zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Follow-up the PR #4955, etc

Browse source 
・More ANALOG NUMBERING to Analog Input
・Add comment header to all the section of all the pins files

・Sort sections as follows:
1. Some special definitions (USBCON, LARGE_FLASH, etc)
2. Servos
3. Limit Switches
4. Z Probe
5. Steppers
6. Temperature Sensors
7. Heaters / Fans
8. Misc. Functions
9. LCD / Controller

・Move MAX6675_SS into "Temperature Sensors" section
・Adjust spacing
This commit is contained in:
esenapaj 2016-10-09 05:27:04 +09:00
parent 00456b0cb3
commit f41c60d4a4
49 changed files with 739 additions and 484 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

15
Marlin/pins_3DRAG.h
View file

@ -36,6 +36,9 @@
#define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/" #define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
#endif #endif
//
// Heaters / Fans
//
#define RAMPS_D8_PIN 9 #define RAMPS_D8_PIN 9
#define RAMPS_D9_PIN 8 #define RAMPS_D9_PIN 8
#define MOSFET_D_PIN 12 #define MOSFET_D_PIN 12
@ -55,7 +58,12 @@
#define Z_ENABLE_PIN 63 #define Z_ENABLE_PIN 63
// //
// SD Card // Heaters / Fans
//
#define HEATER_2_PIN 6
//
// Misc. Functions
// //
#undef SDSS #undef SDSS
#define SDSS 25 #define SDSS 25
@ -63,11 +71,6 @@
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SD_DETECT_PIN 53 #define SD_DETECT_PIN 53
//
// Heaters / Fans
//
#define HEATER_2_PIN 6
// //
// LCD / Controller // LCD / Controller
// //

2
Marlin/pins_5DPRINT.h
View file

@ -89,6 +89,6 @@
#define FAN_PIN 16 #define FAN_PIN 16
// //
// SD Card // Misc. Functions
// //
#define SDSS 20 #define SDSS 20

3
Marlin/pins_99.h
View file

@ -64,5 +64,8 @@
#define HEATER_0_PIN 13 #define HEATER_0_PIN 13
#define HEATER_BED_PIN 4 #define HEATER_BED_PIN 4
//
// Misc. Functions
//
#define SDSS 53 #define SDSS 53
#define PS_ON_PIN 9 #define PS_ON_PIN 9

73
Marlin/pins_A4JP.h
View file

@ -30,6 +30,12 @@
#define BOARD_NAME "AJ4P" #define BOARD_NAME "AJ4P"
#define LARGE_FLASH true
/************************************************
* Rambo pin assignments old
************************************************/
// //
// Servos // Servos
// //
@ -38,16 +44,6 @@
#define SERVO2_PIN 24 // Motor header MX3 #define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5 #define SERVO3_PIN 5 // PWM header pin 5
#define SLED_PIN -1
#define FILWIDTH_PIN 3 // Analog Input
/************************************************
* Rambo pin assignments old
************************************************/
#define LARGE_FLASH true
// //
// Limit Switches // Limit Switches
// //
@ -65,42 +61,52 @@
#define Z_MIN_PROBE_PIN 30 #define Z_MIN_PROBE_PIN 30
#endif #endif
#define SLED_PIN -1
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 37 #define X_STEP_PIN 37
#define X_DIR_PIN 48 #define X_DIR_PIN 48
#define X_ENABLE_PIN 29 #define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36 #define Y_STEP_PIN 36
#define Y_DIR_PIN 49 #define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28 #define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35 #define Z_STEP_PIN 35
#define Z_DIR_PIN 47 #define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27 #define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_STEP_PIN 34 #define E0_STEP_PIN 34
#define E0_DIR_PIN 43 #define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26 #define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN 33 #define E1_STEP_PIN 33
#define E1_DIR_PIN 42 #define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25 #define E1_ENABLE_PIN 25
// Microstepping pins - Mapping not from fastio.h (?)
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_MS1_PIN 63 #define E1_MS1_PIN 63
#define E1_MS2_PIN 64 #define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38 #define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_BED_PIN 7 // Analog Input
// //
// Heaters / Fans // Heaters / Fans
// //
@ -112,31 +118,32 @@
#define FAN0_PIN 6 #define FAN0_PIN 6
#define FAN1_PIN 2 #define FAN1_PIN 2
#define TEMP_0_PIN 0 // Analog Input //
#define TEMP_BED_PIN 7 // Analog Input // Misc. Functions
//
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define PS_ON_PIN 4 #define PS_ON_PIN 4
#define FILWIDTH_PIN 3 // Analog Input
// //
// LCD / Controller // LCD / Controller
// //
#define LCD_PINS_RS 70 //ext2_5 #define LCD_PINS_RS 70 // Ext2_5
#define LCD_PINS_ENABLE 71 //ext2_7 #define LCD_PINS_ENABLE 71 // Ext2_7
#define LCD_PINS_D4 72 ///////Ext2 9 ? #define LCD_PINS_D4 72 // Ext2_9 ?
#define LCD_PINS_D5 73 ///////Ext2 11 ? #define LCD_PINS_D5 73 // Ext2_11 ?
#define LCD_PINS_D6 74 //ext2_13 #define LCD_PINS_D6 74 // Ext2_13
#define LCD_PINS_D7 75 ///////Ext2 15 ? #define LCD_PINS_D7 75 // Ext2_15 ?
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#define BTN_HOME 80 //ext_16 #define BTN_HOME 80 // Ext_16
#define BTN_CENTER 81 //ext_14 #define BTN_CENTER 81 // Ext_14
#define BTN_ENC BTN_CENTER #define BTN_ENC BTN_CENTER
#define BTN_RIGHT 82 //ext_12 #define BTN_RIGHT 82 // Ext_12
#define BTN_LEFT 83 //ext_10 #define BTN_LEFT 83 // Ext_10
#define BTN_UP 84 //ext2_8 #define BTN_UP 84 // Ext2_8
#define BTN_DOWN 85 //ext2_6 #define BTN_DOWN 85 // Ext2_6
#define HOME_PIN BTN_HOME #define HOME_PIN BTN_HOME

3
Marlin/pins_AZTEEG_X3.h
View file

@ -32,6 +32,9 @@
#include "pins_RAMPS_13.h" #include "pins_RAMPS_13.h"
//
// LCD / Controller
//
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#undef DOGLCD_A0 #undef DOGLCD_A0

18
Marlin/pins_AZTEEG_X3_PRO.h
View file

@ -28,6 +28,8 @@
#include "pins_RAMPS.h" #include "pins_RAMPS.h"
//
// Servos
// //
// Tested this pin with bed leveling on a Delta with 1 servo. // Tested this pin with bed leveling on a Delta with 1 servo.
// Physical wire attachment on EXT1: GND, 5V, D47. // Physical wire attachment on EXT1: GND, 5V, D47.
@ -35,6 +37,8 @@
#undef SERVO0_PIN #undef SERVO0_PIN
#define SERVO0_PIN 47 #define SERVO0_PIN 47
//
// Limit Switches
// //
// Swap the MIN and MAX endstop pins because the X3 Pro comes with only // Swap the MIN and MAX endstop pins because the X3 Pro comes with only
// MIN endstop pin headers soldered onto the board. // MIN endstop pin headers soldered onto the board.
@ -80,11 +84,11 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_2_PIN 12 // ANALOG NUMBERING #define TEMP_2_PIN 12 // Analog Input
#define TEMP_3_PIN 11 // ANALOG NUMBERING #define TEMP_3_PIN 11 // Analog Input
#define TEMP_4_PIN 10 // ANALOG NUMBERING #define TEMP_4_PIN 10 // Analog Input
#define TC1 4 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro #define TC1 4 // Analog Input (Thermo couple on Azteeg X3Pro)
#define TC2 5 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro #define TC2 5 // Analog Input (Thermo couple on Azteeg X3Pro)
// //
// Heaters / Fans // Heaters / Fans
@ -97,9 +101,9 @@
#define HEATER_7_PIN 11 #define HEATER_7_PIN 11
#undef FAN_PIN #undef FAN_PIN
#define FAN_PIN 6 //Part Cooling System #define FAN_PIN 6 // Part Cooling System
#define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable) #define CONTROLLERFAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable)
// Fans/Water Pump to cool the hotend cool side. // Fans/Water Pump to cool the hotend cool side.
#define EXTRUDER_0_AUTO_FAN_PIN 5 #define EXTRUDER_0_AUTO_FAN_PIN 5

3
Marlin/pins_BAM_DICE_DUE.h
View file

@ -32,6 +32,9 @@
#include "pins_RAMPS.h" #include "pins_RAMPS.h"
//
// Temperature Sensors
//
#undef TEMP_0_PIN #undef TEMP_0_PIN
#undef TEMP_1_PIN #undef TEMP_1_PIN
#define TEMP_0_PIN 9 // Analog Input #define TEMP_0_PIN 9 // Analog Input

32
Marlin/pins_BQ_ZUM_MEGA_3D.h
View file

@ -30,6 +30,9 @@
#define BOARD_NAME "ZUM Mega 3D" #define BOARD_NAME "ZUM Mega 3D"
//
// Heaters / Fans
//
#define RAMPS_D8_PIN 10 #define RAMPS_D8_PIN 10
#define RAMPS_D9_PIN 12 #define RAMPS_D9_PIN 12
#define RAMPS_D10_PIN 9 #define RAMPS_D10_PIN 9
@ -37,23 +40,38 @@
#include "pins_RAMPS_13.h" #include "pins_RAMPS_13.h"
//
// Limit Switches
//
#undef X_MAX_PIN #undef X_MAX_PIN
#define X_MAX_PIN 79 // 2 #define X_MAX_PIN 79 // 2
//
// Z Probe (when not Z_MIN_PIN)
//
#undef Z_MIN_PROBE_PIN #undef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19 // IND_S_5V #define Z_MIN_PROBE_PIN 19 // IND_S_5V
#undef Z_ENABLE_PIN #undef Z_ENABLE_PIN
#define Z_ENABLE_PIN 77 // 62 #define Z_ENABLE_PIN 77 // 62
#undef TEMP_1_PIN //
#define TEMP_1_PIN 14 // 15 // Steppers
//
#undef TEMP_BED_PIN
#define TEMP_BED_PIN 15 // 14
#define DIGIPOTSS_PIN 22 #define DIGIPOTSS_PIN 22
#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 } #define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 }
//
// Temperature Sensors
//
#undef TEMP_1_PIN
#define TEMP_1_PIN 14 // Analog Input (15)
#undef TEMP_BED_PIN
#define TEMP_BED_PIN 15 // Analog Input (14)
//
// Misc. Functions
//
#undef PS_ON_PIN // 12 #undef PS_ON_PIN // 12
#define PS_ON_PIN 81 // External Power Supply #define PS_ON_PIN 81 // External Power Supply

4
Marlin/pins_BRAINWAVE.h
View file

@ -76,6 +76,10 @@
// //
#define HEATER_0_PIN 4 // Extruder #define HEATER_0_PIN 4 // Extruder
#define HEATER_BED_PIN 38 // Bed #define HEATER_BED_PIN 38 // Bed
#define FAN_PIN 3 // Fan #define FAN_PIN 3 // Fan
//
// Misc. Functions
//
#define LED_PIN 39 #define LED_PIN 39

3
Marlin/pins_BRAINWAVE_PRO.h
View file

@ -90,9 +90,8 @@
#define FAN_PIN 16 // Fan, PWM #define FAN_PIN 16 // Fan, PWM
// //
// LCD / Controller // Misc. Functions
// //
#define SDSS 20 #define SDSS 20
#define SD_DETECT_PIN 12 #define SD_DETECT_PIN 12
#define LED_PIN 19 #define LED_PIN 19

3
Marlin/pins_CHEAPTRONIC.h
View file

@ -75,6 +75,9 @@
#define HEATER_1_PIN 23 // EXTRUDER 2 #define HEATER_1_PIN 23 // EXTRUDER 2
#define HEATER_BED_PIN 22 #define HEATER_BED_PIN 22
//
// LCD / Controller
//
// Cheaptronic v1.0 doesn't support LCD // Cheaptronic v1.0 doesn't support LCD
#define LCD_PINS_RS -1 #define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1 #define LCD_PINS_ENABLE -1

20
Marlin/pins_CNCONTROLS_11.h
View file

@ -56,6 +56,7 @@
#define TEMP_2_PIN 2 // Analog Input. 9 for tool3 -> 2 for chambertemp #define TEMP_2_PIN 2 // Analog Input. 9 for tool3 -> 2 for chambertemp
#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 2 for chambertemp #define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 2 for chambertemp
#define TEMP_BED_PIN 1 // Analog Input #define TEMP_BED_PIN 1 // Analog Input
//#define TEMP_CHAMBER_PIN 2 // Analog Input
// //
// Heaters / Fans // Heaters / Fans
@ -66,6 +67,14 @@
#define HEATER_3_PIN 46 #define HEATER_3_PIN 46
#define HEATER_BED_PIN 2 #define HEATER_BED_PIN 2
//#define FAN_PIN 7 // common PWM pin for all tools
//
// Misc. Functions
//
#define SDSS 53
#define SD_DETECT_PIN 13
// Tools // Tools
//#define TOOL_0_PIN 4 //#define TOOL_0_PIN 4
@ -76,18 +85,10 @@
// Common I/O // Common I/O
//#define TEMP_CHAMBER_PIN 2 // ANALOG INPUT !!
//#define FIL_RUNOUT_PIN -1 //#define FIL_RUNOUT_PIN -1
//#define PWM_1_PIN 11 //#define PWM_1_PIN 11
//#define PWM_2_PIN 10 //#define PWM_2_PIN 10
//#define SPARE_IO 12 //#define SPARE_IO 12
//#define FAN_PIN 7 // common PWM pin for all tools
//
// SD Card
//
#define SDSS 53
#define SD_DETECT_PIN 13
// //
// LCD / Controller // LCD / Controller
@ -112,8 +113,5 @@
//#define UI1 31 //#define UI1 31
//#define UI2 22 //#define UI2 22
//
// Misc. Functions
//
#define STAT_LED_BLUE_PIN -1 #define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 31 #define STAT_LED_RED_PIN 31

22
Marlin/pins_CNCONTROLS_12.h
View file

@ -69,9 +69,11 @@
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools #define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
//#define PWM_1_PIN 12 //
//#define PWM_2_PIN 13 // Misc. Functions
//#define SPARE_IO 17 //
#define SDSS 53
#define SD_DETECT_PIN 15
// Tools // Tools
@ -86,6 +88,11 @@
// Common I/O // Common I/O
#define FIL_RUNOUT_PIN 18
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
// //
// LCD / Controller // LCD / Controller
// //
@ -113,12 +120,3 @@
#define STAT_LED_BLUE_PIN -1 #define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN #define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN
//
// SD Card
//
#define SDSS 53
#define SD_DETECT_PIN 15
// Other
#define FIL_RUNOUT_PIN 18

34
Marlin/pins_ELEFU_3.h
View file

@ -116,34 +116,34 @@
#endif // RA_CONTROL_PANEL #endif // RA_CONTROL_PANEL
#if ENABLED(RA_DISCO) #if ENABLED(RA_DISCO)
//variables for which pins the TLC5947 is using // variables for which pins the TLC5947 is using
#define TLC_CLOCK_PIN 25 #define TLC_CLOCK_PIN 25
#define TLC_BLANK_PIN 23 #define TLC_BLANK_PIN 23
#define TLC_XLAT_PIN 22 #define TLC_XLAT_PIN 22
#define TLC_DATA_PIN 24 #define TLC_DATA_PIN 24
//We also need to define pin to port number mapping for the 2560 to match the pins listed above. If you change the TLC pins, update this as well per the 2560 datasheet! // We also need to define pin to port number mapping for the 2560 to match the pins listed above. If you change the TLC pins, update this as well per the 2560 datasheet!
//This currently only works with the RA Board. // This currently only works with the RA Board.
#define TLC_CLOCK_BIT 3 //bit 3 on port A #define TLC_CLOCK_BIT 3 // bit 3 on port A
#define TLC_CLOCK_PORT &PORTA //bit 3 on port A #define TLC_CLOCK_PORT &PORTA // bit 3 on port A
#define TLC_BLANK_BIT 1 //bit 1 on port A #define TLC_BLANK_BIT 1 // bit 1 on port A
#define TLC_BLANK_PORT &PORTA //bit 1 on port A #define TLC_BLANK_PORT &PORTA // bit 1 on port A
#define TLC_DATA_BIT 2 //bit 2 on port A #define TLC_DATA_BIT 2 // bit 2 on port A
#define TLC_DATA_PORT &PORTA //bit 2 on port A #define TLC_DATA_PORT &PORTA // bit 2 on port A
#define TLC_XLAT_BIT 0 //bit 0 on port A #define TLC_XLAT_BIT 0 // bit 0 on port A
#define TLC_XLAT_PORT &PORTA //bit 0 on port A #define TLC_XLAT_PORT &PORTA // bit 0 on port A
//change this to match your situation. Lots of TLCs takes up the arduino SRAM very quickly, so be careful // change this to match your situation. Lots of TLCs takes up the arduino SRAM very quickly, so be careful
//Leave it at at least 1 if you have enabled RA_LIGHTING // Leave it at at least 1 if you have enabled RA_LIGHTING
//The number of TLC5947 boards chained together for use with the animation, additional ones will repeat the animation on them, but are not individually addressable and mimic those before them. You can leave the default at 2 even if you only have 1 TLC5947 module. // The number of TLC5947 boards chained together for use with the animation, additional ones will repeat the animation on them, but are not individually addressable and mimic those before them. You can leave the default at 2 even if you only have 1 TLC5947 module.
#define NUM_TLCS 2 #define NUM_TLCS 2
//These TRANS_ARRAY values let you change the order the LEDs on the lighting modules will animate for chase functions. // These TRANS_ARRAY values let you change the order the LEDs on the lighting modules will animate for chase functions.
//Modify them according to your specific situation. // Modify them according to your specific situation.
//NOTE: the array should be 8 long for every TLC you have. These defaults assume (2) TLCs. // NOTE: the array should be 8 long for every TLC you have. These defaults assume (2) TLCs.
#define TRANS_ARRAY {0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8} //forwards #define TRANS_ARRAY {0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8} //forwards
//#define TRANS_ARRAY {7, 6, 5, 4, 3, 2, 1, 0, 8, 9, 10, 11, 12, 13, 14, 15} //backwards //#define TRANS_ARRAY {7, 6, 5, 4, 3, 2, 1, 0, 8, 9, 10, 11, 12, 13, 14, 15} //backwards
#endif // RA_DISCO #endif // RA_DISCO

9
Marlin/pins_FELIX2.h
View file

@ -30,16 +30,25 @@
#define BOARD_NAME "Felix 2.0+" #define BOARD_NAME "Felix 2.0+"
//
// Heaters / Fans
//
// Power outputs EFBF or EFBE // Power outputs EFBF or EFBE
#define MOSFET_D_PIN 7 #define MOSFET_D_PIN 7
#include "pins_RAMPS.h" #include "pins_RAMPS.h"
//
// Misc. Functions
//
#undef SDPOWER #undef SDPOWER
#define SDPOWER 1 #define SDPOWER 1
#define PS_ON_PIN 12 #define PS_ON_PIN 12
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#define SD_DETECT_PIN 6 #define SD_DETECT_PIN 6

2
Marlin/pins_GEN3_MONOLITHIC.h
View file

@ -68,7 +68,7 @@
#define HEATER_0_PIN 16 #define HEATER_0_PIN 16
// //
// Etc. // Misc. Functions
// //
#define PS_ON_PIN 14 // Alex, does this work on the card? #define PS_ON_PIN 14 // Alex, does this work on the card?

6
Marlin/pins_GEN3_PLUS.h
View file

@ -56,8 +56,6 @@
#define E0_DIR_PIN 21 #define E0_DIR_PIN 21
#define E0_ENABLE_PIN 13 #define E0_ENABLE_PIN 13
#define PS_ON_PIN 14
// //
// Temperature Sensors // Temperature Sensors
// //
@ -71,6 +69,8 @@
#define HEATER_BED_PIN 16 #define HEATER_BED_PIN 16
// //
// SD Card // Misc. Functions
// //
#define SDSS 4 #define SDSS 4
#define PS_ON_PIN 14

16
Marlin/pins_GEN6.h
View file

@ -56,9 +56,9 @@
#define Z_DIR_PIN 28 #define Z_DIR_PIN 28
#define Z_ENABLE_PIN 29 #define Z_ENABLE_PIN 29
#define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715 #define E0_STEP_PIN 4 // Edited @ EJE Electronics 20100715
#define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715 #define E0_DIR_PIN 2 // Edited @ EJE Electronics 20100715
#define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715 #define E0_ENABLE_PIN 3 // Added @ EJE Electronics 20100715
// //
// Temperature Sensor // Temperature Sensor
@ -68,21 +68,17 @@
// //
// Heaters // Heaters
// //
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 #define HEATER_0_PIN 14 // changed @ rkoeppl 20110410
#if !MB(GEN6) #if !MB(GEN6)
#define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410 #define HEATER_BED_PIN 1 // changed @ rkoeppl 20110410
#define TEMP_BED_PIN 0 // Analog Input #define TEMP_BED_PIN 0 // Analog Input
#endif #endif
//
// SD Card
//
#define SDSS 17
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 17
#define DEBUG_PIN 0 #define DEBUG_PIN 0
// RS485 pins // RS485 pins

3
Marlin/pins_GEN7_14.h
View file

@ -70,6 +70,9 @@
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_BED_PIN 3 #define HEATER_BED_PIN 3
//
// Misc. Functions
//
#define PS_ON_PIN 15 #define PS_ON_PIN 15
// A pin for debugging // A pin for debugging

9
Marlin/pins_GEN7_CUSTOM.h
View file

@ -71,13 +71,18 @@
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_BED_PIN 3 // (bed) #define HEATER_BED_PIN 3 // (bed)
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support //
// Misc. Functions
//
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
#define PS_ON_PIN 19 #define PS_ON_PIN 19
// A pin for debugging // A pin for debugging
#define DEBUG_PIN -1 #define DEBUG_PIN -1
//
// LCD / Controller
//
#define BEEPER_PIN -1 #define BEEPER_PIN -1
// 4bit LCD Support // 4bit LCD Support

27
Marlin/pins_K8400.h
View file

@ -37,18 +37,31 @@
#include "pins_3DRAG.h" #include "pins_3DRAG.h"
#undef X_MAX_PIN //
#undef X_MIN_PIN // Limit Switches
#undef Y_MAX_PIN //
#undef Y_MIN_PIN
#define X_STOP_PIN 3 #define X_STOP_PIN 3
#define Y_STOP_PIN 14 #define Y_STOP_PIN 14
#undef X_MIN_PIN
#undef X_MAX_PIN
#undef Y_MIN_PIN
#undef Y_MAX_PIN
//
// Steppers
//
#undef E1_STEP_PIN #undef E1_STEP_PIN
#define E1_STEP_PIN 32 #define E1_STEP_PIN 32
#undef PS_ON_PIN //
#undef KILL_PIN // Heaters / Fans
//
#undef HEATER_1_PIN #undef HEATER_1_PIN
#define HEATER_1_PIN 11 #define HEATER_1_PIN 11
//
// Misc. Functions
//
#undef PS_ON_PIN
#undef KILL_PIN

17
Marlin/pins_LEAPFROG.h
View file

@ -63,14 +63,6 @@
#define E1_DIR_PIN 40 // 40 #define E1_DIR_PIN 40 // 40
#define E1_ENABLE_PIN 36 // 36 #define E1_ENABLE_PIN 36 // 36
//
// Misc. Functions
//
#define SDSS 11
#define LED_PIN 13
#define SOL1_PIN 16
#define SOL2_PIN 17
// //
// Temperature Sensors // Temperature Sensors
// //
@ -88,5 +80,12 @@
#define FAN_PIN 7 #define FAN_PIN 7
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ //
// Misc. Functions
//
#define SDSS 11
#define LED_PIN 13
#define SOL1_PIN 16
#define SOL2_PIN 17
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */

13
Marlin/pins_MEGACONTROLLER.h
View file

@ -82,12 +82,6 @@
#define E1_DIR_PIN 27 #define E1_DIR_PIN 27
#define E1_ENABLE_PIN 25 #define E1_ENABLE_PIN 25
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
// //
// Temperature Sensors // Temperature Sensors
// //
@ -126,6 +120,12 @@
#define FAN_SOFT_PWM #define FAN_SOFT_PWM
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
// //
// LCD / Controller // LCD / Controller
// //
@ -150,4 +150,3 @@
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#endif // MINIPANEL #endif // MINIPANEL

14
Marlin/pins_MEGATRONICS.h
View file

@ -71,13 +71,6 @@
#define E1_DIR_PIN 36 #define E1_DIR_PIN 36
#define E1_ENABLE_PIN 30 #define E1_ENABLE_PIN 30
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
// //
// Temperature Sensors // Temperature Sensors
// //
@ -98,6 +91,13 @@
#define FAN_PIN 7 // IO pin. Buffer needed #define FAN_PIN 7 // IO pin. Buffer needed
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
// //
// LCD / Controller // LCD / Controller
// //

14
Marlin/pins_MEGATRONICS_2.h
View file

@ -75,13 +75,6 @@
#define E2_DIR_PIN 24 #define E2_DIR_PIN 24
#define E2_ENABLE_PIN 22 #define E2_ENABLE_PIN 22
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
// //
// Temperature Sensors // Temperature Sensors
// //
@ -113,6 +106,13 @@
#define FAN_PIN 7 #define FAN_PIN 7
#define FAN1_PIN 6 #define FAN1_PIN 6
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
// //
// LCD / Controller // LCD / Controller
// //

17
Marlin/pins_MEGATRONICS_3.h
View file

@ -63,6 +63,8 @@
#define Z_MIN_PROBE_PIN 19 #define Z_MIN_PROBE_PIN 19
#endif #endif
#define SLED_PIN -1
// //
// Steppers // Steppers
// //
@ -90,14 +92,6 @@
#define E2_DIR_PIN 60 #define E2_DIR_PIN 60
#define E2_ENABLE_PIN 23 #define E2_ENABLE_PIN 23
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define SLED_PIN -1
// //
// Temperature Sensors // Temperature Sensors
// //
@ -133,6 +127,13 @@
#define FAN_PIN 6 #define FAN_PIN 6
#define FAN1_PIN 7 #define FAN1_PIN 7
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
// //
// LCD / Controller // LCD / Controller
// //

26
Marlin/pins_MINIRAMBO.h
View file

@ -54,35 +54,37 @@
#define X_STEP_PIN 37 #define X_STEP_PIN 37
#define X_DIR_PIN 48 #define X_DIR_PIN 48
#define X_ENABLE_PIN 29 #define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36 #define Y_STEP_PIN 36
#define Y_DIR_PIN 49 #define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28 #define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35 #define Z_STEP_PIN 35
#define Z_DIR_PIN 47 #define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27 #define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_STEP_PIN 34 #define E0_STEP_PIN 34
#define E0_DIR_PIN 43 #define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26 #define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN -1 #define E1_STEP_PIN -1
#define E1_DIR_PIN -1 #define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1 #define E1_ENABLE_PIN -1
// Microstepping pins - Mapping not from fastio.h (?)
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define MOTOR_CURRENT_PWM_XY_PIN 46 #define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45 #define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 44 #define MOTOR_CURRENT_PWM_E_PIN 44
//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#define MOTOR_CURRENT_PWM_RANGE 2000 #define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
@ -129,12 +131,12 @@
#define LCD_PINS_D6 85 #define LCD_PINS_D6 85
#define LCD_PINS_D7 71 #define LCD_PINS_D7 71
//buttons are directly attached using AUX-2 // buttons are directly attached using AUX-2
#define BTN_EN1 14 #define BTN_EN1 14
#define BTN_EN2 72 #define BTN_EN2 72
#define BTN_ENC 9 // the click #define BTN_ENC 9 // the click
#define SD_DETECT_PIN 15 #define SD_DETECT_PIN 15
#endif //NEWPANEL #endif // NEWPANEL
#endif //ULTRA_LCD #endif // ULTRA_LCD

11
Marlin/pins_MINITRONICS.h
View file

@ -71,9 +71,6 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define SDSS 16
#define LED_PIN 46
#define TEMP_0_PIN 7 // Analog Input #define TEMP_0_PIN 7 // Analog Input
#define TEMP_1_PIN 6 // Analog Input #define TEMP_1_PIN 6 // Analog Input
#define TEMP_BED_PIN 6 // Analog Input #define TEMP_BED_PIN 6 // Analog Input
@ -87,6 +84,12 @@
#define FAN_PIN 9 #define FAN_PIN 9
//
// Misc. Functions
//
#define SDSS 16
#define LED_PIN 46
// //
// LCD / Controller // LCD / Controller
// //
@ -118,5 +121,5 @@
#define BTN_EN2 -1 #define BTN_EN2 -1
#define BTN_ENC -1 #define BTN_ENC -1
#define SD_DETECT_PIN -1 // Minitronics doesn't use this #define SD_DETECT_PIN -1 // Minitronics doesn't use this
#endif #endif

6
Marlin/pins_MKS_13.h
View file

@ -35,11 +35,17 @@
#define BOARD_NAME "MKS > v1.3" #define BOARD_NAME "MKS > v1.3"
//
// Heaters / Fans
//
// Power outputs EFBF or EFBE // Power outputs EFBF or EFBE
#define MOSFET_D_PIN 7 #define MOSFET_D_PIN 7
#include "pins_RAMPS.h" #include "pins_RAMPS.h"
//
// LCD / Controller
//
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
/** /**
* VIKI2 Has two groups of wires with... * VIKI2 Has two groups of wires with...

3
Marlin/pins_MKS_BASE.h
View file

@ -30,6 +30,9 @@
#define BOARD_NAME "MKS BASE 1.0" #define BOARD_NAME "MKS BASE 1.0"
//
// Heaters / Fans
//
// Power outputs EFBF or EFBE // Power outputs EFBF or EFBE
#define MOSFET_D_PIN 7 #define MOSFET_D_PIN 7

50
Marlin/pins_OMCA.h
View file

@ -57,33 +57,32 @@
#define BOARD_NAME "Final OMCA" #define BOARD_NAME "Final OMCA"
//
// Limit Switches
//
#define X_STOP_PIN 0
#define Y_STOP_PIN 1
#define Z_STOP_PIN 2
//
// Steppers
//
#define X_STEP_PIN 26 #define X_STEP_PIN 26
#define X_DIR_PIN 25 #define X_DIR_PIN 25
#define X_ENABLE_PIN 10 #define X_ENABLE_PIN 10
#define X_STOP_PIN 0
#define Y_STEP_PIN 28 #define Y_STEP_PIN 28
#define Y_DIR_PIN 27 #define Y_DIR_PIN 27
#define Y_ENABLE_PIN 10 #define Y_ENABLE_PIN 10
#define Y_STOP_PIN 1
#define Z_STEP_PIN 23 #define Z_STEP_PIN 23
#define Z_DIR_PIN 22 #define Z_DIR_PIN 22
#define Z_ENABLE_PIN 10 #define Z_ENABLE_PIN 10
#define Z_STOP_PIN 2
#define E0_STEP_PIN 24 #define E0_STEP_PIN 24
#define E0_DIR_PIN 21 #define E0_DIR_PIN 21
#define E0_ENABLE_PIN 10 #define E0_ENABLE_PIN 10
// future proofing
#define __FS 20
#define __FD 19
#define __GS 18
#define __GD 13
#define UNUSED_PWM 14 // PWM on LEFT connector
#define E1_STEP_PIN -1 // 21 #define E1_STEP_PIN -1 // 21
#define E1_DIR_PIN -1 // 20 #define E1_DIR_PIN -1 // 20
#define E1_ENABLE_PIN -1 // 19 #define E1_ENABLE_PIN -1 // 19
@ -92,16 +91,33 @@
#define E2_DIR_PIN -1 // 20 #define E2_DIR_PIN -1 // 20
#define E2_ENABLE_PIN -1 // 18 #define E2_ENABLE_PIN -1 // 18
#define SDSS 11 //
#define FAN_PIN 14 // PWM on MIDDLE connector // Temperature Sensors
//
#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector
#define HEATER_BED_PIN 4
#define TEMP_0_PIN 0 // Analog Input #define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 1 // Analog Input #define TEMP_1_PIN 1 // Analog Input
#define TEMP_BED_PIN 2 // Analog Input (1,2 or I2C) #define TEMP_BED_PIN 2 // Analog Input (1,2 or I2C)
//
// Heaters / Fans
//
#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector
#define HEATER_BED_PIN 4
#define FAN_PIN 14 // PWM on MIDDLE connector
//
// Misc. Functions
//
#define SDSS 11
#define I2C_SCL 16 #define I2C_SCL 16
#define I2C_SDA 17 #define I2C_SDA 17
// future proofing
#define __FS 20
#define __FD 19
#define __GS 18
#define __GD 13
#define UNUSED_PWM 14 // PWM on LEFT connector

4
Marlin/pins_OMCA_A.h
View file

@ -99,8 +99,12 @@
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define FAN_PIN 3 #define FAN_PIN 3
//
// Misc. Functions
//
#define SDSS 11 #define SDSS 11
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */

75
Marlin/pins_PRINTRBOARD.h
View file

@ -43,6 +43,20 @@
// Disable JTAG pins so they can be used for the Extrudrboard // Disable JTAG pins so they can be used for the Extrudrboard
#define DISABLE_JTAG true #define DISABLE_JTAG true
//
// Limit Switches
//
#define X_STOP_PIN 35
#if ENABLED(SDSUPPORT)
#define Y_STOP_PIN 37 // Move Ystop to Estop socket
#else
#define Y_STOP_PIN 8 // Ystop in Ystop socket
#endif
#define Z_STOP_PIN 36
//
// Steppers
//
#define X_STEP_PIN 0 #define X_STEP_PIN 0
#define X_DIR_PIN 1 #define X_DIR_PIN 1
#define X_ENABLE_PIN 39 #define X_ENABLE_PIN 39
@ -59,7 +73,16 @@
#define E0_DIR_PIN 7 #define E0_DIR_PIN 7
#define E0_ENABLE_PIN 19 #define E0_ENABLE_PIN 19
#define HEATER_0_PIN 21 // Extruder //
// Temperature Sensors
//
#define TEMP_0_PIN 1 // Analog Input
#define TEMP_BED_PIN 0 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN 46 #define HEATER_1_PIN 46
#define HEATER_2_PIN 47 #define HEATER_2_PIN 47
#define HEATER_BED_PIN 20 #define HEATER_BED_PIN 20
@ -72,40 +95,32 @@
#define FAN_PIN 16 #define FAN_PIN 16
#endif #endif
#define X_STOP_PIN 35 //
#if ENABLED(SDSUPPORT) // Misc. Functions
#define Y_STOP_PIN 37 // Move Ystop to Estop socket //
#else #define SDSS 26
#define Y_STOP_PIN 8 // Ystop in Ystop socket
#endif
#define Z_STOP_PIN 36
#define TEMP_0_PIN 1 // Analog Input
#define TEMP_BED_PIN 0 // Analog Input
#define FILWIDTH_PIN 2 // Analog Input #define FILWIDTH_PIN 2 // Analog Input
////LCD Pin Setup//// //
// LCD / Controller
#define SDSS 26 //
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
//we have no buzzer installed // we have no buzzer installed
#define BEEPER_PIN -1 #define BEEPER_PIN -1
//LCD Pins // LCD Pins
#if ENABLED(LCD_I2C_PANELOLU2) #if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 27 //RX1 - fastio.h pin mapping 27 #define BTN_EN1 27 // RX1 - fastio.h pin mapping 27
#define BTN_EN2 26 //TX1 - fastio.h pin mapping 26 #define BTN_EN2 26 // TX1 - fastio.h pin mapping 26
#define BTN_ENC 43 //A3 - fastio.h pin mapping 43 #define BTN_ENC 43 // A3 - fastio.h pin mapping 43
#define SDSS 40 //use SD card on Panelolu2 (Teensyduino pin mapping) #define SDSS 40 // use SD card on Panelolu2 (Teensyduino pin mapping)
#else #else
#define BTN_EN1 16 #define BTN_EN1 16
#define BTN_EN2 17 #define BTN_EN2 17
#define BTN_ENC 18//the click #define BTN_ENC 18 // the click
#endif // LCD_I2C_PANELOLU2 #endif // LCD_I2C_PANELOLU2
//not connected to a pin // not connected to a pin
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
#define LCD_PINS_RS 9 #define LCD_PINS_RS 9
@ -118,14 +133,14 @@
#endif // ULTRA_LCD && NEWPANEL #endif // ULTRA_LCD && NEWPANEL
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
//FastIO // FastIO
#define BEEPER_PIN 32 #define BEEPER_PIN 32
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 42 //Non-FastIO #define DOGLCD_A0 42 // Non-FastIO
#define DOGLCD_CS 43 //Non-FastIO #define DOGLCD_CS 43 // Non-FastIO
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
//The encoder and click button (FastIO Pins) // The encoder and click button (FastIO Pins)
#define BTN_EN1 26 #define BTN_EN1 26
#define BTN_EN2 27 #define BTN_EN2 27
#define BTN_ENC 47 #define BTN_ENC 47
@ -133,7 +148,7 @@
#define SDSS 45 #define SDSS 45
#define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test) #define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test)
#define STAT_LED_RED_PIN 12 //Non-FastIO #define STAT_LED_RED_PIN 12 // Non-FastIO
#define STAT_LED_BLUE_PIN 10 //Non-FastIO #define STAT_LED_BLUE_PIN 10 // Non-FastIO
#endif #endif

77
Marlin/pins_PRINTRBOARD_REVF.h
View file

@ -38,6 +38,16 @@
#define BOARD_NAME "Printrboard Rev F" #define BOARD_NAME "Printrboard Rev F"
#define LARGE_FLASH true #define LARGE_FLASH true
//
// Limit Switches
//
#define X_STOP_PIN 35
#define Y_STOP_PIN 12
#define Z_STOP_PIN 36
//
// Steppers
//
#define X_STEP_PIN 0 #define X_STEP_PIN 0
#define X_DIR_PIN 1 #define X_DIR_PIN 1
#define X_ENABLE_PIN 39 #define X_ENABLE_PIN 39
@ -54,7 +64,28 @@
#define E0_DIR_PIN 7 #define E0_DIR_PIN 7
#define E0_ENABLE_PIN 19 #define E0_ENABLE_PIN 19
#define HEATER_0_PIN 21 // Extruder // uncomment to enable an I2C based DAC like on the Printrboard REVF
#define DAC_STEPPER_CURRENT
// Number of channels available for DAC, For Printrboar REVF there are 4
#define DAC_STEPPER_ORDER { 3, 2, 1, 0 }
#define DAC_STEPPER_SENSE 0.11
#define DAC_STEPPER_ADDRESS 0
#define DAC_STEPPER_MAX 3520
#define DAC_STEPPER_VREF 1 // internal Vref, gain 1x = 2.048V
#define DAC_STEPPER_GAIN 0
#define DAC_OR_ADDRESS 0x00
//
// Temperature Sensors
//
#define TEMP_0_PIN 1 // Analog Input (Extruder)
#define TEMP_BED_PIN 0 // Analog Input (Bed)
//
// Heaters / Fans
//
#define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN 46 #define HEATER_1_PIN 46
#define HEATER_2_PIN 47 #define HEATER_2_PIN 47
#define HEATER_BED_PIN 20 #define HEATER_BED_PIN 20
@ -67,31 +98,15 @@
#define FAN_PIN 16 #define FAN_PIN 16
#endif #endif
#define X_STOP_PIN 35 //
#define Y_STOP_PIN 12 // Misc. Functions
#define Z_STOP_PIN 36 //
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#define FILWIDTH_PIN 2 // ANALOG NUMBERING
////LCD Pin Setup////
#define SDSS 20 // Teensylu pin mapping #define SDSS 20 // Teensylu pin mapping
#define FILWIDTH_PIN 2 // Analog Input
// uncomment to enable an I2C based DAC like on the Printrboard REVF //
#define DAC_STEPPER_CURRENT // LCD / Controller
// Number of channels available for DAC, For Printrboar REVF there are 4 //
#define DAC_STEPPER_ORDER { 3, 2, 1, 0 }
#define DAC_STEPPER_SENSE 0.11
#define DAC_STEPPER_ADDRESS 0
#define DAC_STEPPER_MAX 3520
#define DAC_STEPPER_VREF 1 //internal Vref, gain 1x = 2.048V
#define DAC_STEPPER_GAIN 0
#define DAC_OR_ADDRESS 0x00
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define BEEPER_PIN -1 #define BEEPER_PIN -1
@ -104,11 +119,11 @@
#define BTN_EN1 16 #define BTN_EN1 16
#define BTN_EN2 17 #define BTN_EN2 17
#define BTN_ENC 18//the click #define BTN_ENC 18 // the click
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
//encoder rotation values // encoder rotation values
#define encrot0 0 #define encrot0 0
#define encrot1 2 #define encrot1 2
#define encrot2 3 #define encrot2 3
@ -116,9 +131,9 @@
#endif #endif
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 32 //FastIO #define BEEPER_PIN 32 // FastIO
#define DOGLCD_A0 42 //Non-FastIO #define DOGLCD_A0 42 // Non-FastIO
#define DOGLCD_CS 43 //Non-FastIO #define DOGLCD_CS 43 // Non-FastIO
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
// (FastIO Pins) // (FastIO Pins)
@ -129,6 +144,6 @@
#define SDSS 45 #define SDSS 45
#define SD_DETECT_PIN -1 // FastIO (Manual says 72) #define SD_DETECT_PIN -1 // FastIO (Manual says 72)
#define STAT_LED_RED_PIN 12 //Non-FastIO #define STAT_LED_RED_PIN 12 // Non-FastIO
#define STAT_LED_BLUE_PIN 10 //Non-FastIO #define STAT_LED_BLUE_PIN 10 // Non-FastIO
#endif #endif

53
Marlin/pins_RAMBO.h
View file

@ -56,6 +56,13 @@
#define SERVO2_PIN 24 // Motor header MX3 #define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5 #define SERVO3_PIN 5 // PWM header pin 5
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 30
#endif
#if ENABLED(Z_PROBE_SLED) #if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
@ -70,43 +77,38 @@
#define Z_MIN_PIN 10 #define Z_MIN_PIN 10
#define Z_MAX_PIN 30 #define Z_MAX_PIN 30
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 30
#endif
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 37 #define X_STEP_PIN 37
#define X_DIR_PIN 48 #define X_DIR_PIN 48
#define X_ENABLE_PIN 29 #define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36 #define Y_STEP_PIN 36
#define Y_DIR_PIN 49 #define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28 #define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35 #define Z_STEP_PIN 35
#define Z_DIR_PIN 47 #define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27 #define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_STEP_PIN 34 #define E0_STEP_PIN 34
#define E0_DIR_PIN 43 #define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26 #define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN 33 #define E1_STEP_PIN 33
#define E1_DIR_PIN 42 #define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25 #define E1_ENABLE_PIN 25
// Microstepping pins - Mapping not from fastio.h (?)
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_MS1_PIN 63 #define E1_MS1_PIN 63
#define E1_MS2_PIN 64 #define E1_MS2_PIN 64
@ -116,9 +118,9 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 0 #define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 1 #define TEMP_1_PIN 1 // Analog Input
#define TEMP_BED_PIN 2 #define TEMP_BED_PIN 2 // Analog Input
// //
// Heaters / Fans // Heaters / Fans
@ -137,9 +139,12 @@
// //
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FILWIDTH_PIN 3 // ANALOG NUMBERING #define FILWIDTH_PIN 3 // Analog Input
#define PS_ON_PIN 4 #define PS_ON_PIN 4
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define KILL_PIN 80 #define KILL_PIN 80
@ -155,9 +160,9 @@
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 44 #define BEEPER_PIN 44
//NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the // NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the
// beeper/buzzer is connected to pin 33; however, the pin used in the // beeper/buzzer is connected to pin 33; however, the pin used in the
// diagram is actually pin 44, so this is correct. // diagram is actually pin 44, so this is correct.
#define DOGLCD_A0 70 #define DOGLCD_A0 70
#define DOGLCD_CS 71 #define DOGLCD_CS 71
@ -185,12 +190,12 @@
#endif // VIKI2/miniVIKI #endif // VIKI2/miniVIKI
#else //!NEWPANEL - old style panel with shift register #else // !NEWPANEL - old style panel with shift register
// No Beeper added // No Beeper added
#define BEEPER_PIN 33 #define BEEPER_PIN 33
//buttons are attached to a shift register // buttons are attached to a shift register
// Not wired yet // Not wired yet
//#define SHIFT_CLK 38 //#define SHIFT_CLK 38
//#define SHIFT_LD 42 //#define SHIFT_LD 42

59
Marlin/pins_RAMPS.h
View file

@ -85,6 +85,8 @@
#define Z_MIN_PROBE_PIN 32 #define Z_MIN_PROBE_PIN 32
#endif #endif
#define SLED_PIN -1
// //
// Steppers // Steppers
// //
@ -111,24 +113,16 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 13 // Analog Input
#define TEMP_1_PIN 15 // ANALOG NUMBERING #define TEMP_1_PIN 15 // Analog Input
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // Analog Input
// // SPI for Max6675 or Max31855 Thermocouple
// Misc. Functions #if DISABLED(SDSUPPORT)
// #define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#define SDSS 53 #else
#define LED_PIN 13 #define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
#define FILWIDTH_PIN 5 // ANALOG NUMBERING
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#define FIL_RUNOUT_PIN 4
#define PS_ON_PIN 12
#define SLED_PIN -1
// //
// Augmentation for auto-assigning RAMPS plugs // Augmentation for auto-assigning RAMPS plugs
@ -193,15 +187,29 @@
#define FAN_PIN 4 // IO pin. Buffer needed #define FAN_PIN 4 // IO pin. Buffer needed
#endif #endif
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
#define FILWIDTH_PIN 5 // Analog Input
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#define FIL_RUNOUT_PIN 4
#define PS_ON_PIN 12
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 //CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 //SID (MOSI) #define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 //SCK (CLK) clock #define LCD_PINS_D4 52 // SCK (CLK) clock
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE) #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
#define LCD_PINS_RS 40 #define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42 #define LCD_PINS_ENABLE 42
@ -309,11 +317,11 @@
//#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270 //#define LCD_SCREEN_ROT_270
//The encoder and click button // The encoder and click button
#define BTN_EN1 40 #define BTN_EN1 40
#define BTN_EN2 63 #define BTN_EN2 63
#define BTN_ENC 59 #define BTN_ENC 59
//not connected to a pin // not connected to a pin
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#else #else
@ -350,10 +358,3 @@
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // ULTRA_LCD
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif

30
Marlin/pins_RAMPS_OLD.h
View file

@ -69,18 +69,18 @@
#define E0_DIR_PIN 34 #define E0_DIR_PIN 34
#define E0_ENABLE_PIN 30 #define E0_ENABLE_PIN 30
//
// Misc. Functions
//
#define SDPOWER 48
#define SDSS 53
#define LED_PIN 13
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 2 // Analog Input
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_BED_PIN 1 // Analog Input
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
// //
// Heaters / Fans // Heaters / Fans
@ -95,9 +95,9 @@
#define FAN_PIN 9 #define FAN_PIN 9
#endif #endif
// SPI for Max6675 or Max31855 Thermocouple //
#if DISABLED(SDSUPPORT) // Misc. Functions
#define MAX6675_SS 66// Do not use pin 53 if there is even the remote possibility of using Display/SD card //
#else #define SDPOWER 48
#define MAX6675_SS 66// Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define SDSS 53
#endif #define LED_PIN 13

102
Marlin/pins_RIGIDBOARD.h
View file

@ -26,21 +26,75 @@
#define BOARD_NAME "RigidBoard" #define BOARD_NAME "RigidBoard"
#define RAMPS_D10_PIN 9 // EXTRUDER 1 //
#define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN // Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN #ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19 // Z-MAX pin J14 End Stops #define Z_MIN_PROBE_PIN 19 // Z-MAX pin J14 End Stops
#endif #endif
#include "pins_RAMPS.h" #include "pins_RAMPS.h"
//
// Steppers
//
// RigidBot swaps E0 / E1 plugs vs RAMPS 1.3
#undef E0_STEP_PIN
#undef E0_DIR_PIN
#undef E0_ENABLE_PIN
#define E0_STEP_PIN 36
#define E0_DIR_PIN 34
#define E0_ENABLE_PIN 30
#undef E1_STEP_PIN
#undef E1_DIR_PIN
#undef E1_ENABLE_PIN
#define E1_STEP_PIN 26
#define E1_DIR_PIN 28
#define E1_ENABLE_PIN 24
#define STEPPER_RESET_PIN 41 // Stepper drivers have a reset on RigidBot
//
// Temperature Sensors
//
#undef TEMP_0_PIN #undef TEMP_0_PIN
#undef TEMP_1_PIN #undef TEMP_1_PIN
#define TEMP_0_PIN 14 // ANALOG NUMBERING #undef TEMP_BED_PIN
#define TEMP_1_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 14 // Analog Input
#define TEMP_1_PIN 13 // Analog Input
#define TEMP_BED_PIN 15 // Analog Input
// SPI for Max6675 or Max31855 Thermocouple
#undef MAX6675_SS
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
//
// Heaters / Fans
//
#define RAMPS_D10_PIN 9 // EXTRUDER 1
#define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN
#undef HEATER_BED_PIN
#define HEATER_BED_PIN 10
#undef FAN_PIN
#define FAN_PIN 8 // Same as RAMPS_13_EEF
//
// Misc. Functions
//
#undef PS_ON_PIN
#define PS_ON_PIN -1
//
// LCD / Controller
//
// LCD Panel options for the RigidBoard // LCD Panel options for the RigidBoard
#if ENABLED(RIGIDBOT_PANEL) #if ENABLED(RIGIDBOT_PANEL)
#undef BEEPER_PIN #undef BEEPER_PIN
@ -77,41 +131,3 @@
#define KILL_PIN 32 #define KILL_PIN 32
#endif #endif
// SPI for Max6675 or Max31855 Thermocouple
#undef MAX6675_SS
#if ENABLED(SDSUPPORT)
#define MAX6675_SS 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#else
#define MAX6675_SS 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card
#endif
// RigidBot swaps E0 / E1 plugs vs RAMPS 1.3
#undef E0_STEP_PIN
#undef E0_DIR_PIN
#undef E0_ENABLE_PIN
#define E0_STEP_PIN 36
#define E0_DIR_PIN 34
#define E0_ENABLE_PIN 30
#undef E1_STEP_PIN
#undef E1_DIR_PIN
#undef E1_ENABLE_PIN
#define E1_STEP_PIN 26
#define E1_DIR_PIN 28
#define E1_ENABLE_PIN 24
#undef FAN_PIN
#define FAN_PIN 8 // Same as RAMPS_13_EEF
#undef PS_ON_PIN
#define PS_ON_PIN -1
#undef HEATER_BED_PIN
#define HEATER_BED_PIN 10
#undef TEMP_BED_PIN
#define TEMP_BED_PIN 15 // ANALOG NUMBERING
#define STEPPER_RESET_PIN 41 // Stepper drivers have a reset on RigidBot

5
Marlin/pins_RIGIDBOARD_V2.h
View file

@ -29,12 +29,15 @@
#undef BOARD_NAME #undef BOARD_NAME
#define BOARD_NAME "RigidBoard V2" #define BOARD_NAME "RigidBoard V2"
//
// Steppers
//
// I2C based DAC like on the Printrboard REVF // I2C based DAC like on the Printrboard REVF
#define DAC_STEPPER_CURRENT #define DAC_STEPPER_CURRENT
// Channels available for DAC, For Rigidboard there are 4 // Channels available for DAC, For Rigidboard there are 4
#define DAC_STEPPER_ORDER { 0, 1, 2, 3 } #define DAC_STEPPER_ORDER { 0, 1, 2, 3 }
#define DAC_STEPPER_SENSE 0.05 //sense resistors on rigidboard stepper chips are .05 value #define DAC_STEPPER_SENSE 0.05 // sense resistors on rigidboard stepper chips are .05 value
#define DAC_STEPPER_ADDRESS 0 #define DAC_STEPPER_ADDRESS 0
#define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096 #define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096
#define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V #define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V

56
Marlin/pins_RUMBA.h
View file

@ -35,6 +35,11 @@
#define DEFAULT_MACHINE_NAME "Rumba" #define DEFAULT_MACHINE_NAME "Rumba"
#define BOARD_NAME "Rumba" #define BOARD_NAME "Rumba"
//
// Servos
//
#define SERVO0_PIN 5
// //
// Limit Switches // Limit Switches
// //
@ -79,33 +84,34 @@
#define E2_DIR_PIN 28 #define E2_DIR_PIN 28
#define E2_ENABLE_PIN 39 #define E2_ENABLE_PIN 39
//
// Misc. Functions
//
#define LED_PIN 13
#define PS_ON_PIN 45
#define KILL_PIN 46
// //
// Temperature Sensors // Temperature Sensors
// //
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used #define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used)
#else #else
#define TEMP_0_PIN 15 // ANALOG NUMBERING - default connector for thermistor *T0* on rumba board is used #define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used)
#endif #endif
#if TEMP_SENSOR_1 == -1 #if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used #define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used)
#else #else
#define TEMP_1_PIN 14 // ANALOG NUMBERING - default connector for thermistor *T1* on rumba board is used #define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used)
#endif #endif
#if TEMP_SENSOR_2 == -1 #if TEMP_SENSOR_2 == -1
#define TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple #define TEMP_2_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple)
#else #else
#define TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used #define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used)
#endif
// optional for extruder 4 or chamber:
//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple)
#else
#define TEMP_BED_PIN 11 // Analog Input (default connector for thermistor *THB* on rumba board is used)
#endif #endif
// //
@ -120,16 +126,17 @@
#define FAN_PIN 7 #define FAN_PIN 7
#define FAN1_PIN 8 #define FAN1_PIN 8
//optional for extruder 4 or chamber: //
// #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used // Misc. Functions
//
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
#else
#define TEMP_BED_PIN 11 // ANALOG NUMBERING - default connector for thermistor *THB* on rumba board is used
#endif
#define SDSS 53 #define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 45
#define KILL_PIN 46
//
// LCD / Controller
//
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#define BEEPER_PIN 44 #define BEEPER_PIN 44
#define LCD_PINS_RS 19 #define LCD_PINS_RS 19
@ -141,6 +148,3 @@
#define BTN_EN1 11 #define BTN_EN1 11
#define BTN_EN2 12 #define BTN_EN2 12
#define BTN_ENC 43 #define BTN_ENC 43
#define SERVO0_PIN 5

3
Marlin/pins_SAINSMART_2IN1.h
View file

@ -30,6 +30,9 @@
#define BOARD_NAME "Sainsmart" #define BOARD_NAME "Sainsmart"
//
// Heaters / Fans
//
#define RAMPS_D10_PIN 9 // E #define RAMPS_D10_PIN 9 // E
#define RAMPS_D9_PIN 7 // F PART FAN in front of board next to Extruder heat #define RAMPS_D9_PIN 7 // F PART FAN in front of board next to Extruder heat
// RAMPS_D8_PIN 8 // B // RAMPS_D8_PIN 8 // B

82
Marlin/pins_SANGUINOLOLU_11.h
View file

@ -34,35 +34,44 @@
#define IS_MELZI (MB(MELZI) || MB(MELZI_MAKR3D)) #define IS_MELZI (MB(MELZI) || MB(MELZI_MAKR3D))
#define X_STEP_PIN 15 //
#define X_DIR_PIN 21 // Limit Switches
//
#define X_STOP_PIN 18 #define X_STOP_PIN 18
#define Y_STEP_PIN 22
#define Y_DIR_PIN 23
#define Y_STOP_PIN 19 #define Y_STOP_PIN 19
#define Z_STEP_PIN 3
#define Z_DIR_PIN 2
#define Z_STOP_PIN 20 #define Z_STOP_PIN 20
#define E0_STEP_PIN 1 //
#define E0_DIR_PIN 0 // Z Probe (when not Z_MIN_PIN)
//
#if MB(AZTEEG_X1) || MB(STB_11) || IS_MELZI
#define FAN_PIN 4 // Works for Panelolu2 too
#endif
#if IS_MELZI
#define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368.
#elif MB(STB_11)
#define LCD_BACKLIGHT_PIN 17 // LCD backlight LED
#endif
#if ENABLED(Z_PROBE_SLED) #if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
//
// Steppers
//
#define X_STEP_PIN 15
#define X_DIR_PIN 21
#define Y_STEP_PIN 22
#define Y_DIR_PIN 23
#define Z_STEP_PIN 3
#define Z_DIR_PIN 2
#define E0_STEP_PIN 1
#define E0_DIR_PIN 0
//
// Temperature Sensors
//
#define TEMP_0_PIN 7 // Analog Input (pin 33 extruder)
#define TEMP_BED_PIN 6 // Analog Input (pin 34 bed)
//
// Heaters / Fans
//
#define HEATER_0_PIN 13 // (extruder) #define HEATER_0_PIN 13 // (extruder)
#if ENABLED(SANGUINOLOLU_V_1_2) #if ENABLED(SANGUINOLOLU_V_1_2)
@ -79,7 +88,7 @@
#else #else
#define HEATER_BED_PIN 14 // (bed) #define HEATER_BED_PIN 14 // (bed)
#define X_ENABLE_PIN -1 #define X_ENABLE_PIN -1
#define Y_ENABLE_PIN -1 #define Y_ENABLE_PIN -1
#define Z_ENABLE_PIN -1 #define Z_ENABLE_PIN -1
@ -87,16 +96,29 @@
#endif #endif
#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) #if MB(AZTEEG_X1) || MB(STB_11) || IS_MELZI
#define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) #define FAN_PIN 4 // Works for Panelolu2 too
#define SDSS 31 #endif
//
// Misc. Functions
//
/** /**
* On some broken versions of the Sanguino libraries the pin definitions are wrong, * On some broken versions of the Sanguino libraries the pin definitions are wrong,
* which then needs SDSS as pin 24. But you should upgrade your Sanguino libraries! See #368. * which then needs SDSS as pin 24. But you should upgrade your Sanguino libraries! See #368.
*/ */
//#define SDSS 24 //#define SDSS 24
#define SDSS 31
#if IS_MELZI
#define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368.
#elif MB(STB_11)
#define LCD_BACKLIGHT_PIN 17 // LCD backlight LED
#endif
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
// No buzzer installed // No buzzer installed
@ -105,12 +127,12 @@
// LCD Pins // LCD Pins
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
#if ENABLED(U8GLIB_ST7920) //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0 #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
#if IS_MELZI // Melzi board #if IS_MELZI // Melzi board
#define LCD_PINS_RS 30 //CS chip select /SS chip slave select #define LCD_PINS_RS 30 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 29 //SID (MOSI) #define LCD_PINS_ENABLE 29 // SID (MOSI)
#define LCD_PINS_D4 17 //SCK (CLK) clock #define LCD_PINS_D4 17 // SCK (CLK) clock
// Pin 27 is taken by LED_PIN, but Melzi LED does nothing with // Pin 27 is taken by LED_PIN, but Melzi LED does nothing with
// Marlin so this can be used for BEEPER_PIN. You can use this pin // Marlin so this can be used for BEEPER_PIN. You can use this pin
// with M42 instead of BEEPER_PIN. // with M42 instead of BEEPER_PIN.
@ -162,7 +184,7 @@
#else #else
#define BTN_ENC 16 #define BTN_ENC 16
#define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi #define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi
#endif //Panelolu2 #endif // Panelolu2
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1

45
Marlin/pins_SAV_MKI.h
View file

@ -38,6 +38,22 @@
#define USBCON 1286 // Disable MarlinSerial etc. #define USBCON 1286 // Disable MarlinSerial etc.
#define LARGE_FLASH true #define LARGE_FLASH true
//
// Servos
//
#define SERVO0_PIN 41 // In teensy's pin definition for pinMode (in servo.cpp)
//
// Limit Switches
//
#define X_STOP_PIN 13
#define Y_STOP_PIN 14
//#define Z_STOP_PIN 15
#define Z_STOP_PIN 36 // For inductive sensor.
//
// Steppers
//
#define X_STEP_PIN 0 #define X_STEP_PIN 0
#define X_DIR_PIN 1 #define X_DIR_PIN 1
#define X_ENABLE_PIN 39 #define X_ENABLE_PIN 39
@ -54,19 +70,25 @@
#define E0_DIR_PIN 7 #define E0_DIR_PIN 7
#define E0_ENABLE_PIN 19 #define E0_ENABLE_PIN 19
//
// Temperature Sensors
//
#define TEMP_0_PIN 7 // Analog Input (Extruder)
#define TEMP_BED_PIN 6 // Analog Input (Bed)
//
// Heaters / Fans
//
#define HEATER_0_PIN 21 // Extruder #define HEATER_0_PIN 21 // Extruder
#define HEATER_BED_PIN 20 // Bed #define HEATER_BED_PIN 20 // Bed
#define FAN_PIN 16 // Fan -- from Teensyduino environment.
#define FAN_PIN 16 // Fan -- from Teensyduino environment.
// For the fan and Teensyduino uses a different pin mapping. // For the fan and Teensyduino uses a different pin mapping.
#define X_STOP_PIN 13
#define Y_STOP_PIN 14
//#define Z_STOP_PIN 15
#define Z_STOP_PIN 36 // For inductive sensor.
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering //
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering // Misc. Functions
//
#define SDSS 20 // PB0 - 8 in marlin env. #define SDSS 20 // PB0 - 8 in marlin env.
// Extension header pin mapping // Extension header pin mapping
// ---------------------------- // ----------------------------
@ -94,6 +116,9 @@
#define EXT_AUX_A4_IO 44 // Digital IO, 42 (teensy), 44 (marlin) #define EXT_AUX_A4_IO 44 // Digital IO, 42 (teensy), 44 (marlin)
//
// LCD / Controller
//
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#define LCD_PINS_RS -1 #define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1 #define LCD_PINS_ENABLE -1
@ -116,5 +141,3 @@
#define KILL_PIN EXT_AUX_A2_IO #define KILL_PIN EXT_AUX_A2_IO
#define HOME_PIN EXT_AUX_A4_IO #define HOME_PIN EXT_AUX_A4_IO
#endif // SAV_3DLCD || SAV_3DGLCD #endif // SAV_3DLCD || SAV_3DGLCD
#define SERVO0_PIN 41 // In teensy's pin definition for pinMode (in servo.cpp)

15
Marlin/pins_SETHI.h
View file

@ -64,8 +64,8 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 1 #define TEMP_0_PIN 1 // Analog Input
#define TEMP_BED_PIN 2 #define TEMP_BED_PIN 2 // Analog Input
// //
// Heaters / Fans // Heaters / Fans
@ -81,15 +81,18 @@
#define FAN_PIN 31 #define FAN_PIN 31
#endif #endif
//
// Misc. Functions
//
#define PS_ON_PIN 15 #define PS_ON_PIN 15
//All these generations of Gen7 supply thermistor power // All these generations of Gen7 supply thermistor power
//via PS_ON, so ignore bad thermistor readings // via PS_ON, so ignore bad thermistor readings
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE #define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//our pin for debugging. // our pin for debugging.
#define DEBUG_PIN 0 #define DEBUG_PIN 0
//our RS485 pins // our RS485 pins
#define TX_ENABLE_PIN 12 #define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13 #define RX_ENABLE_PIN 13

62
Marlin/pins_TEENSY2.h
View file

@ -79,37 +79,55 @@
#define USBCON 1286 // Disable MarlinSerial etc. #define USBCON 1286 // Disable MarlinSerial etc.
#define LARGE_FLASH true #define LARGE_FLASH true
#define X_STEP_PIN 28 // 0 Marlin //
#define X_DIR_PIN 29 // 1 Marlin // Limit Switches
#define X_ENABLE_PIN 26 //
#define Y_STEP_PIN 30 // 2 Marlin
#define Y_DIR_PIN 31 // 3
#define Y_ENABLE_PIN 26 // Shared w/x
#define Z_STEP_PIN 32 // 4
#define Z_DIR_PIN 33 // 5
#define Z_ENABLE_PIN 26 // Shared w/x
#define E0_STEP_PIN 34 // 6
#define E0_DIR_PIN 35 // 7
#define E0_ENABLE_PIN 26 // Shared w/x
#define HEATER_0_PIN 15 // 21 // Extruder
#define HEATER_BED_PIN 14 // 20 // Bed
#define FAN_PIN 16 // 22 // Fan
#define X_STOP_PIN 2 #define X_STOP_PIN 2
#define Y_STOP_PIN 3 #define Y_STOP_PIN 3
#define Z_STOP_PIN 4 #define Z_STOP_PIN 4
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering //
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering // Steppers
//
#define X_STEP_PIN 28 // 0 Marlin
#define X_DIR_PIN 29 // 1 Marlin
#define X_ENABLE_PIN 26
#define Y_STEP_PIN 30 // 2 Marlin
#define Y_DIR_PIN 31 // 3
#define Y_ENABLE_PIN 26 // Shared w/x
#define Z_STEP_PIN 32 // 4
#define Z_DIR_PIN 33 // 5
#define Z_ENABLE_PIN 26 // Shared w/x
#define E0_STEP_PIN 34 // 6
#define E0_DIR_PIN 35 // 7
#define E0_ENABLE_PIN 26 // Shared w/x
//
// Temperature Sensors
//
#define TEMP_0_PIN 7 // Analog Input (Extruder)
#define TEMP_BED_PIN 6 // Analog Input (Bed)
//
// Heaters / Fans
//
#define HEATER_0_PIN 15 // 21 // Extruder
#define HEATER_BED_PIN 14 // 20 // Bed
#define FAN_PIN 16 // 22 // Fan
//
// Misc. Functions
//
#define SDSS 20 // 8 #define SDSS 20 // 8
#define LED_PIN 6 #define LED_PIN 6
#define PS_ON_PIN 27 #define PS_ON_PIN 27
//
// LCD / Controller
//
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
#define LCD_PINS_RS 8 #define LCD_PINS_RS 8
#define LCD_PINS_ENABLE 9 #define LCD_PINS_ENABLE 9

39
Marlin/pins_TEENSYLU.h
View file

@ -40,6 +40,16 @@
#define USBCON 1286 // Disable MarlinSerial etc. #define USBCON 1286 // Disable MarlinSerial etc.
#define LARGE_FLASH true #define LARGE_FLASH true
//
// Limit Switches
//
#define X_STOP_PIN 13
#define Y_STOP_PIN 14
#define Z_STOP_PIN 15
//
// Steppers
//
#define X_STEP_PIN 0 #define X_STEP_PIN 0
#define X_DIR_PIN 1 #define X_DIR_PIN 1
#define X_ENABLE_PIN 39 #define X_ENABLE_PIN 39
@ -56,6 +66,15 @@
#define E0_DIR_PIN 7 #define E0_DIR_PIN 7
#define E0_ENABLE_PIN 19 #define E0_ENABLE_PIN 19
//
// Temperature Sensors
//
#define TEMP_0_PIN 7 // Analog Input (Extruder)
#define TEMP_BED_PIN 6 // Analog Input (Bed)
//
// Heaters / Fans
//
#define HEATER_0_PIN 21 // Extruder #define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN 46 #define HEATER_1_PIN 46
#define HEATER_2_PIN 47 #define HEATER_2_PIN 47
@ -69,23 +88,23 @@
#define FAN_PIN 16 #define FAN_PIN 16
#endif #endif
#define X_STOP_PIN 13 //
#define Y_STOP_PIN 14 // Misc. Functions
#define Z_STOP_PIN 15 //
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define SDSS 8 #define SDSS 8
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#if ENABLED(LCD_I2C_PANELOLU2) #if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 27 //RX1 - fastio.h pin mapping 27 #define BTN_EN1 27 // RX1 - fastio.h pin mapping 27
#define BTN_EN2 26 //TX1 - fastio.h pin mapping 26 #define BTN_EN2 26 // TX1 - fastio.h pin mapping 26
#define BTN_ENC 43 //A3 - fastio.h pin mapping 43 #define BTN_ENC 43 // A3 - fastio.h pin mapping 43
#define SDSS 40 //use SD card on Panelolu2 (Teensyduino pin mapping) #define SDSS 40 // use SD card on Panelolu2 (Teensyduino pin mapping)
#endif // LCD_I2C_PANELOLU2 #endif // LCD_I2C_PANELOLU2
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1

14
Marlin/pins_ULTIMAIN_2.h
View file

@ -65,16 +65,16 @@
#define MOTOR_CURRENT_PWM_XY_PIN 44 #define MOTOR_CURRENT_PWM_XY_PIN 44
#define MOTOR_CURRENT_PWM_Z_PIN 45 #define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 46 #define MOTOR_CURRENT_PWM_E_PIN 46
//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#define MOTOR_CURRENT_PWM_RANGE 2000 #define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 8 #define TEMP_0_PIN 8 // Analog Input
#define TEMP_1_PIN 9 #define TEMP_1_PIN 9 // Analog Input
#define TEMP_BED_PIN 10 #define TEMP_BED_PIN 10 // Analog Input
// //
// Heaters / Fans // Heaters / Fans
@ -86,15 +86,17 @@
#define FAN_PIN 7 #define FAN_PIN 7
// //
// SD Card // Misc. Functions
// //
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN 39 #define SD_DETECT_PIN 39
#define LED_PIN 8 #define LED_PIN 8
#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered #define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider. #define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
//
// LCD / Controller
//
#define BEEPER_PIN 18 #define BEEPER_PIN 18
#define LCD_PINS_RS 20 #define LCD_PINS_RS 20

20
Marlin/pins_ULTIMAKER.h
View file

@ -82,9 +82,9 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 8 #define TEMP_0_PIN 8 // Analog Input
#define TEMP_1_PIN 9 #define TEMP_1_PIN 9 // Analog Input
#define TEMP_BED_PIN 10 #define TEMP_BED_PIN 10 // Analog Input
// //
// Heaters / Fans // Heaters / Fans
@ -93,11 +93,15 @@
#define HEATER_1_PIN 3 #define HEATER_1_PIN 3
#define HEATER_BED_PIN 4 #define HEATER_BED_PIN 4
#define FAN_PIN 7
//
// Misc. Functions
//
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 7
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing. #define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing.
// //
// LCD / Controller // LCD / Controller
@ -115,16 +119,16 @@
#define LCD_PINS_D6 5 #define LCD_PINS_D6 5
#define LCD_PINS_D7 6 #define LCD_PINS_D7 6
//buttons are directly attached // buttons are directly attached
#define BTN_EN1 40 #define BTN_EN1 40
#define BTN_EN2 42 #define BTN_EN2 42
#define BTN_ENC 19 #define BTN_ENC 19
#define SD_DETECT_PIN 38 #define SD_DETECT_PIN 38
#else //!NEWPANEL - Old style panel with shift register #else // !NEWPANEL - Old style panel with shift register
//buttons are attached to a shift register // buttons are attached to a shift register
#define SHIFT_CLK 38 #define SHIFT_CLK 38
#define SHIFT_LD 42 #define SHIFT_LD 42
#define SHIFT_OUT 40 #define SHIFT_OUT 40

4
Marlin/pins_ULTIMAKER_OLD.h
View file

@ -77,8 +77,8 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 8 #define TEMP_0_PIN 8 // Analog Input
#define TEMP_1_PIN 1 #define TEMP_1_PIN 1 // Analog Input
// //
// Heaters / Fans // Heaters / Fans