FLASH 1
// SPI 2 // SPI 2
#define W25QXX_CS_PIN PB12 #define W25QXX_CS_PIN PB12
@ -191,28 +129,16 @@
#define W25QXX_MISO_PIN PB14 #define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13 #define W25QXX_SCK_PIN PB13
#if HAS_TFT_LVGL_UI //
#define HAS_SPI_FLASH_FONT 0 // TronXY TFT Support
#define HAS_GCODE_PREVIEW 1 //
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
#define HAS_LANG_SELECT_SCREEN 0
#define HAS_BAK_VIEW_IN_FLASH 0
#define HAS_LOGO_IN_FLASH 0
// Shared FSMC Configs
#if HAS_FSMC_TFT
#define TOUCH_CS_PIN PB7 // SPI1_NSS #define TOUCH_CS_PIN PB7 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK #define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO #define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
//#define TOUCH_INT_PIN PB6
#if ENABLED(TFT_LVGL_UI_SPI)
#define SPI_TFT_CS_PIN TOUCH_CS_PIN
#define SPI_TFT_SCK_PIN TOUCH_SCK_PIN
#define SPI_TFT_MISO_PIN TOUCH_MISO_PIN
#define SPI_TFT_MOSI_PIN TOUCH_MOSI_PIN
#define SPI_TFT_DC_PIN PB6
#define SPI_TFT_RST_PIN PF11
#endif
#define LCD_RESET_PIN PF11 #define LCD_RESET_PIN PF11
#define LCD_BACKLIGHT_PIN PD13 #define LCD_BACKLIGHT_PIN PD13
@ -225,17 +151,56 @@
#define FSMC_DMA_DEV DMA2 #define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5 #define FSMC_DMA_CHANNEL DMA_CH5
#define LCD_PIXEL_WIDTH 480 #define TFT_WIDTH 480
#define LCD_PIXEL_HEIGHT 320 #define TFT_HEIGHT 320
#define LCD_FULL_PIXEL_WIDTH LCD_PIXEL_WIDTH #define TFT_PIXEL_OFFSET_X 48
#define LCD_FULL_PIXEL_HEIGHT LCD_PIXEL_HEIGHT #define TFT_PIXEL_OFFSET_Y 32
#define LCD_PIXEL_OFFSET_X 48
#define LCD_PIXEL_OFFSET_Y 48 #endif
// LVGL Configs
#if HAS_TFT_LVGL_UI
#define HAS_SPI_FLASH_FONT 1
#define HAS_GCODE_PREVIEW 1
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
#define HAS_LANG_SELECT_SCREEN 1
#define HAS_BAK_VIEW_IN_FLASH 0
#define HAS_LOGO_IN_FLASH 0
#define XPT2046_X_CALIBRATION -17181 #define XPT2046_X_CALIBRATION -17181
#define XPT2046_Y_CALIBRATION 11434 #define XPT2046_Y_CALIBRATION 11434
#define XPT2046_X_OFFSET 501 #define XPT2046_X_OFFSET 501
#define XPT2046_Y_OFFSET -9 #define XPT2046_Y_OFFSET -9
// Color UI Configs
#elif ENABLED(TFT_480x320)
#define TFT_DRIVER ILI9488
#define TFT_BUFFER_SIZE 14400
#define XPT2046_X_CALIBRATION -17181
#define XPT2046_Y_CALIBRATION 11434
#define XPT2046_X_OFFSET 501
#define XPT2046_Y_OFFSET -9
// Emulated DOGM
#elif ENABLED(FSMC_GRAPHICAL_TFT)
#define GRAPHICAL_TFT_UPSCALE 3
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION -12316
#endif
#ifndef XPT2046_Y_CALIBRATION
#define XPT2046_Y_CALIBRATION 8981
#endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET 340
#endif
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET -20
#endif
#endif #endif
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available // SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
@ -251,5 +216,5 @@
// //
#define SDIO_SUPPORT #define SDIO_SUPPORT
#define SD_DETECT_PIN -1 // PF0, but it isn't connected #define SD_DETECT_PIN -1 // PF0, but it isn't connected
#define SDIO_CLOCK 4500000 #define SDIO_CLOCK 4500000
#define SDIO_READ_RETRIES 16 #define SDIO_READ_RETRIES 16

20
Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
View file

@ -86,8 +86,8 @@
#define FAN_PIN PA15 // pin 77 (4cm Fan) #define FAN_PIN PA15 // pin 77 (4cm Fan)
#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink #define FAN_SOFT_PWM // Required to avoid issues with heating or STLink
#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range #define FAN_MIN_PWM 35 // Fan will not start in 1-30 range
#define FAN_MAX_PWM 255 #define FAN_MAX_PWM 255
//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor //#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor
// Can drive a PC Buzzer, if connected between PWM and 5V pins // Can drive a PC Buzzer, if connected between PWM and 5V pins
@ -130,11 +130,11 @@
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h #define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
#define DOGLCD_SCK -1 #define DOGLCD_SCK -1
#define FSMC_UPSCALE 2 #define GRAPHICAL_TFT_UPSCALE 2
#define LCD_FULL_PIXEL_WIDTH 320 #define TFT_WIDTH 320
#define LCD_FULL_PIXEL_HEIGHT 240 #define TFT_HEIGHT 240
#define LCD_PIXEL_OFFSET_X 32 #define TFT_PIXEL_OFFSET_X 32
#define LCD_PIXEL_OFFSET_Y 32 #define TFT_PIXEL_OFFSET_Y 32
/** /**
* Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer * Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer
@ -160,12 +160,12 @@
#if ENABLED(SPI_EEPROM) #if ENABLED(SPI_EEPROM)
// SPI1 EEPROM Winbond W25Q64 (8MB/64Mbits) // SPI1 EEPROM Winbond W25Q64 (8MB/64Mbits)
#define SPI_CHAN_EEPROM1 1 #define SPI_CHAN_EEPROM1 1
#define SPI_EEPROM1_CS PC5 // pin 34 #define SPI_EEPROM1_CS PC5 // pin 34
#define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30 #define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30
#define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31 #define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31
#define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32 #define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32
#define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet) #define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet)
#define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE) // Limit to 64KB for now... #define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE) // Limit to 64KB for now...
#elif ENABLED(FLASH_EEPROM_EMULATION) #elif ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
@ -173,5 +173,5 @@
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE (EEPROM_PAGE_SIZE) #define MARLIN_EEPROM_SIZE (EEPROM_PAGE_SIZE)
#else #else
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
#endif #endif

122
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
View file

@ -127,10 +127,10 @@
#define PS_ON_PIN PA3 // PW_OFF #define PS_ON_PIN PA3 // PW_OFF
//#define SUICIDE_PIN PB2 // Enable MKSPWC support ROBIN NANO v1.2 ONLY //#define SUICIDE_PIN PB2 // Enable MKSPWC support ROBIN NANO v1.2 ONLY
//#define SUICIDE_PIN_INVERTING false //#define SUICIDE_PIN_INVERTING false
//#define KILL_PIN PA2 // Enable MKSPWC support ROBIN NANO v1.2 ONLY //#define KILL_PIN PA2 // Enable MKSPWC support ROBIN NANO v1.2 ONLY
//#define KILL_PIN_INVERTING true // Enable MKSPWC support ROBIN NANO v1.2 ONLY //#define KILL_PIN_INVERTING true // Enable MKSPWC support ROBIN NANO v1.2 ONLY
#define SERVO0_PIN PA8 // Enable BLTOUCH support ROBIN NANO v1.2 ONLY #define SERVO0_PIN PA8 // Enable BLTOUCH support ROBIN NANO v1.2 ONLY
@ -138,7 +138,7 @@
#define MT_DET_1_PIN PA4 #define MT_DET_1_PIN PA4
#define MT_DET_2_PIN PE6 #define MT_DET_2_PIN PE6
#define MT_DET_PIN_INVERTING false #define MT_DET_PIN_INVERTING false
#define WIFI_IO0_PIN PC13 #define WIFI_IO0_PIN PC13
@ -150,7 +150,7 @@
#endif #endif
#define SDIO_SUPPORT #define SDIO_SUPPORT
#define SDIO_CLOCK 4500000 // 4.5 MHz #define SDIO_CLOCK 4500000 // 4.5 MHz
#define SD_DETECT_PIN PD12 #define SD_DETECT_PIN PD12
#define ONBOARD_SD_CS_PIN PC11 #define ONBOARD_SD_CS_PIN PC11
@ -165,8 +165,8 @@
* to let the bootloader init the screen. * to let the bootloader init the screen.
