zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Merge patches from bugfix-2.0.x

Browse source
This commit is contained in:
Scott Lahteine 2020-03-24 17:10:53 -05:00
parent d37bfa3b4e 68face848a
commit efc19260a7
260 changed files with 13685 additions and 13085 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
Marlin/Configuration.h
View file

@ -99,6 +99,7 @@
/**
* Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port -1 is the USB emulated serial port, if available.
* Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
@ -107,9 +108,6 @@
/**
* Select a secondary serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port -1 is the USB emulated serial port, if available.
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
//#define SERIAL_PORT_2 -1
@ -363,6 +361,7 @@
* 331 : (3.3V scaled thermistor 1 table for MEGA)
* 332 : (3.3V scaled thermistor 1 table for DUE)
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
* 202 : 200k thermistor - Copymaster 3D
* 3 : Mendel-parts thermistor (4.7k pullup)
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
* 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)

19
Marlin/Configuration_adv.h
View file

@ -338,15 +338,22 @@
* Controller Fan
* To cool down the stepper drivers and MOSFETs.
*
* The fan will turn on automatically whenever any stepper is enabled
* and turn off after a set period after all steppers are turned off.
* The fan turns on automatically whenever any driver is enabled and turns
* off (or reduces to idle speed) shortly after drivers are turned off.
*
*/
//#define USE_CONTROLLER_FAN
#if ENABLED(USE_CONTROLLER_FAN)
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
#define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
#define CONTROLLERFAN_SPEED 255 // 255 == full speed
//#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled
//#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
//#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
#define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
#define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
#if ENABLED(CONTROLLER_FAN_EDITABLE)
#define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu
#endif
#endif
// When first starting the main fan, run it at full speed for the

2
Marlin/Makefile
View file

@ -267,6 +267,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1147)
else ifeq ($(HARDWARE_MOTHERBOARD),1148)
# MKS GEN L V2
else ifeq ($(HARDWARE_MOTHERBOARD),1149)
# Copymaster 3D
else ifeq ($(HARDWARE_MOTHERBOARD),1150)
#
# RAMBo and derivatives

5
Marlin/src/HAL/DUE/HAL.h
View file

@ -39,7 +39,7 @@
#include <stdint.h>
// Define MYSERIAL0/1 before MarlinSerial includes!
#if SERIAL_PORT == -1
#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
#define MYSERIAL0 customizedSerial1
#elif SERIAL_PORT == 0
#define MYSERIAL0 Serial
@ -56,7 +56,7 @@
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
#elif SERIAL_PORT_2 == -1
#elif SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
#define MYSERIAL1 customizedSerial2
#elif SERIAL_PORT_2 == 0
#define MYSERIAL1 Serial
@ -94,7 +94,6 @@
#endif
#endif
#include "MarlinSerial.h"
#include "MarlinSerialUSB.h"

20
Marlin/src/HAL/DUE/MarlinSerial.cpp
View file

@ -629,23 +629,13 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
// If not using the USB port as serial port
#if SERIAL_PORT >= 0
// Preinstantiate
template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
// Instantiate
MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>; // Define
MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1; // Instantiate
#endif
#ifdef SERIAL_PORT_2
// Preinstantiate
template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
// Instantiate
MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>; // Define
MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2; // Instantiate
#endif
#endif // ARDUINO_ARCH_SAM

12
Marlin/src/HAL/DUE/MarlinSerial.h
View file

@ -172,13 +172,9 @@ struct MarlinSerialCfg {
};
#if SERIAL_PORT >= 0
extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
#endif // SERIAL_PORT >= 0
#ifdef SERIAL_PORT_2
extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
#endif
#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
#endif

12
Marlin/src/HAL/DUE/MarlinSerialUSB.cpp
View file

@ -29,7 +29,7 @@
#include "../../inc/MarlinConfig.h"
#if SERIAL_PORT == -1
#if HAS_USB_SERIAL
#include "MarlinSerialUSB.h"
@ -283,8 +283,12 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
}
// Preinstantiate
MarlinSerialUSB customizedSerial1;
#endif // SERIAL_PORT == -1
#if SERIAL_PORT == -1
MarlinSerialUSB customizedSerial1;
#endif
#if SERIAL_PORT_2 == -1
MarlinSerialUSB customizedSerial2;
#endif
#endif // HAS_USB_SERIAL
#endif // ARDUINO_ARCH_SAM

12
Marlin/src/HAL/DUE/MarlinSerialUSB.h
View file

@ -28,7 +28,7 @@
#include "../../inc/MarlinConfig.h"
#if SERIAL_PORT == -1
#if HAS_USB_SERIAL
#include <WString.h>
@ -88,6 +88,12 @@ private:
static void printFloat(double, uint8_t);
};
extern MarlinSerialUSB customizedSerial1;
#if SERIAL_PORT == -1
extern MarlinSerialUSB customizedSerial1;
#endif
#endif // SERIAL_PORT == -1
#if SERIAL_PORT_2 == -1
extern MarlinSerialUSB customizedSerial2;
#endif
#endif // HAS_USB_SERIAL

4
Marlin/src/HAL/LPC1768/HAL.cpp
View file

@ -67,9 +67,7 @@ int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) {
return ind > -1 ? ind : dval;
}
void flashFirmware(int16_t value) {
NVIC_SystemReset();
}
void flashFirmware(const int16_t) { NVIC_SystemReset(); }
void HAL_clear_reset_source(void) {
#if ENABLED(USE_WATCHDOG)

2
Marlin/src/HAL/LPC1768/HAL.h
View file

@ -195,7 +195,7 @@ int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
void HAL_idletask();
#define PLATFORM_M997_SUPPORT
void flashFirmware(int16_t value);
void flashFirmware(const int16_t);
/**
* set_pwm_frequency

2
Marlin/src/HAL/STM32/HAL.cpp
View file

@ -133,6 +133,6 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) { HAL_adc_result = analogRe
uint16_t HAL_adc_get_result() { return HAL_adc_result; }
void flashFirmware(int16_t) { NVIC_SystemReset(); }
void flashFirmware(const int16_t) { NVIC_SystemReset(); }
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

2
Marlin/src/HAL/STM32/HAL.h
View file

@ -223,4 +223,4 @@ uint16_t HAL_adc_get_result();
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
#define PLATFORM_M997_SUPPORT
void flashFirmware(int16_t value);
void flashFirmware(const int16_t);

2
Marlin/src/HAL/STM32F1/HAL.cpp
View file

@ -388,6 +388,6 @@ void analogWrite(pin_t pin, int pwm_val8) {
analogWrite(uint8_t(pin), pwm_val8);
}
void flashFirmware(int16_t value) { nvic_sys_reset(); }
void flashFirmware(const int16_t) { nvic_sys_reset(); }
#endif // __STM32F1__

3
Marlin/src/HAL/STM32F1/HAL.h
View file

@ -160,6 +160,7 @@ void HAL_idletask();
#ifndef digitalPinHasPWM
#define digitalPinHasPWM(P) (PIN_MAP[P].timer_device != nullptr)
#define NO_COMPILE_TIME_PWM
#endif
#define CRITICAL_SECTION_START() uint32_t primask = __get_primask(); (void)__iCliRetVal()
@ -287,4 +288,4 @@ void analogWrite(pin_t pin, int pwm_val8); // PWM only! mul by 257 in maple!?
#define JTAGSWD_DISABLE() afio_cfg_debug_ports(AFIO_DEBUG_NONE)
#define PLATFORM_M997_SUPPORT
void flashFirmware(int16_t value);
void flashFirmware(const int16_t);

10
Marlin/src/MarlinCore.cpp
View file

@ -567,7 +567,7 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
#endif
#if ENABLED(USE_CONTROLLER_FAN)
controllerfan_update(); // Check if fan should be turned on to cool stepper drivers down
controllerFan.update(); // Check if fan should be turned on to cool stepper drivers down
#endif
#if ENABLED(AUTO_POWER_CONTROL)
@ -984,6 +984,10 @@ void setup() {
SETUP_RUN(leds.setup());
#endif
#if ENABLED(USE_CONTROLLER_FAN) // Set up fan controller to initialize also the default configurations.
SETUP_RUN(controllerFan.setup());
#endif
SETUP_RUN(ui.init());
SETUP_RUN(ui.reset_status()); // Load welcome message early. (Retained if no errors exist.)
@ -1047,10 +1051,6 @@ void setup() {
SETUP_RUN(endstops.enable_z_probe(false));
#endif
#if ENABLED(USE_CONTROLLER_FAN)
SET_OUTPUT(CONTROLLER_FAN_PIN);
#endif
#if HAS_STEPPER_RESET
SETUP_RUN(enableStepperDrivers());
#endif

1
Marlin/src/core/boards.h
View file

@ -103,6 +103,7 @@
#define BOARD_HJC2560C_REV2 1147 // ADIMLab Gantry v2
#define BOARD_TANGO 1148 // BIQU Tango V1
#define BOARD_MKS_GEN_L_V2 1149 // MKS GEN L V2
#define BOARD_COPYMASTER_3D 1150 // Copymaster 3D
//
// RAMBo and derivatives

4
Marlin/src/core/macros.h
View file

@ -21,6 +21,10 @@
*/
#pragma once
#if !defined(__has_include)
#define __has_include(...) 1
#endif
#define ABCE 4
#define XYZE 4
#define ABC 3

2
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View file

@ -1611,7 +1611,7 @@
* numbers for those locations should be 0.
*/
#ifdef VALIDATE_MESH_TILT
auto d_from = []() { DEBUG_ECHOPGM("D from "); };
auto d_from = []{ DEBUG_ECHOPGM("D from "); };
auto normed = [&](const xy_pos_t &pos, const float &zadd) {
return normal.x * pos.x + normal.y * pos.y + zadd;
};

94
Marlin/src/feature/controllerfan.cpp
View file

@ -24,60 +24,80 @@
#if ENABLED(USE_CONTROLLER_FAN)
#include "controllerfan.h"
#include "../module/stepper/indirection.h"
#include "../module/temperature.h"
uint8_t controllerfan_speed;
ControllerFan controllerFan;
void controllerfan_update() {
static millis_t lastMotorOn = 0, // Last time a motor was turned on
uint8_t ControllerFan::speed;
#if ENABLED(CONTROLLER_FAN_EDITABLE)
controllerFan_settings_t ControllerFan::settings; // {0}
#endif
void ControllerFan::setup() {
SET_OUTPUT(CONTROLLER_FAN_PIN);
init();
}
void ControllerFan::set_fan_speed(const uint8_t s) {
speed = s < (CONTROLLERFAN_SPEED_MIN) ? 0 : s; // Fan OFF below minimum
}
void ControllerFan::update() {
static millis_t lastMotorOn = 0, // Last time a motor was turned on
nextMotorCheck = 0; // Last time the state was checked
const millis_t ms = millis();
if (ELAPSED(ms, nextMotorCheck)) {
nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s
const bool xory = X_ENABLE_READ() == bool(X_ENABLE_ON) || Y_ENABLE_READ() == bool(Y_ENABLE_ON);
#define MOTOR_IS_ON(A,B) (A##_ENABLE_READ() == bool(B##_ENABLE_ON))
#define _OR_ENABLED_E(N) || MOTOR_IS_ON(E##N,E)
// If any of the drivers or the bed are enabled...
if (xory || Z_ENABLE_READ() == bool(Z_ENABLE_ON)
const bool motor_on = MOTOR_IS_ON(Z,Z)
#if HAS_Z2_ENABLE
|| MOTOR_IS_ON(Z2,Z)
#endif
#if HAS_Z3_ENABLE
|| MOTOR_IS_ON(Z3,Z)
#endif
#if HAS_Z4_ENABLE
|| MOTOR_IS_ON(Z4,Z)
#endif
|| (DISABLED(CONTROLLER_FAN_USE_Z_ONLY) && (
MOTOR_IS_ON(X,X) || MOTOR_IS_ON(Y,Y)
#if HAS_X2_ENABLE
|| MOTOR_IS_ON(X2,X)
#endif
#if HAS_Y2_ENABLE
|| MOTOR_IS_ON(Y2,Y)
#endif
#if E_STEPPERS
REPEAT(E_STEPPERS, _OR_ENABLED_E)
#endif
)
)
;
// If any of the drivers or the heated bed are enabled...
if (motor_on
#if HAS_HEATED_BED
|| thermalManager.temp_bed.soft_pwm_amount > 0
#endif
#if HAS_X2_ENABLE
|| X2_ENABLE_READ() == bool(X_ENABLE_ON)
#endif
#if HAS_Y2_ENABLE
|| Y2_ENABLE_READ() == bool(Y_ENABLE_ON)
#endif
#if HAS_Z2_ENABLE
|| Z2_ENABLE_READ() == bool(Z_ENABLE_ON)
#endif
#if HAS_Z3_ENABLE
|| Z3_ENABLE_READ() == bool(Z_ENABLE_ON)
#endif
#if HAS_Z4_ENABLE
|| Z4_ENABLE_READ() == bool(Z_ENABLE_ON)
#endif
#if E_STEPPERS
#define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == bool(E_ENABLE_ON)
REPEAT(E_STEPPERS, _OR_ENABLED_E)
#endif
) {
lastMotorOn = ms; //... set time to NOW so the fan will turn on
}
) lastMotorOn = ms; //... set time to NOW so the fan will turn on
// Fan off if no steppers have been enabled for CONTROLLERFAN_SECS seconds
controllerfan_speed = (!lastMotorOn || ELAPSED(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? 0 : (
#ifdef CONTROLLERFAN_SPEED_Z_ONLY
xory ? CONTROLLERFAN_SPEED : CONTROLLERFAN_SPEED_Z_ONLY
#else
CONTROLLERFAN_SPEED
#endif
// Fan Settings. Set fan > 0:
// - If AutoMode is on and steppers have been enabled for CONTROLLERFAN_IDLE_TIME seconds.
// - If System is on idle and idle fan speed settings is activated.
set_fan_speed(
settings.auto_mode && lastMotorOn && PENDING(ms, lastMotorOn + settings.duration * 1000UL)
? settings.active_speed : settings.idle_speed
);
// Allow digital or PWM fan output (see M42 handling)
WRITE(CONTROLLER_FAN_PIN, controllerfan_speed);
analogWrite(pin_t(CONTROLLER_FAN_PIN), controllerfan_speed);
WRITE(CONTROLLER_FAN_PIN, speed);
analogWrite(pin_t(CONTROLLER_FAN_PIN), speed);
}
}

54
Marlin/src/feature/controllerfan.h
View file

@ -21,4 +21,56 @@
*/
#pragma once
void controllerfan_update();
#include "../inc/MarlinConfigPre.h"
typedef struct {
uint8_t active_speed, // 0-255 (fullspeed); Speed with enabled stepper motors
idle_speed; // 0-255 (fullspeed); Speed after idle period with all motors are disabled
uint16_t duration; // Duration in seconds for the fan to run after all motors are disabled
bool auto_mode; // Default true
} controllerFan_settings_t;
#ifndef CONTROLLERFAN_SPEED_ACTIVE
#define CONTROLLERFAN_SPEED_ACTIVE 255
#endif
#ifndef CONTROLLERFAN_SPEED_IDLE
#define CONTROLLERFAN_SPEED_IDLE 0
#endif
#ifndef CONTROLLERFAN_IDLE_TIME
#define CONTROLLERFAN_IDLE_TIME 60
#endif
static constexpr controllerFan_settings_t controllerFan_defaults = {
CONTROLLERFAN_SPEED_ACTIVE,
CONTROLLERFAN_SPEED_IDLE,
CONTROLLERFAN_IDLE_TIME,
true
};
#if ENABLED(USE_CONTROLLER_FAN)
class ControllerFan {
private:
static uint8_t speed;
static void set_fan_speed(const uint8_t s);
public:
#if ENABLED(CONTROLLER_FAN_EDITABLE)
static controllerFan_settings_t settings;
#else
static const controllerFan_settings_t constexpr &settings = controllerFan_defaults;
#endif
static inline bool state() { return speed > 0; }
static inline void init() { reset(); }
static inline void reset() {
#if ENABLED(CONTROLLER_FAN_EDITABLE)
settings = controllerFan_defaults;
#endif
}
static void setup();
static void update();
};
extern ControllerFan controllerFan;
#endif

4
Marlin/src/feature/power.cpp
View file

@ -46,8 +46,8 @@ bool Power::is_power_needed() {
HOTEND_LOOP() if (thermalManager.autofan_speed[e]) return true;
#endif
#if ENABLED(AUTO_POWER_CONTROLLERFAN, USE_CONTROLLER_FAN) && HAS_CONTROLLER_FAN
if (controllerfan_speed) return true;
#if BOTH(USE_CONTROLLER_FAN, AUTO_POWER_CONTROLLERFAN)
if (controllerFan.state()) return true;
#endif
#if ENABLED(AUTO_POWER_CHAMBER_FAN)

2
Marlin/src/gcode/config/M43.cpp
View file

@ -67,6 +67,7 @@ inline void toggle_pins() {
else {
watchdog_refresh();
report_pin_state_extended(pin, ignore_protection, true, PSTR("Pulsing "));
const bool prior_mode = GET_PINMODE(pin);
#if AVR_AT90USB1286_FAMILY // Teensy IDEs don't know about these pins so must use FASTIO
if (pin == TEENSY_E2) {
SET_OUTPUT(TEENSY_E2);
@ -95,6 +96,7 @@ inline void toggle_pins() {
watchdog_refresh();
}
}
pinMode(pin, prior_mode);
}
SERIAL_EOL();
}

25
Marlin/src/gcode/control/M42.cpp
View file

@ -37,16 +37,33 @@
*
* S<byte> Pin status from 0 - 255
* I Flag to ignore Marlin's pin protection
*
* M<mode> Pin mode: 0=INPUT 1=OUTPUT 2=INPUT_PULLUP 3=INPUT_PULLDOWN
*/
void GcodeSuite::M42() {
if (!parser.seenval('S')) return;
const byte pin_status = parser.value_byte();
const int pin_index = PARSED_PIN_INDEX('P', GET_PIN_MAP_INDEX(LED_PIN));
if (pin_index < 0) return;
const pin_t pin = GET_PIN_MAP_PIN(pin_index);
if (!parser.boolval('I') && pin_is_protected(pin)) return protected_pin_err();
if (parser.seenval('M')) {
switch (parser.value_byte()) {
case 0: pinMode(pin, INPUT); break;
case 1: pinMode(pin, OUTPUT); break;
case 2: pinMode(pin, INPUT_PULLUP); break;
#ifdef INPUT_PULLDOWN
case 3: pinMode(pin, INPUT_PULLDOWN); break;
#endif
default: SERIAL_ECHOLNPGM("Invalid Pin Mode");
}
return;
}
if (!parser.seenval('S')) return;
const byte pin_status = parser.value_byte();
#if FAN_COUNT > 0
switch (pin) {
#if HAS_FAN0
@ -76,8 +93,6 @@ void GcodeSuite::M42() {
}
#endif
if (!parser.boolval('I') && pin_is_protected(pin)) return protected_pin_err();
pinMode(pin, OUTPUT);
extDigitalWrite(pin, pin_status);
analogWrite(pin, pin_status);

2
Marlin/src/gcode/feature/advance/M900.cpp
View file

@ -42,7 +42,7 @@
*/
void GcodeSuite::M900() {
auto echo_value_oor = [] (const char ltr, const bool ten=true) {
auto echo_value_oor = [](const char ltr, const bool ten=true) {
SERIAL_CHAR('?'); SERIAL_CHAR(ltr);
SERIAL_ECHOPGM(" value out of range");
if (ten) SERIAL_ECHOPGM(" (0-10)");

81
Marlin/src/gcode/feature/controllerfan/M710.cpp Normal file
View file

@ -0,0 +1,81 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../../inc/MarlinConfigPre.h"
#if ENABLED(CONTROLLER_FAN_EDITABLE)
#include "../../gcode.h"
#include "../../../feature/controllerfan.h"
void M710_report(const bool forReplay) {
if (!forReplay) { SERIAL_ECHOLNPGM("; Controller Fan"); SERIAL_ECHO_START(); }
SERIAL_ECHOLNPAIR("M710 "
"S", int(controllerFan.settings.active_speed),
"I", int(controllerFan.settings.idle_speed),
"A", int(controllerFan.settings.auto_mode),
"D", controllerFan.settings.duration,
" ; (", (int(controllerFan.settings.active_speed) * 100) / 255, "%"
" ", (int(controllerFan.settings.idle_speed) * 100) / 255, "%)"
);
}
/**
* M710: Set controller fan settings
*
* R : Reset to defaults
* S[0-255] : Fan speed when motors are active
* I[0-255] : Fan speed when motors are idle
* A[0|1] : Turn auto mode on or off
* D : Set auto mode idle duration
*
* Examples:
* M710 ; Report current Settings
* M710 R ; Reset SIAD to defaults
* M710 I64 ; Set controller fan Idle Speed to 25%
* M710 S255 ; Set controller fan Active Speed to 100%
* M710 S0 ; Set controller fan Active Speed to OFF
* M710 I255 A0 ; Set controller fan Idle Speed to 100% with Auto Mode OFF
* M710 I127 A1 S255 D160 ; Set controller fan idle speed 50%, AutoMode On, Fan speed 100%, duration to 160 Secs
*/
void GcodeSuite::M710() {
const bool seenR = parser.seen('R');
if (seenR) controllerFan.reset();
const bool seenS = parser.seenval('S');
if (seenS) controllerFan.settings.active_speed = parser.value_byte();
const bool seenI = parser.seenval('I');
if (seenI) controllerFan.settings.idle_speed = parser.value_byte();
const bool seenA = parser.seenval('A');
if (seenA) controllerFan.settings.auto_mode = parser.value_bool();
const bool seenD = parser.seenval('D');
if (seenD) controllerFan.settings.duration = parser.value_ushort();
if (!(seenR || seenS || seenI || seenA || seenD))
M710_report(false);
}
#endif // CONTROLLER_FAN_EDITABLE

4
Marlin/src/gcode/gcode.cpp
View file

@ -752,6 +752,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 702: M702(); break; // M702: Unload Filament
#endif
#if ENABLED(CONTROLLER_FAN_EDITABLE)
case 710: M710(); break; // M710: Set Controller Fan settings
#endif
#if ENABLED(GCODE_MACROS)
case 810: case 811: case 812: case 813: case 814:
case 815: case 816: case 817: case 818: case 819:

4
Marlin/src/gcode/gcode.h
View file

@ -972,6 +972,10 @@ private:
static void M7219();
#endif
#if ENABLED(CONTROLLER_FAN_EDITABLE)
static void M710();
#endif
static void T(const uint8_t tool_index);
};

4
Marlin/src/inc/Conditionals_LCD.h
View file

@ -683,6 +683,10 @@
#define SPI_SPEED SPI_FULL_SPEED
#endif
#if SERIAL_PORT == -1 || SERIAL_PORT_2 == -1
#define HAS_USB_SERIAL 1
#endif
/**
* This setting is also used by M109 when trying to calculate
* a ballpark safe margin to prevent wait-forever situation.

8
Marlin/src/inc/MarlinConfigPre.h
View file

@ -37,12 +37,8 @@
#include "../../Configuration.h"
#ifdef CUSTOM_VERSION_FILE
#if defined(__has_include)
#if __has_include(XSTR(../../CUSTOM_VERSION_FILE))
#include XSTR(../../CUSTOM_VERSION_FILE)
#endif
#else
#include XSTR(../../CUSTOM_VERSION_FILE)
#if __has_include(STRINGIFY(../../CUSTOM_VERSION_FILE))
#include STRINGIFY(../../CUSTOM_VERSION_FILE)
#endif
#endif

16
Marlin/src/inc/SanityCheck.h
View file

@ -270,6 +270,10 @@
#error "Replace SLED_PIN with SOL1_PIN (applies to both Z_PROBE_SLED and SOLENOID_PROBE)."
#elif defined(CONTROLLERFAN_PIN)
#error "CONTROLLERFAN_PIN is now CONTROLLER_FAN_PIN, enabled with USE_CONTROLLER_FAN. Please update your Configuration_adv.h."
#elif defined(CONTROLLERFAN_SPEED)
#error "CONTROLLERFAN_SPEED is now CONTROLLERFAN_SPEED_ACTIVE. Please update your Configuration_adv.h."
#elif defined(CONTROLLERFAN_SECS)
#error "CONTROLLERFAN_SECS is now CONTROLLERFAN_IDLE_TIME. Please update your Configuration_adv.h."
#elif defined(MIN_RETRACT)
#error "MIN_RETRACT is now MIN_AUTORETRACT and MAX_AUTORETRACT. Please update your Configuration_adv.h."
#elif defined(ADVANCE)
@ -1983,7 +1987,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/**
* Auto Fan check for PWM pins
*/
#if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255
#if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255 && DISABLED(NO_COMPILE_TIME_PWM)
#define AF_ERR_SUFF "_AUTO_FAN_PIN is not a PWM pin. Set EXTRUDER_AUTO_FAN_SPEED to 255."
#if HAS_AUTO_FAN_0
static_assert(PWM_PIN(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF);
@ -2649,14 +2653,14 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#endif
#if ENABLED(BACKLASH_COMPENSATION)
#if IS_CORE
#error "BACKLASH_COMPENSATION is incompatible with CORE kinematics."
#endif
#ifndef BACKLASH_DISTANCE_MM
#error "BACKLASH_COMPENSATION requires BACKLASH_DISTANCE_MM"
#endif
#ifndef BACKLASH_CORRECTION
#elif !defined(BACKLASH_CORRECTION)
#error "BACKLASH_COMPENSATION requires BACKLASH_CORRECTION"
#elif IS_CORE
constexpr float backlash_arr[] = BACKLASH_DISTANCE_MM;
static_assert(!backlash_arr[CORE_AXIS_1] && !backlash_arr[CORE_AXIS_2],
"BACKLASH_COMPENSATION can only apply to " STRINGIFY(NORMAL_AXIS) " with your CORE system.");
#endif
#endif

2
Marlin/src/inc/Version.h
View file

@ -42,7 +42,7 @@
* version was tagged.
*/
#ifndef STRING_DISTRIBUTION_DATE
#define STRING_DISTRIBUTION_DATE "2020-03-16"
#define STRING_DISTRIBUTION_DATE "2020-03-24"
#endif
/**

2
Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
View file

@ -118,7 +118,7 @@ static const uint8_t u8g_dev_uc1701_mini12864_HAL_init_seq[] PROGMEM = {
static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
U8G_ESC_ADR(0), // instruction mode
U8G_ESC_CS(1), // enable chip
#if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
#if ANY(MKS_MINI_12864, ENDER2_STOCKDISPLAY, FYSETC_MINI_12864)
UC1701_START_LINE(0), // set display start line to 0
UC1701_ADC_REVERSE(0), // ADC set to reverse
UC1701_OUT_MODE(1), // common output mode

10
Marlin/src/lcd/extui/lib/dgus/DGUSDisplay.cpp
View file

@ -30,10 +30,6 @@
#error "More than 2 hotends not implemented on the Display UI design."
#endif
#include "DGUSDisplay.h"
#include "DGUSVPVariable.h"
#include "DGUSDisplayDef.h"
#include "../../ui_api.h"
#include "../../../../MarlinCore.h"
@ -48,6 +44,10 @@
#include "../../../../feature/powerloss.h"
#endif
#include "DGUSDisplay.h"
#include "DGUSVPVariable.h"
#include "DGUSDisplayDef.h"
// Preamble... 2 Bytes, usually 0x5A 0xA5, but configurable
constexpr uint8_t DGUS_HEADER1 = 0x5A;
constexpr uint8_t DGUS_HEADER2 = 0xA5;
@ -855,7 +855,7 @@ void DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable
void DGUSScreenVariableHandler::HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleProbeOffsetZChanged");
const float offset = float(swap16(*(uint16_t*)val_ptr)) / 100.0f;
const float offset = float(int16_t(swap16(*(uint16_t*)val_ptr))) / 100.0f;
ExtUI::setZOffset_mm(offset);
ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
return;

10
Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.cpp
View file

@ -283,6 +283,13 @@ const uint16_t VPList_FLCPrinting[] PROGMEM = {
0x0000
};
const uint16_t VPList_Z_Offset[] PROGMEM = {
#if HOTENDS >= 1
VP_SD_Print_ProbeOffsetZ,
#endif
0x0000
};
const struct VPMapping VPMap[] PROGMEM = {
{ DGUSLCD_SCREEN_BOOT, VPList_Boot },
{ DGUSLCD_SCREEN_MAIN, VPList_Main },
@ -291,6 +298,7 @@ const struct VPMapping VPMap[] PROGMEM = {
{ DGUSLCD_SCREEN_STATUS2, VPList_Status2 },
{ DGUSLCD_SCREEN_PREHEAT, VPList_Preheat },
{ DGUSLCD_SCREEN_MANUALMOVE, VPList_ManualMove },
{ DGUSLCD_SCREEN_Z_OFFSET, VPList_Z_Offset },
{ DGUSLCD_SCREEN_MANUALEXTRUDE, VPList_ManualExtrude },
{ DGUSLCD_SCREEN_FILAMENT_HEATING, VPList_Filament_heating },
{ DGUSLCD_SCREEN_FILAMENT_LOADING, VPList_Filament_load_unload },
@ -361,7 +369,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
#if HOTENDS >= 1
VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>),
VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E0, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_EPos, &destination.e, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_MOVE_E0, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr),

1
Marlin/src/lcd/extui/lib/dgus/hiprecy/DGUSDisplayDef.h
View file

@ -35,6 +35,7 @@ enum DGUSLCD_Screens : uint8_t {
DGUSLCD_SCREEN_FILAMENT_LOADING = 76,
DGUSLCD_SCREEN_FILAMENT_UNLOADING = 82,
DGUSLCD_SCREEN_MANUALEXTRUDE = 84,
DGUSLCD_SCREEN_Z_OFFSET = 88,
DGUSLCD_SCREEN_SDFILELIST = 3,
DGUSLCD_SCREEN_SDPRINTMANIPULATION = 7,
DGUSLCD_SCREEN_SDPRINTTUNE = 9,

5
Marlin/src/lcd/language/language_de.h
View file

@ -236,6 +236,11 @@ namespace Language_de {
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Lüfter ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Geschw. Extralüfter");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Geschw. Extralüfter ~");
PROGMEM Language_Str MSG_CONTROLLER_FAN = _UxGT("Lüfter Kontroller");
PROGMEM Language_Str MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT("Lüfter Leerlauf");
PROGMEM Language_Str MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("Motorlast Modus");
PROGMEM Language_Str MSG_CONTROLLER_FAN_SPEED = _UxGT("Lüfter Motorlast");
PROGMEM Language_Str MSG_CONTROLLER_FAN_DURATION = _UxGT("Ausschalt Delay");
PROGMEM Language_Str MSG_FLOW = _UxGT("Flussrate");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flussrate ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Einstellungen");

5
Marlin/src/lcd/language/language_en.h
View file

@ -247,6 +247,11 @@ namespace Language_en {
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("Stored Fan ~");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Extra Fan Speed");
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra Fan Speed ~");
PROGMEM Language_Str MSG_CONTROLLER_FAN = _UxGT("Controller Fan");
PROGMEM Language_Str MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT("Idle Speed");
PROGMEM Language_Str MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("Auto Mode");
PROGMEM Language_Str MSG_CONTROLLER_FAN_SPEED = _UxGT("Active Speed");
PROGMEM Language_Str MSG_CONTROLLER_FAN_DURATION = _UxGT("Idle Period");
PROGMEM Language_Str MSG_FLOW = _UxGT("Flow");
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flow ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Control");

1
Marlin/src/lcd/language/language_tr.h
View file

@ -606,4 +606,3 @@ namespace Language_tr {
#define MSG_FIRST_FAN_SPEED MSG_FAN_SPEED_N
#define MSG_FIRST_EXTRA_FAN_SPEED MSG_EXTRA_FAN_SPEED_N
#endif

4
Marlin/src/lcd/menu/menu.cpp
View file

@ -193,7 +193,7 @@ DEFINE_MENU_EDIT_ITEM(uint16_3); // 123 right-justified
DEFINE_MENU_EDIT_ITEM(uint16_4); // 1234 right-justified
DEFINE_MENU_EDIT_ITEM(uint16_5); // 12345 right-justified
DEFINE_MENU_EDIT_ITEM(float3); // 123 right-justified
DEFINE_MENU_EDIT_ITEM(float52); // _2.34, 12.34, -2.34 or 123.45, -23.45
DEFINE_MENU_EDIT_ITEM(float42_52); // _2.34, 12.34, -2.34 or 123.45, -23.45
DEFINE_MENU_EDIT_ITEM(float43); // 1.234
DEFINE_MENU_EDIT_ITEM(float5); // 12345 right-justified
DEFINE_MENU_EDIT_ITEM(float5_25); // 12345 right-justified (25 increment)
@ -428,7 +428,7 @@ void scroll_screen(const uint8_t limit, const bool is_menu) {
MenuEditItemBase::draw_edit_screen(GET_TEXT(MSG_HOTEND_OFFSET_Z), ftostr54sign(hotend_offset[active_extruder].z));
#endif
if (do_probe) {
MenuEditItemBase::draw_edit_screen(GET_TEXT(MSG_ZPROBE_ZOFFSET), ftostr52sign(probe.offset.z));
MenuEditItemBase::draw_edit_screen(GET_TEXT(MSG_ZPROBE_ZOFFSET), BABYSTEP_TO_STR(probe.offset.z));
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY)
_lcd_zoffset_overlay_gfx(probe.offset.z);
#endif

22
Marlin/src/lcd/menu/menu.h
View file

@ -47,14 +47,18 @@ typedef void (*selectFunc_t)();
void _lcd_zoffset_overlay_gfx(const float zvalue);
#endif
#if Z_PROBE_OFFSET_RANGE_MIN >= -9 && Z_PROBE_OFFSET_RANGE_MAX <= 9
// Only values from -9.999 to 9.999
#define LCD_Z_OFFSET_FUNC(N) ftostr54sign(N)
#define LCD_Z_OFFSET_TYPE float43
#else
// Values from -99.99 to 99.99
#define LCD_Z_OFFSET_FUNC(N) ftostr52sign(N)
#define LCD_Z_OFFSET_TYPE float52
#if HAS_BED_PROBE
#if Z_PROBE_OFFSET_RANGE_MIN >= -9 && Z_PROBE_OFFSET_RANGE_MAX <= 9
#define LCD_Z_OFFSET_TYPE float43 // Values from -9.000 to +9.000
#else
#define LCD_Z_OFFSET_TYPE float42_52 // Values from -99.99 to 99.99
#endif
#endif
#if ENABLED(BABYSTEP_ZPROBE_OFFSET) && Z_PROBE_OFFSET_RANGE_MIN >= -9 && Z_PROBE_OFFSET_RANGE_MAX <= 9
#define BABYSTEP_TO_STR(N) ftostr43sign(N)
#elif ENABLED(BABYSTEPPING)
#define BABYSTEP_TO_STR(N) ftostr53sign(N)
#endif
////////////////////////////////////////////
@ -289,7 +293,7 @@ DEFINE_MENU_EDIT_ITEM_TYPE(uint16_3 ,uint16_t ,ui16tostr3rj , 1 );
DEFINE_MENU_EDIT_ITEM_TYPE(uint16_4 ,uint16_t ,ui16tostr4rj , 0.1f ); // 1234 right-justified
DEFINE_MENU_EDIT_ITEM_TYPE(uint16_5 ,uint16_t ,ui16tostr5rj , 0.01f ); // 12345 right-justified
DEFINE_MENU_EDIT_ITEM_TYPE(float3 ,float ,ftostr3 , 1 ); // 123 right-justified
DEFINE_MENU_EDIT_ITEM_TYPE(float52 ,float ,ftostr42_52 , 100 ); // _2.34, 12.34, -2.34 or 123.45, -23.45
DEFINE_MENU_EDIT_ITEM_TYPE(float42_52 ,float ,ftostr42_52 , 100 ); // _2.34, 12.34, -2.34 or 123.45, -23.45
DEFINE_MENU_EDIT_ITEM_TYPE(float43 ,float ,ftostr43sign ,1000 ); // -1.234, _1.234, +1.234
DEFINE_MENU_EDIT_ITEM_TYPE(float5 ,float ,ftostr5rj , 1 ); // 12345 right-justified
DEFINE_MENU_EDIT_ITEM_TYPE(float5_25 ,float ,ftostr5rj , 0.04f ); // 12345 right-justified (25 increment)

14
Marlin/src/lcd/menu/menu_advanced.cpp
View file

@ -112,10 +112,10 @@ void menu_cancelobject();
#if ENABLED(LIN_ADVANCE)
#if EXTRUDERS == 1
EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
#elif EXTRUDERS > 1
LOOP_L_N(n, EXTRUDERS)
EDIT_ITEM_N(float52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
EDIT_ITEM_N(float42_52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
#endif
#endif
@ -257,7 +257,7 @@ void menu_cancelobject();
EDIT_ITEM(bool, MSG_AUTOTEMP, &planner.autotemp_enabled);
EDIT_ITEM(float3, MSG_MIN, &planner.autotemp_min, 0, float(HEATER_0_MAXTEMP) - 15);
EDIT_ITEM(float3, MSG_MAX, &planner.autotemp_max, 0, float(HEATER_0_MAXTEMP) - 15);
EDIT_ITEM(float52, MSG_FACTOR, &planner.autotemp_factor, 0, 10);
EDIT_ITEM(float42_52, MSG_FACTOR, &planner.autotemp_factor, 0, 10);
#endif
//
@ -376,12 +376,12 @@ void menu_cancelobject();
START_MENU();
BACK_ITEM(MSG_ADVANCED_SETTINGS);
static float max_accel = _MAX(planner.settings.max_acceleration_mm_per_s2[A_AXIS], planner.settings.max_acceleration_mm_per_s2[B_AXIS], planner.settings.max_acceleration_mm_per_s2[C_AXIS]);
const float max_accel = _MAX(planner.settings.max_acceleration_mm_per_s2[A_AXIS], planner.settings.max_acceleration_mm_per_s2[B_AXIS], planner.settings.max_acceleration_mm_per_s2[C_AXIS]);
// M204 P Acceleration
EDIT_ITEM_FAST(float5_25, MSG_ACC, &planner.settings.acceleration, 25, max_accel);
// M204 R Retract Acceleration
EDIT_ITEM_FAST(float5, MSG_A_RETRACT, &planner.settings.retract_acceleration, 100, max_accel);
EDIT_ITEM_FAST(float5, MSG_A_RETRACT, &planner.settings.retract_acceleration, 100, planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(active_extruder)]);
// M204 T Travel Acceleration
EDIT_ITEM_FAST(float5_25, MSG_A_TRAVEL, &planner.settings.travel_acceleration, 25, max_accel);
@ -556,10 +556,10 @@ void menu_advanced_settings() {
SUBMENU(MSG_FILAMENT, menu_advanced_filament);
#elif ENABLED(LIN_ADVANCE)
#if EXTRUDERS == 1
EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
#elif EXTRUDERS > 1
LOOP_L_N(n, E_STEPPERS)
EDIT_ITEM_N(float52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
EDIT_ITEM_N(float42_52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
#endif
#endif

33
Marlin/src/lcd/menu/menu_configuration.cpp
View file

@ -138,12 +138,12 @@ void menu_advanced_settings();
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
#if ENABLED(DUAL_X_CARRIAGE)
EDIT_ITEM_FAST(float52, MSG_HOTEND_OFFSET_X, &hotend_offset[1].x, float(X2_HOME_POS - 25), float(X2_HOME_POS + 25), _recalc_offsets);
EDIT_ITEM_FAST(float42_52, MSG_HOTEND_OFFSET_X, &hotend_offset[1].x, float(X2_HOME_POS - 25), float(X2_HOME_POS + 25), _recalc_offsets);
#else
EDIT_ITEM_FAST(float52, MSG_HOTEND_OFFSET_X, &hotend_offset[1].x, -99.0, 99.0, _recalc_offsets);
EDIT_ITEM_FAST(float42_52, MSG_HOTEND_OFFSET_X, &hotend_offset[1].x, -99.0, 99.0, _recalc_offsets);
#endif
EDIT_ITEM_FAST(float52, MSG_HOTEND_OFFSET_Y, &hotend_offset[1].y, -99.0, 99.0, _recalc_offsets);
EDIT_ITEM_FAST(float52, MSG_HOTEND_OFFSET_Z, &hotend_offset[1].z, Z_PROBE_LOW_POINT, 10.0, _recalc_offsets);
EDIT_ITEM_FAST(float42_52, MSG_HOTEND_OFFSET_Y, &hotend_offset[1].y, -99.0, 99.0, _recalc_offsets);
EDIT_ITEM_FAST(float42_52, MSG_HOTEND_OFFSET_Z, &hotend_offset[1].z, Z_PROBE_LOW_POINT, 10.0, _recalc_offsets);
#if ENABLED(EEPROM_SETTINGS)
ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings);
#endif
@ -227,6 +227,24 @@ void menu_advanced_settings();
}
#endif
#if ENABLED(CONTROLLER_FAN_MENU)
#include "../../feature/controllerfan.h"
void menu_controller_fan() {
START_MENU();
BACK_ITEM(MSG_CONFIGURATION);
EDIT_ITEM_FAST(percent, MSG_CONTROLLER_FAN_IDLE_SPEED, &controllerFan.settings.idle_speed, _MAX(1, CONTROLLERFAN_SPEED_MIN) - 1, 255);
EDIT_ITEM(bool, MSG_CONTROLLER_FAN_AUTO_ON, &controllerFan.settings.auto_mode);
if (controllerFan.settings.auto_mode) {
EDIT_ITEM_FAST(percent, MSG_CONTROLLER_FAN_SPEED, &controllerFan.settings.active_speed, _MAX(1, CONTROLLERFAN_SPEED_MIN) - 1, 255);
EDIT_ITEM(uint16_4, MSG_CONTROLLER_FAN_DURATION, &controllerFan.settings.duration, 0, 4800);
}
END_MENU();
}
#endif
#if ENABLED(CASE_LIGHT_MENU)
#include "../../feature/caselight.h"
@ -320,6 +338,13 @@ void menu_configuration() {
EDIT_ITEM(LCD_Z_OFFSET_TYPE, MSG_ZPROBE_ZOFFSET, &probe.offset.z, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
#endif
//
// Set Fan Controller speed
//
#if ENABLED(CONTROLLER_FAN_MENU)
SUBMENU(MSG_CONTROLLER_FAN, menu_controller_fan);
#endif
const bool busy = printer_busy();
if (!busy) {
#if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION)

2
Marlin/src/lcd/menu/menu_delta_calibrate.cpp
View file

@ -103,7 +103,7 @@ void _man_probe_pt(const xy_pos_t &xy) {
#endif
void lcd_delta_settings() {
auto _recalc_delta_settings = []() {
auto _recalc_delta_settings = []{
#if HAS_LEVELING
reset_bed_level(); // After changing kinematics bed-level data is no longer valid
#endif

2
Marlin/src/lcd/menu/menu_mixer.cpp
View file

@ -182,7 +182,7 @@ void lcd_mixer_mix_edit() {
#if CHANNEL_MIX_EDITING
LOOP_S_LE_N(n, 1, MIXING_STEPPERS)
EDIT_ITEM_FAST_N(float52, n, MSG_MIX_COMPONENT_N, &mixer.collector[n-1], 0, 10);
EDIT_ITEM_FAST_N(float42_52, n, MSG_MIX_COMPONENT_N, &mixer.collector[n-1], 0, 10);
ACTION_ITEM(MSG_CYCLE_MIX, _lcd_mixer_cycle_mix);
ACTION_ITEM(MSG_COMMIT_VTOOL, _lcd_mixer_commit_vtool);

8
Marlin/src/lcd/menu/menu_tune.cpp
View file

@ -65,7 +65,7 @@
}
if (ui.should_draw()) {
const float spm = planner.steps_to_mm[axis];
MenuEditItemBase::draw_edit_screen(msg, LCD_Z_OFFSET_FUNC(spm * babystep.accum));
MenuEditItemBase::draw_edit_screen(msg, BABYSTEP_TO_STR(spm * babystep.accum));
#if ENABLED(BABYSTEP_DISPLAY_TOTAL)
const bool in_view = (true
#if HAS_GRAPHICAL_LCD
@ -81,7 +81,7 @@
#endif
lcd_put_u8str_P(GET_TEXT(MSG_BABYSTEP_TOTAL));
lcd_put_wchar(':');
lcd_put_u8str(LCD_Z_OFFSET_FUNC(spm * babystep.axis_total[BS_TOTAL_IND(axis)]));
lcd_put_u8str(BABYSTEP_TO_STR(spm * babystep.axis_total[BS_TOTAL_IND(axis)]));
}
#endif
}
@ -232,10 +232,10 @@ void menu_tune() {
//
#if ENABLED(LIN_ADVANCE) && DISABLED(SLIM_LCD_MENUS)
#if EXTRUDERS == 1
EDIT_ITEM(float52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
#elif EXTRUDERS > 1
LOOP_L_N(n, EXTRUDERS)
EDIT_ITEM_N(float52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
EDIT_ITEM_N(float42_52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
#endif
#endif

2
Marlin/src/lcd/ultralcd.cpp
View file

@ -227,7 +227,7 @@ millis_t MarlinUI::next_button_update_ms; // = 0
SETCURSOR(col, row);
if (!string) return;
auto _newline = [&col, &row]() {
auto _newline = [&col, &row]{
col = 0; row++; // Move col to string len (plus space)
SETCURSOR(0, row); // Simulate carriage return
};

25
Marlin/src/libs/numtostr.cpp
View file

@ -174,9 +174,9 @@ const char* ftostr12ns(const float &f) {
return &conv[3];
}
// Convert signed float to fixed-length string with 12.34 / -2.34 or 023.45 / -23.45 format
// Convert signed float to fixed-length string with 12.34 / _2.34 / -2.34 or -23.45 / 123.45 format
const char* ftostr42_52(const float &f) {
if (f <= -10 || f >= 100) return ftostr52(f); // need more digits
if (f <= -10 || f >= 100) return ftostr52(f); // -23.45 / 123.45
long i = (f * 1000 + (f < 0 ? -5: 5)) / 10;
conv[2] = (f >= 0 && f < 10) ? ' ' : MINUSOR(i, DIGIMOD(i, 1000));
conv[3] = DIGIMOD(i, 100);
@ -198,9 +198,9 @@ const char* ftostr52(const float &f) {
return &conv[1];
}
// Convert signed float to fixed-length string with 12.345 / -2.345 or 023.456 / -23.456 format
const char* ftostr43_53(const float &f) {
if (f <= -10 || f >= 100) return ftostr53(f); // need more digits
// Convert signed float to fixed-length string with 12.345 / _2.345 / -2.345 or -23.45 / 123.45 format
const char* ftostr53_63(const float &f) {
if (f <= -10 || f >= 100) return ftostr63(f); // -23.456 / 123.456
long i = (f * 10000 + (f < 0 ? -5: 5)) / 10;
conv[1] = (f >= 0 && f < 10) ? ' ' : MINUSOR(i, DIGIMOD(i, 10000));
conv[2] = DIGIMOD(i, 1000);
@ -212,7 +212,7 @@ const char* ftostr43_53(const float &f) {
}
// Convert signed float to fixed-length string with 023.456 / -23.456 format
const char* ftostr53(const float &f) {
const char* ftostr63(const float &f) {
long i = (f * 10000 + (f < 0 ? -5: 5)) / 10;
conv[0] = MINUSOR(i, DIGIMOD(i, 100000));
conv[1] = DIGIMOD(i, 10000);
@ -310,6 +310,19 @@ const char* ftostr52sign(const float &f) {
return conv;
}
// Convert signed float to string with +12.345 format
const char* ftostr53sign(const float &f) {
long i = (f * 1000 + (f < 0 ? -5: 5)) / 10;
conv[0] = MINUSOR(i, '+');
conv[1] = DIGIMOD(i, 10000);
conv[2] = DIGIMOD(i, 1000);
conv[3] = '.';
conv[4] = DIGIMOD(i, 100);
conv[5] = DIGIMOD(i, 10);
conv[6] = DIGIMOD(i, 1);
return conv;
}
// Convert unsigned float to string with ____4.5, __34.5, _234.5, 1234.5 format
const char* ftostr51rj(const float &f) {
const long i = ((f < 0 ? -f : f) * 100 + 5) / 10;

9
Marlin/src/libs/numtostr.h
View file

@ -58,17 +58,17 @@ const char* i16tostr4signrj(const int16_t x);
// Convert unsigned float to string with 1.23 format
const char* ftostr12ns(const float &x);
// Convert signed float to fixed-length string with 12.34 / -2.34 or 023.45 / -23.45 format
// Convert signed float to fixed-length string with 12.34 / _2.34 / -2.34 or -23.45 / 123.45 format
const char* ftostr42_52(const float &x);
// Convert signed float to fixed-length string with 023.45 / -23.45 format
const char* ftostr52(const float &x);
// Convert signed float to fixed-length string with 12.345 / -2.345 or 023.456 / -23.456 format
const char* ftostr43_53(const float &x);
const char* ftostr53_63(const float &x);
// Convert signed float to fixed-length string with 023.456 / -23.456 format
const char* ftostr53(const float &x);
const char* ftostr63(const float &x);
// Convert float to fixed-length string with +123.4 / -123.4 format
const char* ftostr41sign(const float &x);
@ -91,6 +91,9 @@ const char* ftostr52sp(const float &x);
// Convert signed float to string with +123.45 format
const char* ftostr52sign(const float &x);
// Convert signed float to string with +12.345 format
const char* ftostr53sign(const float &f);
// Convert unsigned float to string with 1234.5 format omitting trailing zeros
const char* ftostr51rj(const float &x);

47
Marlin/src/module/configuration_store.cpp
View file

@ -122,6 +122,11 @@
#include "../feature/probe_temp_comp.h"
#endif
#include "../feature/controllerfan.h"
#if ENABLED(CONTROLLER_FAN_EDITABLE)
void M710_report(const bool forReplay);
#endif
#pragma pack(push, 1) // No padding between variables
typedef struct { uint16_t X, Y, Z, X2, Y2, Z2, Z3, Z4, E0, E1, E2, E3, E4, E5; } tmc_stepper_current_t;
@ -292,6 +297,11 @@ typedef struct SettingsDataStruct {
//
int16_t lcd_contrast; // M250 C
//
// Controller fan settings
//
controllerFan_settings_t controllerFan_settings; // M710
//
// POWER_LOSS_RECOVERY
//
@ -880,6 +890,19 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(lcd_contrast);
}
//
// Controller Fan
//
{
_FIELD_TEST(controllerFan_settings);
#if ENABLED(USE_CONTROLLER_FAN)
const controllerFan_settings_t &cfs = controllerFan.settings;
#else
controllerFan_settings_t cfs = controllerFan_defaults;
#endif
EEPROM_WRITE(cfs);
}
//
// Power-Loss Recovery
//
@ -1719,6 +1742,19 @@ void MarlinSettings::postprocess() {
#endif
}
//
// Controller Fan
//
{
_FIELD_TEST(controllerFan_settings);
#if ENABLED(CONTROLLER_FAN_EDITABLE)
const controllerFan_settings_t &cfs = controllerFan.settings;
#else
controllerFan_settings_t cfs = { 0 };
#endif
EEPROM_READ(cfs);
}
//
// Power-Loss Recovery
//
@ -2590,6 +2626,13 @@ void MarlinSettings::reset() {
ui.set_contrast(DEFAULT_LCD_CONTRAST);
#endif
//
// Controller Fan
//
#if ENABLED(USE_CONTROLLER_FAN)
controllerFan.reset();
#endif
//
// Power-Loss Recovery
//
@ -3154,6 +3197,10 @@ void MarlinSettings::reset() {
SERIAL_ECHOLNPAIR(" M250 C", ui.contrast);
#endif
#if ENABLED(CONTROLLER_FAN_EDITABLE)
M710_report(forReplay);
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
CONFIG_ECHO_HEADING("Power-Loss Recovery:");
CONFIG_ECHO_START();

14
Marlin/src/module/motion.cpp
View file

@ -218,7 +218,6 @@ inline void report_more_positions() {
inline void report_logical_position(const xyze_pos_t &rpos) {
const xyze_pos_t lpos = rpos.asLogical();
SERIAL_ECHOPAIR_P(X_LBL, lpos.x, SP_Y_LBL, lpos.y, SP_Z_LBL, lpos.z, SP_E_LBL, lpos.e);
report_more_positions();
}
// Report the real current position according to the steppers.
@ -237,10 +236,14 @@ void report_real_position() {
#endif
report_logical_position(npos);
report_more_positions();
}
// Report the logical current position according to the most recent G-code command
void report_current_position() { report_logical_position(current_position); }
void report_current_position() {
report_logical_position(current_position);
report_more_positions();
}
/**
* Report the logical current position according to the most recent G-code command.
@ -1776,6 +1779,13 @@ void homeaxis(const AxisEnum axis) {
#endif
homing_feedrate(axis)
);
#if ENABLED(SENSORLESS_HOMING)
planner.synchronize();
#if IS_CORE
if (axis != NORMAL_AXIS) safe_delay(200); // Short delay to allow belts to spring back
#endif
#endif
}
#endif

69
Marlin/src/module/thermistor/thermistor_202.h Normal file
View file

@ -0,0 +1,69 @@
//
// Unknown 200K thermistor on a Copymaster 3D hotend
// Temptable sent from dealer technologyoutlet.co.uk
//
const short temptable_202[][2] PROGMEM = {
{ OV( 1), 864 },
{ OV( 35), 300 },
{ OV( 38), 295 },
{ OV( 41), 290 },
{ OV( 44), 285 },
{ OV( 47), 280 },
{ OV( 51), 275 },
{ OV( 55), 270 },
{ OV( 60), 265 },
{ OV( 65), 260 },
{ OV( 70), 255 },
{ OV( 76), 250 },
{ OV( 83), 245 },
{ OV( 90), 240 },
{ OV( 98), 235 },
{ OV( 107), 230 },
{ OV( 116), 225 },
{ OV( 127), 220 },
{ OV( 138), 215 },
{ OV( 151), 210 },
{ OV( 164), 205 },
{ OV( 179), 200 },
{ OV( 195), 195 },
{ OV( 213), 190 },
{ OV( 232), 185 },
{ OV( 253), 180 },
{ OV( 275), 175 },
{ OV( 299), 170 },
{ OV( 325), 165 },
{ OV( 352), 160 },
{ OV( 381), 155 },
{ OV( 411), 150 },
{ OV( 443), 145 },
{ OV( 476), 140 },
{ OV( 511), 135 },
{ OV( 546), 130 },
{ OV( 581), 125 },
{ OV( 617), 120 },
{ OV( 652), 115 },
{ OV( 687), 110 },
{ OV( 720), 105 },
{ OV( 753), 100 },
{ OV( 783), 95 },
{ OV( 812), 90 },
{ OV( 839), 85 },
{ OV( 864), 80 },
{ OV( 886), 75 },
{ OV( 906), 70 },
{ OV( 924), 65 },
{ OV( 940), 60 },
{ OV( 954), 55 },
{ OV( 966), 50 },
{ OV( 976), 45 },
{ OV( 985), 40 },
{ OV( 992), 35 },
{ OV( 998), 30 },
{ OV(1003), 25 },
{ OV(1007), 20 },
{ OV(1011), 15 },
{ OV(1014), 10 },
{ OV(1016), 5 },
{ OV(1018), 0 }
};

3
Marlin/src/module/thermistor/thermistors.h
View file

@ -151,6 +151,9 @@
#if ANY_THERMISTOR_IS(201) // Pt100 with LMV324 Overlord
#include "thermistor_201.h"
#endif
#if ANY_THERMISTOR_IS(202) // 200K thermistor in Copymaker3D hotend
#include "thermistor_202.h"
#endif
#if ANY_THERMISTOR_IS(331) // Like table 1, but with 3V3 as input voltage for MEGA
#include "thermistor_331.h"
#endif

56
Marlin/src/pins/esp32/pins_E4D.h
View file

@ -42,49 +42,49 @@
//
// Limit Switches
//
#define X_MIN_PIN 34
#define Y_MIN_PIN 35
#define Z_MIN_PIN 16 // 15
#define X_MIN_PIN 34
#define Y_MIN_PIN 35
#define Z_MIN_PIN 16 // 15
//
// Steppers
//
#define X_STEP_PIN 12 // 34//27
#define X_DIR_PIN 13 // 35//26
#define X_ENABLE_PIN 17 // 0//17//25 // used free pin
//#define X_CS_PIN 0
#define X_STEP_PIN 12 // 34//27
#define X_DIR_PIN 13 // 35//26
#define X_ENABLE_PIN 17 // 0//17//25 // used free pin
//#define X_CS_PIN 0
#define Y_STEP_PIN 32 // 33
#define Y_DIR_PIN 33 // 32
#define Y_ENABLE_PIN X_ENABLE_PIN
//#define Y_CS_PIN 13
#define Y_STEP_PIN 32 // 33
#define Y_DIR_PIN 33 // 32
#define Y_ENABLE_PIN X_ENABLE_PIN
//#define Y_CS_PIN 13
#define Z_STEP_PIN 25 // 14
#define Z_DIR_PIN 26 // 12
#define Z_ENABLE_PIN X_ENABLE_PIN
//#define Z_CS_PIN 5 // SS_PIN
#define Z_STEP_PIN 25 // 14
#define Z_DIR_PIN 26 // 12
#define Z_ENABLE_PIN X_ENABLE_PIN
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 27 // 16
#define E0_DIR_PIN 14 // 17
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define E0_CS_PIN 21
#define E0_STEP_PIN 27 // 16
#define E0_DIR_PIN 14 // 17
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define E0_CS_PIN 21
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 2 // 4//2//(D8)
#define FAN_PIN 0 // 2//15//13 (D9)
#define HEATER_BED_PIN 15 // 15//0 //(D10)
#define HEATER_0_PIN 2 // 4//2//(D8)
#define FAN_PIN 0 // 2//15//13 (D9)
#define HEATER_BED_PIN 15 // 15//0 //(D10)
// SPI
#define SDSS 5
#define SDSS 5
#define I2S_STEPPER_STREAM
#define I2S_WS 23
#define I2S_BCK 22
#define I2S_DATA 21
#define I2S_WS 23
#define I2S_BCK 22
#define I2S_DATA 21

56
Marlin/src/pins/esp32/pins_ESP32.h
View file

@ -35,52 +35,52 @@
// I2S (steppers & other output-only pins)
//
#define I2S_STEPPER_STREAM
#define I2S_WS 25
#define I2S_BCK 26
#define I2S_DATA 27
#define I2S_WS 25
#define I2S_BCK 26
#define I2S_DATA 27
//
// Limit Switches
//
#define X_MIN_PIN 34
#define Y_MIN_PIN 35
#define Z_MIN_PIN 15
#define X_MIN_PIN 34
#define Y_MIN_PIN 35
#define Z_MIN_PIN 15
//
// Steppers
//
#define X_STEP_PIN 128
#define X_DIR_PIN 129
#define X_ENABLE_PIN 130
//#define X_CS_PIN 0
#define X_STEP_PIN 128
#define X_DIR_PIN 129
#define X_ENABLE_PIN 130
//#define X_CS_PIN 0
#define Y_STEP_PIN 131
#define Y_DIR_PIN 132
#define Y_ENABLE_PIN 133
//#define Y_CS_PIN 13
#define Y_STEP_PIN 131
#define Y_DIR_PIN 132
#define Y_ENABLE_PIN 133
//#define Y_CS_PIN 13
#define Z_STEP_PIN 134
#define Z_DIR_PIN 135
#define Z_ENABLE_PIN 136
//#define Z_CS_PIN 5 // SS_PIN
#define Z_STEP_PIN 134
#define Z_DIR_PIN 135
#define Z_ENABLE_PIN 136
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 137
#define E0_DIR_PIN 138
#define E0_ENABLE_PIN 139
//#define E0_CS_PIN 21
#define E0_STEP_PIN 137
#define E0_DIR_PIN 138
#define E0_ENABLE_PIN 139
//#define E0_CS_PIN 21
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define FAN_PIN 13
#define HEATER_BED_PIN 4
#define HEATER_0_PIN 2
#define FAN_PIN 13
#define HEATER_BED_PIN 4
// SPI
#define SDSS 5
#define SDSS 5

68
Marlin/src/pins/esp32/pins_MRR_ESPA.h
View file

@ -45,66 +45,66 @@
#ifdef I2S_STEPPER_STREAM
#undef I2S_STEPPER_STREAM
#endif
#define I2S_WS -1
#define I2S_BCK -1
#define I2S_DATA -1
#define I2S_WS -1
#define I2S_BCK -1
#define I2S_DATA -1
//
// Limit Switches
//
#define X_STOP_PIN 34
#define Y_STOP_PIN 35
#define Z_STOP_PIN 15
#define X_STOP_PIN 34
#define Y_STOP_PIN 35
#define Z_STOP_PIN 15
//
// Steppers
//
#define X_STEP_PIN 27
#define X_DIR_PIN 26
#define X_ENABLE_PIN 25
//#define X_CS_PIN 21
#define X_STEP_PIN 27
#define X_DIR_PIN 26
#define X_ENABLE_PIN 25
//#define X_CS_PIN 21
#define Y_STEP_PIN 33
#define Y_DIR_PIN 32
#define Y_ENABLE_PIN X_ENABLE_PIN
//#define Y_CS_PIN 22
#define Y_STEP_PIN 33
#define Y_DIR_PIN 32
#define Y_ENABLE_PIN X_ENABLE_PIN
//#define Y_CS_PIN 22
#define Z_STEP_PIN 14
#define Z_DIR_PIN 12
#define Z_ENABLE_PIN X_ENABLE_PIN
//#define Z_CS_PIN 5 // SS_PIN
#define Z_STEP_PIN 14
#define Z_DIR_PIN 12
#define Z_ENABLE_PIN X_ENABLE_PIN
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 16
#define E0_DIR_PIN 17
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define E0_CS_PIN 21
#define E0_STEP_PIN 16
#define E0_DIR_PIN 17
#define E0_ENABLE_PIN X_ENABLE_PIN
//#define E0_CS_PIN 21
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define FAN_PIN 13
#define HEATER_BED_PIN 4
#define HEATER_0_PIN 2
#define FAN_PIN 13
#define HEATER_BED_PIN 4
//
// MicroSD card
//
#define MOSI_PIN 23
#define MISO_PIN 19
#define SCK_PIN 18
#define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
#define MOSI_PIN 23
#define MISO_PIN 19
#define SCK_PIN 18
#define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
// Hardware serial pins
// Add the following to Configuration.h or Configuration_adv.h to assign
// specific pins to hardware Serial1.
// Note: Serial2 can be defined using HARDWARE_SERIAL2_RX and HARDWARE_SERIAL2_TX but
// MRR ESPA does not have enough spare pins for such reassignment.
//#define HARDWARE_SERIAL1_RX 21
//#define HARDWARE_SERIAL1_TX 22
//#define HARDWARE_SERIAL1_RX 21
//#define HARDWARE_SERIAL1_TX 22

122
Marlin/src/pins/esp32/pins_MRR_ESPE.h
View file

@ -43,9 +43,9 @@
//
// Limit Switches
//
#define X_STOP_PIN 35
#define Y_STOP_PIN 32
#define Z_STOP_PIN 33
#define X_STOP_PIN 35
#define Y_STOP_PIN 32
#define Z_STOP_PIN 33
//
// Enable I2S stepper stream
@ -53,72 +53,72 @@
#undef I2S_STEPPER_STREAM
#define I2S_STEPPER_STREAM
#undef LIN_ADVANCE // Currently, I2S stream does not work with linear advance
#undef LIN_ADVANCE // Currently, I2S stream does not work with linear advance
#define I2S_WS 26
#define I2S_BCK 25
#define I2S_DATA 27
#define I2S_WS 26
#define I2S_BCK 25
#define I2S_DATA 27
//
// Steppers
//
#define X_STEP_PIN 129
#define X_DIR_PIN 130
#define X_ENABLE_PIN 128
//#define X_CS_PIN 21
#define X_STEP_PIN 129
#define X_DIR_PIN 130
#define X_ENABLE_PIN 128
//#define X_CS_PIN 21
#define Y_STEP_PIN 132
#define Y_DIR_PIN 133
#define Y_ENABLE_PIN 131
//#define Y_CS_PIN 22
#define Y_STEP_PIN 132
#define Y_DIR_PIN 133
#define Y_ENABLE_PIN 131
//#define Y_CS_PIN 22
#define Z_STEP_PIN 135
#define Z_DIR_PIN 136
#define Z_ENABLE_PIN 134
//#define Z_CS_PIN 5 // SS_PIN
#define Z_STEP_PIN 135
#define Z_DIR_PIN 136
#define Z_ENABLE_PIN 134
//#define Z_CS_PIN 5 // SS_PIN
#define E0_STEP_PIN 138
#define E0_DIR_PIN 139
#define E0_ENABLE_PIN 137
//#define E0_CS_PIN 21
#define E0_STEP_PIN 138
#define E0_DIR_PIN 139
#define E0_ENABLE_PIN 137
//#define E0_CS_PIN 21
#define E1_STEP_PIN 141
#define E1_DIR_PIN 142
#define E1_ENABLE_PIN 140
//#define E1_CS_PIN 22
#define E1_STEP_PIN 141
#define E1_DIR_PIN 142
#define E1_ENABLE_PIN 140
//#define E1_CS_PIN 22
#define Z2_STEP_PIN 141
#define Z2_DIR_PIN 142
#define Z2_ENABLE_PIN 140
//#define Z2_CS_PIN 5
#define Z2_STEP_PIN 141
#define Z2_DIR_PIN 142
#define Z2_ENABLE_PIN 140
//#define Z2_CS_PIN 5
//
// Temperature Sensors
//
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_1_PIN 34 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
#define TEMP_0_PIN 36 // Analog Input
#define TEMP_1_PIN 34 // Analog Input
#define TEMP_BED_PIN 39 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 145 // 2
#define FAN_PIN 146 // 15
#define HEATER_BED_PIN 144 // 4
#define HEATER_0_PIN 145 // 2
#define FAN_PIN 146 // 15
#define HEATER_BED_PIN 144 // 4
#define CONTROLLER_FAN_PIN 147
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
#define FAN1_PIN 149
#define CONTROLLER_FAN_PIN 147
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
#define FAN1_PIN 149
//
// MicroSD card
//
#define MOSI_PIN 23
#define MISO_PIN 19
#define SCK_PIN 18
#define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
#define MOSI_PIN 23
#define MISO_PIN 19
#define SCK_PIN 18
#define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
//////////////////////////
// LCDs and Controllers //
@ -126,21 +126,21 @@
#if HAS_GRAPHICAL_LCD
#define LCD_PINS_RS 13
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16
#define LCD_PINS_RS 13
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16
#if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN 151
#define BEEPER_PIN 151
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 151
#define BEEPER_PIN 151
//#define LCD_PINS_D5 150
//#define LCD_PINS_D6 152
//#define LCD_PINS_D7 153
//#define LCD_PINS_D5 150
//#define LCD_PINS_D6 152
//#define LCD_PINS_D7 153
#else
@ -148,9 +148,9 @@
#endif
#define BTN_EN1 0
#define BTN_EN2 12
#define BTN_ENC 14
#define BTN_EN1 0
#define BTN_EN2 12
#define BTN_ENC 14
#endif // HAS_GRAPHICAL_LCD
@ -159,7 +159,7 @@
// specific pins to hardware Serial1 and Serial2.
// Note: Serial2 can be defined using HARDWARE_SERIAL2_RX and HARDWARE_SERIAL2_TX but
// MRR ESPA does not have enough spare pins for such reassignment.
//#define HARDWARE_SERIAL1_RX 21
//#define HARDWARE_SERIAL1_TX 22
//#define HARDWARE_SERIAL2_RX 2
//#define HARDWARE_SERIAL2_TX 4
//#define HARDWARE_SERIAL1_RX 21
//#define HARDWARE_SERIAL1_TX 22
//#define HARDWARE_SERIAL2_RX 2
//#define HARDWARE_SERIAL2_TX 4

456
Marlin/src/pins/linux/pins_RAMPS_LINUX.h
View file

@ -49,7 +49,7 @@
#define BOARD_INFO_NAME "RAMPS 1.4"
#endif
#define E2END 0xFFF // 4KB
#define E2END 0xFFF // 4KB
#define IS_RAMPS_EFB
@ -57,85 +57,85 @@
// Servos
//
#ifdef IS_RAMPS_13
#define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
#define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
#else
#define SERVO0_PIN 11
#define SERVO0_PIN 11
#endif
#define SERVO1_PIN 6
#define SERVO2_PIN 5
#define SERVO1_PIN 6
#define SERVO2_PIN 5
#ifndef SERVO3_PIN
#define SERVO3_PIN 4
#define SERVO3_PIN 4
#endif
//
// Limit Switches
//
#define X_MIN_PIN 3
#define X_MIN_PIN 3
#ifndef X_MAX_PIN
#define X_MAX_PIN 2
#define X_MAX_PIN 2
#endif
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#define Z_MIN_PROBE_PIN 32
#endif
//
// Steppers
//
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#ifndef X_CS_PIN
#define X_CS_PIN 53
#define X_CS_PIN 53
#endif
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#ifndef Y_CS_PIN
#define Y_CS_PIN 49
#define Y_CS_PIN 49
#endif
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#ifndef Z_CS_PIN
#define Z_CS_PIN 40
#define Z_CS_PIN 40
#endif
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#ifndef E0_CS_PIN
#define E0_CS_PIN 42
#define E0_CS_PIN 42
#endif
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#ifndef E1_CS_PIN
#define E1_CS_PIN 44
#define E1_CS_PIN 44
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 1 // Analog Input
#define TEMP_BED_PIN 2 // Analog Input
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 1 // Analog Input
#define TEMP_BED_PIN 2 // Analog Input
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card
#define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card
#else
#define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN)
#define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN)
#endif
//
@ -159,72 +159,72 @@
// Heaters / Fans
//
#ifndef MOSFET_D_PIN
#define MOSFET_D_PIN -1
#define MOSFET_D_PIN -1
#endif
#ifndef RAMPS_D8_PIN
#define RAMPS_D8_PIN 8
#define RAMPS_D8_PIN 8
#endif
#ifndef RAMPS_D9_PIN
#define RAMPS_D9_PIN 9
#define RAMPS_D9_PIN 9
#endif
#ifndef RAMPS_D10_PIN
#define RAMPS_D10_PIN 10
#define RAMPS_D10_PIN 10
#endif
#define HEATER_0_PIN RAMPS_D10_PIN
#define HEATER_0_PIN RAMPS_D10_PIN
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define FAN_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN RAMPS_D9_PIN
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#define FAN1_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define FAN_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN RAMPS_D9_PIN
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#define FAN1_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#if HOTENDS == 1
#define FAN1_PIN MOSFET_D_PIN
#define FAN1_PIN MOSFET_D_PIN
#else
#define HEATER_1_PIN MOSFET_D_PIN
#define HEATER_1_PIN MOSFET_D_PIN
#endif
#endif
#ifndef FAN_PIN
#define FAN_PIN 4 // IO pin. Buffer needed
#define FAN_PIN 4 // IO pin. Buffer needed
#endif
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define SDSS 53
#define LED_PIN 13
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 5 // Analog Input on AUX2
#define FILWIDTH_PIN 5 // Analog Input on AUX2
#endif
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 4
#define FIL_RUNOUT_PIN 4
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN 12
#define PS_ON_PIN 12
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // Prefer the servo connector
#define CASE_LIGHT_PIN 6 // Hardware PWM
#elif HAS_FREE_AUX2_PINS // try to use AUX 2
#define CASE_LIGHT_PIN 44 // Hardware PWM
#if NUM_SERVOS <= 1 // Prefer the servo connector
#define CASE_LIGHT_PIN 6 // Hardware PWM
#elif HAS_FREE_AUX2_PINS // try to use AUX 2
#define CASE_LIGHT_PIN 44 // Hardware PWM
#endif
#endif
@ -232,14 +232,14 @@
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5
#elif HAS_FREE_AUX2_PINS // try to use AUX 2
#define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5
#elif HAS_FREE_AUX2_PINS // try to use AUX 2
#define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65
#endif
#endif
@ -247,13 +247,13 @@
// Průša i3 MK2 Multiplexer Support
//
#ifndef E_MUX0_PIN
#define E_MUX0_PIN 40 // Z_CS_PIN
#define E_MUX0_PIN 40 // Z_CS_PIN
#endif
#ifndef E_MUX1_PIN
#define E_MUX1_PIN 42 // E0_CS_PIN
#define E_MUX1_PIN 42 // E0_CS_PIN
#endif
#ifndef E_MUX2_PIN
#define E_MUX2_PIN 44 // E1_CS_PIN
#define E_MUX2_PIN 44 // E1_CS_PIN
#endif
/**
@ -261,17 +261,17 @@
*/
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI 66
#define TMC_SW_MOSI 66
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO 44
#define TMC_SW_MISO 44
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK 64
#define TMC_SW_SCK 64
#endif
#endif
#if HAS_TMC220x
#if HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
*
@ -295,91 +295,91 @@
*/
#ifndef X_SERIAL_TX_PIN
#define X_SERIAL_TX_PIN 40
#define X_SERIAL_TX_PIN 40
#endif
#ifndef X_SERIAL_RX_PIN
#define X_SERIAL_RX_PIN 63
#define X_SERIAL_RX_PIN 63
#endif
#ifndef X2_SERIAL_TX_PIN
#define X2_SERIAL_TX_PIN -1
#define X2_SERIAL_TX_PIN -1
#endif
#ifndef X2_SERIAL_RX_PIN
#define X2_SERIAL_RX_PIN -1
#define X2_SERIAL_RX_PIN -1
#endif
#ifndef Y_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN 59
#define Y_SERIAL_TX_PIN 59
#endif
#ifndef Y_SERIAL_RX_PIN
#define Y_SERIAL_RX_PIN 64
#define Y_SERIAL_RX_PIN 64
#endif
#ifndef Y2_SERIAL_TX_PIN
#define Y2_SERIAL_TX_PIN -1
#define Y2_SERIAL_TX_PIN -1
#endif
#ifndef Y2_SERIAL_RX_PIN
#define Y2_SERIAL_RX_PIN -1
#define Y2_SERIAL_RX_PIN -1
#endif
#ifndef Z_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN 42
#define Z_SERIAL_TX_PIN 42
#endif
#ifndef Z_SERIAL_RX_PIN
#define Z_SERIAL_RX_PIN 65
#define Z_SERIAL_RX_PIN 65
#endif
#ifndef Z2_SERIAL_TX_PIN
#define Z2_SERIAL_TX_PIN -1
#define Z2_SERIAL_TX_PIN -1
#endif
#ifndef Z2_SERIAL_RX_PIN
#define Z2_SERIAL_RX_PIN -1
#define Z2_SERIAL_RX_PIN -1
#endif
#ifndef E0_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN 44
#define E0_SERIAL_TX_PIN 44
#endif
#ifndef E0_SERIAL_RX_PIN
#define E0_SERIAL_RX_PIN 66
#define E0_SERIAL_RX_PIN 66
#endif
#ifndef E1_SERIAL_TX_PIN
#define E1_SERIAL_TX_PIN -1
#define E1_SERIAL_TX_PIN -1
#endif
#ifndef E1_SERIAL_RX_PIN
#define E1_SERIAL_RX_PIN -1
#define E1_SERIAL_RX_PIN -1
#endif
#ifndef E2_SERIAL_TX_PIN
#define E2_SERIAL_TX_PIN -1
#define E2_SERIAL_TX_PIN -1
#endif
#ifndef E2_SERIAL_RX_PIN
#define E2_SERIAL_RX_PIN -1
#define E2_SERIAL_RX_PIN -1
#endif
#ifndef E3_SERIAL_TX_PIN
#define E3_SERIAL_TX_PIN -1
#define E3_SERIAL_TX_PIN -1
#endif
#ifndef E3_SERIAL_RX_PIN
#define E3_SERIAL_RX_PIN -1
#define E3_SERIAL_RX_PIN -1
#endif
#ifndef E4_SERIAL_TX_PIN
#define E4_SERIAL_TX_PIN -1
#define E4_SERIAL_TX_PIN -1
#endif
#ifndef E4_SERIAL_RX_PIN
#define E4_SERIAL_RX_PIN -1
#define E4_SERIAL_RX_PIN -1
#endif
#ifndef E5_SERIAL_TX_PIN
#define E5_SERIAL_TX_PIN -1
#define E5_SERIAL_TX_PIN -1
#endif
#ifndef E5_SERIAL_RX_PIN
#define E5_SERIAL_RX_PIN -1
#define E5_SERIAL_RX_PIN -1
#endif
#ifndef E6_SERIAL_TX_PIN
#define E6_SERIAL_TX_PIN -1
#define E6_SERIAL_TX_PIN -1
#endif
#ifndef E6_SERIAL_RX_PIN
#define E6_SERIAL_RX_PIN -1
#define E6_SERIAL_RX_PIN -1
#endif
#ifndef E7_SERIAL_TX_PIN
#define E7_SERIAL_TX_PIN -1
#define E7_SERIAL_TX_PIN -1
#endif
#ifndef E7_SERIAL_RX_PIN
#define E7_SERIAL_RX_PIN -1
#define E7_SERIAL_RX_PIN -1
#endif
#endif
@ -394,62 +394,62 @@
//
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#else
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 25
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 25
#if DISABLED(NEWPANEL)
#define BEEPER_PIN 37
#define BEEPER_PIN 37
#endif
#elif ENABLED(ZONESTAR_LCD)
#define LCD_PINS_RS 64
#define LCD_PINS_ENABLE 44
#define LCD_PINS_D4 63
#define LCD_PINS_D5 40
#define LCD_PINS_D6 42
#define LCD_PINS_D7 65
#define LCD_PINS_RS 64
#define LCD_PINS_ENABLE 44
#define LCD_PINS_D4 63
#define LCD_PINS_D5 40
#define LCD_PINS_D6 42
#define LCD_PINS_D7 65
#else
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
#define LCD_PINS_DC 25 // Set as output on init
#define LCD_PINS_RS 27 // Pull low for 1s to init
#define LCD_PINS_DC 25 // Set as output on init
#define LCD_PINS_RS 27 // Pull low for 1s to init
// DOGM SPI LCD Support
#define DOGLCD_CS 16
#define DOGLCD_MOSI 17
#define DOGLCD_SCK 23
#define DOGLCD_A0 LCD_PINS_DC
#define DOGLCD_CS 16
#define DOGLCD_MOSI 17
#define DOGLCD_SCK 23
#define DOGLCD_A0 LCD_PINS_DC
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#endif
#define LCD_PINS_D7 29
#define LCD_PINS_D7 29
#if DISABLED(NEWPANEL)
#define BEEPER_PIN 33
#define BEEPER_PIN 33
#endif
#endif
@ -457,10 +457,10 @@
#if DISABLED(NEWPANEL)
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#endif
#endif
@ -472,85 +472,85 @@
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 37
#define BEEPER_PIN 37
#if ENABLED(CR10_STOCKDISPLAY)
#define BTN_EN1 17
#define BTN_EN2 23
#define BTN_EN1 17
#define BTN_EN2 23
#else
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_EN1 31
#define BTN_EN2 33
#endif
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
#define LCD_BACKLIGHT_PIN 39
#define LCD_BACKLIGHT_PIN 39
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
#define SD_DETECT_PIN 42
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
#define SD_DETECT_PIN 42
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS SDSS
#define KILL_PIN 41
#define BTN_EN1 47
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS SDSS
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1
#define LCD_SDSS SDSS
#define SD_DETECT_PIN 49
#define LCD_SDSS SDSS
#define SD_DETECT_PIN 49
#elif ANY(VIKI2, miniVIKI)
#define DOGLCD_CS 45
#define DOGLCD_A0 44
#define DOGLCD_CS 45
#define DOGLCD_A0 44
#define LCD_SCREEN_ROT_180
#define BEEPER_PIN 33
#define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35
#define BEEPER_PIN 33
#define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35
#define BTN_EN1 22
#define BTN_EN2 7
#define BTN_ENC 39
#define BTN_EN1 22
#define BTN_EN2 7
#define BTN_ENC 39
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 31
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 31
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define BEEPER_PIN 23
#define LCD_BACKLIGHT_PIN 33
#define BEEPER_PIN 23
#define LCD_BACKLIGHT_PIN 33
#define BTN_EN1 35
#define BTN_EN2 37
#define BTN_ENC 31
#define BTN_EN1 35
#define BTN_EN2 37
#define BTN_ENC 31
#define LCD_SDSS SDSS
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#define LCD_SDSS SDSS
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#elif ENABLED(MKS_MINI_12864)
#define DOGLCD_A0 27
#define DOGLCD_CS 25
#define DOGLCD_A0 27
#define DOGLCD_CS 25
// GLCD features
// Uncomment screen orientation
@ -558,25 +558,25 @@
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#define BEEPER_PIN 37
#define BEEPER_PIN 37
// not connected to a pin
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#define KILL_PIN 64
#define SD_DETECT_PIN 49
#define KILL_PIN 64
#elif ENABLED(MINIPANEL)
#define BEEPER_PIN 42
#define BEEPER_PIN 42
// not connected to a pin
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define DOGLCD_A0 44
#define DOGLCD_CS 66
#define DOGLCD_A0 44
#define DOGLCD_CS 66
// GLCD features
// Uncomment screen orientation
@ -584,16 +584,16 @@
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#define BTN_EN1 40
#define BTN_EN2 63
#define BTN_ENC 59
#define BTN_EN1 40
#define BTN_EN2 63
#define BTN_ENC 59
#define SD_DETECT_PIN 49
#define KILL_PIN 64
#define SD_DETECT_PIN 49
#define KILL_PIN 64
#elif ENABLED(ZONESTAR_LCD)
#define ADC_KEYPAD_PIN 12
#define ADC_KEYPAD_PIN 12
#elif ENABLED(AZSMZ_12864)
@ -602,29 +602,29 @@
#else
// Beeper on AUX-4
#define BEEPER_PIN 33
#define BEEPER_PIN 33
// Buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define SHIFT_OUT 40
#define SHIFT_CLK 44
#define SHIFT_LD 42
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
#define SHIFT_OUT 40
#define SHIFT_CLK 44
#define SHIFT_LD 42
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#endif
#endif

110
Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h
View file

@ -40,84 +40,84 @@
//
// Servos
//
#define SERVO0_PIN P1_23
#define SERVO0_PIN P1_23
//
// Limit Switches
//
#define X_MIN_PIN P1_24
#define Y_MIN_PIN P1_26
#define Z_MIN_PIN P1_28
#define Z_MAX_PIN P1_29
#define X_MIN_PIN P1_24
#define Y_MIN_PIN P1_26
#define Z_MIN_PIN P1_28
#define Z_MAX_PIN P1_29
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_23_A0 // A0 (TH1)
#define TEMP_BED_PIN P0_24_A1 // A1 (TH2)
#define TEMP_1_PIN P0_25_A2 // A2 (TH3)
#define TEMP_0_PIN P0_23_A0 // A0 (TH1)
#define TEMP_BED_PIN P0_24_A1 // A1 (TH2)
#define TEMP_1_PIN P0_25_A2 // A2 (TH3)
//
// Heaters / Fans
//
// EFB
#define HEATER_0_PIN P2_04
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_04
#define HEATER_BED_PIN P2_05
#ifndef FAN_PIN
#define FAN_PIN P2_07
#define FAN_PIN P2_07
#endif
#define FAN1_PIN P0_26
#define FAN1_PIN P0_26
#define LCD_SDSS P0_16 // LCD SD chip select
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define LCD_SDSS P0_16 // LCD SD chip select
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if ENABLED(AZSMZ_12864)
#define BEEPER_PIN P1_30
#define DOGLCD_A0 P2_06
#define DOGLCD_CS P1_22
#define BTN_EN1 P4_28
#define BTN_EN2 P1_27
#define BTN_ENC P3_26
#define BEEPER_PIN P1_30
#define DOGLCD_A0 P2_06
#define DOGLCD_CS P1_22
#define BTN_EN1 P4_28
#define BTN_EN2 P1_27
#define BTN_ENC P3_26
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION LCD
#define SDCARD_CONNECTION LCD
#endif
#endif
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SS_PIN LCD_SDSS
#define SD_DETECT_PIN P3_25
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SS_PIN LCD_SDSS
#define SD_DETECT_PIN P3_25
#elif SD_CONNECTION_IS(ONBOARD)
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
@ -125,16 +125,16 @@
//
// Ethernet pins
//
#define ENET_MDIO P1_17
#define ENET_RX_ER P1_14
#define ENET_RXD1 P1_10
#define ENET_MOC P1_16
#define REF_CLK P1_15
#define ENET_RXD0 P1_09
#define ENET_CRS P1_08
#define ENET_TX_EN P1_04
#define ENET_TXD0 P1_00
#define ENET_TXD1 P1_01
#define ENET_MDIO P1_17
#define ENET_RX_ER P1_14
#define ENET_RXD1 P1_10
#define ENET_MOC P1_16
#define REF_CLK P1_15
#define ENET_RXD0 P1_09
#define ENET_CRS P1_08
#define ENET_TX_EN P1_04
#define ENET_TXD0 P1_00
#define ENET_TXD1 P1_01
/**
* PWMs

90
Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h
View file

@ -47,42 +47,42 @@
//
// Limit Switches
//
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#ifndef X_CS_PIN
#define X_CS_PIN P1_15 // ETH
#define X_CS_PIN P1_15 // ETH
#endif
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#ifndef Y_CS_PIN
#define Y_CS_PIN P1_14 // ETH
#define Y_CS_PIN P1_14 // ETH
#endif
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#ifndef Z_CS_PIN
#define Z_CS_PIN P1_16 // ETH
#define Z_CS_PIN P1_16 // ETH
#endif
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#ifndef E0_CS_PIN
#define E0_CS_PIN P1_17 // ETH
#define E0_CS_PIN P1_17 // ETH
#endif
//
@ -90,13 +90,13 @@
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P0_18 // ETH
#define TMC_SW_MOSI P0_18 // ETH
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P0_17 // ETH
#define TMC_SW_MISO P0_17 // ETH
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P0_15 // ETH
#define TMC_SW_SCK P0_15 // ETH
#endif
#endif
@ -104,23 +104,23 @@
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_24_A1 // A0 (T0)
#define TEMP_BED_PIN P0_23_A0 // A1 (T1)
#define TEMP_0_PIN P0_24_A1 // A0 (T0)
#define TEMP_BED_PIN P0_23_A0 // A1 (T1)
//
// Heaters / Fans
//
#define HEATER_0_PIN P2_07
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07
#define HEATER_BED_PIN P2_05
#ifndef FAN_PIN
#define FAN_PIN P2_04
#define FAN_PIN P2_04
#endif
//
// Unused
//
//#define PIN_P2_10 P2_10 // IBOOT-1
//#define PIN_P0_27 P0_27 // Onboard SD Detect
//#define PIN_P2_10 P2_10 // IBOOT-1
//#define PIN_P0_27 P0_27 // Onboard SD Detect
/**
* LCD / Controller
@ -134,16 +134,16 @@
*/
#if HAS_SPI_LCD
#define BEEPER_PIN P1_31 // EXP1-1
#define BEEPER_PIN P1_31 // EXP1-1
#define BTN_EN1 P3_26 // EXP2-3
#define BTN_EN2 P3_25 // EXP2-5
#define BTN_ENC P1_30 // EXP1-2
#define BTN_EN1 P3_26 // EXP2-3
#define BTN_EN2 P3_25 // EXP2-5
#define BTN_ENC P1_30 // EXP1-2
#define SD_DETECT_PIN P0_27 // EXP2-7
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#define SD_DETECT_PIN P0_27 // EXP2-7
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD
#error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU B300 v1.0"
@ -162,11 +162,11 @@
* Hardware SPI can't be used because P0_17 (MISO) is not brought out on this board.
*/
#if ENABLED(SDSUPPORT)
#define SCK_PIN P0_15 // EXP1-5
#define MISO_PIN P0_16 // EXP1-4
#define MOSI_PIN P0_18 // EXP1-3
#define SS_PIN P1_30 // EXP1-2
#define SDSS SS_PIN
#define SCK_PIN P0_15 // EXP1-5
#define MISO_PIN P0_16 // EXP1-4
#define MOSI_PIN P0_18 // EXP1-3
#define SS_PIN P1_30 // EXP1-2
#define SDSS SS_PIN
#endif
/**

81
Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h
View file

@ -45,56 +45,53 @@
//
// Limit Switches
//
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series
//
// Steppers
//
#define X_STEP_PIN P2_0
#define X_DIR_PIN P0_5
#define X_ENABLE_PIN P0_4
#define X_STEP_PIN P2_0
#define X_DIR_PIN P0_5
#define X_ENABLE_PIN P0_4
#define Y_STEP_PIN P2_1
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_STEP_PIN P2_1
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Z_STEP_PIN P2_2
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define E0_STEP_PIN P2_3
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define Z_STEP_PIN P2_2
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define E0_STEP_PIN P2_3
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_23_A0 // A0 (T0)
#define TEMP_BED_PIN P0_24_A1 // A1 (T1)
#define TEMP_0_PIN P0_23_A0 // A0 (T0)
#define TEMP_BED_PIN P0_24_A1 // A1 (T1)
//
// Heaters / Fans
//
#define HEATER_0_PIN P2_7
#define HEATER_BED_PIN P2_5
#define HEATER_0_PIN P2_7
#define HEATER_BED_PIN P2_5
#ifndef FAN_PIN
#define FAN_PIN P2_4
#define FAN_PIN P2_4
#endif
//
// Unused
//
//#define PIN_P2_10 P2_10 // IBOOT-1
//#define PIN_P0_27 P0_27 // Onboard SD Detect
//#define PIN_P2_10 P2_10 // IBOOT-1
//#define PIN_P0_27 P0_27 // Onboard SD Detect
/**
* LCD / Controller
@ -108,16 +105,16 @@
*/
#if HAS_SPI_LCD
#define BEEPER_PIN P1_31 // EXP1-1
#define BEEPER_PIN P1_31 // EXP1-1
#define BTN_EN1 P3_26 // EXP2-3
#define BTN_EN2 P3_25 // EXP2-5
#define BTN_ENC P1_30 // EXP1-2
#define BTN_EN1 P3_26 // EXP2-3
#define BTN_EN2 P3_25 // EXP2-5
#define BTN_ENC P1_30 // EXP1-2
#define SD_DETECT_PIN P0_27 // EXP2-7
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#define SD_DETECT_PIN P0_27 // EXP2-7
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD
#error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4"
@ -129,7 +126,6 @@
#endif // HAS_SPI_LCD
/**
* SD Card Reader
*
@ -138,15 +134,14 @@
*/
#if ENABLED(SDSUPPORT)
#define SCK_PIN P0_15 // EXP1-5
#define MISO_PIN P0_16 // EXP1-4
#define MOSI_PIN P0_18 // EXP1-3
#define SS_PIN P1_30 // EXP1-2
#define SDSS SS_PIN
#define SCK_PIN P0_15 // EXP1-5
#define MISO_PIN P0_16 // EXP1-4
#define MOSI_PIN P0_18 // EXP1-3
#define SS_PIN P1_30 // EXP1-2
#define SDSS SS_PIN
#endif // SDSUPPORT
/**
* PWMS
*

137
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h
View file

@ -33,31 +33,31 @@
// Limit Switches
//
#define X_MIN_PIN P1_29
#define X_MAX_PIN P1_28
#define Y_MIN_PIN P1_27
#define Y_MAX_PIN P1_26
#define Z_MIN_PIN P1_25
#define Z_MAX_PIN P1_24
#define X_MIN_PIN P1_29
#define X_MAX_PIN P1_28
#define Y_MIN_PIN P1_27
#define Y_MAX_PIN P1_26
#define Z_MIN_PIN P1_25
#define Z_MAX_PIN P1_24
//
// Steppers
//
#define X_STEP_PIN P0_04
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P4_28
#define X_STEP_PIN P0_04
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P4_28
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P2_02
#define Y_ENABLE_PIN P2_00
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P2_02
#define Y_ENABLE_PIN P2_00
#define Z_STEP_PIN P0_20
#define Z_DIR_PIN P0_21
#define Z_ENABLE_PIN P0_19
#define Z_STEP_PIN P0_20
#define Z_DIR_PIN P0_21
#define Z_ENABLE_PIN P0_19
#define E0_STEP_PIN P0_11
#define E0_DIR_PIN P2_13
#define E0_ENABLE_PIN P2_12
#define E0_STEP_PIN P0_11
#define E0_DIR_PIN P2_13
#define E0_ENABLE_PIN P2_12
/**
* LCD / Controller
@ -73,19 +73,19 @@
*/
#if HAS_SPI_LCD
#define BTN_EN1 P3_26
#define BTN_EN2 P3_25
#define BTN_ENC P2_11
#define BTN_EN1 P3_26
#define BTN_EN2 P3_25
#define BTN_ENC P2_11
#define SD_DETECT_PIN P1_31
#define LCD_SDSS P1_23
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define SD_DETECT_PIN P1_31
#define LCD_SDSS P1_23
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P2_06
#define DOGLCD_A0 P0_16
#define DOGLCD_CS P2_06
#define DOGLCD_A0 P0_16
#endif
#endif
@ -97,14 +97,14 @@
// https://www.facebook.com/groups/505736576548648/permalink/630639874058317/
#ifndef SDCARD_CONNECTION
#if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
#define SDCARD_CONNECTION LCD
#define SDCARD_CONNECTION LCD
#else
#define SDCARD_CONNECTION ONBOARD
#define SDCARD_CONNECTION ONBOARD
#endif
#endif
#if SD_CONNECTION_IS(LCD)
#define SS_PIN P1_23
#define SS_PIN P1_23
#endif
// Trinamic driver support
@ -137,49 +137,48 @@
// When using any TMC SPI-based drivers, software SPI is used
// because pins may be shared with the display or SD card.
#define TMC_USE_SW_SPI
#define TMC_SW_MOSI P0_18
#define TMC_SW_MISO P0_17
#define TMC_SW_MOSI P0_18
#define TMC_SW_MISO P0_17
// To minimize pin usage use the same clock pin as the display/SD card reader. (May generate LCD noise.)
#define TMC_SW_SCK P0_15
#define TMC_SW_SCK P0_15
// If pin 2_06 is unused, it can be used for the clock to avoid the LCD noise.
//#define TMC_SW_SCK P2_06
//#define TMC_SW_SCK P2_06
#if ENABLED(SOFTWARE_DRIVER_ENABLE)
// Software enable allows the enable pins to be repurposed as chip-select pins.
// Note: Requires the driver modules to be modified to always be enabled with the enable pin removed.
#if AXIS_DRIVER_TYPE_X(TMC2130)
#define X_CS_PIN P4_28
#undef X_ENABLE_PIN
#define X_ENABLE_PIN -1
#define X_CS_PIN P4_28
#undef X_ENABLE_PIN
#define X_ENABLE_PIN -1
#endif
#if AXIS_DRIVER_TYPE_Y(TMC2130)
#define Y_CS_PIN P2_00
#undef Y_ENABLE_PIN
#define Y_ENABLE_PIN -1
#define Y_CS_PIN P2_00
#undef Y_ENABLE_PIN
#define Y_ENABLE_PIN -1
#endif
#if AXIS_DRIVER_TYPE_Z(TMC2130)
#define Z_CS_PIN P0_19
#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN -1
#define Z_CS_PIN P0_19
#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN -1
#endif
#if AXIS_DRIVER_TYPE_E0(TMC2130)
#define E0_CS_PIN P2_12
#undef E0_ENABLE_PIN
#define E0_ENABLE_PIN -1
#define E0_CS_PIN P2_12
#undef E0_ENABLE_PIN
#define E0_ENABLE_PIN -1
#endif
#if AXIS_DRIVER_TYPE_E1(TMC2130)
#define E1_CS_PIN P0_10
#undef E1_ENABLE_PIN
#define E1_ENABLE_PIN -1
#define E1_CS_PIN P0_10
#undef E1_ENABLE_PIN
#define E1_ENABLE_PIN -1
#endif
#else // !SOFTWARE_DRIVER_ENABLE
#else // !SOFTWARE_DRIVER_ENABLE
// A chip-select pin is needed for each driver.
@ -192,11 +191,11 @@
#if SD_CONNECTION_IS(LCD)
#error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_PINS_FOR_CS."
#endif
#define X_CS_PIN P1_23
#define Y_CS_PIN P3_26
#define Z_CS_PIN P2_11
#define E0_CS_PIN P3_25
#define E1_CS_PIN P1_31
#define X_CS_PIN P1_23
#define Y_CS_PIN P3_26
#define Z_CS_PIN P2_11
#define E0_CS_PIN P3_25
#define E1_CS_PIN P1_31
#endif
// Example 2: A REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
@ -207,16 +206,16 @@
#if SD_CONNECTION_IS(LCD)
#error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_SD_CARD_PINS_FOR_CS."
#endif
#define X_CS_PIN P0_02
#define Y_CS_PIN P0_03
#define Z_CS_PIN P2_06
#define X_CS_PIN P0_02
#define Y_CS_PIN P0_03
#define Z_CS_PIN P2_06
// We use SD_DETECT_PIN for E0
#undef SD_DETECT_PIN
#define E0_CS_PIN P1_31
#define E0_CS_PIN P1_31
// We use LCD_SDSS pin for E1
#undef LCD_SDSS
#define LCD_SDSS -1
#define E1_CS_PIN P1_23
#undef LCD_SDSS
#define LCD_SDSS -1
#define E1_CS_PIN P1_23
#endif
// Example 3: Use the driver enable pins for chip-select.
@ -224,11 +223,11 @@
// advanced features (like driver monitoring) will not be available.
//#define SKR_USE_ENABLE_CS
#if ENABLED(SKR_USE_ENABLE_FOR_CS)
#define X_CS_PIN X_ENABLE_PIN
#define Y_CS_PIN Y_ENABLE_PIN
#define Z_CS_PIN Z_ENABLE_PIN
#define E0_CS_PIN E0_ENABLE_PIN
#define E1_CS_PIN E1_ENABLE_PIN
#define X_CS_PIN X_ENABLE_PIN
#define Y_CS_PIN Y_ENABLE_PIN
#define Z_CS_PIN Z_ENABLE_PIN
#define E0_CS_PIN E0_ENABLE_PIN
#define E1_CS_PIN E1_ENABLE_PIN
#endif
#endif // SOFTWARE_DRIVER_ENABLE

244
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
View file

@ -32,107 +32,107 @@
/**
* Trinamic Stallguard pins
*/
#define X_DIAG_PIN P1_29 // X-
#define Y_DIAG_PIN P1_27 // Y-
#define Z_DIAG_PIN P1_25 // Z-
#define E0_DIAG_PIN P1_28 // X+
#define E1_DIAG_PIN P1_26 // Y+
#define X_DIAG_PIN P1_29 // X-
#define Y_DIAG_PIN P1_27 // Y-
#define Z_DIAG_PIN P1_25 // Z-
#define E0_DIAG_PIN P1_28 // X+
#define E1_DIAG_PIN P1_26 // Y+
/**
* Limit Switches
*/
#if X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#define X_MAX_PIN P1_28 // X+
#define X_MAX_PIN P1_28 // X+
#else
#define X_MIN_PIN P1_28 // X+
#define X_MIN_PIN P1_28 // X+
#endif
#else
#define X_MIN_PIN P1_29 // X-
#define X_MAX_PIN P1_28 // X+
#define X_MIN_PIN P1_29 // X-
#define X_MAX_PIN P1_28 // X+
#endif
#if Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#define Y_MAX_PIN P1_26 // Y+
#define Y_MAX_PIN P1_26 // Y+
#else
#define Y_MIN_PIN P1_26 // Y+
#define Y_MIN_PIN P1_26 // Y+
#endif
#else
#define Y_MIN_PIN P1_27 // Y-
#define Y_MAX_PIN P1_26 // Y+
#define Y_MIN_PIN P1_27 // Y-
#define Y_MAX_PIN P1_26 // Y+
#endif
#if Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#define Z_MAX_PIN P1_24 // Z+
#define Z_MAX_PIN P1_24 // Z+
#else
#define Z_MIN_PIN P1_24 // Z+
#define Z_MIN_PIN P1_24 // Z+
#endif
#else
#define Z_MIN_PIN P1_25 // Z-
#define Z_MAX_PIN P1_24 // Z+
#define Z_MIN_PIN P1_25 // Z-
#define Z_MAX_PIN P1_24 // Z+
#endif
#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups
#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups
//
// Servos
//
#ifndef SERVO0_PIN
#define SERVO0_PIN P2_00
#define SERVO0_PIN P2_00
#endif
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN P1_24
#define Z_MIN_PROBE_PIN P1_24
#endif
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN P1_28
#define FIL_RUNOUT_PIN P1_28
#endif
//
// Steppers
//
#define X_STEP_PIN P2_02
#define X_DIR_PIN P2_06
#define X_ENABLE_PIN P2_01
#define X_STEP_PIN P2_02
#define X_DIR_PIN P2_06
#define X_ENABLE_PIN P2_01
#ifndef X_CS_PIN
#define X_CS_PIN P1_17
#define X_CS_PIN P1_17
#endif
#define Y_STEP_PIN P0_19
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P2_08
#define Y_STEP_PIN P0_19
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P2_08
#ifndef Y_CS_PIN
#define Y_CS_PIN P1_15
#define Y_CS_PIN P1_15
#endif
#define Z_STEP_PIN P0_22
#define Z_DIR_PIN P2_11
#define Z_ENABLE_PIN P0_21
#define Z_STEP_PIN P0_22
#define Z_DIR_PIN P2_11
#define Z_ENABLE_PIN P0_21
#ifndef Z_CS_PIN
#define Z_CS_PIN P1_10
#define Z_CS_PIN P1_10
#endif
#define E0_STEP_PIN P2_13
#define E0_DIR_PIN P0_11
#define E0_ENABLE_PIN P2_12
#define E0_STEP_PIN P2_13
#define E0_DIR_PIN P0_11
#define E0_ENABLE_PIN P2_12
#ifndef E0_CS_PIN
#define E0_CS_PIN P1_08
#define E0_CS_PIN P1_08
#endif
#ifndef E1_CS_PIN
#define E1_CS_PIN P1_01
#define E1_CS_PIN P1_01
#endif
//
@ -140,17 +140,17 @@
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P4_28
#define TMC_SW_MOSI P4_28
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P0_05
#define TMC_SW_MISO P0_05
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P0_04
#define TMC_SW_SCK P0_04
#endif
#endif
#if HAS_TMC220x
#if HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
*
@ -172,20 +172,20 @@
//
// Software serial
//
#define X_SERIAL_TX_PIN P4_29
#define X_SERIAL_RX_PIN P1_17
#define X_SERIAL_TX_PIN P4_29
#define X_SERIAL_RX_PIN P1_17
#define Y_SERIAL_TX_PIN P1_16
#define Y_SERIAL_RX_PIN P1_15
#define Y_SERIAL_TX_PIN P1_16
#define Y_SERIAL_RX_PIN P1_15
#define Z_SERIAL_TX_PIN P1_14
#define Z_SERIAL_RX_PIN P1_10
#define Z_SERIAL_TX_PIN P1_14
#define Z_SERIAL_RX_PIN P1_10
#define E0_SERIAL_TX_PIN P1_09
#define E0_SERIAL_RX_PIN P1_08
#define E0_SERIAL_TX_PIN P1_09
#define E0_SERIAL_RX_PIN P1_08
#define E1_SERIAL_TX_PIN P1_04
#define E1_SERIAL_RX_PIN P1_01
#define E1_SERIAL_TX_PIN P1_04
#define E1_SERIAL_RX_PIN P1_01
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
@ -202,23 +202,23 @@
* EXP2 EXP1
*/
#define EXPA1_03_PIN P1_23
#define EXPA1_04_PIN P1_22
#define EXPA1_05_PIN P1_21
#define EXPA1_06_PIN P1_20
#define EXPA1_07_PIN P1_19
#define EXPA1_08_PIN P1_18
#define EXPA1_09_PIN P0_28
#define EXPA1_10_PIN P1_30
#define EXPA1_03_PIN P1_23
#define EXPA1_04_PIN P1_22
#define EXPA1_05_PIN P1_21
#define EXPA1_06_PIN P1_20
#define EXPA1_07_PIN P1_19
#define EXPA1_08_PIN P1_18
#define EXPA1_09_PIN P0_28
#define EXPA1_10_PIN P1_30
#define EXPA2_03_PIN -1
#define EXPA2_04_PIN P1_31
#define EXPA2_05_PIN P0_18
#define EXPA2_06_PIN P3_25
#define EXPA2_07_PIN P0_16
#define EXPA2_08_PIN P3_26
#define EXPA2_09_PIN P0_15
#define EXPA2_10_PIN P0_17
#define EXPA2_03_PIN -1
#define EXPA2_04_PIN P1_31
#define EXPA2_05_PIN P0_18
#define EXPA2_06_PIN P3_25
#define EXPA2_07_PIN P0_16
#define EXPA2_08_PIN P3_26
#define EXPA2_09_PIN P0_15
#define EXPA2_10_PIN P0_17
#if HAS_SPI_LCD
@ -247,75 +247,75 @@
* LCD LCD
*/
#define LCD_PINS_RS EXPA1_03_PIN
#define LCD_PINS_RS EXPA1_03_PIN
#define BTN_EN1 EXPA1_06_PIN
#define BTN_EN2 EXPA1_04_PIN
#define BTN_ENC EXPA1_08_PIN
#define BTN_EN1 EXPA1_06_PIN
#define BTN_EN2 EXPA1_04_PIN
#define BTN_ENC EXPA1_08_PIN
#define LCD_PINS_ENABLE EXPA1_05_PIN
#define LCD_PINS_D4 EXPA1_07_PIN
#define LCD_PINS_ENABLE EXPA1_05_PIN
#define LCD_PINS_D4 EXPA1_07_PIN
#elif ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS EXPA1_04_PIN
#define LCD_PINS_RS EXPA1_04_PIN
#define BTN_EN1 EXPA1_08_PIN
#define BTN_EN2 EXPA1_06_PIN
#define BTN_ENC EXPA1_09_PIN // (58) open-drain
#define BTN_EN1 EXPA1_08_PIN
#define BTN_EN2 EXPA1_06_PIN
#define BTN_ENC EXPA1_09_PIN // (58) open-drain
#define LCD_PINS_ENABLE EXPA1_03_PIN
#define LCD_PINS_D4 EXPA1_05_PIN
#define LCD_PINS_ENABLE EXPA1_03_PIN
#define LCD_PINS_D4 EXPA1_05_PIN
#else // !CR10_STOCKDISPLAY
#else // !CR10_STOCKDISPLAY
#define LCD_PINS_RS EXPA1_07_PIN
#define LCD_PINS_RS EXPA1_07_PIN
#define BTN_EN1 EXPA2_08_PIN // (31) J3-2 & AUX-4
#define BTN_EN2 EXPA2_06_PIN // (33) J3-4 & AUX-4
#define BTN_ENC EXPA1_09_PIN // (58) open-drain
#define BTN_EN1 EXPA2_08_PIN // (31) J3-2 & AUX-4
#define BTN_EN2 EXPA2_06_PIN // (33) J3-4 & AUX-4
#define BTN_ENC EXPA1_09_PIN // (58) open-drain
#define LCD_PINS_ENABLE EXPA1_08_PIN
#define LCD_PINS_D4 EXPA1_06_PIN
#define LCD_PINS_ENABLE EXPA1_08_PIN
#define LCD_PINS_D4 EXPA1_06_PIN
#define LCD_SDSS EXPA2_07_PIN // (16) J3-7 & AUX-4
#define SD_DETECT_PIN EXPA2_04_PIN // (49) (NOT 5V tolerant)
#define LCD_SDSS EXPA2_07_PIN // (16) J3-7 & AUX-4
#define SD_DETECT_PIN EXPA2_04_PIN // (49) (NOT 5V tolerant)
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS EXPA1_08_PIN
#define DOGLCD_A0 EXPA1_07_PIN
#define DOGLCD_SCK EXPA2_09_PIN
#define DOGLCD_MOSI EXPA2_05_PIN
#define DOGLCD_CS EXPA1_08_PIN
#define DOGLCD_A0 EXPA1_07_PIN
#define DOGLCD_SCK EXPA2_09_PIN
#define DOGLCD_MOSI EXPA2_05_PIN
#define LCD_BACKLIGHT_PIN -1
#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN EXPA1_05_PIN
#define RGB_LED_R_PIN EXPA1_05_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN EXPA1_04_PIN
#define RGB_LED_G_PIN EXPA1_04_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN EXPA1_03_PIN
#define RGB_LED_B_PIN EXPA1_03_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN EXPA1_05_PIN
#define NEOPIXEL_PIN EXPA1_05_PIN
#endif
#else // !FYSETC_MINI_12864
#else // !FYSETC_MINI_12864
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS EXPA1_05_PIN
#define DOGLCD_A0 EXPA1_04_PIN
#define DOGLCD_SCK EXPA2_09_PIN
#define DOGLCD_MOSI EXPA2_05_PIN
#define DOGLCD_CS EXPA1_05_PIN
#define DOGLCD_A0 EXPA1_04_PIN
#define DOGLCD_SCK EXPA2_09_PIN
#define DOGLCD_MOSI EXPA2_05_PIN
#elif ENABLED(ENDER2_STOCKDISPLAY)
@ -331,21 +331,21 @@
* EXP1
*/
#define BTN_EN1 EXPA1_08_PIN
#define BTN_EN2 EXPA1_06_PIN
#define BTN_ENC EXPA1_09_PIN
#define DOGLCD_CS EXPA1_04_PIN
#define DOGLCD_A0 EXPA1_05_PIN
#define DOGLCD_SCK EXPA1_10_PIN
#define DOGLCD_MOSI EXPA1_03_PIN
#define BTN_EN1 EXPA1_08_PIN
#define BTN_EN2 EXPA1_06_PIN
#define BTN_ENC EXPA1_09_PIN
#define DOGLCD_CS EXPA1_04_PIN
#define DOGLCD_A0 EXPA1_05_PIN
#define DOGLCD_SCK EXPA1_10_PIN
#define DOGLCD_MOSI EXPA1_03_PIN
#define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1
#define LCD_BACKLIGHT_PIN -1
#endif
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 EXPA1_05_PIN
#define LCD_PINS_D6 EXPA1_04_PIN
#define LCD_PINS_D7 EXPA1_03_PIN
#define LCD_PINS_D5 EXPA1_05_PIN
#define LCD_PINS_D6 EXPA1_04_PIN
#define LCD_PINS_D7 EXPA1_03_PIN
#endif
#endif // !FYSETC_MINI_12864
@ -359,11 +359,11 @@
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION LCD
#define SDCARD_CONNECTION LCD
#endif
#if SD_CONNECTION_IS(LCD)
#define SS_PIN EXPA2_07_PIN
#define SS_PIN EXPA2_07_PIN
#endif
/**

208
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View file

@ -37,58 +37,58 @@
// SD Connection
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION LCD
#define SDCARD_CONNECTION LCD
#endif
//
// Servos
//
#define SERVO0_PIN P2_00
#define SERVO0_PIN P2_00
//
// TMC StallGuard DIAG pins
//
#define X_DIAG_PIN P1_29 // X-STOP
#define Y_DIAG_PIN P1_28 // Y-STOP
#define Z_DIAG_PIN P1_27 // Z-STOP
#define E0_DIAG_PIN P1_26 // E0DET
#define E1_DIAG_PIN P1_25 // E1DET
#define X_DIAG_PIN P1_29 // X-STOP
#define Y_DIAG_PIN P1_28 // Y-STOP
#define Z_DIAG_PIN P1_27 // Z-STOP
#define E0_DIAG_PIN P1_26 // E0DET
#define E1_DIAG_PIN P1_25 // E1DET
//
// Limit Switches
//
#if X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#define X_MAX_PIN P1_26 // E0DET
#define X_MAX_PIN P1_26 // E0DET
#else
#define X_MIN_PIN P1_26 // E0DET
#define X_MIN_PIN P1_26 // E0DET
#endif
#else
#define X_STOP_PIN P1_29 // X-STOP
#define X_STOP_PIN P1_29 // X-STOP
#endif
#if Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#define Y_MAX_PIN P1_25 // E1DET
#define Y_MAX_PIN P1_25 // E1DET
#else
#define Y_MIN_PIN P1_25 // E1DET
#define Y_MIN_PIN P1_25 // E1DET
#endif
#else
#define Y_STOP_PIN P1_28 // Y-STOP
#define Y_STOP_PIN P1_28 // Y-STOP
#endif
#if Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#define Z_MAX_PIN P1_00 // PWRDET
#define Z_MAX_PIN P1_00 // PWRDET
#else
#define Z_MIN_PIN P1_00 // PWRDET
#define Z_MIN_PIN P1_00 // PWRDET
#endif
#else
#ifndef Z_STOP_PIN
#define Z_STOP_PIN P1_27 // Z-STOP
#define Z_STOP_PIN P1_27 // Z-STOP
#endif
#endif
@ -96,86 +96,86 @@
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN P0_10
#define Z_MIN_PROBE_PIN P0_10
#endif
//
// Filament Runout Sensor
//
#define FIL_RUNOUT_PIN P1_26 // E0DET
#define FIL_RUNOUT2_PIN P1_25 // E1DET
#define FIL_RUNOUT_PIN P1_26 // E0DET
#define FIL_RUNOUT2_PIN P1_25 // E1DET
//
// Power Supply Control
//
#ifndef PS_ON_PIN
#define PS_ON_PIN P1_00 // PWRDET
#define PS_ON_PIN P1_00 // PWRDET
#endif
//
// Power Loss Detection
//
#ifndef POWER_LOSS_PIN
#define POWER_LOSS_PIN P1_00 // PWRDET
#define POWER_LOSS_PIN P1_00 // PWRDET
#endif
//
// Steppers
//
#define X_STEP_PIN P2_02
#define X_DIR_PIN P2_06
#define X_ENABLE_PIN P2_01
#define X_STEP_PIN P2_02
#define X_DIR_PIN P2_06
#define X_ENABLE_PIN P2_01
#ifndef X_CS_PIN
#define X_CS_PIN P1_10
#define X_CS_PIN P1_10
#endif
#define Y_STEP_PIN P0_19
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P2_08
#define Y_STEP_PIN P0_19
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P2_08
#ifndef Y_CS_PIN
#define Y_CS_PIN P1_09
#define Y_CS_PIN P1_09
#endif
#define Z_STEP_PIN P0_22
#define Z_DIR_PIN P2_11
#define Z_ENABLE_PIN P0_21
#define Z_STEP_PIN P0_22
#define Z_DIR_PIN P2_11
#define Z_ENABLE_PIN P0_21
#ifndef Z_CS_PIN
#define Z_CS_PIN P1_08
#define Z_CS_PIN P1_08
#endif
#define E0_STEP_PIN P2_13
#define E0_DIR_PIN P0_11
#define E0_ENABLE_PIN P2_12
#define E0_STEP_PIN P2_13
#define E0_DIR_PIN P0_11
#define E0_ENABLE_PIN P2_12
#ifndef E0_CS_PIN
#define E0_CS_PIN P1_04
#define E0_CS_PIN P1_04
#endif
#define E1_STEP_PIN P1_15
#define E1_DIR_PIN P1_14
#define E1_ENABLE_PIN P1_16
#define E1_STEP_PIN P1_15
#define E1_DIR_PIN P1_14
#define E1_ENABLE_PIN P1_16
#ifndef E1_CS_PIN
#define E1_CS_PIN P1_01
#define E1_CS_PIN P1_01
#endif
#define TEMP_1_PIN P0_23_A0 // A2 (T2) - (69) - TEMP_1_PIN
#define TEMP_BED_PIN P0_25_A2 // A0 (T0) - (67) - TEMP_BED_PIN
#define TEMP_1_PIN P0_23_A0 // A2 (T2) - (69) - TEMP_1_PIN
#define TEMP_BED_PIN P0_25_A2 // A0 (T0) - (67) - TEMP_BED_PIN
//
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P1_17
#define TMC_SW_MOSI P1_17
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P0_05
#define TMC_SW_MISO P0_05
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P0_04
#define TMC_SW_SCK P0_04
#endif
#endif
#if HAS_TMC220x
#if HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
*
@ -197,23 +197,23 @@
//
// Software serial
//
#define X_SERIAL_TX_PIN P1_10
#define X_SERIAL_RX_PIN P1_10
#define X_SERIAL_TX_PIN P1_10
#define X_SERIAL_RX_PIN P1_10
#define Y_SERIAL_TX_PIN P1_09
#define Y_SERIAL_RX_PIN P1_09
#define Y_SERIAL_TX_PIN P1_09
#define Y_SERIAL_RX_PIN P1_09
#define Z_SERIAL_TX_PIN P1_08
#define Z_SERIAL_RX_PIN P1_08
#define Z_SERIAL_TX_PIN P1_08
#define Z_SERIAL_RX_PIN P1_08
#define E0_SERIAL_TX_PIN P1_04
#define E0_SERIAL_RX_PIN P1_04
#define E0_SERIAL_TX_PIN P1_04
#define E0_SERIAL_RX_PIN P1_04
#define E1_SERIAL_TX_PIN P1_01
#define E1_SERIAL_RX_PIN P1_01
#define E1_SERIAL_TX_PIN P1_01
#define E1_SERIAL_RX_PIN P1_01
#define Z2_SERIAL_TX_PIN P1_01
#define Z2_SERIAL_RX_PIN P1_01
#define Z2_SERIAL_TX_PIN P1_01
#define Z2_SERIAL_RX_PIN P1_01
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
@ -223,7 +223,7 @@
// SD Connection
//
#if SD_CONNECTION_IS(LCD)
#define SS_PIN P0_16
#define SS_PIN P0_16
#endif
/**
@ -239,82 +239,82 @@
#if HAS_SPI_LCD
#if ENABLED(ANET_FULL_GRAPHICS_LCD)
#define LCD_PINS_RS P1_23
#define LCD_PINS_RS P1_23
#define BTN_EN1 P1_20
#define BTN_EN2 P1_22
#define BTN_ENC P1_18
#define BTN_EN1 P1_20
#define BTN_EN2 P1_22
#define BTN_ENC P1_18
#define LCD_PINS_ENABLE P1_21
#define LCD_PINS_D4 P1_19
#define LCD_PINS_ENABLE P1_21
#define LCD_PINS_D4 P1_19
#elif ENABLED(CR10_STOCKDISPLAY)
#define BTN_ENC P0_28 // (58) open-drain
#define LCD_PINS_RS P1_22
#define BTN_ENC P0_28 // (58) open-drain
#define LCD_PINS_RS P1_22
#define BTN_EN1 P1_18
#define BTN_EN2 P1_20
#define BTN_EN1 P1_18
#define BTN_EN2 P1_20
#define LCD_PINS_ENABLE P1_23
#define LCD_PINS_D4 P1_21
#define LCD_PINS_ENABLE P1_23
#define LCD_PINS_D4 P1_21
#else
#define BTN_ENC P0_28 // (58) open-drain
#define LCD_PINS_RS P1_19
#define BTN_ENC P0_28 // (58) open-drain
#define LCD_PINS_RS P1_19
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define LCD_PINS_ENABLE P1_18
#define LCD_PINS_D4 P1_20
#define LCD_PINS_ENABLE P1_18
#define LCD_PINS_D4 P1_20
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
#if SD_CONNECTION_IS(LCD)
#define SD_DETECT_PIN P1_31 // (49) (NOT 5V tolerant)
#define SD_DETECT_PIN P1_31 // (49) (NOT 5V tolerant)
#endif
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS P1_18
#define DOGLCD_A0 P1_19
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define DOGLCD_CS P1_18
#define DOGLCD_A0 P1_19
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define LCD_BACKLIGHT_PIN -1
#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN P1_20 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN P1_20 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN P1_21
#define RGB_LED_R_PIN P1_21
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN P1_22
#define RGB_LED_G_PIN P1_22
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN P1_23
#define RGB_LED_B_PIN P1_23
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN P1_21
#define NEOPIXEL_PIN P1_21
#endif
#else // !FYSETC_MINI_12864
#else // !FYSETC_MINI_12864
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P1_21
#define DOGLCD_A0 P1_22
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define DOGLCD_CS P1_21
#define DOGLCD_A0 P1_22
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define FORCE_SOFT_SPI
#endif
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 P1_21
#define LCD_PINS_D6 P1_22
#define LCD_PINS_D7 P1_23
#define LCD_PINS_D5 P1_21
#define LCD_PINS_D6 P1_22
#define LCD_PINS_D7 P1_23
#endif
#endif // !FYSETC_MINI_12864
@ -327,7 +327,7 @@
// Neopixel LED
//
#ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN P1_24
#define NEOPIXEL_PIN P1_24
#endif
/**

44
Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h
View file

@ -40,13 +40,13 @@
// Steppers
//
#ifndef E1_STEP_PIN
#define E1_STEP_PIN P0_01
#define E1_STEP_PIN P0_01
#endif
#ifndef E1_DIR_PIN
#define E1_DIR_PIN P0_00
#define E1_DIR_PIN P0_00
#endif
#ifndef E1_ENABLE_PIN
#define E1_ENABLE_PIN P0_10
#define E1_ENABLE_PIN P0_10
#endif
//
@ -54,64 +54,64 @@
// 3.3V max when defined as an analog input
//
#ifndef TEMP_0_PIN
#define TEMP_0_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_0_PIN
#define TEMP_0_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_0_PIN
#endif
#ifndef TEMP_1_PIN
#define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN
#define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN
#endif
#ifndef TEMP_BED_PIN
#define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN
#define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN
#endif
#if HOTENDS == 1 && TEMP_SENSOR_PROBE
#define TEMP_PROBE_PIN TEMP_1_PIN
#define TEMP_PROBE_PIN TEMP_1_PIN
#endif
//
// Heaters / Fans
//
#ifndef HEATER_0_PIN
#define HEATER_0_PIN P2_07
#define HEATER_0_PIN P2_07
#endif
#if HOTENDS == 1
#ifndef FAN1_PIN
#define FAN1_PIN P2_04
#define FAN1_PIN P2_04
#endif
#else
#ifndef HEATER_1_PIN
#define HEATER_1_PIN P2_04
#define HEATER_1_PIN P2_04
#endif
#endif
#ifndef FAN_PIN
#define FAN_PIN P2_03
#define FAN_PIN P2_03
#endif
#ifndef HEATER_BED_PIN
#define HEATER_BED_PIN P2_05
#define HEATER_BED_PIN P2_05
#endif
//
// LCD / Controller
//
#if HAS_SPI_LCD
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
#endif
//
// SD Support
//
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif

132
Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h
View file

@ -44,63 +44,63 @@
//
// Servos
//
#define SERVO0_PIN P1_26 // PWM1[6]
#define SERVO1_PIN P1_18 // PWM1[1]
#define SERVO0_PIN P1_26 // PWM1[6]
#define SERVO1_PIN P1_18 // PWM1[1]
//
// Limit Switches
//
#define X_MIN_PIN P0_00
#define X_MAX_PIN P0_01
#define Y_MIN_PIN P0_10
#define Y_MAX_PIN P0_21
#define Z_MIN_PIN P2_13
#define Z_MAX_PIN P2_22
#define X_MIN_PIN P0_00
#define X_MAX_PIN P0_01
#define Y_MIN_PIN P0_10
#define Y_MAX_PIN P0_21
#define Z_MIN_PIN P2_13
#define Z_MAX_PIN P2_22
//
// Steppers
//
#define X_STEP_PIN P1_01
#define X_DIR_PIN P1_04
#define X_ENABLE_PIN P0_26
#define X_STEP_PIN P1_01
#define X_DIR_PIN P1_04
#define X_ENABLE_PIN P0_26
#define Y_STEP_PIN P1_10
#define Y_DIR_PIN P1_14
#define Y_ENABLE_PIN P1_08
#define Y_STEP_PIN P1_10
#define Y_DIR_PIN P1_14
#define Y_ENABLE_PIN P1_08
#define Z_STEP_PIN P1_17
#define Z_DIR_PIN P4_29
#define Z_ENABLE_PIN P1_15
#define Z_STEP_PIN P1_17
#define Z_DIR_PIN P4_29
#define Z_ENABLE_PIN P1_15
#define E0_STEP_PIN P0_05
#define E0_DIR_PIN P2_00
#define E0_ENABLE_PIN P4_28
#define E0_STEP_PIN P0_05
#define E0_DIR_PIN P2_00
#define E0_ENABLE_PIN P4_28
#define E1_STEP_PIN P2_03
#define E1_DIR_PIN P2_04
#define E1_ENABLE_PIN P2_01
#define E1_STEP_PIN P2_03
#define E1_DIR_PIN P2_04
#define E1_ENABLE_PIN P2_01
#define E2_STEP_PIN P2_07
#define E2_DIR_PIN P2_08
#define E2_ENABLE_PIN P2_05
#define E2_STEP_PIN P2_07
#define E2_DIR_PIN P2_08
#define E2_ENABLE_PIN P2_05
//
// TMC2208 UART pins
//
#if HAS_TMC_UART
#define X_SERIAL_TX_PIN P1_00
#define X_SERIAL_RX_PIN P1_00
#define Y_SERIAL_TX_PIN P1_09
#define Y_SERIAL_RX_PIN P1_09
#define Z_SERIAL_TX_PIN P1_16
#define Z_SERIAL_RX_PIN P1_16
#define E0_SERIAL_TX_PIN P0_04
#define E0_SERIAL_RX_PIN P0_04
#define E1_SERIAL_TX_PIN P2_02
#define E1_SERIAL_RX_PIN P2_02
#define E2_SERIAL_TX_PIN P2_06
#define E2_SERIAL_RX_PIN P2_06
#define X_SERIAL_TX_PIN P1_00
#define X_SERIAL_RX_PIN P1_00
#define Y_SERIAL_TX_PIN P1_09
#define Y_SERIAL_RX_PIN P1_09
#define Z_SERIAL_TX_PIN P1_16
#define Z_SERIAL_RX_PIN P1_16
#define E0_SERIAL_TX_PIN P0_04
#define E0_SERIAL_RX_PIN P0_04
#define E1_SERIAL_TX_PIN P2_02
#define E1_SERIAL_RX_PIN P2_02
#define E2_SERIAL_TX_PIN P2_06
#define E2_SERIAL_RX_PIN P2_06
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
@ -112,36 +112,36 @@
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_24_A1 // AD0[0] on P0_23
#define TEMP_BED_PIN P0_23_A0 // AD0[1] on P0_24
#define TEMP_0_PIN P0_24_A1 // AD0[0] on P0_23
#define TEMP_BED_PIN P0_23_A0 // AD0[1] on P0_24
//
// Heaters / Fans
//
#define HEATER_BED_PIN P1_19 // Not a PWM pin, software PWM required
#define HEATER_0_PIN P3_26 // PWM1[3]
#define FAN_PIN P3_25 // Part cooling fan - connected to PWM1[2]
#define E0_AUTO_FAN_PIN P0_27 // Extruder cooling fan
#define HEATER_BED_PIN P1_19 // Not a PWM pin, software PWM required
#define HEATER_0_PIN P3_26 // PWM1[3]
#define FAN_PIN P3_25 // Part cooling fan - connected to PWM1[2]
#define E0_AUTO_FAN_PIN P0_27 // Extruder cooling fan
//
// Misc. Functions
//
#define LED_PIN P1_31
#define LED_PIN P1_31
//
// LCD
//
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN P0_19
#define BTN_EN1 P1_23
#define BTN_EN2 P1_24
#define BTN_ENC P1_25
#define LCD_PINS_RS P0_20
#define LCD_PINS_ENABLE P0_21
#define LCD_PINS_D4 P2_11
#define LCD_PINS_D5 P0_22
#define LCD_PINS_D6 P1_29
#define LCD_PINS_D7 P1_28
#define BEEPER_PIN P0_19
#define BTN_EN1 P1_23
#define BTN_EN2 P1_24
#define BTN_ENC P1_25
#define LCD_PINS_RS P0_20
#define LCD_PINS_ENABLE P0_21
#define LCD_PINS_D4 P2_11
#define LCD_PINS_D5 P0_22
#define LCD_PINS_D6 P1_29
#define LCD_PINS_D7 P1_28
#endif
//
@ -149,21 +149,21 @@
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION LCD
#define SDCARD_CONNECTION LCD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SS_PIN P0_16
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SS_PIN P0_16
#elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#endif

236
Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
View file

@ -46,73 +46,73 @@
//#define SDCARD_EEPROM_EMULATION
#endif
#define LED_PIN P1_18 // Used as a status indicator
#define LED2_PIN P1_19
#define LED3_PIN P1_20
#define LED4_PIN P1_21
#define LED_PIN P1_18 // Used as a status indicator
#define LED2_PIN P1_19
#define LED3_PIN P1_20
#define LED4_PIN P1_21
//
// Servos
//
#define SERVO0_PIN P1_23 // J8-3 (low jitter)
#define SERVO1_PIN P2_12 // J8-4
#define SERVO2_PIN P2_11 // J8-5
#define SERVO3_PIN P4_28 // J8-6
#define SERVO0_PIN P1_23 // J8-3 (low jitter)
#define SERVO1_PIN P2_12 // J8-4
#define SERVO2_PIN P2_11 // J8-5
#define SERVO3_PIN P4_28 // J8-6
//
// Limit Switches - Not Interrupt Capable
//
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_28 // The original Mks Sbase DIO19 has a 10k pullup to 3.3V or 5V, 1K series, so when using a Zprobe we must use DIO41 (J8 P1.22)
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_28 // The original Mks Sbase DIO19 has a 10k pullup to 3.3V or 5V, 1K series, so when using a Zprobe we must use DIO41 (J8 P1.22)
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN P4_28 // Connector J8
#define Z_MIN_PROBE_PIN P4_28 // Connector J8
#endif
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
#define TEMP_0_PIN P0_24_A1 // A1 (TH2)
#define TEMP_1_PIN P0_25_A2 // A2 (TH3)
#define TEMP_2_PIN P0_26_A3 // A3 (TH4)
#define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
#define TEMP_0_PIN P0_24_A1 // A1 (TH2)
#define TEMP_1_PIN P0_25_A2 // A2 (TH3)
#define TEMP_2_PIN P0_26_A3 // A3 (TH4)
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07
#define HEATER_1_PIN P2_06
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07
#define HEATER_1_PIN P2_06
#ifndef FAN_PIN
#define FAN_PIN P2_04
#define FAN_PIN P2_04
#endif
//
@ -124,56 +124,56 @@
// 5V
// NC
// GND
#define PIN_P0_17 P0_17
#define PIN_P0_16 P0_16
#define PIN_P0_15 P0_15
#define PIN_P0_17 P0_17
#define PIN_P0_16 P0_16
#define PIN_P0_15 P0_15
//
// Connector J8
//
// GND
#define PIN_P1_22 P1_22
#define PIN_P1_23 P1_23 // PWM Capable
#define PIN_P2_12 P2_12 // Interrupt Capable
#define PIN_P2_11 P2_11 // Interrupt Capable
#define PIN_P1_22 P1_22
#define PIN_P1_23 P1_23 // PWM Capable
#define PIN_P2_12 P2_12 // Interrupt Capable
#define PIN_P2_11 P2_11 // Interrupt Capable
//
// Průša i3 MK2 Multi Material Multiplexer Support
//
#if ENABLED(MK2_MULTIPLEXER)
#define E_MUX0_PIN P1_23 // J8-3
#define E_MUX1_PIN P2_12 // J8-4
#define E_MUX2_PIN P2_11 // J8-5
#define E_MUX0_PIN P1_23 // J8-3
#define E_MUX1_PIN P2_12 // J8-4
#define E_MUX2_PIN P2_11 // J8-5
#endif
//
// Misc. Functions
//
#define PS_ON_PIN P0_25 // TH3 Connector
#define PS_ON_PIN P0_25 // TH3 Connector
//
// Ethernet pins
//
#ifndef ULTIPANEL
#define ENET_MDIO P1_17 // J12-4
#define ENET_RX_ER P1_14 // J12-6
#define ENET_RXD1 P1_10 // J12-8
#define ENET_MDIO P1_17 // J12-4
#define ENET_RX_ER P1_14 // J12-6
#define ENET_RXD1 P1_10 // J12-8
#endif
#define ENET_MOC P1_16 // J12-3
#define REF_CLK P1_15 // J12-5
#define ENET_RXD0 P1_09 // J12-7
#define ENET_CRS P1_08 // J12-9
#define ENET_TX_EN P1_04 // J12-10
#define ENET_TXD0 P1_00 // J12-11
#define ENET_TXD1 P1_01 // J12-12
#define ENET_MOC P1_16 // J12-3
#define REF_CLK P1_15 // J12-5
#define ENET_RXD0 P1_09 // J12-7
#define ENET_CRS P1_08 // J12-9
#define ENET_TX_EN P1_04 // J12-10
#define ENET_TXD0 P1_00 // J12-11
#define ENET_TXD1 P1_01 // J12-12
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(CUSTOM_CABLE)
@ -189,27 +189,27 @@
* If you can't find a pin to use for the LCD's SD_DETECT then comment out
* SD_DETECT_PIN entirely and remove that wire from the the custom cable.
*/
#define SD_DETECT_PIN P2_11 // J8-5 (moved from EXP2 P0.27)
#define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7)
#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8)
#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9)
#define SS_PIN P0_28
#define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the
// selected pins are not on a hardware SPI controller
#define SD_DETECT_PIN P2_11 // J8-5 (moved from EXP2 P0.27)
#define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7)
#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8)
#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9)
#define SS_PIN P0_28
#define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the
// selected pins are not on a hardware SPI controller
#elif SD_CONNECTION_IS(LCD)
// use standard cable and header, SPI and SD detect sre shared with on-board SD card
// hardware SPI is used for both SD cards. The detect pin is shred between the
// LCD and onboard SD readers so we disable it.
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN P0_28
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN P0_28
#elif SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#endif
/**
@ -226,17 +226,17 @@
*/
#if HAS_SPI_LCD
#define BEEPER_PIN P1_31 // EXP1.1
#define BTN_ENC P1_30 // EXP1.2
#define BTN_EN1 P3_26 // EXP2.5
#define BTN_EN2 P3_25 // EXP2.3
#define LCD_PINS_RS P0_16 // EXP1.4
#define LCD_SDSS P0_28 // EXP2.4
#define LCD_PINS_ENABLE P0_18 // EXP1.3
#define LCD_PINS_D4 P0_15 // EXP1.5
#define BEEPER_PIN P1_31 // EXP1.1
#define BTN_ENC P1_30 // EXP1.2
#define BTN_EN1 P3_26 // EXP2.5
#define BTN_EN2 P3_25 // EXP2.3
#define LCD_PINS_RS P0_16 // EXP1.4
#define LCD_SDSS P0_28 // EXP2.4
#define LCD_PINS_ENABLE P0_18 // EXP1.3
#define LCD_PINS_D4 P0_15 // EXP1.5
#if ANY(VIKI2, miniVIKI)
#define DOGLCD_SCK SCK_PIN
#define DOGLCD_MOSI MOSI_PIN
#define DOGLCD_SCK SCK_PIN
#define DOGLCD_MOSI MOSI_PIN
#endif
#if ENABLED(FYSETC_MINI_12864)
@ -251,26 +251,26 @@
* Pins 6, 7 & 8 on EXP2 are no connects. That means a second special
* cable will be needed if the RGB LEDs are to be active.
*/
#define DOGLCD_CS LCD_PINS_ENABLE // EXP1.3 (LCD_EN on FYSETC schematic)
#define DOGLCD_A0 LCD_PINS_RS // EXP1.4 (LCD_A0 on FYSETC schematic)
#define DOGLCD_SCK P2_11 // J8-5 (SCK on FYSETC schematic)
#define DOGLCD_MOSI P4_28 // J8-6 (MOSI on FYSETC schematic)
#define DOGLCD_CS LCD_PINS_ENABLE // EXP1.3 (LCD_EN on FYSETC schematic)
#define DOGLCD_A0 LCD_PINS_RS // EXP1.4 (LCD_A0 on FYSETC schematic)
#define DOGLCD_SCK P2_11 // J8-5 (SCK on FYSETC schematic)
#define DOGLCD_MOSI P4_28 // J8-6 (MOSI on FYSETC schematic)
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN P2_12 // J8-4 (LCD_D6 on FYSETC schematic)
#define RGB_LED_R_PIN P2_12 // J8-4 (LCD_D6 on FYSETC schematic)
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN P1_23 // J8-3 (LCD_D5 on FYSETC schematic)
#define RGB_LED_G_PIN P1_23 // J8-3 (LCD_D5 on FYSETC schematic)
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN P1_22 // J8-2 (LCD_D7 on FYSETC schematic)
#define RGB_LED_B_PIN P1_22 // J8-2 (LCD_D7 on FYSETC schematic)
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN P2_12
#define NEOPIXEL_PIN P2_12
#endif
#elif ENABLED(MINIPANEL)
@ -291,29 +291,29 @@
#if HAS_DRIVER(TMC2130)
// J8
#define X_CS_PIN P1_22
#define Y_CS_PIN P1_23
#define Z_CS_PIN P2_12
#define E0_CS_PIN P2_11
#define E1_CS_PIN P4_28
#define X_CS_PIN P1_22
#define Y_CS_PIN P1_23
#define Z_CS_PIN P2_12
#define E0_CS_PIN P2_11
#define E1_CS_PIN P4_28
// Hardware SPI is on EXP2. See if you can make it work:
// https://github.com/makerbase-mks/MKS-SBASE/issues/25
#define TMC_USE_SW_SPI
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P0_03 // AUX1
#define TMC_SW_MOSI P0_03 // AUX1
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P0_02 // AUX1
#define TMC_SW_MISO P0_02 // AUX1
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P0_26 // TH4
#define TMC_SW_SCK P0_26 // TH4
#endif
#endif
#endif
#if MB(MKS_SBASE) && HAS_TMC220x
#if MB(MKS_SBASE) && HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
@ -322,24 +322,24 @@
* Worst case you may have to give up the LCD
* RX pins need to be interrupt capable
*/
#define X_SERIAL_TX_PIN P1_22 // J8-2
#define X_SERIAL_RX_PIN P2_12 // J8-4 Interrupt Capable
#define Y_SERIAL_TX_PIN P1_23 // J8-3
#define Y_SERIAL_RX_PIN P2_11 // J8-5 Interrupt Capable
#define Z_SERIAL_TX_PIN P2_12 // J8-4
#define Z_SERIAL_RX_PIN P0_25 // TH3
#define E0_SERIAL_TX_PIN P4_28 // J8-6
#define E0_SERIAL_RX_PIN P0_26 // TH4
#define X_SERIAL_TX_PIN P1_22 // J8-2
#define X_SERIAL_RX_PIN P2_12 // J8-4 Interrupt Capable
#define Y_SERIAL_TX_PIN P1_23 // J8-3
#define Y_SERIAL_RX_PIN P2_11 // J8-5 Interrupt Capable
#define Z_SERIAL_TX_PIN P2_12 // J8-4
#define Z_SERIAL_RX_PIN P0_25 // TH3
#define E0_SERIAL_TX_PIN P4_28 // J8-6
#define E0_SERIAL_RX_PIN P0_26 // TH4
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
// UNUSED
#define PIN_P0_27 P0_27 // EXP2/Onboard SD
#define PIN_P0_28 P0_28 // EXP2
#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
#define PIN_P0_27 P0_27 // EXP2/Onboard SD
#define PIN_P0_28 P0_28 // EXP2
#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
/**
* PWMs

244
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
View file

@ -41,100 +41,100 @@
//
// Servos
//
#define SERVO0_PIN P1_23 // SERVO P1.23
#define SERVO1_PIN P2_00 // SERVO P2.0
#define SERVO0_PIN P1_23 // SERVO P1.23
#define SERVO1_PIN P2_00 // SERVO P2.0
//
// Trinamic Stallguard pins
//
#define X_DIAG_PIN P1_29 // X-
#define Y_DIAG_PIN P1_27 // Y-
#define Z_DIAG_PIN P1_25 // Z-
#define E0_DIAG_PIN P1_28 // X+
#define E1_DIAG_PIN P1_26 // Y+
#define X_DIAG_PIN P1_29 // X-
#define Y_DIAG_PIN P1_27 // Y-
#define Z_DIAG_PIN P1_25 // Z-
#define E0_DIAG_PIN P1_28 // X+
#define E1_DIAG_PIN P1_26 // Y+
//
// Limit Switches
//
#if X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#define X_MAX_PIN P1_28 // X+
#define X_MAX_PIN P1_28 // X+
#else
#define X_MIN_PIN P1_28 // X+
#define X_MIN_PIN P1_28 // X+
#endif
#else
#define X_MIN_PIN P1_29 // X-
#define X_MAX_PIN P1_28 // X+
#define X_MIN_PIN P1_29 // X-
#define X_MAX_PIN P1_28 // X+
#endif
#if Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#define Y_MAX_PIN P1_26 // Y+
#define Y_MAX_PIN P1_26 // Y+
#else
#define Y_MIN_PIN P1_26 // Y+
#define Y_MIN_PIN P1_26 // Y+
#endif
#else
#define Y_MIN_PIN P1_27 // Y-
#define Y_MAX_PIN P1_26 // Y+
#define Y_MIN_PIN P1_27 // Y-
#define Y_MAX_PIN P1_26 // Y+
#endif
#if Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#define Z_MAX_PIN P1_24 // Z+
#define Z_MAX_PIN P1_24 // Z+
#else
#define Z_MIN_PIN P1_24 // Z+
#define Z_MIN_PIN P1_24 // Z+
#endif
#else
#define Z_MIN_PIN P1_25 // Z-
#define Z_MAX_PIN P1_24 // Z+
#define Z_MIN_PIN P1_25 // Z-
#define Z_MAX_PIN P1_24 // Z+
#endif
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN P1_24
#define Z_MIN_PROBE_PIN P1_24
#endif
//
// Steppers
//
#define X_STEP_PIN P2_02
#define X_DIR_PIN P2_03
#define X_ENABLE_PIN P2_01
#define X_STEP_PIN P2_02
#define X_DIR_PIN P2_03
#define X_ENABLE_PIN P2_01
#ifndef X_CS_PIN
#define X_CS_PIN P1_01
#define X_CS_PIN P1_01
#endif
#define Y_STEP_PIN P0_19
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P2_08
#define Y_STEP_PIN P0_19
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P2_08
#ifndef Y_CS_PIN
#define Y_CS_PIN P1_08
#define Y_CS_PIN P1_08
#endif
#define Z_STEP_PIN P0_22
#define Z_DIR_PIN P2_11
#define Z_ENABLE_PIN P0_21
#define Z_STEP_PIN P0_22
#define Z_DIR_PIN P2_11
#define Z_ENABLE_PIN P0_21
#ifndef Z_CS_PIN
#define Z_CS_PIN P1_10
#define Z_CS_PIN P1_10
#endif
#define E0_STEP_PIN P2_13
#define E0_DIR_PIN P0_11
#define E0_ENABLE_PIN P2_12
#define E0_STEP_PIN P2_13
#define E0_DIR_PIN P0_11
#define E0_ENABLE_PIN P2_12
#ifndef E0_CS_PIN
#define E0_CS_PIN P1_15
#define E0_CS_PIN P1_15
#endif
#define E1_STEP_PIN P0_01
#define E1_DIR_PIN P0_00
#define E1_ENABLE_PIN P0_10
#define E1_STEP_PIN P0_01
#define E1_DIR_PIN P0_00
#define E1_ENABLE_PIN P0_10
#ifndef E1_CS_PIN
#define E1_CS_PIN P1_17
#define E1_CS_PIN P1_17
#endif
//
@ -142,17 +142,17 @@
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P4_28
#define TMC_SW_MOSI P4_28
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P0_05
#define TMC_SW_MISO P0_05
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P0_04
#define TMC_SW_SCK P0_04
#endif
#endif
#if HAS_TMC220x
#if HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
*
@ -175,23 +175,23 @@
// Software serial
//
#define X_SERIAL_TX_PIN P1_04
#define X_SERIAL_RX_PIN P1_01
#define X_SERIAL_TX_PIN P1_04
#define X_SERIAL_RX_PIN P1_01
#define Y_SERIAL_TX_PIN P1_09
#define Y_SERIAL_RX_PIN P1_08
#define Y_SERIAL_TX_PIN P1_09
#define Y_SERIAL_RX_PIN P1_08
#define Z_SERIAL_TX_PIN P1_14
#define Z_SERIAL_RX_PIN P1_10
#define Z_SERIAL_TX_PIN P1_14
#define Z_SERIAL_RX_PIN P1_10
#define E0_SERIAL_TX_PIN P1_16
#define E0_SERIAL_RX_PIN P1_15
#define E0_SERIAL_TX_PIN P1_16
#define E0_SERIAL_RX_PIN P1_15
#define E1_SERIAL_TX_PIN P4_29
#define E1_SERIAL_RX_PIN P1_17
#define E1_SERIAL_TX_PIN P4_29
#define E1_SERIAL_RX_PIN P1_17
#define Z2_SERIAL_TX_PIN P4_29
#define Z2_SERIAL_RX_PIN P1_17
#define Z2_SERIAL_TX_PIN P4_29
#define Z2_SERIAL_RX_PIN P1_17
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
@ -201,35 +201,35 @@
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_23_A0 // Analog Input A0 (TH1)
#define TEMP_BED_PIN P0_24_A1 // Analog Input A1 (TB)
#define TEMP_1_PIN P0_25_A2 // Analog Input A2 (TH2)
#define TEMP_0_PIN P0_23_A0 // Analog Input A0 (TH1)
#define TEMP_BED_PIN P0_24_A1 // Analog Input A1 (TB)
#define TEMP_1_PIN P0_25_A2 // Analog Input A2 (TH2)
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07
#if HOTENDS == 1
#ifndef FAN1_PIN
#define FAN1_PIN P2_06
#define FAN1_PIN P2_06
#endif
#else
#ifndef HEATER_1_PIN
#define HEATER_1_PIN P2_06
#define HEATER_1_PIN P2_06
#endif
#endif
#ifndef FAN_PIN
#define FAN_PIN P2_04
#define FAN_PIN P2_04
#endif
//
// Misc. Functions
//
#define LED_PIN P1_18 // Used as a status indicator
#define LED2_PIN P1_19
#define LED3_PIN P1_20
#define LED4_PIN P1_21
#define LED_PIN P1_18 // Used as a status indicator
#define LED2_PIN P1_19
#define LED3_PIN P1_20
#define LED4_PIN P1_21
/**
* _____ _____
@ -242,83 +242,83 @@
* EXP1 EXP2
*/
#if HAS_SPI_LCD
#define BEEPER_PIN P1_31
#define BTN_ENC P1_30
#define BEEPER_PIN P1_31
#define BTN_ENC P1_30
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS P1_00
#define LCD_PINS_RS P1_00
#define BTN_EN1 P0_18
#define BTN_EN2 P0_15
#define BTN_EN1 P0_18
#define BTN_EN2 P0_15
#define LCD_PINS_ENABLE P1_22
#define LCD_PINS_D4 P0_17
#define LCD_PINS_ENABLE P1_22
#define LCD_PINS_D4 P0_17
#else
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define LCD_SDSS P0_28
#define LCD_SDSS P0_28
#if ENABLED(MKS_12864OLED_SSD1306)
#define LCD_PINS_DC P0_17
#define DOGLCD_CS P0_16
#define DOGLCD_A0 LCD_PINS_DC
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define LCD_PINS_DC P0_17
#define DOGLCD_CS P0_16
#define DOGLCD_A0 LCD_PINS_DC
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define LCD_PINS_RS P1_00
#define LCD_PINS_D7 P1_22
#define KILL_PIN -1 // NC
#define LCD_PINS_RS P1_00
#define LCD_PINS_D7 P1_22
#define KILL_PIN -1 // NC
#else // !MKS_12864OLED_SSD1306
#else // !MKS_12864OLED_SSD1306
#define LCD_PINS_RS P0_16
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS P0_18
#define DOGLCD_A0 P0_16
#define DOGLCD_SCK P0_07
#define DOGLCD_MOSI P1_20
#define DOGLCD_CS P0_18
#define DOGLCD_A0 P0_16
#define DOGLCD_SCK P0_07
#define DOGLCD_MOSI P1_20
#define LCD_BACKLIGHT_PIN -1
#define LCD_BACKLIGHT_PIN -1
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN P0_15 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN P0_15 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN P0_17
#define RGB_LED_R_PIN P0_17
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN P1_00
#define RGB_LED_G_PIN P1_00
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN P1_22
#define RGB_LED_B_PIN P1_22
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN P0_17
#define NEOPIXEL_PIN P0_17
#endif
#else // !FYSETC_MINI_12864
#else // !FYSETC_MINI_12864
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P0_17
#define DOGLCD_A0 P1_00
#define DOGLCD_CS P0_17
#define DOGLCD_A0 P1_00
#endif
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 P0_17
#define LCD_PINS_D6 P1_00
#define LCD_PINS_D7 P1_22
#define LCD_PINS_D5 P0_17
#define LCD_PINS_D6 P1_00
#define LCD_PINS_D7 P1_22
#endif
#endif // !FYSETC_MINI_12864
@ -330,20 +330,20 @@
#endif // HAS_SPI_LCD
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#if SD_CONNECTION_IS(ONBOARD)
#define SS_PIN ONBOARD_SD_CS_PIN
#define SS_PIN ONBOARD_SD_CS_PIN
#else
#define SS_PIN P0_28
#define SS_PIN P0_28
#endif
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
@ -352,6 +352,6 @@
//
// Other Pins
//
//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
//#define PS_ON_PIN P1_23 // SERVO P1.23
//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0)
//#define PS_ON_PIN P1_23 // SERVO P1.23

318
Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
View file

@ -51,58 +51,58 @@
//
// Servos
//
#define SERVO0_PIN P1_20 // (11)
#define SERVO1_PIN P1_21 // ( 6) also on J5-1
#define SERVO2_PIN P1_19 // ( 5)
#define SERVO3_PIN P1_18 // ( 4) 5V output
#define SERVO0_PIN P1_20 // (11)
#define SERVO1_PIN P1_21 // ( 6) also on J5-1
#define SERVO2_PIN P1_19 // ( 5)
#define SERVO3_PIN P1_18 // ( 4) 5V output
//
// Limit Switches
//
#define X_MIN_PIN P1_24 // ( 3) 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 // ( 2) 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 // (14) 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 // (15) 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_29 // (18) 10k pullup to 3.3V, 1K series
#define Z_MAX_PIN P1_28 // (19) 10k pullup to 3.3V, 1K series
#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups
#define X_MIN_PIN P1_24 // ( 3) 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 // ( 2) 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 // (14) 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 // (15) 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_29 // (18) 10k pullup to 3.3V, 1K series
#define Z_MAX_PIN P1_28 // (19) 10k pullup to 3.3V, 1K series
#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups
//
// Steppers
//
#define X_STEP_PIN P2_01 // (54)
#define X_DIR_PIN P0_11 // (55)
#define X_ENABLE_PIN P0_10 // (38)
#define X_STEP_PIN P2_01 // (54)
#define X_DIR_PIN P0_11 // (55)
#define X_ENABLE_PIN P0_10 // (38)
#ifndef X_CS_PIN
#define X_CS_PIN P1_01 // ETH
#define X_CS_PIN P1_01 // ETH
#endif
#define Y_STEP_PIN P2_02 // (60)
#define Y_DIR_PIN P0_20 // (61)
#define Y_ENABLE_PIN P0_19 // (56)
#define Y_STEP_PIN P2_02 // (60)
#define Y_DIR_PIN P0_20 // (61)
#define Y_ENABLE_PIN P0_19 // (56)
#ifndef Y_CS_PIN
#define Y_CS_PIN P1_04 // ETH
#define Y_CS_PIN P1_04 // ETH
#endif
#define Z_STEP_PIN P2_03 // (46)
#define Z_DIR_PIN P0_22 // (48)
#define Z_ENABLE_PIN P0_21 // (62)
#define Z_STEP_PIN P2_03 // (46)
#define Z_DIR_PIN P0_22 // (48)
#define Z_ENABLE_PIN P0_21 // (62)
#ifndef Z_CS_PIN
#define Z_CS_PIN P1_10 // ETH
#define Z_CS_PIN P1_10 // ETH
#endif
#define E0_STEP_PIN P2_00 // (26)
#define E0_DIR_PIN P0_05 // (28)
#define E0_ENABLE_PIN P0_04 // (24)
#define E0_STEP_PIN P2_00 // (26)
#define E0_DIR_PIN P0_05 // (28)
#define E0_ENABLE_PIN P0_04 // (24)
#ifndef E0_CS_PIN
#define E0_CS_PIN P1_14 // ETH
#define E0_CS_PIN P1_14 // ETH
#endif
#define E1_STEP_PIN P2_08 // (36)
#define E1_DIR_PIN P2_13 // (34)
#define E1_ENABLE_PIN P4_29 // (30)
#define E1_STEP_PIN P2_08 // (36)
#define E1_DIR_PIN P2_13 // (34)
#define E1_ENABLE_PIN P4_29 // (30)
#ifndef E1_CS_PIN
#define E1_CS_PIN -1
#define E1_CS_PIN -1
#endif
//
@ -110,17 +110,17 @@
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P1_00 // ETH
#define TMC_SW_MOSI P1_00 // ETH
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P1_08 // ETH
#define TMC_SW_MISO P1_08 // ETH
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P1_09 // ETH
#define TMC_SW_SCK P1_09 // ETH
#endif
#endif
#if HAS_TMC220x
#if HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
*
@ -136,31 +136,31 @@
// P2_13 E1-Dir
#ifndef X_SERIAL_TX_PIN
#define X_SERIAL_TX_PIN P0_01
#define X_SERIAL_TX_PIN P0_01
#endif
#ifndef X_SERIAL_RX_PIN
#define X_SERIAL_RX_PIN P0_01
#define X_SERIAL_RX_PIN P0_01
#endif
#ifndef Y_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN P0_00
#define Y_SERIAL_TX_PIN P0_00
#endif
#ifndef Y_SERIAL_RX_PIN
#define Y_SERIAL_RX_PIN P0_00
#define Y_SERIAL_RX_PIN P0_00
#endif
#ifndef Z_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN P2_13
#define Z_SERIAL_TX_PIN P2_13
#endif
#ifndef Z_SERIAL_RX_PIN
#define Z_SERIAL_RX_PIN P2_13
#define Z_SERIAL_RX_PIN P2_13
#endif
#ifndef E0_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN P2_08
#define E0_SERIAL_TX_PIN P2_08
#endif
#ifndef E0_SERIAL_RX_PIN
#define E0_SERIAL_RX_PIN P2_08
#define E0_SERIAL_RX_PIN P2_08
#endif
// Reduce baud rate to improve software serial reliability
@ -171,14 +171,14 @@
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_0_PIN
#define TEMP_BED_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_BED_PIN
#define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN
#define TEMP_2_PIN P0_26_A3 // A3 - (63) - J5-3 & AUX-2
#define TEMP_3_PIN P1_30_A4 // A4 - (37) - BUZZER_PIN
//#define TEMP_4_PIN P1_31_A5 // A5 - (49) - SD_DETECT_PIN
#define TEMP_0_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_0_PIN
#define TEMP_BED_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_BED_PIN
#define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN
#define TEMP_2_PIN P0_26_A3 // A3 - (63) - J5-3 & AUX-2
#define TEMP_3_PIN P1_30_A4 // A4 - (37) - BUZZER_PIN
//#define TEMP_4_PIN P1_31_A5 // A5 - (49) - SD_DETECT_PIN
//#define ?? P0_03_A6 // A6 - ( 0) - RXD0 - J4-4 & AUX-1
#define FILWIDTH_PIN P0_02_A7 // A7 - ( 1) - TXD0 - J4-5 & AUX-1
#define FILWIDTH_PIN P0_02_A7 // A7 - ( 1) - TXD0 - J4-5 & AUX-1
//
// Augmentation for auto-assigning RAMPS plugs
@ -201,69 +201,69 @@
// Heaters / Fans
//
#ifndef MOSFET_D_PIN
#define MOSFET_D_PIN -1
#define MOSFET_D_PIN -1
#endif
#ifndef RAMPS_D8_PIN
#define RAMPS_D8_PIN P2_07 // (8)
#define RAMPS_D8_PIN P2_07 // (8)
#endif
#ifndef RAMPS_D9_PIN
#define RAMPS_D9_PIN P2_04 // (9)
#define RAMPS_D9_PIN P2_04 // (9)
#endif
#ifndef RAMPS_D10_PIN
#define RAMPS_D10_PIN P2_05 // (10)
#define RAMPS_D10_PIN P2_05 // (10)
#endif
#define HEATER_0_PIN RAMPS_D10_PIN
#define HEATER_0_PIN RAMPS_D10_PIN
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN RAMPS_D9_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
#define FAN1_PIN RAMPS_D8_PIN
#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
#define HEATER_BED_PIN RAMPS_D8_PIN
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN RAMPS_D9_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
#define FAN1_PIN RAMPS_D8_PIN
#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
#define HEATER_BED_PIN RAMPS_D8_PIN
#if HOTENDS == 1
#define FAN1_PIN MOSFET_D_PIN
#define FAN1_PIN MOSFET_D_PIN
#else
#define HEATER_1_PIN MOSFET_D_PIN
#define HEATER_1_PIN MOSFET_D_PIN
#endif
#endif
#ifndef FAN_PIN
#if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#define FAN_PIN RAMPS_D9_PIN
#elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define FAN_PIN P1_18 // (4) IO pin. Buffer needed
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define FAN_PIN P1_18 // (4) IO pin. Buffer needed
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#endif
#endif
//
// Misc. Functions
//
#define LED_PIN P4_28 // (13)
#define LED_PIN P4_28 // (13)
// define digital pin 5 for the filament runout sensor. Use the RAMPS 1.4 digital input 5 on the servos connector
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN P1_19 // (5)
#define FIL_RUNOUT_PIN P1_19 // (5)
#endif
#define PS_ON_PIN P2_12 // (12)
#define PS_ON_PIN P2_12 // (12)
#if !defined(MAX6675_SS_PIN) && DISABLED(USE_ZMAX_PLUG)
#define MAX6675_SS_PIN P1_28
#define MAX6675_SS_PIN P1_28
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENA_PIN)
#if !defined(NUM_SERVOS) || NUM_SERVOS < 4 // Try to use servo connector
#define CASE_LIGHT_PIN P1_18 // (4) MUST BE HARDWARE PWM
#if !defined(NUM_SERVOS) || NUM_SERVOS < 4 // Try to use servo connector
#define CASE_LIGHT_PIN P1_18 // (4) MUST BE HARDWARE PWM
#endif
#endif
@ -279,19 +279,19 @@
#error "LASER_FEATURE requires 3 free servo pins."
#endif
#endif
#define SPINDLE_LASER_ENA_PIN SERVO1_PIN // (6) Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN SERVO3_PIN // (4) MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN SERVO2_PIN // (5)
#define SPINDLE_LASER_ENA_PIN SERVO1_PIN // (6) Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN SERVO3_PIN // (4) MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN SERVO2_PIN // (5)
#endif
//
// Průša i3 MK2 Multiplexer Support
//
#if SERIAL_PORT != 0 && SERIAL_PORT_2 != 0
#define E_MUX0_PIN P0_03 // ( 0) Z_CS_PIN
#define E_MUX1_PIN P0_02 // ( 1) E0_CS_PIN
#define E_MUX0_PIN P0_03 // ( 0) Z_CS_PIN
#define E_MUX1_PIN P0_02 // ( 1) E0_CS_PIN
#endif
#define E_MUX2_PIN P0_26 // (63) E1_CS_PIN
#define E_MUX2_PIN P0_26 // (63) E1_CS_PIN
/**
* LCD / Controller
@ -322,101 +322,101 @@
// 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
// Requires REVERSE_ENCODER_DIRECTION in Configuration.h
#define BEEPER_PIN P2_11 // J3-3 & AUX-4
#define BEEPER_PIN P2_11 // J3-3 & AUX-4
#define BTN_EN1 P0_16 // J3-7 & AUX-4
#define BTN_EN2 P1_23 // J3-5 & AUX-4
#define BTN_ENC P3_25 // J3-4 & AUX-4
#define BTN_EN1 P0_16 // J3-7 & AUX-4
#define BTN_EN2 P1_23 // J3-5 & AUX-4
#define BTN_ENC P3_25 // J3-4 & AUX-4
#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
#elif HAS_SPI_LCD
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
#if ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN P1_01
#define BTN_ENC P1_04
#define BEEPER_PIN P1_01
#define BTN_ENC P1_04
#else
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#endif
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
#if ENABLED(NEWPANEL)
#if ENABLED(REPRAPWORLD_KEYPAD)
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
#define SHIFT_LD P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
#define SHIFT_LD P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#endif
#else
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
#endif
#if ANY(VIKI2, miniVIKI)
// #define LCD_SCREEN_ROT_180
#define DOGLCD_CS P0_16 // (16)
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_SCK SCK_PIN
#define DOGLCD_MOSI MOSI_PIN
#define DOGLCD_CS P0_16 // (16)
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_SCK SCK_PIN
#define DOGLCD_MOSI MOSI_PIN
#define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
#define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
#else
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
// EXP1 on LCD adapter is not usable - using Ethernet connector instead
#define DOGLCD_CS P1_09
#define DOGLCD_A0 P1_14
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define DOGLCD_CS P1_09
#define DOGLCD_A0 P1_14
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN P0_16 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN P0_16 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN P1_00
#define RGB_LED_R_PIN P1_00
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN P1_01
#define RGB_LED_G_PIN P1_01
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN P1_08
#define RGB_LED_B_PIN P1_08
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN P1_00
#define NEOPIXEL_PIN P1_00
#endif
#else
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#endif
#define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
#define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
#endif
#endif
@ -434,38 +434,38 @@
// Ethernet pins
//
#if DISABLED(ULTIPANEL)
#define ENET_MDIO P1_17 // (71) J12-4
#define ENET_RX_ER P1_14 // (73) J12-6
#define ENET_RXD1 P1_10 // (75) J12-8
#define ENET_MDIO P1_17 // (71) J12-4
#define ENET_RX_ER P1_14 // (73) J12-6
#define ENET_RXD1 P1_10 // (75) J12-8
#endif
#define ENET_MOC P1_16 // (70) J12-3
#define REF_CLK P1_15 // (72) J12-5
#define ENET_RXD0 P1_09 // (74) J12-7
#define ENET_CRS P1_08 // (76) J12-9
#define ENET_TX_EN P1_04 // (77) J12-10
#define ENET_TXD0 P1_00 // (78) J12-11
#define ENET_TXD1 P1_01 // (79) J12-12
#define ENET_MOC P1_16 // (70) J12-3
#define REF_CLK P1_15 // (72) J12-5
#define ENET_RXD0 P1_09 // (74) J12-7
#define ENET_CRS P1_08 // (76) J12-9
#define ENET_TX_EN P1_04 // (77) J12-10
#define ENET_TXD0 P1_00 // (78) J12-11
#define ENET_TXD1 P1_01 // (79) J12-12
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif

87
Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h
View file

@ -41,80 +41,79 @@
//
// Servos
//
#define SERVO0_PIN P1_23
#define SERVO0_PIN P1_23
//
// Limit Switches
//
#define X_MIN_PIN P1_28
#define X_MAX_PIN P1_25
#define Y_MIN_PIN P2_11
#define Y_MAX_PIN -1
#define Z_MIN_PIN P1_27
#define Z_MAX_PIN -1
#define Z_PROBE P1_22
#define X_MIN_PIN P1_28
#define X_MAX_PIN P1_25
#define Y_MIN_PIN P2_11
#define Y_MAX_PIN -1
#define Z_MIN_PIN P1_27
#define Z_MAX_PIN -1
#define Z_PROBE P1_22
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
#define TEMP_0_PIN P0_24_A1 // A1 (TH2)
#define TEMP_1_PIN P0_25_A2 // A2 (TH3)
#define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
#define TEMP_0_PIN P0_24_A1 // A1 (TH2)
#define TEMP_1_PIN P0_25_A2 // A2 (TH3)
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_BED2_PIN P2_04
#define HEATER_0_PIN P2_07
#define HEATER_1_PIN P2_06
#define HEATER_BED_PIN P2_05
#define HEATER_BED2_PIN P2_04
#define HEATER_0_PIN P2_07
#define HEATER_1_PIN P2_06
#ifndef FAN_PIN
#define FAN_PIN P1_24
#define FAN_PIN P1_24
#endif
#define FAN1_PIN P1_26
#define FAN1_PIN P1_26
//
// Display
//
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define LCD_PINS_D5 P1_00
#define LCD_PINS_D6 P1_01
#define LCD_PINS_D7 P1_04
#define BEEPER_PIN P1_31
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define LCD_PINS_D5 P1_00
#define LCD_PINS_D6 P1_01
#define LCD_PINS_D7 P1_04
#define BEEPER_PIN P1_31
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_ENC P1_30
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_ENC P1_30
#define SD_DETECT_PIN -1
#define SD_DETECT_PIN -1
#endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

91
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h
View file

@ -41,93 +41,92 @@
//
// Servos
//
#define SERVO0_PIN P1_23
#define SERVO0_PIN P1_23
//
// Limit Switches
//
#define X_MIN_PIN P1_24
#define X_MAX_PIN P1_27
#define Y_MIN_PIN P1_25
#define Y_MAX_PIN P1_28
#define Z_MIN_PIN P1_26
#define Z_MAX_PIN P1_29
#define X_MIN_PIN P1_24
#define X_MAX_PIN P1_27
#define Y_MIN_PIN P1_25
#define Y_MAX_PIN P1_28
#define Z_MIN_PIN P1_26
#define Z_MAX_PIN P1_29
//
// Steppers
//
#define X_STEP_PIN P2_01
#define X_DIR_PIN P0_11
#define X_ENABLE_PIN P0_10
#define X_STEP_PIN P2_01
#define X_DIR_PIN P0_11
#define X_ENABLE_PIN P0_10
#ifndef X_CS_PIN
#define X_CS_PIN P0_10 // BSD2660 default
#define X_CS_PIN P0_10 // BSD2660 default
#endif
#define Y_STEP_PIN P2_02
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P0_19
#define Y_STEP_PIN P2_02
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P0_19
#ifndef Y_CS_PIN
#define Y_CS_PIN P0_19 // BSD2660 default
#define Y_CS_PIN P0_19 // BSD2660 default
#endif
#define Z_STEP_PIN P2_03
#define Z_DIR_PIN P0_22
#define Z_ENABLE_PIN P0_21
#define Z_STEP_PIN P2_03
#define Z_DIR_PIN P0_22
#define Z_ENABLE_PIN P0_21
#ifndef Z_CS_PIN
#define Z_CS_PIN P0_21 // BSD2660 default
#define Z_CS_PIN P0_21 // BSD2660 default
#endif
#define E0_STEP_PIN P2_00
#define E0_DIR_PIN P0_05
#define E0_ENABLE_PIN P0_04
#define E0_STEP_PIN P2_00
#define E0_DIR_PIN P0_05
#define E0_ENABLE_PIN P0_04
#ifndef E0_CS_PIN
#define E0_CS_PIN P0_04 // BSD2660 default
#define E0_CS_PIN P0_04 // BSD2660 default
#endif
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#ifndef E1_CS_PIN
#define E1_CS_PIN P4_29 // BSD2660 default
#define E1_CS_PIN P4_29 // BSD2660 default
#endif
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
#define TEMP_0_PIN P0_24_A1 // A1 (TH2)
#define TEMP_1_PIN P0_25_A2 // A2 (TH3)
#define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
#define TEMP_0_PIN P0_24_A1 // A1 (TH2)
#define TEMP_1_PIN P0_25_A2 // A2 (TH3)
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_07
#define HEATER_0_PIN P2_04
#define HEATER_1_PIN P2_05
#define HEATER_BED_PIN P2_07
#define HEATER_0_PIN P2_04
#define HEATER_1_PIN P2_05
#ifndef FAN_PIN
#define FAN_PIN P0_26
#define FAN_PIN P0_26
#endif
#define FAN1_PIN P1_22
#define FAN1_PIN P1_22
//
// Display
//
#if ANY(VIKI2, miniVIKI)
#define BEEPER_PIN P1_31
#define DOGLCD_A0 P2_06
#define DOGLCD_CS P0_16
#define BEEPER_PIN P1_31
#define DOGLCD_A0 P2_06
#define DOGLCD_CS P0_16
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_ENC P2_11
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_ENC P2_11
#define SD_DETECT_PIN P1_18
#define SDSS P1_21
#define SD_DETECT_PIN P1_18
#define SDSS P1_21
#define STAT_LED_RED_PIN P1_19
#define STAT_LED_BLUE_PIN P1_20
#define STAT_LED_RED_PIN P1_19
#define STAT_LED_BLUE_PIN P1_20
#endif

146
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
View file

@ -37,74 +37,74 @@
//
// LED
//
#define LED_PIN P1_18
#define LED_PIN P1_18
//
// Servos
//
#define SERVO0_PIN P1_29
#define SERVO0_PIN P1_29
//
// Limit Switches
//
#define X_STOP_PIN P1_24
#define Y_STOP_PIN P1_26
#define Z_STOP_PIN P1_28
#define X_STOP_PIN P1_24
#define Y_STOP_PIN P1_26
#define Z_STOP_PIN P1_28
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN P2_04
#define FIL_RUNOUT_PIN P2_04
#endif
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN P0_25_A2 // Analog Input (P0_25)
#define FILWIDTH_PIN P0_25_A2 // Analog Input (P0_25)
#endif
//
// Steppers
//
#define X_STEP_PIN P2_01
#define X_DIR_PIN P0_11
#define X_ENABLE_PIN P0_10
#define X_STEP_PIN P2_01
#define X_DIR_PIN P0_11
#define X_ENABLE_PIN P0_10
#define Y_STEP_PIN P2_02
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P0_19
#define Y_STEP_PIN P2_02
#define Y_DIR_PIN P0_20
#define Y_ENABLE_PIN P0_19
#define Z_STEP_PIN P2_03
#define Z_DIR_PIN P0_22
#define Z_ENABLE_PIN P0_21
#define Z_STEP_PIN P2_03
#define Z_DIR_PIN P0_22
#define Z_ENABLE_PIN P0_21
#define E0_STEP_PIN P2_00
#define E0_DIR_PIN P0_05
#define E0_ENABLE_PIN P0_04
#define E0_STEP_PIN P2_00
#define E0_DIR_PIN P0_05
#define E0_ENABLE_PIN P0_04
//
// DIGIPOT slave addresses
//
#ifndef DIGIPOT_I2C_ADDRESS_A
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT
#endif
#ifndef DIGIPOT_I2C_ADDRESS_B
#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT
#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT
#endif
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
#define TEMP_0_PIN P0_24_A1 // A1 (TH2)
#define TEMP_BED_PIN P0_23_A0 // A0 (TH1)
#define TEMP_0_PIN P0_24_A1 // A1 (TH2)
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_07
#define HEATER_0_PIN P2_05
#define HEATER_BED_PIN P2_07
#define HEATER_0_PIN P2_05
#ifndef FAN_PIN
#define FAN_PIN P0_26
#define FAN_PIN P0_26
#endif
#define FAN1_PIN P1_25
#define FAN1_PIN P1_25
//
// Display
@ -118,61 +118,61 @@
// 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
// Requires REVERSE_ENCODER_DIRECTION in Configuration.h
#define BEEPER_PIN P2_11 // J3-3 & AUX-4
#define BEEPER_PIN P2_11 // J3-3 & AUX-4
#define BTN_EN1 P0_16 // J3-7 & AUX-4
#define BTN_EN2 P1_23 // J3-5 & AUX-4
#define BTN_ENC P3_25 // J3-4 & AUX-4
#define BTN_EN1 P0_16 // J3-7 & AUX-4
#define BTN_EN2 P1_23 // J3-5 & AUX-4
#define BTN_ENC P3_25 // J3-4 & AUX-4
#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
#define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
#else
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
#elif DISABLED(NEWPANEL)
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
#endif
#if ANY(VIKI2, miniVIKI)
//#define LCD_SCREEN_ROT_180
#define BEEPER_PIN P1_30 // (37) may change if cable changes
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_SCK SCK_PIN
#define DOGLCD_MOSI MOSI_PIN
#define BEEPER_PIN P1_30 // (37) may change if cable changes
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_SCK SCK_PIN
#define DOGLCD_MOSI MOSI_PIN
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
#else
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
#endif
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define DOGLCD_CS P0_16 // (16)
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define DOGLCD_CS P0_16 // (16)
#endif
#if ENABLED(MINIPANEL)
@ -199,22 +199,22 @@
// SD Support
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SS_PIN P1_23
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SS_PIN P1_23
#elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif

116
Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h
View file

@ -40,53 +40,53 @@
//
// Servos
//
#define SERVO0_PIN P1_23
#define SERVO0_PIN P1_23
//
// Limit Switches
//
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
//
// Default pins for TMC software SPI
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
#endif
#endif
@ -94,42 +94,42 @@
// Analog Inputs
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_23_A0 // P0_23
#define TEMP_BED_PIN P0_24_A1 // P0_24
#define TEMP_0_PIN P0_23_A0 // P0_23
#define TEMP_BED_PIN P0_24_A1 // P0_24
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1
#ifndef FAN_PIN
#define FAN_PIN P2_06 // FET 3
#define FAN_PIN P2_06 // FET 3
#endif
//
// Auto fans
//
#define AUTO_FAN_PIN P2_04 // FET 4
#define AUTO_FAN_PIN P2_04 // FET 4
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
//
// Misc. Functions
//
#define LED_PIN P4_28 // Play LED
#define LED_PIN P4_28 // Play LED
//
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER
#undef HEATER_0_PIN
#define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
#define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
#undef HEATER_BED_PIN
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#undef FAN_PIN
#define SPINDLE_DIR_PIN P2_06 // FET 3
#define SPINDLE_DIR_PIN P2_06 // FET 3
#endif
//
@ -144,18 +144,18 @@
//
#if HAS_SPI_LCD
#define BEEPER_PIN P0_27 // EXP2-7 - open drain
#define BEEPER_PIN P0_27 // EXP2-7 - open drain
#define BTN_EN1 P3_26 // EXP2-5
#define BTN_EN2 P3_25 // EXP2-3
#define BTN_ENC P1_30 // EXP1-2
#define BTN_EN1 P3_26 // EXP2-5
#define BTN_EN2 P3_25 // EXP2-3
#define BTN_ENC P1_30 // EXP1-2
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_SDSS P0_28 // EXP2-4
#define LCD_PINS_ENABLE P0_18 // EXP1-3
#define LCD_PINS_D4 P0_15 // EXP1-5
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_SDSS P0_28 // EXP2-4
#define LCD_PINS_ENABLE P0_18 // EXP1-3
#define LCD_PINS_D4 P0_15 // EXP1-5
#define KILL_PIN P2_11 // EXP2-10
#define KILL_PIN P2_11 // EXP2-10
#if ENABLED(SDSUPPORT)
#error "SDSUPPORT is not currently supported by the Cohesion3D boards"
@ -166,13 +166,13 @@
//
// Ethernet pins
//
#define ENET_MDIO P1_17
#define ENET_RX_ER P1_14
#define ENET_RXD1 P1_10
#define ENET_MOC P1_16
#define REF_CLK P1_15
#define ENET_RXD0 P1_09
#define ENET_CRS P1_08
#define ENET_TX_EN P1_04
#define ENET_TXD0 P1_00
#define ENET_TXD1 P1_01
#define ENET_MDIO P1_17
#define ENET_RX_ER P1_14
#define ENET_RXD1 P1_10
#define ENET_MOC P1_16
#define REF_CLK P1_15
#define ENET_RXD0 P1_09
#define ENET_CRS P1_08
#define ENET_TX_EN P1_04
#define ENET_TXD0 P1_00
#define ENET_TXD1 P1_01

196
Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h
View file

@ -40,70 +40,70 @@
//
// Servos
//
#define SERVO0_PIN P2_04
#define SERVO0_PIN P2_04
//
// Limit Switches
//
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN P1_29
#define Z_MIN_PROBE_PIN P1_29
#endif
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14
#define E2_STEP_PIN P1_20
#define E2_DIR_PIN P1_19
#define E2_ENABLE_PIN P1_21
#define E2_CS_PIN P1_18 // FET 6
#define E2_STEP_PIN P1_20
#define E2_DIR_PIN P1_19
#define E2_ENABLE_PIN P1_21
#define E2_CS_PIN P1_18 // FET 6
//
// Default pins for TMC software SPI
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
#endif
#endif
@ -111,42 +111,42 @@
// Analog Inputs
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_23_A0
#define TEMP_BED_PIN P0_24_A1
#define TEMP_1_PIN P0_25_A2
#define TEMP_0_PIN P0_23_A0
#define TEMP_BED_PIN P0_24_A1
#define TEMP_1_PIN P0_25_A2
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILWIDTH_PIN P0_26_A3
#define FILWIDTH_PIN P0_26_A3
#else
#define TEMP_2_PIN P0_26_A3
#define TEMP_2_PIN P0_26_A3
#endif
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1
#define HEATER_1_PIN P1_23 // FET 2
#define HEATER_2_PIN P1_22 // FET 3
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1
#define HEATER_1_PIN P1_23 // FET 2
#define HEATER_2_PIN P1_22 // FET 3
#ifndef FAN_PIN
#define FAN_PIN P2_06 // FET 4
#define FAN_PIN P2_06 // FET 4
#endif
//
// Auto fans
//
#if HOTENDS == 3
#define AUTO_FAN_PIN P1_18 // FET 6
#define AUTO_FAN_PIN P1_18 // FET 6
#else
#define AUTO_FAN_PIN P1_22 // FET 3
#define AUTO_FAN_PIN P1_22 // FET 3
#endif
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
//
// Misc. Functions
//
#define LED_PIN P4_28 // Play LED
#define LED_PIN P4_28 // Play LED
//
// M3/M4/M5 - Spindle/Laser Control
@ -155,9 +155,9 @@
#undef HEATER_0_PIN
#undef HEATER_BED_PIN
#undef FAN_PIN
#define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#define SPINDLE_DIR_PIN P2_06 // FET 4
#define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#define SPINDLE_DIR_PIN P2_06 // FET 4
#endif
//
@ -173,54 +173,54 @@
#if ENABLED(FYSETC_MINI_12864)
#define FORCE_SOFT_SPI // REQUIRED - results in LCD soft SPI mode 3
#define FORCE_SOFT_SPI // REQUIRED - results in LCD soft SPI mode 3
#define BEEPER_PIN P1_31 // EXP1-1
#define BTN_ENC P1_30 // EXP1-2
#define DOGLCD_CS P0_18 // EXP1-3
#define DOGLCD_A0 P0_16 // EXP1-4
#define LCD_RESET_PIN P0_15 // EXP1-5
#define BEEPER_PIN P1_31 // EXP1-1
#define BTN_ENC P1_30 // EXP1-2
#define DOGLCD_CS P0_18 // EXP1-3
#define DOGLCD_A0 P0_16 // EXP1-4
#define LCD_RESET_PIN P0_15 // EXP1-5
// A custom cable is REQUIRED for EXP2 cable because the SCK & MOSI on the card's EXP2 are dedicated
// to the onboard SD card. All required EXP2 signals come from the Ethernet connector. Pin 1 of this
// connector is the one nearest the motor power connector.
#define DOGLCD_SCK P1_17 // EXP2-2 => Ethernet pin 5 (bottom, 3 from left)
#define BTN_EN2 P1_09 // EXP2-3 => Ethernet pin 9 (bottom, 5 from left)
#define BTN_EN1 P1_04 // EXP2-5 => Ethernet pin 11 (bottom, 6 from left)
#define DOGLCD_MOSI P1_01 // EXP2-6 => Ethernet pin 13 (bottom, 7 from left)
#define DOGLCD_SCK P1_17 // EXP2-2 => Ethernet pin 5 (bottom, 3 from left)
#define BTN_EN2 P1_09 // EXP2-3 => Ethernet pin 9 (bottom, 5 from left)
#define BTN_EN1 P1_04 // EXP2-5 => Ethernet pin 11 (bottom, 6 from left)
#define DOGLCD_MOSI P1_01 // EXP2-6 => Ethernet pin 13 (bottom, 7 from left)
// A custom EXP1 cable is required colored LEDs. Pins 1-5, 9, 10 of the cable go to pins 1-5, 9, 10
// on the board's EXP1 connector. Pins 6, 7, and 8 of the EXP1 cable go to the Ethernet connector.
// Rev 1.2 displays do NOT require the RGB LEDs. 2.0 and 2.1 displays do require RGB.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
#define RGB_LED_R_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN P1_10 // EXP1-7 => Ethernet pin 10 (top row, 5 from left)
#define RGB_LED_G_PIN P1_10 // EXP1-7 => Ethernet pin 10 (top row, 5 from left)
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN P1_00 // EXP1-8 => Ethernet pin 12 (top row, 6 from left)
#define RGB_LED_B_PIN P1_00 // EXP1-8 => Ethernet pin 12 (top row, 6 from left)
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
#define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
#endif
#elif HAS_SPI_LCD
#define BEEPER_PIN P1_31 // EXP1-1
//#define SD_DETECT_PIN P0_27 // EXP2-7
#define BEEPER_PIN P1_31 // EXP1-1
//#define SD_DETECT_PIN P0_27 // EXP2-7
#define BTN_EN1 P3_26 // EXP2-5
#define BTN_EN2 P3_25 // EXP2-3
#define BTN_ENC P1_30 // EXP1-2
#define BTN_EN1 P3_26 // EXP2-5
#define BTN_EN2 P3_25 // EXP2-3
#define BTN_ENC P1_30 // EXP1-2
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_SDSS P0_28 // EXP2-4
#define LCD_PINS_ENABLE P0_18 // EXP1-3
#define LCD_PINS_D4 P0_15 // EXP1-5
#define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_SDSS P0_28 // EXP2-4
#define LCD_PINS_ENABLE P0_18 // EXP1-3
#define LCD_PINS_D4 P0_15 // EXP1-5
#define KILL_PIN P2_11 // EXP2-10
#define KILL_PIN P2_11 // EXP2-10
#endif // HAS_SPI_LCD
@ -228,22 +228,22 @@
// SD Support
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#define SDCARD_CONNECTION ONBOARD
#endif
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
@ -251,16 +251,16 @@
//
// Ethernet pins
//
//#define ENET_MDIO P1_17 // Ethernet pin 5 (bottom, 3 from left)
//#define ENET_RX_ER P1_14
//#define ENET_RXD1 P1_10 // Ethernet pin 10 (top row, 5 from left)
//#define ENET_MOC P1_16 // Ethernet pin 6 (top row, 3 from left)
//#define REF_CLK P1_15
//#define ENET_RXD0 P1_09 // Ethernet pin 9 (bottom, 5 from left)
//#define ENET_CRS P1_08 // Ethernet pin 8 (top row, 4 from left) - INPUT ONLY
//#define ENET_TX_EN P1_04 // Ethernet pin 11 (bottom, 6 from left)
//#define ENET_TXD0 P1_00 // Ethernet pin 12 (top row, 6 from left)
//#define ENET_TXD1 P1_01 // Ethernet pin 13 (bottom, 7 from left)
//#define ENET_MDIO P1_17 // Ethernet pin 5 (bottom, 3 from left)
//#define ENET_RX_ER P1_14
//#define ENET_RXD1 P1_10 // Ethernet pin 10 (top row, 5 from left)
//#define ENET_MOC P1_16 // Ethernet pin 6 (top row, 3 from left)
//#define REF_CLK P1_15
//#define ENET_RXD0 P1_09 // Ethernet pin 9 (bottom, 5 from left)
//#define ENET_CRS P1_08 // Ethernet pin 8 (top row, 4 from left) - INPUT ONLY
//#define ENET_TX_EN P1_04 // Ethernet pin 11 (bottom, 6 from left)
//#define ENET_TXD0 P1_00 // Ethernet pin 12 (top row, 6 from left)
//#define ENET_TXD1 P1_01 // Ethernet pin 13 (bottom, 7 from left)
/**
* EXP1 pins

22
Marlin/src/pins/lpc1769/pins_MKS_SGEN.h
View file

@ -47,10 +47,10 @@
//#undef BTN_EN1
//#undef BTN_EN2
//#define BTN_EN1 P1_23 // EXP2.5
//#define BTN_EN2 P1_22 // EXP2.3
//#define BTN_EN1 P1_23 // EXP2.5
//#define BTN_EN2 P1_22 // EXP2.3
#if HAS_TMC220x
#if HAS_TMC_UART
/**
* TMC2208/TMC2209 stepper drivers
*
@ -58,16 +58,16 @@
* In the worst case you may have to give up the LCD.
* RX pins must be interrupt-capable.
*/
#define X_SERIAL_TX_PIN P4_29 // J8-2
#define X_SERIAL_RX_PIN P4_29 // J8-2
#define X_SERIAL_TX_PIN P4_29 // J8-2
#define X_SERIAL_RX_PIN P4_29 // J8-2
#define Y_SERIAL_TX_PIN P2_08 // J8-3
#define Y_SERIAL_RX_PIN P2_08 // J8-3
#define Y_SERIAL_TX_PIN P2_08 // J8-3
#define Y_SERIAL_RX_PIN P2_08 // J8-3
#define Z_SERIAL_TX_PIN P2_11 // J8-4
#define Z_SERIAL_RX_PIN P2_11 // J8-4
#define E0_SERIAL_TX_PIN P2_13 // J8-5
#define E0_SERIAL_RX_PIN P2_13 // J8-5
#define Z_SERIAL_TX_PIN P2_11 // J8-4
#define Z_SERIAL_RX_PIN P2_11 // J8-4
#define E0_SERIAL_TX_PIN P2_13 // J8-5
#define E0_SERIAL_RX_PIN P2_13 // J8-5
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200

82
Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
View file

@ -41,79 +41,79 @@
//
// Servos
//
#define SERVO0_PIN P1_23
#define SERVO0_PIN P1_23
//
// Limit Switches
//
#define X_MIN_PIN P1_24
#define X_MAX_PIN P1_25
#define Y_MIN_PIN P1_26
#define Y_MAX_PIN P1_27
#define Z_MIN_PIN P1_28
#define Z_MAX_PIN P1_29
#define X_MIN_PIN P1_24
#define X_MAX_PIN P1_25
#define Y_MIN_PIN P1_26
#define Y_MAX_PIN P1_27
#define Z_MIN_PIN P1_28
#define Z_MAX_PIN P1_29
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
//
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_0_PIN P0_23_A0 // (T1)
#define TEMP_BED_PIN P0_24_A1 // (T2)
#define TEMP_1_PIN P0_25_A2 // (T3)
#define TEMP_2_PIN P0_26_A3 // (T4)
#define TEMP_0_PIN P0_23_A0 // (T1)
#define TEMP_BED_PIN P0_24_A1 // (T2)
#define TEMP_1_PIN P0_25_A2 // (T3)
#define TEMP_2_PIN P0_26_A3 // (T4)
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07
#define HEATER_1_PIN P1_23
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07
#define HEATER_1_PIN P1_23
#ifndef FAN_PIN
#define FAN_PIN P2_06
#define FAN_PIN P2_06
#endif
#define FAN1_PIN P2_04
#define FAN1_PIN P2_04
//
// LCD / Controller
//
#if ANY(VIKI2, miniVIKI)
#define BEEPER_PIN P1_31
#define DOGLCD_A0 P2_11
#define DOGLCD_CS P0_16
#define BEEPER_PIN P1_31
#define DOGLCD_A0 P2_11
#define DOGLCD_CS P0_16
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_ENC P1_30
#define BTN_EN1 P3_25
#define BTN_EN2 P3_26
#define BTN_ENC P1_30
#define SD_DETECT_PIN P1_18
#define SDSS P1_21
#define SD_DETECT_PIN P1_18
#define SDSS P1_21
#define STAT_LED_RED_PIN P1_19
#define STAT_LED_BLUE_PIN P1_20
#define STAT_LED_RED_PIN P1_19
#define STAT_LED_BLUE_PIN P1_20
#elif HAS_SPI_LCD

114
Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
View file

@ -41,58 +41,58 @@
//
// Servos
//
#define SERVO0_PIN P2_04
#define SERVO0_PIN P2_04
//
// Limit Switches
//
#define X_STOP_PIN P1_24
#define Y_STOP_PIN P1_25
#define Z_STOP_PIN P1_26
#define X_STOP_PIN P1_24
#define Y_STOP_PIN P1_25
#define Z_STOP_PIN P1_26
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN P1_27
#define FIL_RUNOUT_PIN P1_27
#endif
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P1_16
#define X_ENABLE_PIN P1_17
#define X_STEP_PIN P2_00
#define X_DIR_PIN P1_16
#define X_ENABLE_PIN P1_17
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P1_10
#define Y_ENABLE_PIN P1_09
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P1_10
#define Y_ENABLE_PIN P1_09
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P1_15
#define Z_ENABLE_PIN P1_14
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P1_15
#define Z_ENABLE_PIN P1_14
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P1_04
#define E0_ENABLE_PIN P1_08
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P1_04
#define E0_ENABLE_PIN P1_08
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29
#if HAS_TMC_UART
//
// TMC220x stepper drivers
// Software serial
//
#define X_SERIAL_TX_PIN P0_04
#define X_SERIAL_RX_PIN P0_05
#define Y_SERIAL_TX_PIN P0_10
#define Y_SERIAL_RX_PIN P0_11
#define Z_SERIAL_TX_PIN P0_19
#define Z_SERIAL_RX_PIN P0_20
#define E0_SERIAL_TX_PIN P0_22
#define E0_SERIAL_RX_PIN P0_21
#define X_SERIAL_TX_PIN P0_04
#define X_SERIAL_RX_PIN P0_05
#define Y_SERIAL_TX_PIN P0_10
#define Y_SERIAL_RX_PIN P0_11
#define Z_SERIAL_TX_PIN P0_19
#define Z_SERIAL_RX_PIN P0_20
#define E0_SERIAL_TX_PIN P0_22
#define E0_SERIAL_RX_PIN P0_21
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
@ -102,50 +102,50 @@
// Temp Sensors
// 3.3V max when defined as an Analog Input!
//
#if TEMP_SENSOR_0 == 20 // PT100 Adapter
#define TEMP_0_PIN P0_02_A7 // Analog Input
#if TEMP_SENSOR_0 == 20 // PT100 Adapter
#define TEMP_0_PIN P0_02_A7 // Analog Input
#else
#define TEMP_0_PIN P0_23_A0 // Analog Input P0_23
#define TEMP_0_PIN P0_23_A0 // Analog Input P0_23
#endif
#define TEMP_BED_PIN P0_24_A1 // Analog Input P0_24
#define TEMP_1_PIN P0_25_A2 // Analog Input P0_25
#define TEMP_BED_PIN P0_24_A1 // Analog Input P0_24
#define TEMP_1_PIN P0_25_A2 // Analog Input P0_25
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILWIDTH_PIN P0_26_A3 // Analog Input P0_26
#define FILWIDTH_PIN P0_26_A3 // Analog Input P0_26
#else
#define TEMP_2_PIN P0_26_A3 // Analog Input P0_26
#define TEMP_2_PIN P0_26_A3 // Analog Input P0_26
#endif
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07
#ifndef FAN_PIN
#define FAN_PIN P2_06
#define FAN_PIN P2_06
#endif
#define FAN1_PIN P1_22
#define FAN1_PIN P1_22
//
// Auto fans
//
#define AUTO_FAN_PIN P1_22 // FET 3
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
#define AUTO_FAN_PIN P1_22 // FET 3
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN
//
// SD Card
//
#define SDCARD_CONNECTION ONBOARD
#define SDCARD_CONNECTION ONBOARD
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define ONBOARD_SD_CS_PIN P0_06
#define SS_PIN ONBOARD_SD_CS_PIN
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define ONBOARD_SD_CS_PIN P0_06
#define SS_PIN ONBOARD_SD_CS_PIN
//
// LCD / Controller
@ -170,14 +170,14 @@
*/
#if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN P1_31
#define BTN_EN1 P3_26
#define BTN_EN2 P3_25
#define BTN_ENC P1_30
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define KILL_PIN P2_11
#define BEEPER_PIN P1_31
#define BTN_EN1 P3_26
#define BTN_EN2 P3_25
#define BTN_ENC P1_30
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#define KILL_PIN P2_11
#elif HAS_SPI_LCD
#error "Only the CR10_STOCKDISPLAY is supported with TH3D EZBoard."
#endif

48
Marlin/src/pins/mega/pins_CHEAPTRONIC.h
View file

@ -33,46 +33,46 @@
//
// Limit Switches
//
#define X_STOP_PIN 3
#define Y_STOP_PIN 2
#define Z_STOP_PIN 5
#define X_STOP_PIN 3
#define Y_STOP_PIN 2
#define Z_STOP_PIN 5
//
// Steppers
//
#define X_STEP_PIN 14
#define X_DIR_PIN 15
#define X_ENABLE_PIN 24
#define X_STEP_PIN 14
#define X_DIR_PIN 15
#define X_ENABLE_PIN 24
#define Y_STEP_PIN 35
#define Y_DIR_PIN 36
#define Y_ENABLE_PIN 31
#define Y_STEP_PIN 35
#define Y_DIR_PIN 36
#define Y_ENABLE_PIN 31
#define Z_STEP_PIN 40
#define Z_DIR_PIN 41
#define Z_ENABLE_PIN 37
#define Z_STEP_PIN 40
#define Z_DIR_PIN 41
#define Z_ENABLE_PIN 37
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 25
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 25
#define E1_STEP_PIN 33
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#define E1_STEP_PIN 33
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
//
// Temperature sensors
//
#define TEMP_0_PIN 15 // Analog Input
#define TEMP_1_PIN 14 // Analog Input
#define TEMP_BED_PIN 13 // Analog Input
#define TEMP_0_PIN 15 // Analog Input
#define TEMP_1_PIN 14 // Analog Input
#define TEMP_BED_PIN 13 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2
#define HEATER_BED_PIN 22
#define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2
#define HEATER_BED_PIN 22
//
// LCD / Controller

112
Marlin/src/pins/mega/pins_CHEAPTRONICv2.h
View file

@ -36,101 +36,101 @@
//
// Limit Switches
//
#define X_MIN_PIN 30
#define X_MAX_PIN 31
#define Y_MIN_PIN 32
#define Y_MAX_PIN 33
#define Z_MIN_PIN 34
#define Z_MAX_PIN 35
#define X_MIN_PIN 30
#define X_MAX_PIN 31
#define Y_MIN_PIN 32
#define Y_MAX_PIN 33
#define Z_MIN_PIN 34
#define Z_MAX_PIN 35
//
// Steppers
//
#define X_STEP_PIN 17
#define X_DIR_PIN 16
#define X_ENABLE_PIN 48
#define X_STEP_PIN 17
#define X_DIR_PIN 16
#define X_ENABLE_PIN 48
#define Y_STEP_PIN 54
#define Y_DIR_PIN 47
#define Y_ENABLE_PIN 55
#define Y_STEP_PIN 54
#define Y_DIR_PIN 47
#define Y_ENABLE_PIN 55
#define Z_STEP_PIN 57
#define Z_DIR_PIN 56
#define Z_ENABLE_PIN 62
#define Z_STEP_PIN 57
#define Z_DIR_PIN 56
#define Z_ENABLE_PIN 62
#define E0_STEP_PIN 23
#define E0_DIR_PIN 22
#define E0_ENABLE_PIN 24
#define E0_STEP_PIN 23
#define E0_DIR_PIN 22
#define E0_ENABLE_PIN 24
#define E1_STEP_PIN 26
#define E1_DIR_PIN 25
#define E1_ENABLE_PIN 27
#define E1_STEP_PIN 26
#define E1_DIR_PIN 25
#define E1_ENABLE_PIN 27
#define E2_STEP_PIN 29
#define E2_DIR_PIN 28
#define E2_ENABLE_PIN 39
#define E2_STEP_PIN 29
#define E2_DIR_PIN 28
#define E2_ENABLE_PIN 39
//
// Temperature sensors
//
#define TEMP_0_PIN 15
#define TEMP_1_PIN 13
#define TEMP_2_PIN 14
#define TEMP_3_PIN 11 // should be used for chamber temperature control
#define TEMP_BED_PIN 12
#define TEMP_0_PIN 15
#define TEMP_1_PIN 13
#define TEMP_2_PIN 14
#define TEMP_3_PIN 11 // should be used for chamber temperature control
#define TEMP_BED_PIN 12
//
// Heaters / Fans
//
#define HEATER_0_PIN 6
#define HEATER_1_PIN 7
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 9
#define HEATER_0_PIN 6
#define HEATER_1_PIN 7
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 9
#ifndef FAN_PIN
#define FAN_PIN 3
#define FAN_PIN 3
#endif
#define FAN2_PIN 58 // additional fan or light control output
#define FAN2_PIN 58 // additional fan or light control output
//
// Other board specific pins
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 37 // board input labeled as F-DET
#define FIL_RUNOUT_PIN 37 // board input labeled as F-DET
#endif
#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe)
#define LED_PIN 13
#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too
#define EXT_2 5 // additional PWM pin 2 at JP1 connector
#define EXT_3 2 // additional PWM pin 3 at JP1 connector
#define PS_ON_PIN 45
#define KILL_PIN 46
#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe)
#define LED_PIN 13
#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too
#define EXT_2 5 // additional PWM pin 2 at JP1 connector
#define EXT_3 2 // additional PWM pin 3 at JP1 connector
#define PS_ON_PIN 45
#define KILL_PIN 46
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 11 // shared with TEMP_3 analog input
#define FILWIDTH_PIN 11 // shared with TEMP_3 analog input
#endif
//
// LCD / Controller
//
#define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 18
#define LCD_PINS_D5 38
#define LCD_PINS_D6 41
#define LCD_PINS_D7 40
#define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 18
#define LCD_PINS_D5 38
#define LCD_PINS_D6 41
#define LCD_PINS_D7 40
//
// Beeper, SD Card, Encoder
//
#define BEEPER_PIN 44
#define BEEPER_PIN 44
#if ENABLED(SDSUPPORT)
#define SDSS 53
#define SD_DETECT_PIN 49
#define SDSS 53
#define SD_DETECT_PIN 49
#endif
#if ENABLED(NEWPANEL)
#define BTN_EN1 11
#define BTN_EN2 12
#define BTN_ENC 43
#define BTN_EN1 11
#define BTN_EN2 12
#define BTN_ENC 43
#endif

132
Marlin/src/pins/mega/pins_CNCONTROLS_11.h
View file

@ -34,115 +34,115 @@
//
// Limit Switches
//
#define X_STOP_PIN 43
#define Y_STOP_PIN 45
#define Z_STOP_PIN 42
#define X_STOP_PIN 43
#define Y_STOP_PIN 45
#define Z_STOP_PIN 42
//
// Steppers
//
#define X_STEP_PIN 34
#define X_DIR_PIN 36
#define X_ENABLE_PIN 35
#define X_STEP_PIN 34
#define X_DIR_PIN 36
#define X_ENABLE_PIN 35
#define Y_STEP_PIN 37
#define Y_DIR_PIN 39
#define Y_ENABLE_PIN 38
#define Y_STEP_PIN 37
#define Y_DIR_PIN 39
#define Y_ENABLE_PIN 38
#define Z_STEP_PIN 40
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 41
#define Z_STEP_PIN 40
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 41
#define E0_STEP_PIN 29
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 3
#define E0_STEP_PIN 29
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 3
#define E1_STEP_PIN 61
#define E1_DIR_PIN 62
#define E1_ENABLE_PIN 60
#define E1_STEP_PIN 61
#define E1_DIR_PIN 62
#define E1_ENABLE_PIN 60
#define E2_STEP_PIN 15
#define E2_DIR_PIN 14
#define E2_ENABLE_PIN 16
#define E2_STEP_PIN 15
#define E2_DIR_PIN 14
#define E2_ENABLE_PIN 16
#define E3_STEP_PIN 44
#define E3_DIR_PIN 49
#define E3_ENABLE_PIN 47
#define E3_STEP_PIN 44
#define E3_DIR_PIN 49
#define E3_ENABLE_PIN 47
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 3 // Analog Input. 3 for tool2 -> 2 for chambertemp
#define TEMP_2_PIN 2 // Analog Input. 9 for tool3 -> 2 for chambertemp
#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 2 for chambertemp
#define TEMP_BED_PIN 1 // Analog Input
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 3 // Analog Input. 3 for tool2 -> 2 for chambertemp
#define TEMP_2_PIN 2 // Analog Input. 9 for tool3 -> 2 for chambertemp
#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 2 for chambertemp
#define TEMP_BED_PIN 1 // Analog Input
#ifndef TEMP_CHAMBER_PIN
//#define TEMP_CHAMBER_PIN 2 // Analog Input
//#define TEMP_CHAMBER_PIN 2 // Analog Input
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 5
#define HEATER_1_PIN 58
#define HEATER_2_PIN 64
#define HEATER_3_PIN 46
#define HEATER_BED_PIN 2
#define HEATER_0_PIN 5
#define HEATER_1_PIN 58
#define HEATER_2_PIN 64
#define HEATER_3_PIN 46
#define HEATER_BED_PIN 2
#ifndef FAN_PIN
//#define FAN_PIN 7 // common PWM pin for all tools
//#define FAN_PIN 7 // common PWM pin for all tools
#endif
#define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7
#define ORIG_E2_AUTO_FAN_PIN 7
#define ORIG_E3_AUTO_FAN_PIN 7
#define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7
#define ORIG_E2_AUTO_FAN_PIN 7
#define ORIG_E3_AUTO_FAN_PIN 7
//
// Misc. Functions
//
#define SDSS 53
#define SD_DETECT_PIN 13
#define SDSS 53
#define SD_DETECT_PIN 13
// Tools
//#define TOOL_0_PIN 4
//#define TOOL_1_PIN 59
//#define TOOL_2_PIN 8
//#define TOOL_3_PIN 30
//#define TOOL_PWM_PIN 7 // common PWM pin for all tools
//#define TOOL_0_PIN 4
//#define TOOL_1_PIN 59
//#define TOOL_2_PIN 8
//#define TOOL_3_PIN 30
//#define TOOL_PWM_PIN 7 // common PWM pin for all tools
// Common I/O
//#define FIL_RUNOUT_PIN -1
//#define PWM_1_PIN 11
//#define PWM_2_PIN 10
//#define SPARE_IO 12
//#define FIL_RUNOUT_PIN -1
//#define PWM_1_PIN 11
//#define PWM_2_PIN 10
//#define SPARE_IO 12
//
// LCD / Controller
//
#define BEEPER_PIN 6
#define BEEPER_PIN 6
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 26
#define DOGLCD_CS 24
#define DOGLCD_MOSI -1
#define DOGLCD_SCK -1
#define DOGLCD_A0 26
#define DOGLCD_CS 24
#define DOGLCD_MOSI -1
#define DOGLCD_SCK -1
#define BTN_EN1 23
#define BTN_EN2 25
#define BTN_ENC 27
#define BTN_EN1 23
#define BTN_EN2 25
#define BTN_ENC 27
// Hardware buttons for manual movement of XYZ
#define SHIFT_OUT 19
#define SHIFT_LD 18
#define SHIFT_CLK 17
#define SHIFT_OUT 19
#define SHIFT_LD 18
#define SHIFT_CLK 17
//#define UI1 31
//#define UI2 22
//#define UI1 31
//#define UI2 22
#define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 31
#define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 31

138
Marlin/src/pins/mega/pins_CNCONTROLS_12.h
View file

@ -34,122 +34,122 @@
//
// Limit Switches
//
#define X_STOP_PIN 19
#define Y_STOP_PIN 22
#define Z_STOP_PIN 23
#define X_STOP_PIN 19
#define Y_STOP_PIN 22
#define Z_STOP_PIN 23
//
// Steppers
//
#define X_STEP_PIN 25
#define X_DIR_PIN 27
#define X_ENABLE_PIN 26
#define X_STEP_PIN 25
#define X_DIR_PIN 27
#define X_ENABLE_PIN 26
#define Y_STEP_PIN 28
#define Y_DIR_PIN 30
#define Y_ENABLE_PIN 29
#define Y_STEP_PIN 28
#define Y_DIR_PIN 30
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 31
#define Z_DIR_PIN 33
#define Z_ENABLE_PIN 32
#define Z_STEP_PIN 31
#define Z_DIR_PIN 33
#define Z_ENABLE_PIN 32
#define E0_STEP_PIN 57
#define E0_DIR_PIN 55
#define E0_ENABLE_PIN 58
#define E0_STEP_PIN 57
#define E0_DIR_PIN 55
#define E0_ENABLE_PIN 58
#define E1_STEP_PIN 61
#define E1_DIR_PIN 62
#define E1_ENABLE_PIN 60
#define E1_STEP_PIN 61
#define E1_DIR_PIN 62
#define E1_ENABLE_PIN 60
#define E2_STEP_PIN 46
#define E2_DIR_PIN 66
#define E2_ENABLE_PIN 44
#define E2_STEP_PIN 46
#define E2_DIR_PIN 66
#define E2_ENABLE_PIN 44
#define E3_STEP_PIN 45
#define E3_DIR_PIN 69
#define E3_ENABLE_PIN 47
#define E3_STEP_PIN 45
#define E3_DIR_PIN 69
#define E3_ENABLE_PIN 47
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 9 // Analog Input. 9 for tool2 -> 13 for chambertemp
#define TEMP_2_PIN 13 // Analog Input. 10 for tool3 -> 13 for chambertemp
#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 13 for chambertemp
#define TEMP_BED_PIN 14 // Analog Input
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 9 // Analog Input. 9 for tool2 -> 13 for chambertemp
#define TEMP_2_PIN 13 // Analog Input. 10 for tool3 -> 13 for chambertemp
#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 13 for chambertemp
#define TEMP_BED_PIN 14 // Analog Input
#ifndef TEMP_CHAMBER_PIN
//#define TEMP_CHAMBER_PIN 13 // Analog Input
//#define TEMP_CHAMBER_PIN 13 // Analog Input
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 11
#define HEATER_1_PIN 9
#define HEATER_2_PIN 6
#define HEATER_3_PIN 3
#define HEATER_BED_PIN 24
#define HEATER_0_PIN 11
#define HEATER_1_PIN 9
#define HEATER_2_PIN 6
#define HEATER_3_PIN 3
#define HEATER_BED_PIN 24
#ifndef FAN_PIN
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
#endif
#define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7
#define ORIG_E2_AUTO_FAN_PIN 7
#define ORIG_E3_AUTO_FAN_PIN 7
#define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7
#define ORIG_E2_AUTO_FAN_PIN 7
#define ORIG_E3_AUTO_FAN_PIN 7
//
// Misc. Functions
//
#define SDSS 53
#define SD_DETECT_PIN 15
#define SDSS 53
#define SD_DETECT_PIN 15
// Tools
//#define TOOL_0_PIN 56
//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder
//#define TOOL_1_PIN 59
//#define TOOL_1_PWM_PIN 8 // lights at dual extruder
//#define TOOL_2_PIN 4
//#define TOOL_2_PWM_PIN 5
//#define TOOL_3_PIN 14
//#define TOOL_3_PWM_PIN 2
//#define TOOL_0_PIN 56
//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder
//#define TOOL_1_PIN 59
//#define TOOL_1_PWM_PIN 8 // lights at dual extruder
//#define TOOL_2_PIN 4
//#define TOOL_2_PWM_PIN 5
//#define TOOL_3_PIN 14
//#define TOOL_3_PWM_PIN 2
// Common I/O
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 18
#define FIL_RUNOUT_PIN 18
#endif
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
//
// LCD / Controller
//
#define BEEPER_PIN 16
#define BEEPER_PIN 16
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 39
#define DOGLCD_CS 35
#define DOGLCD_MOSI 48
#define DOGLCD_SCK 49
#define DOGLCD_A0 39
#define DOGLCD_CS 35
#define DOGLCD_MOSI 48
#define DOGLCD_SCK 49
#define LCD_SCREEN_ROT_180
// The encoder and click button
#define BTN_EN1 36
#define BTN_EN2 34
#define BTN_ENC 38
#define BTN_EN1 36
#define BTN_EN2 34
#define BTN_ENC 38
// Hardware buttons for manual movement of XYZ
#define SHIFT_OUT 42
#define SHIFT_LD 41
#define SHIFT_CLK 40
#define SHIFT_OUT 42
#define SHIFT_LD 41
#define SHIFT_CLK 40
//#define UI1 43
//#define UI2 37
//#define UI1 43
//#define UI2 37
#define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN
#define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN

78
Marlin/src/pins/mega/pins_CNCONTROLS_15.h
View file

@ -34,79 +34,79 @@
//
// Servos
//
#define SERVO0_PIN 6
#define SERVO0_PIN 6
//
// Limit Switches
//
#define X_STOP_PIN 34
#define Y_STOP_PIN 39
#define Z_STOP_PIN 62
#define X_STOP_PIN 34
#define Y_STOP_PIN 39
#define Z_STOP_PIN 62
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 49
#define Z_MIN_PROBE_PIN 49
#endif
//
// Steppers
//
#define X_STEP_PIN 14
#define X_DIR_PIN 25
#define X_ENABLE_PIN 26
#define X_STEP_PIN 14
#define X_DIR_PIN 25
#define X_ENABLE_PIN 26
#define Y_STEP_PIN 11
#define Y_DIR_PIN 12
#define Y_ENABLE_PIN 15
#define Y_STEP_PIN 11
#define Y_DIR_PIN 12
#define Y_ENABLE_PIN 15
#define Z_STEP_PIN 24
#define Z_DIR_PIN 27
#define Z_ENABLE_PIN 28
#define Z_STEP_PIN 24
#define Z_DIR_PIN 27
#define Z_ENABLE_PIN 28
#define E0_STEP_PIN 64
#define E0_DIR_PIN 65
#define E0_ENABLE_PIN 63
#define E0_STEP_PIN 64
#define E0_DIR_PIN 65
#define E0_ENABLE_PIN 63
//
// Temperature Sensors
// Analog Inputs
//
#define TEMP_0_PIN 2 // Analog Input
#define TEMP_BED_PIN 4 // Analog Input
#define TEMP_0_PIN 2 // Analog Input
#define TEMP_BED_PIN 4 // Analog Input
#ifndef TEMP_CHAMBER_PIN
#define TEMP_CHAMBER_PIN 5 // Analog Input
#define TEMP_CHAMBER_PIN 5 // Analog Input
#endif
//
// Heaters
//
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 32
#define HEATER_CHAMBER_PIN 33
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 32
#define HEATER_CHAMBER_PIN 33
//
// Fans
//
#define FAN_PIN 8
#define ORIG_E0_AUTO_FAN_PIN 30
#define ORIG_E1_AUTO_FAN_PIN 30
#define ORIG_E2_AUTO_FAN_PIN 30
#define ORIG_E3_AUTO_FAN_PIN 30
//#define ORIG_CHAMBER_AUTO_FAN_PIN 10
#define FAN_PIN 8
#define ORIG_E0_AUTO_FAN_PIN 30
#define ORIG_E1_AUTO_FAN_PIN 30
#define ORIG_E2_AUTO_FAN_PIN 30
#define ORIG_E3_AUTO_FAN_PIN 30
//#define ORIG_CHAMBER_AUTO_FAN_PIN 10
//
// Misc. Functions
//
#define SDSS 53
#define SD_DETECT_PIN 40
#define SDSS 53
#define SD_DETECT_PIN 40
// Common I/O
#define FIL_RUNOUT_PIN 9
//#define FIL_RUNOUT_PIN 29 // encoder sensor
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
#define BEEPER_PIN 13
#define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 10 // 31
#define FIL_RUNOUT_PIN 9
//#define FIL_RUNOUT_PIN 29 // encoder sensor
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
#define BEEPER_PIN 13
#define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 10 // 31

68
Marlin/src/pins/mega/pins_EINSTART-S.h
View file

@ -35,48 +35,48 @@
//
// Limit Switches
//
#define X_STOP_PIN 44
#define Y_STOP_PIN 43
#define Z_STOP_PIN 42
#define X_STOP_PIN 44
#define Y_STOP_PIN 43
#define Z_STOP_PIN 42
//
// Steppers
//
#define X_STEP_PIN 76
#define X_DIR_PIN 75
#define X_ENABLE_PIN 73
#define X_STEP_PIN 76
#define X_DIR_PIN 75
#define X_ENABLE_PIN 73
#define Y_STEP_PIN 31
#define Y_DIR_PIN 32
#define Y_ENABLE_PIN 72
#define Y_STEP_PIN 31
#define Y_DIR_PIN 32
#define Y_ENABLE_PIN 72
#define Z_STEP_PIN 34
#define Z_DIR_PIN 35
#define Z_ENABLE_PIN 33
#define Z_STEP_PIN 34
#define Z_DIR_PIN 35
#define Z_ENABLE_PIN 33
#define E0_STEP_PIN 36
#define E0_DIR_PIN 37
#define E0_ENABLE_PIN 30
#define E0_STEP_PIN 36
#define E0_DIR_PIN 37
#define E0_ENABLE_PIN 30
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_BED_PIN 1 // Analog Input
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_BED_PIN 1 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 83
#define HEATER_BED_PIN 38
#define HEATER_0_PIN 83
#define HEATER_BED_PIN 38
#define FAN_PIN 82
#define FAN_PIN 82
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 4
#define SDSS 53
#define LED_PIN 4
//////////////////////////
// LCDs and Controllers //
@ -90,24 +90,24 @@
// u8glib constructor
// U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS);
#define LCD_PINS_DC 78
#define LCD_PINS_RS 79
#define LCD_PINS_DC 78
#define LCD_PINS_RS 79
// DOGM SPI LCD Support
#define DOGLCD_CS 3
#define DOGLCD_MOSI 2
#define DOGLCD_SCK 5
#define DOGLCD_A0 2
#define DOGLCD_CS 3
#define DOGLCD_MOSI 2
#define DOGLCD_SCK 5
#define DOGLCD_A0 2
//
// LCD Display input pins
//
#define BTN_UP 25
#define BTN_DWN 26
#define BTN_LFT 27
#define BTN_RT 28
#define BTN_UP 25
#define BTN_DWN 26
#define BTN_LFT 27
#define BTN_RT 28
// 'OK' button
#define BTN_ENC 29
#define BTN_ENC 29
// Set Kill to right arrow, same as RIGID_PANEL
#define KILL_PIN 28
#define KILL_PIN 28

104
Marlin/src/pins/mega/pins_ELEFU_3.h
View file

@ -34,115 +34,115 @@
//
// Limit Switches
//
#define X_MIN_PIN 35
#define X_MAX_PIN 34
#define Y_MIN_PIN 33
#define Y_MAX_PIN 32
#define Z_MIN_PIN 31
#define Z_MAX_PIN 30
#define X_MIN_PIN 35
#define X_MAX_PIN 34
#define Y_MIN_PIN 33
#define Y_MAX_PIN 32
#define Z_MIN_PIN 31
#define Z_MAX_PIN 30
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 30
#define Z_MIN_PROBE_PIN 30
#endif
//
// Steppers
//
#define X_STEP_PIN 49
#define X_DIR_PIN 13
#define X_ENABLE_PIN 48
#define X_STEP_PIN 49
#define X_DIR_PIN 13
#define X_ENABLE_PIN 48
#define Y_STEP_PIN 11
#define Y_DIR_PIN 9
#define Y_ENABLE_PIN 12
#define Y_STEP_PIN 11
#define Y_DIR_PIN 9
#define Y_ENABLE_PIN 12
#define Z_STEP_PIN 7
#define Z_DIR_PIN 6
#define Z_ENABLE_PIN 8
#define Z_STEP_PIN 7
#define Z_DIR_PIN 6
#define Z_ENABLE_PIN 8
#define E0_STEP_PIN 40
#define E0_DIR_PIN 41
#define E0_ENABLE_PIN 37
#define E0_STEP_PIN 40
#define E0_DIR_PIN 41
#define E0_ENABLE_PIN 37
#define E1_STEP_PIN 18
#define E1_DIR_PIN 19
#define E1_ENABLE_PIN 38
#define E1_STEP_PIN 18
#define E1_DIR_PIN 19
#define E1_ENABLE_PIN 38
#define E2_STEP_PIN 43
#define E2_DIR_PIN 47
#define E2_ENABLE_PIN 42
#define E2_STEP_PIN 43
#define E2_DIR_PIN 47
#define E2_ENABLE_PIN 42
//
// Temperature Sensors
//
#define TEMP_0_PIN 3 // Analog Input
#define TEMP_1_PIN 2 // Analog Input
#define TEMP_2_PIN 1 // Analog Input
#define TEMP_BED_PIN 0 // Analog Input
#define TEMP_0_PIN 3 // Analog Input
#define TEMP_1_PIN 2 // Analog Input
#define TEMP_2_PIN 1 // Analog Input
#define TEMP_BED_PIN 0 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 45 // 12V PWM1
#define HEATER_1_PIN 46 // 12V PWM2
#define HEATER_2_PIN 17 // 12V PWM3
#define HEATER_BED_PIN 44 // DOUBLE 12V PWM
#define HEATER_0_PIN 45 // 12V PWM1
#define HEATER_1_PIN 46 // 12V PWM2
#define HEATER_2_PIN 17 // 12V PWM3
#define HEATER_BED_PIN 44 // DOUBLE 12V PWM
#ifndef FAN_PIN
#define FAN_PIN 16 // 5V PWM
#define FAN_PIN 16 // 5V PWM
#endif
//
// Misc. Functions
//
#define PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 // This feature still needs work
#define PHOTOGRAPH_PIN 29
#define PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 // This feature still needs work
#define PHOTOGRAPH_PIN 29
//
// LCD / Controller
//
#define BEEPER_PIN 36
#define BEEPER_PIN 36
#if ENABLED(RA_CONTROL_PANEL)
#define SDSS 53
#define SD_DETECT_PIN 28
#define SDSS 53
#define SD_DETECT_PIN 28
#define BTN_EN1 14
#define BTN_EN2 39
#define BTN_ENC 15
#define BTN_EN1 14
#define BTN_EN2 39
#define BTN_ENC 15
#endif // RA_CONTROL_PANEL
#if ENABLED(RA_DISCO)
// variables for which pins the TLC5947 is using
#define TLC_CLOCK_PIN 25
#define TLC_BLANK_PIN 23
#define TLC_XLAT_PIN 22
#define TLC_DATA_PIN 24
#define TLC_CLOCK_PIN 25
#define TLC_BLANK_PIN 23
#define TLC_XLAT_PIN 22
#define TLC_DATA_PIN 24
// We also need to define pin to port number mapping for the 2560 to match the pins listed above.
// If you change the TLC pins, update this as well per the 2560 datasheet! This currently only works with the RA Board.
#define TLC_CLOCK_BIT 3
#define TLC_CLOCK_BIT 3
#define TLC_CLOCK_PORT &PORTA
#define TLC_BLANK_BIT 1
#define TLC_BLANK_BIT 1
#define TLC_BLANK_PORT &PORTA
#define TLC_DATA_BIT 2
#define TLC_DATA_BIT 2
#define TLC_DATA_PORT &PORTA
#define TLC_XLAT_BIT 0
#define TLC_XLAT_BIT 0
#define TLC_XLAT_PORT &PORTA
// Change this to match your situation. Lots of TLCs takes up the arduino SRAM very quickly, so be careful
// Leave it at at least 1 if you have enabled RA_LIGHTING
// The number of TLC5947 boards chained together for use with the animation, additional ones will repeat the animation on them, but are not individually addressable and mimic those before them. You can leave the default at 2 even if you only have 1 TLC5947 module.
#define NUM_TLCS 2
#define NUM_TLCS 2
// These TRANS_ARRAY values let you change the order the LEDs on the lighting modules will animate for chase functions.
// Modify them according to your specific situation.

120
Marlin/src/pins/mega/pins_GT2560_REV_A.h
View file

@ -39,102 +39,102 @@
//
// Limit Switches
//
#define X_MIN_PIN 22
#define X_MAX_PIN 24
#define Y_MIN_PIN 26
#define Y_MAX_PIN 28
#define Z_MIN_PIN 30
#define Z_MAX_PIN 32
#define X_MIN_PIN 22
#define X_MAX_PIN 24
#define Y_MIN_PIN 26
#define Y_MAX_PIN 28
#define Z_MIN_PIN 30
#define Z_MAX_PIN 32
//
// Steppers
//
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 37
#define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35
#define Z_STEP_PIN 37
#define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35
#define E0_STEP_PIN 43
#define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41
#define E0_STEP_PIN 43
#define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
//
// Temperature Sensors
//
#define TEMP_0_PIN 8
#define TEMP_1_PIN 9
#define TEMP_BED_PIN 10
#define TEMP_0_PIN 8
#define TEMP_1_PIN 9
#define TEMP_BED_PIN 10
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#ifndef FAN_PIN
#define FAN_PIN 7
#define FAN_PIN 7
#endif
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing
#define KILL_PIN -1
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing
#define KILL_PIN -1
#if HAS_SPI_LCD
#define BEEPER_PIN 18
#define BEEPER_PIN 18
#if ENABLED(NEWPANEL)
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_A0 5
#define DOGLCD_CS 21
#define BTN_EN1 40
#define BTN_EN2 42
#define DOGLCD_A0 5
#define DOGLCD_CS 21
#define BTN_EN1 40
#define BTN_EN2 42
#else
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#define BTN_EN1 42
#define BTN_EN2 40
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#define BTN_EN1 42
#define BTN_EN2 40
#endif
#define BTN_ENC 19
#define SD_DETECT_PIN 38
#define BTN_ENC 19
#define SD_DETECT_PIN 38
#else // !NEWPANEL
#else // !NEWPANEL
#define SHIFT_CLK 38
#define SHIFT_LD 42
#define SHIFT_OUT 40
#define SHIFT_EN 17
#define SHIFT_CLK 38
#define SHIFT_LD 42
#define SHIFT_OUT 40
#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 5
#define LCD_PINS_D4 6
#define LCD_PINS_D5 21
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 5
#define LCD_PINS_D4 6
#define LCD_PINS_D5 21
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
#define SD_DETECT_PIN -1
#define SD_DETECT_PIN -1
#endif // !NEWPANEL

114
Marlin/src/pins/mega/pins_GT2560_V3.h
View file

@ -36,33 +36,33 @@
//
// Servos
//
#define SERVO0_PIN 11 //13 untested 3Dtouch
#define SERVO0_PIN 11 //13 untested 3Dtouch
//
// Limit Switches
//
#ifndef X_STOP_PIN
#ifndef X_MIN_PIN
#define X_MIN_PIN 24
#define X_MIN_PIN 24
#endif
#ifndef X_MAX_PIN
#define X_MAX_PIN 22
#define X_MAX_PIN 22
#endif
#endif
#ifndef Y_STOP_PIN
#ifndef Y_MIN_PIN
#define Y_MIN_PIN 28
#define Y_MIN_PIN 28
#endif
#ifndef Y_MAX_PIN
#define Y_MAX_PIN 26
#define Y_MAX_PIN 26
#endif
#endif
#ifndef Z_STOP_PIN
#ifndef Z_MIN_PIN
#define Z_MIN_PIN 30
#define Z_MIN_PIN 30
#endif
#ifndef Z_MAX_PIN
#define Z_MAX_PIN 32
#define Z_MAX_PIN 32
#endif
#endif
@ -70,116 +70,116 @@
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#define Z_MIN_PROBE_PIN 32
#endif
//
// Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 66
#define FIL_RUNOUT_PIN 66
#endif
#ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN 67
#define FIL_RUNOUT2_PIN 67
#endif
//
// Power Recovery
//
#define POWER_LOSS_PIN 69 // Pin to detect power loss
#define POWER_LOSS_STATE LOW
#define POWER_LOSS_PIN 69 // Pin to detect power loss
#define POWER_LOSS_STATE LOW
//
// Steppers
//
#define X_STEP_PIN 37
#define X_DIR_PIN 39
#define X_ENABLE_PIN 35
#define X_STEP_PIN 37
#define X_DIR_PIN 39
#define X_ENABLE_PIN 35
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 25
#define Z_DIR_PIN 23
#define Z_ENABLE_PIN 27
#define Z_STEP_PIN 25
#define Z_DIR_PIN 23
#define Z_ENABLE_PIN 27
#define E0_STEP_PIN 46
#define E0_DIR_PIN 44
#define E0_ENABLE_PIN 12
#define E0_STEP_PIN 46
#define E0_DIR_PIN 44
#define E0_ENABLE_PIN 12
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define E2_STEP_PIN 43
#define E2_DIR_PIN 45
#define E2_ENABLE_PIN 41
#define E2_STEP_PIN 43
#define E2_DIR_PIN 45
#define E2_ENABLE_PIN 41
//
// Temperature Sensors
//
#define TEMP_0_PIN 11 // Analog Input
#define TEMP_1_PIN 9 // Analog Input
#define TEMP_2_PIN 1 // Analog Input
#define TEMP_BED_PIN 10 // Analog Input
#define TEMP_0_PIN 11 // Analog Input
#define TEMP_1_PIN 9 // Analog Input
#define TEMP_2_PIN 1 // Analog Input
#define TEMP_BED_PIN 10 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 10
#define HEATER_1_PIN 3
#define HEATER_2_PIN 1
#define HEATER_BED_PIN 4
#define FAN_PIN 9
#define FAN1_PIN 8
#define FAN2_PIN 7
#define HEATER_0_PIN 10
#define HEATER_1_PIN 3
#define HEATER_2_PIN 1
#define HEATER_BED_PIN 4
#define FAN_PIN 9
#define FAN1_PIN 8
#define FAN2_PIN 7
//
// Misc. Functions
//
#define SD_DETECT_PIN 38
#define SDSS 53
#define LED_PIN 6
#define PS_ON_PIN 12
#define SUICIDE_PIN 54 // This pin must be enabled at boot to keep power flowing
#define SD_DETECT_PIN 38
#define SDSS 53
#define LED_PIN 6
#define PS_ON_PIN 12
#define SUICIDE_PIN 54 // This pin must be enabled at boot to keep power flowing
#ifndef CASE_LIGHT_PIN
#define CASE_LIGHT_PIN 6 // 21
#define CASE_LIGHT_PIN 6 // 21
#endif
//
// LCD Controller
//
#define BEEPER_PIN 18
#define BEEPER_PIN 18
#ifndef LCD_PINS_RS
#define LCD_PINS_RS 20
#define LCD_PINS_RS 20
#endif
#ifndef LCD_PINS_ENABLE
#define LCD_PINS_ENABLE 17
#define LCD_PINS_ENABLE 17
#endif
#ifndef LCD_PINS_D4
#define LCD_PINS_D4 16
#define LCD_PINS_D4 16
#endif
#ifndef LCD_PINS_D5
#define LCD_PINS_D5 21
#define LCD_PINS_D5 21
#endif
#ifndef LCD_PINS_D6
#define LCD_PINS_D6 5
#define LCD_PINS_D6 5
#endif
#ifndef LCD_PINS_D7
#define LCD_PINS_D7 36
#define LCD_PINS_D7 36
#endif
#if ENABLED(NEWPANEL)
#ifndef BTN_EN1
#define BTN_EN1 42
#define BTN_EN1 42
#endif
#ifndef BTN_EN2
#define BTN_EN2 40
#define BTN_EN2 40
#endif
#ifndef BTN_ENC
#define BTN_ENC 19
#define BTN_ENC 19
#endif
#endif

14
Marlin/src/pins/mega/pins_GT2560_V3_A20.h
View file

@ -25,15 +25,15 @@
* Geeetech A20M pin assignment
*/
#define LCD_PINS_RS 5
#define LCD_PINS_ENABLE 36
#define LCD_PINS_D4 21
#define LCD_PINS_D7 6
#define LCD_PINS_RS 5
#define LCD_PINS_ENABLE 36
#define LCD_PINS_D4 21
#define LCD_PINS_D7 6
#if ENABLED(NEWPANEL)
#define BTN_EN1 16
#define BTN_EN2 17
#define BTN_ENC 19
#define BTN_EN1 16
#define BTN_EN2 17
#define BTN_ENC 19
#endif
#include "pins_GT2560_V3.h"

8
Marlin/src/pins/mega/pins_GT2560_V3_MC2.h
View file

@ -27,9 +27,9 @@
#define BOARD_INFO_NAME "GT2560 V3.0 (MC2)"
#define X_MIN_PIN 22
#define X_MAX_PIN 24
#define Y_MIN_PIN 26
#define Y_MAX_PIN 28
#define X_MIN_PIN 22
#define X_MAX_PIN 24
#define Y_MIN_PIN 26
#define Y_MAX_PIN 28
#include "pins_GT2560_V3.h"

124
Marlin/src/pins/mega/pins_HJC2560C_REV2.h
View file

@ -42,79 +42,79 @@
//
// Limit Switches
//
#define X_STOP_PIN 22
#define Y_STOP_PIN 26
#define Z_STOP_PIN 29
//#define EXP_STOP_PIN 28
#define X_STOP_PIN 22
#define Y_STOP_PIN 26
#define Z_STOP_PIN 29
//#define EXP_STOP_PIN 28
//
// Steppers
//
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define Y_STEP_PIN 32
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 31
#define Y_STEP_PIN 32
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 31
#define Z_STEP_PIN 35
#define Z_DIR_PIN 36
#define Z_ENABLE_PIN 34
#define Z_STEP_PIN 35
#define Z_DIR_PIN 36
#define Z_ENABLE_PIN 34
#define E0_STEP_PIN 42
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 37
#define E0_STEP_PIN 42
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 37
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define MOTOR_CURRENT_PWM_XY_PIN 44
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 46
#define MOTOR_CURRENT_PWM_XY_PIN 44
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 46
// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#ifndef MOTOR_CURRENT_PWM_RANGE
#define MOTOR_CURRENT_PWM_RANGE 2000
#define MOTOR_CURRENT_PWM_RANGE 2000
#endif
#define DEFAULT_PWM_MOTOR_CURRENT { 1300, 1300, 1250 }
//
// Temperature Sensors
//
#define TEMP_0_PIN 8 // Analog Input
#define TEMP_1_PIN 9 // Analog Input
#define TEMP_BED_PIN 10 // Analog Input
#define TEMP_0_PIN 8 // Analog Input
#define TEMP_1_PIN 9 // Analog Input
#define TEMP_BED_PIN 10 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#ifndef FAN_PIN
#define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释
#define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释
#endif
//
// Misc. Functions
//
#define SDSS 53
#define SD_DETECT_PIN 39
//#define LED_PIN 8
#define CASE_LIGHT_PIN 8 // 8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8
#define SDSS 53
#define SD_DETECT_PIN 39
//#define LED_PIN 8
#define CASE_LIGHT_PIN 8 // 8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8
//#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
//#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
//#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
//#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE)
#define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
#define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
#endif
//
@ -122,48 +122,48 @@
//
#if HAS_SPI_LCD
#define BEEPER_PIN 18
#define BEEPER_PIN 18
#if ENABLED(NEWPANEL)
#define LCD_PINS_RS 20 // LCD_CS
#define LCD_PINS_ENABLE 15 // LCD_SDA
#define LCD_PINS_D4 14 // LCD_SCK
#define LCD_PINS_RS 20 // LCD_CS
#define LCD_PINS_ENABLE 15 // LCD_SDA
#define LCD_PINS_D4 14 // LCD_SCK
#if ENABLED(HJC_LCD_SMART_CONTROLLER)
#define LCD_BACKLIGHT_PIN 5 // LCD_Backlight
#define LCD_BACKLIGHT_PIN 5 // LCD_Backlight
//#ifndef LCD_CONTRAST_PIN
// #define LCD_CONTRAST_PIN 5 // LCD_Contrast
//#endif
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 24 // Filament runout
#define FIL_RUNOUT_PIN 24 // Filament runout
#endif
#else
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#endif
#define BTN_EN1 41
#define BTN_EN2 40
#define BTN_ENC 19
#define BTN_EN1 41
#define BTN_EN2 40
#define BTN_ENC 19
#define SD_DETECT_PIN 39
#define SD_DETECT_PIN 39
#else
// Buttons attached to a shift register
#define SHIFT_CLK 38
#define SHIFT_LD 42
#define SHIFT_OUT 40
#define SHIFT_EN 17
#define SHIFT_CLK 38
#define SHIFT_LD 42
#define SHIFT_OUT 40
#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 5
#define LCD_PINS_D4 6
#define LCD_PINS_D5 21
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 5
#define LCD_PINS_D4 6
#define LCD_PINS_D5 21
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
#endif // !NEWPANEL

66
Marlin/src/pins/mega/pins_LEAPFROG.h
View file

@ -34,59 +34,59 @@
//
// Limit Switches
//
#define X_MIN_PIN 47
#define X_MAX_PIN 2
#define Y_MIN_PIN 48
#define Y_MAX_PIN 15
#define Z_MIN_PIN 49
#define Z_MAX_PIN -1
#define X_MIN_PIN 47
#define X_MAX_PIN 2
#define Y_MIN_PIN 48
#define Y_MAX_PIN 15
#define Z_MIN_PIN 49
#define Z_MAX_PIN -1
//
// Steppers
//
#define X_STEP_PIN 28
#define X_DIR_PIN 63
#define X_ENABLE_PIN 29
#define X_STEP_PIN 28
#define X_DIR_PIN 63
#define X_ENABLE_PIN 29
#define Y_STEP_PIN 14 // A6
#define Y_DIR_PIN 15 // A0
#define Y_ENABLE_PIN 39
#define Y_STEP_PIN 14 // A6
#define Y_DIR_PIN 15 // A0
#define Y_ENABLE_PIN 39
#define Z_STEP_PIN 31 // A2
#define Z_DIR_PIN 32 // A6
#define Z_ENABLE_PIN 30 // A1
#define Z_STEP_PIN 31 // A2
#define Z_DIR_PIN 32 // A6
#define Z_ENABLE_PIN 30 // A1
#define E0_STEP_PIN 34 // 34
#define E0_DIR_PIN 35 // 35
#define E0_ENABLE_PIN 33 // 33
#define E0_STEP_PIN 34 // 34
#define E0_DIR_PIN 35 // 35
#define E0_ENABLE_PIN 33 // 33
#define E1_STEP_PIN 37 // 37
#define E1_DIR_PIN 40 // 40
#define E1_ENABLE_PIN 36 // 36
#define E1_STEP_PIN 37 // 37
#define E1_DIR_PIN 40 // 40
#define E1_ENABLE_PIN 36 // 36
//
// Temperature Sensors
//
#define TEMP_0_PIN 13 // Analog Input (D27)
#define TEMP_1_PIN 15 // Analog Input (1)
#define TEMP_BED_PIN 14 // Analog Input (1,2 or I2C)
#define TEMP_0_PIN 13 // Analog Input (D27)
#define TEMP_1_PIN 15 // Analog Input (1)
#define TEMP_BED_PIN 14 // Analog Input (1,2 or I2C)
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8 // 12
#define HEATER_2_PIN 11 // 13
#define HEATER_BED_PIN 10 // 14/15
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8 // 12
#define HEATER_2_PIN 11 // 13
#define HEATER_BED_PIN 10 // 14/15
#define FAN_PIN 7
#define FAN_PIN 7
//
// Misc. Functions
//
#define SDSS 11
#define LED_PIN 13
#define SOL1_PIN 16
#define SOL2_PIN 17
#define SDSS 11
#define LED_PIN 13
#define SOL1_PIN 16
#define SOL2_PIN 17
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */

72
Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h
View file

@ -38,9 +38,9 @@
//
// Limit Switches
//
#define X_STOP_PIN 47 // 'X Min'
#define Y_STOP_PIN 48 // 'Y Min'
#define Z_STOP_PIN 49 // 'Z Min'
#define X_STOP_PIN 47 // 'X Min'
#define Y_STOP_PIN 48 // 'Y Min'
#define Z_STOP_PIN 49 // 'Z Min'
//
// Steppers
@ -51,65 +51,65 @@
//
// X-axis signal-level connector
#define X_STEP_PIN 65
#define X_DIR_PIN 64
#define X_ENABLE_PIN 66 // Not actually used on Xeed, could be repurposed
#define X_STEP_PIN 65
#define X_DIR_PIN 64
#define X_ENABLE_PIN 66 // Not actually used on Xeed, could be repurposed
// Y-axis signal-level connector
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24 // Not actually used on Xeed, could be repurposed
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24 // Not actually used on Xeed, could be repurposed
// ZMOT connector (Front Right Z Motor)
#define Z_STEP_PIN 31
#define Z_DIR_PIN 32
#define Z_ENABLE_PIN 30
#define Z_STEP_PIN 31
#define Z_DIR_PIN 32
#define Z_ENABLE_PIN 30
// XMOT connector (Rear Z Motor)
#define Z2_STEP_PIN 28
#define Z2_DIR_PIN 63
#define Z2_ENABLE_PIN 29
#define Z2_STEP_PIN 28
#define Z2_DIR_PIN 63
#define Z2_ENABLE_PIN 29
// YMOT connector (Front Left Z Motor)
#define Z3_STEP_PIN 14
#define Z3_DIR_PIN 15
#define Z3_ENABLE_PIN 39
#define Z3_STEP_PIN 14
#define Z3_DIR_PIN 15
#define Z3_ENABLE_PIN 39
// EMOT2 connector
#define E0_STEP_PIN 37
#define E0_DIR_PIN 40
#define E0_ENABLE_PIN 36
#define E0_STEP_PIN 37
#define E0_DIR_PIN 40
#define E0_ENABLE_PIN 36
// EMOT connector
#define E1_STEP_PIN 34
#define E1_DIR_PIN 35
#define E1_ENABLE_PIN 33
#define E1_STEP_PIN 34
#define E1_DIR_PIN 35
#define E1_ENABLE_PIN 33
//
// Filament runout
//
#define FIL_RUNOUT_PIN 42 // ROT2 Connector
#define FIL_RUNOUT2_PIN 44 // ROT1 Connector
#define FIL_RUNOUT_PIN 42 // ROT2 Connector
#define FIL_RUNOUT2_PIN 44 // ROT1 Connector
//
// Temperature Sensors
//
#define TEMP_0_PIN 15 // T3 Connector
#define TEMP_1_PIN 13 // T1 Connector
#define TEMP_BED_PIN 14 // BED Connector (Between T1 and T3)
#define TEMP_0_PIN 15 // T3 Connector
#define TEMP_1_PIN 13 // T1 Connector
#define TEMP_BED_PIN 14 // BED Connector (Between T1 and T3)
//
// Heaters / Fans
//
#define HEATER_0_PIN 8 // Misc Connector, pins 3 and 4 (Out2)
#define HEATER_1_PIN 9 // Misc Connector, pins 5 and 6 (Out3)
#define HEATER_BED_PIN 6 // Misc Connector, pins 9(-) and 10(+) (OutA)
#define HEATER_0_PIN 8 // Misc Connector, pins 3 and 4 (Out2)
#define HEATER_1_PIN 9 // Misc Connector, pins 5 and 6 (Out3)
#define HEATER_BED_PIN 6 // Misc Connector, pins 9(-) and 10(+) (OutA)
#define FAN_PIN 10 // Misc Connector, pins 7(-) and 8 (+) (Out4)
#define FAN_PIN 10 // Misc Connector, pins 7(-) and 8 (+) (Out4)
#define LED_PIN 13
#define LED_PIN 13
#define SOL1_PIN 7 // Misc Connector, pins 1(-) and 2(+) (Out1)
#define SOL1_PIN 7 // Misc Connector, pins 1(-) and 2(+) (Out1)
// Door Closed Sensor
//#define DOOR_PIN 45 // HM1 Connector
//#define DOOR_PIN 45 // HM1 Connector

110
Marlin/src/pins/mega/pins_MEGACONTROLLER.h
View file

@ -36,89 +36,89 @@
//
// Servos
//
#define SERVO0_PIN 30
#define SERVO1_PIN 31
#define SERVO2_PIN 32
#define SERVO3_PIN 33
#define SERVO0_PIN 30
#define SERVO1_PIN 31
#define SERVO2_PIN 32
#define SERVO3_PIN 33
//
// Limit Switches
//
#define X_MIN_PIN 43
#define X_MAX_PIN 42
#define Y_MIN_PIN 38
#define Y_MAX_PIN 41
#define Z_MIN_PIN 40
#define Z_MAX_PIN 37
#define X_MIN_PIN 43
#define X_MAX_PIN 42
#define Y_MIN_PIN 38
#define Y_MAX_PIN 41
#define Z_MIN_PIN 40
#define Z_MAX_PIN 37
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 37
#define Z_MIN_PROBE_PIN 37
#endif
//
// Steppers
//
#define X_STEP_PIN 62 // A8
#define X_DIR_PIN 63 // A9
#define X_ENABLE_PIN 61 // A7
#define X_STEP_PIN 62 // A8
#define X_DIR_PIN 63 // A9
#define X_ENABLE_PIN 61 // A7
#define Y_STEP_PIN 65 // A11
#define Y_DIR_PIN 66 // A12
#define Y_ENABLE_PIN 64 // A10
#define Y_STEP_PIN 65 // A11
#define Y_DIR_PIN 66 // A12
#define Y_ENABLE_PIN 64 // A10
#define Z_STEP_PIN 68 // A14
#define Z_DIR_PIN 69 // A15
#define Z_ENABLE_PIN 67 // A13
#define Z_STEP_PIN 68 // A14
#define Z_DIR_PIN 69 // A15
#define Z_ENABLE_PIN 67 // A13
#define E0_STEP_PIN 23
#define E0_DIR_PIN 24
#define E0_ENABLE_PIN 22
#define E0_STEP_PIN 23
#define E0_DIR_PIN 24
#define E0_ENABLE_PIN 22
#define E1_STEP_PIN 26
#define E1_DIR_PIN 27
#define E1_ENABLE_PIN 25
#define E1_STEP_PIN 26
#define E1_DIR_PIN 27
#define E1_ENABLE_PIN 25
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // Analog Input
#define TEMP_0_PIN 4 // Analog Input
#else
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_0_PIN 0 // Analog Input
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // Analog Input
#define TEMP_1_PIN 5 // Analog Input
#else
#define TEMP_1_PIN 2 // Analog Input
#define TEMP_1_PIN 2 // Analog Input
#endif
#define TEMP_2_PIN 3 // Analog Input
#define TEMP_2_PIN 3 // Analog Input
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 6 // Analog Input
#define TEMP_BED_PIN 6 // Analog Input
#else
#define TEMP_BED_PIN 1 // Analog Input
#define TEMP_BED_PIN 1 // Analog Input
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 29
#define HEATER_1_PIN 34
#define HEATER_BED_PIN 28
#define HEATER_0_PIN 29
#define HEATER_1_PIN 34
#define HEATER_BED_PIN 28
#ifndef FAN_PIN
#define FAN_PIN 39
#define FAN_PIN 39
#endif
#define FAN1_PIN 35
#define FAN2_PIN 36
#define FAN1_PIN 35
#define FAN2_PIN 36
#ifndef CONTROLLER_FAN_PIN
#define CONTROLLER_FAN_PIN FAN2_PIN
#define CONTROLLER_FAN_PIN FAN2_PIN
#endif
#define FAN_SOFT_PWM
@ -126,39 +126,39 @@
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define CASE_LIGHT_PIN 2
#define SDSS 53
#define LED_PIN 13
#define CASE_LIGHT_PIN 2
//
// LCD / Controller
//
#if ENABLED(MINIPANEL)
#define BEEPER_PIN 46
#define BEEPER_PIN 46
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 47
#define DOGLCD_CS 45
#define LCD_BACKLIGHT_PIN 44 // backlight LED on PA3
#define DOGLCD_A0 47
#define DOGLCD_CS 45
#define LCD_BACKLIGHT_PIN 44 // backlight LED on PA3
#define KILL_PIN 12
#define KILL_PIN 12
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#define BTN_EN1 48
#define BTN_EN2 11
#define BTN_ENC 10
#define BTN_EN1 48
#define BTN_EN2 11
#define BTN_ENC 10
#define SD_DETECT_PIN 49
#define SD_DETECT_PIN 49
#endif // MINIPANEL
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 7 // Pullup!
#define SPINDLE_DIR_PIN 8
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 7 // Pullup!
#define SPINDLE_DIR_PIN 8

96
Marlin/src/pins/mega/pins_MEGATRONICS.h
View file

@ -33,99 +33,99 @@
//
// Limit Switches
//
#define X_MIN_PIN 41
#define X_MAX_PIN 37
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define X_MIN_PIN 41
#define X_MAX_PIN 37
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#define Z_MIN_PROBE_PIN 19
#endif
//
// Steppers
//
#define X_STEP_PIN 26
#define X_DIR_PIN 28
#define X_ENABLE_PIN 24
#define X_STEP_PIN 26
#define X_DIR_PIN 28
#define X_ENABLE_PIN 24
#define Y_STEP_PIN 60 // A6
#define Y_DIR_PIN 61 // A7
#define Y_ENABLE_PIN 22
#define Y_STEP_PIN 60 // A6
#define Y_DIR_PIN 61 // A7
#define Y_ENABLE_PIN 22
#define Z_STEP_PIN 54 // A0
#define Z_DIR_PIN 55 // A1
#define Z_ENABLE_PIN 56 // A2
#define Z_STEP_PIN 54 // A0
#define Z_DIR_PIN 55 // A1
#define Z_ENABLE_PIN 56 // A2
#define E0_STEP_PIN 31
#define E0_DIR_PIN 32
#define E0_ENABLE_PIN 38
#define E0_STEP_PIN 31
#define E0_DIR_PIN 32
#define E0_ENABLE_PIN 38
#define E1_STEP_PIN 34
#define E1_DIR_PIN 36
#define E1_ENABLE_PIN 30
#define E1_STEP_PIN 34
#define E1_DIR_PIN 36
#define E1_ENABLE_PIN 30
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 8 // Analog Input
#define TEMP_0_PIN 8 // Analog Input
#else
#define TEMP_0_PIN 13 // Analog Input
#define TEMP_0_PIN 13 // Analog Input
#endif
#define TEMP_1_PIN 15 // Analog Input
#define TEMP_BED_PIN 14 // Analog Input
#define TEMP_1_PIN 15 // Analog Input
#define TEMP_BED_PIN 14 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#ifndef FAN_PIN
#define FAN_PIN 7 // IO pin. Buffer needed
#define FAN_PIN 7 // IO pin. Buffer needed
#endif
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define CASE_LIGHT_PIN 2
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define CASE_LIGHT_PIN 2
//
// LCD / Controller
//
#define BEEPER_PIN 33
#define BEEPER_PIN 33
#if BOTH(ULTRA_LCD, NEWPANEL)
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
// Buttons directly attached to AUX-2
#define BTN_EN1 59
#define BTN_EN2 64
#define BTN_ENC 43
#define BTN_EN1 59
#define BTN_EN2 64
#define BTN_ENC 43
#define SD_DETECT_PIN -1 // RAMPS doesn't use this
#define SD_DETECT_PIN -1 // RAMPS doesn't use this
#endif // HAS_SPI_LCD && NEWPANEL
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 4 // Pullup!
#define SPINDLE_DIR_PIN 11
#define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 4 // Pullup!
#define SPINDLE_DIR_PIN 11

114
Marlin/src/pins/mega/pins_MEGATRONICS_2.h
View file

@ -33,120 +33,120 @@
//
// Limit Switches
//
#define X_MIN_PIN 37
#define X_MAX_PIN 40
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define X_MIN_PIN 37
#define X_MAX_PIN 40
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#define Z_MIN_PROBE_PIN 19
#endif
//
// Steppers
//
#define X_STEP_PIN 26
#define X_DIR_PIN 27
#define X_ENABLE_PIN 25
#define X_STEP_PIN 26
#define X_DIR_PIN 27
#define X_ENABLE_PIN 25
#define Y_STEP_PIN 4 // A6
#define Y_DIR_PIN 54 // A0
#define Y_ENABLE_PIN 5
#define Y_STEP_PIN 4 // A6
#define Y_DIR_PIN 54 // A0
#define Y_ENABLE_PIN 5
#define Z_STEP_PIN 56 // A2
#define Z_DIR_PIN 60 // A6
#define Z_ENABLE_PIN 55 // A1
#define Z_STEP_PIN 56 // A2
#define Z_DIR_PIN 60 // A6
#define Z_ENABLE_PIN 55 // A1
#define E0_STEP_PIN 35
#define E0_DIR_PIN 36
#define E0_ENABLE_PIN 34
#define E0_STEP_PIN 35
#define E0_DIR_PIN 36
#define E0_ENABLE_PIN 34
#define E1_STEP_PIN 29
#define E1_DIR_PIN 39
#define E1_ENABLE_PIN 28
#define E1_STEP_PIN 29
#define E1_DIR_PIN 39
#define E1_ENABLE_PIN 28
#define E2_STEP_PIN 23 // ? schematic says 24
#define E2_DIR_PIN 24 // ? schematic says 23
#define E2_ENABLE_PIN 22
#define E2_STEP_PIN 23 // ? schematic says 24
#define E2_DIR_PIN 24 // ? schematic says 23
#define E2_ENABLE_PIN 22
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // Analog Input
#define TEMP_0_PIN 4 // Analog Input
#else
#define TEMP_0_PIN 13 // Analog Input
#define TEMP_0_PIN 13 // Analog Input
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 8 // Analog Input
#define TEMP_1_PIN 8 // Analog Input
#else
#define TEMP_1_PIN 15 // Analog Input
#define TEMP_1_PIN 15 // Analog Input
#endif
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // Analog Input
#define TEMP_BED_PIN 8 // Analog Input
#else
#define TEMP_BED_PIN 14 // Analog Input
#define TEMP_BED_PIN 14 // Analog Input
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#ifndef FAN_PIN
#define FAN_PIN 7
#define FAN_PIN 7
#endif
#define FAN1_PIN 6
#define FAN1_PIN 6
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define CASE_LIGHT_PIN 2
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define CASE_LIGHT_PIN 2
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 16 // Pullup!
#define SPINDLE_DIR_PIN 11
#define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 16 // Pullup!
#define SPINDLE_DIR_PIN 11
//
// LCD / Controller
//
#define BEEPER_PIN 64
#define BEEPER_PIN 64
#if HAS_SPI_LCD
#define LCD_PINS_RS 14
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 30
#define LCD_PINS_D5 31
#define LCD_PINS_D6 32
#define LCD_PINS_D7 33
#define LCD_PINS_RS 14
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 30
#define LCD_PINS_D5 31
#define LCD_PINS_D6 32
#define LCD_PINS_D7 33
#if ENABLED(NEWPANEL)
// Buttons are directly attached using keypad
#define BTN_EN1 61
#define BTN_EN2 59
#define BTN_ENC 43
#define BTN_EN1 61
#define BTN_EN2 59
#define BTN_ENC 43
#else
// Buttons attached to shift register of reprapworld keypad v1.1
#define SHIFT_CLK 63
#define SHIFT_LD 42
#define SHIFT_OUT 17
#define SHIFT_EN 17
#define SHIFT_CLK 63
#define SHIFT_LD 42
#define SHIFT_OUT 17
#define SHIFT_EN 17
#endif
#endif // HAS_SPI_LCD

164
Marlin/src/pins/mega/pins_MEGATRONICS_3.h
View file

@ -40,132 +40,132 @@
//
// Servos
//
#define SERVO0_PIN 46 // AUX3-6
#define SERVO1_PIN 47 // AUX3-5
#define SERVO2_PIN 48 // AUX3-4
#define SERVO3_PIN 49 // AUX3-3
#define SERVO0_PIN 46 // AUX3-6
#define SERVO1_PIN 47 // AUX3-5
#define SERVO2_PIN 48 // AUX3-4
#define SERVO3_PIN 49 // AUX3-3
//
// Limit Switches
//
#define X_MIN_PIN 37 // No INT
#define X_MAX_PIN 40 // No INT
#define Y_MIN_PIN 41 // No INT
#define Y_MAX_PIN 38 // No INT
#define Z_MIN_PIN 18 // No INT
#define Z_MAX_PIN 19 // No INT
#define X_MIN_PIN 37 // No INT
#define X_MAX_PIN 40 // No INT
#define Y_MIN_PIN 41 // No INT
#define Y_MAX_PIN 38 // No INT
#define Z_MIN_PIN 18 // No INT
#define Z_MAX_PIN 19 // No INT
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#define Z_MIN_PROBE_PIN 19
#endif
//
// Steppers
//
#define X_STEP_PIN 58
#define X_DIR_PIN 57
#define X_ENABLE_PIN 59
#define X_STEP_PIN 58
#define X_DIR_PIN 57
#define X_ENABLE_PIN 59
#define Y_STEP_PIN 5
#define Y_DIR_PIN 17
#define Y_ENABLE_PIN 4
#define Y_STEP_PIN 5
#define Y_DIR_PIN 17
#define Y_ENABLE_PIN 4
#define Z_STEP_PIN 16
#define Z_DIR_PIN 11
#define Z_ENABLE_PIN 3
#define Z_STEP_PIN 16
#define Z_DIR_PIN 11
#define Z_ENABLE_PIN 3
#define E0_STEP_PIN 28
#define E0_DIR_PIN 27
#define E0_ENABLE_PIN 29
#define E0_STEP_PIN 28
#define E0_DIR_PIN 27
#define E0_ENABLE_PIN 29
#define E1_STEP_PIN 25
#define E1_DIR_PIN 24
#define E1_ENABLE_PIN 26
#define E1_STEP_PIN 25
#define E1_DIR_PIN 24
#define E1_ENABLE_PIN 26
#define E2_STEP_PIN 22
#define E2_DIR_PIN 60
#define E2_ENABLE_PIN 23
#define E2_STEP_PIN 22
#define E2_DIR_PIN 60
#define E2_ENABLE_PIN 23
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 11 // Analog Input
#define TEMP_0_PIN 11 // Analog Input
#else
#define TEMP_0_PIN 15 // Analog Input
#define TEMP_0_PIN 15 // Analog Input
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 10 // Analog Input
#define TEMP_1_PIN 10 // Analog Input
#else
#define TEMP_1_PIN 13 // Analog Input
#define TEMP_1_PIN 13 // Analog Input
#endif
#if TEMP_SENSOR_2 == -1
#define TEMP_2_PIN 9 // Analog Input
#define TEMP_2_PIN 9 // Analog Input
#else
#define TEMP_2_PIN 12 // Analog Input
#define TEMP_2_PIN 12 // Analog Input
#endif
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // Analog Input
#define TEMP_BED_PIN 8 // Analog Input
#else
#define TEMP_BED_PIN 14 // Analog Input
#define TEMP_BED_PIN 14 // Analog Input
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 9
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 10
#define HEATER_0_PIN 2
#define HEATER_1_PIN 9
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 10
#ifndef FAN_PIN
#define FAN_PIN 6
#define FAN_PIN 6
#endif
#define FAN1_PIN 7
#define FAN1_PIN 7
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define CASE_LIGHT_PIN 45 // Try the keypad connector
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define CASE_LIGHT_PIN 45 // Try the keypad connector
//
// LCD / Controller
//
#define BEEPER_PIN 61
#define BEEPER_PIN 61
#define BTN_EN1 44
#define BTN_EN2 45
#define BTN_ENC 33
#define BTN_EN1 44
#define BTN_EN2 45
#define BTN_ENC 33
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 56 // CS chip select / SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#define SD_DETECT_PIN 35
#define LCD_PINS_RS 56 // CS chip select / SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#define SD_DETECT_PIN 35
#else
#define LCD_PINS_RS 32
#define LCD_PINS_ENABLE 31
#define LCD_PINS_D4 14
#define LCD_PINS_D5 30
#define LCD_PINS_D6 39
#define LCD_PINS_D7 15
#define LCD_PINS_RS 32
#define LCD_PINS_ENABLE 31
#define LCD_PINS_D4 14
#define LCD_PINS_D5 30
#define LCD_PINS_D6 39
#define LCD_PINS_D7 15
#define SHIFT_CLK 43
#define SHIFT_LD 35
#define SHIFT_OUT 34
#define SHIFT_EN 44
#define SHIFT_CLK 43
#define SHIFT_LD 35
#define SHIFT_OUT 34
#define SHIFT_EN 44
#if MB(MEGATRONICS_31, MEGATRONICS_32)
#define SD_DETECT_PIN 56
#define SD_DETECT_PIN 56
#endif
#endif
@ -173,23 +173,23 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#if DISABLED(REPRAPWORLD_KEYPAD) // try to use the keypad connector first
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 43 // Pullup!
#define SPINDLE_DIR_PIN 42
#if DISABLED(REPRAPWORLD_KEYPAD) // try to use the keypad connector first
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 43 // Pullup!
#define SPINDLE_DIR_PIN 42
#elif EXTRUDERS <= 2
// Hijack the last extruder so that we can get the PWM signal off the Y breakout
// Move Y to the E2 plug. This makes dual Y steppers harder
#undef Y_ENABLE_PIN // 4
#undef Y_STEP_PIN // 5
#undef Y_DIR_PIN // 17
#undef E2_ENABLE_PIN // 23
#undef E2_STEP_PIN // 22
#undef E2_DIR_PIN // 60
#define Y_ENABLE_PIN 23
#define Y_STEP_PIN 22
#define Y_DIR_PIN 60
#define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 17 // Pullup!
#define SPINDLE_DIR_PIN 5
#undef Y_ENABLE_PIN // 4
#undef Y_STEP_PIN // 5
#undef Y_DIR_PIN // 17
#undef E2_ENABLE_PIN // 23
#undef E2_STEP_PIN // 22
#undef E2_DIR_PIN // 60
#define Y_ENABLE_PIN 23
#define Y_STEP_PIN 22
#define Y_DIR_PIN 60
#define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM
#define SPINDLE_LASER_ENA_PIN 17 // Pullup!
#define SPINDLE_DIR_PIN 5
#endif

204
Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h
View file

@ -47,60 +47,60 @@
//
// Servos
//
#define SERVO0_PIN 36 // C1 (1280-EX1)
#define SERVO1_PIN 37 // C0 (1280-EX2)
#define SERVO2_PIN 40 // G1 (1280-EX3)
#define SERVO3_PIN 41 // G0 (1280-EX4)
#define SERVO0_PIN 36 // C1 (1280-EX1)
#define SERVO1_PIN 37 // C0 (1280-EX2)
#define SERVO2_PIN 40 // G1 (1280-EX3)
#define SERVO3_PIN 41 // G0 (1280-EX4)
//
// Limit Switches
//
#define X_MIN_PIN 49 // L0
#define X_MAX_PIN 48 // L1
#define Y_MIN_PIN 47 // L2
#define Y_MAX_PIN 46 // L3
#define Z_MIN_PIN 43 // L6
#define Z_MAX_PIN 42 // L7
#define X_MIN_PIN 49 // L0
#define X_MAX_PIN 48 // L1
#define Y_MIN_PIN 47 // L2
#define Y_MAX_PIN 46 // L3
#define Z_MIN_PIN 43 // L6
#define Z_MAX_PIN 42 // L7
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 42
#define Z_MIN_PROBE_PIN 42
#endif
//
// Filament Runout Pins
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 49
#define FIL_RUNOUT_PIN 49
#endif
#ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN 47
#define FIL_RUNOUT2_PIN 47
#endif
//
// Steppers
//
#define X_STEP_PIN 55 // F1
#define X_DIR_PIN 54 // F0
#define X_ENABLE_PIN 56 // F2
#define X_STEP_PIN 55 // F1
#define X_DIR_PIN 54 // F0
#define X_ENABLE_PIN 56 // F2
#define Y_STEP_PIN 59 // F5
#define Y_DIR_PIN 58 // F4
#define Y_ENABLE_PIN 60 // F6
#define Y_STEP_PIN 59 // F5
#define Y_DIR_PIN 58 // F4
#define Y_ENABLE_PIN 60 // F6
#define Z_STEP_PIN 63 // K1
#define Z_DIR_PIN 62 // K0
#define Z_ENABLE_PIN 64 // K2
#define Z_STEP_PIN 63 // K1
#define Z_DIR_PIN 62 // K0
#define Z_ENABLE_PIN 64 // K2
#define E0_STEP_PIN 25 // A3
#define E0_DIR_PIN 24 // A2
#define E0_ENABLE_PIN 26 // A4
#define E0_STEP_PIN 25 // A3
#define E0_DIR_PIN 24 // A2
#define E0_ENABLE_PIN 26 // A4
#define E1_STEP_PIN 29 // A7
#define E1_DIR_PIN 28 // A6
#define E1_ENABLE_PIN 39 // G2
#define E1_STEP_PIN 29 // A7
#define E1_DIR_PIN 28 // A6
#define E1_ENABLE_PIN 39 // G2
//
// I2C Digipots - MCP4018
@ -108,22 +108,22 @@
// Set from 0 - 127 with stop bit.
// (Ex. 3F << 1 | 1)
//
#define DIGIPOTS_I2C_SCL 76 // J5
#define DIGIPOTS_I2C_SDA_X 57 // F3
#define DIGIPOTS_I2C_SDA_Y 61 // F7
#define DIGIPOTS_I2C_SDA_Z 65 // K3
#define DIGIPOTS_I2C_SDA_E0 27 // A5
#define DIGIPOTS_I2C_SDA_E1 77 // J6
#define DIGIPOTS_I2C_SCL 76 // J5
#define DIGIPOTS_I2C_SDA_X 57 // F3
#define DIGIPOTS_I2C_SDA_Y 61 // F7
#define DIGIPOTS_I2C_SDA_Z 65 // K3
#define DIGIPOTS_I2C_SDA_E0 27 // A5
#define DIGIPOTS_I2C_SDA_E1 77 // J6
#ifndef DIGIPOT_I2C_ADDRESS_A
#define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1)
#define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1)
#endif
//
// Temperature Sensors
//
// K7 - 69 / ADC15 - 15
#define TEMP_BED_PIN 15
#define TEMP_BED_PIN 15
// SPI for Max6675 or Max31855 Thermocouple
// Uses a separate SPI bus
@ -133,15 +133,15 @@
// 2 E4 CS2
// 78 E2 SCK
//
#define THERMO_SCK_PIN 78 // E2
#define THERMO_DO_PIN 3 // E5
#define THERMO_CS1_PIN 5 // E3
#define THERMO_CS2_PIN 2 // E4
#define THERMO_SCK_PIN 78 // E2
#define THERMO_DO_PIN 3 // E5
#define THERMO_CS1_PIN 5 // E3
#define THERMO_CS2_PIN 2 // E4
#define MAX6675_SS_PIN THERMO_CS1_PIN
#define MAX6675_SS2_PIN THERMO_CS2_PIN
#define MAX6675_SCK_PIN THERMO_SCK_PIN
#define MAX6675_DO_PIN THERMO_DO_PIN
#define MAX6675_SS_PIN THERMO_CS1_PIN
#define MAX6675_SS2_PIN THERMO_CS2_PIN
#define MAX6675_SCK_PIN THERMO_SCK_PIN
#define MAX6675_DO_PIN THERMO_DO_PIN
//
// Augmentation for auto-assigning plugs
@ -152,12 +152,12 @@
//
// Labels from the schematic:
#define EX1_HEAT_PIN 6 // H3
#define EX1_FAN_PIN 7 // H4
#define EX2_HEAT_PIN 11 // B5
#define EX2_FAN_PIN 12 // B6
#define HBP_PIN 45 // L4
#define EXTRA_FET_PIN 44 // L5
#define EX1_HEAT_PIN 6 // H3
#define EX1_FAN_PIN 7 // H4
#define EX2_HEAT_PIN 11 // B5
#define EX2_FAN_PIN 12 // B6
#define HBP_PIN 45 // L4
#define EXTRA_FET_PIN 44 // L5
#if HOTENDS > 1
#if TEMP_SENSOR_BED
@ -174,35 +174,35 @@
//
// Heaters / Fans (24V)
//
#define HEATER_0_PIN EX1_HEAT_PIN
#define HEATER_0_PIN EX1_HEAT_PIN
#if ENABLED(IS_EFB) // Hotend, Fan, Bed
#define HEATER_BED_PIN HBP_PIN
#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN EX2_HEAT_PIN
#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN EX2_HEAT_PIN
#define HEATER_BED_PIN HBP_PIN
#elif ENABLED(IS_EFF) // Hotend, Fan, Fan
#define FAN1_PIN HBP_PIN
#if ENABLED(IS_EFB) // Hotend, Fan, Bed
#define HEATER_BED_PIN HBP_PIN
#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN EX2_HEAT_PIN
#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN EX2_HEAT_PIN
#define HEATER_BED_PIN HBP_PIN
#elif ENABLED(IS_EFF) // Hotend, Fan, Fan
#define FAN1_PIN HBP_PIN
#endif
#ifndef FAN_PIN
#if EITHER(IS_EFB, IS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN EX2_HEAT_PIN
#define FAN_PIN EX2_HEAT_PIN
#elif EITHER(IS_EEF, IS_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN HBP_PIN
#define FAN_PIN HBP_PIN
#else
#define FAN_PIN EXTRA_FET_PIN
#define FAN_PIN EXTRA_FET_PIN
#endif
#endif
//
// Misc. Functions
//
#define LED_PIN 13 // B7
#define CUTOFF_RESET_PIN 16 // H1
#define CUTOFF_TEST_PIN 17 // H0
#define LED_PIN 13 // B7
#define CUTOFF_RESET_PIN 16 // H1
#define CUTOFF_TEST_PIN 17 // H0
//
// LCD / Controller
@ -211,57 +211,57 @@
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCD_PINS_RS 33 // C4: LCD-STROBE
#define LCD_PINS_ENABLE 72 // J2: LEFT
#define LCD_PINS_D4 35 // C2: LCD-CLK
#define LCD_PINS_D5 32 // C5: RLED
#define LCD_PINS_D6 34 // C3: LCD-DATA
#define LCD_PINS_D7 31 // C6: GLED
#define LCD_PINS_RS 33 // C4: LCD-STROBE
#define LCD_PINS_ENABLE 72 // J2: LEFT
#define LCD_PINS_D4 35 // C2: LCD-CLK
#define LCD_PINS_D5 32 // C5: RLED
#define LCD_PINS_D6 34 // C3: LCD-DATA
#define LCD_PINS_D7 31 // C6: GLED
#define BTN_EN2 75 // J4, UP
#define BTN_EN1 73 // J3, DOWN
#define BTN_EN2 75 // J4, UP
#define BTN_EN1 73 // J3, DOWN
//STOP button connected as KILL_PIN
#define KILL_PIN 14 // J1, RIGHT
#define KILL_PIN 14 // J1, RIGHT
//KILL - not connected
#define BEEPER_PIN 8 // H5, SD_WP
#define BEEPER_PIN 8 // H5, SD_WP
//on board leds
#define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
#define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
#define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
#define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
#else
// Replicator uses a 3-wire SR controller with HD44780
#define SR_DATA_PIN 34 // C3
#define SR_CLK_PIN 35 // C2
#define SR_STROBE_PIN 33 // C4
#define SR_DATA_PIN 34 // C3
#define SR_CLK_PIN 35 // C2
#define SR_STROBE_PIN 33 // C4
#define BTN_UP 75 // J4
#define BTN_DWN 73 // J3
#define BTN_LFT 72 // J2
#define BTN_RT 14 // J1
#define BTN_UP 75 // J4
#define BTN_DWN 73 // J3
#define BTN_LFT 72 // J2
#define BTN_RT 14 // J1
// Disable encoder
#undef BTN_EN1
#undef BTN_EN2
#define BEEPER_PIN 4 // G5
#define BEEPER_PIN 4 // G5
#define STAT_LED_RED_PIN 32 // C5
#define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
#define STAT_LED_RED_PIN 32 // C5
#define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
#endif
#define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER
#define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER
#endif // HAS_SPI_LCD
//
// SD Card
//
#define SDSS 53 // B0
#define SD_DETECT_PIN 9 // H6
#define SDSS 53 // B0
#define SD_DETECT_PIN 9 // H6
//
// TMC 220x
@ -280,19 +280,19 @@
* Software serial
*/
#define X_SERIAL_TX_PIN 16
#define X_SERIAL_RX_PIN 17
#define X_SERIAL_TX_PIN 16
#define X_SERIAL_RX_PIN 17
#define Y_SERIAL_TX_PIN 18
#define Y_SERIAL_RX_PIN 19
#define Y_SERIAL_TX_PIN 18
#define Y_SERIAL_RX_PIN 19
#define Z_SERIAL_TX_PIN 41
#define Z_SERIAL_RX_PIN 66
#define Z_SERIAL_TX_PIN 41
#define Z_SERIAL_RX_PIN 66
#define E0_SERIAL_TX_PIN 40
#define E0_SERIAL_RX_PIN 67
#define E0_SERIAL_TX_PIN 40
#define E0_SERIAL_RX_PIN 67
#define E1_SERIAL_TX_PIN 37
#define E1_SERIAL_RX_PIN 68
#define E1_SERIAL_TX_PIN 37
#define E1_SERIAL_RX_PIN 68
#endif

108
Marlin/src/pins/mega/pins_MINITRONICS.h
View file

@ -42,102 +42,102 @@
//
// Limit Switches
//
#define X_MIN_PIN 5
#define X_MAX_PIN 2
#define Y_MIN_PIN 2
#define Y_MAX_PIN 15
#define Z_MIN_PIN 6
#define Z_MAX_PIN -1
#define X_MIN_PIN 5
#define X_MAX_PIN 2
#define Y_MIN_PIN 2
#define Y_MAX_PIN 15
#define Z_MIN_PIN 6
#define Z_MAX_PIN -1
//
// Steppers
//
#define X_STEP_PIN 48
#define X_DIR_PIN 47
#define X_ENABLE_PIN 49
#define X_STEP_PIN 48
#define X_DIR_PIN 47
#define X_ENABLE_PIN 49
#define Y_STEP_PIN 39 // A6
#define Y_DIR_PIN 40 // A0
#define Y_ENABLE_PIN 38
#define Y_STEP_PIN 39 // A6
#define Y_DIR_PIN 40 // A0
#define Y_ENABLE_PIN 38
#define Z_STEP_PIN 42 // A2
#define Z_DIR_PIN 43 // A6
#define Z_ENABLE_PIN 41 // A1
#define Z_STEP_PIN 42 // A2
#define Z_DIR_PIN 43 // A6
#define Z_ENABLE_PIN 41 // A1
#define E0_STEP_PIN 45
#define E0_DIR_PIN 44
#define E0_ENABLE_PIN 27
#define E0_STEP_PIN 45
#define E0_DIR_PIN 44
#define E0_ENABLE_PIN 27
#define E1_STEP_PIN 36
#define E1_DIR_PIN 35
#define E1_ENABLE_PIN 37
#define E1_STEP_PIN 36
#define E1_DIR_PIN 35
#define E1_ENABLE_PIN 37
//
// Temperature Sensors
//
#define TEMP_0_PIN 7 // Analog Input
#define TEMP_1_PIN 6 // Analog Input
#define TEMP_BED_PIN 6 // Analog Input
#define TEMP_0_PIN 7 // Analog Input
#define TEMP_1_PIN 6 // Analog Input
#define TEMP_BED_PIN 6 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED
#define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED
#ifndef FAN_PIN
#define FAN_PIN 9
#define FAN_PIN 9
#endif
//
// Misc. Functions
//
#define SDSS 16
#define LED_PIN 46
#define SDSS 16
#define LED_PIN 46
//
// LCD / Controller
//
#define BEEPER_PIN -1
#define BEEPER_PIN -1
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 15 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 11 // SID (MOSI)
#define LCD_PINS_D4 10 // SCK (CLK) clock
#define LCD_PINS_RS 15 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 11 // SID (MOSI)
#define LCD_PINS_D4 10 // SCK (CLK) clock
#define BTN_EN1 18
#define BTN_EN2 17
#define BTN_ENC 25
#define BTN_EN1 18
#define BTN_EN2 17
#define BTN_ENC 25
#define SD_DETECT_PIN 30
#define SD_DETECT_PIN 30
#else
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
// Buttons are directly attached using keypad
#define BTN_EN1 -1
#define BTN_EN2 -1
#define BTN_ENC -1
#define BTN_EN1 -1
#define BTN_EN2 -1
#define BTN_ENC -1
#define SD_DETECT_PIN -1 // Minitronics doesn't use this
#define SD_DETECT_PIN -1 // Minitronics doesn't use this
#endif
//
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER // assumes we're only doing CNC work (no 3D printing)
#if HAS_CUTTER // assumes we're only doing CNC work (no 3D printing)
#undef HEATER_BED_PIN
#undef TEMP_BED_PIN // need to free up some pins but also need to
#undef TEMP_0_PIN // re-assign them (to unused pins) because Marlin
#undef TEMP_1_PIN // requires the presence of certain pins or else it
#define HEATER_BED_PIN 4 // won't compile
#define TEMP_BED_PIN 50
#define TEMP_0_PIN 51
#define SPINDLE_LASER_ENA_PIN 52 // using A6 because it already has a pullup
#define SPINDLE_LASER_PWM_PIN 3 // WARNING - LED & resistor pull up to +12/+24V stepper voltage
#define SPINDLE_DIR_PIN 53
#undef TEMP_BED_PIN // need to free up some pins but also need to
#undef TEMP_0_PIN // re-assign them (to unused pins) because Marlin
#undef TEMP_1_PIN // requires the presence of certain pins or else it
#define HEATER_BED_PIN 4 // won't compile
#define TEMP_BED_PIN 50
#define TEMP_0_PIN 51
#define SPINDLE_LASER_ENA_PIN 52 // using A6 because it already has a pullup
#define SPINDLE_LASER_PWM_PIN 3 // WARNING - LED & resistor pull up to +12/+24V stepper voltage
#define SPINDLE_DIR_PIN 53
#endif

100
Marlin/src/pins/mega/pins_OVERLORD.h
View file

@ -37,83 +37,83 @@
//
// Limit Switches
//
#define X_STOP_PIN 24
#define Y_STOP_PIN 28
#define Z_MIN_PIN 46
#define Z_MAX_PIN 32
#define X_STOP_PIN 24
#define Y_STOP_PIN 28
#define Z_MIN_PIN 46
#define Z_MAX_PIN 32
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 46 // JP4, Tfeed1
#define Z_MIN_PROBE_PIN 46 // JP4, Tfeed1
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_PIN 44 // JP3, Tfeed2
#define FIL_RUNOUT_PIN 44 // JP3, Tfeed2
#endif
//
// Steppers
//
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 37
#define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35
#define Z_STEP_PIN 37
#define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35
#define E0_STEP_PIN 43
#define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41
#define E0_STEP_PIN 43
#define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
//
// Temperature Sensors
//
#define TEMP_0_PIN 8 // Analog Input
#define TEMP_1_PIN 9 // Analog Input - Redundant temp sensor
#define TEMP_2_PIN 12 // Analog Input
#define TEMP_3_PIN 14 // Analog Input
#define TEMP_BED_PIN 10 // Analog Input
#define TEMP_0_PIN 8 // Analog Input
#define TEMP_1_PIN 9 // Analog Input - Redundant temp sensor
#define TEMP_2_PIN 12 // Analog Input
#define TEMP_3_PIN 14 // Analog Input
#define TEMP_BED_PIN 10 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 7 // material cooling fan
#define FAN_PIN 7 // material cooling fan
//
// SD Card
//
#define SDSS 53
#define SD_DETECT_PIN 38
#define SDSS 53
#define SD_DETECT_PIN 38
//
// Misc. Functions
//
#define LED_PIN 13 // On PCB status led
#define PS_ON_PIN 12 // For stepper/heater/fan power. Active HIGH.
#define POWER_LOSS_PIN 34 // Power check - whether hotends/steppers/fans have power
#define LED_PIN 13 // On PCB status led
#define PS_ON_PIN 12 // For stepper/heater/fan power. Active HIGH.
#define POWER_LOSS_PIN 34 // Power check - whether hotends/steppers/fans have power
#if ENABLED(BATTERY_STATUS_AVAILABLE)
#undef BATTERY_STATUS_PIN
#define BATTERY_STATUS_PIN 26 // Status of power loss battery, whether it is charged (low) or charging (high)
#define BATTERY_STATUS_PIN 26 // Status of power loss battery, whether it is charged (low) or charging (high)
#endif
#if ENABLED(INPUT_VOLTAGE_AVAILABLE)
#undef VOLTAGE_DETECTION_PIN
#define VOLTAGE_DETECTION_PIN 11 // Analog Input - ADC Voltage level of main input
#define VOLTAGE_DETECTION_PIN 11 // Analog Input - ADC Voltage level of main input
#endif
//
@ -121,24 +121,24 @@
//
#if HAS_GRAPHICAL_LCD
// OVERLORD OLED pins
#define LCD_PINS_RS 20
#define LCD_PINS_D5 21
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 14
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#define LCD_PINS_RS 20
#define LCD_PINS_D5 21
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 14
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#ifndef LCD_RESET_PIN
#define LCD_RESET_PIN 5 // LCD_PINS_D6
#define LCD_RESET_PIN 5 // LCD_PINS_D6
#endif
#endif
#if ENABLED(NEWPANEL)
#define BTN_ENC 16 // Enter Pin
#define BTN_UP 19 // Button UP Pin
#define BTN_DWN 17 // Button DOWN Pin
#define BTN_ENC 16 // Enter Pin
#define BTN_UP 19 // Button UP Pin
#define BTN_DWN 17 // Button DOWN Pin
#endif
// Additional connectors/pins on the Overlord V1.X board
#define PCB_VERSION_PIN 22
#define APPROACH_PIN 11 // JP7, Tpd
#define GATE_PIN 36 // Threshold, JP6, Tg
#define PCB_VERSION_PIN 22
#define APPROACH_PIN 11 // JP7, Tpd
#define GATE_PIN 36 // Threshold, JP6, Tg

96
Marlin/src/pins/mega/pins_PICA.h
View file

@ -49,95 +49,95 @@
//
// Limit Switches
//
#define X_MIN_PIN 14
#define X_MAX_PIN 15
#define Y_MIN_PIN 16
#define Y_MAX_PIN 17
#define Z_MIN_PIN 23
#define Z_MAX_PIN 22
#define X_MIN_PIN 14
#define X_MAX_PIN 15
#define Y_MIN_PIN 16
#define Y_MAX_PIN 17
#define Z_MIN_PIN 23
#define Z_MAX_PIN 22
//
// Steppers
//
#define X_STEP_PIN 55
#define X_DIR_PIN 54
#define X_ENABLE_PIN 60
#define X_STEP_PIN 55
#define X_DIR_PIN 54
#define X_ENABLE_PIN 60
#define Y_STEP_PIN 57
#define Y_DIR_PIN 56
#define Y_ENABLE_PIN 61
#define Y_STEP_PIN 57
#define Y_DIR_PIN 56
#define Y_ENABLE_PIN 61
#define Z_STEP_PIN 59
#define Z_DIR_PIN 58
#define Z_ENABLE_PIN 62
#define Z_STEP_PIN 59
#define Z_DIR_PIN 58
#define Z_ENABLE_PIN 62
#define E0_STEP_PIN 67
#define E0_DIR_PIN 24
#define E0_ENABLE_PIN 26
#define E0_STEP_PIN 67
#define E0_DIR_PIN 24
#define E0_ENABLE_PIN 26
//
// Temperature Sensors
//
#define TEMP_0_PIN 9 // Analog Input
#define TEMP_1_PIN 10
#define TEMP_BED_PIN 10
#define TEMP_2_PIN 11
#define TEMP_3_PIN 12
#define TEMP_0_PIN 9 // Analog Input
#define TEMP_1_PIN 10
#define TEMP_BED_PIN 10
#define TEMP_2_PIN 11
#define TEMP_3_PIN 12
//
// Heaters / Fans
//
#ifndef HEATER_0_PIN
#define HEATER_0_PIN 10 // E0
#define HEATER_0_PIN 10 // E0
#endif
#ifndef HEATER_1_PIN
#define HEATER_1_PIN 2 // E1
#define HEATER_1_PIN 2 // E1
#endif
#define HEATER_BED_PIN 8 // HEAT-BED
#define HEATER_BED_PIN 8 // HEAT-BED
#ifndef FAN_PIN
#define FAN_PIN 9
#define FAN_PIN 9
#endif
#ifndef FAN_2_PIN
#define FAN_2_PIN 7
#define FAN_2_PIN 7
#endif
#define SDPOWER_PIN -1
#define LED_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#define SDPOWER_PIN -1
#define LED_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#define SSR_PIN 6
#define SSR_PIN 6
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card
#define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card
#else
#define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN)
#define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN)
#endif
//
// SD Support
//
#define SD_DETECT_PIN 49
#define SDSS 53
#define SD_DETECT_PIN 49
#define SDSS 53
//
// LCD / Controller
//
#define BEEPER_PIN 29
#define BEEPER_PIN 29
#if HAS_SPI_LCD
#define LCD_PINS_RS 33
#define LCD_PINS_ENABLE 30
#define LCD_PINS_D4 35
#define LCD_PINS_D5 32
#define LCD_PINS_D6 37
#define LCD_PINS_D7 36
#define LCD_PINS_RS 33
#define LCD_PINS_ENABLE 30
#define LCD_PINS_D4 35
#define LCD_PINS_D5 32
#define LCD_PINS_D6 37
#define LCD_PINS_D7 36
#define BTN_EN1 47
#define BTN_EN2 48
#define BTN_ENC 31
#define BTN_EN1 47
#define BTN_EN2 48
#define BTN_ENC 31
#define LCD_SDSS 53
#define LCD_SDSS 53
#endif

8
Marlin/src/pins/mega/pins_PICAOLD.h
View file

@ -20,9 +20,9 @@
*
*/
#define HEATER_0_PIN 9 // E0
#define HEATER_1_PIN 10 // E1
#define FAN_PIN 11
#define FAN2_PIN 12
#define HEATER_0_PIN 9 // E0
#define HEATER_1_PIN 10 // E1
#define FAN_PIN 11
#define FAN2_PIN 12
#include "pins_PICA.h"

84
Marlin/src/pins/mega/pins_SILVER_GATE.h
View file

@ -27,67 +27,67 @@
#define BOARD_INFO_NAME "Silver Gate"
#define X_STEP_PIN 43
#define X_DIR_PIN 44
#define X_ENABLE_PIN 42
#define X_MIN_PIN 31
#define X_MAX_PIN 34
#define X_STEP_PIN 43
#define X_DIR_PIN 44
#define X_ENABLE_PIN 42
#define X_MIN_PIN 31
#define X_MAX_PIN 34
#define Y_STEP_PIN 40
#define Y_DIR_PIN 41
#define Y_ENABLE_PIN 39
#define Y_MIN_PIN 32
#define Y_MAX_PIN 35
#define Y_STEP_PIN 40
#define Y_DIR_PIN 41
#define Y_ENABLE_PIN 39
#define Y_MIN_PIN 32
#define Y_MAX_PIN 35
#define Z_STEP_PIN 13
#define Z_DIR_PIN 38
#define Z_ENABLE_PIN 14
#define Z_MIN_PIN 33
#define Z_MAX_PIN 36
#define Z_STEP_PIN 13
#define Z_DIR_PIN 38
#define Z_ENABLE_PIN 14
#define Z_MIN_PIN 33
#define Z_MAX_PIN 36
#define E0_STEP_PIN 27
#define E0_DIR_PIN 37
#define E0_ENABLE_PIN 45
#define E0_STEP_PIN 27
#define E0_DIR_PIN 37
#define E0_ENABLE_PIN 45
#define SDSS 16
#define SDSS 16
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 34 // X_MAX unless overridden
#define FIL_RUNOUT_PIN 34 // X_MAX unless overridden
#endif
#ifndef FAN_PIN
#define FAN_PIN 5
#define FAN_PIN 5
#endif
#define HEATER_0_PIN 7
#define HEATER_0_PIN 7
#define ORIG_E0_AUTO_FAN_PIN 3 // Use this by NOT overriding E0_AUTO_FAN_PIN
#define CONTROLLER_FAN_PIN 2
#define ORIG_E0_AUTO_FAN_PIN 3 // Use this by NOT overriding E0_AUTO_FAN_PIN
#define CONTROLLER_FAN_PIN 2
#define TEMP_0_PIN 7 // Analog Input
#define TEMP_0_PIN 7 // Analog Input
#define HEATER_BED_PIN 8
#define TEMP_BED_PIN 6
#define HEATER_BED_PIN 8
#define TEMP_BED_PIN 6
#if HAS_GRAPHICAL_LCD
#if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920
#define LCD_PINS_RS 30
#define LCD_PINS_ENABLE 20
#define LCD_PINS_D4 25
#define BEEPER_PIN 29
#define BTN_EN1 19
#define BTN_EN2 22
#define BTN_ENC 24
#define LCD_BACKLIGHT_PIN 6
#if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920
#define LCD_PINS_RS 30
#define LCD_PINS_ENABLE 20
#define LCD_PINS_D4 25
#define BEEPER_PIN 29
#define BTN_EN1 19
#define BTN_EN2 22
#define BTN_ENC 24
#define LCD_BACKLIGHT_PIN 6
#if ENABLED(SILVER_GATE_GLCD_CONTROLLER)
#define KILL_PIN 21
#define HOME_PIN 28
#define KILL_PIN 21
#define HOME_PIN 28
#endif
#endif
#endif
#define SD_DETECT_PIN 15
#define SD_DETECT_PIN 15
#define STAT_LED_RED_PIN 23
#define STAT_LED_BLUE_PIN 26
#define CASE_LIGHT_PIN 51
#define STAT_LED_RED_PIN 23
#define STAT_LED_BLUE_PIN 26
#define CASE_LIGHT_PIN 51

Some files were not shown because too many files have changed in this diff Show more