FIL_RUNOUT_INVERTING false by default
This commit is contained in:
parent
7b5cd314a5
commit
dfbf8b3c2c
|
@ -526,7 +526,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -525,7 +525,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -508,7 +508,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -506,7 +506,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -518,7 +518,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -520,7 +520,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -543,7 +543,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -526,7 +526,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -520,7 +520,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -534,7 +534,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -547,7 +547,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -518,7 +518,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -526,7 +526,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -568,7 +568,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -568,7 +568,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -568,7 +568,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -557,7 +557,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -566,7 +566,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -529,7 +529,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
|
@ -516,7 +516,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||
// It is assumed that when logic high = filament available
|
||||
// when logic low = filament ran out
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
const bool FIL_RUNOUT_INVERTING = true; // Should be uncommented and true or false should assigned
|
||||
const bool FIL_RUNOUT_INVERTING = false; // set to true to invert the logic of the sensor.
|
||||
#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
|
Loading…
Reference in a new issue