*/ */
#if ENABLED(TFT_LVGL_UI_FSMC) // Shared FSMC Configs
#if HAS_FSMC_TFT
#define FSMC_CS_PIN PD7 // NE4 #define FSMC_CS_PIN PD7 // NE4
#define FSMC_RS_PIN PD11 // A0 #define FSMC_RS_PIN PD11 // A0
@ -175,59 +175,10 @@
#define TOUCH_MISO_PIN PB14 // SPI2_MISO #define TOUCH_MISO_PIN PB14 // SPI2_MISO
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
#define LCD_BACKLIGHT_PIN PD13
#define XPT2046_X_CALIBRATION 17880
#define XPT2046_Y_CALIBRATION -12234
#define XPT2046_X_OFFSET -45
#define XPT2046_Y_OFFSET 349
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#elif ENABLED(FSMC_GRAPHICAL_TFT)
#define DOGLCD_MOSI -1 // prevent redefine Conditionals_post.h
#define DOGLCD_SCK -1
#ifndef FSMC_UPSCALE
#define FSMC_UPSCALE 3
#endif
#ifndef LCD_FULL_PIXEL_WIDTH
#define LCD_FULL_PIXEL_WIDTH 480
#endif
#ifndef LCD_PIXEL_OFFSET_X
#define LCD_PIXEL_OFFSET_X 48
#endif
#ifndef LCD_FULL_PIXEL_HEIGHT
#define LCD_FULL_PIXEL_HEIGHT 320
#endif
#ifndef LCD_PIXEL_OFFSET_Y
#define LCD_PIXEL_OFFSET_Y 32
#endif
#define FSMC_CS_PIN PD7 // NE4
#define FSMC_RS_PIN PD11 // A0
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define LCD_RESET_PIN PC6 // FSMC_RST #define LCD_RESET_PIN PC6 // FSMC_RST
#define LCD_BACKLIGHT_PIN PD13 #define LCD_BACKLIGHT_PIN PD13
#if NEED_TOUCH_PINS #define TFT_RESET_PIN PC6 // FSMC_RST
#define TOUCH_CS_PIN PA7 // SPI2_NSS
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
#endif
#elif ENABLED(TFT_480x320)
#define TFT_RESET_PIN PC6
#define TFT_BACKLIGHT_PIN PD13 #define TFT_BACKLIGHT_PIN PD13
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
@ -236,23 +187,66 @@
#define FSMC_DMA_DEV DMA2 #define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5 #define FSMC_DMA_CHANNEL DMA_CH5
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 2
#endif
// LVGL Configs
#if ENABLED(TFT_LVGL_UI_FSMC)
#define XPT2046_X_CALIBRATION 17880 #define XPT2046_X_CALIBRATION 17880
#define XPT2046_Y_CALIBRATION -12234 #define XPT2046_Y_CALIBRATION -12234
#define XPT2046_X_OFFSET -45 #define XPT2046_X_OFFSET -45
#define XPT2046_Y_OFFSET 349 #define XPT2046_Y_OFFSET 349
#define TOUCH_CS_PIN PA7 // SPI2_NSS // Emulated DOGM Configs
#define TOUCH_SCK_PIN PB13 // SPI2_SCK #elif ENABLED(FSMC_GRAPHICAL_TFT)
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
