New options: Bootscreen as Info, game Easter-egg (#13829)

Marlin/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/lcd/dogm/ultralcd_DOGM.cpp

@@ -105,56 +105,63 @@ void MarlinUI::set_font(const MarlinFont font_nr) {
 #if ENABLED(SHOW_BOOTSCREEN)
 
   #if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
-
+    // Draws a slice of a particular frame of the custom bootscreen, without the u8g loop
-    FORCE_INLINE void draw_custom_bootscreen(const u8g_pgm_uint8_t * const bmp, const bool erase=true) {
+    void MarlinUI::draw_custom_bootscreen(const uint8_t frame/*=0*/) {
       constexpr u8g_uint_t left = u8g_uint_t((LCD_PIXEL_WIDTH  - (CUSTOM_BOOTSCREEN_BMPWIDTH)) / 2),
                            top = u8g_uint_t((LCD_PIXEL_HEIGHT - (CUSTOM_BOOTSCREEN_BMPHEIGHT)) / 2);
       #if ENABLED(CUSTOM_BOOTSCREEN_INVERTED)
         constexpr u8g_uint_t right = left + CUSTOM_BOOTSCREEN_BMPWIDTH,
                             bottom = top + CUSTOM_BOOTSCREEN_BMPHEIGHT;
       #endif
-      u8g.firstPage();
+
-      do {
+      const u8g_pgm_uint8_t * const bmp =
+        #if ENABLED(ANIMATED_BOOTSCREEN)
+          (u8g_pgm_uint8_t*)pgm_read_ptr(&custom_bootscreen_animation[frame])
+        #else
+          custom_start_bmp
+        #endif
+      ;
+
       u8g.drawBitmapP(
         left, top,
         CEILING(CUSTOM_BOOTSCREEN_BMPWIDTH, 8), CUSTOM_BOOTSCREEN_BMPHEIGHT, bmp
       );
+
       #if ENABLED(CUSTOM_BOOTSCREEN_INVERTED)
-          if (erase) {
+        if (frame == 0) {
           u8g.setColorIndex(1);
           if (top) u8g.drawBox(0, 0, LCD_PIXEL_WIDTH, top);
           if (left) u8g.drawBox(0, top, left, CUSTOM_BOOTSCREEN_BMPHEIGHT);
           if (right < LCD_PIXEL_WIDTH) u8g.drawBox(right, top, LCD_PIXEL_WIDTH - right, CUSTOM_BOOTSCREEN_BMPHEIGHT);
           if (bottom < LCD_PIXEL_HEIGHT) u8g.drawBox(0, bottom, LCD_PIXEL_WIDTH, LCD_PIXEL_HEIGHT - bottom);
         }
-        #else
-          UNUSED(erase);
       #endif
-      } while (u8g.nextPage());
     }
 
-    void lcd_custom_bootscreen() {
+    // Shows the custom bootscreen, with the u8g loop, animations and delays
-      #if ENABLED(ANIMATED_BOOTSCREEN)
+    void MarlinUI::show_custom_bootscreen() {
-        LOOP_L_N(f, COUNT(custom_bootscreen_animation)) {
+      #if DISABLED(ANIMATED_BOOTSCREEN)
-          if (f) safe_delay(CUSTOM_BOOTSCREEN_FRAME_TIME);
+        constexpr millis_t d = 0;
-          draw_custom_bootscreen((u8g_pgm_uint8_t*)pgm_read_ptr(&custom_bootscreen_animation[f]), f == 0);
+        constexpr uint8_t f = 0;
-        }
       #else
-        draw_custom_bootscreen(custom_start_bmp);
+        constexpr millis_t d = CUSTOM_BOOTSCREEN_FRAME_TIME;
+        LOOP_L_N(f, COUNT(custom_bootscreen_animation))
       #endif
+        {
+          u8g.firstPage();
+          do { draw_custom_bootscreen(f); } while (u8g.nextPage());
+          if (d) safe_delay(d);
+        }
+
       #ifndef CUSTOM_BOOTSCREEN_TIMEOUT
         #define CUSTOM_BOOTSCREEN_TIMEOUT 2500
       #endif
       safe_delay(CUSTOM_BOOTSCREEN_TIMEOUT);
     }
-
   #endif // SHOW_CUSTOM_BOOTSCREEN
 
-  void MarlinUI::show_bootscreen() {
+  // Draws a slice of the Marlin bootscreen, without the u8g loop
-    #if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
+  void MarlinUI::draw_marlin_bootscreen() {
-      lcd_custom_bootscreen();
-    #endif
-
     // Screen dimensions.
     //const uint8_t width = u8g.getWidth(), height = u8g.getHeight();
     constexpr uint8_t width = LCD_PIXEL_WIDTH, height = LCD_PIXEL_HEIGHT;
@@ -193,8 +200,6 @@ void MarlinUI::set_font(const MarlinFont font_nr) {
     NOLESS(offx, 0);
     NOLESS(offy, 0);
 
-    u8g.firstPage();
-    do {
     u8g.drawBitmapP(offx, offy, (START_BMPWIDTH + 7) / 8, START_BMPHEIGHT, start_bmp);
     set_font(FONT_MENU);
     #ifndef STRING_SPLASH_LINE2
@@ -203,13 +208,25 @@ void MarlinUI::set_font(const MarlinFont font_nr) {
       u8g.drawStr(txt_offx_1, txt_base - (MENU_FONT_HEIGHT), STRING_SPLASH_LINE1);
       u8g.drawStr(txt_offx_2, txt_base, STRING_SPLASH_LINE2);
     #endif
-    } while (u8g.nextPage());
+  }
+
+  // Shows the Marlin bootscreen, with the u8g loop and delays
+  void MarlinUI::show_marlin_bootscreen() {
     #ifndef BOOTSCREEN_TIMEOUT
       #define BOOTSCREEN_TIMEOUT 2500
     #endif
+    u8g.firstPage();
+    do { draw_marlin_bootscreen(); } while (u8g.nextPage());
     safe_delay(BOOTSCREEN_TIMEOUT);
   }
 
+  void MarlinUI::show_bootscreen() {
+    #if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
+      show_custom_bootscreen();
+    #endif
+    show_marlin_bootscreen();
+  }
+
 #endif // SHOW_BOOTSCREEN
 
 #if ENABLED(LIGHTWEIGHT_UI)

Marlin/src/lcd/language/language_en.h

@@ -1385,6 +1385,9 @@
 #ifndef MSG_END_Z
   #define MSG_END_Z                           _UxGT("  End Z")
 #endif
+#ifndef MSG_GAMES
+  #define MSG_GAMES                           _UxGT("Games")
+#endif
 #ifndef MSG_BRICKOUT
   #define MSG_BRICKOUT                        _UxGT("Brickout")
 #endif

Marlin/src/lcd/menu/menu_info.cpp

@@ -28,12 +28,12 @@
 
 #if HAS_LCD_MENU && ENABLED(LCD_INFO_MENU)
 
+#include "menu.h"
+
 #if HAS_GAMES
   #include "game/game.h"
 #endif
 
-#include "menu.h"
-
 #if ENABLED(PRINTCOUNTER)
 
   #include "../../module/printcounter.h"
@@ -175,6 +175,7 @@ void menu_info_board() {
 //
 // About Printer > Printer Info
 //
+#if DISABLED(LCD_PRINTER_INFO_IS_BOOTSCREEN)
   void menu_info_printer() {
     if (ui.use_click()) return ui.goto_previous_screen();
     START_SCREEN();
@@ -197,6 +198,19 @@ void menu_info_printer() {
     #endif
     END_SCREEN();
   }
+#else
+  void menu_show_marlin_bootscreen() {
+    if (ui.use_click()) { ui.goto_previous_screen_no_defer(); }
+    ui.draw_marlin_bootscreen();
+  }
+
+  #if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
+    void menu_show_custom_bootscreen() {
+      if (ui.use_click()) { ui.goto_screen(menu_show_marlin_bootscreen); }
+      ui.draw_custom_bootscreen();
+    }
+  #endif
+#endif // LCD_PRINTER_INFO_IS_BOOTSCREEN
 
 //
 // "About Printer" submenu
@@ -204,14 +218,30 @@ void menu_info_printer() {
 void menu_info() {
   START_MENU();
   MENU_BACK(MSG_MAIN);
+  #if ENABLED(LCD_PRINTER_INFO_IS_BOOTSCREEN)
+    MENU_ITEM(submenu, MSG_INFO_PRINTER_MENU, (
+      #if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
+        menu_show_custom_bootscreen
+      #else
+        menu_show_marlin_bootscreen
+      #endif
+    ));
+  #else
     MENU_ITEM(submenu, MSG_INFO_PRINTER_MENU, menu_info_printer);        // Printer Info >
     MENU_ITEM(submenu, MSG_INFO_BOARD_MENU, menu_info_board);            // Board Info >
     MENU_ITEM(submenu, MSG_INFO_THERMISTOR_MENU, menu_info_thermistors); // Thermistors >
+  #endif
+
   #if ENABLED(PRINTCOUNTER)
     MENU_ITEM(submenu, MSG_INFO_STATS_MENU, menu_info_stats);          // Printer Stats >
   #endif
+
   #if HAS_GAMES
-    MENU_ITEM(submenu, "Game", (
+    #if ENABLED(GAMES_EASTER_EGG)
+      MENU_ITEM_DUMMY();
+      MENU_ITEM_DUMMY();
+    #endif
+    MENU_ITEM(submenu, MSG_GAMES, (
       #if HAS_GAME_MENU
         menu_game
       #elif ENABLED(MARLIN_BRICKOUT)
@@ -225,6 +255,7 @@ void menu_info() {
       #endif
     ));
   #endif
+
   END_MENU();
 }
 

Marlin/src/lcd/menu/menu_main.cpp

@@ -250,7 +250,11 @@ void menu_main() {
   #endif
 
   #if HAS_GAMES && DISABLED(LCD_INFO_MENU)
-    MENU_ITEM(submenu, "Game", (
+    #if ENABLED(GAMES_EASTER_EGG)
+      MENU_ITEM_DUMMY();
+      MENU_ITEM_DUMMY();
+    #endif
+    MENU_ITEM(submenu, MSG_GAMES, (
       #if HAS_GAME_MENU
         menu_game
       #elif ENABLED(MARLIN_BRICKOUT)

Marlin/src/lcd/ultralcd.h

@@ -315,7 +315,14 @@ public:
       static inline void refresh(const LCDViewAction type) { lcdDrawUpdate = type; }
       static inline void refresh() { refresh(LCDVIEW_CLEAR_CALL_REDRAW); }
 
+      #if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
+        static void draw_custom_bootscreen(const uint8_t frame=0);
+        static void show_custom_bootscreen();
+      #endif
+
       #if ENABLED(SHOW_BOOTSCREEN)
+        static void draw_marlin_bootscreen();
+        static void show_marlin_bootscreen();
         static void show_bootscreen();
       #endif
 

Marlin/src/module/configuration_store.cpp

@@ -2028,8 +2028,7 @@ void MarlinSettings::postprocess() {
           const char extui_data[ExtUI::eeprom_data_size] = { 0 };
           _FIELD_TEST(extui_data);
           EEPROM_READ(extui_data);
-          if(!validating)
+          if (!validating) ExtUI::onLoadSettings(extui_data);
-            ExtUI::onLoadSettings(extui_data);
         }
       #endif
 

config/default/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Alfawise/U20/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1138,6 +1141,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Anet/A2/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Anet/A2plus/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Anet/A6/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Anet/A8/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Anet/A8plus/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Anet/E16/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/ArmEd/Configuration_adv.h

@@ -855,6 +855,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1139,6 +1142,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -859,6 +859,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1143,6 +1146,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Cartesio/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/CR-10/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/CR-20/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/CR-8/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Creality/Ender-5/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Einstart-S/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/FYSETC/Cheetah/base/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Felix/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -850,6 +850,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1134,6 +1137,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -855,6 +855,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1139,6 +1142,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -855,6 +855,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1139,6 +1142,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Geeetech/A10/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/JGAurora/A1/Configuration_adv.h

@@ -856,6 +856,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1140,6 +1143,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/JGAurora/A5/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/JGAurora/A5S/Configuration_adv.h

@@ -856,6 +856,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1140,6 +1143,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/MakerParts/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Malyan/M150/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Malyan/M200/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Mks/Robin/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Mks/Sbase/Configuration_adv.h

@@ -852,6 +852,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1136,6 +1139,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/RigidBot/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/SCARA/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Sanguinololu/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Tevo/Michelangelo/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Tevo/Tarantula Pro/Configuration_adv.h

@@ -847,6 +847,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1131,6 +1134,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/TheBorg/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/TinyBoy2/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/VORONDesign/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Velleman/K8200/Configuration_adv.h

@@ -864,6 +864,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1148,6 +1151,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Velleman/K8400/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 #define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/delta/generic/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/delta/kossel_mini/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/delta/kossel_xl/Configuration_adv.h

@@ -853,6 +853,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1137,6 +1140,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 

config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -851,6 +851,9 @@
 
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
+#if ENABLED(LCD_INFO_MENU)
+  //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+#endif
 
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
@@ -1135,6 +1138,7 @@
   //#define MARLIN_BRICKOUT
   //#define MARLIN_INVADERS
   //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD