Prevent damage if DELTA_HEIGHT is incorrect
This commit is contained in:
Thomas Moore
Scott Lahteine
parent
419c8969a7
commit
f54e0fc90f
|
|
@ -1409,6 +1409,9 @@ bool get_target_extruder_from_command(const uint16_t code) {
|
|||
soft_endstop_max[axis] = base_max_pos(axis) + offs;
|
||||
}
|
||||
}
|
||||
#elif ENABLED(DELTA)
|
||||
soft_endstop_min[axis] = base_min_pos(axis) + (axis == Z_AXIS ? 0 : offs);
|
||||
soft_endstop_max[axis] = base_max_pos(axis) + offs;
|
||||
#else
|
||||
soft_endstop_min[axis] = base_min_pos(axis) + offs;
|
||||
soft_endstop_max[axis] = base_max_pos(axis) + offs;
|
||||
|
|
@ -1806,13 +1809,9 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
}
|
||||
#endif
|
||||
|
||||
float z_dest = LOGICAL_Z_POSITION(z_raise);
|
||||
float z_dest = z_raise;
|
||||
if (zprobe_zoffset < 0) z_dest -= zprobe_zoffset;
|
||||
|
||||
#if ENABLED(DELTA)
|
||||
z_dest -= home_offset[Z_AXIS]; // Account for delta height adjustment
|
||||
#endif
|
||||
|
||||
if (z_dest > current_position[Z_AXIS])
|
||||
do_blocking_move_to_z(z_dest);
|
||||
}
|
||||
|
|
@ -2106,7 +2105,7 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
safe_delay(BLTOUCH_DELAY);
|
||||
}
|
||||
|
||||
void set_bltouch_deployed(const bool deploy) {
|
||||
bool set_bltouch_deployed(const bool deploy) {
|
||||
if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered
|
||||
bltouch_command(BLTOUCH_RESET); // try to reset it.
|
||||
bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to
|
||||
|
|
@ -2118,6 +2117,7 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH);
|
||||
stop(); // punt!
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -2130,6 +2130,8 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
SERIAL_EOL();
|
||||
}
|
||||
#endif
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
#endif // BLTOUCH
|
||||
|
|
@ -2149,23 +2151,7 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
// Make room for probe
|
||||
do_probe_raise(_Z_CLEARANCE_DEPLOY_PROBE);
|
||||
|
||||
// When deploying make sure BLTOUCH is not already triggered
|
||||
#if ENABLED(BLTOUCH)
|
||||
if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered
|
||||
bltouch_command(BLTOUCH_RESET); // try to reset it.
|
||||
bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to
|
||||
bltouch_command(BLTOUCH_STOW); // clear the triggered condition.
|
||||
safe_delay(1500); // wait for internal self test to complete
|
||||
// measured completion time was 0.65 seconds
|
||||
// after reset, deploy & stow sequence
|
||||
if (TEST_BLTOUCH()) { // If it still claims to be triggered...
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH);
|
||||
stop(); // punt!
|
||||
return true;
|
||||
}
|
||||
}
|
||||
#elif ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY)
|
||||
#if ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY)
|
||||
#if ENABLED(Z_PROBE_SLED)
|
||||
#define _AUE_ARGS true, false, false
|
||||
#else
|
||||
|
|
@ -2236,14 +2222,14 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
return false;
|
||||
}
|
||||
|
||||
static void do_probe_move(float z, float fr_mm_m) {
|
||||
static bool do_probe_move(float z, float fr_mm_m) {
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS(">>> do_probe_move", current_position);
|
||||
#endif
|
||||
|
||||
// Deploy BLTouch at the start of any probe
|
||||
#if ENABLED(BLTOUCH)
|
||||
set_bltouch_deployed(true);
|
||||
if (set_bltouch_deployed(true)) return true;
|
||||
#endif
|
||||
|
||||
#if QUIET_PROBING
|
||||
|
|
@ -2251,15 +2237,24 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
#endif
|
||||
|
||||
// Move down until probe triggered
|
||||
do_blocking_move_to_z(LOGICAL_Z_POSITION(z), MMM_TO_MMS(fr_mm_m));
|
||||
do_blocking_move_to_z(z, MMM_TO_MMS(fr_mm_m));
|
||||
|
||||
// Check to see if the probe was triggered
|
||||
const bool probe_triggered = TEST(Endstops::endstop_hit_bits,
|
||||
#ifdef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
Z_MIN
|
||||
#else
|
||||
Z_MIN_PROBE
|
||||
#endif
|
||||
);
|
||||
|
||||
#if QUIET_PROBING
|
||||
probing_pause(false);
|
||||
#endif
|
||||
|
||||
// Retract BLTouch immediately after a probe
|
||||
// Retract BLTouch immediately after a probe if it was triggered
|
||||
#if ENABLED(BLTOUCH)
|
||||
set_bltouch_deployed(false);
|
||||
if (probe_triggered && set_bltouch_deployed(false)) return true;
|
||||
#endif
|
||||
|
||||
// Clear endstop flags
|
||||
|
|
@ -2274,11 +2269,13 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< do_probe_move", current_position);
|
||||
#endif
|
||||
|
||||
return !probe_triggered;
|
||||
}
|
||||
|
||||
// Do a single Z probe and return with current_position[Z_AXIS]
|
||||
// at the height where the probe triggered.
|
||||
static float run_z_probe() {
|
||||
static float run_z_probe(bool printable=true) {
|
||||
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS(">>> run_z_probe", current_position);
|
||||
|
|
@ -2290,34 +2287,33 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
#if ENABLED(PROBE_DOUBLE_TOUCH)
|
||||
|
||||
// Do a first probe at the fast speed
|
||||
do_probe_move(-(Z_MAX_LENGTH) - 10, Z_PROBE_SPEED_FAST);
|
||||
if (do_probe_move(-10, Z_PROBE_SPEED_FAST)) return NAN;
|
||||
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
float first_probe_z = current_position[Z_AXIS];
|
||||
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("1st Probe Z:", first_probe_z);
|
||||
#endif
|
||||
|
||||
// move up by the bump distance
|
||||
do_blocking_move_to_z(current_position[Z_AXIS] + home_bump_mm(Z_AXIS), MMM_TO_MMS(Z_PROBE_SPEED_FAST));
|
||||
// move up to make clearance for the probe
|
||||
do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
|
||||
|
||||
#else
|
||||
|
||||
// If the nozzle is above the travel height then
|
||||
// move down quickly before doing the slow probe
|
||||
float z = LOGICAL_Z_POSITION(Z_CLEARANCE_BETWEEN_PROBES);
|
||||
float z = Z_CLEARANCE_DEPLOY_PROBE;
|
||||
if (zprobe_zoffset < 0) z -= zprobe_zoffset;
|
||||
|
||||
#if ENABLED(DELTA)
|
||||
z -= home_offset[Z_AXIS]; // Account for delta height adjustment
|
||||
#endif
|
||||
|
||||
if (z < current_position[Z_AXIS])
|
||||
do_blocking_move_to_z(z, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
|
||||
if (z < current_position[Z_AXIS]) {
|
||||
|
||||
// If we don't make it to the z position (i.e. the probe triggered), move up to make clearance for the probe
|
||||
if (!do_probe_move(z, Z_PROBE_SPEED_FAST))
|
||||
do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
|
||||
}
|
||||
#endif
|
||||
|
||||
// move down slowly to find bed
|
||||
do_probe_move(-(Z_MAX_LENGTH) - 10, Z_PROBE_SPEED_SLOW);
|
||||
if (do_probe_move(-10 + (printable ? 0 : -(Z_MAX_LENGTH)), Z_PROBE_SPEED_SLOW)) return NAN;
|
||||
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< run_z_probe", current_position);
|
||||
|
|
@ -2330,6 +2326,7 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - current_position[Z_AXIS]);
|
||||
}
|
||||
#endif
|
||||
|
||||
return RAW_CURRENT_POSITION(Z) + zprobe_zoffset
|
||||
#if ENABLED(DELTA)
|
||||
+ home_offset[Z_AXIS] // Account for delta height adjustment
|
||||
|
|
@ -2371,22 +2368,31 @@ static void clean_up_after_endstop_or_probe_move() {
|
|||
do_blocking_move_to_z(delta_clip_start_height);
|
||||
#endif
|
||||
|
||||
// Ensure a minimum height before moving the probe
|
||||
do_probe_raise(Z_CLEARANCE_BETWEEN_PROBES);
|
||||
#if HAS_SOFTWARE_ENDSTOPS
|
||||
// Store the status of the soft endstops and disable if we're probing a non-printable location
|
||||
static bool enable_soft_endstops = soft_endstops_enabled;
|
||||
if (!printable) soft_endstops_enabled = false;
|
||||
#endif
|
||||
|
||||
feedrate_mm_s = XY_PROBE_FEEDRATE_MM_S;
|
||||
|
||||
// Move the probe to the given XY
|
||||
do_blocking_move_to_xy(nx, ny);
|
||||
|
||||
if (DEPLOY_PROBE()) return NAN;
|
||||
float measured_z = NAN;
|
||||
if (!DEPLOY_PROBE()) {
|
||||
measured_z = run_z_probe(printable);
|
||||
|
||||
const float measured_z = run_z_probe();
|
||||
if (!stow)
|
||||
do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST));
|
||||
else
|
||||
if (STOW_PROBE()) measured_z = NAN;
|
||||
}
|
||||
|
||||
if (!stow)
|
||||
do_probe_raise(Z_CLEARANCE_BETWEEN_PROBES);
|
||||
else
|
||||
if (STOW_PROBE()) return NAN;
|
||||
#if HAS_SOFTWARE_ENDSTOPS
|
||||
// Restore the soft endstop status
|
||||
soft_endstops_enabled = enable_soft_endstops;
|
||||
#endif
|
||||
|
||||
if (verbose_level > 2) {
|
||||
SERIAL_PROTOCOLPGM("Bed X: ");
|
||||
|
|
@ -3752,7 +3758,7 @@ inline void gcode_G4() {
|
|||
* A delta can only safely home all axes at the same time
|
||||
* This is like quick_home_xy() but for 3 towers.
|
||||
*/
|
||||
inline void home_delta() {
|
||||
inline bool home_delta() {
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS(">>> home_delta", current_position);
|
||||
#endif
|
||||
|
|
@ -3761,10 +3767,23 @@ inline void gcode_G4() {
|
|||
sync_plan_position();
|
||||
|
||||
// Move all carriages together linearly until an endstop is hit.
|
||||
current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (Z_MAX_LENGTH + 10);
|
||||
current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (DELTA_HEIGHT + home_offset[Z_AXIS] + 10);
|
||||
feedrate_mm_s = homing_feedrate(X_AXIS);
|
||||
line_to_current_position();
|
||||
stepper.synchronize();
|
||||
|
||||
// If an endstop was not hit, then damage can occur if homing is continued.
|
||||
// This can occur if the delta height (DELTA_HEIGHT + home_offset[Z_AXIS]) is
|
||||
// not set correctly.
|
||||
if (!(TEST(Endstops::endstop_hit_bits, X_MAX) ||
|
||||
TEST(Endstops::endstop_hit_bits, Y_MAX) ||
|
||||
TEST(Endstops::endstop_hit_bits, Z_MAX))) {
|
||||
LCD_MESSAGEPGM(MSG_ERR_HOMING_FAILED);
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_ERR_HOMING_FAILED);
|
||||
return false;
|
||||
}
|
||||
|
||||
endstops.hit_on_purpose(); // clear endstop hit flags
|
||||
|
||||
// At least one carriage has reached the top.
|
||||
|
|
@ -3784,6 +3803,8 @@ inline void gcode_G4() {
|
|||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< home_delta", current_position);
|
||||
#endif
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
#endif // DELTA
|
||||
|
|
@ -4105,6 +4126,20 @@ void home_all_axes() { gcode_G28(true); }
|
|||
|
||||
#endif
|
||||
|
||||
#if HAS_BED_PROBE
|
||||
|
||||
static bool nan_error(const float v) {
|
||||
const bool is_nan = isnan(v);
|
||||
if (is_nan) {
|
||||
LCD_MESSAGEPGM(MSG_ERR_PROBING_FAILED);
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_ERR_PROBING_FAILED);
|
||||
}
|
||||
return is_nan;
|
||||
}
|
||||
|
||||
#endif // HAS_BED_PROBE
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING)
|
||||
|
||||
// Save 130 bytes with non-duplication of PSTR
|
||||
|
|
@ -4648,7 +4683,7 @@ void home_all_axes() { gcode_G28(true); }
|
|||
// Deploy the probe. Probe will raise if needed.
|
||||
if (DEPLOY_PROBE()) {
|
||||
planner.abl_enabled = abl_should_enable;
|
||||
return;
|
||||
goto FAIL;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
@ -4864,7 +4899,7 @@ void home_all_axes() { gcode_G28(true); }
|
|||
#endif // AUTO_BED_LEVELING_3POINT
|
||||
|
||||
#else // !PROBE_MANUALLY
|
||||
|
||||
{
|
||||
const bool stow_probe_after_each = parser.boolval('E');
|
||||
|
||||
#if ABL_GRID
|
||||
|
|
@ -4909,9 +4944,9 @@ void home_all_axes() { gcode_G28(true); }
|
|||
|
||||
measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
|
||||
|
||||
if (isnan(measured_z)) {
|
||||
if (nan_error(measured_z)) {
|
||||
planner.abl_enabled = abl_should_enable;
|
||||
return;
|
||||
goto FAIL;
|
||||
}
|
||||
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR)
|
||||
|
|
@ -4945,9 +4980,9 @@ void home_all_axes() { gcode_G28(true); }
|
|||
xProbe = LOGICAL_X_POSITION(points[i].x);
|
||||
yProbe = LOGICAL_Y_POSITION(points[i].y);
|
||||
measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
|
||||
if (isnan(measured_z)) {
|
||||
if (nan_error(measured_z)) {
|
||||
planner.abl_enabled = abl_should_enable;
|
||||
return;
|
||||
goto FAIL;
|
||||
}
|
||||
points[i].z = measured_z;
|
||||
}
|
||||
|
|
@ -4970,9 +5005,9 @@ void home_all_axes() { gcode_G28(true); }
|
|||
// Raise to _Z_CLEARANCE_DEPLOY_PROBE. Stow the probe.
|
||||
if (STOW_PROBE()) {
|
||||
planner.abl_enabled = abl_should_enable;
|
||||
return;
|
||||
goto FAIL;
|
||||
}
|
||||
|
||||
}
|
||||
#endif // !PROBE_MANUALLY
|
||||
|
||||
//
|
||||
|
|
@ -4985,9 +5020,6 @@ void home_all_axes() { gcode_G28(true); }
|
|||
// return or loop before this point.
|
||||
//
|
||||
|
||||
// Restore state after probing
|
||||
if (!faux) clean_up_after_endstop_or_probe_move();
|
||||
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("> probing complete", current_position);
|
||||
#endif
|
||||
|
|
@ -5192,6 +5224,14 @@ void home_all_axes() { gcode_G28(true); }
|
|||
stepper.synchronize();
|
||||
#endif
|
||||
|
||||
// Auto Bed Leveling is complete! Enable if possible.
|
||||
planner.abl_enabled = dryrun ? abl_should_enable : true;
|
||||
|
||||
FAIL:
|
||||
|
||||
// Restore state after probing
|
||||
if (!faux) clean_up_after_endstop_or_probe_move();
|
||||
|
||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< gcode_G29");
|
||||
#endif
|
||||
|
|
@ -5200,9 +5240,6 @@ void home_all_axes() { gcode_G28(true); }
|
|||
|
||||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
|
||||
// Auto Bed Leveling is complete! Enable if possible.
|
||||
planner.abl_enabled = dryrun ? abl_should_enable : true;
|
||||
|
||||
if (planner.abl_enabled)
|
||||
SYNC_PLAN_POSITION_KINEMATIC();
|
||||
}
|
||||
|
|
@ -5235,7 +5272,7 @@ void home_all_axes() { gcode_G28(true); }
|
|||
|
||||
const float measured_z = probe_pt(xpos, ypos, parser.boolval('S', true), 1);
|
||||
|
||||
if (!isnan(measured_z)) {
|
||||
if (!nan_error(measured_z)) {
|
||||
SERIAL_PROTOCOLPAIR("Bed X: ", FIXFLOAT(xpos));
|
||||
SERIAL_PROTOCOLPAIR(" Y: ", FIXFLOAT(ypos));
|
||||
SERIAL_PROTOCOLLNPAIR(" Z: ", FIXFLOAT(measured_z));
|
||||
|
|
@ -5399,9 +5436,9 @@ void home_all_axes() { gcode_G28(true); }
|
|||
tool_change(0, 0, true);
|
||||
#endif
|
||||
setup_for_endstop_or_probe_move();
|
||||
DEPLOY_PROBE();
|
||||
endstops.enable(true);
|
||||
home_delta();
|
||||
if (!home_delta())
|
||||
return;
|
||||
endstops.not_homing();
|
||||
|
||||
// print settings
|
||||
|
|
@ -5415,7 +5452,11 @@ void home_all_axes() { gcode_G28(true); }
|
|||
print_G33_settings(!_1p_calibration, _7p_calibration && towers_set);
|
||||
|
||||
#if DISABLED(PROBE_MANUALLY)
|
||||
home_offset[Z_AXIS] -= probe_pt(dx, dy, stow_after_each, 1, false); // 1st probe to set height
|
||||
const float measured_z = probe_pt(dx, dy, stow_after_each, 1, false); // 1st probe to set height
|
||||
if (nan_error(measured_z))
|
||||
goto FAIL;
|
||||
else
|
||||
home_offset[Z_AXIS] -= measured_z;
|
||||
#endif
|
||||
|
||||
do {
|
||||
|
|
@ -5433,6 +5474,7 @@ void home_all_axes() { gcode_G28(true); }
|
|||
z_at_pt[0] += lcd_probe_pt(0, 0);
|
||||
#else
|
||||
z_at_pt[0] += probe_pt(dx, dy, stow_after_each, 1, false);
|
||||
if (nan_error(z_at_pt[0])) goto FAIL;
|
||||
#endif
|
||||
}
|
||||
if (_7p_calibration) { // probe extra center points
|
||||
|
|
@ -5441,7 +5483,8 @@ void home_all_axes() { gcode_G28(true); }
|
|||
#if ENABLED(PROBE_MANUALLY)
|
||||
z_at_pt[0] += lcd_probe_pt(cos(a) * r, sin(a) * r);
|
||||
#else
|
||||
z_at_pt[0] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1, false);
|
||||
z_at_pt[0] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1);
|
||||
if (nan_error(z_at_pt[0])) goto FAIL;
|
||||
#endif
|
||||
}
|
||||
z_at_pt[0] /= float(_7p_double_circle ? 7 : probe_points);
|
||||
|
|
@ -5461,7 +5504,8 @@ void home_all_axes() { gcode_G28(true); }
|
|||
#if ENABLED(PROBE_MANUALLY)
|
||||
z_at_pt[axis] += lcd_probe_pt(cos(a) * r, sin(a) * r);
|
||||
#else
|
||||
z_at_pt[axis] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1, false);
|
||||
z_at_pt[axis] += probe_pt(cos(a) * r + dx, sin(a) * r + dy, stow_after_each, 1);
|
||||
if (nan_error(z_at_pt[axis])) goto FAIL;
|
||||
#endif
|
||||
}
|
||||
zig_zag = !zig_zag;
|
||||
|
|
@ -5661,6 +5705,8 @@ void home_all_axes() { gcode_G28(true); }
|
|||
}
|
||||
while ((zero_std_dev < test_precision && zero_std_dev > calibration_precision && iterations < 31) || iterations <= force_iterations);
|
||||
|
||||
FAIL:
|
||||
|
||||
#if ENABLED(DELTA_HOME_TO_SAFE_ZONE)
|
||||
do_blocking_move_to_z(delta_clip_start_height);
|
||||
#endif
|
||||
|
|
@ -6979,14 +7025,14 @@ inline void gcode_M42() {
|
|||
|
||||
setup_for_endstop_or_probe_move();
|
||||
|
||||
double mean = 0.0, sigma = 0.0, min = 99999.9, max = -99999.9, sample_set[n_samples];
|
||||
|
||||
// Move to the first point, deploy, and probe
|
||||
const float t = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, verbose_level);
|
||||
if (isnan(t)) return;
|
||||
if (nan_error(t)) goto FAIL;
|
||||
|
||||
randomSeed(millis());
|
||||
|
||||
double mean = 0.0, sigma = 0.0, min = 99999.9, max = -99999.9, sample_set[n_samples];
|
||||
|
||||
for (uint8_t n = 0; n < n_samples; n++) {
|
||||
if (n_legs) {
|
||||
const int dir = (random(0, 10) > 5.0) ? -1 : 1; // clockwise or counter clockwise
|
||||
|
|
@ -7058,6 +7104,7 @@ inline void gcode_M42() {
|
|||
|
||||
// Probe a single point
|
||||
sample_set[n] = probe_pt(X_probe_location, Y_probe_location, stow_probe_after_each, 0);
|
||||
if (nan_error(sample_set[n])) goto FAIL;
|
||||
|
||||
/**
|
||||
* Get the current mean for the data points we have so far
|
||||
|
|
@ -7103,7 +7150,7 @@ inline void gcode_M42() {
|
|||
|
||||
} // End of probe loop
|
||||
|
||||
if (STOW_PROBE()) return;
|
||||
if (STOW_PROBE()) goto FAIL;
|
||||
|
||||
SERIAL_PROTOCOLPGM("Finished!");
|
||||
SERIAL_EOL();
|
||||
|
|
@ -7125,6 +7172,8 @@ inline void gcode_M42() {
|
|||
SERIAL_EOL();
|
||||
SERIAL_EOL();
|
||||
|
||||
FAIL:
|
||||
|
||||
clean_up_after_endstop_or_probe_move();
|
||||
|
||||
// Re-enable bed level correction if it had been on
|
||||
|
|
@ -11452,19 +11501,22 @@ void ok_to_send() {
|
|||
// DELTA_PRINTABLE_RADIUS from center of bed, but delta
|
||||
// now enforces is_position_reachable for X/Y regardless
|
||||
// of HAS_SOFTWARE_ENDSTOPS, so that enforcement would be
|
||||
// redundant here. Probably should #ifdef out the X/Y
|
||||
// axis clamps here for delta and just leave the Z clamp.
|
||||
// redundant here.
|
||||
|
||||
void clamp_to_software_endstops(float target[XYZ]) {
|
||||
if (!soft_endstops_enabled) return;
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS)
|
||||
NOLESS(target[X_AXIS], soft_endstop_min[X_AXIS]);
|
||||
NOLESS(target[Y_AXIS], soft_endstop_min[Y_AXIS]);
|
||||
#if DISABLED(DELTA)
|
||||
NOLESS(target[X_AXIS], soft_endstop_min[X_AXIS]);
|
||||
NOLESS(target[Y_AXIS], soft_endstop_min[Y_AXIS]);
|
||||
#endif
|
||||
NOLESS(target[Z_AXIS], soft_endstop_min[Z_AXIS]);
|
||||
#endif
|
||||
#if ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
NOMORE(target[X_AXIS], soft_endstop_max[X_AXIS]);
|
||||
NOMORE(target[Y_AXIS], soft_endstop_max[Y_AXIS]);
|
||||
#if DISABLED(DELTA)
|
||||
NOMORE(target[X_AXIS], soft_endstop_max[X_AXIS]);
|
||||
NOMORE(target[Y_AXIS], soft_endstop_max[Y_AXIS]);
|
||||
#endif
|
||||
NOMORE(target[Z_AXIS], soft_endstop_max[Z_AXIS]);
|
||||
#endif
|
||||
}
|
||||
|
|
|
|||
|
|
@ -247,7 +247,7 @@ void Endstops::update() {
|
|||
#define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
|
||||
#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
|
||||
#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
|
||||
#define _ENDSTOP_HIT(AXIS) SBI(endstop_hit_bits, _ENDSTOP(AXIS, MIN))
|
||||
#define _ENDSTOP_HIT(AXIS, MINMAX) SBI(endstop_hit_bits, _ENDSTOP(AXIS, MINMAX))
|
||||
|
||||
// UPDATE_ENDSTOP_BIT: set the current endstop bits for an endstop to its status
|
||||
#define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT(current_endstop_bits, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
|
||||
|
|
@ -257,7 +257,7 @@ void Endstops::update() {
|
|||
#define UPDATE_ENDSTOP(AXIS,MINMAX) do { \
|
||||
UPDATE_ENDSTOP_BIT(AXIS, MINMAX); \
|
||||
if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX)) && stepper.current_block->steps[_AXIS(AXIS)] > 0) { \
|
||||
_ENDSTOP_HIT(AXIS); \
|
||||
_ENDSTOP_HIT(AXIS, MINMAX); \
|
||||
stepper.endstop_triggered(_AXIS(AXIS)); \
|
||||
} \
|
||||
} while(0)
|
||||
|
|
@ -267,9 +267,9 @@ void Endstops::update() {
|
|||
if (G38_move) {
|
||||
UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
|
||||
if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) {
|
||||
if (stepper.current_block->steps[_AXIS(X)] > 0) { _ENDSTOP_HIT(X); stepper.endstop_triggered(_AXIS(X)); }
|
||||
else if (stepper.current_block->steps[_AXIS(Y)] > 0) { _ENDSTOP_HIT(Y); stepper.endstop_triggered(_AXIS(Y)); }
|
||||
else if (stepper.current_block->steps[_AXIS(Z)] > 0) { _ENDSTOP_HIT(Z); stepper.endstop_triggered(_AXIS(Z)); }
|
||||
if (stepper.current_block->steps[_AXIS(X)] > 0) { _ENDSTOP_HIT(X, MIN); stepper.endstop_triggered(_AXIS(X)); }
|
||||
else if (stepper.current_block->steps[_AXIS(Y)] > 0) { _ENDSTOP_HIT(Y, MIN); stepper.endstop_triggered(_AXIS(Y)); }
|
||||
else if (stepper.current_block->steps[_AXIS(Z)] > 0) { _ENDSTOP_HIT(Z, MIN); stepper.endstop_triggered(_AXIS(Z)); }
|
||||
G38_endstop_hit = true;
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -717,7 +717,7 @@
|
|||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center")
|
||||
#endif
|
||||
#ifndef MSG_DELTA_SETTINGS
|
||||
#define MSG_DELTA_SETTINGS _UxGT("Show Delta Settings")
|
||||
#define MSG_DELTA_SETTINGS _UxGT("Delta Settings")
|
||||
#endif
|
||||
#ifndef MSG_DELTA_AUTO_CALIBRATE
|
||||
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration")
|
||||
|
|
@ -725,6 +725,15 @@
|
|||
#ifndef MSG_DELTA_HEIGHT_CALIBRATE
|
||||
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height")
|
||||
#endif
|
||||
#ifndef MSG_DELTA_DIAG_ROG
|
||||
#define MSG_DELTA_DIAG_ROG _UxGT("Diag Rod")
|
||||
#endif
|
||||
#ifndef MSG_DELTA_HEIGHT
|
||||
#define MSG_DELTA_HEIGHT _UxGT("Height")
|
||||
#endif
|
||||
#ifndef MSG_DELTA_RADIUS
|
||||
#define MSG_DELTA_RADIUS _UxGT("Radius")
|
||||
#endif
|
||||
#ifndef MSG_INFO_MENU
|
||||
#define MSG_INFO_MENU _UxGT("About Printer")
|
||||
#endif
|
||||
|
|
@ -840,6 +849,12 @@
|
|||
#ifndef MSG_FILAMENT_CHANGE_NOZZLE
|
||||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ")
|
||||
#endif
|
||||
#ifndef MSG_ERR_HOMING_FAILED
|
||||
#define MSG_ERR_HOMING_FAILED _UxGT("Homing failed")
|
||||
#endif
|
||||
#ifndef MSG_ERR_PROBING_FAILED
|
||||
#define MSG_ERR_PROBING_FAILED _UxGT("Probing failed")
|
||||
#endif
|
||||
|
||||
//
|
||||
// Filament Change screens show up to 3 lines on a 4-line display
|
||||
|
|
|
|||
|
|
@ -2537,15 +2537,23 @@ void kill_screen(const char* lcd_msg) {
|
|||
void _goto_tower_z() { _man_probe_pt(cos(RADIANS( 90)) * delta_calibration_radius, sin(RADIANS( 90)) * delta_calibration_radius); }
|
||||
void _goto_center() { _man_probe_pt(0,0); }
|
||||
|
||||
void lcd_delta_G33_settings() {
|
||||
static float _delta_height = DELTA_HEIGHT;
|
||||
void _lcd_set_delta_height() {
|
||||
home_offset[Z_AXIS] = _delta_height - DELTA_HEIGHT;
|
||||
update_software_endstops(Z_AXIS);
|
||||
}
|
||||
|
||||
void lcd_delta_settings() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_DELTA_CALIBRATE);
|
||||
float delta_height = DELTA_HEIGHT + home_offset[Z_AXIS], Tz = 0.00;
|
||||
MENU_ITEM_EDIT(float52, "Height", &delta_height, delta_height, delta_height);
|
||||
float Tz = 0.00;
|
||||
MENU_ITEM_EDIT(float52, MSG_DELTA_DIAG_ROG, &delta_diagonal_rod, DELTA_DIAGONAL_ROD - 5.0, DELTA_DIAGONAL_ROD + 5.0);
|
||||
_delta_height = DELTA_HEIGHT + home_offset[Z_AXIS];
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_HEIGHT, &_delta_height, _delta_height - 10.0, _delta_height + 10.0, _lcd_set_delta_height);
|
||||
MENU_ITEM_EDIT(float43, "Ex", &endstop_adj[A_AXIS], -5.0, 5.0);
|
||||
MENU_ITEM_EDIT(float43, "Ey", &endstop_adj[B_AXIS], -5.0, 5.0);
|
||||
MENU_ITEM_EDIT(float43, "Ez", &endstop_adj[C_AXIS], -5.0, 5.0);
|
||||
MENU_ITEM_EDIT(float52, "Radius", &delta_radius, DELTA_RADIUS - 5.0, DELTA_RADIUS + 5.0);
|
||||
MENU_ITEM_EDIT(float52, MSG_DELTA_RADIUS, &delta_radius, DELTA_RADIUS - 5.0, DELTA_RADIUS + 5.0);
|
||||
MENU_ITEM_EDIT(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0);
|
||||
MENU_ITEM_EDIT(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0);
|
||||
MENU_ITEM_EDIT(float43, "Tz", &Tz, -5.0, 5.0);
|
||||
|
|
@ -2556,7 +2564,7 @@ void kill_screen(const char* lcd_msg) {
|
|||
START_MENU();
|
||||
MENU_BACK(MSG_MAIN);
|
||||
#if ENABLED(DELTA_AUTO_CALIBRATION)
|
||||
MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_G33_settings);
|
||||
MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_settings);
|
||||
MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33"));
|
||||
MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1"));
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
|
|
|
|||
Loading…
Reference in a new issue