🍻 Preliminary fix for Max31865 SPI (#22682)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
parent
57bd04b6ce
commit
f32e19e1c6
|
@ -92,6 +92,12 @@ void calibrate_delay_loop();
|
|||
|
||||
#define DELAY_CYCLES(X) do { SmartDelay<IS_CONSTEXPR(X), IS_CONSTEXPR(X) ? X : 0> _smrtdly_X(X); } while(0)
|
||||
|
||||
#if GCC_VERSION <= 70000
|
||||
#define DELAY_CYCLES_VAR(X) DelayCycleFnc(X)
|
||||
#else
|
||||
#define DELAY_CYCLES_VAR DELAY_CYCLES
|
||||
#endif
|
||||
|
||||
// For delay in microseconds, no smart delay selection is required, directly call the delay function
|
||||
// Teensy compiler is too old and does not accept smart delay compile-time / run-time selection correctly
|
||||
#define DELAY_US(x) DelayCycleFnc((x) * ((F_CPU) / 1000000UL))
|
||||
|
@ -200,9 +206,12 @@ void calibrate_delay_loop();
|
|||
#endif
|
||||
|
||||
#if ENABLED(DELAY_NS_ROUND_DOWN)
|
||||
#define DELAY_NS(x) DELAY_CYCLES((x) * ((F_CPU) / 1000000UL) / 1000UL) // floor
|
||||
#define _NS_TO_CYCLES(x) ( (x) * ((F_CPU) / 1000000UL) / 1000UL) // floor
|
||||
#elif ENABLED(DELAY_NS_ROUND_CLOSEST)
|
||||
#define DELAY_NS(x) DELAY_CYCLES(((x) * ((F_CPU) / 1000000UL) + 500) / 1000UL) // round
|
||||
#define _NS_TO_CYCLES(x) (((x) * ((F_CPU) / 1000000UL) + 500) / 1000UL) // round
|
||||
#else
|
||||
#define DELAY_NS(x) DELAY_CYCLES(((x) * ((F_CPU) / 1000000UL) + 999) / 1000UL) // "ceil"
|
||||
#define _NS_TO_CYCLES(x) (((x) * ((F_CPU) / 1000000UL) + 999) / 1000UL) // "ceil"
|
||||
#endif
|
||||
|
||||
#define DELAY_NS(x) DELAY_CYCLES(_NS_TO_CYCLES(x))
|
||||
#define DELAY_NS_VAR(x) DELAY_CYCLES_VAR(_NS_TO_CYCLES(x))
|
||||
|
|
|
@ -39,7 +39,7 @@
|
|||
#define DISABLED(V...) DO(DIS,&&,V)
|
||||
|
||||
#undef _BV
|
||||
#define _BV(b) (1UL << (b))
|
||||
#define _BV(b) (1 << (b))
|
||||
#ifndef SBI
|
||||
#define SBI(A,B) (A |= _BV(B))
|
||||
#endif
|
||||
|
|
|
@ -48,20 +48,17 @@
|
|||
|
||||
#if HAS_MAX31865 && !USE_ADAFRUIT_MAX31865
|
||||
|
||||
//#include <SoftwareSPI.h> // TODO: switch to SPIclass/SoftSPI
|
||||
#include "MAX31865.h"
|
||||
|
||||
#ifdef TARGET_LPC1768
|
||||
#include <SoftwareSPI.h>
|
||||
#endif
|
||||
|
||||
// The maximum speed the MAX31865 can do is 5 MHz
|
||||
SPISettings MAX31865::spiConfig = SPISettings(
|
||||
#if defined(TARGET_LPC1768)
|
||||
SPI_QUARTER_SPEED
|
||||
#elif defined(ARDUINO_ARCH_STM32)
|
||||
SPI_CLOCK_DIV4
|
||||
#else
|
||||
500000
|
||||
#endif
|
||||
, MSBFIRST
|
||||
, SPI_MODE_1 // CPOL0 CPHA1
|
||||
TERN(TARGET_LPC1768, SPI_QUARTER_SPEED, TERN(ARDUINO_ARCH_STM32, SPI_CLOCK_DIV4, 500000)),
|
||||
MSBFIRST,
|
||||
SPI_MODE1 // CPOL0 CPHA1
|
||||
);
|
||||
|
||||
#ifndef LARGE_PINMAP
|
||||
|
@ -93,7 +90,7 @@ SPISettings MAX31865::spiConfig = SPISettings(
|
|||
_sclk = _miso = _mosi = -1;
|
||||
}
|
||||
|
||||
#else
|
||||
#else // LARGE_PINMAP
|
||||
|
||||
/**
|
||||
* Create the interface object using software (bitbang) SPI for PIN values
|
||||
|
@ -106,9 +103,7 @@ SPISettings MAX31865::spiConfig = SPISettings(
|
|||
* @param spi_clk the SPI clock pin to use
|
||||
* @param pin_mapping set to 1 for positive pin values
|
||||
*/
|
||||
MAX31865::MAX31865(uint32_t spi_cs, uint32_t spi_mosi,
|
||||
uint32_t spi_miso, uint32_t spi_clk,
|
||||
uint8_t pin_mapping) {
|
||||
MAX31865::MAX31865(uint32_t spi_cs, uint32_t spi_mosi, uint32_t spi_miso, uint32_t spi_clk, uint8_t pin_mapping) {
|
||||
_cs = spi_cs;
|
||||
_mosi = spi_mosi;
|
||||
_miso = spi_miso;
|
||||
|
@ -130,14 +125,12 @@ SPISettings MAX31865::spiConfig = SPISettings(
|
|||
|
||||
#endif // LARGE_PINMAP
|
||||
|
||||
|
||||
/**
|
||||
*
|
||||
* Instance & Class methods
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* Initialize the SPI interface and set the number of RTD wires used
|
||||
*
|
||||
|
@ -152,22 +145,13 @@ void MAX31865::begin(max31865_numwires_t wires, float zero, float ref) {
|
|||
OUT_WRITE(_cs, HIGH);
|
||||
|
||||
if (_sclk != TERN(LARGE_PINMAP, -1UL, -1)) {
|
||||
// Define pin modes for Software SPI
|
||||
#ifdef MAX31865_DEBUG
|
||||
SERIAL_ECHOLN("Initializing MAX31865 Software SPI");
|
||||
#endif
|
||||
|
||||
OUT_WRITE(_sclk, LOW);
|
||||
SET_OUTPUT(_mosi);
|
||||
SET_INPUT(_miso);
|
||||
softSpiBegin(SPI_QUARTER_SPEED); // Define pin modes for Software SPI
|
||||
}
|
||||
else {
|
||||
// Start and configure hardware SPI
|
||||
#ifdef MAX31865_DEBUG
|
||||
SERIAL_ECHOLN("Initializing MAX31865 Hardware SPI");
|
||||
SERIAL_ECHOLNPGM("Initializing MAX31865 Hardware SPI");
|
||||
#endif
|
||||
|
||||
SPI.begin();
|
||||
SPI.begin(); // Start and configure hardware SPI
|
||||
}
|
||||
|
||||
setWires(wires);
|
||||
|
@ -176,25 +160,15 @@ void MAX31865::begin(max31865_numwires_t wires, float zero, float ref) {
|
|||
clearFault();
|
||||
|
||||
#ifdef MAX31865_DEBUG_SPI
|
||||
#ifndef LARGE_PINMAP
|
||||
SERIAL_ECHOLNPGM(
|
||||
"Regular begin call with _cs: ", _cs,
|
||||
TERN(LARGE_PINMAP, "LARGE_PINMAP", "Regular")
|
||||
" begin call with _cs: ", _cs,
|
||||
" _miso: ", _miso,
|
||||
" _sclk: ", _sclk,
|
||||
" _mosi: ", _mosi
|
||||
" _mosi: ", _mosi,
|
||||
" config: ", readRegister8(MAX31856_CONFIG_REG)
|
||||
);
|
||||
#else
|
||||
SERIAL_ECHOLNPGM(
|
||||
"LARGE_PINMAP begin call with _cs: ", _cs,
|
||||
" _miso: ", _miso,
|
||||
" _sclk: ", _sclk,
|
||||
" _mosi: ", _mosi
|
||||
);
|
||||
#endif // LARGE_PINMAP
|
||||
|
||||
SERIAL_ECHOLNPGM("config: ", readRegister8(MAX31856_CONFIG_REG));
|
||||
SERIAL_EOL();
|
||||
#endif // MAX31865_DEBUG_SPI
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
|
@ -371,7 +345,6 @@ float MAX31865::temperature(float Rrtd) {
|
|||
// private:
|
||||
//
|
||||
|
||||
|
||||
/**
|
||||
* Set a value in the configuration register.
|
||||
*
|
||||
|
@ -432,10 +405,15 @@ void MAX31865::readRegisterN(uint8_t addr, uint8_t buffer[], uint8_t n) {
|
|||
WRITE(_sclk, LOW);
|
||||
|
||||
WRITE(_cs, LOW);
|
||||
spixfer(addr);
|
||||
|
||||
#ifdef TARGET_LPC1768
|
||||
DELAY_CYCLES(_spi_speed);
|
||||
#endif
|
||||
|
||||
spiTransfer(addr);
|
||||
|
||||
while (n--) {
|
||||
buffer[0] = spixfer(0xFF);
|
||||
buffer[0] = spiTransfer(0xFF);
|
||||
#ifdef MAX31865_DEBUG_SPI
|
||||
SERIAL_ECHOLNPGM("buffer read ", n, " data: ", buffer[0]);
|
||||
#endif
|
||||
|
@ -462,8 +440,12 @@ void MAX31865::writeRegister8(uint8_t addr, uint8_t data) {
|
|||
|
||||
WRITE(_cs, LOW);
|
||||
|
||||
spixfer(addr | 0x80); // make sure top bit is set
|
||||
spixfer(data);
|
||||
#ifdef TARGET_LPC1768
|
||||
DELAY_CYCLES(_spi_speed);
|
||||
#endif
|
||||
|
||||
spiTransfer(addr | 0x80); // make sure top bit is set
|
||||
spiTransfer(data);
|
||||
|
||||
if (_sclk == TERN(LARGE_PINMAP, -1UL, -1))
|
||||
SPI.endTransaction();
|
||||
|
@ -480,21 +462,38 @@ void MAX31865::writeRegister8(uint8_t addr, uint8_t data) {
|
|||
* @param x an 8-bit chunk of data to write
|
||||
* @return the 8-bit response
|
||||
*/
|
||||
uint8_t MAX31865::spixfer(uint8_t x) {
|
||||
uint8_t MAX31865::spiTransfer(uint8_t x) {
|
||||
if (_sclk == TERN(LARGE_PINMAP, -1UL, -1))
|
||||
return SPI.transfer(x);
|
||||
|
||||
#ifdef TARGET_LPC1768
|
||||
return swSpiTransfer(x, _spi_speed, _sclk, _miso, _mosi);
|
||||
#else
|
||||
uint8_t reply = 0;
|
||||
for (int i = 7; i >= 0; i--) {
|
||||
WRITE(_sclk, HIGH); DELAY_NS_VAR(_spi_delay);
|
||||
reply <<= 1;
|
||||
WRITE(_sclk, HIGH);
|
||||
WRITE(_mosi, x & (1 << i));
|
||||
WRITE(_sclk, LOW);
|
||||
if (READ(_miso))
|
||||
reply |= 1;
|
||||
WRITE(_mosi, x & _BV(i)); DELAY_NS_VAR(_spi_delay);
|
||||
if (READ(_miso)) reply |= 1;
|
||||
WRITE(_sclk, LOW); DELAY_NS_VAR(_spi_delay);
|
||||
}
|
||||
return reply;
|
||||
#endif
|
||||
}
|
||||
|
||||
return reply;
|
||||
void MAX31865::softSpiBegin(const uint8_t spi_speed) {
|
||||
#ifdef MAX31865_DEBUG
|
||||
SERIAL_ECHOLNPGM("Initializing MAX31865 Software SPI");
|
||||
#endif
|
||||
#ifdef TARGET_LPC1768
|
||||
swSpiBegin(_sclk, _miso, _mosi);
|
||||
_spi_speed = swSpiInit(spi_speed, _sclk, _mosi);
|
||||
#else
|
||||
_spi_delay = (100UL << spi_speed) / 3; // Calculate delay in ns. Top speed is ~10MHz, or 100ns delay between bits.
|
||||
OUT_WRITE(_sclk, LOW);
|
||||
SET_OUTPUT(_mosi);
|
||||
SET_INPUT(_miso);
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif // HAS_MAX31865 && !USE_ADAFRUIT_MAX31865
|
||||
|
|
|
@ -90,6 +90,13 @@ private:
|
|||
static SPISettings spiConfig;
|
||||
|
||||
TERN(LARGE_PINMAP, uint32_t, uint8_t) _sclk, _miso, _mosi, _cs;
|
||||
|
||||
#ifdef TARGET_LPC1768
|
||||
uint8_t _spi_speed;
|
||||
#else
|
||||
uint16_t _spi_delay;
|
||||
#endif
|
||||
|
||||
float Rzero, Rref;
|
||||
|
||||
void setConfig(uint8_t config, bool enable);
|
||||
|
@ -99,7 +106,9 @@ private:
|
|||
uint16_t readRegister16(uint8_t addr);
|
||||
|
||||
void writeRegister8(uint8_t addr, uint8_t reg);
|
||||
uint8_t spixfer(uint8_t addr);
|
||||
uint8_t spiTransfer(uint8_t addr);
|
||||
|
||||
void softSpiBegin(const uint8_t spi_speed);
|
||||
|
||||
public:
|
||||
#ifdef LARGE_PINMAP
|
||||
|
|
|
@ -14,11 +14,12 @@ exec_test $1 $2 "Azteeg X5GT Example Configuration" "$3"
|
|||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD \
|
||||
EXTRUDERS 2 TEMP_SENSOR_1 -1 TEMP_SENSOR_BED 5 \
|
||||
EXTRUDERS 2 TEMP_SENSOR_0 -5 TEMP_SENSOR_1 -1 TEMP_SENSOR_BED 5 TEMP_0_CS_PIN P1_29 \
|
||||
GRID_MAX_POINTS_X 16 \
|
||||
NOZZLE_CLEAN_START_POINT "{ { 10, 10, 3 }, { 10, 10, 3 } }" \
|
||||
NOZZLE_CLEAN_END_POINT "{ { 10, 20, 3 }, { 10, 20, 3 } }"
|
||||
opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
|
||||
MAX31865_SENSOR_OHMS_0 MAX31865_CALIBRATION_OHMS_0 \
|
||||
FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET LEVEL_CORNERS_USE_PROBE LEVEL_CORNERS_VERIFY_RAISED \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
|
||||
|
|
|
@ -15,12 +15,13 @@ exec_test $1 $2 "Teensy4.1 with default config" "$3"
|
|||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_TEENSY41 \
|
||||
EXTRUDERS 2 TEMP_SENSOR_0 1 TEMP_SENSOR_1 5 TEMP_SENSOR_BED 1 \
|
||||
EXTRUDERS 2 TEMP_SENSOR_0 -5 TEMP_SENSOR_1 5 TEMP_SENSOR_BED 1 TEMP_0_CS_PIN 23 \
|
||||
I2C_SLAVE_ADDRESS 63 \
|
||||
GRID_MAX_POINTS_X 16 \
|
||||
NOZZLE_CLEAN_START_POINT "{ { 10, 10, 3 }, { 10, 10, 3 } }" \
|
||||
NOZZLE_CLEAN_END_POINT "{ { 10, 20, 3 }, { 10, 20, 3 } }"
|
||||
opt_enable EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
|
||||
opt_enable MAX31865_SENSOR_OHMS_0 MAX31865_CALIBRATION_OHMS_0 \
|
||||
EXTENSIBLE_UI LCD_INFO_MENU SDSUPPORT SDCARD_SORT_ALPHA \
|
||||
FILAMENT_LCD_DISPLAY CALIBRATION_GCODE BAUD_RATE_GCODE \
|
||||
FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET \
|
||||
|
|
Loading…
Reference in a new issue