diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index 1e1199c5bc..03210f03d0 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -181,11 +181,15 @@
   #include "libs/L6470/L6470_Marlin.h"
 #endif
 
-const char G28_STR[] PROGMEM = "G28",
+const char NUL_STR[] PROGMEM = "",
+           G28_STR[] PROGMEM = "G28",
            M21_STR[] PROGMEM = "M21",
            M23_STR[] PROGMEM = "M23 %s",
            M24_STR[] PROGMEM = "M24",
-           NUL_STR[] PROGMEM = "";
+           SP_X_STR[] PROGMEM = " X",
+           SP_Y_STR[] PROGMEM = " Y",
+           SP_Z_STR[] PROGMEM = " Z",
+           SP_E_STR[] PROGMEM = " E";
 
 bool Running = true;
 
diff --git a/Marlin/src/Marlin.h b/Marlin/src/Marlin.h
index b15ca3d5cb..8b44298a91 100644
--- a/Marlin/src/Marlin.h
+++ b/Marlin/src/Marlin.h
@@ -377,4 +377,5 @@ void protected_pin_err();
   void event_probe_failure();
 #endif
 
-extern const char G28_STR[], M21_STR[], M23_STR[], M24_STR[], NUL_STR[];
+extern const char NUL_STR[], G28_STR[], M21_STR[], M23_STR[], M24_STR[],
+                  SP_X_STR[], SP_Y_STR[], SP_Z_STR[], SP_E_STR[];
diff --git a/Marlin/src/core/serial.cpp b/Marlin/src/core/serial.cpp
index 2369c3acbf..4a5214f5c0 100644
--- a/Marlin/src/core/serial.cpp
+++ b/Marlin/src/core/serial.cpp
@@ -67,8 +67,10 @@ void print_bin(const uint16_t val) {
   }
 }
 
+extern const char SP_X_STR[], SP_Y_STR[], SP_Z_STR[];
+
 void print_xyz(const float &x, const float &y, const float &z, PGM_P const prefix/*=nullptr*/, PGM_P const suffix/*=nullptr*/) {
   serialprintPGM(prefix);
-  SERIAL_ECHOPAIR(" " MSG_X, x, " " MSG_Y, y, " " MSG_Z, z);
+  SERIAL_ECHOPAIR_P(SP_X_STR, x, SP_Y_STR, y, SP_Z_STR, z);
   if (suffix) serialprintPGM(suffix); else SERIAL_EOL();
 }
diff --git a/Marlin/src/core/serial.h b/Marlin/src/core/serial.h
index f4c2570ca7..0db7bb9e4e 100644
--- a/Marlin/src/core/serial.h
+++ b/Marlin/src/core/serial.h
@@ -83,7 +83,7 @@ extern uint8_t marlin_debug_flags;
   #define SERIAL_FLUSHTX()
 #endif
 
-// Print up to 12 pairs of values
+// Print up to 12 pairs of values. Odd elements auto-wrapped in PSTR().
 #define __SEP_N(N,V...)   _SEP_##N(V)
 #define _SEP_N(N,V...)    __SEP_N(N,V)
 #define _SEP_1(PRE)       SERIAL_ECHOPGM(PRE)
@@ -113,6 +113,36 @@ extern uint8_t marlin_debug_flags;
 
 #define SERIAL_ECHOPAIR(V...) _SEP_N(NUM_ARGS(V),V)
 
+// Print up to 12 pairs of values. Odd elements must be PSTR pointers.
+#define __SEP_N_P(N,V...)   _SEP_##N##_P(V)
+#define _SEP_N_P(N,V...)    __SEP_N_P(N,V)
+#define _SEP_1_P(PRE)       serialprintPGM(PRE)
+#define _SEP_2_P(PRE,V)     serial_echopair_PGM(PRE,V)
+#define _SEP_3_P(a,b,c)     do{ _SEP_2_P(a,b); serialprintPGM(c); }while(0)
+#define _SEP_4_P(a,b,V...)  do{ _SEP_2_P(a,b); _SEP_2_P(V); }while(0)
+#define _SEP_5_P(a,b,V...)  do{ _SEP_2_P(a,b); _SEP_3_P(V); }while(0)
+#define _SEP_6_P(a,b,V...)  do{ _SEP_2_P(a,b); _SEP_4_P(V); }while(0)
+#define _SEP_7_P(a,b,V...)  do{ _SEP_2_P(a,b); _SEP_5_P(V); }while(0)
+#define _SEP_8_P(a,b,V...)  do{ _SEP_2_P(a,b); _SEP_6_P(V); }while(0)
+#define _SEP_9_P(a,b,V...)  do{ _SEP_2_P(a,b); _SEP_7_P(V); }while(0)
+#define _SEP_10_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_8_P(V); }while(0)
+#define _SEP_11_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_9_P(V); }while(0)
+#define _SEP_12_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_10_P(V); }while(0)
+#define _SEP_13_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_11_P(V); }while(0)
+#define _SEP_14_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_12_P(V); }while(0)
+#define _SEP_15_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_13_P(V); }while(0)
+#define _SEP_16_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_14_P(V); }while(0)
+#define _SEP_17_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_15_P(V); }while(0)
+#define _SEP_18_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_16_P(V); }while(0)
+#define _SEP_19_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_17_P(V); }while(0)
+#define _SEP_20_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_18_P(V); }while(0)
+#define _SEP_21_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_19_P(V); }while(0)
+#define _SEP_22_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_20_P(V); }while(0)
+#define _SEP_23_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_21_P(V); }while(0)
+#define _SEP_24_P(a,b,V...) do{ _SEP_2_P(a,b); _SEP_22_P(V); }while(0)
+
+#define SERIAL_ECHOPAIR_P(V...) _SEP_N_P(NUM_ARGS(V),V)
+
 // Print up to 12 pairs of values followed by newline
 #define __SELP_N(N,V...)   _SELP_##N(V)
 #define _SELP_N(N,V...)    __SELP_N(N,V)
@@ -139,10 +169,40 @@ extern uint8_t marlin_debug_flags;
 #define _SELP_21(a,b,V...) do{ _SEP_2(a,b); _SELP_19(V); }while(0)
 #define _SELP_22(a,b,V...) do{ _SEP_2(a,b); _SELP_20(V); }while(0)
 #define _SELP_23(a,b,V...) do{ _SEP_2(a,b); _SELP_21(V); }while(0)
-#define _SELP_24(a,b,V...) do{ _SEP_2(a,b); _SELP_22(V); }while(0) // Use up two, pass the rest up
+#define _SELP_24(a,b,V...) do{ _SEP_2(a,b); _SELP_22(V); }while(0) // Eat two args, pass the rest up
 
 #define SERIAL_ECHOLNPAIR(V...) _SELP_N(NUM_ARGS(V),V)
 
