PROBE_MANUALLY etc.

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -487,7 +487,7 @@
   // Delta calibration menu
   // uncomment to add three points calibration menu option.
   // See http://minow.blogspot.com/index.html#4918805519571907051
-  #define DELTA_CALIBRATION_MENU
+  //#define DELTA_CALIBRATION_MENU
 
   // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
   #define DELTA_AUTO_CALIBRATION
@@ -506,7 +506,7 @@
   #endif
 
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
-    // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
+    // Set the radius for the calibration probe points - max 0.9 * DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 73.5 // mm
     // Set the steprate for papertest probing
     #define PROBE_MANUALLY_STEP 0.025

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -506,7 +506,7 @@
   #endif
 
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
-    // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
+    // Set the radius for the calibration probe points - max 0.9 * DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 73.5 // mm
     // Set the steprate for papertest probing
     #define PROBE_MANUALLY_STEP 0.025

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -496,7 +496,7 @@
   #endif
 
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
-    // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
+    // Set the radius for the calibration probe points - max 0.9 * DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 121.5 // mm
     // Set the steprate for papertest probing
     #define PROBE_MANUALLY_STEP 0.025

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -496,7 +496,7 @@
   #endif
 
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
-    // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
+    // Set the radius for the calibration probe points - max 0.9 * DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 78.0 // mm
     // Set the steprate for papertest probing
     #define PROBE_MANUALLY_STEP 0.025

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -482,7 +482,7 @@
   #endif
 
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
-    // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
+    // Set the radius for the calibration probe points - max 0.9 * DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 110.0 // mm
     // Set the steprate for papertest probing
     #define PROBE_MANUALLY_STEP 0.025

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -500,7 +500,7 @@
   #endif
 
   #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
-    // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
+    // Set the radius for the calibration probe points - max 0.9 * DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 121.5 // mm
     // Set the steprate for papertest probing
     #define PROBE_MANUALLY_STEP 0.025

Marlin/src/gcode/calibrate/G33.cpp

@@ -180,7 +180,7 @@ static float probe_G33_points(float z_at_pt[NPP + 1], const int8_t probe_points,
                     r = delta_calibration_radius * 0.1;
         z_at_pt[CEN] +=
           #if HAS_BED_PROBE
-            probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1)
+            probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1, false)
           #else
             lcd_probe_pt(cos(a) * r, sin(a) * r)
           #endif
@@ -209,7 +209,7 @@ static float probe_G33_points(float z_at_pt[NPP + 1], const int8_t probe_points,
                       interpol = FMOD(axis, 1);
           const float z_temp =
             #if HAS_BED_PROBE
-              probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1)
+              probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1, false)
             #else
               lcd_probe_pt(cos(a) * r, sin(a) * r)
             #endif
@@ -225,7 +225,6 @@ static float probe_G33_points(float z_at_pt[NPP + 1], const int8_t probe_points,
           z_at_pt[axis] /= _7P_STEP / steps;
     }
 
-
     float S1 = z_at_pt[CEN],
           S2 = sq(z_at_pt[CEN]);
     int16_t N = 1;
@@ -263,6 +262,7 @@ static float probe_G33_points(float z_at_pt[NPP + 1], const int8_t probe_points,
 
     LOOP_XYZ(axis) {
       delta_endstop_adj[axis] -= 1.0;
+      recalc_delta_settings();
 
       endstops.enable(true);
       if (!home_delta()) return;
@@ -276,6 +276,7 @@ static float probe_G33_points(float z_at_pt[NPP + 1], const int8_t probe_points,
       LOOP_CAL_ALL(axis) z_at_pt[axis] -= z_at_pt_base[axis];
       print_G33_results(z_at_pt, true, true);
       delta_endstop_adj[axis] += 1.0;
+      recalc_delta_settings();
       switch (axis) {
         case A_AXIS :
           h_fac += 4.0 / (Z03(CEN) +Z01(__A)                               +Z32(_CA) +Z32(_AB)); // Offset by X-tower end-stop
@@ -293,7 +294,7 @@ static float probe_G33_points(float z_at_pt[NPP + 1], const int8_t probe_points,
 
     for (int8_t zig_zag = -1; zig_zag < 2; zig_zag += 2) {
       delta_radius += 1.0 * zig_zag;
-      recalc_delta_settings(delta_radius, delta_diagonal_rod, delta_tower_angle_trim);
+      recalc_delta_settings();
 
       endstops.enable(true);
       if (!home_delta()) return;
@@ -306,7 +307,7 @@ static float probe_G33_points(float z_at_pt[NPP + 1], const int8_t probe_points,
       LOOP_CAL_ALL(axis) z_at_pt[axis] -= z_at_pt_base[axis];
       print_G33_results(z_at_pt, true, true);
       delta_radius -= 1.0 * zig_zag;
-      recalc_delta_settings(delta_radius, delta_diagonal_rod, delta_tower_angle_trim);
+      recalc_delta_settings();
       r_fac -= zig_zag * 6.0 / (Z03(__A) +Z03(__B) +Z03(__C) +Z03(_BC) +Z03(_CA) +Z03(_AB)); // Offset by delta radius
     }
     r_fac /= 2.0;
@@ -319,7 +320,7 @@ static float probe_G33_points(float z_at_pt[NPP + 1], const int8_t probe_points,
       z_temp = MAX3(delta_endstop_adj[A_AXIS], delta_endstop_adj[B_AXIS], delta_endstop_adj[C_AXIS]);
       delta_height -= z_temp;
       LOOP_XYZ(axis) delta_endstop_adj[axis] -= z_temp;
-      recalc_delta_settings(delta_radius, delta_diagonal_rod, delta_tower_angle_trim);
+      recalc_delta_settings();
 
       endstops.enable(true);
       if (!home_delta()) return;
@@ -339,7 +340,7 @@ static float probe_G33_points(float z_at_pt[NPP + 1], const int8_t probe_points,
       z_temp = MAX3(delta_endstop_adj[A_AXIS], delta_endstop_adj[B_AXIS], delta_endstop_adj[C_AXIS]);
       delta_height -= z_temp;
       LOOP_XYZ(axis) delta_endstop_adj[axis] -= z_temp;
-      recalc_delta_settings(delta_radius, delta_diagonal_rod, delta_tower_angle_trim);
+      recalc_delta_settings();
       switch (axis) {
         case A_AXIS :
           a_fac += 4.0 / (          Z06(__B) -Z06(__C)           +Z06(_CA) -Z06(_AB)); // Offset by alpha tower angle
@@ -626,7 +627,7 @@ void GcodeSuite::G33() {
       delta_height -= z_temp;
       LOOP_XYZ(axis) delta_endstop_adj[axis] -= z_temp;
     }
-    recalc_delta_settings(delta_radius, delta_diagonal_rod, delta_tower_angle_trim);
+    recalc_delta_settings();
     NOMORE(zero_std_dev_min, zero_std_dev);
 
     // print report

Marlin/src/gcode/calibrate/M665.cpp

@@ -55,7 +55,7 @@
     if (parser.seen('X')) delta_tower_angle_trim[A_AXIS] = parser.value_float();
     if (parser.seen('Y')) delta_tower_angle_trim[B_AXIS] = parser.value_float();
     if (parser.seen('Z')) delta_tower_angle_trim[C_AXIS] = parser.value_float();
-    recalc_delta_settings(delta_radius, delta_diagonal_rod, delta_tower_angle_trim);
+    recalc_delta_settings();
   }
 
 #elif IS_SCARA

Marlin/src/lcd/language/language_en.h

@@ -752,8 +752,8 @@
 #ifndef MSG_DELTA_HEIGHT_CALIBRATE
   #define MSG_DELTA_HEIGHT_CALIBRATE          _UxGT("Set Delta Height")
 #endif
-#ifndef MSG_DELTA_DIAG_ROG
+#ifndef MSG_DELTA_DIAG_ROD
-  #define MSG_DELTA_DIAG_ROG                  _UxGT("Diag Rod")
+  #define MSG_DELTA_DIAG_ROD                  _UxGT("Diag Rod")
 #endif
 #ifndef MSG_DELTA_HEIGHT
   #define MSG_DELTA_HEIGHT                    _UxGT("Height")

Marlin/src/lcd/ultralcd.cpp

@@ -205,7 +205,7 @@ uint16_t max_display_update_time = 0;
     void lcd_control_retract_menu();
   #endif
 
-  #if ENABLED(DELTA_CALIBRATION_MENU)
+  #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
     void lcd_delta_calibrate_menu();
   #endif
 
@@ -2559,7 +2559,7 @@ void kill_screen(const char* lcd_msg) {
     // Move Axis
     //
     #if ENABLED(DELTA)
-      if (axis_homed[Z_AXIS])
+      if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS])
     #endif
         MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
 
@@ -2674,7 +2674,7 @@ void kill_screen(const char* lcd_msg) {
     //
     // Delta Calibration
     //
-    #if ENABLED(DELTA_CALIBRATION_MENU)
+    #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
       MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, lcd_delta_calibrate_menu);
     #endif
 
@@ -2743,22 +2743,22 @@ void kill_screen(const char* lcd_msg) {
     void _goto_tower_z() { _man_probe_pt(cos(RADIANS( 90)) * delta_calibration_radius, sin(RADIANS( 90)) * delta_calibration_radius); }
     void _goto_center()  { _man_probe_pt(0,0); }
 
-    void _lcd_set_delta_height() {
+  #endif // DELTA_CALIBRATION_MENU
-      update_software_endstops(Z_AXIS);
+
-    }
+  #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
 
     void lcd_delta_settings() {
       START_MENU();
       MENU_BACK(MSG_DELTA_CALIBRATE);
-      MENU_ITEM_EDIT(float52, MSG_DELTA_DIAG_ROG, &delta_diagonal_rod, DELTA_DIAGONAL_ROD - 5.0, DELTA_DIAGONAL_ROD + 5.0);
+      MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_DIAG_ROD, &delta_diagonal_rod, delta_diagonal_rod - 5.0, delta_diagonal_rod + 5.0, recalc_delta_settings);
-      MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10.0, delta_height + 10.0, _lcd_set_delta_height);
+      MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10.0, delta_height + 10.0, recalc_delta_settings);
-      MENU_ITEM_EDIT(float43, "Ex", &delta_endstop_adj[A_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT_CALLBACK(float43, "Ex", &delta_endstop_adj[A_AXIS], -5.0, 5.0, recalc_delta_settings);
-      MENU_ITEM_EDIT(float43, "Ey", &delta_endstop_adj[B_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT_CALLBACK(float43, "Ey", &delta_endstop_adj[B_AXIS], -5.0, 5.0, recalc_delta_settings);
-      MENU_ITEM_EDIT(float43, "Ez", &delta_endstop_adj[C_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT_CALLBACK(float43, "Ez", &delta_endstop_adj[C_AXIS], -5.0, 5.0, recalc_delta_settings);
-      MENU_ITEM_EDIT(float52, MSG_DELTA_RADIUS, &delta_radius, DELTA_RADIUS - 5.0, DELTA_RADIUS + 5.0);
+      MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_RADIUS, &delta_radius, delta_radius - 5.0, delta_radius + 5.0, recalc_delta_settings);
-      MENU_ITEM_EDIT(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT_CALLBACK(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0, recalc_delta_settings);
-      MENU_ITEM_EDIT(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT_CALLBACK(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0, recalc_delta_settings);
-      MENU_ITEM_EDIT(float43, "Tz", &delta_tower_angle_trim[C_AXIS], -5.0, 5.0);
+      MENU_ITEM_EDIT_CALLBACK(float43, "Tz", &delta_tower_angle_trim[C_AXIS], -5.0, 5.0, recalc_delta_settings);
       END_MENU();
     }
 
@@ -2766,7 +2766,6 @@ void kill_screen(const char* lcd_msg) {
       START_MENU();
       MENU_BACK(MSG_MAIN);
       #if ENABLED(DELTA_AUTO_CALIBRATION)
-        MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_settings);
         MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33"));
         MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1"));
         #if ENABLED(EEPROM_SETTINGS)
@@ -2774,17 +2773,20 @@ void kill_screen(const char* lcd_msg) {
           MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
         #endif
       #endif
-      MENU_ITEM(submenu, MSG_AUTO_HOME, _lcd_delta_calibrate_home);
+      MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_settings);
-      if (axis_homed[Z_AXIS]) {
+      #if ENABLED(DELTA_CALIBRATION_MENU)
-        MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_X, _goto_tower_x);
+        MENU_ITEM(submenu, MSG_AUTO_HOME, _lcd_delta_calibrate_home);
-        MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Y, _goto_tower_y);
+        if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS]) {
-        MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Z, _goto_tower_z);
+          MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_X, _goto_tower_x);
-        MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_CENTER, _goto_center);
+          MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Y, _goto_tower_y);
-      }
+          MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Z, _goto_tower_z);
+          MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_CENTER, _goto_center);
+        }
+      #endif
       END_MENU();
     }
 
-  #endif // DELTA_CALIBRATION_MENU
+  #endif // DELTA_CALIBRATION_MENU || DELTA_AUTO_CALIBRATION
 
   /**
    * If the most recent manual move hasn't been fed to the planner yet,

Marlin/src/module/configuration_store.cpp

@@ -225,7 +225,7 @@ void MarlinSettings::postprocess() {
   // Make sure delta kinematics are updated before refreshing the
   // planner position so the stepper counts will be set correctly.
   #if ENABLED(DELTA)
-    recalc_delta_settings(delta_radius, delta_diagonal_rod, delta_tower_angle_trim);
+    recalc_delta_settings();
   #endif
 
   // Refresh steps_to_mm with the reciprocal of axis_steps_per_mm

Marlin/src/module/delta.cpp

@@ -56,18 +56,20 @@ float delta_safe_distance_from_top();
  * Recalculate factors used for delta kinematics whenever
  * settings have been changed (e.g., by M665).
  */
-void recalc_delta_settings(const float radius, const float diagonal_rod, const float tower_angle_trim[ABC]) {
+void recalc_delta_settings() {
   const float trt[ABC] = DELTA_RADIUS_TRIM_TOWER,
               drt[ABC] = DELTA_DIAGONAL_ROD_TRIM_TOWER;
-  delta_tower[A_AXIS][X_AXIS] = cos(RADIANS(210 + tower_angle_trim[A_AXIS])) * (radius + trt[A_AXIS]); // front left tower
+  delta_tower[A_AXIS][X_AXIS] = cos(RADIANS(210 + delta_tower_angle_trim[A_AXIS])) * (delta_radius + trt[A_AXIS]); // front left tower
-  delta_tower[A_AXIS][Y_AXIS] = sin(RADIANS(210 + tower_angle_trim[A_AXIS])) * (radius + trt[A_AXIS]);
+  delta_tower[A_AXIS][Y_AXIS] = sin(RADIANS(210 + delta_tower_angle_trim[A_AXIS])) * (delta_radius + trt[A_AXIS]);
-  delta_tower[B_AXIS][X_AXIS] = cos(RADIANS(330 + tower_angle_trim[B_AXIS])) * (radius + trt[B_AXIS]); // front right tower
+  delta_tower[B_AXIS][X_AXIS] = cos(RADIANS(330 + delta_tower_angle_trim[B_AXIS])) * (delta_radius + trt[B_AXIS]); // front right tower
-  delta_tower[B_AXIS][Y_AXIS] = sin(RADIANS(330 + tower_angle_trim[B_AXIS])) * (radius + trt[B_AXIS]);
+  delta_tower[B_AXIS][Y_AXIS] = sin(RADIANS(330 + delta_tower_angle_trim[B_AXIS])) * (delta_radius + trt[B_AXIS]);
-  delta_tower[C_AXIS][X_AXIS] = cos(RADIANS( 90 + tower_angle_trim[C_AXIS])) * (radius + trt[C_AXIS]); // back middle tower
+  delta_tower[C_AXIS][X_AXIS] = cos(RADIANS( 90 + delta_tower_angle_trim[C_AXIS])) * (delta_radius + trt[C_AXIS]); // back middle tower
-  delta_tower[C_AXIS][Y_AXIS] = sin(RADIANS( 90 + tower_angle_trim[C_AXIS])) * (radius + trt[C_AXIS]);
+  delta_tower[C_AXIS][Y_AXIS] = sin(RADIANS( 90 + delta_tower_angle_trim[C_AXIS])) * (delta_radius + trt[C_AXIS]);
-  delta_diagonal_rod_2_tower[A_AXIS] = sq(diagonal_rod + drt[A_AXIS]);
+  delta_diagonal_rod_2_tower[A_AXIS] = sq(delta_diagonal_rod + drt[A_AXIS]);
-  delta_diagonal_rod_2_tower[B_AXIS] = sq(diagonal_rod + drt[B_AXIS]);
+  delta_diagonal_rod_2_tower[B_AXIS] = sq(delta_diagonal_rod + drt[B_AXIS]);
-  delta_diagonal_rod_2_tower[C_AXIS] = sq(diagonal_rod + drt[C_AXIS]);
+  delta_diagonal_rod_2_tower[C_AXIS] = sq(delta_diagonal_rod + drt[C_AXIS]);
+  update_software_endstops(Z_AXIS);
+  axis_homed[X_AXIS] = axis_homed[Y_AXIS] = axis_homed[Z_AXIS] = false;
 }
 
 /**

Marlin/src/module/delta.h

@@ -43,7 +43,7 @@ extern float delta_tower[ABC][2],
  * Recalculate factors used for delta kinematics whenever
  * settings have been changed (e.g., by M665).
  */
-void recalc_delta_settings(const float radius, const float diagonal_rod, const float tower_angle_trim[ABC]);
+void recalc_delta_settings();
 
 /**
  * Delta Inverse Kinematics

Marlin/src/module/probe.cpp

@@ -509,10 +509,9 @@ static bool do_probe_move(const float z, const float fr_mm_m) {
  * @details Used by probe_pt to do a single Z probe.
  *          Leaves current_position[Z_AXIS] at the height where the probe triggered.
  *
- * @param  short_move Flag for a shorter probe move towards the bed
  * @return The raw Z position where the probe was triggered
  */
-static float run_z_probe(const bool short_move=true) {
+static float run_z_probe() {
 
   #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) DEBUG_POS(">>> run_z_probe", current_position);
@@ -549,8 +548,8 @@ static float run_z_probe(const bool short_move=true) {
     }
   #endif
 
-  // move down slowly to find bed
+  // Move down slowly to find bed, not too far
-  if (do_probe_move(-10 + (short_move ? 0 : -(Z_MAX_LENGTH)), Z_PROBE_SPEED_SLOW)) return NAN;
+  if (do_probe_move(-10, Z_PROBE_SPEED_SLOW)) return NAN;
 
   #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) DEBUG_POS("<<< run_z_probe", current_position);
@@ -589,12 +588,11 @@ float probe_pt(const float &rx, const float &ry, const bool stow, const uint8_t
 
   const float nx = rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ny = ry - (Y_PROBE_OFFSET_FROM_EXTRUDER);
 
-  if (printable
+  if (!printable
     ? !position_is_reachable(nx, ny)
     : !position_is_reachable_by_probe(rx, ry)
   ) return NAN;
 
-
   const float old_feedrate_mm_s = feedrate_mm_s;
 
   #if ENABLED(DELTA)
@@ -602,12 +600,6 @@ float probe_pt(const float &rx, const float &ry, const bool stow, const uint8_t
       do_blocking_move_to_z(delta_clip_start_height);
   #endif
 
-  #if HAS_SOFTWARE_ENDSTOPS
-    // Store the status of the soft endstops and disable if we're probing a non-printable location
-    static bool enable_soft_endstops = soft_endstops_enabled;
-    if (!printable) soft_endstops_enabled = false;
-  #endif
-
   feedrate_mm_s = XY_PROBE_FEEDRATE_MM_S;
 
   // Move the probe to the given XY
@@ -615,7 +607,7 @@ float probe_pt(const float &rx, const float &ry, const bool stow, const uint8_t
 
   float measured_z = NAN;
   if (!DEPLOY_PROBE()) {
-    measured_z = run_z_probe(printable);
+    measured_z = run_z_probe();
 
     if (!stow)
       do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
@@ -623,11 +615,6 @@ float probe_pt(const float &rx, const float &ry, const bool stow, const uint8_t
       if (STOW_PROBE()) measured_z = NAN;
   }
 
-  #if HAS_SOFTWARE_ENDSTOPS
-    // Restore the soft endstop status
-    soft_endstops_enabled = enable_soft_endstops;
-  #endif
-
   if (verbose_level > 2) {
     SERIAL_PROTOCOLPGM("Bed X: ");
     SERIAL_PROTOCOL_F(LOGICAL_X_POSITION(rx), 3);