#define TFT_DRIVER ILI9488 #define DOGLCD_MOSI -1 // prevent redefine Conditionals_post.h
#define TFT_BUFFER_SIZE 14400 #define DOGLCD_SCK -1
#ifndef GRAPHICAL_TFT_UPSCALE
#define GRAPHICAL_TFT_UPSCALE 3
#endif
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif
#ifndef TFT_PIXEL_OFFSET_X
#define TFT_PIXEL_OFFSET_X 48
#endif
#ifndef TFT_HEIGHT
#define TFT_HEIGHT 320
#endif
#ifndef TFT_PIXEL_OFFSET_Y
#define TFT_PIXEL_OFFSET_Y 32
#endif
#ifndef XPT2046_X_CALIBRATION
#define XPT2046_X_CALIBRATION 12149
#endif
#ifndef XPT2046_Y_CALIBRATION
#define XPT2046_Y_CALIBRATION -8746
#endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET -35
#endif
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET 256
#endif
#elif ENABLED(TFT_480x320)
#define XPT2046_X_CALIBRATION 17880
#define XPT2046_Y_CALIBRATION -12234
#define XPT2046_X_OFFSET -45
#define XPT2046_Y_OFFSET 349
#define TFT_DRIVER ILI9488
#define TFT_BUFFER_SIZE 14400
#define ILI9488_ORIENTATION ILI9488_MADCTL_MX | ILI9488_MADCTL_MV #define ILI9488_ORIENTATION ILI9488_MADCTL_MX | ILI9488_MADCTL_MV
#endif #endif
#define HAS_SPI_FLASH 1 #define HAS_SPI_FLASH 1
#define SPI_FLASH_SIZE 0x1000000 // 16MB #define SPI_FLASH_SIZE 0x1000000 // 16MB
#if HAS_SPI_FLASH #if HAS_SPI_FLASH
#define W25QXX_CS_PIN PB12 #define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15 #define W25QXX_MOSI_PIN PB15

187
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
View file

@ -29,6 +29,8 @@
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2 #elif HOTENDS > 2 || E_STEPPERS > 2
#error "MKS Robin nano supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "MKS Robin nano supports up to 2 hotends / E-steppers. Comment out this line to continue."
#elif HAS_FSMC_TFT
#error "MKS Robin nano v2 doesn't support FSMC-based TFT displays."
#endif #endif
#define BOARD_INFO_NAME "MKS Robin nano V2.0" #define BOARD_INFO_NAME "MKS Robin nano V2.0"
@ -47,13 +49,13 @@
#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM) #if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM)
#define I2C_EEPROM // EEPROM on I2C-0 #define I2C_EEPROM // EEPROM on I2C-0
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#endif #endif
// //
// Note: MKS Robin board is using SPI2 interface. // Note: MKS Robin board is using SPI2 interface.
// //
//#define SPI_MODULE 2 //#define SPI_MODULE 2
#define ENABLE_SPI2 #define ENABLE_SPI2
// //
@ -162,7 +164,7 @@
#define E1_SERIAL_RX_PIN PD8 #define E1_SERIAL_RX_PIN PD8
// Reduce baud rate to improve software serial reliability // Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200 #define TMC_BAUD_RATE 19200
#endif // TMC2208 || TMC2209 #endif // TMC2208 || TMC2209
// //
@ -194,10 +196,10 @@
#define PS_ON_PIN PA3 // PW_OFF #define PS_ON_PIN PA3 // PW_OFF
//#define SUICIDE_PIN PB2 // Enable MKSPWC support ROBIN NANO v1.2 ONLY //#define SUICIDE_PIN PB2 // Enable MKSPWC support ROBIN NANO v1.2 ONLY
//#define SUICIDE_PIN_INVERTING false //#define SUICIDE_PIN_INVERTING false
//#define KILL_PIN PA2 // Enable MKSPWC support ROBIN NANO v1.2 ONLY //#define KILL_PIN PA2 // Enable MKSPWC support ROBIN NANO v1.2 ONLY
//#define KILL_PIN_INVERTING true // Enable MKSPWC support ROBIN NANO v1.2 ONLY //#define KILL_PIN_INVERTING true // Enable MKSPWC support ROBIN NANO v1.2 ONLY
#define SERVO0_PIN PA8 // Enable BLTOUCH support ROBIN NANO v1.2 ONLY #define SERVO0_PIN PA8 // Enable BLTOUCH support ROBIN NANO v1.2 ONLY
@ -205,7 +207,7 @@
#define MT_DET_1_PIN PA4 #define MT_DET_1_PIN PA4
#define MT_DET_2_PIN PE6 #define MT_DET_2_PIN PE6
#define MT_DET_PIN_INVERTING false #define MT_DET_PIN_INVERTING false
#ifndef FIL_RUNOUT_PIN #ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN MT_DET_1_PIN #define FIL_RUNOUT_PIN MT_DET_1_PIN
@ -224,7 +226,7 @@
#endif #endif
#define SDIO_SUPPORT #define SDIO_SUPPORT
#define SDIO_CLOCK 4500000 // 4.5 MHz #define SDIO_CLOCK 4500000 // 4.5 MHz
#define SD_DETECT_PIN PD12 #define SD_DETECT_PIN PD12
#define ONBOARD_SD_CS_PIN PC11 #define ONBOARD_SD_CS_PIN PC11
@ -241,14 +243,9 @@
* to let the bootloader init the screen. * to let the bootloader init the screen.
*/ */
#if ENABLED(TFT_LVGL_UI_SPI) #if HAS_SPI_TFT
#define SPI_TFT_CS_PIN PD11 // Shared SPI TFT
#define SPI_TFT_SCK_PIN PA5
#define SPI_TFT_MISO_PIN PA6
#define SPI_TFT_MOSI_PIN PA7
#define SPI_TFT_DC_PIN PD10
#define SPI_TFT_RST_PIN PC6
#define LCD_BACKLIGHT_PIN PD13 #define LCD_BACKLIGHT_PIN PD13
@ -261,87 +258,88 @@
#define BTN_EN2 PE11 #define BTN_EN2 PE11
#define BTN_ENC PE13 #define BTN_ENC PE13
#define TFT_CS_PIN PD11 #define TFT_CS_PIN PD11
#define TFT_SCK_PIN PA5 #define TFT_SCK_PIN PA5
#define TFT_MISO_PIN PA6 #define TFT_MISO_PIN PA6
#define TFT_MOSI_PIN PA7 #define TFT_MOSI_PIN PA7
#define TFT_DC_PIN PD10 #define TFT_DC_PIN PD10
#define TFT_RST_PIN PC6 #define TFT_RST_PIN PC6
#define TFT_A0_PIN TFT_DC_PIN #define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN PC6 #define TFT_RESET_PIN PC6
#define TFT_BACKLIGHT_PIN PD13 #define TFT_BACKLIGHT_PIN PD13
#define XPT2046_X_CALIBRATION -17253
#define XPT2046_Y_CALIBRATION 11579
#define XPT2046_X_OFFSET 514
#define XPT2046_Y_OFFSET -24
#define TOUCH_BUTTONS_HW_SPI #define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1 #define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#ifndef LCD_FULL_PIXEL_WIDTH #ifndef TFT_WIDTH
#define LCD_FULL_PIXEL_WIDTH 480 #define TFT_WIDTH 480
#endif #endif
#ifndef LCD_FULL_PIXEL_HEIGHT #ifndef TFT_HEIGHT
#define LCD_FULL_PIXEL_HEIGHT 320 #define TFT_HEIGHT 320
#endif #endif
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
#endif #endif
#if HAS_SPI_LCD #if ENABLED(TFT_LVGL_UI_SPI)
#if ENABLED(SPI_GRAPHICAL_TFT) // Emulated DOGM SPI // LVGL
#define SPI_TFT_CS_PIN PD11
#define SPI_TFT_SCK_PIN PA5
#define SPI_TFT_MISO_PIN PA6
#define SPI_TFT_MOSI_PIN PA7
#define SPI_TFT_DC_PIN PD10
#define SPI_TFT_RST_PIN PC6
#define LCD_BACKLIGHT_PIN PD13 #define XPT2046_X_CALIBRATION -17253
#define XPT2046_Y_CALIBRATION 11579
#define XPT2046_X_OFFSET 514
#define XPT2046_Y_OFFSET -24
#define LCD_READ_ID 0xD3 #elif ENABLED(SPI_GRAPHICAL_TFT)
#define LCD_USE_DMA_SPI
#define TOUCH_BUTTONS_HW_SPI // Emulated DOGM SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
//#define TOUCH_SCREEN #ifndef XPT2046_X_CALIBRATION
#if EITHER(TOUCH_SCREEN, NEED_TOUCH_PINS) #define XPT2046_X_CALIBRATION -11386
#define TOUCH_CS_PIN PE14 // SPI1_NSS #endif
#define TOUCH_SCK_PIN PA5 // SPI1_SCK #ifndef XPT2046_Y_CALIBRATION
#define TOUCH_MISO_PIN PA6 // SPI1_MISO #define XPT2046_Y_CALIBRATION 8684
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI #endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET 339
#endif
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET -18
#endif
#ifndef XPT2046_X_CALIBRATION #ifndef GRAPHICAL_TFT_UPSCALE
#define XPT2046_X_CALIBRATION -5481 #define GRAPHICAL_TFT_UPSCALE 3
#endif #endif
#ifndef XPT2046_Y_CALIBRATION #ifndef TFT_PIXEL_OFFSET_Y
#define XPT2046_Y_CALIBRATION 4000 #define TFT_PIXEL_OFFSET_Y 32
#endif #endif
#ifndef XPT2046_X_OFFSET
#define XPT2046_X_OFFSET 343
#endif
#ifndef XPT2046_Y_OFFSET
#define XPT2046_Y_OFFSET 0
#endif
#endif
#ifndef FSMC_UPSCALE #define BTN_ENC PE13
#define FSMC_UPSCALE 3 #define BTN_EN1 PE8
#endif #define BTN_EN2 PE11
#ifndef LCD_PIXEL_OFFSET_Y
#define LCD_PIXEL_OFFSET_Y 32
#endif
#define BTN_ENC PE13 #define LCD_PINS_ENABLE PD13
#define BTN_EN1 PE8 #define LCD_PINS_RS PC6
#define BTN_EN2 PE11
#define LCD_PINS_ENABLE PD13 #elif ENABLED(TFT_480x320_SPI)
#define LCD_PINS_RS PC6 #define XPT2046_X_CALIBRATION -17253
#define XPT2046_Y_CALIBRATION 11579
#define XPT2046_X_OFFSET 514
#define XPT2046_Y_OFFSET -24
#elif ENABLED(MKS_MINI_12864) #define TFT_DRIVER ST7796
#define TFT_BUFFER_SIZE 14400
#endif
#if HAS_SPI_LCD && !HAS_SPI_TFT
// NON TFT Displays
#if ENABLED(MKS_MINI_12864)
// MKS MINI12864 and MKS LCD12864B // MKS MINI12864 and MKS LCD12864B
// If using MKS LCD12864A (Need to remove RPK2 resistor) // If using MKS LCD12864A (Need to remove RPK2 resistor)
@ -357,37 +355,6 @@
#define MKS_LCD12864B #define MKS_LCD12864B
#undef SHOW_BOOTSCREEN #undef SHOW_BOOTSCREEN
#elif ENABLED(TFT_480x320_SPI)
#define TFT_CS_PIN PD11
#define TFT_SCK_PIN PA5
#define TFT_MISO_PIN PA6
#define TFT_MOSI_PIN PA7
#define TFT_DC_PIN PD10
#define TFT_RST_PIN PC6
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN PC6
#define TFT_BACKLIGHT_PIN PD13
#define XPT2046_X_CALIBRATION -17253
#define XPT2046_Y_CALIBRATION 11579
#define XPT2046_X_OFFSET 514
#define XPT2046_Y_OFFSET -24
#define TOUCH_CS_PIN PE14 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define TFT_DRIVER ST7796
#define TFT_BUFFER_SIZE 14400
#define LCD_READ_ID 0xD3
#define LCD_USE_DMA_SPI
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#else // !MKS_MINI_12864 #else // !MKS_MINI_12864
#define LCD_PINS_D4 PE14 #define LCD_PINS_D4 PE14
@ -409,10 +376,10 @@
#endif // !MKS_MINI_12864 #endif // !MKS_MINI_12864
#endif // HAS_SPI_LCD #endif // HAS_SPI_LCD && !HAS_SPI_TFT
#define HAS_SPI_FLASH 1 #define HAS_SPI_FLASH 1
#define SPI_FLASH_SIZE 0x1000000 // 16MB #define SPI_FLASH_SIZE 0x1000000 // 16MB
#if HAS_SPI_FLASH #if HAS_SPI_FLASH
#define W25QXX_CS_PIN PB12 #define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15 #define W25QXX_MOSI_PIN PB15

41
buildroot/share/scripts/pinsformat.js
View file

@ -38,10 +38,12 @@ for (let m of mpatt) mexpr.push(new RegExp('^' + m + '$'));
const argv = process.argv.slice(2), argc = argv.length; const argv = process.argv.slice(2), argc = argv.length;
var src_file = 0, src_name = 'STDIN', dst_file; var src_file = 0, src_name = 'STDIN', dst_file, do_log = false;
if (argc > 0) { if (argc > 0) {
src_file = src_name = argv[0]; let ind = 0;
dst_file = argv[argc > 1 ? 1 : 0]; if (argv[0] == '-v') { do_log = true; ind++; }
dst_file = src_file = src_name = argv[ind++];
if (ind < argc) dst_file = argv[ind];
} }
// Read from file or STDIN until it terminates // Read from file or STDIN until it terminates
@ -81,7 +83,7 @@ function process_text(txt) {
aliasPatt = new RegExp('^(\\s*(//)?#define)\\s+([A-Z_][A-Z0-9_]+)\\s+([A-Z_][A-Z0-9_()]+)\\s*(//.*)?$'), aliasPatt = new RegExp('^(\\s*(//)?#define)\\s+([A-Z_][A-Z0-9_]+)\\s+([A-Z_][A-Z0-9_()]+)\\s*(//.*)?$'),
switchPatt = new RegExp('^(\\s*(//)?#define)\\s+([A-Z_][A-Z0-9_]+)\\s*(//.*)?$'), switchPatt = new RegExp('^(\\s*(//)?#define)\\s+([A-Z_][A-Z0-9_]+)\\s*(//.*)?$'),
undefPatt = new RegExp('^(\\s*(//)?#undef)\\s+([A-Z_][A-Z0-9_]+)\\s*(//.*)?$'), undefPatt = new RegExp('^(\\s*(//)?#undef)\\s+([A-Z_][A-Z0-9_]+)\\s*(//.*)?$'),
defPatt = new RegExp('^(\\s*(//)?#define)\\s+([A-Z_][A-Z0-9_]+)\\s+(\\w+)\\s*(//.*)?$'), defPatt = new RegExp('^(\\s*(//)?#define)\\s+([A-Z_][A-Z0-9_]+)\\s+([-_\\w]+)\\s*(//.*)?$'),
condPatt = new RegExp('^(\\s*(//)?#(if|ifn?def|else|elif)(\\s+\\S+)*)\\s+(//.*)$'), condPatt = new RegExp('^(\\s*(//)?#(if|ifn?def|else|elif)(\\s+\\S+)*)\\s+(//.*)$'),
commPatt = new RegExp('^\\s{20,}(//.*)?$'); commPatt = new RegExp('^\\s{20,}(//.*)?$');
const col_value_lj = col_comment - patt.pad - 2; const col_value_lj = col_comment - patt.pad - 2;
@ -98,6 +100,7 @@ function process_text(txt) {
// //
// #define MY_PIN [pin] // #define MY_PIN [pin]
// //
if (do_log) console.log("pin:", line);
const pinnum = r[4].charAt(0) == 'P' ? r[4] : r[4].lpad(patt.pad); const pinnum = r[4].charAt(0) == 'P' ? r[4] : r[4].lpad(patt.pad);
line = r[1] + ' ' + r[3]; line = r[1] + ' ' + r[3];
line = line.rpad(col_value_lj) + pinnum; line = line.rpad(col_value_lj) + pinnum;
@ -107,31 +110,57 @@ function process_text(txt) {
// //
// #define MY_PIN -1 // #define MY_PIN -1
// //
if (do_log) console.log("pin -1:", line);
line = r[1] + ' ' + r[3]; line = r[1] + ' ' + r[3];
line = line.rpad(col_value_lj) + '-1'; line = line.rpad(col_value_lj) + '-1';
if (r[5]) line = line.rpad(col_comment) + r[5]; if (r[5]) line = line.rpad(col_comment) + r[5];
} }
else if ((r = skipPatt.exec(line)) !== null) { else if ((r = skipPatt.exec(line)) !== null) {
//
// #define SKIP_ME
//
if (do_log) console.log("skip:", line);
} }
else if ((r = aliasPatt.exec(line)) !== null) { else if ((r = aliasPatt.exec(line)) !== null) {
//
// #define ALIAS OTHER
//
if (do_log) console.log("alias:", line);
line = r[1] + ' ' + r[3]; line = r[1] + ' ' + r[3];
line += r[4].lpad(col_value_rj + 1 - line.length); line += r[4].lpad(col_value_rj + 1 - line.length);
if (r[5]) line = line.rpad(col_comment) + r[5]; if (r[5]) line = line.rpad(col_comment) + r[5];
} }
else if ((r = switchPatt.exec(line)) !== null) { else if ((r = switchPatt.exec(line)) !== null) {
//
// #define SWITCH
//
if (do_log) console.log("switch:", line);
line = r[1] + ' ' + r[3]; line = r[1] + ' ' + r[3];
if (r[4]) line = line.rpad(col_comment) + r[4]; if (r[4]) line = line.rpad(col_comment) + r[4];
check_comment_next = true; check_comment_next = true;
} }
else if ((r = defPatt.exec(line)) !== null) { else if ((r = defPatt.exec(line)) !== null) {
line = r[1] + ' ' + r[3] + ' ' + r[4]; //
if (r[5]) line = line.rpad(col_comment) + r[5]; // #define ...
//
if (do_log) console.log("def:", line);
line = r[1] + ' ' + r[3] + ' ';
line += r[4].lpad(col_value_rj + 1 - line.length);
if (r[5]) line = line.rpad(col_comment - 1) + ' ' + r[5];
} }
else if ((r = undefPatt.exec(line)) !== null) { else if ((r = undefPatt.exec(line)) !== null) {
//
// #undef ...
//
if (do_log) console.log("undef:", line);
line = r[1] + ' ' + r[3]; line = r[1] + ' ' + r[3];
if (r[4]) line = line.rpad(col_comment) + r[4]; if (r[4]) line = line.rpad(col_comment) + r[4];
} }
else if ((r = condPatt.exec(line)) !== null) { else if ((r = condPatt.exec(line)) !== null) {
//
// #if ...
//
if (do_log) console.log("cond:", line);
line = r[1].rpad(col_comment) + r[5]; line = r[1].rpad(col_comment) + r[5];
check_comment_next = true; check_comment_next = true;
} }