zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Simplify power supply naming logic (#14488)

Browse source 
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
This commit is contained in:
Tim Moore 2019-07-04 23:58:34 -07:00 committed by Scott Lahteine
parent 44e4f853c8
commit eb6dec03bd
119 changed files with 1141 additions and 1460 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

23
Marlin/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

4
Marlin/src/Marlin.h
View file

@ -349,8 +349,8 @@ extern millis_t max_inactive_time, stepper_inactive_time;
#if HAS_POWER_SWITCH #if HAS_POWER_SWITCH
extern bool powersupply_on; extern bool powersupply_on;
#define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); powersupply_on = true; }while(0) #define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_HIGH); powersupply_on = true; }while(0)
#define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); powersupply_on = false; }while(0) #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_HIGH); powersupply_on = false; }while(0)
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define PSU_ON() powerManager.power_on() #define PSU_ON() powerManager.power_on()
#define PSU_OFF() powerManager.power_off() #define PSU_OFF() powerManager.power_off()

4
Marlin/src/gcode/gcode.h
View file

@ -111,8 +111,8 @@
* M76 - Pause the print job timer. * M76 - Pause the print job timer.
* M77 - Stop the print job timer. * M77 - Stop the print job timer.
* M78 - Show statistical information about the print jobs. (Requires PRINTCOUNTER) * M78 - Show statistical information about the print jobs. (Requires PRINTCOUNTER)
* M80 - Turn on Power Supply. (Requires POWER_SUPPLY > 0) * M80 - Turn on Power Supply. (Requires PSU_CONTROL)
* M81 - Turn off Power Supply. (Requires POWER_SUPPLY > 0) * M81 - Turn off Power Supply. (Requires PSU_CONTROL)
* M82 - Set E codes absolute (default). * M82 - Set E codes absolute (default).
* M83 - Set E codes relative while in Absolute (G90) mode. * M83 - Set E codes relative while in Absolute (G90) mode.
* M84 - Disable steppers until next move, or use S<seconds> to specify an idle * M84 - Disable steppers until next move, or use S<seconds> to specify an idle

2
Marlin/src/inc/Conditionals_LCD.h
View file

@ -148,7 +148,7 @@
#define LCD_CONTRAST_MAX 255 #define LCD_CONTRAST_MAX 255
#define DEFAULT_LCD_CONTRAST 220 #define DEFAULT_LCD_CONTRAST 220
#define LED_COLORS_REDUCE_GREEN #define LED_COLORS_REDUCE_GREEN
#if POWER_SUPPLY > 0 && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) #if (HAS_POWER_SWITCH && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1))
#define LED_BACKLIGHT_TIMEOUT 10000 #define LED_BACKLIGHT_TIMEOUT 10000
#endif #endif

27
Marlin/src/inc/Conditionals_post.h
View file

@ -269,19 +269,22 @@
#define DISABLE_INACTIVE_E DISABLE_E #define DISABLE_INACTIVE_E DISABLE_E
#endif #endif
// Power Signal Control Definitions /**
// By default use ATX definition * Power Supply Control
#ifndef POWER_SUPPLY */
#define POWER_SUPPLY 1 #ifndef PSU_NAME
#if ENABLED(PSU_CONTROL)
#if PSU_ACTIVE_HIGH
#define PSU_NAME "XBox" // X-Box 360 (203W)
#else
#define PSU_NAME "ATX" // ATX style
#endif
#else
#define PSU_NAME "Generic" // No control
#endif
#endif #endif
#if (POWER_SUPPLY == 1) // 1 = ATX
#define PS_ON_AWAKE LOW #define HAS_POWER_SWITCH (ENABLED(PSU_CONTROL) && PIN_EXISTS(PS_ON))
#define PS_ON_ASLEEP HIGH
#elif (POWER_SUPPLY == 2) // 2 = X-Box 360 203W
#define PS_ON_AWAKE HIGH
#define PS_ON_ASLEEP LOW
#endif
#define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON))
/** /**
* Temp Sensor defines * Temp Sensor defines

