SKR Pro 1.1 WiFi and LCD SD card support (#17531)
This commit is contained in:
Bob Kuhn
GitHub
parent
d194688020
commit
f5d809f366
35
Marlin/src/HAL/shared/esp_wifi.cpp
Normal file
35
Marlin/src/HAL/shared/esp_wifi.cpp
Normal file
|
|
@ -0,0 +1,35 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
#include "Delay.h"
|
||||
|
||||
void esp_wifi_init(void) {
|
||||
#if PIN_EXISTS(ESP_WIFI_MODULE_RESET)
|
||||
OUT_WRITE(ESP_WIFI_MODULE_RESET_PIN, LOW);
|
||||
delay(1);
|
||||
OUT_WRITE(ESP_WIFI_MODULE_RESET_PIN, HIGH);
|
||||
#endif
|
||||
#if PIN_EXISTS(ESP_WIFI_MODULE_ENABLE)
|
||||
OUT_WRITE(ESP_WIFI_MODULE_ENABLE_PIN, HIGH);
|
||||
#endif
|
||||
}
|
||||
24
Marlin/src/HAL/shared/esp_wifi.h
Normal file
24
Marlin/src/HAL/shared/esp_wifi.h
Normal file
|
|
@ -0,0 +1,24 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
void esp_wifi_init();
|
||||
|
|
@ -44,6 +44,7 @@
|
|||
#include "feature/closedloop.h"
|
||||
|
||||
#include "HAL/shared/Delay.h"
|
||||
#include "HAL/shared/esp_wifi.h"
|
||||
|
||||
#include "module/stepper/indirection.h"
|
||||
|
||||
|
|
@ -962,6 +963,8 @@ void setup() {
|
|||
BOARD_INIT();
|
||||
#endif
|
||||
|
||||
SETUP_RUN(esp_wifi_init());
|
||||
|
||||
// Check startup - does nothing if bootloader sets MCUSR to 0
|
||||
byte mcu = HAL_get_reset_source();
|
||||
if (mcu & 1) SERIAL_ECHOLNPGM(STR_POWERUP);
|
||||
|
|
|
|||
|
|
@ -1409,3 +1409,9 @@
|
|||
#if PIN_EXISTS(CLOSED_LOOP_MOVE_COMPLETE)
|
||||
REPORT_NAME_DIGITAL(__LINE__, CLOSED_LOOP_MOVE_COMPLETE_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(ESP_WIFI_MODULE_RESET)
|
||||
REPORT_NAME_DIGITAL(__LINE__, ESP_WIFI_MODULE_RESET_PIN)
|
||||
#endif
|
||||
#if PIN_EXISTS(ESP_WIFI_MODULE_ENABLE)
|
||||
REPORT_NAME_DIGITAL(__LINE__, ESP_WIFI_MODULE_ENABLE_PIN)
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -142,7 +142,11 @@
|
|||
#define SDIO_CK_PIN PC12
|
||||
#define SDIO_CMD_PIN PD2
|
||||
|
||||
#if !defined(SDCARD_CONNECTION) || SD_CONNECTION_IS(ONBOARD)
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
|
||||
#if SD_CONNECTION_IS(ONBOARD)
|
||||
#define SDIO_SUPPORT // Use SDIO for onboard SD
|
||||
|
||||
#ifndef SDIO_SUPPORT
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@
|
|||
|
||||
// Use one of these or SDCard-based Emulation will be used
|
||||
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
|
||||
//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
|
||||
#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
|
||||
|
||||
//
|
||||
// Servos
|
||||
|
|
@ -215,7 +215,11 @@
|
|||
#define HEATER_BED_PIN PD12 // Hotbed
|
||||
#define FAN_PIN PC8 // Fan0
|
||||
#define FAN1_PIN PE5 // Fan1
|
||||
#define FAN2_PIN PE6 // Fan2
|
||||
#define FAN2_PIN PE6
|
||||
|
||||
#ifndef E0_AUTO_FAN_PIN
|
||||
#define E0_AUTO_FAN_PIN PC9
|
||||
#endif
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
|
|
@ -227,16 +231,14 @@
|
|||
|
||||
//
|
||||
// Onboard SD card
|
||||
// NOT compatible with LCD
|
||||
// Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2
|
||||
//
|
||||
#if SDCARD_CONNECTION == ONBOARD && !HAS_SPI_LCD
|
||||
#if SD_CONNECTION_IS(ONBOARD)
|
||||
#define SOFTWARE_SPI // Use soft SPI for onboard SD
|
||||
#define SDSS PA4
|
||||
#define SCK_PIN PA5
|
||||
#define MISO_PIN PA6
|
||||
#define MOSI_PIN PB5
|
||||
#else
|
||||
#define SDSS PB12
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -256,6 +258,9 @@
|
|||
#if HAS_SPI_LCD
|
||||
#define BEEPER_PIN PG4
|
||||
#define BTN_ENC PA8
|
||||
#if SD_CONNECTION_IS(LCD)
|
||||
#define SDSS PB12 // Uses default hardware SPI for LCD's SD
|
||||
#endif
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
#define LCD_PINS_RS PG6
|
||||
|
|
@ -272,6 +277,10 @@
|
|||
#undef ST7920_DELAY_2
|
||||
#undef ST7920_DELAY_3
|
||||
|
||||
#elif ENABLED(MKS_MINI_12864)
|
||||
#define DOGLCD_A0 PG6
|
||||
#define DOGLCD_CS PG3
|
||||
|
||||
#else
|
||||
|
||||
#define LCD_PINS_RS PD10
|
||||
|
|
@ -321,3 +330,21 @@
|
|||
#endif
|
||||
|
||||
#endif // HAS_SPI_LCD
|
||||
|
||||
//
|
||||
// WIFI
|
||||
//
|
||||
|
||||
/**
|
||||
* _____
|
||||
* TX | 1 2 | GND Enable PG1 // Must be high for module to run
|
||||
* Enable | 3 4 | GPIO2 Reset PG0 // Leave as unused (OK to leave floating)
|
||||
* Reset | 5 6 | GPIO0 GPIO2 PF15 // Leave as unused (best to leave floating)
|
||||
* 3.3V| 7 8 | RX GPIO0 PF14 // Leave as unused (best to leave floating)
|
||||
* ￣￣
|
||||
* W1
|
||||
*/
|
||||
#define ESP_WIFI_MODULE_COM 6 // must also set SERIAL_PORT or SERIAL_PORT_2 to this
|
||||
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE //115200 // use BAUDRATE ? would guarantee same baud rate as SERIAL_PORT & SERIAL_PORT_2
|
||||
#define ESP_WIFI_MODULE_RESET_PIN -1
|
||||
#define ESP_WIFI_MODULE_ENABLE_PIN PG1
|
||||
|
|
|
|||
|
|
@ -164,7 +164,11 @@
|
|||
#define SDIO_CK_PIN PC12
|
||||
#define SDIO_CMD_PIN PD2
|
||||
|
||||
#if !defined(SDCARD_CONNECTION) || SD_CONNECTION_IS(ONBOARD)
|
||||
#ifndef SDCARD_CONNECTION
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
|
||||
#if SD_CONNECTION_IS(ONBOARD)
|
||||
#define SDIO_SUPPORT // Use SDIO for onboard SD
|
||||
|
||||
#ifndef SDIO_SUPPORT
|
||||
|
|
|
|||
Loading…
Reference in a new issue