From e3ab54753b236fff303b65f07e2369eb28c9fae7 Mon Sep 17 00:00:00 2001 From: Sam Lane <9569766+SJ-Innovation@users.noreply.github.com> Date: Tue, 26 Mar 2019 09:02:27 +0000 Subject: [PATCH] Add extra Linear Advance factors (#13490) --- Marlin/Configuration_adv.h | 5 +- Marlin/src/gcode/feature/advance/M900.cpp | 118 ++++++++++++++---- Marlin/src/module/configuration_store.cpp | 11 +- config/default/Configuration_adv.h | 5 +- .../3DFabXYZ/Migbot/Configuration_adv.h | 5 +- .../AlephObjects/TAZ4/Configuration_adv.h | 5 +- .../AliExpress/UM2pExt/Configuration_adv.h | 5 +- config/examples/Anet/A2/Configuration_adv.h | 5 +- .../examples/Anet/A2plus/Configuration_adv.h | 5 +- config/examples/Anet/A6/Configuration_adv.h | 5 +- config/examples/Anet/A8/Configuration_adv.h | 5 +- .../examples/AnyCubic/i3/Configuration_adv.h | 5 +- config/examples/ArmEd/Configuration_adv.h | 5 +- .../BIBO/TouchX/cyclops/Configuration_adv.h | 5 +- .../BIBO/TouchX/default/Configuration_adv.h | 5 +- .../examples/BQ/Hephestos/Configuration_adv.h | 5 +- .../BQ/Hephestos_2/Configuration_adv.h | 5 +- config/examples/BQ/WITBOX/Configuration_adv.h | 5 +- config/examples/Cartesio/Configuration_adv.h | 5 +- .../Creality/CR-10/Configuration_adv.h | 5 +- .../Creality/CR-10S/Configuration_adv.h | 5 +- .../Creality/CR-10_5S/Configuration_adv.h | 5 +- .../Creality/CR-10mini/Configuration_adv.h | 5 +- .../Creality/CR-8/Configuration_adv.h | 5 +- .../Creality/Ender-2/Configuration_adv.h | 5 +- .../Creality/Ender-3/Configuration_adv.h | 5 +- .../Creality/Ender-4/Configuration_adv.h | 5 +- .../examples/Einstart-S/Configuration_adv.h | 5 +- config/examples/Felix/Configuration_adv.h | 5 +- .../FlashForge/CreatorPro/Configuration_adv.h | 5 +- .../FolgerTech/i3-2020/Configuration_adv.h | 5 +- .../Formbot/Raptor/Configuration_adv.h | 5 +- .../Formbot/T_Rex_2+/Configuration_adv.h | 5 +- .../Formbot/T_Rex_3/Configuration_adv.h | 5 +- .../Geeetech/A10M/Configuration_adv.h | 5 +- .../Geeetech/A20M/Configuration_adv.h | 5 +- .../Prusa i3 Pro C/Configuration_adv.h | 5 +- .../Prusa i3 Pro W/Configuration_adv.h | 5 +- .../Infitary/i3-M508/Configuration_adv.h | 5 +- .../examples/JGAurora/A5/Configuration_adv.h | 5 +- .../examples/MakerParts/Configuration_adv.h | 5 +- .../examples/Malyan/M150/Configuration_adv.h | 5 +- .../examples/Malyan/M200/Configuration_adv.h | 5 +- .../Micromake/C1/enhanced/Configuration_adv.h | 5 +- config/examples/Mks/Robin/Configuration_adv.h | 5 +- config/examples/Mks/Sbase/Configuration_adv.h | 5 +- .../RapideLite/RL200/Configuration_adv.h | 5 +- config/examples/RigidBot/Configuration_adv.h | 5 +- config/examples/SCARA/Configuration_adv.h | 5 +- .../examples/Sanguinololu/Configuration_adv.h | 5 +- config/examples/TheBorg/Configuration_adv.h | 5 +- config/examples/TinyBoy2/Configuration_adv.h | 5 +- .../examples/Tronxy/X3A/Configuration_adv.h | 5 +- .../Tronxy/X5S-2E/Configuration_adv.h | 5 +- .../UltiMachine/Archim1/Configuration_adv.h | 5 +- .../UltiMachine/Archim2/Configuration_adv.h | 5 +- .../examples/VORONDesign/Configuration_adv.h | 5 +- .../Velleman/K8200/Configuration_adv.h | 5 +- .../Velleman/K8400/Configuration_adv.h | 5 +- .../WASP/PowerWASP/Configuration_adv.h | 5 +- .../Wanhao/Duplicator 6/Configuration_adv.h | 5 +- .../delta/Anycubic/Kossel/Configuration_adv.h | 5 +- .../FLSUN/auto_calibrate/Configuration_adv.h | 5 +- .../delta/FLSUN/kossel/Configuration_adv.h | 5 +- .../FLSUN/kossel_mini/Configuration_adv.h | 5 +- .../Geeetech/Rostock 301/Configuration_adv.h | 5 +- .../delta/MKS/SBASE/Configuration_adv.h | 5 +- .../Tevo Little Monster/Configuration_adv.h | 5 +- .../delta/generic/Configuration_adv.h | 5 +- .../delta/kossel_mini/Configuration_adv.h | 5 +- .../delta/kossel_xl/Configuration_adv.h | 5 +- .../gCreate/gMax1.5+/Configuration_adv.h | 5 +- config/examples/makibox/Configuration_adv.h | 5 +- .../tvrrug/Round2/Configuration_adv.h | 5 +- config/examples/wt150/Configuration_adv.h | 5 +- 75 files changed, 323 insertions(+), 171 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index fb1cdd016f..dd54fd5d99 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1029,8 +1029,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/Marlin/src/gcode/feature/advance/M900.cpp b/Marlin/src/gcode/feature/advance/M900.cpp index 6b6a3d271e..ceb95dd54c 100644 --- a/Marlin/src/gcode/feature/advance/M900.cpp +++ b/Marlin/src/gcode/feature/advance/M900.cpp @@ -28,45 +28,115 @@ #include "../../../module/planner.h" #include "../../../module/stepper.h" +#if ENABLED(EXTRA_LIN_ADVANCE_K) + float saved_extruder_advance_K[EXTRUDERS]; + uint8_t lin_adv_slot = 0; +#endif + + /** * M900: Get or Set Linear Advance K-factor - * - * K Set advance K factor + * T Which tool to address + * K Set current advance K factor (Slot 0). + * L Set secondary advance K factor (Slot 1). Requires EXTRA_LIN_ADVANCE_K. + * S<0/1> Activate slot 0 or 1. Requires EXTRA_LIN_ADVANCE_K. */ void GcodeSuite::M900() { #if EXTRUDERS < 2 constexpr uint8_t tmp_extruder = 0; #else - const uint8_t tmp_extruder = parser.seenval('T') ? parser.value_int() : active_extruder; + const uint8_t tmp_extruder = parser.intval('T', active_extruder); if (tmp_extruder >= EXTRUDERS) { SERIAL_ECHOLNPGM("?T value out of range."); return; } #endif - if (parser.seenval('K')) { - const float newK = parser.floatval('K'); - if (WITHIN(newK, 0, 10)) { - planner.synchronize(); - planner.extruder_advance_K[tmp_extruder] = newK; - } - else - SERIAL_ECHOLNPGM("?K value out of range (0-10)."); - } - else { - SERIAL_ECHO_START(); - #if EXTRUDERS < 2 - SERIAL_ECHOLNPAIR("Advance K=", planner.extruder_advance_K[0]); - #else - SERIAL_ECHOPGM("Advance K"); - LOOP_L_N(i, EXTRUDERS) { - SERIAL_CHAR(' '); SERIAL_ECHO(int(i)); - SERIAL_CHAR('='); SERIAL_ECHO(planner.extruder_advance_K[i]); + #if ENABLED(EXTRA_LIN_ADVANCE_K) + + bool ext_slot = bitRead(lin_adv_slot, tmp_extruder); + + if (parser.seenval('S')) { + const bool slot = parser.value_bool(); + if (ext_slot != slot) { + ext_slot = slot; + bitWrite(lin_adv_slot, tmp_extruder, slot); + planner.synchronize(); + const float temp = planner.extruder_advance_K[tmp_extruder]; + planner.extruder_advance_K[tmp_extruder] = saved_extruder_advance_K[tmp_extruder]; + saved_extruder_advance_K[tmp_extruder] = temp; } - SERIAL_EOL(); - #endif - } + } + + if (parser.seenval('K')) { + const float newK = parser.value_float(); + if (WITHIN(newK, 0, 10)) { + if (ext_slot) + saved_extruder_advance_K[tmp_extruder] = newK; + else { + planner.synchronize(); + planner.extruder_advance_K[tmp_extruder] = newK; + } + } + else + SERIAL_ECHOLNPGM("?K value out of range (0-10)."); + } + + if (parser.seenval('L')) { + const float newL = parser.value_float(); + if (WITHIN(newL, 0, 10)) { + if (!ext_slot) + saved_extruder_advance_K[tmp_extruder] = newL; + else { + planner.synchronize(); + planner.extruder_advance_K[tmp_extruder] = newL; + } + } + else + SERIAL_ECHOLNPGM("?L value out of range (0-10)."); + } + + if (!parser.seen_any()) { + #if EXTRUDERS < 2 + SERIAL_ECHOLNPAIR("Advance S", ext_slot, " K", planner.extruder_advance_K[0]); + SERIAL_ECHOLNPAIR("(Slot ", 1 - ext_slot, " K", saved_extruder_advance_K[0], ")"); + #else + LOOP_L_N(i, EXTRUDERS) { + const int slot = (int)bitRead(lin_adv_slot, i); + SERIAL_ECHOLNPAIR("Advance T", int(i), " S", slot, " K", planner.extruder_advance_K[i]); + SERIAL_ECHOLNPAIR("(Slot ", 1 - slot, " K", saved_extruder_advance_K[i], ")"); + SERIAL_EOL(); + } + #endif + } + + #else + + if (parser.seenval('K')) { + const float newK = parser.value_float(); + if (WITHIN(newK, 0, 10)) { + planner.synchronize(); + planner.extruder_advance_K[tmp_extruder] = newK; + } + else + SERIAL_ECHOLNPGM("?K value out of range (0-10)."); + } + else { + SERIAL_ECHO_START(); + #if EXTRUDERS < 2 + SERIAL_ECHOLNPAIR("Advance K=", planner.extruder_advance_K[0]); + #else + SERIAL_ECHOPGM("Advance K"); + LOOP_L_N(i, EXTRUDERS) { + SERIAL_CHAR(' '); SERIAL_ECHO(int(i)); + SERIAL_CHAR('='); SERIAL_ECHO(planner.extruder_advance_K[i]); + } + SERIAL_EOL(); + #endif + } + + #endif } #endif // LIN_ADVANCE diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index 833d944447..63af8a1092 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -86,6 +86,10 @@ #include "../feature/pause.h" +#if ENABLED(EXTRA_LIN_ADVANCE_K) +extern float saved_extruder_advance_K[EXTRUDERS]; +#endif + #if EXTRUDERS > 1 #include "tool_change.h" void M217_report(const bool eeprom); @@ -2233,7 +2237,12 @@ void MarlinSettings::reset() { // #if ENABLED(LIN_ADVANCE) - LOOP_L_N(i, EXTRUDERS) planner.extruder_advance_K[i] = LIN_ADVANCE_K; + LOOP_L_N(i, EXTRUDERS) { + planner.extruder_advance_K[i] = LIN_ADVANCE_K; + #if ENABLED(EXTRA_LIN_ADVANCE_K) + saved_extruder_advance_K[i] = LIN_ADVANCE_K; + #endif + } #endif // diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 6a7d0539fd..9fc42e2a08 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 755b1c11f9..03e5720904 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index c6c7285d75..daf0263ea5 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 600a86cdbf..1c70e569a7 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index b8038ed8fd..d1ea6b1d14 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index b8038ed8fd..d1ea6b1d14 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index aea3e5902d..f7baaf9db6 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 95c5b46158..b7c575641a 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 744b4342b8..f716bf235f 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index f884b513e9..412e17607f 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1036,8 +1036,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index baa7629e2a..cf08ec73b8 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 6636407c26..ebfe84b647 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index c436b10199..ab345e5a2f 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1029,8 +1029,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index a8549fb4a3..a2df53cbb6 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1037,8 +1037,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index c436b10199..ab345e5a2f 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1029,8 +1029,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 15e8fad4d2..a75559b455 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 2381632e6f..2ff6954fb0 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index 607429c4fb..047b4c5ad8 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index 085bd2df0a..97a9af3154 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h index 6fe46f1888..1c4ebf88a6 100644 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 15187211da..0cb4623c8e 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 4351c0fbcb..5ab9f3d406 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1029,8 +1029,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h index b716135211..f04b32d339 100644 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1029,8 +1029,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 34eaa61d40..96d8ea73db 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 268034a915..566d43eb2a 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h index 89522e4701..6133d533d1 100644 --- a/config/examples/Felix/Configuration_adv.h +++ b/config/examples/Felix/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 6c73c50fb5..2c5df97610 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1028,8 +1028,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index cbde4c0dbc..746b1bbdbb 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 7bfe83f4c0..9433f006a7 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1034,8 +1034,9 @@ #define LIN_ADVANCE #endif #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 20dbb1c281..626d45b8bc 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1036,8 +1036,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 8d5a30d3ba..43e803dea6 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1036,8 +1036,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 154f8112cb..1b47c35da3 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index da1c3eb393..f72ce4a23c 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 9eb0b35f0c..35f5d4dc75 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 9eb0b35f0c..35f5d4dc75 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index a91b9a143c..d07fb96dfd 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 4868557501..4f054a6af2 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1029,8 +1029,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index ac0bba2040..347d8367b7 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index a78fe30f7a..468ff28fd1 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 0437a737e3..ff84f30b33 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 6a7d0539fd..9fc42e2a08 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 8b696aa932..53d2232824 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 7446ec062e..eb0726fd13 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1033,8 +1033,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 49c99e7a74..aadb4ee73b 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 015603151b..54cf0e1906 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h index a7737510e0..0dc21569e7 100644 --- a/config/examples/SCARA/Configuration_adv.h +++ b/config/examples/SCARA/Configuration_adv.h @@ -1029,8 +1029,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index dbd5b6067c..e6b70c8638 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 91bbb2e09f..bc702ccc35 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 62d3004bd0..8c80b81730 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 8b3f111038..26400dea83 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 55c1944c7b..b8f0d44dff 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 2ac05f109e..01e11c2383 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index ee27d50832..c6f38b8c39 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index acb0c9ec82..dfffc201c3 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index fdd3360ba0..d25216b7ff 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1045,8 +1045,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h index 3ef3c734ef..831dd286c5 100644 --- a/config/examples/Velleman/K8400/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index a9bacc3152..d0ec4516de 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index bbe3386ac3..a523dadbb6 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1031,8 +1031,9 @@ */ #define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.00 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index e187a00eb6..23f077c888 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1031,8 +1031,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index ada2271177..dc502831ba 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1031,8 +1031,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index ada2271177..dc502831ba 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1031,8 +1031,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 39749f07ba..2da757143b 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1031,8 +1031,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 39749f07ba..2da757143b 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1031,8 +1031,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index f6ef2ce04b..5f6285300b 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1031,8 +1031,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 094e944b49..2631a86202 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1031,8 +1031,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 39749f07ba..2da757143b 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1031,8 +1031,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 60e6f7b619..12c2b3f42b 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1030,8 +1030,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 32b0e372ef..6f5815e30d 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1031,8 +1031,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index b2e8e5e859..808c2ae415 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 71677eeef9..3693195370 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 5566746b6b..6a241cbec4 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1032,8 +1032,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h index 0b1ab4e249..1a68752e5a 100644 --- a/config/examples/wt150/Configuration_adv.h +++ b/config/examples/wt150/Configuration_adv.h @@ -1033,8 +1033,9 @@ */ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling