Add Bigtree SKR 1.3 board (#13267)
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
This commit is contained in:
Msq001
Scott Lahteine
parent
ddbe4cfa20
commit
f8a39919fa
|
|
@ -191,6 +191,7 @@
|
|||
#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
|
||||
#define BOARD_BIQU_SKR_V1_1 1759 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed)
|
||||
#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
|
||||
#define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
|
||||
//
|
||||
// SAM3X8E ARM Cortex M3
|
||||
|
|
|
|||
|
|
@ -334,6 +334,8 @@
|
|||
#include "pins_BIQU_SKR_V1.1.h" // LPC1768 env:LPC1768
|
||||
#elif MB(BIQU_B300_V1_0)
|
||||
#include "pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768
|
||||
#elif MB(BIGTREE_SKR_V1_3)
|
||||
#include "pins_BIGTREE_SKR_V1.3.h" // LPC1768 env:LPC1768
|
||||
|
||||
//
|
||||
// Other 32-bit Boards
|
||||
|
|
|
|||
237
Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
Normal file
237
Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
Normal file
|
|
@ -0,0 +1,237 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef TARGET_LPC1768
|
||||
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "BIGTREE SKR V1.3"
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN P2_00
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN P1_29
|
||||
#define X_MAX_PIN P1_28
|
||||
#define Y_MIN_PIN P1_27
|
||||
#define Y_MAX_PIN P1_26
|
||||
#define Z_MIN_PIN P1_25
|
||||
#define Z_MAX_PIN P1_24
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
//
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN P1_24
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN P2_02
|
||||
#define X_DIR_PIN P2_06
|
||||
#define X_ENABLE_PIN P2_01
|
||||
#ifndef X_CS_PIN
|
||||
#define X_CS_PIN P1_17
|
||||
#endif
|
||||
|
||||
#define Y_STEP_PIN P0_19
|
||||
#define Y_DIR_PIN P0_20
|
||||
#define Y_ENABLE_PIN P2_08
|
||||
#ifndef Y_CS_PIN
|
||||
#define Y_CS_PIN P1_15
|
||||
#endif
|
||||
|
||||
#define Z_STEP_PIN P0_22
|
||||
#define Z_DIR_PIN P2_11
|
||||
#define Z_ENABLE_PIN P0_21
|
||||
#ifndef Z_CS_PIN
|
||||
#define Z_CS_PIN P1_10
|
||||
#endif
|
||||
|
||||
#define E0_STEP_PIN P2_13
|
||||
#define E0_DIR_PIN P0_11
|
||||
#define E0_ENABLE_PIN P2_12
|
||||
#ifndef E0_CS_PIN
|
||||
#define E0_CS_PIN P1_08
|
||||
#endif
|
||||
|
||||
#define E1_STEP_PIN P0_01
|
||||
#define E1_DIR_PIN P0_00
|
||||
#define E1_ENABLE_PIN P0_10
|
||||
#ifndef E1_CS_PIN
|
||||
#define E1_CS_PIN P1_01
|
||||
#endif
|
||||
|
||||
//
|
||||
// Software SPI pins for TMC2130 stepper drivers
|
||||
//
|
||||
#if ENABLED(TMC_USE_SW_SPI)
|
||||
#define TMC_SW_MOSI P4_28
|
||||
#define TMC_SW_MISO P0_05
|
||||
#define TMC_SW_SCK P0_04
|
||||
#endif
|
||||
|
||||
#if HAS_DRIVER(TMC2208)
|
||||
/**
|
||||
* TMC2208 stepper drivers
|
||||
*
|
||||
* Hardware serial communication ports.
|
||||
* If undefined software serial is used according to the pins below
|
||||
*/
|
||||
//#define X_HARDWARE_SERIAL Serial
|
||||
//#define X2_HARDWARE_SERIAL Serial1
|
||||
//#define Y_HARDWARE_SERIAL Serial1
|
||||
//#define Y2_HARDWARE_SERIAL Serial1
|
||||
//#define Z_HARDWARE_SERIAL Serial1
|
||||
//#define Z2_HARDWARE_SERIAL Serial1
|
||||
//#define E0_HARDWARE_SERIAL Serial1
|
||||
//#define E1_HARDWARE_SERIAL Serial1
|
||||
//#define E2_HARDWARE_SERIAL Serial1
|
||||
//#define E3_HARDWARE_SERIAL Serial1
|
||||
//#define E4_HARDWARE_SERIAL Serial1
|
||||
|
||||
//
|
||||
// Software serial
|
||||
//
|
||||
#define X_SERIAL_TX_PIN P4_29
|
||||
#define X_SERIAL_RX_PIN P1_17
|
||||
|
||||
#define Y_SERIAL_TX_PIN P1_16
|
||||
#define Y_SERIAL_RX_PIN P1_15
|
||||
|
||||
#define Z_SERIAL_TX_PIN P1_14
|
||||
#define Z_SERIAL_RX_PIN P1_10
|
||||
|
||||
|
||||
#define E0_SERIAL_TX_PIN P1_09
|
||||
#define E0_SERIAL_RX_PIN P1_08
|
||||
|
||||
#define E1_SERIAL_TX_PIN P1_04
|
||||
#define E1_SERIAL_RX_PIN P1_01
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
// 3.3V max when defined as an analog input
|
||||
//
|
||||
#define TEMP_BED_PIN 0 // A0 (T0) - (67) - TEMP_BED_PIN
|
||||
#define TEMP_0_PIN 1 // A1 (T1) - (68) - TEMP_0_PIN
|
||||
#define TEMP_1_PIN 2 // A2 (T2) - (69) - TEMP_1_PIN
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN P2_07
|
||||
#if HOTENDS == 1
|
||||
#define FAN1_PIN P2_04
|
||||
#else
|
||||
#define HEATER_1_PIN P2_04
|
||||
#endif
|
||||
#define FAN_PIN P2_03
|
||||
#define HEATER_BED_PIN P2_05
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS P0_06
|
||||
|
||||
/*
|
||||
| _____ _____
|
||||
| NC | · · | GND 5V | · · | GND
|
||||
| RESET | · · | 1.31(SD_DETECT) (LCD_D7) 1.23 | · · | 1.22 (LCD_D6)
|
||||
| (MOSI)0.18 | · · | 3.25(BTN_EN2) (LCD_D5) 1.21 | · · | 1.20 (LCD_D4)
|
||||
| (SD_SS)0.16 | · · | 3.26(BTN_EN1) (LCD_RS) 1.19 | · · | 1.18 (LCD_EN)
|
||||
| (SCK)0.15 | · · | 0.17(MISO) (BTN_ENC) 0.28 | · · | 1.30 (BEEPER)
|
||||
| ￣￣ ￣￣
|
||||
| EXP2 EXP1
|
||||
*/
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
||||
#define BTN_ENC P0_28 // (58) open-drain
|
||||
#define LCD_PINS_RS P1_19
|
||||
|
||||
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
||||
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
||||
#define SD_DETECT_PIN P1_31 // (49) (NOT 5V tolerant)
|
||||
|
||||
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
|
||||
|
||||
#define LCD_PINS_ENABLE P1_18
|
||||
#define LCD_PINS_D4 P1_20
|
||||
|
||||
#if ENABLED(ULTIPANEL)
|
||||
|
||||
#define LCD_PINS_D5 P1_21
|
||||
#define LCD_PINS_D6 P1_22
|
||||
#define LCD_PINS_D7 P1_23
|
||||
|
||||
#endif
|
||||
|
||||
#endif // ULTRA_LCD
|
||||
|
||||
//#define USB_SD_DISABLED
|
||||
#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device
|
||||
|
||||
#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
|
||||
//#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board
|
||||
|
||||
#if ENABLED(LPC_SD_LCD)
|
||||
|
||||
#define SCK_PIN P0_15
|
||||
#define MISO_PIN P0_17
|
||||
#define MOSI_PIN P0_18
|
||||
#define SS_PIN P0_16 // Chip select for SD card used by Marlin
|
||||
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
|
||||
|
||||
#elif ENABLED(LPC_SD_ONBOARD)
|
||||
|
||||
#if ENABLED(USB_SD_ONBOARD)
|
||||
// When sharing the SD card with a PC we want the menu options to
|
||||
// mount/unmount the card and refresh it. So we disable card detect.
|
||||
#define SHARED_SD_CARD
|
||||
#undef SD_DETECT_PIN // redefine detect pin onboard tf card
|
||||
#define SD_DETECT_PIN P0_27 // (57) open-drain
|
||||
#endif
|
||||
|
||||
#define SCK_PIN P0_07
|
||||
#define MISO_PIN P0_08
|
||||
#define MOSI_PIN P0_09
|
||||
#define SS_PIN P0_16 // Chip select for SD card used by Marlin
|
||||
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Special pins
|
||||
* P1_30 (37) (NOT 5V tolerant)
|
||||
* P1_31 (49) (NOT 5V tolerant)
|
||||
* P0_27 (57) (Open collector)
|
||||
* P0_28 (58) (Open collector)
|
||||
*/
|
||||
|
|
@ -137,7 +137,7 @@
|
|||
#define SCK_PIN P0_07
|
||||
#define MISO_PIN P0_08
|
||||
#define MOSI_PIN P0_09
|
||||
#define SS_PIN P0_06 // Chip select for SD card used by Marlin
|
||||
#define SS_PIN P1_23 // Chip select for SD card used by Marlin
|
||||
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
|
||||
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in a new issue