Merge pull request #5252 from thinkyhead/rc_endstop_interrupt_followup
Endstop interrupts followup
This commit is contained in:
Scott Lahteine
GitHub
commit
de3eea920d
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 0
|
#define TEMP_SENSOR_BED 0
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -445,8 +454,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -31,79 +31,20 @@
|
||||||
* - http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
|
* - http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include "Marlin.h"
|
|
||||||
|
|
||||||
#include "ultralcd.h"
|
|
||||||
#include "planner.h"
|
|
||||||
#include "stepper.h"
|
|
||||||
#include "endstops.h"
|
|
||||||
#include "temperature.h"
|
|
||||||
#include "cardreader.h"
|
|
||||||
#include "configuration_store.h"
|
|
||||||
#include "language.h"
|
|
||||||
#include "pins_arduino.h"
|
|
||||||
#include "math.h"
|
|
||||||
#include "nozzle.h"
|
|
||||||
#include "duration_t.h"
|
|
||||||
#include "types.h"
|
|
||||||
|
|
||||||
#if HAS_ABL
|
|
||||||
#include "vector_3.h"
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR)
|
|
||||||
#include "qr_solve.h"
|
|
||||||
#endif
|
|
||||||
#elif ENABLED(MESH_BED_LEVELING)
|
|
||||||
#include "mesh_bed_leveling.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(BEZIER_CURVE_SUPPORT)
|
|
||||||
#include "planner_bezier.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER)
|
|
||||||
#include "buzzer.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(USE_WATCHDOG)
|
|
||||||
#include "watchdog.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(BLINKM)
|
|
||||||
#include "blinkm.h"
|
|
||||||
#include "Wire.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if HAS_SERVOS
|
|
||||||
#include "servo.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if HAS_DIGIPOTSS
|
|
||||||
#include <SPI.h>
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(DAC_STEPPER_CURRENT)
|
|
||||||
#include "stepper_dac.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(EXPERIMENTAL_I2CBUS)
|
|
||||||
#include "twibus.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
|
|
||||||
#include "endstop_interrupts.h"
|
|
||||||
#endif
|
|
||||||
/**
|
/**
|
||||||
* Look here for descriptions of G-codes:
|
* -----------------
|
||||||
|
* G-Codes in Marlin
|
||||||
|
* -----------------
|
||||||
|
*
|
||||||
|
* Helpful G-code references:
|
||||||
* - http://linuxcnc.org/handbook/gcode/g-code.html
|
* - http://linuxcnc.org/handbook/gcode/g-code.html
|
||||||
* - http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes
|
* - http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes
|
||||||
*
|
*
|
||||||
* Help us document these G-codes online:
|
* Help to document Marlin's G-codes online:
|
||||||
* - https://github.com/MarlinFirmware/Marlin/wiki/G-Code-in-Marlin
|
|
||||||
* - http://reprap.org/wiki/G-code
|
* - http://reprap.org/wiki/G-code
|
||||||
|
* - https://github.com/MarlinFirmware/MarlinDocumentation
|
||||||
*
|
*
|
||||||
* -----------------
|
* -----------------
|
||||||
* Implemented Codes
|
|
||||||
* -----------------
|
|
||||||
*
|
*
|
||||||
* "G" Codes
|
* "G" Codes
|
||||||
*
|
*
|
||||||
|
|
@ -276,6 +217,68 @@
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
#include "Marlin.h"
|
||||||
|
|
||||||
|
#include "ultralcd.h"
|
||||||
|
#include "planner.h"
|
||||||
|
#include "stepper.h"
|
||||||
|
#include "endstops.h"
|
||||||
|
#include "temperature.h"
|
||||||
|
#include "cardreader.h"
|
||||||
|
#include "configuration_store.h"
|
||||||
|
#include "language.h"
|
||||||
|
#include "pins_arduino.h"
|
||||||
|
#include "math.h"
|
||||||
|
#include "nozzle.h"
|
||||||
|
#include "duration_t.h"
|
||||||
|
#include "types.h"
|
||||||
|
|
||||||
|
#if HAS_ABL
|
||||||
|
#include "vector_3.h"
|
||||||
|
#if ENABLED(AUTO_BED_LEVELING_LINEAR)
|
||||||
|
#include "qr_solve.h"
|
||||||
|
#endif
|
||||||
|
#elif ENABLED(MESH_BED_LEVELING)
|
||||||
|
#include "mesh_bed_leveling.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(BEZIER_CURVE_SUPPORT)
|
||||||
|
#include "planner_bezier.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER)
|
||||||
|
#include "buzzer.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(USE_WATCHDOG)
|
||||||
|
#include "watchdog.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(BLINKM)
|
||||||
|
#include "blinkm.h"
|
||||||
|
#include "Wire.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if HAS_SERVOS
|
||||||
|
#include "servo.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if HAS_DIGIPOTSS
|
||||||
|
#include <SPI.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(DAC_STEPPER_CURRENT)
|
||||||
|
#include "stepper_dac.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(EXPERIMENTAL_I2CBUS)
|
||||||
|
#include "twibus.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
|
||||||
|
#include "endstop_interrupts.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
#if ENABLED(M100_FREE_MEMORY_WATCHER)
|
#if ENABLED(M100_FREE_MEMORY_WATCHER)
|
||||||
void gcode_M100();
|
void gcode_M100();
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -10020,7 +10023,7 @@ void setup() {
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
|
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
|
||||||
setup_enstop_interrupts();
|
setup_endstop_interrupts();
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -21,13 +21,18 @@
|
||||||
*/
|
*/
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Endstop interrupts
|
* Endstop Interrupts
|
||||||
* Without endstop interrups the stepper-ISR must always test all endstops when interested in their states (endstops.update()).