+// Print up to 12 pairs of values followed by newline
+#define __SELP_N_P(N,V...)   _SELP_##N##_P(V)
+#define _SELP_N_P(N,V...)    __SELP_N_P(N,V)
+#define _SELP_1_P(PRE)       serialprintPGM(PRE)
+#define _SELP_2_P(PRE,V)     do{ serial_echopair_PGM(PRE,V); SERIAL_EOL(); }while(0)
+#define _SELP_3_P(a,b,c)     do{ _SEP_2_P(a,b); serialprintPGM(c); }while(0)
+#define _SELP_4_P(a,b,V...)  do{ _SEP_2_P(a,b); _SELP_2_P(V); }while(0)
+#define _SELP_5_P(a,b,V...)  do{ _SEP_2_P(a,b); _SELP_3_P(V); }while(0)
+#define _SELP_6_P(a,b,V...)  do{ _SEP_2_P(a,b); _SELP_4_P(V); }while(0)
+#define _SELP_7_P(a,b,V...)  do{ _SEP_2_P(a,b); _SELP_5_P(V); }while(0)
+#define _SELP_8_P(a,b,V...)  do{ _SEP_2_P(a,b); _SELP_6_P(V); }while(0)
+#define _SELP_9_P(a,b,V...)  do{ _SEP_2_P(a,b); _SELP_7_P(V); }while(0)
+#define _SELP_10_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_8_P(V); }while(0)
+#define _SELP_11_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_9_P(V); }while(0)
+#define _SELP_12_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_10_P(V); }while(0)
+#define _SELP_13_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_11_P(V); }while(0)
+#define _SELP_14_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_12_P(V); }while(0)
+#define _SELP_15_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_13_P(V); }while(0)
+#define _SELP_16_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_14_P(V); }while(0)
+#define _SELP_17_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_15_P(V); }while(0)
+#define _SELP_18_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_16_P(V); }while(0)
+#define _SELP_19_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_17_P(V); }while(0)
+#define _SELP_20_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_18_P(V); }while(0)
+#define _SELP_21_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_19_P(V); }while(0)
+#define _SELP_22_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_20_P(V); }while(0)
+#define _SELP_23_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_21_P(V); }while(0)
+#define _SELP_24_P(a,b,V...) do{ _SEP_2_P(a,b); _SELP_22_P(V); }while(0) // Eat two args, pass the rest up
+
+#define SERIAL_ECHOLNPAIR_P(V...) _SELP_N_P(NUM_ARGS(V),V)
+
 // Print up to 20 comma-separated pairs of values
 #define __SLST_N(N,V...)   _SLST_##N(V)
 #define _SLST_N(N,V...)    __SLST_N(N,V)
@@ -165,15 +225,21 @@ extern uint8_t marlin_debug_flags;
 #define _SLST_17(a,b,V...) do{ SERIAL_ECHO(a); _SEP_2(", ",b); _SLST_15(V); }while(0)
 #define _SLST_18(a,b,V...) do{ SERIAL_ECHO(a); _SEP_2(", ",b); _SLST_16(V); }while(0)
 #define _SLST_19(a,b,V...) do{ SERIAL_ECHO(a); _SEP_2(", ",b); _SLST_17(V); }while(0)
-#define _SLST_20(a,b,V...) do{ SERIAL_ECHO(a); _SEP_2(", ",b); _SLST_18(V); }while(0) // Use up two, pass the rest up
+#define _SLST_20(a,b,V...) do{ SERIAL_ECHO(a); _SEP_2(", ",b); _SLST_18(V); }while(0) // Eat two args, pass the rest up
 
 #define SERIAL_ECHOLIST(pre,V...)   do{ SERIAL_ECHOPGM(pre); _SLST_N(NUM_ARGS(V),V); }while(0)
 #define SERIAL_ECHOLIST_N(N,V...)   _SLST_N(N,LIST_N(N,V))
 
+#define SERIAL_ECHOPGM_P(P)         (serialprintPGM(P))
+#define SERIAL_ECHOLNPGM_P(P)       (serialprintPGM(P "\n"))
+
 #define SERIAL_ECHOPGM(S)           (serialprintPGM(PSTR(S)))
 #define SERIAL_ECHOLNPGM(S)         (serialprintPGM(PSTR(S "\n")))
 
-#define SERIAL_ECHOPAIR_F(S,V...)   do{ SERIAL_ECHOPGM(S); SERIAL_ECHO_F(V); }while(0)
+#define SERIAL_ECHOPAIR_F_P(P,V...) do{ serialprintPGM(P); SERIAL_ECHO_F(V); }while(0)
+#define SERIAL_ECHOLNPAIR_F_P(V...) do{ SERIAL_ECHOPAIR_F_P(V); SERIAL_EOL(); }while(0)
+
+#define SERIAL_ECHOPAIR_F(S,V...)   SERIAL_ECHOPAIR_F_P(PSTR(S),V)
 #define SERIAL_ECHOLNPAIR_F(V...)   do{ SERIAL_ECHOPAIR_F(V); SERIAL_EOL(); }while(0)
 
 #define SERIAL_ECHO_START()         serial_echo_start()
diff --git a/Marlin/src/core/utility.cpp b/Marlin/src/core/utility.cpp
index ca8cd67ccf..189a505cc3 100644
--- a/Marlin/src/core/utility.cpp
+++ b/Marlin/src/core/utility.cpp
@@ -79,7 +79,7 @@ void safe_delay(millis_t ms) {
     );
 
     #if HAS_BED_PROBE
-      SERIAL_ECHOPAIR("Probe Offset X", probe_offset.x, " Y", probe_offset.y, " Z", probe_offset.z);
+      SERIAL_ECHOPAIR_P(PSTR("Probe Offset X"), probe_offset.x, SP_Y_STR, probe_offset.y, SP_Z_STR, probe_offset.z);
       if (probe_offset.x > 0)
         SERIAL_ECHOPGM(" (Right");
       else if (probe_offset.x < 0)
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.cpp b/Marlin/src/feature/bedlevel/ubl/ubl.cpp
index 259ee10966..66eff703c3 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl.cpp
@@ -51,7 +51,7 @@
         if (!isnan(z_values[x][y])) {
           SERIAL_ECHO_START();
           SERIAL_ECHOPAIR("  M421 I", int(x), " J", int(y));
-          SERIAL_ECHOLNPAIR_F(" Z", z_values[x][y], 4);
+          SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, z_values[x][y], 4);
           serial_delay(75); // Prevent Printrun from exploding
         }
   }
diff --git a/Marlin/src/feature/host_actions.cpp b/Marlin/src/feature/host_actions.cpp
index 4c36b76c7b..f40478b768 100644
--- a/Marlin/src/feature/host_actions.cpp
+++ b/Marlin/src/feature/host_actions.cpp
@@ -64,6 +64,8 @@ void host_action(const char * const pstr, const bool eol) {
 
 #if ENABLED(HOST_PROMPT_SUPPORT)
 
+  const char CONTINUE_STR[] PROGMEM = "Continue";
+
   #if HAS_RESUME_CONTINUE
     extern bool wait_for_user;
   #endif
@@ -126,7 +128,7 @@ void host_action(const char * const pstr, const bool eol) {
             host_action_prompt_button(PSTR("DisableRunout"));
           else {
             host_prompt_reason = PROMPT_FILAMENT_RUNOUT;
-            host_action_prompt_button(PSTR("Continue"));
+            host_action_prompt_button(CONTINUE_STR);
           }
           host_action_prompt_show();
         }
diff --git a/Marlin/src/feature/host_actions.h b/Marlin/src/feature/host_actions.h
index 7477b6e6df..b742d0f081 100644
--- a/Marlin/src/feature/host_actions.h
+++ b/Marlin/src/feature/host_actions.h
@@ -46,6 +46,8 @@ void host_action(const char * const pstr, const bool eol=true);
 
 #if ENABLED(HOST_PROMPT_SUPPORT)
 
+  extern const char CONTINUE_STR[];
+
   enum PromptReason : uint8_t {
     PROMPT_NOT_DEFINED,
     PROMPT_FILAMENT_RUNOUT,
diff --git a/Marlin/src/feature/joystick.cpp b/Marlin/src/feature/joystick.cpp
index 404d5406d0..abfd77f438 100644
--- a/Marlin/src/feature/joystick.cpp
+++ b/Marlin/src/feature/joystick.cpp
@@ -54,13 +54,13 @@ Joystick joystick;
   void Joystick::report() {
     SERIAL_ECHOPGM("Joystick");
     #if HAS_JOY_ADC_X
-      SERIAL_ECHOPAIR(" X", x.raw);
+      SERIAL_ECHOPAIR_P(SP_X_STR, x.raw);
     #endif
     #if HAS_JOY_ADC_Y
-      SERIAL_ECHOPAIR(" Y", y.raw);
+      SERIAL_ECHOPAIR_P(SP_Y_STR, y.raw);
     #endif
     #if HAS_JOY_ADC_Z
-      SERIAL_ECHOPAIR(" Z", z.raw);
+      SERIAL_ECHOPAIR_P(SP_Z_STR, z.raw);
     #endif
     #if HAS_JOY_ADC_EN
       SERIAL_ECHO_TERNARY(READ(JOY_EN_PIN), " EN=", "HIGH (dis", "LOW (en", "abled)");
diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp
index 47722c87e3..ce6c5a6261 100644
--- a/Marlin/src/feature/pause.cpp
+++ b/Marlin/src/feature/pause.cpp
@@ -191,7 +191,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
       host_action_prompt_begin(PSTR("Load Filament T"), false);
       SERIAL_CHAR(tool);
       SERIAL_EOL();
-      host_action_prompt_button(PSTR("Continue"));
+      host_action_prompt_button(CONTINUE_STR);
       host_action_prompt_show();
     #endif
     #if ENABLED(EXTENSIBLE_UI)
@@ -247,7 +247,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
 
     wait_for_user = true;
     #if ENABLED(HOST_PROMPT_SUPPORT)
-      host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Filament Purge Running..."), PSTR("Continue"));
+      host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Filament Purge Running..."), CONTINUE_STR);
     #endif
     #if ENABLED(EXTENSIBLE_UI)
       ExtUI::onUserConfirmRequired_P(PSTR("Filament Purge Running..."));
@@ -283,7 +283,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
           host_action_prompt_button(PSTR("DisableRunout"));
         else {
           host_prompt_reason = PROMPT_FILAMENT_RUNOUT;
-          host_action_prompt_button(PSTR("Continue"));
+          host_action_prompt_button(CONTINUE_STR);
         }
         host_action_prompt_show();
       #endif
@@ -523,7 +523,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
   KEEPALIVE_STATE(PAUSED_FOR_USER);
   wait_for_user = true;    // LCD click or M108 will clear this
   #if ENABLED(HOST_PROMPT_SUPPORT)
-    host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Nozzle Parked"), PSTR("Continue"));
+    host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Nozzle Parked"), CONTINUE_STR);
   #endif
   #if ENABLED(EXTENSIBLE_UI)
     ExtUI::onUserConfirmRequired_P(PSTR("Nozzle Parked"));
@@ -577,7 +577,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
 
       HOTEND_LOOP() thermalManager.hotend_idle[e].start(nozzle_timeout);
       #if ENABLED(HOST_PROMPT_SUPPORT)
-        host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Reheat Done"), PSTR("Continue"));
+        host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Reheat Done"), CONTINUE_STR);
       #endif
       #if ENABLED(EXTENSIBLE_UI)
         ExtUI::onUserConfirmRequired_P(PSTR("Reheat finished."));
diff --git a/Marlin/src/feature/prusa_MMU2/mmu2.cpp b/Marlin/src/feature/prusa_MMU2/mmu2.cpp
index d101cf7f93..2fdd6c09c5 100644
--- a/Marlin/src/feature/prusa_MMU2/mmu2.cpp
+++ b/Marlin/src/feature/prusa_MMU2/mmu2.cpp
@@ -709,7 +709,7 @@ void MMU2::filament_runout() {
       BUZZ(200, 404);
       wait_for_user = true;
       #if ENABLED(HOST_PROMPT_SUPPORT)
-        host_prompt_do(PROMPT_USER_CONTINUE, PSTR("MMU2 Eject Recover"), PSTR("Continue"));
+        host_prompt_do(PROMPT_USER_CONTINUE, PSTR("MMU2 Eject Recover"), CONTINUE_STR);
       #endif
       #if ENABLED(EXTENSIBLE_UI)
         ExtUI::onUserConfirmRequired_P(PSTR("MMU2 Eject Recover"));
diff --git a/Marlin/src/gcode/bedlevel/abl/G29.cpp b/Marlin/src/gcode/bedlevel/abl/G29.cpp
index 1a9fa4bc7b..41e5fce4d2 100644
--- a/Marlin/src/gcode/bedlevel/abl/G29.cpp
+++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp
@@ -560,7 +560,7 @@ G29_TYPE GcodeSuite::G29() {
           ExtUI::onMeshUpdate(meshCount, newz);
         #endif
 
-        if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Save X", meshCount.x, " Y", meshCount.y, " Z", measured_z + zoffset);
+        if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR_P(PSTR("Save X"), meshCount.x, SP_Y_STR, meshCount.y, SP_Z_STR, measured_z + zoffset);
 
       #endif
     }
diff --git a/Marlin/src/gcode/calibrate/G34_M422.cpp b/Marlin/src/gcode/calibrate/G34_M422.cpp
index d74a9ce5da..704d370c4f 100644
--- a/Marlin/src/gcode/calibrate/G34_M422.cpp
+++ b/Marlin/src/gcode/calibrate/G34_M422.cpp
@@ -362,10 +362,10 @@ void GcodeSuite::G34() {
 void GcodeSuite::M422() {
   if (!parser.seen_any()) {
     for (uint8_t i = 0; i < G34_PROBE_COUNT; ++i)
-      SERIAL_ECHOLNPAIR("M422 S", i + 1, " X", z_auto_align_pos[i].x, " Y", z_auto_align_pos[i].y);
+      SERIAL_ECHOLNPAIR_P(PSTR("M422 S"), i + 1, SP_X_STR, z_auto_align_pos[i].x, SP_Y_STR, z_auto_align_pos[i].y);
     #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
       for (uint8_t i = 0; i < Z_STEPPER_COUNT; ++i)
-        SERIAL_ECHOLNPAIR("M422 W", i + 1, " X", z_stepper_pos[i].x, " Y", z_stepper_pos[i].y);
+        SERIAL_ECHOLNPAIR_P(PSTR("M422 W"), i + 1, SP_X_STR, z_stepper_pos[i].x, SP_Y_STR, z_stepper_pos[i].y);
     #endif
     return;
   }
diff --git a/Marlin/src/gcode/calibrate/G425.cpp b/Marlin/src/gcode/calibrate/G425.cpp
index 2b2c16657d..d251e89f8a 100644
--- a/Marlin/src/gcode/calibrate/G425.cpp
+++ b/Marlin/src/gcode/calibrate/G425.cpp
@@ -326,12 +326,12 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
   inline void report_measured_center(const measurements_t &m) {
     SERIAL_ECHOLNPGM("Center:");
     #if HAS_X_CENTER
-      SERIAL_ECHOLNPAIR(" X", m.obj_center.x);
+      SERIAL_ECHOLNPAIR_P(SP_X_STR, m.obj_center.x);
     #endif
     #if HAS_Y_CENTER
-      SERIAL_ECHOLNPAIR(" Y", m.obj_center.y);
+      SERIAL_ECHOLNPAIR_P(SP_Y_STR, m.obj_center.y);
     #endif
-    SERIAL_ECHOLNPAIR(" Z", m.obj_center.z);
+    SERIAL_ECHOLNPAIR_P(SP_Z_STR, m.obj_center.z);
     SERIAL_EOL();
   }
 
@@ -358,12 +358,12 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
     SERIAL_ECHO(int(active_extruder));
     SERIAL_ECHOLNPGM(" Positional Error:");
     #if HAS_X_CENTER
-      SERIAL_ECHOLNPAIR(" X", m.pos_error.x);
+      SERIAL_ECHOLNPAIR_P(SP_X_STR, m.pos_error.x);
     #endif
     #if HAS_Y_CENTER
-      SERIAL_ECHOLNPAIR(" Y", m.pos_error.y);
+      SERIAL_ECHOLNPAIR_P(SP_Y_STR, m.pos_error.y);
     #endif
-    SERIAL_ECHOLNPAIR(" Z", m.pos_error.z);
+    SERIAL_ECHOLNPAIR_P(SP_Z_STR, m.pos_error.z);
     SERIAL_EOL();
   }
 
@@ -371,10 +371,10 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
     SERIAL_ECHOLNPGM("Nozzle Tip Outer Dimensions:");
     #if HAS_X_CENTER || HAS_Y_CENTER
       #if HAS_X_CENTER
-        SERIAL_ECHOLNPAIR(" X", m.nozzle_outer_dimension.x);
+        SERIAL_ECHOLNPAIR_P(SP_X_STR, m.nozzle_outer_dimension.x);
       #endif
       #if HAS_Y_CENTER
-        SERIAL_ECHOLNPAIR(" Y", m.nozzle_outer_dimension.y);
+        SERIAL_ECHOLNPAIR_P(SP_Y_STR, m.nozzle_outer_dimension.y);
       #endif
     #else
       UNUSED(m);
@@ -388,7 +388,7 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
     //
     inline void report_hotend_offsets() {
       for (uint8_t e = 1; e < HOTENDS; e++)
-        SERIAL_ECHOLNPAIR("T", int(e), " Hotend Offset X", hotend_offset[e].x, " Y", hotend_offset[e].y, " Z", hotend_offset[e].z);
+        SERIAL_ECHOLNPAIR_P(PSTR("T"), int(e), PSTR(" Hotend Offset X"), hotend_offset[e].x, SP_Y_STR, hotend_offset[e].y, SP_Z_STR, hotend_offset[e].z);
     }
   #endif
 
diff --git a/Marlin/src/gcode/calibrate/M48.cpp b/Marlin/src/gcode/calibrate/M48.cpp
index ca30110670..86b25d8240 100644
--- a/Marlin/src/gcode/calibrate/M48.cpp
+++ b/Marlin/src/gcode/calibrate/M48.cpp
@@ -178,12 +178,12 @@ void GcodeSuite::M48() {
             while (!position_is_reachable_by_probe(next_pos)) {
               next_pos *= 0.8f;
               if (verbose_level > 3)
-                SERIAL_ECHOLNPAIR("Moving inward: X", next_pos.x, " Y", next_pos.y);
+                SERIAL_ECHOLNPAIR_P(PSTR("Moving inward: X"), next_pos.x, SP_Y_STR, next_pos.y);
             }
           #endif
 
           if (verbose_level > 3)
-            SERIAL_ECHOLNPAIR("Going to: X", next_pos.x, " Y", next_pos.y);
+            SERIAL_ECHOLNPAIR_P(PSTR("Going to: X"), next_pos.x, SP_Y_STR, next_pos.y);
 
           do_blocking_move_to_xy(next_pos);
         } // n_legs loop
diff --git a/Marlin/src/gcode/config/M217.cpp b/Marlin/src/gcode/config/M217.cpp
index ade8c280f7..3fe3feb0de 100644
--- a/Marlin/src/gcode/config/M217.cpp
+++ b/Marlin/src/gcode/config/M217.cpp
@@ -27,18 +27,22 @@
 #include "../gcode.h"
 #include "../../module/tool_change.h"
 
+#include "../../Marlin.h" // for SP_X_STR, etc.
+
+extern const char SP_X_STR[], SP_Y_STR[], SP_Z_STR[];
+
 void M217_report(const bool eeprom=false) {
 
   #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
     serialprintPGM(eeprom ? PSTR("  M217") : PSTR("Toolchange:"));
     SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length));
-    SERIAL_ECHOPAIR(" E", LINEAR_UNIT(toolchange_settings.extra_prime));
+    SERIAL_ECHOPAIR_P(SP_E_STR, LINEAR_UNIT(toolchange_settings.extra_prime));
     SERIAL_ECHOPAIR(" P", LINEAR_UNIT(toolchange_settings.prime_speed));
     SERIAL_ECHOPAIR(" R", LINEAR_UNIT(toolchange_settings.retract_speed));
 
     #if ENABLED(TOOLCHANGE_PARK)
-      SERIAL_ECHOPAIR(" X", LINEAR_UNIT(toolchange_settings.change_point.x));
-      SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(toolchange_settings.change_point.y));
+      SERIAL_ECHOPAIR_P(SP_X_STR, LINEAR_UNIT(toolchange_settings.change_point.x));
+      SERIAL_ECHOPAIR_P(SP_Y_STR, LINEAR_UNIT(toolchange_settings.change_point.y));
     #endif
 
   #else
@@ -47,7 +51,7 @@ void M217_report(const bool eeprom=false) {
 
   #endif
 
-  SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(toolchange_settings.z_raise));
+  SERIAL_ECHOPAIR_P(SP_Z_STR, LINEAR_UNIT(toolchange_settings.z_raise));
   SERIAL_EOL();
 }
 
diff --git a/Marlin/src/gcode/config/M43.cpp b/Marlin/src/gcode/config/M43.cpp
index 0fd213886d..29fc0bdff1 100644
--- a/Marlin/src/gcode/config/M43.cpp
+++ b/Marlin/src/gcode/config/M43.cpp
@@ -331,7 +331,7 @@ void GcodeSuite::M43() {
       KEEPALIVE_STATE(PAUSED_FOR_USER);
       wait_for_user = true;
       #if ENABLED(HOST_PROMPT_SUPPORT)
-        host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M43 Wait Called"), PSTR("Continue"));
+        host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M43 Wait Called"), CONTINUE_STR);
       #endif
       #if ENABLED(EXTENSIBLE_UI)
         ExtUI::onUserConfirmRequired_P(PSTR("M43 Wait Called"));
diff --git a/Marlin/src/gcode/config/M92.cpp b/Marlin/src/gcode/config/M92.cpp
index 8a98f4c5e0..212b6f83b7 100644
--- a/Marlin/src/gcode/config/M92.cpp
+++ b/Marlin/src/gcode/config/M92.cpp
@@ -25,11 +25,11 @@
 
 void report_M92(const bool echo=true, const int8_t e=-1) {
   if (echo) SERIAL_ECHO_START(); else SERIAL_CHAR(' ');
-  SERIAL_ECHOPAIR(" M92 X", LINEAR_UNIT(planner.settings.axis_steps_per_mm[X_AXIS]),
-                  " Y", LINEAR_UNIT(planner.settings.axis_steps_per_mm[Y_AXIS]),
-                  " Z", LINEAR_UNIT(planner.settings.axis_steps_per_mm[Z_AXIS]));
+  SERIAL_ECHOPAIR_P(PSTR(" M92 X"), LINEAR_UNIT(planner.settings.axis_steps_per_mm[X_AXIS]),
+                          SP_Y_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Y_AXIS]),
+                          SP_Z_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Z_AXIS]));
   #if DISABLED(DISTINCT_E_FACTORS)
-    SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS]));
+    SERIAL_ECHOPAIR_P(SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS]));
   #endif
   SERIAL_EOL();
 
@@ -37,8 +37,8 @@ void report_M92(const bool echo=true, const int8_t e=-1) {
     for (uint8_t i = 0; i < E_STEPPERS; i++) {
       if (e >= 0 && i != e) continue;
       if (echo) SERIAL_ECHO_START(); else SERIAL_CHAR(' ');
-      SERIAL_ECHOLNPAIR(" M92 T", (int)i,
-                        " E", VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS_N(i)]));
+      SERIAL_ECHOLNPAIR_P(PSTR(" M92 T"), (int)i,
+                        SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS_N(i)]));
     }
   #endif
 
diff --git a/Marlin/src/gcode/feature/mixing/M166.cpp b/Marlin/src/gcode/feature/mixing/M166.cpp
index 8b74182cde..cb3541eb8f 100644
--- a/Marlin/src/gcode/feature/mixing/M166.cpp
+++ b/Marlin/src/gcode/feature/mixing/M166.cpp
@@ -35,7 +35,7 @@ inline void echo_mix() {
 
 inline void echo_zt(const int t, const float &z) {
   mixer.update_mix_from_vtool(t);
-  SERIAL_ECHOPAIR(" Z", z, " T", t);
+  SERIAL_ECHOPAIR_P(SP_Z_STR, z, PSTR(" T"), t);
   echo_mix();
 }
 
diff --git a/Marlin/src/gcode/lcd/M0_M1.cpp b/Marlin/src/gcode/lcd/M0_M1.cpp
index 42129edce8..5bf9e94325 100644
--- a/Marlin/src/gcode/lcd/M0_M1.cpp
+++ b/Marlin/src/gcode/lcd/M0_M1.cpp
@@ -98,7 +98,7 @@ void GcodeSuite::M0_M1() {
   wait_for_user = true;
 
   #if ENABLED(HOST_PROMPT_SUPPORT)
-    host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M0/1 Break Called"), PSTR("Continue"));
+    host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M0/1 Break Called"), CONTINUE_STR);
   #endif
 
   if (ms > 0) {
diff --git a/Marlin/src/gcode/motion/M290.cpp b/Marlin/src/gcode/motion/M290.cpp
index 895060fcf1..31411a0698 100644
--- a/Marlin/src/gcode/motion/M290.cpp
+++ b/Marlin/src/gcode/motion/M290.cpp
@@ -103,12 +103,17 @@ void GcodeSuite::M290() {
 
     #if ENABLED(BABYSTEP_HOTEND_Z_OFFSET)
     {
-      SERIAL_ECHOLNPAIR("Hotend ", int(active_extruder), "Offset"
+      #error "Hey!"
+      SERIAL_ECHOLNPAIR_P(
+        PSTR("Hotend "), int(active_extruder)
         #if ENABLED(BABYSTEP_XY)
-          " X", hotend_offset[active_extruder].x,
-          " Y", hotend_offset[active_extruder].y,
+          , PSTR("Offset X"), hotend_offset[active_extruder].x
+          , SP_Y_STR, hotend_offset[active_extruder].y
+          , SP_Z_STR
+        #else
+          , PSTR("Offset Z")
         #endif
-        " Z", hotend_offset[active_extruder].z
+        , hotend_offset[active_extruder].z
       );
     }
     #endif
@@ -119,12 +124,15 @@ void GcodeSuite::M290() {
 
     #if ENABLED(BABYSTEP_DISPLAY_TOTAL)
     {
-      SERIAL_ECHOLNPAIR("Babystep"
+      SERIAL_ECHOLNPAIR_P(
         #if ENABLED(BABYSTEP_XY)
-          " X", babystep.axis_total[X_AXIS],
-          " Y", babystep.axis_total[Y_AXIS],
+            PSTR("Babystep X"), babystep.axis_total[X_AXIS]
+          , SP_Y_STR, babystep.axis_total[Y_AXIS]
+          , SP_Z_STR
+        #else
+          , PSTR("Babystep Z")
         #endif
-        " Z", babystep.axis_total[BS_TODO_AXIS(Z_AXIS)]
+        , babystep.axis_total[BS_TODO_AXIS(Z_AXIS)]
       );
     }
     #endif
diff --git a/Marlin/src/gcode/probe/M851.cpp b/Marlin/src/gcode/probe/M851.cpp
index 19f96eecd2..431fe6fa09 100644
--- a/Marlin/src/gcode/probe/M851.cpp
+++ b/Marlin/src/gcode/probe/M851.cpp
@@ -28,6 +28,8 @@
 #include "../../feature/bedlevel/bedlevel.h"
 #include "../../module/probe.h"
 
+extern const char SP_Y_STR[], SP_Z_STR[];
+
 /**
  * M851: Set the nozzle-to-probe offsets in current units
  */
@@ -35,7 +37,7 @@ void GcodeSuite::M851() {
 
   // Show usage with no parameters
   if (!parser.seen("XYZ")) {
-    SERIAL_ECHOLNPAIR(MSG_PROBE_OFFSET " X", probe_offset.x, " Y", probe_offset.y, " Z", probe_offset.z);
+    SERIAL_ECHOLNPAIR_P(PSTR(MSG_PROBE_OFFSET " X"), probe_offset.x, SP_Y_STR, probe_offset.y, SP_Z_STR, probe_offset.z);
     return;
   }
 
diff --git a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
index 3a6aa711d3..75c427bafa 100644
--- a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
+++ b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
@@ -61,7 +61,7 @@ void _man_probe_pt(const xy_pos_t &xy) {
     ui.defer_status_screen();
     wait_for_user = true;
     #if ENABLED(HOST_PROMPT_SUPPORT)
-      host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Delta Calibration in progress"), PSTR("Continue"));
+      host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Delta Calibration in progress"), CONTINUE_STR);
     #endif
     #if ENABLED(EXTENSIBLE_UI)
       ExtUI::onUserConfirmRequired_P(PSTR("Delta Calibration in progress"));
diff --git a/Marlin/src/libs/vector_3.cpp b/Marlin/src/libs/vector_3.cpp
index f50fde5ed5..53057906cd 100644
--- a/Marlin/src/libs/vector_3.cpp
+++ b/Marlin/src/libs/vector_3.cpp
@@ -78,9 +78,9 @@ void vector_3::apply_rotation(const matrix_3x3 &matrix) {
 
 void vector_3::debug(PGM_P const title) {
   serialprintPGM(title);
-  SERIAL_ECHOPAIR_F(" X", x, 6);
-  SERIAL_ECHOPAIR_F(" Y", y, 6);
-  SERIAL_ECHOLNPAIR_F(" Z", z, 6);
+  SERIAL_ECHOPAIR_F_P(SP_X_STR, x, 6);
+  SERIAL_ECHOPAIR_F_P(SP_Y_STR, y, 6);
+  SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, z, 6);
 }
 
 /**
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index 80a7c4ffc6..fdd851c170 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -129,6 +129,8 @@ static const uint32_t   _DMA[] PROGMEM = DEFAULT_MAX_ACCELERATION;
 static const float     _DASU[] PROGMEM = DEFAULT_AXIS_STEPS_PER_UNIT;
 static const feedRate_t _DMF[] PROGMEM = DEFAULT_MAX_FEEDRATE;
 
+extern const char SP_X_STR[], SP_Y_STR[], SP_Z_STR[], SP_E_STR[];
+
 /**
  * Current EEPROM Layout
  *
@@ -2728,40 +2730,40 @@ void MarlinSettings::reset() {
 
     CONFIG_ECHO_HEADING("Maximum feedrates (units/s):");
     CONFIG_ECHO_START();
-    SERIAL_ECHOLNPAIR(
-        "  M203 X", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS])
-      , " Y", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS])
-      , " Z", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS])
+    SERIAL_ECHOLNPAIR_P(
+        PSTR("  M203 X"), LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS])
+      , SP_Y_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS])
+      , SP_Z_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS])
       #if DISABLED(DISTINCT_E_FACTORS)
-        , " E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS])
+        , SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS])
       #endif
     );
     #if ENABLED(DISTINCT_E_FACTORS)
       CONFIG_ECHO_START();
       for (uint8_t i = 0; i < E_STEPPERS; i++) {
-        SERIAL_ECHOLNPAIR(
-            "  M203 T", (int)i
-          , " E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)])
+        SERIAL_ECHOLNPAIR_P(
+            PSTR("  M203 T"), (int)i
+          , SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)])
         );
       }
     #endif
 
     CONFIG_ECHO_HEADING("Maximum Acceleration (units/s2):");
     CONFIG_ECHO_START();
-    SERIAL_ECHOLNPAIR(
-        "  M201 X", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS])
-      , " Y", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS])
-      , " Z", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS])
+    SERIAL_ECHOLNPAIR_P(
+        PSTR("  M201 X"), LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS])
+      , SP_Y_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS])
+      , SP_Z_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS])
       #if DISABLED(DISTINCT_E_FACTORS)
-        , " E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS])
+        , SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS])
       #endif
     );
     #if ENABLED(DISTINCT_E_FACTORS)
       CONFIG_ECHO_START();
       for (uint8_t i = 0; i < E_STEPPERS; i++)
-        SERIAL_ECHOLNPAIR(
-            "  M201 T", (int)i
-          , " E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)])
+        SERIAL_ECHOLNPAIR_P(
+            PSTR("  M201 T"), (int)i
+          , SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)])
         );
     #endif
 
@@ -2788,19 +2790,19 @@ void MarlinSettings::reset() {
       SERIAL_EOL();
     }
     CONFIG_ECHO_START();
-    SERIAL_ECHOLNPAIR(
-        "  M205 B", LINEAR_UNIT(planner.settings.min_segment_time_us)
-      , " S", LINEAR_UNIT(planner.settings.min_feedrate_mm_s)
-      , " T", LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s)
+    SERIAL_ECHOLNPAIR_P(
+        PSTR("  M205 B"), LINEAR_UNIT(planner.settings.min_segment_time_us)
+      , PSTR(" S"), LINEAR_UNIT(planner.settings.min_feedrate_mm_s)
+      , PSTR(" T"), LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s)
       #if DISABLED(CLASSIC_JERK)
-        , " J", LINEAR_UNIT(planner.junction_deviation_mm)
+        , PSTR(" J"), LINEAR_UNIT(planner.junction_deviation_mm)
       #endif
       #if HAS_CLASSIC_JERK
-        , " X", LINEAR_UNIT(planner.max_jerk.x)
-        , " Y", LINEAR_UNIT(planner.max_jerk.y)
-        , " Z", LINEAR_UNIT(planner.max_jerk.z)
+        , SP_X_STR, LINEAR_UNIT(planner.max_jerk.x)
+        , SP_Y_STR, LINEAR_UNIT(planner.max_jerk.y)
+        , SP_Z_STR, LINEAR_UNIT(planner.max_jerk.z)
         #if HAS_CLASSIC_E_JERK
-          , " E", LINEAR_UNIT(planner.max_jerk.e)
+          , SP_E_STR, LINEAR_UNIT(planner.max_jerk.e)
         #endif
       #endif
     );
@@ -2808,12 +2810,15 @@ void MarlinSettings::reset() {
     #if HAS_M206_COMMAND
       CONFIG_ECHO_HEADING("Home offset:");
       CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR("  M206"
+      SERIAL_ECHOLNPAIR_P(
         #if IS_CARTESIAN
-          " X", LINEAR_UNIT(home_offset.x),
-          " Y", LINEAR_UNIT(home_offset.y),
+            PSTR("  M206 X"), LINEAR_UNIT(home_offset.x)
+          , SP_Y_STR, LINEAR_UNIT(home_offset.y)
+          , SP_Z_STR
+        #else
+          PSTR("  M206 Z")
         #endif
-        " Z", LINEAR_UNIT(home_offset.z)
+        , LINEAR_UNIT(home_offset.z)
       );
     #endif
 
@@ -2821,11 +2826,12 @@ void MarlinSettings::reset() {
       CONFIG_ECHO_HEADING("Hotend offsets:");
       CONFIG_ECHO_START();
       for (uint8_t e = 1; e < HOTENDS; e++) {
-        SERIAL_ECHOPAIR(
-          "  M218 T", (int)e,
-          " X", LINEAR_UNIT(hotend_offset[e].x), " Y", LINEAR_UNIT(hotend_offset[e].y)
+        SERIAL_ECHOPAIR_P(
+          PSTR("  M218 T"), (int)e,
+          SP_X_STR, LINEAR_UNIT(hotend_offset[e].x),
+          SP_Y_STR, LINEAR_UNIT(hotend_offset[e].y)
         );
-        SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(hotend_offset[e].z), 3);
+        SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(hotend_offset[e].z), 3);
       }
     #endif
 
@@ -2853,10 +2859,10 @@ void MarlinSettings::reset() {
       #endif
 
       CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR(
-        "  M420 S", planner.leveling_active ? 1 : 0
+      SERIAL_ECHOLNPAIR_P(
+        PSTR("  M420 S"), planner.leveling_active ? 1 : 0
         #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-          , " Z", LINEAR_UNIT(planner.z_fade_height)
+          , SP_Z_STR, LINEAR_UNIT(planner.z_fade_height)
         #endif
       );
 
@@ -2866,8 +2872,8 @@ void MarlinSettings::reset() {
           for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
             for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
               CONFIG_ECHO_START();
-              SERIAL_ECHOPAIR("  G29 S3 X", (int)px + 1, " Y", (int)py + 1);
-              SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(mbl.z_values[px][py]), 5);
+              SERIAL_ECHOPAIR_P(PSTR("  G29 S3 X"), (int)px + 1, SP_Y_STR, (int)py + 1);
+              SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(mbl.z_values[px][py]), 5);
             }
           }
         }
@@ -2890,7 +2896,7 @@ void MarlinSettings::reset() {
             for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
               CONFIG_ECHO_START();
               SERIAL_ECHOPAIR("  G29 W I", (int)px, " J", (int)py);
-              SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(z_values[px][py]), 5);
+              SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(z_values[px][py]), 5);
             }
           }
         }
@@ -2926,33 +2932,33 @@ void MarlinSettings::reset() {
 
       CONFIG_ECHO_HEADING("SCARA settings: S<seg-per-sec> P<theta-psi-offset> T<theta-offset>");
       CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR(
-          "  M665 S", delta_segments_per_second
-        , " P", scara_home_offset.a
-        , " T", scara_home_offset.b
-        , " Z", LINEAR_UNIT(scara_home_offset.z)
+      SERIAL_ECHOLNPAIR_P(
+          PSTR("  M665 S"), delta_segments_per_second
+        , PSTR(" P"), scara_home_offset.a
+        , PSTR(" T"), scara_home_offset.b
+        , SP_Z_STR, LINEAR_UNIT(scara_home_offset.z)
       );
 
     #elif ENABLED(DELTA)
 
       CONFIG_ECHO_HEADING("Endstop adjustment:");
       CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR(
-          "  M666 X", LINEAR_UNIT(delta_endstop_adj.a)
-        , " Y", LINEAR_UNIT(delta_endstop_adj.b)
-        , " Z", LINEAR_UNIT(delta_endstop_adj.c)
+      SERIAL_ECHOLNPAIR_P(
+          PSTR("  M666 X"), LINEAR_UNIT(delta_endstop_adj.a)
+        , SP_Y_STR, LINEAR_UNIT(delta_endstop_adj.b)
+        , SP_Z_STR, LINEAR_UNIT(delta_endstop_adj.c)
       );
 
       CONFIG_ECHO_HEADING("Delta settings: L<diagonal_rod> R<radius> H<height> S<segments_per_s> XYZ<tower angle corrections>");
       CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR(
-          "  M665 L", LINEAR_UNIT(delta_diagonal_rod)
-        , " R", LINEAR_UNIT(delta_radius)
-        , " H", LINEAR_UNIT(delta_height)
-        , " S", delta_segments_per_second
-        , " X", LINEAR_UNIT(delta_tower_angle_trim.a)
-        , " Y", LINEAR_UNIT(delta_tower_angle_trim.b)
-        , " Z", LINEAR_UNIT(delta_tower_angle_trim.c)
+      SERIAL_ECHOLNPAIR_P(
+          PSTR("  M665 L"), LINEAR_UNIT(delta_diagonal_rod)
+        , PSTR(" R"), LINEAR_UNIT(delta_radius)
+        , PSTR(" H"), LINEAR_UNIT(delta_height)
+        , PSTR(" S"), delta_segments_per_second
+        , SP_X_STR, LINEAR_UNIT(delta_tower_angle_trim.a)
+        , SP_Y_STR, LINEAR_UNIT(delta_tower_angle_trim.b)
+        , SP_Z_STR, LINEAR_UNIT(delta_tower_angle_trim.c)
       );
 
     #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
@@ -2961,17 +2967,17 @@ void MarlinSettings::reset() {
       CONFIG_ECHO_START();
       SERIAL_ECHOPGM("  M666");
       #if ENABLED(X_DUAL_ENDSTOPS)
-        SERIAL_ECHOPAIR(" X", LINEAR_UNIT(endstops.x2_endstop_adj));
+        SERIAL_ECHOPAIR_P(SP_X_STR, LINEAR_UNIT(endstops.x2_endstop_adj));
       #endif
       #if ENABLED(Y_DUAL_ENDSTOPS)
-        SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(endstops.y2_endstop_adj));
+        SERIAL_ECHOPAIR_P(SP_Y_STR, LINEAR_UNIT(endstops.y2_endstop_adj));
       #endif
       #if ENABLED(Z_TRIPLE_ENDSTOPS)
         SERIAL_ECHOLNPAIR("S1 Z", LINEAR_UNIT(endstops.z2_endstop_adj));
         CONFIG_ECHO_START();
         SERIAL_ECHOPAIR("  M666 S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj));
       #elif ENABLED(Z_DUAL_ENDSTOPS)
-        SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(endstops.z2_endstop_adj));
+        SERIAL_ECHOPAIR_P(SP_Z_STR, LINEAR_UNIT(endstops.z2_endstop_adj));
       #endif
       SERIAL_EOL();
 
@@ -2999,13 +3005,16 @@ void MarlinSettings::reset() {
       #if ENABLED(PIDTEMP)
         HOTEND_LOOP() {
           CONFIG_ECHO_START();
-          SERIAL_ECHOPAIR("  M301"
+          SERIAL_ECHOPAIR_P(
             #if HOTENDS > 1 && ENABLED(PID_PARAMS_PER_HOTEND)
-              " E", e,
+              PSTR("  M301 E"), e,
+              PSTR(" P")
+            #else
+              PSTR("  M301 P")
             #endif
-              " P", PID_PARAM(Kp, e)
-            , " I", unscalePID_i(PID_PARAM(Ki, e))
-            , " D", unscalePID_d(PID_PARAM(Kd, e))
+                        , PID_PARAM(Kp, e)
+            , PSTR(" I"), unscalePID_i(PID_PARAM(Ki, e))
+            , PSTR(" D"), unscalePID_d(PID_PARAM(Kd, e))
           );
           #if ENABLED(PID_EXTRUSION_SCALING)
             SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, e));
@@ -3051,11 +3060,11 @@ void MarlinSettings::reset() {
 
       CONFIG_ECHO_HEADING("Retract: S<length> F<units/m> Z<lift>");
       CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR(
-          "  M207 S", LINEAR_UNIT(fwretract.settings.retract_length)
-        , " W", LINEAR_UNIT(fwretract.settings.swap_retract_length)
-        , " F", LINEAR_UNIT(MMS_TO_MMM(fwretract.settings.retract_feedrate_mm_s))
-        , " Z", LINEAR_UNIT(fwretract.settings.retract_zraise)
+      SERIAL_ECHOLNPAIR_P(
+          PSTR("  M207 S"), LINEAR_UNIT(fwretract.settings.retract_length)
+        , PSTR(" W"), LINEAR_UNIT(fwretract.settings.swap_retract_length)
+        , PSTR(" F"), LINEAR_UNIT(MMS_TO_MMM(fwretract.settings.retract_feedrate_mm_s))
+        , SP_Z_STR, LINEAR_UNIT(fwretract.settings.retract_zraise)
       );
 
       CONFIG_ECHO_HEADING("Recover: S<length> F<units/m>");
@@ -3086,9 +3095,9 @@ void MarlinSettings::reset() {
         say_units(true);
       }
       CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR("  M851 X", LINEAR_UNIT(probe_offset.x),
-                              " Y", LINEAR_UNIT(probe_offset.y),
-                              " Z", LINEAR_UNIT(probe_offset.z));
+      SERIAL_ECHOLNPAIR_P(PSTR("  M851 X"), LINEAR_UNIT(probe_offset.x),
+                                  SP_Y_STR, LINEAR_UNIT(probe_offset.y),
+                                  SP_Z_STR, LINEAR_UNIT(probe_offset.z));
     #endif
 
     /**
@@ -3115,15 +3124,15 @@ void MarlinSettings::reset() {
 
       #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
         say_M906(forReplay);
-        SERIAL_ECHOLNPAIR(
+        SERIAL_ECHOLNPAIR_P(
           #if AXIS_IS_TMC(X)
-            " X", stepperX.getMilliamps(),
+            SP_X_STR, stepperX.getMilliamps(),
           #endif
           #if AXIS_IS_TMC(Y)
-            " Y", stepperY.getMilliamps(),
+            SP_Y_STR, stepperY.getMilliamps(),
           #endif
           #if AXIS_IS_TMC(Z)
-            " Z", stepperZ.getMilliamps()
+            SP_Z_STR, stepperZ.getMilliamps()
           #endif
         );
       #endif
@@ -3131,15 +3140,15 @@ void MarlinSettings::reset() {
       #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
         say_M906(forReplay);
         SERIAL_ECHOPGM(" I1");
-        SERIAL_ECHOLNPAIR(
+        SERIAL_ECHOLNPAIR_P(
           #if AXIS_IS_TMC(X2)
-            " X", stepperX2.getMilliamps(),
+            SP_X_STR, stepperX2.getMilliamps(),
           #endif
           #if AXIS_IS_TMC(Y2)
-            " Y", stepperY2.getMilliamps(),
+            SP_Y_STR, stepperY2.getMilliamps(),
           #endif
           #if AXIS_IS_TMC(Z2)
-            " Z", stepperZ2.getMilliamps()
+            SP_Z_STR, stepperZ2.getMilliamps()
           #endif
         );
       #endif
@@ -3184,13 +3193,13 @@ void MarlinSettings::reset() {
           say_M913(forReplay);
         #endif
         #if AXIS_HAS_STEALTHCHOP(X)
-          SERIAL_ECHOPAIR(" X", stepperX.get_pwm_thrs());
+          SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(Y)
-          SERIAL_ECHOPAIR(" Y", stepperY.get_pwm_thrs());
+          SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(Z)
-          SERIAL_ECHOPAIR(" Z", stepperZ.get_pwm_thrs());
+          SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(X) || AXIS_HAS_STEALTHCHOP(Y) || AXIS_HAS_STEALTHCHOP(Z)
           SERIAL_EOL();
@@ -3201,13 +3210,13 @@ void MarlinSettings::reset() {
           SERIAL_ECHOPGM(" I1");
         #endif
         #if AXIS_HAS_STEALTHCHOP(X2)
-          SERIAL_ECHOPAIR(" X", stepperX2.get_pwm_thrs());
+          SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(Y2)
-          SERIAL_ECHOPAIR(" Y", stepperY2.get_pwm_thrs());
+          SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(Z2)
-          SERIAL_ECHOPAIR(" Z", stepperZ2.get_pwm_thrs());
+          SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(X2) || AXIS_HAS_STEALTHCHOP(Y2) || AXIS_HAS_STEALTHCHOP(Z2)
           SERIAL_EOL();
@@ -3254,13 +3263,13 @@ void MarlinSettings::reset() {
           CONFIG_ECHO_START();
           say_M914();
           #if X_SENSORLESS
-            SERIAL_ECHOPAIR(" X", stepperX.homing_threshold());
+            SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.homing_threshold());
           #endif
           #if Y_SENSORLESS
-            SERIAL_ECHOPAIR(" Y", stepperY.homing_threshold());
+            SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.homing_threshold());
           #endif
           #if Z_SENSORLESS
-            SERIAL_ECHOPAIR(" Z", stepperZ.homing_threshold());
+            SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.homing_threshold());
           #endif
           SERIAL_EOL();
         #endif
@@ -3270,13 +3279,13 @@ void MarlinSettings::reset() {
           say_M914();
           SERIAL_ECHOPGM(" I1");
           #if X2_SENSORLESS
-            SERIAL_ECHOPAIR(" X", stepperX2.homing_threshold());
+            SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.homing_threshold());
           #endif
           #if Y2_SENSORLESS
-            SERIAL_ECHOPAIR(" Y", stepperY2.homing_threshold());
+            SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.homing_threshold());
           #endif
           #if Z2_SENSORLESS
-            SERIAL_ECHOPAIR(" Z", stepperZ2.homing_threshold());
+            SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.homing_threshold());
           #endif
           SERIAL_EOL();
         #endif
@@ -3312,9 +3321,9 @@ void MarlinSettings::reset() {
 
         if (chop_x || chop_y || chop_z) {
           say_M569(forReplay);
-          if (chop_x) SERIAL_ECHOPGM(" X");
-          if (chop_y) SERIAL_ECHOPGM(" Y");
-          if (chop_z) SERIAL_ECHOPGM(" Z");
+          if (chop_x) SERIAL_ECHOPGM_P(SP_X_STR);
+          if (chop_y) SERIAL_ECHOPGM_P(SP_Y_STR);
+          if (chop_z) SERIAL_ECHOPGM_P(SP_Z_STR);
           SERIAL_EOL();
         }
 
@@ -3336,9 +3345,9 @@ void MarlinSettings::reset() {
 
         if (chop_x2 || chop_y2 || chop_z2) {
           say_M569(forReplay, PSTR("I1"));
-          if (chop_x2) SERIAL_ECHOPGM(" X");
-          if (chop_y2) SERIAL_ECHOPGM(" Y");
-          if (chop_z2) SERIAL_ECHOPGM(" Z");
+          if (chop_x2) SERIAL_ECHOPGM_P(SP_X_STR);
+          if (chop_y2) SERIAL_ECHOPGM_P(SP_Y_STR);
+          if (chop_z2) SERIAL_ECHOPGM_P(SP_Z_STR);
           SERIAL_EOL();
         }
 
@@ -3386,10 +3395,10 @@ void MarlinSettings::reset() {
     #if HAS_MOTOR_CURRENT_PWM
       CONFIG_ECHO_HEADING("Stepper motor currents:");
       CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR(
-          "  M907 X", stepper.motor_current_setting[0]
-        , " Z", stepper.motor_current_setting[1]
-        , " E", stepper.motor_current_setting[2]
+      SERIAL_ECHOLNPAIR_P(
+          PSTR("  M907 X"), stepper.motor_current_setting[0]
+        , SP_Z_STR, stepper.motor_current_setting[1]
+        , SP_E_STR, stepper.motor_current_setting[2]
       );
     #endif
 
@@ -3429,13 +3438,13 @@ void MarlinSettings::reset() {
     #if ENABLED(BACKLASH_GCODE)
       CONFIG_ECHO_HEADING("Backlash compensation:");
       CONFIG_ECHO_START();
-      SERIAL_ECHOLNPAIR(
-        "  M425 F", backlash.get_correction(),
-        " X", LINEAR_UNIT(backlash.distance_mm.x),
-        " Y", LINEAR_UNIT(backlash.distance_mm.y),
-        " Z", LINEAR_UNIT(backlash.distance_mm.z)
+      SERIAL_ECHOLNPAIR_P(
+          PSTR("  M425 F"), backlash.get_correction()
+        , SP_X_STR, LINEAR_UNIT(backlash.distance_mm.x)
+        , SP_Y_STR, LINEAR_UNIT(backlash.distance_mm.y)
+        , SP_Z_STR, LINEAR_UNIT(backlash.distance_mm.z)
         #ifdef BACKLASH_SMOOTHING_MM
-          , " S", LINEAR_UNIT(backlash.smoothing_mm)
+          , PSTR(" S"), LINEAR_UNIT(backlash.smoothing_mm)
         #endif
       );
     #endif
diff --git a/Marlin/src/module/delta.cpp b/Marlin/src/module/delta.cpp
index d1dc434e5a..38d3d8146d 100644
--- a/Marlin/src/module/delta.cpp
+++ b/Marlin/src/module/delta.cpp
@@ -117,7 +117,7 @@ float delta_calibration_radius() {
  */
 
 #define DELTA_DEBUG(VAR) do { \
-    SERIAL_ECHOLNPAIR("Cartesian X", VAR.x, " Y", VAR.y, " Z", VAR.z);   \
+    SERIAL_ECHOLNPAIR_P(PSTR("Cartesian X"), VAR.x, SP_Y_STR, VAR.y, SP_Z_STR, VAR.z); \
     SERIAL_ECHOLNPAIR("Delta A", delta.a, " B", delta.b, " C", delta.c); \
   }while(0)
 
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index cbe6035af7..eaabd687f6 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -129,7 +129,7 @@ xyz_pos_t probe_offset; // Initialized by settings.load()
       KEEPALIVE_STATE(PAUSED_FOR_USER);
       wait_for_user = true; // LCD click or M108 will clear this
       #if ENABLED(HOST_PROMPT_SUPPORT)
-        host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Deploy TouchMI probe."), PSTR("Continue"));
+        host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Deploy TouchMI probe."), CONTINUE_STR);
       #endif
       while (wait_for_user) idle();
       ui.reset_status();
@@ -290,7 +290,7 @@ FORCE_INLINE void probe_specific_action(const bool deploy) {
       KEEPALIVE_STATE(PAUSED_FOR_USER);
       wait_for_user = true;
       #if ENABLED(HOST_PROMPT_SUPPORT)
-        host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Stow Probe"), PSTR("Continue"));
+        host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Stow Probe"), CONTINUE_STR);
       #endif
       #if ENABLED(EXTENSIBLE_UI)
         ExtUI::onUserConfirmRequired_P(PSTR("Stow Probe"));
diff --git a/buildroot/share/tests/megaatmega2560-tests b/buildroot/share/tests/megaatmega2560-tests
index df300cdab3..f27005eb30 100755
--- a/buildroot/share/tests/megaatmega2560-tests
+++ b/buildroot/share/tests/megaatmega2560-tests
@@ -41,7 +41,7 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TE
            FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
            PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
            SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER LIN_ADVANCE \
-           PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
+           HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL
 opt_set TEMP_SENSOR_CHAMBER 3
 opt_set HEATER_CHAMBER_PIN 45
 exec_test $1 $2 "RAMPS | EXTRUDERS 2 | CHAR LCD + SD | FIX Probe | ABL-Linear | Advanced Pause | PLR | LEDs ..."