15
Marlin/src/inc/SanityCheck.h
View file

@ -376,6 +376,12 @@
#error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h." #error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h."
#elif defined(USB_SD_ONBOARD) #elif defined(USB_SD_ONBOARD)
#error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead." #error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead."
#elif POWER_SUPPLY == 1
#error "Replace POWER_SUPPLY 1 by enabling PSU_CONTROL and setting PSU_ACTIVE_HIGH to 'false'."
#elif POWER_SUPPLY == 2
#error "Replace POWER_SUPPLY 2 by enabling PSU_CONTROL and setting PSU_ACTIVE_HIGH to 'true'."
#elif defined(POWER_SUPPLY)
#error "POWER_SUPPLY is now obsolete. Please remove it from Configuration.h."
#endif #endif
#define BOARD_MKS_13 -47 #define BOARD_MKS_13 -47
@ -1548,7 +1554,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/** /**
* LED Backlight Timeout * LED Backlight Timeout
*/ */
#if defined(LED_BACKLIGHT_TIMEOUT) && !(EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && POWER_SUPPLY > 0) #if defined(LED_BACKLIGHT_TIMEOUT) && !(EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && HAS_POWER_SWITCH)
#error "LED_BACKLIGHT_TIMEOUT requires a Fysetc Mini Panel and a Power Switch." #error "LED_BACKLIGHT_TIMEOUT requires a Fysetc Mini Panel and a Power Switch."
#endif #endif
@ -2297,6 +2303,13 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#endif #endif
#endif #endif
/**
* Ensure this option is set intentionally
*/
#if ENABLED(PSU_CONTROL) && !defined(PSU_ACTIVE_HIGH)
#error "PSU_CONTROL requires PSU_ACTIVE_HIGH to be defined as 'true' or 'false'."
#endif
#if HAS_CUTTER #if HAS_CUTTER
#define _PIN_CONFLICT(P) (PIN_EXISTS(P) && P##_PIN == SPINDLE_LASER_PWM_PIN) #define _PIN_CONFLICT(P) (PIN_EXISTS(P) && P##_PIN == SPINDLE_LASER_PWM_PIN)
#if BOTH(SPINDLE_FEATURE, LASER_FEATURE) #if BOTH(SPINDLE_FEATURE, LASER_FEATURE)

8
Marlin/src/lcd/menu/menu_info.cpp
View file

@ -176,13 +176,7 @@ void menu_info_board() {
STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController
STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000 STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000
STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION, true); // Protocol: 1.0 STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION, true); // Protocol: 1.0
#if POWER_SUPPLY == 0 STATIC_ITEM(MSG_INFO_PSU ": " PSU_NAME, true);
STATIC_ITEM(MSG_INFO_PSU ": Generic", true);
#elif POWER_SUPPLY == 1
STATIC_ITEM(MSG_INFO_PSU ": ATX", true); // Power Supply: ATX
#elif POWER_SUPPLY == 2
STATIC_ITEM(MSG_INFO_PSU ": XBox", true); // Power Supply: XBox
#endif
END_SCREEN(); END_SCREEN();
} }

2
Marlin/src/pins/pins.h
View file

@ -741,7 +741,7 @@
#ifndef LED_PIN #ifndef LED_PIN
#define LED_PIN -1 #define LED_PIN -1
#endif #endif
#if POWER_SUPPLY == 0 || !defined(PS_ON_PIN) #if DISABLED(PSU_CONTROL) || !defined(PS_ON_PIN)
#undef PS_ON_PIN #undef PS_ON_PIN
#define PS_ON_PIN -1 #define PS_ON_PIN -1
#endif #endif

4
Marlin/src/pins/pins_MKS_GEN_13.h
View file

@ -44,9 +44,9 @@
// //
// PSU / SERVO // PSU / SERVO
// //
// If POWER_SUPPLY is specified, always hijack Servo 3 // If PSU_CONTROL is specified, always hijack Servo 3
// //
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
#define SERVO3_PIN -1 #define SERVO3_PIN -1
#define PS_ON_PIN 4 #define PS_ON_PIN 4
#endif #endif

3
buildroot/share/tests/megaatmega2560-tests
View file

@ -27,7 +27,6 @@ opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_0 -2 opt_set TEMP_SENSOR_0 -2
opt_set TEMP_SENSOR_1 1 opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_BED 2 opt_set TEMP_SENSOR_BED 2
opt_set POWER_SUPPLY 1
opt_set GRID_MAX_POINTS_X 16 opt_set GRID_MAX_POINTS_X 16
opt_set FANMUX0_PIN 53 opt_set FANMUX0_PIN 53
opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING EEPROM_SETTINGS \ opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING EEPROM_SETTINGS \
@ -37,7 +36,7 @@ opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING EEPROM_SETTINGS \
AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \ SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
FWRETRACT ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \ FWRETRACT ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \ PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST PINS_DEBUGGING \ LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST PINS_DEBUGGING \
MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING BACKLASH_COMPENSATION BACKLASH_GCODE MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING BACKLASH_COMPENSATION BACKLASH_GCODE
opt_enable SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER opt_enable SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER

23
config/default/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/AlephObjects/TAZ4/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Anet/A2/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Anet/A2plus/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Anet/A6/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Anet/A8/Configuration.h
View file

@ -313,22 +313,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Anet/A8plus/Configuration.h
View file

@ -313,22 +313,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Anet/E16/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/AnyCubic/i3/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/ArmEd/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/BQ/Hephestos/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -320,22 +320,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -345,7 +343,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/BQ/WITBOX/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Cartesio/Configuration.h
View file

@ -313,22 +313,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Creality/CR-10/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Creality/CR-10S/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Creality/CR-10_5S/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Creality/CR-10mini/Configuration.h
View file

@ -321,22 +321,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -346,7 +344,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Creality/CR-20 Pro/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Creality/CR-20/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Creality/CR-8/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Creality/Ender-2/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Creality/Ender-3/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Creality/Ender-4/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

25
config/examples/Creality/Ender-5/Configuration.h
View file

@ -312,30 +312,29 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
#define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CONTROLLERFAN
#define AUTO_POWER_CHAMBER_FAN #define AUTO_POWER_CHAMBER_FAN
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Dagoma/Disco Ultimate/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Einstart-S/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Felix/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Felix/DUAL/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/FlashForge/CreatorPro/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/FolgerTech/i3-2020/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Formbot/Raptor/Configuration.h
View file

@ -353,22 +353,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -378,7 +376,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Formbot/T_Rex_2+/Configuration.h
View file

@ -321,22 +321,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -346,7 +344,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Formbot/T_Rex_3/Configuration.h
View file

@ -316,22 +316,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -341,7 +339,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Fysetc/AIO_II/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Fysetc/CHEETAH/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Fysetc/F6_13/Configuration.h
View file

@ -314,22 +314,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -339,7 +337,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Geeetech/A10/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Geeetech/A10M/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Geeetech/A20M/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Geeetech/GT2560/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Geeetech/MeCreator2/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Infitary/i3-M508/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/JGAurora/A1/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/JGAurora/A5/Configuration.h
View file

@ -317,22 +317,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -342,7 +340,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/JGAurora/A5S/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/MakerParts/Configuration.h
View file

@ -332,22 +332,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -357,7 +355,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Malyan/M150/Configuration.h
View file

@ -317,22 +317,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -342,7 +340,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Malyan/M200/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Micromake/C1/basic/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Micromake/C1/enhanced/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Mks/Robin/Configuration.h
View file

@ -313,22 +313,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Mks/Sbase/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Printrbot/PrintrboardG2/Configuration.h
View file

@ -313,22 +313,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/RapideLite/RL200/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/RepRapPro/Huxley/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/RepRapWorld/Megatronics/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/RigidBot/Configuration.h
View file

@ -315,22 +315,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -340,7 +338,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/SCARA/Configuration.h
View file

@ -339,22 +339,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -364,7 +362,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/STM32/Black_STM32F407VET6/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/STM32/STM32F10/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/STM32/STM32F4/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/STM32/stm32f103ret6/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Sanguinololu/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Tevo/Tarantula Pro/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/TheBorg/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/TinyBoy2/Configuration.h
View file

@ -334,22 +334,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -359,7 +357,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Tronxy/X1/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Tronxy/X3A/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Tronxy/X5S-2E/Configuration.h
View file

@ -314,22 +314,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -339,7 +337,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Tronxy/X5S/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Tronxy/XY100/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/UltiMachine/Archim1/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/UltiMachine/Archim2/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/VORONDesign/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Velleman/K8200/Configuration.h
View file

@ -332,22 +332,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 0 //#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -357,7 +355,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Velleman/K8400/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

23
config/examples/Velleman/K8400/Dual-head/Configuration.h
View file

@ -312,22 +312,20 @@
// @section machine // @section machine
/** /**
* Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN * Power Supply Control
* *
* 0 = No Power Switch * Enable and connect the power supply to the PS_ON_PIN.
* 1 = ATX * Specify whether the power supply is active HIGH or active LOW.
* 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
*
* :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
*/ */
#define POWER_SUPPLY 1 #define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#if POWER_SUPPLY > 0 #if ENABLED(PSU_CONTROL)
// Enable this option to leave the PSU off at startup. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
// Power to steppers and heaters will need to be turned on with M80.
//#define PS_DEFAULT_OFF
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
//#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL) #if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS #define AUTO_POWER_E_FANS
@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30 #define POWER_TIMEOUT 30
#endif #endif
#endif #endif
// @section temperature // @section temperature

Some files were not shown because too many files have changed in this diff Show more