|
|
||||||
* Most time the test will result in finding out nothing has changed.
|
|
||||||
* With endstop interrupts endstops.update() is called only when we know that at least one endstop has changed its state.
|
|
||||||
*
|
*
|
||||||
* This can work only if all __used__ endstop pins can provide ether an 'external interrupt' or a 'pin change interrupt'.
|
* Without endstop interrupts the endstop pins must be polled continually in
|
||||||
* You can find out about pins issuing interrupts by running 'pin_interrupt_test.ino' (Marlin\buildroot\share\pin_interrupt_test\pin_interrupt_test.ino)
|
* the stepper-ISR via endstops.update(), most of the time finding no change.
|
||||||
|
* With this feature endstops.update() is called only when we know that at
|
||||||
|
* least one endstop has changed state, saving valuable CPU cycles.
|
||||||
|
*
|
||||||
|
* This feature only works when all used endstop pins can generate either an
|
||||||
|
* 'external interrupt' or a 'pin change interrupt'.
|
||||||
|
*
|
||||||
|
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
|
||||||
|
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef _ENDSTOP_INTERRUPTS_H_
|
#ifndef _ENDSTOP_INTERRUPTS_H_
|
||||||
|
|
@ -37,8 +42,8 @@
|
||||||
* Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
|
* Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
|
||||||
*
|
*
|
||||||
* These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
|
* These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
|
||||||
* So we extend them here because this are the normal pins for Y_MIN and Y_MAX on RAMPS.
|
* So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
|
||||||
* There are more PCI enabled processor pins on Port J, but they are not connected to Arduino MEGA.
|
* There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
|
||||||
*/
|
*/
|
||||||
#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
|
#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
|
||||||
#undef digitalPinToPCICR
|
#undef digitalPinToPCICR
|
||||||
|
|
@ -70,7 +75,7 @@
|
||||||
volatile uint8_t e_hit = 0; // Different from 0 when the endstops shall be tested in detail.
|
volatile uint8_t e_hit = 0; // Different from 0 when the endstops shall be tested in detail.
|
||||||
// Must be reset to 0 by the test function when the tests are finished.
|
// Must be reset to 0 by the test function when the tests are finished.
|
||||||
|
|
||||||
// Install Pin change interrupt for a pin, can be called multiple times
|
// Install Pin change interrupt for a pin. Can be called multiple times.
|
||||||
void pciSetup(byte pin) {
|
void pciSetup(byte pin) {
|
||||||
*digitalPinToPCMSK(pin) |= bit (digitalPinToPCMSKbit(pin)); // enable pin
|
*digitalPinToPCMSK(pin) |= bit (digitalPinToPCMSKbit(pin)); // enable pin
|
||||||
PCIFR |= bit (digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
|
PCIFR |= bit (digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
|
||||||
|
|
@ -84,42 +89,33 @@
|
||||||
|
|
||||||
// Use one Routine to handle each group
|
// Use one Routine to handle each group
|
||||||
// One ISR for all EXT-Interrupts
|
// One ISR for all EXT-Interrupts
|
||||||
void endstop_ISR(void) {
|
void endstop_ISR(void) { endstop_ISR_worker(); }
|
||||||
endstop_ISR_worker();
|
|
||||||
}
|
|
||||||
|
|
||||||
|
// Handlers for pin change interrupts
|
||||||
#ifdef PCINT0_vect
|
#ifdef PCINT0_vect
|
||||||
ISR(PCINT0_vect) { // handle pin change interrupt
|
ISR(PCINT0_vect) { endstop_ISR_worker(); }
|
||||||
endstop_ISR_worker();
|
|
||||||
}
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef PCINT1_vect
|
#ifdef PCINT1_vect
|
||||||
ISR(PCINT1_vect) { // handle pin change interrupt
|
ISR(PCINT1_vect) { endstop_ISR_worker(); }
|
||||||
endstop_ISR_worker();
|
|
||||||
}
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef PCINT2_vect
|
#ifdef PCINT2_vect
|
||||||
ISR(PCINT2_vect) { // handle pin change interrupt
|
ISR(PCINT2_vect) { endstop_ISR_worker(); }
|
||||||
endstop_ISR_worker();
|
|
||||||
}
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef PCINT3_vect
|
#ifdef PCINT3_vect
|
||||||
ISR(PCINT3_vect) { // handle pin change interrupt
|
ISR(PCINT3_vect) { endstop_ISR_worker(); }
|
||||||
endstop_ISR_worker();
|
|
||||||
}
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
void setup_enstop_interrupts( void ) {
|
void setup_endstop_interrupts( void ) {
|
||||||
|
|
||||||
#if HAS_X_MAX
|
#if HAS_X_MAX
|
||||||
#if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
|
#if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
|
||||||
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
|
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
|
||||||
#else
|
#else
|
||||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||||
static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR"); // if pin has no pin change interrupt - error
|
static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "X_MAX_PIN is not interrupt-capable"); // if pin has no pin change interrupt - error
|
||||||
pciSetup(X_MAX_PIN); // assign it
|
pciSetup(X_MAX_PIN); // assign it
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -129,7 +125,7 @@
|
||||||
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
|
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
|
||||||
#else
|
#else
|
||||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||||
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable");
|
||||||
pciSetup(X_MIN_PIN);
|
pciSetup(X_MIN_PIN);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -139,7 +135,7 @@
|
||||||
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
|
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
|
||||||
#else
|
#else
|
||||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||||
static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "Y_MAX_PIN is not interrupt-capable");
|
||||||
pciSetup(Y_MAX_PIN);
|
pciSetup(Y_MAX_PIN);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -149,7 +145,7 @@
|
||||||
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
|
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
|
||||||
#else
|
#else
|
||||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||||
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "Y_MIN_PIN is not interrupt-capable");
|
||||||
pciSetup(Y_MIN_PIN);
|
pciSetup(Y_MIN_PIN);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -159,7 +155,7 @@
|
||||||
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
|
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
|
||||||
#else
|
#else
|
||||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||||
static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "Z_MAX_PIN is not interrupt-capable");
|
||||||
pciSetup(Z_MAX_PIN);
|
pciSetup(Z_MAX_PIN);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -169,7 +165,7 @@
|
||||||
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
|
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
|
||||||
#else
|
#else
|
||||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||||
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "Z_MIN_PIN is not interrupt-capable");
|
||||||
pciSetup(Z_MIN_PIN);
|
pciSetup(Z_MIN_PIN);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -179,7 +175,7 @@
|
||||||
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
|
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
|
||||||
#else
|
#else
|
||||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||||
static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "Z2_MAX_PIN is not interrupt-capable");
|
||||||
pciSetup(Z2_MAX_PIN);
|
pciSetup(Z2_MAX_PIN);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -189,7 +185,7 @@
|
||||||
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
|
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
|
||||||
#else
|
#else
|
||||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||||
static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "Z2_MIN_PIN is not interrupt-capable");
|
||||||
pciSetup(Z2_MIN_PIN);
|
pciSetup(Z2_MIN_PIN);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -199,13 +195,12 @@
|
||||||
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
|
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
|
||||||
#else
|
#else
|
||||||
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
|
||||||
static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "ENDSTOP_INTERRUPT_ERROR");
|
static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "Z_MIN_PROBE_PIN is not interrupt-capable");
|
||||||
pciSetup(Z_MIN_PROBE_PIN);
|
pciSetup(Z_MIN_PROBE_PIN);
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// When we arive here without error each pin has ether a EXT-interrupt or a PCI.
|
// If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
#endif //_ENDSTOP_INTERRUPTS_H_
|
#endif //_ENDSTOP_INTERRUPTS_H_
|
||||||
|
|
|
||||||
|
|
@ -201,55 +201,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 -1
|
#define TEMP_SENSOR_0 -1
|
||||||
#define TEMP_SENSOR_1 -1
|
#define TEMP_SENSOR_1 -1
|
||||||
#define TEMP_SENSOR_2 1
|
#define TEMP_SENSOR_2 1
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 1
|
#define TEMP_SENSOR_BED 1
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -445,8 +454,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 1
|
#define TEMP_SENSOR_BED 1
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -427,8 +436,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 1
|
#define TEMP_SENSOR_1 1
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 1
|
#define TEMP_SENSOR_BED 1
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -427,8 +436,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -203,55 +203,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 0
|
#define TEMP_SENSOR_BED 0
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -437,8 +446,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 70
|
#define TEMP_SENSOR_0 70
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 0
|
#define TEMP_SENSOR_BED 0
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -439,8 +448,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -207,55 +207,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 5
|
#define TEMP_SENSOR_0 5
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 5
|
#define TEMP_SENSOR_BED 5
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -462,8 +471,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 5
|
#define TEMP_SENSOR_0 5
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 0
|
#define TEMP_SENSOR_BED 0
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -445,8 +454,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 5
|
#define TEMP_SENSOR_0 5
|
||||||
#define TEMP_SENSOR_1 5
|
#define TEMP_SENSOR_1 5
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 0
|
#define TEMP_SENSOR_BED 0
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -445,8 +454,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 1
|
#define TEMP_SENSOR_BED 1
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -445,8 +454,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -203,55 +203,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 1 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5
|
#define TEMP_SENSOR_0 1 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 1
|
#define TEMP_SENSOR_BED 1
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
//#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
//#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -442,8 +451,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -232,55 +232,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 1
|
#define TEMP_SENSOR_BED 1
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -460,8 +469,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 7
|
#define TEMP_SENSOR_0 7
|
||||||
#define TEMP_SENSOR_1 7
|
#define TEMP_SENSOR_1 7
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 7
|
#define TEMP_SENSOR_BED 7
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -466,8 +475,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -203,55 +203,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 0
|
#define TEMP_SENSOR_BED 0
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -437,8 +446,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 0
|
#define TEMP_SENSOR_BED 0
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -445,8 +454,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 5
|
#define TEMP_SENSOR_0 5
|
||||||
#define TEMP_SENSOR_1 5
|
#define TEMP_SENSOR_1 5
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 1
|
#define TEMP_SENSOR_BED 1
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -489,8 +498,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 -1
|
#define TEMP_SENSOR_0 -1
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 0
|
#define TEMP_SENSOR_BED 0
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -489,8 +498,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 7
|
#define TEMP_SENSOR_0 7
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 11
|
#define TEMP_SENSOR_BED 11
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5
|
||||||
|
|
||||||
|
|
@ -489,8 +498,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -206,55 +206,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 5
|
#define TEMP_SENSOR_0 5
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 5
|
#define TEMP_SENSOR_BED 5
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -478,8 +487,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -193,55 +193,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 5
|
#define TEMP_SENSOR_0 5
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 5
|
#define TEMP_SENSOR_BED 5
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -487,8 +496,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 1
|
#define TEMP_SENSOR_0 1
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 12
|
#define TEMP_SENSOR_BED 12
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -448,8 +457,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -200,55 +200,64 @@
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//============================= Thermal Settings ============================
|
//============================= Thermal Settings ============================
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
//
|
|
||||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
/**
|
||||||
//
|
* --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||||
//// Temperature sensor settings:
|
*
|
||||||
// -3 is thermocouple with MAX31855 (only for sensor 0)
|
* Temperature sensors available:
|
||||||
// -2 is thermocouple with MAX6675 (only for sensor 0)
|
*
|
||||||
// -1 is thermocouple with AD595
|
* -3 : thermocouple with MAX31855 (only for sensor 0)
|
||||||
// 0 is not used
|
* -2 : thermocouple with MAX6675 (only for sensor 0)
|
||||||
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
* -1 : thermocouple with AD595
|
||||||
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
* 0 : not used
|
||||||
// 3 is Mendel-parts thermistor (4.7k pullup)
|
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
|
||||||
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
|
||||||
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
* 3 : Mendel-parts thermistor (4.7k pullup)
|
||||||
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
|
||||||
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
* 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
|
||||||
// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
* 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
|
||||||
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
* 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
|
||||||
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
* 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
|
||||||
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
|
* 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
|
||||||
// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
|
* 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
|
||||||
// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
* 10 : 100k RS thermistor 198-961 (4.7k pullup)
|
||||||
// 13 is 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
* 11 : 100k beta 3950 1% thermistor (4.7k pullup)
|
||||||
// 20 is the PT100 circuit found in the Ultimainboard V2.x
|
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
|
||||||
// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
|
||||||
// 66 is 4.7M High Temperature thermistor from Dyze Design
|
* 20 : the PT100 circuit found in the Ultimainboard V2.x
|
||||||
// 70 is the 100K thermistor found in the bq Hephestos 2
|
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
|
||||||
//
|
* 66 : 4.7M High Temperature thermistor from Dyze Design
|
||||||
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
|
* 70 : the 100K thermistor found in the bq Hephestos 2
|
||||||
// (but gives greater accuracy and more stable PID)
|
*
|
||||||
// 51 is 100k thermistor - EPCOS (1k pullup)
|
* 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
|
||||||
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
* (but gives greater accuracy and more stable PID)
|
||||||
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
* 51 : 100k thermistor - EPCOS (1k pullup)
|
||||||
//
|
* 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
|
||||||
// 1047 is Pt1000 with 4k7 pullup
|
* 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
|
||||||
// 1010 is Pt1000 with 1k pullup (non standard)
|
*
|
||||||
// 147 is Pt100 with 4k7 pullup
|
* 1047 : Pt1000 with 4k7 pullup
|
||||||
// 110 is Pt100 with 1k pullup (non standard)
|
* 1010 : Pt1000 with 1k pullup (non standard)
|
||||||
// 998 and 999 are Dummy Tables. They will ALWAYS read 25°C or the temperature defined below.
|
* 147 : Pt100 with 4k7 pullup
|
||||||
// Use it for Testing or Development purposes. NEVER for production machine.
|
* 110 : Pt100 with 1k pullup (non standard)
|
||||||
//#define DUMMY_THERMISTOR_998_VALUE 25
|
*
|
||||||
//#define DUMMY_THERMISTOR_999_VALUE 100
|
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||||
// :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||||
|
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||||
|
*
|
||||||
|
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||||
|
*/
|
||||||
#define TEMP_SENSOR_0 5
|
#define TEMP_SENSOR_0 5
|
||||||
#define TEMP_SENSOR_1 0
|
#define TEMP_SENSOR_1 0
|
||||||
#define TEMP_SENSOR_2 0
|
#define TEMP_SENSOR_2 0
|
||||||
#define TEMP_SENSOR_3 0
|
#define TEMP_SENSOR_3 0
|
||||||
#define TEMP_SENSOR_BED 5
|
#define TEMP_SENSOR_BED 5
|
||||||
|
|
||||||
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
|
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||||
|
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||||
|
#define DUMMY_THERMISTOR_999_VALUE 100
|
||||||
|
|
||||||
|
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
|
||||||
|
// from the two sensors differ too much the print will be aborted.
|
||||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||||
|
|
||||||
|
|
@ -435,8 +444,8 @@
|
||||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||||
|
|
||||||
// If all used endstop pins are able to cause interrupts, you can enable ENDSTOP_INTERRUPTS_FEATURE.
|
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||||
// Then the function testing the endstops will only be called, if the state of one of the endstops changed.
|
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||||
//#define ENDSTOP_INTERRUPTS_FEATURE
|
//#define ENDSTOP_INTERRUPTS_FEATURE
|
||||||
|
|
||||||
//=============================================================================
|
//=============================================================================
|
||||||
|
|
|
||||||
|
|
@ -378,19 +378,21 @@ void Stepper::isr() {
|
||||||
}
|
}
|
||||||
|
|
||||||
// Update endstops state, if enabled
|
// Update endstops state, if enabled
|
||||||
if (endstops.enabled
|
if ((endstops.enabled
|
||||||
#if HAS_BED_PROBE
|
#if HAS_BED_PROBE
|
||||||
|| endstops.z_probe_enabled
|
|| endstops.z_probe_enabled
|
||||||
#endif
|
#endif
|
||||||
)
|
)
|
||||||
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
|
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
|
||||||
if(e_hit) {
|
&& e_hit
|
||||||
#endif
|
#endif
|
||||||
|
) {
|
||||||
endstops.update();
|
endstops.update();
|
||||||
|
|
||||||
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
|
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
|
||||||
e_hit--;
|
e_hit--;
|
||||||
}
|
|
||||||
#endif
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
// Take multiple steps per interrupt (For high speed moves)
|
// Take multiple steps per interrupt (For high speed moves)
|
||||||
bool all_steps_done = false;
|
bool all_steps_done = false;
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue