From f3b593ae73b5d21b5c270a5f5ede0fe982822b07 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 31 May 2022 12:43:44 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=8E=A8=20Fix=20spelling,=20whitespace?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/Configuration.h | 2 +- Marlin/Makefile | 2 +- Marlin/src/core/boards.h | 2 +- Marlin/src/feature/meatpack.cpp | 2 +- Marlin/src/feature/meatpack.h | 4 ++-- Marlin/src/feature/mmu/mmu2-serial-protocol.md | 2 +- Marlin/src/feature/mmu/mmu2.cpp | 2 +- Marlin/src/gcode/gcode.cpp | 2 +- Marlin/src/gcode/gcode.h | 2 +- Marlin/src/gcode/parser.h | 2 +- Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp | 2 +- Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp | 2 +- Marlin/src/lcd/extui/malyan/malyan.cpp | 2 +- Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp | 6 +++--- Marlin/src/lcd/extui/mks_ui/draw_ui.cpp | 6 +++--- Marlin/src/lcd/extui/mks_ui/pic_manager.h | 2 +- Marlin/src/module/planner.h | 4 ++-- buildroot/share/scripts/g29_auto.py | 10 +++++----- 18 files changed, 28 insertions(+), 28 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 4720e4e878..a61ca947aa 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -623,7 +623,7 @@ #if ENABLED(PIDTEMP) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] + // Set/get with G-code: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify up to one value per hotend here, according to your setup. diff --git a/Marlin/Makefile b/Marlin/Makefile index f1c89ff7f5..417c979f88 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -512,7 +512,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1324) else ifeq ($(HARDWARE_MOTHERBOARD),1325) # Intamsys 4.0 (Funmat HT) else ifeq ($(HARDWARE_MOTHERBOARD),1326) -# Malyan M180 Mainboard Version 2 (no display function, direct gcode only) +# Malyan M180 Mainboard Version 2 (no display function, direct G-code only) else ifeq ($(HARDWARE_MOTHERBOARD),1327) # Geeetech GT2560 Rev B for A20(M/T/D) else ifeq ($(HARDWARE_MOTHERBOARD),1328) diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 5b0210d9e4..ef750056d6 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -161,7 +161,7 @@ #define BOARD_PICA_REVB 1324 // PICA Shield (original version) #define BOARD_PICA 1325 // PICA Shield (rev C or later) #define BOARD_INTAMSYS40 1326 // Intamsys 4.0 (Funmat HT) -#define BOARD_MALYAN_M180 1327 // Malyan M180 Mainboard Version 2 (no display function, direct gcode only) +#define BOARD_MALYAN_M180 1327 // Malyan M180 Mainboard Version 2 (no display function, direct G-code only) #define BOARD_GT2560_V4_A20 1328 // Geeetech GT2560 Rev B for A20(M/T/D) #define BOARD_PROTONEER_CNC_SHIELD_V3 1329 // Mega controller & Protoneer CNC Shield V3.00 #define BOARD_WEEDO_62A 1330 // WEEDO 62A board (TINA2, Monoprice Cadet, etc.) diff --git a/Marlin/src/feature/meatpack.cpp b/Marlin/src/feature/meatpack.cpp index b2899243b2..07ff41e5be 100644 --- a/Marlin/src/feature/meatpack.cpp +++ b/Marlin/src/feature/meatpack.cpp @@ -26,7 +26,7 @@ * Algorithm & Implementation: Scott Mudge - mail@scottmudge.com * Date: Dec. 2020 * - * Character Frequencies from ~30 MB of comment-stripped gcode: + * Character Frequencies from ~30 MB of comment-stripped G-code: * '1' -> 4451136 '4' -> 1353273 '\n' -> 1087683 '-' -> 90242 * '0' -> 4253577 '9' -> 1352147 'G' -> 1075806 'Z' -> 34109 * ' ' -> 3053297 '3' -> 1262929 'X' -> 975742 'M' -> 11879 diff --git a/Marlin/src/feature/meatpack.h b/Marlin/src/feature/meatpack.h index a56e65b6cc..98a535e592 100644 --- a/Marlin/src/feature/meatpack.h +++ b/Marlin/src/feature/meatpack.h @@ -29,7 +29,7 @@ * Specifically optimized for 3D printing G-Code, this is a zero-cost data compression method * which packs ~180-190% more data into the same amount of bytes going to the CNC controller. * As a majority of G-Code can be represented by a restricted alphabet, I performed histogram - * analysis on a wide variety of 3D printing gcode samples, and found ~93% of all gcode could + * analysis on a wide variety of 3D printing G-code samples, and found ~93% of all G-code could * be represented by the same 15-character alphabet. * * This allowed me to design a system of packing 2 8-bit characters into a single byte, assuming @@ -38,7 +38,7 @@ * * Combined with some logic to allow commingling of full-width characters outside of this 15- * character alphabet (at the cost of an extra 8-bits per full-width character), and by stripping - * out unnecessary comments, the end result is gcode which is roughly half the original size. + * out unnecessary comments, the end result is G-code which is roughly half the original size. * * Why did I do this? I noticed micro-stuttering and other data-bottleneck issues while printing * objects with high curvature, especially at high speeds. There is also the issue of the limited diff --git a/Marlin/src/feature/mmu/mmu2-serial-protocol.md b/Marlin/src/feature/mmu/mmu2-serial-protocol.md index 7ff0901742..93135e406f 100644 --- a/Marlin/src/feature/mmu/mmu2-serial-protocol.md +++ b/Marlin/src/feature/mmu/mmu2-serial-protocol.md @@ -51,7 +51,7 @@ When done, the MMU sends - MMU => 'ok\n' -We don't wait for a response here but immediately continue with the next gcode which should +We don't wait for a response here but immediately continue with the next G-code which should be one or more extruder moves to feed the filament into the hotend. diff --git a/Marlin/src/feature/mmu/mmu2.cpp b/Marlin/src/feature/mmu/mmu2.cpp index 2544995c6d..a4718b53d9 100644 --- a/Marlin/src/feature/mmu/mmu2.cpp +++ b/Marlin/src/feature/mmu/mmu2.cpp @@ -939,7 +939,7 @@ bool MMU2::load_filament_to_nozzle(const uint8_t index) { * Load filament to nozzle of multimaterial printer * * This function is used only after T? (user select filament) and M600 (change filament). - * It is not used after T0 .. T4 command (select filament), in such case, gcode is responsible for loading + * It is not used after T0 .. T4 command (select filament), in such case, G-code is responsible for loading * filament to nozzle. */ void MMU2::load_to_nozzle() { diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp index 70e2f36f2f..f6e6dda5f8 100644 --- a/Marlin/src/gcode/gcode.cpp +++ b/Marlin/src/gcode/gcode.cpp @@ -21,7 +21,7 @@ */ /** - * gcode.cpp - Temporary container for all gcode handlers + * gcode.cpp - Temporary container for all G-code handlers * Most will migrate to classes, by feature. */ diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index 772accba5d..509c6e219d 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -110,7 +110,7 @@ * M33 - Get the longname version of a path. (Requires LONG_FILENAME_HOST_SUPPORT) * M34 - Set SD Card sorting options. (Requires SDCARD_SORT_ALPHA) * - * M42 - Change pin status via gcode: M42 P S. LED pin assumed if P is omitted. (Requires DIRECT_PIN_CONTROL) + * M42 - Change pin status via G-code: M42 P S. LED pin assumed if P is omitted. (Requires DIRECT_PIN_CONTROL) * M43 - Display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins (Requires PINS_DEBUGGING) * M48 - Measure Z Probe repeatability: M48 P X Y V E L S. (Requires Z_MIN_PROBE_REPEATABILITY_TEST) * diff --git a/Marlin/src/gcode/parser.h b/Marlin/src/gcode/parser.h index 1487c083ec..a32999f2d2 100644 --- a/Marlin/src/gcode/parser.h +++ b/Marlin/src/gcode/parser.h @@ -45,7 +45,7 @@ /** * GCode parser * - * - Parse a single gcode line for its letter, code, subcode, and parameters + * - Parse a single G-code line for its letter, code, subcode, and parameters * - FASTER_GCODE_PARSER: * - Flags existing params (1 bit each) * - Stores value offsets (1 byte each) diff --git a/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp b/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp index 7561c89d79..285729cc15 100644 --- a/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp +++ b/Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp @@ -708,7 +708,7 @@ void ChironTFT::PanelAction(uint8_t req) { // Old TFT A22 X -1F1500 A22 X +1F1500 // New TFT A22 X-1.0 F1500 A22 X1.0 F1500 - // lets just wrap this in a gcode relative nonprint move and let the controller deal with it + // Send a G-code-relative non-print move and let the controller deal with it // G91 G0 G90 if (!isPrinting()) { // Ignore request if printing diff --git a/Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp b/Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp index 6fa188bf5f..0eb95bb041 100644 --- a/Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp +++ b/Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp @@ -243,7 +243,7 @@ void DGUSDisplay::WritePGM(const char str[], uint8_t len) { } void DGUSDisplay::loop() { - // protect against recursion… ProcessRx() may indirectly call idle() when injecting gcode commands. + // Protect against recursion. ProcessRx() may indirectly call idle() when injecting G-code commands. if (!no_reentrance) { no_reentrance = true; ProcessRx(); diff --git a/Marlin/src/lcd/extui/malyan/malyan.cpp b/Marlin/src/lcd/extui/malyan/malyan.cpp index df7f305df2..06c9886f01 100644 --- a/Marlin/src/lcd/extui/malyan/malyan.cpp +++ b/Marlin/src/lcd/extui/malyan/malyan.cpp @@ -24,7 +24,7 @@ * lcd/extui/malyan/malyan.cpp * * LCD implementation for Malyan's LCD, a separate ESP8266 MCU running - * on Serial1 for the M200 board. This module outputs a pseudo-gcode + * on Serial1 for the M200 board. This module outputs a pseudo-G-code * wrapped in curly braces which the LCD implementation translates into * actual G-code commands. * diff --git a/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp b/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp index 5d6a991910..0199bc1f55 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp @@ -369,7 +369,7 @@ uint32_t lv_open_gcode_file(char *path) { card.openFileRead(cur_name); card.read(public_buf, 512); ps4 = (uint32_t *)strstr((char *)public_buf, ";simage:"); - // Ignore the beginning message of gcode file + // Ignore the beginning message of G-code file if (ps4) { pre_sread_cnt = (uintptr_t)ps4 - (uintptr_t)((uint32_t *)(&public_buf[0])); card.setIndex(pre_sread_cnt); @@ -490,7 +490,7 @@ void cutFileName(char *path, int len, int bytePerLine, char *outStr) { //&& (strIndex2 != 0) && (strIndex1 < strIndex2) ) ? strIndex1 + 1 : tmpFile; - if (strIndex2 == 0 || (strIndex1 > strIndex2)) { // not gcode file + if (strIndex2 == 0 || (strIndex1 > strIndex2)) { // not G-code file #if _LFN_UNICODE if (wcslen(beginIndex) > len) wcsncpy(outStr, beginIndex, len); @@ -503,7 +503,7 @@ void cutFileName(char *path, int len, int bytePerLine, char *outStr) { strcpy(outStr, beginIndex); #endif } - else { // gcode file + else { // G-code file if (strIndex2 - beginIndex > (len - 2)) { #if _LFN_UNICODE wcsncpy(outStr, (const WCHAR *)beginIndex, len - 3); diff --git a/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp b/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp index d3f192e44f..6a8333fd66 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp @@ -159,7 +159,7 @@ void gCfgItems_init() { gCfgItems.spi_flash_flag = FLASH_INF_VALID_FLAG; W25QXX.SPI_FLASH_SectorErase(VAR_INF_ADDR); W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&gCfgItems, VAR_INF_ADDR, sizeof(gCfgItems)); - // init gcode command + // Init G-code command W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&custom_gcode_command[0], AUTO_LEVELING_COMMAND_ADDR, 100); W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&custom_gcode_command[1], OTHERS_COMMAND_ADDR_1, 100); W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&custom_gcode_command[2], OTHERS_COMMAND_ADDR_2, 100); @@ -238,7 +238,7 @@ void update_spi_flash() { uint8_t command_buf[512]; W25QXX.init(SPI_QUARTER_SPEED); - // read back the gcode command before erase spi flash + // read back the G-code command before erase spi flash W25QXX.SPI_FLASH_BufferRead((uint8_t *)&command_buf, GCODE_COMMAND_ADDR, sizeof(command_buf)); W25QXX.SPI_FLASH_SectorErase(VAR_INF_ADDR); W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&gCfgItems, VAR_INF_ADDR, sizeof(gCfgItems)); @@ -249,7 +249,7 @@ void update_gcode_command(int addr, uint8_t *s) { uint8_t command_buf[512]; W25QXX.init(SPI_QUARTER_SPEED); - // read back the gcode command before erase spi flash + // read back the G-code command before erase spi flash W25QXX.SPI_FLASH_BufferRead((uint8_t *)&command_buf, GCODE_COMMAND_ADDR, sizeof(command_buf)); W25QXX.SPI_FLASH_SectorErase(VAR_INF_ADDR); W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&gCfgItems, VAR_INF_ADDR, sizeof(gCfgItems)); diff --git a/Marlin/src/lcd/extui/mks_ui/pic_manager.h b/Marlin/src/lcd/extui/mks_ui/pic_manager.h index 320cb20b0b..cdcc5b76b8 100644 --- a/Marlin/src/lcd/extui/mks_ui/pic_manager.h +++ b/Marlin/src/lcd/extui/mks_ui/pic_manager.h @@ -122,7 +122,7 @@ #define VAR_INF_ADDR 0x000000 #define FLASH_INF_VALID_FLAG 0x20201118 -// Store some gcode commands, such as auto leveling commands +// Store some G-code commands, such as auto-leveling commands #define GCODE_COMMAND_ADDR VAR_INF_ADDR + 3 * 1024 #define AUTO_LEVELING_COMMAND_ADDR GCODE_COMMAND_ADDR #define OTHERS_COMMAND_ADDR_1 AUTO_LEVELING_COMMAND_ADDR + 100 diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index c450418a5c..1af5ccc810 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -162,7 +162,7 @@ enum BlockFlag : char { * A single entry in the planner buffer. * Tracks linear movement over multiple axes. * - * The "nominal" values are as-specified by gcode, and + * The "nominal" values are as-specified by G-code, and * may never actually be reached due to acceleration limits. */ typedef struct block_t { @@ -411,7 +411,7 @@ class Planner { /** * The current position of the tool in absolute steps - * Recalculated if any axis_steps_per_mm are changed by gcode + * Recalculated if any axis_steps_per_mm are changed by G-code */ static xyze_long_t position; diff --git a/buildroot/share/scripts/g29_auto.py b/buildroot/share/scripts/g29_auto.py index ca36346dd9..5cf27b9968 100755 --- a/buildroot/share/scripts/g29_auto.py +++ b/buildroot/share/scripts/g29_auto.py @@ -1,13 +1,13 @@ #!/usr/bin/env python -# This file is for preprocessing gcode and the new G29 Autobedleveling from Marlin -# It will analyse the first 2 Layer and return the maximum size for this part -# After this it will replace with g29_keyword = ';MarlinG29Script' with the new G29 LRFB -# the new file will be created in the same folder. +# This file is for preprocessing G-code and the new G29 Auto bed leveling from Marlin +# It will analyze the first 2 layers and return the maximum size for this part +# Then it will be replaced with g29_keyword = ';MarlinG29Script' with the new G29 LRFB. +# The new file will be created in the same folder. from __future__ import print_function -# your gcode-file/folder +# Your G-code file/folder folder = './' my_file = 'test.gcode'