From fc32e20881cdf639dfad00f54eedf2e44f93c0c4 Mon Sep 17 00:00:00 2001 From: drake Date: Sat, 8 Sep 2012 22:26:23 +0200 Subject: [PATCH] first commit --- Marlin/.gitignore | 5 + Marlin/Marlin/Boards/boards.txt | 35 + .../bootloaders/atmega644p/ATmegaBOOT.c | 713 + .../atmega644p/ATmegaBOOT_324P.hex | 121 + .../bootloaders/atmega644p/ATmegaBOOT_644.hex | 120 + .../atmega644p/ATmegaBOOT_644P.hex | 121 + .../Boards/bootloaders/atmega644p/Makefile | 56 + .../Boards/bootloaders/atmega644p/README.txt | 3 + Marlin/Marlin/Boards/cores/arduino/Arduino.h | 1 + .../Boards/cores/arduino/Copy of wiring.h | 135 + .../Boards/cores/arduino/HardwareSerial.cpp | 202 + .../Boards/cores/arduino/HardwareSerial.h | 87 + Marlin/Marlin/Boards/cores/arduino/Print.cpp | 220 + Marlin/Marlin/Boards/cores/arduino/Print.h | 77 + Marlin/Marlin/Boards/cores/arduino/Stream.h | 35 + Marlin/Marlin/Boards/cores/arduino/Tone.cpp | 601 + .../Marlin/Boards/cores/arduino/WCharacter.h | 168 + .../Marlin/Boards/cores/arduino/WConstants.h | 1 + .../Marlin/Boards/cores/arduino/WInterrupts.c | 249 + Marlin/Marlin/Boards/cores/arduino/WMath.cpp | 60 + Marlin/Marlin/Boards/cores/arduino/WProgram.h | 63 + .../Marlin/Boards/cores/arduino/WString.cpp | 443 + Marlin/Marlin/Boards/cores/arduino/WString.h | 112 + Marlin/Marlin/Boards/cores/arduino/binary.h | 515 + Marlin/Marlin/Boards/cores/arduino/main.cpp | 14 + .../Boards/cores/arduino/pins_arduino.c | 200 + .../Boards/cores/arduino/pins_arduino.h | 65 + Marlin/Marlin/Boards/cores/arduino/wiring.c | 289 + Marlin/Marlin/Boards/cores/arduino/wiring.h | 136 + .../Boards/cores/arduino/wiring_analog.c | 259 + .../Boards/cores/arduino/wiring_digital.c | 166 + .../Boards/cores/arduino/wiring_private.h | 68 + .../Boards/cores/arduino/wiring_pulse.c | 69 + .../Boards/cores/arduino/wiring_shift.c | 55 + Marlin/Marlin/COPYING | 188 + Marlin/Marlin/Configuration.h | 294 + Marlin/Marlin/Configuration_adv.h | 263 + Marlin/Marlin/EEPROMwrite.h | 232 + Marlin/Marlin/Gen7/boards.txt | 101 + .../Gen7/bootloader-1284P-16MHz.hex | 113 + .../bootloaders/Gen7/bootloader-644-16MHz.hex | 75 + .../bootloaders/Gen7/bootloader-644-20MHz.hex | 75 + .../Gen7/bootloader-644P-16MHz.hex | 75 + .../Gen7/bootloader-644P-20MHz.hex | 75 + .../Gen7/cores/arduino/HardwareSerial.cpp | 239 + .../Gen7/cores/arduino/HardwareSerial.h | 69 + Marlin/Marlin/Gen7/cores/arduino/Makefile | 243 + Marlin/Marlin/Gen7/cores/arduino/Print.cpp | 203 + Marlin/Marlin/Gen7/cores/arduino/Print.h | 59 + Marlin/Marlin/Gen7/cores/arduino/Tone.cpp | 515 + Marlin/Marlin/Gen7/cores/arduino/WCharacter.h | 168 + Marlin/Marlin/Gen7/cores/arduino/WConstants.h | 1 + .../Marlin/Gen7/cores/arduino/WInterrupts.c | 87 + Marlin/Marlin/Gen7/cores/arduino/WMath.cpp | 60 + Marlin/Marlin/Gen7/cores/arduino/WProgram.h | 34 + Marlin/Marlin/Gen7/cores/arduino/WString.cpp | 443 + Marlin/Marlin/Gen7/cores/arduino/WString.h | 112 + Marlin/Marlin/Gen7/cores/arduino/binary.h | 515 + Marlin/Marlin/Gen7/cores/arduino/main.cpp | 14 + Marlin/Marlin/Gen7/cores/arduino/main.cxx | 12 + .../Marlin/Gen7/cores/arduino/pins_arduino.c | 200 + .../Marlin/Gen7/cores/arduino/pins_arduino.h | 65 + Marlin/Marlin/Gen7/cores/arduino/wiring.c | 203 + Marlin/Marlin/Gen7/cores/arduino/wiring.h | 133 + .../Marlin/Gen7/cores/arduino/wiring_analog.c | 116 + .../Gen7/cores/arduino/wiring_digital.c | 95 + .../Gen7/cores/arduino/wiring_private.h | 60 + .../Marlin/Gen7/cores/arduino/wiring_pulse.c | 66 + .../Marlin/Gen7/cores/arduino/wiring_serial.c | 138 + .../Marlin/Gen7/cores/arduino/wiring_shift.c | 40 + Marlin/Marlin/LCD Menu Tree.pdf | Bin 0 -> 217464 bytes Marlin/Marlin/Makefile | 298 + Marlin/Marlin/Marlin.h | 203 + Marlin/Marlin/Marlin.pde | 1832 +++ Marlin/Marlin/MarlinSerial.cpp | 329 + Marlin/Marlin/MarlinSerial.h | 150 + Marlin/Marlin/Menu Plans.xlsx | Bin 0 -> 51386 bytes Marlin/Marlin/Sanguino/boards.txt | 16 + .../bootloaders/atmega644p/ATmegaBOOT.c | 713 + .../atmega644p/ATmegaBOOT_324P.hex | 121 + .../bootloaders/atmega644p/ATmegaBOOT_644.hex | 120 + .../atmega644p/ATmegaBOOT_644P.hex | 121 + .../Sanguino/bootloaders/atmega644p/Makefile | 56 + .../bootloaders/atmega644p/README.txt | 3 + .../Sanguino/cores/arduino/Copy of wiring.h | 135 + .../Sanguino/cores/arduino/HardwareSerial.cpp | 187 + .../Sanguino/cores/arduino/HardwareSerial.h | 76 + .../Marlin/Sanguino/cores/arduino/Print.cpp | 220 + Marlin/Marlin/Sanguino/cores/arduino/Print.h | 66 + Marlin/Marlin/Sanguino/cores/arduino/Stream.h | 35 + Marlin/Marlin/Sanguino/cores/arduino/Tone.cpp | 601 + .../Sanguino/cores/arduino/WCharacter.h | 168 + .../Sanguino/cores/arduino/WConstants.h | 1 + .../Sanguino/cores/arduino/WInterrupts.c | 249 + .../Marlin/Sanguino/cores/arduino/WMath.cpp | 60 + .../Marlin/Sanguino/cores/arduino/WProgram.h | 63 + .../Marlin/Sanguino/cores/arduino/WString.cpp | 443 + .../Marlin/Sanguino/cores/arduino/WString.h | 112 + Marlin/Marlin/Sanguino/cores/arduino/binary.h | 515 + Marlin/Marlin/Sanguino/cores/arduino/main.cpp | 14 + .../Sanguino/cores/arduino/pins_arduino.c | 200 + .../Sanguino/cores/arduino/pins_arduino.h | 65 + Marlin/Marlin/Sanguino/cores/arduino/wiring.c | 289 + Marlin/Marlin/Sanguino/cores/arduino/wiring.h | 136 + .../Sanguino/cores/arduino/wiring_analog.c | 259 + .../Sanguino/cores/arduino/wiring_digital.c | 166 + .../Sanguino/cores/arduino/wiring_private.h | 68 + .../Sanguino/cores/arduino/wiring_pulse.c | 69 + .../Sanguino/cores/arduino/wiring_shift.c | 55 + Marlin/Marlin/Sanguino/programmers.txt | 20 + Marlin/Marlin/Sd2Card.cpp | 641 + Marlin/Marlin/Sd2Card.h | 241 + Marlin/Marlin/Sd2PinMap.h | 368 + Marlin/Marlin/SdBaseFile.cpp | 1825 +++ Marlin/Marlin/SdBaseFile.h | 483 + Marlin/Marlin/SdFatConfig.h | 121 + Marlin/Marlin/SdFatStructs.h | 646 + Marlin/Marlin/SdFatUtil.cpp | 79 + Marlin/Marlin/SdFatUtil.h | 48 + Marlin/Marlin/SdFile.cpp | 92 + Marlin/Marlin/SdFile.h | 54 + Marlin/Marlin/SdInfo.h | 280 + Marlin/Marlin/SdVolume.cpp | 405 + Marlin/Marlin/SdVolume.h | 214 + Marlin/Marlin/cardreader.cpp | 536 + Marlin/Marlin/cardreader.h | 76 + Marlin/Marlin/createTemperatureLookup.py | 127 + Marlin/Marlin/create_speed_lookuptable.py | 50 + Marlin/Marlin/fastio.h | 2582 ++++ .../hardware/tools/avr/etc/avrdude.conf | 12104 ++++++++++++++++ Marlin/Marlin/language.h | 498 + Marlin/Marlin/motion_control.cpp | 137 + Marlin/Marlin/motion_control.h | 32 + Marlin/Marlin/pins.h | 1162 ++ Marlin/Marlin/planner.cpp | 866 ++ Marlin/Marlin/planner.h | 139 + Marlin/Marlin/speed_lookuptable.h | 152 + Marlin/Marlin/stepper.cpp | 953 ++ Marlin/Marlin/stepper.h | 71 + Marlin/Marlin/temperature.cpp | 1019 ++ Marlin/Marlin/temperature.h | 169 + Marlin/Marlin/thermistortables.h | 507 + Marlin/Marlin/ultralcd.h | 172 + Marlin/Marlin/ultralcd.pde | 3023 ++++ Marlin/Marlin/watchdog.h | 16 + Marlin/Marlin/watchdog.pde | 63 + Marlin/Marlin/wiring.h | 141 + Marlin/README.md | 222 + 148 files changed, 49393 insertions(+) create mode 100644 Marlin/.gitignore create mode 100644 Marlin/Marlin/Boards/boards.txt create mode 100644 Marlin/Marlin/Boards/bootloaders/atmega644p/ATmegaBOOT.c create mode 100644 Marlin/Marlin/Boards/bootloaders/atmega644p/ATmegaBOOT_324P.hex create mode 100644 Marlin/Marlin/Boards/bootloaders/atmega644p/ATmegaBOOT_644.hex create mode 100644 Marlin/Marlin/Boards/bootloaders/atmega644p/ATmegaBOOT_644P.hex create mode 100644 Marlin/Marlin/Boards/bootloaders/atmega644p/Makefile create mode 100644 Marlin/Marlin/Boards/bootloaders/atmega644p/README.txt create mode 100644 Marlin/Marlin/Boards/cores/arduino/Arduino.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/Copy of wiring.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/HardwareSerial.cpp create mode 100644 Marlin/Marlin/Boards/cores/arduino/HardwareSerial.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/Print.cpp create mode 100644 Marlin/Marlin/Boards/cores/arduino/Print.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/Stream.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/Tone.cpp create mode 100644 Marlin/Marlin/Boards/cores/arduino/WCharacter.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/WConstants.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/WInterrupts.c create mode 100644 Marlin/Marlin/Boards/cores/arduino/WMath.cpp create mode 100644 Marlin/Marlin/Boards/cores/arduino/WProgram.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/WString.cpp create mode 100644 Marlin/Marlin/Boards/cores/arduino/WString.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/binary.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/main.cpp create mode 100644 Marlin/Marlin/Boards/cores/arduino/pins_arduino.c create mode 100644 Marlin/Marlin/Boards/cores/arduino/pins_arduino.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/wiring.c create mode 100644 Marlin/Marlin/Boards/cores/arduino/wiring.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/wiring_analog.c create mode 100644 Marlin/Marlin/Boards/cores/arduino/wiring_digital.c create mode 100644 Marlin/Marlin/Boards/cores/arduino/wiring_private.h create mode 100644 Marlin/Marlin/Boards/cores/arduino/wiring_pulse.c create mode 100644 Marlin/Marlin/Boards/cores/arduino/wiring_shift.c create mode 100644 Marlin/Marlin/COPYING create mode 100644 Marlin/Marlin/Configuration.h create mode 100644 Marlin/Marlin/Configuration_adv.h create mode 100644 Marlin/Marlin/EEPROMwrite.h create mode 100644 Marlin/Marlin/Gen7/boards.txt create mode 100644 Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-1284P-16MHz.hex create mode 100644 Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644-16MHz.hex create mode 100644 Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644-20MHz.hex create mode 100644 Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-16MHz.hex create mode 100644 Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-20MHz.hex create mode 100644 Marlin/Marlin/Gen7/cores/arduino/HardwareSerial.cpp create mode 100644 Marlin/Marlin/Gen7/cores/arduino/HardwareSerial.h create mode 100644 Marlin/Marlin/Gen7/cores/arduino/Makefile create mode 100644 Marlin/Marlin/Gen7/cores/arduino/Print.cpp create mode 100644 Marlin/Marlin/Gen7/cores/arduino/Print.h create mode 100644 Marlin/Marlin/Gen7/cores/arduino/Tone.cpp create mode 100644 Marlin/Marlin/Gen7/cores/arduino/WCharacter.h create mode 100644 Marlin/Marlin/Gen7/cores/arduino/WConstants.h create mode 100644 Marlin/Marlin/Gen7/cores/arduino/WInterrupts.c create mode 100644 Marlin/Marlin/Gen7/cores/arduino/WMath.cpp create mode 100644 Marlin/Marlin/Gen7/cores/arduino/WProgram.h create mode 100644 Marlin/Marlin/Gen7/cores/arduino/WString.cpp create mode 100644 Marlin/Marlin/Gen7/cores/arduino/WString.h create mode 100644 Marlin/Marlin/Gen7/cores/arduino/binary.h create mode 100644 Marlin/Marlin/Gen7/cores/arduino/main.cpp create mode 100644 Marlin/Marlin/Gen7/cores/arduino/main.cxx create mode 100644 Marlin/Marlin/Gen7/cores/arduino/pins_arduino.c create mode 100644 Marlin/Marlin/Gen7/cores/arduino/pins_arduino.h create mode 100644 Marlin/Marlin/Gen7/cores/arduino/wiring.c create mode 100644 Marlin/Marlin/Gen7/cores/arduino/wiring.h create mode 100644 Marlin/Marlin/Gen7/cores/arduino/wiring_analog.c create mode 100644 Marlin/Marlin/Gen7/cores/arduino/wiring_digital.c create mode 100644 Marlin/Marlin/Gen7/cores/arduino/wiring_private.h create mode 100644 Marlin/Marlin/Gen7/cores/arduino/wiring_pulse.c create mode 100644 Marlin/Marlin/Gen7/cores/arduino/wiring_serial.c create mode 100644 Marlin/Marlin/Gen7/cores/arduino/wiring_shift.c create mode 100644 Marlin/Marlin/LCD Menu Tree.pdf create mode 100644 Marlin/Marlin/Makefile create mode 100644 Marlin/Marlin/Marlin.h create mode 100644 Marlin/Marlin/Marlin.pde create mode 100644 Marlin/Marlin/MarlinSerial.cpp create mode 100644 Marlin/Marlin/MarlinSerial.h create mode 100644 Marlin/Marlin/Menu Plans.xlsx create mode 100644 Marlin/Marlin/Sanguino/boards.txt create mode 100644 Marlin/Marlin/Sanguino/bootloaders/atmega644p/ATmegaBOOT.c create mode 100644 Marlin/Marlin/Sanguino/bootloaders/atmega644p/ATmegaBOOT_324P.hex create mode 100644 Marlin/Marlin/Sanguino/bootloaders/atmega644p/ATmegaBOOT_644.hex create mode 100644 Marlin/Marlin/Sanguino/bootloaders/atmega644p/ATmegaBOOT_644P.hex create mode 100644 Marlin/Marlin/Sanguino/bootloaders/atmega644p/Makefile create mode 100644 Marlin/Marlin/Sanguino/bootloaders/atmega644p/README.txt create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/Copy of wiring.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/HardwareSerial.cpp create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/HardwareSerial.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/Print.cpp create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/Print.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/Stream.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/Tone.cpp create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/WCharacter.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/WConstants.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/WInterrupts.c create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/WMath.cpp create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/WProgram.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/WString.cpp create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/WString.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/binary.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/main.cpp create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/pins_arduino.c create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/pins_arduino.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/wiring.c create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/wiring.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/wiring_analog.c create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/wiring_digital.c create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/wiring_private.h create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/wiring_pulse.c create mode 100644 Marlin/Marlin/Sanguino/cores/arduino/wiring_shift.c create mode 100644 Marlin/Marlin/Sanguino/programmers.txt create mode 100644 Marlin/Marlin/Sd2Card.cpp create mode 100644 Marlin/Marlin/Sd2Card.h create mode 100644 Marlin/Marlin/Sd2PinMap.h create mode 100644 Marlin/Marlin/SdBaseFile.cpp create mode 100644 Marlin/Marlin/SdBaseFile.h create mode 100644 Marlin/Marlin/SdFatConfig.h create mode 100644 Marlin/Marlin/SdFatStructs.h create mode 100644 Marlin/Marlin/SdFatUtil.cpp create mode 100644 Marlin/Marlin/SdFatUtil.h create mode 100644 Marlin/Marlin/SdFile.cpp create mode 100644 Marlin/Marlin/SdFile.h create mode 100644 Marlin/Marlin/SdInfo.h create mode 100644 Marlin/Marlin/SdVolume.cpp create mode 100644 Marlin/Marlin/SdVolume.h create mode 100644 Marlin/Marlin/cardreader.cpp create mode 100644 Marlin/Marlin/cardreader.h create mode 100644 Marlin/Marlin/createTemperatureLookup.py create mode 100755 Marlin/Marlin/create_speed_lookuptable.py create mode 100644 Marlin/Marlin/fastio.h create mode 100644 Marlin/Marlin/hardware/tools/avr/etc/avrdude.conf create mode 100644 Marlin/Marlin/language.h create mode 100644 Marlin/Marlin/motion_control.cpp create mode 100644 Marlin/Marlin/motion_control.h create mode 100644 Marlin/Marlin/pins.h create mode 100644 Marlin/Marlin/planner.cpp create mode 100644 Marlin/Marlin/planner.h create mode 100644 Marlin/Marlin/speed_lookuptable.h create mode 100644 Marlin/Marlin/stepper.cpp create mode 100644 Marlin/Marlin/stepper.h create mode 100644 Marlin/Marlin/temperature.cpp create mode 100644 Marlin/Marlin/temperature.h create mode 100644 Marlin/Marlin/thermistortables.h create mode 100644 Marlin/Marlin/ultralcd.h create mode 100644 Marlin/Marlin/ultralcd.pde create mode 100644 Marlin/Marlin/watchdog.h create mode 100644 Marlin/Marlin/watchdog.pde create mode 100644 Marlin/Marlin/wiring.h create mode 100644 Marlin/README.md diff --git a/Marlin/.gitignore b/Marlin/.gitignore new file mode 100644 index 0000000000..0a12acfd7c --- /dev/null +++ b/Marlin/.gitignore @@ -0,0 +1,5 @@ +*.o +applet/ +*~ +*.orig +*.rej diff --git a/Marlin/Marlin/Boards/boards.txt b/Marlin/Marlin/Boards/boards.txt new file mode 100644 index 0000000000..5730251750 --- /dev/null +++ b/Marlin/Marlin/Boards/boards.txt @@ -0,0 +1,35 @@ +############################################################## + +Generation_Series.name=Gen6 & Gen6 Deluxe +Generation_Series.upload.protocol=stk500 +Generation_Series.upload.maximum_size=63488 +Generation_Series.upload.speed=38400 +Generation_Series.bootloader.low_fuses=0xFF +Generation_Series.bootloader.high_fuses=0xDC +Generation_Series.bootloader.extended_fuses=0xFD +Generation_Series.bootloader.path=atmega644p +Generation_Series.bootloader.file=ATmegaBOOT_644P.hex +Generation_Series.bootloader.unlock_bits=0x3F +Generation_Series.bootloader.lock_bits=0x0F +Generation_Series.build.mcu=atmega644p +Generation_Series.build.f_cpu=16000000L +Generation_Series.build.core=arduino + + +############################################################## + + +Sanguinololu.name=Sanguinololu 1.2 and above +Sanguinololu.upload.protocol=stk500 +Sanguinololu.upload.maximum_size=63488 +Sanguinololu.upload.speed=38400 +Sanguinololu.bootloader.low_fuses=0xFF +Sanguinololu.bootloader.high_fuses=0xDC +Sanguinololu.bootloader.extended_fuses=0xFD +Sanguinololu.bootloader.path=atmega644p +Sanguinololu.bootloader.file=ATmegaBOOT_644P.hex +Sanguinololu.bootloader.unlock_bits=0x3F +Sanguinololu.bootloader.lock_bits=0x0F +Sanguinololu.build.mcu=atmega644p +Sanguinololu.build.f_cpu=16000000L +Sanguinololu.build.core=arduino diff --git a/Marlin/Marlin/Boards/bootloaders/atmega644p/ATmegaBOOT.c b/Marlin/Marlin/Boards/bootloaders/atmega644p/ATmegaBOOT.c new file mode 100644 index 0000000000..30cfa39e62 --- /dev/null +++ b/Marlin/Marlin/Boards/bootloaders/atmega644p/ATmegaBOOT.c @@ -0,0 +1,713 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel megaAVR Controllers */ +/* */ +/* tested with ATmega644 and ATmega644P */ +/* should work with other mega's, see code for details */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* 20090131: Added 324P support from Alex Leone */ +/* Marius Kintel */ +/* 20080915: applied ADABoot mods for Sanguino 644P */ +/* Brian Riley */ +/* 20080711: hacked for Sanguino by Zach Smith */ +/* and Justin Day */ +/* 20070626: hacked for Arduino Diecimila (which auto- */ +/* resets when a USB connection is made to it) */ +/* by D. Mellis */ +/* 20060802: hacked for Arduino by D. Cuartielles */ +/* based on a previous hack by D. Mellis */ +/* and D. Cuartielles */ +/* */ +/* Monitor and debug functions were added to the original */ +/* code by Dr. Erik Lins, chip45.com. (See below) */ +/* */ +/* Thanks to Karl Pitrich for fixing a bootloader pin */ +/* problem and more informative LED blinking! */ +/* */ +/* For the latest version see: */ +/* http://www.chip45.com/ */ +/* */ +/* ------------------------------------------------------ */ +/* */ +/* based on stk500boot.c */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* All rights reserved. */ +/* see avr1.org for original file and information */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ +/* m8515,m8535. ATmega161 has a very small boot block so */ +/* isn't supported. */ +/* */ +/* Tested with m168 */ +/**********************************************************/ + +/* $Id$ */ + + +/* some includes */ +#include +#include +#include +#include +#include +#include + +#ifdef ADABOOT + #define NUM_LED_FLASHES 3 + #define ADABOOT_VER 1 +#endif + + +/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */ +#define MAX_ERROR_COUNT 5 + +/* set the UART baud rate */ +/* 20080711: hack by Zach Hoeken */ +#define BAUD_RATE 38400 + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +/* never allow AVR Studio to do an update !!!! */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x10 + +/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ +/* if monitor functions are included, LED goes on after monitor was entered */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB0 + +/* define various device id's */ +/* manufacturer byte is always the same */ +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( +#if defined(__AVR_ATmega644P__) +#define SIG2 0x96 +#define SIG3 0x0A +#elif defined(__AVR_ATmega644__) +#define SIG2 0x96 +#define SIG3 0x09 +#elif defined(__AVR_ATmega324P__) +#define SIG2 0x95 +#define SIG3 0x08 +#endif +#define PAGE_SIZE 0x080U //128 words +#define PAGE_SIZE_BYTES 0x100U //256 bytes + +/* function prototypes */ +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); +char gethex(void); +void puthex(char); +void flash_led(uint8_t); + +/* some variables */ +union address_union +{ + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union +{ + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct +{ + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; + +uint8_t error_count = 0; +uint8_t sreg; + +void (*app_start)(void) = 0x0000; + +/* main program starts here */ +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + uint16_t i; + + asm volatile("nop\n\t"); + +#ifdef ADABOOT // BBR/LF 10/8/2007 & 9/13/2008 + ch = MCUSR; + MCUSR = 0; + + WDTCSR |= _BV(WDCE) | _BV(WDE); + WDTCSR = 0; + + // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. + if (! (ch & _BV(EXTRF))) // if its a not an external reset... + app_start(); // skip bootloader +#endif + + + //initialize our serial port. + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0B = (1< 0x85) + getch(); + nothing_response(); + } + + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') + { + ch2 = getch(); + if(ch2 == 0x80) + byte_response(HW_VER); // Hardware version + else if(ch2==0x81) + byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) + byte_response(SW_MINOR); // Software minor version + else if(ch2==0x98) + byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else + byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') + { + getNch(20); + nothing_response(); + } + + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') + { + getNch(5); + nothing_response(); + } + + + /* Enter programming mode */ + else if(ch=='P') + { + nothing_response(); + } + + + /* Leave programming mode */ + else if(ch=='Q') + { + nothing_response(); +#ifdef ADABOOT + // autoreset via watchdog (sneaky!) BBR/LF 9/13/2008 + WDTCSR = _BV(WDE); + while (1); // 16 ms +#endif + } + + + /* Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='R') + { + nothing_response(); + } + + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') + { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') + { + getNch(4); + byte_response(0x00); + } + + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') + { + length.byte[1] = getch(); + length.byte[0] = getch(); + + flags.eeprom = 0; + if (getch() == 'E') + flags.eeprom = 1; + + for (i=0; i byte location + address.word = address.word << 1; + + //Even up an odd number of bytes + if ((length.byte[0] & 0x01)) + length.word++; + + // HACKME: EEPE used to be EEWE + //Wait for previous EEPROM writes to complete + //while(bit_is_set(EECR,EEPE)); + while(EECR & (1< byte location + } + + // Command terminator + if (getch() == ' ') + { + putch(0x14); + for (w=0; w= 'a') + ah = ah - 'a' + 0x0a; + else if(ah >= '0') + ah -= '0'; + if(al >= 'a') + al = al - 'a' + 0x0a; + else if(al >= '0') + al -= '0'; + + return (ah << 4) + al; +} + + +void puthex(char ch) +{ + char ah,al; + + ah = (ch & 0xf0) >> 4; + if(ah >= 0x0a) + ah = ah - 0x0a + 'a'; + else + ah += '0'; + + al = (ch & 0x0f); + if(al >= 0x0a) + al = al - 0x0a + 'a'; + else + al += '0'; + + putch(ah); + putch(al); +} + + +void putch(char ch) +{ + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +} + + + + +char getch(void) +{ + uint32_t count = 0; + +#ifdef ADABOOT + LED_PORT &= ~_BV(LED); // toggle LED to show activity - BBR/LF 10/3/2007 & 9/13/2008 +#endif + + while(!(UCSR0A & _BV(RXC0))) + { + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + +#ifdef ADABOOT + LED_PORT |= _BV(LED); // toggle LED to show activity - BBR/LF 10/3/2007 & 9/13/2008 +#endif + + return UDR0; +} + + +void getNch(uint8_t count) +{ + uint8_t i; + for(i=0;i $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + \ No newline at end of file diff --git a/Marlin/Marlin/Boards/bootloaders/atmega644p/README.txt b/Marlin/Marlin/Boards/bootloaders/atmega644p/README.txt new file mode 100644 index 0000000000..d303857980 --- /dev/null +++ b/Marlin/Marlin/Boards/bootloaders/atmega644p/README.txt @@ -0,0 +1,3 @@ +Note: This bootloader support ATmega644, ATmega644P and ATmega324P. +To build, set PROGRAM and MCU_TARGET in the Makefile according to your target device. + diff --git a/Marlin/Marlin/Boards/cores/arduino/Arduino.h b/Marlin/Marlin/Boards/cores/arduino/Arduino.h new file mode 100644 index 0000000000..38fee8440b --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/Arduino.h @@ -0,0 +1 @@ + #include "WProgram.h" diff --git a/Marlin/Marlin/Boards/cores/arduino/Copy of wiring.h b/Marlin/Marlin/Boards/cores/arduino/Copy of wiring.h new file mode 100644 index 0000000000..aa8843c7aa --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/Copy of wiring.h @@ -0,0 +1,135 @@ +/* + wiring.h - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#ifndef Wiring_h +#define Wiring_h + +#include +#include +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 + +#define true 0x1 +#define false 0x0 + +#define PI 3.1415926535897932384626433832795 +#define HALF_PI 1.5707963267948966192313216916398 +#define TWO_PI 6.283185307179586476925286766559 +#define DEG_TO_RAD 0.017453292519943295769236907684886 +#define RAD_TO_DEG 57.295779513082320876798154814105 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define INTERNAL1V1 2 +#define INTERNAL2V56 3 +#else +#define INTERNAL 3 +#endif +#define DEFAULT 1 +#define EXTERNAL 0 + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (F_CPU / 1000L) ) +#define microsecondsToClockCycles(a) ( ((a) * (F_CPU / 1000L)) / 1000L ) + +#define lowByte(w) ((uint8_t) ((w) & 0xff)) +#define highByte(w) ((uint8_t) ((w) >> 8)) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + + +typedef unsigned int word; + +#define bit(b) (1UL << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/Marlin/Boards/cores/arduino/HardwareSerial.cpp b/Marlin/Marlin/Boards/cores/arduino/HardwareSerial.cpp new file mode 100644 index 0000000000..c92c992faa --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/HardwareSerial.cpp @@ -0,0 +1,202 @@ +/* + HardwareSerial.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul +*/ + +#include +#include +#include +#include +#include "wiring.h" +#include "wiring_private.h" + +// this next line disables the entire HardwareSerial.cpp, +// this is so I can support Attiny series and any other chip without a uart +#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H) + +#include "HardwareSerial.h" + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which rx_buffer_head is the index of the +// location to which to write the next incoming character and rx_buffer_tail +// is the index of the location from which to read. +#define RX_BUFFER_SIZE 128 + +struct ring_buffer +{ + unsigned char buffer[RX_BUFFER_SIZE]; + int head; + int tail; +}; + +ring_buffer rx_buffer = { { 0 }, 0, 0 }; + +inline void store_char(unsigned char c, ring_buffer *rx_buffer) +{ + int i = (unsigned int)(rx_buffer->head + 1) & (RX_BUFFER_SIZE -1); + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != rx_buffer->tail) { + rx_buffer->buffer[rx_buffer->head] = c; + rx_buffer->head = i; + } +} + +// fixed by Mark Sproul this is on the 644/644p +//SIGNAL(SIG_USART_RECV) +SIGNAL(USART0_RX_vect) +{ + unsigned char c = UDR0; + store_char(c, &rx_buffer); +} + + +// Constructors //////////////////////////////////////////////////////////////// + +HardwareSerial::HardwareSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x) +{ + _rx_buffer = rx_buffer; + _ubrrh = ubrrh; + _ubrrl = ubrrl; + _ucsra = ucsra; + _ucsrb = ucsrb; + _udr = udr; + _rxen = rxen; + _txen = txen; + _rxcie = rxcie; + _udre = udre; + _u2x = u2x; +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void HardwareSerial::begin(long baud) +{ + uint16_t baud_setting; + bool use_u2x = true; + +#if F_CPU == 16000000UL + // hardcoded exception for compatibility with the bootloader shipped + // with the Duemilanove and previous boards and the firmware on the 8U2 + // on the Uno and Mega 2560. + if (baud == 57600) { + use_u2x = false; + } +#endif + + if (use_u2x) { + *_ucsra = 1 << _u2x; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + *_ucsra = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + *_ubrrh = baud_setting >> 8; + *_ubrrl = baud_setting; + + sbi(*_ucsrb, _rxen); + sbi(*_ucsrb, _txen); + sbi(*_ucsrb, _rxcie); +} + +void HardwareSerial::end() +{ + cbi(*_ucsrb, _rxen); + cbi(*_ucsrb, _txen); + cbi(*_ucsrb, _rxcie); +} + +int HardwareSerial::available(void) +{ + return (unsigned int)(RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) & (RX_BUFFER_SIZE-1); +} + +int HardwareSerial::peek(void) +{ + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + return _rx_buffer->buffer[_rx_buffer->tail]; + } +} + +int HardwareSerial::read(void) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + unsigned char c = _rx_buffer->buffer[_rx_buffer->tail]; + _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) & (RX_BUFFER_SIZE-1); + return c; + } +} + +void HardwareSerial::flush() +{ + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // were full, not empty. + _rx_buffer->head = _rx_buffer->tail; +} + +// +// Drakelive 2012-09-04 +// +#if ARDUINO >= 100 + size_t HardwareSerial::write(uint8_t c) + { + while (!((*_ucsra) & (1 << _udre))) + ; + + *_udr = c; + } +#else + void HardwareSerial::write(uint8_t c) + { + while (!((*_ucsra) & (1 << _udre))) + ; + + *_udr = c; + } +#endif + +// Drakelive 2012-09-04 + +// Preinstantiate Objects ////////////////////////////////////////////////////// +HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0, U2X0); + +#endif // whole file + diff --git a/Marlin/Marlin/Boards/cores/arduino/HardwareSerial.h b/Marlin/Marlin/Boards/cores/arduino/HardwareSerial.h new file mode 100644 index 0000000000..5d2a204895 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/HardwareSerial.h @@ -0,0 +1,87 @@ +/* + HardwareSerial.h - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 28 September 2010 by Mark Sproul +*/ + +#ifndef HardwareSerial_h +#define HardwareSerial_h + +#include + +#include "Stream.h" + +struct ring_buffer; + +class HardwareSerial : public Stream +{ + private: + ring_buffer *_rx_buffer; + volatile uint8_t *_ubrrh; + volatile uint8_t *_ubrrl; + volatile uint8_t *_ucsra; + volatile uint8_t *_ucsrb; + volatile uint8_t *_udr; + uint8_t _rxen; + uint8_t _txen; + uint8_t _rxcie; + uint8_t _udre; + uint8_t _u2x; + public: + HardwareSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x); + void begin(long); + void end(); + virtual int available(void); + virtual int peek(void); + virtual int read(void); + virtual void flush(void); + + // + // Drakelive 2012-09-04 + // + #if ARDUINO >= 100 + virtual size_t write(uint8_t); + #else + virtual void write(uint8_t); + #endif + + // Drakelive 2012-09-04 + + using Print::write; // pull in write(str) and write(buf, size) from Print +}; + +#if defined(UBRRH) || defined(UBRR0H) + extern HardwareSerial Serial; +#elif defined(USBCON) + #include "usb_api.h" +#endif +#if defined(UBRR1H) + extern HardwareSerial Serial1; +#endif +#if defined(UBRR2H) + extern HardwareSerial Serial2; +#endif +#if defined(UBRR3H) + extern HardwareSerial Serial3; +#endif + +#endif diff --git a/Marlin/Marlin/Boards/cores/arduino/Print.cpp b/Marlin/Marlin/Boards/cores/arduino/Print.cpp new file mode 100644 index 0000000000..6ee0b7af97 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/Print.cpp @@ -0,0 +1,220 @@ +/* + Print.cpp - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + */ + +#include +#include +#include +#include +#include "wiring.h" + +#include "Print.h" + +// Public Methods ////////////////////////////////////////////////////////////// + +/* default implementation: may be overridden */ +void Print::write(const char *str) +{ + while (*str) + write(*str++); +} + +/* default implementation: may be overridden */ +void Print::write(const uint8_t *buffer, size_t size) +{ + while (size--) + write(*buffer++); +} + +void Print::print(const String &s) +{ + for (int i = 0; i < s.length(); i++) { + write(s[i]); + } +} + +void Print::print(const char str[]) +{ + write(str); +} + +void Print::print(char c, int base) +{ + print((long) c, base); +} + +void Print::print(unsigned char b, int base) +{ + print((unsigned long) b, base); +} + +void Print::print(int n, int base) +{ + print((long) n, base); +} + +void Print::print(unsigned int n, int base) +{ + print((unsigned long) n, base); +} + +void Print::print(long n, int base) +{ + if (base == 0) { + write(n); + } else if (base == 10) { + if (n < 0) { + print('-'); + n = -n; + } + printNumber(n, 10); + } else { + printNumber(n, base); + } +} + +void Print::print(unsigned long n, int base) +{ + if (base == 0) write(n); + else printNumber(n, base); +} + +void Print::print(double n, int digits) +{ + printFloat(n, digits); +} + +void Print::println(void) +{ + print('\r'); + print('\n'); +} + +void Print::println(const String &s) +{ + print(s); + println(); +} + +void Print::println(const char c[]) +{ + print(c); + println(); +} + +void Print::println(char c, int base) +{ + print(c, base); + println(); +} + +void Print::println(unsigned char b, int base) +{ + print(b, base); + println(); +} + +void Print::println(int n, int base) +{ + print(n, base); + println(); +} + +void Print::println(unsigned int n, int base) +{ + print(n, base); + println(); +} + +void Print::println(long n, int base) +{ + print(n, base); + println(); +} + +void Print::println(unsigned long n, int base) +{ + print(n, base); + println(); +} + +void Print::println(double n, int digits) +{ + print(n, digits); + println(); +} + +// Private Methods ///////////////////////////////////////////////////////////// + +void Print::printNumber(unsigned long n, uint8_t base) +{ + unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars. + unsigned long i = 0; + + if (n == 0) { + print('0'); + return; + } + + while (n > 0) { + buf[i++] = n % base; + n /= base; + } + + for (; i > 0; i--) + print((char) (buf[i - 1] < 10 ? + '0' + buf[i - 1] : + 'A' + buf[i - 1] - 10)); +} + +void Print::printFloat(double number, uint8_t digits) +{ + // Handle negative numbers + if (number < 0.0) + { + print('-'); + number = -number; + } + + // Round correctly so that print(1.999, 2) prints as "2.00" + double rounding = 0.5; + for (uint8_t i=0; i 0) + print("."); + + // Extract digits from the remainder one at a time + while (digits-- > 0) + { + remainder *= 10.0; + int toPrint = int(remainder); + print(toPrint); + remainder -= toPrint; + } +} diff --git a/Marlin/Marlin/Boards/cores/arduino/Print.h b/Marlin/Marlin/Boards/cores/arduino/Print.h new file mode 100644 index 0000000000..e70fb18eb3 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/Print.h @@ -0,0 +1,77 @@ +/* + Print.h - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef Print_h +#define Print_h + +#include +#include // for size_t + +#include "WString.h" + +#define DEC 10 +#define HEX 16 +#define OCT 8 +#define BIN 2 +#define BYTE 0 + +class Print +{ + private: + void printNumber(unsigned long, uint8_t); + void printFloat(double, uint8_t); + public: + + // + // Drakelive 2012-09-04 + // + #if ARDUINO >= 100 + virtual size_t write(uint8_t) = 0; + #else + virtual void write(uint8_t) = 0; + #endif + + // Drakelive 2012-09-04 + + virtual void write(const char *str); + virtual void write(const uint8_t *buffer, size_t size); + + void print(const String &); + void print(const char[]); + void print(char, int = BYTE); + void print(unsigned char, int = BYTE); + void print(int, int = DEC); + void print(unsigned int, int = DEC); + void print(long, int = DEC); + void print(unsigned long, int = DEC); + void print(double, int = 2); + + void println(const String &s); + void println(const char[]); + void println(char, int = BYTE); + void println(unsigned char, int = BYTE); + void println(int, int = DEC); + void println(unsigned int, int = DEC); + void println(long, int = DEC); + void println(unsigned long, int = DEC); + void println(double, int = 2); + void println(void); +}; + +#endif diff --git a/Marlin/Marlin/Boards/cores/arduino/Stream.h b/Marlin/Marlin/Boards/cores/arduino/Stream.h new file mode 100644 index 0000000000..1be40ccdf1 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/Stream.h @@ -0,0 +1,35 @@ +/* + Stream.h - base class for character-based streams. + Copyright (c) 2010 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef Stream_h +#define Stream_h + +#include +#include "Print.h" + +class Stream : public Print +{ + public: + virtual int available() = 0; + virtual int read() = 0; + virtual int peek() = 0; + virtual void flush() = 0; +}; + +#endif diff --git a/Marlin/Marlin/Boards/cores/arduino/Tone.cpp b/Marlin/Marlin/Boards/cores/arduino/Tone.cpp new file mode 100644 index 0000000000..d6a856b2d2 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/Tone.cpp @@ -0,0 +1,601 @@ +/* Tone.cpp + + A Tone Generator Library + + Written by Brett Hagman + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Version Modified By Date Comments +------- ----------- -------- -------- +0001 B Hagman 09/08/02 Initial coding +0002 B Hagman 09/08/18 Multiple pins +0003 B Hagman 09/08/18 Moved initialization from constructor to begin() +0004 B Hagman 09/09/26 Fixed problems with ATmega8 +0005 B Hagman 09/11/23 Scanned prescalars for best fit on 8 bit timers + 09/11/25 Changed pin toggle method to XOR + 09/11/25 Fixed timer0 from being excluded +0006 D Mellis 09/12/29 Replaced objects with functions +0007 M Sproul 10/08/29 Changed #ifdefs from cpu to register +*************************************************/ + +#include +#include +#include "wiring.h" +#include "pins_arduino.h" + +#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__) +#define TCCR2A TCCR2 +#define TCCR2B TCCR2 +#define COM2A1 COM21 +#define COM2A0 COM20 +#define OCR2A OCR2 +#define TIMSK2 TIMSK +#define OCIE2A OCIE2 +#define TIMER2_COMPA_vect TIMER2_COMP_vect +#define TIMSK1 TIMSK +#endif + +// timerx_toggle_count: +// > 0 - duration specified +// = 0 - stopped +// < 0 - infinitely (until stop() method called, or new play() called) + +#if !defined(__AVR_ATmega8__) +volatile long timer0_toggle_count; +volatile uint8_t *timer0_pin_port; +volatile uint8_t timer0_pin_mask; +#endif + +volatile long timer1_toggle_count; +volatile uint8_t *timer1_pin_port; +volatile uint8_t timer1_pin_mask; +volatile long timer2_toggle_count; +volatile uint8_t *timer2_pin_port; +volatile uint8_t timer2_pin_mask; + +#if defined(TIMSK3) +volatile long timer3_toggle_count; +volatile uint8_t *timer3_pin_port; +volatile uint8_t timer3_pin_mask; +#endif + +#if defined(TIMSK4) +volatile long timer4_toggle_count; +volatile uint8_t *timer4_pin_port; +volatile uint8_t timer4_pin_mask; +#endif + +#if defined(TIMSK5) +volatile long timer5_toggle_count; +volatile uint8_t *timer5_pin_port; +volatile uint8_t timer5_pin_mask; +#endif + + +// MLS: This does not make sense, the 3 options are the same +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + +#define AVAILABLE_TONE_PINS 1 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 3, 4, 5, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255, 255, 255, 255 */ }; + +#elif defined(__AVR_ATmega8__) + +#define AVAILABLE_TONE_PINS 1 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ }; + +#else + +#define AVAILABLE_TONE_PINS 1 + +// Leave timer 0 to last. +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255 */ }; + +#endif + + + +static int8_t toneBegin(uint8_t _pin) +{ + int8_t _timer = -1; + + // if we're already using the pin, the timer should be configured. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + return pgm_read_byte(tone_pin_to_timer_PGM + i); + } + } + + // search for an unused timer. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == 255) { + tone_pins[i] = _pin; + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + break; + } + } + + if (_timer != -1) + { + // Set timer specific stuff + // All timers in CTC mode + // 8 bit timers will require changing prescalar values, + // whereas 16 bit timers are set to either ck/1 or ck/64 prescalar + switch (_timer) + { + #if defined(TCCR0A) && defined(TCCR0B) + case 0: + // 8 bit timer + TCCR0A = 0; + TCCR0B = 0; + bitWrite(TCCR0A, WGM01, 1); + bitWrite(TCCR0B, CS00, 1); + timer0_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer0_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR1A) && defined(TCCR1B) && defined(WGM12) + case 1: + // 16 bit timer + TCCR1A = 0; + TCCR1B = 0; + bitWrite(TCCR1B, WGM12, 1); + bitWrite(TCCR1B, CS10, 1); + timer1_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer1_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR2A) && defined(TCCR2B) + case 2: + // 8 bit timer + TCCR2A = 0; + TCCR2B = 0; + bitWrite(TCCR2A, WGM21, 1); + bitWrite(TCCR2B, CS20, 1); + timer2_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer2_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR3A) && defined(TCCR3B) && defined(TIMSK3) + case 3: + // 16 bit timer + TCCR3A = 0; + TCCR3B = 0; + bitWrite(TCCR3B, WGM32, 1); + bitWrite(TCCR3B, CS30, 1); + timer3_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer3_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR4A) && defined(TCCR4B) && defined(TIMSK4) + case 4: + // 16 bit timer + TCCR4A = 0; + TCCR4B = 0; + #if defined(WGM42) + bitWrite(TCCR4B, WGM42, 1); + #elif defined(CS43) + #warning this may not be correct + // atmega32u4 + bitWrite(TCCR4B, CS43, 1); + #endif + bitWrite(TCCR4B, CS40, 1); + timer4_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer4_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR5A) && defined(TCCR5B) && defined(TIMSK5) + case 5: + // 16 bit timer + TCCR5A = 0; + TCCR5B = 0; + bitWrite(TCCR5B, WGM52, 1); + bitWrite(TCCR5B, CS50, 1); + timer5_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer5_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + } + } + + return _timer; +} + + + +// frequency (in hertz) and duration (in milliseconds). + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration) +{ + uint8_t prescalarbits = 0b001; + long toggle_count = 0; + uint32_t ocr = 0; + int8_t _timer; + + _timer = toneBegin(_pin); + + if (_timer >= 0) + { + // Set the pinMode as OUTPUT + pinMode(_pin, OUTPUT); + + // if we are using an 8 bit timer, scan through prescalars to find the best fit + if (_timer == 0 || _timer == 2) + { + ocr = F_CPU / frequency / 2 - 1; + prescalarbits = 0b001; // ck/1: same for both timers + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 8 - 1; + prescalarbits = 0b010; // ck/8: same for both timers + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 32 - 1; + prescalarbits = 0b011; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = _timer == 0 ? 0b011 : 0b100; + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 128 - 1; + prescalarbits = 0b101; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 256 - 1; + prescalarbits = _timer == 0 ? 0b100 : 0b110; + if (ocr > 255) + { + // can't do any better than /1024 + ocr = F_CPU / frequency / 2 / 1024 - 1; + prescalarbits = _timer == 0 ? 0b101 : 0b111; + } + } + } + } + +#if defined(TCCR0B) + if (_timer == 0) + { + TCCR0B = prescalarbits; + } + else +#endif +#if defined(TCCR2B) + { + TCCR2B = prescalarbits; + } +#else + { + // dummy place holder to make the above ifdefs work + } +#endif + } + else + { + // two choices for the 16 bit timers: ck/1 or ck/64 + ocr = F_CPU / frequency / 2 - 1; + + prescalarbits = 0b001; + if (ocr > 0xffff) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = 0b011; + } + + if (_timer == 1) + { +#if defined(TCCR1B) + TCCR1B = (TCCR1B & 0b11111000) | prescalarbits; +#endif + } +#if defined(TCCR3B) + else if (_timer == 3) + TCCR3B = (TCCR3B & 0b11111000) | prescalarbits; +#endif +#if defined(TCCR4B) + else if (_timer == 4) + TCCR4B = (TCCR4B & 0b11111000) | prescalarbits; +#endif +#if defined(TCCR5B) + else if (_timer == 5) + TCCR5B = (TCCR5B & 0b11111000) | prescalarbits; +#endif + + } + + + // Calculate the toggle count + if (duration > 0) + { + toggle_count = 2 * frequency * duration / 1000; + } + else + { + toggle_count = -1; + } + + // Set the OCR for the given timer, + // set the toggle count, + // then turn on the interrupts + switch (_timer) + { + +#if defined(OCR0A) && defined(TIMSK0) && defined(OCIE0A) + case 0: + OCR0A = ocr; + timer0_toggle_count = toggle_count; + bitWrite(TIMSK0, OCIE0A, 1); + break; +#endif + + case 1: +#if defined(OCR1A) && defined(TIMSK1) && defined(OCIE1A) + OCR1A = ocr; + timer1_toggle_count = toggle_count; + bitWrite(TIMSK1, OCIE1A, 1); +#elif defined(OCR1A) && defined(TIMSK) && defined(OCIE1A) + // this combination is for at least the ATmega32 + OCR1A = ocr; + timer1_toggle_count = toggle_count; + bitWrite(TIMSK, OCIE1A, 1); +#endif + break; + +#if defined(OCR2A) && defined(TIMSK2) && defined(OCIE2A) + case 2: + OCR2A = ocr; + timer2_toggle_count = toggle_count; + bitWrite(TIMSK2, OCIE2A, 1); + break; +#endif + +#if defined(TIMSK3) + case 3: + OCR3A = ocr; + timer3_toggle_count = toggle_count; + bitWrite(TIMSK3, OCIE3A, 1); + break; +#endif + +#if defined(TIMSK4) + case 4: + OCR4A = ocr; + timer4_toggle_count = toggle_count; + bitWrite(TIMSK4, OCIE4A, 1); + break; +#endif + +#if defined(OCR5A) && defined(TIMSK5) && defined(OCIE5A) + case 5: + OCR5A = ocr; + timer5_toggle_count = toggle_count; + bitWrite(TIMSK5, OCIE5A, 1); + break; +#endif + + } + } +} + + +// XXX: this function only works properly for timer 2 (the only one we use +// currently). for the others, it should end the tone, but won't restore +// proper PWM functionality for the timer. +void disableTimer(uint8_t _timer) +{ + switch (_timer) + { + case 0: + #if defined(TIMSK0) + TIMSK0 = 0; + #elif defined(TIMSK) + TIMSK = 0; // atmega32 + #endif + break; + +#if defined(TIMSK1) && defined(OCIE1A) + case 1: + bitWrite(TIMSK1, OCIE1A, 0); + break; +#endif + + case 2: + #if defined(TIMSK2) && defined(OCIE2A) + bitWrite(TIMSK2, OCIE2A, 0); // disable interrupt + #endif + #if defined(TCCR2A) && defined(WGM20) + TCCR2A = (1 << WGM20); + #endif + #if defined(TCCR2B) && defined(CS22) + TCCR2B = (TCCR2B & 0b11111000) | (1 << CS22); + #endif + #if defined(OCR2A) + OCR2A = 0; + #endif + break; + +#if defined(TIMSK3) + case 3: + TIMSK3 = 0; + break; +#endif + +#if defined(TIMSK4) + case 4: + TIMSK4 = 0; + break; +#endif + +#if defined(TIMSK5) + case 5: + TIMSK5 = 0; + break; +#endif + } +} + + +void noTone(uint8_t _pin) +{ + int8_t _timer = -1; + + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + tone_pins[i] = 255; + } + } + + disableTimer(_timer); + + digitalWrite(_pin, 0); +} + +#if 0 +#if !defined(__AVR_ATmega8__) +ISR(TIMER0_COMPA_vect) +{ + if (timer0_toggle_count != 0) + { + // toggle the pin + *timer0_pin_port ^= timer0_pin_mask; + + if (timer0_toggle_count > 0) + timer0_toggle_count--; + } + else + { + disableTimer(0); + *timer0_pin_port &= ~(timer0_pin_mask); // keep pin low after stop + } +} +#endif + + +ISR(TIMER1_COMPA_vect) +{ + if (timer1_toggle_count != 0) + { + // toggle the pin + *timer1_pin_port ^= timer1_pin_mask; + + if (timer1_toggle_count > 0) + timer1_toggle_count--; + } + else + { + disableTimer(1); + *timer1_pin_port &= ~(timer1_pin_mask); // keep pin low after stop + } +} +#endif + + +ISR(TIMER2_COMPA_vect) +{ + + if (timer2_toggle_count != 0) + { + // toggle the pin + *timer2_pin_port ^= timer2_pin_mask; + + if (timer2_toggle_count > 0) + timer2_toggle_count--; + } + else + { + // need to call noTone() so that the tone_pins[] entry is reset, so the + // timer gets initialized next time we call tone(). + // XXX: this assumes timer 2 is always the first one used. + noTone(tone_pins[0]); +// disableTimer(2); +// *timer2_pin_port &= ~(timer2_pin_mask); // keep pin low after stop + } +} + + + +//#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#if 0 + +ISR(TIMER3_COMPA_vect) +{ + if (timer3_toggle_count != 0) + { + // toggle the pin + *timer3_pin_port ^= timer3_pin_mask; + + if (timer3_toggle_count > 0) + timer3_toggle_count--; + } + else + { + disableTimer(3); + *timer3_pin_port &= ~(timer3_pin_mask); // keep pin low after stop + } +} + +ISR(TIMER4_COMPA_vect) +{ + if (timer4_toggle_count != 0) + { + // toggle the pin + *timer4_pin_port ^= timer4_pin_mask; + + if (timer4_toggle_count > 0) + timer4_toggle_count--; + } + else + { + disableTimer(4); + *timer4_pin_port &= ~(timer4_pin_mask); // keep pin low after stop + } +} + +ISR(TIMER5_COMPA_vect) +{ + if (timer5_toggle_count != 0) + { + // toggle the pin + *timer5_pin_port ^= timer5_pin_mask; + + if (timer5_toggle_count > 0) + timer5_toggle_count--; + } + else + { + disableTimer(5); + *timer5_pin_port &= ~(timer5_pin_mask); // keep pin low after stop + } +} + +#endif diff --git a/Marlin/Marlin/Boards/cores/arduino/WCharacter.h b/Marlin/Marlin/Boards/cores/arduino/WCharacter.h new file mode 100644 index 0000000000..8b72828326 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/WCharacter.h @@ -0,0 +1,168 @@ +/* + WCharacter.h - Character utility functions for Wiring & Arduino + Copyright (c) 2010 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef Character_h +#define Character_h + +#include + +// WCharacter.h prototypes +inline boolean isAlphaNumeric(int c) __attribute__((always_inline)); +inline boolean isAlpha(int c) __attribute__((always_inline)); +inline boolean isAscii(int c) __attribute__((always_inline)); +inline boolean isWhitespace(int c) __attribute__((always_inline)); +inline boolean isControl(int c) __attribute__((always_inline)); +inline boolean isDigit(int c) __attribute__((always_inline)); +inline boolean isGraph(int c) __attribute__((always_inline)); +inline boolean isLowerCase(int c) __attribute__((always_inline)); +inline boolean isPrintable(int c) __attribute__((always_inline)); +inline boolean isPunct(int c) __attribute__((always_inline)); +inline boolean isSpace(int c) __attribute__((always_inline)); +inline boolean isUpperCase(int c) __attribute__((always_inline)); +inline boolean isHexadecimalDigit(int c) __attribute__((always_inline)); +inline int toAscii(int c) __attribute__((always_inline)); +inline int toLowerCase(int c) __attribute__((always_inline)); +inline int toUpperCase(int c)__attribute__((always_inline)); + + +// Checks for an alphanumeric character. +// It is equivalent to (isalpha(c) || isdigit(c)). +inline boolean isAlphaNumeric(int c) +{ + return ( isalnum(c) == 0 ? false : true); +} + + +// Checks for an alphabetic character. +// It is equivalent to (isupper(c) || islower(c)). +inline boolean isAlpha(int c) +{ + return ( isalpha(c) == 0 ? false : true); +} + + +// Checks whether c is a 7-bit unsigned char value +// that fits into the ASCII character set. +inline boolean isAscii(int c) +{ + return ( isascii (c) == 0 ? false : true); +} + + +// Checks for a blank character, that is, a space or a tab. +inline boolean isWhitespace(int c) +{ + return ( isblank (c) == 0 ? false : true); +} + + +// Checks for a control character. +inline boolean isControl(int c) +{ + return ( iscntrl (c) == 0 ? false : true); +} + + +// Checks for a digit (0 through 9). +inline boolean isDigit(int c) +{ + return ( isdigit (c) == 0 ? false : true); +} + + +// Checks for any printable character except space. +inline boolean isGraph(int c) +{ + return ( isgraph (c) == 0 ? false : true); +} + + +// Checks for a lower-case character. +inline boolean isLowerCase(int c) +{ + return (islower (c) == 0 ? false : true); +} + + +// Checks for any printable character including space. +inline boolean isPrintable(int c) +{ + return ( isprint (c) == 0 ? false : true); +} + + +// Checks for any printable character which is not a space +// or an alphanumeric character. +inline boolean isPunct(int c) +{ + return ( ispunct (c) == 0 ? false : true); +} + + +// Checks for white-space characters. For the avr-libc library, +// these are: space, formfeed ('\f'), newline ('\n'), carriage +// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v'). +inline boolean isSpace(int c) +{ + return ( isspace (c) == 0 ? false : true); +} + + +// Checks for an uppercase letter. +inline boolean isUpperCase(int c) +{ + return ( isupper (c) == 0 ? false : true); +} + + +// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7 +// 8 9 a b c d e f A B C D E F. +inline boolean isHexadecimalDigit(int c) +{ + return ( isxdigit (c) == 0 ? false : true); +} + + +// Converts c to a 7-bit unsigned char value that fits into the +// ASCII character set, by clearing the high-order bits. +inline int toAscii(int c) +{ + return toascii (c); +} + + +// Warning: +// Many people will be unhappy if you use this function. +// This function will convert accented letters into random +// characters. + +// Converts the letter c to lower case, if possible. +inline int toLowerCase(int c) +{ + return tolower (c); +} + + +// Converts the letter c to upper case, if possible. +inline int toUpperCase(int c) +{ + return toupper (c); +} + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/Boards/cores/arduino/WConstants.h b/Marlin/Marlin/Boards/cores/arduino/WConstants.h new file mode 100644 index 0000000000..5167caa42b --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/WConstants.h @@ -0,0 +1 @@ +#include "wiring.h" diff --git a/Marlin/Marlin/Boards/cores/arduino/WInterrupts.c b/Marlin/Marlin/Boards/cores/arduino/WInterrupts.c new file mode 100644 index 0000000000..bfbbfd38c0 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/WInterrupts.c @@ -0,0 +1,249 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.uniandes.edu.co + + Copyright (c) 2004-05 Hernando Barragan + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 24 November 2006 by David A. Mellis + Modified 1 August 2010 by Mark Sproul +*/ + +#include +#include +#include +#include +#include + +#include "WConstants.h" +#include "wiring_private.h" + +volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS]; +// volatile static voidFuncPtr twiIntFunc; + +void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) { + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) { + intFunc[interruptNum] = userFunc; + + // Configure the interrupt mode (trigger on low input, any change, rising + // edge, or falling edge). The mode constants were chosen to correspond + // to the configuration bits in the hardware register, so we simply shift + // the mode into place. + + // Enable the interrupt. + + switch (interruptNum) { +#if defined(EICRA) && defined(EICRB) && defined(EIMSK) + case 2: + EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + EIMSK |= (1 << INT0); + break; + case 3: + EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + EIMSK |= (1 << INT1); + break; + case 4: + EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20); + EIMSK |= (1 << INT2); + break; + case 5: + EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30); + EIMSK |= (1 << INT3); + break; + case 0: + EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40); + EIMSK |= (1 << INT4); + break; + case 1: + EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50); + EIMSK |= (1 << INT5); + break; + case 6: + EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60); + EIMSK |= (1 << INT6); + break; + case 7: + EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70); + EIMSK |= (1 << INT7); + break; +#else + case 0: + #if defined(EICRA) && defined(ISC00) && defined(EIMSK) + EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + EIMSK |= (1 << INT0); + #elif defined(MCUCR) && defined(ISC00) && defined(GICR) + MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + GICR |= (1 << INT0); + #elif defined(MCUCR) && defined(ISC00) && defined(GIMSK) + MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + GIMSK |= (1 << INT0); + #else + #error attachInterrupt not finished for this CPU (case 0) + #endif + break; + + case 1: + #if defined(EICRA) && defined(ISC10) && defined(ISC11) && defined(EIMSK) + EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + EIMSK |= (1 << INT1); + #elif defined(MCUCR) && defined(ISC10) && defined(ISC11) && defined(GICR) + MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + GICR |= (1 << INT1); + #elif defined(MCUCR) && defined(ISC10) && defined(GIMSK) && defined(GIMSK) + MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + GIMSK |= (1 << INT1); + #else + #warning attachInterrupt may need some more work for this cpu (case 1) + #endif + break; +#endif + } + } +} + +void detachInterrupt(uint8_t interruptNum) { + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) { + // Disable the interrupt. (We can't assume that interruptNum is equal + // to the number of the EIMSK bit to clear, as this isn't true on the + // ATmega8. There, INT0 is 6 and INT1 is 7.) + switch (interruptNum) { +#if defined(EICRA) && defined(EICRB) && defined(EIMSK) + case 2: + EIMSK &= ~(1 << INT0); + break; + case 3: + EIMSK &= ~(1 << INT1); + break; + case 4: + EIMSK &= ~(1 << INT2); + break; + case 5: + EIMSK &= ~(1 << INT3); + break; + case 0: + EIMSK &= ~(1 << INT4); + break; + case 1: + EIMSK &= ~(1 << INT5); + break; + case 6: + EIMSK &= ~(1 << INT6); + break; + case 7: + EIMSK &= ~(1 << INT7); + break; +#else + case 0: + #if defined(EIMSK) && defined(INT0) + EIMSK &= ~(1 << INT0); + #elif defined(GICR) && defined(ISC00) + GICR &= ~(1 << INT0); // atmega32 + #elif defined(GIMSK) && defined(INT0) + GIMSK &= ~(1 << INT0); + #else + #error detachInterrupt not finished for this cpu + #endif + break; + + case 1: + #if defined(EIMSK) && defined(INT1) + EIMSK &= ~(1 << INT1); + #elif defined(GICR) && defined(INT1) + GICR &= ~(1 << INT1); // atmega32 + #elif defined(GIMSK) && defined(INT1) + GIMSK &= ~(1 << INT1); + #else + #warning detachInterrupt may need some more work for this cpu (case 1) + #endif + break; +#endif + } + + intFunc[interruptNum] = 0; + } +} + +/* +void attachInterruptTwi(void (*userFunc)(void) ) { + twiIntFunc = userFunc; +} +*/ + +#if defined(EICRA) && defined(EICRB) + +SIGNAL(INT0_vect) { + if(intFunc[EXTERNAL_INT_2]) + intFunc[EXTERNAL_INT_2](); +} + +SIGNAL(INT1_vect) { + if(intFunc[EXTERNAL_INT_3]) + intFunc[EXTERNAL_INT_3](); +} + +SIGNAL(INT2_vect) { + if(intFunc[EXTERNAL_INT_4]) + intFunc[EXTERNAL_INT_4](); +} + +SIGNAL(INT3_vect) { + if(intFunc[EXTERNAL_INT_5]) + intFunc[EXTERNAL_INT_5](); +} + +SIGNAL(INT4_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +SIGNAL(INT5_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +SIGNAL(INT6_vect) { + if(intFunc[EXTERNAL_INT_6]) + intFunc[EXTERNAL_INT_6](); +} + +SIGNAL(INT7_vect) { + if(intFunc[EXTERNAL_INT_7]) + intFunc[EXTERNAL_INT_7](); +} + +#else + +SIGNAL(INT0_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +SIGNAL(INT1_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +#endif + +/* +SIGNAL(SIG_2WIRE_SERIAL) { + if(twiIntFunc) + twiIntFunc(); +} +*/ + diff --git a/Marlin/Marlin/Boards/cores/arduino/WMath.cpp b/Marlin/Marlin/Boards/cores/arduino/WMath.cpp new file mode 100644 index 0000000000..d4e258e932 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/WMath.cpp @@ -0,0 +1,60 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.org.co + Copyright (c) 2004-06 Hernando Barragan + Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/ + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +extern "C" { + #include "stdlib.h" +} + +void randomSeed(unsigned int seed) +{ + if (seed != 0) { + srandom(seed); + } +} + +long random(long howbig) +{ + if (howbig == 0) { + return 0; + } + return random() % howbig; +} + +long random(long howsmall, long howbig) +{ + if (howsmall >= howbig) { + return howsmall; + } + long diff = howbig - howsmall; + return random(diff) + howsmall; +} + +long map(long x, long in_min, long in_max, long out_min, long out_max) +{ + return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min; +} + +unsigned int makeWord(unsigned int w) { return w; } +unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; } \ No newline at end of file diff --git a/Marlin/Marlin/Boards/cores/arduino/WProgram.h b/Marlin/Marlin/Boards/cores/arduino/WProgram.h new file mode 100644 index 0000000000..68538312a1 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/WProgram.h @@ -0,0 +1,63 @@ +#ifndef WProgram_h +#define WProgram_h + +#include +#include +#include + +#include + +#include "wiring.h" + +#ifdef __cplusplus +#include "WCharacter.h" +#include "WString.h" +#include "HardwareSerial.h" + +uint16_t makeWord(uint16_t w); +uint16_t makeWord(byte h, byte l); + +#define word(...) makeWord(__VA_ARGS__) + +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); +void noTone(uint8_t _pin); + +// WMath prototypes +long random(long); +long random(long, long); +void randomSeed(unsigned int); +long map(long, long, long, long, long); + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +const static uint8_t A0 = 54; +const static uint8_t A1 = 55; +const static uint8_t A2 = 56; +const static uint8_t A3 = 57; +const static uint8_t A4 = 58; +const static uint8_t A5 = 59; +const static uint8_t A6 = 60; +const static uint8_t A7 = 61; +const static uint8_t A8 = 62; +const static uint8_t A9 = 63; +const static uint8_t A10 = 64; +const static uint8_t A11 = 65; +const static uint8_t A12 = 66; +const static uint8_t A13 = 67; +const static uint8_t A14 = 68; +const static uint8_t A15 = 69; +#else +const static uint8_t A0 = 14; +const static uint8_t A1 = 15; +const static uint8_t A2 = 16; +const static uint8_t A3 = 17; +const static uint8_t A4 = 18; +const static uint8_t A5 = 19; +const static uint8_t A6 = 20; +const static uint8_t A7 = 21; +#endif + +#endif + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/Boards/cores/arduino/WString.cpp b/Marlin/Marlin/Boards/cores/arduino/WString.cpp new file mode 100644 index 0000000000..ad9ba1c0af --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/WString.cpp @@ -0,0 +1,443 @@ +/* + WString.cpp - String library for Wiring & Arduino + Copyright (c) 2009-10 Hernando Barragan. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include +#include "WProgram.h" +#include "WString.h" + + +String::String( const char *value ) +{ + if ( value == NULL ) + value = ""; + getBuffer( _length = strlen( value ) ); + if ( _buffer != NULL ) + strcpy( _buffer, value ); +} + +String::String( const String &value ) +{ + getBuffer( _length = value._length ); + if ( _buffer != NULL ) + strcpy( _buffer, value._buffer ); +} + +String::String( const char value ) +{ + _length = 1; + getBuffer(1); + if ( _buffer != NULL ) { + _buffer[0] = value; + _buffer[1] = 0; + } +} + +String::String( const unsigned char value ) +{ + _length = 1; + getBuffer(1); + if ( _buffer != NULL) { + _buffer[0] = value; + _buffer[1] = 0; + } +} + +String::String( const int value, const int base ) +{ + char buf[33]; + itoa((signed long)value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const unsigned int value, const int base ) +{ + char buf[33]; + ultoa((unsigned long)value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const long value, const int base ) +{ + char buf[33]; + ltoa(value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const unsigned long value, const int base ) +{ + char buf[33]; + ultoa(value, buf, 10); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +char String::charAt( unsigned int loc ) const +{ + return operator[]( loc ); +} + +void String::setCharAt( unsigned int loc, const char aChar ) +{ + if(_buffer == NULL) return; + if(_length > loc) { + _buffer[loc] = aChar; + } +} + +int String::compareTo( const String &s2 ) const +{ + return strcmp( _buffer, s2._buffer ); +} + +const String & String::concat( const String &s2 ) +{ + return (*this) += s2; +} + +const String & String::operator=( const String &rhs ) +{ + if ( this == &rhs ) + return *this; + + if ( rhs._length > _length ) + { + free(_buffer); + getBuffer( rhs._length ); + } + + if ( _buffer != NULL ) { + _length = rhs._length; + strcpy( _buffer, rhs._buffer ); + } + return *this; +} + +//const String & String::operator+=( const char aChar ) +//{ +// if ( _length == _capacity ) +// doubleBuffer(); +// +// _buffer[ _length++ ] = aChar; +// _buffer[ _length ] = '\0'; +// return *this; +//} + +const String & String::operator+=( const String &other ) +{ + _length += other._length; + if ( _length > _capacity ) + { + char *temp = (char *)realloc(_buffer, _length + 1); + if ( temp != NULL ) { + _buffer = temp; + _capacity = _length; + } else { + _length -= other._length; + return *this; + } + } + strcat( _buffer, other._buffer ); + return *this; +} + + +int String::operator==( const String &rhs ) const +{ + return ( _length == rhs._length && strcmp( _buffer, rhs._buffer ) == 0 ); +} + +int String::operator!=( const String &rhs ) const +{ + return ( _length != rhs.length() || strcmp( _buffer, rhs._buffer ) != 0 ); +} + +int String::operator<( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) < 0; +} + +int String::operator>( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) > 0; +} + +int String::operator<=( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) <= 0; +} + +int String::operator>=( const String & rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) >= 0; +} + +char & String::operator[]( unsigned int index ) +{ + static char dummy_writable_char; + if (index >= _length || !_buffer) { + dummy_writable_char = 0; + return dummy_writable_char; + } + return _buffer[ index ]; +} + +char String::operator[]( unsigned int index ) const +{ + // need to check for valid index, to do later + return _buffer[ index ]; +} + +boolean String::endsWith( const String &s2 ) const +{ + if ( _length < s2._length ) + return 0; + + return strcmp( &_buffer[ _length - s2._length], s2._buffer ) == 0; +} + +boolean String::equals( const String &s2 ) const +{ + return ( _length == s2._length && strcmp( _buffer,s2._buffer ) == 0 ); +} + +boolean String::equalsIgnoreCase( const String &s2 ) const +{ + if ( this == &s2 ) + return true; //1; + else if ( _length != s2._length ) + return false; //0; + + return strcmp(toLowerCase()._buffer, s2.toLowerCase()._buffer) == 0; +} + +String String::replace( char findChar, char replaceChar ) +{ + if ( _buffer == NULL ) return *this; + String theReturn = _buffer; + char* temp = theReturn._buffer; + while( (temp = strchr( temp, findChar )) != 0 ) + *temp = replaceChar; + + return theReturn; +} + +String String::replace( const String& match, const String& replace ) +{ + if ( _buffer == NULL ) return *this; + String temp = _buffer, newString; + + int loc; + while ( (loc = temp.indexOf( match )) != -1 ) + { + newString += temp.substring( 0, loc ); + newString += replace; + temp = temp.substring( loc + match._length ); + } + newString += temp; + return newString; +} + +int String::indexOf( char temp ) const +{ + return indexOf( temp, 0 ); +} + +int String::indexOf( char ch, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + const char* temp = strchr( &_buffer[fromIndex], ch ); + if ( temp == NULL ) + return -1; + + return temp - _buffer; +} + +int String::indexOf( const String &s2 ) const +{ + return indexOf( s2, 0 ); +} + +int String::indexOf( const String &s2, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + const char *theFind = strstr( &_buffer[ fromIndex ], s2._buffer ); + + if ( theFind == NULL ) + return -1; + + return theFind - _buffer; // pointer subtraction +} + +int String::lastIndexOf( char theChar ) const +{ + return lastIndexOf( theChar, _length - 1 ); +} + +int String::lastIndexOf( char ch, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + char tempchar = _buffer[fromIndex + 1]; + _buffer[fromIndex + 1] = '\0'; + char* temp = strrchr( _buffer, ch ); + _buffer[fromIndex + 1] = tempchar; + + if ( temp == NULL ) + return -1; + + return temp - _buffer; +} + +int String::lastIndexOf( const String &s2 ) const +{ + return lastIndexOf( s2, _length - s2._length ); +} + +int String::lastIndexOf( const String &s2, unsigned int fromIndex ) const +{ + // check for empty strings + if ( s2._length == 0 || s2._length - 1 > fromIndex || fromIndex >= _length ) + return -1; + + // matching first character + char temp = s2[ 0 ]; + + for ( int i = fromIndex; i >= 0; i-- ) + { + if ( _buffer[ i ] == temp && (*this).substring( i, i + s2._length ).equals( s2 ) ) + return i; + } + return -1; +} + +boolean String::startsWith( const String &s2 ) const +{ + if ( _length < s2._length ) + return 0; + + return startsWith( s2, 0 ); +} + +boolean String::startsWith( const String &s2, unsigned int offset ) const +{ + if ( offset > _length - s2._length ) + return 0; + + return strncmp( &_buffer[offset], s2._buffer, s2._length ) == 0; +} + +String String::substring( unsigned int left ) const +{ + return substring( left, _length ); +} + +String String::substring( unsigned int left, unsigned int right ) const +{ + if ( left > right ) + { + int temp = right; + right = left; + left = temp; + } + + if ( right > _length ) + { + right = _length; + } + + char temp = _buffer[ right ]; // save the replaced character + _buffer[ right ] = '\0'; + String outPut = ( _buffer + left ); // pointer arithmetic + _buffer[ right ] = temp; //restore character + return outPut; +} + +String String::toLowerCase() const +{ + String temp = _buffer; + + for ( unsigned int i = 0; i < _length; i++ ) + temp._buffer[ i ] = (char)tolower( temp._buffer[ i ] ); + return temp; +} + +String String::toUpperCase() const +{ + String temp = _buffer; + + for ( unsigned int i = 0; i < _length; i++ ) + temp._buffer[ i ] = (char)toupper( temp._buffer[ i ] ); + return temp; +} + +String String::trim() const +{ + if ( _buffer == NULL ) return *this; + String temp = _buffer; + unsigned int i,j; + + for ( i = 0; i < _length; i++ ) + { + if ( !isspace(_buffer[i]) ) + break; + } + + for ( j = temp._length - 1; j > i; j-- ) + { + if ( !isspace(_buffer[j]) ) + break; + } + + return temp.substring( i, j + 1); +} + +void String::getBytes(unsigned char *buf, unsigned int bufsize) +{ + if (!bufsize || !buf) return; + unsigned int len = bufsize - 1; + if (len > _length) len = _length; + strncpy((char *)buf, _buffer, len); + buf[len] = 0; +} + +void String::toCharArray(char *buf, unsigned int bufsize) +{ + if (!bufsize || !buf) return; + unsigned int len = bufsize - 1; + if (len > _length) len = _length; + strncpy(buf, _buffer, len); + buf[len] = 0; +} + + +long String::toInt() { + return atol(_buffer); +} diff --git a/Marlin/Marlin/Boards/cores/arduino/WString.h b/Marlin/Marlin/Boards/cores/arduino/WString.h new file mode 100644 index 0000000000..88585e7a53 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/WString.h @@ -0,0 +1,112 @@ +/* + WString.h - String library for Wiring & Arduino + Copyright (c) 2009-10 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef String_h +#define String_h + +//#include "WProgram.h" +#include +#include +#include + +class String +{ + public: + // constructors + String( const char *value = "" ); + String( const String &value ); + String( const char ); + String( const unsigned char ); + String( const int, const int base=10); + String( const unsigned int, const int base=10 ); + String( const long, const int base=10 ); + String( const unsigned long, const int base=10 ); + ~String() { free(_buffer); _length = _capacity = 0;} //added _length = _capacity = 0; + + // operators + const String & operator = ( const String &rhs ); + const String & operator +=( const String &rhs ); + //const String & operator +=( const char ); + int operator ==( const String &rhs ) const; + int operator !=( const String &rhs ) const; + int operator < ( const String &rhs ) const; + int operator > ( const String &rhs ) const; + int operator <=( const String &rhs ) const; + int operator >=( const String &rhs ) const; + char operator []( unsigned int index ) const; + char& operator []( unsigned int index ); + //operator const char *() const { return _buffer; } + + // general methods + char charAt( unsigned int index ) const; + int compareTo( const String &anotherString ) const; + unsigned char endsWith( const String &suffix ) const; + unsigned char equals( const String &anObject ) const; + unsigned char equalsIgnoreCase( const String &anotherString ) const; + int indexOf( char ch ) const; + int indexOf( char ch, unsigned int fromIndex ) const; + int indexOf( const String &str ) const; + int indexOf( const String &str, unsigned int fromIndex ) const; + int lastIndexOf( char ch ) const; + int lastIndexOf( char ch, unsigned int fromIndex ) const; + int lastIndexOf( const String &str ) const; + int lastIndexOf( const String &str, unsigned int fromIndex ) const; + const unsigned int length( ) const { return _length; } + void setCharAt(unsigned int index, const char ch); + unsigned char startsWith( const String &prefix ) const; + unsigned char startsWith( const String &prefix, unsigned int toffset ) const; + String substring( unsigned int beginIndex ) const; + String substring( unsigned int beginIndex, unsigned int endIndex ) const; + String toLowerCase( ) const; + String toUpperCase( ) const; + String trim( ) const; + void getBytes(unsigned char *buf, unsigned int bufsize); + void toCharArray(char *buf, unsigned int bufsize); + long toInt( ); + const String& concat( const String &str ); + String replace( char oldChar, char newChar ); + String replace( const String& match, const String& replace ); + friend String operator + ( String lhs, const String &rhs ); + + protected: + char *_buffer; // the actual char array + unsigned int _capacity; // the array length minus one (for the '\0') + unsigned int _length; // the String length (not counting the '\0') + + void getBuffer(unsigned int maxStrLen); + + private: + +}; + +// allocate buffer space +inline void String::getBuffer(unsigned int maxStrLen) +{ + _capacity = maxStrLen; + _buffer = (char *) malloc(_capacity + 1); + if (_buffer == NULL) _length = _capacity = 0; +} + +inline String operator+( String lhs, const String &rhs ) +{ + return lhs += rhs; +} + + +#endif diff --git a/Marlin/Marlin/Boards/cores/arduino/binary.h b/Marlin/Marlin/Boards/cores/arduino/binary.h new file mode 100644 index 0000000000..815a0daa9d --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/binary.h @@ -0,0 +1,515 @@ +#ifndef Binary_h +#define Binary_h + +#define B0 0 +#define B00 0 +#define B000 0 +#define B0000 0 +#define B00000 0 +#define B000000 0 +#define B0000000 0 +#define B00000000 0 +#define B1 1 +#define B01 1 +#define B001 1 +#define B0001 1 +#define B00001 1 +#define B000001 1 +#define B0000001 1 +#define B00000001 1 +#define B10 2 +#define B010 2 +#define B0010 2 +#define B00010 2 +#define B000010 2 +#define B0000010 2 +#define B00000010 2 +#define B11 3 +#define B011 3 +#define B0011 3 +#define B00011 3 +#define B000011 3 +#define B0000011 3 +#define B00000011 3 +#define B100 4 +#define B0100 4 +#define B00100 4 +#define B000100 4 +#define B0000100 4 +#define B00000100 4 +#define B101 5 +#define B0101 5 +#define B00101 5 +#define B000101 5 +#define B0000101 5 +#define B00000101 5 +#define B110 6 +#define B0110 6 +#define B00110 6 +#define B000110 6 +#define B0000110 6 +#define B00000110 6 +#define B111 7 +#define B0111 7 +#define B00111 7 +#define B000111 7 +#define B0000111 7 +#define B00000111 7 +#define B1000 8 +#define B01000 8 +#define B001000 8 +#define B0001000 8 +#define B00001000 8 +#define B1001 9 +#define B01001 9 +#define B001001 9 +#define B0001001 9 +#define B00001001 9 +#define B1010 10 +#define B01010 10 +#define B001010 10 +#define B0001010 10 +#define B00001010 10 +#define B1011 11 +#define B01011 11 +#define B001011 11 +#define B0001011 11 +#define B00001011 11 +#define B1100 12 +#define B01100 12 +#define B001100 12 +#define B0001100 12 +#define B00001100 12 +#define B1101 13 +#define B01101 13 +#define B001101 13 +#define B0001101 13 +#define B00001101 13 +#define B1110 14 +#define B01110 14 +#define B001110 14 +#define B0001110 14 +#define B00001110 14 +#define B1111 15 +#define B01111 15 +#define B001111 15 +#define B0001111 15 +#define B00001111 15 +#define B10000 16 +#define B010000 16 +#define B0010000 16 +#define B00010000 16 +#define B10001 17 +#define B010001 17 +#define B0010001 17 +#define B00010001 17 +#define B10010 18 +#define B010010 18 +#define B0010010 18 +#define B00010010 18 +#define B10011 19 +#define B010011 19 +#define B0010011 19 +#define B00010011 19 +#define B10100 20 +#define B010100 20 +#define B0010100 20 +#define B00010100 20 +#define B10101 21 +#define B010101 21 +#define B0010101 21 +#define B00010101 21 +#define B10110 22 +#define B010110 22 +#define B0010110 22 +#define B00010110 22 +#define B10111 23 +#define B010111 23 +#define B0010111 23 +#define B00010111 23 +#define B11000 24 +#define B011000 24 +#define B0011000 24 +#define B00011000 24 +#define B11001 25 +#define B011001 25 +#define B0011001 25 +#define B00011001 25 +#define B11010 26 +#define B011010 26 +#define B0011010 26 +#define B00011010 26 +#define B11011 27 +#define B011011 27 +#define B0011011 27 +#define B00011011 27 +#define B11100 28 +#define B011100 28 +#define B0011100 28 +#define B00011100 28 +#define B11101 29 +#define B011101 29 +#define B0011101 29 +#define B00011101 29 +#define B11110 30 +#define B011110 30 +#define B0011110 30 +#define B00011110 30 +#define B11111 31 +#define B011111 31 +#define B0011111 31 +#define B00011111 31 +#define B100000 32 +#define B0100000 32 +#define B00100000 32 +#define B100001 33 +#define B0100001 33 +#define B00100001 33 +#define B100010 34 +#define B0100010 34 +#define B00100010 34 +#define B100011 35 +#define B0100011 35 +#define B00100011 35 +#define B100100 36 +#define B0100100 36 +#define B00100100 36 +#define B100101 37 +#define B0100101 37 +#define B00100101 37 +#define B100110 38 +#define B0100110 38 +#define B00100110 38 +#define B100111 39 +#define B0100111 39 +#define B00100111 39 +#define B101000 40 +#define B0101000 40 +#define B00101000 40 +#define B101001 41 +#define B0101001 41 +#define B00101001 41 +#define B101010 42 +#define B0101010 42 +#define B00101010 42 +#define B101011 43 +#define B0101011 43 +#define B00101011 43 +#define B101100 44 +#define B0101100 44 +#define B00101100 44 +#define B101101 45 +#define B0101101 45 +#define B00101101 45 +#define B101110 46 +#define B0101110 46 +#define B00101110 46 +#define B101111 47 +#define B0101111 47 +#define B00101111 47 +#define B110000 48 +#define B0110000 48 +#define B00110000 48 +#define B110001 49 +#define B0110001 49 +#define B00110001 49 +#define B110010 50 +#define B0110010 50 +#define B00110010 50 +#define B110011 51 +#define B0110011 51 +#define B00110011 51 +#define B110100 52 +#define B0110100 52 +#define B00110100 52 +#define B110101 53 +#define B0110101 53 +#define B00110101 53 +#define B110110 54 +#define B0110110 54 +#define B00110110 54 +#define B110111 55 +#define B0110111 55 +#define B00110111 55 +#define B111000 56 +#define B0111000 56 +#define B00111000 56 +#define B111001 57 +#define B0111001 57 +#define B00111001 57 +#define B111010 58 +#define B0111010 58 +#define B00111010 58 +#define B111011 59 +#define B0111011 59 +#define B00111011 59 +#define B111100 60 +#define B0111100 60 +#define B00111100 60 +#define B111101 61 +#define B0111101 61 +#define B00111101 61 +#define B111110 62 +#define B0111110 62 +#define B00111110 62 +#define B111111 63 +#define B0111111 63 +#define B00111111 63 +#define B1000000 64 +#define B01000000 64 +#define B1000001 65 +#define B01000001 65 +#define B1000010 66 +#define B01000010 66 +#define B1000011 67 +#define B01000011 67 +#define B1000100 68 +#define B01000100 68 +#define B1000101 69 +#define B01000101 69 +#define B1000110 70 +#define B01000110 70 +#define B1000111 71 +#define B01000111 71 +#define B1001000 72 +#define B01001000 72 +#define B1001001 73 +#define B01001001 73 +#define B1001010 74 +#define B01001010 74 +#define B1001011 75 +#define B01001011 75 +#define B1001100 76 +#define B01001100 76 +#define B1001101 77 +#define B01001101 77 +#define B1001110 78 +#define B01001110 78 +#define B1001111 79 +#define B01001111 79 +#define B1010000 80 +#define B01010000 80 +#define B1010001 81 +#define B01010001 81 +#define B1010010 82 +#define B01010010 82 +#define B1010011 83 +#define B01010011 83 +#define B1010100 84 +#define B01010100 84 +#define B1010101 85 +#define B01010101 85 +#define B1010110 86 +#define B01010110 86 +#define B1010111 87 +#define B01010111 87 +#define B1011000 88 +#define B01011000 88 +#define B1011001 89 +#define B01011001 89 +#define B1011010 90 +#define B01011010 90 +#define B1011011 91 +#define B01011011 91 +#define B1011100 92 +#define B01011100 92 +#define B1011101 93 +#define B01011101 93 +#define B1011110 94 +#define B01011110 94 +#define B1011111 95 +#define B01011111 95 +#define B1100000 96 +#define B01100000 96 +#define B1100001 97 +#define B01100001 97 +#define B1100010 98 +#define B01100010 98 +#define B1100011 99 +#define B01100011 99 +#define B1100100 100 +#define B01100100 100 +#define B1100101 101 +#define B01100101 101 +#define B1100110 102 +#define B01100110 102 +#define B1100111 103 +#define B01100111 103 +#define B1101000 104 +#define B01101000 104 +#define B1101001 105 +#define B01101001 105 +#define B1101010 106 +#define B01101010 106 +#define B1101011 107 +#define B01101011 107 +#define B1101100 108 +#define B01101100 108 +#define B1101101 109 +#define B01101101 109 +#define B1101110 110 +#define B01101110 110 +#define B1101111 111 +#define B01101111 111 +#define B1110000 112 +#define B01110000 112 +#define B1110001 113 +#define B01110001 113 +#define B1110010 114 +#define B01110010 114 +#define B1110011 115 +#define B01110011 115 +#define B1110100 116 +#define B01110100 116 +#define B1110101 117 +#define B01110101 117 +#define B1110110 118 +#define B01110110 118 +#define B1110111 119 +#define B01110111 119 +#define B1111000 120 +#define B01111000 120 +#define B1111001 121 +#define B01111001 121 +#define B1111010 122 +#define B01111010 122 +#define B1111011 123 +#define B01111011 123 +#define B1111100 124 +#define B01111100 124 +#define B1111101 125 +#define B01111101 125 +#define B1111110 126 +#define B01111110 126 +#define B1111111 127 +#define B01111111 127 +#define B10000000 128 +#define B10000001 129 +#define B10000010 130 +#define B10000011 131 +#define B10000100 132 +#define B10000101 133 +#define B10000110 134 +#define B10000111 135 +#define B10001000 136 +#define B10001001 137 +#define B10001010 138 +#define B10001011 139 +#define B10001100 140 +#define B10001101 141 +#define B10001110 142 +#define B10001111 143 +#define B10010000 144 +#define B10010001 145 +#define B10010010 146 +#define B10010011 147 +#define B10010100 148 +#define B10010101 149 +#define B10010110 150 +#define B10010111 151 +#define B10011000 152 +#define B10011001 153 +#define B10011010 154 +#define B10011011 155 +#define B10011100 156 +#define B10011101 157 +#define B10011110 158 +#define B10011111 159 +#define B10100000 160 +#define B10100001 161 +#define B10100010 162 +#define B10100011 163 +#define B10100100 164 +#define B10100101 165 +#define B10100110 166 +#define B10100111 167 +#define B10101000 168 +#define B10101001 169 +#define B10101010 170 +#define B10101011 171 +#define B10101100 172 +#define B10101101 173 +#define B10101110 174 +#define B10101111 175 +#define B10110000 176 +#define B10110001 177 +#define B10110010 178 +#define B10110011 179 +#define B10110100 180 +#define B10110101 181 +#define B10110110 182 +#define B10110111 183 +#define B10111000 184 +#define B10111001 185 +#define B10111010 186 +#define B10111011 187 +#define B10111100 188 +#define B10111101 189 +#define B10111110 190 +#define B10111111 191 +#define B11000000 192 +#define B11000001 193 +#define B11000010 194 +#define B11000011 195 +#define B11000100 196 +#define B11000101 197 +#define B11000110 198 +#define B11000111 199 +#define B11001000 200 +#define B11001001 201 +#define B11001010 202 +#define B11001011 203 +#define B11001100 204 +#define B11001101 205 +#define B11001110 206 +#define B11001111 207 +#define B11010000 208 +#define B11010001 209 +#define B11010010 210 +#define B11010011 211 +#define B11010100 212 +#define B11010101 213 +#define B11010110 214 +#define B11010111 215 +#define B11011000 216 +#define B11011001 217 +#define B11011010 218 +#define B11011011 219 +#define B11011100 220 +#define B11011101 221 +#define B11011110 222 +#define B11011111 223 +#define B11100000 224 +#define B11100001 225 +#define B11100010 226 +#define B11100011 227 +#define B11100100 228 +#define B11100101 229 +#define B11100110 230 +#define B11100111 231 +#define B11101000 232 +#define B11101001 233 +#define B11101010 234 +#define B11101011 235 +#define B11101100 236 +#define B11101101 237 +#define B11101110 238 +#define B11101111 239 +#define B11110000 240 +#define B11110001 241 +#define B11110010 242 +#define B11110011 243 +#define B11110100 244 +#define B11110101 245 +#define B11110110 246 +#define B11110111 247 +#define B11111000 248 +#define B11111001 249 +#define B11111010 250 +#define B11111011 251 +#define B11111100 252 +#define B11111101 253 +#define B11111110 254 +#define B11111111 255 + +#endif diff --git a/Marlin/Marlin/Boards/cores/arduino/main.cpp b/Marlin/Marlin/Boards/cores/arduino/main.cpp new file mode 100644 index 0000000000..3c19f6f36f --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/main.cpp @@ -0,0 +1,14 @@ +#include + +int main(void) +{ + init(); + + setup(); + + for (;;) + loop(); + + return 0; +} + diff --git a/Marlin/Marlin/Boards/cores/arduino/pins_arduino.c b/Marlin/Marlin/Boards/cores/arduino/pins_arduino.c new file mode 100644 index 0000000000..63f38a41b2 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/pins_arduino.c @@ -0,0 +1,200 @@ +/* + pins_arduino.c - pin definitions for the Arduino board + Part of Arduino / Wiring Lite + + Copyright (c) 2005 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: pins_arduino.c 254 2007-04-20 23:17:38Z mellis $ +*/ + +#include +#include "wiring_private.h" +#include "pins_arduino.h" + +// On the Sanguino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA644P / SANGUINO +// +// +---\/---+ +// INT0 (D 0) PB0 1| |40 PA0 (AI 0 / D31) +// INT1 (D 1) PB1 2| |39 PA1 (AI 1 / D30) +// INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) +// PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) +// PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) +// MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) +// MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) +// SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) +// RST 9| |32 AREF +// VCC 10| |31 GND +// GND 11| |30 AVCC +// XTAL2 12| |29 PC7 (D 23) +// XTAL1 13| |28 PC6 (D 22) +// RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI +// TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO +// RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS +// TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK +// PWM (D 12) PD4 18| |23 PC1 (D 17) SDA +// PWM (D 13) PD5 19| |22 PC0 (D 16) SCL +// PWM (D 14) PD6 20| |21 PD7 (D 15) PWM +// +--------+ +// + +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint8_t PROGMEM port_to_mode_PGM[] = +{ + NOT_A_PORT, + (uint8_t) (uint16_t) &DDRA, + (uint8_t) (uint16_t) &DDRB, + (uint8_t) (uint16_t) &DDRC, + (uint8_t) (uint16_t) &DDRD, +}; + +const uint8_t PROGMEM port_to_output_PGM[] = +{ + NOT_A_PORT, + (uint8_t) (uint16_t) &PORTA, + (uint8_t) (uint16_t) &PORTB, + (uint8_t) (uint16_t) &PORTC, + (uint8_t) (uint16_t) &PORTD, +}; + +const uint8_t PROGMEM port_to_input_PGM[] = +{ + NOT_A_PORT, + (uint8_t) (uint16_t) &PINA, + (uint8_t) (uint16_t) &PINB, + (uint8_t) (uint16_t) &PINC, + (uint8_t) (uint16_t) &PIND, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = +{ + PB, /* 0 */ + PB, + PB, + PB, + PB, + PB, + PB, + PB, + PD, /* 8 */ + PD, + PD, + PD, + PD, + PD, + PD, + PD, + PC, /* 16 */ + PC, + PC, + PC, + PC, + PC, + PC, + PC, + PA, /* 24 */ + PA, + PA, + PA, + PA, + PA, + PA, + PA /* 31 */ +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = +{ + _BV(0), /* 0, port B */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 8, port D */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 16, port C */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(7), /* 24, port A */ + _BV(6), + _BV(5), + _BV(4), + _BV(3), + _BV(2), + _BV(1), + _BV(0) +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = +{ + NOT_ON_TIMER, /* 0 - PB0 */ + NOT_ON_TIMER, /* 1 - PB1 */ + NOT_ON_TIMER, /* 2 - PB2 */ + TIMER0A, /* 3 - PB3 */ + TIMER0B, /* 4 - PB4 */ + NOT_ON_TIMER, /* 5 - PB5 */ + NOT_ON_TIMER, /* 6 - PB6 */ + NOT_ON_TIMER, /* 7 - PB7 */ + NOT_ON_TIMER, /* 8 - PD0 */ + NOT_ON_TIMER, /* 9 - PD1 */ + NOT_ON_TIMER, /* 10 - PD2 */ + NOT_ON_TIMER, /* 11 - PD3 */ + TIMER1B, /* 12 - PD4 */ + TIMER1A, /* 13 - PD5 */ + TIMER2B, /* 14 - PD6 */ + TIMER2A, /* 15 - PD7 */ + NOT_ON_TIMER, /* 16 - PC0 */ + NOT_ON_TIMER, /* 17 - PC1 */ + NOT_ON_TIMER, /* 18 - PC2 */ + NOT_ON_TIMER, /* 19 - PC3 */ + NOT_ON_TIMER, /* 20 - PC4 */ + NOT_ON_TIMER, /* 21 - PC5 */ + NOT_ON_TIMER, /* 22 - PC6 */ + NOT_ON_TIMER, /* 23 - PC7 */ + NOT_ON_TIMER, /* 24 - PA0 */ + NOT_ON_TIMER, /* 25 - PA1 */ + NOT_ON_TIMER, /* 26 - PA2 */ + NOT_ON_TIMER, /* 27 - PA3 */ + NOT_ON_TIMER, /* 28 - PA4 */ + NOT_ON_TIMER, /* 29 - PA5 */ + NOT_ON_TIMER, /* 30 - PA6 */ + NOT_ON_TIMER /* 31 - PA7 */ +}; diff --git a/Marlin/Marlin/Boards/cores/arduino/pins_arduino.h b/Marlin/Marlin/Boards/cores/arduino/pins_arduino.h new file mode 100644 index 0000000000..4b44cda611 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/pins_arduino.h @@ -0,0 +1,65 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define NOT_A_PIN 0 +#define NOT_A_PORT 0 + +#define NOT_ON_TIMER 0 +#define TIMER0A 1 +#define TIMER0B 2 +#define TIMER1A 3 +#define TIMER1B 4 +#define TIMER2 5 +#define TIMER2A 6 +#define TIMER2B 7 + +extern const uint8_t PROGMEM port_to_mode_PGM[]; +extern const uint8_t PROGMEM port_to_input_PGM[]; +extern const uint8_t PROGMEM port_to_output_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. +// +// These perform slightly better as macros compared to inline functions +// +#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) +#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) +#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) +#define analogInPinToBit(P) (P) +#define portOutputRegister(P) ( (volatile uint8_t *)( (uint16_t) pgm_read_byte( port_to_output_PGM + (P))) ) +#define portInputRegister(P) ( (volatile uint8_t *)( (uint16_t) pgm_read_byte( port_to_input_PGM + (P))) ) +#define portModeRegister(P) ( (volatile uint8_t *)( (uint16_t) pgm_read_byte( port_to_mode_PGM + (P))) ) + +#endif diff --git a/Marlin/Marlin/Boards/cores/arduino/wiring.c b/Marlin/Marlin/Boards/cores/arduino/wiring.c new file mode 100644 index 0000000000..5b247584cb --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/wiring.c @@ -0,0 +1,289 @@ +/* + wiring.c - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#include "wiring_private.h" + +// the prescaler is set so that timer0 ticks every 64 clock cycles, and the +// the overflow handler is called every 256 ticks. +#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256)) + +// the whole number of milliseconds per timer0 overflow +#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000) + +// the fractional number of milliseconds per timer0 overflow. we shift right +// by three to fit these numbers into a byte. (for the clock speeds we care +// about - 8 and 16 MHz - this doesn't lose precision.) +#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3) +#define FRACT_MAX (1000 >> 3) + +volatile unsigned long timer0_overflow_count = 0; +volatile unsigned long timer0_millis = 0; +static unsigned char timer0_fract = 0; + +SIGNAL(TIMER0_OVF_vect) +{ + // copy these to local variables so they can be stored in registers + // (volatile variables must be read from memory on every access) + unsigned long m = timer0_millis; + unsigned char f = timer0_fract; + + m += MILLIS_INC; + f += FRACT_INC; + if (f >= FRACT_MAX) { + f -= FRACT_MAX; + m += 1; + } + + timer0_fract = f; + timer0_millis = m; + timer0_overflow_count++; +} + +unsigned long millis() +{ + unsigned long m; + uint8_t oldSREG = SREG; + + // disable interrupts while we read timer0_millis or we might get an + // inconsistent value (e.g. in the middle of a write to timer0_millis) + cli(); + m = timer0_millis; + SREG = oldSREG; + + return m; +} + +unsigned long micros() { + unsigned long m; + uint8_t oldSREG = SREG, t; + + cli(); + m = timer0_overflow_count; +#if defined(TCNT0) + t = TCNT0; +#elif defined(TCNT0L) + t = TCNT0L; +#else + #error TIMER 0 not defined +#endif + + +#ifdef TIFR0 + if ((TIFR0 & _BV(TOV0)) && (t < 255)) + m++; +#else + if ((TIFR & _BV(TOV0)) && (t < 255)) + m++; +#endif + + SREG = oldSREG; + + return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond()); +} + +void delay(unsigned long ms) +{ + uint16_t start = (uint16_t)micros(); + + while (ms > 0) { + if (((uint16_t)micros() - start) >= 1000) { + ms--; + start += 1000; + } + } +} + +/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. */ +void delayMicroseconds(unsigned int us) +{ + // calling avrlib's delay_us() function with low values (e.g. 1 or + // 2 microseconds) gives delays longer than desired. + //delay_us(us); + +#if F_CPU >= 16000000L + // for the 16 MHz clock on most Arduino boards + + // for a one-microsecond delay, simply return. the overhead + // of the function call yields a delay of approximately 1 1/8 us. + if (--us == 0) + return; + + // the following loop takes a quarter of a microsecond (4 cycles) + // per iteration, so execute it four times for each microsecond of + // delay requested. + us <<= 2; + + // account for the time taken in the preceeding commands. + us -= 2; +#else + // for the 8 MHz internal clock on the ATmega168 + + // for a one- or two-microsecond delay, simply return. the overhead of + // the function calls takes more than two microseconds. can't just + // subtract two, since us is unsigned; we'd overflow. + if (--us == 0) + return; + if (--us == 0) + return; + + // the following loop takes half of a microsecond (4 cycles) + // per iteration, so execute it twice for each microsecond of + // delay requested. + us <<= 1; + + // partially compensate for the time taken by the preceeding commands. + // we can't subtract any more than this or we'd overflow w/ small delays. + us--; +#endif + + // busy wait + __asm__ __volatile__ ( + "1: sbiw %0,1" "\n\t" // 2 cycles + "brne 1b" : "=w" (us) : "0" (us) // 2 cycles + ); +} + +void init() +{ + // this needs to be called before setup() or some functions won't + // work there + sei(); + + // on the ATmega168, timer 0 is also used for fast hardware pwm + // (using phase-correct PWM would mean that timer 0 overflowed half as often + // resulting in different millis() behavior on the ATmega8 and ATmega168) +#if defined(TCCR0A) && defined(WGM01) + sbi(TCCR0A, WGM01); + sbi(TCCR0A, WGM00); +#endif + + // set timer 0 prescale factor to 64 +#if defined(__AVR_ATmega128__) + // CPU specific: different values for the ATmega128 + sbi(TCCR0, CS02); +#elif defined(TCCR0) && defined(CS01) && defined(CS00) + // this combination is for the standard atmega8 + sbi(TCCR0, CS01); + sbi(TCCR0, CS00); +#elif defined(TCCR0B) && defined(CS01) && defined(CS00) + // this combination is for the standard 168/328/1280/2560 + sbi(TCCR0B, CS01); + sbi(TCCR0B, CS00); +#elif defined(TCCR0A) && defined(CS01) && defined(CS00) + // this combination is for the __AVR_ATmega645__ series + sbi(TCCR0A, CS01); + sbi(TCCR0A, CS00); +#else + #error Timer 0 prescale factor 64 not set correctly +#endif + + // enable timer 0 overflow interrupt +#if defined(TIMSK) && defined(TOIE0) + sbi(TIMSK, TOIE0); +#elif defined(TIMSK0) && defined(TOIE0) + sbi(TIMSK0, TOIE0); +#else + #error Timer 0 overflow interrupt not set correctly +#endif + + // timers 1 and 2 are used for phase-correct hardware pwm + // this is better for motors as it ensures an even waveform + // note, however, that fast pwm mode can achieve a frequency of up + // 8 MHz (with a 16 MHz clock) at 50% duty cycle + + TCCR1B = 0; + + // set timer 1 prescale factor to 64 +#if defined(TCCR1B) && defined(CS11) && defined(CS10) + sbi(TCCR1B, CS11); + sbi(TCCR1B, CS10); +#elif defined(TCCR1) && defined(CS11) && defined(CS10) + sbi(TCCR1, CS11); + sbi(TCCR1, CS10); +#endif + // put timer 1 in 8-bit phase correct pwm mode +#if defined(TCCR1A) && defined(WGM10) + sbi(TCCR1A, WGM10); +#elif defined(TCCR1) + #warning this needs to be finished +#endif + + // set timer 2 prescale factor to 64 +#if defined(TCCR2) && defined(CS22) + sbi(TCCR2, CS22); +#elif defined(TCCR2B) && defined(CS22) + sbi(TCCR2B, CS22); +#else + #warning Timer 2 not finished (may not be present on this CPU) +#endif + + // configure timer 2 for phase correct pwm (8-bit) +#if defined(TCCR2) && defined(WGM20) + sbi(TCCR2, WGM20); +#elif defined(TCCR2A) && defined(WGM20) + sbi(TCCR2A, WGM20); +#else + #warning Timer 2 not finished (may not be present on this CPU) +#endif + +#if defined(TCCR3B) && defined(CS31) && defined(WGM30) + sbi(TCCR3B, CS31); // set timer 3 prescale factor to 64 + sbi(TCCR3B, CS30); + sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode +#endif + +#if defined(TCCR4B) && defined(CS41) && defined(WGM40) + sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64 + sbi(TCCR4B, CS40); + sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode +#endif + +#if defined(TCCR5B) && defined(CS51) && defined(WGM50) + sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64 + sbi(TCCR5B, CS50); + sbi(TCCR5A, WGM50); // put timer 5 in 8-bit phase correct pwm mode +#endif + +#if defined(ADCSRA) + // set a2d prescale factor to 128 + // 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range. + // XXX: this will not work properly for other clock speeds, and + // this code should use F_CPU to determine the prescale factor. + sbi(ADCSRA, ADPS2); + sbi(ADCSRA, ADPS1); + sbi(ADCSRA, ADPS0); + + // enable a2d conversions + sbi(ADCSRA, ADEN); +#endif + + // the bootloader connects pins 0 and 1 to the USART; disconnect them + // here so they can be used as normal digital i/o; they will be + // reconnected in Serial.begin() +#if defined(UCSRB) + UCSRB = 0; +#elif defined(UCSR0B) + UCSR0B = 0; +#endif +} diff --git a/Marlin/Marlin/Boards/cores/arduino/wiring.h b/Marlin/Marlin/Boards/cores/arduino/wiring.h new file mode 100644 index 0000000000..cec8f0508f --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/wiring.h @@ -0,0 +1,136 @@ +/* + wiring.h - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#ifndef Wiring_h +#define Wiring_h + +#include +#include +#include +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 + +#define true 0x1 +#define false 0x0 + +#define PI 3.1415926535897932384626433832795 +#define HALF_PI 1.5707963267948966192313216916398 +#define TWO_PI 6.283185307179586476925286766559 +#define DEG_TO_RAD 0.017453292519943295769236907684886 +#define RAD_TO_DEG 57.295779513082320876798154814105 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define INTERNAL1V1 2 +#define INTERNAL2V56 3 +#else +#define INTERNAL 3 +#endif +#define DEFAULT 1 +#define EXTERNAL 0 + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (F_CPU / 1000L) ) +#define microsecondsToClockCycles(a) ( ((a) * (F_CPU / 1000L)) / 1000L ) + +#define lowByte(w) ((uint8_t) ((w) & 0xff)) +#define highByte(w) ((uint8_t) ((w) >> 8)) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + + +typedef unsigned int word; + +#define bit(b) (1UL << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/Marlin/Boards/cores/arduino/wiring_analog.c b/Marlin/Marlin/Boards/cores/arduino/wiring_analog.c new file mode 100644 index 0000000000..735b0bded9 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/wiring_analog.c @@ -0,0 +1,259 @@ +/* + wiring_analog.c - analog input and output + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 28 September 2010 by Mark Sproul + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +uint8_t analog_reference = DEFAULT; + +void analogReference(uint8_t mode) +{ + // can't actually set the register here because the default setting + // will connect AVCC and the AREF pin, which would cause a short if + // there's something connected to AREF. + analog_reference = mode; +} + +int analogRead(uint8_t pin) +{ + uint8_t low, high; + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + if (pin >= 54) pin -= 54; // allow for channel or pin numbers +#else + if (pin >= 14) pin -= 14; // allow for channel or pin numbers +#endif + +#if defined(ADCSRB) && defined(MUX5) + // the MUX5 bit of ADCSRB selects whether we're reading from channels + // 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high). + ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5); +#endif + + // set the analog reference (high two bits of ADMUX) and select the + // channel (low 4 bits). this also sets ADLAR (left-adjust result) + // to 0 (the default). +#if defined(ADMUX) + ADMUX = (analog_reference << 6) | (pin & 0x07); +#endif + + // without a delay, we seem to read from the wrong channel + //delay(1); + +#if defined(ADCSRA) && defined(ADCL) + // start the conversion + sbi(ADCSRA, ADSC); + + // ADSC is cleared when the conversion finishes + while (bit_is_set(ADCSRA, ADSC)); + + // we have to read ADCL first; doing so locks both ADCL + // and ADCH until ADCH is read. reading ADCL second would + // cause the results of each conversion to be discarded, + // as ADCL and ADCH would be locked when it completed. + low = ADCL; + high = ADCH; +#else + // we dont have an ADC, return 0 + low = 0; + high = 0; +#endif + + // combine the two bytes + return (high << 8) | low; +} + +// Right now, PWM output only works on the pins with +// hardware support. These are defined in the appropriate +// pins_*.c file. For the rest of the pins, we default +// to digital output. +void analogWrite(uint8_t pin, int val) +{ + // We need to make sure the PWM output is enabled for those pins + // that support it, as we turn it off when digitally reading or + // writing with them. Also, make sure the pin is in output mode + // for consistenty with Wiring, which doesn't require a pinMode + // call for the analog output pins. + pinMode(pin, OUTPUT); + if (val == 0) + { + digitalWrite(pin, LOW); + } + else if (val == 255) + { + digitalWrite(pin, HIGH); + } + else + { + switch(digitalPinToTimer(pin)) + { + // XXX fix needed for atmega8 + #if defined(TCCR0) && defined(COM00) && !defined(__AVR_ATmega8__) + case TIMER0A: + // connect pwm to pin on timer 0 + sbi(TCCR0, COM00); + OCR0 = val; // set pwm duty + break; + #endif + + #if defined(TCCR0A) && defined(COM0A1) + case TIMER0A: + // connect pwm to pin on timer 0, channel A + sbi(TCCR0A, COM0A1); + OCR0A = val; // set pwm duty + break; + #endif + + #if defined(TCCR0A) && defined(COM0B1) + case TIMER0B: + // connect pwm to pin on timer 0, channel B + sbi(TCCR0A, COM0B1); + OCR0B = val; // set pwm duty + break; + #endif + + #if defined(TCCR1A) && defined(COM1A1) + case TIMER1A: + // connect pwm to pin on timer 1, channel A + sbi(TCCR1A, COM1A1); + OCR1A = val; // set pwm duty + break; + #endif + + #if defined(TCCR1A) && defined(COM1B1) + case TIMER1B: + // connect pwm to pin on timer 1, channel B + sbi(TCCR1A, COM1B1); + OCR1B = val; // set pwm duty + break; + #endif + + #if defined(TCCR2) && defined(COM21) + case TIMER2: + // connect pwm to pin on timer 2 + sbi(TCCR2, COM21); + OCR2 = val; // set pwm duty + break; + #endif + + #if defined(TCCR2A) && defined(COM2A1) + case TIMER2A: + // connect pwm to pin on timer 2, channel A + sbi(TCCR2A, COM2A1); + OCR2A = val; // set pwm duty + break; + #endif + + #if defined(TCCR2A) && defined(COM2B1) + case TIMER2B: + // connect pwm to pin on timer 2, channel B + sbi(TCCR2A, COM2B1); + OCR2B = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3A1) + case TIMER3A: + // connect pwm to pin on timer 3, channel A + sbi(TCCR3A, COM3A1); + OCR3A = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3B1) + case TIMER3B: + // connect pwm to pin on timer 3, channel B + sbi(TCCR3A, COM3B1); + OCR3B = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3C1) + case TIMER3C: + // connect pwm to pin on timer 3, channel C + sbi(TCCR3A, COM3C1); + OCR3C = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4A1) + case TIMER4A: + // connect pwm to pin on timer 4, channel A + sbi(TCCR4A, COM4A1); + OCR4A = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4B1) + case TIMER4B: + // connect pwm to pin on timer 4, channel B + sbi(TCCR4A, COM4B1); + OCR4B = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4C1) + case TIMER4C: + // connect pwm to pin on timer 4, channel C + sbi(TCCR4A, COM4C1); + OCR4C = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5A1) + case TIMER5A: + // connect pwm to pin on timer 5, channel A + sbi(TCCR5A, COM5A1); + OCR5A = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5B1) + case TIMER5B: + // connect pwm to pin on timer 5, channel B + sbi(TCCR5A, COM5B1); + OCR5B = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5C1) + case TIMER5C: + // connect pwm to pin on timer 5, channel C + sbi(TCCR5A, COM5C1); + OCR5C = val; // set pwm duty + break; + #endif + + case NOT_ON_TIMER: + default: + if (val < 128) { + digitalWrite(pin, LOW); + } else { + digitalWrite(pin, HIGH); + } + } + } +} diff --git a/Marlin/Marlin/Boards/cores/arduino/wiring_digital.c b/Marlin/Marlin/Boards/cores/arduino/wiring_digital.c new file mode 100644 index 0000000000..f6b7146ae8 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/wiring_digital.c @@ -0,0 +1,166 @@ +/* + wiring_digital.c - digital input and output functions + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 28 September 2010 by Mark Sproul + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +void pinMode(uint8_t pin, uint8_t mode) +{ + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *reg; + + if (port == NOT_A_PIN) return; + + // JWS: can I let the optimizer do this? + reg = portModeRegister(port); + + if (mode == INPUT) { + uint8_t oldSREG = SREG; + cli(); + *reg &= ~bit; + SREG = oldSREG; + } else { + uint8_t oldSREG = SREG; + cli(); + *reg |= bit; + SREG = oldSREG; + } +} + +// Forcing this inline keeps the callers from having to push their own stuff +// on the stack. It is a good performance win and only takes 1 more byte per +// user than calling. (It will take more bytes on the 168.) +// +// But shouldn't this be moved into pinMode? Seems silly to check and do on +// each digitalread or write. +// +// Mark Sproul: +// - Removed inline. Save 170 bytes on atmega1280 +// - changed to a switch statment; added 32 bytes but much easier to read and maintain. +// - Added more #ifdefs, now compiles for atmega645 +// +//static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline)); +//static inline void turnOffPWM(uint8_t timer) +static void turnOffPWM(uint8_t timer) +{ + switch (timer) + { + #if defined(TCCR1A) && defined(COM1A1) + case TIMER1A: cbi(TCCR1A, COM1A1); break; + #endif + #if defined(TCCR1A) && defined(COM1B1) + case TIMER1B: cbi(TCCR1A, COM1B1); break; + #endif + + #if defined(TCCR2) && defined(COM21) + case TIMER2: cbi(TCCR2, COM21); break; + #endif + + #if defined(TCCR0A) && defined(COM0A1) + case TIMER0A: cbi(TCCR0A, COM0A1); break; + #endif + + #if defined(TIMER0B) && defined(COM0B1) + case TIMER0B: cbi(TCCR0A, COM0B1); break; + #endif + #if defined(TCCR2A) && defined(COM2A1) + case TIMER2A: cbi(TCCR2A, COM2A1); break; + #endif + #if defined(TCCR2A) && defined(COM2B1) + case TIMER2B: cbi(TCCR2A, COM2B1); break; + #endif + + #if defined(TCCR3A) && defined(COM3A1) + case TIMER3A: cbi(TCCR3A, COM3A1); break; + #endif + #if defined(TCCR3A) && defined(COM3B1) + case TIMER3B: cbi(TCCR3A, COM3B1); break; + #endif + #if defined(TCCR3A) && defined(COM3C1) + case TIMER3C: cbi(TCCR3A, COM3C1); break; + #endif + + #if defined(TCCR4A) && defined(COM4A1) + case TIMER4A: cbi(TCCR4A, COM4A1); break; + #endif + #if defined(TCCR4A) && defined(COM4B1) + case TIMER4B: cbi(TCCR4A, COM4B1); break; + #endif + #if defined(TCCR4A) && defined(COM4C1) + case TIMER4C: cbi(TCCR4A, COM4C1); break; + #endif + #if defined(TCCR5A) + case TIMER5A: cbi(TCCR5A, COM5A1); break; + case TIMER5B: cbi(TCCR5A, COM5B1); break; + case TIMER5C: cbi(TCCR5A, COM5C1); break; + #endif + } +} + +void digitalWrite(uint8_t pin, uint8_t val) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *out; + + if (port == NOT_A_PIN) return; + + // If the pin that support PWM output, we need to turn it off + // before doing a digital write. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + out = portOutputRegister(port); + + if (val == LOW) { + uint8_t oldSREG = SREG; + cli(); + *out &= ~bit; + SREG = oldSREG; + } else { + uint8_t oldSREG = SREG; + cli(); + *out |= bit; + SREG = oldSREG; + } +} + +int digitalRead(uint8_t pin) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + + if (port == NOT_A_PIN) return LOW; + + // If the pin that support PWM output, we need to turn it off + // before getting a digital reading. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + if (*portInputRegister(port) & bit) return HIGH; + return LOW; +} diff --git a/Marlin/Marlin/Boards/cores/arduino/wiring_private.h b/Marlin/Marlin/Boards/cores/arduino/wiring_private.h new file mode 100644 index 0000000000..94035748e1 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/wiring_private.h @@ -0,0 +1,68 @@ +/* + wiring_private.h - Internal header file. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $ +*/ + +#ifndef WiringPrivate_h +#define WiringPrivate_h +#include +#include +#include +#include +#include +#include + +#include "wiring.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +#define EXTERNAL_INT_0 0 +#define EXTERNAL_INT_1 1 +#define EXTERNAL_INT_2 2 +#define EXTERNAL_INT_3 3 +#define EXTERNAL_INT_4 4 +#define EXTERNAL_INT_5 5 +#define EXTERNAL_INT_6 6 +#define EXTERNAL_INT_7 7 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define EXTERNAL_NUM_INTERRUPTS 8 +#else +#define EXTERNAL_NUM_INTERRUPTS 2 +#endif + +typedef void (*voidFuncPtr)(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/Marlin/Boards/cores/arduino/wiring_pulse.c b/Marlin/Marlin/Boards/cores/arduino/wiring_pulse.c new file mode 100644 index 0000000000..64ec799d1e --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/wiring_pulse.c @@ -0,0 +1,69 @@ +/* + wiring_pulse.c - pulseIn() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH + * or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds + * to 3 minutes in length, but must be called at least a few dozen microseconds + * before the start of the pulse. */ +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout) +{ + // cache the port and bit of the pin in order to speed up the + // pulse width measuring loop and achieve finer resolution. calling + // digitalRead() instead yields much coarser resolution. + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + uint8_t stateMask = (state ? bit : 0); + unsigned long width = 0; // keep initialization out of time critical area + + // convert the timeout from microseconds to a number of times through + // the initial loop; it takes 16 clock cycles per iteration. + unsigned long numloops = 0; + unsigned long maxloops = microsecondsToClockCycles(timeout) / 16; + + // wait for any previous pulse to end + while ((*portInputRegister(port) & bit) == stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to start + while ((*portInputRegister(port) & bit) != stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to stop + while ((*portInputRegister(port) & bit) == stateMask) { + if (numloops++ == maxloops) + return 0; + width++; + } + + // convert the reading to microseconds. The loop has been determined + // to be 20 clock cycles long and have about 16 clocks between the edge + // and the start of the loop. There will be some error introduced by + // the interrupt handlers. + return clockCyclesToMicroseconds(width * 21 + 16); +} diff --git a/Marlin/Marlin/Boards/cores/arduino/wiring_shift.c b/Marlin/Marlin/Boards/cores/arduino/wiring_shift.c new file mode 100644 index 0000000000..b18b634037 --- /dev/null +++ b/Marlin/Marlin/Boards/cores/arduino/wiring_shift.c @@ -0,0 +1,55 @@ +/* + wiring_shift.c - shiftOut() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" + +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder) { + uint8_t value = 0; + uint8_t i; + + for (i = 0; i < 8; ++i) { + digitalWrite(clockPin, HIGH); + if (bitOrder == LSBFIRST) + value |= digitalRead(dataPin) << i; + else + value |= digitalRead(dataPin) << (7 - i); + digitalWrite(clockPin, LOW); + } + return value; +} + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val) +{ + uint8_t i; + + for (i = 0; i < 8; i++) { + if (bitOrder == LSBFIRST) + digitalWrite(dataPin, !!(val & (1 << i))); + else + digitalWrite(dataPin, !!(val & (1 << (7 - i)))); + + digitalWrite(clockPin, HIGH); + digitalWrite(clockPin, LOW); + } +} diff --git a/Marlin/Marlin/COPYING b/Marlin/Marlin/COPYING new file mode 100644 index 0000000000..2b194fadc4 --- /dev/null +++ b/Marlin/Marlin/COPYING @@ -0,0 +1,188 @@ +GNU GENERAL PUBLIC LICENSE + +Version 3, 29 June 2007 + +Copyright © 2007 Free Software Foundation, Inc. + +Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. +Preamble + +The GNU General Public License is a free, copyleft license for software and other kinds of works. + +The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. + +When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. + +To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. + +For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. + +Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. + +For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. + +Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. + +Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. + +The precise terms and conditions for copying, distribution and modification follow. +TERMS AND CONDITIONS +0. Definitions. + +“This License” refers to version 3 of the GNU General Public License. + +“Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. + +“The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations. + +To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a “modified version” of the earlier work or a work “based on” the earlier work. + +A “covered work” means either the unmodified Program or a work based on the Program. + +To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. + +To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. + +An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. +1. Source Code. + +The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any non-source form of a work. + +A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. + +The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. + +The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. + +The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. + +The Corresponding Source for a work in source code form is that same work. +2. Basic Permissions. + +All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. + +You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. + +Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. +3. Protecting Users' Legal Rights From Anti-Circumvention Law. + +No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. + +When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. +4. Conveying Verbatim Copies. + +You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. + +You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. +5. Conveying Modified Source Versions. + +You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified it, and giving a relevant date. + b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”. + c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. + d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. + +A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. +6. Conveying Non-Source Forms. + +You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: + + a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. + b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. + c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. + d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. + e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. + +A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. + +A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product. + +“Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. + +If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). + +The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. + +Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. +7. Additional Terms. + +“Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. + +When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. + +Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or + b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or + c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or + d) Limiting the use for publicity purposes of names of licensors or authors of the material; or + e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or + f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. + +All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. + +If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. + +Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. +8. Termination. + +You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). + +However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. + +Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. + +Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. +9. Acceptance Not Required for Having Copies. + +You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. +10. Automatic Licensing of Downstream Recipients. + +Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. + +An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. + +You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. +11. Patents. + +A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's “contributor version”. + +A contributor's “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, “control” includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. + +Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. + +In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To “grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. + +If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. + +If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. + +A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. + +Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. +12. No Surrender of Others' Freedom. + +If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. +13. Use with the GNU Affero General Public License. + +Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. +14. Revised Versions of this License. + +The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. + +If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program. + +Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. +15. Disclaimer of Warranty. + +THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. +16. Limitation of Liability. + +IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. +17. Interpretation of Sections 15 and 16. + +If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. + diff --git a/Marlin/Marlin/Configuration.h b/Marlin/Marlin/Configuration.h new file mode 100644 index 0000000000..0ec06316f8 --- /dev/null +++ b/Marlin/Marlin/Configuration.h @@ -0,0 +1,294 @@ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H + +// This configurtion file contains the basic settings. +// Advanced settings can be found in Configuration_adv.h +// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + +//User specified version info of THIS file to display in [Pronterface, etc] terminal window during startup. +//Implementation of an idea by Prof Braino to inform user that any changes made +//to THIS file by the user have been successfully uploaded into firmware. +#define STRING_VERSION_CONFIG_H "2012-05-02" //Personal revision number for changes to THIS file. +#define STRING_CONFIG_H_AUTHOR "erik" //Who made the changes. + +// This determines the communication speed of the printer +#define BAUDRATE 250000 +//#define BAUDRATE 115200 + +//// The following define selects which electronics board you have. Please choose the one that matches your setup +// Gen7 custom (Alfons3 Version) = 10 "https://github.com/Alfons3/Generation_7_Electronics" +// Gen7 v1.1, v1.2 = 11 +// Gen7 v1.3 = 12 +// Gen7 v1.4 = 13 +// MEGA/RAMPS up to 1.2 = 3 +// RAMPS 1.3 = 33 (Power outputs: Extruder, Bed, Fan) +// RAMPS 1.3 = 34 (Power outputs: Extruder0, Extruder1, Bed) +// Gen6 = 5 +// Gen6 deluxe = 51 +// Sanguinololu 1.2 and above = 62 +// Melzi = 63 +// Ultimaker = 7 +// Teensylu = 8 +// Gen3+ =9 + +#ifndef MOTHERBOARD +#define MOTHERBOARD 7 +#endif + + + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== +// +//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table +// +//// Temperature sensor settings: +// -2 is thermocouple with MAX6675 (only for sensor 0) +// -1 is thermocouple with AD595 +// 0 is not used +// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup) +// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) +// 3 is mendel-parts thermistor (4.7k pullup) +// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! +// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan) (4.7k pullup) +// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) +// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) +// +// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k +// (but gives greater accuracy and more stable PID) +// 51 is 100k thermistor - EPCOS (1k pullup) +// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup) +// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup) + +#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_BED 0 + +// Actual temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the recidency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define BED_MAXTEMP 150 + +// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the +// average current. The value should be an integer and the heat bed will be turned on for 1 interval of +// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. +//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 + +// PID settings: +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define PID_MAX 255 // limits current to nozzle; 255=full current +#ifdef PIDTEMP + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104 sets the output power in % + #define PID_INTEGRAL_DRIVE_MAX 255 //limit for the integral term + #define K1 0.95 //smoothing factor withing the PID + #define PID_dT ((16.0 * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the + +// If you are using a preconfigured hotend then you can use one of the value sets by uncommenting it +// Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + +// Makergear +// #define DEFAULT_Kp 7.0 +// #define DEFAULT_Ki 0.1 +// #define DEFAULT_Kd 12 + +// Mendel Parts V9 on 12V +// #define DEFAULT_Kp 63.0 +// #define DEFAULT_Ki 2.25 +// #define DEFAULT_Kd 440 +#endif // PIDTEMP + +//this prevents dangerous Extruder moves, i.e. if the temperature is under the limit +//can be software-disabled for whatever purposes by +#define PREVENT_DANGEROUS_EXTRUDE +//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately. +#define PREVENT_LENGTHY_EXTRUDE + +#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances. + +//=========================================================================== +//=============================Mechanical Settings=========================== +//=========================================================================== + +// Uncomment the following line to enable CoreXY kinematics +// #define COREXY + +// corse Endstop Settings +#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors + +#ifndef ENDSTOPPULLUPS + // fine Enstop settings: Individual Pullups. will be ignord if ENDSTOPPULLUPS is defined + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN +#endif + +#ifdef ENDSTOPPULLUPS + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_ZMIN +#endif + +// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. +const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. +const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. +const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. +//#define DISABLE_MAX_ENDSTOPS + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis when it's not being used. +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +#define DISABLE_E false // For all extruders + +#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true +#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false +#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true +#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false + +// ENDSTOP SETTINGS: +// Sets direction of endstops when homing; 1=MAX, -1=MIN +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +#define min_software_endstops true //If true, axis won't move to coordinates less than HOME_POS. +#define max_software_endstops true //If true, axis won't move to coordinates greater than the defined lengths below. +// Travel limits after homing +#define X_MAX_POS 205 +#define X_MIN_POS 0 +#define Y_MAX_POS 205 +#define Y_MIN_POS 0 +#define Z_MAX_POS 200 +#define Z_MIN_POS 0 + +#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS) +#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS) +#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) + +// The position of the homing switches. Use MAX_LENGTH * -0.5 if the center should be 0, 0, 0 +#define X_HOME_POS 0 +#define Y_HOME_POS 0 +#define Z_HOME_POS 0 + +//// MOVEMENT SETTINGS +#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E +#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) + +// default settings + +#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200*8/3,760*1.1} // default steps per unit for ultimaker +#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 45} // (mm/sec) +#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot. + +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for r retracts + +// +#define DEFAULT_XYJERK 20.0 // (mm/sec) +#define DEFAULT_ZJERK 0.4 // (mm/sec) +#define DEFAULT_EJERK 5.0 // (mm/sec) + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +// EEPROM +// the microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores paramters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +//define this to enable eeprom support +//#define EEPROM_SETTINGS +//to disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out: +// please keep turned on if you can. +//#define EEPROM_CHITCHAT + +//LCD and SD support +//#define ULTRA_LCD //general lcd support, also 16x2 +//#define SDSUPPORT // Enable SD Card Support in Hardware Console + +//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store. +//#define ULTIPANEL //the ultipanel as on thingiverse + + +#ifdef ULTIMAKERCONTROLLER //automatic expansion + #define ULTIPANEL + #define NEWPANEL +#endif + + +#ifdef ULTIPANEL +// #define NEWPANEL //enable this if you have a click-encoder panel + #define SDSUPPORT + #define ULTRA_LCD + #define LCD_WIDTH 20 + #define LCD_HEIGHT 4 + +// Preheat Constants + #define PLA_PREHEAT_HOTEND_TEMP 180 + #define PLA_PREHEAT_HPB_TEMP 70 + #define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 + + #define ABS_PREHEAT_HOTEND_TEMP 240 + #define ABS_PREHEAT_HPB_TEMP 100 + #define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 + +#else //no panel but just lcd + #ifdef ULTRA_LCD + #define LCD_WIDTH 16 + #define LCD_HEIGHT 2 + #endif +#endif + +// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +// #define PHOTOGRAPH_PIN 23 + +// SF send wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +#include "Configuration_adv.h" +#include "thermistortables.h" + +#endif //__CONFIGURATION_H diff --git a/Marlin/Marlin/Configuration_adv.h b/Marlin/Marlin/Configuration_adv.h new file mode 100644 index 0000000000..0182c9375a --- /dev/null +++ b/Marlin/Marlin/Configuration_adv.h @@ -0,0 +1,263 @@ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// Select one of these only to define how the bed temp is read. +// +//#define BED_LIMIT_SWITCHING +#ifdef BED_LIMIT_SWITCHING + #define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS +#endif +#define BED_CHECK_INTERVAL 5000 //ms + +//// Heating sanity check: +// This waits for the watchperiod in milliseconds whenever an M104 or M109 increases the target temperature +// If the temperature has not increased at the end of that period, the target temperature is set to zero. +// It can be reset with another M104/M109 +//#define WATCHPERIOD 20000 //20 seconds + +// Wait for Cooldown +// This defines if the M109 call should not block if it is cooling down. +// example: From a current temp of 220, you set M109 S200. +// if CooldownNoWait is defined M109 will not wait for the cooldown to finish +#define CooldownNoWait true + +#ifdef PIDTEMP + // this adds an experimental additional term to the heatingpower, proportional to the extrusion speed. + // if Kc is choosen well, the additional required power due to increased melting should be compensated. + #define PID_ADD_EXTRUSION_RATE + #ifdef PID_ADD_EXTRUSION_RATE + #define DEFAULT_Kc (1) //heatingpower=Kc*(e_speed) + #endif +#endif + + +//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode. +//The maximum buffered steps/sec of the extruder motor are called "se". +//You enter the autotemp mode by a M109 S T F +// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp +// you exit the value by any M109 without F* +// Also, if the temperature is set to a value 0 + #define THERMISTORHEATER_0 TEMP_SENSOR_0 + #define HEATER_0_USES_THERMISTOR +#endif +#if TEMP_SENSOR_1 > 0 + #define THERMISTORHEATER_1 TEMP_SENSOR_1 + #define HEATER_1_USES_THERMISTOR +#endif +#if TEMP_SENSOR_2 > 0 + #define THERMISTORHEATER_2 TEMP_SENSOR_2 + #define HEATER_2_USES_THERMISTOR +#endif +#if TEMP_SENSOR_BED > 0 + #define THERMISTORBED TEMP_SENSOR_BED + #define BED_USES_THERMISTOR +#endif +#if TEMP_SENSOR_0 == -1 + #define HEATER_0_USES_AD595 +#endif +#if TEMP_SENSOR_1 == -1 + #define HEATER_1_USES_AD595 +#endif +#if TEMP_SENSOR_2 == -1 + #define HEATER_2_USES_AD595 +#endif +#if TEMP_SENSOR_BED == -1 + #define BED_USES_AD595 +#endif +#if TEMP_SENSOR_0 == -2 + #define HEATER_0_USES_MAX6675 +#endif +#if TEMP_SENSOR_0 == 0 + #undef HEATER_0_MINTEMP + #undef HEATER_0_MAXTEMP +#endif +#if TEMP_SENSOR_1 == 0 + #undef HEATER_1_MINTEMP + #undef HEATER_1_MAXTEMP +#endif +#if TEMP_SENSOR_2 == 0 + #undef HEATER_2_MINTEMP + #undef HEATER_2_MAXTEMP +#endif +#if TEMP_SENSOR_BED == 0 + #undef BED_MINTEMP + #undef BED_MAXTEMP +#endif + + +#endif //__CONFIGURATION_ADV_H diff --git a/Marlin/Marlin/EEPROMwrite.h b/Marlin/Marlin/EEPROMwrite.h new file mode 100644 index 0000000000..12674ef000 --- /dev/null +++ b/Marlin/Marlin/EEPROMwrite.h @@ -0,0 +1,232 @@ +#ifndef EEPROM_H +#define EEPROM_H + +#include "Marlin.h" +#include "planner.h" +#include "temperature.h" +//#include + +int plaPreheatHotendTemp; +int plaPreheatHPBTemp; +int plaPreheatFanSpeed; + +int absPreheatHotendTemp; +int absPreheatHPBTemp; +int absPreheatFanSpeed; + +template int EEPROM_writeAnything(int &ee, const T& value) +{ + const byte* p = (const byte*)(const void*)&value; + int i; + for (i = 0; i < (int)sizeof(value); i++) + eeprom_write_byte((unsigned char *)ee++, *p++); + return i; +} + +template int EEPROM_readAnything(int &ee, T& value) +{ + byte* p = (byte*)(void*)&value; + int i; + for (i = 0; i < (int)sizeof(value); i++) + *p++ = eeprom_read_byte((unsigned char *)ee++); + return i; +} +//====================================================================================== + + + + +#define EEPROM_OFFSET 100 + + +// IMPORTANT: Whenever there are changes made to the variables stored in EEPROM +// in the functions below, also increment the version number. This makes sure that +// the default values are used whenever there is a change to the data, to prevent +// wrong data being written to the variables. +// ALSO: always make sure the variables in the Store and retrieve sections are in the same order. +#define EEPROM_VERSION "V07" + +inline void EEPROM_StoreSettings() +{ +#ifdef EEPROM_SETTINGS + char ver[4]= "000"; + int i=EEPROM_OFFSET; + EEPROM_writeAnything(i,ver); // invalidate data first + EEPROM_writeAnything(i,axis_steps_per_unit); + EEPROM_writeAnything(i,max_feedrate); + EEPROM_writeAnything(i,max_acceleration_units_per_sq_second); + EEPROM_writeAnything(i,acceleration); + EEPROM_writeAnything(i,retract_acceleration); + EEPROM_writeAnything(i,minimumfeedrate); + EEPROM_writeAnything(i,mintravelfeedrate); + EEPROM_writeAnything(i,minsegmenttime); + EEPROM_writeAnything(i,max_xy_jerk); + EEPROM_writeAnything(i,max_z_jerk); + EEPROM_writeAnything(i,max_e_jerk); + EEPROM_writeAnything(i,add_homeing); + EEPROM_writeAnything(i,plaPreheatHotendTemp); + EEPROM_writeAnything(i,plaPreheatHPBTemp); + EEPROM_writeAnything(i,plaPreheatFanSpeed); + EEPROM_writeAnything(i,absPreheatHotendTemp); + EEPROM_writeAnything(i,absPreheatHPBTemp); + EEPROM_writeAnything(i,absPreheatFanSpeed); + #ifdef PIDTEMP + EEPROM_writeAnything(i,Kp); + EEPROM_writeAnything(i,Ki); + EEPROM_writeAnything(i,Kd); + #else + EEPROM_writeAnything(i,3000); + EEPROM_writeAnything(i,0); + EEPROM_writeAnything(i,0); + #endif + char ver2[4]=EEPROM_VERSION; + i=EEPROM_OFFSET; + EEPROM_writeAnything(i,ver2); // validate data + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Settings Stored"); +#endif //EEPROM_SETTINGS +} + + +inline void EEPROM_printSettings() +{ // if def=true, the default values will be used +// #ifdef EEPROM_SETTINGS + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Steps per unit:"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M92 X",axis_steps_per_unit[0]); + SERIAL_ECHOPAIR(" Y",axis_steps_per_unit[1]); + SERIAL_ECHOPAIR(" Z",axis_steps_per_unit[2]); + SERIAL_ECHOPAIR(" E",axis_steps_per_unit[3]); + SERIAL_ECHOLN(""); + + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Maximum feedrates (mm/s):"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M203 X",max_feedrate[0]); + SERIAL_ECHOPAIR(" Y",max_feedrate[1] ); + SERIAL_ECHOPAIR(" Z", max_feedrate[2] ); + SERIAL_ECHOPAIR(" E", max_feedrate[3]); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Maximum Acceleration (mm/s2):"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M201 X" ,max_acceleration_units_per_sq_second[0] ); + SERIAL_ECHOPAIR(" Y" , max_acceleration_units_per_sq_second[1] ); + SERIAL_ECHOPAIR(" Z" ,max_acceleration_units_per_sq_second[2] ); + SERIAL_ECHOPAIR(" E" ,max_acceleration_units_per_sq_second[3]); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Acceleration: S=acceleration, T=retract acceleration"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M204 S",acceleration ); + SERIAL_ECHOPAIR(" T" ,retract_acceleration); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum xY jerk (mm/s), Z=maximum Z jerk (mm/s)"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M205 S",minimumfeedrate ); + SERIAL_ECHOPAIR(" T" ,mintravelfeedrate ); + SERIAL_ECHOPAIR(" B" ,minsegmenttime ); + SERIAL_ECHOPAIR(" X" ,max_xy_jerk ); + SERIAL_ECHOPAIR(" Z" ,max_z_jerk); + SERIAL_ECHOPAIR(" E" ,max_e_jerk); + SERIAL_ECHOLN(""); + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Home offset (mm):"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M206 X",add_homeing[0] ); + SERIAL_ECHOPAIR(" Y" ,add_homeing[1] ); + SERIAL_ECHOPAIR(" Z" ,add_homeing[2] ); + SERIAL_ECHOLN(""); + #ifdef PIDTEMP + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("PID settings:"); + SERIAL_ECHO_START; + SERIAL_ECHOPAIR(" M301 P",Kp); + SERIAL_ECHOPAIR(" I" ,Ki/PID_dT); + SERIAL_ECHOPAIR(" D" ,Kd*PID_dT); + SERIAL_ECHOLN(""); + #endif +// #endif +} + + +inline void EEPROM_RetrieveSettings(bool def=false) +{ // if def=true, the default values will be used + #ifdef EEPROM_SETTINGS + int i=EEPROM_OFFSET; + char stored_ver[4]; + char ver[4]=EEPROM_VERSION; + EEPROM_readAnything(i,stored_ver); //read stored version + // SERIAL_ECHOLN("Version: [" << ver << "] Stored version: [" << stored_ver << "]"); + if ((!def)&&(strncmp(ver,stored_ver,3)==0)) + { // version number match + EEPROM_readAnything(i,axis_steps_per_unit); + EEPROM_readAnything(i,max_feedrate); + EEPROM_readAnything(i,max_acceleration_units_per_sq_second); + EEPROM_readAnything(i,acceleration); + EEPROM_readAnything(i,retract_acceleration); + EEPROM_readAnything(i,minimumfeedrate); + EEPROM_readAnything(i,mintravelfeedrate); + EEPROM_readAnything(i,minsegmenttime); + EEPROM_readAnything(i,max_xy_jerk); + EEPROM_readAnything(i,max_z_jerk); + EEPROM_readAnything(i,max_e_jerk); + EEPROM_readAnything(i,add_homeing); + EEPROM_readAnything(i,plaPreheatHotendTemp); + EEPROM_readAnything(i,plaPreheatHPBTemp); + EEPROM_readAnything(i,plaPreheatFanSpeed); + EEPROM_readAnything(i,absPreheatHotendTemp); + EEPROM_readAnything(i,absPreheatHPBTemp); + EEPROM_readAnything(i,absPreheatFanSpeed); + #ifndef PIDTEMP + float Kp,Ki,Kd; + #endif + EEPROM_readAnything(i,Kp); + EEPROM_readAnything(i,Ki); + EEPROM_readAnything(i,Kd); + + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM("Stored settings retreived:"); + } + else + #endif + { + float tmp1[]=DEFAULT_AXIS_STEPS_PER_UNIT; + float tmp2[]=DEFAULT_MAX_FEEDRATE; + long tmp3[]=DEFAULT_MAX_ACCELERATION; + for (short i=0;i<4;i++) + { + axis_steps_per_unit[i]=tmp1[i]; + max_feedrate[i]=tmp2[i]; + max_acceleration_units_per_sq_second[i]=tmp3[i]; + } + acceleration=DEFAULT_ACCELERATION; + retract_acceleration=DEFAULT_RETRACT_ACCELERATION; + minimumfeedrate=DEFAULT_MINIMUMFEEDRATE; + minsegmenttime=DEFAULT_MINSEGMENTTIME; + mintravelfeedrate=DEFAULT_MINTRAVELFEEDRATE; + max_xy_jerk=DEFAULT_XYJERK; + max_z_jerk=DEFAULT_ZJERK; + max_e_jerk=DEFAULT_EJERK; + add_homeing[0] = add_homeing[1] = add_homeing[2] = 0; + SERIAL_ECHO_START; + SERIAL_ECHOLN("Using Default settings:"); +#ifdef ULTIPANEL + plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP; + plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP; + plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED; + absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP; + absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP; + absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; +#endif + } + #ifdef EEPROM_CHITCHAT + EEPROM_printSettings(); + #endif +} + +#endif + + diff --git a/Marlin/Marlin/Gen7/boards.txt b/Marlin/Marlin/Gen7/boards.txt new file mode 100644 index 0000000000..d6fbaeeb95 --- /dev/null +++ b/Marlin/Marlin/Gen7/boards.txt @@ -0,0 +1,101 @@ +############################################################## + +Gen7-644-16.name=Gen7 with ATmega644 and 16 MHz +Gen7-644-16.upload.protocol=stk500v2 +Gen7-644-16.upload.maximum_size=63488 +Gen7-644-16.upload.speed=115200 +Gen7-644-16.bootloader.low_fuses=0xF7 +Gen7-644-16.bootloader.high_fuses=0xD4 +Gen7-644-16.bootloader.extended_fuses=0xFD +Gen7-644-16.bootloader.path=Gen7 +Gen7-644-16.bootloader.file=bootloader-644-16MHz.hex +Gen7-644-16.bootloader.unlock_bits=0x3F +Gen7-644-16.bootloader.lock_bits=0x0F +Gen7-644-16.build.mcu=atmega644 +Gen7-644-16.build.f_cpu=16000000L +Gen7-644-16.build.core=arduino + +############################################################## + +Gen7-644-20.name=Gen7 with ATmega644 and 20 MHz +Gen7-644-20.upload.protocol=stk500v2 +Gen7-644-20.upload.maximum_size=63488 +Gen7-644-20.upload.speed=115200 +Gen7-644-20.bootloader.low_fuses=0xF7 +Gen7-644-20.bootloader.high_fuses=0xD4 +Gen7-644-20.bootloader.extended_fuses=0xFD +Gen7-644-20.bootloader.path=Gen7 +Gen7-644-20.bootloader.file=bootloader-644-20MHz.hex +Gen7-644-20.bootloader.unlock_bits=0x3F +Gen7-644-20.bootloader.lock_bits=0x0F +Gen7-644-20.build.mcu=atmega644 +Gen7-644-20.build.f_cpu=20000000L +Gen7-644-20.build.core=arduino + +############################################################## + +Gen7-644P-16.name=Gen7 with ATmega644P and 16 MHz +Gen7-644P-16.upload.protocol=stk500v2 +Gen7-644P-16.upload.maximum_size=63488 +Gen7-644P-16.upload.speed=115200 +Gen7-644P-16.bootloader.low_fuses=0xF7 +Gen7-644P-16.bootloader.high_fuses=0xD4 +Gen7-644P-16.bootloader.extended_fuses=0xFD +Gen7-644P-16.bootloader.path=Gen7 +Gen7-644P-16.bootloader.file=bootloader-644P-16MHz.hex +Gen7-644P-16.bootloader.unlock_bits=0x3F +Gen7-644P-16.bootloader.lock_bits=0x0F +Gen7-644P-16.build.mcu=atmega644p +Gen7-644P-16.build.f_cpu=16000000L +Gen7-644P-16.build.core=arduino + +############################################################## + +Gen7-644P-20.name=Gen7 with ATmega644P and 20 MHz +Gen7-644P-20.upload.protocol=stk500v2 +Gen7-644P-20.upload.maximum_size=63488 +Gen7-644P-20.upload.speed=115200 +Gen7-644P-20.bootloader.low_fuses=0xF7 +Gen7-644P-20.bootloader.high_fuses=0xD4 +Gen7-644P-20.bootloader.extended_fuses=0xFD +Gen7-644P-20.bootloader.path=Gen7 +Gen7-644P-20.bootloader.file=bootloader-644P-20MHz.hex +Gen7-644P-20.bootloader.unlock_bits=0x3F +Gen7-644P-20.bootloader.lock_bits=0x0F +Gen7-644P-20.build.mcu=atmega644p +Gen7-644P-20.build.f_cpu=20000000L +Gen7-644P-20.build.core=arduino + +############################################################## + +Gen7-1284p-16.name=Gen7 with ATmega1284 and 16 MHz +Gen7-1284p-16.upload.protocol=stk500v2 +Gen7-1284p-16.upload.maximum_size=129024 +Gen7-1284p-16.upload.speed=115200 +Gen7-1284p-16.bootloader.low_fuses=0xF7 +Gen7-1284p-16.bootloader.high_fuses=0xD4 +Gen7-1284p-16.bootloader.extended_fuses=0xFD +Gen7-1284p-16.bootloader.path=Gen7 +Gen7-1284p-16.bootloader.file=bootloader-1284P-16MHz.hex +Gen7-1284p-16.bootloader.unlock_bits=0x3F +Gen7-1284p-16.bootloader.lock_bits=0x2F +Gen7-1284p-16.build.mcu=atmega1284p +Gen7-1284p-16.build.f_cpu=16000000L +Gen7-1284p-16.build.core=arduino + +############################################################## + +Gen7-1284p-20.name=Gen7 with ATmega1284 and 20 MHz +Gen7-1284p-20.upload.protocol=stk500v2 +Gen7-1284p-20.upload.maximum_size=129024 +Gen7-1284p-20.upload.speed=115200 +Gen7-1284p-20.bootloader.low_fuses=0xF7 +Gen7-1284p-20.bootloader.high_fuses=0xD4 +Gen7-1284p-20.bootloader.extended_fuses=0xFD +Gen7-1284p-20.bootloader.path=Gen7 +Gen7-1284p-20.bootloader.file=bootloader-1284P-16MHz.hex +Gen7-1284p-20.bootloader.unlock_bits=0x3F +Gen7-1284p-20.bootloader.lock_bits=0x2F +Gen7-1284p-20.build.mcu=atmega1284p +Gen7-1284p-20.build.f_cpu=20000000L +Gen7-1284p-20.build.core=arduino diff --git a/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-1284P-16MHz.hex b/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-1284P-16MHz.hex new file mode 100644 index 0000000000..93df372ca3 --- /dev/null +++ b/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-1284P-16MHz.hex @@ -0,0 +1,113 @@ +:020000021000EC +:10F8000011241FBE8FEF90E49EBF8DBF01C32F92C6 +:10F810003F924F925F926F927F928F929F92AF92A0 +:10F82000BF92CF92DF92EF92FF920F931F93DF93DD +:10F83000CF93CDB7DEB7C252D1400FB6F894DEBF3A +:10F840000FBECDBF44245524DD24C25EDE4F188296 +:10F85000CE51D1408824992454013AC20E9428FFF5 +:10F86000282F133059F1143028F4113081F0123060 +:10F8700000F507C0153081F1153030F1163071F701 +:10F880003DC08B3159F711E05BE1D52EE7CF8130D8 +:10F8900041F0C25EDE4F3881CE51D140831709F06E +:10F8A00019C2D226C25EDE4F2883CE51D14012E06B +:10F8B000D5CFF82EEE24D82613E0D0CF90E0E82A5A +:10F8C000F92AD22614E0CACF8E3009F003C2D82616 +:10F8D00015E044245524C2CFE1E0F0E0EC0FFD1F19 +:10F8E000E40DF51D80830894411C511CD8264E144C +:10F8F0005F0409F0B3CF720116E0B0CF8D1509F0A7 +:10F90000E9C1EAC1CC2447C08D81803311F090E079 +:10F910000AC08F81882311F49EE105C0813011F067 +:10F9200095E001C097E91A821B828D818C838E81BC +:10F930008D839E831F8247E0E42EF12C88C11A82BA +:10F9400068E06B8383E58C8394E59D83EBE4EE8331 +:10F9500085E38F8380E3888789878FE58A8782E3C1 +:10F960008B873BE0E32EF12C72C18A81813941F013 +:10F97000823941F0803911F48FE005C080E003C086 +:10F9800082E001C08AE01A828B8323E0E22EF12C10 +:10F990005EC1CC24C3941A8292E0E92EF12C58C1A6 +:10F9A0008D81882311F48EE128C0813011F085E02B +:10F9B00024C087E922C01A8229E0E1E0F0E0209328 +:10F9C000570084911BC08B81803589F48C818830ED +:10F9D00039F439E0E2E0F0E03093570084910DC053 +:10F9E00069E0E0E0F0E060935700849106C099E0A0 +:10F9F000E3E0F0E09093570084911A828B831C829D +:10FA000084E0E82EF12C23C18A8190E0A0E0B0E0F0 +:10FA1000B82EAA24992488248B8190E0A0E0B0E03D +:10FA2000DC0199278827882A992AAA2ABB2A8D814E +:10FA300090E0A0E0B0E0882A992AAA2ABB2A8C810B +:10FA400090E0A0E0B0E0BA2FA92F982F8827882A4D +:10FA5000992AAA2ABB2A88C0EA81C05EDE4FE883C1 +:10FA6000C052D140C15EDE4F1882CF51D1408B8150 +:10FA7000A82FB0E0C15EDE4F28813981CF51D1403F +:10FA8000A22BB32B933109F042C075016401CC0C59 +:10FA9000DD1CEE1CFF1C33E0F601E0925B003093AE +:10FAA0005700E89507B600FCFDCF8E01055F1F4F9C +:10FAB000F801808161810E5F1F4FA5019401220F23 +:10FAC000331F441F551F362E222490E0822993298C +:10FAD00061E00C01F90140935B0060935700E895E9 +:10FAE00011240894811C911CA11CB11C129701F7D0 +:10FAF00085E0F601E0925B0080935700E89507B639 +:10FB000000FCFDCF81E180935700E8952DC0FE01F8 +:10FB10003B9620E030E040E050E011977D0100E0AE +:10FB200010E00894E11CF11C011D111D6081F99980 +:10FB3000FECF1FBAC901880D991D92BD81BD60BD60 +:10FB40000FB6F894FA9AF99A0FBE2F5F3F4F4F4FB6 +:10FB50005F4F2E153F054007510711F03196E6CF54 +:10FB6000820E931EA41EB51E1A826EC09A81CE5DAF +:10FB7000DE4F9883C252D140CF5DDE4F1882C15212 +:10FB8000D1408B81C82EDD24CF5DDE4FE881F98125 +:10FB9000C152D140CE2ADF2A1A8289818431E1F410 +:10FBA0009601BE016D5F7F4FD501C401880F991F7B +:10FBB000AA1FBB1FABBFFC0187919691FB018083FD +:10FBC00091836E5F7F4F0894811C911CA11CB11C16 +:10FBD0002250304049F72EC0BE016D5F7F4F20E0BC +:10FBE00030E040E050E00894C108D108760100E020 +:10FBF00010E00894C11CD11C0894E11CF11C011DEB +:10FC0000111DF999FECFC901880D991D92BD81BDC5 +:10FC1000F89A80B5FB018193BF012F5F3F4F4F4F93 +:10FC20005F4F2E153F054007510759F7820E931E6F +:10FC3000A41EB51E23E0E22EF12CEC0CFD1CFB01F2 +:10FC4000108205C080EC8A8392E0E92EF12CCC244E +:10FC50008BE10E94C7FEC25EDE4F8881CE51D1404B +:10FC60000E94C7FE8F2D0E94C7FE8E2D0E94C7FEE8 +:10FC70008EE00E94C7FE85E1D82EC25EDE4FF8817D +:10FC8000CE51D140DF26DE24DF243E010894611CE2 +:10FC9000711C0AC0F30111913F01812F0E94C7FE20 +:10FCA000D1260894E108F108E114F10499F78D2DAB +:10FCB0000E94C7FECC2009F044C0C25EDE4FF8812E +:10FCC000CE51D140FF5FC25EDE4FF883CE51D140AE +:10FCD000EE24FF2410E0C2CD9981933109F4BCCE0B +:10FCE0009431B0F4933009F440CE943038F491302C +:10FCF00009F425CE923009F0A5CF04CE903109F455 +:10FD000001CE913109F445CE963009F09BCF7CCEDF +:10FD1000983109F458CE993150F4953109F49CCEBC +:10FD2000953108F423CF963109F08CCF1FCF9B314A +:10FD300009F436CE9D3109F4E7CD9A3109F082CF2E +:10FD40003ACECE5DDE4F0FB6F894DEBF0FBECDBF0C +:10FD5000CF91DF911F910F91FF90EF90DF90CF90A7 +:10FD6000BF90AF909F908F907F906F905F904F90DB +:10FD70003F902F9008958091C00087FFFCCF089599 +:10FD80008091C00087FFFCCF8091C6000895982F16 +:10FD90008091C00085FFFCCF9093C60008959B0121 +:10FDA000AC0197FF11C08091C00082608093C000B9 +:10FDB00050954095309521953F4F4F4F5F4F60E0F4 +:10FDC00074E284EF90E009C08091C0008D7F809341 +:10FDD000C00060E072E18AE790E00E9447FF2C5F7C +:10FDE0003F4F4F4F5F4F83E0569547953795279587 +:10FDF0008A95D1F7215030403093C5002093C4003C +:10FE0000089518B817B81F921F921F920895FFCF38 +:10FE100084B714BE90E083709070892B39F418B8C1 +:10FE200017B81F921F921F920895FFCF88E1809309 +:10FE3000C10060E07EE38EEF9FEF0E94CFFE0E9444 +:10FE400007FC18B817B81F921F921F920895FFCF92 +:10FE500020E030E040E050E013C02F5F3F4F4F4FB5 +:10FE60005F4F21308AE6380788E1480780E058076D +:10FE700039F418B817B81F921F921F920895FFCF38 +:10FE80008091C00087FFE9CF0E94C0FE0895A1E2E3 +:10FE90001A2EAA1BBB1BFD010DC0AA1FBB1FEE1F04 +:10FEA000FF1FA217B307E407F50720F0A21BB30B4F +:10FEB000E40BF50B661F771F881F991F1A9469F7CB +:10FEC00060957095809590959B01AC01BD01CF0127 +:02FED000089593 +:040000031000F800F1 +:00000001FF diff --git a/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644-16MHz.hex b/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644-16MHz.hex new file mode 100644 index 0000000000..58098693d6 --- /dev/null +++ b/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644-16MHz.hex @@ -0,0 +1,75 @@ +:10F800008FEF90E19EBF8DBF11241FBE5A9A00C09A +:10F81000CDB7DEB7CD51D140DEBFCDBF1092C50010 +:10F8200088E08093C40088E18093C100EE24FF2427 +:10F8300020E0552400E010E039E0432E9BE0292E23 +:10F84000312C2C0E3D1ECFC14150504060407040C5 +:10F8500011F43FE206C08091C00087FFF5CF3091E0 +:10F86000C600933021F1943028F4913099F0923011 +:10F87000C8F407C0953049F1953000F19630D1F5C4 +:10F8800035C03B3119F491E02BE134C03F3291F5A2 +:10F890003983BBC1313011F0351559F52327532E6B +:10F8A00092E028C0B32FA0E0232793E023C0832F4A +:10F8B00090E0A82BB92B232794E01CC03E30C9F45C +:10F8C000232795E0EE24FF2415C0E1E0F0E0EC0FE3 +:10F8D000FD1FEE0DFF1D30830894E11CF11C232752 +:10F8E000EA16FB0639F4D70196E004C0321709F492 +:10F8F0008CC190E044E755E962E470E0ACCF90E061 +:10F9000044C08D81803311F090E00AC08F8188233C +:10F9100011F49EE105C0813011F099E001C096E933 +:10F920001A821B828D818C838E818D839E831F82A0 +:10F9300047E050E0F4C01A8288E08B8381E48C8336 +:10F9400086E58D8382E58E8389E48F8383E58887CE +:10F9500080E589878FE58A8782E38B874BE050E0DB +:10F96000DEC08A81813941F0823941F0803911F459 +:10F970008FE005C080E003C082E001C08AE01A8207 +:10F980008B8343E050E0CBC091E01A8242E050E02C +:10F99000C7C08D81882311F48EE124C0813011F01D +:10F9A00089E020C086E91EC01A82E1E0F0E04092C2 +:10F9B0005700849118C08B81803579F48C81883010 +:10F9C00031F4E2E0F0E04092570084910BC0E0E0B7 +:10F9D000F0E040925700849105C0E3E0F0E04092EF +:10F9E000570084911A828B831C8244E050E097C0B8 +:10F9F000BC80AA248D81082F10E00A291B29000F42 +:10FA0000111F1A828AC09A8088248B81682F70E027 +:10FA100068297929933109F033C0F7EF0F3F1F07A9 +:10FA200010F0A8013FC023E0F80120935700E895AB +:10FA300007B600FCFDCFA801D1018C9111962C9145 +:10FA400011971296D22ECC2490E08C299D2921E08A +:10FA5000FA010C0120935700E89511244E5F5F4F87 +:10FA60006250704051F725E0F80120935700E89567 +:10FA700007B600FCFDCF81E180935700E89512C0E6 +:10FA8000A801FB01D10141BD52BD4F5F5F4F8D9178 +:10FA900080BDFA9AF99AF999FECF3197A1F7A8019A +:10FAA000460F571F1A828A0138C07A8066248B81DC +:10FAB000A82FB0E0A629B7291A828981843191F450 +:10FAC000BD019E012D5F3F4FF80185919491F90191 +:10FAD000808391832E5F3F4F0E5F1F4F62507040B7 +:10FAE00099F713C0A801BD019E012D5F3F4F41BD95 +:10FAF00052BD4F5F5F4FF89A80B5F90181939F0126 +:10FB000061507040A1F70A0F1B1FAD014D5F5F4FA1 +:10FB1000F901108204C080EC8A8342E050E090E05A +:10FB2000FBE1F093C6008091C00086FFFCCF80917E +:10FB3000C00080648093C0005092C6008091C000D5 +:10FB400086FFFCCF8091C00080648093C000652F49 +:10FB50005093C6008091C00086FFFCCF8091C0000A +:10FB600080648093C000342F4093C6008091C00011 +:10FB700086FFFCCF8091C00080648093C0008EE03F +:10FB80008093C6008091C00086FFFCCF8091C000AA +:10FB900080648093C00025E1252523272627FE01C8 +:10FBA000319610C030813093C6008091C00086FF2E +:10FBB000FCCF31968091C00080648093C0002327E1 +:10FBC000415050404115510569F72093C60080917E +:10FBD000C00086FFFCCF8091C00080648093C0008D +:10FBE000992349F4539444E755E962E470E090E0C6 +:10FBF000A0E0B0E030CE5A9881E180935700E895BC +:10FC000011241F921F920895FFCF9981933109F417 +:10FC1000FACE9431C8F4963009F4EACE973050F415 +:10FC2000923009F46CCE933009F49BCE913009F0F8 +:10FC300072CF81CE913109F4A7CE923108F0E1CE96 +:10FC4000903109F068CF5BCE983109F4B4CE993188 +:10FC500050F4953109F4D7CE953108F426CF96317A +:10FC600009F059CF22CF9B3109F493CE9C3120F477 +:10FC70009A3109F050CF98CE9D3109F442CE9F328F +:06FC800009F049CFB8CFE6 +:040000030000F80001 +:00000001FF diff --git a/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644-20MHz.hex b/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644-20MHz.hex new file mode 100644 index 0000000000..d216c65f9b --- /dev/null +++ b/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644-20MHz.hex @@ -0,0 +1,75 @@ +:10F800008FEF90E19EBF8DBF11241FBE5A9A00C09A +:10F81000CDB7DEB7CD51D140DEBFCDBF1092C50010 +:10F820008AE08093C40088E18093C100EE24FF2425 +:10F8300020E0552400E010E039E0432E9BE0292E23 +:10F84000312C2C0E3D1ECFC14150504060407040C5 +:10F8500011F43FE206C08091C00087FFF5CF3091E0 +:10F86000C600933021F1943028F4913099F0923011 +:10F87000C8F407C0953049F1953000F19630D1F5C4 +:10F8800035C03B3119F491E02BE134C03F3291F5A2 +:10F890003983BBC1313011F0351559F52327532E6B +:10F8A00092E028C0B32FA0E0232793E023C0832F4A +:10F8B00090E0A82BB92B232794E01CC03E30C9F45C +:10F8C000232795E0EE24FF2415C0E1E0F0E0EC0FE3 +:10F8D000FD1FEE0DFF1D30830894E11CF11C232752 +:10F8E000EA16FB0639F4D70196E004C0321709F492 +:10F8F0008CC190E041ED5AE363E570E0ACCF90E05D +:10F9000044C08D81803311F090E00AC08F8188233C +:10F9100011F49EE105C0813011F099E001C096E933 +:10F920001A821B828D818C838E818D839E831F82A0 +:10F9300047E050E0F4C01A8288E08B8381E48C8336 +:10F9400086E58D8382E58E8389E48F8383E58887CE +:10F9500080E589878FE58A8782E38B874BE050E0DB +:10F96000DEC08A81813941F0823941F0803911F459 +:10F970008FE005C080E003C082E001C08AE01A8207 +:10F980008B8343E050E0CBC091E01A8242E050E02C +:10F99000C7C08D81882311F48EE124C0813011F01D +:10F9A00089E020C086E91EC01A82E1E0F0E04092C2 +:10F9B0005700849118C08B81803579F48C81883010 +:10F9C00031F4E2E0F0E04092570084910BC0E0E0B7 +:10F9D000F0E040925700849105C0E3E0F0E04092EF +:10F9E000570084911A828B831C8244E050E097C0B8 +:10F9F000BC80AA248D81082F10E00A291B29000F42 +:10FA0000111F1A828AC09A8088248B81682F70E027 +:10FA100068297929933109F033C0F7EF0F3F1F07A9 +:10FA200010F0A8013FC023E0F80120935700E895AB +:10FA300007B600FCFDCFA801D1018C9111962C9145 +:10FA400011971296D22ECC2490E08C299D2921E08A +:10FA5000FA010C0120935700E89511244E5F5F4F87 +:10FA60006250704051F725E0F80120935700E89567 +:10FA700007B600FCFDCF81E180935700E89512C0E6 +:10FA8000A801FB01D10141BD52BD4F5F5F4F8D9178 +:10FA900080BDFA9AF99AF999FECF3197A1F7A8019A +:10FAA000460F571F1A828A0138C07A8066248B81DC +:10FAB000A82FB0E0A629B7291A828981843191F450 +:10FAC000BD019E012D5F3F4FF80185919491F90191 +:10FAD000808391832E5F3F4F0E5F1F4F62507040B7 +:10FAE00099F713C0A801BD019E012D5F3F4F41BD95 +:10FAF00052BD4F5F5F4FF89A80B5F90181939F0126 +:10FB000061507040A1F70A0F1B1FAD014D5F5F4FA1 +:10FB1000F901108204C080EC8A8342E050E090E05A +:10FB2000FBE1F093C6008091C00086FFFCCF80917E +:10FB3000C00080648093C0005092C6008091C000D5 +:10FB400086FFFCCF8091C00080648093C000652F49 +:10FB50005093C6008091C00086FFFCCF8091C0000A +:10FB600080648093C000342F4093C6008091C00011 +:10FB700086FFFCCF8091C00080648093C0008EE03F +:10FB80008093C6008091C00086FFFCCF8091C000AA +:10FB900080648093C00025E1252523272627FE01C8 +:10FBA000319610C030813093C6008091C00086FF2E +:10FBB000FCCF31968091C00080648093C0002327E1 +:10FBC000415050404115510569F72093C60080917E +:10FBD000C00086FFFCCF8091C00080648093C0008D +:10FBE000992349F4539441ED5AE363E570E090E0C2 +:10FBF000A0E0B0E030CE5A9881E180935700E895BC +:10FC000011241F921F920895FFCF9981933109F417 +:10FC1000FACE9431C8F4963009F4EACE973050F415 +:10FC2000923009F46CCE933009F49BCE913009F0F8 +:10FC300072CF81CE913109F4A7CE923108F0E1CE96 +:10FC4000903109F068CF5BCE983109F4B4CE993188 +:10FC500050F4953109F4D7CE953108F426CF96317A +:10FC600009F059CF22CF9B3109F493CE9C3120F477 +:10FC70009A3109F050CF98CE9D3109F442CE9F328F +:06FC800009F049CFB8CFE6 +:040000030000F80001 +:00000001FF diff --git a/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-16MHz.hex b/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-16MHz.hex new file mode 100644 index 0000000000..a9105a2217 --- /dev/null +++ b/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-16MHz.hex @@ -0,0 +1,75 @@ +:10F800008FEF90E19EBF8DBF11241FBE5A9A00C09A +:10F81000CDB7DEB7CD51D140DEBFCDBF1092C50010 +:10F8200088E08093C40088E18093C100EE24FF2427 +:10F8300020E0552400E010E039E0432E93E0292E2B +:10F84000312C2C0E3D1ECDC14150504060407040C7 +:10F8500011F43FE206C08091C00087FFF5CF3091E0 +:10F86000C600933021F1943028F4913099F0923011 +:10F87000C8F407C0953049F1953000F19630D1F5C4 +:10F8800035C03B3119F491E02BE134C03F3291F5A2 +:10F890003983B9C1313011F0351559F52327532E6D +:10F8A00092E028C0B32FA0E0232793E023C0832F4A +:10F8B00090E0A82BB92B232794E01CC03E30C9F45C +:10F8C000232795E0EE24FF2415C0E1E0F0E0EC0FE3 +:10F8D000FD1FEE0DFF1D30830894E11CF11C232752 +:10F8E000EA16FB0639F4D70196E004C0321709F492 +:10F8F0008AC190E044E755E962E470E0ACCF90E063 +:10F9000044C08D81803311F090E00AC08F8188233C +:10F9100011F49EE105C0813011F09AE001C096E932 +:10F920001A821B828D818C838E818D839E831F82A0 +:10F9300047E050E0F2C01A8288E08B8381E48C8338 +:10F9400086E58D8382E58E8389E48F8383E58887CE +:10F9500080E589878FE58A8782E38B874BE050E0DB +:10F96000DCC08A81813941F0823941F0803911F45B +:10F970008FE005C080E003C082E001C08AE01A8207 +:10F980008B8343E050E0C9C091E01A8242E050E02E +:10F99000C5C08D81882311F48EE124C0813011F01F +:10F9A0008AE020C086E91EC01A82E1E0F0E04092C1 +:10F9B0005700849118C08B81803579F48C81883010 +:10F9C00031F4E2E0F0E04092570084910BC0E0E0B7 +:10F9D000F0E040925700849105C0E3E0F0E04092EF +:10F9E000570084911A828B831C8244E050E095C0BA +:10F9F000BC80AA248D81082F10E00A291B29000F42 +:10FA0000111F1A8288C09A8088248B81682F70E029 +:10FA100068297929933109F034C0F7EF0F3F1F07A8 +:10FA200010F0A80141C023E0F80120935700E895A9 +:10FA300007B600FCFDCFA801DE011B968C91119644 +:10FA40002C9111971296D22ECC2490E08C299D29CE +:10FA500021E0FA010C0120935700E89511244E5F34 +:10FA60005F4F6250704051F725E0F8012093570036 +:10FA7000E89507B600FCFDCF81E180935700E8953B +:10FA800013C0A801FB01DE011B9641BD52BD4F5FB3 +:10FA90005F4F8D9180BDFA9AF99AF999FECF31970F +:10FAA000A1F7A801460F571F1A828A0134C07A8035 +:10FAB00066248B81A82FB0E0A629B7291A828981F4 +:10FAC000843181F4BD019101F80185919491F9018E +:10FAD000808391832E5F3F4F0E5F1F4F62507040B7 +:10FAE00099F711C0A801BD01910141BD52BD4F5F01 +:10FAF0005F4FF89A80B5F90181939F016150704082 +:10FB0000A1F70A0F1B1FAD014D5F5F4FF901108276 +:10FB100004C080EC8A8342E050E090E0FBE1F09387 +:10FB2000C6008091C00086FFFCCF8091C000806439 +:10FB30008093C0005092C6008091C00086FFFCCF29 +:10FB40008091C00080648093C000652F5093C600F0 +:10FB50008091C00086FFFCCF8091C00080648093BC +:10FB6000C000342F4093C6008091C00086FFFCCFB8 +:10FB70008091C00080648093C0008EE08093C600B6 +:10FB80008091C00086FFFCCF8091C000806480938C +:10FB9000C00025E1252523272627FE01319610C028 +:10FBA00030813093C6008091C00086FFFCCF319633 +:10FBB0008091C00080648093C00023274150504052 +:10FBC0004115510569F72093C6008091C00086FF5A +:10FBD000FCCF8091C00080648093C000992349F4D9 +:10FBE000539444E755E962E470E090E0A0E0B0E0AF +:10FBF00032CE5A9881E180935700E89511241F92E4 +:10FC00001F920895FFCF9981933109F4FCCE94316E +:10FC1000C8F4963009F4ECCE973050F4923009F4E1 +:10FC20006ECE933009F49DCE913009F072CF83CE21 +:10FC3000913109F4A9CE923108F0E3CE903109F068 +:10FC400068CF5DCE983109F4B6CE993150F4953134 +:10FC500009F4D9CE953108F42ACF963109F059CF5D +:10FC600026CF9B3109F495CE9C3120F49A3109F0CE +:10FC700050CF9ACE9D3109F444CE9F3209F049CF3E +:02FC8000B8CFFB +:040000030000F80001 +:00000001FF diff --git a/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-20MHz.hex b/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-20MHz.hex new file mode 100644 index 0000000000..4ee0c6b1fc --- /dev/null +++ b/Marlin/Marlin/Gen7/bootloaders/Gen7/bootloader-644P-20MHz.hex @@ -0,0 +1,75 @@ +:10F800008FEF90E19EBF8DBF11241FBE5A9A00C09A +:10F81000CDB7DEB7CD51D140DEBFCDBF1092C50010 +:10F820008AE08093C40088E18093C100EE24FF2425 +:10F8300020E0552400E010E039E0432E93E0292E2B +:10F84000312C2C0E3D1ECDC14150504060407040C7 +:10F8500011F43FE206C08091C00087FFF5CF3091E0 +:10F86000C600933021F1943028F4913099F0923011 +:10F87000C8F407C0953049F1953000F19630D1F5C4 +:10F8800035C03B3119F491E02BE134C03F3291F5A2 +:10F890003983B9C1313011F0351559F52327532E6D +:10F8A00092E028C0B32FA0E0232793E023C0832F4A +:10F8B00090E0A82BB92B232794E01CC03E30C9F45C +:10F8C000232795E0EE24FF2415C0E1E0F0E0EC0FE3 +:10F8D000FD1FEE0DFF1D30830894E11CF11C232752 +:10F8E000EA16FB0639F4D70196E004C0321709F492 +:10F8F0008AC190E041ED5AE363E570E0ACCF90E05F +:10F9000044C08D81803311F090E00AC08F8188233C +:10F9100011F49EE105C0813011F09AE001C096E932 +:10F920001A821B828D818C838E818D839E831F82A0 +:10F9300047E050E0F2C01A8288E08B8381E48C8338 +:10F9400086E58D8382E58E8389E48F8383E58887CE +:10F9500080E589878FE58A8782E38B874BE050E0DB +:10F96000DCC08A81813941F0823941F0803911F45B +:10F970008FE005C080E003C082E001C08AE01A8207 +:10F980008B8343E050E0C9C091E01A8242E050E02E +:10F99000C5C08D81882311F48EE124C0813011F01F +:10F9A0008AE020C086E91EC01A82E1E0F0E04092C1 +:10F9B0005700849118C08B81803579F48C81883010 +:10F9C00031F4E2E0F0E04092570084910BC0E0E0B7 +:10F9D000F0E040925700849105C0E3E0F0E04092EF +:10F9E000570084911A828B831C8244E050E095C0BA +:10F9F000BC80AA248D81082F10E00A291B29000F42 +:10FA0000111F1A8288C09A8088248B81682F70E029 +:10FA100068297929933109F034C0F7EF0F3F1F07A8 +:10FA200010F0A80141C023E0F80120935700E895A9 +:10FA300007B600FCFDCFA801DE011B968C91119644 +:10FA40002C9111971296D22ECC2490E08C299D29CE +:10FA500021E0FA010C0120935700E89511244E5F34 +:10FA60005F4F6250704051F725E0F8012093570036 +:10FA7000E89507B600FCFDCF81E180935700E8953B +:10FA800013C0A801FB01DE011B9641BD52BD4F5FB3 +:10FA90005F4F8D9180BDFA9AF99AF999FECF31970F +:10FAA000A1F7A801460F571F1A828A0134C07A8035 +:10FAB00066248B81A82FB0E0A629B7291A828981F4 +:10FAC000843181F4BD019101F80185919491F9018E +:10FAD000808391832E5F3F4F0E5F1F4F62507040B7 +:10FAE00099F711C0A801BD01910141BD52BD4F5F01 +:10FAF0005F4FF89A80B5F90181939F016150704082 +:10FB0000A1F70A0F1B1FAD014D5F5F4FF901108276 +:10FB100004C080EC8A8342E050E090E0FBE1F09387 +:10FB2000C6008091C00086FFFCCF8091C000806439 +:10FB30008093C0005092C6008091C00086FFFCCF29 +:10FB40008091C00080648093C000652F5093C600F0 +:10FB50008091C00086FFFCCF8091C00080648093BC +:10FB6000C000342F4093C6008091C00086FFFCCFB8 +:10FB70008091C00080648093C0008EE08093C600B6 +:10FB80008091C00086FFFCCF8091C000806480938C +:10FB9000C00025E1252523272627FE01319610C028 +:10FBA00030813093C6008091C00086FFFCCF319633 +:10FBB0008091C00080648093C00023274150504052 +:10FBC0004115510569F72093C6008091C00086FF5A +:10FBD000FCCF8091C00080648093C000992349F4D9 +:10FBE000539441ED5AE363E570E090E0A0E0B0E0AB +:10FBF00032CE5A9881E180935700E89511241F92E4 +:10FC00001F920895FFCF9981933109F4FCCE94316E +:10FC1000C8F4963009F4ECCE973050F4923009F4E1 +:10FC20006ECE933009F49DCE913009F072CF83CE21 +:10FC3000913109F4A9CE923108F0E3CE903109F068 +:10FC400068CF5DCE983109F4B6CE993150F4953134 +:10FC500009F4D9CE953108F42ACF963109F059CF5D +:10FC600026CF9B3109F495CE9C3120F49A3109F0CE +:10FC700050CF9ACE9D3109F444CE9F3209F049CF3E +:02FC8000B8CFFB +:040000030000F80001 +:00000001FF diff --git a/Marlin/Marlin/Gen7/cores/arduino/HardwareSerial.cpp b/Marlin/Marlin/Gen7/cores/arduino/HardwareSerial.cpp new file mode 100644 index 0000000000..8b1fcc6014 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/HardwareSerial.cpp @@ -0,0 +1,239 @@ +/* + HardwareSerial.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis +*/ + +#include +#include +#include +#include "wiring.h" +#include "wiring_private.h" + +#include "HardwareSerial.h" + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which rx_buffer_head is the index of the +// location to which to write the next incoming character and rx_buffer_tail +// is the index of the location from which to read. +#define RX_BUFFER_SIZE 128 + +struct ring_buffer { + unsigned char buffer[RX_BUFFER_SIZE]; + int head; + int tail; +}; + +ring_buffer rx_buffer = { { 0 }, 0, 0 }; + +#ifdef UDR1 +ring_buffer rx_buffer1 = { { 0 }, 0, 0 }; +#endif + +#ifdef UDR2 +ring_buffer rx_buffer2 = { { 0 }, 0, 0 }; +#endif +#ifdef UDR3 +ring_buffer rx_buffer3 = { { 0 }, 0, 0 }; +#endif + +inline void store_char(unsigned char c, ring_buffer *rx_buffer) +{ + int i = (rx_buffer->head + 1) % RX_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != rx_buffer->tail) { + rx_buffer->buffer[rx_buffer->head] = c; + rx_buffer->head = i; + } +} + +ISR(USART0_RX_vect) +{ + unsigned char c = UDR0; + store_char(c, &rx_buffer); +} + +#ifdef UDR1 +ISR(USART1_RX_vect) +{ + unsigned char c = UDR1; + store_char(c, &rx_buffer1); +} + +#ifdef UDR2 +ISR(USART2_RX_vect) +{ + unsigned char c = UDR2; + store_char(c, &rx_buffer2); +} + +#ifdef UDR2 +ISR(USART3_RX_vect) +{ + unsigned char c = UDR3; + store_char(c, &rx_buffer3); +} +#endif +#endif + +#else + +#if defined(__AVR_ATmega8__) +SIGNAL(SIG_UART_RECV) +#else +SIGNAL(USART_RX_vect) +#endif +{ +#if defined(__AVR_ATmega8__) + unsigned char c = UDR; +#else + unsigned char c = UDR0; +#endif + store_char(c, &rx_buffer); +} + +#endif + +// Constructors //////////////////////////////////////////////////////////////// + +HardwareSerial::HardwareSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x) +{ + _rx_buffer = rx_buffer; + _ubrrh = ubrrh; + _ubrrl = ubrrl; + _ucsra = ucsra; + _ucsrb = ucsrb; + _udr = udr; + _rxen = rxen; + _txen = txen; + _rxcie = rxcie; + _udre = udre; + _u2x = u2x; +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void HardwareSerial::begin(long baud) +{ + uint16_t baud_setting; + bool use_u2x; + + // U2X mode is needed for baud rates higher than (CPU Hz / 16) + if (baud > F_CPU / 16) { + use_u2x = true; + } else { + // figure out if U2X mode would allow for a better connection + + // calculate the percent difference between the baud-rate specified and + // the real baud rate for both U2X and non-U2X mode (0-255 error percent) + uint8_t nonu2x_baud_error = abs((int)(255-((F_CPU/(16*(((F_CPU/8/baud-1)/2)+1))*255)/baud))); + uint8_t u2x_baud_error = abs((int)(255-((F_CPU/(8*(((F_CPU/4/baud-1)/2)+1))*255)/baud))); + + // prefer non-U2X mode because it handles clock skew better + use_u2x = (nonu2x_baud_error > u2x_baud_error); + } + + if (use_u2x) { + *_ucsra = 1 << _u2x; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + *_ucsra = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + *_ubrrh = baud_setting >> 8; + *_ubrrl = baud_setting; + + sbi(*_ucsrb, _rxen); + sbi(*_ucsrb, _txen); + sbi(*_ucsrb, _rxcie); +} + +void HardwareSerial::end() +{ + cbi(*_ucsrb, _rxen); + cbi(*_ucsrb, _txen); + cbi(*_ucsrb, _rxcie); +} + +uint8_t HardwareSerial::available(void) +{ + return (RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % RX_BUFFER_SIZE; +} + +int HardwareSerial::read(void) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + unsigned char c = _rx_buffer->buffer[_rx_buffer->tail]; + _rx_buffer->tail = (_rx_buffer->tail + 1) % RX_BUFFER_SIZE; + return c; + } +} + +void HardwareSerial::flush() +{ + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // were full, not empty. + _rx_buffer->head = _rx_buffer->tail; +} + +void HardwareSerial::write(uint8_t c) +{ + while (!((*_ucsra) & (1 << _udre))) + ; + + *_udr = c; +} + +// Preinstantiate Objects ////////////////////////////////////////////////////// + +#if defined(__AVR_ATmega8__) +HardwareSerial Serial(&rx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UDR, RXEN, TXEN, RXCIE, UDRE, U2X); +#else +HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0, U2X0); +#endif + +#ifdef UDR1 +HardwareSerial Serial1(&rx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UDR1, RXEN1, TXEN1, RXCIE1, UDRE1, U2X1); +#endif + +#ifdef UDR2 +HardwareSerial Serial2(&rx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UDR2, RXEN2, TXEN2, RXCIE2, UDRE2, U2X2); +#endif +#ifdef UDR3 +HardwareSerial Serial3(&rx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UDR3, RXEN3, TXEN3, RXCIE3, UDRE3, U2X3); +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/HardwareSerial.h b/Marlin/Marlin/Gen7/cores/arduino/HardwareSerial.h new file mode 100644 index 0000000000..f609f73d3d --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/HardwareSerial.h @@ -0,0 +1,69 @@ +/* + HardwareSerial.h - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef HardwareSerial_h +#define HardwareSerial_h + +#include + +#include "Print.h" + +struct ring_buffer; + +class HardwareSerial : public Print +{ + private: + ring_buffer *_rx_buffer; + volatile uint8_t *_ubrrh; + volatile uint8_t *_ubrrl; + volatile uint8_t *_ucsra; + volatile uint8_t *_ucsrb; + volatile uint8_t *_udr; + uint8_t _rxen; + uint8_t _txen; + uint8_t _rxcie; + uint8_t _udre; + uint8_t _u2x; + public: + HardwareSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x); + void begin(long); + void end(); + uint8_t available(void); + int read(void); + void flush(void); + virtual void write(uint8_t); + using Print::write; // pull in write(str) and write(buf, size) from Print +}; + +extern HardwareSerial Serial; + +#if defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1280__) +extern HardwareSerial Serial1; +#endif + +#if defined(__AVR_ATmega1280__) +extern HardwareSerial Serial2; +extern HardwareSerial Serial3; +#endif + +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/Makefile b/Marlin/Marlin/Gen7/cores/arduino/Makefile new file mode 100644 index 0000000000..571687db98 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/Makefile @@ -0,0 +1,243 @@ +# Arduino 0011 Makefile +# Arduino adaptation by mellis, eighthave, oli.keller +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# Detailed instructions for using the makefile: +# +# 1. Copy this file into the folder with your sketch. There should be a +# file with the same name as the folder and with the extension .pde +# (e.g. foo.pde in the foo/ folder). +# +# 2. Modify the line containg "INSTALL_DIR" to point to the directory that +# contains the Arduino installation (for example, under Mac OS X, this +# might be /Applications/arduino-0012). +# +# 3. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*). +# +# 4. Set the line containing "MCU" to match your board's processor. +# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth +# or Diecimila have the atmega168. If you're using a LilyPad Arduino, +# change F_CPU to 8000000. +# +# 5. At the command line, change to the directory containing your +# program's file and the makefile. +# +# 6. Type "make" and press enter to compile/verify your program. +# +# 7. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id$ + +TARGET = $(notdir $(CURDIR)) +INSTALL_DIR = /Users/dmellis/Source/arduino/trunk/build/macosx/build/work +PORT = /dev/tty.usb* +UPLOAD_RATE = 19200 +AVRDUDE_PROGRAMMER = stk500v1 +MCU = atmega168 +F_CPU = 16000000 + +############################################################################ +# Below here nothing should be changed... + +ARDUINO = $(INSTALL_DIR)/hardware/cores/arduino +AVR_TOOLS_PATH = $(INSTALL_DIR)/hardware/tools/avr/bin +SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \ +$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \ +$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_serial.c \ +$(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c +CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp +FORMAT = ihex + + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Place -I options here +CINCS = -I$(ARDUINO) +CXXINCS = -I$(ARDUINO) + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) +CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = -lm + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex +AVRDUDE_FLAGS = -V -F -C $(INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf \ +-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ +-b $(UPLOAD_RATE) + +# Program settings +CC = $(AVR_TOOLS_PATH)/avr-gcc +CXX = $(AVR_TOOLS_PATH)/avr-g++ +OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy +OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump +AR = $(AVR_TOOLS_PATH)/avr-ar +SIZE = $(AVR_TOOLS_PATH)/avr-size +NM = $(AVR_TOOLS_PATH)/avr-nm +AVRDUDE = $(AVR_TOOLS_PATH)/avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + +# Default target. +all: applet_files build sizeafter + +build: elf hex + +applet_files: $(TARGET).pde + # Here is the "preprocessing". + # It creates a .cpp file based with the same name as the .pde file. + # On top of the new .cpp file comes the WProgram.h header. + # At the end there is a generic main() function attached. + # Then the .cpp file will be compiled. Errors during compile will + # refer to this new, automatically generated, file. + # Not the original .pde file you actually edit... + test -d applet || mkdir applet + echo '#include "WProgram.h"' > applet/$(TARGET).cpp + cat $(TARGET).pde >> applet/$(TARGET).cpp + cat $(ARDUINO)/main.cxx >> applet/$(TARGET).cpp + +elf: applet/$(TARGET).elf +hex: applet/$(TARGET).hex +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + +# Program the device. +upload: applet/$(TARGET).hex + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) + + + # Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex +ELFSIZE = $(SIZE) applet/$(TARGET).elf +sizebefore: + @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi + +sizeafter: + @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ +--change-section-address .data-0x800000 \ +--change-section-address .bss-0x800000 \ +--change-section-address .noinit-0x800000 \ +--change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof + + +extcoff: $(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym + +.elf.hex: + $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + # Link: create ELF output file from library. +applet/$(TARGET).elf: $(TARGET).pde applet/core.a + $(CC) $(ALL_CFLAGS) -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS) + +applet/core.a: $(OBJ) + @for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done + + + +# Compile: create object files from C++ source files. +.cpp.o: + $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ + +# Compile: create object files from C source files. +.c.o: + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +.c.s: + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +.S.o: + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + + +# Target: clean project. +clean: + $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \ + applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + +depend: + if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ + then \ + sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ + $(MAKEFILE).$$$$ && \ + $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ + fi + echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ + >> $(MAKEFILE); \ + $(CC) -M -mmcu=$(MCU) $(CDEFS) $(CINCS) $(SRC) $(ASRC) >> $(MAKEFILE) + +.PHONY: all build elf hex eep lss sym program coff extcoff clean depend applet_files sizebefore sizeafter diff --git a/Marlin/Marlin/Gen7/cores/arduino/Print.cpp b/Marlin/Marlin/Gen7/cores/arduino/Print.cpp new file mode 100644 index 0000000000..d4833da7cb --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/Print.cpp @@ -0,0 +1,203 @@ +/* + Print.cpp - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + */ + +#include +#include +#include +#include +#include "wiring.h" + +#include "Print.h" + +// Public Methods ////////////////////////////////////////////////////////////// + +void Print::print(uint8_t b) +{ + this->write(b); +} + +void Print::print(char c) +{ + print((byte) c); +} + +void Print::print(const char c[]) +{ + while (*c) + print(*c++); +} + +void Print::print(int n) +{ + print((long) n); +} + +void Print::print(unsigned int n) +{ + print((unsigned long) n); +} + +void Print::print(long n) +{ + if (n < 0) { + print('-'); + n = -n; + } + printNumber(n, 10); +} + +void Print::print(unsigned long n) +{ + printNumber(n, 10); +} + +void Print::print(long n, int base) +{ + if (base == 0) + print((char) n); + else if (base == 10) + print(n); + else + printNumber(n, base); +} + +void Print::print(double n) +{ + printFloat(n, 2); +} + +void Print::println(void) +{ + print('\r'); + print('\n'); +} + +void Print::println(char c) +{ + print(c); + println(); +} + +void Print::println(const char c[]) +{ + print(c); + println(); +} + +void Print::println(uint8_t b) +{ + print(b); + println(); +} + +void Print::println(int n) +{ + print(n); + println(); +} + +void Print::println(unsigned int n) +{ + print(n); + println(); +} + +void Print::println(long n) +{ + print(n); + println(); +} + +void Print::println(unsigned long n) +{ + print(n); + println(); +} + +void Print::println(long n, int base) +{ + print(n, base); + println(); +} + +void Print::println(double n) +{ + print(n); + println(); +} + +// Private Methods ///////////////////////////////////////////////////////////// + +void Print::printNumber(unsigned long n, uint8_t base) +{ + unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars. + unsigned long i = 0; + + if (n == 0) { + print('0'); + return; + } + + while (n > 0) { + buf[i++] = n % base; + n /= base; + } + + for (; i > 0; i--) + print((char) (buf[i - 1] < 10 ? + '0' + buf[i - 1] : + 'A' + buf[i - 1] - 10)); +} + +void Print::printFloat(double number, uint8_t digits) +{ + // Handle negative numbers + if (number < 0.0) + { + print('-'); + number = -number; + } + + // Round correctly so that print(1.999, 2) prints as "2.00" + double rounding = 0.5; + for (uint8_t i=0; i 0) + print("."); + + // Extract digits from the remainder one at a time + while (digits-- > 0) + { + remainder *= 10.0; + int toPrint = int(remainder); + print(toPrint); + remainder -= toPrint; + } +} diff --git a/Marlin/Marlin/Gen7/cores/arduino/Print.h b/Marlin/Marlin/Gen7/cores/arduino/Print.h new file mode 100644 index 0000000000..c95a0dc094 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/Print.h @@ -0,0 +1,59 @@ +/* + Print.h - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef Print_h +#define Print_h + +#include + +#define DEC 10 +#define HEX 16 +#define OCT 8 +#define BIN 2 +#define BYTE 0 + +class Print +{ + private: + void printNumber(unsigned long, uint8_t); + void printFloat(double, uint8_t); + public: + virtual void write(uint8_t); + void print(char); + void print(const char[]); + void print(uint8_t); + void print(int); + void print(unsigned int); + void print(long); + void print(unsigned long); + void print(long, int); + void print(double); + void println(void); + void println(char); + void println(const char[]); + void println(uint8_t); + void println(int); + void println(unsigned int); + void println(long); + void println(unsigned long); + void println(long, int); + void println(double); +}; + +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/Tone.cpp b/Marlin/Marlin/Gen7/cores/arduino/Tone.cpp new file mode 100644 index 0000000000..827fe49ef4 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/Tone.cpp @@ -0,0 +1,515 @@ +/* Tone.cpp + + A Tone Generator Library + + Written by Brett Hagman + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Version Modified By Date Comments +------- ----------- -------- -------- +0001 B Hagman 09/08/02 Initial coding +0002 B Hagman 09/08/18 Multiple pins +0003 B Hagman 09/08/18 Moved initialization from constructor to begin() +0004 B Hagman 09/09/26 Fixed problems with ATmega8 +0005 B Hagman 09/11/23 Scanned prescalars for best fit on 8 bit timers + 09/11/25 Changed pin toggle method to XOR + 09/11/25 Fixed timer0 from being excluded +0006 D Mellis 09/12/29 Replaced objects with functions + +*************************************************/ + +#include +#include +#include +#include + +#if defined(__AVR_ATmega8__) +#define TCCR2A TCCR2 +#define TCCR2B TCCR2 +#define COM2A1 COM21 +#define COM2A0 COM20 +#define OCR2A OCR2 +#define TIMSK2 TIMSK +#define OCIE2A OCIE2 +#define TIMER2_COMPA_vect TIMER2_COMP_vect +#define TIMSK1 TIMSK +#endif + +// timerx_toggle_count: +// > 0 - duration specified +// = 0 - stopped +// < 0 - infinitely (until stop() method called, or new play() called) + +#if !defined(__AVR_ATmega8__) +volatile long timer0_toggle_count; +volatile uint8_t *timer0_pin_port; +volatile uint8_t timer0_pin_mask; +#endif + +volatile long timer1_toggle_count; +volatile uint8_t *timer1_pin_port; +volatile uint8_t timer1_pin_mask; +volatile long timer2_toggle_count; +volatile uint8_t *timer2_pin_port; +volatile uint8_t timer2_pin_mask; + +#if defined(__AVR_ATmega1280__) +volatile long timer3_toggle_count; +volatile uint8_t *timer3_pin_port; +volatile uint8_t timer3_pin_mask; +volatile long timer4_toggle_count; +volatile uint8_t *timer4_pin_port; +volatile uint8_t timer4_pin_mask; +volatile long timer5_toggle_count; +volatile uint8_t *timer5_pin_port; +volatile uint8_t timer5_pin_mask; +#endif + + +#if defined(__AVR_ATmega1280__) + +#define AVAILABLE_TONE_PINS 1 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 3, 4, 5, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255, 255, 255, 255 */ }; + +#elif defined(__AVR_ATmega8__) + +#define AVAILABLE_TONE_PINS 1 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ }; + +#else + +#define AVAILABLE_TONE_PINS 1 + +// Leave timer 0 to last. +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255 */ }; + +#endif + + + +static int8_t toneBegin(uint8_t _pin) +{ + int8_t _timer = -1; + + // if we're already using the pin, the timer should be configured. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + return pgm_read_byte(tone_pin_to_timer_PGM + i); + } + } + + // search for an unused timer. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == 255) { + tone_pins[i] = _pin; + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + break; + } + } + + if (_timer != -1) + { + // Set timer specific stuff + // All timers in CTC mode + // 8 bit timers will require changing prescalar values, + // whereas 16 bit timers are set to either ck/1 or ck/64 prescalar + switch (_timer) + { +#if !defined(__AVR_ATmega8__) + case 0: + // 8 bit timer + TCCR0A = 0; + TCCR0B = 0; + bitWrite(TCCR0A, WGM01, 1); + bitWrite(TCCR0B, CS00, 1); + timer0_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer0_pin_mask = digitalPinToBitMask(_pin); + break; +#endif + + case 1: + // 16 bit timer + TCCR1A = 0; + TCCR1B = 0; + bitWrite(TCCR1B, WGM12, 1); + bitWrite(TCCR1B, CS10, 1); + timer1_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer1_pin_mask = digitalPinToBitMask(_pin); + break; + case 2: + // 8 bit timer + TCCR2A = 0; + TCCR2B = 0; + bitWrite(TCCR2A, WGM21, 1); + bitWrite(TCCR2B, CS20, 1); + timer2_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer2_pin_mask = digitalPinToBitMask(_pin); + break; + +#if defined(__AVR_ATmega1280__) + case 3: + // 16 bit timer + TCCR3A = 0; + TCCR3B = 0; + bitWrite(TCCR3B, WGM32, 1); + bitWrite(TCCR3B, CS30, 1); + timer3_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer3_pin_mask = digitalPinToBitMask(_pin); + break; + case 4: + // 16 bit timer + TCCR4A = 0; + TCCR4B = 0; + bitWrite(TCCR4B, WGM42, 1); + bitWrite(TCCR4B, CS40, 1); + timer4_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer4_pin_mask = digitalPinToBitMask(_pin); + break; + case 5: + // 16 bit timer + TCCR5A = 0; + TCCR5B = 0; + bitWrite(TCCR5B, WGM52, 1); + bitWrite(TCCR5B, CS50, 1); + timer5_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer5_pin_mask = digitalPinToBitMask(_pin); + break; +#endif + } + } + + return _timer; +} + + + +// frequency (in hertz) and duration (in milliseconds). + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration) +{ + uint8_t prescalarbits = 0b001; + long toggle_count = 0; + uint32_t ocr = 0; + int8_t _timer; + + _timer = toneBegin(_pin); + + if (_timer >= 0) + { + // Set the pinMode as OUTPUT + pinMode(_pin, OUTPUT); + + // if we are using an 8 bit timer, scan through prescalars to find the best fit + if (_timer == 0 || _timer == 2) + { + ocr = F_CPU / frequency / 2 - 1; + prescalarbits = 0b001; // ck/1: same for both timers + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 8 - 1; + prescalarbits = 0b010; // ck/8: same for both timers + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 32 - 1; + prescalarbits = 0b011; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = _timer == 0 ? 0b011 : 0b100; + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 128 - 1; + prescalarbits = 0b101; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 256 - 1; + prescalarbits = _timer == 0 ? 0b100 : 0b110; + if (ocr > 255) + { + // can't do any better than /1024 + ocr = F_CPU / frequency / 2 / 1024 - 1; + prescalarbits = _timer == 0 ? 0b101 : 0b111; + } + } + } + } + +#if !defined(__AVR_ATmega8__) + if (_timer == 0) + TCCR0B = prescalarbits; + else +#endif + TCCR2B = prescalarbits; + } + else + { + // two choices for the 16 bit timers: ck/1 or ck/64 + ocr = F_CPU / frequency / 2 - 1; + + prescalarbits = 0b001; + if (ocr > 0xffff) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = 0b011; + } + + if (_timer == 1) + TCCR1B = (TCCR1B & 0b11111000) | prescalarbits; +#if defined(__AVR_ATmega1280__) + else if (_timer == 3) + TCCR3B = (TCCR3B & 0b11111000) | prescalarbits; + else if (_timer == 4) + TCCR4B = (TCCR4B & 0b11111000) | prescalarbits; + else if (_timer == 5) + TCCR5B = (TCCR5B & 0b11111000) | prescalarbits; +#endif + + } + + + // Calculate the toggle count + if (duration > 0) + { + toggle_count = 2 * frequency * duration / 1000; + } + else + { + toggle_count = -1; + } + + // Set the OCR for the given timer, + // set the toggle count, + // then turn on the interrupts + switch (_timer) + { + +#if !defined(__AVR_ATmega8__) + case 0: + OCR0A = ocr; + timer0_toggle_count = toggle_count; + bitWrite(TIMSK0, OCIE0A, 1); + break; +#endif + + case 1: + OCR1A = ocr; + timer1_toggle_count = toggle_count; + bitWrite(TIMSK1, OCIE1A, 1); + break; + case 2: + OCR2A = ocr; + timer2_toggle_count = toggle_count; + bitWrite(TIMSK2, OCIE2A, 1); + break; + +#if defined(__AVR_ATmega1280__) + case 3: + OCR3A = ocr; + timer3_toggle_count = toggle_count; + bitWrite(TIMSK3, OCIE3A, 1); + break; + case 4: + OCR4A = ocr; + timer4_toggle_count = toggle_count; + bitWrite(TIMSK4, OCIE4A, 1); + break; + case 5: + OCR5A = ocr; + timer5_toggle_count = toggle_count; + bitWrite(TIMSK5, OCIE5A, 1); + break; +#endif + + } + } +} + + +void noTone(uint8_t _pin) +{ + int8_t _timer = -1; + + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + tone_pins[i] = 255; + } + } + + switch (_timer) + { +#if defined(__AVR_ATmega8__) + case 1: + bitWrite(TIMSK1, OCIE1A, 0); + break; + case 2: + bitWrite(TIMSK2, OCIE2A, 0); + break; + +#else + case 0: + TIMSK0 = 0; + break; + case 1: + TIMSK1 = 0; + break; + case 2: + TIMSK2 = 0; + break; +#endif + +#if defined(__AVR_ATmega1280__) + case 3: + TIMSK3 = 0; + break; + case 4: + TIMSK4 = 0; + break; + case 5: + TIMSK5 = 0; + break; +#endif + } + + digitalWrite(_pin, 0); +} + +#if 0 +#if !defined(__AVR_ATmega8__) +ISR(TIMER0_COMPA_vect) +{ + if (timer0_toggle_count != 0) + { + // toggle the pin + *timer0_pin_port ^= timer0_pin_mask; + + if (timer0_toggle_count > 0) + timer0_toggle_count--; + } + else + { + TIMSK0 = 0; // disable the interrupt + *timer0_pin_port &= ~(timer0_pin_mask); // keep pin low after stop + } +} +#endif + + +ISR(TIMER1_COMPA_vect) +{ + if (timer1_toggle_count != 0) + { + // toggle the pin + *timer1_pin_port ^= timer1_pin_mask; + + if (timer1_toggle_count > 0) + timer1_toggle_count--; + } + else + { + TIMSK1 = 0; // disable the interrupt + *timer1_pin_port &= ~(timer1_pin_mask); // keep pin low after stop + } +} +#endif + + +ISR(TIMER2_COMPA_vect) +{ + + if (timer2_toggle_count != 0) + { + // toggle the pin + *timer2_pin_port ^= timer2_pin_mask; + + if (timer2_toggle_count > 0) + timer2_toggle_count--; + } + else + { + TIMSK2 = 0; // disable the interrupt + *timer2_pin_port &= ~(timer2_pin_mask); // keep pin low after stop + } +} + + + +//#if defined(__AVR_ATmega1280__) +#if 0 + +ISR(TIMER3_COMPA_vect) +{ + if (timer3_toggle_count != 0) + { + // toggle the pin + *timer3_pin_port ^= timer3_pin_mask; + + if (timer3_toggle_count > 0) + timer3_toggle_count--; + } + else + { + TIMSK3 = 0; // disable the interrupt + *timer3_pin_port &= ~(timer3_pin_mask); // keep pin low after stop + } +} + +ISR(TIMER4_COMPA_vect) +{ + if (timer4_toggle_count != 0) + { + // toggle the pin + *timer4_pin_port ^= timer4_pin_mask; + + if (timer4_toggle_count > 0) + timer4_toggle_count--; + } + else + { + TIMSK4 = 0; // disable the interrupt + *timer4_pin_port &= ~(timer4_pin_mask); // keep pin low after stop + } +} + +ISR(TIMER5_COMPA_vect) +{ + if (timer5_toggle_count != 0) + { + // toggle the pin + *timer5_pin_port ^= timer5_pin_mask; + + if (timer5_toggle_count > 0) + timer5_toggle_count--; + } + else + { + TIMSK5 = 0; // disable the interrupt + *timer5_pin_port &= ~(timer5_pin_mask); // keep pin low after stop + } +} + +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/WCharacter.h b/Marlin/Marlin/Gen7/cores/arduino/WCharacter.h new file mode 100644 index 0000000000..79733b50a5 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/WCharacter.h @@ -0,0 +1,168 @@ +/* + WCharacter.h - Character utility functions for Wiring & Arduino + Copyright (c) 2010 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef Character_h +#define Character_h + +#include + +// WCharacter.h prototypes +inline boolean isAlphaNumeric(int c) __attribute__((always_inline)); +inline boolean isAlpha(int c) __attribute__((always_inline)); +inline boolean isAscii(int c) __attribute__((always_inline)); +inline boolean isWhitespace(int c) __attribute__((always_inline)); +inline boolean isControl(int c) __attribute__((always_inline)); +inline boolean isDigit(int c) __attribute__((always_inline)); +inline boolean isGraph(int c) __attribute__((always_inline)); +inline boolean isLowerCase(int c) __attribute__((always_inline)); +inline boolean isPrintable(int c) __attribute__((always_inline)); +inline boolean isPunct(int c) __attribute__((always_inline)); +inline boolean isSpace(int c) __attribute__((always_inline)); +inline boolean isUpperCase(int c) __attribute__((always_inline)); +inline boolean isHexadecimalDigit(int c) __attribute__((always_inline)); +inline int toAscii(int c) __attribute__((always_inline)); +inline int toLowerCase(int c) __attribute__((always_inline)); +inline int toUpperCase(int c)__attribute__((always_inline)); + + +// Checks for an alphanumeric character. +// It is equivalent to (isalpha(c) || isdigit(c)). +inline boolean isAlphaNumeric(int c) +{ + return ( isalnum(c) == 0 ? false : true); +} + + +// Checks for an alphabetic character. +// It is equivalent to (isupper(c) || islower(c)). +inline boolean isAlpha(int c) +{ + return ( isalpha(c) == 0 ? false : true); +} + + +// Checks whether c is a 7-bit unsigned char value +// that fits into the ASCII character set. +inline boolean isAscii(int c) +{ + return ( isascii (c) == 0 ? false : true); +} + + +// Checks for a blank character, that is, a space or a tab. +inline boolean isWhitespace(int c) +{ + return ( isblank (c) == 0 ? false : true); +} + + +// Checks for a control character. +inline boolean isControl(int c) +{ + return ( iscntrl (c) == 0 ? false : true); +} + + +// Checks for a digit (0 through 9). +inline boolean isDigit(int c) +{ + return ( isdigit (c) == 0 ? false : true); +} + + +// Checks for any printable character except space. +inline boolean isGraph(int c) +{ + return ( isgraph (c) == 0 ? false : true); +} + + +// Checks for a lower-case character. +inline boolean isLowerCase(int c) +{ + return (islower (c) == 0 ? false : true); +} + + +// Checks for any printable character including space. +inline boolean isPrintable(int c) +{ + return ( isprint (c) == 0 ? false : true); +} + + +// Checks for any printable character which is not a space +// or an alphanumeric character. +inline boolean isPunct(int c) +{ + return ( ispunct (c) == 0 ? false : true); +} + + +// Checks for white-space characters. For the avr-libc library, +// these are: space, formfeed ('\f'), newline ('\n'), carriage +// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v'). +inline boolean isSpace(int c) +{ + return ( isspace (c) == 0 ? false : true); +} + + +// Checks for an uppercase letter. +inline boolean isUpperCase(int c) +{ + return ( isupper (c) == 0 ? false : true); +} + + +// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7 +// 8 9 a b c d e f A B C D E F. +inline boolean isHexadecimalDigit(int c) +{ + return ( isxdigit (c) == 0 ? false : true); +} + + +// Converts c to a 7-bit unsigned char value that fits into the +// ASCII character set, by clearing the high-order bits. +inline int toAscii(int c) +{ + return toascii (c); +} + + +// Warning: +// Many people will be unhappy if you use this function. +// This function will convert accented letters into random +// characters. + +// Converts the letter c to lower case, if possible. +inline int toLowerCase(int c) +{ + return tolower (c); +} + + +// Converts the letter c to upper case, if possible. +inline int toUpperCase(int c) +{ + return toupper (c); +} + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/Gen7/cores/arduino/WConstants.h b/Marlin/Marlin/Gen7/cores/arduino/WConstants.h new file mode 100644 index 0000000000..3e19ac44aa --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/WConstants.h @@ -0,0 +1 @@ +#include "wiring.h" diff --git a/Marlin/Marlin/Gen7/cores/arduino/WInterrupts.c b/Marlin/Marlin/Gen7/cores/arduino/WInterrupts.c new file mode 100644 index 0000000000..6f3f0b130a --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/WInterrupts.c @@ -0,0 +1,87 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.uniandes.edu.co + + Copyright (c) 2004-05 Hernando Barragan + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 24 November 2006 by David A. Mellis +*/ + +#include +#include +#include +#include +#include + +#include "WConstants.h" +#include "wiring_private.h" + +volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS]; +// volatile static voidFuncPtr twiIntFunc; + +void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) +{ + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) + { + intFunc[interruptNum] = userFunc; + + //clear the config for the change settings + EICRA &= ~(B00000011 << (interruptNum * 2)); + + //set our mode. + EICRA |= (mode << (interruptNum * 2)); + + // Enable the interrupt. + EIMSK |= (1 << interruptNum); + } +} + +void detachInterrupt(uint8_t interruptNum) +{ + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) + { + // Disable the interrupt. + EIMSK &= ~(1 << interruptNum); + + intFunc[interruptNum] = 0; + } +} + +ISR(INT0_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +ISR(INT1_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +ISR(INT2_vect) { + if(intFunc[EXTERNAL_INT_2]) + intFunc[EXTERNAL_INT_2](); +} + +/* +SIGNAL(SIG_2WIRE_SERIAL) { + if(twiIntFunc) + twiIntFunc(); +} +*/ + diff --git a/Marlin/Marlin/Gen7/cores/arduino/WMath.cpp b/Marlin/Marlin/Gen7/cores/arduino/WMath.cpp new file mode 100644 index 0000000000..7a230f542f --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/WMath.cpp @@ -0,0 +1,60 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.org.co + Copyright (c) 2004-06 Hernando Barragan + Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/ + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +extern "C" { + #include "stdlib.h" +} + +void randomSeed(unsigned int seed) +{ + if (seed != 0){ + srandom(seed); + } +} + +long random(long howbig) +{ + if (howbig == 0) { + return 0; + } + return random() % howbig; +} + +long random(long howsmall, long howbig) +{ + if (howsmall >= howbig) { + return howsmall; + } + long diff = howbig - howsmall; + return random(diff) + howsmall; +} + +long map(long x, long in_min, long in_max, long out_min, long out_max) +{ + return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min; +} + +unsigned int makeWord(unsigned int w) { return w; } +unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; } diff --git a/Marlin/Marlin/Gen7/cores/arduino/WProgram.h b/Marlin/Marlin/Gen7/cores/arduino/WProgram.h new file mode 100644 index 0000000000..2c7ed16d89 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/WProgram.h @@ -0,0 +1,34 @@ +#ifndef WProgram_h +#define WProgram_h + +#include +#include +#include + +#include + +#include "wiring.h" + +#ifdef __cplusplus +#include "WCharacter.h" +#include "WString.h" +#include "HardwareSerial.h" + +uint16_t makeWord(uint16_t w); +uint16_t makeWord(byte h, byte l); + +#define word(...) makeWord(__VA_ARGS__) + +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); +void noTone(uint8_t _pin); + +// WMath prototypes +long random(long); +long random(long, long); +void randomSeed(unsigned int); +long map(long, long, long, long, long); +#endif + +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/WString.cpp b/Marlin/Marlin/Gen7/cores/arduino/WString.cpp new file mode 100644 index 0000000000..db5a441dc2 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/WString.cpp @@ -0,0 +1,443 @@ +/* + WString.cpp - String library for Wiring & Arduino + Copyright (c) 2009-10 Hernando Barragan. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include +#include "WProgram.h" +#include "WString.h" + + +String::String( const char *value ) +{ + if ( value == NULL ) + value = ""; + getBuffer( _length = strlen( value ) ); + if ( _buffer != NULL ) + strcpy( _buffer, value ); +} + +String::String( const String &value ) +{ + getBuffer( _length = value._length ); + if ( _buffer != NULL ) + strcpy( _buffer, value._buffer ); +} + +String::String( const char value ) +{ + _length = 1; + getBuffer(1); + if ( _buffer != NULL ) { + _buffer[0] = value; + _buffer[1] = 0; + } +} + +String::String( const unsigned char value ) +{ + _length = 1; + getBuffer(1); + if ( _buffer != NULL) { + _buffer[0] = value; + _buffer[1] = 0; + } +} + +String::String( const int value, const int base ) +{ + char buf[33]; + itoa((signed long)value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const unsigned int value, const int base ) +{ + char buf[33]; + ultoa((unsigned long)value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const long value, const int base ) +{ + char buf[33]; + ltoa(value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const unsigned long value, const int base ) +{ + char buf[33]; + ultoa(value, buf, 10); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +char String::charAt( unsigned int loc ) const +{ + return operator[]( loc ); +} + +void String::setCharAt( unsigned int loc, const char aChar ) +{ + if(_buffer == NULL) return; + if(_length > loc) { + _buffer[loc] = aChar; + } +} + +int String::compareTo( const String &s2 ) const +{ + return strcmp( _buffer, s2._buffer ); +} + +const String & String::concat( const String &s2 ) +{ + return (*this) += s2; +} + +const String & String::operator=( const String &rhs ) +{ + if ( this == &rhs ) + return *this; + + if ( rhs._length > _length ) + { + free(_buffer); + getBuffer( rhs._length ); + } + + if ( _buffer != NULL ) { + _length = rhs._length; + strcpy( _buffer, rhs._buffer ); + } + return *this; +} + +//const String & String::operator+=( const char aChar ) +//{ +// if ( _length == _capacity ) +// doubleBuffer(); +// +// _buffer[ _length++ ] = aChar; +// _buffer[ _length ] = '\0'; +// return *this; +//} + +const String & String::operator+=( const String &other ) +{ + _length += other._length; + if ( _length > _capacity ) + { + char *temp = (char *)realloc(_buffer, _length + 1); + if ( temp != NULL ) { + _buffer = temp; + _capacity = _length; + } else { + _length -= other._length; + return *this; + } + } + strcat( _buffer, other._buffer ); + return *this; +} + + +int String::operator==( const String &rhs ) const +{ + return ( _length == rhs._length && strcmp( _buffer, rhs._buffer ) == 0 ); +} + +int String::operator!=( const String &rhs ) const +{ + return ( _length != rhs.length() || strcmp( _buffer, rhs._buffer ) != 0 ); +} + +int String::operator<( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) < 0; +} + +int String::operator>( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) > 0; +} + +int String::operator<=( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) <= 0; +} + +int String::operator>=( const String & rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) >= 0; +} + +char & String::operator[]( unsigned int index ) +{ + static char dummy_writable_char; + if (index >= _length || !_buffer) { + dummy_writable_char = 0; + return dummy_writable_char; + } + return _buffer[ index ]; +} + +char String::operator[]( unsigned int index ) const +{ + // need to check for valid index, to do later + return _buffer[ index ]; +} + +boolean String::endsWith( const String &s2 ) const +{ + if ( _length < s2._length ) + return 0; + + return strcmp( &_buffer[ _length - s2._length], s2._buffer ) == 0; +} + +boolean String::equals( const String &s2 ) const +{ + return ( _length == s2._length && strcmp( _buffer,s2._buffer ) == 0 ); +} + +boolean String::equalsIgnoreCase( const String &s2 ) const +{ + if ( this == &s2 ) + return true; //1; + else if ( _length != s2._length ) + return false; //0; + + return strcmp(toLowerCase()._buffer, s2.toLowerCase()._buffer) == 0; +} + +String String::replace( char findChar, char replaceChar ) +{ + if ( _buffer == NULL ) return *this; + String theReturn = _buffer; + char* temp = theReturn._buffer; + while( (temp = strchr( temp, findChar )) != 0 ) + *temp = replaceChar; + + return theReturn; +} + +String String::replace( const String& match, const String& replace ) +{ + if ( _buffer == NULL ) return *this; + String temp = _buffer, newString; + + int loc; + while ( (loc = temp.indexOf( match )) != -1 ) + { + newString += temp.substring( 0, loc ); + newString += replace; + temp = temp.substring( loc + match._length ); + } + newString += temp; + return newString; +} + +int String::indexOf( char temp ) const +{ + return indexOf( temp, 0 ); +} + +int String::indexOf( char ch, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + const char* temp = strchr( &_buffer[fromIndex], ch ); + if ( temp == NULL ) + return -1; + + return temp - _buffer; +} + +int String::indexOf( const String &s2 ) const +{ + return indexOf( s2, 0 ); +} + +int String::indexOf( const String &s2, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + const char *theFind = strstr( &_buffer[ fromIndex ], s2._buffer ); + + if ( theFind == NULL ) + return -1; + + return theFind - _buffer; // pointer subtraction +} + +int String::lastIndexOf( char theChar ) const +{ + return lastIndexOf( theChar, _length - 1 ); +} + +int String::lastIndexOf( char ch, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + char tempchar = _buffer[fromIndex + 1]; + _buffer[fromIndex + 1] = '\0'; + char* temp = strrchr( _buffer, ch ); + _buffer[fromIndex + 1] = tempchar; + + if ( temp == NULL ) + return -1; + + return temp - _buffer; +} + +int String::lastIndexOf( const String &s2 ) const +{ + return lastIndexOf( s2, _length - s2._length ); +} + +int String::lastIndexOf( const String &s2, unsigned int fromIndex ) const +{ + // check for empty strings + if ( s2._length == 0 || s2._length - 1 > fromIndex || fromIndex >= _length ) + return -1; + + // matching first character + char temp = s2[ 0 ]; + + for ( int i = fromIndex; i >= 0; i-- ) + { + if ( _buffer[ i ] == temp && (*this).substring( i, i + s2._length ).equals( s2 ) ) + return i; + } + return -1; +} + +boolean String::startsWith( const String &s2 ) const +{ + if ( _length < s2._length ) + return 0; + + return startsWith( s2, 0 ); +} + +boolean String::startsWith( const String &s2, unsigned int offset ) const +{ + if ( offset > _length - s2._length ) + return 0; + + return strncmp( &_buffer[offset], s2._buffer, s2._length ) == 0; +} + +String String::substring( unsigned int left ) const +{ + return substring( left, _length ); +} + +String String::substring( unsigned int left, unsigned int right ) const +{ + if ( left > right ) + { + int temp = right; + right = left; + left = temp; + } + + if ( right > _length ) + { + right = _length; + } + + char temp = _buffer[ right ]; // save the replaced character + _buffer[ right ] = '\0'; + String outPut = ( _buffer + left ); // pointer arithmetic + _buffer[ right ] = temp; //restore character + return outPut; +} + +String String::toLowerCase() const +{ + String temp = _buffer; + + for ( unsigned int i = 0; i < _length; i++ ) + temp._buffer[ i ] = (char)tolower( temp._buffer[ i ] ); + return temp; +} + +String String::toUpperCase() const +{ + String temp = _buffer; + + for ( unsigned int i = 0; i < _length; i++ ) + temp._buffer[ i ] = (char)toupper( temp._buffer[ i ] ); + return temp; +} + +String String::trim() const +{ + if ( _buffer == NULL ) return *this; + String temp = _buffer; + unsigned int i,j; + + for ( i = 0; i < _length; i++ ) + { + if ( !isspace(_buffer[i]) ) + break; + } + + for ( j = temp._length - 1; j > i; j-- ) + { + if ( !isspace(_buffer[j]) ) + break; + } + + return temp.substring( i, j + 1); +} + +void String::getBytes(unsigned char *buf, unsigned int bufsize) +{ + if (!bufsize || !buf) return; + unsigned int len = bufsize - 1; + if (len > _length) len = _length; + strncpy((char *)buf, _buffer, len); + buf[len] = 0; +} + +void String::toCharArray(char *buf, unsigned int bufsize) +{ + if (!bufsize || !buf) return; + unsigned int len = bufsize - 1; + if (len > _length) len = _length; + strncpy(buf, _buffer, len); + buf[len] = 0; +} + + +long String::toInt() { + return atol(_buffer); +} diff --git a/Marlin/Marlin/Gen7/cores/arduino/WString.h b/Marlin/Marlin/Gen7/cores/arduino/WString.h new file mode 100644 index 0000000000..cadddb9476 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/WString.h @@ -0,0 +1,112 @@ +/* + WString.h - String library for Wiring & Arduino + Copyright (c) 2009-10 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef String_h +#define String_h + +//#include "WProgram.h" +#include +#include +#include + +class String +{ + public: + // constructors + String( const char *value = "" ); + String( const String &value ); + String( const char ); + String( const unsigned char ); + String( const int, const int base=10); + String( const unsigned int, const int base=10 ); + String( const long, const int base=10 ); + String( const unsigned long, const int base=10 ); + ~String() { free(_buffer); _length = _capacity = 0;} //added _length = _capacity = 0; + + // operators + const String & operator = ( const String &rhs ); + const String & operator +=( const String &rhs ); + //const String & operator +=( const char ); + int operator ==( const String &rhs ) const; + int operator !=( const String &rhs ) const; + int operator < ( const String &rhs ) const; + int operator > ( const String &rhs ) const; + int operator <=( const String &rhs ) const; + int operator >=( const String &rhs ) const; + char operator []( unsigned int index ) const; + char& operator []( unsigned int index ); + //operator const char *() const { return _buffer; } + + // general methods + char charAt( unsigned int index ) const; + int compareTo( const String &anotherString ) const; + unsigned char endsWith( const String &suffix ) const; + unsigned char equals( const String &anObject ) const; + unsigned char equalsIgnoreCase( const String &anotherString ) const; + int indexOf( char ch ) const; + int indexOf( char ch, unsigned int fromIndex ) const; + int indexOf( const String &str ) const; + int indexOf( const String &str, unsigned int fromIndex ) const; + int lastIndexOf( char ch ) const; + int lastIndexOf( char ch, unsigned int fromIndex ) const; + int lastIndexOf( const String &str ) const; + int lastIndexOf( const String &str, unsigned int fromIndex ) const; + const unsigned int length( ) const { return _length; } + void setCharAt(unsigned int index, const char ch); + unsigned char startsWith( const String &prefix ) const; + unsigned char startsWith( const String &prefix, unsigned int toffset ) const; + String substring( unsigned int beginIndex ) const; + String substring( unsigned int beginIndex, unsigned int endIndex ) const; + String toLowerCase( ) const; + String toUpperCase( ) const; + String trim( ) const; + void getBytes(unsigned char *buf, unsigned int bufsize); + void toCharArray(char *buf, unsigned int bufsize); + long toInt( ); + const String& concat( const String &str ); + String replace( char oldChar, char newChar ); + String replace( const String& match, const String& replace ); + friend String operator + ( String lhs, const String &rhs ); + + protected: + char *_buffer; // the actual char array + unsigned int _capacity; // the array length minus one (for the '\0') + unsigned int _length; // the String length (not counting the '\0') + + void getBuffer(unsigned int maxStrLen); + + private: + +}; + +// allocate buffer space +inline void String::getBuffer(unsigned int maxStrLen) +{ + _capacity = maxStrLen; + _buffer = (char *) malloc(_capacity + 1); + if (_buffer == NULL) _length = _capacity = 0; +} + +inline String operator+( String lhs, const String &rhs ) +{ + return lhs += rhs; +} + + +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/binary.h b/Marlin/Marlin/Gen7/cores/arduino/binary.h new file mode 100644 index 0000000000..af1498033a --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/binary.h @@ -0,0 +1,515 @@ +#ifndef Binary_h +#define Binary_h + +#define B0 0 +#define B00 0 +#define B000 0 +#define B0000 0 +#define B00000 0 +#define B000000 0 +#define B0000000 0 +#define B00000000 0 +#define B1 1 +#define B01 1 +#define B001 1 +#define B0001 1 +#define B00001 1 +#define B000001 1 +#define B0000001 1 +#define B00000001 1 +#define B10 2 +#define B010 2 +#define B0010 2 +#define B00010 2 +#define B000010 2 +#define B0000010 2 +#define B00000010 2 +#define B11 3 +#define B011 3 +#define B0011 3 +#define B00011 3 +#define B000011 3 +#define B0000011 3 +#define B00000011 3 +#define B100 4 +#define B0100 4 +#define B00100 4 +#define B000100 4 +#define B0000100 4 +#define B00000100 4 +#define B101 5 +#define B0101 5 +#define B00101 5 +#define B000101 5 +#define B0000101 5 +#define B00000101 5 +#define B110 6 +#define B0110 6 +#define B00110 6 +#define B000110 6 +#define B0000110 6 +#define B00000110 6 +#define B111 7 +#define B0111 7 +#define B00111 7 +#define B000111 7 +#define B0000111 7 +#define B00000111 7 +#define B1000 8 +#define B01000 8 +#define B001000 8 +#define B0001000 8 +#define B00001000 8 +#define B1001 9 +#define B01001 9 +#define B001001 9 +#define B0001001 9 +#define B00001001 9 +#define B1010 10 +#define B01010 10 +#define B001010 10 +#define B0001010 10 +#define B00001010 10 +#define B1011 11 +#define B01011 11 +#define B001011 11 +#define B0001011 11 +#define B00001011 11 +#define B1100 12 +#define B01100 12 +#define B001100 12 +#define B0001100 12 +#define B00001100 12 +#define B1101 13 +#define B01101 13 +#define B001101 13 +#define B0001101 13 +#define B00001101 13 +#define B1110 14 +#define B01110 14 +#define B001110 14 +#define B0001110 14 +#define B00001110 14 +#define B1111 15 +#define B01111 15 +#define B001111 15 +#define B0001111 15 +#define B00001111 15 +#define B10000 16 +#define B010000 16 +#define B0010000 16 +#define B00010000 16 +#define B10001 17 +#define B010001 17 +#define B0010001 17 +#define B00010001 17 +#define B10010 18 +#define B010010 18 +#define B0010010 18 +#define B00010010 18 +#define B10011 19 +#define B010011 19 +#define B0010011 19 +#define B00010011 19 +#define B10100 20 +#define B010100 20 +#define B0010100 20 +#define B00010100 20 +#define B10101 21 +#define B010101 21 +#define B0010101 21 +#define B00010101 21 +#define B10110 22 +#define B010110 22 +#define B0010110 22 +#define B00010110 22 +#define B10111 23 +#define B010111 23 +#define B0010111 23 +#define B00010111 23 +#define B11000 24 +#define B011000 24 +#define B0011000 24 +#define B00011000 24 +#define B11001 25 +#define B011001 25 +#define B0011001 25 +#define B00011001 25 +#define B11010 26 +#define B011010 26 +#define B0011010 26 +#define B00011010 26 +#define B11011 27 +#define B011011 27 +#define B0011011 27 +#define B00011011 27 +#define B11100 28 +#define B011100 28 +#define B0011100 28 +#define B00011100 28 +#define B11101 29 +#define B011101 29 +#define B0011101 29 +#define B00011101 29 +#define B11110 30 +#define B011110 30 +#define B0011110 30 +#define B00011110 30 +#define B11111 31 +#define B011111 31 +#define B0011111 31 +#define B00011111 31 +#define B100000 32 +#define B0100000 32 +#define B00100000 32 +#define B100001 33 +#define B0100001 33 +#define B00100001 33 +#define B100010 34 +#define B0100010 34 +#define B00100010 34 +#define B100011 35 +#define B0100011 35 +#define B00100011 35 +#define B100100 36 +#define B0100100 36 +#define B00100100 36 +#define B100101 37 +#define B0100101 37 +#define B00100101 37 +#define B100110 38 +#define B0100110 38 +#define B00100110 38 +#define B100111 39 +#define B0100111 39 +#define B00100111 39 +#define B101000 40 +#define B0101000 40 +#define B00101000 40 +#define B101001 41 +#define B0101001 41 +#define B00101001 41 +#define B101010 42 +#define B0101010 42 +#define B00101010 42 +#define B101011 43 +#define B0101011 43 +#define B00101011 43 +#define B101100 44 +#define B0101100 44 +#define B00101100 44 +#define B101101 45 +#define B0101101 45 +#define B00101101 45 +#define B101110 46 +#define B0101110 46 +#define B00101110 46 +#define B101111 47 +#define B0101111 47 +#define B00101111 47 +#define B110000 48 +#define B0110000 48 +#define B00110000 48 +#define B110001 49 +#define B0110001 49 +#define B00110001 49 +#define B110010 50 +#define B0110010 50 +#define B00110010 50 +#define B110011 51 +#define B0110011 51 +#define B00110011 51 +#define B110100 52 +#define B0110100 52 +#define B00110100 52 +#define B110101 53 +#define B0110101 53 +#define B00110101 53 +#define B110110 54 +#define B0110110 54 +#define B00110110 54 +#define B110111 55 +#define B0110111 55 +#define B00110111 55 +#define B111000 56 +#define B0111000 56 +#define B00111000 56 +#define B111001 57 +#define B0111001 57 +#define B00111001 57 +#define B111010 58 +#define B0111010 58 +#define B00111010 58 +#define B111011 59 +#define B0111011 59 +#define B00111011 59 +#define B111100 60 +#define B0111100 60 +#define B00111100 60 +#define B111101 61 +#define B0111101 61 +#define B00111101 61 +#define B111110 62 +#define B0111110 62 +#define B00111110 62 +#define B111111 63 +#define B0111111 63 +#define B00111111 63 +#define B1000000 64 +#define B01000000 64 +#define B1000001 65 +#define B01000001 65 +#define B1000010 66 +#define B01000010 66 +#define B1000011 67 +#define B01000011 67 +#define B1000100 68 +#define B01000100 68 +#define B1000101 69 +#define B01000101 69 +#define B1000110 70 +#define B01000110 70 +#define B1000111 71 +#define B01000111 71 +#define B1001000 72 +#define B01001000 72 +#define B1001001 73 +#define B01001001 73 +#define B1001010 74 +#define B01001010 74 +#define B1001011 75 +#define B01001011 75 +#define B1001100 76 +#define B01001100 76 +#define B1001101 77 +#define B01001101 77 +#define B1001110 78 +#define B01001110 78 +#define B1001111 79 +#define B01001111 79 +#define B1010000 80 +#define B01010000 80 +#define B1010001 81 +#define B01010001 81 +#define B1010010 82 +#define B01010010 82 +#define B1010011 83 +#define B01010011 83 +#define B1010100 84 +#define B01010100 84 +#define B1010101 85 +#define B01010101 85 +#define B1010110 86 +#define B01010110 86 +#define B1010111 87 +#define B01010111 87 +#define B1011000 88 +#define B01011000 88 +#define B1011001 89 +#define B01011001 89 +#define B1011010 90 +#define B01011010 90 +#define B1011011 91 +#define B01011011 91 +#define B1011100 92 +#define B01011100 92 +#define B1011101 93 +#define B01011101 93 +#define B1011110 94 +#define B01011110 94 +#define B1011111 95 +#define B01011111 95 +#define B1100000 96 +#define B01100000 96 +#define B1100001 97 +#define B01100001 97 +#define B1100010 98 +#define B01100010 98 +#define B1100011 99 +#define B01100011 99 +#define B1100100 100 +#define B01100100 100 +#define B1100101 101 +#define B01100101 101 +#define B1100110 102 +#define B01100110 102 +#define B1100111 103 +#define B01100111 103 +#define B1101000 104 +#define B01101000 104 +#define B1101001 105 +#define B01101001 105 +#define B1101010 106 +#define B01101010 106 +#define B1101011 107 +#define B01101011 107 +#define B1101100 108 +#define B01101100 108 +#define B1101101 109 +#define B01101101 109 +#define B1101110 110 +#define B01101110 110 +#define B1101111 111 +#define B01101111 111 +#define B1110000 112 +#define B01110000 112 +#define B1110001 113 +#define B01110001 113 +#define B1110010 114 +#define B01110010 114 +#define B1110011 115 +#define B01110011 115 +#define B1110100 116 +#define B01110100 116 +#define B1110101 117 +#define B01110101 117 +#define B1110110 118 +#define B01110110 118 +#define B1110111 119 +#define B01110111 119 +#define B1111000 120 +#define B01111000 120 +#define B1111001 121 +#define B01111001 121 +#define B1111010 122 +#define B01111010 122 +#define B1111011 123 +#define B01111011 123 +#define B1111100 124 +#define B01111100 124 +#define B1111101 125 +#define B01111101 125 +#define B1111110 126 +#define B01111110 126 +#define B1111111 127 +#define B01111111 127 +#define B10000000 128 +#define B10000001 129 +#define B10000010 130 +#define B10000011 131 +#define B10000100 132 +#define B10000101 133 +#define B10000110 134 +#define B10000111 135 +#define B10001000 136 +#define B10001001 137 +#define B10001010 138 +#define B10001011 139 +#define B10001100 140 +#define B10001101 141 +#define B10001110 142 +#define B10001111 143 +#define B10010000 144 +#define B10010001 145 +#define B10010010 146 +#define B10010011 147 +#define B10010100 148 +#define B10010101 149 +#define B10010110 150 +#define B10010111 151 +#define B10011000 152 +#define B10011001 153 +#define B10011010 154 +#define B10011011 155 +#define B10011100 156 +#define B10011101 157 +#define B10011110 158 +#define B10011111 159 +#define B10100000 160 +#define B10100001 161 +#define B10100010 162 +#define B10100011 163 +#define B10100100 164 +#define B10100101 165 +#define B10100110 166 +#define B10100111 167 +#define B10101000 168 +#define B10101001 169 +#define B10101010 170 +#define B10101011 171 +#define B10101100 172 +#define B10101101 173 +#define B10101110 174 +#define B10101111 175 +#define B10110000 176 +#define B10110001 177 +#define B10110010 178 +#define B10110011 179 +#define B10110100 180 +#define B10110101 181 +#define B10110110 182 +#define B10110111 183 +#define B10111000 184 +#define B10111001 185 +#define B10111010 186 +#define B10111011 187 +#define B10111100 188 +#define B10111101 189 +#define B10111110 190 +#define B10111111 191 +#define B11000000 192 +#define B11000001 193 +#define B11000010 194 +#define B11000011 195 +#define B11000100 196 +#define B11000101 197 +#define B11000110 198 +#define B11000111 199 +#define B11001000 200 +#define B11001001 201 +#define B11001010 202 +#define B11001011 203 +#define B11001100 204 +#define B11001101 205 +#define B11001110 206 +#define B11001111 207 +#define B11010000 208 +#define B11010001 209 +#define B11010010 210 +#define B11010011 211 +#define B11010100 212 +#define B11010101 213 +#define B11010110 214 +#define B11010111 215 +#define B11011000 216 +#define B11011001 217 +#define B11011010 218 +#define B11011011 219 +#define B11011100 220 +#define B11011101 221 +#define B11011110 222 +#define B11011111 223 +#define B11100000 224 +#define B11100001 225 +#define B11100010 226 +#define B11100011 227 +#define B11100100 228 +#define B11100101 229 +#define B11100110 230 +#define B11100111 231 +#define B11101000 232 +#define B11101001 233 +#define B11101010 234 +#define B11101011 235 +#define B11101100 236 +#define B11101101 237 +#define B11101110 238 +#define B11101111 239 +#define B11110000 240 +#define B11110001 241 +#define B11110010 242 +#define B11110011 243 +#define B11110100 244 +#define B11110101 245 +#define B11110110 246 +#define B11110111 247 +#define B11111000 248 +#define B11111001 249 +#define B11111010 250 +#define B11111011 251 +#define B11111100 252 +#define B11111101 253 +#define B11111110 254 +#define B11111111 255 + +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/main.cpp b/Marlin/Marlin/Gen7/cores/arduino/main.cpp new file mode 100644 index 0000000000..cc6e81d906 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/main.cpp @@ -0,0 +1,14 @@ +#include + +int main(void) +{ + init(); + + setup(); + + for (;;) + loop(); + + return 0; +} + diff --git a/Marlin/Marlin/Gen7/cores/arduino/main.cxx b/Marlin/Marlin/Gen7/cores/arduino/main.cxx new file mode 100644 index 0000000000..52351e4c98 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/main.cxx @@ -0,0 +1,12 @@ +int main(void) +{ + init(); + + setup(); + + for (;;) + loop(); + + return 0; +} + diff --git a/Marlin/Marlin/Gen7/cores/arduino/pins_arduino.c b/Marlin/Marlin/Gen7/cores/arduino/pins_arduino.c new file mode 100644 index 0000000000..c67ab73fb0 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/pins_arduino.c @@ -0,0 +1,200 @@ +/* + pins_arduino.c - pin definitions for the Arduino board + Part of Arduino / Wiring Lite + + Copyright (c) 2005 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: pins_arduino.c 254 2007-04-20 23:17:38Z mellis $ +*/ + +#include +#include "wiring_private.h" +#include "pins_arduino.h" + +// On the Sanguino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA644P / SANGUINO +// +// +---\/---+ +// INT0 (D 0) PB0 1| |40 PA0 (AI 0 / D31) +// INT1 (D 1) PB1 2| |39 PA1 (AI 1 / D30) +// INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) +// PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) +// PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) +// MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) +// MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) +// SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) +// RST 9| |32 AREF +// VCC 10| |31 GND +// GND 11| |30 AVCC +// XTAL2 12| |29 PC7 (D 23) +// XTAL1 13| |28 PC6 (D 22) +// RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI +// TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO +// RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS +// TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK +// PWM (D 12) PD4 18| |23 PC1 (D 17) SDA +// PWM (D 13) PD5 19| |22 PC0 (D 16) SCL +// PWM (D 14) PD6 20| |21 PD7 (D 15) PWM +// +--------+ +// + +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint8_t PROGMEM port_to_mode_PGM[] = +{ + NOT_A_PORT, + (uint8_t) &DDRA, + (uint8_t) &DDRB, + (uint8_t) &DDRC, + (uint8_t) &DDRD, +}; + +const uint8_t PROGMEM port_to_output_PGM[] = +{ + NOT_A_PORT, + (uint8_t) &PORTA, + (uint8_t) &PORTB, + (uint8_t) &PORTC, + (uint8_t) &PORTD, +}; + +const uint8_t PROGMEM port_to_input_PGM[] = +{ + NOT_A_PORT, + (uint8_t) &PINA, + (uint8_t) &PINB, + (uint8_t) &PINC, + (uint8_t) &PIND, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = +{ + PB, /* 0 */ + PB, + PB, + PB, + PB, + PB, + PB, + PB, + PD, /* 8 */ + PD, + PD, + PD, + PD, + PD, + PD, + PD, + PC, /* 16 */ + PC, + PC, + PC, + PC, + PC, + PC, + PC, + PA, /* 24 */ + PA, + PA, + PA, + PA, + PA, + PA, + PA /* 31 */ +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = +{ + _BV(0), /* 0, port B */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 8, port D */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 16, port C */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(7), /* 24, port A */ + _BV(6), + _BV(5), + _BV(4), + _BV(3), + _BV(2), + _BV(1), + _BV(0) +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = +{ + NOT_ON_TIMER, /* 0 - PB0 */ + NOT_ON_TIMER, /* 1 - PB1 */ + NOT_ON_TIMER, /* 2 - PB2 */ + TIMER0A, /* 3 - PB3 */ + TIMER0B, /* 4 - PB4 */ + NOT_ON_TIMER, /* 5 - PB5 */ + NOT_ON_TIMER, /* 6 - PB6 */ + NOT_ON_TIMER, /* 7 - PB7 */ + NOT_ON_TIMER, /* 8 - PD0 */ + NOT_ON_TIMER, /* 9 - PD1 */ + NOT_ON_TIMER, /* 10 - PD2 */ + NOT_ON_TIMER, /* 11 - PD3 */ + TIMER1B, /* 12 - PD4 */ + TIMER1A, /* 13 - PD5 */ + TIMER2B, /* 14 - PD6 */ + TIMER2A, /* 15 - PD7 */ + NOT_ON_TIMER, /* 16 - PC0 */ + NOT_ON_TIMER, /* 17 - PC1 */ + NOT_ON_TIMER, /* 18 - PC2 */ + NOT_ON_TIMER, /* 19 - PC3 */ + NOT_ON_TIMER, /* 20 - PC4 */ + NOT_ON_TIMER, /* 21 - PC5 */ + NOT_ON_TIMER, /* 22 - PC6 */ + NOT_ON_TIMER, /* 23 - PC7 */ + NOT_ON_TIMER, /* 24 - PA0 */ + NOT_ON_TIMER, /* 25 - PA1 */ + NOT_ON_TIMER, /* 26 - PA2 */ + NOT_ON_TIMER, /* 27 - PA3 */ + NOT_ON_TIMER, /* 28 - PA4 */ + NOT_ON_TIMER, /* 29 - PA5 */ + NOT_ON_TIMER, /* 30 - PA6 */ + NOT_ON_TIMER /* 31 - PA7 */ +}; diff --git a/Marlin/Marlin/Gen7/cores/arduino/pins_arduino.h b/Marlin/Marlin/Gen7/cores/arduino/pins_arduino.h new file mode 100644 index 0000000000..e0b7add867 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/pins_arduino.h @@ -0,0 +1,65 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define NOT_A_PIN 0 +#define NOT_A_PORT 0 + +#define NOT_ON_TIMER 0 +#define TIMER0A 1 +#define TIMER0B 2 +#define TIMER1A 3 +#define TIMER1B 4 +#define TIMER2 5 +#define TIMER2A 6 +#define TIMER2B 7 + +extern const uint8_t PROGMEM port_to_mode_PGM[]; +extern const uint8_t PROGMEM port_to_input_PGM[]; +extern const uint8_t PROGMEM port_to_output_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. +// +// These perform slightly better as macros compared to inline functions +// +#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) +#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) +#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) +#define analogInPinToBit(P) (P) +#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_output_PGM + (P))) ) +#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_input_PGM + (P))) ) +#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_mode_PGM + (P))) ) + +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/wiring.c b/Marlin/Marlin/Gen7/cores/arduino/wiring.c new file mode 100644 index 0000000000..1a102ae0f6 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/wiring.c @@ -0,0 +1,203 @@ +/* + wiring.c - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 388 2008-03-08 22:05:23Z mellis $ +*/ + +#include "wiring_private.h" + +volatile unsigned long timer0_overflow_count = 0; +volatile unsigned long timer0_clock_cycles = 0; +volatile unsigned long timer0_millis = 0; + +SIGNAL(TIMER0_OVF_vect) +{ + timer0_overflow_count++; + // timer 0 prescale factor is 64 and the timer overflows at 256 + timer0_clock_cycles += 64UL * 256UL; + while (timer0_clock_cycles > clockCyclesPerMicrosecond() * 1000UL) { + timer0_clock_cycles -= clockCyclesPerMicrosecond() * 1000UL; + timer0_millis++; + } +} + +unsigned long millis() +{ + unsigned long m; + uint8_t oldSREG = SREG; + + // disable interrupts while we read timer0_millis or we might get an + // inconsistent value (e.g. in the middle of the timer0_millis++) + cli(); + m = timer0_millis; + SREG = oldSREG; + + return m; +} + +unsigned long micros() { + unsigned long m, t; + uint8_t oldSREG = SREG; + + cli(); + t = TCNT0; + +#ifdef TIFR0 + if ((TIFR0 & _BV(TOV0)) && (t == 0)) + t = 256; +#else + if ((TIFR & _BV(TOV0)) && (t == 0)) + t = 256; +#endif + + m = timer0_overflow_count; + SREG = oldSREG; + + return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond()); +} + +void delay(unsigned long ms) +{ + unsigned long start = millis(); + + while (millis() - start <= ms) + ; +} + +/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. + * Disables interrupts, which will disrupt the millis() function if used + * too frequently. */ +void delayMicroseconds(unsigned int us) +{ + uint8_t oldSREG; + + // calling avrlib's delay_us() function with low values (e.g. 1 or + // 2 microseconds) gives delays longer than desired. + //delay_us(us); + +#if F_CPU >= 16000000L + // for the 16 MHz clock on most Arduino boards + + // for a one-microsecond delay, simply return. the overhead + // of the function call yields a delay of approximately 1 1/8 us. + if (--us == 0) + return; + + // the following loop takes a quarter of a microsecond (4 cycles) + // per iteration, so execute it four times for each microsecond of + // delay requested. + us <<= 2; + + // account for the time taken in the preceeding commands. + us -= 2; +#else + // for the 8 MHz internal clock on the ATmega168 + + // for a one- or two-microsecond delay, simply return. the overhead of + // the function calls takes more than two microseconds. can't just + // subtract two, since us is unsigned; we'd overflow. + if (--us == 0) + return; + if (--us == 0) + return; + + // the following loop takes half of a microsecond (4 cycles) + // per iteration, so execute it twice for each microsecond of + // delay requested. + us <<= 1; + + // partially compensate for the time taken by the preceeding commands. + // we can't subtract any more than this or we'd overflow w/ small delays. + us--; +#endif + + // disable interrupts, otherwise the timer 0 overflow interrupt that + // tracks milliseconds will make us delay longer than we want. + oldSREG = SREG; + cli(); + + // busy wait + __asm__ __volatile__ ( + "1: sbiw %0,1" "\n\t" // 2 cycles + "brne 1b" : "=w" (us) : "0" (us) // 2 cycles + ); + + // reenable interrupts. + SREG = oldSREG; +} + +void init() +{ + // this needs to be called before setup() or some functions won't + // work there + sei(); + + // on the ATmega168, timer 0 is also used for fast hardware pwm + // (using phase-correct PWM would mean that timer 0 overflowed half as often + // resulting in different millis() behavior on the ATmega8 and ATmega168) + sbi(TCCR0A, WGM01); + sbi(TCCR0A, WGM00); + + // set timer 0 prescale factor to 64 + sbi(TCCR0B, CS01); + sbi(TCCR0B, CS00); + + // enable timer 0 overflow interrupt + sbi(TIMSK0, TOIE0); + + // timers 1 and 2 are used for phase-correct hardware pwm + // this is better for motors as it ensures an even waveform + // note, however, that fast pwm mode can achieve a frequency of up + // 8 MHz (with a 16 MHz clock) at 50% duty cycle + + // set timer 1 prescale factor to 64 + sbi(TCCR1B, CS11); + sbi(TCCR1B, CS10); + + // put timer 1 in 8-bit phase correct pwm mode + sbi(TCCR1A, WGM10); + + // set timer 2 prescale factor to 64 + sbi(TCCR2B, CS22); + + // configure timer 2 for phase correct pwm (8-bit) + sbi(TCCR2A, WGM20); + + // set a2d prescale factor to 128 + // 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range. + // XXX: this will not work properly for other clock speeds, and + // this code should use F_CPU to determine the prescale factor. + sbi(ADCSRA, ADPS2); + sbi(ADCSRA, ADPS1); + sbi(ADCSRA, ADPS0); + + // enable a2d conversions + sbi(ADCSRA, ADEN); + + // the bootloader connects pins 0 and 1 to the USART; disconnect them + // here so they can be used as normal digital i/o; they will be + // reconnected in Serial.begin() + UCSR0B = 0; + #if defined(__AVR_ATmega644P__) + //TODO: test to see if disabling this helps? + //UCSR1B = 0; + #endif +} diff --git a/Marlin/Marlin/Gen7/cores/arduino/wiring.h b/Marlin/Marlin/Gen7/cores/arduino/wiring.h new file mode 100644 index 0000000000..6309a364fc --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/wiring.h @@ -0,0 +1,133 @@ +/* + wiring.h - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 387 2008-03-08 21:30:00Z mellis $ +*/ + +#ifndef Wiring_h +#define Wiring_h + +#include +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 + +#define true 0x1 +#define false 0x0 + +#define PI 3.14159265 +#define HALF_PI 1.57079 +#define TWO_PI 6.283185 +#define DEG_TO_RAD 0.01745329 +#define RAD_TO_DEG 57.2957786 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#define INTERNAL 3 +#define DEFAULT 1 +#define EXTERNAL 0 + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) +#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) + +#define lowByte(w) ((w) & 0xff) +#define highByte(w) ((w) >> 8) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + +typedef unsigned int word; + +#define bit(b) (1 << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +void beginSerial(uint8_t, long); +void serialWrite(uint8_t, unsigned char); +int serialAvailable(uint8_t); +int serialRead(uint8_t); +void serialFlush(uint8_t); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, byte val); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/wiring_analog.c b/Marlin/Marlin/Gen7/cores/arduino/wiring_analog.c new file mode 100644 index 0000000000..b98bb1a196 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/wiring_analog.c @@ -0,0 +1,116 @@ +/* + wiring_analog.c - analog input and output + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +uint8_t analog_reference = DEFAULT; + +void analogReference(uint8_t mode) +{ + // can't actually set the register here because the default setting + // will connect AVCC and the AREF pin, which would cause a short if + // there's something connected to AREF. + analog_reference = mode; +} + +int analogRead(uint8_t pin) +{ + uint8_t low, high, ch = analogInPinToBit(pin); + + // set the analog reference (high two bits of ADMUX) and select the + // channel (low 4 bits). this also sets ADLAR (left-adjust result) + // to 0 (the default). + // the final AND is to clear the pos/neg reference bits + ADMUX = ((analog_reference << 6) | (pin & 0x0f)) & B11000111; + + // without a delay, we seem to read from the wrong channel + //delay(1); + + // start the conversion + sbi(ADCSRA, ADSC); + + // ADSC is cleared when the conversion finishes + while (bit_is_set(ADCSRA, ADSC)); + + // we have to read ADCL first; doing so locks both ADCL + // and ADCH until ADCH is read. reading ADCL second would + // cause the results of each conversion to be discarded, + // as ADCL and ADCH would be locked when it completed. + low = ADCL; + high = ADCH; + + // combine the two bytes + return (high << 8) | low; +} + +// Right now, PWM output only works on the pins with +// hardware support. These are defined in the appropriate +// pins_*.c file. For the rest of the pins, we default +// to digital output. +void analogWrite(uint8_t pin, int val) +{ + // We need to make sure the PWM output is enabled for those pins + // that support it, as we turn it off when digitally reading or + // writing with them. Also, make sure the pin is in output mode + // for consistenty with Wiring, which doesn't require a pinMode + // call for the analog output pins. + pinMode(pin, OUTPUT); + + if (digitalPinToTimer(pin) == TIMER1A) { + // connect pwm to pin on timer 1, channel A + sbi(TCCR1A, COM1A1); + // set pwm duty + OCR1A = val; + } else if (digitalPinToTimer(pin) == TIMER1B) { + // connect pwm to pin on timer 1, channel B + sbi(TCCR1A, COM1B1); + // set pwm duty + OCR1B = val; + } else if (digitalPinToTimer(pin) == TIMER0A) { + // connect pwm to pin on timer 0, channel A + sbi(TCCR0A, COM0A1); + // set pwm duty + OCR0A = val; + } else if (digitalPinToTimer(pin) == TIMER0B) { + // connect pwm to pin on timer 0, channel B + sbi(TCCR0A, COM0B1); + // set pwm duty + OCR0B = val; + } else if (digitalPinToTimer(pin) == TIMER2A) { + // connect pwm to pin on timer 2, channel A + sbi(TCCR2A, COM2A1); + // set pwm duty + OCR2A = val; + } else if (digitalPinToTimer(pin) == TIMER2B) { + // connect pwm to pin on timer 2, channel B + sbi(TCCR2A, COM2B1); + // set pwm duty + OCR2B = val; + } else if (val < 128) + //fail semi-intelligently + digitalWrite(pin, LOW); + else + digitalWrite(pin, HIGH); +} diff --git a/Marlin/Marlin/Gen7/cores/arduino/wiring_digital.c b/Marlin/Marlin/Gen7/cores/arduino/wiring_digital.c new file mode 100644 index 0000000000..3d4b4ebd1c --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/wiring_digital.c @@ -0,0 +1,95 @@ +/* + wiring_digital.c - digital input and output functions + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +void pinMode(uint8_t pin, uint8_t mode) +{ + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *reg; + + if (port == NOT_A_PIN) return; + + // JWS: can I let the optimizer do this? + reg = portModeRegister(port); + + if (mode == INPUT) *reg &= ~bit; + else *reg |= bit; +} + +// Forcing this inline keeps the callers from having to push their own stuff +// on the stack. It is a good performance win and only takes 1 more byte per +// user than calling. (It will take more bytes on the 168.) +// +// But shouldn't this be moved into pinMode? Seems silly to check and do on +// each digitalread or write. +// +static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline)); +static inline void turnOffPWM(uint8_t timer) +{ + if (timer == TIMER0A) cbi(TCCR0A, COM0A1); + if (timer == TIMER0B) cbi(TCCR0A, COM0B1); + if (timer == TIMER1A) cbi(TCCR1A, COM1A1); + if (timer == TIMER1B) cbi(TCCR1A, COM1B1); + if (timer == TIMER2A) cbi(TCCR2A, COM2A1); + if (timer == TIMER2B) cbi(TCCR2A, COM2B1); +} + +void digitalWrite(uint8_t pin, uint8_t val) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *out; + + if (port == NOT_A_PIN) return; + + // If the pin that support PWM output, we need to turn it off + // before doing a digital write. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + out = portOutputRegister(port); + + if (val == LOW) *out &= ~bit; + else *out |= bit; +} + +int digitalRead(uint8_t pin) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + + if (port == NOT_A_PIN) return LOW; + + // If the pin that support PWM output, we need to turn it off + // before getting a digital reading. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + if (*portInputRegister(port) & bit) return HIGH; + + return LOW; +} diff --git a/Marlin/Marlin/Gen7/cores/arduino/wiring_private.h b/Marlin/Marlin/Gen7/cores/arduino/wiring_private.h new file mode 100644 index 0000000000..14394a0b61 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/wiring_private.h @@ -0,0 +1,60 @@ +/* + wiring_private.h - Internal header file. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $ +*/ + +#ifndef WiringPrivate_h +#define WiringPrivate_h + +#include +#include +#include +#include +#include +#include + +#include "wiring.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +#define EXTERNAL_INT_0 0 +#define EXTERNAL_INT_1 1 +#define EXTERNAL_INT_2 2 + +#define EXTERNAL_NUM_INTERRUPTS 3 + +typedef void (*voidFuncPtr)(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/wiring_pulse.c b/Marlin/Marlin/Gen7/cores/arduino/wiring_pulse.c new file mode 100644 index 0000000000..8f232f1d55 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/wiring_pulse.c @@ -0,0 +1,66 @@ +/* + wiring_pulse.c - pulseIn() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH + * or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds + * to 3 minutes in length, but must be called at least a few dozen microseconds + * before the start of the pulse. */ +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout) +{ + // cache the port and bit of the pin in order to speed up the + // pulse width measuring loop and achieve finer resolution. calling + // digitalRead() instead yields much coarser resolution. + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + uint8_t stateMask = (state ? bit : 0); + unsigned long width = 0; // keep initialization out of time critical area + + // convert the timeout from microseconds to a number of times through + // the initial loop; it takes 16 clock cycles per iteration. + unsigned long numloops = 0; + unsigned long maxloops = microsecondsToClockCycles(timeout) / 16; + + // wait for any previous pulse to end + while ((*portInputRegister(port) & bit) == stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to start + while ((*portInputRegister(port) & bit) != stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to stop + while ((*portInputRegister(port) & bit) == stateMask) + width++; + + // convert the reading to microseconds. The loop has been determined + // to be 10 clock cycles long and have about 16 clocks between the edge + // and the start of the loop. There will be some error introduced by + // the interrupt handlers. + return clockCyclesToMicroseconds(width * 10 + 16); +} diff --git a/Marlin/Marlin/Gen7/cores/arduino/wiring_serial.c b/Marlin/Marlin/Gen7/cores/arduino/wiring_serial.c new file mode 100644 index 0000000000..a3314faa89 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/wiring_serial.c @@ -0,0 +1,138 @@ +/* + wiring_serial.c - serial functions. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + Modified 29 January 2009, Marius Kintel for Sanguino - http://www.sanguino.cc/ + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + + +#include "wiring_private.h" + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which rx_buffer_head is the index of the +// location to which to write the next incoming character and rx_buffer_tail +// is the index of the location from which to read. +#define RX_BUFFER_SIZE 128 + +#if defined(__AVR_ATmega644P__) +unsigned char rx_buffer[2][RX_BUFFER_SIZE]; +int rx_buffer_head[2] = {0, 0}; +int rx_buffer_tail[2] = {0, 0}; +#else +unsigned char rx_buffer[1][RX_BUFFER_SIZE]; +int rx_buffer_head[1] = {0}; +int rx_buffer_tail[1] = {0}; +#endif + + +#define BEGIN_SERIAL(uart_, baud_) \ +{ \ + UBRR##uart_##H = ((F_CPU / 16 + baud / 2) / baud - 1) >> 8; \ + UBRR##uart_##L = ((F_CPU / 16 + baud / 2) / baud - 1); \ + \ + /* reset config for UART */ \ + UCSR##uart_##A = 0; \ + UCSR##uart_##B = 0; \ + UCSR##uart_##C = 0; \ + \ + /* enable rx and tx */ \ + sbi(UCSR##uart_##B, RXEN##uart_);\ + sbi(UCSR##uart_##B, TXEN##uart_);\ + \ + /* enable interrupt on complete reception of a byte */ \ + sbi(UCSR##uart_##B, RXCIE##uart_); \ + UCSR##uart_##C = _BV(UCSZ##uart_##1)|_BV(UCSZ##uart_##0); \ + /* defaults to 8-bit, no parity, 1 stop bit */ \ +} + +void beginSerial(uint8_t uart, long baud) +{ + if (uart == 0) BEGIN_SERIAL(0, baud) +#if defined(__AVR_ATmega644P__) + else BEGIN_SERIAL(1, baud) +#endif +} + +#define SERIAL_WRITE(uart_, c_) \ + while (!(UCSR##uart_##A & (1 << UDRE##uart_))) \ + ; \ + UDR##uart_ = c + +void serialWrite(uint8_t uart, unsigned char c) +{ + if (uart == 0) { + SERIAL_WRITE(0, c); + } +#if defined(__AVR_ATmega644P__) + else { + SERIAL_WRITE(1, c); + } +#endif +} + +int serialAvailable(uint8_t uart) +{ + return (RX_BUFFER_SIZE + rx_buffer_head[uart] - rx_buffer_tail[uart]) % RX_BUFFER_SIZE; +} + +int serialRead(uint8_t uart) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (rx_buffer_head[uart] == rx_buffer_tail[uart]) { + return -1; + } else { + unsigned char c = rx_buffer[uart][rx_buffer_tail[uart]]; + rx_buffer_tail[uart] = (rx_buffer_tail[uart] + 1) % RX_BUFFER_SIZE; + return c; + } +} + +void serialFlush(uint8_t uart) +{ + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // were full, not empty. + rx_buffer_head[uart] = rx_buffer_tail[uart]; +} + +#define UART_ISR(uart_) \ +ISR(USART##uart_##_RX_vect) \ +{ \ + unsigned char c = UDR##uart_; \ + \ + int i = (rx_buffer_head[uart_] + 1) % RX_BUFFER_SIZE; \ + \ + /* if we should be storing the received character into the location \ + just before the tail (meaning that the head would advance to the \ + current location of the tail), we're about to overflow the buffer \ + and so we don't write the character or advance the head. */ \ + if (i != rx_buffer_tail[uart_]) { \ + rx_buffer[uart_][rx_buffer_head[uart_]] = c; \ + rx_buffer_head[uart_] = i; \ + } \ +} + +UART_ISR(0) +#if defined(__AVR_ATmega644P__) +UART_ISR(1) +#endif diff --git a/Marlin/Marlin/Gen7/cores/arduino/wiring_shift.c b/Marlin/Marlin/Gen7/cores/arduino/wiring_shift.c new file mode 100644 index 0000000000..956f864297 --- /dev/null +++ b/Marlin/Marlin/Gen7/cores/arduino/wiring_shift.c @@ -0,0 +1,40 @@ +/* + wiring_shift.c - shiftOut() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, byte val) +{ + int i; + + for (i = 0; i < 8; i++) { + if (bitOrder == LSBFIRST) + digitalWrite(dataPin, !!(val & (1 << i))); + else + digitalWrite(dataPin, !!(val & (1 << (7 - i)))); + + digitalWrite(clockPin, HIGH); + digitalWrite(clockPin, LOW); + } +} diff --git a/Marlin/Marlin/LCD Menu Tree.pdf b/Marlin/Marlin/LCD Menu Tree.pdf new file mode 100644 index 0000000000000000000000000000000000000000..5e29d049509ca89c600be33a1ea21b2edbc7d1e4 GIT binary patch literal 217464 zcmeFX2UL?y_b;j9`b3@i$Ew#3p<%FBx&aV}^PRg?$H!P!y7Hovr^LM(DdaTYFle-S|#U&*+}PoUuCNcEYu4HU@@70I>kl7K>HV6ad9xv{w5?Y0S4ONolvm&zmXM}1Ox4#vC?4i zKLY+1NkSA1w7+{L#KA!O7bOV@7-;`=LctP$2orUakOBkkpH6A8#6OBdM8QD&yAvV? z2HHQ55@5)`*#QCt1MQz)DKO+8J3wT>KqGb%nLN5M6EF>6=$Ejz*Jzd#AHN;q2gd^ zh?ua9_4z#aTYK6N)|PZxmQ@9p{fK?EU!bVE70yAb`w3MZn95K%*WVXV-G z>M8(vB+Akq81iSM{_!byu;{At^q@nalt2VxGe^2U?zxnuSmik+Lli{c)@WM4OkRjHt5W|t8$UI*g7OgtW zc(Cm|usr?w?VjK_ed=kp`<^d%3>R3OV4JCtdm& zXx`znL>lfyaf6NQ#v3i_-Nma7me^-aP<;8BZQ8r>E1z4a3eJ5ZJ-tl2u}uRnIE+oh z{>+mVx^fliBs`yM>cvWHoheQx&=$`4!Un@$E0dgr`nmSH1N+tblaZR=Q=4m|YO&7P z7cNeeqeo%Cq~rRTH7++!x~4_%G8TlGLv&~57qJZd&`nAdRVTs?ET2G#W@x>c10l3=GF>=kqx>mp@V(kg7 zmIEg(m>e%*+lQ9047=trj}>xaBkA^r!h(|$MwvAyir*+8AI`R1%aZ&>JA1c0$dpVS z?GoR21$yGalLUD_YeT=1B_~xA;cCP8V<7=KMtTc$ozo)!0xOxrj|-{~3N)-|$dqrS zYH&f}mq8UsinMQ)=~Xr6bU|HR{WCBe0}EpelW zaCR?WeAazTzKyPZ=mncRA&mD+LK`=GjPzEowSRD8(uB6h7WBG#C&irR_qzVQE6Z^W z?-DaR?qrs5&=E9mUSZs=IB(2&(4wZoetr8U^}5v-XQdn4xnR(cn0{f3%@0>7PCZbZ)R$^YlELxL4jO+Ms1aOT6>b>rG z>LoaCQgY(B!FJ|;JEbML=I5$Z#&4uN^Bya;`8c`UPzLP+lSvHk-PgTKea2_)N*TB!2My|Q@?n;)Fa9)d#RZAMoe zU}sB~Ijn0VE9@nub6T2m8J+Y54M$68>OfCg7|9R7q|j2y4Yeo7H0l1BWs_4_2BlPUK(`7zf}g-R&*c){&M-`%({%*f15r~KTxB)$7k zR9Q^^?ZI{9%QHCw=&Rq&Tw~wn%|D!rA9*ADrD}0G#0&blP)cQ6^XF6Y86_JZit=e2 zpWrnO-_4ENPusp+%Q_e970e5bDQ9bVyWV@>hkRP)%2Ssf5oO~SHv-Y#RU|Wa?v)!B z`?q#Ru`V-jQn?(EN)`LKd~0HO#^vRm@t*Sy`g6Od9ezVca&bxHdKWt(>WMGAruAnD za-9l6ZgEX(IuxkeHYnL{QcQ?NfG#{wb=8EfoOa+I4XO;5yxv_*FO+zRoJ}h`r$14# zN4RNxziE&>w}3r~mubuyu#RX>W*P^2{aT518G`qk>*`OJ zP@mhE=l!R4c3X9qY)W^P8ec9x)xPyC**3HC_@MlY5~{c5Y}QNCkM3_O=d8_43~F9_ za$kKneN`!yaQR!qj7?tsE}wjWq99D$@$>6~8+wi(6-c57T+UeDS8qsOEHY`p7`Tj# zzc%?q!q@NmYO;UUS=N`2Tz666iTD+6klV?uswleN`PURDd$3makFsqg;RJW5g zEq_k*rZ&v-OQ%1bp9)E{R@8*0m;9z-tS~egjFI4PfHIX@I?Z6 z_4l`WC`U8^wM0}^DoNPtz zV4Rel+%bPY6KATS-L2d(E*{Qq;6K;`hH-QEP_;w30e}ZU)qi~!6Bh@jTYK2KgQb3> zj(< zNs0m}1nqbmnEiXa%HN;|pg`mcpdF&201Sc#0MK6`>z|5&i0%GE`M+TA-;4GePW~|- z7%B-B`AY~1DRBTrIXJr^Tu@f%f54H53dX}-AMK{1!GG}I{~8@hiitu06CJI8e)3{N%jn_I4fV6P=tUkzo@+YQmfhsowTsgl zEz&kjupZ!@UDF%u)XE#V8F1#m@OpQA#IUJYNq(_Z^iZ7K%yxI&>RP1;?BVl?w%8|q zO@n7Z{p^`(mb++D(Z01Ht+x{&Y2W49T)aCVY}+nKZPa_-4A**sg70-dO)`L~>l68X4ha12YoSuybutn^6!#_MhJ9rSJ(*`OVP zIZa_8)8?4@`26Mw{LWK0oM}tEKz~zTPy{Qqcwyy%(dnWiF2x^rjw>yZHyxys@Gw!X z6j4cj)Oh1=UNhMv7N}RaH+J`7b6(LYiD-jXWhr{rGu*of8#%zf@BLEiot*9pVJ#+* zHyu@a)h_=t0<&99-Jlnkd*IEN-XkrdQ*?ex#TE|?kvsPd z>x8%)3woWFNm3=7bGtew7BA4AWjjeI6UJOBOUck1bux^Jk&~l(#r!FMQPk7ye)E~V zb`iaGLIG4OBN#MEZ=MpqW4HU0R=(%Cspo5ht$2ez@6l=ciz5?a2i%*Aw&bsP4Kubz z>zj0s6;k}k&q$4#zxqZ6m7{luR2AOPp)p#mJ9o0xUPNW8>=^^(=QGn((05$xC#QCO!{`JG}`66PsDS7?zf%kiV1 zwyRFhH2u0`Wavu8m19utGl_7e21K&PElP9{W#m#}wr)!vzah8(Sr|sc2oMQcRHrY} zhgiH>=jAD|q1z%#`U>gGe?qdUsG4H5hIEaNT+>&eB5-mVCEzn8{XZZYbgPY0`~}a{ z7keI1dUCkeh_e%{%6_pIH z-91|yJ)plI#?$B1H{bR2VpZRHrNTKke2~KaFl5Elk2|q+ZuXG-&0#9uGXXVMU0Z z87rIvG4LZ*Gp1e6F?>KQ5DL9KiyRT|u{JYG@2;dEjP4dJl483A{VLnUVSyP3cktn& z{Fg^)y$@rYk2i=_b6UqK2l83C!#sz)X2sS~n_($7Ygi6_4 z?8`rSSImR(-{3|I%I2r%xZ$korv``e>A$Q?9i6ckM%Lb*H&#*2o%AZ`&G?Sy*I^W5 zLgwm!l%Mha^kW2#>uIiJx(E1^Avd^C#!x*hQb?a%EIJe!MTfjtir3`?;L(=Xz z`RcFyr=u5e=VU(%!&6IPT_YLt-E{H~<$ED_A*{)rF-A7%w#&1z0ZK>!RJ1d0^T6NPcaQXp^~Evu2KAn&`ntAa z3CvHEF9D=YjKf3Ia2)eL!p`Pp{c?)COr}G%;yq zymnR2xK0jNhwrA`!Ji23{(9%1cDe8ksX#Km3m`c8sA|PGBjsX->>YgEB;@eLIX!Q$ z>;tBPH}m-8tQYv+Eg*=hCfUsJy|Ye_>7m!k=#UkGCx_rCd3|FfHLvIkvKJm*LvC+3 z9{q@uXV^x1ZpNFW$Ck#|l<2ic{=8RnN;cKW0%(9-I+t)H>2UPva&;%Xl5@nVS{_=g zrvSLR_F4S5$AocGtqkI(>WgcfTcxLnV+Is2?D?+0Pb#qI2hV8IK8aY^M*42jpBk&V zdG>tQ{Y!f&y+EZZH&emn2lbt+H_`bAYqJECYw-S8h+N&6C)+bYc>4`tuhRfK=~h|{ zK7-e{eUyJ9e-elT1`oTjaz;i4edk7Z0Tw_E=8$JF=YLkJXXJQ=2V5Xv7^Cu2NWc4I z@66Hqqr5F(_uQH!xc@vMcj0J5cp?i<0GT5P1^`Z}^4xdu3$Gre1N!iurSpIZY+pCG z2@+^R1$Z2B!Bw{ayCC1ne&zU9ct!tJ5h6z2FNd*U7BJcUG$0gvcr4IkMu2E*3~c2V z)q*)7TDaOT@&_!$Uqo!q9g%E$^#3-7H`hX;Iv4zhB=o90I%6&UWB!B`rRW4M47BH0 zy7vjL9u|xLg6k>P+qZqtdLHsfU0^Ha{U#vh?E%F4G(=wWlwzuL6FIt}zXcf_m%r77 zrpF-U;ro)B7t0J-3y)|Mx)Fc`rL5f}vOxTc<2rk}MGp$N(Sx*fya9ao;1j{?=LwSw zhZQFfk+(CxcOxovZ}tXIzghRa{6q2<;4N`vXB}g-7zHx%KG`YFY(MrDn_bd_s&(z1W*RlH=ORRFvis1$(Vcgvm<=v**pKJXyiJlA`bMm zLY~|F6Km4%;0y#G8X*D;?f`IJ#e;3gLgOQTAadmZxJ-bsS;M)o@)QRww}>Ghu6}w) zepGSdNsVUG!&=MS>tRI?nt0*3YMiXBPvio>+a~?JbP(VIpHC=ipOwc@G73~ERX4K5 z09Mf7s&dPi+|8e;p?9edm-iQmm%oomm-keh=q=VOI`4qIB~YgXy$M9(ER9s`HvJK^ zL!0kqD?sm)Gd!$!3*OXl26Kcv_9F82E9VirlR(tG@sPV~q=NkguP>dxV6AHRNIT%7 z3x(@eW!*JBA>?pJN9@}Nr_@uO;{aM;a)N4OW!#>)w7G!)iRGAz?qC{4`V`EmgVWQ3Ll4Ej$jEtY^E&xDjb zcy+WqTlhv7z&aM!(!(M-Zj#=-Dz*z(B!)LBZn*tlX~Y}AF|#YVqQ_D$9K5%Re1M%| z1q^9v>xu(HeHj=Ri?_^(4O}Z+@-5psPyd-4o_bN8>vRF=1x8u@GpZcd<9G4RdWjn@ z*jrW(9^>6BVIG!%2MF-`Fa!T^=NP%*TUDkRTaLrvtZRlb^Sn6O5P(NR#NX*8me)cV zu-4XjA&tLN&>tcGn$87(7yNf}`zr_i-%0;}83M6|6hd+t_Kgl zdP5}PnJV1dRr~~w6Zkq1Yg<@>D5jg*w6!yupCj*2mM%}k8UN{SO-!qTz_jDVz-~Ix zsry?yEFqZyj2^j@`g`p&)c$sk{vO29=dJRXbL@r8`8RJj841HxyZ#+{5QrIlbP==d zw0{T4#n?=I*AGOQ{μG!Z_j01`NqcT{Bg(LHifvNb91uWLcvOt`-{(^`eRKc#0p ze(nzHNhe&rG;xWF+i+7aIk}7jd`L_HUz^DfyGIt|E^qB@$*<5is9V!_ja&!BoK;v@ zLE#R}3I^nV1~R-^-{Uvt`x;EXTsI-%h?VwPJz{sbo3TrBFC%}c(70exqrd6XL&}_1 z4+0Mk2wi87G&9EHjxrlXkYezC700creHXRG&s%`-`GD~B3~lkwh@)A|_HEo&+~rJp z(wi)oyGMqeXR>8h$Sq=;m7w%mxes%`T*4qmSGnLcPU-mBa|!(M8ZB~Yo7RAbYPWfD zppE6g{e1mo@7{Uyu=T(i`E9>ayuK`{h(Q`jizJ)E#M{M^t-W6s5_ADT=(!CbbW#D6 z0*%~ws*Ts{l5oAKe&mXI`U3xk7p_QvFs^a-89fD%hPNQM12bf2ZakBpc_O0!L*+5O z3*@S}Bjszoc3xlJMqq`Gaav7mV%9-L0`aCTuhd}5cT=%<@O{334P8s+(ToMx!VHCd z9%iH}jOXW!YG#BBF0R;q{{F)DWEHVhS}!G}->%{bqx30Tcz@vyf2HjDb``GTWn}pTbgX*SAL%(dXuc{VLcvNWwZTTR;Zh>>yAbD(}7gBuo5iap7|Xphdddz@Uz_4 zbHL;IM^=s78Ef4mP5QiSH=|9nBEurRDSfhYvSXZqss-|O7USiz3LuxFnEjo5>;P`5wgd zxI9f@6B9qMX^g7RnO&CnUaRGh`FOko0>z2i2ii zMY4ptV^5mwXjA3KO|wvWU?+?(`Nq%{SZ804iOi++DapxprO&ra4KF6zc*~>z$H)+{ z+CcT3tf$HFJo(}wDwY~irn~fYr2tr;g?+Q5%QL@JfJ&-cXK6rwJ++2sMB=cg0!80M3`WX3X!W=1h3BRh?d-0G71rs} z-N6GrA2acLB1*u@=cocoNybci3&aV04X&Zk3pr+<=u18(Y4lH(RM$%$EnNKwxSV0Z z+_$ekNLLH=li7+S4ITT>Wt2z@UPl4Nc&cRk9sI1|*Ncjt2h2(MaJmAYY;hvNSb>({ z#0!5Bv`%_384oybp(Nah3b{zL4KVi4emVxY_hbsG{9V`E)~)fltQzN$#d5O+|E)JO z9SQhyD&*blT_P=Zp@%tVD>$Hsd4LM(uK>_ZWz>fV%zk>^=w3d7QbS-MQYRr61r)EM z@MOtu#D{a9JB%|YR|T43>zoNw_~4dv(jf4m!M6V;hPEna#Adl!+v-l2{IN7DsOOXx z=?>UH%L}lWBs8gic1+a6AU_!#llL&s^9z3#eEva-Yf?F$m3uZRJ?q#BQOm zKEqzkTA8=;p?zM-l|=cKu0^%x)h!qT~A)_7&rIQITu9F`W<8UyZ!l z+L^D_Kh&VPmlYc(@YZ$5-#fLLX)82VW4D+1bYdh&H*}4h)w&S2*}=e~ zuJRe}n-(%R+-|d$28kcK0%VM|5$>rAz)?vbXA^L20}~i2%&<7?j7a0^-lwBRsHQ$( z|E2(in}-YOx2PE15{N6(C^>WeX}FHtb<#G%Sbk#jG(PFbyM{wQ>Wwb9R4#g1(U!& zmt94Q87bJza4Usv!&-(mC!Q4+i86dbrs5}tYW0@RRRfvAutg7T=xI{-FoHraVL?sc zHjorg0QYOsKek6!=qKy7BStND*UurPo$0UAWaglZKILm9MLIq(0zkQUfn|1V40f52 z@bw%!kD~FM(PRYwFpn=nzl}EG=;KrQZ?D#ojwNS63+noJ6Q2GSK5~h_3D!=YCA>Z|@?U6=B=c$-qV^0>;P1c94 zov|Ygs%T)d7J-7fvF|xvq(nAh7a&839oZpo(tn?C(pxXi;u~do}&l3N4 z5U!c(fB%e*q%So>^zhu-TEbek_U}_~(Moawe3HM(SxAb4VqMo76%E*Wx6GP&T0ZM( z^Gv}EwTq_J5%t~tFPy%gQF?NEc8%G(@_%}(M7$^X|Ll%J-3^5Uu30=h(0_g#LcAdP ze|2Z^zrLps6O)jT`R^_&(jzjBj9!GhQ$ z{l@VO;kLoc&t7T!a<(OnA11y}9Tr8_Cmv3}Dr;_j=)HPa(zsjqOW|bx=G9Ku|E`&~ z1j?3VjRx+L=ZxZ|v@kz2k6Y}1u0$J}9@}zUEm7pQ)vq#*6Dm=p`Hv5DOz5QfVd*ee zOj;{7!+mzQaDkFLop~%?wGcg&DSy9(+P;V_pBQt{JrHl3#`8rK9vl7|Lh^0Sl-lHg zu7G6~$=zR?R>ZP9T+5*vs@RArf*h|HwkDX%8Eu1iA%m$c+VcU_mk)MqE@;L{bew!X zU9WnYrXb@C67HY%?9S5;%v`#Rm)#K5O_2>Tz-taKMAemEJ)K8(`lDAzQmO&}ede{?>z_SeR*!G>_=CRdz1@|PxY}-7H9N}{&Sl5NuT4%S>CH zR_FAN=j?7pF-2B5#LZlR-F&;g+>YG(+{|?hUW`Cxy-Gc+yPcOUe#~N3KaPLE^Th-& zI~=0RChmFgBYX^^pK{nvouC;-G4b-{xUH`+su;nx(vr{9zLzciSgOkAIcnqrrl2p! zAeqZbrJ+E~KXR)9!RAkCJw2GFGhHD0tfLr{0fC~~pY#~NAAG@lqmV;{t6>?b{-CT- zQ_N@iDXAV|u{=eRK}+J%1Ts};PUjJ`0G+4iu@C3&QNS9WW}N9eV;o@ zpoRIsvc7)`Lbk#1Twk653j)gUqI9drKUfFHQV^8g$ePfPNaWtMEF&(AjS=2GWxKvDQz+Ob+ zDn4yIZq17v9e$6N^S()E6W2~nhOpG3=UENDD0xHtb0J9XE`tU^%oRJ`aHRxyyQCY= zXKMAtyL#B#CQe9qkvfvPW0-Y_`QRlWO8=ui4}kb>(kq@|z0F0Mr-dKQw2N`VrgXeW zL~i*+d`A?B1kEFcTBdTmtZmbu0+kc*ByvcrlveY8f0b(>_wiN44i61$sy>6Z#Ae0k zLoh05q?;_P_$Y*y*U&<(7eIOz8Ue|n#+VaP1os^UG%V;|tdYFfp z0pkU#^wmL5XpkBkUBtA`P}RzZ6dsM7FrFnHGZqjDYL*IZpv_3}B&;S47&ba@6v20~ zKS+9q2d~=*P0}CL%9)Amt+9xMxswf8#}~4YmIJ}FFtd2h>0lr+=5J(5ANve>OBR!%d`5khhB4ls+# zPgwO(S<9ngiiB5CBQ3;C@On6mD!QL1Iyo!KS_cwdk;L)pPN`X3*%-g}gD7buiN{-N z&Jchd(Uhk4Yj5&D2;a+tfFP#9j*{1GMNPN4(f!?!Q(}K6l>P zL$46ZY|sS)=7o5eeJl;+MTHQjx)#}7 zInI_5>;w2k@$I0J^{Zfa_^1ocG8T|0=6f*}NAoa(7OB%?l9C1Qhxcf7JQCZvb-zX3 z|BlaxLRtmGQH?dg{;+MbNsXFhL6oX}6103Qw**#F@!RE~LN2!#e+ji@88ZzLPP?B4;*74IHMSE? zo27P#eWJF6Ee>M^RILCPjDgqUwijoplTT^NX_2MEeh2 ztLK~>O!X|5BJhOM6f2MEVCElM5^{&%3#Z|n_6IGRCKZ@54xW)WnA<4A$k>u(Ldc?q zazh^X3^FtDbOpl?161A;?V6+Nq5eKw>bu=!vFYQ>VTygl%B(geEe|R0*E$7Zvmg$T za#DEOdzFwckc+=*AQ9mm1)>7lzK7)25ePQ7mjahRUv^!N#)JT~ql%L|&xVI*duKoP`Ywl+ja)oMYk@Eu+hJD#UUorkl&y$! zPAPR=%weqb?%QxjY3hRH2~vSRe9-q_MX_Wfg>Pj0Dcdxu`VYLP{Y6}P1UOrlmySe- zSK`|T1_{~H%Bd;P?~R882m1CNO8r`le0})a8ac1x&iBXG$fV8cbOD==g7ftpg3XQ>4=`LB`Yc?IfLI73tCo z`ExpENdni95tLlhNs=v~6<}}ybUcd-tHR(E3EAyW@X@Ao+TDqT{aQzY=u?OsB=UO; zpT1`u;W6f{=Ha9%Dl;2>f7s}Pu$n<*Vj(E+Igi%*;{h@Vh#xYPoFZk7qfbhwyMz}<`@h$v>(LQDiuPK;QcRn znwIzHw12RuycsTDR|iSw+yc_@s}DG}%X6@AG$ku{Q>s1lU>RJY-x|f>3KI^P9h-~8 zT}}P45XP(N$^&4Vs;=|q57JjJEZQ}q#=-W%(BZHlY^~=jfO?x*N}HZZcm$;T*QH>H zr$UmHFKZr|m1pF@vcqr-y&vXh&@;YZ8I(pCMc!D~xiEnSgYUn#bfpD#$Lk`RAnIuq zL~t3N2RSfP(*xnc_2Xc7cqh_SG7YRu{bxBTfAZ{rK4)16Y31QQcx|YqNR_$2h2+pB zcJTMP#O8m{i;IKF={7>9G3;qm=Mv(0K4K2yZ3^g7iTRk{glixVIM)Qd+L6yZppAUyK(+7bpn1$SU2uB z7?!~7>293NOnv+24;sn8=$uBLi{I_QH*O{;+B}r{wNujzP!1zf=F(_OmkU7XHSG{g zM52dQNjN$drfS+IYZwURx3XDCkiMZ?%(UU7*#@|3)E6$c z+Pju837$R6%%gb3i(&<=NuKTPCMF6d|%0;|@m|_-h80S*e z1n_$M9zMNaK4{l>b*P-HwSdp|x@~&JI7^X|@>N|{id18Jul48qp(S?{osN$&$3t5% z&A9!TL$M!sLgSp>KA6`Umxg?;>EX7s%%&JnL-#QsE@VohHP;_cpLZmr7~885EWV9t zf7!u@nqYSlLp!YlmYWKP?FQGTdxg(3~R1GhCmQAmX28R!b+9FwcnJGClx7`*Z5sY$e7EdENaXFJ3WA9Q- z3CqVBW|a1Ym^4W8>9szAXyK^`Y{iL?>MYc6Db-k5ZtakA>>=>7YG8`ACrkhcgjJAL z=L39N@Q_ zkFon2UymqO_Xc*MD15uHdf4U5qDQR%r{KjbA-!b@m++o0<5&YV^Ua{s1!TkpuDN@4 z#a5J)?^5P1bw6f@FhVOl-4$I|oL)jcC^GrF6hIniZD=~09F?uY$YfM)nZ*TkL>ITa znEvJ%J_fcg9y2C%jrH%p&%3Lo>(IKw*_*GO6Wu{cV-qJGQl87AYCa4<$pc(kiC(>` zCH^G%R1=X#f03LrmNT0iyHx>S-`&5Vs|Qqs7SRcfXw zcM;-S$WJ7P5&j(y*^T>4f(9;wVhHXrW z92Cxkh3UOw;}p?!uk|5-SpNikAR_Iu)l1RqJ>D_ji9sMziHEk4!o-~&om35D;=7GX zhnKt{OR!nlGIEt&pMKlC4F*NigQ)S(CCtUGu|2u3k7nb!t9ggWT({9(AX>gLP*qAu z`k_gfr(%g|6U6L0R4--IC=}m1uQg4cL*98e1ub~HbA{_r@;2UT>Wx^MuzAb`mly)U zxNnPgA!N#diEw>nAq|=Q`t?!(=kUUqGCHV7T*e=3cyYxiYQ-RTi{(`|JTfj`;3+ zw@*Os$;j&el|6nh?rh%uB;p<^yV+PeT>S2UAdLxNYwo%MIM{qoVyEl;3uo64>CGA$ zw_lRy47+&8YNy2ERjC$T>e*NOE-EJ%3wjg7GsWc5rO1BIKin6J$PN*Ql9*N@==M^N zRDGR$C1Eq>D{~xABb`$)L^gdun~JtgbG0uzOJ^+MEinh3cXZMye@qg2f6osvzFtc7 z-8ZT!{tXi&D;~V*7xg{0A1mOi|YK6u1e)p=8v{1w54(T3)}Tgu9cCEtlXiY>>@!VwL?jJX_fg6<;eJ}P^>(ec zmC(_ZRVY8i(Dt`;j{>9MFKM1c6F^lUVf{p5cHo(Xxm9Q z)PA$E4(M}TL^wn;>0XLfmlj<(K{R1;{PBpbYF=FrfDD8x3tvbS3I@6Z?i6QD!yE5` zLVnT54rD007OxD;r})JjhV30QXymX;nSc6Jk*-i1r!X!+6C55*cEi{PK@_4{4oJ?L zRbN75g`;kV9CvHcq`2^=ZtmVV*veR&YPdpsGa|t+{m>xMCRe;QSH@fUb%^_Ll6axu zsSCi=YLcM6z4Dc6$&@?VKSoZzG%XgF3X|Npc=77$2Ku66puy{qQY|1$+z4CD;E$`{ zg5!k>74rKP3W02rLusC%jfw|BzDzqQYRnF#<8o}Y{480T2iAw9tnY#FqHVW8hr7*M zIZUlT98+i=rW7LfFMVm{#%+4&GH!4L*7M)kvn7TGb3GG7U!By!0Wd^S0{nrgX!vl_7#I0 z_2>UZ4GHp34>z}nDZNt<(alSPyj2{3-Fy}-La2r0P!kISjpsJsPe>y6!Z%kcmqhMU zu+~hGzlB7jEHDdt#@-u(iF>U}Lv5cU7PN(g`}sQZTqz}D^XfbgpEhW1KOvew@Qv6grgD60GB8L?GvZ|>%jc~=x$gAM9TSdlkfMXOiVOJ)j9su zv&YhQPXrM@aCEfY__oIRvj-+kk!Yr<^O)VWZ$|~MegQuju^qVIaMXFz|Ho)`Y4h>M zA?wY02#uu$CZOTRvG+`X|N1MDlbz09rVr^do<|zaAJx+jcY##|5m!+(!DhO(-C4xE z+Uxjj>YM8C9+(sz8I0E(=TAEu2i31$G&lNukx#U#`dv$T4eKPyqbH*#wiy@lR%G1P z7FOWG_YNRyQ!~ddByzvf-~QSd0*!=E^PPGTMTY~TPrdd2MJu_%dee_dasw`Me{TWU z4C)WIhJ}DCwxfzaju()H{7A|A5dEEC&LN) z*d4vS-SoHKf6NmogD#giir`nZ-I#84zxzD|h(vBH@_8~-+do<^%6WbF3H;VU^X&?T zN0<3@^1B(XJCB9ocfA?`u?jfstF$uL$W4B0F%*jy{8#`vcwg~r`7y$_+&#jOQ(MZs zu+IICSrNtLAnVsmB9JKROy+Y+Z?+R(?8xn?SO&e@eJmLf4@#rNJ=4+YmfhKNM@ z?Ah}`5Q4jj;)VCNR-*=6tL%^2CRvTEt+{0fZTW8G($i~ z{XeV7pPj)(HOrtipSfPpQnl9s)m;g&vP@Mh_tP#7m2$TKn4T))H>O3iNM}k@vyob3 z{hfA_um_}|2T{r_vhIjoM@UL(XVu>}ynj(+y5uQ8G|7z_jp zrl~J$uyC3@S{s&^ek^9dg3G=N)PbnMDjiTcEKk$CU?| zIUQ6BA8)U`$2Fb_Q%J%SSrK?GFwd+I;c*26j zvIn{x>JJjCEGR&PSevD{l{R5LQ7T`z;LsP*+pZcEl>kDE5Xs1&E9Edj^ z7@C%yr@^{7Gvy-?xk1p2sgP#e5rwZMzud0{DSUt0jT!Yp!^#r>r48CX{4-zUzew>Q z`6M4p_2?3@{ZNv=t+k~8e%K$@8PCMhWxc*T%;YD)nx2UIE>=nL_I5aa5d2D1M>M_A zEM+t8u6DHia)+M^gQDBf!is2?%GkX`n-DCCd$4TJv){!FlLt$(j=6a=yBiNReuVcK z2a0B6iuYM<_3(S!sT&DEeZ_v$)2~awZ*TlD0;LpIT<5i3-&X+W7yetnD4qOoA76*1 zQM9cP9$Q72gw)CTm-$oWBiwVdp?;R#Op2YBORz$me`_wkA(pYJ8acBU-wF5qRY~do zt>Yo(SQ$;ACj(|1nor+HvC20i2ZS8@`=T$J_CY=O8V?xcTwKW7Gy{HTg+Gp`;i*V}n+pk;vCaZq>BfmU7PUq-82b^RV zw}i%)0f&dttWkvpPydukFR40W!}}7=HTo=on+|{L@j*qN`FhH0^~V=V>}k;~(e3iq%~%nZ&v93ijoqVnR6Nva zA5u>8HgRf=c$zxb3z5jzQ_f>KU9C+tziMn2 zb1QU!qnPR9WqN6KY;#Gqb5JxdQX6aK+CT0}r-Qh3cMshJfS@*0Xi{gx_Db|6kH?qS z8Pl8&ZTJw$x#-7;d3U_fiWnK{eNt8*#%q?dQQ>|zDW{!r$XA<-Z|U+80{!mg!w@yl z0I%=hjcxwhsHzmZ{-9^Ho}Rxd#?z?(DDnY7(Vfhpm#u=uc};8|ynRa>rb1#nXje@3 z&4cn;Em{_82J%1RB2Iq;qUM{(qP;3l4?_Y<1WAjMuf9uvhbJzX2!d(P?ME=64Mon% zpfW#1PAqNwH<7szd{6FWXX~Yay*qw6Jf=Co5r8w72BEJ)AgZ9yWCSM~Rge|!L*i+B#Q(V`DjP+OB#aEERD;EW#*WeF~ zLI5Hrbv#!6Cj+7{gC*x^-UrDjv*88QnD(~1O~iQk=wOJYlPC#0$ORy{xM=2lxRe5> zS&F;WPpzn>M93PoP;yi&xoj`H+xuvBb;H0JOxrI*;|;#J?pib_gq8`Z3=_Eoi(XmT zh#jhGR!vjRo_O@-JuD+m97W}l>o>C| zaZ^r{O1vrzNm%R}%IUNlpr|Fm**!xr;Q4wr({A|5c;kzBePMKGoU0!W8%OJmHJy}RC% z_vOx&iks3~9tEwn6py(L<4EBw_HO^!^EedayTJK?m50gnYi=3 zh8b5YN^`7At*N6hoi7{F603dTKLeG>VFLvcVs-%^vbxQN-*d36%%fAt6L_jpTuZS` z;m{P|kgoTRn_8jd-5LYdpW%;HJ!feb3V&o1?;U>)F)p`;8URM)rAzo?XIgi)Qqvul zu1sY!XqSVjg21C6m+*L@sQC!Mm6utihm1P?n*tiX_Zq2=pRUoKi&$I>CN3y58!BD$+qK`M1N}Pvv?pnpYZLNT z*vBoYtp35b6gH#4mDCrjx&WHvqZAy6xTLP$&5^u*sqm)A%{8+UxWk>GRCiU-@-O>K^YwEQO1vsE2SyBHjHeINBxV|A0`YjttebAi)yJ{Bqd(m{tfJw1za6ydntt!2PYZI8J=5F~*uWYB&5pN&mD`^4Rq!XQ05G+|#ic3sA=O#gPNr1#8H z!y*e8~zhLp|h5==K;Hb;|3VS**5b#aC$6W-hbD>&wXjg z^`euEOEh98kB=tTEal$y1lus_HuGo z$%k7tP6dKqv?;cM`w=Z zxhEl8gG(KXl$hQ1fIY+=2LFN64t|*`e@=;7^uWGrgjXsiee`+y-JAe5%`)UcC~R=U zsiCh6GU+xQuX^TiQo^W!!#i4n+v{f>dU)^g%@ZAmR(3e{t~K4|^S5))R-UQ71o%Vt z?0{l*Zrf-b=iLHkZ&xI@A;z4>n|3b;^%7}B9AeMFtEd;BKk=uZp#MoRD(}VU61C_! zfEhxRqS-~ptJTBKJCFJd(iS$Ub#Ryp>O>#g@bj|Y6kcB0Tr&}G?c|ANy$XjZg}ob! zpvt~Bzm!(lJ?WXPl9(&ZK6D7my96AQb6}Fy0WajdgBxqc%{mSj-65nIe|;YjZIqj+ zT9Nd%Zk+ccVY?IN^z}uL%6PwLh_O3l3qDL#D?-eIyv+m}^>2XLrsCME^%O! zul)i!CJu`Upy0#W_2oy$-gWi0jh?v>I3Wm=pbnJhZKZ5aZ(rGP&Nkfcn-jq|N7I^IkFC|p6=ka({B@rSGyk&FE<)V{XWtA{H)GyVKSz;m`olb4%C^A?^@NKi_er zHBS}}L<3Is-R~jgMrw<0ba?cS5F4PSpHNuB5V z%L~!JlMnu+Ej^Zj94=_+GRE1L~r!Q)S7b)Qa7jCH)Z^fAu%^u_>cA$JGCD4FO*&wKrG^-*&2 ztmyd{!xNVupQNOmX$-R8ExuMQp?h!kD7TJ4r}{mE3y%d{VmB4vmpk*N&UK8q@q|}d z^0l$6{E*}@oog^feU?GC-T{5WFk6#lIbB^|5gSy0e1(H`bL(`rcxlo~GdP5`C1GA) z&efDW(Z+9G)EX@hj*B+FccM{Z3QaMq)#@&^(hHUEm5mE&%VY}_-e^;mp%|t(ayTu- zx~J^tW?0?mAO2%zNMpkhgcZ0FVO<_K(GgVMaZ%s)A&b_J)o`^(2kXkumII$&J@57Y z{J5N^d9l6i87fCX)~^GI+WqUIe@*;N>AtSS{giAU zuj}TTj$T;Kb-vt`EOXiLo!a+buZH*>c%^-qhKs}zureV0~F*OO$fUlIy*C$o=W7&jKNhsE^op1t{^MC-1PhSEAg3Q&^C z+chmFsozy?caTiamW2|I-D=)@MX!{7gdG*BdXw!((1Fu~X-4O49@G&=xb_U)ufSjF z`b*u^2(gbbP+Bc<;|3V^;7&1QEXp!6`w%dR8MaVm-=$QD6!Fo1>(WWMIdhNkc?s=9 zh9%^Ko>6S&FPnjfs{dLinM*5RF^#cn3g%OAFx}cDk#uBYI9N>~54#53P#dqn<&=F{ zTL>!qSP9gWVTT&Q8O#^$3W5(s+cLOD+pwMUOhpW=WT!2zX$h!g9|zS$?XN{}{|k)n z3@C^Dz@KtrguinZmSP>OhWa_Dute{Fi{J?sVjiT2v)=6^6hl70 zjyM`Dr7au7ZxsMlaS873Ob2;5N+y`%9EiJ$(UcoA8xDL?5|8B~nIWU*V zukW(MkaOtfn>6L!HqM+4u4-lzvrfX%+8i3JD@+F{7uc<%g;}};o72JIB+ss}xHCpf zJ0H4+8NPH*fxmPQ1HFJUAkP;~T%xUy+g{sv#VEx6xj+97b4)G1tKBUg)}<-2ps~UJ z15eo(#sG5=xCgznxEZL^%-EaDxDXW~ug2HIKo5(BuSSjw`>I^}3~wP@A{{a)HOz8S z1I3-fXP84^T-{6SMT_SUb3jkGtf%EzYJk;`WTWGG2vmkIk*=u}dFE^dx#eJEDgHL- zPO5`bmmSM%mqjXAh}$+z*DF_Ndw+= z^w}OaWF!=d12!bmAeHPvKqmj_1qD00DvP4k!6DY-1&wfN28KKAa%ko?DNi!+B4$|v0g1oI&gchc}DJ)b==1YlBbAwTAJ9^El9 zCe{{k-cOEAhgL#1v6vtpc9@)SxsE%Bh^of>R|>z{dxboIe#;hGE*S_gV7h34a!Xnu z91v2hIPb&b&&pGZDDz3Z1eP*IksQv+>x4R}qt0}&eb_w+9C?Tg+j5JOf=iWbuRlaT z1@UO`NAG_n5R}SP520f`Twta<4+N#@9-qc%y7>)4;D2xzL=!eeCZ?nF_N2N#Pof> zxDNXIiP-K=)r=rp_6P`X%zCBxSWw#ADN#_RP9Nwy4zut!oC^aRgNoGWHsHIyRT=(l zCzt3mzyluk5pL-M-GqF25P^TP-^lZUPKz}N!p~*~4)9QwEZ13UNkQuDyLA%aX2g^$ zOd+r){@od0acM_g@pQN)O!p);>Rle2w} z;f*K62-jerJ3cOjAINT=jVy#@kL0Vvz8we9oeUQFvAMDp9SLnOV@WUvH_RD+f% z=ApKh2}o@Rn&3g1o(4B*D(5k-b#+?JN@i8 z8y~nOTp#InXBITh=9UZH6pWUWaMZm_hOaQYWkA~EYNvHCfjU#%}?kE9ku4p>$~Kk;%TXSTZly}txq zrMp(2n?9o_Eb%};A6muib}{zoKu^q<3mRq8B>asuL@3i<)oEnehj^$tIG_u(KM)E1 z^q4qO9{Exngi?!%hRids^muWJb}yS{|7$5jK2)50B$3r3HJLFyfGkJqn2}SxUVrM- zAJ5CsWfG)D_^~Hhii@YE4reO{V{UZ%Y0m`@DCFd5Dq1QB2T%umw)M}Pp~8`pBo=Yg zkBn*6KPANVow~l-mp!Gc;uqZEqK5~Fms3;(chR8rFRHzp!Y0~0M#abE+qpRSi;xaC z6;8I$3FO)vGX19MM{vL_XnPrsT8USe*eed+fCL263G~N&IaU1=>H0n%`r-IU_6ScA z^aIbx?NmA#(PTt8!fm^Po)|oG^yy(Ks8`9DSUYb%m&j_O>t?I%q#N{Nlh(h*y|PB% z+8}(4#qGwir$wp`Pb-`G_z)c%Wy(4xhd>|U&G9}Bk(ps>4Y**MrAKTpuDu z{4d_4-@93cpm?8p#})kow2kLhER-h(*9L(@Qt0>AlKuSHvuQ!xRbLD)6&O6W3+^Fg z@}lEm(RZ2j_a9X#Rc4PQMnghHV@?R>Lm$B;9q0twe6#5HxIV&rpp*-sDV*B%;kMuqQ z6e@-!(5s(81jCSNP7l4AQTBcsuoCEZ`n|`w4W9%~c*#3;@tNfq8!$m&GFo5ap#q~l z3>WAQrqO%+@C%;?YM->DW+t*2;K#V4DWL5;$51PG`#`DO_27mnZ3o@b6C)N8=}K2e zIsu{O0r}Gnv#nGb6NUF4dD7*t3E-LCytM727eL#B(Ze9-m7@~o?~(Z(aEJKprX3x*rQK7tz@bbz*WPoWhAl42Bn2q$urW!70?8gA10`Aolp!XDs#@Dptu)a4H((Nc{x-hQi!K4Lrg#>8{V%72+ zX;QGHV+BQeCt^qykqi)3FhYhj$nQ#Z8}89oyk-gYGF+rlYR`Qjp7eBPgw>`V@F8 z!wsc&gTcxlJbM9TO9|rxv#Ilp_yuo`i-NaYB+zB;bX6VnpH9)&(4MijL#tR;>~(xD zrKT?OqjWYq+1!S?SK^=m=Q$w?1L-~mrQOn{LAG3Y(Qek-gQ*m6aTDzVw1{9ayk8I; zU=J`mAT3v2bYIh3C9#H|y+gm}nGWBQA;l1ArvMC>pH?==L^HCub@XRTk(LKG6r!GQ zqPE~CWk_joPkl%Mr_FhLjzzPNaI@nhqZ^h6OxZqC#9$u`-6wQPF4IJkxCy?ikluaqiMm`3Lcs$hNI@`qcphPtpaO0PaSo1y zil-zp<~)CFN0 zP+m7+nT&eE)sfROjIzSy9doT@E}Q& zBC1;H1VFt%HY_*4k}I`dJRi*+c?Su&3-r)xud0*5$^Ir%?iip$dC?lYHIXmGbQITe!|g7(g)$I@@GVEupe=-r)jeSJBuAvfRqc+v zAO>J9_YWzi__$pru3t-Djx3aOWobPK25R>Tk(6{!IVk`GfTEwIR~HmqLSGmh zFt*SxqKIt4v$>*s2^cUEezMCeT1rF$_1o-dy0G0~acgP+G2;`^a+B^JgMK-}K}%!> z*kz;@wEbVs$1ZCW`QP@~pOXMOe-Mp&w(%3H$)< z7wK3Za$XU5iz>93X1wpVfmO8DmOf-iyMv?Wpz1K^QCgh7|C=qTu5SX8e$Hj`q?(^h z1%z4sm{$q8^t0X~rrKBHUV^Yl=lX|T1e$>4s?cp$jzz9-s1)zTBpy&Mpl`dm;y{DX z-oErQwNYsy2*>tsC3h*Ed63)%(!-cd0E#QdQE~C;QTCG;0IdpmH>2(#YfN$EgQG>z zWbVaIlS6H8k`4It(@Ce^=|h-TOpIlie3wtxza3^+^5Oz-#ZR2$AL}l1)QNwRRW1;x zeO*^Uc_Ig}SQ5`uNTJAL@76OgnL`E7X^CQb6srzkfw80m>J@SGrb02x%2PA& zB~AH7LlGiBbm%mJge4mWOhPdI2?YlxdRTx+;g-7c7i~Y)RX{nGEyAxyi71n?A&on7a{pAi41>7rglFl(9C)Woa0KCHf@a@uLe@wK)t& zK{tV~8z?$2gg<~E$8GQmM!0Y|*jwdn1d3@P<}5(pIQxq4K>64jL>b_Tk@Ey|ut+zN ztK*n{?0!P$J2f~OHQ?qG;M_@2I^!07x`YnAg)Boez3E?nlT*viQlJD^KnziIV5c7e zTf>V*cc7m;!maF`v(q0!H+wCGxX;}b(s%@p3Rd7pqc$q(M7!HgD(cixBU2sDeM7~+ zS%}Ee*`q0!@$yOJLKfqp_p2bWfZqlwd^Cnel~o#j=B=yZ`%Iyg$-Qx`5pKm-f5K~PCo|E)NV3X+fMIrt)U{Qlwcl7GlW z>zK;Ns4j-Btsq>+k6EHO5C%Uyv_GlI!(onm=g1&_&?_Jg01S$ddgq)H%*K@Pha*BH zbMe5C6y@j52kWDFL}%%|1vUre&oA7zjJ0>!V1HMwZmKeT`#GpZt%u*fYeE7Y@3M=f z0Wdcu&)>GsW4$%tuB~wxqIt~v1@wq|1lCvFMTmSNovm=zg^ymSjmsPSn88g!6a%9V zx1tbcfQS?5O?tY>H<7+y3~CBz52H;-u9(Iab0}&t`LUBIGWPUp3UnH0_=-8sywgf# zs0U(AouG{#ySF>X-~Kwwk79;LGQc|1eyB);I-?Hzv!@UCdqaLu`HS9-;jm6SngM75 z6dQ0J0b*c4|9|l>Qssw`!a)tgU&j~!{mVnYUt9Pu#upK4Xa46Q`#)c#`j12QNR_`k z1Nvvk{x1mp|5{Neenss+3U~j*lOX>ScKlxmcPpu#`TIvE@;~{Vd~)=HJNCxM(|&ma zLR@Jp2SQ3B6tJRp(9#VCrR@Cn58`(#xPpudO2u`VLkQtblg9iC1KozF zfY88|Hwg8QgJ+Bx&8*0%({A)P$CM=sw)F*GGfVmE|JkOzROfq7gz*UZNQUJBU5YBu zZDKCzxi;)GlSz!!iFf@6Mf4fXN3NnqoJr6ike6=wO2o|A3!t7|kD-Tdlu^nzxfwOU zaZoC2b5c&blTdI>O31A%Y}6wKHNYRw{-X_Scd`K!^PV9?Ein?RC2e+Ygs@MqS~x+g zVawpK${|5ZOO!?8KsGVetQS2GXL075&>X=urbF56+_W?UT1`X_X2|yQS;>||GUD-` zf9tuc$N_jH!YAmat_?h$|JE#*HJ@A8%?+Zl$HpMrYsOmC2;p|TNa38;DgJasumwbp zT^tCvlvA|4rq9))@(QwnZ%4%*{vP{-juPDjZR!LGDg!GO!|9gj+*ygiz=7_Va#J4c zYn?bRqz!bgYsGdNW~-r%R6ubKp7#t#i+vOJ)D8Lk%Y!rQhzkkI!lx*rx%bNYywJxX zngB4qrUE*6lXjfTR%6A3hS0%l`FXSuj>5)@eqF!25|huT)^Uzu9L*V4hS0Nyt995K z;k&9R+2;-5r;na%k2iKp5#0M??Fg@3YRFrK$DcFHDU^ksM9H{jLL=rBoZWaBy>TSy z{-UDDosIRoOt&Es24)C1_&WrJ(&LBA+4#Vw7u$piR$@R;C$GYJ5e;`4o;4OjL&u3e zuP=BU4sw_O*7vU^UquFK%26(F?H}dZ4~%3&Z{aV&zTqrj6^3+PvYQkTIy>G=cgBf) zBh~wiNRF|(vEpM?&-*DN2lAoIZ>UUY8^9}YzhdZ;_2A8&8jFa}ABuhi@WaNw6A%*4 z+$ts_xf_jzW?d4n$MEir3BT>q2zV0GK|^WifnCkdtyeu1IN?d=0x%TQ$i>^qYpac| z!_yaUV`5G37{*fI-EHT(*Ia$rlaO?hF#9wIj{=8nB{jy&s3S_R|xLeSEm4yyvV4Y{G?t@9L=%L-Y1H={ClsWZgarOBqtw{;7-()<^23iX=ar za4F2cgqDPT6Z!tRSG^p1NytM3ZrNgzYt)L;MsyeNPazBYyrUasSTFW7e3(M&Xy0Y7 zo^um&_wSAMNuzrf@#&+^xkN4_7}-UKg;fsrt-x*^lv4|Zx$K(O{sQJY&;Tc7-Ih{F z^cMTJa^Vl3hKtjLNY-mGBwr^Y3c$6q4=jaWu{mRR_BDE1-t~z5r!;Y$O)#?nn@qwAD^1hdes*mjcKDKvcP%}QKiI>()vxAfZ*sd z*05UL(;izgi1ggah`Jki>qME(6i8G(6TzF~;4FP~fc3>$YXEEx^!Q@D^&QRGOdn^8XWUlZelXpm-Dg5IQ$x}9{*w>!ph$|}fKww0u0nR6}=EF0dZ>cDz zfIP<-=m^Lq{8MYVCSJj}AFgo;K|9C0Z#V+7D4;B$JsB7@o-Me9hh-TCqXFPQJC}F)pFI=!NjH{Vr7UO7`MmL9cb9p#z(Y3T5_F-zL z^!zkPFLpHs`uY%dY26FZ8D21LzKal8GxY4O<$O`> zcqob0e~^IdVz)b^3j@OEh@o~xhuk9rkqt#3Ue!0l% zlM%kEn8aM#+J)q~Yy}=hf4RpWL(xJ5gnS6>5~Kqfj8nsfhh2d?I~oRuj>g2?`5@~T zp0}~*6B>S9!ol+K9$h!99J@awY(BNbvCAN*6ObJTzZ@o3xIL@~A<|UD@W=Yy+!USk z-DjPad|fe6U*~dFk=zM|@B{vku-$(An-|GB3Ytp65Lgw|F^5x0kHmw9orI%?SUc^z z6bf_sF20}QQ57jX;JYTafjBCN@>EULR^7W&1HB<1a?989AV8CqNE>FYMgUs1sSyN> zPr0t^8Ga8SZ|$2OdoSS5oI>Y<-%l;YKozw^jLr-b?VcWwd%EM00M+XHV?By;ehSpa zqq#hE0__u!*JXXV13Hg5nrpWtFz{4W1a|e|mctVY;k{n@`6oP@hz|Ds+P%WqY*Tn^ z`-*lNol>DS-0=^*9)!p#2@5_O@)Q9=ZQx=%7c+rX^GU+yzd4bfA32$({{k>S`Dizu zxC)ewajfQx^Q7k+YkHjkPYSzqg$ifFNilauCb@DiTLSDa>_V?45Qc>z;<=VT&sy@) z0|Gjdf0-s7qpA?h(UW=31|548X5*s!iglOo=4tI&bZiBxhyFC$7|m$`X%?8zpi`wQ zunTh1%Um=;83>=F(T&YGcYfe{#dbZ%M}5_ZI0oP9Yv&N2v8rr9kaUZUk@(f66FCCnFug z52ZhKQ+dp{YmjhMbgNmBb=7w(D#Hn zc#!akAq$)%30PD$@2mH+phc$XOM@3vAxzP6M&X*8R_b7LY?NZ z<%xabvUuTkoQg=yZsZnULfEq4&YDez?#IijgSuAS1ee9dhq{gl&;-_n(7@`jlJ@iQ z(t3|&PID9H3}Df4gMCAvTbhXM5mZ^a#M9Io#A)vPEMKruaL;&2lfBvu5zpu#Rfh@S zE17t-7 zdw|c^nLhG?OHcj>9#4RGKRJOmb3+?Qjex{OU_N}U=vdR(I)G`5_>>%KQSpcoLhq4_ zZu4%=3J%%AUQ&afid$0Kw)uutMA1H+2oYm=#n1@gRUcRCCTQc_b}}vkBlH*c#)dts zt;Xw0#vtPme)MQwry-!4^DL_)P#uS$55USGd%kLY;+k2Jtqps0 z^f%n9Nty^pX@ax@a#0O}-e?kHaBb8h30(x(rV*; zjy1fYiXfu*;L7!yR~A_x+`B%b6djyh21;{>vMNUiOWNrG<^T|!u4MNlVNLApcJKGC zh~3Uy`Lha+(Ux#dzB-QO%lx?(-lGJ)96Y^*-Zzo)wmS3hDrWR_uH<7tavwsMUy!m> zF3>JNNy249<5`zqq_{6E4o%fmIUE}7<+mv_;Y$p5&zm1)bM;|#Ph3hz7})Kk*p2Tk zTzhx?s{tGmYY6dmF@DA&(b1X%mvQp4SC~c5#EsFdN^7}wIYI`{Qyn-t8qAKtH`o@$ z9S!YA4y*64t&6&MUE)=w)7Y~#36tbStDT7Fny(@RlX_JOsgZE9n0@qd-ijgP)bIz& zB&e&?2*@P%quvE`9=9&&=&hAZsHj2%e|lgPe_mQG;J(bnB~-|b5MYR2f{fm`!c%x{ z*vnV(9G^CKCkb_O#xY7tE-n&0arZqAJA-@bO6x7_{S-kr%lnAUW)yza@h6Q%!t-D? zP(X?}zQ-XKpE2bcKQ~T|h=b1wEKVCsil__2K^{IvZE!P$*}FG|&>%*%uvjxk37710 z&7I9i{=Ab!Z7yV#SwKb^*{wW0hks7;_YP6=Xqa0@t^2RxEXAu3n{M4Jlp-OhPP zO}-dYK$lZxtIJQe&HkQtHe#jn4F_#_zJ*j}+omU;2+>!yu+ilCK%Yi$_$@2i?B<{d{?l<^`&!5Zr2a18oazkNsrM(gE~ z>(_FrGMj6n=11%@d+>pv`+Q_7Tk4*ecFhSc70YVs(E$Wi5i5FmZ2n)T60L+k5&R+oBw8Et`aU95zJrAma8T zXr+5aYlCqIWOutpzRGg^olBZe!hVeMLOE5QZUfV|9~jXD71QeVx<++)kQ+0m9ZT7)u&w+I zP)s(mr&ap6yoC#m*sRyAE}509>>LQHe2SS*UVg(+;2JVOd=Yq|35j>CHMEY7X&e)! zsS6yeNn7}&)tOTr@nA96mJczYc_{P24N5zYQ2Z*MXRBwiqzI4BP$yNd# zW!#>aZ=S;*m>=IR+#2AAPVN@%U(v?#Y~wLa(XV6Xi!yO+DwXG)&7-&5vGpE}doJ{X z4w#m;TtcoV6+lwO2`HxD0i$1Us0ZL5({Zx1s4=rLbb|klAnStQ1Q|OlmG2zLc)2w4 z4!{S)m{qgO^=}`HkOxwz{N&BJZv|09a#9wjt*d~6deQEf4TbfnVXFfS9g9Xic2iV# z*lLWt+h;FnIp1h?(03$Rp~MC~qu!=jhV^YBnitd-Gp~$WRgX24U@cC#Pjbg$w_o#Y zi(IacJSQ*?aQ(jLwSeLh>=iu5$H}-N(l@LK;~Z*S|7b)el4m%ic@h_B6CiYEh@W+G ztzXE%-LR=IxxuRDDLxZNCuC4Bc)9+F3Ud8%wcF(Gg`G#;(Y{iR z)qc)BychQUatl#86-QTau^vb%LmPL)*y3{=ziU_H=u|CVlZRdXlq>K2P4yFH{6?~C z29e4`rh2n(FfGj_AlFO3X%&`W#facrGQ)=Y^^wUX*wypV+@6!`SK1p?@c!A`|b0z5P?syDe7L?7HBS%leW4PCy? zbRS+5tW%Hvlm8X01psypeEJZJjyr6&v35Zd7#Zm30CWm4VSV;` z!{G!FAOJcPzY8~*`g0rk8sWAQt^9T6=h>8*Ex(Mqz}{~p+^6|B{|7tr$CZb35TN_X1)g(D1;MG!7DlEe`Z#pdTc+X*D$);5`C5sR|K%T zsJ<03@JfAOoJ=GAqxh`f$_o8phCD7(DQQ`0M=x9=IioJnh^)L+j198woaVr8U!#Q7 zu5r8*qWihqKj|lcTMvlyDaI}V9dWx)rr)EyNTCXlsWnU+YOs29_sK(2b9hcJUcy|h zonT&p$pf+*S87F6cEr?6*udU$?7W6Tx)EMoQgAN zuQ!U2trR`vC8kWk7!1gJm?t$L*GFb?fvniLr_ml@)GC+qe+w(UAUtV&PO%FJg3^8(q5wp&9p{Ytzr?iRHG8Q$>HjuPw4--t|**U27} zi{Ql1B9-z0d5+S2A@zXTzZMW^3@{B5c%I(JsdfyYrPYNxX!7R>hMZwp3r*{|Lj#d%P#dmtYg99w zZfWZeo_W1Y1-j7jLq=Q^>WR1OZr%d~u~DVcX+Ub;+nafEO%)PM*!0XWYP70xaKl_! z!?6KKl&05sneOR68F-4~aeXo{3-W;-TWQBm^L?LWm1QgN(F-GKUFm=9D{hz>fX35l zSm6P;L`9Owtu@qIhWW+de8Z%L2p|%lU{Ei`GjFXGeY9m|AuKy^o&cCVhFF^kvSHIH zeJlT(r~O*D3$gV?WnZV-B248QDf_4-zu|enp1_GE*p27N%k}C+Y6x9XxYNI4bgwQj zWT|}{SP0d9a*YQZ3>vn|FX9Aj$-^VbBrGs7KkIt+bJ4yb*@3)(EuLUzV#cj+7_4Vh z?WJP+OBImo7wV7LBG(s@EVK*tf?l=QRE~F(xzsI|-V$8nzpN;z39t@X=WdUVlI?E) zB4pwK)ouh>2qcTWUcI2S6CeYf&A?h&4%Z6Ey&WLun8PW51E!2*8PKgqN{^BEgkG)f z>YXNn0|v&(!=(!Bzk32qN$B{$nUdAvid(`@zC3)2qqD2_!n|t@?JpP^BWnVtCO8!6 zkqCA!#1gkVanu+wRHvcC>@LeMY~uwI9Il|L;JuxYIEYy|xO`2#BX%gn5*G~g-^ zWdg4emMotVBo8}GKEviF+uu^gM~t>NVr!JKfOXpCByRf{H3Z`U=3zF&z?}qHdFGCvQ7@V|+quAINS- zCkM77%%aU_cqhnr&l9&btz(Ayf1$kIq+*J(evmI7@3z0-F{=vr4ThGm;aT}r;x+-7 zkE?uYQ)#DWKR~w1h%UiC!M-MU+er(~2+ldqUe61=&YTurSiR&;XW4YsgE$@5g zt5iOyLf5MRj=D|IlngCgRdrq2Ss)y=REeb|+n*xOc6%^aCD5b?+ObB@L!kdV{z>^vt*jx={vu0zAh8Q`?6Q}uu=TK|Y3i0-Qx2Zj*61*ZEbe$9A^tcynfqi-nID5UCj>V_(N?3Uqy$kz%unTTbY? zJVm>9ukB~t`g7dy%v43VMXl2Suoaph8`NLCSY_IDiov4X<|-GY?eX52Nd+~$4e*ei z2ll3MVL2I9FFsL#or3zbxRWF$V$a&-k zhCzJF8j8<*aI<3iFJ|Io^$KF+G^kBmr zB!s@H;lfW2lyT39kXv8w2N<4c98n$s1ol?~>>menC`L~?jwq)2^cbax=G{`e<6HxzTrVkBjI zo~;OD*JQXn+g~|RbJq{jmNP(KXLp0$wem~j8dIjox|v-)yM7h+kgB2PdvlaM*~uIt_rL5VrDi=`kY5EN7Je0iXofQ&HG9;<6EO@HvUGgmEBg#0#4{Q zxm^{?-so%cF1v%vtoq4jL+ji7kAYz)6X@E^Fc}A24cMY@jkC!X+dz=n!nl5I7>LGB zBYiHs4J6jWEA99JC0Iggm`FDTLeujt(z`~(dk8g;gRk;v0CO#C2dxsWow?9zk+}6M z^&Jbv3B`QSzxoKrPj2ROQmUbSexO22OD3fZP?8jdHvk&wOY)keMT(#$}_oU z9`DI?&kK<1u$JFES50T9KAA99S8qpBk+y8d_{WrBGyE>dIW^z_8Y=hViye=Y;xB8M z=UNRjW5%g0!~Cx>&NOwIDTg+qE`-y<&gUD;1P*+*3g9_+K*s}Hb^E5b%j$_1K)NVM zUV^-6$!)g|=L-NcO%7DkPN=TCyeQ*txzzj$6ZWK5ux64#mscULwrzIZ!yJlP&7{#% zfY7z-s$k>W84p=tlv7Zcn!S_rsD$kKeKBdv%1vOHu)e(Psw6-2x5|%QI^$TXmE!Pb zZI~&vr4W@Y*g=0syE7ced-@^mn)lZZ@wTCl7PU567*Nh$}IyhX7$^yS8_%%@eeQiH5yPR5s$zWJ>-fy`@V?1rne6 zDB}7i{lau$`51Y%8lPEBH;A@tEcU2+6!GhXRMV5aR7SzI*lkyz+cxc;9fg#Ffk8G7 zj!sRSY+@zPZnDCzlGOp3F2J-b5je97Jv_8x7@umT-rb2K{`4nX9t_cYe|`zRzWsK% zVD7t~P{ZEAky!Gdr(lv+2X22JkNH;?9Q}P_#)>`IJ!0dw%{6F_(ZU`XC)*mgyjpW* zBaN>ur@3N*LpLT^koCa;0}I(U_`h?4cjWl4R>STo+rK{NJUnXrucyiRKb&*^FI;j~ zL?96V@IozPjG1}U?GN7rqLZ9nCa4QvGCSQQai0QbK^i>L@#7L>q~!Swofdx;`X%UD zvJqM!*!Ny(^^L)!)vtijqb^$(2!$fKO z=Pg(C14M_I`Bl@0>f3y+X9JuqM@g3~r1LPT;Nwp5 zNxdNPVNxOQgj^8wTh?p$v{L+7uT^L6v2p~N;$y4(<^hPTN_%7Lxz#Iqbj(INc}4|a zt{dtU(5+p$zQ;P6|7>zMt~o9sI{G{~CN}OY+{h09L+?lGp9Rcmm5`vlgeB!t8}-+=zAFx&)t4by%A*U zd&{UrSvIVtVB*r{zk*l4WiM(!L583qjJ5#}Wo zVCt*kxVQI}vpnsY;7wjO(iO(JqyAP2OTK9@zWQ{D7JG~>q0Oa0#zJA|AE?js$prM| zozF`_e!jeSR7fmvZ0Zs3#fQcZlLwS~R?2$?6hC}+OA=4YhQ+`$mLC)PFHwv8b1RNH z4Se(s8+!26>1)Gie(af@^ZsqL_%owKvovw82dB-`1ihuqkblC2@_#d1eaQ*IIN97$ zSM=%0?WejUK14A(z0-itW-H4LmJQSw8~w<;R^rC_{~vqr0TksE<%_B$K>-1gAVEb$35pT~hM zz1k{E!LR%D`MOW)?(_Z5<$C1^d4yIt?=a2Yy$o@0&OzN|ND+e$O_t>_U7TeO-S==w z$Ee?1w$|c>ED)=o*KeObPLVI6nXybbGZ^yY+3hNXivTw)^mCB(wP?FpV$Chfw`?l^ z(7nIWu@fZcpOY_D^|;1Om!jvvLa8YFoU}!>R}L}dmSsmYHyel6GG2>4|2a?L{qHdo zIWsv2u$>XHDn|s|a8dT=e2UayS{tWd8EsrdF3;i1z8t&Q-Iist&TETz9?>4ie%O*lZ;8j?x~C$(c+Z$BPpT>^+XL*& zE4J<%HVsmiO$|FkYPXb4FYkU6crz>+)0VY~&m3fyPkB0^f1{I%N+Wqih zX+^!4JS@T-1Phg(oIZ6q@ETgqGIh3J`wANJkjHH>R=A&Or=_q}(aJ3Z@dwf&5Y9IdE-u(3Jm)b-uOs1E;@OFgzkc=9Lw_A# zqwbJW{Zhytf0Ko_BvPH55s0o}|4tj{PwT3!Yh;>W#qH{rX7{{yQe+Du8e5YbKMMO% z6|1o26q(bYb-a|Ajc0`9m8kAJ%I`3}eEOC&_F-7ThzD1mB#%+}Px2_mbXj&KK!Il6 zc*}hemL2^{vz6Uk`t6vt2)!bbX(1&u*X6SKLR5=b~|F zw=N3e|GMn!Ds24zs5i;GP$tD7uV3#q7n5z35nq4Jt=DfqktcSF&qakkm3ucx?i%BK z(%X!MOvQ!L?%8Ttkrmg6qzYk366knA2G2#CE{(saPo3%170>TP$Z>D=Sq zxP96^*bdy$aH|3<>rrP}9sF!Ot|$kHtw0K2oY*ZdJ|d-g(#@xJ!sgO9lzmd9zPyiP zKY#d+?W6K)>Ed81KS}^68=we#4H1bfD`3&3+3rqd81Yu*vu*OCc;3dTOP%QvS{APt z#f=@$WyW7RO&K_Ezu$1u8@mg4l!#wg$~Pj+rB0UqyotT8rWIWn5=7-8T6|6hpMELY zj&EpD*`yLdSbkZpDm~QNHclPYc4?nw=eF-TxfJ7A39gc2ZJKV+t;K*V(PD%i;y|j=GRsM>X9OM8_e>J-r05|v-Xj#I+Ks6Kaaz; z?qB>}i^(C4wUv#%lTxL*U{qEhX6q=Le-Q|0>7zG;19gs5br~;rbGeqxzdM9zU12&K ze6Qzy%(xgby3;a>qf4w*+xx25>eGxGgoGS(qosAB&T1S`^d8hzo+mW?qIXmJ z7oIN9aO*_xh~_-bjy>QzsFB-V=$hR6;eDGjMiXa6Ku>YEMQaEPbtjl6(Vr<~A-Mco z$J^#C|MoIW{@HRjW857`&Y%MRMSw1%l(ed_#+cbTN}1(7m~IM80HgG{>5xe zKBZlccg+oZCRliXLtv4@SF}1?7Dl*TS!aXT=*%D`_e>;x`N8lg=~KTNC*&z78_us%&I0u#wMks@5rvKRZ8Lc~4v0F>kD6)i5~DJK!rntLJnY9R|B&dIVH?bf&% zY`cB_ozR1N1%bY;Ty?+o^k!j*H~)MmHdtEYdoHj4tsBbt93|dTnu8XeUJ=!dIko!A zE!b1d$!8{;lV2CS?L@$GMDef`z0Eh$&ZveDTD*hB%do@H40!|wR^^J@hI{<00&^;i z!+Oj?dYRlZwU=U|aRiJNLIhOK4XKlrFu7@|(eZitEri|BM<{&EutDis(umbrtcJPC zZk_Zs&4WS4Sl9EiI{v|OjpokJhe|{BxpnQkEa-Vgtc{1ie2;DfH^P(nSJ812^PwA3 z*)#pdYRSc)BSMREmQ$q9b!=T5a}{+Bf7_~cC&lU)AJD8Tj50ueS$mjdBOnLx@1eKv zRD9gMRJHRlEnlKOL5z8e2Na3lit^w_6eh?N}qa5Qd<>;M_YQ+cfWhxgO7Q~D7+ucx*&5mc3cFSj(5*a)gHZv zTunCq#O-^MuP*0q2o!1Y#RVzj|GoNBAE`h#YojxsM1rg4LvlIl6kTgQCgbuAAxoMU zm%gGo12f81(x^Wx2z2eYruLh9Vo-&)#{9KMu!=hOo@c)vQuMTRchm-S-) z^Y&dU5PKcu_k<_FGVO>!Q1S;%T9|GM-%DCvoT+u?*Sv!|nxN`PM@!JfI;C#*Pq4;* zsuCVGcp#K`(EZH0qv^b0@p>EE)UL$Okb_GjrsAw_LoortZ*#`^5|vluI*X;x1T2k3uA47@=Hww= zRnYrYQEO?IkTNLIWBRr9)_Jw5!CR_u#p+~a#p;+Z#6t5RLMz@?e8qBoyM?Dvc8`v+ z%KZqf1RK)!TBYLoO`EatFk(L;gi+GJws;l{GF|S?`T*3B2{;q4q_x_^Da+TveRM}= zGET()XGWvyIITuUoAg8UwLzLaalx1-neZ%r5_b3@CW<6}v^+|&Y0#YU+wCC7tSY>*2EalA?Jku)oHVS+g#=`=^QlcRBw;~p!+pEsleFSr zc3zfJdAk!HY`pv!l0|5=(iWK9#u(Dtonc|8c;nGXW z3d-Gst8q31g$d@4g|c;sERirUUgZw%Q)>%q-!f#2x;>s`y=i{ILV1EA()Ee*LShmZ z7;$j{j3_rW=y9NzVk{U#v=+}0tvDy!Qf$Nu-}r_l&?Zo=-c2_zzo)BM&wzJZVDny;TEC z2AbWUhC!f-yVlmVQ-*bZ)|OVPpljqZ92VMk+vPAPP`x|u@p%v^%GBubpo~suw0|Dz zVAk=fvr#WEo4k#Dg0xaJtFq8%hFtHyQ=0vc9BjrM)80@P)E=SPTl}Wu?T*O0c{fYmtlM#CA-nJT?wqcU#By9;$?GJ!YcZOjh{!qM4x&ai zEe(_S8*!xfq|R4OeshR7SoXi833~{;-5h_T<08+epK~yFw%%&ovMWdTjE6KO?^o$LC*ciiv?A9k7*W4ju_qU?!%WY7S)@_<&rSBPfrHf~ma~As+G6Ul_ z_{m|_l_x5^+$IIRwwJWVD$mJIBw5>iAidvc%fy`3QUo4RUP*Z>j{fPRq<=_grps`T z;7brG2?0CBWKnYUb$5=C&DTPmuD=kh{H5%y$Q0l}J?&1dCF$iC6u)aBSL&S!Fu3Mp z4XDRC8G2y3jwNm=mn%EQFx-q==v_)MAAK-O``oZ7Df#8a45P`-z;8w)zgnk`_oADf zIeD`OGIFXR^9+DWbP|fCDB4_OxX?Bm*%=4R zN!B_zeCl?i#9Sb{lRMV>mdY~VzM^(|7H8C$E!(3<*+f6~!I4-9DLRpx8zx!QbTDyB z+5gwgEx8+EnYlhzo7=kvk~QuQhI6WurC9`SN19!UH=C9nxn_wQ#kr%TXy}}1S=BCS zqH(2nvJ{%8cA&)xHMnRiYJG zVProy*07-42>G$ItOwP~3Ayu6_xZBE>*Ve+|JuF%pYF`EVY93;3?f3Z*L%wBDtk}@ z89vlPb&dNHm0jH9Wjn45;qB4t*cka^%4OI9?X>vsEfAfTE8}@rlimw{QFI?cNvyc{4E3OL$c#MkjFp*)ZT28bgxFsqJZo}h zeBKpXaD?gx7d_c%uMl5;+&-{3N`kCu#yA>!*5;J*v7E7{q3Gc(O9L`!MwUUkJ(zv_ z*id%}7@MWoOSHlVfmH5wLHa!mywc>123c*{IfBI+lhS)Z!iH=&5##sOs$Q+me`7I= zFyWuuNYIN3mLsMPrc`d3G+e?YofSda;*zZW-`=#AZt^^Md25Lj{Z)8$ssA9V%zEk5 zx8EJsT?ZRF*CAhF!!B+*)3Z*0$TRO4Q<>3|wWYF=E+?X>R_s;f6nBwFq-VEo`^&y! z;_;^@flMBLp}Ir0ELiy})mazY);yg5uxL5T~?PQv7FR zER+R^)q#WP?ef3tK=w^^dxrqvljJR0Delz|>NY+oqS5y9bl84~@kA=2zC~jf5BO=l znbBY4V%eI>tV}x>3X|+~FCeX?*Jq;xcbdUQg_(8om*#R=P0sW2$?@iesp;pg z(|(H0LYK7^TMhU>j{YXqexcLyogBY@H^fDeQNysvQxBD?gtF5__kLB8)`^(RFvE(f z&E20Zt>UV7ujQVUQlBcVv*c4N@@zUI@hdVdL2w(X6Rmfpdg1Z)-mhK!G4wbP6_fg> zx{?R29~vOP>+bw&vRNCeg-inm^B~XR*GYE9(RXECA?$3pUz@6Rb=wXNuqvm=lT!i6 z2C#8a{qjp53p1DkOB)DwOF$qDTFZ7DC3(J7U^mVhBfqD595~cW(vs{nn&#(oyAKoI z@+Eez)#incPYq^y>{Z+{TJsb*u5xXFGML53vT~CaBd6=n*h6y!fp612zKn&r=UyBy!7(*%=6dhVl@8eq}QrIViIf#ywW*w2Fg9#eg)iNDx@ON;yB z_B2@psT_8p+tsAv(F=%Yts)X(EsAW|a3^yAKAE`K-;;3BEFM-VDN8HotU|<=FSLFr zb1-B#th1PM22y^k0UYX&y~)qkXB5@$iqsoDGHlQGSiI-OS?8%gi(yVMbF5(rc=TbI zH1_GzRAC~1a`U4iQYDCKHu}$t$E~OzM&1jKhJy-HK@vU7(WYlDdWJA4GxBu(`DePC zm-!hbMe2D*K88G8X`?C2U7vnuDtxzoRw3sB(vgB38!Oea1m645g>uHNY7K?}-}vXS zhqdv-A%?u33V#)9z-%}8NpX_4*Ce;`Q0phxa>$IW-eUh6<<#ZcH?qifjg<3&MzxFm zn+dl4fp$W5(`S!e=g_7%{`8Tj%IqJRaPq0e8uVP3t;!AbGM)amv=ZIe!V+ltjx_n` zGk1KCibwwDL3BV?3d#M2EK;(0IH93M5$UJ}Se#38RyO?_cXvuFUB-9D0yek{eMcJU zY9V#@xx$8Sna18tis6wzXZj87TjapL#Z|4|ZEjh@-(z9j5eV;}e@sc>XtLK1D^H!` zK?o_<1dt8=pMU;m3jTj81&+^<0ky8X2T^8$tlpD6gB|;3It&V3e`-KMvf}3Hnt)rS=2IiptU43f}XFVZ8oZ<7{UB+iS?LfA(2`*$JBZwbZfR{Ch90 zxM_biAx2&{aQ?@pr82|X*K+#~=s(-?+&Zz@%F(as)y`c*teDZ~V@gPw2N{qwNvv_B z#Zr9e_O#zoC5QWhBw6SlWk4(i8uqt-6pGbFlDK5IrfCE;GwYpi2rqpFABiOG*pE6* zp8JP$UNYx_^?>uJi=)Nn5C3e2t$&ORSo&ByEFkZ--ignKJO#x&1Acv?wOs0dPD3_I z*O3`M^WzK3G2EFo!;OA~iQS9U4qt11zv5fJ_m7`pQ=BPHo5PG2nX&yd1|x_Ye>6{W zX)he?+8eAvrAJV&+4>_PVT`0Njc&h_qCg>5qiIx)SitJyLZ<)xjXF1o%kSFR!?d@2 za=qrO{S=Jyhn<#MS4ryYsS>`V;7{|>a%bh-caCQBOLD_L<`~yCd~{o@YieUz{UtC} z7^##F3cR^#m`%sg%Z+ej7xSZ=19xKO=p>LAZlyqcp`$x(C;=YdA2T$(?9(KvKUcsJ zom*QyUvkJoFofM`tm22y#$XHp^(X|>k%_3^ZY=2{5 z-7S}e&`lOIAM5U&ci;@Q^|OTBdK>@I7>z(FV9TwR7nvSNKFJ*KM)j1E(jop^A(k!= z1M_X8*eC_vISN&Vw!E%B55dFAtmOdtr zqQyCe)UCPVVYDpQlsCkLp*x%3iQ(19kZ<>A`aQ6+%KN7xudG4zG!v(ox@hjAYWzBr?qG#z@q=Ra5wdO@@Z)c>6{@HmD zy0_9eJPd<);tpQ{9;HZBjZktZBw1T7W3u68Sd|r8^`@Nyn#a>xmKC{-)Ls;hj(agy-MR-J`B%x z0AXByF+|S(W8`riZc(FnJq41jSwA^gwi>GZDv4^qI&mS4w{nM)JQ)UL*Z{CW3dQp?5RpPGl$S+euT=ttP z5WiPL!uHnv4OXIYh7$D@zLTimyk3hl%DgdbJ!QFCY0^Rgx*wdx(=c-MW^M=lQt+8$OG=3PT$ z_@vOdO50>2H>MlqF3_;%7^>_-du3hu8b)K{o=6`_-G6sZmBszxPvtBh9M@#6?nogXwQ+Td zE=K+_p!V}c#T?6DYO?0e{0Hm`aeq1cSfk?+D`Refip}$b->MS!4|ntskbmgZ47r7v z@m`CP_JkC~C=Mq5Turt$>S!GameomVK74$Q?GYO#9W@8Y2iR9dOQh%nAmL}bgk+tB zEX@>H$DASYSkA5+96>r#@1FTo0J%k6jPB%PRGh;Nca-GjY`o!s$a~Nzs_{O{5?Qa( zR}*54S8l(MEpWC72#_yXfUaw@8=M9kVcv|>BC^!+J(JlQ}4!1k&k*< zaLEE4qoSe}I|z>F-pM#4BX2-j+(-V`$VcT@2BMuc>frdPkOOesHi=)#irKos#~4yp6=$2|V$hMZc( zgt?s9h4b+X4G#x8EMjtFJTs}y5`ZNuoL2b`H!@sIS6+r&a6=FeYYir%#jPC-@05*j z;~+Vi7k9;%qj8Hy$bhdqS1TSPcQ9F-uatS!RE(3_%UhSrpgdQ#N|bk90y+K2S4B1( zk3P}P+bzFeg=tS;ey*HaCLbGK4cS!7s;uWz6l#)TuXb-VN~(JEP22lPvWElkp@L&M z2Q>=x^5lCJF|VBOlx~_R*&+(H%t!aYjhwi3qh9nyAHQc$9zmay!~+`#Ch?!+kzTnX zIh$DHW|wkxoZN5n-J(FS9GdYk=$`0lIx2bcp861m4U$a0iI&2rv*;u| zzA0->MK=kFd@$vL@L@Ncxm*{Gm8`Lhsc^UZ z1l}`ZYt;|=bK0LKcZciDUV;1u%_*u7mC6E%&+~`UtO6-+>gfI;e^9F%_r5S>Y%|Y+ zPmRY$e<6A~N9_QG?7Aqc&Ep#?;Ae2fL?lOq&+Ed?CDSU`-Bg&j=NhrrW4}{-nC3YA zp6&Z{T+9(~&XC>3LfgA?DRVmtC-w9kWrmf8iAJF$lmy1$=E|cl_ko=VQ=8krB;L@# zGJ=l`SU}Bd3O;&rNv`uk_Dsc<7xdTnu6dk;z&_h*zD|bt+zyY^M?pL*{YIZ|R_X?FEgSUA z&V6Cl^&q6y!v~o$vVsG|HDr=o=o zb>}WJ&nBqN<C;Hh5tmZcc>@O{pc z(+m+xxkk|uV(T+6v-)Nf!x-wMnPrUc+Ak}4%=ZoQ+ebDPa^0f7U54<;cb2nrVtl-D zb!%~KqQ)?X2CV4sy>*56)b}q-U1g3#NMGr{$5}exa(wh#kL$Mb1KaIK+^`6l3y`gL z_>4t~1yV1ge*K0CSV;%q1soD-w%%`J*Mj8OO}?mSPWkSw(jVWubh}d;93Jz`-ydvm z7_aZRVoP(!w&z;PaQTI&G|RB@(rgE{3l{m{=mKm5xg*e%H%vCi&>wV#IzxWkH%}TW zKN+I7s_lO@VC2$u$}mo@OXP4UQ-zPH@~uG1f}x#2T_{t~r2;PYG=-m*9hj0vmZFQ7 zax6D$WZ8|!s-E}|i&n;8td2K49JW<mk#^tjrAMth zEE-l{(5Jb0fjSApVrg4(YmrdTXO?7l%%2$cz&K#f8`ERzeQ6;0;hpN-(jU{qZsnAuc**=|*y{0Q$}s=YFX*P+RmI z&AW0RLN_b3%xkurDPbeGJsd2u0A<*h!YSbN!=nU<)}5AJA*B+w8NImbq?@|FR_+lB z>kZ{De9WgAs3Ovz|3mO}nugRG@~Shjt3<~wNyJ|bq!viC!;)m42wa#O^ZcHq9|s9_ z`tXG{hFU8fnDNiam$gQPdvS2BpF`F*G0Vf{rl(XyBhvf+A$P*1yh-`fZ9r))dcHTn zAIdgzUyA_(O@Up2EX`>;K=kWaLIgBLaI%tBHtyz*eHl48<+ZqtAcZTjoFjb9_-yKR z@`ZS<>Dwi3dr;riGLFKnVyX9Cls7@5l{zVjI}`S7b>v5M&vv*Lpb{@z_T1c2)jH#D zApT{~oJi#S@1p4OzQjdrmT&ev8ZwT=O)_z%=!|PDgh?OIHH+@zmy5oo9y0 z`WdmZEaE=bnq{mx%kouu_xWfkLoQ&H=9vmFKwxsS591{_@(j~ChVwOoz#FkxfMg_* z*RGq-hXp59g$8Dal9de?IPwQ6eDl=l$vp6#>WiX_Q2Ka_;-8;Nw*Zf zEV2H&{_9I!F+X+R+PiiL#Y}Id$Xdb~vu)$uZOB;(ylpY3#UX-MnQ6DliAu{H81eFl z7bzJ)!DowT_aCaKxl_ch6>Psnvvh0jl6H)fdGC0CuabC_W1DTQl|c3_5%&e-M8n9b zKipdvv!i}!2=)uv^zRo$JHpWYiWKMP&{NO&2ezqv-!mTKcbJ3f$d1F*VEWSEbgDPQ z?e7#Xstba8!F2PoUmv4BD_Z}V#@TC&o<~V0~b|RweLR3S+%AV`! zb@Axs(zShYajtuk)~vd;+pN5W@UABVBNslWfr1!?l zXnL%Cb?~P$-FJUS5%e;m`*olCmA{?Jxc9w&USsO$-TYh{#5(dU0a8`y zyK@huq-hit{B6A1O-WAU^ZaHxm8Jv;e=a@hRun+NK1?l{WsW7UGkFg!mf}NKnZQP8 zpCSl;?mV;UlXgk5=zo2eoKKu~eEbXJ+7=9VIz};9-B;6?jvN>6-spc%QrQw$W-RNt zmi$udZ+M}8?pQdT)qx-v*yQpt>iYO;nL?Jc@a9^W9TC*}LC~ znB>!8A#;YHuZWlqm$J~zS`v4HNz^8oGD*e@D8*RCXxywM3+La~=?f|#57nNgh2s)Cp0)vhYktVrg?Cs9r))b1;3(-RLZKh;+6|O+!2fijbFdfF!oR?NsSqdH6v#aHVn1_kC=zl&L$YWL@Y7|3KPNsFL-8$E;Yk zs$Eyn+X&Z-&UDLu;~dE6atWlgB5mIX>A!}AEqlPlbsdFO^*)O24=pG@X9E<JQAUvR4ulcq%iSkECTC>4wpgNTcQ1m`7(4gfw{X zUQZ0KU{MIn)TKi9rtZwxe)xX&6ZdHThx>&}xv2eLY}gy>81rw@jK#tK{(nHq@x9EC zKLl$MmWO#!@?V(--V3Y-z8*o1q{@8a$cBV2o5U6 zh?U&8q8#+JU+fp507qKxov62(yeDgEWkl41GFuOQ6^Kk16&# zRDT$gzMX#lUw?}r{eSf>!vE8?p>K;x-4wg~zpD)`aYs~)i~;|Dt_>|FF8Uv9j{3)I zIGwtD?$vtQ2JgI`+@;o2XF4i*B{ejjdnWLxGk&>%i>T{%v=0n0pEX(wioJKOce_c9 z!Z%(Nab7giD($o=q=;b+FkhpCWvO@39Eo}Xt9+x zU)6R!m7m$eh)Ox#v#xA(kDlxhs6u~T`h!@>!JQHtFB?N`5(ZRU9sVqUX{#0yS~ zje0a57cdTftoc*T9Me*9TowBVo7z)-Ox0$RA^cxT%N?*V|D7*aZvQJnpSZZ_|80c6 zJLF2%I=BA!2z`>`cP0O$SgcLGF1y;H{bJ_fX-jj8q`s%{Z%1bFPtrF^29wcPHKa$s z-&Ynpr0<$#Y^iA0AD8a@r&4%;14Fci|1R~J?4z$w%pRb6p}h- zm0t)=ox6pvQyKoltgb~^7GQfXVqOkfa+3h+UOw}sAN{Vl=zG^f3hRoV1X73&cpP!| z5|>Y3J+~Af4bufce@xWjRal5I-n(Ar%s{22K89E81%-WiCHPIE8fx%^jDcqoS5gZg zSwcGsuQffvL?=E@e6et`3%Y`4<@ktE+&u4QPe7sbY?qu)`e+D`V)fNPh=X7?!{(hw z><-g6)ZRGaG^wP-yyx7>n-a`GW43pUUwl2@TYed3)iVyq{I(}NEg&$;Z_L*LSiW)q z%NG@GwEF=qp%cP5t#v}-$o=WZ;JM}gB>3~mau}5^|DzUWzN1L1m27=`k9#D~R!4me z!ldXCcS~IDWsJ?rD>?Fi6VGE2xb8x_B0V(aBo<;y2*sr1RLUt=jDHgdDmZi@K-+7k z*q>T2Qi17K-F!|Av$7Y3P1WmP)wiIWEG#w)b%Nk;YfckRy$gI6B)Gn|f5d4S^@5?ywiTR`qM1cCsfL z+pI*w_1AG%3K4?;bkzXwjq%CkhcRu!H462uO6l?h_rD$SwZz4FC6?>U@uZIl-Uvnztc`*1KqhkXdu#`*v|@cf_C8yyPKJDAT{q8!Gfiy4bR z8#xtUBSGi%x>!Wj>}#)#FMlb2^th?5@k>N%apM`gPIR48<+JvmdOji!UBuDO7gGM z{xlB#`kw*xVU_4UPQx;JX_#$bfqx0LJ)zo^%KpQX7A3p`O2Xc+i_-~eURB($**u2_ zs7bS0s|pnFp1#Ey_Az4_s=*|=!Z$>np=fAe{0rrj3|uE3{>$S&UXY!PC*U@UamBd< zNW3^)xtu*QUgFrb9zMl_B^oWA7k#K(6%2?NCQ%9n@JPWhgaP^3A$a+LCKVM1;aHM- zv*i1VzA`R2X091vIs%NdKEYdtcza>IPcwY!{JD{25xmiyG(Iw&CdvK-D5XaP{9=3r zufzBr1$%s=g8DT^jv{uIPpae;8-nC6Ea=HB{7sCOm_U1>2|hL$nlk+zD|S7tl97lp43>Be2bg*#@nGoT(@-75V8VfB zJ^Z9?(P?64fAcAW5*wy}o&;0*apE5%o|i~|^%H`%&=aZcw~wlWSp{G%`Apbc$}{`o z!HFZ!@tlX&FkAdGhOiuS27vAXEVmWLwPt3u5(e4}8>N&&Y=HSB_#AVgz9_8NY-)%T z+ebw_PIH>A9J=vd(H_jXVBnwUvan(s391#WA*Os-tK40h4F~3cK}S!KLG8;K0{y(cOC-Uca${T9Yr?Sxp+>5#;NwQ)xisuny#5iL30`LV z2Rv~Uqk@A5o_g^%HB}#0Mrohas-PkbBOoUjZzxcSDrc2tKaY(t z0$QFg=M}^%&FFwm)H^wqTE;5P&Lzz%+t8l6Z&MGCqQo?qa`R9>0%(*hCvrzdupja8 zpJaVzJPU*nO%&XR9n)-h*Olu(hgty(!N3xte-!=t8=DDNlcToWUnaTK_B$wU7kHMq{GZJ)dgt3Q6WHZ=kG-Pz@Q1R3u+UKvNqnj? zVEzU?NGKJcq;-NxWda}}e))~NvLz*^Q6q@m4l1vgH~J7y%czS>uQ*kmfg(%j*kAH_8%aV7g>#l(HY&Y-ouOr}@55?$wo!BG6e5?T8u6bE_z8gFK5P#5Q80-;3gzq*E^E9^z`r$v#c*Fe~b@<`Me8zM9D;qRr{Y_g} z0-_{V`aJQe%-BvJ{hCJL7yrc)$kcZs8rzw%VgMFW_mpff9M`Y?R6?H{kMMse8W7~+ z$unkvA!IUsbIB9ONWj9rBDEXamygR{mphPKw!Wzf%c1bTE3gw6gLl>A z;H=ZnoQ_go_l-{TG!4tI$U0k~k7>w;kUoPh>8ryZ1d-Lu^D;~~Sfa)>(f-3@fc{p+ zkOmU$X`$)BM*7{sGXu2CN>g~^07V*@#Mx7_56sHZ`N25ydIiD%PT?gO#!XKEhEd>e z;X4hmdk9k(u+hb}DIP)m`uCoc81jw6xXGiKQ35!;k_`2d6Q-0aUDP40zvjQVmZSzC zyjZX#Biyn2i5ST-?0(vst(oT_6ZY%NK>j4a#D*m0$~#JcidT|x!;&l^I#j(neb8M_ zwUT*e;TMX*yW+uA&MGAt^Fwft!#h}8>XpEt-XSW?hEOS`S_$Qu=@d9^68z+i(@Ai8 zYN6wvl7s1IY{K7q2>8f`@##&_%3hJ&EaTsr$%(+`j0%}cM&oduWMg(8JeGg=Z;xp& z#0LM*FaI+K|04%v{rvwx4n%07m4?(h)IGTl@j1KWISz2rt729yw{10CVx;JopPuHt6KOLIx!- z7%N0!W;t7|SOXk*bYhQk`^>nRCw-`X?MsK9ZcTt;}V%%2B>ovAh(-O>GjeJ7rc@P*Ff%>H9dpQJjCyh(mpah zf7oRB8_udprJVY~WTOj8Y@tR}qnPEG zvt~OWsE?vq*=T%yLk+46p6=_UF#A^`o)*(NnVcpjo8Se74f*=eMn|frUcK=<45TSh&2Ff+fPv+IO_ZpvIbzE=d0jU zAk0w%fJS9h;XrD2!W^NMCI?i!7#R+Rg)VbkcUaIUiiQrr z>#;qx>@zBp>|5@?(2|TmGuQ)fEmGTJgnBP&K#5t(FAXNc=o(hNJtO5NDZV$$uY+lV zCjtnbyEK?XmNvdVM0e6leAw%=VXo){g#Ny_IbJaBB6cZ1IL_u_8LKc`%PnP;U@qDS zvjikXf*spxk8MIy^*EVPrg~LiYhk9 z4JHI$rip;kRC*J)zE&miUw5k5s75 z(LQRc5bn`MC%NK4pi2T!XJk%@g{_~!+JT+86yss(Cd7%#zTE1QQyB=8!}`!R7_Pq@ z%{W)3e?ULMv|=#PUxdipfiN}buRB0c=NwRpm>i3i{6fu`qZVm({Yq$BYfI;s)!<#Q z--}Qq0<7XP4;X-78lj*5vVTr0T_o)ni>iJJGz4ggewsc#aYlnUj)&L&C1vmU=|#03 zisyHbTMAkQCm9xm|AHZoicn(CVTmDlmGUd&GOrCp%}@B+@>whRbr&LV`c{nxKj8lL z@GiQh@1}Od8MJ;MG|S`x^(vJ>`%HzjI$_2_AE&>o@3}(gftScIP!HTJzk(rNGY<8t z1W-=0>U*sVqWWR4^*5Fg-D`>Phrz50?33$;xN#X_gIu%w7=^nnu{YelIdnSMXxpRr zDiLyL569sC5GSI%@vIuO){wyR(Z7mruI`Fe%WvBL*rN?F=1?whw$(6f?Az%c1v!ZgZ#NSk( zmmNk{!-i}S+&7^il?OkNB9aHe1b0!dG3)~X%_i6e1`GdoRytiFR1@_9pr6f#0h5}9 zBieA245!8g+b}oGPuSA2%sXGH%tKgJBkJnF@rW-m4=j?$Ta3dl%_-P>UkfD}eHC!1 zb#n?wiQ&X{X0Q$r&1?I=OYmE@2w?h?S|cjn8Q}^AM;@2ZK_xJ$xCadYR&dcx5&+BT zUDm%littb;onr(>s;-=1bn_uaY6U}rO8$WkL0bsF%mDQpm=Fgt-Rg?^gsHbUK{XfT zCY7_7;~=&onILK^gqLyO>rm(g-DS!=phbuVusuEhf{J>feOyW={pqIOE&(lyF|hq1 zAKLt~$ws3KNJTj_^+w}zuk=MIUm<64B3yzBV@a5>#XKp3H`kG)f5oDU40Bl(ycWOj zkJiCxp>1y+64O|Fp;t|-E6;lQY7EaiSn2DsViWZqzWt+Fm*$ZI@Bk~@F|AUmc33TXcv(HVwygWE?!du z9Q!S;Rg5)h5u*|qd#g!H48MT~ra0;3&x;&S@EirY2KEPL!QYxEyqZs3K%{zT z=(_KA4&auGjcQ-q^?aI7Xl?tx1LRt)bs0Avo8KIp>57tKK%tP-u^5Uio8VW$*tbv0ZmV%eEK zJp8)0vcS~ufc~F`_G^uZOmyC}y+U1r$iOyj!PK9xbidODk7pIwUzz`>Kh);O3D1xd z8kg>_$=`kDo-$dH)^apN+BWBrTD!(FOmc(&yB|VKdjoIJ-GR}^X?{_ZQMaMy<h;5R*9p4P zsNdO31dU>M9!s=3uRG`N4t>ExcapvXr@|NB6v1JdJehkG;hK?ojMrnt^z#_iZ@j-S zSeu;I?xSnqaL_tOn`d&+S}?k$Yv3z5IIJZTWp^+;8>3#kqpZ*OKIlQmqbkBg&lm5X{V#O;%slds@D8O4@%UgMxJ z!vd|v$4B#HPC!IFg?pf}vqmKBJ zt?#SCJ5g`AVpj@tbR#loM5GJJq{cI>(dvNINLU7Om`RG>Q7Ou;bYR;ge&L;90*^Zcsjj?_G?jcka=X)4qu{zUsoMYm@)r2k;eOU(^iP2qY%kug@8I$eHn`;u=lIxL~CaCS>j z*LsIQhfxJ&l*&k7u3(h}>b( zOCiyTTzXvRxx)AmXQPb0`E0K1S_5n|9ZE|1Xqpc+i5+xWMo2_x{uP;<9eG^0q)WeF z=R#VVO#5y3ncr@GhxkrL^?DS+^KG*`;R4SH%G3wS>OSPCe_i?(`$ZQ%#Pa8FAyMHR zU3x4E=9YSZs*%sjfiv`>`AxQS!%KnHTk&F7M=sVdNqE?8;HM)wKK)z6JQ}Z8UNg@E z29^V>BX#@Fal3pjc;b9Qc_f^JHAG9oXJ@h6vR#zWM#eUae;Iq?6z{kDOZR8vvust; zy;8rHALQyTLQP$D?zVCQ9vWH1k_xW{d~7c`Z3jbloY5+^l}OVx>1mvo&0y#>b^VOC zXylN$$SqJE1Pl+qxn*-o_om0fvoMD@%=f=tz`VMbMlw+UESNXrTVXByYLU^ zX{7b*v83aCBVVLzwNS`;cxFU-9+(cMspl8XpG8W2q(;1al~FhQ%+*-MmMuu_?E((nAxFW(Qoz1w^>c9Ul}!TeZd6+ zV(8A?8|4<`q*-7g3QBUxuFzJ?WXcr6X& z$!}JFK*-f=kb%16(&r#F0J}VrR97-Skg<9B3G<~AhHNhgy^=#}0C2p1+=28`T|fR} zLtDk0Kj$$&1hxJ#lpf|v3J8c>+Eb~`gns;5daLb1Z&Gop)7z@+nOF5@tGE-hrMYEa znwBHwsJu`@o8#>zFH!zr_aAW-Ci5NfqPkRr4S<%fMu(aR5R_+Hls^0FAc{2Z%3HQ= zKV!}Bjn8~L5dFRGKOK2MT3`wGE=BT<-g&L|RCW()9XFd-SJE~&H@(zHMHk{(IR_(u{iD)pj)v3Ds#0X-+#&vWw(4^#mxry&XJ$~{k2r5Qg^3f*;#}R{ zqM(peTXY45?Y5)j!-?)hO#tOA{+fZjV$2^Cp^#tZT79NIoKY#s;s$2PQ8Ft9nT=oQ zvfo}Bhcv&v421;>sy3tx-Six!X7mIv37Xrw8HHZQUt^*Ril`A>)F=L>983?ED(>^AUX|h%?ypr9xcLYZvT1f*= zjkOst`P@i`0vu7=OS`GhE>mgtX{*r|B+K!3h`0FHBs+9xA?*oxP<6=)u6jL+!l&2B+jdg@m)M4# z!fSbu02o)Z%>V4zbu6B6THMsdLqff6;?{Uz?yG&0EyP57;>R4@P}?N6lUH%WRXyt^ zmNhRtFNXX8A6mOBIdC;(VxHuT4M z0ILV-MGjcc;zR*U3O{x4`1f`M;6Y+;vjtsB)AWq@Z`^#xkVPW^erbFcR>J;=oQt8yD7A3_FZ>L<;7)(tDmcy-R=avGLhKmK#W`gA39;0FeG5X zF3qeLLv7wQFA6{Ntr_v6$hxLkY}2!z#>`Q8>-kjMSwHDYhVsk&c3QFvFuAejH|<;` zP*|lgmE^^j1PPmSr4b&`$?w{^DpT)}XIIMf0rsLL{=li`GvB(AzRq<-gLJ=`OayBe z-TL$I!^t(1$^2{21PX0@dQP2IG;?i?dn8sn@~aF#BB}w#|MkMxf4{K&B`mq7Gnt=H zMt(i2wH&GYJzD3kH`z5%IBt27y~x}jN4HHa0mLPOc-mvEDSaoG~3cftp%>B)x@QEtyk1db8sOCO&PslqGdf1Za)Wv zizd|fugbcr9(gi)k8-vnrn#ot_x6*r=0T8QKPe?bs>%ooIrb9-yAQu%c?0k+1$or8 zLd-f&fzz3R?Gtma$R-jp*svHxQ>wXY*RLPvaoSA^0|27bha=g6p|;B}G!SQt?vEHwZQOYNtA0Y2QvEjOaJ z{0>yON)|8Q=n5^w58sq+!cBZ$xH!tx8OtXvXpf~y$Y|4cSlvg=du44V>I5EBNRy$0 ze>fiX(4Ou~Y!cC~za!7($=aNUXCYP~z@Rk1pp2=o^S=cYTPdSM6;^5$Tft1A3qSgx zQ;b!3E1HfAL=Cnc#LRib6LjJJi$eFYwQ5;{mrTmm({9~DsjMEluBoj8{7}T})X~cj zrs0$8_HI8S6dp>=D_^J!h7<=)Mx`AN!Y?ZkhkQXO&{ITym=cEZ!*Q?84qdR=b!{b( z-_N3xxP6CDyFoYj2kP0ISFhxSZ>$^(&Tt|T=Z_Ma@Xh(3)B6g-24uU3(mjXmGajT= zY1Pp)PON(luOcP@DxkixJ%+;<0jFzP%~@w#GoKT6#^UWRD+fP=L{^@w(0EjvWK~WS zbuX|$9x1CxoMl!P*?GeZe${w(Nrc!rOvHa8)*wHFa)a4esXc6a0W2;i!?-@bBJ;?o zk~eLLSz(#s%98aC1XKWYQ8pBCvNBbk!I!n~lP0vvZ&@#USo{nIpm=$}I!`(XFOvT2 z#h`pq-Eww;zCMI^$%5t`n{oA!EX?7YmNNJ^PqGvG!{ASypoVHAn5{~(H^cmLlxHX5 zW#xapoK^8=VqL9oSbd@o(QL!(x%;?aZiBabh;gYz9Q`0gH_d}bq>{{gl+3Vrh(g`RcH=u%4jP~L9GEU= ze)ldfPZefS?en}l;(KkZh!~VwDph2t3mi<;jEfU5-;)r^0KGQ(Rk3gKj#@^vNE;~m zUa9>OP*$CU#=i02m zck@ZX>(n>E&SNXFCCcQYmDPL+HVjLi&U(EInne@(DxLDkG1Hakl`u-U%C740NlOELHJ^ZO;@!7YNVsUP-JqFx5n$`JvNKLPe7Z4#h?RaFs z+?rj(2j=fVW)*+RMB(JQrMbwM0pZndr$-mOuNKc>fO_qwHOxk=1Wm#WB&|dT5UUkr zWHN8N{F6WPrzIZ2FU-NopO!?{wbI0_bAJpCuqby;j&L~;E#)6#HRA@xtgLi)uM^UN z$Q-?ZYG-Rxd2*T2%7XRhdak6PzgzE>2iaJ4L$K4V!7uPb4mqBSD^AV+rR&Cb<7<|m zHGn-Ox)o8_Hg$y)27)25#CQu-cphrKG%@fN;_gFm-06MxeSrgqN#J@h9zpxq`Sp6Y zWCiP4P}$!Vx2olLW&lc968{+>3_kGWCtD>WK=k5LD_nn*c~Ty*cOfk_*E409O_LKr z>r0h3J@DOlw<=Mh<#+mB%el)eT_0E$o_(VLatf>H6U0C9T>a$Pg1Zb#msNEl0#;&E z^Fimd^!K*chu`d~)@_u?!LOeR^Q>H^D?BAn86pwa!A71Xf38X?3y-CG@Gw#Omh3*8 zu5c%}BL_Jj4T8*`beS?eB1LI^jTCp9-`>}}c{%+XyV9T0@^Yv0N7=jq`Gv+u1T{D| zjAu!6#c;;F!UJjE98)(4q&Ed3m47@Jm{-h}O;hAkqB^np_LWyNL%*HzrqC#hGiLuP`v$fIp*1(teDdv7LUW{IQ1=vS*Bu&vg!o(WCVp(=Jve|T2 zk!CX-m%q2-FkWgn$Pj1qD)NOZA?2YzHcyIE1#$?bKBbAa>aYv*GVdQ1qdwu*4o2aF zJtX0SLpGI`SuN+2Oj(y$g-eVyc|g+`XD;=~x>#U~nMbh|zDGpAC{_mjSSx zm3uurE6@D-z8nOZe774P;>s0S@9@$3yZhqjU>0JA%UILF>kfOKVDt9=WA zbQR97Dn4GC61vX}dXo@&k_L<$JFC9@{3oLn%vN%&>`8aK?uo=xUlWIK>0Zoscnael zF5N!SYx~7z&7+E{T=UE{Tnu}XMdk)i5KAhlNy3}YC*u%amnEf3w6Q% zIhrC6kIbFHZwKbC-oK_^dWx*b_A~x~v7WWh_1qb>lQahJ{6@*OnF=BY2j$$wQ@V_o zjYU?>srp6)!hxwI5vDR%#{its1aGKy)%(hSTJqreQrBfvLb^kY9`=*7|{;l$CeiOR8@q1AER9xN< zK!th16f9FW0{fE~2taP(Z-P@{Fs0@-Hv{3nw*Sn2bF~Dhsg_?(Nc(gy*$!J@NU5?7QXBD10g?YVJLZw?SFZ+;cbYkzfyxt*SiE+L8#XNz=i+^YY4~tW2CT~9T z=KEkx&NrGz+YTx5I_=b1GCwisc;_w-{_SHhsRhh?7$bIsoNEU%t8dh|!IxA#;@}=T z5%0aQ@P+7)o_D@NcSp8hqGL_x4g{e}66~mJugZ0~KF3C`mddW=8COi7W>J85(O8c% z_)>AY_1PnSgqMoNB#L3Gk7%i z$+GTzRsDvvkT#jJfvBPPj!p@uL${$lo%@ef49gSEM z2h)@KZVRR>_!xDG4f}Qfv(ZA86^HDK$`JCKjPeJQ$FRr+?xl63u5?|FpE z>G+3lZ?@yy7yv1X1<`%7f@<(_oo>{h8c=9(+e}F4ieZ(0rt8pI-9y(I%_tWSWBp86 zNNrD-7L2Xfz^~@f?*{)t#tMAhcbFA$$R^7V8?-zYqn0@(+F#s|@!5(5b+P;N|FtK` zCI^ts&!&K-L+zkrMwKjG!Au4)fJQY_1)xzKNqhn@wH%ck@ZHu=tU?a#hW$S5mj8(G zeHyc1rB!#Ve#!oo@dGS7c(HCN{G20C)T^^!I*Y0y3L*Dbc7LdX4posAZml}z>1Vfu z7+0i@S*|!wAY^$h;gNfie$b^&P>_kL(HR+-v4<~zn^SHVm3D&+#O>~kE1 zBI_pd7pqM0Fn&dJX?*Yd=Jkx>4Oto)ZkbeXTZI-cGs*o>)%|CeZ9tkgUq%qX@BmA~ zVC_r+Qs?J@q|5SWRF0>;P7c`de7sgQT5VbO0L4XqFDs|UF@m*kCJm@%&XqGpzLP{D z#@)gGTvC5ZYd7wXzG|Q|Z)olUasu6QiFNbl2RHy!L-O@XdJ-`2UP8wVhU^Fbh<=Zd;vQOH;S+4opkVnDsl2|uMc;w^ugh_F?nV+87AJw80#oKzp>f_kKyerF8ULclQGBwPeIT*AthtfEg$Qt{-dw!ArYV>} zlBN1oXKw}QElI2|)9Jy0PO7T>XeBbCa$NEI@Ygv4RkDAmK6KObs5T4QQ2?_$51kx; zpzf(mZ>e?9iUx8x2eTERHnu6*kg?N~58NM*_))1eU033t8FTn)ZL~Gj05JMr6X=Y- zyv29kUVp}i+C?7r1=lz}kvxSuFMj~}UGi*E(6j+|>i|IO*uchDQsur|(&M|HP07b9 znjCsompoUcqTT0aT_$EbrZ~wa81mM;>p!_O%UXux>E?4SR_qb?O%98*51cm`6fZ`F zRI-GTDl}c_u<5`LP3*_>Y|1)buwSFr4xJ@+fSUn|mXaxS*zRUfeGbxY%QM7e$nWcO&M_JI9RY#1I0oN)!kOMWs73m&N{hs-?shTijTSXS%$iYTmo zYxemY2h|*niX9%*j&z|4q6)rpuMb*ee*Tc*I@8EPSq+qt1GbMhorjhG$%$H{#Jf4o}vHkzKrF!LT4tT=`y z{J^Qtz6sw(pv;yL6FoEIEDV&eeh{~zKXxMAujzrduGzHWcd(7Gq3-M+{2Jv+B%l;^ zIb%DdEA?R7k5U>oYSGQ(X+?vKw>YD2RY{*y#}mbn;sb%s)pp=+{Qdrv(ZmY zXS6J`u%|~Qxc90Dp|s~jH?G11|M9OJiX`GWAw>W|$LUf83)uJh-(MD!pZq1dV@r+vH%p>Gd;|BB zn+aX#W;uOTs;gviU332V@Xmd|-K$e&>1wJ6%ifpW$lXqzYMZk4cdwOSPNdP3FMJ!W zbn-6Gw|OSNJEV^zk^i&AfAvl5-AZ#?Lg;Lal@6zS&r~ifsj2{eOU&r(_keuE$(<#h zE4ucASN4oraP6w}_yC(<$8v#C@9<8gs6Ly@bG^;@9MUxr5&z0=n$^2$-+*LPTO>n}yc38lH#~+TRDHZQMe4o0wm>PR> zmy23lm4;1z-mPH%)l|NR&~iyDupN}Q+-=sgV?eHqg2ME?_bn9pWISu^A^_yHjM|sK ziCITHXWMCMdG7%?YY78Mz=-Ll^{N z((gRNH;*4gC3CwM(Nx23$5j!QT@%c{o$Kr(380c~OtBre#t`kY0L86b|C9XA@%0%8 z(j^kZ%+f8A!OnwaqX-s0@NN-JB;pr&z7@RKmeI>;=KafCS^G}pIGrz3abw;kb^`B# zoxSNb$^BPKW4C0ns*y2Q-rl=`UARYR!Li;DeXG(N4RE*&&G45f+3L(Bk^Wd}(en}f zTZcSBXSz^l1hDdV4IoF8HlPb#*jKns^u1FXEo=7KY2)Pi(x3(9wYQJa$rprOx;o?j zYv~p;KEb&MWUdk|wT{TICjZ)I(;qYp@P{*+MCypc=ACbT%hB+Y(2^;mjW+I0_&J#W z>6>QZ_H$DefWabFYzz^BK|7$6x?;U~OY|}ONaxRMEGy7y=Yn~Di=Q>!3my4;Mf6#J z>{&xt3sX|OdWV7Cl+47SpKr2AKNdI&Sk*a+ciI_dXKT-f{b3LOta#&E#QpC&Mdkpg z)qUH~bD4Q$3uLcm?MdEe0$6FK=8p!PhOTt)C~^&UyAL~30DUuOllD@(v@8?PMQ;^Z zKBE_7N-GmY@&JeoIjI_fmiIrjcy0BZo?gdZA8*x`Jj5pPJ;)ra^R!Q6aW-y$(hz@u z?SZW}`?;RgB@^ha>rAZbbd^kaE_prr5#f*)CHt1(cvfi%D`NN6KRO;zA}b_w@|VCe zzhQqeD3axI8#b5$fS!hrur#Q$-kwZi$byN+B-arS5*!>iFdPxEjhp3cQdz-=94p4Dt|q5Wc}%U3|xI z5F&u2`^-OHkuB~8PEV$1o%NGkC1%^Hy8ZSsH^3IqS&-9WAQ73CazPVkEH7HTVdnsH z-4#eF5PgvwSRU9ab>YlMwVBBw4k{}D@k*ghwdpuHDs4?l+D^N661iFSVEP|S;e;Znj08_ZmVO%z zz*4rff!|ZwqcQQyt%{zePQ2 zV6O}g-Bs5HzfjPR(+uwA$#>xJA5D8lfd~x zDLH*E4Dr2NyJ$`!d3f!M4YNO5#^x8Jq~*3&*6r=b00*Z84xUk~CyV^UfqM!*U71SX zrIpO}3SgdeTv2RCgQEJ}QDe&0hKhhyds!}}7fEHnzHBUMn=lb)=Tqp@^jr^a?QG;s&=Iw_lW{NA^yZnvHd~f{|AY&Od zM1gKy{a*DGBQZTu>%c!n#!{oD@rvXgrb^`AtCTUn_2s^*o=3s&-MICnlY8J{k@@N% zj>fMsmN7gboXHwU8gwjrDqKeb!Pn<>e!uwPZ!}pQ+Ql2Q>Mp;{&REQ7-0%CZS0-oz zqpI{JjogX2T#QCbnI4g>k!JxMc{gsiB7O_YwIcm9Y0uRs!a7?EB6`VYY+=a^5koLHhmPj$yHqjm?{92T7EQ)~4#7=r0Pt8{3 zN<>~t$NpzVHuihymFat+Gp-p!sYriXqJoG`N}=OGdIz zzlQbB1wJg}e4lv}qQ4%COf}xny)oX%?H0*_N=e_Fx$f*&wM_qh!S+vFFOU(bUR-1A z>5I7U&|yd~Gta$fcSd)OS)ZL$b^2N+%Kr_WhE5^uCqh^D{gTPIy}%B3VYzJMRN(kw zO@7=v4**Oo+U-vwPP3L*6QwKXI2~cZS1m9r47e9RVI~iCEid&LQ<=nh_^isTEZuK3 zV94{FU+S!W3(HvghIXCZKEL`Hb3diSFl8UDtpy0c(yh^$Sf{E1s<7Njvz^M?J{MG6 z)WsL;a1CNNjFb?IU>1~;pKrZBE7o9E2-}>lYTPD@IV#QVA}V~JI@f+g)z7?rJO})~2KS-r%K7ElAFH%}WXaUr)0 z{8x$U?iURoJIbWvwfQu3LYBo=cP4E@f9ml@V8mA5Oy#s*vb--E(gw~H`LFiIkT}_P z7$)wwf`F5sokmcGEX#vq+>iRtNvjwVeD?93KgscF6JCk>aL@# z+g~$$ox2!A{R$Uo4EHQ}SS(ngD8f;8yZ#04*=wNvdr%N+@FeK@i}ch^65YQnmy)|J zrVFsu{e6o7e*p!p1`k2Wpj^kIjI-gDnsYq#UXg(MUly-#_N_x0+!J+y!6q7o3zC{d z9b`8Bk1(berpe9UfOD|T8JD>K>GSLIU@c~x4)}r?m}7xyW&kL7E(hcFvKMDPc^BxI z;)20PS73rF{h_^0mu{txpMb-_Kx?b$0(MG<|66_bkUXgOFNJCJdl;D-p?CJY5cl+n z)<>MZaJF|2$zH3YWLoNf{Bc$|z0^+a``}2U;d?aDf0f+eY!#wz|Ia@ONq=dt4oM&W z*Jr#%{<|~Y|BnMi35z@umi|8jh>{Q!mi+GlqC})6|1%O$bgZIgyU^YDTW`+8x1@ZI zlLfVh_px8zd@83ohh$YMY3nxsQZtZ6myIeUJ_l{m%b}D-uDqb z9&=x0-BZw5P<`4){%c_0P9tw{Y~Mlt8Gwz%-+G6OUISYs^+>BYM==yV zXHerG9paL59Y;%KU1gNLf-!CCY$+)EODiM?JYhGBC_-T!?^`sjw#1vb+~S;F=+{nC z(v}=AqVwNpe>_exzy#n!LI09oHM4qzziDlH0VCO3{9qWZYhVC%GtaQS=F1Rj57j+}S zr68IOwPWzBBIe3g*&csu^Dx?`B>ck9ih0@-l^6`Eex;*|^3-EOHCHmQWZ{@@aAQ4# zGk*`RMCd~F@pv8v3^ph>t58wRek&8OBh+)F+{mhQ(OV-=;*<=Hkl@%8`-Kc4zQ+98 zXhv4NP){<-&^hCDm)nb|v}YBk1XK((P= zh#V!3B!`}z70hc_1GZVM(i*2M6k>eS%pyj#`ZfTL6lA>`@GF>nd!)l23K5qypcIcs z?Jip0*Nv0tx#3pbY?vg&5QA@q9G+&2FJMg3=GnbSh>%t(?XQ+Af#Q5-3pxz%F~<)_ z>c?v9?{}q3Jyzbu4{vzAo3+{{DOGjTsZIkt*u# zR8R(oVV?ZLC36=!+9MC^$6KrZKGY=L3A$`3ZNO!f_G~&?x|0f!*OHP~EoLk2oWzZ! zDxG27(66D4-GGvT-*6Mr@l#gr4)!M?5EWPf_6Mdej`CNE9(s-vnw<@#%cmG}%kM*g zION-u7IqW)@jqpuQ}ll4mvpnh*K8TU;=%@{V}lI5QjfLy4Ik<52$cqtgc{${g^C+g zQ8KU~H%-v9pomd{=AtUp?lSCU>gBb@M3b#x=Ynh*X!GGf^?dKQyszp^C4r+ zdURWAVnEc805KIQ5DVIkHn6EfDzYrgm)Pq7R<8&4t zj8u=I^hyzr4E;hW7abw!X4%qU>Coc4F@}Cold9OpA(Wna-Cy+cyw2KV@Zr&0Khp~` zqB2|mf^z$;dqqj)h@!YAyY#|FhpwZrdpm5iH9()=c{6Ke= zWFF?@q)}iRa<@hyN6W;)6O%Opi<;heIO9&P~GMz8TeLbzV3&qJ(V{Qc)P<&ZcvsN`w9s{R7i5~bI7 zrP5%FP;vUz8g6rKYR!E3RsJ zmS6MW8o_$`2hO+ZlzQldUOY62L!!Ikd$Xt$dX2nLGkx?LgnKrde)Uv^lHok}X@Oo` z@#4Z0ZkH?I4)!FONUWt)%pKlc6AHKi_beyKPHWy1h4l7iF|T&0BfTFif>$ChaqTitmc-K^tv$H_BGH_sHhhqpklLidjE8{&vK zv>ro!@;u^Jr6MB(jq)*ib!w%XS}kjUJT%ct*-<)=_0}Gan4-H?a+IJJpY`YfYlISg za`rEvcgo*XTKJUyn)0Aea+;tQmZfE-8dhZ&O7VrNTg5WCEhoS=?9?neZr5G#Z5tre zpbrh&klgT9H=Vpgze#$mV`zFRYNU+b?LGU0k@_Ly3viCohByP(?Ha>LZiialACg2N zVrfv;>Rse1Wley+?FTD>5^WO#|j#Q6+% z0F!wT|Mz~I(#3JX$_+r7SU;vf*S}Q0JU9sS1Kv09kE;InH5aQq%L<4lB~*TVOYJS zrbKD5XsGkbCcgXbh(4O<&L9J}{M(T^dcF%0PlET&HfkYmbxvi#e7$?nICSTH`jb)? z1ieCnFOj{F1R@r@*FLaP=%~CpZd>_e?_Wblq5war`U+SLyGlv5#~x<^yI1#DJ{nq= z34Q@q=}mHm)jgC$j}kP5Y((raDWDZOKr4Vj3iBSdql5A&nS&^k_zjQlY4;V;ZM4{OhWJxG5F$@}A%Zdup@_#J-$=TE#?FHBXRl0gu^M{dJz z7T80)`UUVTg`uJ>AYjJO@#TQacO^q!=-fiFuA3`2^=?ENx;6;PtB}Uz(>vK{ zWUG8qrw>M(vF1{`h&&=z-0|bRh4IK^jWZ1}dEw(@ex30x_0N0H>YiZR? zGb=VPI1C6nQ&R5ahV#nQ=>?eu?hs=Ib&IWdW~t}mnAnhSTc)7sa31*SNk*I!M+jLG zOD@5q3J`yK;acDU_kZeCu2+S~HH3>L$=;jcpto^Rdcz zqc7B>9TNofRT@kix|Yt&17}J(XHzghM~pp8r-Tkb4t}32%#wk@NgwfvN(UCncU#;p zZ)Mf1<-JwFU#HR225hsQ$Qh=J1*<3r*B9&ET)M;Sr=4#T%G8frO(FRb$rI-ULXws3 z@fcR>DablDIawZ;ZmQ)`o&_v&-g_XTm2`A^DshVaORakF^<*!-1TdE**>~7Wz1qMl zcCah;;>x_WL&ldYuJeHUg6i!F!Nnt6C3~ucM9|I^K!1pg(x)7G7>}~ei)Tx`Th}f5 z<(siwK>YpLtv9|&R0k}W&FE%i*`CX7H#ifI;rR`xs&A5Zq5rV0#e#gx9E7r1f}r7W zURu4je+P~Tz+4Q_CJ+45pP`SHn*nPF5YJp+09u<2x#SMc+WMfh@Svt%!RwBoq3y@A zST31>$4}iF%5GqG0f%x>XPCF>x}*IHrx2PVQUSpMOPTkP0eUNEo>KhSbDAeyughh# zG!1Hj1U6egoXjFj>|83CEtKPCo)Y2+FC4JmoO+To$!j`4%{f|PmiPr2x^ z=Ymh5W$A2kkNsFt+hr;bOuPk9oRh__VpKB?ys(XXa|f}rDQHMr@8{!}X^DXWvlX z5m9<+Q<4f5>%{=8k^g`H&%wM!18yRCJtzE%9@@EHCod3k<=H~D(n--%x_|!l&!Gdv!43 z=(mGCoR!6OGX&(}>3k;&0c;p2fHd~D)1FC$c3w97!J1@F91t7tc~Tu@qEz#MfCxxg zi{H={xXm)Bz6P#w`4DS^6!c*d4{D(GRTz<2(8&dVK8{y-Z-CC^qsJbAt#FQpeyQ=i zUrN7L>UBeYU&Wq1$WdCDzf5`kphgf+E5H_$74W;!6g{e@&hS&!i-&t@<%5!!x%fw^}+Y{q!-dv*~^Y8ML`J8H^c4$Ez_(_j1Z`9moHQ`viojhuOUc2rd29`sPT zXx^vT21si|Zz)5aY&5lA&l7IAhLZq(pK7TT?i3BE&WY5=$dd7pPyL~87(CtMTA?00 z+^L@bCJT~`odfE|7B_M)71d4Tbtz5(XA(60&5eB>m41t7=k1ZuZnMu4kNjik-|6dc ze~AjcGc|1Cpn#3?0Dnjct0S1f1}N#Uwx;pl;&$IXVFIo6;Q&l z2>rUIX6=H*tlmP6s@cU}zV={_34ZZ~6<`J%fI_+8r&7gwLCisQ!obR3u;v}+VF>dP z*=^>!6Ke}pRg^S(rDlPInA3qo&pk+5!~2$o9zmWx@<8GeWd)?))w|@WAoAnky&DIB z3)(W2hB^VJO%QF5J*H=Y#}ED*$Pq{qm4b3k!B)FI4W$ax8wkS!NSrCLPqLY$hs$ao zWR2FVxMc*226FaMC6`Y0uBFu@gB=~m+c!+uC|!8xfeDVuJ@yLGR>}iQoE|Dn3#=a~ zKY(r+3PE|vUfXOZ&6M4*lYs6Sj?YZ})$`fBoui~(H&n}GC~Hufl|Ift>ykJYsh089 zkBKc8NbJLl)Sxl>*dq?pqtk45=rUd&I${bf4So|U5mt5{e0_pnq(@=_k%K)8U!Ri-tJ$*N`Z--NCMrSMM_}|dJceFTy&yFX_L>!d|8&w<0B=gE@kpG!ZV%P19pcr& zmUsT67U<^aW{(2O1VaewLCqE4WOJ1VE?6Di9$BxMI6d^%3(3>BM;tVfK!pl7jkvSz z%=u)2cVkK{9#uq)<d1eO75(YC?hm2%O5(CgRC{|Dyz|KKmUo8H^Y%IC<$ch8o{75k6eg649FWi=@```SmAYna|Lt;6Z|6Ii$x>T%2k)uRL{L zVqd}~U0!Zs7gnqkG|zruaT%_^)6~5B2JcxA-wr6PWrj!A;t#2;m;n8m7w4TK+l=%g zR1qC|%SIv0KSnm_9hG=c6yPgWQSlh2s5@?aapDC+Vsf=S(qM*NG3QVN^r|BeS$S1? z<+YRzM)3R=VMn5C)89)4;6mS2Q6AZgmcIisl;mJh`aMcsS_W~}yb~CYQkuv++pBLs zs(7?TRIf%$(o@p4_!C4;NWdLrOlSv}rDM5>^NN1_TsFXc+Cd%~NB*e9KAE~V;g?E`G7+Rq` zFzKvJG(GfJU2z>NEAsHuyT`pxMGUmt0TZ38SuH>HBA#TaWqOKDd@BV@twK%6S~iLF3ysm&R~ z>lfKZDZhD7IWfmVK=(rk`iC@X+022GYRoqSi^CCGUnja4n^cXWuKXp*Oydp3Y0)MqX%FqI z3P4+Bq#tQfijTR&ZwWrnGg(U#0-|GhhYELJKQymY|d+!@57!h3Ao_v9i#7LKSuGWzMue5+4{r*e*0@o<`U$@E$-Rl4Ah&caEtNi~B zL>wVWVX6PTHL{Tvp2Gm${U*7*iESwIvKS*$OTEu7bW7##SD}X-)QoT9G8IK`XNxA$ng8?7?Y7Uyoz{6UCNxUxK`iakcmxg*Zy#BlHz?slvE0U)5pMQz3Eftv> z9{s(zH1s)OH5$1HX;B!lXbOjV{hd)QsxP)>N?TogSXN(b{h$8mP-9#ZaneGj=-V(g zO~O;GQYVcLs%-F4a*X0dL&Z8yDoVYA+Af80H*E2#yZ$%OejSGOlPT$We!`C?jl*u@ zDZP917xf`4Ondmd_crp2W~&p^+kAP5`pUEl*Mhe(H!|ZOHlfuY)8FD$@DID+wVaI= zF(u6=ghHgn*_SwWQrd#Qzt-Y#dgkAfHpw{u!86Gzo3(=tQYw2DDT}_(3rl z8u)TCj`ixd>20x$`Ely8m0vB96KY;WlxbTT?WXA?;V)qwZf z?5+rgS??xdVAsj?pL2OMjJMO?rH5*T z!WCB18neZdJ{5Ej7q;rGOR4K5Q4gY{I8``(H6U8SuX!!B?^CjhU6rcQWA6tz;pgm} zmxfT$KS@m0VP$D6GIdgUE+%c;t$A;O)=v(2Ts?wB@l6(W=FqsdGX9#Vlh{C9gzyOx zLmGMCi3U-{T(7N(v6hmy7t45I%OdzD@s44LNX_FCuY27UbYXKIkw0H*C8-T`|DnKh zi|XD=>wobbuO0+DO|5>teMNZehnmE3bv zEGrCU!vc}!bb%tD6_gn#uO{~u|G4*gBiV&wM+)Pf5bC2uH&@eQgNM--C zha#d0U`c_PXe2QjMB~M%f9l$<>}z@2UZV<`dZ$*FPI#{M=7i%FnvF#t3W>C7!>8Jz zi?t?Tb&0$bif-G+t16r->9)N3?sg=qj55S5`%?WpW7Fq{wbHeiOs2;PUShh=Pmn5M zmhb=duxk2?|9JQ+xtz`mNnH;=l2_O~`&i#$zYLXxCuEPF*mB;wefgONio!goXnw

*yqn0L*t~DB8@Dg9D_BOq0Wk(61C3G18xPliz(m|$O0K(RN30jA zt1;wpDym@ai}rJ=YTJvM$dK5FQuBB2C>d>&8($}7C|;eJ>l%qB(lwRYQ{XRC?YOok)dJPaPN-pTCAIC$o^vM z^ggq0&ey;`ReQKEl<^*kB@2H?f#!j~C6yLDDKY+l<0%bWIs2?u#^i*0%TT8ON#Wvs z@#S+1Ch-&BT@|FfsCMdo5k^7cSU6U>=+?J%vP2PY7O7eLNqp<|@}6)*KD0F?A%;uo ziTw|N{(}Ty&bI|Ee`bv_7k$;xi1-tq8wDb#`J&%WEZM=yX7I`do6G3}SC5WCb-yf1 zV0=JgDe~+Xl7dc7*PwT1((^bD1(6T3oNC)k>Z_4D#g7)*Iw?WuzR~4Hq)~KBS*mI1 z>VB_mOwOR>y;L%`zErEcSR*&}iVIqm0~bWvpe+#;`At^8kdKP;@R^?_Oj z{d)@cCT~QM&vQ$a`H(hPdy2N{8vJ?%J7RqYWof|@Fu*XVOb;;o1rq%S%ru0tqY!;=y(H$)vN02HjG5@u(Hv;@1BDIDt`=uAxj5NEkbO-U`D{z8FWg;GzWwzFPLF7kwKF7KB$6H_ zj{HWBR#}QTYa=q0sjQCfi$nhhdv6{N_4_sqTgEW{*7!HnLWVFm_{K zvZujVGYBy#dzQ-DLRqpeS)wLUgh)vCqLSXv^nLF4c<=l8J@50}&-*-oyvK3(Pv-Nv zuIoInb3f1PoNL}*Ta1wSb||`$S5R!Y^Ens4mj03lBfDNuAfUW}^7P6)M?|=|&qfZg z;a4{|=gQs@WGo+?N)_BX7Rr4gR?sOv2NTTLtcPuU4B-gO4rU5V{&C}G+xIg;glJj0 zLfFU*rHJ2r*1yx!*`0{%XNy@-c@t`#;%t_Z;bPdC(h@t{>5HmB8sm?~o~W$&+^b4# zg$b05Q%M*2%{V@Kbz#&vUU|9ovS$v3cPY%2zVo6%-ws@7Q4>&&J*95I{j4-=$(uml2&>T8J2(J_ZRld&^X3{A(w|j zG!_V;JyZmpt#(iTTnN~^B7nAMb6JnElLdsB*uK7ohX0YbvT+Bo+aYaF}NT&^@s=)xjImbEQIx1Z{B;u%8^g6^oTM` za;qm4(=0--hpL%jr={QV!Z+92WhZ#Ny`ieTT8DL+1&MB>rcdb!4kz6G?i5A-x==rw z<}P>zp%2yxg1^$N>`wh+6si;;aZjl=_Wj;wBjAFJ#-?7AFJ+RU|zZ`2eldB$g8 z2K>eXjG5zd{+YP6hrC%q<2GeRnaXf_53T~CB=WP-pI4EEm+#h+ zReFQnnF$VE$9Yfx1lw`tVa-%RZ@ekFzlyhh==a+WX3hya7$L$J4-+bc05bC|MH_Ys zl+3ZHz^n=^U%l(}sSu0tJ;&eSU503asi42i&6I2}l^iQSmZ#1?!t{K%y2gMhfFv9! z^p5OYE_PQyvX)~M{2O`lo)tlaT>P8*xpBr>&2Dn3rfa1AspuJUJeZ>a8H`-~WLvRF zBQK><+>*%$ETppHiz+`!;0qbOcKU%&)3*Su*@pT!p*n@(MRRxIqnf~R_#INdzJSuU zf(~Bh0SV5WZt#Y_GRLXBmP5&;YV%f_G|uv&#}j6B18jEFSoVP#IUcJ4gH*ETALJDS zE(?>%Xjrxew>D{*m;?*leH~VRqdFqk&cJMO;uEOupo~a3H%brVh+hq77(QiS4rJ!_no_?^r#?t0%_Y&cWn94L2?d8-DF~Dd*VEh1G2POSLfitCLa-7Th*K zCjA>Xt%Lh*Y|Be3uV?%GbajhQe(?@3;?%KHtR6--J44;`e?u=5k6lce4te2p$}wHI z*cxUfA}Cz`B;A;hu1;7{+UC;smU#dYQc=Ts#GqwlqX`Lf9Au?5^fO}*Oy7|IhHPjIz=P1 zaEW1sA0(KFl+SG4aDfo2gG)QRGiZ#qZ;xp6+dbHeD(|M+9>;tos78L-jXvs@ea;o|jyw6FaHMArfZmaTMhcDZoB z^E=YMd&kVvXHVM1&_AL`!F<%_Ohgxqa%MoTGrqpP5F}40&)YTJ*T~=d$OZ>{+ST5xB)QWxy z1RWGTeMG%&F1MUj)8I@1-EK7D5QU9ZZ;ub|@y><)Nx%9N`m0^?444?lC` z966<^2cH@`R(>ZtS)W1wObjz1C-v`lb$PDIAH?6iJ!@pX-Z*4g?!oG7LI&s59XO#y zU~>~7*E))c4X4nmpOy+z@XB67eA*6caO!QJ>qcwKA@{L z#{v>dD;)&|(?0CHs_OvK1Ec=-+s{ut=Omy?LN3ME_3JNc!VYi@!%;xYu=NzzdUK=S zC4LN$5TK_`kg)u`BeTlFQuhb_3w?26j)$uz48v%errG1q8HX)4ZoAkVw*>5SWNyfA z#I8(D%7)mGBj7-b|M-}g<(PjSYxOA`=9iPaG2a3>Zrhi=4BuElpMr==D?b$+SckN|%vf*KTrt4d8G8y&nVfA5QIf zX|GL#N1sp!{&8HNu{h->{_M={GyhBnAA6%a+FN--#d*2>(6ns}A;N>6;h5MLwsV{b#9i|m^HZiJaLABe#|bxt%qJEi`qQGH)t$pq%? zp|X~*aFcRU1@J=L zqPUugGsW7@iwfdiz|H=7^*IoN^`8sioO81U<^re>Zhn##GiboZkDuOD6ZmI}vw`o| zIf*X|w}$g3jYj3Bw}&R&HVJhH{1zHly|vxOJ3UYoKdFjnXTX`1yib#96wDyI=b(C% z1T5|MYID!bePp^4bj{}zRib`;TiCy}(j%eVT{8-Q2SAmMBOfBai2OnQqHK*%IH{2w zx0osDR4yRNv3=}&&wF9CY@``PCP zYXzM{{2At>OB+&j6uAi#9O z?}A;LA9a7GdhwgT7!ht1nC})n^r%Nrf*9Zz748l+mvySDeFD2mCIN-ny?{Byn4!P$J{#cIVDr+BS~l z^80Q-3x1z;T*DbH$T`>gRAjQhGKdgVKfbD(FLiDsfce7?TJbLSLUb(5mb?UAT;;rm z^<8Gm+PPR?Puqb}Tt~@5_1p~J$P0T#tJo6wdOM%hLm#hZ&F>o&EyW}4hu3e`1raK0 z^>n{ZeN)Lpvq=B5jy$kVzZf*;$6LU@Z66EpR9jOG696KgJb8FoOViD>bIW8OpS3cu z`0)b#6EsWpo!0$;OYy|GH%8iuMIfLsU?y=An6CQIbkqZhs$>p~iSpXcS%c#jRhm}5 z%=Pwzziu7!S&3&{KUeT-RU|vPW_s9-BN9);0PDvLXiLk;MaZeS0#;eE71=NmD@_jA`HF)XwSsi*!@WP#Qnfa@eceK#D9<~`}M@9CFFOn zVqSy+W|!sXWg)|$7kFA&w6^B9*JD4uz8D$auJgU_4(t+ps~bnZ9}RK=AcU^jpx3GZ zWFU_eTM!`*Et=8$_ifMx`-nq7i)$bN_R7^6O`9E+vb)6F(p`rwPoga zR5j1cbKN7Vb6Gi}Z81QAC4Ca|^Fq*??BAGdl(}Si?XD2|_dCunjm=uli!@=X*rk%b z23(~MI#1OCdboML`kx?e2$6(4_@o19L%(6?&D%cK%XBdQlGgKR^~jrJSMt8yH>trZvlGDGsTuTF-+y|Yhm*oDCy7F> zj{Im=L{ze>!^PyFF4syY@2Y=lx-6bfMs8;Di))okQQIkII6|@Bj=C6H~-tu*2K#4as490P+XOjfG@@ z0I+JnffUn(&bUU;`?c<9qqt|%C%SA8R?}xEfNz=v#jHA5Z&4c>y_f)zNr1^GUeUew zGvAx=sOp$|Owb_7@koK@epu9A%^r4sNUY`15KO5qeA^{_GbGm~GNQ9J4%t}w+it-GN=Y!_1UT|5n9(E>?}5ge{eY#yDCF-w zFiX|CRm&U;aeeBAQY_a0nwefvLrQhT+R)tN+=BRx6`oP##pv{c%_$nx5E|6E{~M}i zRN*EAn#WSL{s-eoystS&9zB()V4zK>5kFa+b6uei^y`C?C-Z;N` zxn?2tWpxd%$7)efu)O~`%Do!$HZz=1_Gary-%v5U_<1;!`0)&=>qbB58{=m{GUqt+ zw}$_`1wvPChIE|OpCzGhjFr-N+P_)Q>*r|61+Mj4YU3C4dKA$UZW7qhc)9X^R3!Nn zq2G)$Wki0E2qkQ+K3RUh+41M5bu)5Tl%}PBJY*j5i_#k|Z(a}ld1U#v$J1v+lDZPq z0z~LeE>tacT5bKUZFwRWv63pJ9lG;K3l;sl((*Mc`F26!&y}s!?2QAZ(#qG>5y?P- z9b4aMNPaGTUmYz9L!TZus(Jctft$Kg_yIfGBmNhiGlU2AHI6Rz^@@bGzcu@Q82Z!K zL^DaxwDm-C!IOVd4F>e;E_wkno(9_oRiAORuEFj_leOs!v>e6FiIcx=axJa1MdS(V zUb{g#ZTxSFs7rHYyQ+o1!j8|_g+v>6DI|TpRxN`r+b`Wa{cK&Bsr|!@WA0<=2*c8! zVG5h^u&DheAxVYk3}3=Jd6v)1#(#YhV|IkdGLD>Wh}nBJYtYm)Yw&9QTuKhC)w)bb z^29XixiI{xHAB4W+-`2Yvcg9*3E|Vvp1T_n4u7K~&*#oMTHi@*f8Otydo{k;%2S81 z(=2j@D^L9ehj-}33uxF{ot%UE;iZkb2YZv{sWk#!zUlAPBY#ExNG$K)_#~@0bge|+ zB71f?sVnMN?vrPXAv!vza%bs(uAaHBryE&VJ}YDwm(`jS+^oK1b!Z+OMieo3X!l_x zG}+zzq^UEVaNyWtI=QpY@&5E1N$IDbwZi5aI4zD$qJIcox$j@&7bJevdur6L*Sxy1 zbyRjTc|*m&qH+OycTK*<4CTeF7oL`s-tWp?GS%@(*c?=4_qT8DX8sX0 zmvk?uz}b=a^-KSfhYJ@K7VA@|n^#^~|2+Nd;J)+5aNbTk^~>fJzi$`&u)DLv>uiZX zW2N^MHBMMEB*DNF1j#(00KPyc75L}vHDUDaJbm28`S{x~( z;8@nOro6AcC^Zimjk+lRgKOgJ+w$SjneCxw)#ahlNM%{? zYyS~iQ46hB0GvQ-b=#ppU%S-w-q01@-EBio7;aWccWCNN=OQS^Aoe2TNP+g_1Ztax z7i)F?SJ7NugTOOw=866uDtYw`g@um_--q=E%&X}RH0oaiYB?4LpO_H4(^byOVScYY z{TN^<^ogfkI?zxJWfYp9`%d^|T`d?wusOIZ;v3E3rzt8-*k;kCQ zFqR~G%^^$~y5&EB@-E}?{*9~8K7PUKeyRzqA3twk z7LFV?q&i>O>+(^-r(v+i3ZYf!iqD!b`GIcl>m0yclAgKI*fTK9{1>~-a~|f!8Ve;6 zQ76FCX|vu}`#z^bXJW(l@{0*I5m%css?XX_I~`!LOg`y%)FNP~cw3GI_|3HCH@e7} zrRNp?w?(SVi_~)U81F}T3+JKz6y=gE0BX;#to#P9=pd1M`gNSkH&2niZGDtP7HZS> z`S7uN_`#rJ1#sb$#~C&F=Q9n#Uw>Xr;`-K6(||d~l>4Rg6U-#~TdLvmdj4ypDi`2F z3Ri3KS|kn0Gp2kVH}Ka(1RN~5J(1x$J1jLR`7QnggzF7$&N=?_Oh90MGjj>+nVg+r zQM*{@Fgm4p3o$T!o}1D2q&9zeYy+(d~)h($d9I;0hkx@aYST8?_Y*tsY3-M1(2$U)-sLONnA#5=D&#?+#5ca5FY8SOjSi0Xm% znPSS$DF01otq4!oi?458GHd%NdkfaLye;+W8*&62ra}|cZ}ftDD*T;Y9L|Jd=Fck= zE)7DN!LJ&jAwbnLP&gqk8xBSUudi5UjA)afl<6mDBVoGnm5H@TE~pcF)!Fu4!TN7f zP_^*|mF&s@J*|4vJQdl<1r^T};AXX^tG_sVj{};?Da;qr$?0Rb1<~;ON39eWm^y{D zB?dDENWe{zcFjJySbku~M%sa=+3y?Yq2E|SIp*xS#mhqu9bz-PB_z*m=hnUt?eqr; zWr?p4g+aOV(2x-tik6c--E2fL#ncht@|7pPvvJzCl~TRg@$N_VbqVE-tv-aMvk6Pu zJXYc^KoOzt@hTXoX#boX_xpLwdMRKgRkG1QNCdg#%yi-17A6 z^;2=8#Lcm&!I^U(o>*TO~HT+Yr^XETF1)OW*9s z*T2qZhQBXy>aog7vf}kHh1glou!o_ukuS-_ht~!;8yM#T4?tfP|6*Bte<+q0-f_GnspnxN#S-M+xlLvK`S_DrOC2XTuXe~LB+I@DmLGY_zjv$P4 zaGD|XiQoI&1?Zz;8k>aW-V=u}358{M%wVX5;~cCON2< zV+JdA%3rlzKn?BzotmDRD+U&s{b!Nioo>o6+5`0yahorAJ>&7H8+?O%D33{;3i>Hj zT1OW+>h6+?u@;L2s@IE`1*hM68jWsVE(wjtzX)aw&>gc&7yhUphr64CcDt64*R0E) znUa63{L(nOcpLTDCDog-Lp3m;Tq-EQI|<~%GC0i3%O=6Jqp?x)6i3Ty;5<>tc1&X+ z{iFChPult07umK4@k2!ZBwPkk9QzvWFaObNdC%*THS}Cbw5&ZZdcq4h);wWFsc4%G z_oL$+jQ#u|bX{7zOw~*>^)C)@0Io5*GANIEBF{VxceaM!(Yvx>%b z^YcKt798`MZcL`B{2+Ofc3}MC=XbA0YgdQOtaL2d{odHj47F{%jrUyfZ@Jil>c>CI z{e1gZCooCxI9l>G6#{^rb2gbgYP$G1l_mf0^g61uf+N_Oh;wrPV2{V9RqAu`^siPf zXN=k{5URIpIhs}KS7=&?S^$TZ&(H~FG7iUnPM+5+<24wxDYLbn49n+>TIHdzC(|pr zVzE^MNZ^S1^=sJ~>Oo~?2m$P!Tr8;)lT}a=s!Wc_W@fHr3j2>?xo8IyK|d!jN6!y9TaXpR=N2e6|~ryKlg?S0P-IvybK#eDZTFXLKSt#)k_cx z{E}15s8CszB`}SdoJ|CWe$MTb$Ky7(#-}bh4h(B8@!-I{bOK6Hz48(60#3;Zc(1&|JF0{0G+C>te-e-;NBGCtflU0Qc+p@cVHz zz>+xhWgZF!Wdq$9oP+r?|3Iw#r%MBXnEuLCAzMuUzk$50&+&QF2{<`kPgDo0!6F{4 zW>wh-pg7#88{gb&`nB(_f|3kjXNS=rY-d<^?`c4o2bEpE3_KB@plAg!LgqX4%`lCt;usw>k!bD&{ zS+uxOKbk?Wa;NWS(`0(yHXM6pS<)S<39E#X5uZ_SEVBzMK5k$OK7NL9mZw%OPKjy9 z!mWQeU%TWzz$Ta2W#Fn*4)HMG-m~FAZ#O9f3wo%=6l8&u=Ep;XG<&5y<7y20Zn@P8 zD>U$*+{NUWz3g4h2`+F{8JTgj%--uQZN*1Hg{0h)4nSm}#jB<1!PWGeP*2Nj5F6DF~4c? zRHge?CTl38AA?$&3|^{BN^H=k5|hFxm!3D}X0O6TNKCDgsWx7(gs8bn%|rEFWgG)< zT?#wm0vo#Xm)E2gly(_Uc}W11KFTmVBw{Oh2v~2RQIIxx?@`T3$prUrKZ;ofZTwK; zr3iYU@r-n*qzcD->Qu6^N>dQz{GxH8wnsBaIj2T_kDNRM~O1@J$+6$6Hl|O4Bv_%$O2sbgSP=_p^ zdzl4doyI{jr3kQ;_pS3*(;60r5Kf>h52nWXFbK8n5u zX5wlP?G*5@JC!G44_<6vKdD#AOO=>sA0BIR%o&ebSFhx-Vjw{;-*I!!^U|lKGrxG)2E^~00iYt5)R}T93LzFMnC_cV?)k>Ks z6b2#K%%Y>Y(II_;fAnh?@5&KywYju|)wL>jWGGmCkSY&bzdp(8kXFzrL#vg%F&`aY zr}QUY9=&0?3m>djBs+YwZ~>9eycsoixO%Y%rS$*!V`$JO?ACv1o7^$ba9qddTELjRu>lgwKfD@ydRc!i{7n1!!!V+0 z`ChYouxX~ERBTLBBC0@FWBo<8#9mR!_2$G3YyXMNo`gu|C*(=D^dRE`;L{A{_Tnm+HD>B{yzRe z)&Y1IHw6Q?P%jrZD?^L|#w#S)!YxSO-#5VD&&@9cuBKq@2k<7qpT--wJKiVQO~Kj> zAM6cRQU!op{lD-|O-A`?8Cc{Ab#)|7+}jQQ*HQ@IOldVikST z2|D_JZ8K4lKz7$Z0Y)M zFo!7i&m4m?Z3xkV3O}s9UX%Tc$Zj1Efjcp@c@emeK0d!Net`V>N7VD5dD5uN=Li10 zL86&>D^x8AwQ`%W9)V*mg~K#v|v4iX^`vrj;tg3mGs2{;2oH69=i8~;9b zQCi60=}YS*tx6Yg7Z^^!wK+cc>Ls>zxpuem7-OBfE7p+rV@@g%RJ74p0Xnh-|%cOgKuKFrpU*5@>Q+ zs9-?g4E(x(t{ZD5-ymf(cg4OuCMi(OhhT*2s(E(jDL9%awcP`#Vu8ZH$Mm0!)=Fv6 z*vkI=+2hB+g~X|Z4)*fvjB2qExRByPgk;u2MI0KA{R0jt^T1q|G)jQOqOU--AIJyD zjW8pK0bbCG%SPurL4T&q)FQZ12fuJzc)Qbk8BCGJIsgk!DC)V|p6uq~rp%}IlFlav z3>;V|IK?G5P`0dzdAGi~a-XmnV8|nX=mc@gyI}^C-}*HP0E5Y?kmnugQgR6xd#T%6 z;X}4=)lZ4+bpYS%oEYd8B^x1^#06|ve3$x3*Zmi4DKH$}f(9a)m4bwtK@AcDhADik zCp(*!@4ATT@Sf{qkj>Vn&2`7v%SzD4Le4d!vKm=UYqn08S*c#gU;-Ci0XA$u2ePDx zwmrOW6YeYV+&9J5$Uf70!A7p(*di2IpMap6FyR7B{Ng^U+dQ_Z7Gf)mV#3Z{ivwo9 zCSi1?O%o=bzlblB=Iu>DF3Qy|1-+4Gh<5Z6WiuCIO9#MH5u}L=?T~~jOAyJf;4bE} z?BOMt&5AJFkgxbaoHZcAt&r74uPZeTT4nv9msGdpW~Y0>V=3(KLzR3HpMLxFod^$_ zRujU}bva`qo;~)96N4l1YTFt08PQemd^p;k2o9cK{DG z_XQCndmYbN^GRUr8Xa%GkG&2Y{Or|#@b!OVSRo% zngBj`AdelaTrlErWY@9B4ndkD?lG{dxq9~VwiHG{-8?Y0HshdP)4O@Spem}Xt&V10 zV5wGJ!x_FMLB)lpn`HhlKn66R-_wx!0O_`L^}(-SSNCh#t$H12e7OPeJOpu^5#xn9 z4FC{MVV`z$`D$COO@1ZJ#;(;0$Sbmd`z`CIW0fYlB!?{GmZ^h`kkCbGVYUUY;{$Py z0D=jSdy*_?YdUjphpi7_JemS!^`q=#BUB6lxCCgO2sZ_pTahO>G+yNKg-a_~4o8n5 zmLSC-EWQc?{q}`iH8;DC^}Cd6{roURepk@hIDZ01)U`}}(HZ za)(qgQx^!JFQ`DN!Y=4DTcsKtXBRZosVu12p%yCl$jnKVfcQ(0)LozV#HqckRHD=T zG#U%d0%WQCsJX-C@0O)qSx(@F#n)aI|Dq4P8KDA@?1jt1kgd#~!`g7;JSTuZ0{)@a z9IhS1P9NxM9~v#9v}?a%$x<{M&0}K|_@4y?RCgxa)Njvx*U5gmw(h{ zH1@Np@6cn$I4e9mAJp%mU;@O&f@0C?ti(h*I*X$q)7or2<@M~Z0Vrc9louvjEh$LW z1PC)@S$H1_BBBWHecZhC@uS;c2)0z#u+or~=hnUQiK_Ok%`5 z$Ii<0BJo;h1w!nCn045)e0t$MP6ddWAXQc<*hN(=Mt&MyDhL?;?!j(rc40C-tmAC zYJjJCBAF}=C)fo=^Y$LQ$eR3W$LGkN2P%X|iE*;rg^-DzAV&!$l$4;tuhZ(4sNG=?9wDDNj$aC+~wu=5h#6DZ!{bGKgd-&%><&&9%~F zV1No)<>)m_dcdw-|03q2KL(L)WZ8p!OxF5X8FRwLh9% zEVzIhitrr=E4R3lfa^mVE94IaxbFRyc9ht86Irbq5$JEyXrG$M{yswG_q+*=JFUY!_8kcLQyspZO{N4`13oay zI3DuA(mWOe9(7&Z57k{S@G(d%bY@R}$73)InyjvJx>%FRY%om_u?(~kgx$qZ) z+2kQCxJcMpv6PS74f?KK0uio{$28}yQyNr(pbeE_=pcj2gYOVmd~i*Ys%&SV&)Qx6 z!*Yofz;k{jt`v6W&dBjImbFNRbrDPQg!&tSXC)u9dPrT>X42P9$82Pz0Ujpa+{@}G zvb4KO!ENKVGTxDPTo={hKM@U*pG6ZOWGg*42D_k#2S{EF^}@8tilAwyKyf- zPnO)fY-Q}_0H%ta6=)(;FbWYJKI_-~8qW_{0Ms#Q%8aFb>Ftd@fKEvT?CqzY zO2B!bm+8B5Z=0tfNDey@g51}jfUu;GkqEjWW}eIdtIEXme>ZL4Py&RgkR<`~hKRhy zn%1Fd=z)1<8uJ8fuoLO=WGT8y6JAjNXOkIZ7xV!M?i~Vo>jL`9!s2ghmJFE9g)u;K z(`9d)Fagh_jA@iq65~w%lE+$py?_~@q!=96%nCS2jDw5~_@Z_%{V{*bydvx!S0__H z`AEcZhLfjw-yyiUAC@5T5$blQ;m;6TjT4s|zy{INp0JBfreo^Qh~f8`NI^}OzfI(E z{D~h(AKl8m`fr_9e<{)KDhdDah5@5KJve~HZRX23j}x{Lu@{$%OUx8q-tD)MIV0MEu0^8@YxEKs1j8u2;9;$?k? zW|%OabzPjAazZ;U^nO&g$gNUlTB{s2}H z&u^^Y#lbS#yhJUgEHwp6L_!IG;Lk9_pz35jpmA z3NSPW5cPe!w(~Cn$ooDGf}bEj2<{W-Y&te>>KrF!qaLv!=45*x6~3N*FD0m*)krb4*og5d202UW1_p?XGhG50G7= z!UFGFEel-4@;$O$7OtwUsj4^w-*bRZ;aaA0XIjH3^BD!~hW)&(1KsXLU%k%o#e9Zl z#{k=Vgs?wox=Gwh{$V@SF8D@^Zz@@U6G-l)0smH!M;0xkIn8w)K2-VU>Wg-VbxV$V`3f_9iw^P7Mszwa6du@bRHEK$4pPUz2oZATCIi5G+Tv z*99y5#W}UTq94TI3@{#<~8H&$+eJI=Ma4i^b0u!?3$tFF%Nv)jO?pL*!uE6Pw2d4 z1TsNSGYdJr!>OiPzBsnP#>@|@Cwpv11~6Vtit@Zq5RWo|G!O)^f-U()nzvt^Jp5?h z?OGjROE|Pti?N>&x9yGI4~;bvA&fw1zeI0Y^>n@%Qr%=__H}e?h!&_ z05eAtU9eZXpZOMu*x7)H-ZAko_0&_JnF8+UWcxwQ1bKI_=?CaBoP6pN{Z&+&S8H6gbkel{?U);oJ0CcU39(UV@i&kN zbyK{BxC0fQp5{FYL$D?vq@Duxe)(K|iubT#fYf5MLa~qo;sqe-j4fdQJ=}lS=HTd> zcejjwfY_!a8{jqB4c#!>Ejt<`iI6Y`gs!e2_a_Idol>|y)wClQNLBcN*^p%`dg#XS zzq>zxd|QrLeSAIhNKqLdas0f$L|zmYx7B$>8$u({N&O#QHb-V9;J_bA;y{8p(-|D=l8Ao6Ekc*rAK7F6HoLJzG3 zL*W+dk|zXSU`Rt2Qc5S@Z%^vI6ASXK5{yxF<&KhKG7db{;*#AE`2F|f>#FW zkdg4|jn92Hg`L3a6VSGftt!IDmsBL0jPJavkrsR)&M@vF4=wdZa zO_)t|(q-Xrvn z9)=+vA#N8Ay-7F=-qt(XUd63K_b5naW-}J2ZefdTe5-|MYr`P-?%Vu+DK~w#6o}tM zK73B{`t!Cc3v&A11KG?vXFExkradt7jEEU}f6Yz1!!*NBi)567ZT=WxkPPpTm1CI1O3{MXR`qQL);DKPKfZT869-2~)PMN-kFR&$=L(}ab?-Bh0@x%#JW4%>e}La3eRV2tQ?gb5iEPyKu8*-B zA561+jnQWRDXv}FDJ%K*N8BE$%@QGVYB2h(1v@&L<*W{%6ZM18o^t;l?wDo}-2jdp zh!A8SisjGB+-c8f&)CU+dc)QjS}dpZ+e;4ZyYzZT8=F`DzNI3x zw2+*K8z+^Vx?5~OAeU}Y<$ln`M336cQ@oe|tjt?DclR(tIUIx!kS@`kq*BZL1~4g! zd8g|7)%nG=ZT!uJQU*lYSv-OJ*rexHU>91iJFW$Jf-S|W^qV=C>}BXA>%u~8;QULb zi(pOQD2o4hMWRQ-)>fz5mRDES!g(efKjc@Pzb0DF5d5BG&gW;l<;`T0P;?5ZXVvo% z6CMtS9lGI%w(bE?NRyy!SW&{q9>$6J&4jawNx+#6pMrd-DnHMtNu>{J$a zMdpEw6ULufnfL}+znDo@j&{`5V{r?1bl?=>q&ZgIYgE=ND~-ju0Ap~oa(PTeKPDNe)oE^Qrc>z=t#LMJJ38YOn^v0CALB_N(TZD1=gEnI_j{1u78H)VyeBh_-{ z*dvm|I3=^=@@+E~D?kbdKTrXoE?K5JS;e2?iDQ$Ta8l{IEhcJcbYBPG8ddvkbNPK4 z99{v8orx=;I*nye0#3YOz{sH6_#lnDRU~hj?UQGxNmDqV3N&E_{jj0&&vEB zS3*y}v#k+(_hw`;`h>k(+#T3R2?`McNXbKom!=$ch!*mL33WA`=g5s4_b@Dsan}e9 z8u?^!Bh`uTUiI=P#RZ=_#V%M9YH-K+VF?`%(l=xa~9t>GZU&@#S0{P!ae{3%cuT79vN;BuktswFZ*(A#$&}7dYiQ? zhovG>Ub>F^_UYeai!LVdS3Q31YH~UxSa5SA7qo!%t%*7x-Rb7*FpKJ{D8`Oq^hM3*qI__T5G$YQFBm;L{ zo^5*U9FVki@d<_^sT+?4Fo}Sw^xMtcZ03NDe1<=4Hl~b|lsK&DyM9(%%fl%dOdgxu z<0X*41Q?U*t{qk1*gyJ+peQg6FKjR9?QA6j65%M;oA^@i?`dLbMIK$*j) zGO;1)l1tp~(%!FkMK(L*M2JV`E4V71_aO7s|0?k3 zq1B5;x1YfSoHXIp%ud<#Vs>IBdV&BC??TSoDH(C}lyI?p+E0B$ADivM2s|c33bu32 zpk-u&mikqUS3-jn++dS;q6DZkk;TL(D$dQV0r=$c!hlz~?8~!}@Vl{Zx}tyj zflw>-I66Il20JA`+=^~V*ZZtlmLyS;Gv;=GIyQiokP;OBk93GHV6J4xy|%<#kNI%{ zm8DArr{m8&>eyMi`HX`%!O3jlfp+WKqN ze2(M;5CNrMt0xb4eNK1(*+tir9qNEI;|Ub=jC&%>^);5BPh3NcB6Kr-Pql)brpe

(~|!;CTHVX!nei6uLojQ6vWh`sEPF0qmj$$OyXuW!tBA zN{4V&pja+XE7RlsYm>oe0MV>ALy`$QORiPmT1Y6DvYpbilOayB@G0In2+PF4fNKJr zK6aLc)`PHuYlxzl5gIOEyb9DD%k8N2V!`34s)6ziUh7RW&w!Hvn7|r*4+vWtwLDJT zI(t3bRTbk8kc1UlHp?kD1N*1d@brM%99S!Sy7POEK8y;C~ALw@>H@%*uRUED~+3C zXEBE2bdA1Z8-VKYwr>}R64K+BO5F;NPbYAn>-8wQO^NqQ?k7$8k&J4qQDW^XNht@p zP7F9V7==|VhOot%@qNPb$5O9Qi2e)4xc#L^A7m?m^Wttgpu?x7+B$xJsY1YOiz@?9 za4IVmOF)pU&z;j9r*zW!6a%Y7S@-lWOk5AJs_LrKU^uQ_wX`b*C__s+GB+~-5~u-!I%&YsHbNpgezUS=dW=-WN|?BWsAwL- z9gtU5j3WTxUCKdRR9`(`3M&xoY_3L~eMW_qD0d0^TW(;J!KAzRo3ku;Vj;*kK11O# zyq6zJieC%=zu0@rxTwEqUl^nt8Ih0_89D{&mhKuD8i652x)CHqP`Xo6VulVWm7!aP zl9Uc9Q2`M}@5cW*=bn3?b3f-k_kQlX^M?5S_Fj9f?_Ran-h1Ybs87szRQobvF7}$( zHAQezMr(nOE;nXi^nQq}=r0YIU9dkR<+4D`}QHw`PQ)t;>YT;dMrY zSrepM;g!OoX~u+TJtb*T!Nti892{_9r1ln?9K5B~3a81mGgLx(i~0tnO&{MRGt+<2 zt&dY@D_X~2zhNXF-B7Ty|Iu}_npeG1IJ4WhGNWHNZ|HPA=$-*`aJUT}>m;-X z_r1U`D6bB){$AD_wJvbUcpXHs+du|{x$r#$rS&&NWIFdBcK^mUt&N#?H|mKx1ARrQ zyXU{hSqWUDx41umjSb<)1NeiFrsPlCGf>*Mo~_1YC;iDY#JEQpUD-1}#HMOK#k23t zgW|}xQ-S^2T`j%PPqltx*PuSw(5@zb&8O;Q^kl;3!V`ru#E_kUwQKQ*XbKi%${u|z7k59J5X1b66X1lNK9qzlu>j~}^ABr2Aml`FI< zDLTXJ!o(Eyd8D9ugwQS{L)L&w+dmnkve=7YFTEFsgXNbe#vNCy6`W?NwAbu6U~Oe` zE5mpF_z*M_5x<^K1ZA0Hs<@^o_@mVkVELCwD*eHz-fQ{FAOK9>vu@lkETn{u1er%F zT~QF=2bxIIQep<=Uboo0F*2!>y{U7K5c^0)LfG~yZ9dAVBuDOJ1Q8i%7bmJ#_Vian zn!qPMIzN}Wyl1MB5H2C~Sr?Tp(pt!pC*xlU`WX`@5SWh`+n(%8^#MdV5e>2zivBSR zxbI@-C1s9?2uZunz~a!zJK#lt-dl5BDdKqiOnqv~S(WCL@GkeL8ca5&++Cxw4qL@U zu!cBa!*m#pe&lIjFA*R%RI1XiZi>lXCR{EOWR;u-SEaH9Ikzg;=6cx7g@cMpVM{t> zac1>zW9T3{KAm*8Qq3xpQV`9pDO};#;KPQ9c9|o%91&D?aP^-xG?ecCYKhi_za9+ra?+HljD+fM=8mSB_e zy}8oKG-bAbPgF~(h^dw!vZ+cSO{+Sq%@%R{t&AkZMKbLg#H$h;l4Ix)QKdBWR^|Lg zo9!7hvrrLV5q>?gFJjt;nQpQiUrto;`br)*Xv?|~f9&|{3-EG`MfViU??j1>>R$KB zM}id6D7nt}v6dBQ-?fPAw!u#(bMe4LQbCMNo`0Ga3RN0%6R7uvMD+NO`PK0K4J zp5rOcro76Z6Vz#l)_SH?l8+PRrdO8)Yp*}yqqFpSMWhf5MoW-bit?#$y^pK4o8p#S z*lyVb|5(WOf$*IW@v>M%sAg9ked+j+{MS8lW&bkD};L0@) zk=^tuEz^$cAIn{pwRU45TE|!J7{}(%HbiyMVk#$Df#KOqoX&llkJaYmLTDuQb3>*5 zmEqTe`cPbKRur{Rk?Rd;R6eSqBsd-IlvHum*&~f81Akwox!o1`my}0oN?L;St=MQy zvdS&D1M(TIlHtP$zDT5k2#by4 zXM1fz|8E+Vb;CC2f)FX`-}b^dkS{X-v_MN@-TKJ$K=Ji~5E?qcA_iuQvB5#{JaD3% zv;}M=JRy1Q>8D^$KKO1APYIsos`bZO zgc{Kg={BuhL;^gWFH0hol8IFCDKLe*Th}2$N{C<&OT~%gmBL+I~YGJ)mYtJ%>Rqze@?uQ;1W7CsrR}wMF@y|uy2J2&1Xcj0i zZKQBfyV1R%V0uJTOzu%BP8pMx6o;QBNErlCq&ol&N;cR%&7Y=G+$+Ly66CykI{I!P z3e=Hoo(->3lNM05VC9k*qB%iYmWB1SleCDc0ILNw6}hTSg|o6NRovGIpTHKO{kyTy zMfsa?r2_p#3gmw_*J!)toK#|`!~6|h5;;C zfciD)e^hJh!v4jKWm8N4AMPLA75qOeKHe4kzrX2nSLi?4KM<9;`@h~lAb3>xABp>4 z&;AR6{~Uo;v0u;r7xnnRTKRuckN*!%;{QQCUPMGf=2qUT5hc0UcKb6^6r!Ov<;zLr$N3cDMgCcV>I?l8`$DY7Yw5B=V2C{jX^S2;C4J zWB~oX`!yEJePHi>O za|KFpvEuoAJ_;R(evb_!<30KsQT$szc8GSr? z3#vvp*?Ap;P;ypW;Cw~jX$}eHPlB&+!d7_$TsnUbTaCD#Bjqg>RNSoRDc$z z^Kq^XpOPs!HfwbP-6ZKYi(J9;|J!^>sF{EQqCuh<@RQjcrA;`Z=&^RV9PNS>yh!de zaEpI1%Zd^uBoFDl9@;vTR0E3ZTnNY{xox$A$Ldu4Zcii0^Q&jM;lqSZ7jt<^>;%6Tq%*sf26OvKI zqILd@tF;bATrVqa#7Uk~!u+16+eOjW-t=Zv8Midi@lL*SjOr6`<;63Hju;XxaVGM!$~N> zE#vQGRzE^dd(-w_2fp(ZaLs1Q&&JN4lRU9I>fNI|!qRQWrQM+^A*3l;f>cPN8FE$x z;Yep4FF_cGP4}p{Hs{m0BBfUU*lZBO`Eu&@n}wW3h3`XdQv6nL9jdE1{?TUmEOIjy zjP$}1dPA`w5G^u5_y=ca26Mf|3|kqm(mEFd)S?4 zH40MJYQ+tLz+!S6^5X)Z0!{Chyw@@=EE3$u()I4o?~Z$G7;r?af9sbtlp%g5YKH6F zZQrW^YTKQDoUON9ndPR{9fd5UyX6}H;D?cB0hC%Ys+mYXDoN-SH0?V_@1GeA#b@RE zfvB&8g}c;3wu&N9w}Ob;LwFzPWkKe~rqpP{8=n*(p8RHv15?g#&lY(btjgvma+6k4 z4JA)<;z=bTRM!P!dt+_Qbd(mR=CRUJt*P%NfE%^r(a^f1DdOxDER5FLf{2~KmQZ@{NC zsCC}(>Opt^FSXPO5+qR-XJrcOw3eEVN;!RnyJb(5)w!0QiaI@HkKW#-CS4N;>a(h? z^P02rEsOn@{8FL8-6z38iS{u>!<_1Nik6XwNVrfD1u-N>87~6Voh*)Zaj(Wxd?hXDL8T5j82?$M;UKBxj>F z(u}59_=xLe^m65$cjGa*s%fP{3PlPFtaU65UBAg~k^F8sg%u>#*7&_qZ#u8%QM1oH zjpl<8%aLTcfD>=L&?d>KyL%BX3SGDy#1JF>6!F1AF?2aL)JN$JeHzCAqkhV3ez!lR z;`9M?7*->iD0{Ez+|?;8NW1L;rI|?yZONTJ$5&POpCUk#ULk(mETut3K!>s`Y346f zV15C0vxr}(rwhT3aJwO7OCt$MNJt6s#fDtyJ))TWUHD32fOCk3Wm;tL_bZI<4`Nd- zaY>D@Gk99Nk=?jTY4-E!(@1`sZYv)o`Zb4&y5-(A`Yioin`bEr6qNV&uR*iwv+Ckf z7O*20qZZvWR{THUY1I|gkgQ}EmsYEMsg>H9#uJ(Ack1TWXvhl?&GJ}0y)ggK9!|8# zsa>b44uuetD5~SMf%OQ1$e}{stw&6o`Y9K^u2l+q@)8>D`3YP(g_R^t1PCqYT*;kO zqG)o3@966gNgGjx(2*Jxi72GyR$nfDA09SDvd~lhv7MlbdKlECB%t`tDS_$&j+`uH z`t`xti6Y*^Qi=Pqcq>-n|O1d;`jq9g4-AI3fP3~qV`Y$bp z>QzAtCJRPIr|V}28ef&wkA|*8%$yb?ebdq$)EP@k2hMyyz>I?;Ewi*ZLmy6l*4U$F z7m{F#n88hExq*Y5N;HgR+o%Mlm7YLDKczoP#d40B{mZAeyRwk`rE}vMqTn3Xz_6IA ztoT{4y<+IyIH*Qd_Joi|H!g<;LCg2r#RdmpIoS-Jg|}dky^g8v*c3r@&s%aOag?@vknNm?x^XK^X7W>q!5b=(TW6#3d^aB-<&eU9GGZBvOKD3K?e&Ufeu z4)hH&*tu|`)(4=)rK!i+6Qdbhs;b4MBsRk6Ip9}VH0Tp2v3=8~&v)lc$)2V3+livv zLG>IwfB%+T!S^ftq2h~_R*f%4F61``RK7>Br*6nwR z5YjNnnb-;kx3rSqYfdrImXxk9RlG=PX9!`sOsfrlk877!DuNE}BD+EZeT%(WTMv&g zogCOrp--V|n$gmW;`kIl29H~p&jcc7q8RlJdT<9KWbG@XPO@ym5N6Ji=>9H1B5{0G*97b(Ml zcD~ltumO5$O*)hSA{*hgEY3=|Yx;!NbXGADIDLQ8Q5+C8eq{9_HlFQpi3@yNCNfsHtN7Y$7--5!dYO9JQcn(1DV_n8}M1#}MtPs0(X$ zM~x5el#x=7$EOHG2q`Z%?yW6xsw2RjCtWI$)RmVtKwQ%|a7-iDqGTW9jjgZefI*g0 zH;y>D?modPx;xtrJpT(QXILUOq#X?Q_6jN5TOGE-MIsUf3|E{&eR>?bC$8*=?PaE{ zJT1-DLpwWyvn)Xo4KTiwR-IM?b9W-@2SDT1~%L6BMf$%pRJz9y5~EqAm$CjI1F2=+LgMJ1SSvQzJ<%zu6Hc-W-NrCU;? zeJq}>1IY4H=kO#Y7@X1}(kn1R4^mTT) zmYy?+g!9u~%{peQE~YfG zMfOFpfgvNv9yx>8DrwVNH;~_tV;&0LSLXotZGGaNCWA{v-!0X%Y*cI&IZ2zzZRzOl zQMBSg_85Ut+6a?9s4?Xxo1b+!9MmJFBwtLA!qEZs!fw5N%8cY93?~8`G|O|#PRe+i z1^uA}EJcFr9?@+RH;TlO!HM6KMztjO)eXV@Rz9+NlarXZ`|92ggls!RDzqn#l+jUB zN%XzYA|v_-wX~ATJ^8fv)l=<+6pZP8pmQy?cHKl3+DT{noU3w^KKkH{}jTn6z}2=MIfxG_0}ZLBfmwp4N2-D6QKiVN($ z+8T)uM?b}$KdS(;)2!-2?v>n;ka*C|NiK{IQX+?vmOCkWNAWUv4OM)Imev@Csxr_H zDnQTqXL_Ta_<%b%O5?$M-6sb^tiwrbZ;evxJz18u3F+628&CrTipVKE^_oHZDLa%Lp5@8WuT?Py~XlrKKedTqgsb?Li!ser7xeQ zY$FnhDoH&>0rQ+v+G<4PdNlmQ8AR19QQD!;kl6Z@%Ja^O8Xn=xRWyAM6}goxh+RNY z^w$k-%8n1i?>?tq7ZIGnTZjzw$W0oiG{Lz%^VP~Cdr74Kbo7Z<ur?XE%-F*jW?{;*1Ny{94r^gf+| zFc~2wf6Po2r;?Yf&lZZmv*rc;FtwMZ@| zbw=u?v9h^zG4<^iixqM9B>HbA`q_e|Zx%}|kiplvi8z~7nfY<+#xn@UhMNJZ7J|fv zYDEv>aw+}#{`s>_xAKscwm$wRrT$kqO$6WUgcXL9`0%nkEK$(=%nf1aD4K8)Aj%Jx z^g-ONCz>E%yGXhufp%g6Qi5v^dT9z5l_SS066%K1(m=5cA%Jw9@}Ge@^9(lcAtMvZ2gaw7r)sG!A)LJ*+?7n zkH@J6$G1Ua;%oAM3m+_Nhf06{_}3E2zx^)UlAFCF_VGV1vkL$JDzl3H+Xo7XhzR~) zAJe{j_dhAK-n%FMKi658Niw!teC08)lSVflKevGt1`f|{xgpe%!A!B*wa)V-7N+k^ zPuk;pF?h#Tp%=LShQj~GAIHOQuc^_#k^M5PBDak7GTw@$Eg3_>CjSP*!%0JTS%`fi z5~N*Lj?sm5&8XCN+_-f)i1k7&h<&?jmjHJ)L8W%=;MS$Zue}wlx3q8QFI`R+MjcIl z_p8dCckOq0Y2SMDSWf@D_4+QsO&ja)TkaT#aw*I1VMCiVSZ@!;bQZhv|&h8$57y||8lj*>C|5rCJugmGxCt#78k47hgS zDqwQjR0gLDjr3J1dW*BW_ag3;u~j8=&5xYtB@xWII*KSu*{)L(q1lY{0n+3o=HPS>&X9&Yct!@rWB+>Q$^@hj=RVRW&-K)=g_i zuq$;j8kz9EwRK9ZQ&z6qb1}}T>L>V25H2u|G!?X(!O28aTimr$HYii=l8>jB;{Blh zGpgj4S2GC|)nju?HuV{s>SFt#!OeL#rWnD9&tr{Tbz|4+I<4C975Cm6p&rUWgmTOE zyAaLVR*!Q|Gh@9KFL|K6B`Io7!DV9CSQY7O$|G~F#>Axl+}&2cMZ|T#)W+cq=Uelh zRfXKO5X_qgU%VX7h@=p%KDs*o3U&0ZfRl9Y3u6=h`Kk#dJei0Gg0iWKW9nqardr_1 z5HR63M>}ga8t9P0T)Ky+tC|c;m_t@)($08HYbKqMlIA5yuZ+7;ltUxAYcnyd6NV=E zyn;&+h_)&nE>hDEs08(#&+a6G^w&M(J{}N2_0MjoOH&Oa-W}H z(yaCbH&-C9^oW=@(-CF(|`GYIS3b z_c=3`brT1#Va>OO(__Qx)Ewg*sO8J95TFF&y87=7wuYG>8Goj9fz=`&Mm9f$1=rD& zoYI5~(DTg7n2)4;=kkpOK`LiNm1f-me4-cmScu7bi)`)gM%8MgHkA*r5_xi|iDnz% z**48Id$nC`%_gYe77?DBVt9ub{)Q6FzI!;&YNpKP#QfTliDl<)4vWx6>Q0&S?y-eS z|E=5^T2vwe?=|kXjdVq9N5TvqQ4i%;)$NSk%WinNr`P7&-@=uZU{KS;%8OgaYKLFA zhiCChG7!FxV0(9XXi>ic%Jk%)#|0>#5oxOOjSXvFmb8owue_~bYT%Bb&Z|~=huyUl zao5DR1y%xEKC{_Y<7wHbm4h@oyHR))y_xCn`jdgBrABx==mR<)5|d^8T%^(2yF zv|7Y`M%66&QBOt3Q4Kr?PdW;*oP@wWm_*%bH*So0Iob|2mBUW$5I4_8l)WWWYSeJf zK%kM6yknERHaBz1;Ms`gFd~)X;@|;9{Nu84p>ZeJW_z%26vedRdLv!&n}%UDht0-K@~p4#r+=qJ$bdUN9F01;}h*?2L@yZS`L)c`P(gwWnw zM_hhcZh#{N2KiiImSF1myDX>Ek?rs>;y*-uV+(*}s`IP`ASpbSGh$m;m3!LLF^T9C zXwSrVJsH7XGWqUSUDJ_yZ=cPaZw$(bzpibws+$?B^9@YkD_|f2QcW zTVE|X_)w2*#34en@s(@F7vkO9vJahSPyc}r72HTKK!zZ11e$QZ^qW-c=tY2X!_2;# ztFNzKqwMl4IFglT1(krNztq6C%S*1F)Yoj}mTrWXSktWXi@5SDkL`J3WW2MC>xE2> zkQf014{PNumn9}?=}DJ1fd7stkDPrv{)ii16K76a#JriPtN-*Qs`b`Ao>m@OqS;+B ztSn>S7H;tEj64s%GgGE%;-DUt_vI04UT5ruY;9XU$cS5Y*jHeiy(DM;fw-gDiO^t zvv}wWfz@RG5!f-bU$rG;Z12iilxYO3#PIKqNiI>PakCVQm{)3dlK{;23&yyKVbaDW zE2OJO>tCt{fj#ccpeB1zhaar%@8NduJn3H(b6&&_rfeE-G32rSYUrh z4nO=yi<%sfp+E(0TjrczcJv?|$Q%9SGMYPt=6Fp1YSjf|zYhLrUQ&8;SPc0gd3KjL zU7{JD-Gk!4@{y8w(?l6O@04gePu>p0w$(HnKQ6t4SF$2SOiNa9Y@qS;Rf|m1s29tB z&NC4CK3Trv_Kf(*t+q>M8?Vrj^kLZJX~|PHgz}b}(%&%T0 zxBVSymP7r8eyob{pP9=5p}SHe_jFA0lk)e`@>rgG_-q{!2%bV6`_hn11W0 z^z0vv7@IXp-gEsfxPM&I`-N4rI$TA0et4x{8M zMp@GD8$$UhYE(UAp11-+*ZQ^G><7@`J*S&p8Hi=WQn%>~_VKQ&nX+|s5ujXG41Zk)$KuKHHIE-NdrYKa*9c5`BL?0)IR$1>0H)m_dtz8q*I&uwnswW2|_mw*2gKIF@5B51z2 ze{?vu03;C6Y+OBc%0M{Z6eJm&L`@>L{saITJK0U}m@viv&wDEn&m)#n`GJ3zo;n>H zw)PjefSBc+DuB39Ab&+I91f^0SHpkU5JBpY#TFePppk$_=pMk^Kcj%TLjduBr{@J7 zL`brt5m$USf=T_C2$X|2s`zij{;Si!p!#1x{1*_wEBwDOji(~}g67FyLv)>`?fzl@ zbn|2x2+ONv@822qsmrW+3k-OTedf<1B%HpXjj|aatq;X@T|~W3*J~udN+Tiv-j}>_ z*e?Nr3?zWpQt$0Q+?qyF0INU71wZ}~!}T?M(d`s0OZJauwyqVhH3#8FroY>@T1FYy z0oQ=_yA19R9N?8JiyylfgmnUH3-|W<%##rh6Ptc#pTAl;mBHWrGm~xV76jUvA1ku?(*(=RROt2fGzHf(YexU5rP! z3*17v!(6tQElcg}a+`yf-#nPsuYm<7qUOJ^7(*D```+bHebi%b+{R) zRVT8qQTgYqF~~$NUTyLau$d5SsG7x;o0ZK|2?R9s^szF7fC%fe1)`u2Gs#}%q{Git zX+F)#V95mq~-$BXjc7|rrqWZIETVJR^{;;(fq;;?Pi=w5|A*xmrM*>PAY?! zY2?mawg-cd8Dp=^Fgr z(SM&N0g+XqQA4#l!;SGO5vewVh40zSJS26QElL0y2lS*&)y%SCrp&qvVt+HK-Nu+1 z!I#@i1{SpOHG0{Gxzy5=AbE2?tzb8o?})Q8CWUuc$D0RbmBH2nyb0Qd@$r}q zfajN{paJsoDiJFI8taf_Ea}p0uh|*iIXbC-9o5e2I*)PyU{5uV#jP-*MrK zXX4GM0ZuFejXw7yW`ym1Nhe||DcOxq?W1D?BM|NSB=eSlJO-OZH{rh z4DF9Xm`ltt$O^m|`!)Mk*CI4~{T{;kWEX9!p{SW8>K~@Cm3W1*s#Y0VhUT~iYAzG~ zcUX_-_l@4d4$<6<4F&TkG3EISMA6onja>_DYoVWKN7fehVKuz=V||HPwuI4PyF}uvhR~%MNj?0q|+Kpj$JZcccuY`wn-<4 z>%QH3YqX4NKSYmKqz}RL+rD0=++8jA$@-cf_ko)lHCkhn$qLqSImR+B4;$0zTU)j? z`jEHnyKor!Sr$bdn>njpd}&cuN}x1F-SLI#{p?XC%wu8ry+y~DxD(CQ)ve}QoQ@Gq zZsQTNbo~7ntouV_RkAa22b7QPdBi;qGkBx6!xeal+vd?7 zUnCEJNF8w*35Ua}8pc(yGV~Mc(NoQ`__;^?*T6wJ9z_>#MdR$c{>Ja3s6(F_)ts8*gVx&BGiD7h^L zYKvGU&fsCL?ZgP+3aXqIC!0kJHv?&siI72HmdI7B)c_lkFHB@@<5_Xeh4Ran)fiuK z8zSRuoM#O(-9mqwcjQJP-54{F?bcX_xAP@Y#x9*^cq2kEi%z)j6fD!LY&~7*B9Pz+ z=_8|Ft?AqBl2<1J3L-P}lDr>myZ03FlQONn4S0-S!T10^mX%?@-P__CjLmAaI>~?f zI-MY~USL{%>~EGG65p&fwyYB#Io(aM;P|FgF#-#2`}$?iSSUPwaJaFzGYXFv+3Dlv$L`FYuX^T4!#N21FF&aWuOe z@_SOF4Uo@%y)Tsno&wLYrafSW?y?=Ln%|UDcx2kPD&pr8YQSJXqrq03J<{i3xMS55 z&&qUp7($0KBd-(TSub@f8%~civFpRS7_K#{JbmadbU=l|RJT5FcXoYkQFf&eao8W8 zp_H@Bc(bass>wP2zWt?J>9eZgz++uw(}`7+Y29JKW2Ikrd;fSBwxoI51fWoRw@KP+ ziYZRBUh&Jk4}tm5OkH`G0OLDaAHr`R@@UyJj_^j#G*h8o^e|g4cY!)M*0`XcDUda# z`YaoGnf;k+9p6e&L-Qd(Ov-vN_9N>bV10Owa!zi>1k9Lh?$9NgY`*5T>UxMrQ_o*H ziMnZ-L;XG@54%K!-!M5{uWB3ys{F~;@Y*h%ZfgdfQLI}8jTlV zlYkq4$#BB}YK%jDc^urw^Wa2@Y;-e1xzfFv;Z6U$oc5LOq&V;eLmw8zgW|(N)+1>sy0KAvDG2)hDGOdiC=KeorJxfitjcke`Ax8#Enzwm_uPK8(y-j<4r z+>5_^ErAXtFWpz)s?_TKZ*0~4_a-|RVVW;nXaD2ft*Z^D|NRrw|H6ow^sx8shb>9yqRT*ZJ861QODb*Bhv~FVXQ?D!HCgWa9X7IemQ9O0DAn+^y z^HMOf%GE5gYi8;$Ro-U-8;zCEOWw%fr(r+E6bV_QDF5w8Qu5fl)TdKU1P0D0ZP(kC zCY_sbz87P5lzvOc`}I%ldb5NTs7P%%pGYLhQKYj*7fIcrZdWp(XR)N0 zfuB0XK_lOG!lnH3r;lTu=-ORr9ePEbVv7q>5`V2c^z0l#!0mN)1A=u(BKt61TCPR2 zzhj+v(e~ymV_qFM?O&Azw|#BuRMCZn?^lPYX{WzXM%pqYdJ8G4rXPmS* zPKMeH<7C6``8@D^;JW_)Oqwel&4d^EbfWzC(KCt2-oS;lSnWX8b!7wYFYtkT+4pr# zFshqenEc@Agsct7Kr94RpD4n;&Tc^Ug^M6PLZMhUPxd>bj6*Biw)FPcmy+RFhykKb zKp-`R_CR0lcDb%}r^Sis*Xj59qj>{wBxF4c-gDW#+)ICEqORUs&fpfu9we*7EY{Z0 zW_;KG$j&C(vuwMy*K<8f6rJ`?wNpjow(ORTp`hAH?9_mAVw>UAZd+moLw|bCH&lF8 zr?`Z*6-QahH_qBbvf7Ex=s2 zgh`&L*N^V4q#OvLlLz7gEOKyF#ToSs2-o$EyD3OSFA_x zw*E&j=_9N`8nou$fkcIU>#tj>K0@#oZ0n?+8a0QcM!` zXvQUGAYu!s`e&1lj7U+uV0Q80krel4?#8Fx7k}`rVzSWmC8bPTy|JtRFFz)Oo%&XG z$D&B*Eh>WT&1y7(tHH-gdr2;}Bl*L$u@d6QUZ$xXGJ*G;sT^?ysBcl)Z*KT6xzw0Q zD&%8I#uys=x$F`~^$;-O=Qr;77y1ovr=<>(3I|Vw3I|#V2R5BdWAZ0bcoZF*{1}7= z8la6(C*h71iBgs}95O`*d^o;Du)U8m=3BA(YZl#y%XAN_U(@vRaj+t$P&+G_jc4ICpVWSDWz*| zfr}vV{%zVQEaEfyf{?G%Bl&uMoszazecM^$*`f;B(Ihndx7nZc#It+hON8DI?p~@& zBd|lZ9L;5(KkzL;Y2{N&)=NMW;2R;%`Zswr)yC>mn+^S#vK4e*4i-?#qz`?w*C|lV zlXhse!x=Fk_%=K(l!p zo#lX;@OFB1LUv^D6N%>{P8nIkXGEFYj8}c|6MI?WipaXs%=pC)mxy`DAde zp*y5@*wEWwaX$Hp=;LdDN3~mjb}y+v4ZUMg|DZ289d!q9h>bZp>FlTRrOb2dfJMs*Z-{WO8)g$;uTx7THw63<4C90Du>N<;xH&rF3 zdI=@}K;(e0j^%ujCG(7Fly9)aj${$0yjB05FkiZ?BQ>4zmZ_}ID8sYJR?pck+MgBs zA8J3pn3MmPu4PoQ3WO{e)x$3sJ3Ahv^r_Fz{0@rK(ZO+e8v1akLNd!lvr_^(PCu4; zs*n+XJy%U(eTtO3`h&FD#);?IGigqlg{)k`=Jnyob_OQbvbJxZum9$9YI*6nr>5`c z;CPbdIXABFCs?;VuB6`I>GBOIP=@HO2;N+_mZXT@ayp|08@f$Esi~RYUBN-+YoVZ> zi*_Ch%_uCexSiq6;09Cd?}5t@nalU>c4AVT!<9JjnflESaYt6$kn1kt8OkKsh)I)41o5Ie+q9(#^j5P}+2DGgf8NZ< zy9-M@)CV8Y86T}2Y-ZKg6+107XwDpnyLPzajo@KrSvynm&9eBi0 zDQ%W{#Yy5Yf995QK~U>PTtfzOFDd+7h(Zxt!V6RKcF60TK6-~>)4@g>` zv~DWcwhV9Vd&w+&l1OHtP@J0c3fd}rh5Mc5+5@lBD@uT+H%dLA;8F|8$yT^2e>-uZ zqvZU3LGfly zFvB~AM_&Kh{r+q3G{(||%EmEa$Je7=BlH}auXk9u)WkK)Qyh{;YnL-*7PXkPnX=6e zAJR*EJHF3iD$ugg_BWA^EQp!y$yeqxNUJ{Zaj%=MpGY25ST!BrO#8%&H>7Sa(PTZT z%0aVPznR?KY4$2(+To#ey#GKVDx>dVP$QdzV~f&6E;uxXI@{!>;-K>o(t9ov^Qunej94wCOzJ(520FT`{$*Xa0<2AirVcW5gms4oUL>ETCn5pO*kZ*HkEX2WLs zBy@-kESa+{l7YU9J(m)0qW`3G#xh;iFrDA`@NglmzVOjPv9g4L>MLWY&aWZeq=-#v zFF+@56Vu-5Fooa2Jl$O)CT$kby`k6sE$Pcd+te;j7$sf7Q5201kM+monB5>Gudk!} zPlM%&=A+#Rrb;%xHpRTu(ru$%ws?sY)ek;=(ypOvm|O=wY12s_tF<93sWK@FBA=L2 z;mM_J=|RR&mbK-fX@w7!+~ZsZNqZNjTS9>mQf2|WPmkY?oYp3+?H+QzPS3UPHPz&J;+m;Xk-s2(s$y z`{V1gXXK$6OXldk=hnu{63OOcKh+c-_}_oo(b{PDv*mlf)aN%HFOHIALGDgBbTpbJ zs%o|3Y`L)Z&L*`jwQ_3F{LO*L#ipw43{RpAxo9Bw5`4#c72ag?I}d($cf5ymnYEHs z*T4IZ%?9}RfDSgf!r~QTQU3$YqKk`!$LiO72i`mix<9P*7v|KzFsp4ztbdf6dG262 zDc135Ufh3s{Hs9z_R<%De8itzvgJTZI=Z7M=372;7Y?=U@AG6#YVa4kXINA+-tH#w zjl2uT?BC;saQxnMR8#O`k_feT`|&}r&iT{+ku7F&1f3B*_S?K~V@WrxPfkKydZ~W8 z(uX7D>tll?(_&(O-oRb*HlCh^{PWD*)r6l#!^aD&D2Z>SM@<911Mft3XOhW~ih0LF z?^7arsT?lyjtxn^o|_Qxki1`4Ci(R`?zB(gXWQ`3#-AiykOVXS>62|OA!#>JHS>xV zUrT+-h8N2|e3IOMu!Rw2L~lIGP%V~Pi1&t1?WQvS*c4Xl_~zlmaq+~$+J7@9xAbT? z_vrTsT+06tgSU)i(=ON5)Cn8U{Og7m!dMdLHZ}nnrIAOUU;zg^x$Eq2)*Zd}cXfgX zyrvn0106d$A5|&OgN~|f<$v79GryIxNF+A>k!PwO7%K4%{9IsZ7CRY|h1V`l%_J{tusN=VjAv^8j|3*$4e)Eu+4_#et}C+3>PdzLRGwkIY$ZYA<1xOK7Dyni{kumjC7 zQT5}A&m*Dnej9TCf9&z|*M!+SzvfQK3b~cdmroOFE~bvQ+BdAk)5$`|+Q)hQ+#Uq_ z+P|J0YzyGp85#KZe6?0mN0fUn)4P4rJZ+wuzgteh?9b~*&Mcf$L*JUuz^r{QTKdQC+1$0rgoLxmvG$6Me4y*Zk z2J^LN)0z)=dxd?c^G29I6<$n-v?;nI1eV@C*hu6@%0Lr!_@=jTepd56s(L4tE|(-V zy8=9K6JN9D*4S)XhrQf~Scgis4dU#Q$l=&;c$E@5%#7B|Bb)6$m=x9Wn|ogVnax{c z0KcY(o@d1G=Z0Sn@vShvSyotf{#>WI#n)2EoOEfykwL~wXF>~;tjH6$PRZFg!F)N5 z)v6iEbaVSOozfoCHG9J6*Sv&z+bgHR3_U93^8Xn-69z+$JB%@CGSqJ)pVg{^-0ntX z$i?95@@;~Ta|Ca8aMb-+6P*qVobIp1%Z z@da-O?NZn(i^{AzkCdM3cDh4?%DCvat>E_*r7UZlV#aT zpZ_Qhp!-OF*FEAlF8(YpQYxtOSCJ){RXh9qp5BHh?0bVvlXMP%!efxsW~c#eU{4(Z ztCDV@3olySOr)6?W*Tl5L|@SNPY*%*;{!GSG_FgwMOI1I1}4uizA^I4l#=!1x9oqq zHJ$9t9{Wv6C;Jw#%-F|CC&@!wo9LG4%IH;z(60ft9qaW-5NMz0?2Iv49hn|D&3l5; zQ+j_0m5*wJr0%|)28ixnU!As+S0y4_Ead!q89wWr^~wI}uAF83&f=49$=&fBZO6gu z*K{E6Yi~AG(OzJ`nbj6^%rKAi@8+q4{m_s3 z9*q_SQeKq|{J<|Cd*e;f=-RYAn z?N{PN8M08mi=dZ3htTiR_7Y$YfmzLWElAtvJR$q$xh4Z16i*5 zN_%A)`tC&7f;Gj_w5pj|MohDmnIHFZZ2FIAFrA#A$+_Pjdvb)RKUlZFOo;02wDWZw zA*hh@s|?v|x&=3R>*1ig8QCrGVf4?~K#>?E%rhmFjfBoJ0xI~NtB=ojRdlrituS0UY6b^msm8*cIV8^H=b413y1>iL8^e( zfYspKj@0r>yw3uUX36TFr#+-+cZ|_4U4!2Od1<5Y8+!`^3Cw+Wd4%h({P7+*N7ymi zlhfdHb1zgq8u1HD@pyQ|whQSpwfTXcSa%h6nS%U~>G)d`5O(=3$;NYJ)^g*wg?^3F z`z&#ks4xzf?&|@N)Xm*>%cEgv$-w!=f-HQgW&{=8|1*epB@i;HH&J_wAq|-!&D!5u zuFT3NY)oF7QACM{%CQ$}K0G%542tS_bi4i6-N&`cRh^CEpG#8SbaiXqh6w+aLmO>< z=>xZ}@Us~?5fl}~81XE>N4yweo_AU6Lb>;1{_7DmZ(nx~(qeK<*08SLno@d0#h5f1 z;Ar4qs0l+YKszUggdD-rwNue~@~H01X=-dqN_ozXU@EUdnfuu5buyyv<);cE!=BxT zjE?*z0VXr9NY@EEIfP(am+xXYf}1ns?H!8%8lQ=q8^tboSS<9SIl=1k$vM;ti$x%9 zVM3E?Jz%mOhH4z-*rz|uc;lzym`)FlvtloL}Wp+=KdjGx#h$(&!6^RILlrL{gqLs0sbV1<7lyzU z_K$i_A@z`o(&(v{ITM}w^|=wNcl+_Q3R=>b+Ylw$H|47JJ{bG6tg-O2XI| zqZmPRLWP@TY6Q{tUMIYN7Pa3-nmE%Zp9opm-A5H9eA8vDHLhiTislV^*(;yZyP9#K zc|{anI;H`cw#iXTCD3f%Jdi`rwcps=}tt?_YN$|ss#QnV7XeTen)6Q z-G^qk*TI^g!|^u2aJGE@)%vC3MVGw`j6ll?h%kCQ=%(pBg(H&78#$jFH&4dC*JjyX z{aEh1oWF&DH44-!N3BfwH$qXuQo_P0h3ZV5Hj&@L37)ooKY;bfilp5)m4CawGu4Z) z-Qbn;TUJ1=+*){*+isGj6L*%%n&7v%&f15~_AyD=RE&~jItp2AE#J2rt_`!l5RB7I zlV{J=j$HpfaAo`4@Z_SWZNu%T+1^i%VP3;*ecC_RsbS|rUrsJA>&{O$_Xn2Vnrw8b zr<4X4P-dySCS>}1$dr{seI&HRLKCT5AZlS3-rlY~0BYsJ#gGZN#62uwc%Zxdy0 zSU7ibzHV~b4Zqr&8yO6BCD(;@Ya}EKf4^g2iS=Vl;;=$U~47x$~$c=;gfr zTCC1VVRl)zEF4rg!&a##Q>XU8nb^N_PXw>8yFImFX_o(zqpk1nfif{3 z?CPM7baj5UYM08w70CyG$QklVYNTCgbcPy6Pxr{?MY$S?;0)KpGTXy>#~B~6+hmyC4DH;U3asw#r!PnZ^bq16<;f`w{a0INK9 z0{UUR@N?D3OUo7D*urq0g5uZ7PY3{OL&4XN#F93!z0w!TbbeUGt>2YdXpa}xc$D;- z^Rgy^*73X_{uIe_1+jlUEUzlU-wM@t;;>1!v22=F8H6~GVHN*2vzx>yX7;IPkg+n$ zmzv@7STbrUbS){1R`Rxf>lP*a3BIo8P?+#Y%SL7m`s_Ywz@^<}utnKlFYc{IjUQTT zaNNxb4Ecf|Sgq_A+Famd^2EY~ziLeK8e>YBw!S7H9)C4HeIwSq;MeAP`+m-qPeem- z%Yc~1yv5c!l#y@5uN$(NVLi}_ov);69Yfv-^2p)IswKtoyg@p75>_Y0t-9-XkewL0 z=G+v?4wo_RMVC9^OecOY&Ly3Dc%ULEe=SdL!Tv``_v`ii-YP!0kZ;`9ee5vGdGmV5;fWbRC9v~!eoT{J>xXw$TD^A5vO2ca;od1Y7V zO$alkh`T+4`mE}`JxOeemrt)Z6yohG_?9IM|8P@-2c}}h*FmaAK zTzuM?Y57d^^On4BCFcDpPD*fwjlEu$j(@^J(Bk@BkLZj!LuI{~?yt<#p+WRa4VHSs zx#+u0+IBP*7gyu7(Se5x>(f?|lLN+vr7WwDSr8g9S;++PzR$Vmw3~$o=383h()IG% zE+XVw1RinsBozno*-I7@1GIU9>n8(v(G_mwULi6hZ4)A#av?NR>*p!q{gS_!6YMy< zfH<2eIMXz&mQr>2F%k9gh@Ry`(Y?(t?`_OuueP0KNS4zRrmuV#tuwLKs!oa6?D#Ak zjC~26A16y&jn2i_^Cio6Yaiioe0CgJmZQ7=sFpj!bQJrhLRxq?pM$cw12eF%?h@-9 zq6VF-fNU=6MyM%28s_sL!9x!PoC!L%6&$Al3&}fIdU<8x4WgnO`(|maH#vV%*^O*7 zDaAP2=>#v6BNax2rp5Ob(Ru}anE_l${9;|1_f!f3`U{|0S|@t+$YbwNeR8F}HkJjX zDr|ny>lzoU?gX7B2hFF#54*?}#|WL)LvCd6=Hl1p-JL|2w5ui~_l!jHIQP_3PG9wY zLi}>FL2uf1T5#c6|5(*~TrRiar^%#hWztg_RFR^(v zh1pB64%svs`jN=@pwZJO7tS)pnwaC&+5L|LEJpp?i<*ihPQ72ADwQ>842HPxjsiRR zYzAL~ZVSbZ*O-U3qT6QV)8=B1gSh(34gB(CjaN5}U5*IZ9Q$xgSoPrCbu&xZb)uwNJ<(XR6|0C6|^8L2)ZL z;Hmg$lS%T1vrz`Elwf$(O5ka8L~jF=_3%WhoNZ%Ej>jS9v@sX@%7aS^o@ktMZQ$@oox9~Pkk#Ehn?&)@9 z`zjncJuA+-a)!}6$$FF~jBkfPXzp~dv!dhMuJob0Jf94h+iJi2dL5#Yrc+mbOL^Lr13$*Q}&iZVbJ>rMmbG94B4oR!Hd=@E4^bLDj_QVEmm z3!@lyMEv!>Go8XiEI&n~U>azPGq;3_z_u);%b9fJ@Uez~X_*s2;=x~fFkXicEj8sO zD}NQ7Xgrs;6i=QjTo(EA+h>zDkHf88%?($hF zcxW(Fk`1_t72J;leW^#^y*4APH{j)6YRd2X;tW>OwIxRnMNV<97rbYbu$F{zkwg^8 zP=ZDMr#LL+@ zlFBlN1vTNCbFaf^9WtGIWxO=_HMoN{Q5Q5#$BGg(`*2!?THCjsGq3kqbPE@7?&K%{8V*_!*yVE?N<=>`z6hO<{#&VC;kA*2_SXUuE9(B#AA*t1QiY8B1 z@9BJH*%dojsjsYW?R@5MktcH?jkgc3Gk?64Ihq+e_zd|zaAG&nt)Pu&A)Y|pc%-dS z6QiB3b3~NyFLo}Tbp5}xc4le<7B-XvoP*lBt9oty>o}y%3ZiIN*BkuSpKxqn0;>Jq zyooskR=*jNT<>u4)?h(Auh!um|}rly+* zDL9n-Ly=!R2flFS5|*(5Tpw@&1MInkOStiUy&()H^XeDV9wW2F$$R7HnVC+rB=pFW&P3(B}@ja|Fv*Ws~1=)sClLh)LeN0@R5`YI26#vsC0-GOcHRz>kAi=OLOrZ-2B8iVOLHG-jx%PZBK*{%m&O}?8Yi7 z&Jy5w_t-FW40@*luFUiClHd!p*ZrRI{!W{ULh~yqT1mp1RzilhsmlZHQ}mZVT$$6a zHjA0@gmi^W_wom4vIfWmJFv^bd%ihdDy_r*QV*al#-DV5yU=N4a$kqf;naV6K3$d1 zGAv+{&};4vP1cyJ<*t?`N_uO0 zvI?(LH`bqvQ6C+4=45kpZN7r@_lTD`E_DjD+gY0`fxy2 zkw&TALh=$cQL<9lF~Z>pU7zlGAXewzh(1W_+%Ik;NmIZ{paLQ5*hX z3`<(QNBmaU`6p#fxIBw#V)dU}W-`zhFuCC3%31zLL8S|dVV5_XK({SEKYh~hq{W%D zT-jCUpTp4~j!wJ2GGD%j6ro)b9(4h!SQL!(=F!t9Lt~R~+@ZJ|-@izcJD#4~S9(?O z1$gdMeb7$%sT`JVYees+B0A>kpRxM2f6Y`6y?OT+cl#<#jS!=Gg#)iN*?G;Rzx_cP zpDQqqm>YR^EddjY6OPl13dQTwlVZVLfgYZbfy}L3NnA(Uh480sGR-Cp9%Wf)XX=$- z&AZwXz=CiNSURDxGt=u7d71t~PcO&%teM=m*ojX~KZV^%P5~e_18*XCH%1Swea7uX zc4(Qz2hx<6WvZs-*3pFPLC>Wrk{xu_gW zx8M*RRG>-p9;XbOWk%GQtKJPfeU%@8ojO`cWkHe!Ch^y^XVJaKAtJx-FD-#KJEOV8 z&mf&W-I#67BLZlju$emQ{E^Q%HLeIo?(y;`(GnjF=%Z-uFPnwuJU0*OEU*V`qJKfR zi1`xWSB%KmQ`Ed4GnFK!)KD|wSRzd6$0l)rP@Kv~>?@8lVzJ@2S5U%&AUOP5k#;lZ zgb_OBs0v-MBfDUrH{M&68%qE+#sL(eAll- zSc{v;|32qk<$ua~zwRICD{tl&;`@eF;`R)1^@s44fx&V%l@IZ;9m-&imK{zYKo$Yib`^d>h_}Y#ZC0})O@ppBTH*)jy2=)|Jx}f%7)8Hc$jSUYe z9)GZQZ||XciMEmQnCtUU^Fk)Qo9x#1TFG^?!h4=JRl1+jTU)m)4s$)wT7y)OyPUk6 zM3btHbwDKUpaXGaH;Q-owZuHQ1L9hw(mgi5GifT!0-U?X(rmSlqJwps5)w0& zu%Ciwn0q9Xs>t^Ba9Tf87`SLq~e6 z-@N`|mrCof5HvBu+>OP>8Q9A9w%=U)Dqlhnh8RFD-Zja6`E(SdmyF$VY;?Fj@eGo^ za^jucs>!<*-kW>@xc|PlRe@^%pWJY`p!~mq-}T#E{%?Bq;su5O>jzq?M^k5O!tM_Y z`fyZ>b3T*lu5S2cOb?zf(t0I&)Y?aE`~OmLujc)!_OIWGFfoCt`g!awx5y zyu72yzn4OYVm?UsqL4U##^?~D`VY8cs?L~yuS=y-rVRIin}yQ=QcLGQun zaeQo%&Hl|pYo5*xZ3VL5q-siFtW2}~Pez<-VQHTm>(Jz+;zr5&v;*eGrPh!J6Z;iVBnt~`Cwp^)6C`E~25 zl~02m#`5;~X8uu}S8-kC&0mMV<{C;&g_RrR>MYIp2j;_ z(pV^YH(uS1Sb|zZs(rX%7^PcVz9UxP9m^C~)= z`Qt!ngF_;L%n??V@BVa+g;G$w{)*1gbhkMQn~LcA25wAd1UylF18X@vc_XrgxqHqD zcO5~LV8-RcQaH)}2brI2;_OOl0TyE9Fs=$_HM@vvvaLJgDmGUqXN!vntj%{y$*@#+ zNI{V83(0GT6AAUsTXRzEcHF2VR#tO1#0Pkc6RFs8M|roe$rdAAK?@{xf!pdQ@VVcL z?Qo6ygeb|oK9NUp@>V3B&&dE5)Md$Kn%0CXFj6Se2C&BD$OEO9YvY+qMxNOCf5e|}4)>vi5-`H8pAPMLHaJJlX=qO@ zbpt*XCwxw}8S`yP#j@qFT|t%O{Xi^@JN3d*toLf2X9qtg%(xi5rF($!*8RXOx8)pD z1oGCGWlz|rw{gB@bqIhGxrUi0+mujDafyTrK9qrImrse7VQbE)mSQ~F>DA98Uvrxu zTc+Xy$E8Gk)X8*}k9eBXD%5(bic4bZ%+@!lWL(6!lm}oNUBHz|TdRXE^rp*SG!YqIY^m#QskY4KipzzgCE==9V8#SF+2MDGKD!f`RlkkPj$F$H zcWP7JN#2x2a$J`(e#oiwct0W64l*{5t!@LvAvz_ZJJQvqOvf6+4MPxM?^rKAOA1sq zwl&G6Y_2x9tT)za?Sn?I*EtQ9IQ?lof?U$QdwXOHCt*v?g$-@LbhjVJ$Nz~_wGKZ# zyev18?6V5MT9yi2`1tquB=;2bYxAa;lu#iC-RmMEqU=tdWj294xA-OxZX$pd0uqvTZ#88ChZm@s02C=Sdp;pYI<%$LB>cug+J& zZ2=^Y!zX;>bNqR3%F+l^O&l!{>yGn}xJm5to5080>lOV`SCxu$e|VFaFW^P#xJ4Oy z+I$||H9kny$S2TDakulx0f0V58^hE7L~P*>h@TdzQd!o(Fn!f0((w84x%YTqqQmVM zmfUzUr%ob4)s_meQMF?EQBu!<9r#}+`sou7gm_UnjD0BIukCahqDzlbvhUrN?}d@b z%{2GOf017de?z}S0e^*3>~0_YqKcmK2c;$lt~x?hMF3`)zdrG@7thxRD$)S%^}qas zS_`k|rK+;=p^!u!;%j)&e|hw64gB2?S~=XrF>zuT-)KXKvcFruAZ>*rMmg?FR;nP< z+z+l95i2}-zV@m}cYBr9Wo#|4*<@Ho54=?cmUL{YG2df(u`U7u3RfM(=lT%jOmsB1C9V_*x%$Is~wK+Kgn*{K(%@jlzFgB#8H*Ejf&X7AvqsQBu zvcy1Mja&d-sTxSNCzc>!y9&S*-KCwb4pmyF6EJ{~Rg5wvvWlD&9^>=jpe$WDpijmU z;=zb3F8?87Himc9y7+d%A?#qTS4X&B*-!2xJ6%3i@ir6gWDzgzlBP(~4VjT=?pQx| z3OjtJ*@nSy3bPnWO_8c8IOM~!K+uR7iWAu}cL~BI4hm ztM;2=W~GLpC#p(=zB=#pbaAXM99X!7+VbP~z(bus+5f81jxbiY2}T1<6{p4U5R^U` z&hf|;ZONkq@ZPC_zC^bh#^Z7}fnh+GuS~x2(#J1FW9La2jqB z-{)ie36QYPlE$O#i&(nAali0)Hbhk% zd=9{_KDcW~srr%Hrf7*s`!d)&vnGBk51fKGqxJ7(tcY0+74WU!%3Vx-dHJBR6cJfz zU=2K;u$LF*d6JWH?OoIF=K{hyq=vinnSycIwcZt$eiTSG#o@iR{VO#?jHR;cDo~=; zR~2h9leOqWpTBG`pR=71YVjp{Uza6GMFbG(YRtg262NJ zwMEqjhSQA^z?1!t-gXQkTK;@VaUyCkV18XBDM5GSWaGItR#?2%Z*@ztl&l}S^~v~2 zOA?r!YoduZ=-05O8cZM=OdD;hKW88q)o*`XHz&4TIP{Ap)G%^x93;59Z`r@+`z7_{ zQ6M!B4mzmhbcGG*Aml+>j;3u&E^POGE5>qWi!}cB?tr2zd5!hPss21A+c^O8H${A1 zdg;EZwmi>iBVWg>W2`lZZ+Xi`Jk?*|KBZBYpje?DN{1LMy1t>lLrzX~joDx04ci>BX0tJ8Gz}Ss4Q2juua9fQ-R3{gXhZNV!YG@0HG7nYW@Q%L=YxGY|xJP z2Zr&Een0-KmD2y)l@bN)(cN+Rc7e=}W}oWc)jwHb2Js;VTl3?+e=k z2P<_3QJ3M%!S=|v+8q!lkUO-%gKIOMTZQbf-JA#%F)M~q+E)~*PMY+`=pa6V--qH+ zy_B()L;$r_SPtP=lPI5#HJ(S&o59*2ir5;)w^uDJC@dGkvmIl;4d4^1zJ1Gy007W5 zH?V}9iu9!T0tP!bsgA&_0vZA#Ndd4Xr26N&{ih_@t`h(yn%uvia~$9G9somEh26FP zGg;Fg1PFK+C-*Zf!;rVd0lIQ+B{%@cx&!E%#a2W3b|2&gMAyiyUqWU66C0q$j~%T2 z7hIn@2I~SAG2PwQ3Q4m0h#&GnrXjW_n4e%QadZIpD>*)bU)^>>R5N?XO$iASgbSL( z$N7fwwIRR8CVa3AetZEboG$gG0Bp&YO+GPVVt3PObKu$C~ z71*OZg0*i?4HQu}jW16LWm1+F#BnYzw|CydG053tB=5Hxqrt_N!Zjb*zFSzIV{Mko zbVWMy597rkzt#(Ud^5H-QcF9r5!C%kIDx_5^eBkCqHb-af}6?tvCS5kfU&gRwgOs+ z#B7CffL$?QylL60&OKB9{*3-{pX!z;Z!JO!XQ$AZ*hx~hqxd8-!jL)Pa&=udQ$s>7 zdFGt8*cA#5#IaVvhHG<~Mj&~UV6W`xOj=TZL>Js%Q||+H#Bus2ndXxtSr2sRB)f7vxd~j(s+-uAb9) z3?OnQU5M5Y-!PjyUEHw!#42BkOPR{@1P()fqaCW^t?iD}x=l_t9GOB0zz>F`B~xvD z(U$72RetQ=ut=hWu$O%rAvf^p4qGV8eWqE@1`HSeEWpA}FceR97g{|o>;?#Wfeo9W zza6Bj5#2-6LExJk%Q5DR*p3&aZ@UqBd*^v8K}3$$3p1|urZatA@I0$tZ0T5LqkH2H z-OHKeO%?X>r3@8Xe*9Cb3l>>x!9H3HS7fb{It(I1Wf2`qKbhG{OQXV*Q8hJXSFE1{ zU0JpPk=X?74p-y4ObJl5<>;x&sN_%@2v```YJVTb(|xK^5zei5zWI{|8 zh_3_x;W`ZZVxY;=yd?J2p~kZHCDTGOfC_QI<`OO6fmj8Vv?Nd!Uty_y+qc_tNd9gG z_5NHTY~mZJn;_CX2*#zVke9Y92%n{JR)-L`EK0fn8ufN@L-|MF}SAVDhS*jB1qzwk!lqj{I?%7-fcvC|j3kyEZnSit7iA z(GW78uilU}1n&0Ze;;pvq!29;HjC@!^fk9nJtXcoRZhu$=gQ%?zMbq?acnG*_x zTGpFk3`>#P1mHh=Rp~aG*+!+{)5Ew1>Ct_FPsJ#CBVCtO93cC}rF=~fTbwKG!$Qne zx$v=9C~4pe4JAIRs>_>BxJJ9^J;=m-fnccw?vsGiFgUS66@}TvW4r;H7KE*8rhi(Z zw|qZtJGCFX_WDQgG#|2&Z3;kgTA8;V zh(DQ{mh0P8U}KzJ79X<(Bhf=L3E6_tH*rx9ziv8#$W;BI5jBVC(Q{h%fy{zlHX7B^ zeWt}B2(rp8Rjlhip5_8~6tn(RoS_;y9Nq&1VUroMmEv8=`*W`qthFiLs0LtW6oBn5 zD6px|g{j+a9kMcR@Rp*uZY}@u1XIN?NKm_PK~Aumb0WQ!`|gI>dgU@a?h9+L1U$LA9+*H(YiSh7NN90*CVda?R=v(gny z@xEYPP#@zTVSgLf2wWjJ?D1wU@deT$$K~x032zbj>f`!Co`&0e=$aufraGB}VOwYi zNmHyNs!BVcPaXPx)8Q7~3`FLQt>nSUlQ-EFnDeK-+)sW!A}RF5gOyUH>JzF~a0^2FH)b#}e>w-hUzD5<@@&JX;P9r2OceU6Oj>|vVO^ze1 z-&IG9FG-J>HssHl4wd~dt59x(-s|CBB;YF3aZ%>WAEm?7Ugy$h2vSqCc+Zs=FJo@43(| zOLnKn81ka0+eFDdZgf@MDb&CPUoxlNeTFycy<1C%Wwn^8IpBtlB9PLwoIP_OM@TfP z;2S@lugOkz+45FxM!iTO+@!96;ZoZTTkocM*(BSTyS3C^-l??gpm;UVrSgNDk{06( zNUSi2L-mNW)=UMub+mgxf;1TWl*RH5ONSk1G?40g1>;OQ3V4wFja7y2;3kdKYwy%= z_m-DJ4>o*Ew!l(u5N*hNS_O=HY`tu1+yQy>dXG2Eu>lZ5$ER|JD-YZtlQBO_r&7NC zVeJ`Stb%x)FH#kH&~X9@sGhYYh}4pUD22$+&x-G3qQ1))j#8H9g=$K9W%ST-vrDQ! zai{l?cfy;WANs09q_mL{dm|UVv)M4dN@iYo5&f=$K<*Q5YFzB5E^Yk~GX8az2Os5h zuXHU1n8#LzNW=OC9nY=qgHLSUK31`Qt48$S3OaZjf*Wy%;-fAdpxD0U8uH&F9=c5+ z<7CpT_pJ~1RE8VRU4!X*9@vMKzMSk>dU#@r1vhf}V>gh?+GT6}(Eps0@gGlo_5Q{A zow=3mzt3V}B$E7Z%VPQeg43z2q^R&;6O>l553^4J!uc9@xd%I-D7{d4?n*D0_)%lj zp_sd_$4?|?26-zn_rxd7E*yTl6BRwbQ&JVOI$l6mp_UYD6bO8rm!DdRidqXFDbaZN z>pSPaF`d7Gor!<;ML$y;q`iw$ACC;@R9pSIoR&*1*l`-7z5ChZxpO}0)8%?!uRLmj zUKHDE_3NaNZ023r$_XBNVDu%_Bi_0z4eUIKCV-!%c5p5E+aMIhJl!3gq}Opt zD@QZ$^iHfMXHwVcVcO&bf3f1|Vs|c#&*GKlJIRzF-I^;9W?thhuOiJz_>B1%&b+`I zH!N~>4xt{#v&&(Ylpjr=f5iQZ`pbA6s+SX^Q&q2g8^H=6T4VVkcD}QTYM|^X%3Rff zjk$QpYQ`i_{7@RMNC(}59md?leNzBW%t`SLv!du+^TJF8qR{$;9lh5t`?Qx#?CI?N z*pHMCeP54wu`$K6GIOv3YUl4CcntEea-CwAGAdc3F3Ljj>h}W$sj-YlJzHGzV1qro%@|+ZBthB2EIZE4MSw^9chi`;a2J-)Y$+BGM-T7d%0Ot>z+jCxK(r>jN z-wNi8v{{RPF=Ua+ccDn8Ph87TN>cli#p}xlwgw@yMFZHMmmxg{AHtNb8~K|*NU~Y< zHD}M2WTUfR3}3np=?S~2EGcnpP=eW5s{89-^ZIjn^C0uaWueF?iYf9kV0KpaVka{p zNsX2w}2-`R>XH}9Cg3Pe}zp4vS6Tsqq}rB?awy_5v$LYLedGhfE|R7}&q zA9WP1GP`+xNsQTT!|;KXu=W?|>jCAvshKY}LisE)7i(2bQ+bsg&Qx)6Y7{36B$MP% zJA`fKb(+^}nqog>N=^fGCgYhCr{$m9#Igukc5ytWfB3jpIA*>zy0i){O=U;DgmwrD zfU-EIuR1!IUVmm&ZXPeJy1>0`GCW`Ypf)9*fSHV45=BQyE|SF$;M#k&=%9zN`Jb67GVtDU%T zK3?{n<~uK^u?BwO>!-NdKOCjJkaua17fMsi8osLKEchnuB)bx$$WZuZ9?jxHb<|K( zMHmxODL}@LA3#7e5*3pe4{n^h(DBE)rHzJbeM4i_4vV981)8n*+%{O38u&hx*Laly z6zDUh^x?*MlcF!%XK+`>m_Q6N;&w)f+8u<7y)^t3>|`Op1*FQRBba2_2~@ZfSQWPGEI zvX5eP$|Td~YtM1!6gZ=3Z?PUrDj4PKJ@+o?3+TIay^twAPc$Hm0vM(q1IUR{F7U#n;eg zLGE^Zx=Tfmm4g*eVi$wQsh08uqy%SQkHB=I%Pk3-+h-e{O<^b_ET2Y^x)jvec+>6G zpdKhsEj*del`g*h0c1dPq4;OR&UKilYZ?Gxjw13ncvfHVg$qSS0nT$CdxN)#abdyD z-0R+H@$F05AB3+abh>mtx5(nBddX<2m0cC$zzz#m3cT2;V>W(x9-S~krM|U>Uk26i zKzxK__4u!p#%c5G3&MC~&?UJ`PnsK)kf6bk%6lsLPa<1h zcM0SLuDIqx&Lr^-mn$sfZoklaVe4Wc94w5}8k02{ssDtct zjk5@zjDO)jOBxLRUH3CRET0owt~QVM3tN5RCj|GDg6rUFqk^nvVW&&56MW%nkV=5K zUk_%g`|&Ahm<0aJSp#srNkB^p%^)7;fEP8Y+eWKTNt=XRv3{ueHm)KW064iNoE_l5 z0iYlBCJ!TwPTv`RlT2oaO_F%7&wd%?rh9YFmQxtu(1G%^DFp`hCGA3yYb}q#>l0;OgPoP`x-AM|r=kh*vJ=&p=k)BWQ8$-E zAaQ}`H2JL00i9R$#{%vqPQ{aQ6;6@#5d}gk7gt_)@wDuhBud5!3)mKF@!7swcSVk^ z^+rp$n&@rpYZbfD^4vVuEf9bL%BI0{EeM9UJB7cexNUmDZ?fk6E#>nD;TXV`O}-({ zOo-7**N)TRdAVura(!JqrF}AXeXrZDPNq@6*)ijL9*=MX;^(?NtP^++8 zwT|0yBGxdq*5z8*c<}IS?fA1Kjr{oZLjf`fqjbWW)P(-rXeY+dRt9}lq)M_Y_vvXD zghYNSWp1IjY%dU=u%${wkkVLy*`ljkgBvfZ5YE}3e%%#U$A}(83#b_SM+M64a zK!k^()|u@8E+q^=7nW8i_m}`T>0e$X#H7W6QI7Fzrq}{F)n%X%)oHr*mUXtV=!<5?`7Gh|Jj`jxABY3puN(zd2Se z#56wJ*+yBvkm@}*Q1`^rFvdfLvWc18jhqSUf6$Gcif`*(X1hEFuVpPlhq--mvN+Xh zpu2m}>{$$igYFcX4#wj%EomaaI4K8()1XnUL(5^Fvb4XLsHs4ySZZ9F_ZU3)kaQus zXYB0sVZ>K2P6j0JWRav8!U$t$@(`_RCERhTJKJW?jyLRiSwnrzirYquPDB#Wn(!Szgi z3z!uVF*<6e;nVRvZpl~ma?5diM#jtX`~%3PjE%6YPC*9|Q>_TbbX?Sc6(dlW(Iuclskl)bN1 z3rNuGPTpSj4qOi@P5~aK1s~#1xyfqQg6m+Z7a^=&f|6&?>j#S)iagCS5+-Q9umLUY zi75bdOhVunXoJOdOG*;C2kYY`bcAL-eKXxgA<`!_R+FWooIELX8UUtNz10KSSxuy= zi!0BP+zeBB+&)0n%JM`mJPL}jfTDFCssI4R+HY|=e z#+~amFjMECclG&rU+&!h~!OsLEf4-F=d8=>@r zm}@l?+Wki!X|Cs2=p^;4;v&k2v1A+6`q}Q`q|`~#UN43e`YzDf0ZT)+z9szEj+|3j zH=Z1${bd!p(0ho5`lrK#c+GFEr7@cHOJ{;4tyt^}iY|KS8(@~frLoyqn&)S)FTI6H z@_t za$z~wQ2LJjLep*?bwdMVZ?8HAk3e4S#yRfS2Bjvu-lh3Oqn1;rdNaCH2ZaJtX~%W1 zjA0j*9iNY&G;@72cLuO5 zCmFi|C~Eqb6L+J8X)q+}wb?sUAKHR+!8RSbof8rIX|pg{D57sOxH&B-Pn;9+NvWT%Qd(lLMFqmQ*W*DYz6Ixc!_1!L=xm=!u*h0DCG4|E zw~VdHTW(!%8JTzcq|b}Geln^g@OF(0_pIZZpCqJzZ=uS{`62wEIbiq&( z%L!2i)B%5k1$hp&fceTgvHK zb_c*e&q|v^Fum%s>b$Itb`odLhX(86`f7<7Es2B@8_#Zo&!^dGMn`EKBqybcvX=q9Lo$%($6ag-~&XF zeeW;vP`r^)XJ+EXFWo;*izGh#kgJm542YCUVZq*ihSG1d+;30a{P;`ul0D7UM10e2 zu66s;8391U(I^i@I#0j2`0aVL{*7lhl9zMGxMv3dqpmo}h1F78@8T9?q!gm7GU2Kn)ny@yL2sX@1r{%$Guy z>W*eftjR4$SLbqf51R&+I1K4+-P;WWQ$K_CNw30rCjk5?8xoE#XvXeU4Vj8<{93F_ zp~2=vQFPIl9F7=oms9kDv?f;{ar2MtCQy#d3})9 zd*2tJnwd>ebv%InF}@|BSfLV9mc7hiJI=7azrkX8e4g7(T@Ro_*8nOsytOSADqGae z1?*a2q%;LL*J>{`hTyBJANoGil}ogp`@rCo?znL;1EhYozz2*8w~iQ?BhA^n z80^$k;SLw`LD|hJgr;81K6z(1 zGdXW+KoU;B8W!IBun2kk-QSqfya?0nb8ls7FKHd<{?{Qzd)2ZFEETb@RmX<)zAO~d zE2p}78OEqn_4(`o_iSxHcRuCSq3Zm1zChz!0bpAH@N3Fuc-MSg^%+%k$;;oH<$^e{#mK_^Jm;MhkkIoSpqu z(fP~vu5OVQ>1W3B<4HYg63Z+9(bwxdPh?cwVuhqNQ#F)ITx|@d@0i~F0=`DV6x*1{ zKz0gXz-Tc4yLHv5aHVaTFj) z)&_NTfvd;@sp|adj_LBBT<;iy<_v1lyIKIo=D|~NKR#B|-`~ccCS!BaQRMY9H(?XU zHD)!4KtYO?uBY0w)2PwM#n{TlxVxDt?TljdGQW4e1Dy&0e=>JeB6Or0tFpI4gl4V&xI+tVYPF`5%Afh@+SfgEhz>Y#rblRNHR zU~-HS1)gq`ke6U2SI)BTWI0lV{J8@7E-Q~cYynE(zQ^PX)6x#qpzYkT;=s^HjV*F1 zZzkrBVF0Q~f~V`483Y6PMFyE`tc{c6jFPa7lDxF_f3I+~=b_nJepXr&tKMPPfWfUY zu$48F%`x$#NwN1U(D%+7L-JFe6tA&0PM%@B{gz!m-EJ^kp_;LjvcDMp#Ug}(168dT z`{GKQbzJFoxJWJ*6wWEFWZ@bRIt{lf@fy<`Ny7kW2P6Y!V}v~FxHu%z34 z>Y8ksx(ulFK^(Nrm$H&H{7?lxVQ}tL)=JgT-g0ER<~R3R9n`Fux*hv?M_stKv?hEg z$?MdI*z7&I^9E8$3u4cu5!&#%+Ne`Fp7FpM;bh!g^JfMdRJ2^1fl+mJlSF7J5n_Nx z`^E5R0F5}?Wn%&h17OJ<*@x0ut90wj-Qc3o-k*Cn-PT(hc_9r-ftxi)>)h}2Don*| zC7!DTz!T~~zSz)G$e)Pu$n`7Pmzk-lom*&#0>$TO z0$msZU04J|mMdz+nz<*{%Q)TO!VkyIW0^MQJ8jb5ke7B10taG(2*vDA~k>n6hs9Pq)TYhOF|7D1W}aUNvIJ-YLEyBB0=Cz zaPRk=_uO-T=lQsYeI98akE*|k)kFXEfDy?28L;k zMrXR`Yn0NM3DV~oZAN~Fk0k3vts@mWm4D8xvL*3%_BEN#*Rm0#GrVVG>O6nF5nBuy zgVaxCKxGF@pztq_dC*bD{MXRfJVDDC<9gM!C*jbwQxJnu@pwDnI@Q@J!MnC#r@))n zQUknsuX8(gslY88Lo;%c6D-6m--^Bz)pB8I13QKx>khOo^@;4=xy-=;wlisO| zWdYJF9X%Uznlay&%s<=#-Tc-X9!To)!@^CF>-SEX5?sd1T2g{&+^2>1xOHRn&-cTs ziqc(%>t1Sg7SraenAHah?3_th-}yqF}NBcLRO8?Zyzo}9wIvp?AB$Dx5=TXo%1p|$c!_Afx#7eX3OJ`FBZ&%>UQ(n8iZuwJj z9fk@8II1$Z+zF6+@PXmlpYIOfGNI&C5?;@ILFWAPzy8UMf6B%`)#0DU;s3Yx(1W|) z^9NzM{(NsQmHgcpeiOACl+C{i$Y0AK7C`>?X7&)rt6c{m141B?wTu&f$kyVwv<%!z z?i6S0yGW&BwcWuoU}HmW5~YK5%H>8j?vayAnkdsa9oGQg9a2sjE>DM3DZuJ`G35II z1iT26GZuRQi+fg-WKkC|OY-KZ?n}M=#mk{H*BfIbZaMb$ezRiTk2m0#i5c@fPpGyc znmC^NHLoY7$#-jvwkkVlXBlZc@cp@>iYiyxe4=Hr@~6ERFun&4?ADF0#|kQ83dqvT zpv~pss?4AV%N-woIA}w@FZX6qNHN5qv z`pb+ENn~-OTWG6mg4+wlpNjfi&uLH*d%OZ+u#3}eHg~{Vk2FzbYKMV-w|omi`p8!V z_4X{APJXWWS;W%Gg!~lAwY8?{HUD_}v8T|Q2=#MB2q9G{Er66{{UJSww@%vg=fp6y zF5xxw=cV*{^LH_>p|EN%ztDMdR8?MQ=I1v$^*VtIgFHP=>)nvi-W#c=Dhp3t zz2_~Xd2}YK-fX6rlyG_B-7(=wIYa{;f)%-wzS#H1z#R zR`F`#(ll!fH|Qjlci4D}^taZiQKxN~|2k0u7UNM6z|ObSxBJ!*i50HyPF<<0XW^=c zOyIsxS=XC1dfix(%1vnhbF9{XJ~n)frIuAOG}`;YBv(Bfn3Hv@>n;2MgyTDNJ$yld z`V)S0@VCZ+c0;e-nT2$cKQDkuU)Oq*n_tTc1lnzW8vnHNvZG;>qvlkhEURIHynSSL zq!#vvzohTNyU#>c_)GHb^vizJSFj8IMZdpEPe+=G&?32*yoHfMiW=4Lajsd4w7)Kg!TVp5 zq=Pbu48=sAC^h65i_S5wZzk$oXXbj9w>-T&fuYoa-3cg+$OMV*Z{!C7!Qz7;Z3d?xMp z3Sh7@{-O_=P!Vp_yS1M-p1Z%W@UG4uJ|r)unP5h4$YaD2Mo#4Qryj1b6tc3wSSmrc3bZyN{ZT)Imlu9%Rl5@`T>Km(9tFqJ? zlFB(v&eeITBIPYs5|39gulJ?0o|G5?&9m!}pH~m@AvBDhHDX0|_)Qji+V0v+^$dNJ zrKcCGH~B1%@IRL331T*ioK@l`zFJYG?4Oin|D-gJe~jia$;&C1_tgdusg8o+GfzJC zkT{yYQ%*{sPRY(vS}I%<0tLSYkt?zZmDSczaQ2oH8HYG9-6i5cTPtwaNn+hSU2_oEiF77qt8?a!|= zKf{C_cF&YYD~yz7U+9bpJ!&pav+?-4?{nq$#xo{O&{YwWuR>2@CjOP8Mqu7hvQo-V zJ5AY>98dvU-l5OW-;$022FCe$4k+SwWy4#(33l4R7y?BiD81 z6}!;)B~ErE;+#D4er+^jSGtCmRFCwUU`=!ry`4aOg5NU*(hgZlnY|mElX4;aArTzZ zeuIh(;`1}PQ$lFZv$9)PhWf)oGb02}oS-E8OJ3pT!}O=Fd~5^@fJ%bw)DUSFjOTrU z`tW{83Vf%L_viE!8RMgvz4Z~3Yy0&oj-Sh}bdH^xK+Z1AS6CD$_$EvYrk>2>Eh{|; zpQGmGw~7%UM{uT|EUNYSnAIHH={eQ+CF`|mKR}Py;zepzv+o7V8UZOYY|hF8q7<-j zwHR>j_++12X7Tu0YeR2xzH(i*%KAePl%*~9?fa}r5dXOI$5|fVgnRgyI_G$Y&Ce*> zOVyEF&@}J}#NWMnktlvNECPH00bQgd%~x~h8S3T(1baa2Cdm?pZ{zjj9g%13MB&DL z(Dido?{hqU^2h{gTpMZ*-|bVI({{S)h_q-gp>@#;ve~+IyNIW^hxqWPwW|QY8|NST zdxWTeJc95C>DB0JZWya}*zCETD(hz54nB7_u?FNAkZp%UKrlyw7uIBCFiR0k6ODz` zvMkH{(e0)@R(0r2J;4+me%h`_6^*;H0J=J<5#YX;M=L#HnGE+}=hlByA!`vYFqIs% zx4kmvxOPRRPTIYrV$m9J5}|~`lPU#!s~}8D4>xB)J3ZCAIKiVU*^C}sp$Ut9fpaT) z(i7>D%Rs$F^YZNF+evZtdcLP9lNrl0X2OZyLiJpn(7;0kFZ0SvmA1nsm18juOP9ma zCerv|UwYkHpBw|oA4uM*%cXNy8sz=?%^|DCJRMvk8Jk=@Q)5mBaN4sYkazN>K|z8&J`p0Xaqe%uAo(HXHaAAOU_3tIi5Fv0vHA2=~|qc#@1=u;a3LZm`aY{`^zIip)P7ERV)?f)}@9L`By zZo~Yn-U$2n^4!aC-0X5Uha48BnQ-z1Sg#=MS!aGx=!8F>+?FUn*OYya+*T;yEw7)p zwa}SL)Jzb^Ex?~O+x=9heDnRTbnHlo&+=z6rW-$FK#LXjfha)u*5dyC7060kvoLv) z1PRk{p!Uu!wSedzhr-K6;h~+W--h+j4Gnq&sinD{;N0-MvuC~6XCr%D+jT%>-_43MG7d8JmM+cbUVL`x+gMd<@YO0xS4Ae|DNJ6^z zU2)yG`4Ntp!@lyXtU1APmL{Q4T3({#OLwZ!hXjL{(3g|9szuUDo#5sS@wC)@{eAQ~ zmy1&8q**k;R-MO04;>f0J7d0oKDIB*-2e%;ox}Qi`dxDP61=sbaEBI3xE==)>9B5h zs+njX)AlACue24~flLK!I6UWiVC(mnKzQhYsa}fJt6LRY%TL6z`4=5s4ef$um%eD7 zmA~Xr5NG?O=XY&>yHqLmoAF%+O~Vhf+IX_<+Kf&mSYWlbP!)fpciN2m7fz5ho5^M5 zb!iw_j@5m#@OG*F$%gii@CjllFqD&^rkAmfdV;2-j=nMRVsI`b9aGL^g8Jv_F!GZQ zzG_83c_at`J zru9kr;DYwroVMENA}lG8*gjL1XQBZT_2yF6y88ONv`8Q+tNv~{9s(9@vGGeqsec@4 z50?_*?WW_Ttl6yyJ|E@AHjfUxzmuH$KLfiGg2PbQ1>+uc%pM&&p z&-8Ktarex>&e6th{DWrS1HP|)3`8!rwt|mpq}duQYX26CxA)$Xub=JLLN(lss^GHK z$xe7k-E}qIqsbIRdnbT z%JBTY>)YlpdpzT?r`HGnc2}SBa=lt83O}27JI#5V9W1qNF3-EmedNw1bpfWc(fjKr z&mvCA9d*w|%YO}4sIop;?eGS5b~c>2DA0S%rR(KBal9x?OVgbyrvtL?wt((`296P+ zysk^p9>ydpRMuswghd;r@%#CYGp{GfBhJ!aqY1k{7hP~&_!GEWw$_(wt^K|9)9aV> zG)N2Y!iR%dY6sVSMrSnGaUC}QvXrAaY?*Spcm*zU=BIj;+S3TK9HIpRu(Z%!Shu7% z**(iF9{OeJvZ0@-UwFUGXzWtRfncDCN4F{7O1g1N_X>cKIpr82FcsNztx|cc3JD4t zqmLE9lDV0(viM#xT&ti_aqrAUy%wHW>LK8RKJ^f&JLk@f8E3Mgy|!|Rv(-^=VXr)+ zS;rdQiZX);U=&k@;>Zu{=mQ~w+UPU<;aoRz!3Q8<6vN|^jyMWVGhPbh1RaG-v`Mi~ zBfCU6jNiH*ePNd;j0{%1T(!0!`OpIe){3OB-g~8C%awB*ESdnfSDtz$k}K%I;+5Jf ze_z(*YorTF(*HVm+*-wNqI}XN&tCm{J9FW5!3k<2!;&S(+&$c_7_JGW8=X~HY!P14 zo}}2KwoXUq@%lT1*3Uu;)rX=k-FulKnXB7zMK|U>u%E}nqNETv-*d3c3)q67@h4LA z%KOUPZm!p+?p=1Lc*A1yPARo5SMrp9{3Vr~r{QWzHt5zqcKi!NEi+!dY@HF1l7?fg*({t_2 znL^_=*}q;ZpS{`)&b>xQT`j)c5+eJYgL%Hz)EkB&^L5wDk%w@?SOX%wEzrMs5~r3)_K_9EM3;728M6yb6)ZVm})r8z$cQ8mNH6tqk{j!v(i zQxepPplZj)l;_I*Z&=mt3h16&eX~5#jpot5&G{VM5B@OXz~3TrE@P(9LM;0kwwq1@ zN=x^(PPJ0X!kCK>^8y^(-ztZ^u2gjoG+y~pCrgALYU-~%*Vj>8&`%N?ylXc-lQG!) zuJA+ZwRM?(A=wLSG6nJL*eu!2GkNKK1)Zr6m-H^>SHrUX2XK*u3DXpliLIjkSdtA5 zTa=KZD)n-|XiJ-5XYzjbfo%jwQ3LB?G&xKxis$jMY2LpNk4*9jYOALB)G=>pJTsEH z5T8GFx*%;G`;{9Y$&#*ggN5QqG>Mt}om+&n!6!BBfG$_nn5JI%EA zP+oy*!S(E%7L}{b==T*)O;C4V7W!KP=fwne57H6N?%j?KWK`NYanc&8&T&5vdRP+Vq?Y5R zwKsF z3H4ug%+USXBMV*C`|mdx$^B0ojQ-z7k)!B=*37G> zoUlg?^t;-QC(>0lF1}rjIAP5F-XldYgU*`QvIkll1jZVflnbcM<7>$>wVBvw>ihz_ zI-IgUHP91n1+kBgPnwtqb<;` zW#yzK)a@J{?tAfEk&%>8b8~j{(0gEQV<&Ol&d1TlP8W7f;+mtE=N&r_H8+TlxNne^VU#eqh&j z!>I*kyz~0-Z+pNnhy2Yj*S3>rPg>>T5yJah49yT5!kSI^UWRx67^8dp8xhm)Z;W*{ z;(I^VHyuzOAXUy20n0o&u_e?9jK;u5=x_yamxa)~&uXZ6vK*?`^le~JX0u8;*!_4_ zrQ5%zS>=rzhFj)Ql6}!j%7Pb^t% z^0UMls-zvL1p6<2wRjB+%jR|cqQHcMfznDA zTAE8F2L5Q_M{b(aKwQ?K0akIwE|b-}lPnyf!z6|y`5JqUIKf<}4YiX2nPIE!=~XS5 zsXCL3XI>#LS%l1*m_MB-F&M%MDQPJxhi=Qhy$4wxzzXKYOB}(t73yA?D*J>pcy6>= zAz(4-dV-J>N)dTF(b+c9I8 zeM(2X$arwZF80C1PBXj25I{bEIero`RPh8VbN^{Q7^_NfBRKki%vE0^m0+$l)x#+;lxibnM+%w_ zvR)b~8T6>MM^u}kHxQpB2@@vf=W?5lDi3(eC!31Xn#!6`LDTrk0lq0GzE$BwgliRW z{j4epq&dYM2c8KQ5jDLgpdy=B8E(#aXf+GVVI+)Y3z#5NPQ>FPaTp2H5a<&O#-j+X zW@uN6cJg*e+dXlL93G#cY!N?;ju-1za53B|o^mYhs3d9P0e#zcS%3-&w;K*Je4)LJ zSt$unu*Dz2tgQp6`Jx{M`bZ^-sobMhSf|DWhnI2MY4ebk#dsJ!K)y#Ch*%#g9%L_R zq>{hHEJB_vCa{e(&LrwgW0+g`J?VGJI~dxy%%dT)imqM`h|8#@6I3!n5PPl21X@W+ zJy2fx6R<0&K|)+7E9Qjs z=+`g=d-(;igC^~#F6Gw)30f-&Xa@$$c%V<(dw-|%8M>ABNE6=*lJph&1ifK*$+*6| zPR1A&P1zTfeRQf6#7{X9yg5SZO@rerLD>Vkvx2Zu_b8!zJOqP~ZpGRw@fvIO&IEz9 z`!)a)^okS887CaFagJ7wX8S4jeX&*dqJd?hVUxf+&yA0mxhDV%cwjp;Ry?92Yl=h5 zO4-H>Vb^?f?!03W?(~*<5T92R4Y}4`R}0rtBNSTgF!D@zmdhfCC^Pnu9Zi?yN)BwU zJ;eMRmfo<|Q0hp;g1RvvwH>Q&q78Zst^F*`(*osW0PVV=Wvm4NTHym4bvV3&OMEr0 zEMmCOzLHGma|E#w!f4CUWw->;PFdj)*}&HZLEHDnu}i@lDvzVQ)T+p%T)!*$iYmM7 z&Kv6<{Yz?g1%hUCcQ*+Lwe$)42l*7Hz2g8Xl40KsU|g_F4!9H>Ck`qSce;h$7%h<5 zRI4IEW@-5nKv_zGL(Lt;V~VIkSJBF1qU;ZT8^F@m<-@fSX(rJ?fmOTRMQEc^sDoI( zy<<-X|7H*kYvCxB3taMDW2j6LK;eOf3`}R!DwC*+n}1|w?mr&#V;Pa53Hz5R4ob_J z+ax18R@p{|6q=hqy z&f~Eca|nJ|bh3>&Ao|E0y>S(Nv{VzvbzcLw`*Z61#k6tJ)k6w#!?DfwZ;xu?On|i` z((NzReaJTluJbeB-rEu>;eY_XJAVNq*w7!zfRn+*+aGKgzzPkDJ~BdY*hV=~li@jJ z+v!K>29jr@y%OM^|H>D)$+qQfhNo5s5icDOGf>vX=z8FU!eo{lxkj*1IU1uqgX8bm ztATg{R9D%gacuPmY}0O3P!IrT2>q`%#<00ovO79Mq)i&*EXRz6PC|b)0a@h}RpFDo zkt)_r=>j;Z`J=o(@a+IWP%q74ta$Ma8p3ek z*v7=}Mt~&O<-uh+LW)4~`gM4;4$$HN8LlJtVHY_lOZZwek;3p2rV4t}q*$L~okE#$Qf0?1bEU>d@|%HD<1iGaZ* zZ|tbml6jXd09Sp#AX7RF+6;H{4SwKNyGaPcL2Hn&bZUl(QkwMfAe#5)r%TYz@vtHh zD#`1L)0U$_6rZp-4T#w@rJqY)lkoahW7&O)`5b6* zfm)7vP-?(hDXcP`4R0!TG#mt2G0SEa@6!GEPPg!+bH{v(bA1i8fm2Q(=WOOuwdv!8 z^$%1dMbLP5&(37$+5w$m86VIDG~Qk6L9n6?Mpy#?lK=DL_$yg1EZ*(FD<{J$x-7zy zR>UC3ceJ+y?&edVw0jScEJ3%T)GXAw8&WBQxQ8nqVHKr^hgxX>-uI$K{pc8%vw5{r zKD;v-FKKH)vk#a%cJDU;C~+r3zXVP=C;^DR{ZH`3g1wUg+2laHjwuX~z0XYYxB=J< z_;P4hA!oT$aL%2p&nO-sjY~I+$lxBv7~sswpawG~+9M2c3P4I`m+vZUnEuR;U5us} z@l32gskF!J4m@mq25NpE_F|JDnX5dP7O|0hMDgQ|Q6SX_1_HpD436R~r)!Q8exrs0 zpe)epiJsXxaDewPW2^1)vzQgI}UITLJJ5{y2R!g3Jrl;P*#37hepk zR|#H55TXery2{#Gc<9S!q6j%p4U}&x@1b|Q9h8{Ha=be@EvP!nmk=GV432@e3_|KO zh%F-M6}^{uA&c1L4$OvYox4Oz25b->w3a}7ckCcwmzx_AtY3$Td>xgA@Sr_6C&c@&2z3xc*4b;h5q`#MK{!I}Mc(KDA*fF27v;22H|fWUJqrV_ z4(K573f>>mO)6Rgjr&HyaiB@jNYq6+(_aQ}i-!mJlcby~Ej}#lhEdzd^2$2(`9NJ< z@i@zGBp{3d@T`e*U6JqpgAB_c;sM~i`wGRQ-rhKE2`eu-1VD2@0qY*KfDB<>_g&_+eV2LSB*>{`92)S-ZuEwrGISnPG(uEW zRnsm-RiJmzih&owBRTYjF#y?a;OO<45a?9j1} zOWtVhw#=XcZUKk7{RQ^{HwW}*EQN8V3iMMhQ6oI)eBV3#UQ5)-uBr-V@)f9Z;GLt1 zo0{+c*P9N3i&TDvfxp9FOWpwew*9wO`hW0pICSOqrZ< z!yN_iN$RMP`Cox^5Y-^Q4+z+YT_O`_4=K0ylkT!%*KTZ*_h%(ROrc5HrGou1L1~Vq z@X66aH-b?WxLOAoh=YOXp8rbD#3HTfJE1E@cvGCkaAwvAY?eJL=*U+L+!FD1=>`Z~ zgp%k4!^?N`ec0B&2F7wSAYoKdTyRswbnmwV3T84JBDQ*{k>zaowNhb5TqC;j;p>f` zk0*%s%NAb4SVrdr-{xl+IJe9aZ`vfb0~7Lf)MV%L0Yn$wzfAGreN)`QqZ(%72@{hK zNq4e6y1-HXNun-2kf*v4K5k%+OORWVF(uBL>{K1hvd0$&whdrKT4WLRN+al^=A;w9 zj=(Ujj-{V3)5s!m*J(5u&q#)~czd__KuGnVz@gz%eYrIqY0O`QXP4POJzT@7|9B!}lzEmV_N@ zIH(l+w-z6Ky9p{gqrO#69RT;{+jzTO->Gg{+KAp@$AVcRv_TaJ0|hey7;q?X)KC24 z1UGlL6wLS$0meOsAHyyV6HSxx=%U)g=T?q8IT^5Fo9(say9PigMOpI?`J9!M@|=6` znjlg75Gp86ZhDjf{|aJ}Ic~f((JKen)B~V6vAK{NfZ}JFy8UI#Kw;8yB*ZzNOgQmN zW{zt@G6Qwi3=M$sEc*?JW4wwYh!%$~H{h0dBmom? zS1;98ksfh>ZLoJbA`2hr9Xe*#4}f#JZUsoCFmA)J*rQ3G-q&DX_8y8=TZdI%CC#`Fq8aNLsRGbAlMFGjJM4l94T3LRefop^<#V%0Ri$_R>b;Ul#%h( zNGFib=%wJi^ro8SOG`G%ARt#I)CmL?LynD!8Od8vz%!;o?Xxbc@`ZS^cQfT>b2G?# z%FbsaT4WG>g7S454Pxd21{jlTd7vcHFeb}{B^dbM&N~-Z7fZrqF(9)l;ci)mmQ|!q z0gJ1u){7U03T2InYKEKVF3EtR_F((#^m_(ttt#zKgGi&7c!^V&oF1GWDHf(e?uOPz z54QEDYdJ#Dva>&}y7McOiwGWCSk{%0c%vvZ;L*LoRDV)8WgxC-5a9F4tbC&i>@`4J zf0-B#s+-w)fS`|0FYcv6G)=2Jgg&e!%9uWUBURAz1(=~M|RscIgBl$!)40IPb`NnyYr zgfti}yl7tp5^ta*W8@AB0k z>C&TMVyIpH?l%JX1&C&fmJKZ2s8SnIaAD~HtaKJ&rAsmPA4klcJ||?k6p=yHA*R@{d6i$wz#%EORdMV@3G&zFS>kg_?wn%Bf#fLz|}{+6|XUv1TEmQwy7*AWVIcu!lvNs2Et2%ywEVTEPiizPNLoJyl0K@){wQXV6l%|Mvj}|AO+avzGzK1wz$^}#7VbB6 z(U@~+StZjV5Lm#d8JNqy#e@x8?YrKZM3KdP?zBJlkPQaWq zojvGDsK6T)XZdy)vc5}RL*wdidk;HJKiQD)rpT_?MG&23PnyNg7A_7y2f-gNk?J-w zN-uy|$udCF2hB8Iptg648do9G1JD00E#+YP8;=5clLGLy{st)6DMe_Ho!L*^a-^>Y zlO+ro%X3yk-b-rMcNMhoRfc)nkBc0Pxks=PUk43a-+Ai;7@Q2A^l`9WjVORXx-YSo z+%}E}L28M6W2nPMycQ^y!>=>{H#l+TuSXw56ZDq}PWMVd5bKMS+#o@vsr9R=kMyT>&A!uz`FMgkW)suwAM!L+$8FPSK$dce{m= zb^5pPqF)aW<5v&WO#Vv}-%R0>U^&c{ZcIXd%OKzMfvS?E2Usq`f z#xshp{2S8a5q#$Br3JLjpkjXHlT|f&FzmVR*)4`%8H!MS(sCiYxu& zXPGeEB9D>`OA01zH$rIo+&1Vs_E!T1;{3&C_^9d1Gk(kdzZK_wVrK8KVjL~|f4>lm zx)$pH2_^pDF2wr(gc6s%{9l&!efvX+hfXHXcP00`>qkfn=d1U~t1|=#tH;o1#^|ZV z;uPrYVFIsFl=qWcgwNY4dh>>~W99~^dTUhB!OfK&g2lEzaeVKm+mn4h{Lephp?lh6 z>h*h@n11qLeYNA}UZ5<{#5aK^KKY$vSy^E1;r(i{qKa*qw(l9ls)_;fAWzdXpYdy! zWQISUN8;mq-P~;l@^)zYQ=91k^D(xlZ5gn|D0N`*13sRwVu?}}E=}AJ!ThkN$(M_+$YP0mfK|B-fMYUOc zo3YgY76_qyNKI>5%$bU7aojBUjEP%c%-NO6(cva8I%!ep8DCZ1iOIL^d-MQkfz&?) z3AkkN-)(<0FjF|0T0EVN))Q`RPqlrCdPHlw#o-t?;6Bfkq+AR2qs)BF<3drUBg0~u z@@%yhaZ1KFG7@%40Qs669!&w>1FQ~U@It=+U$MqTLE*4#A~ zn#JG3z!1m0Hm$53eD>HN;x9vd^^A;0()#gq!I!$a7Z>?xK5hwoz&z*j%p)u;s%iFg z`CW(*)=GJg=I@k_cF@Sm4$&57`Rhk%ihk@!p@P_?9}n1p`CTg5E+r!sA#+P%AzRn_ z&VbOy9Bp@6U8|uHvaZ6m=CJp*xsm*V7RS>QMVqjm{W)oW$= zS5OT|wzjB3RPJ4{iW#fX*zks4=;gh<6h$Y=3yUEj`JHoyayFRb$hF4?PkOSL6f{!K zB4Q*Yg!$C7MlK3Pnb6;&oaz5@Cn9ZaWUYR1^D#>}Sk)gP%+Jtr5i4nVGm=wYSPCt3 zU4d$d>$4u&H^g%m9Ic!;P*iYNA?b=8Vx{@h^-nQR)qyo#$r`uxWAlvC$%rBgq9dDe z20uoj_slftNYQefW7AM{`rb+KMHEPnH%!n{^8? z-LF2yHRqu(S-)>-;~zM+_}qOWH%9#kKxfZMzP%Ip^yJH*>g!(6s_SVL1;b0)o$s8E zLzw43p5}ukT?v)_WfjY(r>>UGcR4CpHMciE`n5%&4wq6+8D4^%{n!rqSOaoBlD~(Q zIghHD7fNX*X*=!v-imZINy;`dC@US_UOf%2>pI=!^~O|~w@Eh}FCcicUz$jN3}|*p z&gjy&j~@G@eP2H>ee9r&D|SRW6Q3reX|p8p)|mv#ORPda=W`o4Gk7FjhI6mLueG?2 zh5!jU{l1RQ+Ik4o(5Eh6Pl|Thc;X%UePXTWeB)4uqHgrSg%3qQXkd;dj$Zr3=_2XPc`78ZwuQykw`Ok=6W8i(9`$D-t z?F`sPfPspwO`Mx4=uRb++Y}u37WImeuf38P0S}3)%a8w^d#xq zTnGRUU#`NgwV0;4E&*%p{x@SC?ZYQXRu=Gucbr-&JUs(uYyo5OY$dP2b(8d^!V+ju zqA2^`@`dJ!U`0n~xMfdp-bLiSyPsOhSum`|>{tpQP&lrg z--K(u?29Zi@}&67G$2=(hZf*}6dDjyr*Fc?BjZyuKBPTVr9EpRH5VTmc_T6$$4NM1 zx3X$jVzGlRe>xPIDjGSW$P{MPx0c=8kSGc`aI7SsUmC~dAz>YYuYMZMM40B;aF4q_ z&Q@9}wpz3qHgorEl0t4f+Ky= zX_Q6fx6^)?s_!J-^?#*!q3gBD2g?h!%u61feEllxvrCI8cOh|j#s$Wp)657?YO>(C zyD^d_9#oFI`ze2CZbbK=(_J>E2?H?sYt#HL>dyKw<~x2j@7=AgGqb2fdkIN&82aRD zr8^!*tj0`GD}YUh^XE)wfl7e$i@&vI;|H#~DBKx1;B+{{v<7jxrAYAwuv4C8*4W1$ zq4{awp{E{3a3?b`q;OwBZj+)=2)g&AeftD1P4{6L91JwK5;qNcM z@v&&Yk^t&`4b<*?YsRy1tCtQQWw|OZv^p)mF0P%`i6uu2R!N`GOqlp~A4Dj)IMm;A zd^#>*R7Y5M?ZN`{0N4i=3(HNISQ{w}l|@9b7Fr2jrppx&PK z25dy)*SXMzv2)TeCrl+t)uvB`Sr#2<x zke)$21Y)x2e@QXnxnJv|oVW8aIId{bsc-tueq+SaD}j+kbqW z`{Us-@#K;d|--8;U{;Nzh z#9AY&+BfweZ_^>8In^~ilzgK1n%?XeT;JFQrCW?{tKZ!2=54_5f9bjE7paXLqvCut ziBL+9qt5q}K6|^`zHX(aD0L;y9!uy+w+5tlUfw26I)lo97Lt4e^qZxA5u*iAsNeU} zQSzFW3dG@^M1H`!grpBFk&~d5lPWdLO`oe9tC7UT9;IV{PX0DfWr<-j)@sr*Vn(}U zGM4rJWN#+)@Ih*p+(*_0ogLe-sI7L$AU3>LBk?W{e#P~IaA5>r)Zj>sE2N) zL<#YUmz>Lk4?_;Oq^>I+-#H$C~veREu4y6r-YNRmeLTi<$dmf9EolDCV4-os)n~jT9C^;&Pu?2if z1~0C(YAjbQc&f(=wP&d`GrQ6n{lq}GxXak?1(oRp4iN)ibBNUKKIxbipxA@}pEpx9 z!)E6Szc%HakopY|Pi+_0D0M^KQpBxGM|}w{<=nzUiNu`FzuFgNxy3#1VKa2L*yspFBf;Gomcam*P{+i z2(8I{iQGBP5rMtoXv^ypUe1gU3mb&%&dC(0Yh?DkRu)^kKRa3{&uv1{KmWVpp(#}p zRBdrFc=U$H-_ypq%g*Nygyn~Of$7xpztscfx+ruTQ^TuU`E*;8om#eoN{ zyVuI_sbyck^>W`piuw#e#GrQ}7hA=qvvmR^_4yO?`(TBhaWIf04yMP_W_qxT@GoUe zhQIIcJ}c%0BZv`3&(1cJ^L(B697M(#1kchK>ccwRUtC#?O&4Nm7Z6^LCUMR-kHi$j zvqzmQI{IVo6Gz(R+AKyKzfVF(8=Z>-2u#%TIHWm6TO;K?d%)C*=oi$t05xnCtUe+#2Z@qWA#?Z=SLGMr@v({hlvKV5jWY{IJPx%uCXpdI0aguM(A+ zWrgbc{N%pkb)}FmtAlC&nnqG5^%031Q`%O-fzi&7Vv83#!Z;>H^}DZraRl8^V4RGi zrOvLiLSGxB6`E6|CEa;mqNYTmG1OZKxy61Jt?Ur2gjRedM8in%qLMP75{g6fB#~<> z4QKbBcb@=mi{7VTE*n~AO+BGPo3Jc-o5luBr&h%Q&hquJwfk#t)>@{T(UDaR*&kES zbp&+?ZpUV9)HAywXAEX*N!Bvp@CMq;afBu3_tK_Bx zX%;!_MK|VyM-KZ%Viak0S4Pl{w@VTnz!c!>Y^ra)o(GJY;!YqU7gOn++G;#uP@ zP*>=<#(m@!y+k~1JF{@qQJvA$721($5yhPaaMi}2l@sE?c)kZ-gUui|$4pqPi04aC z!oc8_hmmSjZ_5IS9azk@N(l==z+GBeW+3%U=X~*?1*CKqlpv`Ap%;~=ojyaDI&2vg za9ubiasZ4wK(HDRX{L=Y-a#UmR!zigRn)wJM|ohNd?FkAC3NuDnl`qBGInkvx)UN} z*AhuKhQuha8mmH%M2347&2+YcryNzBq^!;z3u`?~k;)}JMjhj#I%AT^x$aaJu4kW& zdX&C8tI-~UqAbfewwhoD}|YH_KHn$!gd+$21eyKJKh8<*z+ z<$(5ZXO~78UwHs}m5n+E$ke^XjRQ%GnfIj)rhQ3^s54t_sB)TJ%XtwFGuf!il1L$q zL+{K>d_0l2#^YriaEg7xZ&aM7+Df%G#`}(7LM{W1;T<8t9-+C;`Dh7h4+#xR&ju}z zmou-QHYaQa@HyzlkHxf>Jw(+nY=Tj0FNU@EGS?P36my2PG4)y1(7{>jvzNWujE zG!s7dB;gcFgB991Q}3vzthYDugNn|C@(M@s_fy+KFukMb{_Q!|q&#F#cwBFLda!{6%+VIm=y^t#EyQNRHpS-!1MD<``Hmp}i+E>lx#> zaXv(y`6_m(l}W4K#xmv@xYJIcyZP5k+xU1me8?5E2K0Gz3ta&psRi_^vUPT43)ID< z7h(r!*PhHo7kHESf3BD2x{X%w)-rQBW{9eQ*bT$l%NQoDx{x~D)g^|Tgt?+WC#mx= zpiKbrTKey@v}mON=Fp8cJKx{>H1T>bY}kAMNv0}?Dk)(XP33IvJAQ$$=spBJn2_j7 zJ5%F6F&}ZWmKM6hOU$W;mS?GLX9%@q=SFE4>%1R%KlHxXdroFQDdWKzcA;Pd){?TI zz53oUz)wi=`tUQj9g^RtG_7gdg4H;kRMA0Afgre*yF)Oc;XGhq0Cz^=;oMAEF;2YDD#J;P;(NrOJbjU=P3YmKeB?%zTiJ zUTQi9>H-R-EmoZ;>okfJa#kt^Q)?-}a(13*aDmlK$bY_A7LqB-48qp(A>; zZ0Wf)wHm4Y8HW4pcT&XPC=mu9VDI)SP@|zILMpQ?)2IlbHU8(EsK|G+Khm$8N zYBvOgb&jPOB7NS7E@cYX!7aW-3n(@EjD07!eZa~s>%yxImagLalV3Hn9AYDe8!+8a_tcRHT`37TIh-V2J`V@oD_mfja*> zkop#e85U{I_mc4CH8{PqMY|7RL+!+9OG7S61?A)TL?i(lOPf)@{P>CU0w4{|_i8=@ zM1L}II+rM<^6TQ!zD=oGz!9)w5^6o`2Dvo95n3}4AV>;o=Y*#JFW&g~5YvI}4-mgo zbRY+hkb3OQ`*N1wTzH`{;ALyFb4Pd10c8AjmA07y!ePG(ahvm%j$ZSzY zb)%Q#*L;j2ygZ*dxrb3un=;b`#^g*lkQEzOxr#cEr7?D=N(*gIrf&a`$Wn2! zEPV{E%9I#ff)sSPEvp)kuN*{*k0ls*fcPX)IW>-(?Tmr94z6caq=}Q;`s#dlyV{u{ z7dju#+@<86^k~L)C3w9x7O(yBZfA3|37XfFW`rzu)cX|U{h_W0#HKMz+B?7h&;s02 z=butzn+$hBE_NRNoT^Ez<71JhKADpJ433JMBTv-&FJ4QYXm5-tCPz4;9y)|z;cnkQ zqC*P<$nOO((1ExzTVh4p@54mLVDiLPGi6PSI^3vSF&ik4xPd5Xcv|LXvr5zJRcl=J zEaRim!1!#>tSd1(fs-)LhW3k~a^nPLp$KbeS5)?#X zSnMG(QhWRH(4Ty)0?74c$kxsLS{rZRg}b?e8opio`iJHzA=KI)?|y@AJ5Fi;xjyc% z^jysRgwBKcwhSsh-k$pF5F@b`NwrO~dA-@7+D7-dE`MlYkw=v}lhN|e!!5F$E3ghUV$84M96YP9IR zMoEGw2}87q77>I*OOPTWNFotujr@LlpS|Dj-ut}oKJRtj>s;S|lxN+~TKBr!x>tEV z>&`96w1G4T9VUZ-3sCXJN*>RA9sj&T0%Q-v{|$`%H!$-5XTZpR zsGb>9W6@{^9$xXJ_JnzrGEU|LGO7k4m zh>g>(Z-tNxo;pFYCV>9b_-$-;-Q; zSlQM(FLy2R4QZY|H^hJqIa;YQ*ZA?RGF|<-=V-*ao@I}Bw>0TAgLXpKHZIvs)^Dw6 zN;hm>{h9x1qq*u36Y^d-1OU?i1G4?jnPSyS#UtdrS~6yEHcEhk?u3f4e?Lz9qnJMU*t=$j}>ZOE?F7WahOm!Pm_!}o2%(Iw+dS^NaiVc__dY# zaE^^MBVeEJ8OJzeN)$M>*2|c<{Jyz4WwbeJeq!Uz-ryDL5R2Q%yjso@ z``jOTA8gOtKYwevzRuiR$i0t!$1t@a7NSfAt}Xh6S6`Fa0DK#)q~bpGo072O!A-zm zGWO%#@2%*6g>UCS`!eOB0JaE3n#W6_vWL zh8xV+SWct?9)28rn@cPI5U1ASel5tbIrhl&(jIwiCgoVA4&NOI`8EK=&PZCG)X%%{;0TEQs!vmN>gA=n zYdxNYxVMo@x1>%3l=L}pca`A>G*|KqkK0ELgIgWIVo+cry3Pk1+$ujy8E7eJg#ZfexL9DX-i*oUWDXlnM0@fv#+edAM8 z-;<|y03rD9jV6yvCObO&aXS5AsUj#tMI;b)>shUA<6Spbm!Wpatl@kPd+KkWn%doP z56^EBS{LfKWO)%P?uk3=39 zxa{YeuXULyP4#B-#`=f4%|Yv(a|fSCIixi1y&G+P)$@RRHE`X(V_65F%OlgMx9#@a z_c_j{AF*Wj4hr^8m7C1+HT<*GJN^Z|-Mm26AL|DEi2D8(9dk%y8Dsd;lhlXm9H$!^ zvQD19Fo#U0GEX^4`*k;2GF&SffI+UDC28_S?ijei@i_mPm$^Js$HVvCy>6V@?5t+I z=hVt>maZ;z_Nog9fN=MUo6e^$GIQHZoF*z<8ttS^$a3+Xb-Q_{xq@F2fWmV)0Hk%N z^nW6)gF_H%#t#6}`p^K&@t0cn$9uXl@10L%k+9p(9AUT5E>rF|H*2J>pCsKIO1_Cr zY;ZZcv(k(N3O_VOg2#270MP1p9rmlVZjKr1Z$D=Z6b`&wd;D{)T9&lo?1qN4Nv7nw z`X?(+A&EzLxxh}1XJL;FLbfZ5uV)g4HZ}HV5az{Obl04~B-v|;#qV^mW}EKx4wFXZ zsCGdDzzIM3ocg!>RSY_;bRU%1VDYWvrWed}O3{N#DyF2pG5EcLKz9zM^c2U%2apW4$uwEi7- zR#M~AZWvR~J+|7+DUaK0TN7>ra;<3qwf#kiT-WO?i1AhJqppAJ3RwcM<0P2$6Tv$H z7G49kBoyKUlZJ@EwIA#& zQ%q*>-l| zZrfLH&Dv}-Z`cDp?60Rqyy1UKUw|^d8gufoMC#qlwGrJd$pL^;J-d1(eC+js+EKrM z(6Ym$4WB`MrMtP~(nlt)Jh=Y3ptV%(!?ZJy;Un$qUnCsS1JuPECM+ckwmUyJ6+$j5 zpgX=g25Nfy?mv|{<>EtmCHV2dsMAQj?u}$UfRfJ15wth|5XD^0Y59()?07=7)-`ne zrPVEgk=m}$V4bJt>%OmDv!9NPG*#gTnULjO=eFf0r8Ci9pTg3;Ui#-d!%+2&dsxisD zpATDshZr+r4i)a_XPUgN+3fq!lUh39Z2A&MYi$x-|H9YL@BAx)iLZO=mW911^-vsB zfxkji;-(VCFY!!vb9rA{4Paf%Zxsm&_PZBZ{$A3dgjDMn<>npNM#~W6m(fB7L$9LS zfm%tZ>(f_S{L z*FJyqalz!Xr|QTBm~Z=^iyT}m2bv!^Pq2{i+g~;Y)W0b@!s=$=Ake{CL|%jSS99wO zo$2me-a+nAAO*YR-S-b(01S7TC$TY+BJZ&UsxBYBSv~BViBYc`)fuZbz_A(2ECI$$ zDZlsNiYLrQD!|}Q({u&u^7vr;r`ljrOguJ>@^yY@3!>Nv4{QF5TBqAr9t3?Uq5L|2 z*(U#sz9qwjO%0Zoy0H0k2ex1%i2!bVxd<-4e@X)Iw+zd4wLcXe6m%Yc;zDCP!HjjQ-u1Ws2Sm+)|sa%yva?KtIL70v4_IeZKGw$c58<7QtAz)@xc zH~WyF;ZF`s*UesH)|?A-lHQ3t@xf(0Hi?_|CW`~f1n7qS2#VYR>mR1smOFVybYA2r zx#iMHN~qgr^rpSI_|Upl-Lhc08tj3R&V}XNBUMwPIZpk%laJ0Ah!E^Mm_N^eO?NU} zK$$82frI~;qflY0^FFb)`T4f6gfswiH)eVJCUfxhve7@m+`(xw&Qh;HP!B4?mO9#| z(jCiM#R)8JfoUkPZh$u25c~xR9pGaf(F^+!)c*&2=IeYZ*M5UT2qa z=b~76jmK?pf4QH7T$p@#l$OK@=~exsSFe=wJ&aGkgTPR8+j7|11~-e@Uv5v2Fe&e7 z|CO<@yNWPPbm_n7vZ-v&1pt z)qSdv=Hahpuea%5+&~B^g^6PG6e(vBM>VV_!~uQE)?6c^az0&-%WF8zd+@6sdyVri+$c;~E&v_|+4|d?}$ZN z@17xUjtE)boFakH%irR@ajUdYft!Sn?zKz^RJ)7iebrcS->XQI?QQPDhTxdR`H_i& zFEu2eMP2voLAj?Gy7T22mwA%<5IC0{yGN=EI|9 ziF$%x#l6_74L7v^*+d2koNKiv;kSo9w7mN?f9o=LEjai3cD?Ciq}CSo7X@Z2(_D?? zfVH<+G2}5`0F5rLz&VK}UhgJ+0i(FxyA0g{D=`Umi%Oj%MD_TG9(yyZ=p7vhk}5~< zxHULSL+w+^Q>Qb}x;%4V{!;uE4{#lYb*cIpwE0u|;-vbEJE(AH^Ww3Yz?CE5_u(8p zw3XUFfZt~@JlWABL%Jv5-KMXTZjE}|Y@Ma9!^iEQzmu&QqcwNUpr>fUEu(3;&9*;1 zJ_De>&w`EbbshdsT3cRa9PTV4$t-SvxbqXc zRmv}iQ8xo1;X3QAUxxvPyB%&}!@h7Pi=XMr>5>5|_U1MF=O;VH0%(hvMJ>1E6k`BJ zd|ThMfKRHTqxS}RxB>pUuIu`Yicr}6==DO?kRX8E&U%F0Ztk#8$E!R-mqs_q!R3!m zrE0QnL0o@b$4PZTF|eTJoQLTEIBaWX@?LSx>}kvGR=(;H^K32UPRSz$|D&nUMyf!! z(&4^i7%|P>VU;@1`Jo1ygjLuCLPh$RRz)(Uh3ufPF<)v$BdDBl8s(48t86~EYpB(5 z+G_1YyWiU7ht@tL)w_0|j5e&50V$oxgY?3N{LloYV}X9BHRnHd!i%3*sT&nch1KnO z`$lw*i*W)O6$l)Wwb@(8xhV})ywE-8bXlRXru})X)|KtP9+CaBosE9f3V)g9q)t}- z5J-{<;~NzsFHxiUB?GHQ6BOZCev`tYWKb8Ud8&aC_4zgbLu#G83{|E|n*4TZTYhk% zRO7&o9H7%PA0Gf=@hv*FVsLEE?9Fen*s=(}Wx@yTIEqW}`RpF5YbMvTYBq{(xb>RQ zp^a>|hdmlD`I*m_w|!=efe*=H6LnuTBM18ktKb_@#--0;JR=i7i0dTHtR_-^TITp zn>P$gGj6Hdr;CA;Ou_BxJ3}{44Hfmh`Nz}bn#ubuw>|xZ}jkl@$$|Mb&+eE-s8Lr0tY8sDJw&K-?OgW+6>~>E~gXxBye~r zep6v_{@BLz+rj+r7EC^`6&y0|)~cV`9irbh(%X-IeH(o7a~aK27;RZTal!v1e5V>b}nzO1D4l(7KA;tDP9ty5C!cRaZNWYtOU_qc1Rg zX=U8dgV;E|Y19zZvh(wE*-LeY{ezIn5BX9DT1VK?-PF?Gp22_p<@Z~P02KW{|9tEkYJ>XG{ zt~qy>qZ5ynEZmoPKk!Y|?_QL9DP#G@=e+a+;RA76SPvX#XiFK{A1$EM9~W%N)_T&F z6XunXa`nO37o%{UTx~aEKC%kWau~$=#$@GMkh?bdxm}6$qL0e4m&@qv9$QCbJUMrU zt@IMBfLTohnil&|9P2Fq&PUd4%G5rk>ec#ZCC01zY1RhpDu&Bfc==_91+THMeEs>} z=S5dtW;C_s*~}-|Zg&;VL2YRT>3b^cR=X}|Od8~Aj@drFd!}m_Te@-8dnefdvN>(<0lSS!gqt-BTaskfr;buM;qql|(WF(ejFOUq?(UhE6O!<4x9VJTM|QG=zr5ECniR&CIhsud z$n*ujegA7)ll!l1?cad5%l`{#yRxG4e;c%2QU1RGZI_dkRrt3? z^{GdW^r0lNXxIGH1*)PWU;6vU-xBy+0{_2}Kqy7PZ3x+4M=Mgm_<#Oo^M4Vo{x^Kt ztgI|2`|ko){z40)wb?*G9R?+*rAZL>Ej;+$a3!A8KXWJKh1&*F~R-YRWDf-;|`jE?x@lSEF&c4)PrOCjJu0zvCDl8r%+I^>m>dS}U z56HB5=>GhlO7+F$u->2oD&IzhK;dCb;!1|d?*xwDw1D1z#gLzZL7cumvOl>l-Zo3a^H%ZCY8_D z(R9?h-k1uVcNC&Lc%PP8==YM-!hH{2Yjoag!{vFRFN^-VB63?Gm+2b~ zb}MF>U=wW!ng}iPz?_XXKV`*P0%PIa`+ZWE@;0oRD%FY#OKNcI)AfRz^3G8qYEr8& z2np0u^eIb*-ljBfem}=%kRdwn5ebzdCY;h}=ctohQmap*%M9B>Q+&2OM2BS^*&=du zsP5FsEErD)H+Y5(?^ z&mWMz!Zu0LDbrvZheSn%<>zg>p=X0kMyl5|eiZYXu+Rqgu*jo$FfJ@KL5iShXXjd=7x?t>#PLKEbO*}cBaE9M* z>{InLPM{p_Y@KRGE1FPZWobmUi+nK_0>P;bqEKd0#BVb@f2JNveXa-J1|ZoG#H-wZ zz~V`hTPkr~C#VK5JQDW0b5FoclGXn*u@-VTBK#ENh~!WXb9F#SOWTAEX=L?5qc!>o ze$m}f{`)2|Rm2$rs#pKUIb4+()7!>Wr%47zS%Ft5*&gaUxmzLiKtB9I+(Q>fzRwvt z*~E$dQdigr_<-V2R&%pP{I0$Y&t8nak&|MIlt@QeqKwPn1Aqv z15slQdhv_`JE%-UPQ#yQ924688a#}F<2F2Sl4DHulyOW}Ru<6D$4;86EB;U9 zlNALDfxUP{#KWv1k+4k8+wl5mI6Kk`!NMue?%(CUEzdnxpS@CpR&$+LD@+k_ks6Dy+y5A4?VgPVw zc)1_?RAYpo53$Suyx#JcnQcE-O^YgcCm9bRf*aUen6)K=tu)5X5LC}vfxa!?1f8H{ z+OUt=Ka)L2mFj6p$6YU^P^^aQCg^@KL@bXVC-p=6g_Hb`w_irplMY3K{Gh}_OoxlV-+`HW6{QOLj=-z&BOwiJ4bViqOuR%g0)*>s?jhNPI4}{xFa#?ZDS${s?@;NvMT>_U z#U=$?<`!|NyG6+;itfDr#>Nh;Aj?PQ7{7XJfkU+^Fy34PKa4VtBUc-;l$Z*OhPb+u zlM%Ql8;ZEKGaf6v;#LkORl~-aLz0#bWQjfr77tmbCL`#|bJC#95@w*}anYqJk&xxa zjB;|azT=jlsz5tMQ6_DkJRg~dg7`QlZB>0gA_^~#Md1Vb2chR66S9#IBE7xLLp8ji zDGI+e_^%JS5Mg9`&!FTqUheWt+IehEFenrC$qP|vd|TJvE!f^M6H4;9OC^drNbPy2 z@B!#g8thDqcOSIFCfvvc@?}iJPqNU#D9niD4%qe1X>mo+6tz6!JsF`J)T#o6?KWe# zm&VTCY$fp9k(G>a(p_|lf+iBQ<3FCALd_(Eph4xO4xt!P(|n$8Gv2ICuqzNbc~A{! z7@`7#@dN@A8@AG6(bjkw5s(QXDj6dxs-s3g?dINCZ?+^-1y?OTiTot%`zDN!89{|1t$y2U{DP(+Bb+c0wK1k_f_YTqVZjsG zvbW)3q{>o;Wa&_M%Q0P9iRY#+e#AnSD4Jl_)kP|iP4^ggM6uM_?xHrNfM#ru4(cC$ zS<=L*E$NX$#k7-VV3C_*hKv=B>mSW_h9<#UDX`fAhBaO8O8C$;GbD$4hn^qt69gg3 zla>lguynIhG$wJWH*K;<5jTC+h+i8kD(iQ@caZR;>Pxj8Zk!r;H$xI^+scJQ+c`>K zp7V5X|3jOUZ)s4bQKmcN5=a^p1O7Fzie9Ts_}j)WZsl3RcvUWA1cy35TO_Q>+lCa^ zl6_=yZsnhtuYf1!CyxvgHkxj`*P!@;rHZ+W*3qIuqlOSbIK0X=Bvn=pVmY8p=Yc5Z zixi8U6qQMqWFV@0-0zp02c)>eG?}iWRL&(G1cyXHWtTIoPY~Dwag&&!nVAAKl#{Ki z423Vsx}PvYuw{LrqO$`Q;q~uI495P)7!soSGsrn&6nQM z!A5m*L>XD%B%vAj>+?8Mjz3maXPpVpg7cjKh zt`Bb^$m3k6jX(Ez_M1$l%zLVA23 zy-UeyyaHN(H=f-{;)2ay9oHs?Uwjyn07yXxp;ATXVQK-WGHsN-5-=OAB< z9MK;S0`s!}j95|1zy?=T-MeNW>K96J#Foo0eVjRzX%Cnslt~QZ zMtl!hRv;r>14AbR>QNua6B3`_c1h=E0z}e44f|Amr*0{Q>9|GhQS}i)SpQj1$SVbxU`I3Eg5ouVYJ;OOo$#nhfjie7@M(#88 zIsZ}sgj0@r0rl7Z?s{HkHth33;fF@K&%pOT3MuP+-#&bHROBADr-HhOXd_#S2};kT zWCGd8#hDy#rn?*@Cp#*jEQj?%O3s1Mcdfl^6%6O1(RF_ml>%kD3~VH^E*&Fr=)6yJ z1alrx1EIJ};J-)kDlOIK2d4CEEVjX?ec z<^*h{go)++gdrr*8MM!-eN_aniY7<+CkHZX^Kg*Tpn*yW-8qv8QM{_MJZS7z@-X2i z1qezBEu;|^jYe#eLYX8vB1~ThaK$kca0flluT3E3iKgz{BvX#l6$JUvG93sM9NNE( zAc3L6pxr#OhoJf!l@h(>HYmI*3DfdsmfbcI_ju}`{6@xR;a#wheSDDye=%Np+ySOsdpOHK%A0M zbkA-F{r-wlbh!*7nv(^POQ17X*XnZPJxP2Uj&_#pr4QuGs|$48=ZocwxwWTEy-DGW z{wAy$QsRoK1jB0dl)D{IFfj1=qyEK;4wA>k!}5VQ(+MiNuxcxsqT(;=)n|>U#JwQX zn>CU5Q%vYP5?EvMJSjc7mm%<&UWfs8k#kz>V(}-_Pm-X@w$Zpm&PBz18s@*vzTE0Sgfs%n~?v8@|F zPp#6R90ing*tCB+IAsds1Bk{5+p~9`Kx^k;m?)d6pLGYB)MGh6#V5vy_O;jSqKd%& z8)HVHv-ELyU|m4>BXXI=dFc6BlSkJFz+4}WxNjZf33S7jn%lT9jeSefnRu6z)%7~L zHz>5*+BaZfg7PlAXR?PcfJDv`XzD9Bu(T|nY70ixaCOxF$*M!=8E>{~*sEVON?;~- zp199neCvQh)Xsh0Jo`3`M)Gq-?^Hm;;T#%7fU0|}7`SCD-jC16R z-JjeuBrTieogz3&n!E3mF(vyt)()Y4wcKWlXczl}tj{C54VUzkUNF{j(3vs@ z=G#B|h6~I(vsZdVp~!-G(i}c@lJKd2^!l?}O#6w%=i=@&F(-4GY`&Lh*5Y9uDEXxV zYl++RAp5qGLQ2bvpPd=>2xX|nOq-+`%zF4?*5vL+!d{Td1(k|Vql2*7>@jmTkwRED z&Tk;_b7+42b@8oeucDu%O5AWGGp8g<3Haiw=)7%ALlTgWU$H_lueKsK4y+NWqS6IE zizt!l3FVN>AO6xbj)T_p}_`pub7GtjA}HyWHj5@$puH`*jHG-c?DA% zK#qKIMl?4mP@noJC|@keby8GP6q^8;`e^k@7_@dkp!=PJr)}KTM$n+9RSP&(QPw7j-`foc;@_@3l6rgkdz{q*4 zVduagUHky7>{&KDHM47Hcp=|e38-#eKgGq}XT7F>7TbuQBJ9XXr^4z<>TB*NwCT`c zX}}1;Ezb#3W|;-{*OX(fO~%34 zLbGAd!ECD&EK&`I4aL*F_+d3^R3SPdug6}HVC43>2&kjK`e?aV53uyLyxQh_swtP! zCyJypOIb2!2-L)R#w4C|OsPfEnC{?iDyFN&f(5D%H0e4DoXO9e8-d5k!A z>&a<^KdB>BVF=8N?;*hlWC(`tA{#p_(m$l+9nPiw*u$%4E?50v2)YtQfjan!(-)du zqRy6yIx5G#%CF)d0;`)hT;@&8%86N5aG|3S@Ukx$AyHLbcOvji&9QHJeoWZ`9Q~s6 zd^kguxO4V#Bab0bFel(U)~uJq3qFT8>qwdo7Wlp0>=a|Qj(I{QCqAEc?VnpyYs)RP3uII+qjSo@d z`?G=At;i8V6>)bdzxL>9EmZ?wXFMM8x|0U#y9?(g00hY8mvMN4|qoy2IO zX*OGoFW2osQhTB8@(nb8mATuCo38t6r!JB|gjvQWHadbOb74_;`3xw%Y>zt8LqLi{o_?6JcK z#v3my>hW$FG{U&~1qAU+P_bA9toz?=HQCp4|D_g9MXl|MF`>e$vSdS2AJOHo9NV~# zr=o@&?LAy^*fJqrpDR1G|8ZjWXCb8zuxUWH9X@h(9ZzwRoJ5pjwOd@S_u<6rpZsLp zz)`xPhUcz5VcGlL(VKa+RbmwY0WX0)3zkRMzivPtfx{~UDvWf0SSM(qB`0vMmOW?01;6Dxfk2YvYw)j7> zLHnOO!vBU1S_M@V)qlT1`zm-roJAXK28?=CxOKRNc%}U~9OLQ9YJWKD9 zk}Bg!^x=Jx7Bb{ry@_aN->sL?=FFp1C%kF=P>$KG58;of-}PL7&GHHlKZPlYdMwPr zICAf>`3Wo%&aTTR_?^$t#&9kLdu;4C!=k~N``#L|W53@xG3oANnSVt*aJ|n_wG|*_)$>Lukyd7j9Gz!g3wK~lgkE0=z|<-Gy`;3s zrZ0xekhwJq`)SIuTB-ry~PvP;d?gNGbjWARNc3qlqyTH7qbx`e*z#S(pP zK}kUliboBh${J6%I;FD%dPFi-)4iTs$9zh|15K1*jvEKu?9El;Kt2jDB6e0`2$-B% zkrW5U-yfD{w^eo#c5$Kb}z-j(#V zo@DM5*MBRXs8iPHz{8*8;m+rhSXkaZ(aXTY@1joq<`tlibsp=|VSr5ZYuRa8fS-?MJzqmfb7@c+pY#WR_} zB42Ls{O;l%?IKw!;2}P~DWWMl87SP6C(tX#iQF>jc%ildA5_189To52lCBNv!ih7O z$iCIT4fmx@f2`h?aIs3Zpg;hVp)INzfc~Dni#p9RB6Zx_E9jmYmv4@_^Zw7XP1XM`pW2S){`8g+~ZPs>Tf5qQ82o;sJJK#UiDZVCIdcv-$D1G z`8o9y`c+Y>&f&+U3tEYxEjl*!)HQRi6VZ#Yt9ydiE}~A&48+1UNqn_XoiDUXQ5D9; z$(VkoTYyn%lw!^{vsC$xSY9&jCB0GPbZPcA?j6|Q|LqPDJe#%jm7S=6BFrO>#U ze(E+p@WJq#HG|rZC+WFp>n#)gxyXmB@o4>Z7k%Q;IDqXu9D?Sg5QK% zwJ5pUjE62dp*-K1B*F9JghTHM=`aaqIOKSIh)hS_mUq{%V=OXmK3y(VeGd=|Yaz1gO z_c)xPSc*L(0S&dpEKK9!^n=2og`XY#)(yR3%*(qFMlK+@INZ3|NL2z0S1XlGm55AF zOLG-(y2U9&j{AIzIxt`rRxz1S`LotsT}nknt!1X3Cp1Vto=#AR1f9AKZ|!pF3)HQ` zOh>mF!H{z)CXG_^A=Pr~$0uW;9_mqg0u32jw(`|2xdvV| zE|ie2qdp1T!ty-*#1-9zzQo+z$t;edUnLuk)1mSDj8CN~ zs^ELAj}xO~Tc}+e9!fIKDw{Z#!K*Ttnqqdt_hYo;Z9Q$)BORk`-jtj-8)^}*nvM=I zT0iZk^|PaZ2Q>Cr+~oo$#5ZI7bKBC#&tab1EPb~CiG1k+dm);~t032IaSK0ql7BDudt*J`S3_!uk3pp zrfIfX#Gp-Tj<}0#6=cQ7xP+-EU;k!<3ahX21|R$D}B!&VR*Q) z1(~R(|I9So%Cg`9Jw=tpQa9JVYN`Gw`aUBR+LU&KCbB(&y$k1E4X(b{K2pRJu1k+D zG&QAc&5jt&RB0zYEm{8qu-=FMIVIU zhT3>Tkj?@!k>A^T%tpLN_`XWjO4elV zIbY-IVL=x0YK!9Vq#uQi7n+{hdD>V+!5dK-i(72dd$0w=BE4E-u6AzINUJ=tTMj05 ziN!((2F!0Fy6a;g^HRbwDTe&)319dA*|R&p262Pmq#}56Ze~+#weN)U4)n(u(cMwP zdQ2^iua*4h(`?_xrgC~+f10ITi>YV{J(Tsvl3Nl5ipY21%ub?}8fCZg_k_Jq_;1}C zXyr33GAPGQSkN?^qh^X2cfrLSXRtM znB?`;KW|1?i}NbWMW=EKG1nB;NHK7ycjpmOi^wJ2HJHRw?#wMO-sDUi;V`%j-!+B3 zQBO3|j*$bUQ=1Gi&}QZEvWg%+SES!siEw0{m5!1q84_5LGxKMLmYWY|8f+b`1@%<# zq`^IPW)fH?O=0vg(4}ms4F?2>Mc!g&lfm->C}3l5pUxm46jF**jFFB~0t?S1ZHfl~ z-8wzGn^-{o>Z{m^8$p&JWd_LIFj&8!MUND0)4(r9cP_xPDr$(oTF#srjTf=#F&8Rb zaFH=?l*3F$yYE%y=3!jEpmxx0A_A$po;Dn^fWLN-g3L0qVzajf26h*F*q2<80xLQj zZN;Da=rp|F86pjCfj)YIBs@yHr$ND=BF2I+($Tvxw#;UGi(7P&1GsD_qzaNbLt#$& zvUJN2BaUefG<~dOVVxU0f%a<{cr$tO0Jy9&|5bn6n+bb=VdaZ zKVr>b{lZt}8~DolHE5%4ERZY~E^sbf07yF{om~w=KN6r~3Wgvsy(~?DC-Yrov~ZE$ zLHli*stdR~P$-q(+$bTcB)|7&Mw(Tep*%}|lX@ycw7d+nh*1q5qWO|VJ+X{Ccd92# z8!2UFn4Q3e%%f+NXrgXa!?;2v(AXPxF*_glu5Ml!EY%nOQ~V7SC%~%DbymspzCf#T z=Rqf?y90a64QrT`?w6m1t@^b&+-!|~LRg2gz&y)NQ+h?Gqvp5_Q8N1Z@KLH8KLW-m zY}z1A@alkKKiwkCZ(crDHm@=>K-YV#v~1PL?EoWB~sKF zO20~aa}~H%8xAvF0nElGYEqzJ%4WnJRn)_LBH|6?EP3<5hhi%M7`l@Mq?=!Y z`Kal2c9^ag$UzvTDbRRIq;qcpeYhDknIGoF2%Odi&%RvAapI$}5k<-(@o2i}G!tGG z$@$}PEVO~l211MOrhPJyNcI?hM9m}&o`7ml1TRLA3(%tfhiR-f;*ffQUyJFl7rm7J z7w7u&Dsun*MK96^Nmeoj=lp^^F3K4AxdeIWdAMD0_mIJQ_yN$>wF3rv4$bpKlxnBkX2hB zIq316FOU9)oEE_&UV^+C%vv@L#rC7gR0EFz-;abZnvFob19krVeM_*1Tfs@n^Kcvw zLdOv;-|E0Gx1<`jfMqC1UXq*fWH_N&m9=BOGFvQ(P@o;5 z(-gK*>=boua$-eKN^e$gSyS1x(KsO^Sc(8udT}_)XzP-J5~k>d1~quf=1m7i8Z84P zoH1fn2xd70LEbWXLBYis!Ax_5`hM<>?z@@Mx%0|Tp5G(u&ZS;^5n4Aas2 zF(t-^)dJrZTj_nG%gAHXsGrngwii{%N|`K{0{U$1%nk~9Vh~Q;MMOnAWIU#4Q^!AA zQ`uST8jUMj^5k!sNDNIDy@d;x3o_ICFu#;3ik?v_ha62;Y*8%EO3ufDYh)~1?2D$U zZOq%}=ZRtR+rVQ3Rez!DsI@?7xQLkNGadPyJ z;lBQce7|m3&=hAe{Ma-eW3_OR)IqkSq})2}m8fG1+vtwHp}hb>o-RgzR3Cam2nj(v z^16{v%}*2N=Zq`j6@A8xO(l9_#|G#a;0{52p&QK?Yn>;12Raf5}s6Ph7Xzs|}+W1*9Io=xLodq>?p>l=i_9l5P(JRVbmmSGPjIQf@?jr|?qixi%r*Ybp z#1$OJoI55)^@j}JT43Rn;fJcr+_((dc(`A43Y7)pSzPzcq=8yzKl$>>;%`6Is~Y7j zV`i?lf2)O8HCk4s><_iROpx3oTZ&_l9;~2y=6+2ggs- zw57WTdm4zF%=P}dc9bhMf;MW}lw`J)#pP2M zq2W*Jx%jF$!zyS-1Y% z_^>*Z1?hi4PH|1l`WY+bizBMqc$Z|f^rBt@+<=>izWTnYrg0X696{UpIlmb{mP0Hd ziv4&OTgP>@8!d3RKnBf@B23<@>J0~A!o=k#@)jj zdNtqHU|MyI5XKYTwyFCD4i}VYr6hBR6`0;q_#2CDy3;eb6u+XJD6_&ctjk%P1#$*s zRVC=ABBXv7eYXnZADwY*XN$=J*NC=x6)&a1!JZ?PvkZJ?PuXr#&r;DwAx1u7s+U57 zz`{3$mJd+4*jKYWbGpr@sHr&jSYkpg9{!?5P=Yt?L=7Gui50lb@B+(hp~I&g)6lzn z2FK$N;MrJ`t=CRy{UdmHQF`Fd=KMR7aXZ%d3i$w*KGBORma0~m4n6Dqe*XOkP7Ij-GLuf2r4*FewPaDOb<{dOgqmCsI!fOUCg6Xbxq?=9yL zMcDwyaqk3{wZ~4nEc}IX?>Pttc6*AtD7BB!Ru%#WDktF7;duRO_svk-1x-4ThYTs*@cxTeYYQ zXtfLmb}N@+v|f0{`lBh&{2AY3ulPo|v4hLha<{T#%~mG28TT5!&?%%<#W=M^CN4(t zA|4(^FJ7vQ_1nlJtcvT;IpAg3xOE8y3)1w5BqWGtdYrhRqi-rTOT!F3thFU*+);wo|<9c z^fZCA=*#XI-JeFRvjbzVtiTo8q?yzhq+#QJa`d3cH=#IhN@se|TDG_?E!`)*$cubV zxo5!id)B12fcc^!qf!#e_X!{8IUwzYWsEPGL&D{DvrK`OqcFjP+sSC6t*vV_l>Ul;??VqdZg9E zC}rcrtztbouF08_|3LKW$?l8NR|6Mx#kJlW_BGOGr~K-Ml(qa#n_d!=O`h)9?R(d% zwXZP_P;l&^3N zA{SPneO8yuWu=nw0yU*xhu1)xQOm}c29jT@ptbt?As221hY&g?z0u%D$2v6hsIRfu z3UX($|JLHMEqC-g6d4`OMRF+WY5HP$k?+A)Vutq)og8PHX+(DINC7p)k|tB(yD8~eY2zmu z1-WoNhRg;yn*E7naJ!XOP1zGT>u2vAZ%^QA1%d?v*5kNGrXp`tX{pazS`(VBmrf<017vpzj#|F? z1~p31!C1zW6uy_AeO9}G_v2;AtYVq_Qa|{xj8Zp#_l}JH6r{?#$Y=K|7TxCbQ(j}tTet+}G4*c@Ui=4esqRyO61s0z?u}*EJ-ct*P z4~Oe1L}f_5J*f`3d!Ps{l_roMCw{jD)aama?{*@Ze>wM7Hu?9@UgSP%5PGg~bVyiF zfYKIxsGggjF5`4kj!a)nBA^JSFT>l&mR=hu;JA&xu53%s6Zb_tnU_c!erK4EksP@{c@av0d-W({jCjGbfJiSnHOVO5IfAr^X=c&(G%-|UGL&K!9 zS`||p7@m2lJY~e@UO}H+b=-S$Qc}nmH!B`MJDYrZRUY|9e8Z*uGNhoE9ZMN{re}Y6 zp5D(8FwVS?z@<;|^LLsuTYA8#-wM&eIh}GTE9pJD+xl6&G8bw={4watwn{ZCFE02ue1>o}sO2vy)(;mt5s0Y-KQpxkm-`Vg*(T@7RmGN!qed_y& zKCUJY<3WE0eLZOGlE&o$Qiuy{g)8()^9>VWPyPld8FyX3+LDREJ%Fr{@b|5I_qOo% zMV=0WvKVg*wNASBNbivp|MPU@VHrW><&?fx0{)D;gh~6F3xO#mpK`7QjFM#8@ti|G zW7}HV>?e8up1n7Ti>Hw7)6LgVG9z0-9!RP9LC^d2tta(y^)$@()an-D54^~uE@h_- zh5M6( z6<=EN$n$HHr+M5t`bPmh0rk{7KNqD04*W@2|K@)wPwb@!y@k)PVwtnfXr!FGtA^zl zIN&^!2$f_nKqM4Se}r;Iud}45$szR5f1wz#rgcmjE(JvV$5kR|v+;i+VTblZDZDT@ zd*ygjh+pvkyh?=lPpU*B!ovUSc95~4Ug*p;ub$!MkpRAc6+NpK40h(oKwwsV#egZ| zJQHQOSEEBxt%S_>{GFSfCI5x}AZO0h<{q6HZCj3LsOoq-{!TaH;W_QrW&f)w!^?GT zvM;4xogwL9O~)GVm|U<69BzoI9R5jFD^x_rPhWK7ikEK(Yuj?dk)F^l+2q4cR#wWF zVW!8c?KSJeH>f5}o{P1=3|o<4I{t(>cz0p9YmH0P-D*N@-e7py>`F=;`d;29-@=b& zGD<@)HFnI-s}rF_PZmu{X{mF6oM&qz!1NBvzGbo-yIKwNG3e*{i$5y`fub8)UcdFi z;hju`O6ktGq-Wz32XlrSj;rqJW+k5)31NENkRa?nRFj@@BFJC)tSI@#By>$!w)vMX z)|20+=rlTVR|As-4xqtFj_A#QbS`D=!a9*+V0rz7)Vqf-lNbyUEq@p0Bv-WW!rci+ z@Tt3};*WkcaDP+i;4`UBnv`xX z?yJ7=;vyQA#!J;FbdIfI#>F5A$6BWs37&u^6Y@=mXc?p{s!Tl`*%tYZ8 zC_DOW&s2-@>pon<4>c))-*HSsIE%Eci>1nWdb5UeD7NsRL`dA3w@|{bA!To+%hz6@>4cwOO4CsUEJ2z?I1j2$dN!%nlXTVEu(G`l zo}(F{qlhnA{YCdM5zdEF@r^&abVl+Cs>pr`NYi*2gqJ7H<^<#u-H<>UYE~hny|3oX z9}&3jx*=e>EgK_4raP=sqMD|UxlDtxw*OX2IJ%xsG36p(|G4yOn z6?mPlT0x3Num7dFlTmE%l^%O9?>YYmos|{7=4U%UIB>0zZ!e zha(tG6hIw`Z7ldMBL1k7P^*g-?xTx{Egoukl zUqCrI{^2_!=9jC+NN_0EYONc}S^(p@ZtBIkG3cg=;~2gyQ71S9F2iiY;GG0xZ;oNX ztzvS0J?d(bXfO#aoQsw}Ko_Ix&)=Sj2eN=Y6+@fCNYGy)?N*|N5@44Omsg7QDkOA@ zlWUk3mhaj(Ew={WhXX$+jG23JpCAe1x0H{W?KqD*;r-yY@T6L95*ZHtkU0r#BuhK^IfVl+5{8&K#xRz72!!l_j^=!K`vwg#OoV-)aY z{T8kuO(uE~$wkMn@jwf@_w#vPICudC=}awbsfOgYdH)rKK_$>nVn1vogGlfJ^+3~$ z9~1^HtiUcr9$a~QxUMZB7A#Cuzk8GIY7Sd*BzWg?2Hbu&ABQTEBClmu7$h!8r=ThO z7fr7~ZzrR^t)E6-%7$~}Q@=18j;>Srm8f`>j+NFynFt{bkL z8!#viOat|}aXNy)N3Il<8-$X}%8K|w1C7;v1H1J2qe&85oKvAi`T4tmmUp*G)`0`?U8-kb{8kz`p8~q6JX|NLe)iJHtqZIqrO?;@{U9$ATtd-n<9ZY0kJQeL zKl04A|9vJMPVh!^j2{gvyMScN2>+OWj-Zch1$nF9aT~C2+W*{I29Od#or&COtt&`no zTzs$s$GLq(0)3BxTfi(*_9JdM`OM_K;yg|HVx|O;tpzCZi4uJPl$Cg@a6?vp#8?_7 zXi@y|8=OxAZ=mJ&8X`UMGRKu?AnA5|2hj$v`>?7NZ)dL2{gui_&MWJ1U(P zxq#WJ|L0@pP3(H5LWl#c&>t00XT^&{7?!I$+Sl5faHIKYE^Bz0Cr7 zOhOQ_#+rhDNTCeur+{{!zjWgq(_VTidChK-Syt$B@M?Zz)l>w;fkjKAZwy$edVyW| zAoWb;JID)F0Ct5+FbEM@Xb%s*Ne-YcAGMN)j`;Jo;qtaYtvl0r&Tc~O7;SbdLk?I| za2xPNCptch(Z}72fW`yw$=R@R8aIxSgt(p}1AfI=xMsfe6!4Nw)X7%EK_gYiJ3OPW zOg)YS$Ns#nL(V3R*FYk&DhRazN{z496u%{6@RSfvf7C3-faR*ibLKmomtu2-b?e69 zC0dk+w+hhD9iA1tCw!??ZGzZtILpJy3UvxR&&d;mI%UHJIubbm@e5cBt6Xo*vkBv8 zm7wW{3FKA4|9FfKj{(=lA*`1g7KDzUuZEmzBe*7Oh#NV&F%bo3NYJmNWi`N7fq&%K z>V_}Ul2xaFkVmY^KfYEM9|I2ffXB$~2PK{)<9$Ph#RJ6tX*jN2@>IMR!m{ikdx<#5 zi#Nz7TGm36O@n_C2BaRgjiD#1Q1|W9$(=2BGS6!vRdaiTfc=+EKRmYQr+9#eQ2!gY zOTTI|klHC;cj~s`>e&#=@X1=Az;yNEqq*Ndd;_IH9#riWm11}%Q7wDL<=p`vB$3;I ziWG3Q=9obla7t&YP(7kvOCrr6rfc{%S)f7IV(|kq?lh1KNVGj^PwZu%l+Du)Xad(D zR10nU8|p0G}u~>A0q6 z+>E;L1K`&L3bKwO#j`39&<rsv7!%FK5-aS#eLCna$Zv)Z?` z)PK%b=_QfNtn(4o@!;YGCaOHOZvmA7h6mP95!znTq z!BZn?OS5qPK;%^b`fAX4M+j$=7AxWEZ?*bVfGq^tM^m>3gNZVOO%K&-ow^XiB*J534nqP_!IM#8=L)QdBw zaDgWp)|Ox>6&Nob7eRRz4Y|*1AKz&;lA|M%yR*XTP4T^%}bnZd! zaq;RJ&()kUC|tV$5tvN+cPjsSDH3jofyk?0;6Z}WGp{D7wIY210v8F#ox8?)%33Yq zzZ?CxApUP7!a@m}76Z>eZJLalk=&^0Gbur-J5fR~+%^1neExM4s*nrNq;8Tcq7j~dX z23_(N^!{`PIx$DvP6i)$Wf{G{pNwvjRo~Xjb_D$njaPO`En1D!jn{B)lDlOw;7Nwt zc8SF_ZiLDK7oP-LvwX={AnCSNUfD(5ey|gUcQ3wRKc%m zX4CvW6Nb$3tGRSuQcGA}J`){K;#pw;MuP0n^s-H3*cSl2uIlAU;lDwi2*;|Y=btFz zBT`Rh`HGSJS(aef-XZ< zeK4?8Xx6`Y(~MlLPb7 zzo1a}v{U#Wswg}-ByoTo};9Q{mYXxAxgkcV@L-*ZuFN1YF*DJXFd=jj~L-a;gJ_K z!QEd{IHgP|c!f4Ee$}`3p>MlZn>Y5_o({JnfbYlcDscdK9bp#Dsx+`%i-kpJWq`;5 z4IqHQE)62%JMui^d*Voy%2fm0>R||Iwuqh`Kl{-V7|MRZ{+-0EO}WF#|G+$kIFA(4ltZZRkbtRc-|)pgBOCfv^Uac=1PamKeHGG5NCRE};FbT-}TIgi7Co;LO|29$I z4u`TtRLoHBttGroLHn>c&bYSaA~I~O4Z69*A(Q3+{Qz+J(BDwo1ipFY^iB5^RRe0@ zbq+49U}141{X!3O2)Npg*NxU009T(SoYS46VobN?13)Dvk< zT*$5c0e*FrgXmv$y0cF9{WdX|2h@uEG$~3mC*KbzA{P}XM>AKWKwFj?gF@ZxjBN|% zoMS7Fj^olZit{193Xt2ye^a)WfE@Dh*)rrjWK)2+mV9UVSL0f;%gET&vrw^3P@Dsp z)sgky4hk`_X-uI1dF@e6Jr8)zf*D7AS~IYTW6mIc_AF7#(Uh+XjD{e9thpf7RiFrW(mk)YvlvIAMw%b!Je2xrz0VD>fh-iwcYA$J=4NRr*anP8N_RzENdulrAkpJZ<%ZOgVbr8!unK zE9!l#Ay=G@-Xi*Vo4EY)tlmq7&tOC(s1YIca|-Il@Pf*w1^ROu*ph{wjZZhORTMW< z>l;O76$u|DzvE80U{^Ke3uVsn$63OccNOO8mB40kKER$-S?G;ESN{_g&s~N_OG~I| z#53>R)+fen7Ph0>w>P*x>&;0vX_YERSnfIA6F>1jU2^DrzqsOf9AkZ2->(*Y)85JY z%SGsruh4LZae&`RBKf&y{aU z8UTrX9(yI8f)ow>|MTDV)x!!kZi}PLpYplcf9Oz4QXY~P&#N+Hbxs!j<#Mx4DdKdp zBhv=({C>*0fTH@6#dVpC0Wg+F^~{~nh)c9Bt&MhSb9~Kq89V#22zDCihbQ-%7z24u zj3`9?Zbbx`Y)xIdI?tG@+hq`9{Fal{qX z`RPO`kR$UkN4cOQ20BCeiL8rX1cJ-*u;!p9cqCHbE|lI9D4xfm+bQ-9Jq0)T9WnJ= zjDeB>4d;u_?kd-T)`sp*aG|T<3McyIg8l=u8KZ@l>03BI#F4gO?X#$_83VH(aK$pg z+E&y@2^qS~e1T)eBvDYcJtbPQK^mshr^$Fi!FL_c`Qn*UGP(h-kF6fq?YSdN>5i#{ zUe#CLh*TrR!80koNPI>Zt-fzS-e0AVh3QNeHFNhRbEO6gEc|58SB;gx`2p4#Y0Ee6 z8|_+?`bj+K5w7q->mnN32QKg;PW0-25&f^|Ek zXm1)~@clqz_1f?qQssZW$VgY-@Y+lWAMgu^7z6VW9^cpIr$vOJ;ipr?tY=iR@DJbp zSWr67o*$N`x)Az4)Kc@O=E#qyG%fC%(xVw^ibi>ta$j?AUHG|!tffoUswcRGz3SHe zED`H6RPe=lTl$uR5(C+IV_)Yh78@a(q0iTaqNEMhtWYEwj7>Dx2Hl_d+_~>IR7B`z zWKkC9&xB$27g6Q!1#RHE({HAVR5V{+pRJ>Dk7-P4Ukx^?V4@Fer7s5<2?eTUi+-U*5 z$Edp_jn6f$%wfI@HOCCGlsXWtuw}IMK_cotkE$ajH&r5ZJlgp{vA0|&eXCo1T@&?^ z^evPL{kIb>8<|K|aww9B&u1T=cE~jIx1IQJW#fiGnM~CZxHfEui+5^EuDGX64(h3~ zeG+%=?&YX{#@7l!6i3EmTr*~K&_q6Bhc={k@3v<%J$=}M~RF^4Q>w7{kf#94wVwV0n^B!=i^T>4R<(3YMC;E zQKYK)6rnrXRx@mX%EwsJ07>N=7=L1ck@-U9)dWEu_Dm*1mZ*ub?VZN)Cr}Gg2(J=f zP1_>VWX+n^0mf3Prahfai0P>}l>=Ws5(tEDL@YE5n*eOuI*n4NKqh`Q4Yd3l_K%NG(t$m{I+H<>eI$s za50bDZbB}V;!NTW!?}pLT9`=oF+(<%P@AyUF%-m361u|`EV|~0k+C+U^d@buRMpo)1*8&4oe5TQ$*v0_EVx@Gq{X*grUrUw-+Uo+dfj%>E6UH4G> zMMr41l(7`?tDZD3A+-|Rxbm?VGB^=&ms?I(#7FYpl-Qe4%}+NP19^z!^Je4+{gr#I z%*`Q#egjtI9(8>-)I*Twc+&rTAhot%eFF6sF19&esH?J`DYn(&XAfbg1YnRG}zyQ~bSgh6hCCi%)7iJlw#S$GVM)A%$YEG+~b4bUUSs>XEBq zXSsPaR-ug!GJDa7KR--|9*@U)%L(iL;hLe$F#d*n#;irl?ZauM;mq7r|F!pKW>_h0 zmXEV9BV$}@1${Hte5ma;h1NYxK@jI16AHuvYAExIWU+WR=>TLum;T(nCs$aIBhC42`!IV*4Ugk>QL-xDUbMc7wNb=-#FEi{9$v|yL_LNC8#HZX8fi_KNGy~tLCs7 z-Q^!jp3Z$NGst=@!0q(JCM#ceZS_r{&mQ6$XH^6PAC)tvM16fh6=`Q$YaYDcU;c<$ zt0CpHz`+hTS+KE@_8-}O1;{rPiZ6Y!!DpFJ&6%*0lsAF(YDja!Zj8luQYuo|4o=u| z(0^QE;M=$N?XU-~Yci=?&-$L-*y3$Vti^7}I(*Z`bi|38eK*Kyr_Utt@|rc5s~ZV4 zd!-)q$2$>12Af}WR(mKjW_GZpYGEPUUD1n_&}X@CHpVoTYuZs4%^rmR=31y^Gcz05 z@WXHMZ{u5CXU&cdS`&tt(>f(D#cRbi_)~kD(p|P-BC;2z;-)(u&sEkWnNWS)kaeT@ z&^py5L)nO_C}lk|5(p)QZQ+KX>83YHuf02-U9Qm8<;e|m-I0Pyu?3BuSoY0A7)dkp zYc9f;n20kUy7IU=VV^0~5iTY;5JOH_@M@_1ED|a5t(n_FXfig!zaaXvBq1~-G^?Sb z=YC57${>@u?1N9pp~^DQqbo)NV`bn%Rt7C8rE?-)p*xu8Lqu@zg{Pu!h;D>O-gWk; z44UJ2=+4;^@(-eSi;-%_6(Y272u73I9?99to>E0ETFKYh5&qFn3MF_Q`(Y~@*BuZy zei#Gv7#hBi{R7gZ<0gMZc@P<4IhculgA@~0aOceitsJX5P1CBv!V`jFmtsI)fr39) zyOQ10vYvS=S7w4i;Riig1ws?9+`R6UI)2ky+OnQg%6x{6Lv1! z64o@lRyTL=m*eNasvc<0xs-eueacK13xjxsSh|C>hMCEd6h0g2{9<#}Cb% z8Qwg??Q>+~?=dC>I=L5^E8?FK;y1DpUn72~Ax&fwDa2OSTnP!Z_3m9v0qhkBPV5l# z3aStiO0ozfl-9E8a=?@-6E@r`pM?03pdr;C%hxpBbk$`j*DnBp`-CyZd`X8Rj(+7; zxGsn6;06K*zA?VeT0mwmX+TUx*i!#I!ywwfxm+5FFzzb2O6Ea)f5W2V6Jee3L1J0s zPUw9EyEb;W+NdS(> z8OBcguORh(0Ca^w<9z`m!u2?Q40H{W$%|B;)uo^Bt&-rsmOoJhMb7wYMbmU8?cncEvC_DP5rbm!aW zctktTH4|`cUdt_Az#x!wEVmy!#f~J*myS~7%fnzFh1U-Zj)GBAn2Y1gF=sQs3Y&#I zKs(DfV<%VCj=CR9&CO`mUNKw0b<|OJ^2+)!Rj)w-JH06RqMA-s+_4{P#23l~{Fr4R z`$FBqj`<7re5ID&fguk?43}XAAecoQ^m|*cjJpJ+$_R{di?}LK~JdM0KK5&wOtP;^<%Hshy zQt?;gx#W_jE4zu2#xA&!eKZnhl_WGyoU9J?Nu5UuO)8Au&JnYvds@$ODe+auGpjXy(HVy;yvMk97B^a)ZORy7wr5k~QrsC6>$ zCM@syaD(wa6enKmzZZ!t4otMD$U_S--VkGQXIFtF74}zBMon`HGluQvJzV}(;H4@H zwJ~p<0CuS}h~Hzr+mtkjY>!F9^vJf|g~C&ZcFB^LsVUM98k|+Al}4=n&iBTMBAST4 zXEoiFVlM)s4i{Ss4{O%%Y{Zq%Sbpw;xP@LV0 zB{?XK_(LzBFSdQs#+-1t*V@|{F@fpJ#w?;O(@=}tdKY0rph-)FXr4+P^AnX!MyHV$Bv%Xy6Ds@rHOO>OW>ELy&ne0(wImo7A`6K(k@Ko?fC;fO!pt(mY zbpyvscdzR~6|~0h+vCc~97BcRwZ)2li0_VHx+)s{U|0Ok=;PJ%b6ClA6RHF}GPq?K zsC3E-L6iq?K6DCh9%@RhjW|2+nBYch-si6UtG76sM>OO?+U@d;l_h)Iw9t5V5&`I# z46&is;cQpe2QJQW1oVEyw96M1ba5vWGz}0{=tK+V0xvVQ+jA4XN01rFE6sc%E9+zS zMVf}nAvrKFHC)|=cBxI3uF8MHR3G{$TKxFVvVcBqYrO(p7foyKlhgBFv2CO9)Emb? zij+XIKsUYi+?R*8Pg}Hnzc-ZaDw9`21u$?jVRoq)s4?9*A-nFZk)H*sIMLqEdfm@H zs@{?m-k4lc2+-S7_^IwN^jGAM^9gEHeBumcOCa$BZB4M?Qz<*>y65#PWT}OuRFyrF zz9RJh)_2_h==&S@ipGj{Ff6#`LA$m*W@f-h<4_6d)EFQK^YFKPNR8oVvYf3`E-} zOh$PSDCgmSnb67x1v=+LsSxuVw%wUolsTBkGTN(8pwp4+1|w+77OuLWSynXo$vTN! ziccUyV(p(1KR$_+FM+r=P5X8_{}#{v^80dF;U$q26ox^5GDR(MWg)uqakBmR6Yb3x zN*^muCtQz32miTOCFR}sI>8mXTP@Zzx+2zEB`?z}@(5QA>6?0jK=CqLtzzdRIY;;^ zA=b`OpxH178k5hro}4m>BiT3Be>oa6f~M{)v5{QO=M7QX zB>hL?58F3X8cY7FtLI^|gphm%y+CHgu(!o-1_>v9)_PFv#^}Y%h*ZmmCc#4VV5ePt_qYvY7;()L?G7P zQ}+dsZ-nz00CUW3yS(S}srDYkBoW+iW6Q%RDSn6ny4g^X9QQok&)P;s#45+n-U#kb zd{b9%4!}J)IN!Pp(X{Z*y!epH-qkht@rZ1Ut!t0>63mKl!;`SzKRA+h?v&2yK&@<89g^}ODNC5 zJM>!9$%hdU{@p39EY@0{E@R}KO7kXLaF^)Ksk0Pf@Gg-4=?_}}iI8l>#(35T_8Pkf z_!?B*bj?bIF-Dx9$zY&Oiz#N4)S5_EIQLlTV{$O$5Z!LB9@aW@%)Kg#+}qt~y8N7_ z5CMIklpik2Jsu^>y_-(bh_MX=5mUpMDZ-isjL=$mU-hKRM5y{pRG|=jo^mAm)#juT zMD5hQy4@|?Wd9Wto7$-~H_iRYt^DUE#WSifu2AI`VFvkCW~$9CRk`VGamJ^q_Twok z0V32l(oOfEWK-#jd~eZe(enVYksMRW>Jj&KY0jT#sF!kOikku^m}g5|pSlWHJINP~ zibC_EDFvqbMS|Ov50F40_u8GJfF-lioB$C_Vu~2aM#mh>80D7A+`tLe+;W7y+V<73 zkQbTKnZ}c&vXgIGMAG|0ikhYN^5s~ieHvM$7HeTosOC+0GzNJMh>L`&b$Pev!fzTQ zg5V$6Tbi$9@|Ki1XsMX+f2>gAV+cr#Ck?GKufj{GIU$GsG948PwY)zA>FNfUeoGgq%k^UfHExiOXYWuC!Y>k`Ja zP#xpO=e#*E^W|~`UHQpiPAU8@2wmOZ!B5#9W3mp|TY%Kd+QL2oH4Q^tNvq@8Y zh}_#yWvAxyVSU=rs|b}ABnQ^DL^hbO+s_OnwVDr%7Ct!e0 zdIcSSf1Mle(Ir~*gz&!l@CPKbXScifunwzB#=h%Xepub>_HJ_C2)$+$p;dV~XI=Fe z@`c?uG4dHRr{uvnM4kUMyents7ozhknnmJWI(gChY_?5f#3^ACs^%~iY(4IFmkCuX zwPRsD^nFm*3bW>RQqj@YrPoEqzgK6N#fn^iFnUVr3t~!xGaDlchqNKYP_t8ieoP1r zZuMx4(0@U=&c-eWI|(AWMMWK&T7sE5RGq+;I?l!?K$zK|YB``TQwtC|aU9s?JhA<^ zmNoW8ZdvkTL)oU{$GdaI+@E$|`X-%O-O0BX?svy{|7=mga>7o_R^_pZ8JjG6Nng5UcK5ls0bDStr zhZTk|g*z9bwdS zZH@E(yk;yr@o?SW!T&J-G`20A3zK@n?7Erly4lx2_D2PlDsT!C&PP}u|FG{#7EUT1Ly=M6086JkHB8+8 z(DWB$pu@C?KP-twiq65chf6fEi)CZtG@5E+Dw~+Okm~l~>qzLNM#*M(KKfwPaloYOugnyN~EZ=U;+d znHR6%({GmSVv}dEf6XzUnOqk61DRx(c{&~3&e>C$Xp8{#DqpXq@=n7r1tA92Lu0S= z5?!!#W@E&R7eUO#N(8OGr_*8SraQpdkHG+k^peawgvvF-(@U6_U2%W($G$ZE_@di& zZFSn(?5E3Ptfi>f%;=IT>}SpCXmaj$Jq$$*HM_f)cO_d-i;VX!uOdF((?|aquM`u^ zRK3*rda;SY;#QaM(@%+r1>kzv?A`e(cB)nZHqOz%bH*jhK^qVG|J^$>Q@S`pr010yJhNw3$bvuRl1&P|v zf3!7lSqO;ZS_@-|+Y8M+X5@atsF%SBfTs6yKg`uz~(NdlP1UvD$@IJS%D-^aYd1JN4 zO?z6MMiu0vY+g)F1TmvaM3}wndDp|nMQ2u4 zgQ~pE`|zm$*{d_`ra8e(1tE*IVYhibV ztM6q;(!r{C8U*1MSJz-J|4tQIovjjqpcL}9!@?Rjrs&39C8 zOE)f(z~kz&y39D#ygj)agSiz7gGpeLuG*3_w2Xy0v<{c)^0tO;P+UP#CB&Fgbs7=R zuZG|Fhdq94tY|B<2pIJ6`GX?~P;**BjPS%|8n|ZmkxDG&spi^6J1F9HV4YG64T4!| zw8E5IT~^;T_3ue6WA?*;pArEDCQ_>7MGVHu*d6Xy8l@7;y4z&1>~0NZK2S=0#3zT< zP7fe)NE&3De{q%UU^mSr14-TVIDe%2XpHFQm{Ru1 zP0JnhhgcF+N^;QlA2uWO(bn_ssruMO)I{8SYrV$T+Va@>DHU@>>`klQg^k~|vAJd2oyF_e zro>UPYcwvJg38q$OXGu?G{$MmVjw3?ikXwQ)kx7?U)v40n&GwQ-MQtEC+H}7q-;!9 zM&gc@oU!~zD_`ciKGBFId$gC9g;v&i^^LvOCz&6T_jk1lM$%WI-d#1D`^FV@nU1q^ z?l6Hu>{izhX4;@3ToCh>N(_mOu`JMRV>JA6?DJJ?@1<`?S#$SQCrPu_EQutjXi%>n zC>$xAoGnta*cqcQ1a^fw5IZAe$gUzPzT4IzeUY+I_8Ir!DtnjZbV~?iA&q;wguo&M zX3L~YY}H%OmSu+G3Ue8cMxM6$oU2nKOD9V!tzFCC^)-zm(g9a%A=?7AHd7vMdS{H- zQQrZni?F1BGUg*+=*c&WIV+dv>HaPD(LN!tPPjm3(LsIFQ+*c9{In`Rm*<_H>Am{D zly>@5Z&K#0kLZ=Vp7kJ(#yM}3zAJJmfe{u83oEkXI|ol@Qo+bZMb9V(O0lQg6jvgO zNP=QIT1IlZuuBWe<=xZxt1dQU)hZshJzC99RVDRVpoHy|t!g#ZlbPywnTX$|C8gl4t{I$KzD`Ff%xdP9#yA#b zy<*mrS1C^DDqb2i@d&_KCMi3#s?R1mHFSdYhH zTunQ(SQmC726oh2cY~ErJG50htVwCkBvh!Tfig z`IOB+M-Gmqx@k6nO1G2Odv zLe;sqR`4FV6fndxLp8G)`VU8x=HbGH!kjuBHdLMpw)~T=rm$S}@2&*eps4bxLq5@| z+o2(wfwYNdk;!70nag-Jps$l*FT37Rb2u71bzyxUuym76O;ZR2K6&%F<53)yg2Rq- zPDo>?KUu6Ou~YnELqv>);QKXP; zAN$ay>z@%)H9ulR^f~L~d={aBkWr{AW*h%eF*T5c^T81}8YVnnHs9wD6{;Wph}hFg zz`Mozh>_`v^*^o=rz>;VnBh84J!9^&@7e{`uAXwWf0JQ)(us@WWVfXH{PZ#N@>Hzt zWT%@DT)Sy$k@6g;hZPSy^3Yf2J|QjCK0|qWeZAi8VTX3rwK$(kuYZL;?{wGc&d&-h zb*KcE-$`D)alf_C23ncsfV(S2zZ1-DX=1YQ;l+Q=d_5Ry9UBxOO6dIBRISEl*Xxg% z4WNbUWRh}4y@_vx%juoD86#YTf7?7JevpWkhlnlc8Hdk9YjXwBSytJ1NzCqs=oH!7 z{#c!RE^y5xSvr}<_M_0Q9Q`suHi$i0Jnii=R7No7*eqmr_*f6?5L*)EcXa+@pvKac z*l@$+ynD*e9+Q^Fo2t;#BSdjoO>OR?g@@Kxzmb%uE2g7XT48&n{x(NM|wtOa29g1*;}E-~OvEcYpeSV7)j)u>li?!b)|I z$6YY#T!5*V)V#>!mqtj!w&i^WcH3*B{e@~q0v}`AR|p(If=ZncCH929>vKF=mbDhe zmFD!MiQCMQLutfUEh93ocYaGjH|&V{Jn)Aqap`CSsxR$X#Y(9I%g?MuJiJP^E8KuS zdmh5|;3<^{j1{7o=F&v)IwsN}eDiM0Jq>KwSgg-k#;1F|vlm$s9Yx+2aH-3W4)@*K zxhT}?(0%Iswq=KYor5ebt@Dl}SDeii(I209&Gp{b4N)Sn!DC7>h{k|BSm-F=nN}#W z7z%-kwoD9svI`4o(5?pOn?HFo!U9%9^hKWG;*^l-XehD$xSZJ$(GA2C@}cN=aUSf0Ug2 z>wC{lqfBTgL-y`h%4RFsCQ;k}r@5<+i)!2cN-7eP(u{%vg2MC+B{3rn4jl$a3rY$ z@id7Y>1{D_QW4F3bT2jCKT{eZk|x=ZlB{OR&&|1Q)vM3igI6yx+w5G?gt0_kRIxE? z05>@ZeAB|sVZPRIH2X}uaBYJ;V*idnszvhEW;iVDpuf5~Y>;5*5k#zFqo|pR+9Rl3 zZfnY4fyqX$zG4-Dd;vK;Tg=g|=>H<)!xxU@5fo4qY{~J3$y+k@eZr^MLe3QD9K6EVK?_C zS-#us1uIVuILOz;Bv2diA&N2MXHgm;$_+N%^jXk@#E?aG>lG4SRvU_Qud9D-nMBhs zXsN^SreHu4kZY{Oy|99AKBkv1E;5;%h4EX?s>iUjvn{IUuiCvC`&epVyB!6^$xf$= z*pRO#TEL|f8Wdj!NJRv2vS4eAit01qmqW{ug5I!#^rwh9b&pDZP4?Z1Am`T8kk|Pl z?Q!MXu5&)?v_5>a;*g-n0E;+F4R(io`~LO5bm>v^gjKUgq=D)yJ5jSF+(pqc4&&6* zQp<@JSAxGMNu3V?o@(?N2gX6pbS0jJAIKC_!`A0FN@-(yGXk}!$P$Wfjm6IiJKS|T zE8a=|g_{hQ9OlYRlX>qi#yXzn8V;sT`MJT||kD+|D(B=A&N>!rSrC4pAXXG`Z8KVLO_aKQA%#Kb z?n`}d)97}ff9oW(oqEg9g)~fQ5m4D*#1OBp-Br1OAIJ|AvF_q%744PnmL)c46{mRh z%U>*NCSKa)k_>Cf?3Gliiint?l+p<&s@DMf%pI5mKggot(z{FMw4f|eg8(J`a`c1C>zS34lyfRkXk0a&llx-*c4c}c z=ZYVWv#LeVHAg85UeKuAz}PrRl*1y3HxH%Z$dGZ05}geFqlr9hvzd?djtNs75TSd2 zv(4IF1|)Vf^LzlYeIoTpk_etWX=?cN_myB|3%6jgcB5{cJ)7QC`;GxsF@L$L@8tSe zuKS!M#}c($e^eD&8V`h`Q5(H(qBM|XuFQ_~S+1-4c;?`fDK{;Je?{mTSZd-l z>J$R$%X_#=t}dN2>)hV1#_*|RCYPbs@VXDP1(%KV-n z!Bvtss;-o~zy2e`;d}gD!22BeyH`5kq|O|>PtFB0raa!2AN}84`LA2s-4{|bvA1@x zGcvIk6BD{_{Q!S(0)zfs5L`k+2)K6ris!?L4T{gFjXf< zPrj3D&8b26wwK`6AK$-${Wd#8Y=(+E{cLxbx2M|9Y`L{BK3lPnRx)RZ!avUncrxdG zu67zvw^cCWKM-;UyfbM!#}%rj^PE5NyVYl^&P5sLn0tJIp>xB|192(|&xsVAG$Wm% zAum~#XWBnI4mT`!+<$oDBL>fLY^K8xvg1F#zw!Sw(;>gV(s5j-n}1-!q!yi|X{by7 za(N&hkDbd$o*qdikF1d#_ed~{;x;3)BqmC8?3RwsIDOAwnl-@d4T1lgUGrB8jBDYi zYcn+#8k+n%#6{8%s8222Ouziw&hqUbjnmdpC>r`%g@UKjf=u`33BE(#|Z;eQkvJHy!Q{pgme7P!*?t$$zL67dID3r?OHS4jkabIC{9EpS#&H1;x+LYC$EZhDmjQz$G=Hj}= zqUO}+D?{KB7+Ji9*kT8v19vj5BI~>am#kt)x?QAI&yvv=0dcKs0MB!5o&z=SP@b#a zy{C@9FQfv3Ac3l8XO9Pg(TM+0>EMT#_ixZtwj7c?`<{H2Yjz-Bi+dpwL?Rv6Nq0Bc zcrIxgG^DSO0TzFy`dGb`qh%Ly!Q6m`H02#Mdec!$tRsk>?kp>b_YKcLvR6b3Cm}wt zv;diC?i&~A*;7eEDN>2@=)*8mEP(y&f)vjCC54m;Ki~FDM62W{5(a;)|34-`n#p5u?((=0kkNij|w2Bz@ ztHs&0$`^|r-i4rxe%=WaBhp{+`WZbx|LKV&j@aaV)YPeciy+-(_P_=~-2QWC?IqPX zLuAO$RmNGEaA5dQWRa+~lYysA!a$}n|JxZ9Qai+C`M ztGz-scrASpX1XEN^AvKe!mXKT`NRcJN@0z!Cw7C^-c*oNp4HH}fs?|LGBO_gs7rNQ zilB+xD<0|j^nn>Ul)Dq-M?cs&_*(bnR!y`vRDXx88Y-1Y-dC2PJI{01Loq9X+p4{^C$bhz1bgt2uatZX7jvKJ`a~HzF zvPEV_bUiTUCBtRyA;$nw?fpFSE?I(%(6A#xkY^QzC!P@g%A0UUPd1T z78X8ee*X0jfrNn$KEE&+^nm);^*_;n(jUeSu8;ftisSD)zh51X{yUmqX&;0+p5pJ= z{yzVEs(*jy@36r67U)kU{@FmI4$}U+ss0ZgB3u~$*ESqrK*KQfp{BA;PcfLifn_f{ z>$TIy`}sofWSJ4$Q00BU60fs{lbRy6TBpd8JRdJN&qwOSn1o!6VW$g}lLLj{^p-?p z(OaH0Wp5dE6&?#>UHIty*`LW=z*3OgOHEF``XcY3xvTj|Tf4)ktg{4u>(;HI-QA`A zd=`Tf!lc)TPbzj)Z_OF$@0BjIop`I=zPDUowz2J%zqfPs#J+UB4`R`uZ}0X!sou-G>880sY&KorTH>l2x-alE4@wxV!Y`~~(Z-R+*Qz&WfpL98 z_3}AS@ur#SvGx+7+&b07D@%Pd-@AWolszB&IsJa*gxluFdDTD0Dwp5ZUwrz0zhy}# zRFm`F;*ZUcKL`nXtQZb0i3+>9S*|?xXB`1+=VmrjU@9}2q4R6@5_QjZ;L8>fgQCur ziKZ$ao*D@3kqa_J7To$4dBZ2jN3|*W5{iIZ-Z&q)#}OiB=u=*XL%x68V(f1%Z^k%f zy&7vcFKwwi&PlvtFMg@$d~!Qm$Hlv|-^61FE;}fM4sht1eS1Vv(nv4ji5k_aBZM|T zC8YU@1tMwY)vv^7sH%Ku{l+dR_`t%-cj)aHwbQW6A0wO7PIr9WBBMne7t5_TIZOAw z$hlm%Xb0Zy7xqtmBBz$Xr76XTxi52b(z=tBIb4y-s}LQ3=*-ONySvQb&K3WBy^6=e znWMc{q_Srz`-R&=kl6&e4MXUMPj*?Ns}|fPSOK zhtA~;b**)&t zz1j^WOcSh=CMQ{=8Sxb5oRs&YLGd?MAqx0t3MYQb(-I$j0{iLWIK1u|Fm8FE)m*vd zM5!+XwLMD)Q`2dYlfGfeP08?+_tZ2`qWR2Gnc?+=mSzUs&D%UYPz;ti$6cD)_~SiR zz2Y(*>_s`J8#Uk4HOl7^!dum!ZXzA1QOXm7q9nEd-Da#o_I8Fst2+nWKnp1i=XvyYXt zQCiC9D7(31Wn-Q#wTSV?vX1#?g*|`q%GPu%hml*$J)X1H%;0f?CL(BH`cwH}euTG- z)#xY6I=<{u!_YTPNf}JCy_#tWL}?094ZRr3cBKnG-Yl45=WA6gG=-%%duziOum)6X za~}(x6j%r3ZF;f$6T&H}(7Lu}8#aPbt%oUN@5)1~PnH^;6L+*f`ujLC4)f;8IrA2( zu*omDDTLUY-xn;<(iZ3LIu~(aZFa}jXW&#gr~QL8OSy%+)bOBbn_#`b=tMgOk?aWU|CdQjEx1bvJ3-n$yQ1{&ui7$((iFGC6KR89{1c^SWi-)MW1&W zsV}7xxajwRvhD>v6a1poY?x~c6}~kl^3~JP4h*ZYQnH?uV`#zcJt-e8Id|*_!_N6& zLU#673RaxmReka}7CdwA0~XQ5LM5~mG=C*HR?*)bC$~gvX?!~}I|yO+dTrQ`o^>?PglJkiTOGgq(|;MdC~Sfjaa zU0j>IB5y&J8ra4bt8Fx!1LN_w)8f?ST6{c_gO3$E9}&3yQf`WlgN-7{L{={V8@Ph< zqmItQy$(@$Oi2Dx+bhXW;^0sF?d?PO=V%+o>>es9P^YodPaiN!&$qEdSz4lkR+>dl z$W1dNbE7+Kp=Exr)ODfhSr%nl4r4HbkY06(nsLUomcY%D&%E86_6#XhG9I_=%f5-a z$GyeTxj*kAZ)zFS+z==7(OoDg$FX${ntxv;NcO7UXe$vRK9x&g=a^+xiL_*L8f)RG z^G`{eW#I`fADT?LvI3j_g1=c<#<_@j-}JhCl2&7;y_EE&+pa{X z3oOv*<@|xbI>XfG5(^Di{eo<)@4d%%A@N02waj=1GbvZ!N?23+a0xBBr63(Ub`q0k zvHatm?&6Qn*8}XayYnxiB3ba2pe6`GI0)0COVbw`I|Ue`@_wmG-4lzr9P|;{FO3@z5lQL`or~~dxyGgYbOP~X+VJ3+tto8#!uUF?U=3t^CRyiA=N#z zudgyU(;ukt_AIq*{Aj%oC79)Pw6|AX8sdGkA2Wp9>?s4r0&B9f*P^S-mgN$~_08GN zRKphrYa?ggqErXfpYRs&yMDE4*(<(xa+zEM*jDC4FzKtOy*ekJTUu-T1{u3=UBQKOIW@YaC*}*t?w1PY(+`9} zvu!906I-9rPGtCSx<3XLv$;n`j1pgG(84@aZPu8I(JOwEYEGY9%k*-~a%tJ0s%-xiw{)_~V=Sik2^lS8-ZCb| zoDSS2IGK#)*;%M_C*!p@Y!zaa5TQCYW1a0xOsOb@K`03D{nr5ptZr~%CJs8d^Vb0e z)_XrVKo9&!|4LpF=3Iy!2IyHbRiHp0+=WLjvW zqmN*42o!!;S8xa#d^lY=8h%92NHFxksQDW&NH7X^I9-5c3VCLZJa$>Y@11 z!T^JZF*q7^1Vf-fzbz6ir?f# zL6Gpn{Gkvi=wTh8kgx;u+HYaeU>NeSp3x}C;qnJm1=wL798?d)k$NO743xhkbsv!T zC9t9*GYqFGsOsb zU@-8ZG6@00h5xl}$J-fNSee*SQ2>u}evKd?|J%ccUjqX}JN&Qy4&VreLQqj$yogo3 sPDSx|Cn!us@qfUZ&<#5iN6;^pgbs#PfW`da642QZwvoV7slV9%AI#cxM*si- literal 0 HcmV?d00001 diff --git a/Marlin/Marlin/Makefile b/Marlin/Marlin/Makefile new file mode 100644 index 0000000000..940bb168b7 --- /dev/null +++ b/Marlin/Marlin/Makefile @@ -0,0 +1,298 @@ +# Sprinter Arduino Project Makefile +# +# Makefile Based on: +# Arduino 0011 Makefile +# Arduino adaptation by mellis, eighthave, oli.keller +# +# This has been tested with Arduino 0022. +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# Detailed instructions for using the makefile: +# +# 1. Modify the line containg "INSTALL_DIR" to point to the directory that +# contains the Arduino installation (for example, under Mac OS X, this +# might be /Applications/arduino-0012). +# +# 2. Modify the line containing "PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*). +# +# 3. Set the line containing "MCU" to match your board's processor. +# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth +# or Diecimila have the atmega168. If you're using a LilyPad Arduino, +# change F_CPU to 8000000. If you are using Gen7 electronics, you +# probably need to use 20000000. Either way, you must regenerate +# the speed lookup table with create_speed_lookuptable.py. +# +# 4. Type "make" and press enter to compile/verify your program. +# +# 5. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# $Id$ + +#For "old" Arduino Mega +#MCU = atmega1280 +#For Arduino Mega2560 +#MCU = atmega2560 +#For Sanguinololu +MCU = atmega644p + +# Here you select "arduino", "Sanguino", "Gen7", ... +HARDWARE_VARIANT = Sanguino +# This defined the board you are compiling for +HARDWARE_MOTHERBOARD = 91 + +# Arduino source install directory +INSTALL_DIR = ../../arduino-0022 + +# Arduino containd the main source code for the Arduino +# Libraries, the "hardware variant" are for boards +# that derives from that, and their source are present in +# the main Marlin source directory +ARDUINO = $(INSTALL_DIR)/hardware/arduino/cores/arduino + +ifeq (${HARDWARE_VARIANT}, arduino) +HARDWARE_SRC= $(ARDUINO) +else +HARDWARE_SRC= $(HARDWARE_VARIANT)/cores/arduino +endif + +# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py +# if you are setting this to something other than 16MHz +F_CPU = 16000000 + +UPLOAD_RATE = 115200 +AVRDUDE_PROGRAMMER = arduino +PORT = /dev/arduino + +TARGET = $(notdir $(CURDIR)) + +# VPATH tells make to look into these directory for source files, +# there is no need to specify explicit pathnames as long as the +# directory is added here + +VPATH = . +VPATH += applet +VPATH += $(HARDWARE_SRC) +VPATH += $(ARDUINO) +VPATH += $(INSTALL_DIR)/libraries/LiquidCrystal + +############################################################################ +# Below here nothing should be changed... + +AVR_TOOLS_PATH = +SRC = pins_arduino.c wiring.c \ + wiring_analog.c wiring_digital.c \ + wiring_pulse.c \ + wiring_shift.c WInterrupts.c +CXXSRC = WMath.cpp WString.cpp Print.cpp \ + Marlin.cpp MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp \ + SdFatUtil.cpp SdFile.cpp SdVolume.cpp motion_control.cpp \ + planner.cpp stepper.cpp temperature.cpp cardreader.cpp +#CXXSRC += LiquidCrystal.cpp ultralcd.cpp +#CXXSRC += ultralcd.cpp +FORMAT = ihex + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) +CXXDEFS = -DF_CPU=$(F_CPU) + +# Add all the source directories as include directories too +CINCS = ${addprefix -I ,${VPATH}} +CXXINCS = ${addprefix -I ,${VPATH}} + +# Compiler flag to set the C Standard level. +# c89 - "ANSI" C +# gnu89 - c89 plus GCC extensions +# c99 - ISO C99 standard (not yet fully implemented) +# gnu99 - c99 plus GCC extensions +#CSTANDARD = -std=gnu99 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct \ + -fshort-enums -w -ffunction-sections -fdata-sections \ + -DARDUINO=22 +ifneq (${HARDWARE_MOTHERBOARD},) +CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD} +endif +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) + +CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING) +CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = -lm + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PORT = $(PORT) +AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex:i +AVRDUDE_FLAGS = -D -C $(INSTALL_DIR)/hardware/tools/avrdude.conf \ + -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ + -b $(UPLOAD_RATE) + +# Program settings +CC = $(AVR_TOOLS_PATH)avr-gcc +CXX = $(AVR_TOOLS_PATH)avr-g++ +OBJCOPY = $(AVR_TOOLS_PATH)avr-objcopy +OBJDUMP = $(AVR_TOOLS_PATH)avr-objdump +AR = $(AVR_TOOLS_PATH)avr-ar +SIZE = $(AVR_TOOLS_PATH)avr-size +NM = $(AVR_TOOLS_PATH)avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +MV = mv -f + +# Define all object files. +OBJ = ${patsubst %.c, applet/%.o, ${SRC}} +OBJ += ${patsubst %.cpp, applet/%.o, ${CXXSRC}} +OBJ += ${patsubst %.S, applet/%.o, ${ASRC}} + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) + +# set V=1 (eg, "make V=1") to print the full commands etc. +ifneq ($V,1) + Pecho=@echo + P=@ +else + Pecho=@: + P= +endif + +# Default target. +all: sizeafter + +build: applet elf hex + +# Creates the object directory +applet: + $P mkdir -p applet + +# the .cpp for Marlin depends on the .pde +#applet/$(TARGET).cpp: $(TARGET).pde +# ..and the .o depends from the .cpp +#applet/%.o: applet/%.cpp + +applet/%.cpp: %.pde $(MAKEFILE) +# Here is the "preprocessing". +# It creates a .cpp file based with the same name as the .pde file. +# On top of the new .cpp file comes the WProgram.h header. + $(Pecho) " WR $@" + $P echo '#include "WProgram.h"' > $@ + $P echo '#include "$<"' >>$@ + $P echo '#include "$(ARDUINO)/main.cpp"' >> $@ + +elf: applet/$(TARGET).elf +hex: applet/$(TARGET).hex +eep: applet/$(TARGET).eep +lss: applet/$(TARGET).lss +sym: applet/$(TARGET).sym + +# Program the device. +# Do not try to reset an arduino if it's not one +upload: applet/$(TARGET).hex +ifeq (${AVRDUDE_PROGRAMMER}, arduino) + stty hup < $(PORT); true +endif + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) +ifeq (${AVRDUDE_PROGRAMMER}, arduino) + stty -hup < $(PORT); true +endif + + # Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex +ELFSIZE = $(SIZE) --mcu=$(MCU) -C applet/$(TARGET).elf; \ + $(SIZE) applet/$(TARGET).elf +sizebefore: + $P if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi + +sizeafter: build + $P if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ + --change-section-address .data-0x800000 \ + --change-section-address .bss-0x800000 \ + --change-section-address .noinit-0x800000 \ + --change-section-address .eeprom-0x810000 + + +coff: applet/$(TARGET).elf + $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof + + +extcoff: $(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym +.PRECIOUS: .o + +.elf.hex: + $(Pecho) " COPY $@" + $P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + # Link: create ELF output file from library. +applet/$(TARGET).elf: applet/$(TARGET).cpp applet/core.a Configuration.h + $(Pecho) " CXX $@" + $P $(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS) + +applet/core.a: $(OBJ) + $P for i in $(OBJ); do echo " AR $$i"; $(AR) rcs applet/core.a $$i; done + +applet/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE) + $(Pecho) " CC $@" + $P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@ + +applet/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE) + $(Pecho) " CXX $@" + $P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@ + + +# Target: clean project. +clean: + $(Pecho) " RM applet/*" + $P $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \ + applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp applet/core.a \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + $(Pecho) " RMDIR applet/" + $P rm -rf applet + + +.PHONY: all build elf hex eep lss sym program coff extcoff clean depend applet_files sizebefore sizeafter + +# Automaticaly include the dependency files created by gcc +-include ${wildcard applet/*.d} diff --git a/Marlin/Marlin/Marlin.h b/Marlin/Marlin/Marlin.h new file mode 100644 index 0000000000..5b59885cd3 --- /dev/null +++ b/Marlin/Marlin/Marlin.h @@ -0,0 +1,203 @@ +// Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware. +// Licence: GPL + +#ifndef MARLIN_H +#define MARLIN_H + +#define HardwareSerial_h // trick to disable the standard HWserial + +#define FORCE_INLINE __attribute__((always_inline)) inline + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + + +#include "fastio.h" +#include "Configuration.h" +#include "pins.h" + +#if ARDUINO >= 100 + #if defined(__AVR_ATmega644P__) + #include "WProgram.h" + #else + #include "Arduino.h" + #endif +#else + #include "WProgram.h" +#endif + +#include "MarlinSerial.h" + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +#include "WString.h" + +#if MOTHERBOARD == 8 // Teensylu + #define MYSERIAL Serial +#else + #define MYSERIAL MSerial +#endif + +//this is a unfinsihed attemp to removes a lot of warning messages, see: +// http://www.avrfreaks.net/index.php?name=PNphpBB2&file=printview&t=57011 +//typedef char prog_char PROGMEM; +// //#define PSTR (s ) ((const PROGMEM char *)(s)) +// //# define MYPGM(s) (__extension__({static prog_char __c[] = (s); &__c[0];})) +// //#define MYPGM(s) ((const prog_char *g PROGMEM=s)) +#define MYPGM(s) PSTR(s) +//#define MYPGM(s) (__extension__({static char __c[] __attribute__((__progmem__)) = (s); &__c[0];})) //This is the normal behaviour +//#define MYPGM(s) (__extension__({static prog_char __c[] = (s); &__c[0];})) //this does not work but hides the warnings + + +#define SERIAL_PROTOCOL(x) MYSERIAL.print(x); +#define SERIAL_PROTOCOL_F(x,y) MYSERIAL.print(x,y); +#define SERIAL_PROTOCOLPGM(x) serialprintPGM(MYPGM(x)); +#define SERIAL_PROTOCOLLN(x) {MYSERIAL.print(x);MYSERIAL.write('\n');} +#define SERIAL_PROTOCOLLNPGM(x) {serialprintPGM(MYPGM(x));MYSERIAL.write('\n');} + + +const char errormagic[] PROGMEM ="Error:"; +const char echomagic[] PROGMEM ="echo:"; +#define SERIAL_ERROR_START serialprintPGM(errormagic); +#define SERIAL_ERROR(x) SERIAL_PROTOCOL(x) +#define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x) +#define SERIAL_ERRORLN(x) SERIAL_PROTOCOLLN(x) +#define SERIAL_ERRORLNPGM(x) SERIAL_PROTOCOLLNPGM(x) + +#define SERIAL_ECHO_START serialprintPGM(echomagic); +#define SERIAL_ECHO(x) SERIAL_PROTOCOL(x) +#define SERIAL_ECHOPGM(x) SERIAL_PROTOCOLPGM(x) +#define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x) +#define SERIAL_ECHOLNPGM(x) SERIAL_PROTOCOLLNPGM(x) + +#define SERIAL_ECHOPAIR(name,value) (serial_echopair_P(PSTR(name),(value))) + +void serial_echopair_P(const char *s_P, float v); +void serial_echopair_P(const char *s_P, double v); +void serial_echopair_P(const char *s_P, unsigned long v); + + +//things to write to serial from Programmemory. saves 400 to 2k of RAM. +#define SerialprintPGM(x) serialprintPGM(MYPGM(x)) +FORCE_INLINE void serialprintPGM(const char *str) +{ + char ch=pgm_read_byte(str); + while(ch) + { + MYSERIAL.write(ch); + ch=pgm_read_byte(++str); + } +} + + +void get_command(); +void process_commands(); + +void manage_inactivity(); + +#if X_ENABLE_PIN > -1 + #define enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON) + #define disable_x() WRITE(X_ENABLE_PIN,!X_ENABLE_ON) +#else + #define enable_x() ; + #define disable_x() ; +#endif + +#if Y_ENABLE_PIN > -1 + #define enable_y() WRITE(Y_ENABLE_PIN, Y_ENABLE_ON) + #define disable_y() WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON) +#else + #define enable_y() ; + #define disable_y() ; +#endif + +#if Z_ENABLE_PIN > -1 + #ifdef Z_DUAL_STEPPER_DRIVERS + #define enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); } + #define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); } + #else + #define enable_z() WRITE(Z_ENABLE_PIN, Z_ENABLE_ON) + #define disable_z() WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON) + #endif +#else + #define enable_z() ; + #define disable_z() ; +#endif + +#if defined(E0_ENABLE_PIN) && (E0_ENABLE_PIN > -1) + #define enable_e0() WRITE(E0_ENABLE_PIN, E_ENABLE_ON) + #define disable_e0() WRITE(E0_ENABLE_PIN,!E_ENABLE_ON) +#else + #define enable_e0() /* nothing */ + #define disable_e0() /* nothing */ +#endif + +#if (EXTRUDERS > 1) && defined(E1_ENABLE_PIN) && (E1_ENABLE_PIN > -1) + #define enable_e1() WRITE(E1_ENABLE_PIN, E_ENABLE_ON) + #define disable_e1() WRITE(E1_ENABLE_PIN,!E_ENABLE_ON) +#else + #define enable_e1() /* nothing */ + #define disable_e1() /* nothing */ +#endif + +#if (EXTRUDERS > 2) && defined(E2_ENABLE_PIN) && (E2_ENABLE_PIN > -1) + #define enable_e2() WRITE(E2_ENABLE_PIN, E_ENABLE_ON) + #define disable_e2() WRITE(E2_ENABLE_PIN,!E_ENABLE_ON) +#else + #define enable_e2() /* nothing */ + #define disable_e2() /* nothing */ +#endif + + +enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3}; + + +void FlushSerialRequestResend(); +void ClearToSend(); + +void get_coordinates(); +void prepare_move(); +void kill(); +void Stop(); + +bool IsStopped(); + +void enquecommand(const char *cmd); //put an ascii command at the end of the current buffer. +void prepare_arc_move(char isclockwise); +void clamp_to_software_endstops(float target[3]); + +#ifdef FAST_PWM_FAN +void setPwmFrequency(uint8_t pin, int val); +#endif + +#ifndef CRITICAL_SECTION_START + #define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli(); + #define CRITICAL_SECTION_END SREG = _sreg; +#endif //CRITICAL_SECTION_START + +extern float homing_feedrate[]; +extern bool axis_relative_modes[]; +extern float current_position[NUM_AXIS] ; +extern float add_homeing[3]; +extern float min_pos[3]; +extern float max_pos[3]; +extern unsigned char FanSpeed; + +// Handling multiple extruders pins +extern uint8_t active_extruder; + +#endif diff --git a/Marlin/Marlin/Marlin.pde b/Marlin/Marlin/Marlin.pde new file mode 100644 index 0000000000..5c46e7355f --- /dev/null +++ b/Marlin/Marlin/Marlin.pde @@ -0,0 +1,1832 @@ +/* -*- c++ -*- */ + +/* + Reprap firmware based on Sprinter and grbl. + Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + */ + +/* + This firmware is a mashup between Sprinter and grbl. + (https://github.com/kliment/Sprinter) + (https://github.com/simen/grbl/tree) + + It has preliminary support for Matthew Roberts advance algorithm + http://reprap.org/pipermail/reprap-dev/2011-May/003323.html + */ + +#include "Marlin.h" + +#include "ultralcd.h" +#include "planner.h" +#include "stepper.h" +#include "temperature.h" +#include "motion_control.h" +#include "cardreader.h" +#include "watchdog.h" +#include "EEPROMwrite.h" +#include "language.h" +#include "pins_arduino.h" + +#define VERSION_STRING "1.0.0" + +// look here for descriptions of gcodes: http://linuxcnc.org/handbook/gcode/g-code.html +// http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes + +//Implemented Codes +//------------------- +// G0 -> G1 +// G1 - Coordinated Movement X Y Z E +// G2 - CW ARC +// G3 - CCW ARC +// G4 - Dwell S or P +// G10 - retract filament according to settings of M207 +// G11 - retract recover filament according to settings of M208 +// G28 - Home all Axis +// G90 - Use Absolute Coordinates +// G91 - Use Relative Coordinates +// G92 - Set current position to cordinates given + +//RepRap M Codes +// M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled) +// M1 - Same as M0 +// M104 - Set extruder target temp +// M105 - Read current temp +// M106 - Fan on +// M107 - Fan off +// M109 - Wait for extruder current temp to reach target temp. +// M114 - Display current position + +//Custom M Codes +// M17 - Enable/Power all stepper motors +// M18 - Disable all stepper motors; same as M84 +// M20 - List SD card +// M21 - Init SD card +// M22 - Release SD card +// M23 - Select SD file (M23 filename.g) +// M24 - Start/resume SD print +// M25 - Pause SD print +// M26 - Set SD position in bytes (M26 S12345) +// M27 - Report SD print status +// M28 - Start SD write (M28 filename.g) +// M29 - Stop SD write +// M30 - Delete file from SD (M30 filename.g) +// M31 - Output time since last M109 or SD card start to serial +// M42 - Change pin status via gcode +// M80 - Turn on Power Supply +// M81 - Turn off Power Supply +// M82 - Set E codes absolute (default) +// M83 - Set E codes relative while in Absolute Coordinates (G90) mode +// M84 - Disable steppers until next move, +// or use S to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout. +// M85 - Set inactivity shutdown timer with parameter S. To disable set zero (default) +// M92 - Set axis_steps_per_unit - same syntax as G92 +// M114 - Output current position to serial port +// M115 - Capabilities string +// M117 - display message +// M119 - Output Endstop status to serial port +// M140 - Set bed target temp +// M190 - Wait for bed current temp to reach target temp. +// M200 - Set filament diameter +// M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) +// M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! +// M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec +// M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate +// M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk +// M206 - set additional homeing offset +// M207 - set retract length S[positive mm] F[feedrate mm/sec] Z[additional zlift/hop] +// M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec] +// M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. +// M220 S- set speed factor override percentage +// M221 S- set extrude factor override percentage +// M240 - Trigger a camera to take a photograph +// M301 - Set PID parameters P I and D +// M302 - Allow cold extrudes +// M303 - PID relay autotune S sets the target temperature. (default target temperature = 150C) +// M400 - Finish all moves +// M500 - stores paramters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// M503 - print the current settings (from memory not from eeprom) +// M999 - Restart after being stopped by error + +//Stepper Movement Variables + +//=========================================================================== +//=============================imported variables============================ +//=========================================================================== + + +//=========================================================================== +//=============================public variables============================= +//=========================================================================== +#ifdef SDSUPPORT +CardReader card; +#endif +float homing_feedrate[] = HOMING_FEEDRATE; +bool axis_relative_modes[] = AXIS_RELATIVE_MODES; +volatile int feedmultiply=100; //100->1 200->2 +int saved_feedmultiply; +volatile bool feedmultiplychanged=false; +volatile int extrudemultiply=100; //100->1 200->2 +float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 }; +float add_homeing[3]={0,0,0}; +float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }; +float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; +uint8_t active_extruder = 0; +unsigned char FanSpeed=0; + +#ifdef FWRETRACT + bool autoretract_enabled=true; + bool retracted=false; + float retract_length=3, retract_feedrate=17*60, retract_zlift=0.8; + float retract_recover_length=0, retract_recover_feedrate=8*60; +#endif + +//=========================================================================== +//=============================private variables============================= +//=========================================================================== +const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; +static float destination[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0}; +static float offset[3] = {0.0, 0.0, 0.0}; +static bool home_all_axis = true; +static float feedrate = 1500.0, next_feedrate, saved_feedrate; +static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0; + +static bool relative_mode = false; //Determines Absolute or Relative Coordinates +static bool relative_mode_e = false; //Determines Absolute or Relative E Codes while in Absolute Coordinates mode. E is always relative in Relative Coordinates mode. + +static char cmdbuffer[BUFSIZE][MAX_CMD_SIZE]; +static bool fromsd[BUFSIZE]; +static int bufindr = 0; +static int bufindw = 0; +static int buflen = 0; +//static int i = 0; +static char serial_char; +static int serial_count = 0; +static boolean comment_mode = false; +static char *strchr_pointer; // just a pointer to find chars in the cmd string like X, Y, Z, E, etc + +const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42 + +//static float tt = 0; +//static float bt = 0; + +//Inactivity shutdown variables +static unsigned long previous_millis_cmd = 0; +static unsigned long max_inactive_time = 0; +static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l; + +static unsigned long starttime=0; +static unsigned long stoptime=0; + +static uint8_t tmp_extruder; + + +bool Stopped=false; + +//=========================================================================== +//=============================ROUTINES============================= +//=========================================================================== + +void get_arc_coordinates(); + +void serial_echopair_P(const char *s_P, float v) + { serialprintPGM(s_P); SERIAL_ECHO(v); } +void serial_echopair_P(const char *s_P, double v) + { serialprintPGM(s_P); SERIAL_ECHO(v); } +void serial_echopair_P(const char *s_P, unsigned long v) + { serialprintPGM(s_P); SERIAL_ECHO(v); } + +extern "C"{ + extern unsigned int __bss_end; + extern unsigned int __heap_start; + extern void *__brkval; + + int freeMemory() { + int free_memory; + + if((int)__brkval == 0) + free_memory = ((int)&free_memory) - ((int)&__bss_end); + else + free_memory = ((int)&free_memory) - ((int)__brkval); + + return free_memory; + } +} + +//adds an command to the main command buffer +//thats really done in a non-safe way. +//needs overworking someday +void enquecommand(const char *cmd) +{ + if(buflen < BUFSIZE) + { + //this is dangerous if a mixing of serial and this happsens + strcpy(&(cmdbuffer[bufindw][0]),cmd); + SERIAL_ECHO_START; + SERIAL_ECHOPGM("enqueing \""); + SERIAL_ECHO(cmdbuffer[bufindw]); + SERIAL_ECHOLNPGM("\""); + bufindw= (bufindw + 1)%BUFSIZE; + buflen += 1; + } +} + +void setup_killpin() +{ + #if( KILL_PIN>-1 ) + pinMode(KILL_PIN,INPUT); + WRITE(KILL_PIN,HIGH); + #endif +} + +void setup_photpin() +{ + #ifdef PHOTOGRAPH_PIN + #if (PHOTOGRAPH_PIN > -1) + SET_OUTPUT(PHOTOGRAPH_PIN); + WRITE(PHOTOGRAPH_PIN, LOW); + #endif + #endif +} + +void setup_powerhold() +{ + #ifdef SUICIDE_PIN + #if (SUICIDE_PIN> -1) + SET_OUTPUT(SUICIDE_PIN); + WRITE(SUICIDE_PIN, HIGH); + #endif + #endif +} + +void suicide() +{ + #ifdef SUICIDE_PIN + #if (SUICIDE_PIN> -1) + SET_OUTPUT(SUICIDE_PIN); + WRITE(SUICIDE_PIN, LOW); + #endif + #endif +} + +void setup() +{ + setup_killpin(); + setup_powerhold(); + MYSERIAL.begin(BAUDRATE); + SERIAL_PROTOCOLLNPGM("start"); + SERIAL_ECHO_START; + + // Check startup - does nothing if bootloader sets MCUSR to 0 + byte mcu = MCUSR; + if(mcu & 1) SERIAL_ECHOLNPGM(MSG_POWERUP); + if(mcu & 2) SERIAL_ECHOLNPGM(MSG_EXTERNAL_RESET); + if(mcu & 4) SERIAL_ECHOLNPGM(MSG_BROWNOUT_RESET); + if(mcu & 8) SERIAL_ECHOLNPGM(MSG_WATCHDOG_RESET); + if(mcu & 32) SERIAL_ECHOLNPGM(MSG_SOFTWARE_RESET); + MCUSR=0; + + SERIAL_ECHOPGM(MSG_MARLIN); + SERIAL_ECHOLNPGM(VERSION_STRING); + #ifdef STRING_VERSION_CONFIG_H + #ifdef STRING_CONFIG_H_AUTHOR + SERIAL_ECHO_START; + SERIAL_ECHOPGM(MSG_CONFIGURATION_VER); + SERIAL_ECHOPGM(STRING_VERSION_CONFIG_H); + SERIAL_ECHOPGM(MSG_AUTHOR); + SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR); + #endif + #endif + SERIAL_ECHO_START; + SERIAL_ECHOPGM(MSG_FREE_MEMORY); + SERIAL_ECHO(freeMemory()); + SERIAL_ECHOPGM(MSG_PLANNER_BUFFER_BYTES); + SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE); + for(int8_t i = 0; i < BUFSIZE; i++) + { + fromsd[i] = false; + } + + EEPROM_RetrieveSettings(); // loads data from EEPROM if available + + for(int8_t i=0; i < NUM_AXIS; i++) + { + axis_steps_per_sqr_second[i] = max_acceleration_units_per_sq_second[i] * axis_steps_per_unit[i]; + } + + + tp_init(); // Initialize temperature loop + plan_init(); // Initialize planner; + st_init(); // Initialize stepper; + wd_init(); + setup_photpin(); + + LCD_INIT; +} + + +void loop() +{ + if(buflen < (BUFSIZE-1)) + get_command(); + #ifdef SDSUPPORT + card.checkautostart(false); + #endif + if(buflen) + { + #ifdef SDSUPPORT + if(card.saving) + { + if(strstr(cmdbuffer[bufindr],"M29") == NULL) + { + card.write_command(cmdbuffer[bufindr]); + SERIAL_PROTOCOLLNPGM(MSG_OK); + } + else + { + card.closefile(); + SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED); + } + } + else + { + process_commands(); + } + #else + process_commands(); + #endif //SDSUPPORT + buflen = (buflen-1); + bufindr = (bufindr + 1)%BUFSIZE; + } + //check heater every n milliseconds + manage_heater(); + manage_inactivity(); + checkHitEndstops(); + LCD_STATUS; +} + +void get_command() +{ + while( MYSERIAL.available() > 0 && buflen < BUFSIZE) { + serial_char = MYSERIAL.read(); + if(serial_char == '\n' || + serial_char == '\r' || + (serial_char == ':' && comment_mode == false) || + serial_count >= (MAX_CMD_SIZE - 1) ) + { + if(!serial_count) { //if empty line + comment_mode = false; //for new command + return; + } + cmdbuffer[bufindw][serial_count] = 0; //terminate string + if(!comment_mode){ + comment_mode = false; //for new command + fromsd[bufindw] = false; + if(strstr(cmdbuffer[bufindw], "N") != NULL) + { + strchr_pointer = strchr(cmdbuffer[bufindw], 'N'); + gcode_N = (strtol(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL, 10)); + if(gcode_N != gcode_LastN+1 && (strstr(cmdbuffer[bufindw], "M110") == NULL) ) { + SERIAL_ERROR_START; + SERIAL_ERRORPGM(MSG_ERR_LINE_NO); + SERIAL_ERRORLN(gcode_LastN); + //Serial.println(gcode_N); + FlushSerialRequestResend(); + serial_count = 0; + return; + } + + if(strstr(cmdbuffer[bufindw], "*") != NULL) + { + byte checksum = 0; + byte count = 0; + while(cmdbuffer[bufindw][count] != '*') checksum = checksum^cmdbuffer[bufindw][count++]; + strchr_pointer = strchr(cmdbuffer[bufindw], '*'); + + if( (int)(strtod(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL)) != checksum) { + SERIAL_ERROR_START; + SERIAL_ERRORPGM(MSG_ERR_CHECKSUM_MISMATCH); + SERIAL_ERRORLN(gcode_LastN); + FlushSerialRequestResend(); + serial_count = 0; + return; + } + //if no errors, continue parsing + } + else + { + SERIAL_ERROR_START; + SERIAL_ERRORPGM(MSG_ERR_NO_CHECKSUM); + SERIAL_ERRORLN(gcode_LastN); + FlushSerialRequestResend(); + serial_count = 0; + return; + } + + gcode_LastN = gcode_N; + //if no errors, continue parsing + } + else // if we don't receive 'N' but still see '*' + { + if((strstr(cmdbuffer[bufindw], "*") != NULL)) + { + SERIAL_ERROR_START; + SERIAL_ERRORPGM(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM); + SERIAL_ERRORLN(gcode_LastN); + serial_count = 0; + return; + } + } + if((strstr(cmdbuffer[bufindw], "G") != NULL)){ + strchr_pointer = strchr(cmdbuffer[bufindw], 'G'); + switch((int)((strtod(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL)))){ + case 0: + case 1: + case 2: + case 3: + if(Stopped == false) { // If printer is stopped by an error the G[0-3] codes are ignored. + #ifdef SDSUPPORT + if(card.saving) + break; + #endif //SDSUPPORT + SERIAL_PROTOCOLLNPGM(MSG_OK); + } + else { + SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); + LCD_MESSAGEPGM(MSG_STOPPED); + } + break; + default: + break; + } + + } + bufindw = (bufindw + 1)%BUFSIZE; + buflen += 1; + } + serial_count = 0; //clear buffer + } + else + { + if(serial_char == ';') comment_mode = true; + if(!comment_mode) cmdbuffer[bufindw][serial_count++] = serial_char; + } + } + #ifdef SDSUPPORT + if(!card.sdprinting || serial_count!=0){ + return; + } + while( !card.eof() && buflen < BUFSIZE) { + int16_t n=card.get(); + serial_char = (char)n; + if(serial_char == '\n' || + serial_char == '\r' || + (serial_char == ':' && comment_mode == false) || + serial_count >= (MAX_CMD_SIZE - 1)||n==-1) + { + if(card.eof()){ + SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED); + stoptime=millis(); + char time[30]; + unsigned long t=(stoptime-starttime)/1000; + int sec,min; + min=t/60; + sec=t%60; + sprintf(time,"%i min, %i sec",min,sec); + SERIAL_ECHO_START; + SERIAL_ECHOLN(time); + LCD_MESSAGE(time); + card.printingHasFinished(); + card.checkautostart(true); + + } + if(!serial_count) + { + comment_mode = false; //for new command + return; //if empty line + } + cmdbuffer[bufindw][serial_count] = 0; //terminate string +// if(!comment_mode){ + fromsd[bufindw] = true; + buflen += 1; + bufindw = (bufindw + 1)%BUFSIZE; +// } + comment_mode = false; //for new command + serial_count = 0; //clear buffer + } + else + { + if(serial_char == ';') comment_mode = true; + if(!comment_mode) cmdbuffer[bufindw][serial_count++] = serial_char; + } + } + + #endif //SDSUPPORT + +} + + +float code_value() +{ + return (strtod(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL)); +} + +long code_value_long() +{ + return (strtol(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL, 10)); +} + +bool code_seen(char code_string[]) //Return True if the string was found +{ + return (strstr(cmdbuffer[bufindr], code_string) != NULL); +} + +bool code_seen(char code) +{ + strchr_pointer = strchr(cmdbuffer[bufindr], code); + return (strchr_pointer != NULL); //Return True if a character was found +} + +#define DEFINE_PGM_READ_ANY(type, reader) \ + static inline type pgm_read_any(const type *p) \ + { return pgm_read_##reader##_near(p); } + +DEFINE_PGM_READ_ANY(float, float); +DEFINE_PGM_READ_ANY(signed char, byte); + +#define XYZ_CONSTS_FROM_CONFIG(type, array, CONFIG) \ +static const PROGMEM type array##_P[3] = \ + { X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \ +static inline type array(int axis) \ + { return pgm_read_any(&array##_P[axis]); } + +XYZ_CONSTS_FROM_CONFIG(float, base_min_pos, MIN_POS); +XYZ_CONSTS_FROM_CONFIG(float, base_max_pos, MAX_POS); +XYZ_CONSTS_FROM_CONFIG(float, base_home_pos, HOME_POS); +XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH); +XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM); +XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR); + +static void axis_is_at_home(int axis) { + current_position[axis] = base_home_pos(axis) + add_homeing[axis]; + min_pos[axis] = base_min_pos(axis) + add_homeing[axis]; + max_pos[axis] = base_max_pos(axis) + add_homeing[axis]; +} + +static void homeaxis(int axis) { +#define HOMEAXIS_DO(LETTER) \ + ((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1)) + + if (axis==X_AXIS ? HOMEAXIS_DO(X) : + axis==Y_AXIS ? HOMEAXIS_DO(Y) : + axis==Z_AXIS ? HOMEAXIS_DO(Z) : + 0) { + current_position[axis] = 0; + plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); + destination[axis] = 1.5 * max_length(axis) * home_dir(axis); + feedrate = homing_feedrate[axis]; + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); + st_synchronize(); + + current_position[axis] = 0; + plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); + destination[axis] = -home_retract_mm(axis) * home_dir(axis); + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); + st_synchronize(); + + destination[axis] = 2*home_retract_mm(axis) * home_dir(axis); + feedrate = homing_feedrate[axis]/2 ; + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); + st_synchronize(); + + axis_is_at_home(axis); + destination[axis] = current_position[axis]; + feedrate = 0.0; + endstops_hit_on_purpose(); + } +} +#define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS) + +void process_commands() +{ + unsigned long codenum; //throw away variable + char *starpos = NULL; + + if(code_seen('G')) + { + switch((int)code_value()) + { + case 0: // G0 -> G1 + case 1: // G1 + if(Stopped == false) { + get_coordinates(); // For X Y Z E F + prepare_move(); + //ClearToSend(); + return; + } + //break; + case 2: // G2 - CW ARC + if(Stopped == false) { + get_arc_coordinates(); + prepare_arc_move(true); + return; + } + case 3: // G3 - CCW ARC + if(Stopped == false) { + get_arc_coordinates(); + prepare_arc_move(false); + return; + } + case 4: // G4 dwell + LCD_MESSAGEPGM(MSG_DWELL); + codenum = 0; + if(code_seen('P')) codenum = code_value(); // milliseconds to wait + if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait + + st_synchronize(); + codenum += millis(); // keep track of when we started waiting + previous_millis_cmd = millis(); + while(millis() < codenum ){ + manage_heater(); + manage_inactivity(); + LCD_STATUS; + } + break; + #ifdef FWRETRACT + case 10: // G10 retract + if(!retracted) + { + destination[X_AXIS]=current_position[X_AXIS]; + destination[Y_AXIS]=current_position[Y_AXIS]; + destination[Z_AXIS]=current_position[Z_AXIS]; + current_position[Z_AXIS]+=-retract_zlift; + destination[E_AXIS]=current_position[E_AXIS]-retract_length; + feedrate=retract_feedrate; + retracted=true; + prepare_move(); + } + + break; + case 11: // G10 retract_recover + if(!retracted) + { + destination[X_AXIS]=current_position[X_AXIS]; + destination[Y_AXIS]=current_position[Y_AXIS]; + destination[Z_AXIS]=current_position[Z_AXIS]; + + current_position[Z_AXIS]+=retract_zlift; + current_position[E_AXIS]+=-retract_recover_length; + feedrate=retract_recover_feedrate; + retracted=false; + prepare_move(); + } + break; + #endif //FWRETRACT + case 28: //G28 Home all Axis one at a time + saved_feedrate = feedrate; + saved_feedmultiply = feedmultiply; + feedmultiply = 100; + previous_millis_cmd = millis(); + + enable_endstops(true); + + for(int8_t i=0; i < NUM_AXIS; i++) { + destination[i] = current_position[i]; + } + feedrate = 0.0; + home_all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2]))); + + #if Z_HOME_DIR > 0 // If homing away from BED do Z first + if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) { + HOMEAXIS(Z); + } + #endif + + #ifdef QUICK_HOME + if((home_all_axis)||( code_seen(axis_codes[X_AXIS]) && code_seen(axis_codes[Y_AXIS])) ) //first diagonal move + { + current_position[X_AXIS] = 0;current_position[Y_AXIS] = 0; + + plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); + destination[X_AXIS] = 1.5 * X_MAX_LENGTH * X_HOME_DIR;destination[Y_AXIS] = 1.5 * Y_MAX_LENGTH * Y_HOME_DIR; + feedrate = homing_feedrate[X_AXIS]; + if(homing_feedrate[Y_AXIS] 0){ + codenum += millis(); // keep track of when we started waiting + while(millis() < codenum && !CLICKED){ + manage_heater(); + manage_inactivity(); + LCD_STATUS; + } + }else{ + while(!CLICKED){ + manage_heater(); + manage_inactivity(); + LCD_STATUS; + } + } + } + break; +#endif + case 17: + LCD_MESSAGEPGM(MSG_NO_MOVE); + enable_x(); + enable_y(); + enable_z(); + enable_e0(); + enable_e1(); + enable_e2(); + break; + +#ifdef SDSUPPORT + case 20: // M20 - list SD card + SERIAL_PROTOCOLLNPGM(MSG_BEGIN_FILE_LIST); + card.ls(); + SERIAL_PROTOCOLLNPGM(MSG_END_FILE_LIST); + break; + case 21: // M21 - init SD card + + card.initsd(); + + break; + case 22: //M22 - release SD card + card.release(); + + break; + case 23: //M23 - Select file + starpos = (strchr(strchr_pointer + 4,'*')); + if(starpos!=NULL) + *(starpos-1)='\0'; + card.openFile(strchr_pointer + 4,true); + break; + case 24: //M24 - Start SD print + card.startFileprint(); + starttime=millis(); + break; + case 25: //M25 - Pause SD print + card.pauseSDPrint(); + break; + case 26: //M26 - Set SD index + if(card.cardOK && code_seen('S')) { + card.setIndex(code_value_long()); + } + break; + case 27: //M27 - Get SD status + card.getStatus(); + break; + case 28: //M28 - Start SD write + starpos = (strchr(strchr_pointer + 4,'*')); + if(starpos != NULL){ + char* npos = strchr(cmdbuffer[bufindr], 'N'); + strchr_pointer = strchr(npos,' ') + 1; + *(starpos-1) = '\0'; + } + card.openFile(strchr_pointer+4,false); + break; + case 29: //M29 - Stop SD write + //processed in write to file routine above + //card,saving = false; + break; + case 30: //M30 Delete File + if (card.cardOK){ + card.closefile(); + starpos = (strchr(strchr_pointer + 4,'*')); + if(starpos != NULL){ + char* npos = strchr(cmdbuffer[bufindr], 'N'); + strchr_pointer = strchr(npos,' ') + 1; + *(starpos-1) = '\0'; + } + card.removeFile(strchr_pointer + 4); + } + break; + +#endif //SDSUPPORT + + case 31: //M31 take time since the start of the SD print or an M109 command + { + stoptime=millis(); + char time[30]; + unsigned long t=(stoptime-starttime)/1000; + int sec,min; + min=t/60; + sec=t%60; + sprintf(time,"%i min, %i sec",min,sec); + SERIAL_ECHO_START; + SERIAL_ECHOLN(time); + LCD_MESSAGE(time); + autotempShutdown(); + } + break; + case 42: //M42 -Change pin status via gcode + if (code_seen('S')) + { + int pin_status = code_value(); + if (code_seen('P') && pin_status >= 0 && pin_status <= 255) + { + int pin_number = code_value(); + for(int8_t i = 0; i < (int8_t)sizeof(sensitive_pins); i++) + { + if (sensitive_pins[i] == pin_number) + { + pin_number = -1; + break; + } + } + + if (pin_number > -1) + { + pinMode(pin_number, OUTPUT); + digitalWrite(pin_number, pin_status); + analogWrite(pin_number, pin_status); + } + } + } + break; + case 104: // M104 + tmp_extruder = active_extruder; + if(code_seen('T')) { + tmp_extruder = code_value(); + if(tmp_extruder >= EXTRUDERS) { + SERIAL_ECHO_START; + SERIAL_ECHO(MSG_M104_INVALID_EXTRUDER); + SERIAL_ECHOLN(tmp_extruder); + break; + } + } + if (code_seen('S')) setTargetHotend(code_value(), tmp_extruder); + setWatch(); + break; + case 140: // M140 set bed temp + if (code_seen('S')) setTargetBed(code_value()); + break; + case 105 : // M105 + tmp_extruder = active_extruder; + if(code_seen('T')) { + tmp_extruder = code_value(); + if(tmp_extruder >= EXTRUDERS) { + SERIAL_ECHO_START; + SERIAL_ECHO(MSG_M105_INVALID_EXTRUDER); + SERIAL_ECHOLN(tmp_extruder); + break; + } + } + #if (TEMP_0_PIN > -1) + SERIAL_PROTOCOLPGM("ok T:"); + SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1); + SERIAL_PROTOCOLPGM(" /"); + SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder),1); + #if TEMP_BED_PIN > -1 + SERIAL_PROTOCOLPGM(" B:"); + SERIAL_PROTOCOL_F(degBed(),1); + SERIAL_PROTOCOLPGM(" /"); + SERIAL_PROTOCOL_F(degTargetBed(),1); + #endif //TEMP_BED_PIN + #else + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM(MSG_ERR_NO_THERMISTORS); + #endif + #ifdef PIDTEMP + SERIAL_PROTOCOLPGM(" @:"); + SERIAL_PROTOCOL(getHeaterPower(tmp_extruder)); + #endif + SERIAL_PROTOCOLLN(""); + return; + break; + case 109: + {// M109 - Wait for extruder heater to reach target. + tmp_extruder = active_extruder; + if(code_seen('T')) { + tmp_extruder = code_value(); + if(tmp_extruder >= EXTRUDERS) { + SERIAL_ECHO_START; + SERIAL_ECHO(MSG_M109_INVALID_EXTRUDER); + SERIAL_ECHOLN(tmp_extruder); + break; + } + } + LCD_MESSAGEPGM(MSG_HEATING); + #ifdef AUTOTEMP + autotemp_enabled=false; + #endif + if (code_seen('S')) setTargetHotend(code_value(), tmp_extruder); + #ifdef AUTOTEMP + if (code_seen('S')) autotemp_min=code_value(); + if (code_seen('B')) autotemp_max=code_value(); + if (code_seen('F')) + { + autotemp_factor=code_value(); + autotemp_enabled=true; + } + #endif + + setWatch(); + codenum = millis(); + + /* See if we are heating up or cooling down */ + bool target_direction = isHeatingHotend(tmp_extruder); // true if heating, false if cooling + + #ifdef TEMP_RESIDENCY_TIME + long residencyStart; + residencyStart = -1; + /* continue to loop until we have reached the target temp + _and_ until TEMP_RESIDENCY_TIME hasn't passed since we reached it */ + while((residencyStart == -1) || + (residencyStart >= 0 && (((unsigned int) (millis() - residencyStart)) < (TEMP_RESIDENCY_TIME * 1000UL))) ) { + #else + while ( target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder)&&(CooldownNoWait==false)) ) { + #endif //TEMP_RESIDENCY_TIME + if( (millis() - codenum) > 1000UL ) + { //Print Temp Reading and remaining time every 1 second while heating up/cooling down + SERIAL_PROTOCOLPGM("T:"); + SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1); + SERIAL_PROTOCOLPGM(" E:"); + SERIAL_PROTOCOL((int)tmp_extruder); + #ifdef TEMP_RESIDENCY_TIME + SERIAL_PROTOCOLPGM(" W:"); + if(residencyStart > -1) + { + codenum = ((TEMP_RESIDENCY_TIME * 1000UL) - (millis() - residencyStart)) / 1000UL; + SERIAL_PROTOCOLLN( codenum ); + } + else + { + SERIAL_PROTOCOLLN( "?" ); + } + #else + SERIAL_PROTOCOLLN(""); + #endif + codenum = millis(); + } + manage_heater(); + manage_inactivity(); + LCD_STATUS; + #ifdef TEMP_RESIDENCY_TIME + /* start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time + or when current temp falls outside the hysteresis after target temp was reached */ + if ((residencyStart == -1 && target_direction && (degHotend(tmp_extruder) >= (degTargetHotend(tmp_extruder)-TEMP_WINDOW))) || + (residencyStart == -1 && !target_direction && (degHotend(tmp_extruder) <= (degTargetHotend(tmp_extruder)+TEMP_WINDOW))) || + (residencyStart > -1 && labs(degHotend(tmp_extruder) - degTargetHotend(tmp_extruder)) > TEMP_HYSTERESIS) ) + { + residencyStart = millis(); + } + #endif //TEMP_RESIDENCY_TIME + } + LCD_MESSAGEPGM(MSG_HEATING_COMPLETE); + starttime=millis(); + previous_millis_cmd = millis(); + } + break; + case 190: // M190 - Wait for bed heater to reach target. + #if TEMP_BED_PIN > -1 + LCD_MESSAGEPGM(MSG_BED_HEATING); + if (code_seen('S')) setTargetBed(code_value()); + codenum = millis(); + while(isHeatingBed()) + { + if(( millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. + { + float tt=degHotend(active_extruder); + SERIAL_PROTOCOLPGM("T:"); + SERIAL_PROTOCOL(tt); + SERIAL_PROTOCOLPGM(" E:"); + SERIAL_PROTOCOL((int)active_extruder); + SERIAL_PROTOCOLPGM(" B:"); + SERIAL_PROTOCOL_F(degBed(),1); + SERIAL_PROTOCOLLN(""); + codenum = millis(); + } + manage_heater(); + manage_inactivity(); + LCD_STATUS; + } + LCD_MESSAGEPGM(MSG_BED_DONE); + previous_millis_cmd = millis(); + #endif + break; + + #if FAN_PIN > -1 + case 106: //M106 Fan On + if (code_seen('S')){ + FanSpeed=constrain(code_value(),0,255); + } + else { + FanSpeed=255; + } + break; + case 107: //M107 Fan Off + FanSpeed = 0; + break; + #endif //FAN_PIN + + #if (PS_ON_PIN > -1) + case 80: // M80 - ATX Power On + SET_OUTPUT(PS_ON_PIN); //GND + WRITE(PS_ON_PIN, LOW); + break; + #endif + + case 81: // M81 - ATX Power Off + + #if defined SUICIDE_PIN && SUICIDE_PIN > -1 + st_synchronize(); + suicide(); + #elif (PS_ON_PIN > -1) + SET_INPUT(PS_ON_PIN); //Floating + #endif + break; + + case 82: + axis_relative_modes[3] = false; + break; + case 83: + axis_relative_modes[3] = true; + break; + case 18: //compatibility + case 84: // M84 + if(code_seen('S')){ + stepper_inactive_time = code_value() * 1000; + } + else + { + bool all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2]))|| (code_seen(axis_codes[3]))); + if(all_axis) + { + st_synchronize(); + disable_e0(); + disable_e1(); + disable_e2(); + finishAndDisableSteppers(); + } + else + { + st_synchronize(); + if(code_seen('X')) disable_x(); + if(code_seen('Y')) disable_y(); + if(code_seen('Z')) disable_z(); + #if ((E0_ENABLE_PIN != X_ENABLE_PIN) && (E1_ENABLE_PIN != Y_ENABLE_PIN)) // Only enable on boards that have seperate ENABLE_PINS + if(code_seen('E')) { + disable_e0(); + disable_e1(); + disable_e2(); + } + #endif + LCD_MESSAGEPGM(MSG_PART_RELEASE); + } + } + break; + case 85: // M85 + code_seen('S'); + max_inactive_time = code_value() * 1000; + break; + case 92: // M92 + for(int8_t i=0; i < NUM_AXIS; i++) + { + if(code_seen(axis_codes[i])) + + if(i == 3) { // E + float value = code_value(); + if(value < 20.0) { + float factor = axis_steps_per_unit[i] / value; // increase e constants if M92 E14 is given for netfab. + max_e_jerk *= factor; + max_feedrate[i] *= factor; + axis_steps_per_sqr_second[i] *= factor; + } + axis_steps_per_unit[i] = value; + } + else { + axis_steps_per_unit[i] = code_value(); + } + } + break; + case 115: // M115 + SerialprintPGM(MSG_M115_REPORT); + break; + case 117: // M117 display message + LCD_MESSAGE(cmdbuffer[bufindr]+5); + break; + case 114: // M114 + SERIAL_PROTOCOLPGM("X:"); + SERIAL_PROTOCOL(current_position[X_AXIS]); + SERIAL_PROTOCOLPGM("Y:"); + SERIAL_PROTOCOL(current_position[Y_AXIS]); + SERIAL_PROTOCOLPGM("Z:"); + SERIAL_PROTOCOL(current_position[Z_AXIS]); + SERIAL_PROTOCOLPGM("E:"); + SERIAL_PROTOCOL(current_position[E_AXIS]); + + SERIAL_PROTOCOLPGM(MSG_COUNT_X); + SERIAL_PROTOCOL(float(st_get_position(X_AXIS))/axis_steps_per_unit[X_AXIS]); + SERIAL_PROTOCOLPGM("Y:"); + SERIAL_PROTOCOL(float(st_get_position(Y_AXIS))/axis_steps_per_unit[Y_AXIS]); + SERIAL_PROTOCOLPGM("Z:"); + SERIAL_PROTOCOL(float(st_get_position(Z_AXIS))/axis_steps_per_unit[Z_AXIS]); + + SERIAL_PROTOCOLLN(""); + break; + case 120: // M120 + enable_endstops(false) ; + break; + case 121: // M121 + enable_endstops(true) ; + break; + case 119: // M119 + #if (X_MIN_PIN > -1) + SERIAL_PROTOCOLPGM(MSG_X_MIN); + SERIAL_PROTOCOL(((READ(X_MIN_PIN)^X_ENDSTOPS_INVERTING)?"H ":"L ")); + #endif + #if (X_MAX_PIN > -1) + SERIAL_PROTOCOLPGM(MSG_X_MAX); + SERIAL_PROTOCOL(((READ(X_MAX_PIN)^X_ENDSTOPS_INVERTING)?"H ":"L ")); + #endif + #if (Y_MIN_PIN > -1) + SERIAL_PROTOCOLPGM(MSG_Y_MIN); + SERIAL_PROTOCOL(((READ(Y_MIN_PIN)^Y_ENDSTOPS_INVERTING)?"H ":"L ")); + #endif + #if (Y_MAX_PIN > -1) + SERIAL_PROTOCOLPGM(MSG_Y_MAX); + SERIAL_PROTOCOL(((READ(Y_MAX_PIN)^Y_ENDSTOPS_INVERTING)?"H ":"L ")); + #endif + #if (Z_MIN_PIN > -1) + SERIAL_PROTOCOLPGM(MSG_Z_MIN); + SERIAL_PROTOCOL(((READ(Z_MIN_PIN)^Z_ENDSTOPS_INVERTING)?"H ":"L ")); + #endif + #if (Z_MAX_PIN > -1) + SERIAL_PROTOCOLPGM(MSG_Z_MAX); + SERIAL_PROTOCOL(((READ(Z_MAX_PIN)^Z_ENDSTOPS_INVERTING)?"H ":"L ")); + #endif + SERIAL_PROTOCOLLN(""); + break; + //TODO: update for all axis, use for loop + case 201: // M201 + for(int8_t i=0; i < NUM_AXIS; i++) + { + if(code_seen(axis_codes[i])) + { + max_acceleration_units_per_sq_second[i] = code_value(); + axis_steps_per_sqr_second[i] = code_value() * axis_steps_per_unit[i]; + } + } + break; + #if 0 // Not used for Sprinter/grbl gen6 + case 202: // M202 + for(int8_t i=0; i < NUM_AXIS; i++) { + if(code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value() * axis_steps_per_unit[i]; + } + break; + #endif + case 203: // M203 max feedrate mm/sec + for(int8_t i=0; i < NUM_AXIS; i++) { + if(code_seen(axis_codes[i])) max_feedrate[i] = code_value(); + } + break; + case 204: // M204 acclereration S normal moves T filmanent only moves + { + if(code_seen('S')) acceleration = code_value() ; + if(code_seen('T')) retract_acceleration = code_value() ; + } + break; + case 205: //M205 advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk + { + if(code_seen('S')) minimumfeedrate = code_value(); + if(code_seen('T')) mintravelfeedrate = code_value(); + if(code_seen('B')) minsegmenttime = code_value() ; + if(code_seen('X')) max_xy_jerk = code_value() ; + if(code_seen('Z')) max_z_jerk = code_value() ; + if(code_seen('E')) max_e_jerk = code_value() ; + } + break; + case 206: // M206 additional homeing offset + for(int8_t i=0; i < 3; i++) + { + if(code_seen(axis_codes[i])) add_homeing[i] = code_value(); + } + break; + #ifdef FWRETRACT + case 207: //M207 - set retract length S[positive mm] F[feedrate mm/sec] Z[additional zlift/hop] + { + if(code_seen('S')) + { + retract_length = code_value() ; + } + if(code_seen('F')) + { + retract_feedrate = code_value() ; + } + if(code_seen('Z')) + { + retract_zlift = code_value() ; + } + }break; + case 208: // M208 - set retract recover length S[positive mm surplus to the M207 S*] F[feedrate mm/sec] + { + if(code_seen('S')) + { + retract_recover_length = code_value() ; + } + if(code_seen('F')) + { + retract_recover_feedrate = code_value() ; + } + }break; + + case 209: // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. + { + if(code_seen('S')) + { + int t= code_value() ; + switch(t) + { + case 0: autoretract_enabled=false;retracted=false;break; + case 1: autoretract_enabled=true;retracted=false;break; + default: + SERIAL_ECHO_START; + SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND); + SERIAL_ECHO(cmdbuffer[bufindr]); + SERIAL_ECHOLNPGM("\""); + } + } + + }break; + #endif + case 220: // M220 S- set speed factor override percentage + { + if(code_seen('S')) + { + feedmultiply = code_value() ; + feedmultiplychanged=true; + } + } + break; + case 221: // M221 S- set extrude factor override percentage + { + if(code_seen('S')) + { + extrudemultiply = code_value() ; + } + } + break; + + #ifdef PIDTEMP + case 301: // M301 + { + if(code_seen('P')) Kp = code_value(); + if(code_seen('I')) Ki = code_value()*PID_dT; + if(code_seen('D')) Kd = code_value()/PID_dT; + #ifdef PID_ADD_EXTRUSION_RATE + if(code_seen('C')) Kc = code_value(); + #endif + updatePID(); + SERIAL_PROTOCOL(MSG_OK); + SERIAL_PROTOCOL(" p:"); + SERIAL_PROTOCOL(Kp); + SERIAL_PROTOCOL(" i:"); + SERIAL_PROTOCOL(Ki/PID_dT); + SERIAL_PROTOCOL(" d:"); + SERIAL_PROTOCOL(Kd*PID_dT); + #ifdef PID_ADD_EXTRUSION_RATE + SERIAL_PROTOCOL(" c:"); + SERIAL_PROTOCOL(Kc*PID_dT); + #endif + SERIAL_PROTOCOLLN(""); + } + break; + #endif //PIDTEMP + case 240: // M240 Triggers a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/ + { + #ifdef PHOTOGRAPH_PIN + #if (PHOTOGRAPH_PIN > -1) + const uint8_t NUM_PULSES=16; + const float PULSE_LENGTH=0.01524; + for(int i=0; i < NUM_PULSES; i++) { + WRITE(PHOTOGRAPH_PIN, HIGH); + _delay_ms(PULSE_LENGTH); + WRITE(PHOTOGRAPH_PIN, LOW); + _delay_ms(PULSE_LENGTH); + } + delay(7.33); + for(int i=0; i < NUM_PULSES; i++) { + WRITE(PHOTOGRAPH_PIN, HIGH); + _delay_ms(PULSE_LENGTH); + WRITE(PHOTOGRAPH_PIN, LOW); + _delay_ms(PULSE_LENGTH); + } + #endif + #endif + } + break; + + case 302: // allow cold extrudes + { + allow_cold_extrudes(true); + } + break; + case 303: // M303 PID autotune + { + float temp = 150.0; + if (code_seen('S')) temp=code_value(); + PID_autotune(temp); + } + break; + case 400: // M400 finish all moves + { + st_synchronize(); + } + break; + case 500: // Store settings in EEPROM + { + EEPROM_StoreSettings(); + } + break; + case 501: // Read settings from EEPROM + { + EEPROM_RetrieveSettings(); + } + break; + case 502: // Revert to default settings + { + EEPROM_RetrieveSettings(true); + } + break; + case 503: // print settings currently in memory + { + EEPROM_printSettings(); + } + break; + case 999: // Restart after being stopped + Stopped = false; + gcode_LastN = Stopped_gcode_LastN; + FlushSerialRequestResend(); + break; + } + } + + else if(code_seen('T')) + { + tmp_extruder = code_value(); + if(tmp_extruder >= EXTRUDERS) { + SERIAL_ECHO_START; + SERIAL_ECHO("T"); + SERIAL_ECHO(tmp_extruder); + SERIAL_ECHOLN(MSG_INVALID_EXTRUDER); + } + else { + active_extruder = tmp_extruder; + SERIAL_ECHO_START; + SERIAL_ECHO(MSG_ACTIVE_EXTRUDER); + SERIAL_PROTOCOLLN((int)active_extruder); + } + } + + else + { + SERIAL_ECHO_START; + SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND); + SERIAL_ECHO(cmdbuffer[bufindr]); + SERIAL_ECHOLNPGM("\""); + } + + ClearToSend(); +} + +void FlushSerialRequestResend() +{ + //char cmdbuffer[bufindr][100]="Resend:"; + MYSERIAL.flush(); + SERIAL_PROTOCOLPGM(MSG_RESEND); + SERIAL_PROTOCOLLN(gcode_LastN + 1); + ClearToSend(); +} + +void ClearToSend() +{ + previous_millis_cmd = millis(); + #ifdef SDSUPPORT + if(fromsd[bufindr]) + return; + #endif //SDSUPPORT + SERIAL_PROTOCOLLNPGM(MSG_OK); +} + +void get_coordinates() +{ + bool seen[4]={false,false,false,false}; + for(int8_t i=0; i < NUM_AXIS; i++) { + if(code_seen(axis_codes[i])) + { + destination[i] = (float)code_value() + (axis_relative_modes[i] || relative_mode)*current_position[i]; + seen[i]=true; + } + else destination[i] = current_position[i]; //Are these else lines really needed? + } + if(code_seen('F')) { + next_feedrate = code_value(); + if(next_feedrate > 0.0) feedrate = next_feedrate; + } + #ifdef FWRETRACT + if(autoretract_enabled) + if( !(seen[X_AXIS] || seen[Y_AXIS] || seen[Z_AXIS]) && seen[E_AXIS]) + { + float echange=destination[E_AXIS]-current_position[E_AXIS]; + if(echange<-MIN_RETRACT) //retract + { + if(!retracted) + { + + destination[Z_AXIS]+=retract_zlift; //not sure why chaninging current_position negatively does not work. + //if slicer retracted by echange=-1mm and you want to retract 3mm, corrrectede=-2mm additionally + float correctede=-echange-retract_length; + //to generate the additional steps, not the destination is changed, but inversely the current position + current_position[E_AXIS]+=-correctede; + feedrate=retract_feedrate; + retracted=true; + } + + } + else + if(echange>MIN_RETRACT) //retract_recover + { + if(retracted) + { + //current_position[Z_AXIS]+=-retract_zlift; + //if slicer retracted_recovered by echange=+1mm and you want to retract_recover 3mm, corrrectede=2mm additionally + float correctede=-echange+1*retract_length+retract_recover_length; //total unretract=retract_length+retract_recover_length[surplus] + current_position[E_AXIS]+=correctede; //to generate the additional steps, not the destination is changed, but inversely the current position + feedrate=retract_recover_feedrate; + retracted=false; + } + } + + } + #endif //FWRETRACT +} + +void get_arc_coordinates() +{ +#ifdef SF_ARC_FIX + bool relative_mode_backup = relative_mode; + relative_mode = true; +#endif + get_coordinates(); +#ifdef SF_ARC_FIX + relative_mode=relative_mode_backup; +#endif + + if(code_seen('I')) { + offset[0] = code_value(); + } + else { + offset[0] = 0.0; + } + if(code_seen('J')) { + offset[1] = code_value(); + } + else { + offset[1] = 0.0; + } +} + +void clamp_to_software_endstops(float target[3]) +{ + if (min_software_endstops) { + if (target[X_AXIS] < min_pos[X_AXIS]) target[X_AXIS] = min_pos[X_AXIS]; + if (target[Y_AXIS] < min_pos[Y_AXIS]) target[Y_AXIS] = min_pos[Y_AXIS]; + if (target[Z_AXIS] < min_pos[Z_AXIS]) target[Z_AXIS] = min_pos[Z_AXIS]; + } + + if (max_software_endstops) { + if (target[X_AXIS] > max_pos[X_AXIS]) target[X_AXIS] = max_pos[X_AXIS]; + if (target[Y_AXIS] > max_pos[Y_AXIS]) target[Y_AXIS] = max_pos[Y_AXIS]; + if (target[Z_AXIS] > max_pos[Z_AXIS]) target[Z_AXIS] = max_pos[Z_AXIS]; + } +} + +void prepare_move() +{ + clamp_to_software_endstops(destination); + + previous_millis_cmd = millis(); + // Do not use feedmultiply for E or Z only moves + if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) { + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); + } + else { + plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder); + } + for(int8_t i=0; i < NUM_AXIS; i++) { + current_position[i] = destination[i]; + } +} + +void prepare_arc_move(char isclockwise) { + float r = hypot(offset[X_AXIS], offset[Y_AXIS]); // Compute arc radius for mc_arc + + // Trace the arc + mc_arc(current_position, destination, offset, X_AXIS, Y_AXIS, Z_AXIS, feedrate*feedmultiply/60/100.0, r, isclockwise, active_extruder); + + // As far as the parser is concerned, the position is now == target. In reality the + // motion control system might still be processing the action and the real tool position + // in any intermediate location. + for(int8_t i=0; i < NUM_AXIS; i++) { + current_position[i] = destination[i]; + } + previous_millis_cmd = millis(); +} + +#ifdef CONTROLLERFAN_PIN +unsigned long lastMotor = 0; //Save the time for when a motor was turned on last +unsigned long lastMotorCheck = 0; + +void controllerFan() +{ + if ((millis() - lastMotorCheck) >= 2500) //Not a time critical function, so we only check every 2500ms + { + lastMotorCheck = millis(); + + if(!READ(X_ENABLE_PIN) || !READ(Y_ENABLE_PIN) || !READ(Z_ENABLE_PIN) + #if EXTRUDERS > 2 + || !READ(E2_ENABLE_PIN) + #endif + #if EXTRUDER > 1 + || !READ(E2_ENABLE_PIN) + #endif + || !READ(E0_ENABLE_PIN)) //If any of the drivers are enabled... + { + lastMotor = millis(); //... set time to NOW so the fan will turn on + } + + if ((millis() - lastMotor) >= (CONTROLLERFAN_SEC*1000UL) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC... + { + WRITE(CONTROLLERFAN_PIN, LOW); //... turn the fan off + } + else + { + WRITE(CONTROLLERFAN_PIN, HIGH); //... turn the fan on + } + } +} +#endif + +void manage_inactivity() +{ + if( (millis() - previous_millis_cmd) > max_inactive_time ) + if(max_inactive_time) + kill(); + if(stepper_inactive_time) { + if( (millis() - previous_millis_cmd) > stepper_inactive_time ) + { + if(blocks_queued() == false) { + disable_x(); + disable_y(); + disable_z(); + disable_e0(); + disable_e1(); + disable_e2(); + } + } + } + #if( KILL_PIN>-1 ) + if( 0 == READ(KILL_PIN) ) + kill(); + #endif + #ifdef CONTROLLERFAN_PIN + controllerFan(); //Check if fan should be turned on to cool stepper drivers down + #endif + #ifdef EXTRUDER_RUNOUT_PREVENT + if( (millis() - previous_millis_cmd) > EXTRUDER_RUNOUT_SECONDS*1000 ) + if(degHotend(active_extruder)>EXTRUDER_RUNOUT_MINTEMP) + { + bool oldstatus=READ(E0_ENABLE_PIN); + enable_e0(); + float oldepos=current_position[E_AXIS]; + float oldedes=destination[E_AXIS]; + plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], + current_position[E_AXIS]+EXTRUDER_RUNOUT_EXTRUDE*EXTRUDER_RUNOUT_ESTEPS/axis_steps_per_unit[E_AXIS], + EXTRUDER_RUNOUT_SPEED/60.*EXTRUDER_RUNOUT_ESTEPS/axis_steps_per_unit[E_AXIS], active_extruder); + current_position[E_AXIS]=oldepos; + destination[E_AXIS]=oldedes; + plan_set_e_position(oldepos); + previous_millis_cmd=millis(); + st_synchronize(); + WRITE(E0_ENABLE_PIN,oldstatus); + } + #endif + check_axes_activity(); +} + +void kill() +{ + cli(); // Stop interrupts + disable_heater(); + + disable_x(); + disable_y(); + disable_z(); + disable_e0(); + disable_e1(); + disable_e2(); + + if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT); + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM(MSG_ERR_KILLED); + LCD_ALERTMESSAGEPGM(MSG_KILLED); + suicide(); + while(1); // Wait for reset +} + +void Stop() +{ + disable_heater(); + if(Stopped == false) { + Stopped = true; + Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); + LCD_MESSAGEPGM(MSG_STOPPED); + } +} + +bool IsStopped() { return Stopped; }; + +#ifdef FAST_PWM_FAN +void setPwmFrequency(uint8_t pin, int val) +{ + val &= 0x07; + switch(digitalPinToTimer(pin)) + { + + #if defined(TCCR0A) + case TIMER0A: + case TIMER0B: +// TCCR0B &= ~(CS00 | CS01 | CS02); +// TCCR0B |= val; + break; + #endif + + #if defined(TCCR1A) + case TIMER1A: + case TIMER1B: +// TCCR1B &= ~(CS10 | CS11 | CS12); +// TCCR1B |= val; + break; + #endif + + #if defined(TCCR2) + case TIMER2: + case TIMER2: + TCCR2 &= ~(CS10 | CS11 | CS12); + TCCR2 |= val; + break; + #endif + + #if defined(TCCR2A) + case TIMER2A: + case TIMER2B: + TCCR2B &= ~(CS20 | CS21 | CS22); + TCCR2B |= val; + break; + #endif + + #if defined(TCCR3A) + case TIMER3A: + case TIMER3B: + case TIMER3C: + TCCR3B &= ~(CS30 | CS31 | CS32); + TCCR3B |= val; + break; + #endif + + #if defined(TCCR4A) + case TIMER4A: + case TIMER4B: + case TIMER4C: + TCCR4B &= ~(CS40 | CS41 | CS42); + TCCR4B |= val; + break; + #endif + + #if defined(TCCR5A) + case TIMER5A: + case TIMER5B: + case TIMER5C: + TCCR5B &= ~(CS50 | CS51 | CS52); + TCCR5B |= val; + break; + #endif + + } +} +#endif diff --git a/Marlin/Marlin/MarlinSerial.cpp b/Marlin/Marlin/MarlinSerial.cpp new file mode 100644 index 0000000000..e369800b89 --- /dev/null +++ b/Marlin/Marlin/MarlinSerial.cpp @@ -0,0 +1,329 @@ +/* + HardwareSerial.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul +*/ + +#include "Marlin.h" +#include "MarlinSerial.h" + +#if MOTHERBOARD != 8 // !teensylu +// this next line disables the entire HardwareSerial.cpp, +// this is so I can support Attiny series and any other chip without a uart +#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H) + +#if defined(UBRRH) || defined(UBRR0H) + ring_buffer rx_buffer = { { 0 }, 0, 0 }; +#endif + +FORCE_INLINE void store_char(unsigned char c) +{ + int i = (unsigned int)(rx_buffer.head + 1) % RX_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != rx_buffer.tail) { + rx_buffer.buffer[rx_buffer.head] = c; + rx_buffer.head = i; + } +} + + +//#elif defined(SIG_USART_RECV) +#if defined(USART0_RX_vect) + // fixed by Mark Sproul this is on the 644/644p + //SIGNAL(SIG_USART_RECV) + SIGNAL(USART0_RX_vect) + { + #if defined(UDR0) + unsigned char c = UDR0; + #elif defined(UDR) + unsigned char c = UDR; // atmega8, atmega32 + #else + #error UDR not defined + #endif + store_char(c); + } +#endif + +// Constructors //////////////////////////////////////////////////////////////// + +MarlinSerial::MarlinSerial() +{ + +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void MarlinSerial::begin(long baud) +{ + uint16_t baud_setting; + bool useU2X0 = true; + +#if F_CPU == 16000000UL + // hardcoded exception for compatibility with the bootloader shipped + // with the Duemilanove and previous boards and the firmware on the 8U2 + // on the Uno and Mega 2560. + if (baud == 57600) { + useU2X0 = false; + } +#endif + + if (useU2X0) { + UCSR0A = 1 << U2X0; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + UCSR0A = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + UBRR0H = baud_setting >> 8; + UBRR0L = baud_setting; + + sbi(UCSR0B, RXEN0); + sbi(UCSR0B, TXEN0); + sbi(UCSR0B, RXCIE0); +} + +void MarlinSerial::end() +{ + cbi(UCSR0B, RXEN0); + cbi(UCSR0B, TXEN0); + cbi(UCSR0B, RXCIE0); +} + + + +int MarlinSerial::peek(void) +{ + if (rx_buffer.head == rx_buffer.tail) { + return -1; + } else { + return rx_buffer.buffer[rx_buffer.tail]; + } +} + +int MarlinSerial::read(void) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (rx_buffer.head == rx_buffer.tail) { + return -1; + } else { + unsigned char c = rx_buffer.buffer[rx_buffer.tail]; + rx_buffer.tail = (unsigned int)(rx_buffer.tail + 1) % RX_BUFFER_SIZE; + return c; + } +} + +void MarlinSerial::flush() +{ + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // were full, not empty. + rx_buffer.head = rx_buffer.tail; +} + + + + +/// imports from print.h + + + + +void MarlinSerial::print(char c, int base) +{ + print((long) c, base); +} + +void MarlinSerial::print(unsigned char b, int base) +{ + print((unsigned long) b, base); +} + +void MarlinSerial::print(int n, int base) +{ + print((long) n, base); +} + +void MarlinSerial::print(unsigned int n, int base) +{ + print((unsigned long) n, base); +} + +void MarlinSerial::print(long n, int base) +{ + if (base == 0) { + write(n); + } else if (base == 10) { + if (n < 0) { + print('-'); + n = -n; + } + printNumber(n, 10); + } else { + printNumber(n, base); + } +} + +void MarlinSerial::print(unsigned long n, int base) +{ + if (base == 0) write(n); + else printNumber(n, base); +} + +void MarlinSerial::print(double n, int digits) +{ + printFloat(n, digits); +} + +void MarlinSerial::println(void) +{ + print('\r'); + print('\n'); +} + +void MarlinSerial::println(const String &s) +{ + print(s); + println(); +} + +void MarlinSerial::println(const char c[]) +{ + print(c); + println(); +} + +void MarlinSerial::println(char c, int base) +{ + print(c, base); + println(); +} + +void MarlinSerial::println(unsigned char b, int base) +{ + print(b, base); + println(); +} + +void MarlinSerial::println(int n, int base) +{ + print(n, base); + println(); +} + +void MarlinSerial::println(unsigned int n, int base) +{ + print(n, base); + println(); +} + +void MarlinSerial::println(long n, int base) +{ + print(n, base); + println(); +} + +void MarlinSerial::println(unsigned long n, int base) +{ + print(n, base); + println(); +} + +void MarlinSerial::println(double n, int digits) +{ + print(n, digits); + println(); +} + +// Private Methods ///////////////////////////////////////////////////////////// + +void MarlinSerial::printNumber(unsigned long n, uint8_t base) +{ + unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars. + unsigned long i = 0; + + if (n == 0) { + print('0'); + return; + } + + while (n > 0) { + buf[i++] = n % base; + n /= base; + } + + for (; i > 0; i--) + print((char) (buf[i - 1] < 10 ? + '0' + buf[i - 1] : + 'A' + buf[i - 1] - 10)); +} + +void MarlinSerial::printFloat(double number, uint8_t digits) +{ + // Handle negative numbers + if (number < 0.0) + { + print('-'); + number = -number; + } + + // Round correctly so that print(1.999, 2) prints as "2.00" + double rounding = 0.5; + for (uint8_t i=0; i 0) + print("."); + + // Extract digits from the remainder one at a time + while (digits-- > 0) + { + remainder *= 10.0; + int toPrint = int(remainder); + print(toPrint); + remainder -= toPrint; + } +} +// Preinstantiate Objects ////////////////////////////////////////////////////// + + +MarlinSerial MSerial; + +#endif // whole file +#endif //teensylu + diff --git a/Marlin/Marlin/MarlinSerial.h b/Marlin/Marlin/MarlinSerial.h new file mode 100644 index 0000000000..8525cba288 --- /dev/null +++ b/Marlin/Marlin/MarlinSerial.h @@ -0,0 +1,150 @@ +/* + HardwareSerial.h - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 28 September 2010 by Mark Sproul +*/ + +#ifndef MarlinSerial_h +#define MarlinSerial_h +#include "Marlin.h" + + +#define DEC 10 +#define HEX 16 +#define OCT 8 +#define BIN 2 +#define BYTE 0 + + +#if MOTHERBOARD != 8 // ! teensylu +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which rx_buffer_head is the index of the +// location to which to write the next incoming character and rx_buffer_tail +// is the index of the location from which to read. +#define RX_BUFFER_SIZE 128 + + +struct ring_buffer +{ + unsigned char buffer[RX_BUFFER_SIZE]; + int head; + int tail; +}; + +#if defined(UBRRH) || defined(UBRR0H) + extern ring_buffer rx_buffer; +#endif + +class MarlinSerial //: public Stream +{ + + public: + MarlinSerial(); + void begin(long); + void end(); + int peek(void); + int read(void); + void flush(void); + + FORCE_INLINE int available(void) + { + return (unsigned int)(RX_BUFFER_SIZE + rx_buffer.head - rx_buffer.tail) % RX_BUFFER_SIZE; + } + + FORCE_INLINE void write(uint8_t c) + { + while (!((UCSR0A) & (1 << UDRE0))) + ; + + UDR0 = c; + } + + + FORCE_INLINE void checkRx(void) + { + if((UCSR0A & (1<XG0f)crkgH*wNsaJR80&W8Y_$^!xWl>dLn|6m0A)kfs|m{2;&Zjj@vsT{^YN#>Kl$57+^ zk(q7^YjGKGWo3YmQFDQLmUwEF{S=vZDISxu-om z50^+qmF3G9d8r1_6xU;>roP#Yfuu378c^fr+mlhKBYqDKM&5QW0?g3tu5rZ+tEsSq zdT`_DjEwSvNpMpjF%xcxR+`eAAjA81INlm$4PUBXQIsnGM$uBCHY{+wybqDQJX=-G z^I@--)%_8c$HoC-yhbY47jc6b*20A0SpId{Q*>^5-y^;x`63O5-qznUsw$BRX9Y7T z8rHqX;X+Z8wmoq_*;Ox+W0)ZJKmhln2}~Sv95!}ab{G3sDx-!A@Yp@ zxbS|d(QFs2Hs}LgFVXGw#l#IaXIZkWnoMAN=s@t9*j6ZRB4{7w!Wi@ zwG$)5U+4d4)Bl4F`M*p(Dq-r=rV$3OBs)a+fv2{TFu#i0WhL85R0;o(UlKJ&7my1* z0)B!AN*k@s0FI^vwKp#hEmVo{4H@P8+NgwUSq;6GEZr+})sgcINzE)UhHzu>4Ky}3 zt@YgtlQIpLfWPY^BXQf3UdasE2ox~jZ_XWy;+d324a{c}zx*~?PdeZa=_XX9=UeEp zgn{;gE)#g+d#-C{le2SYJoGV4m5&n2LFXNFJrFg8FP&QZogp$N6@+=0HHSI^BsBuh z`MRp3aR1T7sTR`qVkew_EaaN6z@kpl1MC^`EUoy0qBf z;ybA6L zn(1^%cvl?d@uCjyY+8e6sznQxvoWK4(XDv*%@4L}V+WxEDaJDJI~6uR&fS(+Z*T$~tby(rncmw}3hUKcp(a zQ^cyxNa0jZgAnU;`cg~FHX#UbRR1`I|0jMmYqR!K`_u;RPku%IREbZ``L8+?r6gz9 z%Y@LWu<94)75q;5+cxQdoY39|+qY;ty zhsVNMy3auf_IMqp6q)*My(8){iEFBHd(>R=1QK7@sMG3!NjT8?I>$GGA)r;mVO6P*hTUke>}u zo#$*R8ZIffgdI1f=w&l!H4}(04&Wq6@|&tJ3a=?R#zoez;yfWesC=Z4l%j0-9&aJ= zx`yzad(XdBY~e%z;*Wi^IH#k@)=*;SE}WusjHJ&+cKfQtr*4{at?B+ugpN#v{>JX4 zInX&EN^$;WghV+QP@P`5-_*@=-uQ5dZZLI5~S*n>hVtvmM{H z?RL2^eDy6pM3dYygun(c4cLB;SQcJd7P%IAu!n;$@;L0L!I?IG_)I$V7X7gDoP#Lk z65!r?o?IxbS7?`ZSCDPgSqvBKfc1%8Xr*)Slz;UjtnZnB)RH?3gww3=->P5yVEcG$ z)+~Pv)LR<3` z&mZ1c^EOMjo*Wbw#6p19q*9wPbxn)%y>KgSYV~Rp9TTN<8u_q3L%pK?qk;>wMQt`B z(x;ibHyR|Kr$gpJ2ddb8WOOlesyp#^$z6yr-bXZ8A6 z!_O4`6{nz?B%Qo5j)I||`Hb0=fa8$$x4?vIc2D$DHPIs?d1c5q;d0@}b%h)~+BTw? zK}HSpBL8vlNEc5%n)oY=7#D6BJ42CSwyx;DHFv&@vGPh^uj0qGOY0 zkR?`{DxhQAc{7Y49A+YX+l4Rc0)3mwdYzSZ(tg2;f5!WK`RGV~z18)d*`j>lSM~`6 zbwZ9-hd#I-pl%iMgZa8DOW4G6L@%3dLq?Gx074C1hT#))a(^Hz@CDp@T;ub3EpFqH zcK4!T07*z|yqk+AZ_Rp^Tn5@uCe7~c&uj{Jw@4be_MGBaO-4O5+WPQwVMJUy)3zm) zaXxt9ikb5;Ctof!n+bq}eNtIZemizxpb}2{z)j0BNZD#5$}Ap4rpS#_w+ZhV_pZz; z0j&UH?21C|UqrFJ{eqPr#*ka;ipg&(es`3mh+@0Bi;rA}A&0|Ep?Ek~M@3&6?cwXI zGTTg#)5DjLJ7uIy8R(L%Mhq17qgNd4G5k<=H)atbvNJjo7$yw1D&@wwZO-;vRiE-wxVuAxAnfNn_BH5U>oDQ@;nW*4 z3e5Qymi39nRP|C{(VrYHg`6Bj5mN~ojO&9|YQ0V;IUHS0CJ$nH1*sf2_@cuTCkWtaN$n$9@sG#;b%%=(-OHpaCi=|q1kb-fLs==~x z{c69WnF#A^&0}zUnm|R`uXpp?$PA^&B=rYp8-*)xnCT-lMSOZe&wvL8{v>tN+#`L5 za&L398sE(au&#w-jB&-B2@!iv7{B($KMH%Shf5xN%;a0IQrf#8!1FaG)#wflSuiBz zMwfOQQ|lqr$!}R83xM`(=i}qPze|FYRu=ut;0S9>0WG8v z5yh3xn+>D>njxJ|jADsPfDUMCb1a#`No->p4F1X>83oHmr;|2lp4q}|tHWj?qLa3L z<<-I4A+YHj!qm|G)^e2NbjiJy<#l_u9me^?vbLhwOv3Q;4PM~G6@O0H(uI4q@@q4OlVHt0R}PVlFvQ-}HU7?pE*IRw0?Ox~fX6h%uE_QYHa5mR)s5Wku>Hh9A_%wsgd++W3Dtg~I-VZ$Ag-vl1Vu5_ zKCdA#>)e}&Z+C+1e{B|*3q)8&+1HxT(%JA?)Y6Idue9fv%VJ}GvT}2F0Nayz1RXyG zR;=mOcwVP;8d+?nFI}LWVcWn((`4A`$oW2q$G$mUOz@93xnEi;OQGvq*)%=TSPgPA zHfoM}oun6MBv2yNW4S&LpLY6oC#0v>5ztmnUDL9X!i3I?=ndU;AC0{s#eH=`F5Wy(o>?+|@*5BN~bK3ND>imVH z)JgIdbc~2Qg(u~UwTf5P%nOY)br!(wJbS0m!X6YPB(d%JXJz-;@!=0ulkL@gNo!-` zrdu$J^D0@3UL5}ZA4hPa4fkh!u-Kp@p|n`*i1f%Q;wE|Csazwh!yN%Z20TaoZzb(O zK6fZ8U#@0r*sZ}Nf_Ini1mdj5eH@1Li&l1uvGAHmyQG_K3RMglR|C}1x>@o8>h?%K zxkpm2VvtrK7|-x4Lih#RN=7?139D<5EbLK#dJL;`#l}k#mMM`uNbZ$*b|Cli8PjGB ztw<6E=Zrz`EAvUuj{JImf@uhv5=slTjz~P~iZa04h0M(tH9d)g z-E_>ZKGS%pIQ?~Xm$1OwR`6`e78BdzgLK-{Ogt{fF)%)0gOcf~5!GKZy>8(>aKoD? z@C^IYX)NW+n|cPWV5C(;u&$0M%WdU)ZdR@z&A?LKv-3(T~B zZpq&GQ|a!)EAP8-kql#7cd)mJ-XrJ5q0;R0bOjX^l{glUrzBZ@#ez5vyM2BtL3t)u z4c2v~`=%VK_qI3a0`Z1qC|G}g>JzYzGt6}IMZenDfc5cX%Z~MHfj~lb0vo`qyy4^eYQ18|Wi`Na&A<_37?y%`k8}7;t z!jgCwE)O_jVj~{|3NMV^Z z1THGxLvoE&Ntxb}6VdHi4ldODx--wM?SvhVm-G%UPIgiSSJf{$VghjYuE%bFpjBS= zpfnxwW_}S_eNSzauoFi!SFo_87nE58r=eg<5W4;NNBRaW<9c`er0-?)f241=f77@5 zU-Yd|Y{XhBmp$lzh)fcGLbM76Fa299Q_8Y{+5(n6IFMS7sV9ON$w66}nn$|Xu&l+t zgo^Z7q(2xE8x%7kAsC)ooVEp(Qx^knAeiaBi}OlWFDKo2Rm^ja@p0X0lK-*&D96ie zmWDMG#4-U}DClR6t_@3j?OesfaIJucj@R_LsP$v3=(1nb?(Wxmzceo@7X8EcR!d%Y zdJBjepFB(yTRXMl(Tw;x;`kh(+}t;jVK*EEu;(VTgeFYQN(vQ~1m3Wnm$!5=6xuKD z2kmPt3l!QcMikEm=K>`pN$|me3!#qmKDtzt$7@1x4WT^V@U$mQKNP_2F41+#+5plw zqt8t!s!pA{!sg@#k2Fv+Du||MJ2!s)%aD`@Qnd?*fm^1$$1aDnz%Sz@UR^}mI&@y| z;7`$@NA3O{1nxi(QGy_j_7j>H@5fnU8b*tPggg14qtHA^kO_AwzMNrK!oFS5a$$}( z#&lJ_x$Ia=7eDxQ6i_H-5Z+hlb+aUao18xud47ame6fOLTsuoS$o|rJ7nR#c%{F?h zb)ozcITf=!rJu7=yl|+XFKsn5uYsF6(fub4@ZhAo_-yLhR#18x{}vTYPjZ`Sr!J$8 zFme>z<#@^SJ{#VBkGqvIC4W?2Tw=ws;d>8zA7Qd+A__0#P_zU(SpGkfo8=gtE@y#i_2EpcA!)Kgz?ctLZ4_*6znz7$-y zhznM~O+5Xi8;5jIdbqloNNMG@;VS64Alrb-XwLJC1g}|xyWL^Zdft&kPB2CQQ{=3D zTtbMLvTt+9cS~^%HZC{`fLEQpQY2<0dEqT_VJx7p$IIIDG-)ZptX@WNawUGDm?kW9 z*FL+d)b)nXwVwCQbXsakqT>S6%RlCiRlm)`@#w-ZQ&S%xLrxh_ucsy`GjdDbmc{v3V)>LB*U!q7DI)wKst5~YUFe%)5B*Lr%=+F_OtWpS~ z3|Ne~i=)R}J(iyEKqxrbY1-dTfWL}!y76|e=54_$LG|uG;c|z`f^v|r8!6GT4XGj6 zJIF3v%DAm`-e7&=0G)`grd?Y-i&;hR?OJMFB!D+EJ<06RChn@T9^J77UhFM+#-mSb zTF41Iy^f>G)a8D_@LU|(&A1L`Y~(N) zDxH&JJ{0&}1J#hPAiMa+I5ngWx;-ZVSc=)UcL7>Or^n?|{^NU#Tdya=7Kk`H%i zx(K!vP>zVTP4IaKDbL-rPKugL^k#2IUYO`aYYJtFzXKju<~Sn6;&J|p>Mq<`dS*1tJAb;2s^ zlcT3(hb9X-F4jok=R%misHj-Ve3G>OgcZA*49%|w#l`^$bVUpTOUlCSA-dDvOUlUs_XM4^9L|FsBL|Lj<)Y&ivAPdLPDuxteMFQ@l15y7V1;7!n z7qqgOfnUQ8Q$}`Mt*QR>X7raL-m=uH$-d6-X)uc>`WkW;Tl|btj?#f^Bx>O>p)P3? z?FZ9-brSn}dRpc%o_A$JFCj3+10kJ<>+)39G4ayT z-M-uKw??n&>64&glw#tgRIPaAPRWX|`h$+=RS#*$)}s+EEdfw4U<={eGj-np-)T%`+RouzIZXhMaSpvi`8 zrP;DR8Pdmj6QO*FF91AE?dv(W*Cx$2z1Nndw^{K8+%3E-Y_zR2nU-YNo9DXk^QBxD z54Uz(OB|KOiPwm!Of`w9Uje1-w?zPP4Twi5#Ko@1_N=t{(hV_dJ`mD#!Y`jmfzTM0Z(rQi9h9`U8i07}L4O zNt7~csAWp=HK$&EC9M7f0>l8b{+x99-0Y_Ma;vK$jXUBle2)Vj_^Ln$;%D?YvG-Y_ zt8k|yPlc9B=uXqGGX3yu!M6>aW=V zGH@C@leo2>}5HS}ME?>mi}pk~g_<(CYq0#J!NEm7ZG z?_z5_WlxYn22{PDBT{pZ(6+E2GBO?a4?bXUKz8d3`Ex`$j#}3SA#P;{xxKd^l)?&g z!Z_~S0*=l&9vxXt(n2f8EA6z=j8ZivSa0>*tLq>1_Gy)o#S&Z?DQeUncN31!NE+xY7OKR>6eCk0=}l*P zQL!sYNAtwTumY!PYOcICS)K4qhwXcVavym=J-iTVihvv9q(2 zY1~Q1DF}gP<^V;_TUp+2&z=ggxxF*G7WX;FcfIt!fqUj4C0#132#5j$Vg{LspBKe^ zpcWvqJLKYICft5R;`a=*mgr6qLskKOEPXn+pOO3QaHl=zwnIUahtk4CEE43{4emYb zBPQzAGc7iRjritQ_gE`40j|W4Uye(r{y@4`x=d@9ZtJtZyI z$P?Amj~crHh8tV?^XP}$OwBkvSq(Nw>^+yAos zMTVSV@5EYX_1S$xv_?N->}9QeBO}qNfs^kUbyE`_d>_wx+(?Ex$<)Z6>DDJmqXZej z5xJI#6mTE-u{yHWz7EiOsv{aM2w`2~szJC1pCc2CA z8}!Xu;hUrhVaSNrPWZ{WBnHxP`^Nn9CU2(!ogKugAPN)~qt|TwB2|LUULsW9u@Bcy=#y%=suI(A?~Y9i!r_BH2$OeLq2YnD-sR+KeM#Yx%pRwdhnSb`q9kDF z{U8x7<;DBwHL9BVq@;DYJQ{gQz>@1N77P)jm0qWSo2vvLxQi&7+m!XZj=_GCygtS$ za(BVuwo182xLVX-L|8$gVvm6 zKlgy%&dAGrTU6~)M^wc3f93o~)3<9zu?_ijG2%XxeE*QeWB!+mF=h1`1`hr0Vtl<| zHJ)K3ku_v%RHvi*mCq5o_zf|9o(r-E3th6`P&Ook8u2|N7*FHtLNqTnX`pV4s(rkP za-BUzKK&DP3k-%1?9H8zhuNWPT6nye=ds)6v&+<5m)DdJ<3!pDew?H}G%btrbJ39X z@39JZUqjU|V-n*6^5ZxNFqMwM$}7H>LjQUoW$NWerIUP@J(u&I+1^< ztfb##M)!j@GAlFt0u%;CC=_sP&Ui*bjrET_`f2skinDx)ra3l0rf_7AW2xA;J4%SBK^UeDDB1w>KkOH8zgX#$(a1 zC)qRspg3;dWcmR85(lF{6b^S(mV19;ECgkGoRpFHSe$2DHIJk!ydI?bxK-+un$jdU zf&1}4Bls?`;5E&9c2>Q5cFY+)=@T|Z6JaX=Ga^Q|fCstH7p+`zg4Y(=ib#eCg)w1D zS9p5ausG-7mVVzZ(yd0UN-VA{*V;$a1SPLzT`JYUmU?J~06=2thw@GWGe*60uCrP` z-v?Q$d6|8*NvEbCcTL0L^!C1Yiy_r1@UMoWv6y z$3JCydF^`|el!y*MVs=Ie!Lx{;xfgDZEXO;0BchLqOzXCoN~Sb2aC}1AOr!AfkVzA zm7c%EtOJ2w!G!K8x;_OSxIX;z8JAX!dn%h!Oi($H(N?s@8I_Az9|;qy?H!+av3`q} z+Fq_PZSgbsNvXD+f|VBZDHf;xJCAD|l+xoes< z=x7~Gm5J<@m_D0~tDa6-PAfCos>!A2=N7yi&UD5c6DCLjsA#^iC(`MNBmCNt!o5=< zPsVyEcbom{CTX#o(eMH{@Vn&RE~$If*^VC2Ew`cUtOLC4#kK*wGY|MhZEmk@&l8LP zRp4ji15(_@Uuug3c59_T(Y?`?7^SE3z9)26-nFEfQ%%uHI}u=a(O&o}AdkxFE(%R;f*W$Hw=B^))lwFP4UWU5=_FHf=_;|@i;q1BU7s{y4 z!4vnxJw`hID5Nxemlx9@FpoMm!*kJfn!iJx&a&?46euQu(p8Rwk^F%Er`-n{sN2EK zzj*7DwEls&IR2Hs`VZbRRYv!L)nv1QVP#&O{foB@ZHi~UAzDz&fk9Rl$Nh+4|6*C( zKza+dk;$;(LZUStECY$H*&=C)qM_Un=;t3P(vytRoy&Pe&N!9sO3r%!)9&BArEuwG zGdRuw5A%|N0>{vO$q8&7tFS-4r}{F+Z>mrI^pmoGkDmLlFiApOUXhAqj@HKY)pk<# zPYevC@BxyU^p~?lLYS2w2X4i3L&T2+I~78gLeypiv+?iBz+!>lxR-)jqu&}GmDIU( z=o)PX9Vyo4A89U~JdJ#ejQZ})?~S%=RYNAE%8w(0pY8|()VlUn$cO@pVWnU(zV4{RlUUj;czek zGwCMhnY!Ie=nOC3e#H>IbDa`D-`pYfNnJ)qb3v4(6CQhlRE4<#e11@0$y+ZI5tkH& zYIZ#3mSLBiGV~WsYlx7a`lN=D-$6`+9lR#=ngi`e1nTN8(<5DV0eG(Bgs%5Wj;t+j z1JuBSv(}RDHV?fM{^ECAKQb%3=(TSzGDQKeB?qJ1@8hfzCPDnny&I2f)1?8vKIcK@ zk4dq}?@zTv6)Cg^#mW|250CJSV+!>3B$+yEWs$i%&{J=D$Et(ADo`@v6OVi0<@7rg5jk@3P=TVgO>BmC#b0Imt;-hhaUD3w!Q|otjWhhxIzuo=1 z{HghXovjxBGF~Ca{KtFg1o8gsJ z%?+)i0s%S4f{--GUj+=0nH&++}Iy zH^2PSXdy22Kp`t3jFlSrmhV$~X+k#TM_curGe~WqCs{2MCDXOp<`g0K+YT$gtJH_6 z2nf0M2utuJu&{e^rB@VOb!JDoe|d@0LLP~G7dTXUjUPgoVI6$;-m{iiy6z2B9~x< zX88G?i`STP3!_V~z^Ym;HR`1}-O8yN(&553S`^kR*ZC-Y6WbAW5~Rme|5l_PFwlB) zE@iv?(Bi>hRK4w5-ZC>3cD1IUR)5)r3h=#cwFjTrt(E%#+Xy_@g7sk=iss<| z5H$GrwXd8$$UnQ9HXmYNId%x9Nv^vTe0iT9!<_c2bkLx7y)TcIP8eam{jU8SL#1Eb z>YPu_PYit3YKvG)6ks3@jb#=dOulWo@lz!T34MI-xBmCtSZIM8R*O$Q#Q0}Fj`QDs zoSo`lejEZBt2j-pDHcYCsa844Psw}>CK?~r(p6QFJUPjv?+F|!zfA%O!1~i9diBC+ z-RPo7W`bqpbewncDWV-rqJHcWZ3q7BPnLS~zUr70$YCuiq{zC>zPrnD+Uz{q_yT7N zU`CPBgMhVvv58$_-gETYOXkDaRF zU9_yeulwX9=SIWG$f(Vp%)6sos`K+P0Pa}9rk|m?&ZdtDlrnZ?ad^=-xmwqnQL1tA zgrisOy3i5hH@$UX>`=TBBfmv%k~SNWz(h{a*|^CgYnlY$&DX-B^x`=dl@qdKOME~3 z&xs7aE|rh#l-#wkx!TBR`C`Ss54Or)OaPhiZI{Uw^zBq0mmd`UFrW=jxAUtIxo)Rk zpk3ioVnuagsGqAo<7cMm7MiI%dIb+qyzqw`IDfj%YIec$qU{PA>3VPAOxE`Bzzlp? zOE*)s*%^SWf|LAyvb3I_eYq%L$=%_opL5el>Gn-EF&Eh?0KS=C6D(@bfXvE3u zt|^sIY0AGZ34y5shLp2{nC8X<;T;up5tih~Ru-Dv(91pI){{re*pYmp%1GX@!jzvy z6ppU@#g1x#Wy|cWnxy)9+)Gx9KF3#tB!iKX8wyr(boGn9*7LAfVCwCi%18n{B*b%l%t`58` z&}V^tl`2=Cs69L+;Ox50l|f}2=Uf)iAId*;!%N8usow2vtWWaHoJW1@4PCLfccdFr z(skRw`7*nYOA0!NbT`VGjaGu=g!3Q`e_-;|0cjn8J=$lR&a>7kHp`Yw2huCx{8a9K zXhRVEF{|zhe6;j6BDsRAnxZvh^~CL)0DMr)6K-znWkYH+%QrDtbM7+XY| zhj-?iuZnx;!=j#b3W8I8dZSCVxWy&I(~oak(dRygkK(nY*#VMmfFdvsEB%g7SFMTj z~tLre%OOO}++#tQ7Oe|1y*T@mPPZenA? z`1hIlud1|jEd@KgR?KefV>g`fjap-=CSx(p?{!Iq;hZ5wayre$6%W^HF|1H6OZB`2do7F%4=jMi+jgIN1Kyg#;LV+$|+ zoKc;wqDG^_3$Hk@*u7)F2Eb_69RqV^hqQIK#xSHrdc{S6?-8c&63AV^Y@o5eI9oB{ zA?1p|2{2yyoFIf*Erz%am6H zP*||&Cg^ zaX)9kttgtNVliWfx6v#a-iiz}!?2N1Mo{Ev6*;Nb-+2LF9_{q~b~=6DPAA3~w>ndF3#YmJXfs{?(?Vu zI$ie8*^Q?#_aQz~nSIIMt zPl~w;MRl3yJ0w>!7Dg}Qdy~sj)-u{CiQ@L6knf^*mJ0Cx)q3@|AAg8w@ormDCw>ls43Jc~Z&G=b@ma{i1sE zEnTD#I|<$nW0tNw^G>#RQ+hfVWn0Z=IrfRhmAc5V#Dy;xjif9obk`Xto~yDTyN0}M zR$x*-KEIzAt1RYKvIR4L3l%y+=gZ|$6wgip;4!0&Ci+;YD%Ufw<_-5R zC=-wqB;_HxXSbS(FZOHFEkPGue*WSWRqlkkU}xpWUBM_mk|`t1;%e3mN^USdq0{dl zd?Na4W6iN+R#Z^ZXCeK7)#AIDYU_@psJn12hZi>1PPY(9DtsfwDb`GRE!+NCnAo-i zl0Uz+B@GYVm49EcV#<*wrGX)>}fVtxTcnzp1g7fW1KpWD_KJd$8>v*gE! znTKk7wk+EwSx2eE*O$;kG_nO{!dYD$$QrBxVXQ2RZ0Ra3R9W+mC28dr890EBEgfu# zK}DQ1EAGdk+XuSVz((_PH<*%Nfc9u5R4nx1H3TKB__#ynSy#Kk-xh(Y`=cQwt4Ns$ zo>%VCOEj~d85hu!?NV`NyQ>;uwE2%DN;E9)1Qhn|Ix&2uSdn* zM&(gMT;lVr8?tC!e>_z33gv)Skt?dtJQL1xi>z>+B^LaB94dyQK2p`P!+Y+1&&H^O?Wl-%b`95a)PE?pO;s@k#Q=MP* zN6`bX&s2l?NyhAV4N!!;x83Ev*1R2ixEb3{f2IAZ-}_mDI$g8ow|76ZY0SP_aiqwe+eC5xIu&<0HmZZ!M#oSr7MmGP3RY!VbAw`2d3o! z>mF1_0kTs2Z#M6#_p%>$R+G0(Cehi2JO=OzEEN(o2}y+DDY5|FzKZl}-4u$cFX>Tb zzcY)}FTU^>c$YETYgAu!VUsK%X6!TlIA%D?1?Ff>TmQ<;vh3uRRIlo6g6cY%9KvFa za&%Z`V+;O}!5jnp=qy`(HubCps3Xo0E!wEJ|AvDpr-SV5INwqUcGIz>H?;ZQF-M&w zior=g_+tg7h)eSJo~Xi47HVD3{TR}PM&7@Y@RE^@wGgq+bBu#92TGEcOLWf|+J?nK zeX-Hwtgus^Zn1g&B*l@DTiePt(Y?E%e(Z1@^Jsq8hKKjDX3vV(wWu6*WsD-?mq%?p za{x1^$-)>NvsZu+(eCPxk&6fQl--GWVNbfw6>bjH<+N>kWt_P7w6X7gn0Kvi2E?|> z;P{I*@CT4M*7;I@%x6@wRRT?l?UhZ76It^jMmEI1^Tq#mhhs?CRXX%AcS7;oL30O==GU&yN&sC4;cMqb{Lkq5H}_1YIUR@crNnpP{7 zjI5>!keiW0CN?%YXMS+uu=^E8qEe&PG8K*tH}q;cK)%0Qm|-xFJ64XSu-heSXKx~n zuCdYZdVW-&nRf=aLEN$vIAK5L988#vZ1}63e0g(S;gE3v)#ynKUb;>LEoxX~MXmDJ zcmfUZ3=wo4S%8qo>GX=Q{HjUe&Cdy@zPaxDwi* z))jlOaf+Vwi~jTWQT54&GUWHqvZ((aVR0m{yj^^{FB_jx)~6@)S7U>*qk)@+t(num zdt+Q}ti}Fyg_+^=^WW_;9rII`;3Oze*Ip!7#7?o7wh4074o=j;I-)Ni`StCy56G4> zcK}T3ynr8egxLmNS8liVuN?5ty(o?K_*$zV!nE15uDjR19@>K7;Zolzu*~B7Fv;*k z7v^@NA|;=xCRZgARIK-zO7`_}A|1bxk-8AtY(_EQ#NV>Yj>A8bd^OgcyQh1d@ZVub z%)$t@S8n}qd}w|Cu;z@>+AUAag|hKf>}eR;;8y$ziw-TFE?hKl)v=+%MpiQvBgZeH z;dp+={gO~neq=5a)09&{&HdsTqdQVtezcr|zvdY;G0}4=P_*-pDLS>$41>E*pmaXr zB>P9e{*B+?F5v$UtzVyLRsV&S^6sHBTx-fbsF;}>#Tn6j%HaiVk_dRuCLd3q_tw?^ z&XWn&Z8(Xg8FxbiXrMYz(MA8x+v`gMI9g(jG~Fa=DD5{cq*&xoP93pP35P|2ge*g{ zP;QEk@$X5jxTvLf=69yfJz+_?28MdWk!f)*a&z_9oZumuvX095y;2A7cMC^{AN3nt zmf?)@zBmmh@{n_1-HwD%zsllMnLs6D3Eq7ccY?J~eOEK8kdCrpA8hJBE@N&(E2tba zmx=1aEnsBkSis3dGt!N&Wncy@-~jcZ+Mm%w?LHCt?@C5lk(qM+Ib!_TJ@aqO{_37_ zGB+`C{@-f$_ZOD`XuzsS==rN#E#&WRHC`!g@}JYQx?c-*4fup4H#oHR#H4V}FPIHO zU1)ae3f_i3K2}C8-wr4p{v_!VBQ{nD5wA>h9VVt4X(U3?;TEcH*fHjwH10R&rKD$Av1IqA z2FM%IKS%k^%r6y&k0|xrM-*Kr-$tE^s9?L0Z4tZ)m91=tobY+0c%S(q3#eK(wuMJir zf5YkX?O&;lfh~;_I9!nm_h1@%j>Ma;D6_P=)rW3ilyAJE+xO83;^9};d_RxzA>y+w z=$@3ko%$)o9rr^ZUy^%R{NmQ%Q25LZkYnY81W{}=K6VFy{U?>Febflw`cxOo&t`R; zf0@~TQJMc#mMAqjr`69+Ww+uF;Q}wFLoyp2*{{K~g%e9jh1~ESHdb*I8fbC*OKuc+ zBC^P>nsyqo&Fu>#^8f+m1wwbZAt#SJeV{J$9sLR`?M5`%*iaJnB@16bo{yA z?`)fv^>vW`WW#yZBJf9LN*J1YLL=4^8hK0!7Ah>E5{VK`EPrP0OOuqU*Z8BQzhYE= z`F2Q#&oc%QntphOmQ*f`X&Jn{qOh8aZ!p9&J>8Q0k094wM{6iWnLOlk*286E z>-&_v${J~HX1f=6j9lg2Ip`py&w7z{N}Z>upN24GSThsG%R~}*^Fx_QcI_B+#Ovuz z0h)MEn^1=~+Y)#!*5Dd8+h%xA3s6;Sf8_95Y{1=YKoC_q`(xqTTkupj7N>W-3JBVU zr`mH~8xLtE-{yS^ZhWu%3KFgyjOlvzdk9nPJJo&Nm+$yj>l_-8^TcV$lG@9AUxF~@d7(sih0$ax5L&*+6@FLGb}t9$m2$?N7PPaNH7 z>@mT#iq=k45-ch@x!K0y?av}qE5Pbes-Il#QO$b!j|V$iek;+BB9t@!LUU_4NQ-e@ zPh~C_69MXuZ!BDgq{U03TUO0pH(7Dt%p`@nAB5|Ox^&LlL4IR)_yQa0Dvl~_9er1p ztyvl?&+CptUmaJMa|MI#F0IQg=Eg|qpD5Orx9SFc+ut5iAKY$U40BlT6$hrsb8 zUaSa_{sjtIca8-T-^~T&jl-=M*Hd)hc9eE)*#tI~Q7J_i5;%Ce4hE%N0%bqBwhp1QyH z&=13plaS5Yg_u@DbBXB64~9FK_STN-N>NwY+=#`!fz;RO90O~PR!v#6@y^u+s;u4(dwS6aek<2Tt-#F&xDDqKHM`N1 z$F)s&q3=c`76ddy9pAaOx#o!9m*nDZ6XEOiADt*t5iWq&MQR9Qroz-U^ThhR&4#WPv+6TYlwF(kLBYzl)|K=-Ln<#=e2z$Y1ObygKY_cczP+@AU9bB*TICm8izbMuGaQRzAF68lxqxGNMS zg(QCuqqv7)S+nJ*7hq!1M&t9(gj;B_rIQr{H&r;J!=bmf$3p}D77RN?mDBo5&IFTo zVq0l!=$>lz4{B^3ZxX620(vY;Zk&IdBI*QLMuEAQDF3cEnhW;6wI_z|N|?k-1tKBy z4bE2q5>S#~q!|)y5;I{Tp8W-srwqGF4RU0JCYq{a;NVr7UU(=G5EF9iGhI)vrokfUg@RpUx z=frU+Y(&tINOMO(|7%X4H$k01wZu0n`hss!fETk};WVxk8eJTM@~=7nYy4Exs7NWs zd6xH7K@ND=e`$Wxb$IbG+$iY%mUu-}AH?Mz?5fMgv=M)PBxB%+Qy{IdqHp0d${4L? zEWyQ>A&=!2`K$~K5LbSrEH7Bn((55kJc(|f_T4Uq-t6T*eQIRQ8aKOc^k&bKfX`gOy*w zJM#e;`fQtcKEH{&deY3UURJR*dwDgxhGZ^XTM15nggYV6nY#2`w*Odyv64{0_k?)R zPrT^<$8`u|AP|b`GhihD=L&A7e{IW6SS4wER&YnDm>EWQh0sNXFooAf5K*ZHDqC%4 zSZarp`c4PJp_0*rIETd$DH>xjz^k>LRz)hqUF6FIGt|kFM^;5Vfxdyap+IN^KY4Ao znmH1%;z;!;@;T)?UABJKSYEZdC1j;X|1b95sYw)|OS>%Fb;`DF+qP}obaZsg^vzt&&HESfBIC(i`&k<>{EhidRWiYSq@Q-XOCO8mnTF;JuN&w%3Y7)Syj;R(LJr9H6ht`qM;ONqg-Qj6Q|Sq zHw@{1&o18VR1^2F!I!B2DHp6Bu(nT8A#m|(PJ4I@D|_jX*9<1pEEir><>#x()MJV_ zleuo-mlrH1!f6MbPWy*DeILm znkvXr3LjMjRmj`4P--ntzaHx`UFXxOQnDqDT6GJJXT1@;%P=EW9rB`+gURZH3*Nxb zvfuPpZ^!1Ta_-eO-?v&-?6BWgq|D<`19mYTI+A8L8+SH_`4yMpFaOoN)p{e7-SxlG zsyh{)FjtV8c3D5JJth2a&o~g?`R$(Hqw$yTomT>vWohc6NntYQG^S4DL)Df;ml!9m z*;#g%XexifrI!9k{$1D$r>bBoxp4-00*dO^c9$FS^$u!@>#ahU1wFm$Y^?Mjm*ztB z$K{x-+d>!eDQP5LG)=AzJ3eqYw#s-0>xM^^+-@2z^S>avL_4LA)+$81bFVBcj>#8o z5Nf;?fXl&}{ingKZKw9YnJ4RDE`DCQN?OCGky}FjWQC){Tn-M=H{g$$vc38Si8ZPJ0ifI6E)ox}U?`RRcu&joS zdH9{$x&4&;Nbx&gq#n-3|Mkk!8tlL#%HJMPQgdfXb}+7vHr=R>e-Y2X4(iRLX7hPZ zucU0yy_p?XI!J66-o;TLaV{TeoNvxQk~D0nkGDLq5)e8AUGNuH`*~(hyyI(y&G6%E zyea&PH_&EftYV!KcPQCjRW?Dj^(MB;#xrgw1#dzh?lPh;S8szHk-uc0Kz*0D1m0-# zxbl7zTZ+D}fz+@U(3iw;oV1OUA0g+`yfkz1mR0>_5s3j0=>FG-@Bak;|3%gQNBx@p zKfM1xy#GJE|3AF{{}0~(KQhn%`)2yDiSqwMp8rIi|3seuM4taIk;hXlR9uA~0ASG; z008U%{^|a20{8!5Z&#TXiIt)$ue)l(-k}~h&ceNM+lG2KOn@P71ph_-kqaNH|c3Hbp?{v5(&n*L+{zY<9u`~?_fWdKaWq_rS+A3uLh`UKEF1} zp*o9f<99Y|%DJT#Ur!$o-s2~D$<_(P@Q1T_k-gcCUlC3RBvF%czJROmPLJ)gU#zs> z%^0Dr=T2QPyWSCnUT%C}+&N;&yFLy_G!NjvopNiX-<~L+bQf=vxuvm`q0P~|4`-cn zzxDikk9ff0z8=t-C6OOqk-eWmeIOv-k3Zk%u*&lR(1C<`3i_4T2gEm=b2S9H{QLWh zT9@$auDKPxhQ7m6cc6p5#e6+?BtK6nM9O$VnjPwca@To4mqZSbdf&0 zigPP^xS!^*_pzEnKM^ZkdI29jdup7Qhm3klPw-mMLVT5%v!A)J*yv-W$pD{#rd!e8 zJ4@5w+oTIKu@7yyJJH|m@aW2q9M%_{aG|BeKCk7#R=cmDbsr6ow|bb}yRCV`;4nzs zDZ8m&EqmP)W+;4`Kb_0DkM`)DZx&w=Pk48s;lD=?XAB@@eBIvKpSwN}QQR^wgW|ty ztln_6YQ8UlJrtt^Kd%$F3tc}gQHlFZPlGFSO}PpXKgc_9zr1`hk4#bXzJfWKvl9)j z$Zyg@zJ$4*Eq0Hb5vj9xy>jlk;O^=0m#44GNK3nHyEEClKA$@Qv)@Kfoo}&ul?%r2 zZWlB?e05d*breKQdqh|;ziSg|25uqqI;dA2ysunwtf0@uAiv=>$&IdygvB!(}#H?C)B$kP| z$tHE=MQBKH3-9H_pdUYgp4+63aCUY}3ZL4Fv)m+v)|+Ot3WV9xnp}ctlb3Z8-yB>2 zJmK&@-#0Yu)AsPkLSJ>1XmJNsGGjbnN;y-Gc)1#TQ*~uw+YxA?ieihdS07j~1&eFw zqznggw^YvEQ|DwI%CdG>o=CJIu6VelOH#@-br1z_7tD}$ z9U)HTP0oJuFg1p7RCe{z6Al*5`j4TPu!ogaK5wL;b)el<#{uY0#C9$rpnEP_<#v2{_1W^C5rqnY4s8-D+M z9H@-c8?W?eYG1m+yH-;&2rFK_NPAA)ntR#Qj!f|jGUvhnvNBYjB8uHpv$-ps)U+j? zHe&`nE$qd-eH8F|1=v>#wr}5rBs!lW8XO3S{ps4S1i>oXph0!Tjy8nxUt#PLBZlNU z`Ld0x@460iN|k7dX?guKsH7bpx7<6U_=`BLuZDn>V-K3Ei_hFj@wN4!r)PX9e{q=e2!p~6@%`vd-_Lg_F)Aalz9K?Lf2Kukf5L#e z?}HG4kFFAwng^M1#>{3Lc76{lIFYwY3lu}*Pz|zfkLNPy((E4Us&$#fTw*UeKlts^ z)iSmB$COG%%Bviy+w|5WNg89q48g~-R`#Tg+^$VuS_q3%Q=x0dvY%oLm*d|WY0^!<28VR*2Gsu>2j~*I$Bn(J&tFNvE_lczECf)(0(5{W>S|L-Huqw;g0ihWv#>r zEpscaqiS8qhAp?_w3|?qzwM^<;1+48owW&OcUBq|WpUT%a05k!##1u0H(D}}6;Rbw zK}@xwLD4ZUaVuc99UmM@bgmV9mAHcOMAljQ`xRK$?rCwRZr=ObObk0n$(wduC^5x@ zAh~mpP4*SeUsKkI9XJ=~emG@PA=pA>tBC&GBxXIxwbKCEZG9=^5ow3V@;yB;sc<@% znaCB3z@o-mnGdIGJ|r_2s}zDo295Bg-PU!7)JRhM8BG zN%^!f{MDV9CLBMqOJV*}5pJsMYroADdH7G#xy3-2o6<8?M^2Aiiw_{P6YYCbR0j=p z)fp2mBT9Gct*a^1)Opx(6pyl6y5NIb4$n2dtj>f^W&>?JEJ=LVK`1;%dOR4XsXjrA zUUpl~T6YJ>9fg6AYgx)9*zBfWMfnjMGMg^7TDoRL?Y|m--jO{r?Z_G=1C7?{SOk)X z^!aMKDKuny4vbpbB1{gK|E?HT?{w8n zL1T;}RmEmy2Lm5mk`UB(U%K(KD}h%Gg6%&iJ`bOdN7=$M>Ig7(F%IAVHC+U9 zdLyoQs+Px*EttzJV4VgrU?Dwh;7WFKAvwWc|pl7=T$`Tr)z7tg^CbmkZtI zI{E~erL3lEI#9ccV4l~8csdpv@ozzaC5KDbZMG2N!-G`Lh>L7 z=8OW)L5YP98~IWUvzTt`SknJaHWq2$4JWuZ&Ddj!C;MU&1#Zwo%6>1H;gjdDK8UIT zjJy61^6V8yiQZ?OzyF*O@rDucoT``6Btpo}uEt*VC?m&^*L2}q*|i<-a4JhBSlu6g zT^_UbBotpgpJvu=Lh%a-A0c%8;CC3?aBo+d-ZEKeYA%#Bxf|sFv zXyE$Md(5ExE$5DVSH7?3n|%Abe!g`?5+CULj1Oc;LKY1bJ?{?Jp;Xkl?GKQgp=M4` zc>rUM-lLghv0hDY*Rzvm$oOrE@EB;RCciQFeu=5G(m19vuYmn_b8NGGAU`LtpwM?R z0ie&*SU;!VsU-d3f+`=gRA0xjmfEr3nXte2zu*4vz+V_%@v{$nsBTE(kBV7$si%;$ zM*7dA-99L;KVpG9@ZWAsvxIyHD}2H(o_ z&MwK?KnLGGG5GdSAGmD4W3+k?SL_C9N)S+x9~Q}MgL{Emxr_5WgVgGUq7`|Pi0z{} zM3QCoUkgM7vZ3*Xn~NyM~c8@!sRbONX#Nm90bst~Qb%1Y*(gZmv7 zTv7)e;rM|K(@?#q*(4@~0q}zb7Yoo%_VUiGcNDVc={5QzndIiOO)ZPNEs|Lcy+ZW` zp7}vmZKvFACjv`VDoW6aDRkbLxWNrU@P(Q3Nfamq23?wNL=mZ5)o9G79(y>R3-x*M zw?>rMc%WOhvFQ)w|8OZ^9XnDK_-tm|MR3xh4-$yIuCuP8xCw_>Wsjt`)N;_P!yN2g z+j;LQNXy=G@;OmHIws(M*#?pa=xst$QAwC_ly{#haui3B!_IK|1yFPY3tPDt0IOjt zsR0_}QWz{>GOnJq6UreT6eP74&f;Pp%AoC5WsWX$3d=URrGaV2(r!;&%Jc$QyQNug zVMoS+3Hxl0y0D8p6w8wB!?2_p6xx(-xFS1oy}v3gAAuW3g1Np3oy?(CR`q8D+LMh{ zbBuU;W8A}tTw4#nt8;BZ1Jot=glffiP{t#@Wm2k%%NalL=SX#LIXhdrreVuWwZv{_ z@M2TzlW*X2zrk zROqVg&gI|YG?xBe0MbkwUFbjLD7M*y$Xs*b*VQ|@CahE}4XGyxUL|R-fO9>7ntGk; z+-F5w@k7$$6;w+PNzH2v%PCsv-;$Sdk+nP{@^EL*2Z_*dm|w{YKxBq;oIVVaGYd)yOJdGWn5=Mt#2U)9}U|K4xLvq?HLu+0bA?KT3)P} zk>6E(BU;lCTlSCm9vWuB=a!_U&SHD=TSM&;-T-@~8_nYlM~B$EVw%}3Y`DPUYFab% z1P~XU&jGi@TxvmqIb?4GJh#b^o3K&3ApZ+lR%ptBwVYYT;!vrE7w&(%B2Pu(09235 za@ScAF@^%Kw3o3+D;w}(rvYt1=Cfzo73QvT-5u<5PE==a*ViO(vFf2>Z4N>Q*fJ#aM*u0J#n31Q6YtaE} zbjI880uI(3-5V2b=y}#P9`KXU`;XLN8ri?##}99P)mOP;TH0i#;@;wbwi0rc-GWQP7c^!HZd5uOPsuiziPsa0`gML!8u zXTGc&1|ZJ_D&BOa`*W$1sIuMys%N*x&s-YcvZ}q&Rq9Nn_#5DitG>xqD|lm+4taj> z_*B#w)0cZK9>@E!+K9(19$Oi~@)^dhOp@N+nek~cO>xO@S0uyk(6u7|a}qXuX+RtL zen_j6%Q6D=&v1HInK4wJHVNXROEhL=u8yW#n^-P#w&*xi1If~s2(732ovRJht&|8> z`rWrc^;wnBy?mr$qD>SKSm3-c>5mJGY6XC@JXlUdrA(JAXMczX`C$=(PglxX4T3`& zQq6{G8W$}sT!%9A1=7pH*j`(OoTz2qo<%yKmKe3n1rXCisvNcG7jhK&$sl0e1>n{E+-ES0To&;$$!uI%zZuT$bxy_ zoRq<@^ZAbG*GI(4fiB`}tfz^baTir)EO9urru*Dz^gzLPPVC)D$5+t|_cE|ogUC@{ zD|>XYXOTS(F=Z$>60&puz@r?TF)cd-6UfkOOUcMA2MfE&d+{D#7M(YAb9Mwz^JhJI zGq4DY*Wz-sh9-2kD1&jvHoTaUR)5|INP}>=W_IsfiP2VJ-ONMBH=1T#VUcqU!7`%1 zlTUc{2iSj}iI{D`x&l@=UV;WBMaz*tNNTqlQ+-{=-_CPcZuDbX?>r|-J0@Rxq0wak zY`-SiGfXX@wmmIe@S`#Yc z+7qL{jA|0y2+7+cG;0Qo^+zm-By6gGo=OEE?l4UjO)5D1yA+dB3HoAEQ1W1oSf&jly zcML4dGV!9F_L_7vn*hn29q$qqs(HueLO>Qh>rLI+TwM~>wm)ag{$AzCYvjDIHbgv+ z&u^-P*etY&I7=dwO#hIFYqU$;@%|&jQ#%`9_?RdA--Urh`o}QxXg2E=9 zXSMFW=@iyrE~omzO8}%kHmgL~#-yVb{ZdqM#6xm`2cZd6HHBqlLPT;!fD)Ey5r6dB zkLPE&N;pMQn0F|xzzdnpUEMl?yemT#5irJIy}hzoG>X{%>{1ciE+ht3Z|sWVNOR-k z$ckW67PAcq4oJ4#c6>gP`~%r8&S){SX~75h-l+sbZ;IspxM-Ao3~8nx8$|?_7A^ZT zwklK^L0~&5YZ;&}_j)Jg14rN{!aR?Ol`pV9*d0tB$L+U_ykTv^M`Nr_ZfhIDN`i8c+ME9sI0+nAyyB!dnM9|*T8Zmw_HNc zS}ZGQo!V%ed)#1KPBIS1eIQunys}U|Cp2g0f0D8nnnglR% zsh3j~M6|ABz&|NRaG5KiDqRmww=k$ApIFu_r26_x(ctm=@tZsb1sVj}7x8uy4FrS= zMNIXkW~CZRrh)Twr~Bh8*C@zOx<@x2;pc;_vCn?*G#!E8148vARTp6JMg|$McB}o& zrS?6e(i>d~hf~1yaa^u0@lY#Y6_AJSXZUOsfFCJj^g32w3Cq0*c6+~U3+g3rc_cP` zQNxWwg*h413I!U068j;KEzamn+e8Cq2v<+?{5-Cbw#iW+ko}Pe<3-r(O|GO4^fwP> z)m>qezhj}KNBz2zX7XN66i-?E;@Mj;pd##|@*(fnE#23}-6nA%N{ z^ql_W>w*xkErOu-&=Dl3y!oH>Lgk|WrBI$P+w#Z53E5jq;lmFbHB^;?1-&qcee>s8 z_+Tb@NU@F3bxx#!nay!H4Y3YqBEv7per|NsG;{^?T^`vlo?!N-gQy@i&-)* zghoy6Oh_X8GepcdEVwgvA^LhZuSjFktH>)_Vs$~ zv9t`j1oo(3;rK=#;JZA&;t*H20@uNX&Fr{TnPB|v# zTD3EuNjZHu5S@}jf|}%w6~x9BO4--O*S^YxuJcJ501J7Kh6s1$5(7iYzz|biWX}i@ zQdVH~c5upQovm-|FS{RLW}@aP&vdx{na z6*uJyEPQhBVp@C^2-HxZZQ?ZUYOqFL)D~Vv8|$%kQOpeM*)-35$3Ag`dAB%gp+gIc z$BYu`*l%` zNpbe!Va#E@Nv|o{*@j4ef9vFDlwwbS_U2d#O~H+(?RNCfJ?=v z36W`-*ON~{MKk&Ng>xbY0d4&LA z1|IPQB$W17`R+H<_c&z$&Xi`~?om+fx!i5|;VzYYRQ?j+E!u=2!mw~~ z^Ydb-L7D~SToSQPV3zKmA<=$s(xZc!jpVS(BCv4V=lT~?RalbS7?_-?+t{w8%Hjxc z)mc!g>Znf2~ zb=!*isP>>|XBArXLt+0@QjFDn##Brtv?Ui^LKtJK$Qdtsx$~Mj7v6#nd}Or}_7A{K7VcoB+Qoez{l>@kqyt#M6`s`# zo17Opq&LXzhb%*SJ@e43@=-eq;E@}7p3xZJhdVW1zT6VPg;(FSvisyBPWpABoYXHk zJ}b@&IV6RgNZD7`>$t1Ae$~@j2k;aFRSR&u3fy z$CDjoS%Hily4#=1luwi9Jr2{xI8x}Uvc+8IpN8Bz#Z%QXJ)(SHE%tk z?>C*l%+I$xz}LT&4Br_`e3W{k+lOG9ncfE+Hxic?`bt}JM1~TGxeCF}Vz|{t0we^!XdYO1` zw$2Co?9o18CP3^pDD~{x!j@)uBoD78cM!}tLe6BksD)o&I0*TOnVud|^}+wizYCKL zdih=FO2ipOyo$JieWUAI3}6zmg|SB^nPF;29!@V{k0^M1_L-QXRZ}tRWZb?Eu~DW5 z3IiYx5(gc6yy*=6{+`EC9y@#J!J-Xtz(w!9mfA5qSU5Af|V zK$jEXfjlmhIgoLJb#f_aaCn<8N#l~3nat;vKz=-jc}hXIJ)TfFvvV7rPvNG37qD|D z5=pUCl>UCQL1gaS?Y!*J!HYi~CV^~6ialMl5owEO!-ea;zHO0&KQDTs!HC3lGH2VIm(do}|2=48Wr!|b1 zu{u9ltU2=gtVbEhjq4!FXG@0IZ~w42)vI0ks{%Ky1nT)(IE&)(oQ)0jaG|GGnTPXg zi61_p4!n;rNNzlsby#zP^RL|}7qE0moxt9+fBqEo)+8ap>iPKf@6A9QBE3e*$b@l^ zczSj$SU_MYct;2w>(p&1K-CjJ8o8JAPvPn6L^SLryH*Pa7n!{Mn^k^zeW`tH-_MGpR)IL`RGs2VEpl zr^qSB?}0fvICaX4FUyUNKsBqfL9iNF*^5aYu7Ro}(m9cu$uCCmr^qB)FT_Gqn4oA2 zwD@50*&l(;1n#s_&*R!1;KS1atYbU3J)E6J3aiU|M(U4lnxRhSnh%p5@dYrW|t445Hlm(nuK1`6Xh?v~B_A9W7_d}Lk^+zqoVXu$|eeB0yoS)mGDms{-;*sxG zip$U3I6aG#%~!i5&{?qL9=zhJMVx-%)0cGkET44vuM3O)Hiv=lQ}W7hhl!6r1wX5{ zU*8}m2D!_pqAZ2&pexgZAh3Jn;Q)tDZkWn0qH;m zi4GITp!iyJul*(4ZgEK@ioy|SK>nHXDwj#*_n&X>AFk-Eqqt!|M#-f$C9CrPxzL|1 z8(*@P9p1D5BNXx2mnrX=`sjw4qCHAG?%j*6F;-P(q-M7e2UGKzbCXec7+J*$Ldap` zPpCGIISp7u%@BqRl12R%n!|U`i+(4=nJe3d?NQ1g{--dEuA&HZB$z9WRbmGlJhUaq zM|&cm^!(_6f~2%~+NDHav};(F+7#|wFWPT_u~&9w$BW&0!x^TuM&z|C#{pT57?Vk> zMSI5jvKY>6zgXo}i_HT1wEM|yBc2PY@p+M+Ay%}I0P6`VMK@Z0cn9$6xJ&b6;;=~J zB*a(%g{XBPdFo4%*@;>6btt-|@I_Sc8i#bk?HZ3woW0CkexWaZ8GmU)=>^PF<6n{ae%g?F^|j;SuX-Jyf1g%KL*XxM6@ zp;_an++o!>?RA+lKj$(8{syXS4bQdX`6vUyD3|n7xDkn4BdpHE>ink{dZ24^?$yPSVj^RB zls7oTf=U{cS1z#&cdA$e;5MRMC#stiXZ9s-L9DaDn7EjcWnk+hrQf|;wG<)UVCoEGJ123zAc*>wDV8%Jn{NPOYI-BCzd zaGja2)+8`S@NDx%U``BZu)cZ`o&t)?|u#DE)8Faiq?(|E$y!p)*P9p zUeOU^%jZcFM<(l?96{b8|J*+DjL21*8ch-V)&3 zax($Vm*~8|Zn;XP7zS>WZa33PRg4`8LC5-_G!f2$xRxXrF@M-j)AiAIpzKu|JQRFp zhSemN&Bz|{29@wKK2A$icYmF~P~HGuzFZZl;uUT~9wnARo;|rid%+E+X788eid3I| zk#h)pFsXhLG!^cMehQh3z04)w*|5L4_i|f*#RNkyxR^mRQ+>f@7>3kJopPz&vq#f|NnF$OormKM1@xu@rX{~Kjm|BZrzKuY4C91KP#vIBG^7^1l@o5~zg}-38(r4L3ZhTX?BKp7NG$N+ zV5d9v)6ea0nS{%iUI3PZR5}5c>tA$GL*XdV*W#_oYwT=IWF~`IRdh#OKe6AGjAdSb=22ZoO(OY+)W zS1a!Pu{(^1Z@Xah^M?*3p|0;qtF7IEimfMXYl_r@!;a@LR$gfaHpzCzp(%D6Sls;_us zvu0QlhKH9@kp4wgSe;;x8o)Fg!yTe6HH^1I7GD6r-hYB?=o23DH;o)jrl8sM#(tUw zh$xq68fxUozdTi!MjzJxgwM(^_8UekRU@$~`n=jBI1E>u(WsIO?dZr>qG6}r?ES2! z+{0p52F&RmuYf%DO#jb!v z!TxNXm#oXhP8c{zlL$xYPI&UYC3)k~8Qy*bbKQJ^Yf214-ZUmIW&O0Bi zOY&RGhnCpm$F{{*T-C|A6$Y@(fjG3zN`{A*g{Q3*K}I+2rCMGb$~Wf}%Ybm&O`|V2 zW%^6eTtDarta-(CE3e~9QGY^sKJxMBdj3Fo&*PV;oCc+18n|$ZtR)0d$3^~{{+;IDkrIO1aFspRRl)F49DkN6ZMv5NNz@~!?++>9Q`byCSuy1ARf*o8$>ei2 z46G}K?;VkP-}z6d1;py~2lO(4iyWGB3U^o3we@F?D=(gD?M|UZ#L}bU%zgw(szJ~= zC^smxG%~{2YClDwD_A*Mp^MtU3#)6T_Rmd$DvU}Wr~Dky+P(I>iu#d!B!m%#h9JP~ zm&XvfS*fZOyEOw?rcGm}ciX5aZgY#&#RMM0p2xNY<08XCXB1G zwzjSvwxesZGFi8d-YYp&U{Tc5(l^stjKmTZBZT0z*?3BS5=WddABN!6#?pTmMgAiC zE#^3vrL=%t+}{hq7)5_MC>EhpUe`kAhV19 zs0hxI`YZTY>o_Z6>SE?~xx)+e5fBx15gJkoh8}g{K9L7x%)Z^a2|B*7QV@h4JHC9t zFYbO{62Ksgy;yUAXANGcwfDvB3Eqo?UIM@%vrkA^{Hsv%^CYzgG|0WnREs`6-6yib zfZECH&dDd*nN*+SA_$(mk`^*dK&H%;mho!2*>Rg&<#H0KV#K`95Wm z->r0=fqW1uzeJsWORmd)%wI2fks53FnLgiiK#_bS)F*ONAC1<}X6qNXR9g34#uI%0 z8sYJ{eIqsbyH9?IylK&>OD>>RMva{N;8mKsZ&+eT+ojm;NHYSR36|Zsy=!aR%Ccz1 zj&l1itg=Tl`1t9ir~w0KiY7A00X&rS;6m30DIE&su|e9{6sB@2+nqsnEI(&}$H>on zvFy?K?i+}v*BzpKUQd2H#TSmUv!zmsm2uRz*H_`9?=i&$P{Bw!mt8*K;F?Q)Ve(LEQ& zohXBy2JjH05~~3VkjXFEpT)pXzVfYJyQB)LfBlJeGVP!m8FXnaJ$ zbzR*9W7p_zM&F0vZaCQC-3GZAN)2T{k8C$GDSC}K0}gZ!%6zAEXzHOX?QgaO;I+z`H&<^Dc+<1$6Y&-QLZ3|^e z21>YRLMYbp1r0Ci*M_jK#A|e%D9b0;Y@PW>64;MPu2E;;WyqDpEqlNg{$E8`zs#dGgkO!AM^-T!0YfqK8Y4Ph}VtZM#G)~snNf_@+@$GR=o(> z&|w6%Btf;lTKk??Yq4WCX9-cm==t<~!_@Uq=YRO{SJ1jX^jFx12K3?YLc38);SIBY zG{S=WK8AXKL;qC`{ufn~Hvk!E=D)RFS?d3-82Rru!v7RoU1@9CZHl7$=;{9gr_#@n zjb=gH2_6l^TeI(H55^q>)m^<|xKP3dhdDfHmuR zpK+a;+Qh><33os{7Rf3WO6;naCXyVqMk;L;dgSZX$@VBwND|u5UbyqcBe1J`3pDa-#ukmGHBUni{FS}>> z*kzn4G&Bbb3beVJf8fOuk#LL;X{2T=kkHoc^FDL$s+f>|w5F8`)o`@!<{1RPFRTN= z`{BuEr9EVGAe+6JrHCKCZ|n&JEjv``?I6KLG`;MYsA}+)-Mlnz8T{(tsYLNieol_y zaQfuBap)%n3cszE%4qUSO)RBg%^q-7h(} z@y^MhXx$vOsC8bXK5PI9jGMcL?s$%Z2|LCOBMKz&EdQ&We3{HBeN^aCE_O4=_gFWF zF;p+-A>P;hLWlnL35Ou5&NXQ*^+)fnWG@>|&|CxeE5#%nap3baj0Jug&nJAr#NbQT z=WTU-7!sq8k5;+?^e2lCm-_9qaBs<_9@eY?@xyl>{kYyCI-z>jkc`8ruanWSfn&?4b72s$4;$rN3`D%dqnY9r5fQk)T~OnV)(MkWX@T)J#`>{e#S*{?f!Uq_j9@m687NTl%ASs z{hWz^er1@h#NE|&!%LLh6r&@oA?Y72Sliib6HI;>{ABZaNl=@dk&I}9-fOd1sfwTu zCtFT64Xho?wbjzOf;kmh6ki=1$p@GoRRC;Ml{qF3nP-Qa0PuYTlO15`^9r8?`l$^d zZigJ0Rqrrii4#@JQ`N1Qhue3CPa=}#nn1MNY|+}TG^nXj0LERJGLiUN8*)D3ikYtP z9Ds5O0dRSq;;cg+2&>KU_xwAp;thXZ8q5H%KaH6|KR2iE!8TBtX%5XKU2t8>2!F7t zVWEw0iCH&QLQkVV-f+KM7=5?80U_&CR|d$H)0bqTj$mrfS$;#0EV*ZmI%u{X2Go(9 z^7k<0A3XoWv0*_d3V<9!jBJak)w-9L#IEH)%Qy?G05=ZK zE;9`32bv?x4s+RebV`?vdVrq!{j=h}*oK$!Xl{rp0fO(JE6kTHkhMfI$sN*694;(o zQO60wYy(ORXn<4}U$*^nVg9SsF9^x)NaIs zBqb*^tQ~_~Z`iMb&VsT1yUIX3ATDdrneM$v>ruJ~7=S=CcyN83I?$mwMba^uz#nFV zNf&QfuV5G+OGwP+!j(M;`O4skZrM@o0_SM&Psf&wREfxlJVaTH=G-Y%lv-`G$QB`# zl7VcLnz28P+j|kL_gAOvhY)^NJM3ckipsL?Rbp2$v2!?h*>5yAZ7*c~@d3kH`nU7# zhsut_sScy*usbv#Tl^&)oa`$hN;5dQf_hMlup(u>CK?ynj*qjwwMsj5@K*HO0wWxa zSsuq_JRcrB75`kx5R&ogdN|slfxnwIBz17KvTa89tjX%DYLKi{9>nB;npMY_m%u1+ zZc-E;}HA#w?y3kd)L#mg7QaCfsCF}dmPm_bY z?(T0t%ul13QeHmd}-#Lttb9Iky3w$ zs(^Vt%2A0Vxkh6=%2i+dlFE8xl(mo)1~5Cv;aX}1g?Y^<#reDu*)&41$rbK&Nx`=W1(CpkaNyH;-@@r(&Zv>f z1&3u~0LY;^8xB%_MfXtYFOqo*2<_$c;7Bn8W;e*&YD~X9S3TozH&OtjkOb=XTK&6) z+og)+>T$;jcK1<3GR!kqE4YF(Bd#CuSXxM{Ku`d?0^#m1EA~+;tED-rW53nrAq?7U zjLc%yHI2qeLD=0nLPsMZfuhkh(|9~!pD`uR11vz^zqJ|#@n~K@b31O_kPnSXMFP;| z=ZE`ht!J(T`vE4~G3hT#=ZShS+@sO5Ab6l5$ozKxXlpgKSuJ2s?RSV zVCvCrAp#8LSbl3GVS7El=P4K%K?(?opk-o=xnC&|XeAtYi41kVemSou*0#tJr1iSB7jIJ@3w`x;3oYC#Enl~ybv+0xxaK(5&sq4 z;b>$iglsDbh=6U|(JPy39o+Eq%1K#QzwS(jmAzpJ7o9^p)@oL|wPl#5GX&KilwCn# z_5v#WpF_;Nu zUpUrLsJ3K253Ujj*`u3%*58v*91kY-;UfWvM2lMtQ0Gmt<%(4EC0(!DOy^KdDU z)OI~+a|V^Cbk^^ZX;0Uu@xc`*Xgjnu9xl|0ZD1{#>CBI0(=};=< zP)!uW2@*71c!E*Y1H;z{1Te?S{jtlqWl(?3+D}ly^I(hawCR{lzWS4+novC>XDRvV zePO>`7#Lr3f&a`GmnpM+<2_a$V9ts{HT$+Xzq6xM=+PXw-p3wvjxmMB+Qd4a94D#b zFvE(|3oe(Uv{n8kho{ZE$8`e#v{15BbxSk9wg?#rugc<+jb*D!6^g$N01Q_2DnJ^m zQe7^1pQF;81NQh?7bk%->9x$|Lkc@8f}Y@8E_6o|OgUO)f4Gte%OhV|>8Yo+_2 zulB!IN;#PuIGPwMIXnIz%kTd&t~x8r*lp6obi=RtA~PSsT1s@tF2w{Q39(|u3(cXLzL zgp;pB6SyE?#Odz0Y`4T;pA;mZJrNncPfbPTMarRQ zKNX~2EjzRr(k*P{6xkMNx!jv-I-8f+OR>FIqTSg!bZQ;6eS9L&iHoA|G8;=j6y|Cei5P$Q}`eFOYtO`yswYFzjcE-jKFoN!jst#h9xXnowu^-G8jqk zr&P8dOizQOw#Gw+8Vc(e8gq44kb{=Ib&LH9!`e(1()Om+yf>a~|9*dEOY0j$E4;T1 zv+gmwj$&UbRcb)S^EGsxK60C;guyeZFv=)}qG&yEq1S+ssQgEBeY-c~=tLaBJr9Sm zqfVJy>4iS1ba3i~OLV*Pul$w@dvbrzQ=;Ot`pywn2n||~+jVa?2L!Dgf2>N)?9G;$ zp92c&hUGT}7SnNBTC2gv-5#A#%ACC{p{W3Rd8dhHJ-uUbYp$Z9>w;f)Sb8bjzGhAg zG%K{ZO!?~AHAD{QC!o!`w&T{CKY;OV4cS}^WA~J(qW0eFesnm0xFuRP+CP#XP0?-e zecWc5bD@o>6}-005r|YOt!5+Sp@d+NRZLpGE~4${&UCk50RH;?s(vkHN}pYcay2)P zrs8O;D{MHvv!GRlyLcg9e@xUJ^>9@Tvbps`%1}dmWUPL_=FQO^%sFnGr);-%lbtbS zn%?gb6!%c!1Lf9L+r@yS^{#_!`tfz~Pj&*f7qYAizdxgRPkFZ<^=+0aL~til`1=ny z6mzXVRvP*wh?me&Yf-4?n|s=)2R5}U#zrGN2jg&ZGf^DeJ4N2_z$VYj8B_b2CB88u z?BTHJ5%-g4VsB}!cS6>PvgIrqo-m0IjWK_$$V3aK+Vi(dS@Vj}#Tv$PMxVr6&u`T# zr2L@~;M`cLJe<9>LL-*1X}2lc*s2!2NpL%!>)Gx4sRuB+Nr%Nd=6Tca zMKz{D*IH(l%bhaBDdiBc;0>yZfzhveZO53|P=_A>ZTh)RR2cVdXz=rJgQ?jc``+$( z)~g_i!>4KDH!^qkfI{duB~xO(Jh8NA@A|{Z?&ZE;OnvM)J{bY-^>`2Tce2>_Ja`f| zB^|=eV|7dncL6?LGZ|iTjWp(JZ*wFNKT`TS`u2%3ZF$WcrKV z25Vm!Yu2B$Wv|To%sYw&OyWwfiHUvp)3>e~m#)Iu1&lN+Zyv%VX1{?tpp>`rHaWDa zXS_Iz%OY@d?8lHUe6(|(b#`*N zt9(qJB5=GrT2o#$2w4fE|5)3HiPkf7Q2G+2T%5 zq|mH;@6AKxE{l~oK5W&}wFm1|2V0Uz@iN2V#6>}g>P<-*!*|VmS}tPQ8Bx9&?Q@;0 z{N;36vbfh!mQSzTXYsty?B9OgKe~!Z|MBzw)tUWQXZBy6*?)Cr|DV;F)uBN6w4(t4 zbNE;JkNju;qn5J#<40uT{3<;bR>h5hFWUAsLUnMOpOGE(m0gP`);E2Y^@faBhZ&c| z{zlmy%Yh=<`)Xkc7@TI`zK~EBGIeChc2fBFv44VtC;34%W^E2%0y6hRk-J#;c zB7jUxLmvzL!ch;&1I%UD-bJ30WD^KDW>TfbY@UYEHn#ES>Gv{X6dih7dDl%Nh`!oW z_j!Jw4n~P@O$w2=j8PVNzU^5W+Fh!ZYB?cgeDBBTEPr9@t}El-^`*St1`O9imp+~R zN%NHg7r?B672VeZ^qFZ@h`Zw*k31sAYcvTy!rZ*iRMzED;mOvY(U1MRzJ8%QPAw4P z&LC(DPAt{zf_S<#KkskjSYgW7&XO@O4DbAP_{zlEJL?^u$RoSyc)OtX>j7StOD$h8 zk1UOk%QU8*Dznr{^66-8Zp~dEzOKl^HM?x1H;Qndkoja7+IcWmGm#PtDigeiAeq#` zLz|z_h#Ve>&PeRx`f)bpJC$TXqotkkBXmZL}W@ zfXJU)1o7Uar19P&$YloL7K)}VQ`{Dxw2^x~>_J>9(Yi4&1&8hfYB!I0U;fJaSw<=V zu+9!g!6Ex%-UUmPyW=1i+Rts@$GyHKacKH&=(Ny~irKKf56W=dZv<>_tQ_9Z<4 zEqM%`F3hIObg@Ji0nq#H2KM|?!rN&UT6oY$30lI+08>qiM5Ykk{VK4>WV5}Bt^zRk z8y`J_&VI*vjm090}6 zWeW@C(H_na$Yes&5aVP5%kkr#g3?j*!4VBS%#WJx#I})m&r#56bB+z6(S*UM(|>V&Xk~|1?#>D*Lu2jzFOQZDpRu zP~?C>UH!Jm!wRF1l@58gn3klQ0x>92$YWvx@ovj$tI)s zJ->4!M~yvVdo@T~VBXKpp9-*wp_B}G`AOfFucidKuXkICxQ8CNZ%xK#uS#b4Mfl9j z&C(Z1;9Go#3(-|pqVAlQ=%2i^$cgRjHFG;sqQ5gnXB;Yje<0oFMum@xfSAWX$aM-? zH8f&GLw+6{C*LRLxb8k*GsZW-s>^50ig>;zo_8Y-FVKG=*oo6y{}$WQm?Umlu!t8P z$1>!ZDw_Q|sXlY{?!#Xl2ng|GP@TS%1@cQNJEo!rf!XTMUoV=5G1%r6N(L7Er_4l` zTo(EduXo)5Lm71S?to9w_9IXhYkX_z+z$aVbOFGcW%dKFy?#b^Zp-YLEtQuYSR#ZN zF4~ad;r-jm=bhEk!N-_Qfcu)4Iq>|Ev0K>Zz1omBswrJZs>D&o<6>sOg}o44$In zyP;h|TG^>7)38JkmY4EKj{V8f0~bdw+);+5GL|B;?$DDd+jHEQWJW8c31Yr^>t3!{^r?2JtA$~JeIpyJn`{S`ItJQ!AYXS= zl+|f8wn@XSeHXAlVn{i~p?y8wXb%!UTxy=bO}xmQy50*2fqXK-%TuEdZlyU=Qv2|T zt4FGCQJPn8w^mP*tw=S1&2KPt>oq6&=+eV(5B%)qpOCrf7(DoE&@V6dV$n*9JQA;_ zWg&O$G)za8&+U17c0r%$X6Ms$hEg^QohSJBfhgS(#T;X!tC6GlKG31^K{`BRv*pxA zT}Eh;O~+5GL)h$qXEbS_j-|2`=%|ZC@pI-Wwg_y|HcQZzqG>3>woq)(X?-*}^YAGc zO4Z_(3B~e4omuV3b)Vn8=dTRTDANLqyH}tQBKA+R)9!KS&ztyHj>7Y@(7e!Q#!bGb z8b*%Ywh0*Q-Sbm9kd~q))2QpY@6AdJZ7#+*0?g2w>xlPAd9nZ8AoZzf;AZTR zf^-O_-Jopt2GcuJ#4r40htf@}5-&39n$n7R)F*=EgJuUdH<-m|jwss##(rP#sa8bq zG>jPlCpE9Sec<}7!`*jO8y3mmgHb%7=mmbP5+jLtB`qT5x;)X_YDYP=RQqsuR}eJ$ z?H-U~D%ECZT4i_8xNdEAeK+@bynE7>$DSi=UVlMU21*yWeNbzat%_2?q0PninnrS| zX3cJikUeU$h;hljUw^xwW6!GI;8bi$EO)!c&xjrB#oF0B6jN~YkZ7uZPZt44@0N5b zvy3dhk=mIC_VNAoq-jJVPygMPrf%<)EY#qgH8)uzzLhoe(BPu8NVvY-6!~>QCedDZ zgSq@%ezosUJQVyQI>JETC$q=za{$e@_~0HN=6phehiuAxj#WZZr`_I) zZEH{L+>ju2#@c?N3+8Kf({s%FR%j@Dr#&S*MHQ`E!6bB*zsxqv0F{$~%ibo|eFyT=L;Kckk#WwOFK9^4jU$wUpLNnuddGMQg<; zor8GFDvm1`GeGOYQ)%FJSll&!FpY)00jl@4BggC(n|I9x(7e-}#a~Gy0yad#ST9b< znvV!ePlv%wp9~jD0xRiGInB^N$z;(J7ge!n8kM&xsHN!b%Z#;nwYibu0}#MmBM6O7 zHkW2Xd}_$g?O=^}1_eor@yizS&83hh9iKN1*6dW{xr>X6p1$Kw$~Hge&|4(jP-y2g!%mXIhN zbFMnk01OjtICE#GaBn?Pz2o#g*9{5W@qH>8j4;d^*yFC`$Q@ZVgCR`T)|wyM;{DEF zVrlJ{iF`NAUuPcTj}p&4?S85^;XU|NFUq&jK}+$OKuOPYvr(D%;1yf zMnavj*=M(I5#%n{=>#t) z=cdH45tdT8BHGq!=@JX5Vz_q4j|FyH zDv!#7lUz`nyyPi%QGfLb5%jYREaL37#P3Lxy%U7y391`TPSAiRJwbJEs2hPvI$KN>t%$fi1ub0Q!M-xm*AptGJKF%b9m1k^OlcL zg$>SBOB~&a%M+w%r^#2K5$B+_y;>BW4&e;bWVLD$R|>rOc7%SKil3GP;Y;E61b8Ij z2s-yFZ9$Njcy(S!oeq6*$)cqL$xDwmEupArdHRo!ZtTd<=6TiE>?$<;In4}4=35!F<<~fqPU*#~ z+B*d+Z{S-o1ESU02&=o1QI+0=D~%P5UCO}bu4Y@}R8Q^jro6s!ORwf%qFLeyoR^@^ z1h|(-n1g-OtT`iny+87H>y%M6;!*WX?rpC1?nkh#C$FY&jJa+lu?6?c8#<6R3CC?z zwI#qOot+GG-4}=KdOa34i#F>L)rE4X;+^ z@>_AKUSZu4HEE76x99Y~A*yQVYxmYU9bJ%n(q_Yp4>InH<8Heyxiw&E92sEhAdUAM z2J0t@<#P72*DO>mtvDqV$I#eWd153tPp@>aTlqdy1Cd%$!$_^Dza8wmXVyEh+d2(t zy?d2fdvbuVu^V{bgLtlMXjmyCJ#52nYXMC~_BUl}<<01%YGia)Y&p}dcUHc{=N64u z5tBIoRBx0`P-y=WPgXe1F#T4|fwgH0w3smmb8b;m$O#s&T3kiiZm~tE0?2Hakoc7$ zCf+rsQb;YM1>Y$ah#n27qm^eW7i^j8B-xU6aXX4L2Kprp~aq&sO@cQDO?7N|;V4 z6`BtlG83MzLFiS2e0I^2G;gj6gD2UiIl)s_Ugo(l+)X@JoCrH-=BM(|W6yCP#JVz6 zL|C`F^7SptWpKNhV(|?biCQ76V2O_d!F%)c;-PoeLM&|RHOY#pW{T51!Rt3q`ak$A zvrZX&9H6Q4tTP{*lFN`ReqxsG>gpj@v@J4OqOoL1T^^sw#jut3SwUiB-mrPWfUGZb zDUMBXjO62^=ua!)uX+5w&Ekx^=1m#Nc$w*t(tK-ptM(Qnl-6Tj1h2^7kr6@q`u<73 zB>WX<(Nndu5UbAYreYJ`-N4PVI&%=vnjAd1Aj4n|liFrg3%B;ubj%?w-a^m>l=Ejj zxFKS^TI*GWnp(!XwaL5{;{#f(?ZQG#F39qZc86{685>ZwNa9G;q*G2*?D+)+RVB%> ziPaCnu!XRHpl0G#e5goYm_daoOm5t<_Y^7k{^oS0ZdX`umzrlnv)9A9!vlLsPt|YG z)8u>2>f>G($kwh&TYlQa92m2HLXuZ^s~z$Ps@;~C3SzdpA5p+wdDh^j2Z5MsBQ3=w>v z4-zXp9*%;m00h$Vh$7f=mv`RK7;&OhSktF#8y-k)*BL`FzpbvR3_UOMBVnwwA~|;5 ziu&ZKv`hqOe(Z$^P0U=pHbuFUlIk=!e~L{7m?_N>%a8#sR*kiwBgI>Vy{2~_h2&&} z0Jq%y7FU6LPW+}x!G&Fg_PW=M6LsYHHx1m2OLq+BIMj*m$GC8_e$w2VDPLY28D(+% z*zH}ui+V;Bcbk~qYt+*g{J7L_ND!jYdk=#jH{!~kp*6MJJdCwm7F z_j3n_-yu$nZ_!b1WdV>^{QrHV#Yp`Q^$LWe9WdZe&%736EYIih@KpjS!-_G9&0SBs3lq1*i9l$S)b)YVt}5!}pJf#~YKbP3)~OydPvD zZR&-u7Q&q6-Y1y(gT0yJns7rnGb#mg%Z)_!x3&IbgP4Hqz-BBZE| z(Rjo=LA@p}EV824Zkazg=v|U4cKul3Yq9{kd z0j}eFbs~F@C%l%qhvuc2St=rKqiZxwC)tzVkCmK8%X z<#tN`p_#KehL|gXLn&Sio5M+;0$1h`x=Y;8`7>%Vrg}GP(ilAWG&Y@v53Zhxa`@rB z{96?5F0!*^Lsn9E8*T?=gr2jhlZL6Y^Y2i-%jbMtMwWJK8r=`SN)n&+hd#bNEJxgH zKxQbJ`dIxMDeyK-0BEcu?z141k|Avck5S1eSs zB<|Xv6J`hM1XC=w-8N2G@F)*xo`2hrHE7ED3(FB2=Jd|$i#c;>>|>@<1RY7qcg;&jVjg-eaogu&sin9^EF z+|?0Ba?>`CDQw-sI3UWEXxx?QX-3m8?HGEw;bW|B2>t%mG+X3;wyGy>IBSzfzUg;6 zT3lDre2nT5Y2nKCk{?T-^%rM5z6i&>eJc{L`m(Q=&v4jN zU(QnnxkNdiy`~=iBs1*oc&dmO7sHh$F5=2qs(>tUC#1GJ$$2|%Z0}_Huc7|aIfchG zDt_gmYKHrt%Cy%he;0;Hk2S`n)8ePynv~wO#RFQ(znwS%f3F@S5Oc?e*D=7obCMVy z(|P;5eE!DDq!7x~S4*M}f4E(%(;^(2X8!b3^*6P*%tCjIi;8jWZrR@{ur+S*#Nona zf!z{h9R=IpYKeqP@g|}N6V5dLwEmKy$rUvN%mRep`+dn7)!xig8LIx7XPIZ5U$PuW~^BMxwDe zzctUt>W+&W2jTmbbq)SS?VoYFI7W^I6aul3hWfz98i+cWSTiB!j>?u$s%=}Gic`wG zy|En+x&I#cRz-s}J1)WUUWSxM^0d_Kv0mH1P+F6?wOXAx0m zLf?XahosY-9~gMhdC_9*|r-bY<+3CfCl{@Ue%3 zDM6^V;t#x7&@8SfVjDS|6fk{@I&tN1LWm$$jhkD zB?ACZvCi!MKWW|Uove-Q?X7>``$~>^wap7nFB8rONna$aGW|t3QwF?D zI3IpMWk{)utm-!qK z0C*sJ74!U(H_3$n!1(uIzcv_gxnOl?9gpR~p>&9nVF8>*vdWD|@bsGZcT`0n&g%koM`)e8uHg zaCvn2Cw*qs+3o*3W5vtR%fp{PP|}+J4)km=bQyZl!~cT>00L{zJ?H=Q_tg|JkY)=2 QU_t&ek?spd{qM8?0*~k1G5`Po literal 0 HcmV?d00001 diff --git a/Marlin/Marlin/Sanguino/boards.txt b/Marlin/Marlin/Sanguino/boards.txt new file mode 100644 index 0000000000..4f71b8ae5a --- /dev/null +++ b/Marlin/Marlin/Sanguino/boards.txt @@ -0,0 +1,16 @@ +############################################################## + +sanguino.name=Sanguino +sanguino.upload.protocol=stk500 +sanguino.upload.maximum_size=63488 +sanguino.upload.speed=38400 +sanguino.bootloader.low_fuses=0xFF +sanguino.bootloader.high_fuses=0xDC +sanguino.bootloader.extended_fuses=0xFD +sanguino.bootloader.path=atmega644p +sanguino.bootloader.file=ATmegaBOOT_644P.hex +sanguino.bootloader.unlock_bits=0x3F +sanguino.bootloader.lock_bits=0x0F +sanguino.build.mcu=atmega644p +sanguino.build.f_cpu=16000000L +sanguino.build.core=arduino diff --git a/Marlin/Marlin/Sanguino/bootloaders/atmega644p/ATmegaBOOT.c b/Marlin/Marlin/Sanguino/bootloaders/atmega644p/ATmegaBOOT.c new file mode 100644 index 0000000000..1711014459 --- /dev/null +++ b/Marlin/Marlin/Sanguino/bootloaders/atmega644p/ATmegaBOOT.c @@ -0,0 +1,713 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel megaAVR Controllers */ +/* */ +/* tested with ATmega644 and ATmega644P */ +/* should work with other mega's, see code for details */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* 20090131: Added 324P support from Alex Leone */ +/* Marius Kintel */ +/* 20080915: applied ADABoot mods for Sanguino 644P */ +/* Brian Riley */ +/* 20080711: hacked for Sanguino by Zach Smith */ +/* and Justin Day */ +/* 20070626: hacked for Arduino Diecimila (which auto- */ +/* resets when a USB connection is made to it) */ +/* by D. Mellis */ +/* 20060802: hacked for Arduino by D. Cuartielles */ +/* based on a previous hack by D. Mellis */ +/* and D. Cuartielles */ +/* */ +/* Monitor and debug functions were added to the original */ +/* code by Dr. Erik Lins, chip45.com. (See below) */ +/* */ +/* Thanks to Karl Pitrich for fixing a bootloader pin */ +/* problem and more informative LED blinking! */ +/* */ +/* For the latest version see: */ +/* http://www.chip45.com/ */ +/* */ +/* ------------------------------------------------------ */ +/* */ +/* based on stk500boot.c */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* All rights reserved. */ +/* see avr1.org for original file and information */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ +/* m8515,m8535. ATmega161 has a very small boot block so */ +/* isn't supported. */ +/* */ +/* Tested with m168 */ +/**********************************************************/ + +/* $Id$ */ + + +/* some includes */ +#include +#include +#include +#include +#include +#include + +#ifdef ADABOOT + #define NUM_LED_FLASHES 3 + #define ADABOOT_VER 1 +#endif + + +/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */ +#define MAX_ERROR_COUNT 5 + +/* set the UART baud rate */ +/* 20080711: hack by Zach Hoeken */ +#define BAUD_RATE 38400 + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +/* never allow AVR Studio to do an update !!!! */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x10 + +/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ +/* if monitor functions are included, LED goes on after monitor was entered */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB0 + +/* define various device id's */ +/* manufacturer byte is always the same */ +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( +#if defined(__AVR_ATmega644P__) +#define SIG2 0x96 +#define SIG3 0x0A +#elif defined(__AVR_ATmega644__) +#define SIG2 0x96 +#define SIG3 0x09 +#elif defined(__AVR_ATmega324P__) +#define SIG2 0x95 +#define SIG3 0x08 +#endif +#define PAGE_SIZE 0x080U //128 words +#define PAGE_SIZE_BYTES 0x100U //256 bytes + +/* function prototypes */ +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); +char gethex(void); +void puthex(char); +void flash_led(uint8_t); + +/* some variables */ +union address_union +{ + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union +{ + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct +{ + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; + +uint8_t error_count = 0; +uint8_t sreg; + +void (*app_start)(void) = 0x0000; + +/* main program starts here */ +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + uint16_t i; + + asm volatile("nop\n\t"); + +#ifdef ADABOOT // BBR/LF 10/8/2007 & 9/13/2008 + ch = MCUSR; + MCUSR = 0; + + WDTCSR |= _BV(WDCE) | _BV(WDE); + WDTCSR = 0; + + // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. + if (! (ch & _BV(EXTRF))) // if its a not an external reset... + app_start(); // skip bootloader +#endif + + + //initialize our serial port. + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0B = (1< 0x85) + getch(); + nothing_response(); + } + + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') + { + ch2 = getch(); + if(ch2 == 0x80) + byte_response(HW_VER); // Hardware version + else if(ch2==0x81) + byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) + byte_response(SW_MINOR); // Software minor version + else if(ch2==0x98) + byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else + byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') + { + getNch(20); + nothing_response(); + } + + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') + { + getNch(5); + nothing_response(); + } + + + /* Enter programming mode */ + else if(ch=='P') + { + nothing_response(); + } + + + /* Leave programming mode */ + else if(ch=='Q') + { + nothing_response(); +#ifdef ADABOOT + // autoreset via watchdog (sneaky!) BBR/LF 9/13/2008 + WDTCSR = _BV(WDE); + while (1); // 16 ms +#endif + } + + + /* Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='R') + { + nothing_response(); + } + + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') + { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') + { + getNch(4); + byte_response(0x00); + } + + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') + { + length.byte[1] = getch(); + length.byte[0] = getch(); + + flags.eeprom = 0; + if (getch() == 'E') + flags.eeprom = 1; + + for (i=0; i byte location + address.word = address.word << 1; + + //Even up an odd number of bytes + if ((length.byte[0] & 0x01)) + length.word++; + + // HACKME: EEPE used to be EEWE + //Wait for previous EEPROM writes to complete + //while(bit_is_set(EECR,EEPE)); + while(EECR & (1< byte location + } + + // Command terminator + if (getch() == ' ') + { + putch(0x14); + for (w=0; w= 'a') + ah = ah - 'a' + 0x0a; + else if(ah >= '0') + ah -= '0'; + if(al >= 'a') + al = al - 'a' + 0x0a; + else if(al >= '0') + al -= '0'; + + return (ah << 4) + al; +} + + +void puthex(char ch) +{ + char ah,al; + + ah = (ch & 0xf0) >> 4; + if(ah >= 0x0a) + ah = ah - 0x0a + 'a'; + else + ah += '0'; + + al = (ch & 0x0f); + if(al >= 0x0a) + al = al - 0x0a + 'a'; + else + al += '0'; + + putch(ah); + putch(al); +} + + +void putch(char ch) +{ + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +} + + + + +char getch(void) +{ + uint32_t count = 0; + +#ifdef ADABOOT + LED_PORT &= ~_BV(LED); // toggle LED to show activity - BBR/LF 10/3/2007 & 9/13/2008 +#endif + + while(!(UCSR0A & _BV(RXC0))) + { + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + +#ifdef ADABOOT + LED_PORT |= _BV(LED); // toggle LED to show activity - BBR/LF 10/3/2007 & 9/13/2008 +#endif + + return UDR0; +} + + +void getNch(uint8_t count) +{ + uint8_t i; + for(i=0;i $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + \ No newline at end of file diff --git a/Marlin/Marlin/Sanguino/bootloaders/atmega644p/README.txt b/Marlin/Marlin/Sanguino/bootloaders/atmega644p/README.txt new file mode 100644 index 0000000000..8286007851 --- /dev/null +++ b/Marlin/Marlin/Sanguino/bootloaders/atmega644p/README.txt @@ -0,0 +1,3 @@ +Note: This bootloader support ATmega644, ATmega644P and ATmega324P. +To build, set PROGRAM and MCU_TARGET in the Makefile according to your target device. + diff --git a/Marlin/Marlin/Sanguino/cores/arduino/Copy of wiring.h b/Marlin/Marlin/Sanguino/cores/arduino/Copy of wiring.h new file mode 100644 index 0000000000..e29959b865 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/Copy of wiring.h @@ -0,0 +1,135 @@ +/* + wiring.h - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#ifndef Wiring_h +#define Wiring_h + +#include +#include +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 + +#define true 0x1 +#define false 0x0 + +#define PI 3.1415926535897932384626433832795 +#define HALF_PI 1.5707963267948966192313216916398 +#define TWO_PI 6.283185307179586476925286766559 +#define DEG_TO_RAD 0.017453292519943295769236907684886 +#define RAD_TO_DEG 57.295779513082320876798154814105 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define INTERNAL1V1 2 +#define INTERNAL2V56 3 +#else +#define INTERNAL 3 +#endif +#define DEFAULT 1 +#define EXTERNAL 0 + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (F_CPU / 1000L) ) +#define microsecondsToClockCycles(a) ( ((a) * (F_CPU / 1000L)) / 1000L ) + +#define lowByte(w) ((uint8_t) ((w) & 0xff)) +#define highByte(w) ((uint8_t) ((w) >> 8)) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + + +typedef unsigned int word; + +#define bit(b) (1UL << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/Marlin/Sanguino/cores/arduino/HardwareSerial.cpp b/Marlin/Marlin/Sanguino/cores/arduino/HardwareSerial.cpp new file mode 100644 index 0000000000..d4931b4a41 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/HardwareSerial.cpp @@ -0,0 +1,187 @@ +/* + HardwareSerial.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul +*/ + +#include +#include +#include +#include +#include "wiring.h" +#include "wiring_private.h" + +// this next line disables the entire HardwareSerial.cpp, +// this is so I can support Attiny series and any other chip without a uart +#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H) + +#include "HardwareSerial.h" + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which rx_buffer_head is the index of the +// location to which to write the next incoming character and rx_buffer_tail +// is the index of the location from which to read. +#define RX_BUFFER_SIZE 128 + +struct ring_buffer +{ + unsigned char buffer[RX_BUFFER_SIZE]; + int head; + int tail; +}; + +ring_buffer rx_buffer = { { 0 }, 0, 0 }; + +inline void store_char(unsigned char c, ring_buffer *rx_buffer) +{ + int i = (unsigned int)(rx_buffer->head + 1) & (RX_BUFFER_SIZE -1); + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != rx_buffer->tail) { + rx_buffer->buffer[rx_buffer->head] = c; + rx_buffer->head = i; + } +} + +// fixed by Mark Sproul this is on the 644/644p +//SIGNAL(SIG_USART_RECV) +SIGNAL(USART0_RX_vect) +{ + unsigned char c = UDR0; + store_char(c, &rx_buffer); +} + + +// Constructors //////////////////////////////////////////////////////////////// + +HardwareSerial::HardwareSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x) +{ + _rx_buffer = rx_buffer; + _ubrrh = ubrrh; + _ubrrl = ubrrl; + _ucsra = ucsra; + _ucsrb = ucsrb; + _udr = udr; + _rxen = rxen; + _txen = txen; + _rxcie = rxcie; + _udre = udre; + _u2x = u2x; +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void HardwareSerial::begin(long baud) +{ + uint16_t baud_setting; + bool use_u2x = true; + +#if F_CPU == 16000000UL + // hardcoded exception for compatibility with the bootloader shipped + // with the Duemilanove and previous boards and the firmware on the 8U2 + // on the Uno and Mega 2560. + if (baud == 57600) { + use_u2x = false; + } +#endif + + if (use_u2x) { + *_ucsra = 1 << _u2x; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + *_ucsra = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + *_ubrrh = baud_setting >> 8; + *_ubrrl = baud_setting; + + sbi(*_ucsrb, _rxen); + sbi(*_ucsrb, _txen); + sbi(*_ucsrb, _rxcie); +} + +void HardwareSerial::end() +{ + cbi(*_ucsrb, _rxen); + cbi(*_ucsrb, _txen); + cbi(*_ucsrb, _rxcie); +} + +int HardwareSerial::available(void) +{ + return (unsigned int)(RX_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) & (RX_BUFFER_SIZE-1); +} + +int HardwareSerial::peek(void) +{ + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + return _rx_buffer->buffer[_rx_buffer->tail]; + } +} + +int HardwareSerial::read(void) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + unsigned char c = _rx_buffer->buffer[_rx_buffer->tail]; + _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) & (RX_BUFFER_SIZE-1); + return c; + } +} + +void HardwareSerial::flush() +{ + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // don't reverse this or there may be problems if the RX interrupt + // occurs after reading the value of rx_buffer_head but before writing + // the value to rx_buffer_tail; the previous value of rx_buffer_head + // may be written to rx_buffer_tail, making it appear as if the buffer + // were full, not empty. + _rx_buffer->head = _rx_buffer->tail; +} + +void HardwareSerial::write(uint8_t c) +{ + while (!((*_ucsra) & (1 << _udre))) + ; + + *_udr = c; +} + +// Preinstantiate Objects ////////////////////////////////////////////////////// +HardwareSerial Serial(&rx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UDR0, RXEN0, TXEN0, RXCIE0, UDRE0, U2X0); + +#endif // whole file + diff --git a/Marlin/Marlin/Sanguino/cores/arduino/HardwareSerial.h b/Marlin/Marlin/Sanguino/cores/arduino/HardwareSerial.h new file mode 100644 index 0000000000..3efa775f84 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/HardwareSerial.h @@ -0,0 +1,76 @@ +/* + HardwareSerial.h - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 28 September 2010 by Mark Sproul +*/ + +#ifndef HardwareSerial_h +#define HardwareSerial_h + +#include + +#include "Stream.h" + +struct ring_buffer; + +class HardwareSerial : public Stream +{ + private: + ring_buffer *_rx_buffer; + volatile uint8_t *_ubrrh; + volatile uint8_t *_ubrrl; + volatile uint8_t *_ucsra; + volatile uint8_t *_ucsrb; + volatile uint8_t *_udr; + uint8_t _rxen; + uint8_t _txen; + uint8_t _rxcie; + uint8_t _udre; + uint8_t _u2x; + public: + HardwareSerial(ring_buffer *rx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udre, uint8_t u2x); + void begin(long); + void end(); + virtual int available(void); + virtual int peek(void); + virtual int read(void); + virtual void flush(void); + virtual void write(uint8_t); + using Print::write; // pull in write(str) and write(buf, size) from Print +}; + +#if defined(UBRRH) || defined(UBRR0H) + extern HardwareSerial Serial; +#elif defined(USBCON) + #include "usb_api.h" +#endif +#if defined(UBRR1H) + extern HardwareSerial Serial1; +#endif +#if defined(UBRR2H) + extern HardwareSerial Serial2; +#endif +#if defined(UBRR3H) + extern HardwareSerial Serial3; +#endif + +#endif diff --git a/Marlin/Marlin/Sanguino/cores/arduino/Print.cpp b/Marlin/Marlin/Sanguino/cores/arduino/Print.cpp new file mode 100644 index 0000000000..4ee556dd82 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/Print.cpp @@ -0,0 +1,220 @@ +/* + Print.cpp - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + */ + +#include +#include +#include +#include +#include "wiring.h" + +#include "Print.h" + +// Public Methods ////////////////////////////////////////////////////////////// + +/* default implementation: may be overridden */ +void Print::write(const char *str) +{ + while (*str) + write(*str++); +} + +/* default implementation: may be overridden */ +void Print::write(const uint8_t *buffer, size_t size) +{ + while (size--) + write(*buffer++); +} + +void Print::print(const String &s) +{ + for (int i = 0; i < s.length(); i++) { + write(s[i]); + } +} + +void Print::print(const char str[]) +{ + write(str); +} + +void Print::print(char c, int base) +{ + print((long) c, base); +} + +void Print::print(unsigned char b, int base) +{ + print((unsigned long) b, base); +} + +void Print::print(int n, int base) +{ + print((long) n, base); +} + +void Print::print(unsigned int n, int base) +{ + print((unsigned long) n, base); +} + +void Print::print(long n, int base) +{ + if (base == 0) { + write(n); + } else if (base == 10) { + if (n < 0) { + print('-'); + n = -n; + } + printNumber(n, 10); + } else { + printNumber(n, base); + } +} + +void Print::print(unsigned long n, int base) +{ + if (base == 0) write(n); + else printNumber(n, base); +} + +void Print::print(double n, int digits) +{ + printFloat(n, digits); +} + +void Print::println(void) +{ + print('\r'); + print('\n'); +} + +void Print::println(const String &s) +{ + print(s); + println(); +} + +void Print::println(const char c[]) +{ + print(c); + println(); +} + +void Print::println(char c, int base) +{ + print(c, base); + println(); +} + +void Print::println(unsigned char b, int base) +{ + print(b, base); + println(); +} + +void Print::println(int n, int base) +{ + print(n, base); + println(); +} + +void Print::println(unsigned int n, int base) +{ + print(n, base); + println(); +} + +void Print::println(long n, int base) +{ + print(n, base); + println(); +} + +void Print::println(unsigned long n, int base) +{ + print(n, base); + println(); +} + +void Print::println(double n, int digits) +{ + print(n, digits); + println(); +} + +// Private Methods ///////////////////////////////////////////////////////////// + +void Print::printNumber(unsigned long n, uint8_t base) +{ + unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars. + unsigned long i = 0; + + if (n == 0) { + print('0'); + return; + } + + while (n > 0) { + buf[i++] = n % base; + n /= base; + } + + for (; i > 0; i--) + print((char) (buf[i - 1] < 10 ? + '0' + buf[i - 1] : + 'A' + buf[i - 1] - 10)); +} + +void Print::printFloat(double number, uint8_t digits) +{ + // Handle negative numbers + if (number < 0.0) + { + print('-'); + number = -number; + } + + // Round correctly so that print(1.999, 2) prints as "2.00" + double rounding = 0.5; + for (uint8_t i=0; i 0) + print("."); + + // Extract digits from the remainder one at a time + while (digits-- > 0) + { + remainder *= 10.0; + int toPrint = int(remainder); + print(toPrint); + remainder -= toPrint; + } +} diff --git a/Marlin/Marlin/Sanguino/cores/arduino/Print.h b/Marlin/Marlin/Sanguino/cores/arduino/Print.h new file mode 100644 index 0000000000..b092ae51d1 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/Print.h @@ -0,0 +1,66 @@ +/* + Print.h - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef Print_h +#define Print_h + +#include +#include // for size_t + +#include "WString.h" + +#define DEC 10 +#define HEX 16 +#define OCT 8 +#define BIN 2 +#define BYTE 0 + +class Print +{ + private: + void printNumber(unsigned long, uint8_t); + void printFloat(double, uint8_t); + public: + virtual void write(uint8_t) = 0; + virtual void write(const char *str); + virtual void write(const uint8_t *buffer, size_t size); + + void print(const String &); + void print(const char[]); + void print(char, int = BYTE); + void print(unsigned char, int = BYTE); + void print(int, int = DEC); + void print(unsigned int, int = DEC); + void print(long, int = DEC); + void print(unsigned long, int = DEC); + void print(double, int = 2); + + void println(const String &s); + void println(const char[]); + void println(char, int = BYTE); + void println(unsigned char, int = BYTE); + void println(int, int = DEC); + void println(unsigned int, int = DEC); + void println(long, int = DEC); + void println(unsigned long, int = DEC); + void println(double, int = 2); + void println(void); +}; + +#endif diff --git a/Marlin/Marlin/Sanguino/cores/arduino/Stream.h b/Marlin/Marlin/Sanguino/cores/arduino/Stream.h new file mode 100644 index 0000000000..93d8275dc2 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/Stream.h @@ -0,0 +1,35 @@ +/* + Stream.h - base class for character-based streams. + Copyright (c) 2010 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef Stream_h +#define Stream_h + +#include +#include "Print.h" + +class Stream : public Print +{ + public: + virtual int available() = 0; + virtual int read() = 0; + virtual int peek() = 0; + virtual void flush() = 0; +}; + +#endif diff --git a/Marlin/Marlin/Sanguino/cores/arduino/Tone.cpp b/Marlin/Marlin/Sanguino/cores/arduino/Tone.cpp new file mode 100644 index 0000000000..c3910e7a61 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/Tone.cpp @@ -0,0 +1,601 @@ +/* Tone.cpp + + A Tone Generator Library + + Written by Brett Hagman + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Version Modified By Date Comments +------- ----------- -------- -------- +0001 B Hagman 09/08/02 Initial coding +0002 B Hagman 09/08/18 Multiple pins +0003 B Hagman 09/08/18 Moved initialization from constructor to begin() +0004 B Hagman 09/09/26 Fixed problems with ATmega8 +0005 B Hagman 09/11/23 Scanned prescalars for best fit on 8 bit timers + 09/11/25 Changed pin toggle method to XOR + 09/11/25 Fixed timer0 from being excluded +0006 D Mellis 09/12/29 Replaced objects with functions +0007 M Sproul 10/08/29 Changed #ifdefs from cpu to register +*************************************************/ + +#include +#include +#include "wiring.h" +#include "pins_arduino.h" + +#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__) +#define TCCR2A TCCR2 +#define TCCR2B TCCR2 +#define COM2A1 COM21 +#define COM2A0 COM20 +#define OCR2A OCR2 +#define TIMSK2 TIMSK +#define OCIE2A OCIE2 +#define TIMER2_COMPA_vect TIMER2_COMP_vect +#define TIMSK1 TIMSK +#endif + +// timerx_toggle_count: +// > 0 - duration specified +// = 0 - stopped +// < 0 - infinitely (until stop() method called, or new play() called) + +#if !defined(__AVR_ATmega8__) +volatile long timer0_toggle_count; +volatile uint8_t *timer0_pin_port; +volatile uint8_t timer0_pin_mask; +#endif + +volatile long timer1_toggle_count; +volatile uint8_t *timer1_pin_port; +volatile uint8_t timer1_pin_mask; +volatile long timer2_toggle_count; +volatile uint8_t *timer2_pin_port; +volatile uint8_t timer2_pin_mask; + +#if defined(TIMSK3) +volatile long timer3_toggle_count; +volatile uint8_t *timer3_pin_port; +volatile uint8_t timer3_pin_mask; +#endif + +#if defined(TIMSK4) +volatile long timer4_toggle_count; +volatile uint8_t *timer4_pin_port; +volatile uint8_t timer4_pin_mask; +#endif + +#if defined(TIMSK5) +volatile long timer5_toggle_count; +volatile uint8_t *timer5_pin_port; +volatile uint8_t timer5_pin_mask; +#endif + + +// MLS: This does not make sense, the 3 options are the same +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + +#define AVAILABLE_TONE_PINS 1 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 3, 4, 5, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255, 255, 255, 255 */ }; + +#elif defined(__AVR_ATmega8__) + +#define AVAILABLE_TONE_PINS 1 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ }; + +#else + +#define AVAILABLE_TONE_PINS 1 + +// Leave timer 0 to last. +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255 */ }; + +#endif + + + +static int8_t toneBegin(uint8_t _pin) +{ + int8_t _timer = -1; + + // if we're already using the pin, the timer should be configured. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + return pgm_read_byte(tone_pin_to_timer_PGM + i); + } + } + + // search for an unused timer. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == 255) { + tone_pins[i] = _pin; + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + break; + } + } + + if (_timer != -1) + { + // Set timer specific stuff + // All timers in CTC mode + // 8 bit timers will require changing prescalar values, + // whereas 16 bit timers are set to either ck/1 or ck/64 prescalar + switch (_timer) + { + #if defined(TCCR0A) && defined(TCCR0B) + case 0: + // 8 bit timer + TCCR0A = 0; + TCCR0B = 0; + bitWrite(TCCR0A, WGM01, 1); + bitWrite(TCCR0B, CS00, 1); + timer0_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer0_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR1A) && defined(TCCR1B) && defined(WGM12) + case 1: + // 16 bit timer + TCCR1A = 0; + TCCR1B = 0; + bitWrite(TCCR1B, WGM12, 1); + bitWrite(TCCR1B, CS10, 1); + timer1_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer1_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR2A) && defined(TCCR2B) + case 2: + // 8 bit timer + TCCR2A = 0; + TCCR2B = 0; + bitWrite(TCCR2A, WGM21, 1); + bitWrite(TCCR2B, CS20, 1); + timer2_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer2_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR3A) && defined(TCCR3B) && defined(TIMSK3) + case 3: + // 16 bit timer + TCCR3A = 0; + TCCR3B = 0; + bitWrite(TCCR3B, WGM32, 1); + bitWrite(TCCR3B, CS30, 1); + timer3_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer3_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR4A) && defined(TCCR4B) && defined(TIMSK4) + case 4: + // 16 bit timer + TCCR4A = 0; + TCCR4B = 0; + #if defined(WGM42) + bitWrite(TCCR4B, WGM42, 1); + #elif defined(CS43) + #warning this may not be correct + // atmega32u4 + bitWrite(TCCR4B, CS43, 1); + #endif + bitWrite(TCCR4B, CS40, 1); + timer4_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer4_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR5A) && defined(TCCR5B) && defined(TIMSK5) + case 5: + // 16 bit timer + TCCR5A = 0; + TCCR5B = 0; + bitWrite(TCCR5B, WGM52, 1); + bitWrite(TCCR5B, CS50, 1); + timer5_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer5_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + } + } + + return _timer; +} + + + +// frequency (in hertz) and duration (in milliseconds). + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration) +{ + uint8_t prescalarbits = 0b001; + long toggle_count = 0; + uint32_t ocr = 0; + int8_t _timer; + + _timer = toneBegin(_pin); + + if (_timer >= 0) + { + // Set the pinMode as OUTPUT + pinMode(_pin, OUTPUT); + + // if we are using an 8 bit timer, scan through prescalars to find the best fit + if (_timer == 0 || _timer == 2) + { + ocr = F_CPU / frequency / 2 - 1; + prescalarbits = 0b001; // ck/1: same for both timers + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 8 - 1; + prescalarbits = 0b010; // ck/8: same for both timers + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 32 - 1; + prescalarbits = 0b011; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = _timer == 0 ? 0b011 : 0b100; + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 128 - 1; + prescalarbits = 0b101; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 256 - 1; + prescalarbits = _timer == 0 ? 0b100 : 0b110; + if (ocr > 255) + { + // can't do any better than /1024 + ocr = F_CPU / frequency / 2 / 1024 - 1; + prescalarbits = _timer == 0 ? 0b101 : 0b111; + } + } + } + } + +#if defined(TCCR0B) + if (_timer == 0) + { + TCCR0B = prescalarbits; + } + else +#endif +#if defined(TCCR2B) + { + TCCR2B = prescalarbits; + } +#else + { + // dummy place holder to make the above ifdefs work + } +#endif + } + else + { + // two choices for the 16 bit timers: ck/1 or ck/64 + ocr = F_CPU / frequency / 2 - 1; + + prescalarbits = 0b001; + if (ocr > 0xffff) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = 0b011; + } + + if (_timer == 1) + { +#if defined(TCCR1B) + TCCR1B = (TCCR1B & 0b11111000) | prescalarbits; +#endif + } +#if defined(TCCR3B) + else if (_timer == 3) + TCCR3B = (TCCR3B & 0b11111000) | prescalarbits; +#endif +#if defined(TCCR4B) + else if (_timer == 4) + TCCR4B = (TCCR4B & 0b11111000) | prescalarbits; +#endif +#if defined(TCCR5B) + else if (_timer == 5) + TCCR5B = (TCCR5B & 0b11111000) | prescalarbits; +#endif + + } + + + // Calculate the toggle count + if (duration > 0) + { + toggle_count = 2 * frequency * duration / 1000; + } + else + { + toggle_count = -1; + } + + // Set the OCR for the given timer, + // set the toggle count, + // then turn on the interrupts + switch (_timer) + { + +#if defined(OCR0A) && defined(TIMSK0) && defined(OCIE0A) + case 0: + OCR0A = ocr; + timer0_toggle_count = toggle_count; + bitWrite(TIMSK0, OCIE0A, 1); + break; +#endif + + case 1: +#if defined(OCR1A) && defined(TIMSK1) && defined(OCIE1A) + OCR1A = ocr; + timer1_toggle_count = toggle_count; + bitWrite(TIMSK1, OCIE1A, 1); +#elif defined(OCR1A) && defined(TIMSK) && defined(OCIE1A) + // this combination is for at least the ATmega32 + OCR1A = ocr; + timer1_toggle_count = toggle_count; + bitWrite(TIMSK, OCIE1A, 1); +#endif + break; + +#if defined(OCR2A) && defined(TIMSK2) && defined(OCIE2A) + case 2: + OCR2A = ocr; + timer2_toggle_count = toggle_count; + bitWrite(TIMSK2, OCIE2A, 1); + break; +#endif + +#if defined(TIMSK3) + case 3: + OCR3A = ocr; + timer3_toggle_count = toggle_count; + bitWrite(TIMSK3, OCIE3A, 1); + break; +#endif + +#if defined(TIMSK4) + case 4: + OCR4A = ocr; + timer4_toggle_count = toggle_count; + bitWrite(TIMSK4, OCIE4A, 1); + break; +#endif + +#if defined(OCR5A) && defined(TIMSK5) && defined(OCIE5A) + case 5: + OCR5A = ocr; + timer5_toggle_count = toggle_count; + bitWrite(TIMSK5, OCIE5A, 1); + break; +#endif + + } + } +} + + +// XXX: this function only works properly for timer 2 (the only one we use +// currently). for the others, it should end the tone, but won't restore +// proper PWM functionality for the timer. +void disableTimer(uint8_t _timer) +{ + switch (_timer) + { + case 0: + #if defined(TIMSK0) + TIMSK0 = 0; + #elif defined(TIMSK) + TIMSK = 0; // atmega32 + #endif + break; + +#if defined(TIMSK1) && defined(OCIE1A) + case 1: + bitWrite(TIMSK1, OCIE1A, 0); + break; +#endif + + case 2: + #if defined(TIMSK2) && defined(OCIE2A) + bitWrite(TIMSK2, OCIE2A, 0); // disable interrupt + #endif + #if defined(TCCR2A) && defined(WGM20) + TCCR2A = (1 << WGM20); + #endif + #if defined(TCCR2B) && defined(CS22) + TCCR2B = (TCCR2B & 0b11111000) | (1 << CS22); + #endif + #if defined(OCR2A) + OCR2A = 0; + #endif + break; + +#if defined(TIMSK3) + case 3: + TIMSK3 = 0; + break; +#endif + +#if defined(TIMSK4) + case 4: + TIMSK4 = 0; + break; +#endif + +#if defined(TIMSK5) + case 5: + TIMSK5 = 0; + break; +#endif + } +} + + +void noTone(uint8_t _pin) +{ + int8_t _timer = -1; + + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + tone_pins[i] = 255; + } + } + + disableTimer(_timer); + + digitalWrite(_pin, 0); +} + +#if 0 +#if !defined(__AVR_ATmega8__) +ISR(TIMER0_COMPA_vect) +{ + if (timer0_toggle_count != 0) + { + // toggle the pin + *timer0_pin_port ^= timer0_pin_mask; + + if (timer0_toggle_count > 0) + timer0_toggle_count--; + } + else + { + disableTimer(0); + *timer0_pin_port &= ~(timer0_pin_mask); // keep pin low after stop + } +} +#endif + + +ISR(TIMER1_COMPA_vect) +{ + if (timer1_toggle_count != 0) + { + // toggle the pin + *timer1_pin_port ^= timer1_pin_mask; + + if (timer1_toggle_count > 0) + timer1_toggle_count--; + } + else + { + disableTimer(1); + *timer1_pin_port &= ~(timer1_pin_mask); // keep pin low after stop + } +} +#endif + + +ISR(TIMER2_COMPA_vect) +{ + + if (timer2_toggle_count != 0) + { + // toggle the pin + *timer2_pin_port ^= timer2_pin_mask; + + if (timer2_toggle_count > 0) + timer2_toggle_count--; + } + else + { + // need to call noTone() so that the tone_pins[] entry is reset, so the + // timer gets initialized next time we call tone(). + // XXX: this assumes timer 2 is always the first one used. + noTone(tone_pins[0]); +// disableTimer(2); +// *timer2_pin_port &= ~(timer2_pin_mask); // keep pin low after stop + } +} + + + +//#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#if 0 + +ISR(TIMER3_COMPA_vect) +{ + if (timer3_toggle_count != 0) + { + // toggle the pin + *timer3_pin_port ^= timer3_pin_mask; + + if (timer3_toggle_count > 0) + timer3_toggle_count--; + } + else + { + disableTimer(3); + *timer3_pin_port &= ~(timer3_pin_mask); // keep pin low after stop + } +} + +ISR(TIMER4_COMPA_vect) +{ + if (timer4_toggle_count != 0) + { + // toggle the pin + *timer4_pin_port ^= timer4_pin_mask; + + if (timer4_toggle_count > 0) + timer4_toggle_count--; + } + else + { + disableTimer(4); + *timer4_pin_port &= ~(timer4_pin_mask); // keep pin low after stop + } +} + +ISR(TIMER5_COMPA_vect) +{ + if (timer5_toggle_count != 0) + { + // toggle the pin + *timer5_pin_port ^= timer5_pin_mask; + + if (timer5_toggle_count > 0) + timer5_toggle_count--; + } + else + { + disableTimer(5); + *timer5_pin_port &= ~(timer5_pin_mask); // keep pin low after stop + } +} + +#endif diff --git a/Marlin/Marlin/Sanguino/cores/arduino/WCharacter.h b/Marlin/Marlin/Sanguino/cores/arduino/WCharacter.h new file mode 100644 index 0000000000..79733b50a5 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/WCharacter.h @@ -0,0 +1,168 @@ +/* + WCharacter.h - Character utility functions for Wiring & Arduino + Copyright (c) 2010 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef Character_h +#define Character_h + +#include + +// WCharacter.h prototypes +inline boolean isAlphaNumeric(int c) __attribute__((always_inline)); +inline boolean isAlpha(int c) __attribute__((always_inline)); +inline boolean isAscii(int c) __attribute__((always_inline)); +inline boolean isWhitespace(int c) __attribute__((always_inline)); +inline boolean isControl(int c) __attribute__((always_inline)); +inline boolean isDigit(int c) __attribute__((always_inline)); +inline boolean isGraph(int c) __attribute__((always_inline)); +inline boolean isLowerCase(int c) __attribute__((always_inline)); +inline boolean isPrintable(int c) __attribute__((always_inline)); +inline boolean isPunct(int c) __attribute__((always_inline)); +inline boolean isSpace(int c) __attribute__((always_inline)); +inline boolean isUpperCase(int c) __attribute__((always_inline)); +inline boolean isHexadecimalDigit(int c) __attribute__((always_inline)); +inline int toAscii(int c) __attribute__((always_inline)); +inline int toLowerCase(int c) __attribute__((always_inline)); +inline int toUpperCase(int c)__attribute__((always_inline)); + + +// Checks for an alphanumeric character. +// It is equivalent to (isalpha(c) || isdigit(c)). +inline boolean isAlphaNumeric(int c) +{ + return ( isalnum(c) == 0 ? false : true); +} + + +// Checks for an alphabetic character. +// It is equivalent to (isupper(c) || islower(c)). +inline boolean isAlpha(int c) +{ + return ( isalpha(c) == 0 ? false : true); +} + + +// Checks whether c is a 7-bit unsigned char value +// that fits into the ASCII character set. +inline boolean isAscii(int c) +{ + return ( isascii (c) == 0 ? false : true); +} + + +// Checks for a blank character, that is, a space or a tab. +inline boolean isWhitespace(int c) +{ + return ( isblank (c) == 0 ? false : true); +} + + +// Checks for a control character. +inline boolean isControl(int c) +{ + return ( iscntrl (c) == 0 ? false : true); +} + + +// Checks for a digit (0 through 9). +inline boolean isDigit(int c) +{ + return ( isdigit (c) == 0 ? false : true); +} + + +// Checks for any printable character except space. +inline boolean isGraph(int c) +{ + return ( isgraph (c) == 0 ? false : true); +} + + +// Checks for a lower-case character. +inline boolean isLowerCase(int c) +{ + return (islower (c) == 0 ? false : true); +} + + +// Checks for any printable character including space. +inline boolean isPrintable(int c) +{ + return ( isprint (c) == 0 ? false : true); +} + + +// Checks for any printable character which is not a space +// or an alphanumeric character. +inline boolean isPunct(int c) +{ + return ( ispunct (c) == 0 ? false : true); +} + + +// Checks for white-space characters. For the avr-libc library, +// these are: space, formfeed ('\f'), newline ('\n'), carriage +// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v'). +inline boolean isSpace(int c) +{ + return ( isspace (c) == 0 ? false : true); +} + + +// Checks for an uppercase letter. +inline boolean isUpperCase(int c) +{ + return ( isupper (c) == 0 ? false : true); +} + + +// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7 +// 8 9 a b c d e f A B C D E F. +inline boolean isHexadecimalDigit(int c) +{ + return ( isxdigit (c) == 0 ? false : true); +} + + +// Converts c to a 7-bit unsigned char value that fits into the +// ASCII character set, by clearing the high-order bits. +inline int toAscii(int c) +{ + return toascii (c); +} + + +// Warning: +// Many people will be unhappy if you use this function. +// This function will convert accented letters into random +// characters. + +// Converts the letter c to lower case, if possible. +inline int toLowerCase(int c) +{ + return tolower (c); +} + + +// Converts the letter c to upper case, if possible. +inline int toUpperCase(int c) +{ + return toupper (c); +} + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/Sanguino/cores/arduino/WConstants.h b/Marlin/Marlin/Sanguino/cores/arduino/WConstants.h new file mode 100644 index 0000000000..3e19ac44aa --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/WConstants.h @@ -0,0 +1 @@ +#include "wiring.h" diff --git a/Marlin/Marlin/Sanguino/cores/arduino/WInterrupts.c b/Marlin/Marlin/Sanguino/cores/arduino/WInterrupts.c new file mode 100644 index 0000000000..3b3e0c9ec4 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/WInterrupts.c @@ -0,0 +1,249 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.uniandes.edu.co + + Copyright (c) 2004-05 Hernando Barragan + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 24 November 2006 by David A. Mellis + Modified 1 August 2010 by Mark Sproul +*/ + +#include +#include +#include +#include +#include + +#include "WConstants.h" +#include "wiring_private.h" + +volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS]; +// volatile static voidFuncPtr twiIntFunc; + +void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) { + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) { + intFunc[interruptNum] = userFunc; + + // Configure the interrupt mode (trigger on low input, any change, rising + // edge, or falling edge). The mode constants were chosen to correspond + // to the configuration bits in the hardware register, so we simply shift + // the mode into place. + + // Enable the interrupt. + + switch (interruptNum) { +#if defined(EICRA) && defined(EICRB) && defined(EIMSK) + case 2: + EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + EIMSK |= (1 << INT0); + break; + case 3: + EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + EIMSK |= (1 << INT1); + break; + case 4: + EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20); + EIMSK |= (1 << INT2); + break; + case 5: + EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30); + EIMSK |= (1 << INT3); + break; + case 0: + EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40); + EIMSK |= (1 << INT4); + break; + case 1: + EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50); + EIMSK |= (1 << INT5); + break; + case 6: + EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60); + EIMSK |= (1 << INT6); + break; + case 7: + EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70); + EIMSK |= (1 << INT7); + break; +#else + case 0: + #if defined(EICRA) && defined(ISC00) && defined(EIMSK) + EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + EIMSK |= (1 << INT0); + #elif defined(MCUCR) && defined(ISC00) && defined(GICR) + MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + GICR |= (1 << INT0); + #elif defined(MCUCR) && defined(ISC00) && defined(GIMSK) + MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00); + GIMSK |= (1 << INT0); + #else + #error attachInterrupt not finished for this CPU (case 0) + #endif + break; + + case 1: + #if defined(EICRA) && defined(ISC10) && defined(ISC11) && defined(EIMSK) + EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + EIMSK |= (1 << INT1); + #elif defined(MCUCR) && defined(ISC10) && defined(ISC11) && defined(GICR) + MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + GICR |= (1 << INT1); + #elif defined(MCUCR) && defined(ISC10) && defined(GIMSK) && defined(GIMSK) + MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10); + GIMSK |= (1 << INT1); + #else + #warning attachInterrupt may need some more work for this cpu (case 1) + #endif + break; +#endif + } + } +} + +void detachInterrupt(uint8_t interruptNum) { + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) { + // Disable the interrupt. (We can't assume that interruptNum is equal + // to the number of the EIMSK bit to clear, as this isn't true on the + // ATmega8. There, INT0 is 6 and INT1 is 7.) + switch (interruptNum) { +#if defined(EICRA) && defined(EICRB) && defined(EIMSK) + case 2: + EIMSK &= ~(1 << INT0); + break; + case 3: + EIMSK &= ~(1 << INT1); + break; + case 4: + EIMSK &= ~(1 << INT2); + break; + case 5: + EIMSK &= ~(1 << INT3); + break; + case 0: + EIMSK &= ~(1 << INT4); + break; + case 1: + EIMSK &= ~(1 << INT5); + break; + case 6: + EIMSK &= ~(1 << INT6); + break; + case 7: + EIMSK &= ~(1 << INT7); + break; +#else + case 0: + #if defined(EIMSK) && defined(INT0) + EIMSK &= ~(1 << INT0); + #elif defined(GICR) && defined(ISC00) + GICR &= ~(1 << INT0); // atmega32 + #elif defined(GIMSK) && defined(INT0) + GIMSK &= ~(1 << INT0); + #else + #error detachInterrupt not finished for this cpu + #endif + break; + + case 1: + #if defined(EIMSK) && defined(INT1) + EIMSK &= ~(1 << INT1); + #elif defined(GICR) && defined(INT1) + GICR &= ~(1 << INT1); // atmega32 + #elif defined(GIMSK) && defined(INT1) + GIMSK &= ~(1 << INT1); + #else + #warning detachInterrupt may need some more work for this cpu (case 1) + #endif + break; +#endif + } + + intFunc[interruptNum] = 0; + } +} + +/* +void attachInterruptTwi(void (*userFunc)(void) ) { + twiIntFunc = userFunc; +} +*/ + +#if defined(EICRA) && defined(EICRB) + +SIGNAL(INT0_vect) { + if(intFunc[EXTERNAL_INT_2]) + intFunc[EXTERNAL_INT_2](); +} + +SIGNAL(INT1_vect) { + if(intFunc[EXTERNAL_INT_3]) + intFunc[EXTERNAL_INT_3](); +} + +SIGNAL(INT2_vect) { + if(intFunc[EXTERNAL_INT_4]) + intFunc[EXTERNAL_INT_4](); +} + +SIGNAL(INT3_vect) { + if(intFunc[EXTERNAL_INT_5]) + intFunc[EXTERNAL_INT_5](); +} + +SIGNAL(INT4_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +SIGNAL(INT5_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +SIGNAL(INT6_vect) { + if(intFunc[EXTERNAL_INT_6]) + intFunc[EXTERNAL_INT_6](); +} + +SIGNAL(INT7_vect) { + if(intFunc[EXTERNAL_INT_7]) + intFunc[EXTERNAL_INT_7](); +} + +#else + +SIGNAL(INT0_vect) { + if(intFunc[EXTERNAL_INT_0]) + intFunc[EXTERNAL_INT_0](); +} + +SIGNAL(INT1_vect) { + if(intFunc[EXTERNAL_INT_1]) + intFunc[EXTERNAL_INT_1](); +} + +#endif + +/* +SIGNAL(SIG_2WIRE_SERIAL) { + if(twiIntFunc) + twiIntFunc(); +} +*/ + diff --git a/Marlin/Marlin/Sanguino/cores/arduino/WMath.cpp b/Marlin/Marlin/Sanguino/cores/arduino/WMath.cpp new file mode 100644 index 0000000000..2120c4cc10 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/WMath.cpp @@ -0,0 +1,60 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.org.co + Copyright (c) 2004-06 Hernando Barragan + Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/ + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +extern "C" { + #include "stdlib.h" +} + +void randomSeed(unsigned int seed) +{ + if (seed != 0) { + srandom(seed); + } +} + +long random(long howbig) +{ + if (howbig == 0) { + return 0; + } + return random() % howbig; +} + +long random(long howsmall, long howbig) +{ + if (howsmall >= howbig) { + return howsmall; + } + long diff = howbig - howsmall; + return random(diff) + howsmall; +} + +long map(long x, long in_min, long in_max, long out_min, long out_max) +{ + return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min; +} + +unsigned int makeWord(unsigned int w) { return w; } +unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; } \ No newline at end of file diff --git a/Marlin/Marlin/Sanguino/cores/arduino/WProgram.h b/Marlin/Marlin/Sanguino/cores/arduino/WProgram.h new file mode 100644 index 0000000000..f73e760bbe --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/WProgram.h @@ -0,0 +1,63 @@ +#ifndef WProgram_h +#define WProgram_h + +#include +#include +#include + +#include + +#include "wiring.h" + +#ifdef __cplusplus +#include "WCharacter.h" +#include "WString.h" +#include "HardwareSerial.h" + +uint16_t makeWord(uint16_t w); +uint16_t makeWord(byte h, byte l); + +#define word(...) makeWord(__VA_ARGS__) + +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); +void noTone(uint8_t _pin); + +// WMath prototypes +long random(long); +long random(long, long); +void randomSeed(unsigned int); +long map(long, long, long, long, long); + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +const static uint8_t A0 = 54; +const static uint8_t A1 = 55; +const static uint8_t A2 = 56; +const static uint8_t A3 = 57; +const static uint8_t A4 = 58; +const static uint8_t A5 = 59; +const static uint8_t A6 = 60; +const static uint8_t A7 = 61; +const static uint8_t A8 = 62; +const static uint8_t A9 = 63; +const static uint8_t A10 = 64; +const static uint8_t A11 = 65; +const static uint8_t A12 = 66; +const static uint8_t A13 = 67; +const static uint8_t A14 = 68; +const static uint8_t A15 = 69; +#else +const static uint8_t A0 = 14; +const static uint8_t A1 = 15; +const static uint8_t A2 = 16; +const static uint8_t A3 = 17; +const static uint8_t A4 = 18; +const static uint8_t A5 = 19; +const static uint8_t A6 = 20; +const static uint8_t A7 = 21; +#endif + +#endif + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/Sanguino/cores/arduino/WString.cpp b/Marlin/Marlin/Sanguino/cores/arduino/WString.cpp new file mode 100644 index 0000000000..db5a441dc2 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/WString.cpp @@ -0,0 +1,443 @@ +/* + WString.cpp - String library for Wiring & Arduino + Copyright (c) 2009-10 Hernando Barragan. All rights reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include +#include "WProgram.h" +#include "WString.h" + + +String::String( const char *value ) +{ + if ( value == NULL ) + value = ""; + getBuffer( _length = strlen( value ) ); + if ( _buffer != NULL ) + strcpy( _buffer, value ); +} + +String::String( const String &value ) +{ + getBuffer( _length = value._length ); + if ( _buffer != NULL ) + strcpy( _buffer, value._buffer ); +} + +String::String( const char value ) +{ + _length = 1; + getBuffer(1); + if ( _buffer != NULL ) { + _buffer[0] = value; + _buffer[1] = 0; + } +} + +String::String( const unsigned char value ) +{ + _length = 1; + getBuffer(1); + if ( _buffer != NULL) { + _buffer[0] = value; + _buffer[1] = 0; + } +} + +String::String( const int value, const int base ) +{ + char buf[33]; + itoa((signed long)value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const unsigned int value, const int base ) +{ + char buf[33]; + ultoa((unsigned long)value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const long value, const int base ) +{ + char buf[33]; + ltoa(value, buf, base); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +String::String( const unsigned long value, const int base ) +{ + char buf[33]; + ultoa(value, buf, 10); + getBuffer( _length = strlen(buf) ); + if ( _buffer != NULL ) + strcpy( _buffer, buf ); +} + +char String::charAt( unsigned int loc ) const +{ + return operator[]( loc ); +} + +void String::setCharAt( unsigned int loc, const char aChar ) +{ + if(_buffer == NULL) return; + if(_length > loc) { + _buffer[loc] = aChar; + } +} + +int String::compareTo( const String &s2 ) const +{ + return strcmp( _buffer, s2._buffer ); +} + +const String & String::concat( const String &s2 ) +{ + return (*this) += s2; +} + +const String & String::operator=( const String &rhs ) +{ + if ( this == &rhs ) + return *this; + + if ( rhs._length > _length ) + { + free(_buffer); + getBuffer( rhs._length ); + } + + if ( _buffer != NULL ) { + _length = rhs._length; + strcpy( _buffer, rhs._buffer ); + } + return *this; +} + +//const String & String::operator+=( const char aChar ) +//{ +// if ( _length == _capacity ) +// doubleBuffer(); +// +// _buffer[ _length++ ] = aChar; +// _buffer[ _length ] = '\0'; +// return *this; +//} + +const String & String::operator+=( const String &other ) +{ + _length += other._length; + if ( _length > _capacity ) + { + char *temp = (char *)realloc(_buffer, _length + 1); + if ( temp != NULL ) { + _buffer = temp; + _capacity = _length; + } else { + _length -= other._length; + return *this; + } + } + strcat( _buffer, other._buffer ); + return *this; +} + + +int String::operator==( const String &rhs ) const +{ + return ( _length == rhs._length && strcmp( _buffer, rhs._buffer ) == 0 ); +} + +int String::operator!=( const String &rhs ) const +{ + return ( _length != rhs.length() || strcmp( _buffer, rhs._buffer ) != 0 ); +} + +int String::operator<( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) < 0; +} + +int String::operator>( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) > 0; +} + +int String::operator<=( const String &rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) <= 0; +} + +int String::operator>=( const String & rhs ) const +{ + return strcmp( _buffer, rhs._buffer ) >= 0; +} + +char & String::operator[]( unsigned int index ) +{ + static char dummy_writable_char; + if (index >= _length || !_buffer) { + dummy_writable_char = 0; + return dummy_writable_char; + } + return _buffer[ index ]; +} + +char String::operator[]( unsigned int index ) const +{ + // need to check for valid index, to do later + return _buffer[ index ]; +} + +boolean String::endsWith( const String &s2 ) const +{ + if ( _length < s2._length ) + return 0; + + return strcmp( &_buffer[ _length - s2._length], s2._buffer ) == 0; +} + +boolean String::equals( const String &s2 ) const +{ + return ( _length == s2._length && strcmp( _buffer,s2._buffer ) == 0 ); +} + +boolean String::equalsIgnoreCase( const String &s2 ) const +{ + if ( this == &s2 ) + return true; //1; + else if ( _length != s2._length ) + return false; //0; + + return strcmp(toLowerCase()._buffer, s2.toLowerCase()._buffer) == 0; +} + +String String::replace( char findChar, char replaceChar ) +{ + if ( _buffer == NULL ) return *this; + String theReturn = _buffer; + char* temp = theReturn._buffer; + while( (temp = strchr( temp, findChar )) != 0 ) + *temp = replaceChar; + + return theReturn; +} + +String String::replace( const String& match, const String& replace ) +{ + if ( _buffer == NULL ) return *this; + String temp = _buffer, newString; + + int loc; + while ( (loc = temp.indexOf( match )) != -1 ) + { + newString += temp.substring( 0, loc ); + newString += replace; + temp = temp.substring( loc + match._length ); + } + newString += temp; + return newString; +} + +int String::indexOf( char temp ) const +{ + return indexOf( temp, 0 ); +} + +int String::indexOf( char ch, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + const char* temp = strchr( &_buffer[fromIndex], ch ); + if ( temp == NULL ) + return -1; + + return temp - _buffer; +} + +int String::indexOf( const String &s2 ) const +{ + return indexOf( s2, 0 ); +} + +int String::indexOf( const String &s2, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + const char *theFind = strstr( &_buffer[ fromIndex ], s2._buffer ); + + if ( theFind == NULL ) + return -1; + + return theFind - _buffer; // pointer subtraction +} + +int String::lastIndexOf( char theChar ) const +{ + return lastIndexOf( theChar, _length - 1 ); +} + +int String::lastIndexOf( char ch, unsigned int fromIndex ) const +{ + if ( fromIndex >= _length ) + return -1; + + char tempchar = _buffer[fromIndex + 1]; + _buffer[fromIndex + 1] = '\0'; + char* temp = strrchr( _buffer, ch ); + _buffer[fromIndex + 1] = tempchar; + + if ( temp == NULL ) + return -1; + + return temp - _buffer; +} + +int String::lastIndexOf( const String &s2 ) const +{ + return lastIndexOf( s2, _length - s2._length ); +} + +int String::lastIndexOf( const String &s2, unsigned int fromIndex ) const +{ + // check for empty strings + if ( s2._length == 0 || s2._length - 1 > fromIndex || fromIndex >= _length ) + return -1; + + // matching first character + char temp = s2[ 0 ]; + + for ( int i = fromIndex; i >= 0; i-- ) + { + if ( _buffer[ i ] == temp && (*this).substring( i, i + s2._length ).equals( s2 ) ) + return i; + } + return -1; +} + +boolean String::startsWith( const String &s2 ) const +{ + if ( _length < s2._length ) + return 0; + + return startsWith( s2, 0 ); +} + +boolean String::startsWith( const String &s2, unsigned int offset ) const +{ + if ( offset > _length - s2._length ) + return 0; + + return strncmp( &_buffer[offset], s2._buffer, s2._length ) == 0; +} + +String String::substring( unsigned int left ) const +{ + return substring( left, _length ); +} + +String String::substring( unsigned int left, unsigned int right ) const +{ + if ( left > right ) + { + int temp = right; + right = left; + left = temp; + } + + if ( right > _length ) + { + right = _length; + } + + char temp = _buffer[ right ]; // save the replaced character + _buffer[ right ] = '\0'; + String outPut = ( _buffer + left ); // pointer arithmetic + _buffer[ right ] = temp; //restore character + return outPut; +} + +String String::toLowerCase() const +{ + String temp = _buffer; + + for ( unsigned int i = 0; i < _length; i++ ) + temp._buffer[ i ] = (char)tolower( temp._buffer[ i ] ); + return temp; +} + +String String::toUpperCase() const +{ + String temp = _buffer; + + for ( unsigned int i = 0; i < _length; i++ ) + temp._buffer[ i ] = (char)toupper( temp._buffer[ i ] ); + return temp; +} + +String String::trim() const +{ + if ( _buffer == NULL ) return *this; + String temp = _buffer; + unsigned int i,j; + + for ( i = 0; i < _length; i++ ) + { + if ( !isspace(_buffer[i]) ) + break; + } + + for ( j = temp._length - 1; j > i; j-- ) + { + if ( !isspace(_buffer[j]) ) + break; + } + + return temp.substring( i, j + 1); +} + +void String::getBytes(unsigned char *buf, unsigned int bufsize) +{ + if (!bufsize || !buf) return; + unsigned int len = bufsize - 1; + if (len > _length) len = _length; + strncpy((char *)buf, _buffer, len); + buf[len] = 0; +} + +void String::toCharArray(char *buf, unsigned int bufsize) +{ + if (!bufsize || !buf) return; + unsigned int len = bufsize - 1; + if (len > _length) len = _length; + strncpy(buf, _buffer, len); + buf[len] = 0; +} + + +long String::toInt() { + return atol(_buffer); +} diff --git a/Marlin/Marlin/Sanguino/cores/arduino/WString.h b/Marlin/Marlin/Sanguino/cores/arduino/WString.h new file mode 100644 index 0000000000..cadddb9476 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/WString.h @@ -0,0 +1,112 @@ +/* + WString.h - String library for Wiring & Arduino + Copyright (c) 2009-10 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef String_h +#define String_h + +//#include "WProgram.h" +#include +#include +#include + +class String +{ + public: + // constructors + String( const char *value = "" ); + String( const String &value ); + String( const char ); + String( const unsigned char ); + String( const int, const int base=10); + String( const unsigned int, const int base=10 ); + String( const long, const int base=10 ); + String( const unsigned long, const int base=10 ); + ~String() { free(_buffer); _length = _capacity = 0;} //added _length = _capacity = 0; + + // operators + const String & operator = ( const String &rhs ); + const String & operator +=( const String &rhs ); + //const String & operator +=( const char ); + int operator ==( const String &rhs ) const; + int operator !=( const String &rhs ) const; + int operator < ( const String &rhs ) const; + int operator > ( const String &rhs ) const; + int operator <=( const String &rhs ) const; + int operator >=( const String &rhs ) const; + char operator []( unsigned int index ) const; + char& operator []( unsigned int index ); + //operator const char *() const { return _buffer; } + + // general methods + char charAt( unsigned int index ) const; + int compareTo( const String &anotherString ) const; + unsigned char endsWith( const String &suffix ) const; + unsigned char equals( const String &anObject ) const; + unsigned char equalsIgnoreCase( const String &anotherString ) const; + int indexOf( char ch ) const; + int indexOf( char ch, unsigned int fromIndex ) const; + int indexOf( const String &str ) const; + int indexOf( const String &str, unsigned int fromIndex ) const; + int lastIndexOf( char ch ) const; + int lastIndexOf( char ch, unsigned int fromIndex ) const; + int lastIndexOf( const String &str ) const; + int lastIndexOf( const String &str, unsigned int fromIndex ) const; + const unsigned int length( ) const { return _length; } + void setCharAt(unsigned int index, const char ch); + unsigned char startsWith( const String &prefix ) const; + unsigned char startsWith( const String &prefix, unsigned int toffset ) const; + String substring( unsigned int beginIndex ) const; + String substring( unsigned int beginIndex, unsigned int endIndex ) const; + String toLowerCase( ) const; + String toUpperCase( ) const; + String trim( ) const; + void getBytes(unsigned char *buf, unsigned int bufsize); + void toCharArray(char *buf, unsigned int bufsize); + long toInt( ); + const String& concat( const String &str ); + String replace( char oldChar, char newChar ); + String replace( const String& match, const String& replace ); + friend String operator + ( String lhs, const String &rhs ); + + protected: + char *_buffer; // the actual char array + unsigned int _capacity; // the array length minus one (for the '\0') + unsigned int _length; // the String length (not counting the '\0') + + void getBuffer(unsigned int maxStrLen); + + private: + +}; + +// allocate buffer space +inline void String::getBuffer(unsigned int maxStrLen) +{ + _capacity = maxStrLen; + _buffer = (char *) malloc(_capacity + 1); + if (_buffer == NULL) _length = _capacity = 0; +} + +inline String operator+( String lhs, const String &rhs ) +{ + return lhs += rhs; +} + + +#endif diff --git a/Marlin/Marlin/Sanguino/cores/arduino/binary.h b/Marlin/Marlin/Sanguino/cores/arduino/binary.h new file mode 100644 index 0000000000..af1498033a --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/binary.h @@ -0,0 +1,515 @@ +#ifndef Binary_h +#define Binary_h + +#define B0 0 +#define B00 0 +#define B000 0 +#define B0000 0 +#define B00000 0 +#define B000000 0 +#define B0000000 0 +#define B00000000 0 +#define B1 1 +#define B01 1 +#define B001 1 +#define B0001 1 +#define B00001 1 +#define B000001 1 +#define B0000001 1 +#define B00000001 1 +#define B10 2 +#define B010 2 +#define B0010 2 +#define B00010 2 +#define B000010 2 +#define B0000010 2 +#define B00000010 2 +#define B11 3 +#define B011 3 +#define B0011 3 +#define B00011 3 +#define B000011 3 +#define B0000011 3 +#define B00000011 3 +#define B100 4 +#define B0100 4 +#define B00100 4 +#define B000100 4 +#define B0000100 4 +#define B00000100 4 +#define B101 5 +#define B0101 5 +#define B00101 5 +#define B000101 5 +#define B0000101 5 +#define B00000101 5 +#define B110 6 +#define B0110 6 +#define B00110 6 +#define B000110 6 +#define B0000110 6 +#define B00000110 6 +#define B111 7 +#define B0111 7 +#define B00111 7 +#define B000111 7 +#define B0000111 7 +#define B00000111 7 +#define B1000 8 +#define B01000 8 +#define B001000 8 +#define B0001000 8 +#define B00001000 8 +#define B1001 9 +#define B01001 9 +#define B001001 9 +#define B0001001 9 +#define B00001001 9 +#define B1010 10 +#define B01010 10 +#define B001010 10 +#define B0001010 10 +#define B00001010 10 +#define B1011 11 +#define B01011 11 +#define B001011 11 +#define B0001011 11 +#define B00001011 11 +#define B1100 12 +#define B01100 12 +#define B001100 12 +#define B0001100 12 +#define B00001100 12 +#define B1101 13 +#define B01101 13 +#define B001101 13 +#define B0001101 13 +#define B00001101 13 +#define B1110 14 +#define B01110 14 +#define B001110 14 +#define B0001110 14 +#define B00001110 14 +#define B1111 15 +#define B01111 15 +#define B001111 15 +#define B0001111 15 +#define B00001111 15 +#define B10000 16 +#define B010000 16 +#define B0010000 16 +#define B00010000 16 +#define B10001 17 +#define B010001 17 +#define B0010001 17 +#define B00010001 17 +#define B10010 18 +#define B010010 18 +#define B0010010 18 +#define B00010010 18 +#define B10011 19 +#define B010011 19 +#define B0010011 19 +#define B00010011 19 +#define B10100 20 +#define B010100 20 +#define B0010100 20 +#define B00010100 20 +#define B10101 21 +#define B010101 21 +#define B0010101 21 +#define B00010101 21 +#define B10110 22 +#define B010110 22 +#define B0010110 22 +#define B00010110 22 +#define B10111 23 +#define B010111 23 +#define B0010111 23 +#define B00010111 23 +#define B11000 24 +#define B011000 24 +#define B0011000 24 +#define B00011000 24 +#define B11001 25 +#define B011001 25 +#define B0011001 25 +#define B00011001 25 +#define B11010 26 +#define B011010 26 +#define B0011010 26 +#define B00011010 26 +#define B11011 27 +#define B011011 27 +#define B0011011 27 +#define B00011011 27 +#define B11100 28 +#define B011100 28 +#define B0011100 28 +#define B00011100 28 +#define B11101 29 +#define B011101 29 +#define B0011101 29 +#define B00011101 29 +#define B11110 30 +#define B011110 30 +#define B0011110 30 +#define B00011110 30 +#define B11111 31 +#define B011111 31 +#define B0011111 31 +#define B00011111 31 +#define B100000 32 +#define B0100000 32 +#define B00100000 32 +#define B100001 33 +#define B0100001 33 +#define B00100001 33 +#define B100010 34 +#define B0100010 34 +#define B00100010 34 +#define B100011 35 +#define B0100011 35 +#define B00100011 35 +#define B100100 36 +#define B0100100 36 +#define B00100100 36 +#define B100101 37 +#define B0100101 37 +#define B00100101 37 +#define B100110 38 +#define B0100110 38 +#define B00100110 38 +#define B100111 39 +#define B0100111 39 +#define B00100111 39 +#define B101000 40 +#define B0101000 40 +#define B00101000 40 +#define B101001 41 +#define B0101001 41 +#define B00101001 41 +#define B101010 42 +#define B0101010 42 +#define B00101010 42 +#define B101011 43 +#define B0101011 43 +#define B00101011 43 +#define B101100 44 +#define B0101100 44 +#define B00101100 44 +#define B101101 45 +#define B0101101 45 +#define B00101101 45 +#define B101110 46 +#define B0101110 46 +#define B00101110 46 +#define B101111 47 +#define B0101111 47 +#define B00101111 47 +#define B110000 48 +#define B0110000 48 +#define B00110000 48 +#define B110001 49 +#define B0110001 49 +#define B00110001 49 +#define B110010 50 +#define B0110010 50 +#define B00110010 50 +#define B110011 51 +#define B0110011 51 +#define B00110011 51 +#define B110100 52 +#define B0110100 52 +#define B00110100 52 +#define B110101 53 +#define B0110101 53 +#define B00110101 53 +#define B110110 54 +#define B0110110 54 +#define B00110110 54 +#define B110111 55 +#define B0110111 55 +#define B00110111 55 +#define B111000 56 +#define B0111000 56 +#define B00111000 56 +#define B111001 57 +#define B0111001 57 +#define B00111001 57 +#define B111010 58 +#define B0111010 58 +#define B00111010 58 +#define B111011 59 +#define B0111011 59 +#define B00111011 59 +#define B111100 60 +#define B0111100 60 +#define B00111100 60 +#define B111101 61 +#define B0111101 61 +#define B00111101 61 +#define B111110 62 +#define B0111110 62 +#define B00111110 62 +#define B111111 63 +#define B0111111 63 +#define B00111111 63 +#define B1000000 64 +#define B01000000 64 +#define B1000001 65 +#define B01000001 65 +#define B1000010 66 +#define B01000010 66 +#define B1000011 67 +#define B01000011 67 +#define B1000100 68 +#define B01000100 68 +#define B1000101 69 +#define B01000101 69 +#define B1000110 70 +#define B01000110 70 +#define B1000111 71 +#define B01000111 71 +#define B1001000 72 +#define B01001000 72 +#define B1001001 73 +#define B01001001 73 +#define B1001010 74 +#define B01001010 74 +#define B1001011 75 +#define B01001011 75 +#define B1001100 76 +#define B01001100 76 +#define B1001101 77 +#define B01001101 77 +#define B1001110 78 +#define B01001110 78 +#define B1001111 79 +#define B01001111 79 +#define B1010000 80 +#define B01010000 80 +#define B1010001 81 +#define B01010001 81 +#define B1010010 82 +#define B01010010 82 +#define B1010011 83 +#define B01010011 83 +#define B1010100 84 +#define B01010100 84 +#define B1010101 85 +#define B01010101 85 +#define B1010110 86 +#define B01010110 86 +#define B1010111 87 +#define B01010111 87 +#define B1011000 88 +#define B01011000 88 +#define B1011001 89 +#define B01011001 89 +#define B1011010 90 +#define B01011010 90 +#define B1011011 91 +#define B01011011 91 +#define B1011100 92 +#define B01011100 92 +#define B1011101 93 +#define B01011101 93 +#define B1011110 94 +#define B01011110 94 +#define B1011111 95 +#define B01011111 95 +#define B1100000 96 +#define B01100000 96 +#define B1100001 97 +#define B01100001 97 +#define B1100010 98 +#define B01100010 98 +#define B1100011 99 +#define B01100011 99 +#define B1100100 100 +#define B01100100 100 +#define B1100101 101 +#define B01100101 101 +#define B1100110 102 +#define B01100110 102 +#define B1100111 103 +#define B01100111 103 +#define B1101000 104 +#define B01101000 104 +#define B1101001 105 +#define B01101001 105 +#define B1101010 106 +#define B01101010 106 +#define B1101011 107 +#define B01101011 107 +#define B1101100 108 +#define B01101100 108 +#define B1101101 109 +#define B01101101 109 +#define B1101110 110 +#define B01101110 110 +#define B1101111 111 +#define B01101111 111 +#define B1110000 112 +#define B01110000 112 +#define B1110001 113 +#define B01110001 113 +#define B1110010 114 +#define B01110010 114 +#define B1110011 115 +#define B01110011 115 +#define B1110100 116 +#define B01110100 116 +#define B1110101 117 +#define B01110101 117 +#define B1110110 118 +#define B01110110 118 +#define B1110111 119 +#define B01110111 119 +#define B1111000 120 +#define B01111000 120 +#define B1111001 121 +#define B01111001 121 +#define B1111010 122 +#define B01111010 122 +#define B1111011 123 +#define B01111011 123 +#define B1111100 124 +#define B01111100 124 +#define B1111101 125 +#define B01111101 125 +#define B1111110 126 +#define B01111110 126 +#define B1111111 127 +#define B01111111 127 +#define B10000000 128 +#define B10000001 129 +#define B10000010 130 +#define B10000011 131 +#define B10000100 132 +#define B10000101 133 +#define B10000110 134 +#define B10000111 135 +#define B10001000 136 +#define B10001001 137 +#define B10001010 138 +#define B10001011 139 +#define B10001100 140 +#define B10001101 141 +#define B10001110 142 +#define B10001111 143 +#define B10010000 144 +#define B10010001 145 +#define B10010010 146 +#define B10010011 147 +#define B10010100 148 +#define B10010101 149 +#define B10010110 150 +#define B10010111 151 +#define B10011000 152 +#define B10011001 153 +#define B10011010 154 +#define B10011011 155 +#define B10011100 156 +#define B10011101 157 +#define B10011110 158 +#define B10011111 159 +#define B10100000 160 +#define B10100001 161 +#define B10100010 162 +#define B10100011 163 +#define B10100100 164 +#define B10100101 165 +#define B10100110 166 +#define B10100111 167 +#define B10101000 168 +#define B10101001 169 +#define B10101010 170 +#define B10101011 171 +#define B10101100 172 +#define B10101101 173 +#define B10101110 174 +#define B10101111 175 +#define B10110000 176 +#define B10110001 177 +#define B10110010 178 +#define B10110011 179 +#define B10110100 180 +#define B10110101 181 +#define B10110110 182 +#define B10110111 183 +#define B10111000 184 +#define B10111001 185 +#define B10111010 186 +#define B10111011 187 +#define B10111100 188 +#define B10111101 189 +#define B10111110 190 +#define B10111111 191 +#define B11000000 192 +#define B11000001 193 +#define B11000010 194 +#define B11000011 195 +#define B11000100 196 +#define B11000101 197 +#define B11000110 198 +#define B11000111 199 +#define B11001000 200 +#define B11001001 201 +#define B11001010 202 +#define B11001011 203 +#define B11001100 204 +#define B11001101 205 +#define B11001110 206 +#define B11001111 207 +#define B11010000 208 +#define B11010001 209 +#define B11010010 210 +#define B11010011 211 +#define B11010100 212 +#define B11010101 213 +#define B11010110 214 +#define B11010111 215 +#define B11011000 216 +#define B11011001 217 +#define B11011010 218 +#define B11011011 219 +#define B11011100 220 +#define B11011101 221 +#define B11011110 222 +#define B11011111 223 +#define B11100000 224 +#define B11100001 225 +#define B11100010 226 +#define B11100011 227 +#define B11100100 228 +#define B11100101 229 +#define B11100110 230 +#define B11100111 231 +#define B11101000 232 +#define B11101001 233 +#define B11101010 234 +#define B11101011 235 +#define B11101100 236 +#define B11101101 237 +#define B11101110 238 +#define B11101111 239 +#define B11110000 240 +#define B11110001 241 +#define B11110010 242 +#define B11110011 243 +#define B11110100 244 +#define B11110101 245 +#define B11110110 246 +#define B11110111 247 +#define B11111000 248 +#define B11111001 249 +#define B11111010 250 +#define B11111011 251 +#define B11111100 252 +#define B11111101 253 +#define B11111110 254 +#define B11111111 255 + +#endif diff --git a/Marlin/Marlin/Sanguino/cores/arduino/main.cpp b/Marlin/Marlin/Sanguino/cores/arduino/main.cpp new file mode 100644 index 0000000000..cc6e81d906 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/main.cpp @@ -0,0 +1,14 @@ +#include + +int main(void) +{ + init(); + + setup(); + + for (;;) + loop(); + + return 0; +} + diff --git a/Marlin/Marlin/Sanguino/cores/arduino/pins_arduino.c b/Marlin/Marlin/Sanguino/cores/arduino/pins_arduino.c new file mode 100644 index 0000000000..d5fa6fea3b --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/pins_arduino.c @@ -0,0 +1,200 @@ +/* + pins_arduino.c - pin definitions for the Arduino board + Part of Arduino / Wiring Lite + + Copyright (c) 2005 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: pins_arduino.c 254 2007-04-20 23:17:38Z mellis $ +*/ + +#include +#include "wiring_private.h" +#include "pins_arduino.h" + +// On the Sanguino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA644P / SANGUINO +// +// +---\/---+ +// INT0 (D 0) PB0 1| |40 PA0 (AI 0 / D31) +// INT1 (D 1) PB1 2| |39 PA1 (AI 1 / D30) +// INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) +// PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) +// PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) +// MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) +// MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) +// SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) +// RST 9| |32 AREF +// VCC 10| |31 GND +// GND 11| |30 AVCC +// XTAL2 12| |29 PC7 (D 23) +// XTAL1 13| |28 PC6 (D 22) +// RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI +// TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO +// RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS +// TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK +// PWM (D 12) PD4 18| |23 PC1 (D 17) SDA +// PWM (D 13) PD5 19| |22 PC0 (D 16) SCL +// PWM (D 14) PD6 20| |21 PD7 (D 15) PWM +// +--------+ +// + +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint8_t PROGMEM port_to_mode_PGM[] = +{ + NOT_A_PORT, + (uint8_t) (uint16_t) &DDRA, + (uint8_t) (uint16_t) &DDRB, + (uint8_t) (uint16_t) &DDRC, + (uint8_t) (uint16_t) &DDRD, +}; + +const uint8_t PROGMEM port_to_output_PGM[] = +{ + NOT_A_PORT, + (uint8_t) (uint16_t) &PORTA, + (uint8_t) (uint16_t) &PORTB, + (uint8_t) (uint16_t) &PORTC, + (uint8_t) (uint16_t) &PORTD, +}; + +const uint8_t PROGMEM port_to_input_PGM[] = +{ + NOT_A_PORT, + (uint8_t) (uint16_t) &PINA, + (uint8_t) (uint16_t) &PINB, + (uint8_t) (uint16_t) &PINC, + (uint8_t) (uint16_t) &PIND, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = +{ + PB, /* 0 */ + PB, + PB, + PB, + PB, + PB, + PB, + PB, + PD, /* 8 */ + PD, + PD, + PD, + PD, + PD, + PD, + PD, + PC, /* 16 */ + PC, + PC, + PC, + PC, + PC, + PC, + PC, + PA, /* 24 */ + PA, + PA, + PA, + PA, + PA, + PA, + PA /* 31 */ +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = +{ + _BV(0), /* 0, port B */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 8, port D */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 16, port C */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(7), /* 24, port A */ + _BV(6), + _BV(5), + _BV(4), + _BV(3), + _BV(2), + _BV(1), + _BV(0) +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = +{ + NOT_ON_TIMER, /* 0 - PB0 */ + NOT_ON_TIMER, /* 1 - PB1 */ + NOT_ON_TIMER, /* 2 - PB2 */ + TIMER0A, /* 3 - PB3 */ + TIMER0B, /* 4 - PB4 */ + NOT_ON_TIMER, /* 5 - PB5 */ + NOT_ON_TIMER, /* 6 - PB6 */ + NOT_ON_TIMER, /* 7 - PB7 */ + NOT_ON_TIMER, /* 8 - PD0 */ + NOT_ON_TIMER, /* 9 - PD1 */ + NOT_ON_TIMER, /* 10 - PD2 */ + NOT_ON_TIMER, /* 11 - PD3 */ + TIMER1B, /* 12 - PD4 */ + TIMER1A, /* 13 - PD5 */ + TIMER2B, /* 14 - PD6 */ + TIMER2A, /* 15 - PD7 */ + NOT_ON_TIMER, /* 16 - PC0 */ + NOT_ON_TIMER, /* 17 - PC1 */ + NOT_ON_TIMER, /* 18 - PC2 */ + NOT_ON_TIMER, /* 19 - PC3 */ + NOT_ON_TIMER, /* 20 - PC4 */ + NOT_ON_TIMER, /* 21 - PC5 */ + NOT_ON_TIMER, /* 22 - PC6 */ + NOT_ON_TIMER, /* 23 - PC7 */ + NOT_ON_TIMER, /* 24 - PA0 */ + NOT_ON_TIMER, /* 25 - PA1 */ + NOT_ON_TIMER, /* 26 - PA2 */ + NOT_ON_TIMER, /* 27 - PA3 */ + NOT_ON_TIMER, /* 28 - PA4 */ + NOT_ON_TIMER, /* 29 - PA5 */ + NOT_ON_TIMER, /* 30 - PA6 */ + NOT_ON_TIMER /* 31 - PA7 */ +}; diff --git a/Marlin/Marlin/Sanguino/cores/arduino/pins_arduino.h b/Marlin/Marlin/Sanguino/cores/arduino/pins_arduino.h new file mode 100644 index 0000000000..fd7ee5c8c2 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/pins_arduino.h @@ -0,0 +1,65 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define NOT_A_PIN 0 +#define NOT_A_PORT 0 + +#define NOT_ON_TIMER 0 +#define TIMER0A 1 +#define TIMER0B 2 +#define TIMER1A 3 +#define TIMER1B 4 +#define TIMER2 5 +#define TIMER2A 6 +#define TIMER2B 7 + +extern const uint8_t PROGMEM port_to_mode_PGM[]; +extern const uint8_t PROGMEM port_to_input_PGM[]; +extern const uint8_t PROGMEM port_to_output_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. +// +// These perform slightly better as macros compared to inline functions +// +#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) +#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) +#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) +#define analogInPinToBit(P) (P) +#define portOutputRegister(P) ( (volatile uint8_t *)( (uint16_t) pgm_read_byte( port_to_output_PGM + (P))) ) +#define portInputRegister(P) ( (volatile uint8_t *)( (uint16_t) pgm_read_byte( port_to_input_PGM + (P))) ) +#define portModeRegister(P) ( (volatile uint8_t *)( (uint16_t) pgm_read_byte( port_to_mode_PGM + (P))) ) + +#endif diff --git a/Marlin/Marlin/Sanguino/cores/arduino/wiring.c b/Marlin/Marlin/Sanguino/cores/arduino/wiring.c new file mode 100644 index 0000000000..b90d07e592 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/wiring.c @@ -0,0 +1,289 @@ +/* + wiring.c - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#include "wiring_private.h" + +// the prescaler is set so that timer0 ticks every 64 clock cycles, and the +// the overflow handler is called every 256 ticks. +#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256)) + +// the whole number of milliseconds per timer0 overflow +#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000) + +// the fractional number of milliseconds per timer0 overflow. we shift right +// by three to fit these numbers into a byte. (for the clock speeds we care +// about - 8 and 16 MHz - this doesn't lose precision.) +#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3) +#define FRACT_MAX (1000 >> 3) + +volatile unsigned long timer0_overflow_count = 0; +volatile unsigned long timer0_millis = 0; +static unsigned char timer0_fract = 0; + +SIGNAL(TIMER0_OVF_vect) +{ + // copy these to local variables so they can be stored in registers + // (volatile variables must be read from memory on every access) + unsigned long m = timer0_millis; + unsigned char f = timer0_fract; + + m += MILLIS_INC; + f += FRACT_INC; + if (f >= FRACT_MAX) { + f -= FRACT_MAX; + m += 1; + } + + timer0_fract = f; + timer0_millis = m; + timer0_overflow_count++; +} + +unsigned long millis() +{ + unsigned long m; + uint8_t oldSREG = SREG; + + // disable interrupts while we read timer0_millis or we might get an + // inconsistent value (e.g. in the middle of a write to timer0_millis) + cli(); + m = timer0_millis; + SREG = oldSREG; + + return m; +} + +unsigned long micros() { + unsigned long m; + uint8_t oldSREG = SREG, t; + + cli(); + m = timer0_overflow_count; +#if defined(TCNT0) + t = TCNT0; +#elif defined(TCNT0L) + t = TCNT0L; +#else + #error TIMER 0 not defined +#endif + + +#ifdef TIFR0 + if ((TIFR0 & _BV(TOV0)) && (t < 255)) + m++; +#else + if ((TIFR & _BV(TOV0)) && (t < 255)) + m++; +#endif + + SREG = oldSREG; + + return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond()); +} + +void delay(unsigned long ms) +{ + uint16_t start = (uint16_t)micros(); + + while (ms > 0) { + if (((uint16_t)micros() - start) >= 1000) { + ms--; + start += 1000; + } + } +} + +/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. */ +void delayMicroseconds(unsigned int us) +{ + // calling avrlib's delay_us() function with low values (e.g. 1 or + // 2 microseconds) gives delays longer than desired. + //delay_us(us); + +#if F_CPU >= 16000000L + // for the 16 MHz clock on most Arduino boards + + // for a one-microsecond delay, simply return. the overhead + // of the function call yields a delay of approximately 1 1/8 us. + if (--us == 0) + return; + + // the following loop takes a quarter of a microsecond (4 cycles) + // per iteration, so execute it four times for each microsecond of + // delay requested. + us <<= 2; + + // account for the time taken in the preceeding commands. + us -= 2; +#else + // for the 8 MHz internal clock on the ATmega168 + + // for a one- or two-microsecond delay, simply return. the overhead of + // the function calls takes more than two microseconds. can't just + // subtract two, since us is unsigned; we'd overflow. + if (--us == 0) + return; + if (--us == 0) + return; + + // the following loop takes half of a microsecond (4 cycles) + // per iteration, so execute it twice for each microsecond of + // delay requested. + us <<= 1; + + // partially compensate for the time taken by the preceeding commands. + // we can't subtract any more than this or we'd overflow w/ small delays. + us--; +#endif + + // busy wait + __asm__ __volatile__ ( + "1: sbiw %0,1" "\n\t" // 2 cycles + "brne 1b" : "=w" (us) : "0" (us) // 2 cycles + ); +} + +void init() +{ + // this needs to be called before setup() or some functions won't + // work there + sei(); + + // on the ATmega168, timer 0 is also used for fast hardware pwm + // (using phase-correct PWM would mean that timer 0 overflowed half as often + // resulting in different millis() behavior on the ATmega8 and ATmega168) +#if defined(TCCR0A) && defined(WGM01) + sbi(TCCR0A, WGM01); + sbi(TCCR0A, WGM00); +#endif + + // set timer 0 prescale factor to 64 +#if defined(__AVR_ATmega128__) + // CPU specific: different values for the ATmega128 + sbi(TCCR0, CS02); +#elif defined(TCCR0) && defined(CS01) && defined(CS00) + // this combination is for the standard atmega8 + sbi(TCCR0, CS01); + sbi(TCCR0, CS00); +#elif defined(TCCR0B) && defined(CS01) && defined(CS00) + // this combination is for the standard 168/328/1280/2560 + sbi(TCCR0B, CS01); + sbi(TCCR0B, CS00); +#elif defined(TCCR0A) && defined(CS01) && defined(CS00) + // this combination is for the __AVR_ATmega645__ series + sbi(TCCR0A, CS01); + sbi(TCCR0A, CS00); +#else + #error Timer 0 prescale factor 64 not set correctly +#endif + + // enable timer 0 overflow interrupt +#if defined(TIMSK) && defined(TOIE0) + sbi(TIMSK, TOIE0); +#elif defined(TIMSK0) && defined(TOIE0) + sbi(TIMSK0, TOIE0); +#else + #error Timer 0 overflow interrupt not set correctly +#endif + + // timers 1 and 2 are used for phase-correct hardware pwm + // this is better for motors as it ensures an even waveform + // note, however, that fast pwm mode can achieve a frequency of up + // 8 MHz (with a 16 MHz clock) at 50% duty cycle + + TCCR1B = 0; + + // set timer 1 prescale factor to 64 +#if defined(TCCR1B) && defined(CS11) && defined(CS10) + sbi(TCCR1B, CS11); + sbi(TCCR1B, CS10); +#elif defined(TCCR1) && defined(CS11) && defined(CS10) + sbi(TCCR1, CS11); + sbi(TCCR1, CS10); +#endif + // put timer 1 in 8-bit phase correct pwm mode +#if defined(TCCR1A) && defined(WGM10) + sbi(TCCR1A, WGM10); +#elif defined(TCCR1) + #warning this needs to be finished +#endif + + // set timer 2 prescale factor to 64 +#if defined(TCCR2) && defined(CS22) + sbi(TCCR2, CS22); +#elif defined(TCCR2B) && defined(CS22) + sbi(TCCR2B, CS22); +#else + #warning Timer 2 not finished (may not be present on this CPU) +#endif + + // configure timer 2 for phase correct pwm (8-bit) +#if defined(TCCR2) && defined(WGM20) + sbi(TCCR2, WGM20); +#elif defined(TCCR2A) && defined(WGM20) + sbi(TCCR2A, WGM20); +#else + #warning Timer 2 not finished (may not be present on this CPU) +#endif + +#if defined(TCCR3B) && defined(CS31) && defined(WGM30) + sbi(TCCR3B, CS31); // set timer 3 prescale factor to 64 + sbi(TCCR3B, CS30); + sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode +#endif + +#if defined(TCCR4B) && defined(CS41) && defined(WGM40) + sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64 + sbi(TCCR4B, CS40); + sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode +#endif + +#if defined(TCCR5B) && defined(CS51) && defined(WGM50) + sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64 + sbi(TCCR5B, CS50); + sbi(TCCR5A, WGM50); // put timer 5 in 8-bit phase correct pwm mode +#endif + +#if defined(ADCSRA) + // set a2d prescale factor to 128 + // 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range. + // XXX: this will not work properly for other clock speeds, and + // this code should use F_CPU to determine the prescale factor. + sbi(ADCSRA, ADPS2); + sbi(ADCSRA, ADPS1); + sbi(ADCSRA, ADPS0); + + // enable a2d conversions + sbi(ADCSRA, ADEN); +#endif + + // the bootloader connects pins 0 and 1 to the USART; disconnect them + // here so they can be used as normal digital i/o; they will be + // reconnected in Serial.begin() +#if defined(UCSRB) + UCSRB = 0; +#elif defined(UCSR0B) + UCSR0B = 0; +#endif +} diff --git a/Marlin/Marlin/Sanguino/cores/arduino/wiring.h b/Marlin/Marlin/Sanguino/cores/arduino/wiring.h new file mode 100644 index 0000000000..0a93678053 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/wiring.h @@ -0,0 +1,136 @@ +/* + wiring.h - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#ifndef Wiring_h +#define Wiring_h + +#include +#include +#include +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 + +#define true 0x1 +#define false 0x0 + +#define PI 3.1415926535897932384626433832795 +#define HALF_PI 1.5707963267948966192313216916398 +#define TWO_PI 6.283185307179586476925286766559 +#define DEG_TO_RAD 0.017453292519943295769236907684886 +#define RAD_TO_DEG 57.295779513082320876798154814105 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define INTERNAL1V1 2 +#define INTERNAL2V56 3 +#else +#define INTERNAL 3 +#endif +#define DEFAULT 1 +#define EXTERNAL 0 + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (F_CPU / 1000L) ) +#define microsecondsToClockCycles(a) ( ((a) * (F_CPU / 1000L)) / 1000L ) + +#define lowByte(w) ((uint8_t) ((w) & 0xff)) +#define highByte(w) ((uint8_t) ((w) >> 8)) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + + +typedef unsigned int word; + +#define bit(b) (1UL << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/Marlin/Sanguino/cores/arduino/wiring_analog.c b/Marlin/Marlin/Sanguino/cores/arduino/wiring_analog.c new file mode 100644 index 0000000000..d248f4ce82 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/wiring_analog.c @@ -0,0 +1,259 @@ +/* + wiring_analog.c - analog input and output + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 28 September 2010 by Mark Sproul + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +uint8_t analog_reference = DEFAULT; + +void analogReference(uint8_t mode) +{ + // can't actually set the register here because the default setting + // will connect AVCC and the AREF pin, which would cause a short if + // there's something connected to AREF. + analog_reference = mode; +} + +int analogRead(uint8_t pin) +{ + uint8_t low, high; + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + if (pin >= 54) pin -= 54; // allow for channel or pin numbers +#else + if (pin >= 14) pin -= 14; // allow for channel or pin numbers +#endif + +#if defined(ADCSRB) && defined(MUX5) + // the MUX5 bit of ADCSRB selects whether we're reading from channels + // 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high). + ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5); +#endif + + // set the analog reference (high two bits of ADMUX) and select the + // channel (low 4 bits). this also sets ADLAR (left-adjust result) + // to 0 (the default). +#if defined(ADMUX) + ADMUX = (analog_reference << 6) | (pin & 0x07); +#endif + + // without a delay, we seem to read from the wrong channel + //delay(1); + +#if defined(ADCSRA) && defined(ADCL) + // start the conversion + sbi(ADCSRA, ADSC); + + // ADSC is cleared when the conversion finishes + while (bit_is_set(ADCSRA, ADSC)); + + // we have to read ADCL first; doing so locks both ADCL + // and ADCH until ADCH is read. reading ADCL second would + // cause the results of each conversion to be discarded, + // as ADCL and ADCH would be locked when it completed. + low = ADCL; + high = ADCH; +#else + // we dont have an ADC, return 0 + low = 0; + high = 0; +#endif + + // combine the two bytes + return (high << 8) | low; +} + +// Right now, PWM output only works on the pins with +// hardware support. These are defined in the appropriate +// pins_*.c file. For the rest of the pins, we default +// to digital output. +void analogWrite(uint8_t pin, int val) +{ + // We need to make sure the PWM output is enabled for those pins + // that support it, as we turn it off when digitally reading or + // writing with them. Also, make sure the pin is in output mode + // for consistenty with Wiring, which doesn't require a pinMode + // call for the analog output pins. + pinMode(pin, OUTPUT); + if (val == 0) + { + digitalWrite(pin, LOW); + } + else if (val == 255) + { + digitalWrite(pin, HIGH); + } + else + { + switch(digitalPinToTimer(pin)) + { + // XXX fix needed for atmega8 + #if defined(TCCR0) && defined(COM00) && !defined(__AVR_ATmega8__) + case TIMER0A: + // connect pwm to pin on timer 0 + sbi(TCCR0, COM00); + OCR0 = val; // set pwm duty + break; + #endif + + #if defined(TCCR0A) && defined(COM0A1) + case TIMER0A: + // connect pwm to pin on timer 0, channel A + sbi(TCCR0A, COM0A1); + OCR0A = val; // set pwm duty + break; + #endif + + #if defined(TCCR0A) && defined(COM0B1) + case TIMER0B: + // connect pwm to pin on timer 0, channel B + sbi(TCCR0A, COM0B1); + OCR0B = val; // set pwm duty + break; + #endif + + #if defined(TCCR1A) && defined(COM1A1) + case TIMER1A: + // connect pwm to pin on timer 1, channel A + sbi(TCCR1A, COM1A1); + OCR1A = val; // set pwm duty + break; + #endif + + #if defined(TCCR1A) && defined(COM1B1) + case TIMER1B: + // connect pwm to pin on timer 1, channel B + sbi(TCCR1A, COM1B1); + OCR1B = val; // set pwm duty + break; + #endif + + #if defined(TCCR2) && defined(COM21) + case TIMER2: + // connect pwm to pin on timer 2 + sbi(TCCR2, COM21); + OCR2 = val; // set pwm duty + break; + #endif + + #if defined(TCCR2A) && defined(COM2A1) + case TIMER2A: + // connect pwm to pin on timer 2, channel A + sbi(TCCR2A, COM2A1); + OCR2A = val; // set pwm duty + break; + #endif + + #if defined(TCCR2A) && defined(COM2B1) + case TIMER2B: + // connect pwm to pin on timer 2, channel B + sbi(TCCR2A, COM2B1); + OCR2B = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3A1) + case TIMER3A: + // connect pwm to pin on timer 3, channel A + sbi(TCCR3A, COM3A1); + OCR3A = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3B1) + case TIMER3B: + // connect pwm to pin on timer 3, channel B + sbi(TCCR3A, COM3B1); + OCR3B = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3C1) + case TIMER3C: + // connect pwm to pin on timer 3, channel C + sbi(TCCR3A, COM3C1); + OCR3C = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4A1) + case TIMER4A: + // connect pwm to pin on timer 4, channel A + sbi(TCCR4A, COM4A1); + OCR4A = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4B1) + case TIMER4B: + // connect pwm to pin on timer 4, channel B + sbi(TCCR4A, COM4B1); + OCR4B = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4C1) + case TIMER4C: + // connect pwm to pin on timer 4, channel C + sbi(TCCR4A, COM4C1); + OCR4C = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5A1) + case TIMER5A: + // connect pwm to pin on timer 5, channel A + sbi(TCCR5A, COM5A1); + OCR5A = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5B1) + case TIMER5B: + // connect pwm to pin on timer 5, channel B + sbi(TCCR5A, COM5B1); + OCR5B = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5C1) + case TIMER5C: + // connect pwm to pin on timer 5, channel C + sbi(TCCR5A, COM5C1); + OCR5C = val; // set pwm duty + break; + #endif + + case NOT_ON_TIMER: + default: + if (val < 128) { + digitalWrite(pin, LOW); + } else { + digitalWrite(pin, HIGH); + } + } + } +} diff --git a/Marlin/Marlin/Sanguino/cores/arduino/wiring_digital.c b/Marlin/Marlin/Sanguino/cores/arduino/wiring_digital.c new file mode 100644 index 0000000000..0949da42d7 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/wiring_digital.c @@ -0,0 +1,166 @@ +/* + wiring_digital.c - digital input and output functions + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 28 September 2010 by Mark Sproul + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +void pinMode(uint8_t pin, uint8_t mode) +{ + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *reg; + + if (port == NOT_A_PIN) return; + + // JWS: can I let the optimizer do this? + reg = portModeRegister(port); + + if (mode == INPUT) { + uint8_t oldSREG = SREG; + cli(); + *reg &= ~bit; + SREG = oldSREG; + } else { + uint8_t oldSREG = SREG; + cli(); + *reg |= bit; + SREG = oldSREG; + } +} + +// Forcing this inline keeps the callers from having to push their own stuff +// on the stack. It is a good performance win and only takes 1 more byte per +// user than calling. (It will take more bytes on the 168.) +// +// But shouldn't this be moved into pinMode? Seems silly to check and do on +// each digitalread or write. +// +// Mark Sproul: +// - Removed inline. Save 170 bytes on atmega1280 +// - changed to a switch statment; added 32 bytes but much easier to read and maintain. +// - Added more #ifdefs, now compiles for atmega645 +// +//static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline)); +//static inline void turnOffPWM(uint8_t timer) +static void turnOffPWM(uint8_t timer) +{ + switch (timer) + { + #if defined(TCCR1A) && defined(COM1A1) + case TIMER1A: cbi(TCCR1A, COM1A1); break; + #endif + #if defined(TCCR1A) && defined(COM1B1) + case TIMER1B: cbi(TCCR1A, COM1B1); break; + #endif + + #if defined(TCCR2) && defined(COM21) + case TIMER2: cbi(TCCR2, COM21); break; + #endif + + #if defined(TCCR0A) && defined(COM0A1) + case TIMER0A: cbi(TCCR0A, COM0A1); break; + #endif + + #if defined(TIMER0B) && defined(COM0B1) + case TIMER0B: cbi(TCCR0A, COM0B1); break; + #endif + #if defined(TCCR2A) && defined(COM2A1) + case TIMER2A: cbi(TCCR2A, COM2A1); break; + #endif + #if defined(TCCR2A) && defined(COM2B1) + case TIMER2B: cbi(TCCR2A, COM2B1); break; + #endif + + #if defined(TCCR3A) && defined(COM3A1) + case TIMER3A: cbi(TCCR3A, COM3A1); break; + #endif + #if defined(TCCR3A) && defined(COM3B1) + case TIMER3B: cbi(TCCR3A, COM3B1); break; + #endif + #if defined(TCCR3A) && defined(COM3C1) + case TIMER3C: cbi(TCCR3A, COM3C1); break; + #endif + + #if defined(TCCR4A) && defined(COM4A1) + case TIMER4A: cbi(TCCR4A, COM4A1); break; + #endif + #if defined(TCCR4A) && defined(COM4B1) + case TIMER4B: cbi(TCCR4A, COM4B1); break; + #endif + #if defined(TCCR4A) && defined(COM4C1) + case TIMER4C: cbi(TCCR4A, COM4C1); break; + #endif + #if defined(TCCR5A) + case TIMER5A: cbi(TCCR5A, COM5A1); break; + case TIMER5B: cbi(TCCR5A, COM5B1); break; + case TIMER5C: cbi(TCCR5A, COM5C1); break; + #endif + } +} + +void digitalWrite(uint8_t pin, uint8_t val) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *out; + + if (port == NOT_A_PIN) return; + + // If the pin that support PWM output, we need to turn it off + // before doing a digital write. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + out = portOutputRegister(port); + + if (val == LOW) { + uint8_t oldSREG = SREG; + cli(); + *out &= ~bit; + SREG = oldSREG; + } else { + uint8_t oldSREG = SREG; + cli(); + *out |= bit; + SREG = oldSREG; + } +} + +int digitalRead(uint8_t pin) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + + if (port == NOT_A_PIN) return LOW; + + // If the pin that support PWM output, we need to turn it off + // before getting a digital reading. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + if (*portInputRegister(port) & bit) return HIGH; + return LOW; +} diff --git a/Marlin/Marlin/Sanguino/cores/arduino/wiring_private.h b/Marlin/Marlin/Sanguino/cores/arduino/wiring_private.h new file mode 100644 index 0000000000..7449c76ac3 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/wiring_private.h @@ -0,0 +1,68 @@ +/* + wiring_private.h - Internal header file. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $ +*/ + +#ifndef WiringPrivate_h +#define WiringPrivate_h +#include +#include +#include +#include +#include +#include + +#include "wiring.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +#define EXTERNAL_INT_0 0 +#define EXTERNAL_INT_1 1 +#define EXTERNAL_INT_2 2 +#define EXTERNAL_INT_3 3 +#define EXTERNAL_INT_4 4 +#define EXTERNAL_INT_5 5 +#define EXTERNAL_INT_6 6 +#define EXTERNAL_INT_7 7 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define EXTERNAL_NUM_INTERRUPTS 8 +#else +#define EXTERNAL_NUM_INTERRUPTS 2 +#endif + +typedef void (*voidFuncPtr)(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/Marlin/Sanguino/cores/arduino/wiring_pulse.c b/Marlin/Marlin/Sanguino/cores/arduino/wiring_pulse.c new file mode 100644 index 0000000000..0d968865d2 --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/wiring_pulse.c @@ -0,0 +1,69 @@ +/* + wiring_pulse.c - pulseIn() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH + * or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds + * to 3 minutes in length, but must be called at least a few dozen microseconds + * before the start of the pulse. */ +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout) +{ + // cache the port and bit of the pin in order to speed up the + // pulse width measuring loop and achieve finer resolution. calling + // digitalRead() instead yields much coarser resolution. + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + uint8_t stateMask = (state ? bit : 0); + unsigned long width = 0; // keep initialization out of time critical area + + // convert the timeout from microseconds to a number of times through + // the initial loop; it takes 16 clock cycles per iteration. + unsigned long numloops = 0; + unsigned long maxloops = microsecondsToClockCycles(timeout) / 16; + + // wait for any previous pulse to end + while ((*portInputRegister(port) & bit) == stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to start + while ((*portInputRegister(port) & bit) != stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to stop + while ((*portInputRegister(port) & bit) == stateMask) { + if (numloops++ == maxloops) + return 0; + width++; + } + + // convert the reading to microseconds. The loop has been determined + // to be 20 clock cycles long and have about 16 clocks between the edge + // and the start of the loop. There will be some error introduced by + // the interrupt handlers. + return clockCyclesToMicroseconds(width * 21 + 16); +} diff --git a/Marlin/Marlin/Sanguino/cores/arduino/wiring_shift.c b/Marlin/Marlin/Sanguino/cores/arduino/wiring_shift.c new file mode 100644 index 0000000000..cfe786758c --- /dev/null +++ b/Marlin/Marlin/Sanguino/cores/arduino/wiring_shift.c @@ -0,0 +1,55 @@ +/* + wiring_shift.c - shiftOut() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" + +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder) { + uint8_t value = 0; + uint8_t i; + + for (i = 0; i < 8; ++i) { + digitalWrite(clockPin, HIGH); + if (bitOrder == LSBFIRST) + value |= digitalRead(dataPin) << i; + else + value |= digitalRead(dataPin) << (7 - i); + digitalWrite(clockPin, LOW); + } + return value; +} + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val) +{ + uint8_t i; + + for (i = 0; i < 8; i++) { + if (bitOrder == LSBFIRST) + digitalWrite(dataPin, !!(val & (1 << i))); + else + digitalWrite(dataPin, !!(val & (1 << (7 - i)))); + + digitalWrite(clockPin, HIGH); + digitalWrite(clockPin, LOW); + } +} diff --git a/Marlin/Marlin/Sanguino/programmers.txt b/Marlin/Marlin/Sanguino/programmers.txt new file mode 100644 index 0000000000..466f602a3c --- /dev/null +++ b/Marlin/Marlin/Sanguino/programmers.txt @@ -0,0 +1,20 @@ +avrisp.name=AVR ISP +avrisp.communication=serial +avrisp.protocol=stk500v1 + +avrispmkii.name=AVRISP mkII +avrispmkii.communication=usb +avrispmkii.protocol=stk500v2 + +usbtinyisp.name=USBtinyISP +usbtinyisp.protocol=usbtiny + +parallel.name=Parallel Programmer +parallel.protocol=dapa +parallel.force=true +# parallel.delay=200 + +arduinoisp.name=Arduino as ISP +arduinoisp.communication=serial +arduinoisp.protocol=stk500v1 +arduinoisp.speed=19200 diff --git a/Marlin/Marlin/Sd2Card.cpp b/Marlin/Marlin/Sd2Card.cpp new file mode 100644 index 0000000000..eb38df6b72 --- /dev/null +++ b/Marlin/Marlin/Sd2Card.cpp @@ -0,0 +1,641 @@ +/* Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino Sd2Card Library. If not, see + * . + */ +#include "Marlin.h" + +#ifdef SDSUPPORT +#include "Sd2Card.h" +//------------------------------------------------------------------------------ +#ifndef SOFTWARE_SPI +// functions for hardware SPI +//------------------------------------------------------------------------------ +// make sure SPCR rate is in expected bits +#if (SPR0 != 0 || SPR1 != 1) +#error unexpected SPCR bits +#endif +/** + * Initialize hardware SPI + * Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6] + */ +static void spiInit(uint8_t spiRate) { + // See avr processor documentation + SPCR = (1 << SPE) | (1 << MSTR) | (spiRate >> 1); + SPSR = spiRate & 1 || spiRate == 6 ? 0 : 1 << SPI2X; +} +//------------------------------------------------------------------------------ +/** SPI receive a byte */ +static uint8_t spiRec() { + SPDR = 0XFF; + while (!(SPSR & (1 << SPIF))); + return SPDR; +} +//------------------------------------------------------------------------------ +/** SPI read data - only one call so force inline */ +static inline __attribute__((always_inline)) + void spiRead(uint8_t* buf, uint16_t nbyte) { + if (nbyte-- == 0) return; + SPDR = 0XFF; + for (uint16_t i = 0; i < nbyte; i++) { + while (!(SPSR & (1 << SPIF))); + buf[i] = SPDR; + SPDR = 0XFF; + } + while (!(SPSR & (1 << SPIF))); + buf[nbyte] = SPDR; +} +//------------------------------------------------------------------------------ +/** SPI send a byte */ +static void spiSend(uint8_t b) { + SPDR = b; + while (!(SPSR & (1 << SPIF))); +} +//------------------------------------------------------------------------------ +/** SPI send block - only one call so force inline */ +static inline __attribute__((always_inline)) + void spiSendBlock(uint8_t token, const uint8_t* buf) { + SPDR = token; + for (uint16_t i = 0; i < 512; i += 2) { + while (!(SPSR & (1 << SPIF))); + SPDR = buf[i]; + while (!(SPSR & (1 << SPIF))); + SPDR = buf[i + 1]; + } + while (!(SPSR & (1 << SPIF))); +} +//------------------------------------------------------------------------------ +#else // SOFTWARE_SPI +//------------------------------------------------------------------------------ +/** nop to tune soft SPI timing */ +#define nop asm volatile ("nop\n\t") +//------------------------------------------------------------------------------ +/** Soft SPI receive byte */ +static uint8_t spiRec() { + uint8_t data = 0; + // no interrupts during byte receive - about 8 us + cli(); + // output pin high - like sending 0XFF + fastDigitalWrite(SPI_MOSI_PIN, HIGH); + + for (uint8_t i = 0; i < 8; i++) { + fastDigitalWrite(SPI_SCK_PIN, HIGH); + + // adjust so SCK is nice + nop; + nop; + + data <<= 1; + + if (fastDigitalRead(SPI_MISO_PIN)) data |= 1; + + fastDigitalWrite(SPI_SCK_PIN, LOW); + } + // enable interrupts + sei(); + return data; +} +//------------------------------------------------------------------------------ +/** Soft SPI read data */ +static void spiRead(uint8_t* buf, uint16_t nbyte) { + for (uint16_t i = 0; i < nbyte; i++) { + buf[i] = spiRec(); + } +} +//------------------------------------------------------------------------------ +/** Soft SPI send byte */ +static void spiSend(uint8_t data) { + // no interrupts during byte send - about 8 us + cli(); + for (uint8_t i = 0; i < 8; i++) { + fastDigitalWrite(SPI_SCK_PIN, LOW); + + fastDigitalWrite(SPI_MOSI_PIN, data & 0X80); + + data <<= 1; + + fastDigitalWrite(SPI_SCK_PIN, HIGH); + } + // hold SCK high for a few ns + nop; + nop; + nop; + nop; + + fastDigitalWrite(SPI_SCK_PIN, LOW); + // enable interrupts + sei(); +} +//------------------------------------------------------------------------------ +/** Soft SPI send block */ + void spiSendBlock(uint8_t token, const uint8_t* buf) { + spiSend(token); + for (uint16_t i = 0; i < 512; i++) { + spiSend(buf[i]); + } +} +#endif // SOFTWARE_SPI +//------------------------------------------------------------------------------ +// send command and return error code. Return zero for OK +uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) { + // select card + chipSelectLow(); + + // wait up to 300 ms if busy + waitNotBusy(300); + + // send command + spiSend(cmd | 0x40); + + // send argument + for (int8_t s = 24; s >= 0; s -= 8) spiSend(arg >> s); + + // send CRC + uint8_t crc = 0XFF; + if (cmd == CMD0) crc = 0X95; // correct crc for CMD0 with arg 0 + if (cmd == CMD8) crc = 0X87; // correct crc for CMD8 with arg 0X1AA + spiSend(crc); + + // skip stuff byte for stop read + if (cmd == CMD12) spiRec(); + + // wait for response + for (uint8_t i = 0; ((status_ = spiRec()) & 0X80) && i != 0XFF; i++); + return status_; +} +//------------------------------------------------------------------------------ +/** + * Determine the size of an SD flash memory card. + * + * \return The number of 512 byte data blocks in the card + * or zero if an error occurs. + */ +uint32_t Sd2Card::cardSize() { + csd_t csd; + if (!readCSD(&csd)) return 0; + if (csd.v1.csd_ver == 0) { + uint8_t read_bl_len = csd.v1.read_bl_len; + uint16_t c_size = (csd.v1.c_size_high << 10) + | (csd.v1.c_size_mid << 2) | csd.v1.c_size_low; + uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1) + | csd.v1.c_size_mult_low; + return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7); + } else if (csd.v2.csd_ver == 1) { + uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16) + | (csd.v2.c_size_mid << 8) | csd.v2.c_size_low; + return (c_size + 1) << 10; + } else { + error(SD_CARD_ERROR_BAD_CSD); + return 0; + } +} +//------------------------------------------------------------------------------ +void Sd2Card::chipSelectHigh() { + digitalWrite(chipSelectPin_, HIGH); +} +//------------------------------------------------------------------------------ +void Sd2Card::chipSelectLow() { +#ifndef SOFTWARE_SPI + spiInit(spiRate_); +#endif // SOFTWARE_SPI + digitalWrite(chipSelectPin_, LOW); +} +//------------------------------------------------------------------------------ +/** Erase a range of blocks. + * + * \param[in] firstBlock The address of the first block in the range. + * \param[in] lastBlock The address of the last block in the range. + * + * \note This function requests the SD card to do a flash erase for a + * range of blocks. The data on the card after an erase operation is + * either 0 or 1, depends on the card vendor. The card must support + * single block erase. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) { + csd_t csd; + if (!readCSD(&csd)) goto fail; + // check for single block erase + if (!csd.v1.erase_blk_en) { + // erase size mask + uint8_t m = (csd.v1.sector_size_high << 1) | csd.v1.sector_size_low; + if ((firstBlock & m) != 0 || ((lastBlock + 1) & m) != 0) { + // error card can't erase specified area + error(SD_CARD_ERROR_ERASE_SINGLE_BLOCK); + goto fail; + } + } + if (type_ != SD_CARD_TYPE_SDHC) { + firstBlock <<= 9; + lastBlock <<= 9; + } + if (cardCommand(CMD32, firstBlock) + || cardCommand(CMD33, lastBlock) + || cardCommand(CMD38, 0)) { + error(SD_CARD_ERROR_ERASE); + goto fail; + } + if (!waitNotBusy(SD_ERASE_TIMEOUT)) { + error(SD_CARD_ERROR_ERASE_TIMEOUT); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Determine if card supports single block erase. + * + * \return The value one, true, is returned if single block erase is supported. + * The value zero, false, is returned if single block erase is not supported. + */ +bool Sd2Card::eraseSingleBlockEnable() { + csd_t csd; + return readCSD(&csd) ? csd.v1.erase_blk_en : false; +} +//------------------------------------------------------------------------------ +/** + * Initialize an SD flash memory card. + * + * \param[in] sckRateID SPI clock rate selector. See setSckRate(). + * \param[in] chipSelectPin SD chip select pin number. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. The reason for failure + * can be determined by calling errorCode() and errorData(). + */ +bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) { + errorCode_ = type_ = 0; + chipSelectPin_ = chipSelectPin; + // 16-bit init start time allows over a minute + uint16_t t0 = (uint16_t)millis(); + uint32_t arg; + + // set pin modes + pinMode(chipSelectPin_, OUTPUT); + chipSelectHigh(); + pinMode(SPI_MISO_PIN, INPUT); + pinMode(SPI_MOSI_PIN, OUTPUT); + pinMode(SPI_SCK_PIN, OUTPUT); + +#ifndef SOFTWARE_SPI + // SS must be in output mode even it is not chip select + pinMode(SS_PIN, OUTPUT); + // set SS high - may be chip select for another SPI device +#if SET_SPI_SS_HIGH + digitalWrite(SS_PIN, HIGH); +#endif // SET_SPI_SS_HIGH + // set SCK rate for initialization commands + spiRate_ = SPI_SD_INIT_RATE; + spiInit(spiRate_); +#endif // SOFTWARE_SPI + + // must supply min of 74 clock cycles with CS high. + for (uint8_t i = 0; i < 10; i++) spiSend(0XFF); + + // command to go idle in SPI mode + while ((status_ = cardCommand(CMD0, 0)) != R1_IDLE_STATE) { + if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) { + error(SD_CARD_ERROR_CMD0); + goto fail; + } + } + // check SD version + if ((cardCommand(CMD8, 0x1AA) & R1_ILLEGAL_COMMAND)) { + type(SD_CARD_TYPE_SD1); + } else { + // only need last byte of r7 response + for (uint8_t i = 0; i < 4; i++) status_ = spiRec(); + if (status_ != 0XAA) { + error(SD_CARD_ERROR_CMD8); + goto fail; + } + type(SD_CARD_TYPE_SD2); + } + // initialize card and send host supports SDHC if SD2 + arg = type() == SD_CARD_TYPE_SD2 ? 0X40000000 : 0; + + while ((status_ = cardAcmd(ACMD41, arg)) != R1_READY_STATE) { + // check for timeout + if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) { + error(SD_CARD_ERROR_ACMD41); + goto fail; + } + } + // if SD2 read OCR register to check for SDHC card + if (type() == SD_CARD_TYPE_SD2) { + if (cardCommand(CMD58, 0)) { + error(SD_CARD_ERROR_CMD58); + goto fail; + } + if ((spiRec() & 0XC0) == 0XC0) type(SD_CARD_TYPE_SDHC); + // discard rest of ocr - contains allowed voltage range + for (uint8_t i = 0; i < 3; i++) spiRec(); + } + chipSelectHigh(); + +#ifndef SOFTWARE_SPI + return setSckRate(sckRateID); +#else // SOFTWARE_SPI + return true; +#endif // SOFTWARE_SPI + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** + * Read a 512 byte block from an SD card. + * + * \param[in] blockNumber Logical block to be read. + * \param[out] dst Pointer to the location that will receive the data. + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) { + // use address if not SDHC card + if (type()!= SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD17, blockNumber)) { + error(SD_CARD_ERROR_CMD17); + goto fail; + } + return readData(dst, 512); + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Read one data block in a multiple block read sequence + * + * \param[in] dst Pointer to the location for the data to be read. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::readData(uint8_t *dst) { + chipSelectLow(); + return readData(dst, 512); +} +//------------------------------------------------------------------------------ +bool Sd2Card::readData(uint8_t* dst, uint16_t count) { + // wait for start block token + uint16_t t0 = millis(); + while ((status_ = spiRec()) == 0XFF) { + if (((uint16_t)millis() - t0) > SD_READ_TIMEOUT) { + error(SD_CARD_ERROR_READ_TIMEOUT); + goto fail; + } + } + if (status_ != DATA_START_BLOCK) { + error(SD_CARD_ERROR_READ); + goto fail; + } + // transfer data + spiRead(dst, count); + + // discard CRC + spiRec(); + spiRec(); + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** read CID or CSR register */ +bool Sd2Card::readRegister(uint8_t cmd, void* buf) { + uint8_t* dst = reinterpret_cast(buf); + if (cardCommand(cmd, 0)) { + error(SD_CARD_ERROR_READ_REG); + goto fail; + } + return readData(dst, 16); + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Start a read multiple blocks sequence. + * + * \param[in] blockNumber Address of first block in sequence. + * + * \note This function is used with readData() and readStop() for optimized + * multiple block reads. SPI chipSelect must be low for the entire sequence. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::readStart(uint32_t blockNumber) { + if (type()!= SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD18, blockNumber)) { + error(SD_CARD_ERROR_CMD18); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** End a read multiple blocks sequence. + * +* \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::readStop() { + chipSelectLow(); + if (cardCommand(CMD12, 0)) { + error(SD_CARD_ERROR_CMD12); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** + * Set the SPI clock rate. + * + * \param[in] sckRateID A value in the range [0, 6]. + * + * The SPI clock will be set to F_CPU/pow(2, 1 + sckRateID). The maximum + * SPI rate is F_CPU/2 for \a sckRateID = 0 and the minimum rate is F_CPU/128 + * for \a scsRateID = 6. + * + * \return The value one, true, is returned for success and the value zero, + * false, is returned for an invalid value of \a sckRateID. + */ +bool Sd2Card::setSckRate(uint8_t sckRateID) { + if (sckRateID > 6) { + error(SD_CARD_ERROR_SCK_RATE); + return false; + } + spiRate_ = sckRateID; + return true; +} +//------------------------------------------------------------------------------ +// wait for card to go not busy +bool Sd2Card::waitNotBusy(uint16_t timeoutMillis) { + uint16_t t0 = millis(); + while (spiRec() != 0XFF) { + if (((uint16_t)millis() - t0) >= timeoutMillis) goto fail; + } + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** + * Writes a 512 byte block to an SD card. + * + * \param[in] blockNumber Logical block to be written. + * \param[in] src Pointer to the location of the data to be written. + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) { + // use address if not SDHC card + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD24, blockNumber)) { + error(SD_CARD_ERROR_CMD24); + goto fail; + } + if (!writeData(DATA_START_BLOCK, src)) goto fail; + + // wait for flash programming to complete + if (!waitNotBusy(SD_WRITE_TIMEOUT)) { + error(SD_CARD_ERROR_WRITE_TIMEOUT); + goto fail; + } + // response is r2 so get and check two bytes for nonzero + if (cardCommand(CMD13, 0) || spiRec()) { + error(SD_CARD_ERROR_WRITE_PROGRAMMING); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Write one data block in a multiple block write sequence + * \param[in] src Pointer to the location of the data to be written. + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::writeData(const uint8_t* src) { + chipSelectLow(); + // wait for previous write to finish + if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; + if (!writeData(WRITE_MULTIPLE_TOKEN, src)) goto fail; + chipSelectHigh(); + return true; + + fail: + error(SD_CARD_ERROR_WRITE_MULTIPLE); + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +// send one block of data for write block or write multiple blocks +bool Sd2Card::writeData(uint8_t token, const uint8_t* src) { + spiSendBlock(token, src); + + spiSend(0xff); // dummy crc + spiSend(0xff); // dummy crc + + status_ = spiRec(); + if ((status_ & DATA_RES_MASK) != DATA_RES_ACCEPTED) { + error(SD_CARD_ERROR_WRITE); + goto fail; + } + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** Start a write multiple blocks sequence. + * + * \param[in] blockNumber Address of first block in sequence. + * \param[in] eraseCount The number of blocks to be pre-erased. + * + * \note This function is used with writeData() and writeStop() + * for optimized multiple block writes. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) { + // send pre-erase count + if (cardAcmd(ACMD23, eraseCount)) { + error(SD_CARD_ERROR_ACMD23); + goto fail; + } + // use address if not SDHC card + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD25, blockNumber)) { + error(SD_CARD_ERROR_CMD25); + goto fail; + } + chipSelectHigh(); + return true; + + fail: + chipSelectHigh(); + return false; +} +//------------------------------------------------------------------------------ +/** End a write multiple blocks sequence. + * +* \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool Sd2Card::writeStop() { + chipSelectLow(); + if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; + spiSend(STOP_TRAN_TOKEN); + if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto fail; + chipSelectHigh(); + return true; + + fail: + error(SD_CARD_ERROR_STOP_TRAN); + chipSelectHigh(); + return false; +} + +#endif diff --git a/Marlin/Marlin/Sd2Card.h b/Marlin/Marlin/Sd2Card.h new file mode 100644 index 0000000000..7de5f11bcc --- /dev/null +++ b/Marlin/Marlin/Sd2Card.h @@ -0,0 +1,241 @@ +/* Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino Sd2Card Library. If not, see + * . + */ + +#include "Marlin.h" +#ifdef SDSUPPORT + +#ifndef Sd2Card_h +#define Sd2Card_h +/** + * \file + * \brief Sd2Card class for V2 SD/SDHC cards + */ +#include "SdFatConfig.h" +#include "Sd2PinMap.h" +#include "SdInfo.h" +//------------------------------------------------------------------------------ +// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6 +/** Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). */ +uint8_t const SPI_FULL_SPEED = 0; +/** Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). */ +uint8_t const SPI_HALF_SPEED = 1; +/** Set SCK rate to F_CPU/8. See Sd2Card::setSckRate(). */ +uint8_t const SPI_QUARTER_SPEED = 2; +/** Set SCK rate to F_CPU/16. See Sd2Card::setSckRate(). */ +uint8_t const SPI_EIGHTH_SPEED = 3; +/** Set SCK rate to F_CPU/32. See Sd2Card::setSckRate(). */ +uint8_t const SPI_SIXTEENTH_SPEED = 4; +//------------------------------------------------------------------------------ +/** init timeout ms */ +uint16_t const SD_INIT_TIMEOUT = 2000; +/** erase timeout ms */ +uint16_t const SD_ERASE_TIMEOUT = 10000; +/** read timeout ms */ +uint16_t const SD_READ_TIMEOUT = 300; +/** write time out ms */ +uint16_t const SD_WRITE_TIMEOUT = 600; +//------------------------------------------------------------------------------ +// SD card errors +/** timeout error for command CMD0 (initialize card in SPI mode) */ +uint8_t const SD_CARD_ERROR_CMD0 = 0X1; +/** CMD8 was not accepted - not a valid SD card*/ +uint8_t const SD_CARD_ERROR_CMD8 = 0X2; +/** card returned an error response for CMD12 (write stop) */ +uint8_t const SD_CARD_ERROR_CMD12 = 0X3; +/** card returned an error response for CMD17 (read block) */ +uint8_t const SD_CARD_ERROR_CMD17 = 0X4; +/** card returned an error response for CMD18 (read multiple block) */ +uint8_t const SD_CARD_ERROR_CMD18 = 0X5; +/** card returned an error response for CMD24 (write block) */ +uint8_t const SD_CARD_ERROR_CMD24 = 0X6; +/** WRITE_MULTIPLE_BLOCKS command failed */ +uint8_t const SD_CARD_ERROR_CMD25 = 0X7; +/** card returned an error response for CMD58 (read OCR) */ +uint8_t const SD_CARD_ERROR_CMD58 = 0X8; +/** SET_WR_BLK_ERASE_COUNT failed */ +uint8_t const SD_CARD_ERROR_ACMD23 = 0X9; +/** ACMD41 initialization process timeout */ +uint8_t const SD_CARD_ERROR_ACMD41 = 0XA; +/** card returned a bad CSR version field */ +uint8_t const SD_CARD_ERROR_BAD_CSD = 0XB; +/** erase block group command failed */ +uint8_t const SD_CARD_ERROR_ERASE = 0XC; +/** card not capable of single block erase */ +uint8_t const SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0XD; +/** Erase sequence timed out */ +uint8_t const SD_CARD_ERROR_ERASE_TIMEOUT = 0XE; +/** card returned an error token instead of read data */ +uint8_t const SD_CARD_ERROR_READ = 0XF; +/** read CID or CSD failed */ +uint8_t const SD_CARD_ERROR_READ_REG = 0X10; +/** timeout while waiting for start of read data */ +uint8_t const SD_CARD_ERROR_READ_TIMEOUT = 0X11; +/** card did not accept STOP_TRAN_TOKEN */ +uint8_t const SD_CARD_ERROR_STOP_TRAN = 0X12; +/** card returned an error token as a response to a write operation */ +uint8_t const SD_CARD_ERROR_WRITE = 0X13; +/** attempt to write protected block zero */ +uint8_t const SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0X14; // REMOVE - not used +/** card did not go ready for a multiple block write */ +uint8_t const SD_CARD_ERROR_WRITE_MULTIPLE = 0X15; +/** card returned an error to a CMD13 status check after a write */ +uint8_t const SD_CARD_ERROR_WRITE_PROGRAMMING = 0X16; +/** timeout occurred during write programming */ +uint8_t const SD_CARD_ERROR_WRITE_TIMEOUT = 0X17; +/** incorrect rate selected */ +uint8_t const SD_CARD_ERROR_SCK_RATE = 0X18; +/** init() not called */ +uint8_t const SD_CARD_ERROR_INIT_NOT_CALLED = 0X19; +//------------------------------------------------------------------------------ +// card types +/** Standard capacity V1 SD card */ +uint8_t const SD_CARD_TYPE_SD1 = 1; +/** Standard capacity V2 SD card */ +uint8_t const SD_CARD_TYPE_SD2 = 2; +/** High Capacity SD card */ +uint8_t const SD_CARD_TYPE_SDHC = 3; +/** + * define SOFTWARE_SPI to use bit-bang SPI + */ +//------------------------------------------------------------------------------ +#if MEGA_SOFT_SPI && (defined(__AVR_ATmega1280__)||defined(__AVR_ATmega2560__)) +#define SOFTWARE_SPI +#elif USE_SOFTWARE_SPI +#define SOFTWARE_SPI +#endif // MEGA_SOFT_SPI +//------------------------------------------------------------------------------ +// SPI pin definitions - do not edit here - change in SdFatConfig.h +// +#ifndef SOFTWARE_SPI +// hardware pin defs +/** The default chip select pin for the SD card is SS. */ +uint8_t const SD_CHIP_SELECT_PIN = SS_PIN; +// The following three pins must not be redefined for hardware SPI. +/** SPI Master Out Slave In pin */ +uint8_t const SPI_MOSI_PIN = MOSI_PIN; +/** SPI Master In Slave Out pin */ +uint8_t const SPI_MISO_PIN = MISO_PIN; +/** SPI Clock pin */ +uint8_t const SPI_SCK_PIN = SCK_PIN; + +#else // SOFTWARE_SPI + +/** SPI chip select pin */ +uint8_t const SD_CHIP_SELECT_PIN = SOFT_SPI_CS_PIN; +/** SPI Master Out Slave In pin */ +uint8_t const SPI_MOSI_PIN = SOFT_SPI_MOSI_PIN; +/** SPI Master In Slave Out pin */ +uint8_t const SPI_MISO_PIN = SOFT_SPI_MISO_PIN; +/** SPI Clock pin */ +uint8_t const SPI_SCK_PIN = SOFT_SPI_SCK_PIN; +#endif // SOFTWARE_SPI +//------------------------------------------------------------------------------ +/** + * \class Sd2Card + * \brief Raw access to SD and SDHC flash memory cards. + */ +class Sd2Card { + public: + /** Construct an instance of Sd2Card. */ + Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {} + uint32_t cardSize(); + bool erase(uint32_t firstBlock, uint32_t lastBlock); + bool eraseSingleBlockEnable(); + /** + * Set SD error code. + * \param[in] code value for error code. + */ + void error(uint8_t code) {errorCode_ = code;} + /** + * \return error code for last error. See Sd2Card.h for a list of error codes. + */ + int errorCode() const {return errorCode_;} + /** \return error data for last error. */ + int errorData() const {return status_;} + /** + * Initialize an SD flash memory card with default clock rate and chip + * select pin. See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin). + * + * \return true for success or false for failure. + */ + bool init(uint8_t sckRateID = SPI_FULL_SPEED, + uint8_t chipSelectPin = SD_CHIP_SELECT_PIN); + bool readBlock(uint32_t block, uint8_t* dst); + /** + * Read a card's CID register. The CID contains card identification + * information such as Manufacturer ID, Product name, Product serial + * number and Manufacturing date. + * + * \param[out] cid pointer to area for returned data. + * + * \return true for success or false for failure. + */ + bool readCID(cid_t* cid) { + return readRegister(CMD10, cid); + } + /** + * Read a card's CSD register. The CSD contains Card-Specific Data that + * provides information regarding access to the card's contents. + * + * \param[out] csd pointer to area for returned data. + * + * \return true for success or false for failure. + */ + bool readCSD(csd_t* csd) { + return readRegister(CMD9, csd); + } + bool readData(uint8_t *dst); + bool readStart(uint32_t blockNumber); + bool readStop(); + bool setSckRate(uint8_t sckRateID); + /** Return the card type: SD V1, SD V2 or SDHC + * \return 0 - SD V1, 1 - SD V2, or 3 - SDHC. + */ + int type() const {return type_;} + bool writeBlock(uint32_t blockNumber, const uint8_t* src); + bool writeData(const uint8_t* src); + bool writeStart(uint32_t blockNumber, uint32_t eraseCount); + bool writeStop(); + private: + //---------------------------------------------------------------------------- + uint8_t chipSelectPin_; + uint8_t errorCode_; + uint8_t spiRate_; + uint8_t status_; + uint8_t type_; + // private functions + uint8_t cardAcmd(uint8_t cmd, uint32_t arg) { + cardCommand(CMD55, 0); + return cardCommand(cmd, arg); + } + uint8_t cardCommand(uint8_t cmd, uint32_t arg); + + bool readData(uint8_t* dst, uint16_t count); + bool readRegister(uint8_t cmd, void* buf); + void chipSelectHigh(); + void chipSelectLow(); + void type(uint8_t value) {type_ = value;} + bool waitNotBusy(uint16_t timeoutMillis); + bool writeData(uint8_t token, const uint8_t* src); +}; +#endif // Sd2Card_h + + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/Sd2PinMap.h b/Marlin/Marlin/Sd2PinMap.h new file mode 100644 index 0000000000..a40729df2d --- /dev/null +++ b/Marlin/Marlin/Sd2PinMap.h @@ -0,0 +1,368 @@ +/* Arduino SdFat Library + * Copyright (C) 2010 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +// Warning this file was generated by a program. +#include "Marlin.h" +#ifdef SDSUPPORT + +#ifndef Sd2PinMap_h +#define Sd2PinMap_h +#include +//------------------------------------------------------------------------------ +/** struct for mapping digital pins */ +struct pin_map_t { + volatile uint8_t* ddr; + volatile uint8_t* pin; + volatile uint8_t* port; + uint8_t bit; +}; +//------------------------------------------------------------------------------ +#if defined(__AVR_ATmega1280__)\ +|| defined(__AVR_ATmega2560__) +// Mega + +// Two Wire (aka I2C) ports +uint8_t const SDA_PIN = 20; // D1 +uint8_t const SCL_PIN = 21; // D0 + +#undef MOSI_PIN +#undef MISO_PIN +// SPI port +uint8_t const SS_PIN = 53; // B0 +uint8_t const MOSI_PIN = 51; // B2 +uint8_t const MISO_PIN = 50; // B3 +uint8_t const SCK_PIN = 52; // B1 + +static const pin_map_t digitalPinMap[] = { + {&DDRE, &PINE, &PORTE, 0}, // E0 0 + {&DDRE, &PINE, &PORTE, 1}, // E1 1 + {&DDRE, &PINE, &PORTE, 4}, // E4 2 + {&DDRE, &PINE, &PORTE, 5}, // E5 3 + {&DDRG, &PING, &PORTG, 5}, // G5 4 + {&DDRE, &PINE, &PORTE, 3}, // E3 5 + {&DDRH, &PINH, &PORTH, 3}, // H3 6 + {&DDRH, &PINH, &PORTH, 4}, // H4 7 + {&DDRH, &PINH, &PORTH, 5}, // H5 8 + {&DDRH, &PINH, &PORTH, 6}, // H6 9 + {&DDRB, &PINB, &PORTB, 4}, // B4 10 + {&DDRB, &PINB, &PORTB, 5}, // B5 11 + {&DDRB, &PINB, &PORTB, 6}, // B6 12 + {&DDRB, &PINB, &PORTB, 7}, // B7 13 + {&DDRJ, &PINJ, &PORTJ, 1}, // J1 14 + {&DDRJ, &PINJ, &PORTJ, 0}, // J0 15 + {&DDRH, &PINH, &PORTH, 1}, // H1 16 + {&DDRH, &PINH, &PORTH, 0}, // H0 17 + {&DDRD, &PIND, &PORTD, 3}, // D3 18 + {&DDRD, &PIND, &PORTD, 2}, // D2 19 + {&DDRD, &PIND, &PORTD, 1}, // D1 20 + {&DDRD, &PIND, &PORTD, 0}, // D0 21 + {&DDRA, &PINA, &PORTA, 0}, // A0 22 + {&DDRA, &PINA, &PORTA, 1}, // A1 23 + {&DDRA, &PINA, &PORTA, 2}, // A2 24 + {&DDRA, &PINA, &PORTA, 3}, // A3 25 + {&DDRA, &PINA, &PORTA, 4}, // A4 26 + {&DDRA, &PINA, &PORTA, 5}, // A5 27 + {&DDRA, &PINA, &PORTA, 6}, // A6 28 + {&DDRA, &PINA, &PORTA, 7}, // A7 29 + {&DDRC, &PINC, &PORTC, 7}, // C7 30 + {&DDRC, &PINC, &PORTC, 6}, // C6 31 + {&DDRC, &PINC, &PORTC, 5}, // C5 32 + {&DDRC, &PINC, &PORTC, 4}, // C4 33 + {&DDRC, &PINC, &PORTC, 3}, // C3 34 + {&DDRC, &PINC, &PORTC, 2}, // C2 35 + {&DDRC, &PINC, &PORTC, 1}, // C1 36 + {&DDRC, &PINC, &PORTC, 0}, // C0 37 + {&DDRD, &PIND, &PORTD, 7}, // D7 38 + {&DDRG, &PING, &PORTG, 2}, // G2 39 + {&DDRG, &PING, &PORTG, 1}, // G1 40 + {&DDRG, &PING, &PORTG, 0}, // G0 41 + {&DDRL, &PINL, &PORTL, 7}, // L7 42 + {&DDRL, &PINL, &PORTL, 6}, // L6 43 + {&DDRL, &PINL, &PORTL, 5}, // L5 44 + {&DDRL, &PINL, &PORTL, 4}, // L4 45 + {&DDRL, &PINL, &PORTL, 3}, // L3 46 + {&DDRL, &PINL, &PORTL, 2}, // L2 47 + {&DDRL, &PINL, &PORTL, 1}, // L1 48 + {&DDRL, &PINL, &PORTL, 0}, // L0 49 + {&DDRB, &PINB, &PORTB, 3}, // B3 50 + {&DDRB, &PINB, &PORTB, 2}, // B2 51 + {&DDRB, &PINB, &PORTB, 1}, // B1 52 + {&DDRB, &PINB, &PORTB, 0}, // B0 53 + {&DDRF, &PINF, &PORTF, 0}, // F0 54 + {&DDRF, &PINF, &PORTF, 1}, // F1 55 + {&DDRF, &PINF, &PORTF, 2}, // F2 56 + {&DDRF, &PINF, &PORTF, 3}, // F3 57 + {&DDRF, &PINF, &PORTF, 4}, // F4 58 + {&DDRF, &PINF, &PORTF, 5}, // F5 59 + {&DDRF, &PINF, &PORTF, 6}, // F6 60 + {&DDRF, &PINF, &PORTF, 7}, // F7 61 + {&DDRK, &PINK, &PORTK, 0}, // K0 62 + {&DDRK, &PINK, &PORTK, 1}, // K1 63 + {&DDRK, &PINK, &PORTK, 2}, // K2 64 + {&DDRK, &PINK, &PORTK, 3}, // K3 65 + {&DDRK, &PINK, &PORTK, 4}, // K4 66 + {&DDRK, &PINK, &PORTK, 5}, // K5 67 + {&DDRK, &PINK, &PORTK, 6}, // K6 68 + {&DDRK, &PINK, &PORTK, 7} // K7 69 +}; +//------------------------------------------------------------------------------ +#elif defined(__AVR_ATmega644P__)\ +|| defined(__AVR_ATmega644__)\ +|| defined(__AVR_ATmega1284P__) +// Sanguino + +// Two Wire (aka I2C) ports +uint8_t const SDA_PIN = 17; // C1 +uint8_t const SCL_PIN = 18; // C2 + +// SPI port +uint8_t const SS_PIN = 4; // B4 +uint8_t const MOSI_PIN = 5; // B5 +uint8_t const MISO_PIN = 6; // B6 +uint8_t const SCK_PIN = 7; // B7 + +static const pin_map_t digitalPinMap[] = { + {&DDRB, &PINB, &PORTB, 0}, // B0 0 + {&DDRB, &PINB, &PORTB, 1}, // B1 1 + {&DDRB, &PINB, &PORTB, 2}, // B2 2 + {&DDRB, &PINB, &PORTB, 3}, // B3 3 + {&DDRB, &PINB, &PORTB, 4}, // B4 4 + {&DDRB, &PINB, &PORTB, 5}, // B5 5 + {&DDRB, &PINB, &PORTB, 6}, // B6 6 + {&DDRB, &PINB, &PORTB, 7}, // B7 7 + {&DDRD, &PIND, &PORTD, 0}, // D0 8 + {&DDRD, &PIND, &PORTD, 1}, // D1 9 + {&DDRD, &PIND, &PORTD, 2}, // D2 10 + {&DDRD, &PIND, &PORTD, 3}, // D3 11 + {&DDRD, &PIND, &PORTD, 4}, // D4 12 + {&DDRD, &PIND, &PORTD, 5}, // D5 13 + {&DDRD, &PIND, &PORTD, 6}, // D6 14 + {&DDRD, &PIND, &PORTD, 7}, // D7 15 + {&DDRC, &PINC, &PORTC, 0}, // C0 16 + {&DDRC, &PINC, &PORTC, 1}, // C1 17 + {&DDRC, &PINC, &PORTC, 2}, // C2 18 + {&DDRC, &PINC, &PORTC, 3}, // C3 19 + {&DDRC, &PINC, &PORTC, 4}, // C4 20 + {&DDRC, &PINC, &PORTC, 5}, // C5 21 + {&DDRC, &PINC, &PORTC, 6}, // C6 22 + {&DDRC, &PINC, &PORTC, 7}, // C7 23 + {&DDRA, &PINA, &PORTA, 7}, // A7 24 + {&DDRA, &PINA, &PORTA, 6}, // A6 25 + {&DDRA, &PINA, &PORTA, 5}, // A5 26 + {&DDRA, &PINA, &PORTA, 4}, // A4 27 + {&DDRA, &PINA, &PORTA, 3}, // A3 28 + {&DDRA, &PINA, &PORTA, 2}, // A2 29 + {&DDRA, &PINA, &PORTA, 1}, // A1 30 + {&DDRA, &PINA, &PORTA, 0} // A0 31 +}; +//------------------------------------------------------------------------------ +#elif defined(__AVR_ATmega32U4__) +// Teensy 2.0 + +// Two Wire (aka I2C) ports +uint8_t const SDA_PIN = 6; // D1 +uint8_t const SCL_PIN = 5; // D0 + +// SPI port +uint8_t const SS_PIN = 0; // B0 +uint8_t const MOSI_PIN = 2; // B2 +uint8_t const MISO_PIN = 3; // B3 +uint8_t const SCK_PIN = 1; // B1 + +static const pin_map_t digitalPinMap[] = { + {&DDRB, &PINB, &PORTB, 0}, // B0 0 + {&DDRB, &PINB, &PORTB, 1}, // B1 1 + {&DDRB, &PINB, &PORTB, 2}, // B2 2 + {&DDRB, &PINB, &PORTB, 3}, // B3 3 + {&DDRB, &PINB, &PORTB, 7}, // B7 4 + {&DDRD, &PIND, &PORTD, 0}, // D0 5 + {&DDRD, &PIND, &PORTD, 1}, // D1 6 + {&DDRD, &PIND, &PORTD, 2}, // D2 7 + {&DDRD, &PIND, &PORTD, 3}, // D3 8 + {&DDRC, &PINC, &PORTC, 6}, // C6 9 + {&DDRC, &PINC, &PORTC, 7}, // C7 10 + {&DDRD, &PIND, &PORTD, 6}, // D6 11 + {&DDRD, &PIND, &PORTD, 7}, // D7 12 + {&DDRB, &PINB, &PORTB, 4}, // B4 13 + {&DDRB, &PINB, &PORTB, 5}, // B5 14 + {&DDRB, &PINB, &PORTB, 6}, // B6 15 + {&DDRF, &PINF, &PORTF, 7}, // F7 16 + {&DDRF, &PINF, &PORTF, 6}, // F6 17 + {&DDRF, &PINF, &PORTF, 5}, // F5 18 + {&DDRF, &PINF, &PORTF, 4}, // F4 19 + {&DDRF, &PINF, &PORTF, 1}, // F1 20 + {&DDRF, &PINF, &PORTF, 0}, // F0 21 + {&DDRD, &PIND, &PORTD, 4}, // D4 22 + {&DDRD, &PIND, &PORTD, 5}, // D5 23 + {&DDRE, &PINE, &PORTE, 6} // E6 24 +}; +//------------------------------------------------------------------------------ +#elif defined(__AVR_AT90USB646__)\ +|| defined(__AVR_AT90USB1286__) +// Teensy++ 1.0 & 2.0 + +// Two Wire (aka I2C) ports +uint8_t const SDA_PIN = 1; // D1 +uint8_t const SCL_PIN = 0; // D0 + +// SPI port +uint8_t const SS_PIN = 20; // B0 +uint8_t const MOSI_PIN = 22; // B2 +uint8_t const MISO_PIN = 23; // B3 +uint8_t const SCK_PIN = 21; // B1 + +static const pin_map_t digitalPinMap[] = { + {&DDRD, &PIND, &PORTD, 0}, // D0 0 + {&DDRD, &PIND, &PORTD, 1}, // D1 1 + {&DDRD, &PIND, &PORTD, 2}, // D2 2 + {&DDRD, &PIND, &PORTD, 3}, // D3 3 + {&DDRD, &PIND, &PORTD, 4}, // D4 4 + {&DDRD, &PIND, &PORTD, 5}, // D5 5 + {&DDRD, &PIND, &PORTD, 6}, // D6 6 + {&DDRD, &PIND, &PORTD, 7}, // D7 7 + {&DDRE, &PINE, &PORTE, 0}, // E0 8 + {&DDRE, &PINE, &PORTE, 1}, // E1 9 + {&DDRC, &PINC, &PORTC, 0}, // C0 10 + {&DDRC, &PINC, &PORTC, 1}, // C1 11 + {&DDRC, &PINC, &PORTC, 2}, // C2 12 + {&DDRC, &PINC, &PORTC, 3}, // C3 13 + {&DDRC, &PINC, &PORTC, 4}, // C4 14 + {&DDRC, &PINC, &PORTC, 5}, // C5 15 + {&DDRC, &PINC, &PORTC, 6}, // C6 16 + {&DDRC, &PINC, &PORTC, 7}, // C7 17 + {&DDRE, &PINE, &PORTE, 6}, // E6 18 + {&DDRE, &PINE, &PORTE, 7}, // E7 19 + {&DDRB, &PINB, &PORTB, 0}, // B0 20 + {&DDRB, &PINB, &PORTB, 1}, // B1 21 + {&DDRB, &PINB, &PORTB, 2}, // B2 22 + {&DDRB, &PINB, &PORTB, 3}, // B3 23 + {&DDRB, &PINB, &PORTB, 4}, // B4 24 + {&DDRB, &PINB, &PORTB, 5}, // B5 25 + {&DDRB, &PINB, &PORTB, 6}, // B6 26 + {&DDRB, &PINB, &PORTB, 7}, // B7 27 + {&DDRA, &PINA, &PORTA, 0}, // A0 28 + {&DDRA, &PINA, &PORTA, 1}, // A1 29 + {&DDRA, &PINA, &PORTA, 2}, // A2 30 + {&DDRA, &PINA, &PORTA, 3}, // A3 31 + {&DDRA, &PINA, &PORTA, 4}, // A4 32 + {&DDRA, &PINA, &PORTA, 5}, // A5 33 + {&DDRA, &PINA, &PORTA, 6}, // A6 34 + {&DDRA, &PINA, &PORTA, 7}, // A7 35 + {&DDRE, &PINE, &PORTE, 4}, // E4 36 + {&DDRE, &PINE, &PORTE, 5}, // E5 37 + {&DDRF, &PINF, &PORTF, 0}, // F0 38 + {&DDRF, &PINF, &PORTF, 1}, // F1 39 + {&DDRF, &PINF, &PORTF, 2}, // F2 40 + {&DDRF, &PINF, &PORTF, 3}, // F3 41 + {&DDRF, &PINF, &PORTF, 4}, // F4 42 + {&DDRF, &PINF, &PORTF, 5}, // F5 43 + {&DDRF, &PINF, &PORTF, 6}, // F6 44 + {&DDRF, &PINF, &PORTF, 7} // F7 45 +}; +//------------------------------------------------------------------------------ +#elif defined(__AVR_ATmega168__)\ +||defined(__AVR_ATmega168P__)\ +||defined(__AVR_ATmega328P__) +// 168 and 328 Arduinos + +// Two Wire (aka I2C) ports +uint8_t const SDA_PIN = 18; // C4 +uint8_t const SCL_PIN = 19; // C5 + +// SPI port +uint8_t const SS_PIN = 10; // B2 +uint8_t const MOSI_PIN = 11; // B3 +uint8_t const MISO_PIN = 12; // B4 +uint8_t const SCK_PIN = 13; // B5 + +static const pin_map_t digitalPinMap[] = { + {&DDRD, &PIND, &PORTD, 0}, // D0 0 + {&DDRD, &PIND, &PORTD, 1}, // D1 1 + {&DDRD, &PIND, &PORTD, 2}, // D2 2 + {&DDRD, &PIND, &PORTD, 3}, // D3 3 + {&DDRD, &PIND, &PORTD, 4}, // D4 4 + {&DDRD, &PIND, &PORTD, 5}, // D5 5 + {&DDRD, &PIND, &PORTD, 6}, // D6 6 + {&DDRD, &PIND, &PORTD, 7}, // D7 7 + {&DDRB, &PINB, &PORTB, 0}, // B0 8 + {&DDRB, &PINB, &PORTB, 1}, // B1 9 + {&DDRB, &PINB, &PORTB, 2}, // B2 10 + {&DDRB, &PINB, &PORTB, 3}, // B3 11 + {&DDRB, &PINB, &PORTB, 4}, // B4 12 + {&DDRB, &PINB, &PORTB, 5}, // B5 13 + {&DDRC, &PINC, &PORTC, 0}, // C0 14 + {&DDRC, &PINC, &PORTC, 1}, // C1 15 + {&DDRC, &PINC, &PORTC, 2}, // C2 16 + {&DDRC, &PINC, &PORTC, 3}, // C3 17 + {&DDRC, &PINC, &PORTC, 4}, // C4 18 + {&DDRC, &PINC, &PORTC, 5} // C5 19 +}; +#else // defined(__AVR_ATmega1280__) +#error unknown chip +#endif // defined(__AVR_ATmega1280__) +//------------------------------------------------------------------------------ +static const uint8_t digitalPinCount = sizeof(digitalPinMap)/sizeof(pin_map_t); + +uint8_t badPinNumber(void) + __attribute__((error("Pin number is too large or not a constant"))); + +static inline __attribute__((always_inline)) + bool getPinMode(uint8_t pin) { + if (__builtin_constant_p(pin) && pin < digitalPinCount) { + return (*digitalPinMap[pin].ddr >> digitalPinMap[pin].bit) & 1; + } else { + return badPinNumber(); + } +} +static inline __attribute__((always_inline)) + void setPinMode(uint8_t pin, uint8_t mode) { + if (__builtin_constant_p(pin) && pin < digitalPinCount) { + if (mode) { + *digitalPinMap[pin].ddr |= 1 << digitalPinMap[pin].bit; + } else { + *digitalPinMap[pin].ddr &= ~(1 << digitalPinMap[pin].bit); + } + } else { + badPinNumber(); + } +} +static inline __attribute__((always_inline)) + bool fastDigitalRead(uint8_t pin) { + if (__builtin_constant_p(pin) && pin < digitalPinCount) { + return (*digitalPinMap[pin].pin >> digitalPinMap[pin].bit) & 1; + } else { + return badPinNumber(); + } +} +static inline __attribute__((always_inline)) + void fastDigitalWrite(uint8_t pin, uint8_t value) { + if (__builtin_constant_p(pin) && pin < digitalPinCount) { + if (value) { + *digitalPinMap[pin].port |= 1 << digitalPinMap[pin].bit; + } else { + *digitalPinMap[pin].port &= ~(1 << digitalPinMap[pin].bit); + } + } else { + badPinNumber(); + } +} +#endif // Sd2PinMap_h + + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/SdBaseFile.cpp b/Marlin/Marlin/SdBaseFile.cpp new file mode 100644 index 0000000000..c4d538073a --- /dev/null +++ b/Marlin/Marlin/SdBaseFile.cpp @@ -0,0 +1,1825 @@ +/* Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ + +#include "Marlin.h" +#ifdef SDSUPPORT + +#include "SdBaseFile.h" +//------------------------------------------------------------------------------ +// pointer to cwd directory +SdBaseFile* SdBaseFile::cwd_ = 0; +// callback function for date/time +void (*SdBaseFile::dateTime_)(uint16_t* date, uint16_t* time) = 0; +//------------------------------------------------------------------------------ +// add a cluster to a file +bool SdBaseFile::addCluster() { + if (!vol_->allocContiguous(1, &curCluster_)) goto fail; + + // if first cluster of file link to directory entry + if (firstCluster_ == 0) { + firstCluster_ = curCluster_; + flags_ |= F_FILE_DIR_DIRTY; + } + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +// Add a cluster to a directory file and zero the cluster. +// return with first block of cluster in the cache +bool SdBaseFile::addDirCluster() { + uint32_t block; + // max folder size + if (fileSize_/sizeof(dir_t) >= 0XFFFF) goto fail; + + if (!addCluster()) goto fail; + if (!vol_->cacheFlush()) goto fail; + + block = vol_->clusterStartBlock(curCluster_); + + // set cache to first block of cluster + vol_->cacheSetBlockNumber(block, true); + + // zero first block of cluster + memset(vol_->cacheBuffer_.data, 0, 512); + + // zero rest of cluster + for (uint8_t i = 1; i < vol_->blocksPerCluster_; i++) { + if (!vol_->writeBlock(block + i, vol_->cacheBuffer_.data)) goto fail; + } + // Increase directory file size by cluster size + fileSize_ += 512UL << vol_->clusterSizeShift_; + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +// cache a file's directory entry +// return pointer to cached entry or null for failure +dir_t* SdBaseFile::cacheDirEntry(uint8_t action) { + if (!vol_->cacheRawBlock(dirBlock_, action)) goto fail; + return vol_->cache()->dir + dirIndex_; + + fail: + return 0; +} +//------------------------------------------------------------------------------ +/** Close a file and force cached data and directory information + * to be written to the storage device. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include no file is open or an I/O error. + */ +bool SdBaseFile::close() { + bool rtn = sync(); + type_ = FAT_FILE_TYPE_CLOSED; + return rtn; +} +//------------------------------------------------------------------------------ +/** Check for contiguous file and return its raw block range. + * + * \param[out] bgnBlock the first block address for the file. + * \param[out] endBlock the last block address for the file. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include file is not contiguous, file has zero length + * or an I/O error occurred. + */ +bool SdBaseFile::contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock) { + // error if no blocks + if (firstCluster_ == 0) goto fail; + + for (uint32_t c = firstCluster_; ; c++) { + uint32_t next; + if (!vol_->fatGet(c, &next)) goto fail; + + // check for contiguous + if (next != (c + 1)) { + // error if not end of chain + if (!vol_->isEOC(next)) goto fail; + *bgnBlock = vol_->clusterStartBlock(firstCluster_); + *endBlock = vol_->clusterStartBlock(c) + + vol_->blocksPerCluster_ - 1; + return true; + } + } + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Create and open a new contiguous file of a specified size. + * + * \note This function only supports short DOS 8.3 names. + * See open() for more information. + * + * \param[in] dirFile The directory where the file will be created. + * \param[in] path A path with a valid DOS 8.3 file name. + * \param[in] size The desired file size. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include \a path contains + * an invalid DOS 8.3 file name, the FAT volume has not been initialized, + * a file is already open, the file already exists, the root + * directory is full or an I/O error. + * + */ +bool SdBaseFile::createContiguous(SdBaseFile* dirFile, + const char* path, uint32_t size) { + uint32_t count; + // don't allow zero length file + if (size == 0) goto fail; + if (!open(dirFile, path, O_CREAT | O_EXCL | O_RDWR)) goto fail; + + // calculate number of clusters needed + count = ((size - 1) >> (vol_->clusterSizeShift_ + 9)) + 1; + + // allocate clusters + if (!vol_->allocContiguous(count, &firstCluster_)) { + remove(); + goto fail; + } + fileSize_ = size; + + // insure sync() will update dir entry + flags_ |= F_FILE_DIR_DIRTY; + + return sync(); + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Return a file's directory entry. + * + * \param[out] dir Location for return of the file's directory entry. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool SdBaseFile::dirEntry(dir_t* dir) { + dir_t* p; + // make sure fields on SD are correct + if (!sync()) goto fail; + + // read entry + p = cacheDirEntry(SdVolume::CACHE_FOR_READ); + if (!p) goto fail; + + // copy to caller's struct + memcpy(dir, p, sizeof(dir_t)); + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Format the name field of \a dir into the 13 byte array + * \a name in standard 8.3 short name format. + * + * \param[in] dir The directory structure containing the name. + * \param[out] name A 13 byte char array for the formatted name. + */ +void SdBaseFile::dirName(const dir_t& dir, char* name) { + uint8_t j = 0; + for (uint8_t i = 0; i < 11; i++) { + if (dir.name[i] == ' ')continue; + if (i == 8) name[j++] = '.'; + name[j++] = dir.name[i]; + } + name[j] = 0; +} +//------------------------------------------------------------------------------ +/** Test for the existence of a file in a directory + * + * \param[in] name Name of the file to be tested for. + * + * The calling instance must be an open directory file. + * + * dirFile.exists("TOFIND.TXT") searches for "TOFIND.TXT" in the directory + * dirFile. + * + * \return true if the file exists else false. + */ +bool SdBaseFile::exists(const char* name) { + SdBaseFile file; + return file.open(this, name, O_READ); +} +//------------------------------------------------------------------------------ +/** + * Get a string from a file. + * + * fgets() reads bytes from a file into the array pointed to by \a str, until + * \a num - 1 bytes are read, or a delimiter is read and transferred to \a str, + * or end-of-file is encountered. The string is then terminated + * with a null byte. + * + * fgets() deletes CR, '\\r', from the string. This insures only a '\\n' + * terminates the string for Windows text files which use CRLF for newline. + * + * \param[out] str Pointer to the array where the string is stored. + * \param[in] num Maximum number of characters to be read + * (including the final null byte). Usually the length + * of the array \a str is used. + * \param[in] delim Optional set of delimiters. The default is "\n". + * + * \return For success fgets() returns the length of the string in \a str. + * If no data is read, fgets() returns zero for EOF or -1 if an error occurred. + **/ +int16_t SdBaseFile::fgets(char* str, int16_t num, char* delim) { + char ch; + int16_t n = 0; + int16_t r = -1; + while ((n + 1) < num && (r = read(&ch, 1)) == 1) { + // delete CR + if (ch == '\r') continue; + str[n++] = ch; + if (!delim) { + if (ch == '\n') break; + } else { + if (strchr(delim, ch)) break; + } + } + if (r < 0) { + // read error + return -1; + } + str[n] = '\0'; + return n; +} +//------------------------------------------------------------------------------ +/** Get a file's name + * + * \param[out] name An array of 13 characters for the file's name. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool SdBaseFile::getFilename(char* name) { + if (!isOpen()) return false; + + if (isRoot()) { + name[0] = '/'; + name[1] = '\0'; + return true; + } + // cache entry + dir_t* p = cacheDirEntry(SdVolume::CACHE_FOR_READ); + if (!p) return false; + + // format name + dirName(*p, name); + return true; +} +//------------------------------------------------------------------------------ +void SdBaseFile::getpos(fpos_t* pos) { + pos->position = curPosition_; + pos->cluster = curCluster_; +} + +//------------------------------------------------------------------------------ +/** List directory contents. + * + * \param[in] pr Print stream for list. + * + * \param[in] flags The inclusive OR of + * + * LS_DATE - %Print file modification date + * + * LS_SIZE - %Print file size. + * + * LS_R - Recursive list of subdirectories. + * + * \param[in] indent Amount of space before file name. Used for recursive + * list to indicate subdirectory level. + */ +void SdBaseFile::ls(uint8_t flags, uint8_t indent) { + rewind(); + int8_t status; + while ((status = lsPrintNext( flags, indent))) { + if (status > 1 && (flags & LS_R)) { + uint16_t index = curPosition()/32 - 1; + SdBaseFile s; + if (s.open(this, index, O_READ)) s.ls( flags, indent + 2); + seekSet(32 * (index + 1)); + } + } +} +//------------------------------------------------------------------------------ +// saves 32 bytes on stack for ls recursion +// return 0 - EOF, 1 - normal file, or 2 - directory +int8_t SdBaseFile::lsPrintNext( uint8_t flags, uint8_t indent) { + dir_t dir; + uint8_t w = 0; + + while (1) { + if (read(&dir, sizeof(dir)) != sizeof(dir)) return 0; + if (dir.name[0] == DIR_NAME_FREE) return 0; + + // skip deleted entry and entries for . and .. + if (dir.name[0] != DIR_NAME_DELETED && dir.name[0] != '.' + && DIR_IS_FILE_OR_SUBDIR(&dir)) break; + } + // indent for dir level + for (uint8_t i = 0; i < indent; i++) MYSERIAL.write(' '); + + // print name + for (uint8_t i = 0; i < 11; i++) { + if (dir.name[i] == ' ')continue; + if (i == 8) { + MYSERIAL.write('.'); + w++; + } + MYSERIAL.write(dir.name[i]); + w++; + } + if (DIR_IS_SUBDIR(&dir)) { + MYSERIAL.write('/'); + w++; + } + if (flags & (LS_DATE | LS_SIZE)) { + while (w++ < 14) MYSERIAL.write(' '); + } + // print modify date/time if requested + if (flags & LS_DATE) { + MYSERIAL.write(' '); + printFatDate( dir.lastWriteDate); + MYSERIAL.write(' '); + printFatTime( dir.lastWriteTime); + } + // print size if requested + if (!DIR_IS_SUBDIR(&dir) && (flags & LS_SIZE)) { + MYSERIAL.write(' '); + MYSERIAL.print(dir.fileSize); + } + MYSERIAL.println(); + return DIR_IS_FILE(&dir) ? 1 : 2; +} +//------------------------------------------------------------------------------ +// format directory name field from a 8.3 name string +bool SdBaseFile::make83Name(const char* str, uint8_t* name, const char** ptr) { + uint8_t c; + uint8_t n = 7; // max index for part before dot + uint8_t i = 0; + // blank fill name and extension + while (i < 11) name[i++] = ' '; + i = 0; + while (*str != '\0' && *str != '/') { + c = *str++; + if (c == '.') { + if (n == 10) goto fail; // only one dot allowed + n = 10; // max index for full 8.3 name + i = 8; // place for extension + } else { + // illegal FAT characters + PGM_P p = PSTR("|<>^+=?/[];,*\"\\"); + uint8_t b; + while ((b = pgm_read_byte(p++))) if (b == c) goto fail; + // check size and only allow ASCII printable characters + if (i > n || c < 0X21 || c > 0X7E)goto fail; + // only upper case allowed in 8.3 names - convert lower to upper + name[i++] = c < 'a' || c > 'z' ? c : c + ('A' - 'a'); + } + } + *ptr = str; + // must have a file name, extension is optional + return name[0] != ' '; + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Make a new directory. + * + * \param[in] parent An open SdFat instance for the directory that will contain + * the new directory. + * + * \param[in] path A path with a valid 8.3 DOS name for the new directory. + * + * \param[in] pFlag Create missing parent directories if true. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include this file is already open, \a parent is not a + * directory, \a path is invalid or already exists in \a parent. + */ +bool SdBaseFile::mkdir(SdBaseFile* parent, const char* path, bool pFlag) { + uint8_t dname[11]; + SdBaseFile dir1, dir2; + SdBaseFile* sub = &dir1; + SdBaseFile* start = parent; + + if (!parent || isOpen()) goto fail; + + if (*path == '/') { + while (*path == '/') path++; + if (!parent->isRoot()) { + if (!dir2.openRoot(parent->vol_)) goto fail; + parent = &dir2; + } + } + while (1) { + if (!make83Name(path, dname, &path)) goto fail; + while (*path == '/') path++; + if (!*path) break; + if (!sub->open(parent, dname, O_READ)) { + if (!pFlag || !sub->mkdir(parent, dname)) { + goto fail; + } + } + if (parent != start) parent->close(); + parent = sub; + sub = parent != &dir1 ? &dir1 : &dir2; + } + return mkdir(parent, dname); + + fail: + return false; +} +//------------------------------------------------------------------------------ +bool SdBaseFile::mkdir(SdBaseFile* parent, const uint8_t dname[11]) { + uint32_t block; + dir_t d; + dir_t* p; + + if (!parent->isDir()) goto fail; + + // create a normal file + if (!open(parent, dname, O_CREAT | O_EXCL | O_RDWR)) goto fail; + + // convert file to directory + flags_ = O_READ; + type_ = FAT_FILE_TYPE_SUBDIR; + + // allocate and zero first cluster + if (!addDirCluster())goto fail; + + // force entry to SD + if (!sync()) goto fail; + + // cache entry - should already be in cache due to sync() call + p = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!p) goto fail; + + // change directory entry attribute + p->attributes = DIR_ATT_DIRECTORY; + + // make entry for '.' + memcpy(&d, p, sizeof(d)); + d.name[0] = '.'; + for (uint8_t i = 1; i < 11; i++) d.name[i] = ' '; + + // cache block for '.' and '..' + block = vol_->clusterStartBlock(firstCluster_); + if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_WRITE)) goto fail; + + // copy '.' to block + memcpy(&vol_->cache()->dir[0], &d, sizeof(d)); + + // make entry for '..' + d.name[1] = '.'; + if (parent->isRoot()) { + d.firstClusterLow = 0; + d.firstClusterHigh = 0; + } else { + d.firstClusterLow = parent->firstCluster_ & 0XFFFF; + d.firstClusterHigh = parent->firstCluster_ >> 16; + } + // copy '..' to block + memcpy(&vol_->cache()->dir[1], &d, sizeof(d)); + + // write first block + return vol_->cacheFlush(); + + fail: + return false; +} +//------------------------------------------------------------------------------ + /** Open a file in the current working directory. + * + * \param[in] path A path with a valid 8.3 DOS name for a file to be opened. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t). + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ + bool SdBaseFile::open(const char* path, uint8_t oflag) { + return open(cwd_, path, oflag); + } +//------------------------------------------------------------------------------ +/** Open a file or directory by name. + * + * \param[in] dirFile An open SdFat instance for the directory containing the + * file to be opened. + * + * \param[in] path A path with a valid 8.3 DOS name for a file to be opened. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of flags from the following list + * + * O_READ - Open for reading. + * + * O_RDONLY - Same as O_READ. + * + * O_WRITE - Open for writing. + * + * O_WRONLY - Same as O_WRITE. + * + * O_RDWR - Open for reading and writing. + * + * O_APPEND - If set, the file offset shall be set to the end of the + * file prior to each write. + * + * O_AT_END - Set the initial position at the end of the file. + * + * O_CREAT - If the file exists, this flag has no effect except as noted + * under O_EXCL below. Otherwise, the file shall be created + * + * O_EXCL - If O_CREAT and O_EXCL are set, open() shall fail if the file exists. + * + * O_SYNC - Call sync() after each write. This flag should not be used with + * write(uint8_t), write_P(PGM_P), writeln_P(PGM_P), or the Arduino Print class. + * These functions do character at a time writes so sync() will be called + * after each byte. + * + * O_TRUNC - If the file exists and is a regular file, and the file is + * successfully opened and is not read only, its length shall be truncated to 0. + * + * WARNING: A given file must not be opened by more than one SdBaseFile object + * of file corruption may occur. + * + * \note Directory files must be opened read only. Write and truncation is + * not allowed for directory files. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include this file is already open, \a dirFile is not + * a directory, \a path is invalid, the file does not exist + * or can't be opened in the access mode specified by oflag. + */ +bool SdBaseFile::open(SdBaseFile* dirFile, const char* path, uint8_t oflag) { + uint8_t dname[11]; + SdBaseFile dir1, dir2; + SdBaseFile *parent = dirFile; + SdBaseFile *sub = &dir1; + + if (!dirFile) goto fail; + + // error if already open + if (isOpen()) goto fail; + + if (*path == '/') { + while (*path == '/') path++; + if (!dirFile->isRoot()) { + if (!dir2.openRoot(dirFile->vol_)) goto fail; + parent = &dir2; + } + } + while (1) { + if (!make83Name(path, dname, &path)) goto fail; + while (*path == '/') path++; + if (!*path) break; + if (!sub->open(parent, dname, O_READ)) goto fail; + if (parent != dirFile) parent->close(); + parent = sub; + sub = parent != &dir1 ? &dir1 : &dir2; + } + return open(parent, dname, oflag); + + fail: + return false; +} +//------------------------------------------------------------------------------ +// open with filename in dname +bool SdBaseFile::open(SdBaseFile* dirFile, + const uint8_t dname[11], uint8_t oflag) { + bool emptyFound = false; + bool fileFound = false; + uint8_t index; + dir_t* p; + + vol_ = dirFile->vol_; + + dirFile->rewind(); + // search for file + + while (dirFile->curPosition_ < dirFile->fileSize_) { + index = 0XF & (dirFile->curPosition_ >> 5); + p = dirFile->readDirCache(); + if (!p) goto fail; + + if (p->name[0] == DIR_NAME_FREE || p->name[0] == DIR_NAME_DELETED) { + // remember first empty slot + if (!emptyFound) { + dirBlock_ = dirFile->vol_->cacheBlockNumber(); + dirIndex_ = index; + emptyFound = true; + } + // done if no entries follow + if (p->name[0] == DIR_NAME_FREE) break; + } else if (!memcmp(dname, p->name, 11)) { + fileFound = true; + break; + } + } + if (fileFound) { + // don't open existing file if O_EXCL + if (oflag & O_EXCL) goto fail; + } else { + // don't create unless O_CREAT and O_WRITE + if (!(oflag & O_CREAT) || !(oflag & O_WRITE)) goto fail; + if (emptyFound) { + index = dirIndex_; + p = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!p) goto fail; + } else { + if (dirFile->type_ == FAT_FILE_TYPE_ROOT_FIXED) goto fail; + + // add and zero cluster for dirFile - first cluster is in cache for write + if (!dirFile->addDirCluster()) goto fail; + + // use first entry in cluster + p = dirFile->vol_->cache()->dir; + index = 0; + } + // initialize as empty file + memset(p, 0, sizeof(dir_t)); + memcpy(p->name, dname, 11); + + // set timestamps + if (dateTime_) { + // call user date/time function + dateTime_(&p->creationDate, &p->creationTime); + } else { + // use default date/time + p->creationDate = FAT_DEFAULT_DATE; + p->creationTime = FAT_DEFAULT_TIME; + } + p->lastAccessDate = p->creationDate; + p->lastWriteDate = p->creationDate; + p->lastWriteTime = p->creationTime; + + // write entry to SD + if (!dirFile->vol_->cacheFlush()) goto fail; + } + // open entry in cache + return openCachedEntry(index, oflag); + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Open a file by index. + * + * \param[in] dirFile An open SdFat instance for the directory. + * + * \param[in] index The \a index of the directory entry for the file to be + * opened. The value for \a index is (directory file position)/32. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC. + * + * See open() by path for definition of flags. + * \return true for success or false for failure. + */ +bool SdBaseFile::open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag) { + dir_t* p; + + vol_ = dirFile->vol_; + + // error if already open + if (isOpen() || !dirFile) goto fail; + + // don't open existing file if O_EXCL - user call error + if (oflag & O_EXCL) goto fail; + + // seek to location of entry + if (!dirFile->seekSet(32 * index)) goto fail; + + // read entry into cache + p = dirFile->readDirCache(); + if (!p) goto fail; + + // error if empty slot or '.' or '..' + if (p->name[0] == DIR_NAME_FREE || + p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') { + goto fail; + } + // open cached entry + return openCachedEntry(index & 0XF, oflag); + + fail: + return false; +} +//------------------------------------------------------------------------------ +// open a cached directory entry. Assumes vol_ is initialized +bool SdBaseFile::openCachedEntry(uint8_t dirIndex, uint8_t oflag) { + // location of entry in cache + dir_t* p = &vol_->cache()->dir[dirIndex]; + + // write or truncate is an error for a directory or read-only file + if (p->attributes & (DIR_ATT_READ_ONLY | DIR_ATT_DIRECTORY)) { + if (oflag & (O_WRITE | O_TRUNC)) goto fail; + } + // remember location of directory entry on SD + dirBlock_ = vol_->cacheBlockNumber(); + dirIndex_ = dirIndex; + + // copy first cluster number for directory fields + firstCluster_ = (uint32_t)p->firstClusterHigh << 16; + firstCluster_ |= p->firstClusterLow; + + // make sure it is a normal file or subdirectory + if (DIR_IS_FILE(p)) { + fileSize_ = p->fileSize; + type_ = FAT_FILE_TYPE_NORMAL; + } else if (DIR_IS_SUBDIR(p)) { + if (!vol_->chainSize(firstCluster_, &fileSize_)) goto fail; + type_ = FAT_FILE_TYPE_SUBDIR; + } else { + goto fail; + } + // save open flags for read/write + flags_ = oflag & F_OFLAG; + + // set to start of file + curCluster_ = 0; + curPosition_ = 0; + if ((oflag & O_TRUNC) && !truncate(0)) return false; + return oflag & O_AT_END ? seekEnd(0) : true; + + fail: + type_ = FAT_FILE_TYPE_CLOSED; + return false; +} +//------------------------------------------------------------------------------ +/** Open the next file or subdirectory in a directory. + * + * \param[in] dirFile An open SdFat instance for the directory containing the + * file to be opened. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC. + * + * See open() by path for definition of flags. + * \return true for success or false for failure. + */ +bool SdBaseFile::openNext(SdBaseFile* dirFile, uint8_t oflag) { + dir_t* p; + uint8_t index; + + if (!dirFile) goto fail; + + // error if already open + if (isOpen()) goto fail; + + vol_ = dirFile->vol_; + + while (1) { + index = 0XF & (dirFile->curPosition_ >> 5); + + // read entry into cache + p = dirFile->readDirCache(); + if (!p) goto fail; + + // done if last entry + if (p->name[0] == DIR_NAME_FREE) goto fail; + + // skip empty slot or '.' or '..' + if (p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') { + continue; + } + // must be file or dir + if (DIR_IS_FILE_OR_SUBDIR(p)) { + return openCachedEntry(index, oflag); + } + } + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Open a directory's parent directory. + * + * \param[in] dir Parent of this directory will be opened. Must not be root. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool SdBaseFile::openParent(SdBaseFile* dir) { + dir_t entry; + dir_t* p; + SdBaseFile file; + uint32_t c; + uint32_t cluster; + uint32_t lbn; + // error if already open or dir is root or dir is not a directory + if (isOpen() || !dir || dir->isRoot() || !dir->isDir()) goto fail; + vol_ = dir->vol_; + // position to '..' + if (!dir->seekSet(32)) goto fail; + // read '..' entry + if (dir->read(&entry, sizeof(entry)) != 32) goto fail; + // verify it is '..' + if (entry.name[0] != '.' || entry.name[1] != '.') goto fail; + // start cluster for '..' + cluster = entry.firstClusterLow; + cluster |= (uint32_t)entry.firstClusterHigh << 16; + if (cluster == 0) return openRoot(vol_); + // start block for '..' + lbn = vol_->clusterStartBlock(cluster); + // first block of parent dir + if (!vol_->cacheRawBlock(lbn, SdVolume::CACHE_FOR_READ)) { + goto fail; + } + p = &vol_->cacheBuffer_.dir[1]; + // verify name for '../..' + if (p->name[0] != '.' || p->name[1] != '.') goto fail; + // '..' is pointer to first cluster of parent. open '../..' to find parent + if (p->firstClusterHigh == 0 && p->firstClusterLow == 0) { + if (!file.openRoot(dir->volume())) goto fail; + } else { + if (!file.openCachedEntry(1, O_READ)) goto fail; + } + // search for parent in '../..' + do { + if (file.readDir(&entry, NULL) != 32) goto fail; + c = entry.firstClusterLow; + c |= (uint32_t)entry.firstClusterHigh << 16; + } while (c != cluster); + // open parent + return open(&file, file.curPosition()/32 - 1, O_READ); + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Open a volume's root directory. + * + * \param[in] vol The FAT volume containing the root directory to be opened. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include the file is already open, the FAT volume has + * not been initialized or it a FAT12 volume. + */ +bool SdBaseFile::openRoot(SdVolume* vol) { + // error if file is already open + if (isOpen()) goto fail; + + if (vol->fatType() == 16 || (FAT12_SUPPORT && vol->fatType() == 12)) { + type_ = FAT_FILE_TYPE_ROOT_FIXED; + firstCluster_ = 0; + fileSize_ = 32 * vol->rootDirEntryCount(); + } else if (vol->fatType() == 32) { + type_ = FAT_FILE_TYPE_ROOT32; + firstCluster_ = vol->rootDirStart(); + if (!vol->chainSize(firstCluster_, &fileSize_)) goto fail; + } else { + // volume is not initialized, invalid, or FAT12 without support + return false; + } + vol_ = vol; + // read only + flags_ = O_READ; + + // set to start of file + curCluster_ = 0; + curPosition_ = 0; + + // root has no directory entry + dirBlock_ = 0; + dirIndex_ = 0; + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Return the next available byte without consuming it. + * + * \return The byte if no error and not at eof else -1; + */ +int SdBaseFile::peek() { + fpos_t pos; + getpos(&pos); + int c = read(); + if (c >= 0) setpos(&pos); + return c; +} + +//------------------------------------------------------------------------------ +/** %Print the name field of a directory entry in 8.3 format. + * \param[in] pr Print stream for output. + * \param[in] dir The directory structure containing the name. + * \param[in] width Blank fill name if length is less than \a width. + * \param[in] printSlash Print '/' after directory names if true. + */ +void SdBaseFile::printDirName(const dir_t& dir, + uint8_t width, bool printSlash) { + uint8_t w = 0; + for (uint8_t i = 0; i < 11; i++) { + if (dir.name[i] == ' ')continue; + if (i == 8) { + MYSERIAL.write('.'); + w++; + } + MYSERIAL.write(dir.name[i]); + w++; + } + if (DIR_IS_SUBDIR(&dir) && printSlash) { + MYSERIAL.write('/'); + w++; + } + while (w < width) { + MYSERIAL.write(' '); + w++; + } +} +//------------------------------------------------------------------------------ +// print uint8_t with width 2 +static void print2u( uint8_t v) { + if (v < 10) MYSERIAL.write('0'); + MYSERIAL.print(v, DEC); +} +//------------------------------------------------------------------------------ +/** %Print a directory date field to Serial. + * + * Format is yyyy-mm-dd. + * + * \param[in] fatDate The date field from a directory entry. + */ + +//------------------------------------------------------------------------------ +/** %Print a directory date field. + * + * Format is yyyy-mm-dd. + * + * \param[in] pr Print stream for output. + * \param[in] fatDate The date field from a directory entry. + */ +void SdBaseFile::printFatDate(uint16_t fatDate) { + MYSERIAL.print(FAT_YEAR(fatDate)); + MYSERIAL.write('-'); + print2u( FAT_MONTH(fatDate)); + MYSERIAL.write('-'); + print2u( FAT_DAY(fatDate)); +} + +//------------------------------------------------------------------------------ +/** %Print a directory time field. + * + * Format is hh:mm:ss. + * + * \param[in] pr Print stream for output. + * \param[in] fatTime The time field from a directory entry. + */ +void SdBaseFile::printFatTime( uint16_t fatTime) { + print2u( FAT_HOUR(fatTime)); + MYSERIAL.write(':'); + print2u( FAT_MINUTE(fatTime)); + MYSERIAL.write(':'); + print2u( FAT_SECOND(fatTime)); +} +//------------------------------------------------------------------------------ +/** Print a file's name to Serial + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool SdBaseFile::printName() { + char name[13]; + if (!getFilename(name)) return false; + MYSERIAL.print(name); + return true; +} +//------------------------------------------------------------------------------ +/** Read the next byte from a file. + * + * \return For success read returns the next byte in the file as an int. + * If an error occurs or end of file is reached -1 is returned. + */ +int16_t SdBaseFile::read() { + uint8_t b; + return read(&b, 1) == 1 ? b : -1; +} +//------------------------------------------------------------------------------ +/** Read data from a file starting at the current position. + * + * \param[out] buf Pointer to the location that will receive the data. + * + * \param[in] nbyte Maximum number of bytes to read. + * + * \return For success read() returns the number of bytes read. + * A value less than \a nbyte, including zero, will be returned + * if end of file is reached. + * If an error occurs, read() returns -1. Possible errors include + * read() called before a file has been opened, corrupt file system + * or an I/O error occurred. + */ +int16_t SdBaseFile::read(void* buf, uint16_t nbyte) { + uint8_t* dst = reinterpret_cast(buf); + uint16_t offset; + uint16_t toRead; + uint32_t block; // raw device block number + + // error if not open or write only + if (!isOpen() || !(flags_ & O_READ)) goto fail; + + // max bytes left in file + if (nbyte >= (fileSize_ - curPosition_)) { + nbyte = fileSize_ - curPosition_; + } + // amount left to read + toRead = nbyte; + while (toRead > 0) { + offset = curPosition_ & 0X1FF; // offset in block + if (type_ == FAT_FILE_TYPE_ROOT_FIXED) { + block = vol_->rootDirStart() + (curPosition_ >> 9); + } else { + uint8_t blockOfCluster = vol_->blockOfCluster(curPosition_); + if (offset == 0 && blockOfCluster == 0) { + // start of new cluster + if (curPosition_ == 0) { + // use first cluster in file + curCluster_ = firstCluster_; + } else { + // get next cluster from FAT + if (!vol_->fatGet(curCluster_, &curCluster_)) goto fail; + } + } + block = vol_->clusterStartBlock(curCluster_) + blockOfCluster; + } + uint16_t n = toRead; + + // amount to be read from current block + if (n > (512 - offset)) n = 512 - offset; + + // no buffering needed if n == 512 + if (n == 512 && block != vol_->cacheBlockNumber()) { + if (!vol_->readBlock(block, dst)) goto fail; + } else { + // read block to cache and copy data to caller + if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_READ)) goto fail; + uint8_t* src = vol_->cache()->data + offset; + memcpy(dst, src, n); + } + dst += n; + curPosition_ += n; + toRead -= n; + } + return nbyte; + + fail: + return -1; +} +//------------------------------------------------------------------------------ +/** Read the next directory entry from a directory file. + * + * \param[out] dir The dir_t struct that will receive the data. + * + * \return For success readDir() returns the number of bytes read. + * A value of zero will be returned if end of file is reached. + * If an error occurs, readDir() returns -1. Possible errors include + * readDir() called before a directory has been opened, this is not + * a directory file or an I/O error occurred. + */ +int8_t SdBaseFile::readDir(dir_t* dir, char* longFilename) { + int16_t n; + // if not a directory file or miss-positioned return an error + if (!isDir() || (0X1F & curPosition_)) return -1; + + //If we have a longFilename buffer, mark it as invalid. If we find a long filename it will be filled automaticly. + if (longFilename != NULL) + { + longFilename[0] = '\0'; + } + + while (1) { + n = read(dir, sizeof(dir_t)); + if (n != sizeof(dir_t)) return n == 0 ? 0 : -1; + // last entry if DIR_NAME_FREE + if (dir->name[0] == DIR_NAME_FREE) return 0; + // skip empty entries and entry for . and .. + if (dir->name[0] == DIR_NAME_DELETED || dir->name[0] == '.') continue; + //Fill the long filename if we have a long filename entry, + // long filename entries are stored before the actual filename. + if (DIR_IS_LONG_NAME(dir) && longFilename != NULL) + { + vfat_t *VFAT = (vfat_t*)dir; + //Sanity check the VFAT entry. The first cluster is always set to zero. And th esequence number should be higher then 0 + if (VFAT->firstClusterLow == 0 && (VFAT->sequenceNumber & 0x1F) > 0 && (VFAT->sequenceNumber & 0x1F) <= MAX_VFAT_ENTRIES) + { + //TODO: Store the filename checksum to verify if a none-long filename aware system modified the file table. + n = ((VFAT->sequenceNumber & 0x1F) - 1) * 13; + longFilename[n+0] = VFAT->name1[0]; + longFilename[n+1] = VFAT->name1[1]; + longFilename[n+2] = VFAT->name1[2]; + longFilename[n+3] = VFAT->name1[3]; + longFilename[n+4] = VFAT->name1[4]; + longFilename[n+5] = VFAT->name2[0]; + longFilename[n+6] = VFAT->name2[1]; + longFilename[n+7] = VFAT->name2[2]; + longFilename[n+8] = VFAT->name2[3]; + longFilename[n+9] = VFAT->name2[4]; + longFilename[n+10] = VFAT->name2[5]; + longFilename[n+11] = VFAT->name3[0]; + longFilename[n+12] = VFAT->name3[1]; + //If this VFAT entry is the last one, add a NUL terminator at the end of the string + if (VFAT->sequenceNumber & 0x40) + longFilename[n+13] = '\0'; + } + } + // return if normal file or subdirectory + if (DIR_IS_FILE_OR_SUBDIR(dir)) return n; + } +} +//------------------------------------------------------------------------------ +// Read next directory entry into the cache +// Assumes file is correctly positioned +dir_t* SdBaseFile::readDirCache() { + uint8_t i; + // error if not directory + if (!isDir()) goto fail; + + // index of entry in cache + i = (curPosition_ >> 5) & 0XF; + + // use read to locate and cache block + if (read() < 0) goto fail; + + // advance to next entry + curPosition_ += 31; + + // return pointer to entry + return vol_->cache()->dir + i; + + fail: + return 0; +} +//------------------------------------------------------------------------------ +/** Remove a file. + * + * The directory entry and all data for the file are deleted. + * + * \note This function should not be used to delete the 8.3 version of a + * file that has a long name. For example if a file has the long name + * "New Text Document.txt" you should not delete the 8.3 name "NEWTEX~1.TXT". + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include the file read-only, is a directory, + * or an I/O error occurred. + */ +bool SdBaseFile::remove() { + dir_t* d; + // free any clusters - will fail if read-only or directory + if (!truncate(0)) goto fail; + + // cache directory entry + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) goto fail; + + // mark entry deleted + d->name[0] = DIR_NAME_DELETED; + + // set this file closed + type_ = FAT_FILE_TYPE_CLOSED; + + // write entry to SD + return vol_->cacheFlush(); + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Remove a file. + * + * The directory entry and all data for the file are deleted. + * + * \param[in] dirFile The directory that contains the file. + * \param[in] path Path for the file to be removed. + * + * \note This function should not be used to delete the 8.3 version of a + * file that has a long name. For example if a file has the long name + * "New Text Document.txt" you should not delete the 8.3 name "NEWTEX~1.TXT". + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include the file is a directory, is read only, + * \a dirFile is not a directory, \a path is not found + * or an I/O error occurred. + */ +bool SdBaseFile::remove(SdBaseFile* dirFile, const char* path) { + SdBaseFile file; + if (!file.open(dirFile, path, O_WRITE)) goto fail; + return file.remove(); + + fail: + // can't set iostate - static function + return false; +} +//------------------------------------------------------------------------------ +/** Rename a file or subdirectory. + * + * \param[in] dirFile Directory for the new path. + * \param[in] newPath New path name for the file/directory. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include \a dirFile is not open or is not a directory + * file, newPath is invalid or already exists, or an I/O error occurs. + */ +bool SdBaseFile::rename(SdBaseFile* dirFile, const char* newPath) { + dir_t entry; + uint32_t dirCluster = 0; + SdBaseFile file; + dir_t* d; + + // must be an open file or subdirectory + if (!(isFile() || isSubDir())) goto fail; + + // can't move file + if (vol_ != dirFile->vol_) goto fail; + + // sync() and cache directory entry + sync(); + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) goto fail; + + // save directory entry + memcpy(&entry, d, sizeof(entry)); + + // mark entry deleted + d->name[0] = DIR_NAME_DELETED; + + // make directory entry for new path + if (isFile()) { + if (!file.open(dirFile, newPath, O_CREAT | O_EXCL | O_WRITE)) { + goto restore; + } + } else { + // don't create missing path prefix components + if (!file.mkdir(dirFile, newPath, false)) { + goto restore; + } + // save cluster containing new dot dot + dirCluster = file.firstCluster_; + } + // change to new directory entry + dirBlock_ = file.dirBlock_; + dirIndex_ = file.dirIndex_; + + // mark closed to avoid possible destructor close call + file.type_ = FAT_FILE_TYPE_CLOSED; + + // cache new directory entry + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) goto fail; + + // copy all but name field to new directory entry + memcpy(&d->attributes, &entry.attributes, sizeof(entry) - sizeof(d->name)); + + // update dot dot if directory + if (dirCluster) { + // get new dot dot + uint32_t block = vol_->clusterStartBlock(dirCluster); + if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_READ)) goto fail; + memcpy(&entry, &vol_->cache()->dir[1], sizeof(entry)); + + // free unused cluster + if (!vol_->freeChain(dirCluster)) goto fail; + + // store new dot dot + block = vol_->clusterStartBlock(firstCluster_); + if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_WRITE)) goto fail; + memcpy(&vol_->cache()->dir[1], &entry, sizeof(entry)); + } + return vol_->cacheFlush(); + + restore: + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) goto fail; + // restore entry + d->name[0] = entry.name[0]; + vol_->cacheFlush(); + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Remove a directory file. + * + * The directory file will be removed only if it is empty and is not the + * root directory. rmdir() follows DOS and Windows and ignores the + * read-only attribute for the directory. + * + * \note This function should not be used to delete the 8.3 version of a + * directory that has a long name. For example if a directory has the + * long name "New folder" you should not delete the 8.3 name "NEWFOL~1". + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include the file is not a directory, is the root + * directory, is not empty, or an I/O error occurred. + */ +bool SdBaseFile::rmdir() { + // must be open subdirectory + if (!isSubDir()) goto fail; + + rewind(); + + // make sure directory is empty + while (curPosition_ < fileSize_) { + dir_t* p = readDirCache(); + if (!p) goto fail; + // done if past last used entry + if (p->name[0] == DIR_NAME_FREE) break; + // skip empty slot, '.' or '..' + if (p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') continue; + // error not empty + if (DIR_IS_FILE_OR_SUBDIR(p)) goto fail; + } + // convert empty directory to normal file for remove + type_ = FAT_FILE_TYPE_NORMAL; + flags_ |= O_WRITE; + return remove(); + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Recursively delete a directory and all contained files. + * + * This is like the Unix/Linux 'rm -rf *' if called with the root directory + * hence the name. + * + * Warning - This will remove all contents of the directory including + * subdirectories. The directory will then be removed if it is not root. + * The read-only attribute for files will be ignored. + * + * \note This function should not be used to delete the 8.3 version of + * a directory that has a long name. See remove() and rmdir(). + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool SdBaseFile::rmRfStar() { + uint16_t index; + SdBaseFile f; + rewind(); + while (curPosition_ < fileSize_) { + // remember position + index = curPosition_/32; + + dir_t* p = readDirCache(); + if (!p) goto fail; + + // done if past last entry + if (p->name[0] == DIR_NAME_FREE) break; + + // skip empty slot or '.' or '..' + if (p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') continue; + + // skip if part of long file name or volume label in root + if (!DIR_IS_FILE_OR_SUBDIR(p)) continue; + + if (!f.open(this, index, O_READ)) goto fail; + if (f.isSubDir()) { + // recursively delete + if (!f.rmRfStar()) goto fail; + } else { + // ignore read-only + f.flags_ |= O_WRITE; + if (!f.remove()) goto fail; + } + // position to next entry if required + if (curPosition_ != (32*(index + 1))) { + if (!seekSet(32*(index + 1))) goto fail; + } + } + // don't try to delete root + if (!isRoot()) { + if (!rmdir()) goto fail; + } + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Create a file object and open it in the current working directory. + * + * \param[in] path A path with a valid 8.3 DOS name for a file to be opened. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t). + */ +SdBaseFile::SdBaseFile(const char* path, uint8_t oflag) { + type_ = FAT_FILE_TYPE_CLOSED; + writeError = false; + open(path, oflag); +} +//------------------------------------------------------------------------------ +/** Sets a file's position. + * + * \param[in] pos The new position in bytes from the beginning of the file. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool SdBaseFile::seekSet(uint32_t pos) { + uint32_t nCur; + uint32_t nNew; + // error if file not open or seek past end of file + if (!isOpen() || pos > fileSize_) goto fail; + + if (type_ == FAT_FILE_TYPE_ROOT_FIXED) { + curPosition_ = pos; + goto done; + } + if (pos == 0) { + // set position to start of file + curCluster_ = 0; + curPosition_ = 0; + goto done; + } + // calculate cluster index for cur and new position + nCur = (curPosition_ - 1) >> (vol_->clusterSizeShift_ + 9); + nNew = (pos - 1) >> (vol_->clusterSizeShift_ + 9); + + if (nNew < nCur || curPosition_ == 0) { + // must follow chain from first cluster + curCluster_ = firstCluster_; + } else { + // advance from curPosition + nNew -= nCur; + } + while (nNew--) { + if (!vol_->fatGet(curCluster_, &curCluster_)) goto fail; + } + curPosition_ = pos; + + done: + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +void SdBaseFile::setpos(fpos_t* pos) { + curPosition_ = pos->position; + curCluster_ = pos->cluster; +} +//------------------------------------------------------------------------------ +/** The sync() call causes all modified data and directory fields + * to be written to the storage device. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include a call to sync() before a file has been + * opened or an I/O error. + */ +bool SdBaseFile::sync() { + // only allow open files and directories + if (!isOpen()) goto fail; + + if (flags_ & F_FILE_DIR_DIRTY) { + dir_t* d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + // check for deleted by another open file object + if (!d || d->name[0] == DIR_NAME_DELETED) goto fail; + + // do not set filesize for dir files + if (!isDir()) d->fileSize = fileSize_; + + // update first cluster fields + d->firstClusterLow = firstCluster_ & 0XFFFF; + d->firstClusterHigh = firstCluster_ >> 16; + + // set modify time if user supplied a callback date/time function + if (dateTime_) { + dateTime_(&d->lastWriteDate, &d->lastWriteTime); + d->lastAccessDate = d->lastWriteDate; + } + // clear directory dirty + flags_ &= ~F_FILE_DIR_DIRTY; + } + return vol_->cacheFlush(); + + fail: + writeError = true; + return false; +} +//------------------------------------------------------------------------------ +/** Copy a file's timestamps + * + * \param[in] file File to copy timestamps from. + * + * \note + * Modify and access timestamps may be overwritten if a date time callback + * function has been set by dateTimeCallback(). + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool SdBaseFile::timestamp(SdBaseFile* file) { + dir_t* d; + dir_t dir; + + // get timestamps + if (!file->dirEntry(&dir)) goto fail; + + // update directory fields + if (!sync()) goto fail; + + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) goto fail; + + // copy timestamps + d->lastAccessDate = dir.lastAccessDate; + d->creationDate = dir.creationDate; + d->creationTime = dir.creationTime; + d->creationTimeTenths = dir.creationTimeTenths; + d->lastWriteDate = dir.lastWriteDate; + d->lastWriteTime = dir.lastWriteTime; + + // write back entry + return vol_->cacheFlush(); + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Set a file's timestamps in its directory entry. + * + * \param[in] flags Values for \a flags are constructed by a bitwise-inclusive + * OR of flags from the following list + * + * T_ACCESS - Set the file's last access date. + * + * T_CREATE - Set the file's creation date and time. + * + * T_WRITE - Set the file's last write/modification date and time. + * + * \param[in] year Valid range 1980 - 2107 inclusive. + * + * \param[in] month Valid range 1 - 12 inclusive. + * + * \param[in] day Valid range 1 - 31 inclusive. + * + * \param[in] hour Valid range 0 - 23 inclusive. + * + * \param[in] minute Valid range 0 - 59 inclusive. + * + * \param[in] second Valid range 0 - 59 inclusive + * + * \note It is possible to set an invalid date since there is no check for + * the number of days in a month. + * + * \note + * Modify and access timestamps may be overwritten if a date time callback + * function has been set by dateTimeCallback(). + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + */ +bool SdBaseFile::timestamp(uint8_t flags, uint16_t year, uint8_t month, + uint8_t day, uint8_t hour, uint8_t minute, uint8_t second) { + uint16_t dirDate; + uint16_t dirTime; + dir_t* d; + + if (!isOpen() + || year < 1980 + || year > 2107 + || month < 1 + || month > 12 + || day < 1 + || day > 31 + || hour > 23 + || minute > 59 + || second > 59) { + goto fail; + } + // update directory entry + if (!sync()) goto fail; + + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) goto fail; + + dirDate = FAT_DATE(year, month, day); + dirTime = FAT_TIME(hour, minute, second); + if (flags & T_ACCESS) { + d->lastAccessDate = dirDate; + } + if (flags & T_CREATE) { + d->creationDate = dirDate; + d->creationTime = dirTime; + // seems to be units of 1/100 second not 1/10 as Microsoft states + d->creationTimeTenths = second & 1 ? 100 : 0; + } + if (flags & T_WRITE) { + d->lastWriteDate = dirDate; + d->lastWriteTime = dirTime; + } + return vol_->cacheFlush(); + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Truncate a file to a specified length. The current file position + * will be maintained if it is less than or equal to \a length otherwise + * it will be set to end of file. + * + * \param[in] length The desired length for the file. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. + * Reasons for failure include file is read only, file is a directory, + * \a length is greater than the current file size or an I/O error occurs. + */ +bool SdBaseFile::truncate(uint32_t length) { + uint32_t newPos; + // error if not a normal file or read-only + if (!isFile() || !(flags_ & O_WRITE)) goto fail; + + // error if length is greater than current size + if (length > fileSize_) goto fail; + + // fileSize and length are zero - nothing to do + if (fileSize_ == 0) return true; + + // remember position for seek after truncation + newPos = curPosition_ > length ? length : curPosition_; + + // position to last cluster in truncated file + if (!seekSet(length)) goto fail; + + if (length == 0) { + // free all clusters + if (!vol_->freeChain(firstCluster_)) goto fail; + firstCluster_ = 0; + } else { + uint32_t toFree; + if (!vol_->fatGet(curCluster_, &toFree)) goto fail; + + if (!vol_->isEOC(toFree)) { + // free extra clusters + if (!vol_->freeChain(toFree)) goto fail; + + // current cluster is end of chain + if (!vol_->fatPutEOC(curCluster_)) goto fail; + } + } + fileSize_ = length; + + // need to update directory entry + flags_ |= F_FILE_DIR_DIRTY; + + if (!sync()) goto fail; + + // set file to correct position + return seekSet(newPos); + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Write data to an open file. + * + * \note Data is moved to the cache but may not be written to the + * storage device until sync() is called. + * + * \param[in] buf Pointer to the location of the data to be written. + * + * \param[in] nbyte Number of bytes to write. + * + * \return For success write() returns the number of bytes written, always + * \a nbyte. If an error occurs, write() returns -1. Possible errors + * include write() is called before a file has been opened, write is called + * for a read-only file, device is full, a corrupt file system or an I/O error. + * + */ +int16_t SdBaseFile::write(const void* buf, uint16_t nbyte) { + // convert void* to uint8_t* - must be before goto statements + const uint8_t* src = reinterpret_cast(buf); + + // number of bytes left to write - must be before goto statements + uint16_t nToWrite = nbyte; + + // error if not a normal file or is read-only + if (!isFile() || !(flags_ & O_WRITE)) goto fail; + + // seek to end of file if append flag + if ((flags_ & O_APPEND) && curPosition_ != fileSize_) { + if (!seekEnd()) goto fail; + } + + while (nToWrite > 0) { + uint8_t blockOfCluster = vol_->blockOfCluster(curPosition_); + uint16_t blockOffset = curPosition_ & 0X1FF; + if (blockOfCluster == 0 && blockOffset == 0) { + // start of new cluster + if (curCluster_ == 0) { + if (firstCluster_ == 0) { + // allocate first cluster of file + if (!addCluster()) goto fail; + } else { + curCluster_ = firstCluster_; + } + } else { + uint32_t next; + if (!vol_->fatGet(curCluster_, &next)) goto fail; + if (vol_->isEOC(next)) { + // add cluster if at end of chain + if (!addCluster()) goto fail; + } else { + curCluster_ = next; + } + } + } + // max space in block + uint16_t n = 512 - blockOffset; + + // lesser of space and amount to write + if (n > nToWrite) n = nToWrite; + + // block for data write + uint32_t block = vol_->clusterStartBlock(curCluster_) + blockOfCluster; + if (n == 512) { + // full block - don't need to use cache + if (vol_->cacheBlockNumber() == block) { + // invalidate cache if block is in cache + vol_->cacheSetBlockNumber(0XFFFFFFFF, false); + } + if (!vol_->writeBlock(block, src)) goto fail; + } else { + if (blockOffset == 0 && curPosition_ >= fileSize_) { + // start of new block don't need to read into cache + if (!vol_->cacheFlush()) goto fail; + // set cache dirty and SD address of block + vol_->cacheSetBlockNumber(block, true); + } else { + // rewrite part of block + if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_WRITE)) goto fail; + } + uint8_t* dst = vol_->cache()->data + blockOffset; + memcpy(dst, src, n); + } + curPosition_ += n; + src += n; + nToWrite -= n; + } + if (curPosition_ > fileSize_) { + // update fileSize and insure sync will update dir entry + fileSize_ = curPosition_; + flags_ |= F_FILE_DIR_DIRTY; + } else if (dateTime_ && nbyte) { + // insure sync will update modified date and time + flags_ |= F_FILE_DIR_DIRTY; + } + + if (flags_ & O_SYNC) { + if (!sync()) goto fail; + } + return nbyte; + + fail: + // return for write error + writeError = true; + return -1; +} +//------------------------------------------------------------------------------ +// suppress cpplint warnings with NOLINT comment +#if ALLOW_DEPRECATED_FUNCTIONS && !defined(DOXYGEN) +void (*SdBaseFile::oldDateTime_)(uint16_t& date, uint16_t& time) = 0; // NOLINT +#endif // ALLOW_DEPRECATED_FUNCTIONS + + +#endif diff --git a/Marlin/Marlin/SdBaseFile.h b/Marlin/Marlin/SdBaseFile.h new file mode 100644 index 0000000000..dea299a646 --- /dev/null +++ b/Marlin/Marlin/SdBaseFile.h @@ -0,0 +1,483 @@ +/* Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +#include "Marlin.h" +#ifdef SDSUPPORT + +#ifndef SdBaseFile_h +#define SdBaseFile_h +/** + * \file + * \brief SdBaseFile class + */ +#include "Marlin.h" +#include "SdFatConfig.h" +#include "SdVolume.h" +//------------------------------------------------------------------------------ +/** + * \struct fpos_t + * \brief internal type for istream + * do not use in user apps + */ +struct fpos_t { + /** stream position */ + uint32_t position; + /** cluster for position */ + uint32_t cluster; + fpos_t() : position(0), cluster(0) {} +}; + +// use the gnu style oflag in open() +/** open() oflag for reading */ +uint8_t const O_READ = 0X01; +/** open() oflag - same as O_IN */ +uint8_t const O_RDONLY = O_READ; +/** open() oflag for write */ +uint8_t const O_WRITE = 0X02; +/** open() oflag - same as O_WRITE */ +uint8_t const O_WRONLY = O_WRITE; +/** open() oflag for reading and writing */ +uint8_t const O_RDWR = (O_READ | O_WRITE); +/** open() oflag mask for access modes */ +uint8_t const O_ACCMODE = (O_READ | O_WRITE); +/** The file offset shall be set to the end of the file prior to each write. */ +uint8_t const O_APPEND = 0X04; +/** synchronous writes - call sync() after each write */ +uint8_t const O_SYNC = 0X08; +/** truncate the file to zero length */ +uint8_t const O_TRUNC = 0X10; +/** set the initial position at the end of the file */ +uint8_t const O_AT_END = 0X20; +/** create the file if nonexistent */ +uint8_t const O_CREAT = 0X40; +/** If O_CREAT and O_EXCL are set, open() shall fail if the file exists */ +uint8_t const O_EXCL = 0X80; + +// SdBaseFile class static and const definitions +// flags for ls() +/** ls() flag to print modify date */ +uint8_t const LS_DATE = 1; +/** ls() flag to print file size */ +uint8_t const LS_SIZE = 2; +/** ls() flag for recursive list of subdirectories */ +uint8_t const LS_R = 4; + + +// flags for timestamp +/** set the file's last access date */ +uint8_t const T_ACCESS = 1; +/** set the file's creation date and time */ +uint8_t const T_CREATE = 2; +/** Set the file's write date and time */ +uint8_t const T_WRITE = 4; +// values for type_ +/** This file has not been opened. */ +uint8_t const FAT_FILE_TYPE_CLOSED = 0; +/** A normal file */ +uint8_t const FAT_FILE_TYPE_NORMAL = 1; +/** A FAT12 or FAT16 root directory */ +uint8_t const FAT_FILE_TYPE_ROOT_FIXED = 2; +/** A FAT32 root directory */ +uint8_t const FAT_FILE_TYPE_ROOT32 = 3; +/** A subdirectory file*/ +uint8_t const FAT_FILE_TYPE_SUBDIR = 4; +/** Test value for directory type */ +uint8_t const FAT_FILE_TYPE_MIN_DIR = FAT_FILE_TYPE_ROOT_FIXED; + +/** date field for FAT directory entry + * \param[in] year [1980,2107] + * \param[in] month [1,12] + * \param[in] day [1,31] + * + * \return Packed date for dir_t entry. + */ +static inline uint16_t FAT_DATE(uint16_t year, uint8_t month, uint8_t day) { + return (year - 1980) << 9 | month << 5 | day; +} +/** year part of FAT directory date field + * \param[in] fatDate Date in packed dir format. + * + * \return Extracted year [1980,2107] + */ +static inline uint16_t FAT_YEAR(uint16_t fatDate) { + return 1980 + (fatDate >> 9); +} +/** month part of FAT directory date field + * \param[in] fatDate Date in packed dir format. + * + * \return Extracted month [1,12] + */ +static inline uint8_t FAT_MONTH(uint16_t fatDate) { + return (fatDate >> 5) & 0XF; +} +/** day part of FAT directory date field + * \param[in] fatDate Date in packed dir format. + * + * \return Extracted day [1,31] + */ +static inline uint8_t FAT_DAY(uint16_t fatDate) { + return fatDate & 0X1F; +} +/** time field for FAT directory entry + * \param[in] hour [0,23] + * \param[in] minute [0,59] + * \param[in] second [0,59] + * + * \return Packed time for dir_t entry. + */ +static inline uint16_t FAT_TIME(uint8_t hour, uint8_t minute, uint8_t second) { + return hour << 11 | minute << 5 | second >> 1; +} +/** hour part of FAT directory time field + * \param[in] fatTime Time in packed dir format. + * + * \return Extracted hour [0,23] + */ +static inline uint8_t FAT_HOUR(uint16_t fatTime) { + return fatTime >> 11; +} +/** minute part of FAT directory time field + * \param[in] fatTime Time in packed dir format. + * + * \return Extracted minute [0,59] + */ +static inline uint8_t FAT_MINUTE(uint16_t fatTime) { + return(fatTime >> 5) & 0X3F; +} +/** second part of FAT directory time field + * Note second/2 is stored in packed time. + * + * \param[in] fatTime Time in packed dir format. + * + * \return Extracted second [0,58] + */ +static inline uint8_t FAT_SECOND(uint16_t fatTime) { + return 2*(fatTime & 0X1F); +} +/** Default date for file timestamps is 1 Jan 2000 */ +uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | (1 << 5) | 1; +/** Default time for file timestamp is 1 am */ +uint16_t const FAT_DEFAULT_TIME = (1 << 11); +//------------------------------------------------------------------------------ +/** + * \class SdBaseFile + * \brief Base class for SdFile with Print and C++ streams. + */ +class SdBaseFile { + public: + /** Create an instance. */ + SdBaseFile() : writeError(false), type_(FAT_FILE_TYPE_CLOSED) {} + SdBaseFile(const char* path, uint8_t oflag); + ~SdBaseFile() {if(isOpen()) close();} + /** + * writeError is set to true if an error occurs during a write(). + * Set writeError to false before calling print() and/or write() and check + * for true after calls to print() and/or write(). + */ + bool writeError; + //---------------------------------------------------------------------------- + // helpers for stream classes + /** get position for streams + * \param[out] pos struct to receive position + */ + void getpos(fpos_t* pos); + /** set position for streams + * \param[out] pos struct with value for new position + */ + void setpos(fpos_t* pos); + //---------------------------------------------------------------------------- + bool close(); + bool contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock); + bool createContiguous(SdBaseFile* dirFile, + const char* path, uint32_t size); + /** \return The current cluster number for a file or directory. */ + uint32_t curCluster() const {return curCluster_;} + /** \return The current position for a file or directory. */ + uint32_t curPosition() const {return curPosition_;} + /** \return Current working directory */ + static SdBaseFile* cwd() {return cwd_;} + /** Set the date/time callback function + * + * \param[in] dateTime The user's call back function. The callback + * function is of the form: + * + * \code + * void dateTime(uint16_t* date, uint16_t* time) { + * uint16_t year; + * uint8_t month, day, hour, minute, second; + * + * // User gets date and time from GPS or real-time clock here + * + * // return date using FAT_DATE macro to format fields + * *date = FAT_DATE(year, month, day); + * + * // return time using FAT_TIME macro to format fields + * *time = FAT_TIME(hour, minute, second); + * } + * \endcode + * + * Sets the function that is called when a file is created or when + * a file's directory entry is modified by sync(). All timestamps, + * access, creation, and modify, are set when a file is created. + * sync() maintains the last access date and last modify date/time. + * + * See the timestamp() function. + */ + static void dateTimeCallback( + void (*dateTime)(uint16_t* date, uint16_t* time)) { + dateTime_ = dateTime; + } + /** Cancel the date/time callback function. */ + static void dateTimeCallbackCancel() {dateTime_ = 0;} + bool dirEntry(dir_t* dir); + static void dirName(const dir_t& dir, char* name); + bool exists(const char* name); + int16_t fgets(char* str, int16_t num, char* delim = 0); + /** \return The total number of bytes in a file or directory. */ + uint32_t fileSize() const {return fileSize_;} + /** \return The first cluster number for a file or directory. */ + uint32_t firstCluster() const {return firstCluster_;} + bool getFilename(char* name); + /** \return True if this is a directory else false. */ + bool isDir() const {return type_ >= FAT_FILE_TYPE_MIN_DIR;} + /** \return True if this is a normal file else false. */ + bool isFile() const {return type_ == FAT_FILE_TYPE_NORMAL;} + /** \return True if this is an open file/directory else false. */ + bool isOpen() const {return type_ != FAT_FILE_TYPE_CLOSED;} + /** \return True if this is a subdirectory else false. */ + bool isSubDir() const {return type_ == FAT_FILE_TYPE_SUBDIR;} + /** \return True if this is the root directory. */ + bool isRoot() const { + return type_ == FAT_FILE_TYPE_ROOT_FIXED || type_ == FAT_FILE_TYPE_ROOT32; + } + void ls( uint8_t flags = 0, uint8_t indent = 0); + bool mkdir(SdBaseFile* dir, const char* path, bool pFlag = true); + // alias for backward compactability + bool makeDir(SdBaseFile* dir, const char* path) { + return mkdir(dir, path, false); + } + bool open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag); + bool open(SdBaseFile* dirFile, const char* path, uint8_t oflag); + bool open(const char* path, uint8_t oflag = O_READ); + bool openNext(SdBaseFile* dirFile, uint8_t oflag); + bool openRoot(SdVolume* vol); + int peek(); + static void printFatDate(uint16_t fatDate); + static void printFatTime( uint16_t fatTime); + bool printName(); + int16_t read(); + int16_t read(void* buf, uint16_t nbyte); + int8_t readDir(dir_t* dir, char* longFilename); + static bool remove(SdBaseFile* dirFile, const char* path); + bool remove(); + /** Set the file's current position to zero. */ + void rewind() {seekSet(0);} + bool rename(SdBaseFile* dirFile, const char* newPath); + bool rmdir(); + // for backward compatibility + bool rmDir() {return rmdir();} + bool rmRfStar(); + /** Set the files position to current position + \a pos. See seekSet(). + * \param[in] offset The new position in bytes from the current position. + * \return true for success or false for failure. + */ + bool seekCur(int32_t offset) { + return seekSet(curPosition_ + offset); + } + /** Set the files position to end-of-file + \a offset. See seekSet(). + * \param[in] offset The new position in bytes from end-of-file. + * \return true for success or false for failure. + */ + bool seekEnd(int32_t offset = 0) {return seekSet(fileSize_ + offset);} + bool seekSet(uint32_t pos); + bool sync(); + bool timestamp(SdBaseFile* file); + bool timestamp(uint8_t flag, uint16_t year, uint8_t month, uint8_t day, + uint8_t hour, uint8_t minute, uint8_t second); + /** Type of file. You should use isFile() or isDir() instead of type() + * if possible. + * + * \return The file or directory type. + */ + uint8_t type() const {return type_;} + bool truncate(uint32_t size); + /** \return SdVolume that contains this file. */ + SdVolume* volume() const {return vol_;} + int16_t write(const void* buf, uint16_t nbyte); +//------------------------------------------------------------------------------ + private: + // allow SdFat to set cwd_ + friend class SdFat; + // global pointer to cwd dir + static SdBaseFile* cwd_; + // data time callback function + static void (*dateTime_)(uint16_t* date, uint16_t* time); + // bits defined in flags_ + // should be 0X0F + static uint8_t const F_OFLAG = (O_ACCMODE | O_APPEND | O_SYNC); + // sync of directory entry required + static uint8_t const F_FILE_DIR_DIRTY = 0X80; + + // private data + uint8_t flags_; // See above for definition of flags_ bits + uint8_t fstate_; // error and eof indicator + uint8_t type_; // type of file see above for values + uint32_t curCluster_; // cluster for current file position + uint32_t curPosition_; // current file position in bytes from beginning + uint32_t dirBlock_; // block for this files directory entry + uint8_t dirIndex_; // index of directory entry in dirBlock + uint32_t fileSize_; // file size in bytes + uint32_t firstCluster_; // first cluster of file + SdVolume* vol_; // volume where file is located + + /** experimental don't use */ + bool openParent(SdBaseFile* dir); + // private functions + bool addCluster(); + bool addDirCluster(); + dir_t* cacheDirEntry(uint8_t action); + int8_t lsPrintNext( uint8_t flags, uint8_t indent); + static bool make83Name(const char* str, uint8_t* name, const char** ptr); + bool mkdir(SdBaseFile* parent, const uint8_t dname[11]); + bool open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t oflag); + bool openCachedEntry(uint8_t cacheIndex, uint8_t oflags); + dir_t* readDirCache(); +//------------------------------------------------------------------------------ +// to be deleted + static void printDirName( const dir_t& dir, + uint8_t width, bool printSlash); +//------------------------------------------------------------------------------ +// Deprecated functions - suppress cpplint warnings with NOLINT comment +#if ALLOW_DEPRECATED_FUNCTIONS && !defined(DOXYGEN) + public: + /** \deprecated Use: + * bool contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock); + * \param[out] bgnBlock the first block address for the file. + * \param[out] endBlock the last block address for the file. + * \return true for success or false for failure. + */ + bool contiguousRange(uint32_t& bgnBlock, uint32_t& endBlock) { // NOLINT + return contiguousRange(&bgnBlock, &endBlock); + } + /** \deprecated Use: + * bool createContiguous(SdBaseFile* dirFile, + * const char* path, uint32_t size) + * \param[in] dirFile The directory where the file will be created. + * \param[in] path A path with a valid DOS 8.3 file name. + * \param[in] size The desired file size. + * \return true for success or false for failure. + */ + bool createContiguous(SdBaseFile& dirFile, // NOLINT + const char* path, uint32_t size) { + return createContiguous(&dirFile, path, size); + } + /** \deprecated Use: + * static void dateTimeCallback( + * void (*dateTime)(uint16_t* date, uint16_t* time)); + * \param[in] dateTime The user's call back function. + */ + static void dateTimeCallback( + void (*dateTime)(uint16_t& date, uint16_t& time)) { // NOLINT + oldDateTime_ = dateTime; + dateTime_ = dateTime ? oldToNew : 0; + } + /** \deprecated Use: bool dirEntry(dir_t* dir); + * \param[out] dir Location for return of the file's directory entry. + * \return true for success or false for failure. + */ + bool dirEntry(dir_t& dir) {return dirEntry(&dir);} // NOLINT + /** \deprecated Use: + * bool mkdir(SdBaseFile* dir, const char* path); + * \param[in] dir An open SdFat instance for the directory that will contain + * the new directory. + * \param[in] path A path with a valid 8.3 DOS name for the new directory. + * \return true for success or false for failure. + */ + bool mkdir(SdBaseFile& dir, const char* path) { // NOLINT + return mkdir(&dir, path); + } + /** \deprecated Use: + * bool open(SdBaseFile* dirFile, const char* path, uint8_t oflag); + * \param[in] dirFile An open SdFat instance for the directory containing the + * file to be opened. + * \param[in] path A path with a valid 8.3 DOS name for the file. + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC. + * \return true for success or false for failure. + */ + bool open(SdBaseFile& dirFile, // NOLINT + const char* path, uint8_t oflag) { + return open(&dirFile, path, oflag); + } + /** \deprecated Do not use in new apps + * \param[in] dirFile An open SdFat instance for the directory containing the + * file to be opened. + * \param[in] path A path with a valid 8.3 DOS name for a file to be opened. + * \return true for success or false for failure. + */ + bool open(SdBaseFile& dirFile, const char* path) { // NOLINT + return open(dirFile, path, O_RDWR); + } + /** \deprecated Use: + * bool open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag); + * \param[in] dirFile An open SdFat instance for the directory. + * \param[in] index The \a index of the directory entry for the file to be + * opened. The value for \a index is (directory file position)/32. + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC. + * \return true for success or false for failure. + */ + bool open(SdBaseFile& dirFile, uint16_t index, uint8_t oflag) { // NOLINT + return open(&dirFile, index, oflag); + } + /** \deprecated Use: bool openRoot(SdVolume* vol); + * \param[in] vol The FAT volume containing the root directory to be opened. + * \return true for success or false for failure. + */ + bool openRoot(SdVolume& vol) {return openRoot(&vol);} // NOLINT + /** \deprecated Use: int8_t readDir(dir_t* dir); + * \param[out] dir The dir_t struct that will receive the data. + * \return bytes read for success zero for eof or -1 for failure. + */ + int8_t readDir(dir_t& dir, char* longFilename) {return readDir(&dir, longFilename);} // NOLINT + /** \deprecated Use: + * static uint8_t remove(SdBaseFile* dirFile, const char* path); + * \param[in] dirFile The directory that contains the file. + * \param[in] path The name of the file to be removed. + * \return true for success or false for failure. + */ + static bool remove(SdBaseFile& dirFile, const char* path) { // NOLINT + return remove(&dirFile, path); + } +//------------------------------------------------------------------------------ +// rest are private + private: + static void (*oldDateTime_)(uint16_t& date, uint16_t& time); // NOLINT + static void oldToNew(uint16_t* date, uint16_t* time) { + uint16_t d; + uint16_t t; + oldDateTime_(d, t); + *date = d; + *time = t; + } +#endif // ALLOW_DEPRECATED_FUNCTIONS +}; + +#endif // SdBaseFile_h +#endif diff --git a/Marlin/Marlin/SdFatConfig.h b/Marlin/Marlin/SdFatConfig.h new file mode 100644 index 0000000000..710b1f7924 --- /dev/null +++ b/Marlin/Marlin/SdFatConfig.h @@ -0,0 +1,121 @@ +/* Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +/** + * \file + * \brief configuration definitions + */ +#include "Marlin.h" +#ifdef SDSUPPORT + +#ifndef SdFatConfig_h +#define SdFatConfig_h +#include +//------------------------------------------------------------------------------ +/** + * To use multiple SD cards set USE_MULTIPLE_CARDS nonzero. + * + * Using multiple cards costs 400 - 500 bytes of flash. + * + * Each card requires about 550 bytes of SRAM so use of a Mega is recommended. + */ +#define USE_MULTIPLE_CARDS 0 +//------------------------------------------------------------------------------ +/** + * Call flush for endl if ENDL_CALLS_FLUSH is nonzero + * + * The standard for iostreams is to call flush. This is very costly for + * SdFat. Each call to flush causes 2048 bytes of I/O to the SD. + * + * SdFat has a single 512 byte buffer for SD I/O so it must write the current + * data block to the SD, read the directory block from the SD, update the + * directory entry, write the directory block to the SD and read the data + * block back into the buffer. + * + * The SD flash memory controller is not designed for this many rewrites + * so performance may be reduced by more than a factor of 100. + * + * If ENDL_CALLS_FLUSH is zero, you must call flush and/or close to force + * all data to be written to the SD. + */ +#define ENDL_CALLS_FLUSH 0 +//------------------------------------------------------------------------------ +/** + * Allow use of deprecated functions if ALLOW_DEPRECATED_FUNCTIONS is nonzero + */ +#define ALLOW_DEPRECATED_FUNCTIONS 1 +//------------------------------------------------------------------------------ +/** + * Allow FAT12 volumes if FAT12_SUPPORT is nonzero. + * FAT12 has not been well tested. + */ +#define FAT12_SUPPORT 0 +//------------------------------------------------------------------------------ +/** + * SPI init rate for SD initialization commands. Must be 5 (F_CPU/64) + * or 6 (F_CPU/128). + */ +#define SPI_SD_INIT_RATE 5 +//------------------------------------------------------------------------------ +/** + * Set the SS pin high for hardware SPI. If SS is chip select for another SPI + * device this will disable that device during the SD init phase. + */ +#define SET_SPI_SS_HIGH 1 +//------------------------------------------------------------------------------ +/** + * Define MEGA_SOFT_SPI nonzero to use software SPI on Mega Arduinos. + * Pins used are SS 10, MOSI 11, MISO 12, and SCK 13. + * + * MEGA_SOFT_SPI allows an unmodified Adafruit GPS Shield to be used + * on Mega Arduinos. Software SPI works well with GPS Shield V1.1 + * but many SD cards will fail with GPS Shield V1.0. + */ +#define MEGA_SOFT_SPI 0 +//------------------------------------------------------------------------------ +/** + * Set USE_SOFTWARE_SPI nonzero to always use software SPI. + */ +#define USE_SOFTWARE_SPI 0 +// define software SPI pins so Mega can use unmodified 168/328 shields +/** Software SPI chip select pin for the SD */ +uint8_t const SOFT_SPI_CS_PIN = 10; +/** Software SPI Master Out Slave In pin */ +uint8_t const SOFT_SPI_MOSI_PIN = 11; +/** Software SPI Master In Slave Out pin */ +uint8_t const SOFT_SPI_MISO_PIN = 12; +/** Software SPI Clock pin */ +uint8_t const SOFT_SPI_SCK_PIN = 13; +//------------------------------------------------------------------------------ +/** + * The __cxa_pure_virtual function is an error handler that is invoked when + * a pure virtual function is called. + */ +#define USE_CXA_PURE_VIRTUAL 1 +/** + * Defines for long (vfat) filenames + */ +/** Number of VFAT entries used. Every entry has 13 UTF-16 characters */ +#define MAX_VFAT_ENTRIES (2) +/** Total size of the buffer used to store the long filenames */ +#define LONG_FILENAME_LENGTH (13*MAX_VFAT_ENTRIES+1) +#endif // SdFatConfig_h + + +#endif diff --git a/Marlin/Marlin/SdFatStructs.h b/Marlin/Marlin/SdFatStructs.h new file mode 100644 index 0000000000..3867216160 --- /dev/null +++ b/Marlin/Marlin/SdFatStructs.h @@ -0,0 +1,646 @@ +/* Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +#include "Marlin.h" +#ifdef SDSUPPORT + +#ifndef SdFatStructs_h +#define SdFatStructs_h + +#define PACKED __attribute__((__packed__)) +/** + * \file + * \brief FAT file structures + */ +/* + * mostly from Microsoft document fatgen103.doc + * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx + */ +//------------------------------------------------------------------------------ +/** Value for byte 510 of boot block or MBR */ +uint8_t const BOOTSIG0 = 0X55; +/** Value for byte 511 of boot block or MBR */ +uint8_t const BOOTSIG1 = 0XAA; +/** Value for bootSignature field int FAT/FAT32 boot sector */ +uint8_t const EXTENDED_BOOT_SIG = 0X29; +//------------------------------------------------------------------------------ +/** + * \struct partitionTable + * \brief MBR partition table entry + * + * A partition table entry for a MBR formatted storage device. + * The MBR partition table has four entries. + */ +struct partitionTable { + /** + * Boot Indicator . Indicates whether the volume is the active + * partition. Legal values include: 0X00. Do not use for booting. + * 0X80 Active partition. + */ + uint8_t boot; + /** + * Head part of Cylinder-head-sector address of the first block in + * the partition. Legal values are 0-255. Only used in old PC BIOS. + */ + uint8_t beginHead; + /** + * Sector part of Cylinder-head-sector address of the first block in + * the partition. Legal values are 1-63. Only used in old PC BIOS. + */ + unsigned beginSector : 6; + /** High bits cylinder for first block in partition. */ + unsigned beginCylinderHigh : 2; + /** + * Combine beginCylinderLow with beginCylinderHigh. Legal values + * are 0-1023. Only used in old PC BIOS. + */ + uint8_t beginCylinderLow; + /** + * Partition type. See defines that begin with PART_TYPE_ for + * some Microsoft partition types. + */ + uint8_t type; + /** + * head part of cylinder-head-sector address of the last sector in the + * partition. Legal values are 0-255. Only used in old PC BIOS. + */ + uint8_t endHead; + /** + * Sector part of cylinder-head-sector address of the last sector in + * the partition. Legal values are 1-63. Only used in old PC BIOS. + */ + unsigned endSector : 6; + /** High bits of end cylinder */ + unsigned endCylinderHigh : 2; + /** + * Combine endCylinderLow with endCylinderHigh. Legal values + * are 0-1023. Only used in old PC BIOS. + */ + uint8_t endCylinderLow; + /** Logical block address of the first block in the partition. */ + uint32_t firstSector; + /** Length of the partition, in blocks. */ + uint32_t totalSectors; +} PACKED; +/** Type name for partitionTable */ +typedef struct partitionTable part_t; +//------------------------------------------------------------------------------ +/** + * \struct masterBootRecord + * + * \brief Master Boot Record + * + * The first block of a storage device that is formatted with a MBR. + */ +struct masterBootRecord { + /** Code Area for master boot program. */ + uint8_t codeArea[440]; + /** Optional Windows NT disk signature. May contain boot code. */ + uint32_t diskSignature; + /** Usually zero but may be more boot code. */ + uint16_t usuallyZero; + /** Partition tables. */ + part_t part[4]; + /** First MBR signature byte. Must be 0X55 */ + uint8_t mbrSig0; + /** Second MBR signature byte. Must be 0XAA */ + uint8_t mbrSig1; +} PACKED; +/** Type name for masterBootRecord */ +typedef struct masterBootRecord mbr_t; +//------------------------------------------------------------------------------ +/** + * \struct fat_boot + * + * \brief Boot sector for a FAT12/FAT16 volume. + * + */ +struct fat_boot { + /** + * The first three bytes of the boot sector must be valid, + * executable x 86-based CPU instructions. This includes a + * jump instruction that skips the next nonexecutable bytes. + */ + uint8_t jump[3]; + /** + * This is typically a string of characters that identifies + * the operating system that formatted the volume. + */ + char oemId[8]; + /** + * The size of a hardware sector. Valid decimal values for this + * field are 512, 1024, 2048, and 4096. For most disks used in + * the United States, the value of this field is 512. + */ + uint16_t bytesPerSector; + /** + * Number of sectors per allocation unit. This value must be a + * power of 2 that is greater than 0. The legal values are + * 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided. + */ + uint8_t sectorsPerCluster; + /** + * The number of sectors preceding the start of the first FAT, + * including the boot sector. The value of this field is always 1. + */ + uint16_t reservedSectorCount; + /** + * The number of copies of the FAT on the volume. + * The value of this field is always 2. + */ + uint8_t fatCount; + /** + * For FAT12 and FAT16 volumes, this field contains the count of + * 32-byte directory entries in the root directory. For FAT32 volumes, + * this field must be set to 0. For FAT12 and FAT16 volumes, this + * value should always specify a count that when multiplied by 32 + * results in a multiple of bytesPerSector. FAT16 volumes should + * use the value 512. + */ + uint16_t rootDirEntryCount; + /** + * This field is the old 16-bit total count of sectors on the volume. + * This count includes the count of all sectors in all four regions + * of the volume. This field can be 0; if it is 0, then totalSectors32 + * must be nonzero. For FAT32 volumes, this field must be 0. For + * FAT12 and FAT16 volumes, this field contains the sector count, and + * totalSectors32 is 0 if the total sector count fits + * (is less than 0x10000). + */ + uint16_t totalSectors16; + /** + * This dates back to the old MS-DOS 1.x media determination and is + * no longer usually used for anything. 0xF8 is the standard value + * for fixed (nonremovable) media. For removable media, 0xF0 is + * frequently used. Legal values are 0xF0 or 0xF8-0xFF. + */ + uint8_t mediaType; + /** + * Count of sectors occupied by one FAT on FAT12/FAT16 volumes. + * On FAT32 volumes this field must be 0, and sectorsPerFat32 + * contains the FAT size count. + */ + uint16_t sectorsPerFat16; + /** Sectors per track for interrupt 0x13. Not used otherwise. */ + uint16_t sectorsPerTrack; + /** Number of heads for interrupt 0x13. Not used otherwise. */ + uint16_t headCount; + /** + * Count of hidden sectors preceding the partition that contains this + * FAT volume. This field is generally only relevant for media + * visible on interrupt 0x13. + */ + uint32_t hidddenSectors; + /** + * This field is the new 32-bit total count of sectors on the volume. + * This count includes the count of all sectors in all four regions + * of the volume. This field can be 0; if it is 0, then + * totalSectors16 must be nonzero. + */ + uint32_t totalSectors32; + /** + * Related to the BIOS physical drive number. Floppy drives are + * identified as 0x00 and physical hard disks are identified as + * 0x80, regardless of the number of physical disk drives. + * Typically, this value is set prior to issuing an INT 13h BIOS + * call to specify the device to access. The value is only + * relevant if the device is a boot device. + */ + uint8_t driveNumber; + /** used by Windows NT - should be zero for FAT */ + uint8_t reserved1; + /** 0X29 if next three fields are valid */ + uint8_t bootSignature; + /** + * A random serial number created when formatting a disk, + * which helps to distinguish between disks. + * Usually generated by combining date and time. + */ + uint32_t volumeSerialNumber; + /** + * A field once used to store the volume label. The volume label + * is now stored as a special file in the root directory. + */ + char volumeLabel[11]; + /** + * A field with a value of either FAT, FAT12 or FAT16, + * depending on the disk format. + */ + char fileSystemType[8]; + /** X86 boot code */ + uint8_t bootCode[448]; + /** must be 0X55 */ + uint8_t bootSectorSig0; + /** must be 0XAA */ + uint8_t bootSectorSig1; +} PACKED; +/** Type name for FAT Boot Sector */ +typedef struct fat_boot fat_boot_t; +//------------------------------------------------------------------------------ +/** + * \struct fat32_boot + * + * \brief Boot sector for a FAT32 volume. + * + */ +struct fat32_boot { + /** + * The first three bytes of the boot sector must be valid, + * executable x 86-based CPU instructions. This includes a + * jump instruction that skips the next nonexecutable bytes. + */ + uint8_t jump[3]; + /** + * This is typically a string of characters that identifies + * the operating system that formatted the volume. + */ + char oemId[8]; + /** + * The size of a hardware sector. Valid decimal values for this + * field are 512, 1024, 2048, and 4096. For most disks used in + * the United States, the value of this field is 512. + */ + uint16_t bytesPerSector; + /** + * Number of sectors per allocation unit. This value must be a + * power of 2 that is greater than 0. The legal values are + * 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided. + */ + uint8_t sectorsPerCluster; + /** + * The number of sectors preceding the start of the first FAT, + * including the boot sector. Must not be zero + */ + uint16_t reservedSectorCount; + /** + * The number of copies of the FAT on the volume. + * The value of this field is always 2. + */ + uint8_t fatCount; + /** + * FAT12/FAT16 only. For FAT32 volumes, this field must be set to 0. + */ + uint16_t rootDirEntryCount; + /** + * For FAT32 volumes, this field must be 0. + */ + uint16_t totalSectors16; + /** + * This dates back to the old MS-DOS 1.x media determination and is + * no longer usually used for anything. 0xF8 is the standard value + * for fixed (nonremovable) media. For removable media, 0xF0 is + * frequently used. Legal values are 0xF0 or 0xF8-0xFF. + */ + uint8_t mediaType; + /** + * On FAT32 volumes this field must be 0, and sectorsPerFat32 + * contains the FAT size count. + */ + uint16_t sectorsPerFat16; + /** Sectors per track for interrupt 0x13. Not used otherwise. */ + uint16_t sectorsPerTrack; + /** Number of heads for interrupt 0x13. Not used otherwise. */ + uint16_t headCount; + /** + * Count of hidden sectors preceding the partition that contains this + * FAT volume. This field is generally only relevant for media + * visible on interrupt 0x13. + */ + uint32_t hidddenSectors; + /** + * Contains the total number of sectors in the FAT32 volume. + */ + uint32_t totalSectors32; + /** + * Count of sectors occupied by one FAT on FAT32 volumes. + */ + uint32_t sectorsPerFat32; + /** + * This field is only defined for FAT32 media and does not exist on + * FAT12 and FAT16 media. + * Bits 0-3 -- Zero-based number of active FAT. + * Only valid if mirroring is disabled. + * Bits 4-6 -- Reserved. + * Bit 7 -- 0 means the FAT is mirrored at runtime into all FATs. + * -- 1 means only one FAT is active; it is the one referenced + * in bits 0-3. + * Bits 8-15 -- Reserved. + */ + uint16_t fat32Flags; + /** + * FAT32 version. High byte is major revision number. + * Low byte is minor revision number. Only 0.0 define. + */ + uint16_t fat32Version; + /** + * Cluster number of the first cluster of the root directory for FAT32. + * This usually 2 but not required to be 2. + */ + uint32_t fat32RootCluster; + /** + * Sector number of FSINFO structure in the reserved area of the + * FAT32 volume. Usually 1. + */ + uint16_t fat32FSInfo; + /** + * If nonzero, indicates the sector number in the reserved area + * of the volume of a copy of the boot record. Usually 6. + * No value other than 6 is recommended. + */ + uint16_t fat32BackBootBlock; + /** + * Reserved for future expansion. Code that formats FAT32 volumes + * should always set all of the bytes of this field to 0. + */ + uint8_t fat32Reserved[12]; + /** + * Related to the BIOS physical drive number. Floppy drives are + * identified as 0x00 and physical hard disks are identified as + * 0x80, regardless of the number of physical disk drives. + * Typically, this value is set prior to issuing an INT 13h BIOS + * call to specify the device to access. The value is only + * relevant if the device is a boot device. + */ + uint8_t driveNumber; + /** used by Windows NT - should be zero for FAT */ + uint8_t reserved1; + /** 0X29 if next three fields are valid */ + uint8_t bootSignature; + /** + * A random serial number created when formatting a disk, + * which helps to distinguish between disks. + * Usually generated by combining date and time. + */ + uint32_t volumeSerialNumber; + /** + * A field once used to store the volume label. The volume label + * is now stored as a special file in the root directory. + */ + char volumeLabel[11]; + /** + * A text field with a value of FAT32. + */ + char fileSystemType[8]; + /** X86 boot code */ + uint8_t bootCode[420]; + /** must be 0X55 */ + uint8_t bootSectorSig0; + /** must be 0XAA */ + uint8_t bootSectorSig1; +} PACKED; +/** Type name for FAT32 Boot Sector */ +typedef struct fat32_boot fat32_boot_t; +//------------------------------------------------------------------------------ +/** Lead signature for a FSINFO sector */ +uint32_t const FSINFO_LEAD_SIG = 0x41615252; +/** Struct signature for a FSINFO sector */ +uint32_t const FSINFO_STRUCT_SIG = 0x61417272; +/** + * \struct fat32_fsinfo + * + * \brief FSINFO sector for a FAT32 volume. + * + */ +struct fat32_fsinfo { + /** must be 0X52, 0X52, 0X61, 0X41 */ + uint32_t leadSignature; + /** must be zero */ + uint8_t reserved1[480]; + /** must be 0X72, 0X72, 0X41, 0X61 */ + uint32_t structSignature; + /** + * Contains the last known free cluster count on the volume. + * If the value is 0xFFFFFFFF, then the free count is unknown + * and must be computed. Any other value can be used, but is + * not necessarily correct. It should be range checked at least + * to make sure it is <= volume cluster count. + */ + uint32_t freeCount; + /** + * This is a hint for the FAT driver. It indicates the cluster + * number at which the driver should start looking for free clusters. + * If the value is 0xFFFFFFFF, then there is no hint and the driver + * should start looking at cluster 2. + */ + uint32_t nextFree; + /** must be zero */ + uint8_t reserved2[12]; + /** must be 0X00, 0X00, 0X55, 0XAA */ + uint8_t tailSignature[4]; +} PACKED; +/** Type name for FAT32 FSINFO Sector */ +typedef struct fat32_fsinfo fat32_fsinfo_t; +//------------------------------------------------------------------------------ +// End Of Chain values for FAT entries +/** FAT12 end of chain value used by Microsoft. */ +uint16_t const FAT12EOC = 0XFFF; +/** Minimum value for FAT12 EOC. Use to test for EOC. */ +uint16_t const FAT12EOC_MIN = 0XFF8; +/** FAT16 end of chain value used by Microsoft. */ +uint16_t const FAT16EOC = 0XFFFF; +/** Minimum value for FAT16 EOC. Use to test for EOC. */ +uint16_t const FAT16EOC_MIN = 0XFFF8; +/** FAT32 end of chain value used by Microsoft. */ +uint32_t const FAT32EOC = 0X0FFFFFFF; +/** Minimum value for FAT32 EOC. Use to test for EOC. */ +uint32_t const FAT32EOC_MIN = 0X0FFFFFF8; +/** Mask a for FAT32 entry. Entries are 28 bits. */ +uint32_t const FAT32MASK = 0X0FFFFFFF; +//------------------------------------------------------------------------------ +/** + * \struct directoryEntry + * \brief FAT short directory entry + * + * Short means short 8.3 name, not the entry size. + * + * Date Format. A FAT directory entry date stamp is a 16-bit field that is + * basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the + * format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the + * 16-bit word): + * + * Bits 9-15: Count of years from 1980, valid value range 0-127 + * inclusive (1980-2107). + * + * Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive. + * + * Bits 0-4: Day of month, valid value range 1-31 inclusive. + * + * Time Format. A FAT directory entry time stamp is a 16-bit field that has + * a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the + * 16-bit word, bit 15 is the MSB of the 16-bit word). + * + * Bits 11-15: Hours, valid value range 0-23 inclusive. + * + * Bits 5-10: Minutes, valid value range 0-59 inclusive. + * + * Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds). + * + * The valid time range is from Midnight 00:00:00 to 23:59:58. + */ +struct directoryEntry { + /** Short 8.3 name. + * + * The first eight bytes contain the file name with blank fill. + * The last three bytes contain the file extension with blank fill. + */ + uint8_t name[11]; + /** Entry attributes. + * + * The upper two bits of the attribute byte are reserved and should + * always be set to 0 when a file is created and never modified or + * looked at after that. See defines that begin with DIR_ATT_. + */ + uint8_t attributes; + /** + * Reserved for use by Windows NT. Set value to 0 when a file is + * created and never modify or look at it after that. + */ + uint8_t reservedNT; + /** + * The granularity of the seconds part of creationTime is 2 seconds + * so this field is a count of tenths of a second and its valid + * value range is 0-199 inclusive. (WHG note - seems to be hundredths) + */ + uint8_t creationTimeTenths; + /** Time file was created. */ + uint16_t creationTime; + /** Date file was created. */ + uint16_t creationDate; + /** + * Last access date. Note that there is no last access time, only + * a date. This is the date of last read or write. In the case of + * a write, this should be set to the same date as lastWriteDate. + */ + uint16_t lastAccessDate; + /** + * High word of this entry's first cluster number (always 0 for a + * FAT12 or FAT16 volume). + */ + uint16_t firstClusterHigh; + /** Time of last write. File creation is considered a write. */ + uint16_t lastWriteTime; + /** Date of last write. File creation is considered a write. */ + uint16_t lastWriteDate; + /** Low word of this entry's first cluster number. */ + uint16_t firstClusterLow; + /** 32-bit unsigned holding this file's size in bytes. */ + uint32_t fileSize; +} PACKED; +/** + * \struct directoryVFATEntry + * \brief VFAT long filename directory entry + * + * directoryVFATEntries are found in the same list as normal directoryEntry. + * But have the attribute field set to DIR_ATT_LONG_NAME. + * + * Long filenames are saved in multiple directoryVFATEntries. + * Each entry containing 13 UTF-16 characters. + */ +struct directoryVFATEntry { + /** + * Sequence number. Consists of 2 parts: + * bit 6: indicates first long filename block for the next file + * bit 0-4: the position of this long filename block (first block is 1) + */ + uint8_t sequenceNumber; + /** First set of UTF-16 characters */ + uint16_t name1[5];//UTF-16 + /** attributes (at the same location as in directoryEntry), always 0x0F */ + uint8_t attributes; + /** Reserved for use by Windows NT. Always 0. */ + uint8_t reservedNT; + /** Checksum of the short 8.3 filename, can be used to checked if the file system as modified by a not-long-filename aware implementation. */ + uint8_t checksum; + /** Second set of UTF-16 characters */ + uint16_t name2[6];//UTF-16 + /** firstClusterLow is always zero for longFilenames */ + uint16_t firstClusterLow; + /** Third set of UTF-16 characters */ + uint16_t name3[2];//UTF-16 +} PACKED; +//------------------------------------------------------------------------------ +// Definitions for directory entries +// +/** Type name for directoryEntry */ +typedef struct directoryEntry dir_t; +/** Type name for directoryVFATEntry */ +typedef struct directoryVFATEntry vfat_t; +/** escape for name[0] = 0XE5 */ +uint8_t const DIR_NAME_0XE5 = 0X05; +/** name[0] value for entry that is free after being "deleted" */ +uint8_t const DIR_NAME_DELETED = 0XE5; +/** name[0] value for entry that is free and no allocated entries follow */ +uint8_t const DIR_NAME_FREE = 0X00; +/** file is read-only */ +uint8_t const DIR_ATT_READ_ONLY = 0X01; +/** File should hidden in directory listings */ +uint8_t const DIR_ATT_HIDDEN = 0X02; +/** Entry is for a system file */ +uint8_t const DIR_ATT_SYSTEM = 0X04; +/** Directory entry contains the volume label */ +uint8_t const DIR_ATT_VOLUME_ID = 0X08; +/** Entry is for a directory */ +uint8_t const DIR_ATT_DIRECTORY = 0X10; +/** Old DOS archive bit for backup support */ +uint8_t const DIR_ATT_ARCHIVE = 0X20; +/** Test value for long name entry. Test is + (d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME. */ +uint8_t const DIR_ATT_LONG_NAME = 0X0F; +/** Test mask for long name entry */ +uint8_t const DIR_ATT_LONG_NAME_MASK = 0X3F; +/** defined attribute bits */ +uint8_t const DIR_ATT_DEFINED_BITS = 0X3F; +/** Directory entry is part of a long name + * \param[in] dir Pointer to a directory entry. + * + * \return true if the entry is for part of a long name else false. + */ +static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) { + return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME; +} +/** Mask for file/subdirectory tests */ +uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY); +/** Directory entry is for a file + * \param[in] dir Pointer to a directory entry. + * + * \return true if the entry is for a normal file else false. + */ +static inline uint8_t DIR_IS_FILE(const dir_t* dir) { + return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0; +} +/** Directory entry is for a subdirectory + * \param[in] dir Pointer to a directory entry. + * + * \return true if the entry is for a subdirectory else false. + */ +static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) { + return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY; +} +/** Directory entry is for a file or subdirectory + * \param[in] dir Pointer to a directory entry. + * + * \return true if the entry is for a normal file or subdirectory else false. + */ +static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) { + return (dir->attributes & DIR_ATT_VOLUME_ID) == 0; +} +#endif // SdFatStructs_h + + +#endif diff --git a/Marlin/Marlin/SdFatUtil.cpp b/Marlin/Marlin/SdFatUtil.cpp new file mode 100644 index 0000000000..1187ec5393 --- /dev/null +++ b/Marlin/Marlin/SdFatUtil.cpp @@ -0,0 +1,79 @@ +/* Arduino SdFat Library + * Copyright (C) 2008 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +#include "Marlin.h" + +#ifdef SDSUPPORT +#include "SdFatUtil.h" + +//------------------------------------------------------------------------------ +/** Amount of free RAM + * \return The number of free bytes. + */ +int SdFatUtil::FreeRam() { + extern int __bss_end; + extern int* __brkval; + int free_memory; + if (reinterpret_cast(__brkval) == 0) { + // if no heap use from end of bss section + free_memory = reinterpret_cast(&free_memory) + - reinterpret_cast(&__bss_end); + } else { + // use from top of stack to heap + free_memory = reinterpret_cast(&free_memory) + - reinterpret_cast(__brkval); + } + return free_memory; +} +//------------------------------------------------------------------------------ +/** %Print a string in flash memory. + * + * \param[in] pr Print object for output. + * \param[in] str Pointer to string stored in flash memory. + */ +void SdFatUtil::print_P( PGM_P str) { + for (uint8_t c; (c = pgm_read_byte(str)); str++) MYSERIAL.write(c); +} +//------------------------------------------------------------------------------ +/** %Print a string in flash memory followed by a CR/LF. + * + * \param[in] pr Print object for output. + * \param[in] str Pointer to string stored in flash memory. + */ +void SdFatUtil::println_P( PGM_P str) { + print_P( str); + MYSERIAL.println(); +} +//------------------------------------------------------------------------------ +/** %Print a string in flash memory to Serial. + * + * \param[in] str Pointer to string stored in flash memory. + */ +void SdFatUtil::SerialPrint_P(PGM_P str) { + print_P(str); +} +//------------------------------------------------------------------------------ +/** %Print a string in flash memory to Serial followed by a CR/LF. + * + * \param[in] str Pointer to string stored in flash memory. + */ +void SdFatUtil::SerialPrintln_P(PGM_P str) { + println_P( str); +} +#endif diff --git a/Marlin/Marlin/SdFatUtil.h b/Marlin/Marlin/SdFatUtil.h new file mode 100644 index 0000000000..7f1809422b --- /dev/null +++ b/Marlin/Marlin/SdFatUtil.h @@ -0,0 +1,48 @@ +/* Arduino SdFat Library + * Copyright (C) 2008 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +#include "Marlin.h" +#ifdef SDSUPPORT + +#ifndef SdFatUtil_h +#define SdFatUtil_h +/** + * \file + * \brief Useful utility functions. + */ +#include "Marlin.h" +#include "MarlinSerial.h" +/** Store and print a string in flash memory.*/ +#define PgmPrint(x) SerialPrint_P(PSTR(x)) +/** Store and print a string in flash memory followed by a CR/LF.*/ +#define PgmPrintln(x) SerialPrintln_P(PSTR(x)) + +namespace SdFatUtil { + int FreeRam(); + void print_P( PGM_P str); + void println_P( PGM_P str); + void SerialPrint_P(PGM_P str); + void SerialPrintln_P(PGM_P str); +} + +using namespace SdFatUtil; // NOLINT +#endif // #define SdFatUtil_h + + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/SdFile.cpp b/Marlin/Marlin/SdFile.cpp new file mode 100644 index 0000000000..e9439e3b50 --- /dev/null +++ b/Marlin/Marlin/SdFile.cpp @@ -0,0 +1,92 @@ +/* Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +#include "Marlin.h" + +#ifdef SDSUPPORT +#include "SdFile.h" +/** Create a file object and open it in the current working directory. + * + * \param[in] path A path with a valid 8.3 DOS name for a file to be opened. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t). + */ +SdFile::SdFile(const char* path, uint8_t oflag) : SdBaseFile(path, oflag) { +} +//------------------------------------------------------------------------------ +/** Write data to an open file. + * + * \note Data is moved to the cache but may not be written to the + * storage device until sync() is called. + * + * \param[in] buf Pointer to the location of the data to be written. + * + * \param[in] nbyte Number of bytes to write. + * + * \return For success write() returns the number of bytes written, always + * \a nbyte. If an error occurs, write() returns -1. Possible errors + * include write() is called before a file has been opened, write is called + * for a read-only file, device is full, a corrupt file system or an I/O error. + * + */ +int16_t SdFile::write(const void* buf, uint16_t nbyte) { + return SdBaseFile::write(buf, nbyte); +} +//------------------------------------------------------------------------------ +/** Write a byte to a file. Required by the Arduino Print class. + * \param[in] b the byte to be written. + * Use writeError to check for errors. + */ +#if ARDUINO >= 100 + size_t SdFile::write(uint8_t b) +#else + void SdFile::write(uint8_t b) +#endif +{ + SdBaseFile::write(&b, 1); +} +//------------------------------------------------------------------------------ +/** Write a string to a file. Used by the Arduino Print class. + * \param[in] str Pointer to the string. + * Use writeError to check for errors. + */ +void SdFile::write(const char* str) { + SdBaseFile::write(str, strlen(str)); +} +//------------------------------------------------------------------------------ +/** Write a PROGMEM string to a file. + * \param[in] str Pointer to the PROGMEM string. + * Use writeError to check for errors. + */ +void SdFile::write_P(PGM_P str) { + for (uint8_t c; (c = pgm_read_byte(str)); str++) write(c); +} +//------------------------------------------------------------------------------ +/** Write a PROGMEM string followed by CR/LF to a file. + * \param[in] str Pointer to the PROGMEM string. + * Use writeError to check for errors. + */ +void SdFile::writeln_P(PGM_P str) { + write_P(str); + write_P(PSTR("\r\n")); +} + + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/SdFile.h b/Marlin/Marlin/SdFile.h new file mode 100644 index 0000000000..cbf1bbdbd9 --- /dev/null +++ b/Marlin/Marlin/SdFile.h @@ -0,0 +1,54 @@ +/* Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +/** + * \file + * \brief SdFile class + */ +#include "Marlin.h" + +#ifdef SDSUPPORT +#include "SdBaseFile.h" +#include +#ifndef SdFile_h +#define SdFile_h +//------------------------------------------------------------------------------ +/** + * \class SdFile + * \brief SdBaseFile with Print. + */ +class SdFile : public SdBaseFile, public Print { + public: + SdFile() {} + SdFile(const char* name, uint8_t oflag); + #if ARDUINO >= 100 + size_t write(uint8_t b); + #else + void write(uint8_t b); + #endif + + int16_t write(const void* buf, uint16_t nbyte); + void write(const char* str); + void write_P(PGM_P str); + void writeln_P(PGM_P str); +}; +#endif // SdFile_h + + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/SdInfo.h b/Marlin/Marlin/SdInfo.h new file mode 100644 index 0000000000..03ece10224 --- /dev/null +++ b/Marlin/Marlin/SdInfo.h @@ -0,0 +1,280 @@ +/* Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino Sd2Card Library. If not, see + * . + */ +#include "Marlin.h" +#ifdef SDSUPPORT + +#ifndef SdInfo_h +#define SdInfo_h +#include +// Based on the document: +// +// SD Specifications +// Part 1 +// Physical Layer +// Simplified Specification +// Version 3.01 +// May 18, 2010 +// +// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs +//------------------------------------------------------------------------------ +// SD card commands +/** GO_IDLE_STATE - init card in spi mode if CS low */ +uint8_t const CMD0 = 0X00; +/** SEND_IF_COND - verify SD Memory Card interface operating condition.*/ +uint8_t const CMD8 = 0X08; +/** SEND_CSD - read the Card Specific Data (CSD register) */ +uint8_t const CMD9 = 0X09; +/** SEND_CID - read the card identification information (CID register) */ +uint8_t const CMD10 = 0X0A; +/** STOP_TRANSMISSION - end multiple block read sequence */ +uint8_t const CMD12 = 0X0C; +/** SEND_STATUS - read the card status register */ +uint8_t const CMD13 = 0X0D; +/** READ_SINGLE_BLOCK - read a single data block from the card */ +uint8_t const CMD17 = 0X11; +/** READ_MULTIPLE_BLOCK - read a multiple data blocks from the card */ +uint8_t const CMD18 = 0X12; +/** WRITE_BLOCK - write a single data block to the card */ +uint8_t const CMD24 = 0X18; +/** WRITE_MULTIPLE_BLOCK - write blocks of data until a STOP_TRANSMISSION */ +uint8_t const CMD25 = 0X19; +/** ERASE_WR_BLK_START - sets the address of the first block to be erased */ +uint8_t const CMD32 = 0X20; +/** ERASE_WR_BLK_END - sets the address of the last block of the continuous + range to be erased*/ +uint8_t const CMD33 = 0X21; +/** ERASE - erase all previously selected blocks */ +uint8_t const CMD38 = 0X26; +/** APP_CMD - escape for application specific command */ +uint8_t const CMD55 = 0X37; +/** READ_OCR - read the OCR register of a card */ +uint8_t const CMD58 = 0X3A; +/** SET_WR_BLK_ERASE_COUNT - Set the number of write blocks to be + pre-erased before writing */ +uint8_t const ACMD23 = 0X17; +/** SD_SEND_OP_COMD - Sends host capacity support information and + activates the card's initialization process */ +uint8_t const ACMD41 = 0X29; +//------------------------------------------------------------------------------ +/** status for card in the ready state */ +uint8_t const R1_READY_STATE = 0X00; +/** status for card in the idle state */ +uint8_t const R1_IDLE_STATE = 0X01; +/** status bit for illegal command */ +uint8_t const R1_ILLEGAL_COMMAND = 0X04; +/** start data token for read or write single block*/ +uint8_t const DATA_START_BLOCK = 0XFE; +/** stop token for write multiple blocks*/ +uint8_t const STOP_TRAN_TOKEN = 0XFD; +/** start data token for write multiple blocks*/ +uint8_t const WRITE_MULTIPLE_TOKEN = 0XFC; +/** mask for data response tokens after a write block operation */ +uint8_t const DATA_RES_MASK = 0X1F; +/** write data accepted token */ +uint8_t const DATA_RES_ACCEPTED = 0X05; +//------------------------------------------------------------------------------ +/** Card IDentification (CID) register */ +typedef struct CID { + // byte 0 + /** Manufacturer ID */ + unsigned char mid; + // byte 1-2 + /** OEM/Application ID */ + char oid[2]; + // byte 3-7 + /** Product name */ + char pnm[5]; + // byte 8 + /** Product revision least significant digit */ + unsigned char prv_m : 4; + /** Product revision most significant digit */ + unsigned char prv_n : 4; + // byte 9-12 + /** Product serial number */ + uint32_t psn; + // byte 13 + /** Manufacturing date year low digit */ + unsigned char mdt_year_high : 4; + /** not used */ + unsigned char reserved : 4; + // byte 14 + /** Manufacturing date month */ + unsigned char mdt_month : 4; + /** Manufacturing date year low digit */ + unsigned char mdt_year_low :4; + // byte 15 + /** not used always 1 */ + unsigned char always1 : 1; + /** CRC7 checksum */ + unsigned char crc : 7; +}cid_t; +//------------------------------------------------------------------------------ +/** CSD for version 1.00 cards */ +typedef struct CSDV1 { + // byte 0 + unsigned char reserved1 : 6; + unsigned char csd_ver : 2; + // byte 1 + unsigned char taac; + // byte 2 + unsigned char nsac; + // byte 3 + unsigned char tran_speed; + // byte 4 + unsigned char ccc_high; + // byte 5 + unsigned char read_bl_len : 4; + unsigned char ccc_low : 4; + // byte 6 + unsigned char c_size_high : 2; + unsigned char reserved2 : 2; + unsigned char dsr_imp : 1; + unsigned char read_blk_misalign :1; + unsigned char write_blk_misalign : 1; + unsigned char read_bl_partial : 1; + // byte 7 + unsigned char c_size_mid; + // byte 8 + unsigned char vdd_r_curr_max : 3; + unsigned char vdd_r_curr_min : 3; + unsigned char c_size_low :2; + // byte 9 + unsigned char c_size_mult_high : 2; + unsigned char vdd_w_cur_max : 3; + unsigned char vdd_w_curr_min : 3; + // byte 10 + unsigned char sector_size_high : 6; + unsigned char erase_blk_en : 1; + unsigned char c_size_mult_low : 1; + // byte 11 + unsigned char wp_grp_size : 7; + unsigned char sector_size_low : 1; + // byte 12 + unsigned char write_bl_len_high : 2; + unsigned char r2w_factor : 3; + unsigned char reserved3 : 2; + unsigned char wp_grp_enable : 1; + // byte 13 + unsigned char reserved4 : 5; + unsigned char write_partial : 1; + unsigned char write_bl_len_low : 2; + // byte 14 + unsigned char reserved5: 2; + unsigned char file_format : 2; + unsigned char tmp_write_protect : 1; + unsigned char perm_write_protect : 1; + unsigned char copy : 1; + /** Indicates the file format on the card */ + unsigned char file_format_grp : 1; + // byte 15 + unsigned char always1 : 1; + unsigned char crc : 7; +}csd1_t; +//------------------------------------------------------------------------------ +/** CSD for version 2.00 cards */ +typedef struct CSDV2 { + // byte 0 + unsigned char reserved1 : 6; + unsigned char csd_ver : 2; + // byte 1 + /** fixed to 0X0E */ + unsigned char taac; + // byte 2 + /** fixed to 0 */ + unsigned char nsac; + // byte 3 + unsigned char tran_speed; + // byte 4 + unsigned char ccc_high; + // byte 5 + /** This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte */ + unsigned char read_bl_len : 4; + unsigned char ccc_low : 4; + // byte 6 + /** not used */ + unsigned char reserved2 : 4; + unsigned char dsr_imp : 1; + /** fixed to 0 */ + unsigned char read_blk_misalign :1; + /** fixed to 0 */ + unsigned char write_blk_misalign : 1; + /** fixed to 0 - no partial read */ + unsigned char read_bl_partial : 1; + // byte 7 + /** not used */ + unsigned char reserved3 : 2; + /** high part of card size */ + unsigned char c_size_high : 6; + // byte 8 + /** middle part of card size */ + unsigned char c_size_mid; + // byte 9 + /** low part of card size */ + unsigned char c_size_low; + // byte 10 + /** sector size is fixed at 64 KB */ + unsigned char sector_size_high : 6; + /** fixed to 1 - erase single is supported */ + unsigned char erase_blk_en : 1; + /** not used */ + unsigned char reserved4 : 1; + // byte 11 + unsigned char wp_grp_size : 7; + /** sector size is fixed at 64 KB */ + unsigned char sector_size_low : 1; + // byte 12 + /** write_bl_len fixed for 512 byte blocks */ + unsigned char write_bl_len_high : 2; + /** fixed value of 2 */ + unsigned char r2w_factor : 3; + /** not used */ + unsigned char reserved5 : 2; + /** fixed value of 0 - no write protect groups */ + unsigned char wp_grp_enable : 1; + // byte 13 + unsigned char reserved6 : 5; + /** always zero - no partial block read*/ + unsigned char write_partial : 1; + /** write_bl_len fixed for 512 byte blocks */ + unsigned char write_bl_len_low : 2; + // byte 14 + unsigned char reserved7: 2; + /** Do not use always 0 */ + unsigned char file_format : 2; + unsigned char tmp_write_protect : 1; + unsigned char perm_write_protect : 1; + unsigned char copy : 1; + /** Do not use always 0 */ + unsigned char file_format_grp : 1; + // byte 15 + /** not used always 1 */ + unsigned char always1 : 1; + /** checksum */ + unsigned char crc : 7; +}csd2_t; +//------------------------------------------------------------------------------ +/** union of old and new style CSD register */ +union csd_t { + csd1_t v1; + csd2_t v2; +}; +#endif // SdInfo_h + +#endif \ No newline at end of file diff --git a/Marlin/Marlin/SdVolume.cpp b/Marlin/Marlin/SdVolume.cpp new file mode 100644 index 0000000000..f14d7bc70b --- /dev/null +++ b/Marlin/Marlin/SdVolume.cpp @@ -0,0 +1,405 @@ +/* Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +#include "Marlin.h" +#ifdef SDSUPPORT + +#include "SdVolume.h" +//------------------------------------------------------------------------------ +#if !USE_MULTIPLE_CARDS +// raw block cache +uint32_t SdVolume::cacheBlockNumber_; // current block number +cache_t SdVolume::cacheBuffer_; // 512 byte cache for Sd2Card +Sd2Card* SdVolume::sdCard_; // pointer to SD card object +bool SdVolume::cacheDirty_; // cacheFlush() will write block if true +uint32_t SdVolume::cacheMirrorBlock_; // mirror block for second FAT +#endif // USE_MULTIPLE_CARDS +//------------------------------------------------------------------------------ +// find a contiguous group of clusters +bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) { + // start of group + uint32_t bgnCluster; + // end of group + uint32_t endCluster; + // last cluster of FAT + uint32_t fatEnd = clusterCount_ + 1; + + // flag to save place to start next search + bool setStart; + + // set search start cluster + if (*curCluster) { + // try to make file contiguous + bgnCluster = *curCluster + 1; + + // don't save new start location + setStart = false; + } else { + // start at likely place for free cluster + bgnCluster = allocSearchStart_; + + // save next search start if one cluster + setStart = count == 1; + } + // end of group + endCluster = bgnCluster; + + // search the FAT for free clusters + for (uint32_t n = 0;; n++, endCluster++) { + // can't find space checked all clusters + if (n >= clusterCount_) goto fail; + + // past end - start from beginning of FAT + if (endCluster > fatEnd) { + bgnCluster = endCluster = 2; + } + uint32_t f; + if (!fatGet(endCluster, &f)) goto fail; + + if (f != 0) { + // cluster in use try next cluster as bgnCluster + bgnCluster = endCluster + 1; + } else if ((endCluster - bgnCluster + 1) == count) { + // done - found space + break; + } + } + // mark end of chain + if (!fatPutEOC(endCluster)) goto fail; + + // link clusters + while (endCluster > bgnCluster) { + if (!fatPut(endCluster - 1, endCluster)) goto fail; + endCluster--; + } + if (*curCluster != 0) { + // connect chains + if (!fatPut(*curCluster, bgnCluster)) goto fail; + } + // return first cluster number to caller + *curCluster = bgnCluster; + + // remember possible next free cluster + if (setStart) allocSearchStart_ = bgnCluster + 1; + + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +bool SdVolume::cacheFlush() { + if (cacheDirty_) { + if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data)) { + goto fail; + } + // mirror FAT tables + if (cacheMirrorBlock_) { + if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data)) { + goto fail; + } + cacheMirrorBlock_ = 0; + } + cacheDirty_ = 0; + } + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +bool SdVolume::cacheRawBlock(uint32_t blockNumber, bool dirty) { + if (cacheBlockNumber_ != blockNumber) { + if (!cacheFlush()) goto fail; + if (!sdCard_->readBlock(blockNumber, cacheBuffer_.data)) goto fail; + cacheBlockNumber_ = blockNumber; + } + if (dirty) cacheDirty_ = true; + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +// return the size in bytes of a cluster chain +bool SdVolume::chainSize(uint32_t cluster, uint32_t* size) { + uint32_t s = 0; + do { + if (!fatGet(cluster, &cluster)) goto fail; + s += 512UL << clusterSizeShift_; + } while (!isEOC(cluster)); + *size = s; + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +// Fetch a FAT entry +bool SdVolume::fatGet(uint32_t cluster, uint32_t* value) { + uint32_t lba; + if (cluster > (clusterCount_ + 1)) goto fail; + if (FAT12_SUPPORT && fatType_ == 12) { + uint16_t index = cluster; + index += index >> 1; + lba = fatStartBlock_ + (index >> 9); + if (!cacheRawBlock(lba, CACHE_FOR_READ)) goto fail; + index &= 0X1FF; + uint16_t tmp = cacheBuffer_.data[index]; + index++; + if (index == 512) { + if (!cacheRawBlock(lba + 1, CACHE_FOR_READ)) goto fail; + index = 0; + } + tmp |= cacheBuffer_.data[index] << 8; + *value = cluster & 1 ? tmp >> 4 : tmp & 0XFFF; + return true; + } + if (fatType_ == 16) { + lba = fatStartBlock_ + (cluster >> 8); + } else if (fatType_ == 32) { + lba = fatStartBlock_ + (cluster >> 7); + } else { + goto fail; + } + if (lba != cacheBlockNumber_) { + if (!cacheRawBlock(lba, CACHE_FOR_READ)) goto fail; + } + if (fatType_ == 16) { + *value = cacheBuffer_.fat16[cluster & 0XFF]; + } else { + *value = cacheBuffer_.fat32[cluster & 0X7F] & FAT32MASK; + } + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +// Store a FAT entry +bool SdVolume::fatPut(uint32_t cluster, uint32_t value) { + uint32_t lba; + // error if reserved cluster + if (cluster < 2) goto fail; + + // error if not in FAT + if (cluster > (clusterCount_ + 1)) goto fail; + + if (FAT12_SUPPORT && fatType_ == 12) { + uint16_t index = cluster; + index += index >> 1; + lba = fatStartBlock_ + (index >> 9); + if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail; + // mirror second FAT + if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_; + index &= 0X1FF; + uint8_t tmp = value; + if (cluster & 1) { + tmp = (cacheBuffer_.data[index] & 0XF) | tmp << 4; + } + cacheBuffer_.data[index] = tmp; + index++; + if (index == 512) { + lba++; + index = 0; + if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail; + // mirror second FAT + if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_; + } + tmp = value >> 4; + if (!(cluster & 1)) { + tmp = ((cacheBuffer_.data[index] & 0XF0)) | tmp >> 4; + } + cacheBuffer_.data[index] = tmp; + return true; + } + if (fatType_ == 16) { + lba = fatStartBlock_ + (cluster >> 8); + } else if (fatType_ == 32) { + lba = fatStartBlock_ + (cluster >> 7); + } else { + goto fail; + } + if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail; + // store entry + if (fatType_ == 16) { + cacheBuffer_.fat16[cluster & 0XFF] = value; + } else { + cacheBuffer_.fat32[cluster & 0X7F] = value; + } + // mirror second FAT + if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_; + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +// free a cluster chain +bool SdVolume::freeChain(uint32_t cluster) { + uint32_t next; + + // clear free cluster location + allocSearchStart_ = 2; + + do { + if (!fatGet(cluster, &next)) goto fail; + + // free cluster + if (!fatPut(cluster, 0)) goto fail; + + cluster = next; + } while (!isEOC(cluster)); + + return true; + + fail: + return false; +} +//------------------------------------------------------------------------------ +/** Volume free space in clusters. + * + * \return Count of free clusters for success or -1 if an error occurs. + */ +int32_t SdVolume::freeClusterCount() { + uint32_t free = 0; + uint16_t n; + uint32_t todo = clusterCount_ + 2; + + if (fatType_ == 16) { + n = 256; + } else if (fatType_ == 32) { + n = 128; + } else { + // put FAT12 here + return -1; + } + + for (uint32_t lba = fatStartBlock_; todo; todo -= n, lba++) { + if (!cacheRawBlock(lba, CACHE_FOR_READ)) return -1; + if (todo < n) n = todo; + if (fatType_ == 16) { + for (uint16_t i = 0; i < n; i++) { + if (cacheBuffer_.fat16[i] == 0) free++; + } + } else { + for (uint16_t i = 0; i < n; i++) { + if (cacheBuffer_.fat32[i] == 0) free++; + } + } + } + return free; +} +//------------------------------------------------------------------------------ +/** Initialize a FAT volume. + * + * \param[in] dev The SD card where the volume is located. + * + * \param[in] part The partition to be used. Legal values for \a part are + * 1-4 to use the corresponding partition on a device formatted with + * a MBR, Master Boot Record, or zero if the device is formatted as + * a super floppy with the FAT boot sector in block zero. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. Reasons for + * failure include not finding a valid partition, not finding a valid + * FAT file system in the specified partition or an I/O error. + */ +bool SdVolume::init(Sd2Card* dev, uint8_t part) { + uint32_t totalBlocks; + uint32_t volumeStartBlock = 0; + fat32_boot_t* fbs; + + sdCard_ = dev; + fatType_ = 0; + allocSearchStart_ = 2; + cacheDirty_ = 0; // cacheFlush() will write block if true + cacheMirrorBlock_ = 0; + cacheBlockNumber_ = 0XFFFFFFFF; + + // if part == 0 assume super floppy with FAT boot sector in block zero + // if part > 0 assume mbr volume with partition table + if (part) { + if (part > 4)goto fail; + if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) goto fail; + part_t* p = &cacheBuffer_.mbr.part[part-1]; + if ((p->boot & 0X7F) !=0 || + p->totalSectors < 100 || + p->firstSector == 0) { + // not a valid partition + goto fail; + } + volumeStartBlock = p->firstSector; + } + if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) goto fail; + fbs = &cacheBuffer_.fbs32; + if (fbs->bytesPerSector != 512 || + fbs->fatCount == 0 || + fbs->reservedSectorCount == 0 || + fbs->sectorsPerCluster == 0) { + // not valid FAT volume + goto fail; + } + fatCount_ = fbs->fatCount; + blocksPerCluster_ = fbs->sectorsPerCluster; + // determine shift that is same as multiply by blocksPerCluster_ + clusterSizeShift_ = 0; + while (blocksPerCluster_ != (1 << clusterSizeShift_)) { + // error if not power of 2 + if (clusterSizeShift_++ > 7) goto fail; + } + blocksPerFat_ = fbs->sectorsPerFat16 ? + fbs->sectorsPerFat16 : fbs->sectorsPerFat32; + + fatStartBlock_ = volumeStartBlock + fbs->reservedSectorCount; + + // count for FAT16 zero for FAT32 + rootDirEntryCount_ = fbs->rootDirEntryCount; + + // directory start for FAT16 dataStart for FAT32 + rootDirStart_ = fatStartBlock_ + fbs->fatCount * blocksPerFat_; + + // data start for FAT16 and FAT32 + dataStartBlock_ = rootDirStart_ + ((32 * fbs->rootDirEntryCount + 511)/512); + + // total blocks for FAT16 or FAT32 + totalBlocks = fbs->totalSectors16 ? + fbs->totalSectors16 : fbs->totalSectors32; + // total data blocks + clusterCount_ = totalBlocks - (dataStartBlock_ - volumeStartBlock); + + // divide by cluster size to get cluster count + clusterCount_ >>= clusterSizeShift_; + + // FAT type is determined by cluster count + if (clusterCount_ < 4085) { + fatType_ = 12; + if (!FAT12_SUPPORT) goto fail; + } else if (clusterCount_ < 65525) { + fatType_ = 16; + } else { + rootDirStart_ = fbs->fat32RootCluster; + fatType_ = 32; + } + return true; + + fail: + return false; +} +#endif \ No newline at end of file diff --git a/Marlin/Marlin/SdVolume.h b/Marlin/Marlin/SdVolume.h new file mode 100644 index 0000000000..2ff2b6eb96 --- /dev/null +++ b/Marlin/Marlin/SdVolume.h @@ -0,0 +1,214 @@ +/* Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino SdFat Library + * + * This Library is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Arduino SdFat Library. If not, see + * . + */ +#include "Marlin.h" +#ifdef SDSUPPORT +#ifndef SdVolume_h +#define SdVolume_h +/** + * \file + * \brief SdVolume class + */ +#include "SdFatConfig.h" +#include "Sd2Card.h" +#include "SdFatStructs.h" + +//============================================================================== +// SdVolume class +/** + * \brief Cache for an SD data block + */ +union cache_t { + /** Used to access cached file data blocks. */ + uint8_t data[512]; + /** Used to access cached FAT16 entries. */ + uint16_t fat16[256]; + /** Used to access cached FAT32 entries. */ + uint32_t fat32[128]; + /** Used to access cached directory entries. */ + dir_t dir[16]; + /** Used to access a cached Master Boot Record. */ + mbr_t mbr; + /** Used to access to a cached FAT boot sector. */ + fat_boot_t fbs; + /** Used to access to a cached FAT32 boot sector. */ + fat32_boot_t fbs32; + /** Used to access to a cached FAT32 FSINFO sector. */ + fat32_fsinfo_t fsinfo; +}; +//------------------------------------------------------------------------------ +/** + * \class SdVolume + * \brief Access FAT16 and FAT32 volumes on SD and SDHC cards. + */ +class SdVolume { + public: + /** Create an instance of SdVolume */ + SdVolume() : fatType_(0) {} + /** Clear the cache and returns a pointer to the cache. Used by the WaveRP + * recorder to do raw write to the SD card. Not for normal apps. + * \return A pointer to the cache buffer or zero if an error occurs. + */ + cache_t* cacheClear() { + if (!cacheFlush()) return 0; + cacheBlockNumber_ = 0XFFFFFFFF; + return &cacheBuffer_; + } + /** Initialize a FAT volume. Try partition one first then try super + * floppy format. + * + * \param[in] dev The Sd2Card where the volume is located. + * + * \return The value one, true, is returned for success and + * the value zero, false, is returned for failure. Reasons for + * failure include not finding a valid partition, not finding a valid + * FAT file system or an I/O error. + */ + bool init(Sd2Card* dev) { return init(dev, 1) ? true : init(dev, 0);} + bool init(Sd2Card* dev, uint8_t part); + + // inline functions that return volume info + /** \return The volume's cluster size in blocks. */ + uint8_t blocksPerCluster() const {return blocksPerCluster_;} + /** \return The number of blocks in one FAT. */ + uint32_t blocksPerFat() const {return blocksPerFat_;} + /** \return The total number of clusters in the volume. */ + uint32_t clusterCount() const {return clusterCount_;} + /** \return The shift count required to multiply by blocksPerCluster. */ + uint8_t clusterSizeShift() const {return clusterSizeShift_;} + /** \return The logical block number for the start of file data. */ + uint32_t dataStartBlock() const {return dataStartBlock_;} + /** \return The number of FAT structures on the volume. */ + uint8_t fatCount() const {return fatCount_;} + /** \return The logical block number for the start of the first FAT. */ + uint32_t fatStartBlock() const {return fatStartBlock_;} + /** \return The FAT type of the volume. Values are 12, 16 or 32. */ + uint8_t fatType() const {return fatType_;} + int32_t freeClusterCount(); + /** \return The number of entries in the root directory for FAT16 volumes. */ + uint32_t rootDirEntryCount() const {return rootDirEntryCount_;} + /** \return The logical block number for the start of the root directory + on FAT16 volumes or the first cluster number on FAT32 volumes. */ + uint32_t rootDirStart() const {return rootDirStart_;} + /** Sd2Card object for this volume + * \return pointer to Sd2Card object. + */ + Sd2Card* sdCard() {return sdCard_;} + /** Debug access to FAT table + * + * \param[in] n cluster number. + * \param[out] v value of entry + * \return true for success or false for failure + */ + bool dbgFat(uint32_t n, uint32_t* v) {return fatGet(n, v);} +//------------------------------------------------------------------------------ + private: + // Allow SdBaseFile access to SdVolume private data. + friend class SdBaseFile; + + // value for dirty argument in cacheRawBlock to indicate read from cache + static bool const CACHE_FOR_READ = false; + // value for dirty argument in cacheRawBlock to indicate write to cache + static bool const CACHE_FOR_WRITE = true; + +#if USE_MULTIPLE_CARDS + cache_t cacheBuffer_; // 512 byte cache for device blocks + uint32_t cacheBlockNumber_; // Logical number of block in the cache + Sd2Card* sdCard_; // Sd2Card object for cache + bool cacheDirty_; // cacheFlush() will write block if true + uint32_t cacheMirrorBlock_; // block number for mirror FAT +#else // USE_MULTIPLE_CARDS + static cache_t cacheBuffer_; // 512 byte cache for device blocks + static uint32_t cacheBlockNumber_; // Logical number of block in the cache + static Sd2Card* sdCard_; // Sd2Card object for cache + static bool cacheDirty_; // cacheFlush() will write block if true + static uint32_t cacheMirrorBlock_; // block number for mirror FAT +#endif // USE_MULTIPLE_CARDS + uint32_t allocSearchStart_; // start cluster for alloc search + uint8_t blocksPerCluster_; // cluster size in blocks + uint32_t blocksPerFat_; // FAT size in blocks + uint32_t clusterCount_; // clusters in one FAT + uint8_t clusterSizeShift_; // shift to convert cluster count to block count + uint32_t dataStartBlock_; // first data block number + uint8_t fatCount_; // number of FATs on volume + uint32_t fatStartBlock_; // start block for first FAT + uint8_t fatType_; // volume type (12, 16, OR 32) + uint16_t rootDirEntryCount_; // number of entries in FAT16 root dir + uint32_t rootDirStart_; // root start block for FAT16, cluster for FAT32 + //---------------------------------------------------------------------------- + bool allocContiguous(uint32_t count, uint32_t* curCluster); + uint8_t blockOfCluster(uint32_t position) const { + return (position >> 9) & (blocksPerCluster_ - 1);} + uint32_t clusterStartBlock(uint32_t cluster) const { + return dataStartBlock_ + ((cluster - 2) << clusterSizeShift_);} + uint32_t blockNumber(uint32_t cluster, uint32_t position) const { + return clusterStartBlock(cluster) + blockOfCluster(position);} + cache_t *cache() {return &cacheBuffer_;} + uint32_t cacheBlockNumber() {return cacheBlockNumber_;} +#if USE_MULTIPLE_CARDS + bool cacheFlush(); + bool cacheRawBlock(uint32_t blockNumber, bool dirty); +#else // USE_MULTIPLE_CARDS + static bool cacheFlush(); + static bool cacheRawBlock(uint32_t blockNumber, bool dirty); +#endif // USE_MULTIPLE_CARDS + // used by SdBaseFile write to assign cache to SD location + void cacheSetBlockNumber(uint32_t blockNumber, bool dirty) { + cacheDirty_ = dirty; + cacheBlockNumber_ = blockNumber; + } + void cacheSetDirty() {cacheDirty_ |= CACHE_FOR_WRITE;} + bool chainSize(uint32_t beginCluster, uint32_t* size); + bool fatGet(uint32_t cluster, uint32_t* value); + bool fatPut(uint32_t cluster, uint32_t value); + bool fatPutEOC(uint32_t cluster) { + return fatPut(cluster, 0x0FFFFFFF); + } + bool freeChain(uint32_t cluster); + bool isEOC(uint32_t cluster) const { + if (FAT12_SUPPORT && fatType_ == 12) return cluster >= FAT12EOC_MIN; + if (fatType_ == 16) return cluster >= FAT16EOC_MIN; + return cluster >= FAT32EOC_MIN; + } + bool readBlock(uint32_t block, uint8_t* dst) { + return sdCard_->readBlock(block, dst);} + bool writeBlock(uint32_t block, const uint8_t* dst) { + return sdCard_->writeBlock(block, dst); + } +//------------------------------------------------------------------------------ + // Deprecated functions - suppress cpplint warnings with NOLINT comment +#if ALLOW_DEPRECATED_FUNCTIONS && !defined(DOXYGEN) + public: + /** \deprecated Use: bool SdVolume::init(Sd2Card* dev); + * \param[in] dev The SD card where the volume is located. + * \return true for success or false for failure. + */ + bool init(Sd2Card& dev) {return init(&dev);} // NOLINT + /** \deprecated Use: bool SdVolume::init(Sd2Card* dev, uint8_t vol); + * \param[in] dev The SD card where the volume is located. + * \param[in] part The partition to be used. + * \return true for success or false for failure. + */ + bool init(Sd2Card& dev, uint8_t part) { // NOLINT + return init(&dev, part); + } +#endif // ALLOW_DEPRECATED_FUNCTIONS +}; +#endif // SdVolume +#endif \ No newline at end of file diff --git a/Marlin/Marlin/cardreader.cpp b/Marlin/Marlin/cardreader.cpp new file mode 100644 index 0000000000..47a3fd0509 --- /dev/null +++ b/Marlin/Marlin/cardreader.cpp @@ -0,0 +1,536 @@ +#include "Marlin.h" +#include "cardreader.h" +#include "ultralcd.h" +#include "stepper.h" +#include "temperature.h" +#include "language.h" + +#ifdef SDSUPPORT + + + +CardReader::CardReader() +{ + filesize = 0; + sdpos = 0; + sdprinting = false; + cardOK = false; + saving = false; + autostart_atmillis=0; + + autostart_stilltocheck=true; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware. + lastnr=0; + //power to SD reader + #if SDPOWER > -1 + SET_OUTPUT(SDPOWER); + WRITE(SDPOWER,HIGH); + #endif //SDPOWER + + autostart_atmillis=millis()+5000; +} + +char *createFilename(char *buffer,const dir_t &p) //buffer>12characters +{ + char *pos=buffer; + for (uint8_t i = 0; i < 11; i++) + { + if (p.name[i] == ' ')continue; + if (i == 8) + { + *pos++='.'; + } + *pos++=p.name[i]; + } + *pos++=0; + return buffer; +} + + +void CardReader::lsDive(const char *prepend,SdFile parent) +{ + dir_t p; + uint8_t cnt=0; + + while (parent.readDir(p, longFilename) > 0) + { + if( DIR_IS_SUBDIR(&p) && lsAction!=LS_Count && lsAction!=LS_GetFilename) // hence LS_SerialPrint + { + + char path[13*2]; + char lfilename[13]; + createFilename(lfilename,p); + + path[0]=0; + if(strlen(prepend)==0) //avoid leading / if already in prepend + { + strcat(path,"/"); + } + strcat(path,prepend); + strcat(path,lfilename); + strcat(path,"/"); + + //Serial.print(path); + + SdFile dir; + if(!dir.open(parent,lfilename, O_READ)) + { + if(lsAction==LS_SerialPrint) + { + SERIAL_ECHO_START; + SERIAL_ECHOLN(MSG_SD_CANT_OPEN_SUBDIR); + SERIAL_ECHOLN(lfilename); + } + } + lsDive(path,dir); + //close done automatically by destructor of SdFile + + + } + else + { + if (p.name[0] == DIR_NAME_FREE) break; + if (p.name[0] == DIR_NAME_DELETED || p.name[0] == '.'|| p.name[0] == '_') continue; + if ( p.name[0] == '.') + { + if ( p.name[1] != '.') + continue; + } + + if (!DIR_IS_FILE_OR_SUBDIR(&p)) continue; + filenameIsDir=DIR_IS_SUBDIR(&p); + + + if(!filenameIsDir) + { + if(p.name[8]!='G') continue; + if(p.name[9]=='~') continue; + } + //if(cnt++!=nr) continue; + createFilename(filename,p); + if(lsAction==LS_SerialPrint) + { + SERIAL_PROTOCOL(prepend); + SERIAL_PROTOCOLLN(filename); + } + else if(lsAction==LS_Count) + { + nrFiles++; + } + else if(lsAction==LS_GetFilename) + { + if(cnt==nrFiles) + return; + cnt++; + + } + } + } +} + +void CardReader::ls() +{ + lsAction=LS_SerialPrint; + if(lsAction==LS_Count) + nrFiles=0; + + root.rewind(); + lsDive("",root); +} + + +void CardReader::initsd() +{ + cardOK = false; + if(root.isOpen()) + root.close(); + if (!card.init(SPI_FULL_SPEED,SDSS)) + { + //if (!card.init(SPI_HALF_SPEED,SDSS)) + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM(MSG_SD_INIT_FAIL); + } + else if (!volume.init(&card)) + { + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM(MSG_SD_VOL_INIT_FAIL); + } + else if (!root.openRoot(&volume)) + { + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM(MSG_SD_OPENROOT_FAIL); + } + else + { + cardOK = true; + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM(MSG_SD_CARD_OK); + } + workDir=root; + curDir=&root; + /* + if(!workDir.openRoot(&volume)) + { + SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL); + } + */ + +} + +void CardReader::setroot() +{ + /*if(!workDir.openRoot(&volume)) + { + SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL); + }*/ + workDir=root; + + curDir=&workDir; +} +void CardReader::release() +{ + sdprinting = false; + cardOK = false; +} + +void CardReader::startFileprint() +{ + if(cardOK) + { + sdprinting = true; + + } +} + +void CardReader::pauseSDPrint() +{ + if(sdprinting) + { + sdprinting = false; + } +} + + + +void CardReader::openFile(char* name,bool read) +{ + if(!cardOK) + return; + file.close(); + sdprinting = false; + + + SdFile myDir; + curDir=&root; + char *fname=name; + + char *dirname_start,*dirname_end; + if(name[0]=='/') + { + dirname_start=strchr(name,'/')+1; + while(dirname_start>0) + { + dirname_end=strchr(dirname_start,'/'); + //SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start-name)); + //SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end-name)); + if(dirname_end>0 && dirname_end>dirname_start) + { + char subdirname[13]; + strncpy(subdirname, dirname_start, dirname_end-dirname_start); + subdirname[dirname_end-dirname_start]=0; + SERIAL_ECHOLN(subdirname); + if(!myDir.open(curDir,subdirname,O_READ)) + { + SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL); + SERIAL_PROTOCOL(subdirname); + SERIAL_PROTOCOLLNPGM("."); + return; + } + else + ;//SERIAL_ECHOLN("dive ok"); + + curDir=&myDir; + dirname_start=dirname_end+1; + } + else // the reminder after all /fsa/fdsa/ is the filename + { + fname=dirname_start; + //SERIAL_ECHOLN("remaider"); + //SERIAL_ECHOLN(fname); + break; + } + + } + } + else //relative path + { + curDir=&workDir; + } + if(read) + { + if (file.open(curDir, fname, O_READ)) + { + filesize = file.fileSize(); + SERIAL_PROTOCOLPGM(MSG_SD_FILE_OPENED); + SERIAL_PROTOCOL(fname); + SERIAL_PROTOCOLPGM(MSG_SD_SIZE); + SERIAL_PROTOCOLLN(filesize); + sdpos = 0; + + SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED); + LCD_MESSAGE(fname); + } + else + { + SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL); + SERIAL_PROTOCOL(fname); + SERIAL_PROTOCOLLNPGM("."); + } + } + else + { //write + if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) + { + SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL); + SERIAL_PROTOCOL(fname); + SERIAL_PROTOCOLLNPGM("."); + } + else + { + saving = true; + SERIAL_PROTOCOLPGM(MSG_SD_WRITE_TO_FILE); + SERIAL_PROTOCOLLN(name); + LCD_MESSAGE(fname); + } + } + +} + +void CardReader::removeFile(char* name) +{ + if(!cardOK) + return; + file.close(); + sdprinting = false; + + + SdFile myDir; + curDir=&root; + char *fname=name; + + char *dirname_start,*dirname_end; + if(name[0]=='/') + { + dirname_start=strchr(name,'/')+1; + while(dirname_start>0) + { + dirname_end=strchr(dirname_start,'/'); + //SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start-name)); + //SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end-name)); + if(dirname_end>0 && dirname_end>dirname_start) + { + char subdirname[13]; + strncpy(subdirname, dirname_start, dirname_end-dirname_start); + subdirname[dirname_end-dirname_start]=0; + SERIAL_ECHOLN(subdirname); + if(!myDir.open(curDir,subdirname,O_READ)) + { + SERIAL_PROTOCOLPGM("open failed, File: "); + SERIAL_PROTOCOL(subdirname); + SERIAL_PROTOCOLLNPGM("."); + return; + } + else + ;//SERIAL_ECHOLN("dive ok"); + + curDir=&myDir; + dirname_start=dirname_end+1; + } + else // the reminder after all /fsa/fdsa/ is the filename + { + fname=dirname_start; + //SERIAL_ECHOLN("remaider"); + //SERIAL_ECHOLN(fname); + break; + } + + } + } + else //relative path + { + curDir=&workDir; + } + if (file.remove(curDir, fname)) + { + SERIAL_PROTOCOLPGM("File deleted:"); + SERIAL_PROTOCOL(fname); + sdpos = 0; + } + else + { + SERIAL_PROTOCOLPGM("Deletion failed, File: "); + SERIAL_PROTOCOL(fname); + SERIAL_PROTOCOLLNPGM("."); + } + +} + +void CardReader::getStatus() +{ + if(cardOK){ + SERIAL_PROTOCOLPGM(MSG_SD_PRINTING_BYTE); + SERIAL_PROTOCOL(sdpos); + SERIAL_PROTOCOLPGM("/"); + SERIAL_PROTOCOLLN(filesize); + } + else{ + SERIAL_PROTOCOLLNPGM(MSG_SD_NOT_PRINTING); + } +} +void CardReader::write_command(char *buf) +{ + char* begin = buf; + char* npos = 0; + char* end = buf + strlen(buf) - 1; + + file.writeError = false; + if((npos = strchr(buf, 'N')) != NULL) + { + begin = strchr(npos, ' ') + 1; + end = strchr(npos, '*') - 1; + } + end[1] = '\r'; + end[2] = '\n'; + end[3] = '\0'; + file.write(begin); + if (file.writeError) + { + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM(MSG_SD_ERR_WRITE_TO_FILE); + } +} + + +void CardReader::checkautostart(bool force) +{ + if(!force) + { + if(!autostart_stilltocheck) + return; + if(autostart_atmillis 0) + { + for(int8_t i=0;i<(int8_t)strlen((char*)p.name);i++) + p.name[i]=tolower(p.name[i]); + //Serial.print((char*)p.name); + //Serial.print(" "); + //Serial.println(autoname); + if(p.name[9]!='~') //skip safety copies + if(strncmp((char*)p.name,autoname,5)==0) + { + char cmd[30]; + + sprintf(cmd,"M23 %s",autoname); + enquecommand(cmd); + enquecommand("M24"); + found=true; + } + } + if(!found) + lastnr=-1; + else + lastnr++; +} + +void CardReader::closefile() +{ + file.sync(); + file.close(); + saving = false; +} + +void CardReader::getfilename(const uint8_t nr) +{ + curDir=&workDir; + lsAction=LS_GetFilename; + nrFiles=nr; + curDir->rewind(); + lsDive("",*curDir); + +} + +uint16_t CardReader::getnrfilenames() +{ + curDir=&workDir; + lsAction=LS_Count; + nrFiles=0; + curDir->rewind(); + lsDive("",*curDir); + //SERIAL_ECHOLN(nrFiles); + return nrFiles; +} + +void CardReader::chdir(const char * relpath) +{ + SdFile newfile; + SdFile *parent=&root; + + if(workDir.isOpen()) + parent=&workDir; + + if(!newfile.open(*parent,relpath, O_READ)) + { + SERIAL_ECHO_START; + SERIAL_ECHOPGM(MSG_SD_CANT_ENTER_SUBDIR); + SERIAL_ECHOLN(relpath); + } + else + { + workDirParentParent=workDirParent; + workDirParent=*parent; + + workDir=newfile; + } +} + +void CardReader::updir() +{ + if(!workDir.isRoot()) + { + workDir=workDirParent; + workDirParent=workDirParentParent; + } +} + + +void CardReader::printingHasFinished() +{ + st_synchronize(); + quickStop(); + sdprinting = false; + if(SD_FINISHED_STEPPERRELEASE) + { + //finishAndDisableSteppers(); + enquecommand(SD_FINISHED_RELEASECOMMAND); + } + autotempShutdown(); +} +#endif //SDSUPPORT diff --git a/Marlin/Marlin/cardreader.h b/Marlin/Marlin/cardreader.h new file mode 100644 index 0000000000..e5c8443f5e --- /dev/null +++ b/Marlin/Marlin/cardreader.h @@ -0,0 +1,76 @@ +#ifndef CARDREADER_H +#define CARDREADER_H + +#ifdef SDSUPPORT + +#include "SdFile.h" +enum LsAction {LS_SerialPrint,LS_Count,LS_GetFilename}; +class CardReader +{ +public: + CardReader(); + + void initsd(); + void write_command(char *buf); + //files auto[0-9].g on the sd card are performed in a row + //this is to delay autostart and hence the initialisaiton of the sd card to some seconds after the normal init, so the device is available quick after a reset + + void checkautostart(bool x); + void openFile(char* name,bool read); + void removeFile(char* name); + void closefile(); + void release(); + void startFileprint(); + void pauseSDPrint(); + void getStatus(); + void printingHasFinished(); + + void getfilename(const uint8_t nr); + uint16_t getnrfilenames(); + + + void ls(); + void chdir(const char * relpath); + void updir(); + void setroot(); + + + FORCE_INLINE bool eof() { return sdpos>=filesize ;}; + FORCE_INLINE int16_t get() { sdpos = file.curPosition();return (int16_t)file.read();}; + FORCE_INLINE void setIndex(long index) {sdpos = index;file.seekSet(index);}; + FORCE_INLINE uint8_t percentDone(){if(!sdprinting) return 0; if(filesize) return sdpos*100/filesize; else return 0;}; + FORCE_INLINE char* getWorkDirName(){workDir.getFilename(filename);return filename;}; + +public: + bool saving; + bool sdprinting ; + bool cardOK ; + char filename[13]; + char longFilename[LONG_FILENAME_LENGTH]; + bool filenameIsDir; + int lastnr; //last number of the autostart; +private: + SdFile root,*curDir,workDir,workDirParent,workDirParentParent; + Sd2Card card; + SdVolume volume; + SdFile file; + uint32_t filesize; + //int16_t n; + unsigned long autostart_atmillis; + uint32_t sdpos ; + + bool autostart_stilltocheck; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware. + + LsAction lsAction; //stored for recursion. + int16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory. + char* diveDirName; + void lsDive(const char *prepend,SdFile parent); +}; +#define IS_SD_PRINTING (card.sdprinting) + +#else + +#define IS_SD_PRINTING (false) + +#endif //SDSUPPORT +#endif diff --git a/Marlin/Marlin/createTemperatureLookup.py b/Marlin/Marlin/createTemperatureLookup.py new file mode 100644 index 0000000000..e60a490c8f --- /dev/null +++ b/Marlin/Marlin/createTemperatureLookup.py @@ -0,0 +1,127 @@ +#!/usr/bin/python +# +# Creates a C code lookup table for doing ADC to temperature conversion +# on a microcontroller +# based on: http://hydraraptor.blogspot.com/2007/10/measuring-temperature-easy-way.html +"""Thermistor Value Lookup Table Generator + +Generates lookup to temperature values for use in a microcontroller in C format based on: +http://hydraraptor.blogspot.com/2007/10/measuring-temperature-easy-way.html + +The main use is for Arduino programs that read data from the circuit board described here: +http://make.rrrf.org/ts-1.0 + +Usage: python createTemperatureLookup.py [options] + +Options: + -h, --help show this help + --r0=... thermistor rating where # is the ohm rating of the thermistor at t0 (eg: 10K = 10000) + --t0=... thermistor temp rating where # is the temperature in Celsuis to get r0 (from your datasheet) + --beta=... thermistor beta rating. see http://reprap.org/bin/view/Main/MeasuringThermistorBeta + --r1=... R1 rating where # is the ohm rating of R1 (eg: 10K = 10000) + --r2=... R2 rating where # is the ohm rating of R2 (eg: 10K = 10000) + --num-temps=... the number of temperature points to calculate (default: 20) + --max-adc=... the max ADC reading to use. if you use R1, it limits the top value for the thermistor circuit, and thus the possible range of ADC values +""" + +from math import * +import sys +import getopt + +class Thermistor: + "Class to do the thermistor maths" + def __init__(self, r0, t0, beta, r1, r2): + self.r0 = r0 # stated resistance, e.g. 10K + self.t0 = t0 + 273.15 # temperature at stated resistance, e.g. 25C + self.beta = beta # stated beta, e.g. 3500 + self.vadc = 5.0 # ADC reference + self.vcc = 5.0 # supply voltage to potential divider + self.k = r0 * exp(-beta / self.t0) # constant part of calculation + + if r1 > 0: + self.vs = r1 * self.vcc / (r1 + r2) # effective bias voltage + self.rs = r1 * r2 / (r1 + r2) # effective bias impedance + else: + self.vs = self.vcc # effective bias voltage + self.rs = r2 # effective bias impedance + + def temp(self,adc): + "Convert ADC reading into a temperature in Celcius" + v = adc * self.vadc / 1024 # convert the 10 bit ADC value to a voltage + r = self.rs * v / (self.vs - v) # resistance of thermistor + return (self.beta / log(r / self.k)) - 273.15 # temperature + + def setting(self, t): + "Convert a temperature into a ADC value" + r = self.r0 * exp(self.beta * (1 / (t + 273.15) - 1 / self.t0)) # resistance of the thermistor + v = self.vs * r / (self.rs + r) # the voltage at the potential divider + return round(v / self.vadc * 1024) # the ADC reading + +def main(argv): + + r0 = 10000; + t0 = 25; + beta = 3947; + r1 = 680; + r2 = 1600; + num_temps = int(20); + + try: + opts, args = getopt.getopt(argv, "h", ["help", "r0=", "t0=", "beta=", "r1=", "r2="]) + except getopt.GetoptError: + usage() + sys.exit(2) + + for opt, arg in opts: + if opt in ("-h", "--help"): + usage() + sys.exit() + elif opt == "--r0": + r0 = int(arg) + elif opt == "--t0": + t0 = int(arg) + elif opt == "--beta": + beta = int(arg) + elif opt == "--r1": + r1 = int(arg) + elif opt == "--r2": + r2 = int(arg) + + if r1: + max_adc = int(1023 * r1 / (r1 + r2)); + else: + max_adc = 1023 + increment = int(max_adc/(num_temps-1)); + + t = Thermistor(r0, t0, beta, r1, r2) + + adcs = range(1, max_adc, increment); +# adcs = [1, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100, 110, 130, 150, 190, 220, 250, 300] + first = 1 + + print "// Thermistor lookup table for RepRap Temperature Sensor Boards (http://make.rrrf.org/ts)" + print "// Made with createTemperatureLookup.py (http://svn.reprap.org/trunk/reprap/firmware/Arduino/utilities/createTemperatureLookup.py)" + print "// ./createTemperatureLookup.py --r0=%s --t0=%s --r1=%s --r2=%s --beta=%s --max-adc=%s" % (r0, t0, r1, r2, beta, max_adc) + print "// r0: %s" % (r0) + print "// t0: %s" % (t0) + print "// r1: %s" % (r1) + print "// r2: %s" % (r2) + print "// beta: %s" % (beta) + print "// max adc: %s" % (max_adc) + print "#define NUMTEMPS %s" % (len(adcs)) + print "short temptable[NUMTEMPS][2] = {" + + counter = 0 + for adc in adcs: + counter = counter +1 + if counter == len(adcs): + print " {%s, %s}" % (adc, int(t.temp(adc))) + else: + print " {%s, %s}," % (adc, int(t.temp(adc))) + print "};" + +def usage(): + print __doc__ + +if __name__ == "__main__": + main(sys.argv[1:]) diff --git a/Marlin/Marlin/create_speed_lookuptable.py b/Marlin/Marlin/create_speed_lookuptable.py new file mode 100755 index 0000000000..13ed92d520 --- /dev/null +++ b/Marlin/Marlin/create_speed_lookuptable.py @@ -0,0 +1,50 @@ +#!/usr/bin/env python + +""" Generate the stepper delay lookup table for Marlin firmware. """ + +import argparse + +__author__ = "Ben Gamari " +__copyright__ = "Copyright 2012, Ben Gamari" +__license__ = "GPL" + +parser = argparse.ArgumentParser(description=__doc__) +parser.add_argument('-f', '--cpu-freq', type=int, default=16, help='CPU clockrate in MHz (default=16)') +parser.add_argument('-d', '--divider', type=int, default=8, help='Timer/counter pre-scale divider (default=8)') +args = parser.parse_args() + +cpu_freq = args.cpu_freq * 1000000 +timer_freq = cpu_freq / args.divider + +print "#ifndef SPEED_LOOKUPTABLE_H" +print "#define SPEED_LOOKUPTABLE_H" +print +print '#include "Marlin.h"' +print + +print "const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {" +a = [ timer_freq / ((i*256)+(args.cpu_freq*2)) for i in range(256) ] +b = [ a[i] - a[i+1] for i in range(255) ] +b.append(b[-1]) +for i in range(32): + print " ", + for j in range(8): + print "{%d, %d}," % (a[8*i+j], b[8*i+j]), + print +print "};" +print + +print "const uint16_t speed_lookuptable_slow[256][2] PROGMEM = {" +a = [ timer_freq / ((i*8)+(args.cpu_freq*2)) for i in range(256) ] +b = [ a[i] - a[i+1] for i in range(255) ] +b.append(b[-1]) +for i in range(32): + print " ", + for j in range(8): + print "{%d, %d}," % (a[8*i+j], b[8*i+j]), + print +print "};" +print + +print "#endif" + diff --git a/Marlin/Marlin/fastio.h b/Marlin/Marlin/fastio.h new file mode 100644 index 0000000000..cb4399a950 --- /dev/null +++ b/Marlin/Marlin/fastio.h @@ -0,0 +1,2582 @@ +/* + This code contibuted by Triffid_Hunter and modified by Kliment + why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html +*/ + +#ifndef _ARDUINO_H +#define _ARDUINO_H + +#include + +/* + utility functions +*/ + +#ifndef MASK +/// MASKING- returns \f$2^PIN\f$ +#define MASK(PIN) (1 << PIN) +#endif + +/* + magic I/O routines + now you can simply SET_OUTPUT(STEP); WRITE(STEP, 1); WRITE(STEP, 0); +*/ + +/// Read a pin +#define _READ(IO) ((bool)(DIO ## IO ## _RPORT & MASK(DIO ## IO ## _PIN))) +/// write to a pin +// On some boards pins > 0x100 are used. These are not converted to atomic actions. An critical section is needed. + +#define _WRITE_NC(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }; } while (0) + +#define _WRITE_C(IO, v) do { if (v) { \ + CRITICAL_SECTION_START; \ + {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); }\ + CRITICAL_SECTION_END; \ + }\ + else {\ + CRITICAL_SECTION_START; \ + {DIO ## IO ## _WPORT &= ~MASK(DIO ## IO ## _PIN); }\ + CRITICAL_SECTION_END; \ + }\ + }\ + while (0) + +#define _WRITE(IO, v) do { if (&(DIO ## IO ## _RPORT) >= (uint8_t *)0x100) {_WRITE_C(IO, v); } else {_WRITE_NC(IO, v); }; } while (0) + +/// toggle a pin +#define _TOGGLE(IO) do {DIO ## IO ## _RPORT = MASK(DIO ## IO ## _PIN); } while (0) + +/// set pin as input +#define _SET_INPUT(IO) do {DIO ## IO ## _DDR &= ~MASK(DIO ## IO ## _PIN); } while (0) +/// set pin as output +#define _SET_OUTPUT(IO) do {DIO ## IO ## _DDR |= MASK(DIO ## IO ## _PIN); } while (0) + +/// check if pin is an input +#define _GET_INPUT(IO) ((DIO ## IO ## _DDR & MASK(DIO ## IO ## _PIN)) == 0) +/// check if pin is an output +#define _GET_OUTPUT(IO) ((DIO ## IO ## _DDR & MASK(DIO ## IO ## _PIN)) != 0) + +/// check if pin is an timer +#define _GET_TIMER(IO) ((DIO ## IO ## _PWM) + +// why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + +/// Read a pin wrapper +#define READ(IO) _READ(IO) +/// Write to a pin wrapper +#define WRITE(IO, v) _WRITE(IO, v) + +/// toggle a pin wrapper +#define TOGGLE(IO) _TOGGLE(IO) + +/// set pin as input wrapper +#define SET_INPUT(IO) _SET_INPUT(IO) +/// set pin as output wrapper +#define SET_OUTPUT(IO) _SET_OUTPUT(IO) + +/// check if pin is an input wrapper +#define GET_INPUT(IO) _GET_INPUT(IO) +/// check if pin is an output wrapper +#define GET_OUTPUT(IO) _GET_OUTPUT(IO) + +/// check if pin is an timer wrapper +#define GET_TIMER(IO) _GET_TIMER(IO) + +/* + ports and functions + + added as necessary or if I feel like it- not a comprehensive list! +*/ + +#if defined (__AVR_ATmega168__) || defined (__AVR_ATmega328__) || defined (__AVR_ATmega328P__) +// UART +#define RXD DIO0 +#define TXD DIO1 + +// SPI +#define SCK DIO13 +#define MISO DIO12 +#define MOSI DIO11 +#define SS DIO10 + +// TWI (I2C) +#define SCL AIO5 +#define SDA AIO4 + +// timers and PWM +#define OC0A DIO6 +#define OC0B DIO5 +#define OC1A DIO9 +#define OC1B DIO10 +#define OC2A DIO11 +#define OC2B DIO3 + +#define DEBUG_LED AIO5 + +/* +pins +*/ + +#define DIO0_PIN PIND0 +#define DIO0_RPORT PIND +#define DIO0_WPORT PORTD +#define DIO0_DDR DDRD +#define DIO0_PWM NULL + +#define DIO1_PIN PIND1 +#define DIO1_RPORT PIND +#define DIO1_WPORT PORTD +#define DIO1_DDR DDRD +#define DIO1_PWM NULL + +#define DIO2_PIN PIND2 +#define DIO2_RPORT PIND +#define DIO2_WPORT PORTD +#define DIO2_DDR DDRD +#define DIO2_PWM NULL + +#define DIO3_PIN PIND3 +#define DIO3_RPORT PIND +#define DIO3_WPORT PORTD +#define DIO3_DDR DDRD +#define DIO3_PWM &OCR2B + +#define DIO4_PIN PIND4 +#define DIO4_RPORT PIND +#define DIO4_WPORT PORTD +#define DIO4_DDR DDRD +#define DIO4_PWM NULL + +#define DIO5_PIN PIND5 +#define DIO5_RPORT PIND +#define DIO5_WPORT PORTD +#define DIO5_DDR DDRD +#define DIO5_PWM &OCR0B + +#define DIO6_PIN PIND6 +#define DIO6_RPORT PIND +#define DIO6_WPORT PORTD +#define DIO6_DDR DDRD +#define DIO6_PWM &OCR0A + +#define DIO7_PIN PIND7 +#define DIO7_RPORT PIND +#define DIO7_WPORT PORTD +#define DIO7_DDR DDRD +#define DIO7_PWM NULL + +#define DIO8_PIN PINB0 +#define DIO8_RPORT PINB +#define DIO8_WPORT PORTB +#define DIO8_DDR DDRB +#define DIO8_PWM NULL + +#define DIO9_PIN PINB1 +#define DIO9_RPORT PINB +#define DIO9_WPORT PORTB +#define DIO9_DDR DDRB +#define DIO9_PWM NULL + +#define DIO10_PIN PINB2 +#define DIO10_RPORT PINB +#define DIO10_WPORT PORTB +#define DIO10_DDR DDRB +#define DIO10_PWM NULL + +#define DIO11_PIN PINB3 +#define DIO11_RPORT PINB +#define DIO11_WPORT PORTB +#define DIO11_DDR DDRB +#define DIO11_PWM &OCR2A + +#define DIO12_PIN PINB4 +#define DIO12_RPORT PINB +#define DIO12_WPORT PORTB +#define DIO12_DDR DDRB +#define DIO12_PWM NULL + +#define DIO13_PIN PINB5 +#define DIO13_RPORT PINB +#define DIO13_WPORT PORTB +#define DIO13_DDR DDRB +#define DIO13_PWM NULL + + +#define DIO14_PIN PINC0 +#define DIO14_RPORT PINC +#define DIO14_WPORT PORTC +#define DIO14_DDR DDRC +#define DIO14_PWM NULL + +#define DIO15_PIN PINC1 +#define DIO15_RPORT PINC +#define DIO15_WPORT PORTC +#define DIO15_DDR DDRC +#define DIO15_PWM NULL + +#define DIO16_PIN PINC2 +#define DIO16_RPORT PINC +#define DIO16_WPORT PORTC +#define DIO16_DDR DDRC +#define DIO16_PWM NULL + +#define DIO17_PIN PINC3 +#define DIO17_RPORT PINC +#define DIO17_WPORT PORTC +#define DIO17_DDR DDRC +#define DIO17_PWM NULL + +#define DIO18_PIN PINC4 +#define DIO18_RPORT PINC +#define DIO18_WPORT PORTC +#define DIO18_DDR DDRC +#define DIO18_PWM NULL + +#define DIO19_PIN PINC5 +#define DIO19_RPORT PINC +#define DIO19_WPORT PORTC +#define DIO19_DDR DDRC +#define DIO19_PWM NULL + +#define DIO20_PIN PINC6 +#define DIO20_RPORT PINC +#define DIO20_WPORT PORTC +#define DIO20_DDR DDRC +#define DIO20_PWM NULL + +#define DIO21_PIN PINC7 +#define DIO21_RPORT PINC +#define DIO21_WPORT PORTC +#define DIO21_DDR DDRC +#define DIO21_PWM NULL + + + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_DDR DDRB +#define PB0_PWM NULL + +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_DDR DDRB +#define PB1_PWM NULL + +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_DDR DDRB +#define PB2_PWM NULL + +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_DDR DDRB +#define PB3_PWM &OCR2A + +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_DDR DDRB +#define PB4_PWM NULL + +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_DDR DDRB +#define PB5_PWM NULL + +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_DDR DDRB +#define PB6_PWM NULL + +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_DDR DDRB +#define PB7_PWM NULL + + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_DDR DDRC +#define PC0_PWM NULL + +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_DDR DDRC +#define PC1_PWM NULL + +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_DDR DDRC +#define PC2_PWM NULL + +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_DDR DDRC +#define PC3_PWM NULL + +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_DDR DDRC +#define PC4_PWM NULL + +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_DDR DDRC +#define PC5_PWM NULL + +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_DDR DDRC +#define PC6_PWM NULL + +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_DDR DDRC +#define PC7_PWM NULL + + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_DDR DDRD +#define PD0_PWM NULL + +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_DDR DDRD +#define PD1_PWM NULL + +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_DDR DDRD +#define PD2_PWM NULL + +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_DDR DDRD +#define PD3_PWM &OCR2B + +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_DDR DDRD +#define PD4_PWM NULL + +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_DDR DDRD +#define PD5_PWM &OCR0B + +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_DDR DDRD +#define PD6_PWM &OCR0A + +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_DDR DDRD +#define PD7_PWM NULL +#endif /* _AVR_ATmega{168,328,328P}__ */ + +#if defined (__AVR_ATmega644__) || defined (__AVR_ATmega644P__) || defined (__AVR_ATmega644PA__) || defined (__AVR_ATmega1284P__) +// UART +#define RXD DIO8 +#define TXD DIO9 +#define RXD0 DIO8 +#define TXD0 DIO9 + +#define RXD1 DIO10 +#define TXD1 DIO11 + +// SPI +#define SCK DIO7 +#define MISO DIO6 +#define MOSI DIO5 +#define SS DIO4 + +// TWI (I2C) +#define SCL DIO16 +#define SDA DIO17 + +// timers and PWM +#define OC0A DIO3 +#define OC0B DIO4 +#define OC1A DIO13 +#define OC1B DIO12 +#define OC2A DIO15 +#define OC2B DIO14 + +#define DEBUG_LED DIO0 +/* +pins +*/ + +#define DIO0_PIN PINB0 +#define DIO0_RPORT PINB +#define DIO0_WPORT PORTB +#define DIO0_DDR DDRB +#define DIO0_PWM NULL + +#define DIO1_PIN PINB1 +#define DIO1_RPORT PINB +#define DIO1_WPORT PORTB +#define DIO1_DDR DDRB +#define DIO1_PWM NULL + +#define DIO2_PIN PINB2 +#define DIO2_RPORT PINB +#define DIO2_WPORT PORTB +#define DIO2_DDR DDRB +#define DIO2_PWM NULL + +#define DIO3_PIN PINB3 +#define DIO3_RPORT PINB +#define DIO3_WPORT PORTB +#define DIO3_DDR DDRB +#define DIO3_PWM OCR0A + +#define DIO4_PIN PINB4 +#define DIO4_RPORT PINB +#define DIO4_WPORT PORTB +#define DIO4_DDR DDRB +#define DIO4_PWM OCR0B + +#define DIO5_PIN PINB5 +#define DIO5_RPORT PINB +#define DIO5_WPORT PORTB +#define DIO5_DDR DDRB +#define DIO5_PWM NULL + +#define DIO6_PIN PINB6 +#define DIO6_RPORT PINB +#define DIO6_WPORT PORTB +#define DIO6_DDR DDRB +#define DIO6_PWM NULL + +#define DIO7_PIN PINB7 +#define DIO7_RPORT PINB +#define DIO7_WPORT PORTB +#define DIO7_DDR DDRB +#define DIO7_PWM NULL + +#define DIO8_PIN PIND0 +#define DIO8_RPORT PIND +#define DIO8_WPORT PORTD +#define DIO8_DDR DDRD +#define DIO8_PWM NULL + +#define DIO9_PIN PIND1 +#define DIO9_RPORT PIND +#define DIO9_WPORT PORTD +#define DIO9_DDR DDRD +#define DIO9_PWM NULL + +#define DIO10_PIN PIND2 +#define DIO10_RPORT PIND +#define DIO10_WPORT PORTD +#define DIO10_DDR DDRD +#define DIO10_PWM NULL + +#define DIO11_PIN PIND3 +#define DIO11_RPORT PIND +#define DIO11_WPORT PORTD +#define DIO11_DDR DDRD +#define DIO11_PWM NULL + +#define DIO12_PIN PIND4 +#define DIO12_RPORT PIND +#define DIO12_WPORT PORTD +#define DIO12_DDR DDRD +#define DIO12_PWM OCR1B + +#define DIO13_PIN PIND5 +#define DIO13_RPORT PIND +#define DIO13_WPORT PORTD +#define DIO13_DDR DDRD +#define DIO13_PWM OCR1A + +#define DIO14_PIN PIND6 +#define DIO14_RPORT PIND +#define DIO14_WPORT PORTD +#define DIO14_DDR DDRD +#define DIO14_PWM OCR2B + +#define DIO15_PIN PIND7 +#define DIO15_RPORT PIND +#define DIO15_WPORT PORTD +#define DIO15_DDR DDRD +#define DIO15_PWM OCR2A + +#define DIO16_PIN PINC0 +#define DIO16_RPORT PINC +#define DIO16_WPORT PORTC +#define DIO16_DDR DDRC +#define DIO16_PWM NULL + +#define DIO17_PIN PINC1 +#define DIO17_RPORT PINC +#define DIO17_WPORT PORTC +#define DIO17_DDR DDRC +#define DIO17_PWM NULL + +#define DIO18_PIN PINC2 +#define DIO18_RPORT PINC +#define DIO18_WPORT PORTC +#define DIO18_DDR DDRC +#define DIO18_PWM NULL + +#define DIO19_PIN PINC3 +#define DIO19_RPORT PINC +#define DIO19_WPORT PORTC +#define DIO19_DDR DDRC +#define DIO19_PWM NULL + +#define DIO20_PIN PINC4 +#define DIO20_RPORT PINC +#define DIO20_WPORT PORTC +#define DIO20_DDR DDRC +#define DIO20_PWM NULL + +#define DIO21_PIN PINC5 +#define DIO21_RPORT PINC +#define DIO21_WPORT PORTC +#define DIO21_DDR DDRC +#define DIO21_PWM NULL + +#define DIO22_PIN PINC6 +#define DIO22_RPORT PINC +#define DIO22_WPORT PORTC +#define DIO22_DDR DDRC +#define DIO22_PWM NULL + +#define DIO23_PIN PINC7 +#define DIO23_RPORT PINC +#define DIO23_WPORT PORTC +#define DIO23_DDR DDRC +#define DIO23_PWM NULL + +#define DIO24_PIN PINA7 +#define DIO24_RPORT PINA +#define DIO24_WPORT PORTA +#define DIO24_DDR DDRA +#define DIO24_PWM NULL + +#define DIO25_PIN PINA6 +#define DIO25_RPORT PINA +#define DIO25_WPORT PORTA +#define DIO25_DDR DDRA +#define DIO25_PWM NULL + +#define DIO26_PIN PINA5 +#define DIO26_RPORT PINA +#define DIO26_WPORT PORTA +#define DIO26_DDR DDRA +#define DIO26_PWM NULL + +#define DIO27_PIN PINA4 +#define DIO27_RPORT PINA +#define DIO27_WPORT PORTA +#define DIO27_DDR DDRA +#define DIO27_PWM NULL + +#define DIO28_PIN PINA3 +#define DIO28_RPORT PINA +#define DIO28_WPORT PORTA +#define DIO28_DDR DDRA +#define DIO28_PWM NULL + +#define DIO29_PIN PINA2 +#define DIO29_RPORT PINA +#define DIO29_WPORT PORTA +#define DIO29_DDR DDRA +#define DIO29_PWM NULL + +#define DIO30_PIN PINA1 +#define DIO30_RPORT PINA +#define DIO30_WPORT PORTA +#define DIO30_DDR DDRA +#define DIO30_PWM NULL + +#define DIO31_PIN PINA0 +#define DIO31_RPORT PINA +#define DIO31_WPORT PORTA +#define DIO31_DDR DDRA +#define DIO31_PWM NULL + +#define AIO0_PIN PINA0 +#define AIO0_RPORT PINA +#define AIO0_WPORT PORTA +#define AIO0_DDR DDRA +#define AIO0_PWM NULL + +#define AIO1_PIN PINA1 +#define AIO1_RPORT PINA +#define AIO1_WPORT PORTA +#define AIO1_DDR DDRA +#define AIO1_PWM NULL + +#define AIO2_PIN PINA2 +#define AIO2_RPORT PINA +#define AIO2_WPORT PORTA +#define AIO2_DDR DDRA +#define AIO2_PWM NULL + +#define AIO3_PIN PINA3 +#define AIO3_RPORT PINA +#define AIO3_WPORT PORTA +#define AIO3_DDR DDRA +#define AIO3_PWM NULL + +#define AIO4_PIN PINA4 +#define AIO4_RPORT PINA +#define AIO4_WPORT PORTA +#define AIO4_DDR DDRA +#define AIO4_PWM NULL + +#define AIO5_PIN PINA5 +#define AIO5_RPORT PINA +#define AIO5_WPORT PORTA +#define AIO5_DDR DDRA +#define AIO5_PWM NULL + +#define AIO6_PIN PINA6 +#define AIO6_RPORT PINA +#define AIO6_WPORT PORTA +#define AIO6_DDR DDRA +#define AIO6_PWM NULL + +#define AIO7_PIN PINA7 +#define AIO7_RPORT PINA +#define AIO7_WPORT PORTA +#define AIO7_DDR DDRA +#define AIO7_PWM NULL + + + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_DDR DDRA +#define PA0_PWM NULL + +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_DDR DDRA +#define PA1_PWM NULL + +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_DDR DDRA +#define PA2_PWM NULL + +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_DDR DDRA +#define PA3_PWM NULL + +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_DDR DDRA +#define PA4_PWM NULL + +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_DDR DDRA +#define PA5_PWM NULL + +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_DDR DDRA +#define PA6_PWM NULL + +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_DDR DDRA +#define PA7_PWM NULL + + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_DDR DDRB +#define PB0_PWM NULL + +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_DDR DDRB +#define PB1_PWM NULL + +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_DDR DDRB +#define PB2_PWM NULL + +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_DDR DDRB +#define PB3_PWM OCR0A + +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_DDR DDRB +#define PB4_PWM OCR0B + +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_DDR DDRB +#define PB5_PWM NULL + +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_DDR DDRB +#define PB6_PWM NULL + +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_DDR DDRB +#define PB7_PWM NULL + + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_DDR DDRC +#define PC0_PWM NULL + +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_DDR DDRC +#define PC1_PWM NULL + +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_DDR DDRC +#define PC2_PWM NULL + +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_DDR DDRC +#define PC3_PWM NULL + +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_DDR DDRC +#define PC4_PWM NULL + +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_DDR DDRC +#define PC5_PWM NULL + +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_DDR DDRC +#define PC6_PWM NULL + +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_DDR DDRC +#define PC7_PWM NULL + + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_DDR DDRD +#define PD0_PWM NULL + +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_DDR DDRD +#define PD1_PWM NULL + +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_DDR DDRD +#define PD2_PWM NULL + +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_DDR DDRD +#define PD3_PWM NULL + +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_DDR DDRD +#define PD4_PWM NULL + +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_DDR DDRD +#define PD5_PWM NULL + +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_DDR DDRD +#define PD6_PWM OCR2B + +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_DDR DDRD +#define PD7_PWM OCR2A +#endif /* _AVR_ATmega{644,644P,644PA}__ */ + +#if defined (__AVR_ATmega1280__) || defined (__AVR_ATmega2560__) +// UART +#define RXD DIO0 +#define TXD DIO1 + +// SPI +#define SCK DIO52 +#define MISO DIO50 +#define MOSI DIO51 +#define SS DIO53 + +// TWI (I2C) +#define SCL DIO21 +#define SDA DIO20 + +// timers and PWM +#define OC0A DIO13 +#define OC0B DIO4 +#define OC1A DIO11 +#define OC1B DIO12 +#define OC2A DIO10 +#define OC2B DIO9 +#define OC3A DIO5 +#define OC3B DIO2 +#define OC3C DIO3 +#define OC4A DIO6 +#define OC4B DIO7 +#define OC4C DIO8 +#define OC5A DIO46 +#define OC5B DIO45 +#define OC5C DIO44 + +// change for your board +#define DEBUG_LED DIO21 + +/* +pins +*/ +#define DIO0_PIN PINE0 +#define DIO0_RPORT PINE +#define DIO0_WPORT PORTE +#define DIO0_DDR DDRE +#define DIO0_PWM NULL + +#define DIO1_PIN PINE1 +#define DIO1_RPORT PINE +#define DIO1_WPORT PORTE +#define DIO1_DDR DDRE +#define DIO1_PWM NULL + +#define DIO2_PIN PINE4 +#define DIO2_RPORT PINE +#define DIO2_WPORT PORTE +#define DIO2_DDR DDRE +#define DIO2_PWM &OCR3BL + +#define DIO3_PIN PINE5 +#define DIO3_RPORT PINE +#define DIO3_WPORT PORTE +#define DIO3_DDR DDRE +#define DIO3_PWM &OCR3CL + +#define DIO4_PIN PING5 +#define DIO4_RPORT PING +#define DIO4_WPORT PORTG +#define DIO4_DDR DDRG +#define DIO4_PWM &OCR0B + +#define DIO5_PIN PINE3 +#define DIO5_RPORT PINE +#define DIO5_WPORT PORTE +#define DIO5_DDR DDRE +#define DIO5_PWM &OCR3AL + +#define DIO6_PIN PINH3 +#define DIO6_RPORT PINH +#define DIO6_WPORT PORTH +#define DIO6_DDR DDRH +#define DIO6_PWM &OCR4AL + +#define DIO7_PIN PINH4 +#define DIO7_RPORT PINH +#define DIO7_WPORT PORTH +#define DIO7_DDR DDRH +#define DIO7_PWM &OCR4BL + +#define DIO8_PIN PINH5 +#define DIO8_RPORT PINH +#define DIO8_WPORT PORTH +#define DIO8_DDR DDRH +#define DIO8_PWM &OCR4CL + +#define DIO9_PIN PINH6 +#define DIO9_RPORT PINH +#define DIO9_WPORT PORTH +#define DIO9_DDR DDRH +#define DIO9_PWM &OCR2B + +#define DIO10_PIN PINB4 +#define DIO10_RPORT PINB +#define DIO10_WPORT PORTB +#define DIO10_DDR DDRB +#define DIO10_PWM &OCR2A + +#define DIO11_PIN PINB5 +#define DIO11_RPORT PINB +#define DIO11_WPORT PORTB +#define DIO11_DDR DDRB +#define DIO11_PWM NULL + +#define DIO12_PIN PINB6 +#define DIO12_RPORT PINB +#define DIO12_WPORT PORTB +#define DIO12_DDR DDRB +#define DIO12_PWM NULL + +#define DIO13_PIN PINB7 +#define DIO13_RPORT PINB +#define DIO13_WPORT PORTB +#define DIO13_DDR DDRB +#define DIO13_PWM &OCR0A + +#define DIO14_PIN PINJ1 +#define DIO14_RPORT PINJ +#define DIO14_WPORT PORTJ +#define DIO14_DDR DDRJ +#define DIO14_PWM NULL + +#define DIO15_PIN PINJ0 +#define DIO15_RPORT PINJ +#define DIO15_WPORT PORTJ +#define DIO15_DDR DDRJ +#define DIO15_PWM NULL + +#define DIO16_PIN PINH1 +#define DIO16_RPORT PINH +#define DIO16_WPORT PORTH +#define DIO16_DDR DDRH +#define DIO16_PWM NULL + +#define DIO17_PIN PINH0 +#define DIO17_RPORT PINH +#define DIO17_WPORT PORTH +#define DIO17_DDR DDRH +#define DIO17_PWM NULL + +#define DIO18_PIN PIND3 +#define DIO18_RPORT PIND +#define DIO18_WPORT PORTD +#define DIO18_DDR DDRD +#define DIO18_PWM NULL + +#define DIO19_PIN PIND2 +#define DIO19_RPORT PIND +#define DIO19_WPORT PORTD +#define DIO19_DDR DDRD +#define DIO19_PWM NULL + +#define DIO20_PIN PIND1 +#define DIO20_RPORT PIND +#define DIO20_WPORT PORTD +#define DIO20_DDR DDRD +#define DIO20_PWM NULL + +#define DIO21_PIN PIND0 +#define DIO21_RPORT PIND +#define DIO21_WPORT PORTD +#define DIO21_DDR DDRD +#define DIO21_PWM NULL + +#define DIO22_PIN PINA0 +#define DIO22_RPORT PINA +#define DIO22_WPORT PORTA +#define DIO22_DDR DDRA +#define DIO22_PWM NULL + +#define DIO23_PIN PINA1 +#define DIO23_RPORT PINA +#define DIO23_WPORT PORTA +#define DIO23_DDR DDRA +#define DIO23_PWM NULL + +#define DIO24_PIN PINA2 +#define DIO24_RPORT PINA +#define DIO24_WPORT PORTA +#define DIO24_DDR DDRA +#define DIO24_PWM NULL + +#define DIO25_PIN PINA3 +#define DIO25_RPORT PINA +#define DIO25_WPORT PORTA +#define DIO25_DDR DDRA +#define DIO25_PWM NULL + +#define DIO26_PIN PINA4 +#define DIO26_RPORT PINA +#define DIO26_WPORT PORTA +#define DIO26_DDR DDRA +#define DIO26_PWM NULL + +#define DIO27_PIN PINA5 +#define DIO27_RPORT PINA +#define DIO27_WPORT PORTA +#define DIO27_DDR DDRA +#define DIO27_PWM NULL + +#define DIO28_PIN PINA6 +#define DIO28_RPORT PINA +#define DIO28_WPORT PORTA +#define DIO28_DDR DDRA +#define DIO28_PWM NULL + +#define DIO29_PIN PINA7 +#define DIO29_RPORT PINA +#define DIO29_WPORT PORTA +#define DIO29_DDR DDRA +#define DIO29_PWM NULL + +#define DIO30_PIN PINC7 +#define DIO30_RPORT PINC +#define DIO30_WPORT PORTC +#define DIO30_DDR DDRC +#define DIO30_PWM NULL + +#define DIO31_PIN PINC6 +#define DIO31_RPORT PINC +#define DIO31_WPORT PORTC +#define DIO31_DDR DDRC +#define DIO31_PWM NULL + +#define DIO32_PIN PINC5 +#define DIO32_RPORT PINC +#define DIO32_WPORT PORTC +#define DIO32_DDR DDRC +#define DIO32_PWM NULL + +#define DIO33_PIN PINC4 +#define DIO33_RPORT PINC +#define DIO33_WPORT PORTC +#define DIO33_DDR DDRC +#define DIO33_PWM NULL + +#define DIO34_PIN PINC3 +#define DIO34_RPORT PINC +#define DIO34_WPORT PORTC +#define DIO34_DDR DDRC +#define DIO34_PWM NULL + +#define DIO35_PIN PINC2 +#define DIO35_RPORT PINC +#define DIO35_WPORT PORTC +#define DIO35_DDR DDRC +#define DIO35_PWM NULL + +#define DIO36_PIN PINC1 +#define DIO36_RPORT PINC +#define DIO36_WPORT PORTC +#define DIO36_DDR DDRC +#define DIO36_PWM NULL + +#define DIO37_PIN PINC0 +#define DIO37_RPORT PINC +#define DIO37_WPORT PORTC +#define DIO37_DDR DDRC +#define DIO37_PWM NULL + +#define DIO38_PIN PIND7 +#define DIO38_RPORT PIND +#define DIO38_WPORT PORTD +#define DIO38_DDR DDRD +#define DIO38_PWM NULL + +#define DIO39_PIN PING2 +#define DIO39_RPORT PING +#define DIO39_WPORT PORTG +#define DIO39_DDR DDRG +#define DIO39_PWM NULL + +#define DIO40_PIN PING1 +#define DIO40_RPORT PING +#define DIO40_WPORT PORTG +#define DIO40_DDR DDRG +#define DIO40_PWM NULL + +#define DIO41_PIN PING0 +#define DIO41_RPORT PING +#define DIO41_WPORT PORTG +#define DIO41_DDR DDRG +#define DIO41_PWM NULL + +#define DIO42_PIN PINL7 +#define DIO42_RPORT PINL +#define DIO42_WPORT PORTL +#define DIO42_DDR DDRL +#define DIO42_PWM NULL + +#define DIO43_PIN PINL6 +#define DIO43_RPORT PINL +#define DIO43_WPORT PORTL +#define DIO43_DDR DDRL +#define DIO43_PWM NULL + +#define DIO44_PIN PINL5 +#define DIO44_RPORT PINL +#define DIO44_WPORT PORTL +#define DIO44_DDR DDRL +#define DIO44_PWM &OCR5CL + +#define DIO45_PIN PINL4 +#define DIO45_RPORT PINL +#define DIO45_WPORT PORTL +#define DIO45_DDR DDRL +#define DIO45_PWM &OCR5BL + +#define DIO46_PIN PINL3 +#define DIO46_RPORT PINL +#define DIO46_WPORT PORTL +#define DIO46_DDR DDRL +#define DIO46_PWM &OCR5AL + +#define DIO47_PIN PINL2 +#define DIO47_RPORT PINL +#define DIO47_WPORT PORTL +#define DIO47_DDR DDRL +#define DIO47_PWM NULL + +#define DIO48_PIN PINL1 +#define DIO48_RPORT PINL +#define DIO48_WPORT PORTL +#define DIO48_DDR DDRL +#define DIO48_PWM NULL + +#define DIO49_PIN PINL0 +#define DIO49_RPORT PINL +#define DIO49_WPORT PORTL +#define DIO49_DDR DDRL +#define DIO49_PWM NULL + +#define DIO50_PIN PINB3 +#define DIO50_RPORT PINB +#define DIO50_WPORT PORTB +#define DIO50_DDR DDRB +#define DIO50_PWM NULL + +#define DIO51_PIN PINB2 +#define DIO51_RPORT PINB +#define DIO51_WPORT PORTB +#define DIO51_DDR DDRB +#define DIO51_PWM NULL + +#define DIO52_PIN PINB1 +#define DIO52_RPORT PINB +#define DIO52_WPORT PORTB +#define DIO52_DDR DDRB +#define DIO52_PWM NULL + +#define DIO53_PIN PINB0 +#define DIO53_RPORT PINB +#define DIO53_WPORT PORTB +#define DIO53_DDR DDRB +#define DIO53_PWM NULL + +#define DIO54_PIN PINF0 +#define DIO54_RPORT PINF +#define DIO54_WPORT PORTF +#define DIO54_DDR DDRF +#define DIO54_PWM NULL + +#define DIO55_PIN PINF1 +#define DIO55_RPORT PINF +#define DIO55_WPORT PORTF +#define DIO55_DDR DDRF +#define DIO55_PWM NULL + +#define DIO56_PIN PINF2 +#define DIO56_RPORT PINF +#define DIO56_WPORT PORTF +#define DIO56_DDR DDRF +#define DIO56_PWM NULL + +#define DIO57_PIN PINF3 +#define DIO57_RPORT PINF +#define DIO57_WPORT PORTF +#define DIO57_DDR DDRF +#define DIO57_PWM NULL + +#define DIO58_PIN PINF4 +#define DIO58_RPORT PINF +#define DIO58_WPORT PORTF +#define DIO58_DDR DDRF +#define DIO58_PWM NULL + +#define DIO59_PIN PINF5 +#define DIO59_RPORT PINF +#define DIO59_WPORT PORTF +#define DIO59_DDR DDRF +#define DIO59_PWM NULL + +#define DIO60_PIN PINF6 +#define DIO60_RPORT PINF +#define DIO60_WPORT PORTF +#define DIO60_DDR DDRF +#define DIO60_PWM NULL + +#define DIO61_PIN PINF7 +#define DIO61_RPORT PINF +#define DIO61_WPORT PORTF +#define DIO61_DDR DDRF +#define DIO61_PWM NULL + +#define DIO62_PIN PINK0 +#define DIO62_RPORT PINK +#define DIO62_WPORT PORTK +#define DIO62_DDR DDRK +#define DIO62_PWM NULL + +#define DIO63_PIN PINK1 +#define DIO63_RPORT PINK +#define DIO63_WPORT PORTK +#define DIO63_DDR DDRK +#define DIO63_PWM NULL + +#define DIO64_PIN PINK2 +#define DIO64_RPORT PINK +#define DIO64_WPORT PORTK +#define DIO64_DDR DDRK +#define DIO64_PWM NULL + +#define DIO65_PIN PINK3 +#define DIO65_RPORT PINK +#define DIO65_WPORT PORTK +#define DIO65_DDR DDRK +#define DIO65_PWM NULL + +#define DIO66_PIN PINK4 +#define DIO66_RPORT PINK +#define DIO66_WPORT PORTK +#define DIO66_DDR DDRK +#define DIO66_PWM NULL + +#define DIO67_PIN PINK5 +#define DIO67_RPORT PINK +#define DIO67_WPORT PORTK +#define DIO67_DDR DDRK +#define DIO67_PWM NULL + +#define DIO68_PIN PINK6 +#define DIO68_RPORT PINK +#define DIO68_WPORT PORTK +#define DIO68_DDR DDRK +#define DIO68_PWM NULL + +#define DIO69_PIN PINK7 +#define DIO69_RPORT PINK +#define DIO69_WPORT PORTK +#define DIO69_DDR DDRK +#define DIO69_PWM NULL + + + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_DDR DDRA +#define PA0_PWM NULL +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_DDR DDRA +#define PA1_PWM NULL +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_DDR DDRA +#define PA2_PWM NULL +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_DDR DDRA +#define PA3_PWM NULL +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_DDR DDRA +#define PA4_PWM NULL +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_DDR DDRA +#define PA5_PWM NULL +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_DDR DDRA +#define PA6_PWM NULL +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_DDR DDRA +#define PA7_PWM NULL + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_DDR DDRB +#define PB0_PWM NULL +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_DDR DDRB +#define PB1_PWM NULL +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_DDR DDRB +#define PB2_PWM NULL +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_DDR DDRB +#define PB3_PWM NULL +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_DDR DDRB +#define PB4_PWM &OCR2A +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_DDR DDRB +#define PB5_PWM NULL +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_DDR DDRB +#define PB6_PWM NULL +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_DDR DDRB +#define PB7_PWM &OCR0A + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_DDR DDRC +#define PC0_PWM NULL +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_DDR DDRC +#define PC1_PWM NULL +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_DDR DDRC +#define PC2_PWM NULL +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_DDR DDRC +#define PC3_PWM NULL +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_DDR DDRC +#define PC4_PWM NULL +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_DDR DDRC +#define PC5_PWM NULL +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_DDR DDRC +#define PC6_PWM NULL +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_DDR DDRC +#define PC7_PWM NULL + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_DDR DDRD +#define PD0_PWM NULL +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_DDR DDRD +#define PD1_PWM NULL +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_DDR DDRD +#define PD2_PWM NULL +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_DDR DDRD +#define PD3_PWM NULL +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_DDR DDRD +#define PD4_PWM NULL +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_DDR DDRD +#define PD5_PWM NULL +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_DDR DDRD +#define PD6_PWM NULL +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_DDR DDRD +#define PD7_PWM NULL + +#undef PE0 +#define PE0_PIN PINE0 +#define PE0_RPORT PINE +#define PE0_WPORT PORTE +#define PE0_DDR DDRE +#define PE0_PWM NULL +#undef PE1 +#define PE1_PIN PINE1 +#define PE1_RPORT PINE +#define PE1_WPORT PORTE +#define PE1_DDR DDRE +#define PE1_PWM NULL +#undef PE2 +#define PE2_PIN PINE2 +#define PE2_RPORT PINE +#define PE2_WPORT PORTE +#define PE2_DDR DDRE +#define PE2_PWM NULL +#undef PE3 +#define PE3_PIN PINE3 +#define PE3_RPORT PINE +#define PE3_WPORT PORTE +#define PE3_DDR DDRE +#define PE3_PWM &OCR3AL +#undef PE4 +#define PE4_PIN PINE4 +#define PE4_RPORT PINE +#define PE4_WPORT PORTE +#define PE4_DDR DDRE +#define PE4_PWM &OCR3BL +#undef PE5 +#define PE5_PIN PINE5 +#define PE5_RPORT PINE +#define PE5_WPORT PORTE +#define PE5_DDR DDRE +#define PE5_PWM &OCR3CL +#undef PE6 +#define PE6_PIN PINE6 +#define PE6_RPORT PINE +#define PE6_WPORT PORTE +#define PE6_DDR DDRE +#define PE6_PWM NULL +#undef PE7 +#define PE7_PIN PINE7 +#define PE7_RPORT PINE +#define PE7_WPORT PORTE +#define PE7_DDR DDRE +#define PE7_PWM NULL + +#undef PF0 +#define PF0_PIN PINF0 +#define PF0_RPORT PINF +#define PF0_WPORT PORTF +#define PF0_DDR DDRF +#define PF0_PWM NULL +#undef PF1 +#define PF1_PIN PINF1 +#define PF1_RPORT PINF +#define PF1_WPORT PORTF +#define PF1_DDR DDRF +#define PF1_PWM NULL +#undef PF2 +#define PF2_PIN PINF2 +#define PF2_RPORT PINF +#define PF2_WPORT PORTF +#define PF2_DDR DDRF +#define PF2_PWM NULL +#undef PF3 +#define PF3_PIN PINF3 +#define PF3_RPORT PINF +#define PF3_WPORT PORTF +#define PF3_DDR DDRF +#define PF3_PWM NULL +#undef PF4 +#define PF4_PIN PINF4 +#define PF4_RPORT PINF +#define PF4_WPORT PORTF +#define PF4_DDR DDRF +#define PF4_PWM NULL +#undef PF5 +#define PF5_PIN PINF5 +#define PF5_RPORT PINF +#define PF5_WPORT PORTF +#define PF5_DDR DDRF +#define PF5_PWM NULL +#undef PF6 +#define PF6_PIN PINF6 +#define PF6_RPORT PINF +#define PF6_WPORT PORTF +#define PF6_DDR DDRF +#define PF6_PWM NULL +#undef PF7 +#define PF7_PIN PINF7 +#define PF7_RPORT PINF +#define PF7_WPORT PORTF +#define PF7_DDR DDRF +#define PF7_PWM NULL + +#undef PG0 +#define PG0_PIN PING0 +#define PG0_RPORT PING +#define PG0_WPORT PORTG +#define PG0_DDR DDRG +#define PG0_PWM NULL +#undef PG1 +#define PG1_PIN PING1 +#define PG1_RPORT PING +#define PG1_WPORT PORTG +#define PG1_DDR DDRG +#define PG1_PWM NULL +#undef PG2 +#define PG2_PIN PING2 +#define PG2_RPORT PING +#define PG2_WPORT PORTG +#define PG2_DDR DDRG +#define PG2_PWM NULL +#undef PG3 +#define PG3_PIN PING3 +#define PG3_RPORT PING +#define PG3_WPORT PORTG +#define PG3_DDR DDRG +#define PG3_PWM NULL +#undef PG4 +#define PG4_PIN PING4 +#define PG4_RPORT PING +#define PG4_WPORT PORTG +#define PG4_DDR DDRG +#define PG4_PWM NULL +#undef PG5 +#define PG5_PIN PING5 +#define PG5_RPORT PING +#define PG5_WPORT PORTG +#define PG5_DDR DDRG +#define PG5_PWM &OCR0B +#undef PG6 +#define PG6_PIN PING6 +#define PG6_RPORT PING +#define PG6_WPORT PORTG +#define PG6_DDR DDRG +#define PG6_PWM NULL +#undef PG7 +#define PG7_PIN PING7 +#define PG7_RPORT PING +#define PG7_WPORT PORTG +#define PG7_DDR DDRG +#define PG7_PWM NULL + +#undef PH0 +#define PH0_PIN PINH0 +#define PH0_RPORT PINH +#define PH0_WPORT PORTH +#define PH0_DDR DDRH +#define PH0_PWM NULL +#undef PH1 +#define PH1_PIN PINH1 +#define PH1_RPORT PINH +#define PH1_WPORT PORTH +#define PH1_DDR DDRH +#define PH1_PWM NULL +#undef PH2 +#define PH2_PIN PINH2 +#define PH2_RPORT PINH +#define PH2_WPORT PORTH +#define PH2_DDR DDRH +#define PH2_PWM NULL +#undef PH3 +#define PH3_PIN PINH3 +#define PH3_RPORT PINH +#define PH3_WPORT PORTH +#define PH3_DDR DDRH +#define PH3_PWM &OCR4AL +#undef PH4 +#define PH4_PIN PINH4 +#define PH4_RPORT PINH +#define PH4_WPORT PORTH +#define PH4_DDR DDRH +#define PH4_PWM &OCR4BL +#undef PH5 +#define PH5_PIN PINH5 +#define PH5_RPORT PINH +#define PH5_WPORT PORTH +#define PH5_DDR DDRH +#define PH5_PWM &OCR4CL +#undef PH6 +#define PH6_PIN PINH6 +#define PH6_RPORT PINH +#define PH6_WPORT PORTH +#define PH6_DDR DDRH +#define PH6_PWM &OCR2B +#undef PH7 +#define PH7_PIN PINH7 +#define PH7_RPORT PINH +#define PH7_WPORT PORTH +#define PH7_DDR DDRH +#define PH7_PWM NULL + +#undef PJ0 +#define PJ0_PIN PINJ0 +#define PJ0_RPORT PINJ +#define PJ0_WPORT PORTJ +#define PJ0_DDR DDRJ +#define PJ0_PWM NULL +#undef PJ1 +#define PJ1_PIN PINJ1 +#define PJ1_RPORT PINJ +#define PJ1_WPORT PORTJ +#define PJ1_DDR DDRJ +#define PJ1_PWM NULL +#undef PJ2 +#define PJ2_PIN PINJ2 +#define PJ2_RPORT PINJ +#define PJ2_WPORT PORTJ +#define PJ2_DDR DDRJ +#define PJ2_PWM NULL +#undef PJ3 +#define PJ3_PIN PINJ3 +#define PJ3_RPORT PINJ +#define PJ3_WPORT PORTJ +#define PJ3_DDR DDRJ +#define PJ3_PWM NULL +#undef PJ4 +#define PJ4_PIN PINJ4 +#define PJ4_RPORT PINJ +#define PJ4_WPORT PORTJ +#define PJ4_DDR DDRJ +#define PJ4_PWM NULL +#undef PJ5 +#define PJ5_PIN PINJ5 +#define PJ5_RPORT PINJ +#define PJ5_WPORT PORTJ +#define PJ5_DDR DDRJ +#define PJ5_PWM NULL +#undef PJ6 +#define PJ6_PIN PINJ6 +#define PJ6_RPORT PINJ +#define PJ6_WPORT PORTJ +#define PJ6_DDR DDRJ +#define PJ6_PWM NULL +#undef PJ7 +#define PJ7_PIN PINJ7 +#define PJ7_RPORT PINJ +#define PJ7_WPORT PORTJ +#define PJ7_DDR DDRJ +#define PJ7_PWM NULL + +#undef PK0 +#define PK0_PIN PINK0 +#define PK0_RPORT PINK +#define PK0_WPORT PORTK +#define PK0_DDR DDRK +#define PK0_PWM NULL +#undef PK1 +#define PK1_PIN PINK1 +#define PK1_RPORT PINK +#define PK1_WPORT PORTK +#define PK1_DDR DDRK +#define PK1_PWM NULL +#undef PK2 +#define PK2_PIN PINK2 +#define PK2_RPORT PINK +#define PK2_WPORT PORTK +#define PK2_DDR DDRK +#define PK2_PWM NULL +#undef PK3 +#define PK3_PIN PINK3 +#define PK3_RPORT PINK +#define PK3_WPORT PORTK +#define PK3_DDR DDRK +#define PK3_PWM NULL +#undef PK4 +#define PK4_PIN PINK4 +#define PK4_RPORT PINK +#define PK4_WPORT PORTK +#define PK4_DDR DDRK +#define PK4_PWM NULL +#undef PK5 +#define PK5_PIN PINK5 +#define PK5_RPORT PINK +#define PK5_WPORT PORTK +#define PK5_DDR DDRK +#define PK5_PWM NULL +#undef PK6 +#define PK6_PIN PINK6 +#define PK6_RPORT PINK +#define PK6_WPORT PORTK +#define PK6_DDR DDRK +#define PK6_PWM NULL +#undef PK7 +#define PK7_PIN PINK7 +#define PK7_RPORT PINK +#define PK7_WPORT PORTK +#define PK7_DDR DDRK +#define PK7_PWM NULL + +#undef PL0 +#define PL0_PIN PINL0 +#define PL0_RPORT PINL +#define PL0_WPORT PORTL +#define PL0_DDR DDRL +#define PL0_PWM NULL +#undef PL1 +#define PL1_PIN PINL1 +#define PL1_RPORT PINL +#define PL1_WPORT PORTL +#define PL1_DDR DDRL +#define PL1_PWM NULL +#undef PL2 +#define PL2_PIN PINL2 +#define PL2_RPORT PINL +#define PL2_WPORT PORTL +#define PL2_DDR DDRL +#define PL2_PWM NULL +#undef PL3 +#define PL3_PIN PINL3 +#define PL3_RPORT PINL +#define PL3_WPORT PORTL +#define PL3_DDR DDRL +#define PL3_PWM &OCR5AL +#undef PL4 +#define PL4_PIN PINL4 +#define PL4_RPORT PINL +#define PL4_WPORT PORTL +#define PL4_DDR DDRL +#define PL4_PWM &OCR5BL +#undef PL5 +#define PL5_PIN PINL5 +#define PL5_RPORT PINL +#define PL5_WPORT PORTL +#define PL5_DDR DDRL +#define PL5_PWM &OCR5CL +#undef PL6 +#define PL6_PIN PINL6 +#define PL6_RPORT PINL +#define PL6_WPORT PORTL +#define PL6_DDR DDRL +#define PL6_PWM NULL +#undef PL7 +#define PL7_PIN PINL7 +#define PL7_RPORT PINL +#define PL7_WPORT PORTL +#define PL7_DDR DDRL +#define PL7_PWM NULL + +#endif + +#if defined (__AVR_AT90USB1287__) || defined (__AVR_AT90USB1286__) +// SPI +#define SCK DIO9 +#define MISO DIO11 +#define MOSI DIO10 +#define SS DIO8 + +// change for your board +#define DEBUG_LED DIO31 /* led D5 red */ + +/* +pins +*/ +#define DIO0_PIN PINA0 +#define DIO0_RPORT PINA +#define DIO0_WPORT PORTA +#define DIO0_PWM NULL +#define DIO0_DDR DDRA + +#define DIO1_PIN PINA1 +#define DIO1_RPORT PINA +#define DIO1_WPORT PORTA +#define DIO1_PWM NULL +#define DIO1_DDR DDRA + +#define DIO2_PIN PINA2 +#define DIO2_RPORT PINA +#define DIO2_WPORT PORTA +#define DIO2_PWM NULL +#define DIO2_DDR DDRA + +#define DIO3_PIN PINA3 +#define DIO3_RPORT PINA +#define DIO3_WPORT PORTA +#define DIO3_PWM NULL +#define DIO3_DDR DDRA + +#define DIO4_PIN PINA4 +#define DIO4_RPORT PINA +#define DIO4_WPORT PORTA +#define DIO4_PWM NULL +#define DIO4_DDR DDRA + +#define DIO5_PIN PINA5 +#define DIO5_RPORT PINA +#define DIO5_WPORT PORTA +#define DIO5_PWM NULL +#define DIO5_DDR DDRA + +#define DIO6_PIN PINA6 +#define DIO6_RPORT PINA +#define DIO6_WPORT PORTA +#define DIO6_PWM NULL +#define DIO6_DDR DDRA + +#define DIO7_PIN PINA7 +#define DIO7_RPORT PINA +#define DIO7_WPORT PORTA +#define DIO7_PWM NULL +#define DIO7_DDR DDRA + +#define DIO8_PIN PINB0 +#define DIO8_RPORT PINB +#define DIO8_WPORT PORTB +#define DIO8_PWM NULL +#define DIO8_DDR DDRB + +#define DIO9_PIN PINB1 +#define DIO9_RPORT PINB +#define DIO9_WPORT PORTB +#define DIO9_PWM NULL +#define DIO9_DDR DDRB + +#define DIO10_PIN PINB2 +#define DIO10_RPORT PINB +#define DIO10_WPORT PORTB +#define DIO10_PWM NULL +#define DIO10_DDR DDRB + +#define DIO11_PIN PINB3 +#define DIO11_RPORT PINB +#define DIO11_WPORT PORTB +#define DIO11_PWM NULL +#define DIO11_DDR DDRB + +#define DIO12_PIN PINB4 +#define DIO12_RPORT PINB +#define DIO12_WPORT PORTB +#define DIO12_PWM NULL +#define DIO12_DDR DDRB + +#define DIO13_PIN PINB5 +#define DIO13_RPORT PINB +#define DIO13_WPORT PORTB +#define DIO13_PWM NULL +#define DIO13_DDR DDRB + +#define DIO14_PIN PINB6 +#define DIO14_RPORT PINB +#define DIO14_WPORT PORTB +#define DIO14_PWM NULL +#define DIO14_DDR DDRB + +#define DIO15_PIN PINB7 +#define DIO15_RPORT PINB +#define DIO15_WPORT PORTB +#define DIO15_PWM NULL +#define DIO15_DDR DDRB + +#define DIO16_PIN PINC0 +#define DIO16_RPORT PINC +#define DIO16_WPORT PORTC +#define DIO16_PWM NULL +#define DIO16_DDR DDRC + +#define DIO17_PIN PINC1 +#define DIO17_RPORT PINC +#define DIO17_WPORT PORTC +#define DIO17_PWM NULL +#define DIO17_DDR DDRC + +#define DIO18_PIN PINC2 +#define DIO18_RPORT PINC +#define DIO18_WPORT PORTC +#define DIO18_PWM NULL +#define DIO18_DDR DDRC + +#define DIO19_PIN PINC3 +#define DIO19_RPORT PINC +#define DIO19_WPORT PORTC +#define DIO19_PWM NULL +#define DIO19_DDR DDRC + +#define DIO20_PIN PINC4 +#define DIO20_RPORT PINC +#define DIO20_WPORT PORTC +#define DIO20_PWM NULL +#define DIO20_DDR DDRC + +#define DIO21_PIN PINC5 +#define DIO21_RPORT PINC +#define DIO21_WPORT PORTC +#define DIO21_PWM NULL +#define DIO21_DDR DDRC + +#define DIO22_PIN PINC6 +#define DIO22_RPORT PINC +#define DIO22_WPORT PORTC +#define DIO22_PWM NULL +#define DIO22_DDR DDRC + +#define DIO23_PIN PINC7 +#define DIO23_RPORT PINC +#define DIO23_WPORT PORTC +#define DIO23_PWM NULL +#define DIO23_DDR DDRC + +#define DIO24_PIN PIND0 +#define DIO24_RPORT PIND +#define DIO24_WPORT PORTD +#define DIO24_PWM NULL +#define DIO24_DDR DDRD + +#define DIO25_PIN PIND1 +#define DIO25_RPORT PIND +#define DIO25_WPORT PORTD +#define DIO25_PWM NULL +#define DIO25_DDR DDRD + +#define DIO26_PIN PIND2 +#define DIO26_RPORT PIND +#define DIO26_WPORT PORTD +#define DIO26_PWM NULL +#define DIO26_DDR DDRD + +#define DIO27_PIN PIND3 +#define DIO27_RPORT PIND +#define DIO27_WPORT PORTD +#define DIO27_PWM NULL +#define DIO27_DDR DDRD + +#define DIO28_PIN PIND4 +#define DIO28_RPORT PIND +#define DIO28_WPORT PORTD +#define DIO28_PWM NULL +#define DIO28_DDR DDRD + +#define DIO29_PIN PIND5 +#define DIO29_RPORT PIND +#define DIO29_WPORT PORTD +#define DIO29_PWM NULL +#define DIO29_DDR DDRD + +#define DIO30_PIN PIND6 +#define DIO30_RPORT PIND +#define DIO30_WPORT PORTD +#define DIO30_PWM NULL +#define DIO30_DDR DDRD + +#define DIO31_PIN PIND7 +#define DIO31_RPORT PIND +#define DIO31_WPORT PORTD +#define DIO31_PWM NULL +#define DIO31_DDR DDRD + + +#define DIO32_PIN PINE0 +#define DIO32_RPORT PINE +#define DIO32_WPORT PORTE +#define DIO32_PWM NULL +#define DIO32_DDR DDRE + +#define DIO33_PIN PINE1 +#define DIO33_RPORT PINE +#define DIO33_WPORT PORTE +#define DIO33_PWM NULL +#define DIO33_DDR DDRE + +#define DIO34_PIN PINE2 +#define DIO34_RPORT PINE +#define DIO34_WPORT PORTE +#define DIO34_PWM NULL +#define DIO34_DDR DDRE + +#define DIO35_PIN PINE3 +#define DIO35_RPORT PINE +#define DIO35_WPORT PORTE +#define DIO35_PWM NULL +#define DIO35_DDR DDRE + +#define DIO36_PIN PINE4 +#define DIO36_RPORT PINE +#define DIO36_WPORT PORTE +#define DIO36_PWM NULL +#define DIO36_DDR DDRE + +#define DIO37_PIN PINE5 +#define DIO37_RPORT PINE +#define DIO37_WPORT PORTE +#define DIO37_PWM NULL +#define DIO37_DDR DDRE + +#define DIO38_PIN PINE6 +#define DIO38_RPORT PINE +#define DIO38_WPORT PORTE +#define DIO38_PWM NULL +#define DIO38_DDR DDRE + +#define DIO39_PIN PINE7 +#define DIO39_RPORT PINE +#define DIO39_WPORT PORTE +#define DIO39_PWM NULL +#define DIO39_DDR DDRE + +#define AIO0_PIN PINF0 +#define AIO0_RPORT PINF +#define AIO0_WPORT PORTF +#define AIO0_PWM NULL +#define AIO0_DDR DDRF + +#define AIO1_PIN PINF1 +#define AIO1_RPORT PINF +#define AIO1_WPORT PORTF +#define AIO1_PWM NULL +#define AIO1_DDR DDRF + +#define AIO2_PIN PINF2 +#define AIO2_RPORT PINF +#define AIO2_WPORT PORTF +#define AIO2_PWM NULL +#define AIO2_DDR DDRF + +#define AIO3_PIN PINF3 +#define AIO3_RPORT PINF +#define AIO3_WPORT PORTF +#define AIO3_PWM NULL +#define AIO3_DDR DDRF + +#define AIO4_PIN PINF4 +#define AIO4_RPORT PINF +#define AIO4_WPORT PORTF +#define AIO4_PWM NULL +#define AIO4_DDR DDRF + +#define AIO5_PIN PINF5 +#define AIO5_RPORT PINF +#define AIO5_WPORT PORTF +#define AIO5_PWM NULL +#define AIO5_DDR DDRF + +#define AIO6_PIN PINF6 +#define AIO6_RPORT PINF +#define AIO6_WPORT PORTF +#define AIO6_PWM NULL +#define AIO6_DDR DDRF + +#define AIO7_PIN PINF7 +#define AIO7_RPORT PINF +#define AIO7_WPORT PORTF +#define AIO7_PWM NULL +#define AIO7_DDR DDRF + +#define DIO40_PIN PINF0 +#define DIO40_RPORT PINF +#define DIO40_WPORT PORTF +#define DIO40_PWM NULL +#define DIO40_DDR DDRF + +#define DIO41_PIN PINF1 +#define DIO41_RPORT PINF +#define DIO41_WPORT PORTF +#define DIO41_PWM NULL +#define DIO41_DDR DDRF + +#define DIO42_PIN PINF2 +#define DIO42_RPORT PINF +#define DIO42_WPORT PORTF +#define DIO42_PWM NULL +#define DIO42_DDR DDRF + +#define DIO43_PIN PINF3 +#define DIO43_RPORT PINF +#define DIO43_WPORT PORTF +#define DIO43_PWM NULL +#define DIO43_DDR DDRF + +#define DIO44_PIN PINF4 +#define DIO44_RPORT PINF +#define DIO44_WPORT PORTF +#define DIO44_PWM NULL +#define DIO44_DDR DDRF + +#define DIO45_PIN PINF5 +#define DIO45_RPORT PINF +#define DIO45_WPORT PORTF +#define DIO45_PWM NULL +#define DIO45_DDR DDRF + +#define DIO46_PIN PINF6 +#define DIO46_RPORT PINF +#define DIO46_WPORT PORTF +#define DIO46_PWM NULL +#define DIO46_DDR DDRF + +#define DIO47_PIN PINF7 +#define DIO47_RPORT PINF +#define DIO47_WPORT PORTF +#define DIO47_PWM NULL +#define DIO47_DDR DDRF + + + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_PWM NULL +#define PA0_DDR DDRA +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_PWM NULL +#define PA1_DDR DDRA +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_PWM NULL +#define PA2_DDR DDRA +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_PWM NULL +#define PA3_DDR DDRA +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_PWM NULL +#define PA4_DDR DDRA +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_PWM NULL +#define PA5_DDR DDRA +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_PWM NULL +#define PA6_DDR DDRA +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_PWM NULL +#define PA7_DDR DDRA + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_PWM NULL +#define PB0_DDR DDRB +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_PWM NULL +#define PB1_DDR DDRB +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_PWM NULL +#define PB2_DDR DDRB +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_PWM NULL +#define PB3_DDR DDRB +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_PWM NULL +#define PB4_DDR DDRB +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_PWM NULL +#define PB5_DDR DDRB +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_PWM NULL +#define PB6_DDR DDRB +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_PWM NULL +#define PB7_DDR DDRB + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_PWM NULL +#define PC0_DDR DDRC +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_PWM NULL +#define PC1_DDR DDRC +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_PWM NULL +#define PC2_DDR DDRC +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_PWM NULL +#define PC3_DDR DDRC +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_PWM NULL +#define PC4_DDR DDRC +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_PWM NULL +#define PC5_DDR DDRC +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_PWM NULL +#define PC6_DDR DDRC +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_PWM NULL +#define PC7_DDR DDRC + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_PWM NULL +#define PD0_DDR DDRD +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_PWM NULL +#define PD1_DDR DDRD +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_PWM NULL +#define PD2_DDR DDRD +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_PWM NULL +#define PD3_DDR DDRD +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_PWM NULL +#define PD4_DDR DDRD +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_PWM NULL +#define PD5_DDR DDRD +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_PWM NULL +#define PD6_DDR DDRD +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_PWM NULL +#define PD7_DDR DDRD + +#undef PE0 +#define PE0_PIN PINE0 +#define PE0_RPORT PINE +#define PE0_WPORT PORTE +#define PE0_PWM NULL +#define PE0_DDR DDRE +#undef PE1 +#define PE1_PIN PINE1 +#define PE1_RPORT PINE +#define PE1_WPORT PORTE +#define PE1_PWM NULL +#define PE1_DDR DDRE +#undef PE2 +#define PE2_PIN PINE2 +#define PE2_RPORT PINE +#define PE2_WPORT PORTE +#define PE2_PWM NULL +#define PE2_DDR DDRE +#undef PE3 +#define PE3_PIN PINE3 +#define PE3_RPORT PINE +#define PE3_WPORT PORTE +#define PE3_PWM NULL +#define PE3_DDR DDRE +#undef PE4 +#define PE4_PIN PINE4 +#define PE4_RPORT PINE +#define PE4_WPORT PORTE +#define PE4_PWM NULL +#define PE4_DDR DDRE +#undef PE5 +#define PE5_PIN PINE5 +#define PE5_RPORT PINE +#define PE5_WPORT PORTE +#define PE5_PWM NULL +#define PE5_DDR DDRE +#undef PE6 +#define PE6_PIN PINE6 +#define PE6_RPORT PINE +#define PE6_WPORT PORTE +#define PE6_PWM NULL +#define PE6_DDR DDRE +#undef PE7 +#define PE7_PIN PINE7 +#define PE7_RPORT PINE +#define PE7_WPORT PORTE +#define PE7_PWM NULL +#define PE7_DDR DDRE + +#undef PF0 +#define PF0_PIN PINF0 +#define PF0_RPORT PINF +#define PF0_WPORT PORTF +#define PF0_PWM NULL +#define PF0_DDR DDRF +#undef PF1 +#define PF1_PIN PINF1 +#define PF1_RPORT PINF +#define PF1_WPORT PORTF +#define PF1_PWM NULL +#define PF1_DDR DDRF +#undef PF2 +#define PF2_PIN PINF2 +#define PF2_RPORT PINF +#define PF2_WPORT PORTF +#define PF2_PWM NULL +#define PF2_DDR DDRF +#undef PF3 +#define PF3_PIN PINF3 +#define PF3_RPORT PINF +#define PF3_WPORT PORTF +#define PF3_PWM NULL +#define PF3_DDR DDRF +#undef PF4 +#define PF4_PIN PINF4 +#define PF4_RPORT PINF +#define PF4_WPORT PORTF +#define PF4_PWM NULL +#define PF4_DDR DDRF +#undef PF5 +#define PF5_PIN PINF5 +#define PF5_RPORT PINF +#define PF5_WPORT PORTF +#define PF5_PWM NULL +#define PF5_DDR DDRF +#undef PF6 +#define PF6_PIN PINF6 +#define PF6_RPORT PINF +#define PF6_WPORT PORTF +#define PF6_PWM NULL +#define PF6_DDR DDRF +#undef PF7 +#define PF7_PIN PINF7 +#define PF7_RPORT PINF +#define PF7_WPORT PORTF +#define PF7_PWM NULL +#define PF7_DDR DDRF +#endif + +#ifndef DIO0_PIN +#error pins for this chip not defined in arduino.h! If you write an appropriate pin definition and have this firmware work on your chip, please submit a pull request +#endif + +#endif /* _ARDUINO_H */ diff --git a/Marlin/Marlin/hardware/tools/avr/etc/avrdude.conf b/Marlin/Marlin/hardware/tools/avr/etc/avrdude.conf new file mode 100644 index 0000000000..ec921df42f --- /dev/null +++ b/Marlin/Marlin/hardware/tools/avr/etc/avrdude.conf @@ -0,0 +1,12104 @@ +# $Id: avrdude.conf.in,v 1.122 2007/05/16 21:29:36 joerg_wunsch Exp $ +# +# AVRDUDE Configuration File +# +# This file contains configuration data used by AVRDUDE which describes +# the programming hardware pinouts and also provides part definitions. +# AVRDUDE's "-C" command line option specifies the location of the +# configuration file. The "-c" option names the programmer configuration +# which must match one of the entry's "id" parameter. The "-p" option +# identifies which part AVRDUDE is going to be programming and must match +# one of the parts' "id" parameter. +# +# Possible entry formats are: +# +# programmer +# id = [, [, ] ...] ; # are quoted strings +# desc = ; # quoted string +# type = par | stk500 | stk500v2 | stk500pp | stk500hvsp | stk500generic | +# avr910 | butterfly | usbasp | +# jtagmki | jtagmkii | jtagmkii_isp | jtagmkii_dw | +# dragon_dw | dragon_jtag | dragon_isp | dragon_pp | +# dragon_hvsp; # programmer type +# baudrate = ; # baudrate for avr910-programmer +# vcc = [, ... ] ; # pin number(s) +# reset = ; # pin number +# sck = ; # pin number +# mosi = ; # pin number +# miso = ; # pin number +# errled = ; # pin number +# rdyled = ; # pin number +# pgmled = ; # pin number +# vfyled = ; # pin number +# ; +# +# part +# id = ; # quoted string +# desc = ; # quoted string +# has_jtag = ; # part has JTAG i/f +# has_debugwire = ; # part has debugWire i/f +# devicecode = ; # deprecated, use stk500_devcode +# stk500_devcode = ; # numeric +# avr910_devcode = ; # numeric +# signature = ; # signature bytes +# chip_erase_delay = ; # micro-seconds +# reset = dedicated | io; +# retry_pulse = reset | sck; +# pgm_enable = ; +# chip_erase = ; +# chip_erase_delay = ; # chip erase delay (us) +# # STK500 parameters (parallel programming IO lines) +# pagel = ; # pin name in hex, i.e., 0xD7 +# bs2 = ; # pin name in hex, i.e., 0xA0 +# serial = ; # can use serial downloading +# parallel = ; # can use par. programming +# # STK500v2 parameters, to be taken from Atmel's XML files +# timeout = ; +# stabdelay = ; +# cmdexedelay = ; +# synchloops = ; +# bytedelay = ; +# pollvalue = ; +# pollindex = ; +# predelay = ; +# postdelay = ; +# pollmethod = ; +# mode = ; +# delay = ; +# blocksize = ; +# readsize = ; +# hvspcmdexedelay = ; +# # STK500v2 HV programming parameters, from XML +# pp_controlstack = , , ...; # PP only +# hvsp_controlstack = , , ...; # HVSP only +# hventerstabdelay = ; +# progmodedelay = ; # PP only +# latchcycles = ; +# togglevtg = ; +# poweroffdelay = ; +# resetdelayms = ; +# resetdelayus = ; +# hvleavestabdelay = ; +# resetdelay = ; +# synchcycles = ; # HVSP only +# chiperasepulsewidth = ; # PP only +# chiperasepolltimeout = ; +# chiperasetime = ; # HVSP only +# programfusepulsewidth = ; # PP only +# programfusepolltimeout = ; +# programlockpulsewidth = ; # PP only +# programlockpolltimeout = ; +# # JTAG ICE mkII parameters, also from XML files +# allowfullpagebitstream = ; +# enablepageprogramming = ; +# idr = ; # IO addr of IDR (OCD) reg. +# rampz = ; # IO addr of RAMPZ reg. +# spmcr = ; # mem addr of SPMC[S]R reg. +# eecr = ; # mem addr of EECR reg. +# # (only when != 0x3c) +# +# memory +# paged = ; # yes / no +# size = ; # bytes +# page_size = ; # bytes +# num_pages = ; # numeric +# min_write_delay = ; # micro-seconds +# max_write_delay = ; # micro-seconds +# readback_p1 = ; # byte value +# readback_p2 = ; # byte value +# pwroff_after_write = ; # yes / no +# read = ; +# write = ; +# read_lo = ; +# read_hi = ; +# write_lo = ; +# write_hi = ; +# loadpage_lo = ; +# loadpage_hi = ; +# writepage = ; +# ; +# ; +# +# If any of the above parameters are not specified, the default value +# of 0 is used for numerics or the empty string ("") for string +# values. If a required parameter is left empty, AVRDUDE will +# complain. +# +# NOTES: +# * 'devicecode' is the device code used by the STK500 (see codes +# listed below) +# * Not all memory types will implement all instructions. +# * AVR Fuse bits and Lock bits are implemented as a type of memory. +# * Example memory types are: +# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high +# fuse), "signature", "calibration", "lock" +# * The memory type specified on the avrdude command line must match +# one of the memory types defined for the specified chip. +# * The pwroff_after_write flag causes avrdude to attempt to +# power the device off and back on after an unsuccessful write to +# the affected memory area if VCC programmer pins are defined. If +# VCC pins are not defined for the programmer, a message +# indicating that the device needs a power-cycle is printed out. +# This flag was added to work around a problem with the +# at90s4433/2333's; see the at90s4433 errata at: +# +# http://www.atmel.com/atmel/acrobat/doc1280.pdf +# +# INSTRUCTION FORMATS +# +# Instruction formats are specified as a comma seperated list of +# string values containing information (bit specifiers) about each +# of the 32 bits of the instruction. Bit specifiers may be one of +# the following formats: +# +# '1' = the bit is always set on input as well as output +# +# '0' = the bit is always clear on input as well as output +# +# 'x' = the bit is ignored on input and output +# +# 'a' = the bit is an address bit, the bit-number matches this bit +# specifier's position within the current instruction byte +# +# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12 +# is address bit 12 on input, a0 is address bit 0. +# +# 'i' = the bit is an input data bit +# +# 'o' = the bit is an output data bit +# +# Each instruction must be composed of 32 bit specifiers. The +# instruction specification closely follows the instruction data +# provided in Atmel's data sheets for their parts. +# +# See below for some examples. +# +# +# The following are STK500 part device codes to use for the +# "devicecode" field of the part. These came from Atmel's software +# section avr061.zip which accompanies the application note +# AVR061 available from: +# +# http://www.atmel.com/atmel/acrobat/doc2525.pdf +# + +#define ATTINY10 0x10 +#define ATTINY11 0x11 +#define ATTINY12 0x12 +#define ATTINY15 0x13 +#define ATTINY13 0x14 + +#define ATTINY22 0x20 +#define ATTINY26 0x21 +#define ATTINY28 0x22 +#define ATTINY2313 0x23 + +#define AT90S1200 0x33 + +#define AT90S2313 0x40 +#define AT90S2323 0x41 +#define AT90S2333 0x42 +#define AT90S2343 0x43 + +#define AT90S4414 0x50 +#define AT90S4433 0x51 +#define AT90S4434 0x52 +#define ATMEGA48 0x59 + +#define AT90S8515 0x60 +#define AT90S8535 0x61 +#define AT90C8534 0x62 +#define ATMEGA8515 0x63 +#define ATMEGA8535 0x64 + +#define ATMEGA8 0x70 +#define ATMEGA88 0x73 +#define ATMEGA168 0x86 + +#define ATMEGA161 0x80 +#define ATMEGA163 0x81 +#define ATMEGA16 0x82 +#define ATMEGA162 0x83 +#define ATMEGA169 0x84 + +#define ATMEGA323 0x90 +#define ATMEGA32 0x91 + +#define ATMEGA64 0xA0 + +#define ATMEGA103 0xB1 +#define ATMEGA128 0xB2 +#define AT90CAN128 0xB3 + +#define AT86RF401 0xD0 + +#define AT89START 0xE0 +#define AT89S51 0xE0 +#define AT89S52 0xE1 + +# The following table lists the devices in the original AVR910 +# appnote: +# |Device |Signature | Code | +# +-------+----------+------+ +# |tiny12 | 1E 90 05 | 0x55 | +# |tiny15 | 1E 90 06 | 0x56 | +# | | | | +# | S1200 | 1E 90 01 | 0x13 | +# | | | | +# | S2313 | 1E 91 01 | 0x20 | +# | S2323 | 1E 91 02 | 0x48 | +# | S2333 | 1E 91 05 | 0x34 | +# | S2343 | 1E 91 03 | 0x4C | +# | | | | +# | S4414 | 1E 92 01 | 0x28 | +# | S4433 | 1E 92 03 | 0x30 | +# | S4434 | 1E 92 02 | 0x6C | +# | | | | +# | S8515 | 1E 93 01 | 0x38 | +# | S8535 | 1E 93 03 | 0x68 | +# | | | | +# |mega32 | 1E 95 01 | 0x72 | +# |mega83 | 1E 93 05 | 0x65 | +# |mega103| 1E 97 01 | 0x41 | +# |mega161| 1E 94 01 | 0x60 | +# |mega163| 1E 94 02 | 0x64 | + +# Appnote AVR109 also has a table of AVR910 device codes, which +# lists: +# dev avr910 signature +# ATmega8 0x77 0x1E 0x93 0x07 +# ATmega8515 0x3B 0x1E 0x93 0x06 +# ATmega8535 0x6A 0x1E 0x93 0x08 +# ATmega16 0x75 0x1E 0x94 0x03 +# ATmega162 0x63 0x1E 0x94 0x04 +# ATmega163 0x66 0x1E 0x94 0x02 +# ATmega169 0x79 0x1E 0x94 0x05 +# ATmega32 0x7F 0x1E 0x95 0x02 +# ATmega323 0x73 0x1E 0x95 0x01 +# ATmega64 0x46 0x1E 0x96 0x02 +# ATmega128 0x44 0x1E 0x97 0x02 +# +# These codes refer to "BOOT" device codes which are apparently +# different than standard device codes, for whatever reasons +# (often one above the standard code). + +# There are several extended versions of AVR910 implementations around +# in the Internet. These add the following codes (only devices that +# actually exist are listed): + +# ATmega8515 0x3A +# ATmega128 0x43 +# ATmega64 0x45 +# ATtiny26 0x5E +# ATmega8535 0x69 +# ATmega32 0x72 +# ATmega16 0x74 +# ATmega8 0x76 +# ATmega169 0x78 + +# +# Overall avrdude defaults +# +default_parallel = "lpt1"; +default_serial = "com1"; + + +# +# PROGRAMMER DEFINITIONS +# + +programmer + id = "avrisp"; + desc = "Atmel AVR ISP"; + type = stk500; +; + +programmer + id = "avrispv2"; + desc = "Atmel AVR ISP V2"; + type = stk500v2; +; + +programmer + id = "avrispmkII"; + desc = "Atmel AVR ISP mkII"; + type = stk500v2; +; + +programmer + id = "avrisp2"; + desc = "Atmel AVR ISP mkII"; + type = stk500v2; +; + +# This is supposed to be the "default" STK500 entry. +# Attempts to select the correct firmware version +# by probing for it. Better use one of the entries +# below instead. +programmer + id = "stk500"; + desc = "Atmel STK500"; + type = stk500generic; +; + +programmer + id = "stk500v1"; + desc = "Atmel STK500 Version 1.x firmware"; + type = stk500; +; + +programmer + id = "stk500v2"; + desc = "Atmel STK500 Version 2.x firmware"; + type = stk500v2; +; + +programmer + id = "stk500pp"; + desc = "Atmel STK500 V2 in parallel programming mode"; + type = stk500pp; +; + +programmer + id = "stk500hvsp"; + desc = "Atmel STK500 V2 in high-voltage serial programming mode"; + type = stk500hvsp; +; + +programmer + id = "avr910"; + desc = "Atmel Low Cost Serial Programmer"; + type = avr910; +; + +programmer + id = "usbasp"; + desc = "USBasp, http://www.fischl.de/usbasp/"; + type = usbasp; +; + +programmer + id = "usbtiny"; + desc = "USBtiny simple USB programmer"; + type = usbtiny; +; + +programmer + id = "butterfly"; + desc = "Atmel Butterfly Development Board"; + type = butterfly; +; + +programmer + id = "avr109"; + desc = "Atmel AppNote AVR109 Boot Loader"; + type = butterfly; +; + +programmer + id = "avr911"; + desc = "Atmel AppNote AVR911 AVROSP"; + type = butterfly; +; + +programmer + id = "jtagmkI"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 115200; # default is 115200 + type = jtagmki; +; + +# easier to type +programmer + id = "jtag1"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 115200; # default is 115200 + type = jtagmki; +; + +# easier to type +programmer + id = "jtag1slow"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 19200; + type = jtagmki; +; + +programmer + id = "jtagmkII"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 19200; # default is 19200 + type = jtagmkii; +; + +# easier to type +programmer + id = "jtag2slow"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 19200; # default is 19200 + type = jtagmkii; +; + +# JTAG ICE mkII @ 115200 Bd +programmer + id = "jtag2fast"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 115200; + type = jtagmkii; +; + +# make the fast one the default, people will love that +programmer + id = "jtag2"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 115200; + type = jtagmkii; +; + +# JTAG ICE mkII in ISP mode +programmer + id = "jtag2isp"; + desc = "Atmel JTAG ICE mkII in ISP mode"; + baudrate = 115200; + type = jtagmkii_isp; +; + +# JTAG ICE mkII in debugWire mode +programmer + id = "jtag2dw"; + desc = "Atmel JTAG ICE mkII in debugWire mode"; + baudrate = 115200; + type = jtagmkii_dw; +; + +# AVR Dragon in JTAG mode +programmer + id = "dragon_jtag"; + desc = "Atmel AVR Dragon in JTAG mode"; + baudrate = 115200; + type = dragon_jtag; +; + +# AVR Dragon in ISP mode +programmer + id = "dragon_isp"; + desc = "Atmel AVR Dragon in ISP mode"; + baudrate = 115200; + type = dragon_isp; +; + +# AVR Dragon in PP mode +programmer + id = "dragon_pp"; + desc = "Atmel AVR Dragon in PP mode"; + baudrate = 115200; + type = dragon_pp; +; + +# AVR Dragon in HVSP mode +programmer + id = "dragon_hvsp"; + desc = "Atmel AVR Dragon in HVSP mode"; + baudrate = 115200; + type = dragon_hvsp; +; + +# AVR Dragon in debugWire mode +programmer + id = "dragon_dw"; + desc = "Atmel AVR Dragon in debugWire mode"; + baudrate = 115200; + type = dragon_dw; +; + +programmer + id = "pavr"; + desc = "Jason Kyle's pAVR Serial Programmer"; + type = avr910; +; + +# Parallel port programmers. + +programmer + id = "bsd"; + desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/"; + type = par; + vcc = 2, 3, 4, 5; + reset = 7; + sck = 8; + mosi = 9; + miso = 10; +; + +programmer + id = "stk200"; + desc = "STK200"; + type = par; + buff = 4, 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; +; + +# The programming dongle used by the popular Ponyprog +# utility. It is almost similar to the STK200 one, +# except that there is a LED indicating that the +# programming is currently in progress. + +programmer + id = "pony-stk200"; + desc = "Pony Prog STK200"; + type = par; + buff = 4, 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; + pgmled = 8; +; + +programmer + id = "dt006"; + desc = "Dontronics DT006"; + type = par; + reset = 4; + sck = 5; + mosi = 2; + miso = 11; +; + +programmer + id = "bascom"; + desc = "Bascom SAMPLE programming cable"; + type = par; + reset = 4; + sck = 5; + mosi = 2; + miso = 11; +; + +programmer + id = "alf"; + desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/"; + type = par; + vcc = 2, 3, 4, 5; + buff = 6; + reset = 7; + sck = 8; + mosi = 9; + miso = 10; + errled = 1; + rdyled = 14; + pgmled = 16; + vfyled = 17; +; + +programmer + id = "sp12"; + desc = "Steve Bolt's Programmer"; + type = par; + vcc = 4,5,6,7,8; + reset = 3; + sck = 2; + mosi = 9; + miso = 11; +; + +programmer + id = "picoweb"; + desc = "Picoweb Programming Cable, http://www.picoweb.net/"; + type = par; + reset = 2; + sck = 3; + mosi = 4; + miso = 13; +; + +programmer + id = "abcmini"; + desc = "ABCmini Board, aka Dick Smith HOTCHIP"; + type = par; + reset = 4; + sck = 3; + mosi = 2; + miso = 10; +; + +programmer + id = "futurlec"; + desc = "Futurlec.com programming cable."; + type = par; + reset = 3; + sck = 2; + mosi = 1; + miso = 10; +; + + +# From the contributor of the "xil" jtag cable: +# The "vcc" definition isn't really vcc (the cable gets its power from +# the programming circuit) but is necessary to switch one of the +# buffer lines (trying to add it to the "buff" lines doesn't work). +# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK +# to SCK (plus vcc/gnd of course) +programmer + id = "xil"; + desc = "Xilinx JTAG cable"; + type = par; + mosi = 2; + sck = 3; + reset = 4; + buff = 5; + miso = 13; + vcc = 6; +; + + +programmer + id = "dapa"; + desc = "Direct AVR Parallel Access cable"; + type = par; + vcc = 3; + reset = 16; + sck = 1; + mosi = 2; + miso = 11; +; + +programmer + id = "atisp"; + desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; + type = par; + reset = ~6; + sck = ~8; + mosi = ~7; + miso = ~10; +; + +programmer + id = "ere-isp-avr"; + desc = "ERE ISP-AVR "; + type = par; + reset = ~4; + sck = 3; + mosi = 2; + miso = 10; +; + +programmer + id = "blaster"; + desc = "Altera ByteBlaster"; + type = par; + sck = 2; + miso = 11; + reset = 3; + mosi = 8; + buff = 14; +; + +# It is almost same as pony-stk200, except vcc on pin 5 to auto +# disconnect port (download on http://electropol.free.fr) +programmer + id = "frank-stk200"; + desc = "Frank STK200"; + type = par; + vcc = 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; + pgmled = 8; +; + + +# +# some ultra cheap programmers use bitbanging on the +# serialport. +# +# PC - DB9 - Pins for RS232: +# +# GND 5 -- |O +# | O| <- 9 RI +# DTR 4 <- |O | +# | O| <- 8 CTS +# TXD 3 <- |O | +# | O| -> 7 RTS +# RXD 2 -> |O | +# | O| <- 6 DSR +# DCD 1 -> |O +# +# Using RXD is currently not supported. +# Using RI is not supported under Win32 but is supported under Posix. + +# serial ponyprog design (dasa2 in uisp) +# reset=!txd sck=rts mosi=dtr miso=cts + +programmer + id = "ponyser"; + desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts"; + type = serbb; + reset = ~3; + sck = 7; + mosi = 4; + miso = 8; +; + +# Same as above, different name +# reset=!txd sck=rts mosi=dtr miso=cts + +programmer + id = "siprog"; + desc = "Lancos SI-Prog "; + type = serbb; + reset = ~3; + sck = 7; + mosi = 4; + miso = 8; +; + +# unknown (dasa in uisp) +# reset=rts sck=dtr mosi=txd miso=cts + +programmer + id = "dasa"; + desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts"; + type = serbb; + reset = 7; + sck = 4; + mosi = 3; + miso = 8; +; + +# unknown (dasa3 in uisp) +# reset=!dtr sck=rts mosi=txd miso=cts + +programmer + id = "dasa3"; + desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts"; + type = serbb; + reset = ~4; + sck = 7; + mosi = 3; + miso = 8; +; + +# +# PART DEFINITIONS +# + +#------------------------------------------------------------ +# ATtiny11 +#------------------------------------------------------------ + +# This is an HVSP-only device. + +part + id = "t11"; + desc = "ATtiny11"; + stk500_devcode = 0x11; + signature = 0x1e 0x90 0x04; + chip_erase_delay = 20000; + + timeout = 200; + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + blocksize = 64; + readsize = 256; + delay = 5; + ; + + memory "flash" + size = 1024; + blocksize = 128; + readsize = 256; + delay = 3; + ; + + memory "signature" + size = 3; + ; + + memory "lock" + size = 1; + ; + + memory "calibration" + size = 1; + ; + + memory "fuse" + size = 1; + ; +; + +#------------------------------------------------------------ +# ATtiny12 +#------------------------------------------------------------ + +part + id = "t12"; + desc = "ATtiny12"; + stk500_devcode = 0x12; + avr910_devcode = 0x55; + signature = 0x1e 0x90 0x05; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 8; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + size = 1024; + min_write_delay = 4500; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +; + +#------------------------------------------------------------ +# ATtiny13 +#------------------------------------------------------------ + +part + id = "t13"; + desc = "ATtiny13"; + has_debugwire = yes; + flash_instr = 0xB4, 0x0E, 0x1E; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x0E, 0xB4, 0x0E, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x14; + signature = 0x1e 0x90 0x07; + chip_erase_delay = 4000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 90; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 1024; + page_size = 32; + num_pages = 32; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny15 +#------------------------------------------------------------ + +part + id = "t15"; + desc = "ATtiny15"; + stk500_devcode = 0x13; + avr910_devcode = 0x56; + signature = 0x1e 0x90 0x06; + chip_erase_delay = 8200; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 5; + synchcycles = 6; + latchcycles = 16; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + min_write_delay = 8200; + max_write_delay = 8200; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + size = 1024; + min_write_delay = 4100; + max_write_delay = 4100; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x o o o o x x o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x i i i i 1 1 i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +; + +#------------------------------------------------------------ +# AT90s1200 +#------------------------------------------------------------ + +part + id = "1200"; + desc = "AT90S1200"; + stk500_devcode = 0x33; + avr910_devcode = 0x13; + signature = 0x1e 0x90 0x01; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 1; + bytedelay = 0; + pollindex = 0; + pollvalue = 0xFF; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 64; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 32; + readsize = 256; + ; + memory "flash" + size = 1024; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x02; + delay = 15; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s4414 +#------------------------------------------------------------ + +part + id = "4414"; + desc = "AT90S4414"; + stk500_devcode = 0x50; + avr910_devcode = 0x28; + signature = 0x1e 0x92 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s2313 +#------------------------------------------------------------ + +part + id = "2313"; + desc = "AT90S2313"; + stk500_devcode = 0x40; + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 128; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 2048; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s2333 +#------------------------------------------------------------ + +part + id = "2333"; +##### WARNING: No XML file for device 'AT90S2333'! ##### + desc = "AT90S2333"; + stk500_devcode = 0x42; + avr910_devcode = 0x34; + signature = 0x1e 0x91 0x05; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + ; + memory "flash" + size = 2048; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + pwroff_after_write = yes; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# ATmega1284P +#------------------------------------------------------------ + +# similar to ATmega164p + +part + id = "m1284p"; + desc = "ATMEGA1284P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x97 0x05; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90s2343 (also AT90s2323 and ATtiny22) +#------------------------------------------------------------ + +part + id = "2343"; + desc = "AT90S2343"; + stk500_devcode = 0x43; + avr910_devcode = 0x4c; + signature = 0x1e 0x91 0x03; + chip_erase_delay = 18000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 0; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 2048; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 128; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o o x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o o x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + + +#------------------------------------------------------------ +# AT90s4433 +#------------------------------------------------------------ + +part + id = "4433"; + desc = "AT90S4433"; + stk500_devcode = 0x51; + avr910_devcode = 0x30; + signature = 0x1e 0x92 0x03; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + pwroff_after_write = yes; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s4434 +#------------------------------------------------------------ + +part + id = "4434"; +##### WARNING: No XML file for device 'AT90S4434'! ##### + desc = "AT90S4434"; + stk500_devcode = 0x52; + avr910_devcode = 0x6c; + signature = 0x1e 0x92 0x02; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s8515 +#------------------------------------------------------------ + +part + id = "8515"; + desc = "AT90S8515"; + stk500_devcode = 0x60; + avr910_devcode = 0x38; + signature = 0x1e 0x93 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 512; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 8192; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s8535 +#------------------------------------------------------------ + +part + id = "8535"; + desc = "AT90S8535"; + stk500_devcode = 0x61; + avr910_devcode = 0x68; + signature = 0x1e 0x93 0x03; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 8192; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x x o"; + write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o x x x x x x"; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# ATmega103 +#------------------------------------------------------------ + +part + id = "m103"; + desc = "ATMEGA103"; + stk500_devcode = 0xB1; + avr910_devcode = 0x41; + signature = 0x1e 0x97 0x01; + chip_erase_delay = 112000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x8E, 0x9E, 0x2E, 0x3E, 0xAE, 0xBE, + 0x4E, 0x5E, 0xCE, 0xDE, 0x6E, 0x7E, 0xEE, 0xDE, + 0x66, 0x76, 0xE6, 0xF6, 0x6A, 0x7A, 0xEA, 0x7A, + 0x7F, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 10; + + memory "eeprom" + size = 4096; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 22000; + max_write_delay = 56000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x11; + delay = 70; + blocksize = 256; + readsize = 256; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o x o 1 o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega64 +#------------------------------------------------------------ + +part + id = "m64"; + desc = "ATMEGA64"; + has_jtag = yes; + stk500_devcode = 0xA0; + avr910_devcode = 0x45; + signature = 0x1e 0x96 0x02; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x22; + spmcr = 0x68; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + + +#------------------------------------------------------------ +# ATmega128 +#------------------------------------------------------------ + +part + id = "m128"; + desc = "ATMEGA128"; + has_jtag = yes; + stk500_devcode = 0xB2; + avr910_devcode = 0x43; + signature = 0x1e 0x97 0x02; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x22; + spmcr = 0x68; + rampz = 0x3b; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN128 +#------------------------------------------------------------ + +part + id = "c128"; + desc = "AT90CAN128"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x97 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega16 +#------------------------------------------------------------ + +part + id = "m16"; + desc = "ATMEGA16"; + has_jtag = yes; + stk500_devcode = 0x82; + avr910_devcode = 0x74; + signature = 0x1e 0x94 0x03; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 100; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "calibration" + size = 4; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega164P +#------------------------------------------------------------ + +# close to ATmega16 + +part + id = "m164p"; + desc = "ATMEGA164P"; + has_jtag = yes; +# stk500_devcode = 0x82; # no STK500v1 support +# avr910_devcode = 0x?; # try the ATmega16 one:^ + avr910_devcode = 0x74; + signature = 0x1e 0x94 0x0a; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega324P +#------------------------------------------------------------ + +# similar to ATmega164P + +part + id = "m324p"; + desc = "ATMEGA324P"; + has_jtag = yes; +# stk500_devcode = 0x82; # no STK500v1 support +# avr910_devcode = 0x?; # try the ATmega16 one:^ + avr910_devcode = 0x74; + signature = 0x1e 0x95 0x08; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega644 +#------------------------------------------------------------ + +# similar to ATmega164 + +part + id = "m644"; + desc = "ATMEGA644"; + has_jtag = yes; +# stk500_devcode = 0x82; # no STK500v1 support +# avr910_devcode = 0x?; # try the ATmega16 one:^ + avr910_devcode = 0x74; + signature = 0x1e 0x96 0x09; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega644P +#------------------------------------------------------------ + +# similar to ATmega164p + +part + id = "m644p"; + desc = "ATMEGA644P"; + has_jtag = yes; +# stk500_devcode = 0x82; # no STK500v1 support +# avr910_devcode = 0x?; # try the ATmega16 one:^ + avr910_devcode = 0x74; + signature = 0x1e 0x96 0x0a; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega162 +#------------------------------------------------------------ + +part + id = "m162"; + desc = "ATMEGA162"; + has_jtag = yes; + stk500_devcode = 0x83; + avr910_devcode = 0x63; + signature = 0x1e 0x94 0x04; + chip_erase_delay = 9000; + pagel = 0xd7; + bs2 = 0xa0; + + idr = 0x04; + spmcr = 0x57; + allowfullpagebitstream = yes; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + + ; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; +; + + + +#------------------------------------------------------------ +# ATmega163 +#------------------------------------------------------------ + +part + id = "m163"; + desc = "ATMEGA163"; + stk500_devcode = 0x81; + avr910_devcode = 0x64; + signature = 0x1e 0x94 0x02; + chip_erase_delay = 32000; + pagel = 0xd7; + bs2 = 0xa0; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 30; + programfusepulsewidth = 0; + programfusepolltimeout = 2; + programlockpulsewidth = 0; + programlockpolltimeout = 2; + + + memory "eeprom" + size = 512; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 16000; + max_write_delay = 16000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o x x o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i 1 1 i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x 1 o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x 0 x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega169 +#------------------------------------------------------------ + +part + id = "m169"; + desc = "ATMEGA169"; + has_jtag = yes; + stk500_devcode = 0x85; + avr910_devcode = 0x78; + signature = 0x1e 0x94 0x05; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega329 +#------------------------------------------------------------ + +part + id = "m329"; + desc = "ATMEGA329"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x03; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3290 +#------------------------------------------------------------ + +# identical to ATmega329 + +part + id = "m3290"; + desc = "ATMEGA3290"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x04; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a3 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega649 +#------------------------------------------------------------ + +part + id = "m649"; + desc = "ATMEGA649"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x96 0x03; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega6490 +#------------------------------------------------------------ + +# identical to ATmega649 + +part + id = "m6490"; + desc = "ATMEGA6490"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x96 0x04; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega32 +#------------------------------------------------------------ + +part + id = "m32"; + desc = "ATMEGA32"; + has_jtag = yes; + stk500_devcode = 0x91; + avr910_devcode = 0x72; + signature = 0x1e 0x95 0x02; + chip_erase_delay = 9000; + pagel = 0xd7; + bs2 = 0xa0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega161 +#------------------------------------------------------------ + +part + id = "m161"; + desc = "ATMEGA161"; + stk500_devcode = 0x80; + avr910_devcode = 0x60; + signature = 0x1e 0x94 0x01; + chip_erase_delay = 28000; + pagel = 0xd7; + bs2 = 0xa0; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 30; + programfusepulsewidth = 0; + programfusepolltimeout = 2; + programlockpulsewidth = 0; + programlockpolltimeout = 2; + + memory "eeprom" + size = 512; + min_write_delay = 3400; + max_write_delay = 3400; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 14000; + max_write_delay = 14000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 16; + blocksize = 128; + readsize = 256; + ; + + memory "fuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x o x o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x 1 i 1 i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega8 +#------------------------------------------------------------ + +part + id = "m8"; + desc = "ATMEGA8"; + stk500_devcode = 0x70; + avr910_devcode = 0x76; + signature = 0x1e 0x93 0x07; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 10000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega8515 +#------------------------------------------------------------ + +part + id = "m8515"; + desc = "ATMEGA8515"; + stk500_devcode = 0x63; + avr910_devcode = 0x3A; + signature = 0x1e 0x93 0x06; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + + +#------------------------------------------------------------ +# ATmega8535 +#------------------------------------------------------------ + +part + id = "m8535"; + desc = "ATMEGA8535"; + stk500_devcode = 0x64; + avr910_devcode = 0x69; + signature = 0x1e 0x93 0x08; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATtiny26 +#------------------------------------------------------------ + +part + id = "t26"; + desc = "ATTINY26"; + stk500_devcode = 0x21; + avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x09; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 16; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x x x x i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny261 +#------------------------------------------------------------ +# Close to ATtiny26 + +part + id = "t261"; + desc = "ATTINY261"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x0c; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 128; + page_size = 4; + num_pages = 32; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny461 +#------------------------------------------------------------ +# Close to ATtiny261 + +part + id = "t461"; + desc = "ATTINY461"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x92 0x08; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 256; + page_size = 4; + num_pages = 64; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny861 +#------------------------------------------------------------ +# Close to ATtiny461 + +part + id = "t861"; + desc = "ATTINY861"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x93 0x0d; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 512; + num_pages = 128; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATmega48 +#------------------------------------------------------------ + +part + id = "m48"; + desc = "ATMEGA48"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x59; +# avr910_devcode = 0x; + signature = 0x1e 0x92 0x05; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 45000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 256; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x x", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega88 +#------------------------------------------------------------ + +part + id = "m88"; + desc = "ATMEGA88"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x73; +# avr910_devcode = 0x; + signature = 0x1e 0x93 0x0a; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 512; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega168 +#------------------------------------------------------------ + +part + id = "m168"; + desc = "ATMEGA168"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x94 0x06; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 512; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# ATmega328 +#------------------------------------------------------------ + +part + id = "m328p"; + desc = "ATMEGA328P"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x95 0x0F; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 1024; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# ATtiny2313 +#------------------------------------------------------------ + +part + id = "t2313"; + desc = "ATtiny2313"; + has_debugwire = yes; + flash_instr = 0xB2, 0x0F, 0x1F; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x23; +## Use the ATtiny26 devcode: + avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x0a; + pagel = 0xD4; + bs2 = 0xD6; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, + 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, + 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, + 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny2313 has Signature Bytes: 0x1E 0x91 0x0A. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +# The Tiny2313 has calibration data for both 4 MHz and 8 MHz. +# The information in the data sheet of April/2004 is wrong, this works: + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM2 +#------------------------------------------------------------ + +part + id = "pwm2"; + desc = "AT90PWM2"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x81; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; +# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM3 +#------------------------------------------------------------ + +# Completely identical to AT90PWM2 (including the signature!) + +part + id = "pwm3"; + desc = "AT90PWM3"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x81; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; +# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM2B +#------------------------------------------------------------ +# Same as AT90PWM2 but different signature. + +part + id = "pwm2b"; + desc = "AT90PWM2B"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x83; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM3B +#------------------------------------------------------------ + +# Completely identical to AT90PWM2B (including the signature!) + +part + id = "pwm3b"; + desc = "AT90PWM3B"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x83; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny25 +#------------------------------------------------------------ + +part + id = "t25"; + desc = "ATtiny25"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x08; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny25 has Signature Bytes: 0x1E 0x91 0x08. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny45 +#------------------------------------------------------------ + +part + id = "t45"; + desc = "ATtiny45"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x92 0x06; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 256; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny45 has Signature Bytes: 0x1E 0x92 0x08. (Data sheet 2586C-AVR-06/05 (doc2586.pdf) indicates otherwise!) + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny85 +#------------------------------------------------------------ + +part + id = "t85"; + desc = "ATtiny85"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x93 0x0b; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a8 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny85 has Signature Bytes: 0x1E 0x93 0x08. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega640 +#------------------------------------------------------------ +# Almost same as ATmega1280, except for different memory sizes + +part + id = "m640"; + desc = "ATMEGA640"; + signature = 0x1e 0x96 0x08; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega1280 +#------------------------------------------------------------ + +part + id = "m1280"; + desc = "ATMEGA1280"; + signature = 0x1e 0x97 0x03; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega1281 +#------------------------------------------------------------ +# Identical to ATmega1280 + +part + id = "m1281"; + desc = "ATMEGA1281"; + signature = 0x1e 0x97 0x04; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega2560 +#------------------------------------------------------------ + +part + id = "m2560"; + desc = "ATMEGA2560"; + signature = 0x1e 0x98 0x01; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 262144; + page_size = 256; + num_pages = 1024; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + load_ext_addr = " 0 1 0 0 1 1 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 a16", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega2561 +#------------------------------------------------------------ + +part + id = "m2561"; + desc = "ATMEGA2561"; + signature = 0x1e 0x98 0x02; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 262144; + page_size = 256; + num_pages = 1024; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + load_ext_addr = " 0 1 0 0 1 1 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 a16", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny24 +#------------------------------------------------------------ + +part + id = "t24"; + desc = "ATtiny24"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x0b; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny24 has Signature Bytes: 0x1E 0x91 0x0B. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny44 +#------------------------------------------------------------ + +part + id = "t44"; + desc = "ATtiny44"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x92 0x07; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 256; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny44 has Signature Bytes: 0x1E 0x92 0x07. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny84 +#------------------------------------------------------------ + +part + id = "t84"; + desc = "ATtiny84"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x93 0x0c; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a8 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny84 has Signature Bytes: 0x1E 0x93 0x0C. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB646 +#------------------------------------------------------------ + +part + id = "usb646"; + desc = "AT90USB646"; +# signature = 0x1e 0x96 0x82; ? + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB647 +#------------------------------------------------------------ +# identical to AT90USB646 + +part + id = "usb647"; + desc = "AT90USB647"; +# signature = 0x1e 0x96 0x82; ? + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB1286 +#------------------------------------------------------------ + +part + id = "usb1286"; + desc = "AT90USB1286"; + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB1287 +#------------------------------------------------------------ +# identical to AT90USB1286 + +part + id = "usb1287"; + desc = "AT90USB1287"; + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega325 +#------------------------------------------------------------ + +part + id = "m325"; + desc = "ATMEGA325"; + signature = 0x1e 0x95 0x05; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega645 +#------------------------------------------------------------ + +part + id = "m645"; + desc = "ATMEGA645"; + signature = 0x1E 0x96 0x05; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3250 +#------------------------------------------------------------ + +part + id = "m3250"; + desc = "ATMEGA3250"; + signature = 0x1E 0x95 0x06; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega6450 +#------------------------------------------------------------ + +part + id = "m6450"; + desc = "ATMEGA6450"; + signature = 0x1E 0x96 0x06; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; diff --git a/Marlin/Marlin/language.h b/Marlin/Marlin/language.h new file mode 100644 index 0000000000..111557521d --- /dev/null +++ b/Marlin/Marlin/language.h @@ -0,0 +1,498 @@ +#ifndef LANGUAGE_H +#define LANGUAGE_H + +// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES +// +// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" +// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS + +// Languages +// 1 English +// 2 - +// 3 French (Waiting translation) +// 4 German +// 5 Spanish +// 6 Etc + +#define LANGUAGE_CHOICE 1 // Pick your language from the list above + +#define PROTOCOL_VERSION "1.0" + +#if MOTHERBOARD == 7 || MOTHERBOARD == 71 + #define MACHINE_NAME "Ultimaker" + #define FIRMWARE_URL "http://firmware.ultimaker.com" +#else + #define MACHINE_NAME "Mendel" + #define FIRMWARE_URL "http://www.mendel-parts.com" +#endif + +#define STRINGIFY_(n) #n +#define STRINGIFY(n) STRINGIFY_(n) + +#if LANGUAGE_CHOICE == 1 + +// LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Ready." + #define MSG_SD_INSERTED "Card inserted" + #define MSG_SD_REMOVED "Card removed" + #define MSG_MAIN " Main \003" + #define MSG_AUTOSTART " Autostart" + #define MSG_DISABLE_STEPPERS " Disable Steppers" + #define MSG_AUTO_HOME " Auto Home" + #define MSG_SET_ORIGIN " Set Origin" + #define MSG_PREHEAT_PLA " Preheat PLA" + #define MSG_PREHEAT_PLA_SETTINGS " Preheat PLA Setting" + #define MSG_PREHEAT_ABS " Preheat ABS" + #define MSG_PREHEAT_ABS_SETTINGS " Preheat ABS Setting" + #define MSG_COOLDOWN " Cooldown" + #define MSG_EXTRUDE " Extrude" + #define MSG_RETRACT " Retract" + #define MSG_PREHEAT_PLA " Preheat PLA" + #define MSG_PREHEAT_ABS " Preheat ABS" + #define MSG_MOVE_AXIS " Move Axis \x7E" + #define MSG_SPEED " Speed:" + #define MSG_NOZZLE " \002Nozzle:" + #define MSG_NOZZLE1 " \002Nozzle2:" + #define MSG_NOZZLE2 " \002Nozzle3:" + #define MSG_BED " \002Bed:" + #define MSG_FAN_SPEED " Fan speed:" + #define MSG_FLOW " Flow:" + #define MSG_CONTROL " Control \003" + #define MSG_MIN " \002 Min:" + #define MSG_MAX " \002 Max:" + #define MSG_FACTOR " \002 Fact:" + #define MSG_AUTOTEMP " Autotemp:" + #define MSG_ON "On " + #define MSG_OFF "Off" + #define MSG_PID_P " PID-P: " + #define MSG_PID_I " PID-I: " + #define MSG_PID_D " PID-D: " + #define MSG_PID_C " PID-C: " + #define MSG_ACC " Acc:" + #define MSG_VXY_JERK " Vxy-jerk: " + #define MSG_VMAX " Vmax " + #define MSG_X "x:" + #define MSG_Y "y:" + #define MSG_Z "z:" + #define MSG_E "e:" + #define MSG_VMIN " Vmin:" + #define MSG_VTRAV_MIN " VTrav min:" + #define MSG_AMAX " Amax " + #define MSG_A_RETRACT " A-retract:" + #define MSG_XSTEPS " Xsteps/mm:" + #define MSG_YSTEPS " Ysteps/mm:" + #define MSG_ZSTEPS " Zsteps/mm:" + #define MSG_ESTEPS " Esteps/mm:" + #define MSG_MAIN_WIDE " Main \003" + #define MSG_RECTRACT_WIDE " Rectract \x7E" + #define MSG_TEMPERATURE_WIDE " Temperature \x7E" + #define MSG_TEMPERATURE_RTN " Temperature \003" + #define MSG_MOTION_WIDE " Motion \x7E" + #define MSG_STORE_EPROM " Store memory" + #define MSG_LOAD_EPROM " Load memory" + #define MSG_RESTORE_FAILSAFE " Restore Failsafe" + #define MSG_REFRESH "\004Refresh" + #define MSG_WATCH " Watch \003" + #define MSG_PREPARE " Prepare \x7E" + #define MSG_PREPARE_ALT " Prepare \003" + #define MSG_CONTROL_ARROW " Control \x7E" + #define MSG_RETRACT_ARROW " Retract \x7E" + #define MSG_TUNE " Tune \x7E" + #define MSG_PAUSE_PRINT " Pause Print \x7E" + #define MSG_RESUME_PRINT " Resume Print \x7E" + #define MSG_STOP_PRINT " Stop Print \x7E" + #define MSG_CARD_MENU " Card Menu \x7E" + #define MSG_NO_CARD " No Card" + #define MSG_DWELL "Sleep..." + #define MSG_USERWAIT "Wait for user..." + #define MSG_NO_MOVE "No move." + #define MSG_PART_RELEASE "Partial Release" + #define MSG_KILLED "KILLED. " + #define MSG_STOPPED "STOPPED. " + #define MSG_STEPPER_RELEASED "Released." + #define MSG_CONTROL_RETRACT " Retract mm:" + #define MSG_CONTROL_RETRACTF " Retract F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" + #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" + #define MSG_AUTORETRACT " AutoRetr.:" + #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure." + +// Serial Console Messages + + #define MSG_Enqueing "enqueing \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " External Reset" + #define MSG_BROWNOUT_RESET " Brown out Reset" + #define MSG_WATCHDOG_RESET " Watchdog Reset" + #define MSG_SOFTWARE_RESET " Software Reset" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Last Updated: " + #define MSG_FREE_MEMORY " Free Memory: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Done saving file." + #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" + #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" + #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" + #define MSG_FILE_PRINTED "Done printing file" + #define MSG_BEGIN_FILE_LIST "Begin file list" + #define MSG_END_FILE_LIST "End file list" + #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " + #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " + #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" + #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " + #define MSG_HEATING "Heating..." + #define MSG_HEATING_COMPLETE "Heating done." + #define MSG_BED_HEATING "Bed Heating." + #define MSG_BED_DONE "Bed done." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Count X:" + #define MSG_ERR_KILLED "Printer halted. kill() called !!" + #define MSG_ERR_STOPPED "Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)" + #define MSG_RESEND "Resend:" + #define MSG_UNKNOWN_COMMAND "Unknown command:\"" + #define MSG_ACTIVE_EXTRUDER "Active Extruder: " + #define MSG_INVALID_EXTRUDER "Invalid extruder" + #define MSG_X_MIN "x_min:" + #define MSG_X_MAX "x_max:" + #define MSG_Y_MIN "y_min:" + #define MSG_Y_MAX "y_max:" + #define MSG_Z_MIN "z_min:" + #define MSG_Z_MAX "z_max:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" + #define MSG_SD_INIT_FAIL "SD init fail" + #define MSG_SD_VOL_INIT_FAIL "volume.init failed" + #define MSG_SD_OPENROOT_FAIL "openRoot failed" + #define MSG_SD_CARD_OK "SD card ok" + #define MSG_SD_WORKDIR_FAIL "workDir open failed" + #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " + #define MSG_SD_FILE_OPENED "File opened:" + #define MSG_SD_SIZE " Size:" + #define MSG_SD_FILE_SELECTED "File selected" + #define MSG_SD_WRITE_TO_FILE "Writing to file: " + #define MSG_SD_PRINTING_BYTE "SD printing byte " + #define MSG_SD_NOT_PRINTING "Not SD printing" + #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" + #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" + + #define MSG_STEPPER_TO_HIGH "Steprate to high : " + #define MSG_ENDSTOPS_HIT "endstops hit: " + #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" + #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" + +#endif +#if LANGUAGE_CHOICE == 4 + +// LCD Menu Messages + + #define WELCOME_MSG MACHINE_NAME " Bereit." + + #define MSG_SD_INSERTED "SDKarte erkannt" + #define MSG_SD_REMOVED "SDKarte entfernt" + #define MSG_MAIN " Hauptmneü \003" + #define MSG_AUTOSTART " Autostart" + #define MSG_DISABLE_STEPPERS " Stepper abschalten" + #define MSG_AUTO_HOME " Auto Nullpunkt" + #define MSG_SET_ORIGIN " Setze Nullpunkt" + #define MSG_PREHEAT_PLA " Vorwärmen PLA" + #define MSG_PREHEAT_PLA_SETTINGS " Vorwärmen PLA Einstellungen" + #define MSG_PREHEAT_ABS " Vorwärmen ABS" + #define MSG_PREHEAT_ABS_SETTINGS " Vorwärmen ABS Einstellungen" + #define MSG_COOLDOWN " Abkühlen" + #define MSG_EXTRUDE " Extrude" + #define MSG_RETRACT " Retract" + #define MSG_MOVE_AXIS " Achsen bewegen\x7E" + #define MSG_SPEED " Geschw:" + #define MSG_NOZZLE " \002Düse:" + #define MSG_NOZZLE1 " \002Düse2:" + #define MSG_NOZZLE2 " \002Düse3:" + #define MSG_BED " \002Bett:" + #define MSG_FAN_SPEED " Lüftergeschw.:" + #define MSG_FLOW " Fluß:" + #define MSG_CONTROL " Einstellungen \003" + #define MSG_MIN " \002 Min:" + #define MSG_MAX " \002 Max:" + #define MSG_FACTOR " \002 Faktor:" + #define MSG_AUTOTEMP " AutoTemp:" + #define MSG_ON "Ein " + #define MSG_OFF "Aus " + #define MSG_PID_P " PID-P: " + #define MSG_PID_I " PID-I: " + #define MSG_PID_D " PID-D: " + #define MSG_PID_C " PID-C: " + #define MSG_ACC " Acc:" + #define MSG_VXY_JERK " Vxy-jerk: " + #define MSG_VMAX " Vmax " + #define MSG_X "x:" + #define MSG_Y "y:" + #define MSG_Z "z:" + #define MSG_E "e:" + #define MSG_VMIN " Vmin:" + #define MSG_VTRAV_MIN " VTrav min:" + #define MSG_AMAX " Amax " + #define MSG_A_RETRACT " A-Retract:" + #define MSG_XSTEPS " Xsteps/mm:" + #define MSG_YSTEPS " Ysteps/mm:" + #define MSG_ZSTEPS " Zsteps/mm:" + #define MSG_ESTEPS " Esteps/mm:" + #define MSG_MAIN_WIDE " Hauptmenü \003" + #define MSG_RECTRACT_WIDE " Rectract \x7E" + #define MSG_WATCH " Beobachten \003" + #define MSG_TEMPERATURE_WIDE " Temperatur \x7E" + #define MSG_TEMPERATURE_RTN " Temperatur \003" + #define MSG_MOTION_WIDE " Bewegung \x7E" + #define MSG_STORE_EPROM " EPROM speichern" + #define MSG_LOAD_EPROM " EPROM laden" + #define MSG_RESTORE_FAILSAFE " Standardkonfig." + #define MSG_REFRESH "\004Aktualisieren" + #define MSG_PREPARE " Vorbereitung \x7E" + #define MSG_PREPARE_ALT " Vorbereitung \003" + #define MSG_CONTROL_ARROW " Einstellungen \x7E" + #define MSG_TUNE " Justierung \x7E" + #define MSG_PAUSE_PRINT " Druck anhalten\x7E" + #define MSG_RESUME_PRINT " Druck fortsetz\x7E" + #define MSG_STOP_PRINT " Druck stoppen \x7E" + #define MSG_CARD_MENU " SDKarten Menü \x7E" + #define MSG_NO_CARD " Keine SDKarte" + #define MSG_DWELL "Warten..." + #define MSG_USERWAIT "Warte auf Nutzer..." + #define MSG_NO_MOVE "Kein Zug." + #define MSG_PART_RELEASE "Stepper tlw frei" + #define MSG_KILLED "KILLED" + #define MSG_STOPPED "GESTOPPT" + #define MSG_STEPPER_RELEASED "Stepper frei" + #define MSG_CONTROL_RETRACT " Retract mm:" + #define MSG_CONTROL_RETRACTF " Retract F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" + #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" + #define MSG_AUTORETRACT " AutoRetr.:" + #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in Menüstruktur." + +// Serial Console Messages + + #define MSG_Enqueing "enqueing \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " External Reset" + #define MSG_BROWNOUT_RESET " Brown out Reset" + #define MSG_WATCHDOG_RESET " Watchdog Reset" + #define MSG_SOFTWARE_RESET " Software Reset" + #define MSG_MARLIN "Marlin: " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Last Updated: " + #define MSG_FREE_MEMORY " Free Memory: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Done saving file." + #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" + #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" + #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" + #define MSG_FILE_PRINTED "Done printing file" + #define MSG_BEGIN_FILE_LIST "Begin file list" + #define MSG_END_FILE_LIST "End file list" + #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " + #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " + #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" + #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " + #define MSG_HEATING "Heating..." + #define MSG_HEATING_COMPLETE "Heating done." + #define MSG_BED_HEATING "Bed Heating." + #define MSG_BED_DONE "Bed done." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Count X:" + #define MSG_ERR_KILLED "Printer halted. kill() called !!" + #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!" + #define MSG_RESEND "Resend:" + #define MSG_UNKNOWN_COMMAND "Unknown command:\"" + #define MSG_ACTIVE_EXTRUDER "Active Extruder: " + #define MSG_INVALID_EXTRUDER "Invalid extruder" + #define MSG_X_MIN "x_min:" + #define MSG_X_MAX "x_max:" + #define MSG_Y_MIN "y_min:" + #define MSG_Y_MAX "y_max:" + #define MSG_Z_MIN "z_min:" + #define MSG_Z_MAX "z_max:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" + #define MSG_SD_INIT_FAIL "SD init fail" + #define MSG_SD_VOL_INIT_FAIL "volume.init failed" + #define MSG_SD_OPENROOT_FAIL "openRoot failed" + #define MSG_SD_CARD_OK "SD card ok" + #define MSG_SD_WORKDIR_FAIL "workDir open failed" + #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " + #define MSG_SD_FILE_OPENED "File opened:" + #define MSG_SD_SIZE " Size:" + #define MSG_SD_FILE_SELECTED "File selected" + #define MSG_SD_WRITE_TO_FILE "Writing to file: " + #define MSG_SD_PRINTING_BYTE "SD printing byte " + #define MSG_SD_NOT_PRINTING "Not SD printing" + #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" + #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" + + #define MSG_STEPPER_TO_HIGH "Steprate to high : " + #define MSG_ENDSTOPS_HIT "endstops hit: " + #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" + #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" + +#endif + +#if LANGUAGE_CHOICE == 5 + +// LCD Menu Messages +#define WELCOME_MSG MACHINE_NAME " Lista." +#define MSG_SD_INSERTED "Tarjeta SD Colocada" +#define MSG_SD_REMOVED "Tarjeta SD Retirada" +#define MSG_MAIN " Menu Principal \003" +#define MSG_AUTOSTART " Autostart" +#define MSG_DISABLE_STEPPERS " Apagar Motores" +#define MSG_AUTO_HOME " Llevar Ejes al Cero" +#define MSG_SET_ORIGIN " Establecer Cero" +#define MSG_COOLDOWN " Enfriar" +#define MSG_EXTRUDE " Extruir" +#define MSG_RETRACT " Retract" +#define MSG_PREHEAT_PLA " Precalentar PLA" +#define MSG_PREHEAT_PLA_SETTINGS " Precalentar PLA Setting" +#define MSG_PREHEAT_ABS " Precalentar ABS" +#define MSG_PREHEAT_ABS_SETTINGS " Precalentar ABS Setting" +#define MSG_MOVE_AXIS " Mover Ejes \x7E" +#define MSG_SPEED " Velocidad:" +#define MSG_NOZZLE " \002Nozzle:" +#define MSG_NOZZLE1 " \002Nozzle2:" +#define MSG_NOZZLE2 " \002Nozzle3:" +#define MSG_BED " \002Base:" +#define MSG_FAN_SPEED " Ventilador:" +#define MSG_FLOW " Flujo:" +#define MSG_CONTROL " Control \003" +#define MSG_MIN " \002 Min:" +#define MSG_MAX " \002 Max:" +#define MSG_FACTOR " \002 Fact:" +#define MSG_AUTOTEMP " Autotemp:" +#define MSG_ON "On " +#define MSG_OFF "Off" +#define MSG_PID_P " PID-P: " +#define MSG_PID_I " PID-I: " +#define MSG_PID_D " PID-D: " +#define MSG_PID_C " PID-C: " +#define MSG_ACC " Acc:" +#define MSG_VXY_JERK " Vxy-jerk: " +#define MSG_VMAX " Vmax " +#define MSG_X "x:" +#define MSG_Y "y:" +#define MSG_Z "z:" +#define MSG_E "e:" +#define MSG_VMIN " Vmin:" +#define MSG_VTRAV_MIN " VTrav min:" +#define MSG_AMAX " Amax " +#define MSG_A_RETRACT " A-retrac.:" +#define MSG_XSTEPS " Xpasos/mm:" +#define MSG_YSTEPS " Ypasos/mm:" +#define MSG_ZSTEPS " Zpasos/mm:" +#define MSG_ESTEPS " Epasos/mm:" +#define MSG_MAIN_WIDE " Menu Principal \003" +#define MSG_RECTRACT_WIDE " Retraer \x7E" +#define MSG_TEMPERATURE_WIDE " Temperatura \x7E" +#define MSG_TEMPERATURE_RTN " Temperatura \003" +#define MSG_MOTION_WIDE " Movimiento \x7E" +#define MSG_STORE_EPROM " Guardar Memoria" +#define MSG_LOAD_EPROM " Cargar Memoria" +#define MSG_RESTORE_FAILSAFE " Rest. de emergencia" +#define MSG_REFRESH "\004Volver a cargar" +#define MSG_WATCH " Monitorizar \003" +#define MSG_PREPARE " Preparar \x7E" +#define MSG_PREPARE_ALT " Preparar \003" +#define MSG_CONTROL_ARROW " Control \x7E" +#define MSG_RETRACT_ARROW " Control \x7E" +#define MSG_TUNE " Ajustar \x7E" +#define MSG_PAUSE_PRINT " Pause Print \x7E" +#define MSG_RESUME_PRINT " Resume Print \x7E" +#define MSG_STOP_PRINT " Detener Impresion \x7E" +#define MSG_CARD_MENU " Menu de SD \x7E" +#define MSG_NO_CARD " No hay Tarjeta SD" +#define MSG_DWELL "Reposo..." +#define MSG_USERWAIT "Esperando Ordenes..." +#define MSG_NO_MOVE "Sin movimiento" +#define MSG_PART_RELEASE "Desacople Parcial" +#define MSG_KILLED "PARADA DE EMERGENCIA. " +#define MSG_STOPPED "PARADA. " +#define MSG_STEPPER_RELEASED "Desacoplada." +#define MSG_CONTROL_RETRACT " Retraer mm:" +#define MSG_CONTROL_RETRACTF " Retraer F:" +#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" +#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" +#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" +#define MSG_AUTORETRACT " AutoRetr.:" +#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu" + +// Serial Console Messages + +#define MSG_Enqueing "En cola \"" +#define MSG_POWERUP "PowerUp" +#define MSG_EXTERNAL_RESET " Reset Externo" +#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" +#define MSG_WATCHDOG_RESET " Reset por Bloqueo" +#define MSG_SOFTWARE_RESET " Reset por Software" +#define MSG_MARLIN "Marlin " +#define MSG_AUTHOR " | Autor: " +#define MSG_CONFIGURATION_VER " Ultima actualizacion: " +#define MSG_FREE_MEMORY " Memoria libre: " +#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " +#define MSG_OK "ok" +#define MSG_FILE_SAVED "Guardado." +#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" +#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" +#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" +#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" +#define MSG_FILE_PRINTED "Impresion terminada" +#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" +#define MSG_END_FILE_LIST "Fin de la lista de archivos" +#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " +#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " +#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" +#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " +#define MSG_HEATING "Calentando..." +#define MSG_HEATING_COMPLETE "Calentamiento Hecho." +#define MSG_BED_HEATING "Calentando la base." +#define MSG_BED_DONE "Base Caliente." +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" +#define MSG_COUNT_X " Cuenta X:" +#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" +#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" +#define MSG_RESEND "Reenviar:" +#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" +#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " +#define MSG_INVALID_EXTRUDER "Extrusor Invalido" +#define MSG_X_MIN "x_min:" +#define MSG_X_MAX "x_max:" +#define MSG_Y_MIN "y_min:" +#define MSG_Y_MAX "y_max:" +#define MSG_Z_MIN "z_min:" +#define MSG_Z_MAX "z_max:" + +#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." +#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" +#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" +#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" +#define MSG_SD_CARD_OK "Tarjeta SD OK" +#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" +#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " +#define MSG_SD_FILE_OPENED "Archivo abierto:" +#define MSG_SD_SIZE " Tamaño:" +#define MSG_SD_FILE_SELECTED "Archivo Seleccionado" +#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " +#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " +#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" +#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" +#define MSG_SD_CANT_ENTER_SUBDIR "No se puede entrar en la carpeta:" + +#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : " +#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " +#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" +#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" + +#endif +#endif // ifndef LANGUAGE_H diff --git a/Marlin/Marlin/motion_control.cpp b/Marlin/Marlin/motion_control.cpp new file mode 100644 index 0000000000..76609054ff --- /dev/null +++ b/Marlin/Marlin/motion_control.cpp @@ -0,0 +1,137 @@ +/* + motion_control.c - high level interface for issuing motion commands + Part of Grbl + + Copyright (c) 2009-2011 Simen Svale Skogsrud + Copyright (c) 2011 Sungeun K. Jeon + + Grbl is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Grbl is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Grbl. If not, see . +*/ + +#include "Marlin.h" +#include "stepper.h" +#include "planner.h" + +// The arc is approximated by generating a huge number of tiny, linear segments. The length of each +// segment is configured in settings.mm_per_arc_segment. +void mc_arc(float *position, float *target, float *offset, uint8_t axis_0, uint8_t axis_1, + uint8_t axis_linear, float feed_rate, float radius, uint8_t isclockwise, uint8_t extruder) +{ + // int acceleration_manager_was_enabled = plan_is_acceleration_manager_enabled(); + // plan_set_acceleration_manager_enabled(false); // disable acceleration management for the duration of the arc + float center_axis0 = position[axis_0] + offset[axis_0]; + float center_axis1 = position[axis_1] + offset[axis_1]; + float linear_travel = target[axis_linear] - position[axis_linear]; + float extruder_travel = target[E_AXIS] - position[E_AXIS]; + float r_axis0 = -offset[axis_0]; // Radius vector from center to current location + float r_axis1 = -offset[axis_1]; + float rt_axis0 = target[axis_0] - center_axis0; + float rt_axis1 = target[axis_1] - center_axis1; + + // CCW angle between position and target from circle center. Only one atan2() trig computation required. + float angular_travel = atan2(r_axis0*rt_axis1-r_axis1*rt_axis0, r_axis0*rt_axis0+r_axis1*rt_axis1); + if (angular_travel < 0) { angular_travel += 2*M_PI; } + if (isclockwise) { angular_travel -= 2*M_PI; } + + float millimeters_of_travel = hypot(angular_travel*radius, fabs(linear_travel)); + if (millimeters_of_travel < 0.001) { return; } + uint16_t segments = floor(millimeters_of_travel/MM_PER_ARC_SEGMENT); + if(segments == 0) segments = 1; + + /* + // Multiply inverse feed_rate to compensate for the fact that this movement is approximated + // by a number of discrete segments. The inverse feed_rate should be correct for the sum of + // all segments. + if (invert_feed_rate) { feed_rate *= segments; } + */ + float theta_per_segment = angular_travel/segments; + float linear_per_segment = linear_travel/segments; + float extruder_per_segment = extruder_travel/segments; + + /* Vector rotation by transformation matrix: r is the original vector, r_T is the rotated vector, + and phi is the angle of rotation. Based on the solution approach by Jens Geisler. + r_T = [cos(phi) -sin(phi); + sin(phi) cos(phi] * r ; + + For arc generation, the center of the circle is the axis of rotation and the radius vector is + defined from the circle center to the initial position. Each line segment is formed by successive + vector rotations. This requires only two cos() and sin() computations to form the rotation + matrix for the duration of the entire arc. Error may accumulate from numerical round-off, since + all double numbers are single precision on the Arduino. (True double precision will not have + round off issues for CNC applications.) Single precision error can accumulate to be greater than + tool precision in some cases. Therefore, arc path correction is implemented. + + Small angle approximation may be used to reduce computation overhead further. This approximation + holds for everything, but very small circles and large mm_per_arc_segment values. In other words, + theta_per_segment would need to be greater than 0.1 rad and N_ARC_CORRECTION would need to be large + to cause an appreciable drift error. N_ARC_CORRECTION~=25 is more than small enough to correct for + numerical drift error. N_ARC_CORRECTION may be on the order a hundred(s) before error becomes an + issue for CNC machines with the single precision Arduino calculations. + + This approximation also allows mc_arc to immediately insert a line segment into the planner + without the initial overhead of computing cos() or sin(). By the time the arc needs to be applied + a correction, the planner should have caught up to the lag caused by the initial mc_arc overhead. + This is important when there are successive arc motions. + */ + // Vector rotation matrix values + float cos_T = 1-0.5*theta_per_segment*theta_per_segment; // Small angle approximation + float sin_T = theta_per_segment; + + float arc_target[4]; + float sin_Ti; + float cos_Ti; + float r_axisi; + uint16_t i; + int8_t count = 0; + + // Initialize the linear axis + arc_target[axis_linear] = position[axis_linear]; + + // Initialize the extruder axis + arc_target[E_AXIS] = position[E_AXIS]; + + for (i = 1; i. +*/ + +#ifndef motion_control_h +#define motion_control_h + +// Execute an arc in offset mode format. position == current xyz, target == target xyz, +// offset == offset from current xyz, axis_XXX defines circle plane in tool space, axis_linear is +// the direction of helical travel, radius == circle radius, isclockwise boolean. Used +// for vector transformation direction. +void mc_arc(float *position, float *target, float *offset, unsigned char axis_0, unsigned char axis_1, + unsigned char axis_linear, float feed_rate, float radius, unsigned char isclockwise, uint8_t extruder); + +#endif diff --git a/Marlin/Marlin/pins.h b/Marlin/Marlin/pins.h new file mode 100644 index 0000000000..403ff41169 --- /dev/null +++ b/Marlin/Marlin/pins.h @@ -0,0 +1,1162 @@ +#ifndef PINS_H +#define PINS_H + +#if MOTHERBOARD == 99 +#define KNOWN_BOARD 1 + +#define X_STEP_PIN 2 +#define X_DIR_PIN 3 +#define X_ENABLE_PIN -1 +#define X_MIN_PIN -1 +#define X_MAX_PIN 16 + +#define Y_STEP_PIN 5 +#define Y_DIR_PIN 6 +#define Y_ENABLE_PIN -1 +#define Y_MIN_PIN 67 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 62 +#define Z_DIR_PIN 63 +#define Z_ENABLE_PIN -1 +#define Z_MIN_PIN 59 +#define Z_MAX_PIN -1 + +#define E0_STEP_PIN 65 +#define E0_DIR_PIN 66 +#define E0_ENABLE_PIN -1 + +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN -1 +#define FAN_PIN -1 +#define PS_ON_PIN 9 +#define KILL_PIN -1 + +#define HEATER_0_PIN 13 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define HEATER_BED_PIN 4 +#define TEMP_BED_PIN 10 + +#endif /* 99 */ + +/**************************************************************************************** +* Gen7 v1.1, v1.2, v1.3, v1.4 pin assignment +* +****************************************************************************************/ + + +#if MOTHERBOARD == 13 +#define MOTHERBOARD 11 +#define GEN7_VERSION 14 // v1.4 +#endif + +#if MOTHERBOARD == 12 +#define MOTHERBOARD 11 +#define GEN7_VERSION 13 // v1.3 +#endif + +#if MOTHERBOARD == 11 +#define KNOWN_BOARD + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__) +#error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu. + +#endif + +#ifndef GEN7_VERSION +#define GEN7_VERSION 12 // v1.x +#endif + +//x axis pins +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 +#define X_MIN_PIN 7 +#define X_MAX_PIN -1 + +//y axis pins +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 +#define Y_MIN_PIN 5 +#define Y_MAX_PIN -1 + +//z axis pins +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 +#define Z_MIN_PIN 1 +#define Z_MAX_PIN 0 + +//extruder pins +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 + +#define TEMP_0_PIN 1 +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define TEMP_BED_PIN 2 + +#define HEATER_0_PIN 4 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define HEATER_BED_PIN 3 + +#define KILL_PIN -1 + +#define SDPOWER -1 +#define SDSS -1 // SCL pin of I2C header +#define LED_PIN -1 + +#if (GEN7_VERSION >= 13) +// Gen7 v1.3 removed the fan pin +#define FAN_PIN -1 +#else +#define FAN_PIN 31 +#endif +#define PS_ON_PIN 15 + +#if (GEN7_VERSION < 14) +// Gen 1.3 and earlier supplied thermistor power via PS_ON +// Need to ignore the bad thermistor readings on those units +#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE +#endif + +//our pin for debugging. +#define DEBUG_PIN 0 + +//our RS485 pins +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 + +#endif + +/******************************************************************************* +********* +* Gen7 Alfons3 pin assignment +* +******************************************************************************** +********/ +/* These Pins are assigned for the modified GEN7 Board from Alfons3 Please review the pins and adjust it for your needs*/ + +#if MOTHERBOARD == 10 +#define KNOWN_BOARD + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__) + #error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu. + +#endif + +//x axis pins + #define X_STEP_PIN 21 //different from stanard GEN7 + #define X_DIR_PIN 20 //different from stanard GEN7 + #define X_ENABLE_PIN 24 + #define X_MIN_PIN 0 + #define X_MAX_PIN -1 + + //y axis pins + #define Y_STEP_PIN 23 + #define Y_DIR_PIN 22 + #define Y_ENABLE_PIN 24 + #define Y_MIN_PIN 1 + #define Y_MAX_PIN -1 + + //z axis pins + #define Z_STEP_PIN 26 + #define Z_DIR_PIN 25 + #define Z_ENABLE_PIN 24 + #define Z_MIN_PIN 2 + #define Z_MAX_PIN -1 + + //extruder pins + #define E0_STEP_PIN 28 + #define E0_DIR_PIN 27 + #define E0_ENABLE_PIN 24 + + #define TEMP_0_PIN 2 + #define TEMP_1_PIN -1 + #define TEMP_2_PIN -1 + #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) + + #define HEATER_0_PIN 4 + #define HEATER_1_PIN -1 + #define HEATER_2_PIN -1 + #define HEATER_BED_PIN 3 // (bed) + + #define SDPOWER -1 + #define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support + #define LED_PIN -1 + + #define FAN_PIN -1 + #define PS_ON_PIN 19 + //our pin for debugging. + + #define DEBUG_PIN -1 + + //our RS485 pins + //#define TX_ENABLE_PIN 12 + //#define RX_ENABLE_PIN 13 + + #define BEEPER -1 + #define SDCARDDETECT -1 + #define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work + + #define KILL_PIN -1 + //Pins for 4bit LCD Support + #define LCD_PINS_RS 18 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 15 + #define LCD_PINS_D6 13 + #define LCD_PINS_D7 14 + + //buttons are directly attached + #define BTN_EN1 11 + #define BTN_EN2 10 + #define BTN_ENC 12 //the click + + #define BLEN_C 2 + #define BLEN_B 1 + #define BLEN_A 0 + + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 +#endif + +/**************************************************************************************** +* Arduino Mega pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 +#define KNOWN_BOARD 1 + +//////////////////FIX THIS////////////// +#ifndef __AVR_ATmega1280__ + #ifndef __AVR_ATmega2560__ + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. + #endif +#endif + +// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1 +// #define RAMPS_V_1_3 +// #define RAMPS_V_1_0 + +#if MOTHERBOARD == 33 || MOTHERBOARD == 34 + +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 //2 //Max endstops default to disabled "-1", set to commented value to enable. + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 //15 + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +#define Z2_STEP_PIN 36 +#define Z2_DIR_PIN 34 +#define Z2_ENABLE_PIN 30 + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 + +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 + +#if MOTHERBOARD == 33 +#define FAN_PIN 9 // (Sprinter config) +#else +#define FAN_PIN 4 // IO pin. Buffer needed +#endif +#define PS_ON_PIN 12 +#define KILL_PIN -1 + +#define HEATER_0_PIN 10 // EXTRUDER 1 +#if MOTHERBOARD == 33 +#define HEATER_1_PIN -1 +#else +#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter) +#endif +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 13 // ANALOG NUMBERING +#define TEMP_1_PIN 15 // ANALOG NUMBERING +#define TEMP_2_PIN -1 // ANALOG NUMBERING +#define HEATER_BED_PIN 8 // BED +#define TEMP_BED_PIN 14 // ANALOG NUMBERING + +#ifdef ULTRA_LCD + + #ifdef NEWPANEL + //arduino pin which triggers an piezzo beeper + #define BEEPER 33 // Beeper on AUX-4 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + + //buttons are directly attached using AUX-2 + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 //the click + + #define BLEN_C 2 + #define BLEN_B 1 + #define BLEN_A 0 + + #define SDCARDDETECT -1 // Ramps does not use this port + + //encoder rotation values + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 + + #else //old style panel with shift register + //arduino pin witch triggers an piezzo beeper + #define BEEPER 33 No Beeper added + + //buttons are attached to a shift register + // Not wired this yet + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + + //encoder rotation values + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 + + + //bits in the shift register that carry the buttons for: + // left up center down right red + #define BL_LE 7 + #define BL_UP 6 + #define BL_MI 5 + #define BL_DW 4 + #define BL_RI 3 + #define BL_ST 2 + + #define BLEN_B 1 + #define BLEN_A 0 + #endif +#endif //ULTRA_LCD + +#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default + +#define X_STEP_PIN 26 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 24 +#define X_MIN_PIN 3 +#define X_MAX_PIN -1 //2 + +#define Y_STEP_PIN 38 +#define Y_DIR_PIN 40 +#define Y_ENABLE_PIN 36 +#define Y_MIN_PIN 16 +#define Y_MAX_PIN -1 //17 + +#define Z_STEP_PIN 44 +#define Z_DIR_PIN 46 +#define Z_ENABLE_PIN 42 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN -1 //19 + +#define E0_STEP_PIN 32 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 + +#define SDPOWER 48 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#ifdef RAMPS_V_1_0 // RAMPS_V_1_0 + #define HEATER_0_PIN 12 // RAMPS 1.0 + #define HEATER_BED_PIN -1 // RAMPS 1.0 + #define FAN_PIN 11 // RAMPS 1.0 +#else // RAMPS_V_1_1 or RAMPS_V_1_2 + #define HEATER_0_PIN 10 // RAMPS 1.1 + #define HEATER_BED_PIN 8 // RAMPS 1.1 + #define FAN_PIN 9 // RAMPS 1.1 +#endif +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#endif + +// SPI for Max6675 Thermocouple + +#ifndef SDSUPPORT +// these pins are defined in the SD library if building with SD support + #define MAX_SCK_PIN 52 + #define MAX_MISO_PIN 50 + #define MAX_MOSI_PIN 51 + #define MAX6675_SS 53 +#else + #define MAX6675_SS 49 +#endif + +#endif + +/**************************************************************************************** +* Duemilanove w/ ATMega328P pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 4 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega328P__ +#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. +#endif + +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN -1 +#define X_MIN_PIN 17 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 10 +#define Y_DIR_PIN 7 +#define Y_ENABLE_PIN -1 +#define Y_MIN_PIN 8 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 13 +#define Z_DIR_PIN 3 +#define Z_ENABLE_PIN 2 +#define Z_MIN_PIN 4 +#define Z_MAX_PIN -1 + +#define E0_STEP_PIN 11 +#define E0_DIR_PIN 12 +#define E0_ENABLE_PIN -1 + +#define SDPOWER -1 +#define SDSS -1 +#define LED_PIN -1 +#define FAN_PIN 5 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 6 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define HEATER_BED_PIN -1 +#define TEMP_BED_PIN -1 + +#endif + +/**************************************************************************************** +* Gen6 pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 5 || MOTHERBOARD == 51 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega644P__ +#ifndef __AVR_ATmega1284P__ +#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif +#endif + +//x axis pins + #define X_STEP_PIN 15 + #define X_DIR_PIN 18 + #define X_ENABLE_PIN 19 + #define X_MIN_PIN 20 + #define X_MAX_PIN -1 + + //y axis pins + #define Y_STEP_PIN 23 + #define Y_DIR_PIN 22 + #define Y_ENABLE_PIN 24 + #define Y_MIN_PIN 25 + #define Y_MAX_PIN -1 + + //z axis pins + #define Z_STEP_PIN 27 + #define Z_DIR_PIN 28 + #define Z_ENABLE_PIN 29 + #define Z_MIN_PIN 30 + #define Z_MAX_PIN -1 + + //extruder pins + #define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715 + #define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715 + #define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715 + #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410 + #define TEMP_1_PIN -1 //changed @ rkoeppl 20110410 + + + #define TEMP_2_PIN -1 //changed @ rkoeppl 20110410 + #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 + #define HEATER_1_PIN -1 + #define HEATER_2_PIN -1 + #if MOTHERBOARD == 5 + #define HEATER_BED_PIN -1 //changed @ rkoeppl 20110410 + #define TEMP_BED_PIN -1 //changed @ rkoeppl 20110410 + #else + #define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410 + #define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410 + #endif + #define SDPOWER -1 + #define SDSS 17 + #define LED_PIN -1 //changed @ rkoeppl 20110410 + #define FAN_PIN -1 //changed @ rkoeppl 20110410 + #define PS_ON_PIN -1 //changed @ rkoeppl 20110410 + #define KILL_PIN -1 //changed @ drakelive 20120830 + //our pin for debugging. + + #define DEBUG_PIN 0 + + //our RS485 pins + #define TX_ENABLE_PIN 12 + #define RX_ENABLE_PIN 13 + + +#endif + +/**************************************************************************************** +* Sanguinololu pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 63 +#define MELZI +#endif +#if MOTHERBOARD == 62 || MOTHERBOARD == 63 +#undef MOTHERBOARD +#define MOTHERBOARD 6 +#define SANGUINOLOLU_V_1_2 +#endif +#if MOTHERBOARD == 6 +#define KNOWN_BOARD 1 +#ifndef __AVR_ATmega644P__ +#ifndef __AVR_ATmega1284P__ +#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif +#endif + +#define X_STEP_PIN 15 +#define X_DIR_PIN 21 +#if X_HOME_DIR < 0 +# define X_MIN_PIN 18 +# define X_MAX_PIN -1 +#else +# define X_MIN_PIN -1 +# define X_MAX_PIN 18 +#endif + +#define Y_STEP_PIN 22 +#define Y_DIR_PIN 23 +#if Y_HOME_DIR < 0 +# define Y_MIN_PIN 19 +# define Y_MAX_PIN -1 +#else +# define Y_MIN_PIN -1 +# define Y_MAX_PIN 19 +#endif + +#define Z_STEP_PIN 3 +#define Z_DIR_PIN 2 +#if Z_HOME_DIR < 0 +# define Z_MIN_PIN 20 +# define Z_MAX_PIN -1 +#else +# define Z_MIN_PIN -1 +# define Z_MAX_PIN 20 +#endif + +#define E0_STEP_PIN 1 +#define E0_DIR_PIN 0 + +#define LED_PIN -1 + +#define FAN_PIN -1 + +#ifdef MELZI +#define LED_PIN 28 +#define FAN_PIN 4 +#endif + +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 13 // (extruder) +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 + +#ifdef SANGUINOLOLU_V_1_2 + +#define HEATER_BED_PIN 12 // (bed) +#define X_ENABLE_PIN 14 +#define Y_ENABLE_PIN 14 +#define Z_ENABLE_PIN 26 +#define E0_ENABLE_PIN 14 + +#else + +#define HEATER_BED_PIN 14 // (bed) +#define X_ENABLE_PIN -1 +#define Y_ENABLE_PIN -1 +#define Z_ENABLE_PIN -1 +#define E0_ENABLE_PIN -1 + +#endif + +#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) +#define SDPOWER -1 +#define SDSS 31 + +#ifdef MELZI +#define SDSS 24 +#endif + +#endif + + +#if MOTHERBOARD == 7 +#define KNOWN_BOARD +/***************************************************************** +* Ultimaker pin assignment +******************************************************************/ + +#ifndef __AVR_ATmega1280__ + #ifndef __AVR_ATmega2560__ + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. + #endif +#endif + +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_MIN_PIN 22 +#define X_MAX_PIN 24 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_MIN_PIN 26 +#define Y_MAX_PIN 28 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 32 +#define Z_ENABLE_PIN 35 + +#define HEATER_BED_PIN 4 +#define TEMP_BED_PIN 10 + +#define HEATER_0_PIN 2 +#define TEMP_0_PIN 8 + +#define HEATER_1_PIN 3 +#define TEMP_1_PIN 9 + +#define HEATER_2_PIN -1 +#define TEMP_2_PIN -1 + +#define E0_STEP_PIN 43 +#define E0_DIR_PIN 45 +#define E0_ENABLE_PIN 41 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 + +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 +#define FAN_PIN 7 +#define PS_ON_PIN 12 +#define KILL_PIN -1 +#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing. + +#ifdef ULTRA_LCD + + #ifdef NEWPANEL + //arduino pin witch triggers an piezzo beeper + #define BEEPER 18 + + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + + //buttons are directly attached + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 19 //the click + + #define BLEN_C 2 + #define BLEN_B 1 + #define BLEN_A 0 + + #define SDCARDDETECT 38 + + //encoder rotation values + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 + #else //old style panel with shift register + //arduino pin witch triggers an piezzo beeper + #define BEEPER 18 + + //buttons are attached to a shift register + #define SHIFT_CLK 38 + #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_EN 17 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 + + //encoder rotation values + #ifndef ULTIMAKERCONTROLLER + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 + #else + #define encrot0 0 + #define encrot1 1 + #define encrot2 3 + #define encrot3 2 + + #endif + + #define SDCARDDETECT -1 + //bits in the shift register that carry the buttons for: + // left up center down right red + #define BL_LE 7 + #define BL_UP 6 + #define BL_MI 5 + #define BL_DW 4 + #define BL_RI 3 + #define BL_ST 2 + + #define BLEN_B 1 + #define BLEN_A 0 + #endif +#endif //ULTRA_LCD + +#endif + +#if MOTHERBOARD == 71 +#define KNOWN_BOARD +/***************************************************************** +* Ultimaker pin assignment (Old electronics) +******************************************************************/ + +#ifndef __AVR_ATmega1280__ + #ifndef __AVR_ATmega2560__ + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. + #endif +#endif + +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_MIN_PIN 15 +#define X_MAX_PIN 14 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_MIN_PIN 17 +#define Y_MAX_PIN 16 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_MIN_PIN 19 +#define Z_MAX_PIN 18 +#define Z_ENABLE_PIN 35 + +#define HEATER_BED_PIN -1 +#define TEMP_BED_PIN -1 + +#define HEATER_0_PIN 2 +#define TEMP_0_PIN 8 + +#define HEATER_1_PIN 1 +#define TEMP_1_PIN 1 + +#define HEATER_2_PIN -1 +#define TEMP_2_PIN -1 + +#define E0_STEP_PIN 43 +#define E0_DIR_PIN 45 +#define E0_ENABLE_PIN 41 + +#define E1_STEP_PIN -1 +#define E1_DIR_PIN -1 +#define E1_ENABLE_PIN -1 + +#define SDPOWER -1 +#define SDSS -1 +#define LED_PIN -1 +#define FAN_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. + +#define LCD_PINS_RS 24 +#define LCD_PINS_ENABLE 22 +#define LCD_PINS_D4 36 +#define LCD_PINS_D5 34 +#define LCD_PINS_D6 32 +#define LCD_PINS_D7 30 + +#endif + +/**************************************************************************************** +* Teensylu 0.7 pin assingments (ATMEGA90USB) +* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE! +****************************************************************************************/ +#if MOTHERBOARD == 8 +#define MOTHERBOARD 8 +#define KNOWN_BOARD 1 + + +#define X_STEP_PIN 0 +#define X_DIR_PIN 1 +#define X_ENABLE_PIN 39 +#define X_MIN_PIN 13 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 2 +#define Y_DIR_PIN 3 +#define Y_ENABLE_PIN 38 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 4 +#define Z_DIR_PIN 5 +#define Z_ENABLE_PIN 23 +#define Z_MIN_PIN 15 +#define Z_MAX_PIN -1 + +#define E0_STEP_PIN 6 +#define E0_DIR_PIN 7 +#define E0_ENABLE_PIN 19 + + + +#define HEATER_0_PIN 21 // Extruder +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define HEATER_BED_PIN 20 // Bed +#define FAN_PIN 22 // Fan + +#define TEMP_0_PIN 7 // Extruder +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define TEMP_BED_PIN 6 // Bed + +#define SDPOWER -1 +#define SDSS 8 +#define LED_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define ALARM_PIN -1 + +#ifndef SDSUPPORT +// these pins are defined in the SD library if building with SD support + #define SCK_PIN 9 + #define MISO_PIN 11 + #define MOSI_PIN 10 +#endif +#endif + +/**************************************************************************************** +* Gen3+ pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 9 +#define MOTHERBOARD 6 +#define KNOWN_BOARD 1 +#ifndef __AVR_ATmega644P__ +#ifndef __AVR_ATmega1284P__ +#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif +#endif + +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_MIN_PIN 20 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_MIN_PIN 25 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 27 +#define Z_DIR_PIN 28 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN -1 + +#define E_STEP_PIN 17 +#define E_DIR_PIN 21 + +#define LED_PIN -1 + +#define FAN_PIN -1 + +#define PS_ON_PIN 14 +#define KILL_PIN -1 + +#define HEATER_0_PIN 12 // (extruder) + +#define HEATER_1_PIN 16 // (bed) +#define X_ENABLE_PIN 19 +#define Y_ENABLE_PIN 24 +#define Z_ENABLE_PIN 29 +#define E_ENABLE_PIN 13 + +#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) +#define TEMP_1_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) +#define TEMP_2_PIN -1 +#define SDPOWER -1 +#define SDSS 4 +#define HEATER_2_PIN -1 + +#endif + + + +/**************************************************************************************** +* Open Motion controller with enable based extruders +* +* ATMega644 +* +* +---\/---+ +* (D 0) PB0 1| |40 PA0 (AI 0 / D31) +* (D 1) PB1 2| |39 PA1 (AI 1 / D30) +* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) +* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) +* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) +* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) +* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) +* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) +* RST 9| |32 AREF +* VCC 10| |31 GND +* GND 11| |30 AVCC +* XTAL2 12| |29 PC7 (D 23) +* XTAL1 13| |28 PC6 (D 22) +* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI +* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO +* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS +* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK +* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA +* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL +* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM +* +--------+ +* +****************************************************************************************/ +#if MOTHERBOARD == 90 //Alpha OMCA board +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega644__ +#error Oops! Make sure you have 'SanguinoA' selected from the 'Tools -> Boards' menu. +#endif + +#define X_STEP_PIN 21 +#define X_DIR_PIN 20 +#define X_ENABLE_PIN 24 +#define X_MIN_PIN 0 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 +#define Y_MIN_PIN 1 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 +#define Z_MIN_PIN 2 +#define Z_MAX_PIN -1 + +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 + +#define E1_STEP_PIN -1 // 19 +#define E1_DIR_PIN -1 // 18 +#define E1_ENABLE_PIN 24 + +#define E2_STEP_PIN -1 // 17 +#define E2_DIR_PIN -1 // 16 +#define E2_ENABLE_PIN 24 + +#define SDPOWER -1 +#define SDSS 11 +#define SDCARDDETECT -1 // 10 optional also used as mode pin +#define LED_PIN -1 +#define FAN_PIN 3 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 4 +#define HEATER_1_PIN -1 // 12 +#define HEATER_2_PIN -1 // 13 +#define TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN -1 // 1 +#define TEMP_2_PIN -1 // 2 +#define HEATER_BED_PIN -1 // 14/15 +#define TEMP_BED_PIN -1 // 1,2 or I2C +/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ + +#endif + +#if MOTHERBOARD == 91 // Final OMCA board -- REF http://sanguino.cc/hardware +#define KNOWN_BOARD 1 + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) +#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. (Final OMCA board) +#endif + +#define X_STEP_PIN 26 +#define X_DIR_PIN 25 +#define X_ENABLE_PIN 10 +#define X_MIN_PIN 0 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 28 +#define Y_DIR_PIN 27 +#define Y_ENABLE_PIN 10 +#define Y_MIN_PIN 1 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 23 +#define Z_DIR_PIN 22 +#define Z_ENABLE_PIN 10 +#define Z_MIN_PIN 2 +#define Z_MAX_PIN -1 + +#define E0_STEP_PIN 24 +#define E0_DIR_PIN 21 +#define E0_ENABLE_PIN 10 + +/* future proofing */ +#define __FS 20 +#define __FD 19 +#define __GS 18 +#define __GD 13 + +#define UNUSED_PWM 14 /* PWM on LEFT connector */ + +#define E1_STEP_PIN -1 // 21 +#define E1_DIR_PIN -1 // 20 +#define E1_ENABLE_PIN -1 // 19 + +#define E2_STEP_PIN -1 // 21 +#define E2_DIR_PIN -1 // 20 +#define E2_ENABLE_PIN -1 // 18 + +#define SDPOWER -1 +#define SDSS 11 +#define SDCARDDETECT -1 // 10 optional also used as mode pin +#define LED_PIN -1 +#define FAN_PIN 14 /* PWM on MIDDLE connector */ +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 3 /*DONE PWM on RIGHT connector */ +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 0 // ANALOG INPUT NUMBERING +#define TEMP_1_PIN 1 // ANALOG +#define TEMP_2_PIN -1 // 2 +#define HEATER_BED_PIN 4 +#define TEMP_BED_PIN 2 // 1,2 or I2C + +#define I2C_SCL 16 +#define I2C_SDA 17 + +#endif + + +#ifndef KNOWN_BOARD +#error Unknown MOTHERBOARD value in configuration.h +#endif + +//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! +#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, HEATER_0_PIN, +#if EXTRUDERS > 1 + #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, HEATER_1_PIN, +#else + #define _E1_PINS +#endif +#if EXTRUDERS > 2 + #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, HEATER_2_PIN, +#else + #define _E2_PINS +#endif + +#ifdef DISABLE_MAX_ENDSTOPS +#define X_MAX_PIN -1 +#define Y_MAX_PIN -1 +#define Z_MAX_PIN -1 +#endif + +#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, LED_PIN, PS_ON_PIN, \ + HEATER_BED_PIN, FAN_PIN, \ + _E0_PINS _E1_PINS _E2_PINS \ + TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN, TEMP_BED_PIN } +#endif diff --git a/Marlin/Marlin/planner.cpp b/Marlin/Marlin/planner.cpp new file mode 100644 index 0000000000..6c47e298d5 --- /dev/null +++ b/Marlin/Marlin/planner.cpp @@ -0,0 +1,866 @@ +/* + planner.c - buffers movement commands and manages the acceleration profile plan + Part of Grbl + + Copyright (c) 2009-2011 Simen Svale Skogsrud + + Grbl is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Grbl is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Grbl. If not, see . + */ + +/* The ring buffer implementation gleaned from the wiring_serial library by David A. Mellis. */ + +/* + Reasoning behind the mathematics in this module (in the key of 'Mathematica'): + + s == speed, a == acceleration, t == time, d == distance + + Basic definitions: + + Speed[s_, a_, t_] := s + (a*t) + Travel[s_, a_, t_] := Integrate[Speed[s, a, t], t] + + Distance to reach a specific speed with a constant acceleration: + + Solve[{Speed[s, a, t] == m, Travel[s, a, t] == d}, d, t] + d -> (m^2 - s^2)/(2 a) --> estimate_acceleration_distance() + + Speed after a given distance of travel with constant acceleration: + + Solve[{Speed[s, a, t] == m, Travel[s, a, t] == d}, m, t] + m -> Sqrt[2 a d + s^2] + + DestinationSpeed[s_, a_, d_] := Sqrt[2 a d + s^2] + + When to start braking (di) to reach a specified destionation speed (s2) after accelerating + from initial speed s1 without ever stopping at a plateau: + + Solve[{DestinationSpeed[s1, a, di] == DestinationSpeed[s2, a, d - di]}, di] + di -> (2 a d - s1^2 + s2^2)/(4 a) --> intersection_distance() + + IntersectionDistance[s1_, s2_, a_, d_] := (2 a d - s1^2 + s2^2)/(4 a) + */ + +#include "Marlin.h" +#include "planner.h" +#include "stepper.h" +#include "temperature.h" +#include "ultralcd.h" +#include "language.h" + +//=========================================================================== +//=============================public variables ============================ +//=========================================================================== + +unsigned long minsegmenttime; +float max_feedrate[4]; // set the max speeds +float axis_steps_per_unit[4]; +unsigned long max_acceleration_units_per_sq_second[4]; // Use M201 to override by software +float minimumfeedrate; +float acceleration; // Normal acceleration mm/s^2 THIS IS THE DEFAULT ACCELERATION for all moves. M204 SXXXX +float retract_acceleration; // mm/s^2 filament pull-pack and push-forward while standing still in the other axis M204 TXXXX +float max_xy_jerk; //speed than can be stopped at once, if i understand correctly. +float max_z_jerk; +float max_e_jerk; +float mintravelfeedrate; +unsigned long axis_steps_per_sqr_second[NUM_AXIS]; + +// The current position of the tool in absolute steps +long position[4]; //rescaled from extern when axis_steps_per_unit are changed by gcode +static float previous_speed[4]; // Speed of previous path line segment +static float previous_nominal_speed; // Nominal speed of previous path line segment + +extern volatile int extrudemultiply; // Sets extrude multiply factor (in percent) + +#ifdef AUTOTEMP +float autotemp_max=250; +float autotemp_min=210; +float autotemp_factor=0.1; +bool autotemp_enabled=false; +#endif + +//=========================================================================== +//=================semi-private variables, used in inline functions ===== +//=========================================================================== +block_t block_buffer[BLOCK_BUFFER_SIZE]; // A ring buffer for motion instfructions +volatile unsigned char block_buffer_head; // Index of the next block to be pushed +volatile unsigned char block_buffer_tail; // Index of the block to process now + +//=========================================================================== +//=============================private variables ============================ +//=========================================================================== +#ifdef PREVENT_DANGEROUS_EXTRUDE +bool allow_cold_extrude=false; +#endif +#ifdef XY_FREQUENCY_LIMIT +// Used for the frequency limit +static unsigned char old_direction_bits = 0; // Old direction bits. Used for speed calculations +static long x_segment_time[3]={ + 0,0,0}; // Segment times (in us). Used for speed calculations +static long y_segment_time[3]={ + 0,0,0}; +#endif + +// Returns the index of the next block in the ring buffer +// NOTE: Removed modulo (%) operator, which uses an expensive divide and multiplication. +static int8_t next_block_index(int8_t block_index) { + block_index++; + if (block_index == BLOCK_BUFFER_SIZE) { + block_index = 0; + } + return(block_index); +} + + +// Returns the index of the previous block in the ring buffer +static int8_t prev_block_index(int8_t block_index) { + if (block_index == 0) { + block_index = BLOCK_BUFFER_SIZE; + } + block_index--; + return(block_index); +} + +//=========================================================================== +//=============================functions ============================ +//=========================================================================== + +// Calculates the distance (not time) it takes to accelerate from initial_rate to target_rate using the +// given acceleration: +FORCE_INLINE float estimate_acceleration_distance(float initial_rate, float target_rate, float acceleration) +{ + if (acceleration!=0) { + return((target_rate*target_rate-initial_rate*initial_rate)/ + (2.0*acceleration)); + } + else { + return 0.0; // acceleration was 0, set acceleration distance to 0 + } +} + +// This function gives you the point at which you must start braking (at the rate of -acceleration) if +// you started at speed initial_rate and accelerated until this point and want to end at the final_rate after +// a total travel of distance. This can be used to compute the intersection point between acceleration and +// deceleration in the cases where the trapezoid has no plateau (i.e. never reaches maximum speed) + +FORCE_INLINE float intersection_distance(float initial_rate, float final_rate, float acceleration, float distance) +{ + if (acceleration!=0) { + return((2.0*acceleration*distance-initial_rate*initial_rate+final_rate*final_rate)/ + (4.0*acceleration) ); + } + else { + return 0.0; // acceleration was 0, set intersection distance to 0 + } +} + +// Calculates trapezoid parameters so that the entry- and exit-speed is compensated by the provided factors. + +void calculate_trapezoid_for_block(block_t *block, float entry_factor, float exit_factor) { + unsigned long initial_rate = ceil(block->nominal_rate*entry_factor); // (step/min) + unsigned long final_rate = ceil(block->nominal_rate*exit_factor); // (step/min) + + // Limit minimal step rate (Otherwise the timer will overflow.) + if(initial_rate <120) { + initial_rate=120; + } + if(final_rate < 120) { + final_rate=120; + } + + long acceleration = block->acceleration_st; + int32_t accelerate_steps = + ceil(estimate_acceleration_distance(block->initial_rate, block->nominal_rate, acceleration)); + int32_t decelerate_steps = + floor(estimate_acceleration_distance(block->nominal_rate, block->final_rate, -acceleration)); + + // Calculate the size of Plateau of Nominal Rate. + int32_t plateau_steps = block->step_event_count-accelerate_steps-decelerate_steps; + + // Is the Plateau of Nominal Rate smaller than nothing? That means no cruising, and we will + // have to use intersection_distance() to calculate when to abort acceleration and start braking + // in order to reach the final_rate exactly at the end of this block. + if (plateau_steps < 0) { + accelerate_steps = ceil( + intersection_distance(block->initial_rate, block->final_rate, acceleration, block->step_event_count)); + accelerate_steps = max(accelerate_steps,0); // Check limits due to numerical round-off + accelerate_steps = min(accelerate_steps,block->step_event_count); + plateau_steps = 0; + } + +#ifdef ADVANCE + volatile long initial_advance = block->advance*entry_factor*entry_factor; + volatile long final_advance = block->advance*exit_factor*exit_factor; +#endif // ADVANCE + + // block->accelerate_until = accelerate_steps; + // block->decelerate_after = accelerate_steps+plateau_steps; + CRITICAL_SECTION_START; // Fill variables used by the stepper in a critical section + if(block->busy == false) { // Don't update variables if block is busy. + block->accelerate_until = accelerate_steps; + block->decelerate_after = accelerate_steps+plateau_steps; + block->initial_rate = initial_rate; + block->final_rate = final_rate; +#ifdef ADVANCE + block->initial_advance = initial_advance; + block->final_advance = final_advance; +#endif //ADVANCE + } + CRITICAL_SECTION_END; +} + +// Calculates the maximum allowable speed at this point when you must be able to reach target_velocity using the +// acceleration within the allotted distance. +FORCE_INLINE float max_allowable_speed(float acceleration, float target_velocity, float distance) { + return sqrt(target_velocity*target_velocity-2*acceleration*distance); +} + +// "Junction jerk" in this context is the immediate change in speed at the junction of two blocks. +// This method will calculate the junction jerk as the euclidean distance between the nominal +// velocities of the respective blocks. +//inline float junction_jerk(block_t *before, block_t *after) { +// return sqrt( +// pow((before->speed_x-after->speed_x), 2)+pow((before->speed_y-after->speed_y), 2)); +//} + + +// The kernel called by planner_recalculate() when scanning the plan from last to first entry. +void planner_reverse_pass_kernel(block_t *previous, block_t *current, block_t *next) { + if(!current) { + return; + } + + if (next) { + // If entry speed is already at the maximum entry speed, no need to recheck. Block is cruising. + // If not, block in state of acceleration or deceleration. Reset entry speed to maximum and + // check for maximum allowable speed reductions to ensure maximum possible planned speed. + if (current->entry_speed != current->max_entry_speed) { + + // If nominal length true, max junction speed is guaranteed to be reached. Only compute + // for max allowable speed if block is decelerating and nominal length is false. + if ((!current->nominal_length_flag) && (current->max_entry_speed > next->entry_speed)) { + current->entry_speed = min( current->max_entry_speed, + max_allowable_speed(-current->acceleration,next->entry_speed,current->millimeters)); + } + else { + current->entry_speed = current->max_entry_speed; + } + current->recalculate_flag = true; + + } + } // Skip last block. Already initialized and set for recalculation. +} + +// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This +// implements the reverse pass. +void planner_reverse_pass() { + uint8_t block_index = block_buffer_head; + + //Make a local copy of block_buffer_tail, because the interrupt can alter it + CRITICAL_SECTION_START; + unsigned char tail = block_buffer_tail; + CRITICAL_SECTION_END + + if(((block_buffer_head-tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1)) > 3) { + block_index = (block_buffer_head - 3) & (BLOCK_BUFFER_SIZE - 1); + block_t *block[3] = { + NULL, NULL, NULL }; + while(block_index != tail) { + block_index = prev_block_index(block_index); + block[2]= block[1]; + block[1]= block[0]; + block[0] = &block_buffer[block_index]; + planner_reverse_pass_kernel(block[0], block[1], block[2]); + } + } +} + +// The kernel called by planner_recalculate() when scanning the plan from first to last entry. +void planner_forward_pass_kernel(block_t *previous, block_t *current, block_t *next) { + if(!previous) { + return; + } + + // If the previous block is an acceleration block, but it is not long enough to complete the + // full speed change within the block, we need to adjust the entry speed accordingly. Entry + // speeds have already been reset, maximized, and reverse planned by reverse planner. + // If nominal length is true, max junction speed is guaranteed to be reached. No need to recheck. + if (!previous->nominal_length_flag) { + if (previous->entry_speed < current->entry_speed) { + double entry_speed = min( current->entry_speed, + max_allowable_speed(-previous->acceleration,previous->entry_speed,previous->millimeters) ); + + // Check for junction speed change + if (current->entry_speed != entry_speed) { + current->entry_speed = entry_speed; + current->recalculate_flag = true; + } + } + } +} + +// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This +// implements the forward pass. +void planner_forward_pass() { + uint8_t block_index = block_buffer_tail; + block_t *block[3] = { + NULL, NULL, NULL }; + + while(block_index != block_buffer_head) { + block[0] = block[1]; + block[1] = block[2]; + block[2] = &block_buffer[block_index]; + planner_forward_pass_kernel(block[0],block[1],block[2]); + block_index = next_block_index(block_index); + } + planner_forward_pass_kernel(block[1], block[2], NULL); +} + +// Recalculates the trapezoid speed profiles for all blocks in the plan according to the +// entry_factor for each junction. Must be called by planner_recalculate() after +// updating the blocks. +void planner_recalculate_trapezoids() { + int8_t block_index = block_buffer_tail; + block_t *current; + block_t *next = NULL; + + while(block_index != block_buffer_head) { + current = next; + next = &block_buffer[block_index]; + if (current) { + // Recalculate if current block entry or exit junction speed has changed. + if (current->recalculate_flag || next->recalculate_flag) { + // NOTE: Entry and exit factors always > 0 by all previous logic operations. + calculate_trapezoid_for_block(current, current->entry_speed/current->nominal_speed, + next->entry_speed/current->nominal_speed); + current->recalculate_flag = false; // Reset current only to ensure next trapezoid is computed + } + } + block_index = next_block_index( block_index ); + } + // Last/newest block in buffer. Exit speed is set with MINIMUM_PLANNER_SPEED. Always recalculated. + if(next != NULL) { + calculate_trapezoid_for_block(next, next->entry_speed/next->nominal_speed, + MINIMUM_PLANNER_SPEED/next->nominal_speed); + next->recalculate_flag = false; + } +} + +// Recalculates the motion plan according to the following algorithm: +// +// 1. Go over every block in reverse order and calculate a junction speed reduction (i.e. block_t.entry_factor) +// so that: +// a. The junction jerk is within the set limit +// b. No speed reduction within one block requires faster deceleration than the one, true constant +// acceleration. +// 2. Go over every block in chronological order and dial down junction speed reduction values if +// a. The speed increase within one block would require faster accelleration than the one, true +// constant acceleration. +// +// When these stages are complete all blocks have an entry_factor that will allow all speed changes to +// be performed using only the one, true constant acceleration, and where no junction jerk is jerkier than +// the set limit. Finally it will: +// +// 3. Recalculate trapezoids for all blocks. + +void planner_recalculate() { + planner_reverse_pass(); + planner_forward_pass(); + planner_recalculate_trapezoids(); +} + +void plan_init() { + block_buffer_head = 0; + block_buffer_tail = 0; + memset(position, 0, sizeof(position)); // clear position + previous_speed[0] = 0.0; + previous_speed[1] = 0.0; + previous_speed[2] = 0.0; + previous_speed[3] = 0.0; + previous_nominal_speed = 0.0; +} + + + + +#ifdef AUTOTEMP +void getHighESpeed() +{ + static float oldt=0; + if(!autotemp_enabled){ + return; + } + if(degTargetHotend0()+2high) + { + high=se; + } + } + block_index = (block_index+1) & (BLOCK_BUFFER_SIZE - 1); + } + + float g=autotemp_min+high*autotemp_factor; + float t=g; + if(tautotemp_max) + t=autotemp_max; + if(oldt>t) + { + t=AUTOTEMP_OLDWEIGHT*oldt+(1-AUTOTEMP_OLDWEIGHT)*t; + } + oldt=t; + setTargetHotend0(t); +} +#endif + +void check_axes_activity() { + unsigned char x_active = 0; + unsigned char y_active = 0; + unsigned char z_active = 0; + unsigned char e_active = 0; + unsigned char fan_speed = 0; + unsigned char tail_fan_speed = 0; + block_t *block; + + if(block_buffer_tail != block_buffer_head) { + uint8_t block_index = block_buffer_tail; + tail_fan_speed = block_buffer[block_index].fan_speed; + while(block_index != block_buffer_head) { + block = &block_buffer[block_index]; + if(block->steps_x != 0) x_active++; + if(block->steps_y != 0) y_active++; + if(block->steps_z != 0) z_active++; + if(block->steps_e != 0) e_active++; + if(block->fan_speed != 0) fan_speed++; + block_index = (block_index+1) & (BLOCK_BUFFER_SIZE - 1); + } + } + else { +#if FAN_PIN > -1 + if (FanSpeed != 0){ + analogWrite(FAN_PIN,FanSpeed); // If buffer is empty use current fan speed + } +#endif + } + if((DISABLE_X) && (x_active == 0)) disable_x(); + if((DISABLE_Y) && (y_active == 0)) disable_y(); + if((DISABLE_Z) && (z_active == 0)) disable_z(); + if((DISABLE_E) && (e_active == 0)) { + disable_e0(); + disable_e1(); + disable_e2(); + } +#if FAN_PIN > -1 + if((FanSpeed == 0) && (fan_speed ==0)) { + analogWrite(FAN_PIN, 0); + } + + if (FanSpeed != 0 && tail_fan_speed !=0) { + analogWrite(FAN_PIN,tail_fan_speed); + } +#endif +#ifdef AUTOTEMP + getHighESpeed(); +#endif +} + + +float junction_deviation = 0.1; +// Add a new linear movement to the buffer. steps_x, _y and _z is the absolute position in +// mm. Microseconds specify how many microseconds the move should take to perform. To aid acceleration +// calculation the caller must also provide the physical length of the line in millimeters. +void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder) +{ + // Calculate the buffer head after we push this byte + int next_buffer_head = next_block_index(block_buffer_head); + + // If the buffer is full: good! That means we are well ahead of the robot. + // Rest here until there is room in the buffer. + while(block_buffer_tail == next_buffer_head) { + manage_heater(); + manage_inactivity(); + LCD_STATUS; + } + + // The target position of the tool in absolute steps + // Calculate target position in absolute steps + //this should be done after the wait, because otherwise a M92 code within the gcode disrupts this calculation somehow + long target[4]; + target[X_AXIS] = lround(x*axis_steps_per_unit[X_AXIS]); + target[Y_AXIS] = lround(y*axis_steps_per_unit[Y_AXIS]); + target[Z_AXIS] = lround(z*axis_steps_per_unit[Z_AXIS]); + target[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]); + +#ifdef PREVENT_DANGEROUS_EXTRUDE + if(target[E_AXIS]!=position[E_AXIS]) + if(degHotend(active_extruder)axis_steps_per_unit[E_AXIS]*EXTRUDE_MAXLENGTH) + { + position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part + SERIAL_ECHO_START; + SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); + } +#endif +#endif + + // Prepare to set up new block + block_t *block = &block_buffer[block_buffer_head]; + + // Mark block as not busy (Not executed by the stepper interrupt) + block->busy = false; + + // Number of steps for each axis + block->steps_x = labs(target[X_AXIS]-position[X_AXIS]); + block->steps_y = labs(target[Y_AXIS]-position[Y_AXIS]); + block->steps_z = labs(target[Z_AXIS]-position[Z_AXIS]); + block->steps_e = labs(target[E_AXIS]-position[E_AXIS]); + block->steps_e *= extrudemultiply; + block->steps_e /= 100; + block->step_event_count = max(block->steps_x, max(block->steps_y, max(block->steps_z, block->steps_e))); + + // Bail if this is a zero-length block + if (block->step_event_count <= dropsegments) { + return; + }; + + block->fan_speed = FanSpeed; + + // Compute direction bits for this block + block->direction_bits = 0; + if (target[X_AXIS] < position[X_AXIS]) { + block->direction_bits |= (1<direction_bits |= (1<direction_bits |= (1<direction_bits |= (1<active_extruder = extruder; + + //enable active axes + if(block->steps_x != 0) enable_x(); + if(block->steps_y != 0) enable_y(); +#ifndef Z_LATE_ENABLE + if(block->steps_z != 0) enable_z(); +#endif + + // Enable all + if(block->steps_e != 0) { + enable_e0(); + enable_e1(); + enable_e2(); + } + + if (block->steps_e == 0) { + if(feed_ratesteps_x <=dropsegments && block->steps_y <=dropsegments && block->steps_z <=dropsegments ) { + block->millimeters = fabs(delta_mm[E_AXIS]); + } + else { + block->millimeters = sqrt(square(delta_mm[X_AXIS]) + square(delta_mm[Y_AXIS]) + square(delta_mm[Z_AXIS])); + } + float inverse_millimeters = 1.0/block->millimeters; // Inverse millimeters to remove multiple divides + + // Calculate speed in mm/second for each axis. No divide by zero due to previous checks. + float inverse_second = feed_rate * inverse_millimeters; + + int moves_queued=(block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1); + + // slow down when de buffer starts to empty, rather than wait at the corner for a buffer refill +#ifdef OLD_SLOWDOWN + if(moves_queued < (BLOCK_BUFFER_SIZE * 0.5) && moves_queued > 1) feed_rate = feed_rate*moves_queued / (BLOCK_BUFFER_SIZE * 0.5); +#endif + +#ifdef SLOWDOWN + // segment time im micro seconds + unsigned long segment_time = lround(1000000.0/inverse_second); + if ((moves_queued > 1) && (moves_queued < (BLOCK_BUFFER_SIZE * 0.5))) { + if (segment_time < minsegmenttime) { // buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more. + inverse_second=1000000.0/(segment_time+lround(2*(minsegmenttime-segment_time)/moves_queued)); + } + } +#endif + // END OF SLOW DOWN SECTION + + + block->nominal_speed = block->millimeters * inverse_second; // (mm/sec) Always > 0 + block->nominal_rate = ceil(block->step_event_count * inverse_second); // (step/sec) Always > 0 + + // Calculate and limit speed in mm/sec for each axis + float current_speed[4]; + float speed_factor = 1.0; //factor <=1 do decrease speed + for(int i=0; i < 4; i++) { + current_speed[i] = delta_mm[i] * inverse_second; + if(fabs(current_speed[i]) > max_feedrate[i]) + speed_factor = min(speed_factor, max_feedrate[i] / fabs(current_speed[i])); + } + + // Max segement time in us. +#ifdef XY_FREQUENCY_LIMIT +#define MAX_FREQ_TIME (1000000.0/XY_FREQUENCY_LIMIT) + + // Check and limit the xy direction change frequency + unsigned char direction_change = block->direction_bits ^ old_direction_bits; + old_direction_bits = block->direction_bits; + + if((direction_change & (1<nominal_speed *= speed_factor; + block->nominal_rate *= speed_factor; + } + + // Compute and limit the acceleration rate for the trapezoid generator. + float steps_per_mm = block->step_event_count/block->millimeters; + if(block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0) { + block->acceleration_st = ceil(retract_acceleration * steps_per_mm); // convert to: acceleration steps/sec^2 + } + else { + block->acceleration_st = ceil(acceleration * steps_per_mm); // convert to: acceleration steps/sec^2 + // Limit acceleration per axis + if(((float)block->acceleration_st * (float)block->steps_x / (float)block->step_event_count) > axis_steps_per_sqr_second[X_AXIS]) + block->acceleration_st = axis_steps_per_sqr_second[X_AXIS]; + if(((float)block->acceleration_st * (float)block->steps_y / (float)block->step_event_count) > axis_steps_per_sqr_second[Y_AXIS]) + block->acceleration_st = axis_steps_per_sqr_second[Y_AXIS]; + if(((float)block->acceleration_st * (float)block->steps_e / (float)block->step_event_count) > axis_steps_per_sqr_second[E_AXIS]) + block->acceleration_st = axis_steps_per_sqr_second[E_AXIS]; + if(((float)block->acceleration_st * (float)block->steps_z / (float)block->step_event_count ) > axis_steps_per_sqr_second[Z_AXIS]) + block->acceleration_st = axis_steps_per_sqr_second[Z_AXIS]; + } + block->acceleration = block->acceleration_st / steps_per_mm; + block->acceleration_rate = (long)((float)block->acceleration_st * 8.388608); + +#if 0 // Use old jerk for now + // Compute path unit vector + double unit_vec[3]; + + unit_vec[X_AXIS] = delta_mm[X_AXIS]*inverse_millimeters; + unit_vec[Y_AXIS] = delta_mm[Y_AXIS]*inverse_millimeters; + unit_vec[Z_AXIS] = delta_mm[Z_AXIS]*inverse_millimeters; + + // Compute maximum allowable entry speed at junction by centripetal acceleration approximation. + // Let a circle be tangent to both previous and current path line segments, where the junction + // deviation is defined as the distance from the junction to the closest edge of the circle, + // colinear with the circle center. The circular segment joining the two paths represents the + // path of centripetal acceleration. Solve for max velocity based on max acceleration about the + // radius of the circle, defined indirectly by junction deviation. This may be also viewed as + // path width or max_jerk in the previous grbl version. This approach does not actually deviate + // from path, but used as a robust way to compute cornering speeds, as it takes into account the + // nonlinearities of both the junction angle and junction velocity. + double vmax_junction = MINIMUM_PLANNER_SPEED; // Set default max junction speed + + // Skip first block or when previous_nominal_speed is used as a flag for homing and offset cycles. + if ((block_buffer_head != block_buffer_tail) && (previous_nominal_speed > 0.0)) { + // Compute cosine of angle between previous and current path. (prev_unit_vec is negative) + // NOTE: Max junction velocity is computed without sin() or acos() by trig half angle identity. + double cos_theta = - previous_unit_vec[X_AXIS] * unit_vec[X_AXIS] + - previous_unit_vec[Y_AXIS] * unit_vec[Y_AXIS] + - previous_unit_vec[Z_AXIS] * unit_vec[Z_AXIS] ; + + // Skip and use default max junction speed for 0 degree acute junction. + if (cos_theta < 0.95) { + vmax_junction = min(previous_nominal_speed,block->nominal_speed); + // Skip and avoid divide by zero for straight junctions at 180 degrees. Limit to min() of nominal speeds. + if (cos_theta > -0.95) { + // Compute maximum junction velocity based on maximum acceleration and junction deviation + double sin_theta_d2 = sqrt(0.5*(1.0-cos_theta)); // Trig half angle identity. Always positive. + vmax_junction = min(vmax_junction, + sqrt(block->acceleration * junction_deviation * sin_theta_d2/(1.0-sin_theta_d2)) ); + } + } + } +#endif + // Start with a safe speed + float vmax_junction = max_xy_jerk/2; + float vmax_junction_factor = 1.0; + if(fabs(current_speed[Z_AXIS]) > max_z_jerk/2) + vmax_junction = min(vmax_junction, max_z_jerk/2); + if(fabs(current_speed[E_AXIS]) > max_e_jerk/2) + vmax_junction = min(vmax_junction, max_e_jerk/2); + vmax_junction = min(vmax_junction, block->nominal_speed); + float safe_speed = vmax_junction; + + if ((moves_queued > 1) && (previous_nominal_speed > 0.0001)) { + float jerk = sqrt(pow((current_speed[X_AXIS]-previous_speed[X_AXIS]), 2)+pow((current_speed[Y_AXIS]-previous_speed[Y_AXIS]), 2)); + // if((fabs(previous_speed[X_AXIS]) > 0.0001) || (fabs(previous_speed[Y_AXIS]) > 0.0001)) { + vmax_junction = block->nominal_speed; + // } + if (jerk > max_xy_jerk) { + vmax_junction_factor = (max_xy_jerk/jerk); + } + if(fabs(current_speed[Z_AXIS] - previous_speed[Z_AXIS]) > max_z_jerk) { + vmax_junction_factor= min(vmax_junction_factor, (max_z_jerk/fabs(current_speed[Z_AXIS] - previous_speed[Z_AXIS]))); + } + if(fabs(current_speed[E_AXIS] - previous_speed[E_AXIS]) > max_e_jerk) { + vmax_junction_factor = min(vmax_junction_factor, (max_e_jerk/fabs(current_speed[E_AXIS] - previous_speed[E_AXIS]))); + } + vmax_junction = min(previous_nominal_speed, vmax_junction * vmax_junction_factor); // Limit speed to max previous speed + } + block->max_entry_speed = vmax_junction; + + // Initialize block entry speed. Compute based on deceleration to user-defined MINIMUM_PLANNER_SPEED. + double v_allowable = max_allowable_speed(-block->acceleration,MINIMUM_PLANNER_SPEED,block->millimeters); + block->entry_speed = min(vmax_junction, v_allowable); + + // Initialize planner efficiency flags + // Set flag if block will always reach maximum junction speed regardless of entry/exit speeds. + // If a block can de/ac-celerate from nominal speed to zero within the length of the block, then + // the current block and next block junction speeds are guaranteed to always be at their maximum + // junction speeds in deceleration and acceleration, respectively. This is due to how the current + // block nominal speed limits both the current and next maximum junction speeds. Hence, in both + // the reverse and forward planners, the corresponding block junction speed will always be at the + // the maximum junction speed and may always be ignored for any speed reduction checks. + if (block->nominal_speed <= v_allowable) { + block->nominal_length_flag = true; + } + else { + block->nominal_length_flag = false; + } + block->recalculate_flag = true; // Always calculate trapezoid for new block + + // Update previous path unit_vector and nominal speed + memcpy(previous_speed, current_speed, sizeof(previous_speed)); // previous_speed[] = current_speed[] + previous_nominal_speed = block->nominal_speed; + + +#ifdef ADVANCE + // Calculate advance rate + if((block->steps_e == 0) || (block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0)) { + block->advance_rate = 0; + block->advance = 0; + } + else { + long acc_dist = estimate_acceleration_distance(0, block->nominal_rate, block->acceleration_st); + float advance = (STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K) * + (current_speed[E_AXIS] * current_speed[E_AXIS] * EXTRUTION_AREA * EXTRUTION_AREA)*256; + block->advance = advance; + if(acc_dist == 0) { + block->advance_rate = 0; + } + else { + block->advance_rate = advance / (float)acc_dist; + } + } + /* + SERIAL_ECHO_START; + SERIAL_ECHOPGM("advance :"); + SERIAL_ECHO(block->advance/256.0); + SERIAL_ECHOPGM("advance rate :"); + SERIAL_ECHOLN(block->advance_rate/256.0); + */ +#endif // ADVANCE + + calculate_trapezoid_for_block(block, block->entry_speed/block->nominal_speed, + safe_speed/block->nominal_speed); + + // Move buffer head + block_buffer_head = next_buffer_head; + + // Update position + memcpy(position, target, sizeof(target)); // position[] = target[] + + planner_recalculate(); + + st_wake_up(); +} + +void plan_set_position(const float &x, const float &y, const float &z, const float &e) +{ + position[X_AXIS] = lround(x*axis_steps_per_unit[X_AXIS]); + position[Y_AXIS] = lround(y*axis_steps_per_unit[Y_AXIS]); + position[Z_AXIS] = lround(z*axis_steps_per_unit[Z_AXIS]); + position[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]); + st_set_position(position[X_AXIS], position[Y_AXIS], position[Z_AXIS], position[E_AXIS]); + previous_nominal_speed = 0.0; // Resets planner junction speeds. Assumes start from rest. + previous_speed[0] = 0.0; + previous_speed[1] = 0.0; + previous_speed[2] = 0.0; + previous_speed[3] = 0.0; +} + +void plan_set_e_position(const float &e) +{ + position[E_AXIS] = lround(e*axis_steps_per_unit[E_AXIS]); + st_set_e_position(position[E_AXIS]); +} + +uint8_t movesplanned() +{ + return (block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1); +} + +void allow_cold_extrudes(bool allow) +{ +#ifdef PREVENT_DANGEROUS_EXTRUDE + allow_cold_extrude=allow; +#endif +} + diff --git a/Marlin/Marlin/planner.h b/Marlin/Marlin/planner.h new file mode 100644 index 0000000000..fc0d83c2b8 --- /dev/null +++ b/Marlin/Marlin/planner.h @@ -0,0 +1,139 @@ +/* + planner.h - buffers movement commands and manages the acceleration profile plan + Part of Grbl + + Copyright (c) 2009-2011 Simen Svale Skogsrud + + Grbl is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Grbl is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Grbl. If not, see . +*/ + +// This module is to be considered a sub-module of stepper.c. Please don't include +// this file from any other module. + +#ifndef planner_h +#define planner_h + +#include "Marlin.h" + +// This struct is used when buffering the setup for each linear movement "nominal" values are as specified in +// the source g-code and may never actually be reached if acceleration management is active. +typedef struct { + // Fields used by the bresenham algorithm for tracing the line + long steps_x, steps_y, steps_z, steps_e; // Step count along each axis + unsigned long step_event_count; // The number of step events required to complete this block + long accelerate_until; // The index of the step event on which to stop acceleration + long decelerate_after; // The index of the step event on which to start decelerating + long acceleration_rate; // The acceleration rate used for acceleration calculation + unsigned char direction_bits; // The direction bit set for this block (refers to *_DIRECTION_BIT in config.h) + unsigned char active_extruder; // Selects the active extruder + #ifdef ADVANCE + long advance_rate; + volatile long initial_advance; + volatile long final_advance; + float advance; + #endif + + // Fields used by the motion planner to manage acceleration +// float speed_x, speed_y, speed_z, speed_e; // Nominal mm/sec for each axis + float nominal_speed; // The nominal speed for this block in mm/sec + float entry_speed; // Entry speed at previous-current junction in mm/sec + float max_entry_speed; // Maximum allowable junction entry speed in mm/sec + float millimeters; // The total travel of this block in mm + float acceleration; // acceleration mm/sec^2 + unsigned char recalculate_flag; // Planner flag to recalculate trapezoids on entry junction + unsigned char nominal_length_flag; // Planner flag for nominal speed always reached + + // Settings for the trapezoid generator + unsigned long nominal_rate; // The nominal step rate for this block in step_events/sec + unsigned long initial_rate; // The jerk-adjusted step rate at start of block + unsigned long final_rate; // The minimal rate at exit + unsigned long acceleration_st; // acceleration steps/sec^2 + unsigned long fan_speed; + volatile char busy; +} block_t; + +// Initialize the motion plan subsystem +void plan_init(); + +// Add a new linear movement to the buffer. x, y and z is the signed, absolute target position in +// millimaters. Feed rate specifies the speed of the motion. +void plan_buffer_line(const float &x, const float &y, const float &z, const float &e, float feed_rate, const uint8_t &extruder); + +// Set position. Used for G92 instructions. +void plan_set_position(const float &x, const float &y, const float &z, const float &e); +void plan_set_e_position(const float &e); + + + +void check_axes_activity(); +uint8_t movesplanned(); //return the nr of buffered moves + +extern unsigned long minsegmenttime; +extern float max_feedrate[4]; // set the max speeds +extern float axis_steps_per_unit[4]; +extern unsigned long max_acceleration_units_per_sq_second[4]; // Use M201 to override by software +extern float minimumfeedrate; +extern float acceleration; // Normal acceleration mm/s^2 THIS IS THE DEFAULT ACCELERATION for all moves. M204 SXXXX +extern float retract_acceleration; // mm/s^2 filament pull-pack and push-forward while standing still in the other axis M204 TXXXX +extern float max_xy_jerk; //speed than can be stopped at once, if i understand correctly. +extern float max_z_jerk; +extern float max_e_jerk; +extern float mintravelfeedrate; +extern unsigned long axis_steps_per_sqr_second[NUM_AXIS]; + +#ifdef AUTOTEMP + extern bool autotemp_enabled; + extern float autotemp_max; + extern float autotemp_min; + extern float autotemp_factor; +#endif + + + + +extern block_t block_buffer[BLOCK_BUFFER_SIZE]; // A ring buffer for motion instfructions +extern volatile unsigned char block_buffer_head; // Index of the next block to be pushed +extern volatile unsigned char block_buffer_tail; +// Called when the current block is no longer needed. Discards the block and makes the memory +// availible for new blocks. +FORCE_INLINE void plan_discard_current_block() +{ + if (block_buffer_head != block_buffer_tail) { + block_buffer_tail = (block_buffer_tail + 1) & (BLOCK_BUFFER_SIZE - 1); + } +} + +// Gets the current block. Returns NULL if buffer empty +FORCE_INLINE block_t *plan_get_current_block() +{ + if (block_buffer_head == block_buffer_tail) { + return(NULL); + } + block_t *block = &block_buffer[block_buffer_tail]; + block->busy = true; + return(block); +} + +// Gets the current block. Returns NULL if buffer empty +FORCE_INLINE bool blocks_queued() +{ + if (block_buffer_head == block_buffer_tail) { + return false; + } + else + return true; +} + +void allow_cold_extrudes(bool allow); +#endif diff --git a/Marlin/Marlin/speed_lookuptable.h b/Marlin/Marlin/speed_lookuptable.h new file mode 100644 index 0000000000..670e744c73 --- /dev/null +++ b/Marlin/Marlin/speed_lookuptable.h @@ -0,0 +1,152 @@ +#ifndef SPEED_LOOKUPTABLE_H +#define SPEED_LOOKUPTABLE_H + +#include "Marlin.h" + +#if F_CPU == 16000000 + +const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {\ +{ 62500, 55556}, { 6944, 3268}, { 3676, 1176}, { 2500, 607}, { 1893, 369}, { 1524, 249}, { 1275, 179}, { 1096, 135}, +{ 961, 105}, { 856, 85}, { 771, 69}, { 702, 58}, { 644, 49}, { 595, 42}, { 553, 37}, { 516, 32}, +{ 484, 28}, { 456, 25}, { 431, 23}, { 408, 20}, { 388, 19}, { 369, 16}, { 353, 16}, { 337, 14}, +{ 323, 13}, { 310, 11}, { 299, 11}, { 288, 11}, { 277, 9}, { 268, 9}, { 259, 8}, { 251, 8}, +{ 243, 8}, { 235, 7}, { 228, 6}, { 222, 6}, { 216, 6}, { 210, 6}, { 204, 5}, { 199, 5}, +{ 194, 5}, { 189, 4}, { 185, 4}, { 181, 4}, { 177, 4}, { 173, 4}, { 169, 4}, { 165, 3}, +{ 162, 3}, { 159, 4}, { 155, 3}, { 152, 3}, { 149, 2}, { 147, 3}, { 144, 3}, { 141, 2}, +{ 139, 3}, { 136, 2}, { 134, 2}, { 132, 3}, { 129, 2}, { 127, 2}, { 125, 2}, { 123, 2}, +{ 121, 2}, { 119, 1}, { 118, 2}, { 116, 2}, { 114, 1}, { 113, 2}, { 111, 2}, { 109, 1}, +{ 108, 2}, { 106, 1}, { 105, 2}, { 103, 1}, { 102, 1}, { 101, 1}, { 100, 2}, { 98, 1}, +{ 97, 1}, { 96, 1}, { 95, 2}, { 93, 1}, { 92, 1}, { 91, 1}, { 90, 1}, { 89, 1}, +{ 88, 1}, { 87, 1}, { 86, 1}, { 85, 1}, { 84, 1}, { 83, 0}, { 83, 1}, { 82, 1}, +{ 81, 1}, { 80, 1}, { 79, 1}, { 78, 0}, { 78, 1}, { 77, 1}, { 76, 1}, { 75, 0}, +{ 75, 1}, { 74, 1}, { 73, 1}, { 72, 0}, { 72, 1}, { 71, 1}, { 70, 0}, { 70, 1}, +{ 69, 0}, { 69, 1}, { 68, 1}, { 67, 0}, { 67, 1}, { 66, 0}, { 66, 1}, { 65, 0}, +{ 65, 1}, { 64, 1}, { 63, 0}, { 63, 1}, { 62, 0}, { 62, 1}, { 61, 0}, { 61, 1}, +{ 60, 0}, { 60, 0}, { 60, 1}, { 59, 0}, { 59, 1}, { 58, 0}, { 58, 1}, { 57, 0}, +{ 57, 1}, { 56, 0}, { 56, 0}, { 56, 1}, { 55, 0}, { 55, 1}, { 54, 0}, { 54, 0}, +{ 54, 1}, { 53, 0}, { 53, 0}, { 53, 1}, { 52, 0}, { 52, 0}, { 52, 1}, { 51, 0}, +{ 51, 0}, { 51, 1}, { 50, 0}, { 50, 0}, { 50, 1}, { 49, 0}, { 49, 0}, { 49, 1}, +{ 48, 0}, { 48, 0}, { 48, 1}, { 47, 0}, { 47, 0}, { 47, 0}, { 47, 1}, { 46, 0}, +{ 46, 0}, { 46, 1}, { 45, 0}, { 45, 0}, { 45, 0}, { 45, 1}, { 44, 0}, { 44, 0}, +{ 44, 0}, { 44, 1}, { 43, 0}, { 43, 0}, { 43, 0}, { 43, 1}, { 42, 0}, { 42, 0}, +{ 42, 0}, { 42, 1}, { 41, 0}, { 41, 0}, { 41, 0}, { 41, 0}, { 41, 1}, { 40, 0}, +{ 40, 0}, { 40, 0}, { 40, 0}, { 40, 1}, { 39, 0}, { 39, 0}, { 39, 0}, { 39, 0}, +{ 39, 1}, { 38, 0}, { 38, 0}, { 38, 0}, { 38, 0}, { 38, 1}, { 37, 0}, { 37, 0}, +{ 37, 0}, { 37, 0}, { 37, 0}, { 37, 1}, { 36, 0}, { 36, 0}, { 36, 0}, { 36, 0}, +{ 36, 1}, { 35, 0}, { 35, 0}, { 35, 0}, { 35, 0}, { 35, 0}, { 35, 0}, { 35, 1}, +{ 34, 0}, { 34, 0}, { 34, 0}, { 34, 0}, { 34, 0}, { 34, 1}, { 33, 0}, { 33, 0}, +{ 33, 0}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 1}, { 32, 0}, { 32, 0}, { 32, 0}, +{ 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 1}, { 31, 0}, { 31, 0}, { 31, 0}, +{ 31, 0}, { 31, 0}, { 31, 0}, { 31, 1}, { 30, 0}, { 30, 0}, { 30, 0}, { 30, 0} +}; + +const uint16_t speed_lookuptable_slow[256][2] PROGMEM = {\ +{ 62500, 12500}, { 50000, 8334}, { 41666, 5952}, { 35714, 4464}, { 31250, 3473}, { 27777, 2777}, { 25000, 2273}, { 22727, 1894}, +{ 20833, 1603}, { 19230, 1373}, { 17857, 1191}, { 16666, 1041}, { 15625, 920}, { 14705, 817}, { 13888, 731}, { 13157, 657}, +{ 12500, 596}, { 11904, 541}, { 11363, 494}, { 10869, 453}, { 10416, 416}, { 10000, 385}, { 9615, 356}, { 9259, 331}, +{ 8928, 308}, { 8620, 287}, { 8333, 269}, { 8064, 252}, { 7812, 237}, { 7575, 223}, { 7352, 210}, { 7142, 198}, +{ 6944, 188}, { 6756, 178}, { 6578, 168}, { 6410, 160}, { 6250, 153}, { 6097, 145}, { 5952, 139}, { 5813, 132}, +{ 5681, 126}, { 5555, 121}, { 5434, 115}, { 5319, 111}, { 5208, 106}, { 5102, 102}, { 5000, 99}, { 4901, 94}, +{ 4807, 91}, { 4716, 87}, { 4629, 84}, { 4545, 81}, { 4464, 79}, { 4385, 75}, { 4310, 73}, { 4237, 71}, +{ 4166, 68}, { 4098, 66}, { 4032, 64}, { 3968, 62}, { 3906, 60}, { 3846, 59}, { 3787, 56}, { 3731, 55}, +{ 3676, 53}, { 3623, 52}, { 3571, 50}, { 3521, 49}, { 3472, 48}, { 3424, 46}, { 3378, 45}, { 3333, 44}, +{ 3289, 43}, { 3246, 41}, { 3205, 41}, { 3164, 39}, { 3125, 39}, { 3086, 38}, { 3048, 36}, { 3012, 36}, +{ 2976, 35}, { 2941, 35}, { 2906, 33}, { 2873, 33}, { 2840, 32}, { 2808, 31}, { 2777, 30}, { 2747, 30}, +{ 2717, 29}, { 2688, 29}, { 2659, 28}, { 2631, 27}, { 2604, 27}, { 2577, 26}, { 2551, 26}, { 2525, 25}, +{ 2500, 25}, { 2475, 25}, { 2450, 23}, { 2427, 24}, { 2403, 23}, { 2380, 22}, { 2358, 22}, { 2336, 22}, +{ 2314, 21}, { 2293, 21}, { 2272, 20}, { 2252, 20}, { 2232, 20}, { 2212, 20}, { 2192, 19}, { 2173, 18}, +{ 2155, 19}, { 2136, 18}, { 2118, 18}, { 2100, 17}, { 2083, 17}, { 2066, 17}, { 2049, 17}, { 2032, 16}, +{ 2016, 16}, { 2000, 16}, { 1984, 16}, { 1968, 15}, { 1953, 16}, { 1937, 14}, { 1923, 15}, { 1908, 15}, +{ 1893, 14}, { 1879, 14}, { 1865, 14}, { 1851, 13}, { 1838, 14}, { 1824, 13}, { 1811, 13}, { 1798, 13}, +{ 1785, 12}, { 1773, 13}, { 1760, 12}, { 1748, 12}, { 1736, 12}, { 1724, 12}, { 1712, 12}, { 1700, 11}, +{ 1689, 12}, { 1677, 11}, { 1666, 11}, { 1655, 11}, { 1644, 11}, { 1633, 10}, { 1623, 11}, { 1612, 10}, +{ 1602, 10}, { 1592, 10}, { 1582, 10}, { 1572, 10}, { 1562, 10}, { 1552, 9}, { 1543, 10}, { 1533, 9}, +{ 1524, 9}, { 1515, 9}, { 1506, 9}, { 1497, 9}, { 1488, 9}, { 1479, 9}, { 1470, 9}, { 1461, 8}, +{ 1453, 8}, { 1445, 9}, { 1436, 8}, { 1428, 8}, { 1420, 8}, { 1412, 8}, { 1404, 8}, { 1396, 8}, +{ 1388, 7}, { 1381, 8}, { 1373, 7}, { 1366, 8}, { 1358, 7}, { 1351, 7}, { 1344, 8}, { 1336, 7}, +{ 1329, 7}, { 1322, 7}, { 1315, 7}, { 1308, 6}, { 1302, 7}, { 1295, 7}, { 1288, 6}, { 1282, 7}, +{ 1275, 6}, { 1269, 7}, { 1262, 6}, { 1256, 6}, { 1250, 7}, { 1243, 6}, { 1237, 6}, { 1231, 6}, +{ 1225, 6}, { 1219, 6}, { 1213, 6}, { 1207, 6}, { 1201, 5}, { 1196, 6}, { 1190, 6}, { 1184, 5}, +{ 1179, 6}, { 1173, 5}, { 1168, 6}, { 1162, 5}, { 1157, 5}, { 1152, 6}, { 1146, 5}, { 1141, 5}, +{ 1136, 5}, { 1131, 5}, { 1126, 5}, { 1121, 5}, { 1116, 5}, { 1111, 5}, { 1106, 5}, { 1101, 5}, +{ 1096, 5}, { 1091, 5}, { 1086, 4}, { 1082, 5}, { 1077, 5}, { 1072, 4}, { 1068, 5}, { 1063, 4}, +{ 1059, 5}, { 1054, 4}, { 1050, 4}, { 1046, 5}, { 1041, 4}, { 1037, 4}, { 1033, 5}, { 1028, 4}, +{ 1024, 4}, { 1020, 4}, { 1016, 4}, { 1012, 4}, { 1008, 4}, { 1004, 4}, { 1000, 4}, { 996, 4}, +{ 992, 4}, { 988, 4}, { 984, 4}, { 980, 4}, { 976, 4}, { 972, 4}, { 968, 3}, { 965, 3} +}; + +#else + +const uint16_t speed_lookuptable_fast[256][2] PROGMEM = { + {62500, 54055}, {8445, 3917}, {4528, 1434}, {3094, 745}, {2349, 456}, {1893, 307}, {1586, 222}, {1364, 167}, + {1197, 131}, {1066, 105}, {961, 86}, {875, 72}, {803, 61}, {742, 53}, {689, 45}, {644, 40}, + {604, 35}, {569, 32}, {537, 28}, {509, 25}, {484, 23}, {461, 21}, {440, 19}, {421, 17}, + {404, 16}, {388, 15}, {373, 14}, {359, 13}, {346, 12}, {334, 11}, {323, 10}, {313, 10}, + {303, 9}, {294, 9}, {285, 8}, {277, 7}, {270, 8}, {262, 7}, {255, 6}, {249, 6}, + {243, 6}, {237, 6}, {231, 5}, {226, 5}, {221, 5}, {216, 5}, {211, 4}, {207, 5}, + {202, 4}, {198, 4}, {194, 4}, {190, 3}, {187, 4}, {183, 3}, {180, 3}, {177, 4}, + {173, 3}, {170, 3}, {167, 2}, {165, 3}, {162, 3}, {159, 2}, {157, 3}, {154, 2}, + {152, 3}, {149, 2}, {147, 2}, {145, 2}, {143, 2}, {141, 2}, {139, 2}, {137, 2}, + {135, 2}, {133, 2}, {131, 2}, {129, 1}, {128, 2}, {126, 2}, {124, 1}, {123, 2}, + {121, 1}, {120, 2}, {118, 1}, {117, 1}, {116, 2}, {114, 1}, {113, 1}, {112, 2}, + {110, 1}, {109, 1}, {108, 1}, {107, 2}, {105, 1}, {104, 1}, {103, 1}, {102, 1}, + {101, 1}, {100, 1}, {99, 1}, {98, 1}, {97, 1}, {96, 1}, {95, 1}, {94, 1}, + {93, 1}, {92, 1}, {91, 0}, {91, 1}, {90, 1}, {89, 1}, {88, 1}, {87, 0}, + {87, 1}, {86, 1}, {85, 1}, {84, 0}, {84, 1}, {83, 1}, {82, 1}, {81, 0}, + {81, 1}, {80, 1}, {79, 0}, {79, 1}, {78, 0}, {78, 1}, {77, 1}, {76, 0}, + {76, 1}, {75, 0}, {75, 1}, {74, 1}, {73, 0}, {73, 1}, {72, 0}, {72, 1}, + {71, 0}, {71, 1}, {70, 0}, {70, 1}, {69, 0}, {69, 1}, {68, 0}, {68, 1}, + {67, 0}, {67, 1}, {66, 0}, {66, 1}, {65, 0}, {65, 0}, {65, 1}, {64, 0}, + {64, 1}, {63, 0}, {63, 1}, {62, 0}, {62, 0}, {62, 1}, {61, 0}, {61, 1}, + {60, 0}, {60, 0}, {60, 1}, {59, 0}, {59, 0}, {59, 1}, {58, 0}, {58, 0}, + {58, 1}, {57, 0}, {57, 0}, {57, 1}, {56, 0}, {56, 0}, {56, 1}, {55, 0}, + {55, 0}, {55, 1}, {54, 0}, {54, 0}, {54, 1}, {53, 0}, {53, 0}, {53, 0}, + {53, 1}, {52, 0}, {52, 0}, {52, 1}, {51, 0}, {51, 0}, {51, 0}, {51, 1}, + {50, 0}, {50, 0}, {50, 0}, {50, 1}, {49, 0}, {49, 0}, {49, 0}, {49, 1}, + {48, 0}, {48, 0}, {48, 0}, {48, 1}, {47, 0}, {47, 0}, {47, 0}, {47, 1}, + {46, 0}, {46, 0}, {46, 0}, {46, 0}, {46, 1}, {45, 0}, {45, 0}, {45, 0}, + {45, 1}, {44, 0}, {44, 0}, {44, 0}, {44, 0}, {44, 1}, {43, 0}, {43, 0}, + {43, 0}, {43, 0}, {43, 1}, {42, 0}, {42, 0}, {42, 0}, {42, 0}, {42, 0}, + {42, 1}, {41, 0}, {41, 0}, {41, 0}, {41, 0}, {41, 0}, {41, 1}, {40, 0}, + {40, 0}, {40, 0}, {40, 0}, {40, 1}, {39, 0}, {39, 0}, {39, 0}, {39, 0}, + {39, 0}, {39, 0}, {39, 1}, {38, 0}, {38, 0}, {38, 0}, {38, 0}, {38, 0}, +}; + +const uint16_t speed_lookuptable_slow[256][2] PROGMEM = { + {62500, 10417}, {52083, 7441}, {44642, 5580}, {39062, 4340}, {34722, 3472}, {31250, 2841}, {28409, 2368}, {26041, 2003}, + {24038, 1717}, {22321, 1488}, {20833, 1302}, {19531, 1149}, {18382, 1021}, {17361, 914}, {16447, 822}, {15625, 745}, + {14880, 676}, {14204, 618}, {13586, 566}, {13020, 520}, {12500, 481}, {12019, 445}, {11574, 414}, {11160, 385}, + {10775, 359}, {10416, 336}, {10080, 315}, {9765, 296}, {9469, 278}, {9191, 263}, {8928, 248}, {8680, 235}, + {8445, 222}, {8223, 211}, {8012, 200}, {7812, 191}, {7621, 181}, {7440, 173}, {7267, 165}, {7102, 158}, + {6944, 151}, {6793, 145}, {6648, 138}, {6510, 133}, {6377, 127}, {6250, 123}, {6127, 118}, {6009, 113}, + {5896, 109}, {5787, 106}, {5681, 101}, {5580, 98}, {5482, 95}, {5387, 91}, {5296, 88}, {5208, 86}, + {5122, 82}, {5040, 80}, {4960, 78}, {4882, 75}, {4807, 73}, {4734, 70}, {4664, 69}, {4595, 67}, + {4528, 64}, {4464, 63}, {4401, 61}, {4340, 60}, {4280, 58}, {4222, 56}, {4166, 55}, {4111, 53}, + {4058, 52}, {4006, 51}, {3955, 49}, {3906, 48}, {3858, 48}, {3810, 45}, {3765, 45}, {3720, 44}, + {3676, 43}, {3633, 42}, {3591, 40}, {3551, 40}, {3511, 39}, {3472, 38}, {3434, 38}, {3396, 36}, + {3360, 36}, {3324, 35}, {3289, 34}, {3255, 34}, {3221, 33}, {3188, 32}, {3156, 31}, {3125, 31}, + {3094, 31}, {3063, 30}, {3033, 29}, {3004, 28}, {2976, 28}, {2948, 28}, {2920, 27}, {2893, 27}, + {2866, 26}, {2840, 25}, {2815, 25}, {2790, 25}, {2765, 24}, {2741, 24}, {2717, 24}, {2693, 23}, + {2670, 22}, {2648, 22}, {2626, 22}, {2604, 22}, {2582, 21}, {2561, 21}, {2540, 20}, {2520, 20}, + {2500, 20}, {2480, 20}, {2460, 19}, {2441, 19}, {2422, 19}, {2403, 18}, {2385, 18}, {2367, 18}, + {2349, 17}, {2332, 18}, {2314, 17}, {2297, 16}, {2281, 17}, {2264, 16}, {2248, 16}, {2232, 16}, + {2216, 16}, {2200, 15}, {2185, 15}, {2170, 15}, {2155, 15}, {2140, 15}, {2125, 14}, {2111, 14}, + {2097, 14}, {2083, 14}, {2069, 14}, {2055, 13}, {2042, 13}, {2029, 13}, {2016, 13}, {2003, 13}, + {1990, 13}, {1977, 12}, {1965, 12}, {1953, 13}, {1940, 11}, {1929, 12}, {1917, 12}, {1905, 12}, + {1893, 11}, {1882, 11}, {1871, 11}, {1860, 11}, {1849, 11}, {1838, 11}, {1827, 11}, {1816, 10}, + {1806, 11}, {1795, 10}, {1785, 10}, {1775, 10}, {1765, 10}, {1755, 10}, {1745, 9}, {1736, 10}, + {1726, 9}, {1717, 10}, {1707, 9}, {1698, 9}, {1689, 9}, {1680, 9}, {1671, 9}, {1662, 9}, + {1653, 9}, {1644, 8}, {1636, 9}, {1627, 8}, {1619, 9}, {1610, 8}, {1602, 8}, {1594, 8}, + {1586, 8}, {1578, 8}, {1570, 8}, {1562, 8}, {1554, 7}, {1547, 8}, {1539, 8}, {1531, 7}, + {1524, 8}, {1516, 7}, {1509, 7}, {1502, 7}, {1495, 7}, {1488, 7}, {1481, 7}, {1474, 7}, + {1467, 7}, {1460, 7}, {1453, 7}, {1446, 6}, {1440, 7}, {1433, 7}, {1426, 6}, {1420, 6}, + {1414, 7}, {1407, 6}, {1401, 6}, {1395, 7}, {1388, 6}, {1382, 6}, {1376, 6}, {1370, 6}, + {1364, 6}, {1358, 6}, {1352, 6}, {1346, 5}, {1341, 6}, {1335, 6}, {1329, 5}, {1324, 6}, + {1318, 5}, {1313, 6}, {1307, 5}, {1302, 6}, {1296, 5}, {1291, 5}, {1286, 6}, {1280, 5}, + {1275, 5}, {1270, 5}, {1265, 5}, {1260, 5}, {1255, 5}, {1250, 5}, {1245, 5}, {1240, 5}, + {1235, 5}, {1230, 5}, {1225, 5}, {1220, 5}, {1215, 4}, {1211, 5}, {1206, 5}, {1201, 5}, +}; + +#endif + +#endif diff --git a/Marlin/Marlin/stepper.cpp b/Marlin/Marlin/stepper.cpp new file mode 100644 index 0000000000..d5c8164b73 --- /dev/null +++ b/Marlin/Marlin/stepper.cpp @@ -0,0 +1,953 @@ +/* + stepper.c - stepper motor driver: executes motion plans using stepper motors + Part of Grbl + + Copyright (c) 2009-2011 Simen Svale Skogsrud + + Grbl is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Grbl is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Grbl. If not, see . +*/ + +/* The timer calculations of this module informed by the 'RepRap cartesian firmware' by Zack Smith + and Philipp Tiefenbacher. */ + +#include "Marlin.h" +#include "stepper.h" +#include "planner.h" +#include "temperature.h" +#include "ultralcd.h" +#include "language.h" +#include "speed_lookuptable.h" + + + +//=========================================================================== +//=============================public variables ============================ +//=========================================================================== +block_t *current_block; // A pointer to the block currently being traced + + +//=========================================================================== +//=============================private variables ============================ +//=========================================================================== +//static makes it inpossible to be called from outside of this file by extern.! + +// Variables used by The Stepper Driver Interrupt +static unsigned char out_bits; // The next stepping-bits to be output +static long counter_x, // Counter variables for the bresenham line tracer + counter_y, + counter_z, + counter_e; +volatile static unsigned long step_events_completed; // The number of step events executed in the current block +#ifdef ADVANCE + static long advance_rate, advance, final_advance = 0; + static long old_advance = 0; +#endif +static long e_steps[3]; +static long acceleration_time, deceleration_time; +//static unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate; +static unsigned short acc_step_rate; // needed for deccelaration start point +static char step_loops; +static unsigned short OCR1A_nominal; + +volatile long endstops_trigsteps[3]={0,0,0}; +volatile long endstops_stepsTotal,endstops_stepsDone; +static volatile bool endstop_x_hit=false; +static volatile bool endstop_y_hit=false; +static volatile bool endstop_z_hit=false; + +static bool old_x_min_endstop=false; +static bool old_x_max_endstop=false; +static bool old_y_min_endstop=false; +static bool old_y_max_endstop=false; +static bool old_z_min_endstop=false; +static bool old_z_max_endstop=false; + +static bool check_endstops = true; + +volatile long count_position[NUM_AXIS] = { 0, 0, 0, 0}; +volatile char count_direction[NUM_AXIS] = { 1, 1, 1, 1}; + +//=========================================================================== +//=============================functions ============================ +//=========================================================================== + +#define CHECK_ENDSTOPS if(check_endstops) + +// intRes = intIn1 * intIn2 >> 16 +// uses: +// r26 to store 0 +// r27 to store the byte 1 of the 24 bit result +#define MultiU16X8toH16(intRes, charIn1, intIn2) \ +asm volatile ( \ +"clr r26 \n\t" \ +"mul %A1, %B2 \n\t" \ +"movw %A0, r0 \n\t" \ +"mul %A1, %A2 \n\t" \ +"add %A0, r1 \n\t" \ +"adc %B0, r26 \n\t" \ +"lsr r0 \n\t" \ +"adc %A0, r26 \n\t" \ +"adc %B0, r26 \n\t" \ +"clr r1 \n\t" \ +: \ +"=&r" (intRes) \ +: \ +"d" (charIn1), \ +"d" (intIn2) \ +: \ +"r26" \ +) + +// intRes = longIn1 * longIn2 >> 24 +// uses: +// r26 to store 0 +// r27 to store the byte 1 of the 48bit result +#define MultiU24X24toH16(intRes, longIn1, longIn2) \ +asm volatile ( \ +"clr r26 \n\t" \ +"mul %A1, %B2 \n\t" \ +"mov r27, r1 \n\t" \ +"mul %B1, %C2 \n\t" \ +"movw %A0, r0 \n\t" \ +"mul %C1, %C2 \n\t" \ +"add %B0, r0 \n\t" \ +"mul %C1, %B2 \n\t" \ +"add %A0, r0 \n\t" \ +"adc %B0, r1 \n\t" \ +"mul %A1, %C2 \n\t" \ +"add r27, r0 \n\t" \ +"adc %A0, r1 \n\t" \ +"adc %B0, r26 \n\t" \ +"mul %B1, %B2 \n\t" \ +"add r27, r0 \n\t" \ +"adc %A0, r1 \n\t" \ +"adc %B0, r26 \n\t" \ +"mul %C1, %A2 \n\t" \ +"add r27, r0 \n\t" \ +"adc %A0, r1 \n\t" \ +"adc %B0, r26 \n\t" \ +"mul %B1, %A2 \n\t" \ +"add r27, r1 \n\t" \ +"adc %A0, r26 \n\t" \ +"adc %B0, r26 \n\t" \ +"lsr r27 \n\t" \ +"adc %A0, r26 \n\t" \ +"adc %B0, r26 \n\t" \ +"clr r1 \n\t" \ +: \ +"=&r" (intRes) \ +: \ +"d" (longIn1), \ +"d" (longIn2) \ +: \ +"r26" , "r27" \ +) + +// Some useful constants + +#define ENABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 |= (1< +// +// The trapezoid is the shape the speed curve over time. It starts at block->initial_rate, accelerates +// first block->accelerate_until step_events_completed, then keeps going at constant speed until +// step_events_completed reaches block->decelerate_after after which it decelerates until the trapezoid generator is reset. +// The slope of acceleration is calculated with the leib ramp alghorithm. + +void st_wake_up() { + // TCNT1 = 0; + ENABLE_STEPPER_DRIVER_INTERRUPT(); +} + +void step_wait(){ + for(int8_t i=0; i < 6; i++){ + } +} + + +FORCE_INLINE unsigned short calc_timer(unsigned short step_rate) { + unsigned short timer; + if(step_rate > MAX_STEP_FREQUENCY) step_rate = MAX_STEP_FREQUENCY; + + if(step_rate > 20000) { // If steprate > 20kHz >> step 4 times + step_rate = (step_rate >> 2)&0x3fff; + step_loops = 4; + } + else if(step_rate > 10000) { // If steprate > 10kHz >> step 2 times + step_rate = (step_rate >> 1)&0x7fff; + step_loops = 2; + } + else { + step_loops = 1; + } + + if(step_rate < (F_CPU/500000)) step_rate = (F_CPU/500000); + step_rate -= (F_CPU/500000); // Correct for minimal speed + if(step_rate >= (8*256)){ // higher step rate + unsigned short table_address = (unsigned short)&speed_lookuptable_fast[(unsigned char)(step_rate>>8)][0]; + unsigned char tmp_step_rate = (step_rate & 0x00ff); + unsigned short gain = (unsigned short)pgm_read_word_near(table_address+2); + MultiU16X8toH16(timer, tmp_step_rate, gain); + timer = (unsigned short)pgm_read_word_near(table_address) - timer; + } + else { // lower step rates + unsigned short table_address = (unsigned short)&speed_lookuptable_slow[0][0]; + table_address += ((step_rate)>>1) & 0xfffc; + timer = (unsigned short)pgm_read_word_near(table_address); + timer -= (((unsigned short)pgm_read_word_near(table_address+2) * (unsigned char)(step_rate & 0x0007))>>3); + } + if(timer < 100) { timer = 100; MYSERIAL.print(MSG_STEPPER_TO_HIGH); MYSERIAL.println(step_rate); }//(20kHz this should never happen) + return timer; +} + +// Initializes the trapezoid generator from the current block. Called whenever a new +// block begins. +FORCE_INLINE void trapezoid_generator_reset() { + #ifdef ADVANCE + advance = current_block->initial_advance; + final_advance = current_block->final_advance; + // Do E steps + advance steps + e_steps[current_block->active_extruder] += ((advance >>8) - old_advance); + old_advance = advance >>8; + #endif + deceleration_time = 0; + // step_rate to timer interval + OCR1A_nominal = calc_timer(current_block->nominal_rate); + acc_step_rate = current_block->initial_rate; + acceleration_time = calc_timer(acc_step_rate); + OCR1A = acceleration_time; + +// SERIAL_ECHO_START; +// SERIAL_ECHOPGM("advance :"); +// SERIAL_ECHO(current_block->advance/256.0); +// SERIAL_ECHOPGM("advance rate :"); +// SERIAL_ECHO(current_block->advance_rate/256.0); +// SERIAL_ECHOPGM("initial advance :"); +// SERIAL_ECHO(current_block->initial_advance/256.0); +// SERIAL_ECHOPGM("final advance :"); +// SERIAL_ECHOLN(current_block->final_advance/256.0); + +} + +// "The Stepper Driver Interrupt" - This timer interrupt is the workhorse. +// It pops blocks from the block_buffer and executes them by pulsing the stepper pins appropriately. +ISR(TIMER1_COMPA_vect) +{ + // If there is no current block, attempt to pop one from the buffer + if (current_block == NULL) { + // Anything in the buffer? + current_block = plan_get_current_block(); + if (current_block != NULL) { + current_block->busy = true; + trapezoid_generator_reset(); + counter_x = -(current_block->step_event_count >> 1); + counter_y = counter_x; + counter_z = counter_x; + counter_e = counter_x; + step_events_completed = 0; + + #ifdef Z_LATE_ENABLE + if(current_block->steps_z > 0) { + enable_z(); + OCR1A = 2000; //1ms wait + return; + } + #endif + +// #ifdef ADVANCE +// e_steps[current_block->active_extruder] = 0; +// #endif + } + else { + OCR1A=2000; // 1kHz. + } + } + + if (current_block != NULL) { + // Set directions TO DO This should be done once during init of trapezoid. Endstops -> interrupt + out_bits = current_block->direction_bits; + + // Set direction en check limit switches + if ((out_bits & (1< -1 + bool x_min_endstop=(READ(X_MIN_PIN) != X_ENDSTOPS_INVERTING); + if(x_min_endstop && old_x_min_endstop && (current_block->steps_x > 0)) { + endstops_trigsteps[X_AXIS] = count_position[X_AXIS]; + endstop_x_hit=true; + step_events_completed = current_block->step_event_count; + } + old_x_min_endstop = x_min_endstop; + #endif + } + } + else { // +direction + #if !defined COREXY //NOT COREXY + WRITE(X_DIR_PIN,!INVERT_X_DIR); + #endif + + count_direction[X_AXIS]=1; + CHECK_ENDSTOPS + { + #if X_MAX_PIN > -1 + bool x_max_endstop=(READ(X_MAX_PIN) != X_ENDSTOPS_INVERTING); + if(x_max_endstop && old_x_max_endstop && (current_block->steps_x > 0)){ + endstops_trigsteps[X_AXIS] = count_position[X_AXIS]; + endstop_x_hit=true; + step_events_completed = current_block->step_event_count; + } + old_x_max_endstop = x_max_endstop; + #endif + } + } + + if ((out_bits & (1< -1 + bool y_min_endstop=(READ(Y_MIN_PIN) != Y_ENDSTOPS_INVERTING); + if(y_min_endstop && old_y_min_endstop && (current_block->steps_y > 0)) { + endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS]; + endstop_y_hit=true; + step_events_completed = current_block->step_event_count; + } + old_y_min_endstop = y_min_endstop; + #endif + } + } + else { // +direction + #if !defined COREXY //NOT COREXY + WRITE(Y_DIR_PIN,!INVERT_Y_DIR); + #endif + count_direction[Y_AXIS]=1; + CHECK_ENDSTOPS + { + #if Y_MAX_PIN > -1 + bool y_max_endstop=(READ(Y_MAX_PIN) != Y_ENDSTOPS_INVERTING); + if(y_max_endstop && old_y_max_endstop && (current_block->steps_y > 0)){ + endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS]; + endstop_y_hit=true; + step_events_completed = current_block->step_event_count; + } + old_y_max_endstop = y_max_endstop; + #endif + } + } + + + #ifdef COREXY //coreXY kinematics defined + if((current_block->steps_x >= current_block->steps_y)&&((out_bits & (1<steps_x >= current_block->steps_y)&&((out_bits & (1<steps_y > current_block->steps_x)&&((out_bits & (1<steps_y > current_block->steps_x)&&((out_bits & (1< -1 + bool z_min_endstop=(READ(Z_MIN_PIN) != Z_ENDSTOPS_INVERTING); + if(z_min_endstop && old_z_min_endstop && (current_block->steps_z > 0)) { + endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS]; + endstop_z_hit=true; + step_events_completed = current_block->step_event_count; + } + old_z_min_endstop = z_min_endstop; + #endif + } + } + else { // +direction + WRITE(Z_DIR_PIN,!INVERT_Z_DIR); + + #ifdef Z_DUAL_STEPPER_DRIVERS + WRITE(Z2_DIR_PIN,!INVERT_Z_DIR); + #endif + + count_direction[Z_AXIS]=1; + CHECK_ENDSTOPS + { + #if Z_MAX_PIN > -1 + bool z_max_endstop=(READ(Z_MAX_PIN) != Z_ENDSTOPS_INVERTING); + if(z_max_endstop && old_z_max_endstop && (current_block->steps_z > 0)) { + endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS]; + endstop_z_hit=true; + step_events_completed = current_block->step_event_count; + } + old_z_max_endstop = z_max_endstop; + #endif + } + } + + #ifndef ADVANCE + if ((out_bits & (1<steps_e; + if (counter_e > 0) { + counter_e -= current_block->step_event_count; + if ((out_bits & (1<active_extruder]--; + } + else { + e_steps[current_block->active_extruder]++; + } + } + #endif //ADVANCE + + #if !defined COREXY + counter_x += current_block->steps_x; + if (counter_x > 0) { + WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN); + counter_x -= current_block->step_event_count; + count_position[X_AXIS]+=count_direction[X_AXIS]; + WRITE(X_STEP_PIN, INVERT_X_STEP_PIN); + } + + counter_y += current_block->steps_y; + if (counter_y > 0) { + WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN); + counter_y -= current_block->step_event_count; + count_position[Y_AXIS]+=count_direction[Y_AXIS]; + WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN); + } + #endif + + #ifdef COREXY + counter_x += current_block->steps_x; + counter_y += current_block->steps_y; + + if ((counter_x > 0)&&!(counter_y>0)){ //X step only + WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN); + WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN); + counter_x -= current_block->step_event_count; + count_position[X_AXIS]+=count_direction[X_AXIS]; + WRITE(X_STEP_PIN, INVERT_X_STEP_PIN); + WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN); + } + + if (!(counter_x > 0)&&(counter_y>0)){ //Y step only + WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN); + WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN); + counter_y -= current_block->step_event_count; + count_position[Y_AXIS]+=count_direction[Y_AXIS]; + WRITE(X_STEP_PIN, INVERT_X_STEP_PIN); + WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN); + } + + if ((counter_x > 0)&&(counter_y>0)){ //step in both axes + if (((out_bits & (1<step_event_count; + WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN); + step_wait(); + count_position[X_AXIS]+=count_direction[X_AXIS]; + count_position[Y_AXIS]+=count_direction[Y_AXIS]; + WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN); + counter_y -= current_block->step_event_count; + WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN); + } + else{ //X and Y in same direction + WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN); + counter_x -= current_block->step_event_count; + WRITE(X_STEP_PIN, INVERT_X_STEP_PIN) ; + step_wait(); + count_position[X_AXIS]+=count_direction[X_AXIS]; + count_position[Y_AXIS]+=count_direction[Y_AXIS]; + WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN); + counter_y -= current_block->step_event_count; + WRITE(X_STEP_PIN, INVERT_X_STEP_PIN); + } + } + #endif //corexy + + counter_z += current_block->steps_z; + if (counter_z > 0) { + WRITE(Z_STEP_PIN, !INVERT_Z_STEP_PIN); + + #ifdef Z_DUAL_STEPPER_DRIVERS + WRITE(Z2_STEP_PIN, !INVERT_Z_STEP_PIN); + #endif + + counter_z -= current_block->step_event_count; + count_position[Z_AXIS]+=count_direction[Z_AXIS]; + WRITE(Z_STEP_PIN, INVERT_Z_STEP_PIN); + + #ifdef Z_DUAL_STEPPER_DRIVERS + WRITE(Z2_STEP_PIN, INVERT_Z_STEP_PIN); + #endif + } + + #ifndef ADVANCE + counter_e += current_block->steps_e; + if (counter_e > 0) { + WRITE_E_STEP(!INVERT_E_STEP_PIN); + counter_e -= current_block->step_event_count; + count_position[E_AXIS]+=count_direction[E_AXIS]; + WRITE_E_STEP(INVERT_E_STEP_PIN); + } + #endif //!ADVANCE + step_events_completed += 1; + if(step_events_completed >= current_block->step_event_count) break; + } + // Calculare new timer value + unsigned short timer; + unsigned short step_rate; + if (step_events_completed <= (unsigned long int)current_block->accelerate_until) { + + MultiU24X24toH16(acc_step_rate, acceleration_time, current_block->acceleration_rate); + acc_step_rate += current_block->initial_rate; + + // upper limit + if(acc_step_rate > current_block->nominal_rate) + acc_step_rate = current_block->nominal_rate; + + // step_rate to timer interval + timer = calc_timer(acc_step_rate); + OCR1A = timer; + acceleration_time += timer; + #ifdef ADVANCE + for(int8_t i=0; i < step_loops; i++) { + advance += advance_rate; + } + //if(advance > current_block->advance) advance = current_block->advance; + // Do E steps + advance steps + e_steps[current_block->active_extruder] += ((advance >>8) - old_advance); + old_advance = advance >>8; + + #endif + } + else if (step_events_completed > (unsigned long int)current_block->decelerate_after) { + MultiU24X24toH16(step_rate, deceleration_time, current_block->acceleration_rate); + + if(step_rate > acc_step_rate) { // Check step_rate stays positive + step_rate = current_block->final_rate; + } + else { + step_rate = acc_step_rate - step_rate; // Decelerate from aceleration end point. + } + + // lower limit + if(step_rate < current_block->final_rate) + step_rate = current_block->final_rate; + + // step_rate to timer interval + timer = calc_timer(step_rate); + OCR1A = timer; + deceleration_time += timer; + #ifdef ADVANCE + for(int8_t i=0; i < step_loops; i++) { + advance -= advance_rate; + } + if(advance < final_advance) advance = final_advance; + // Do E steps + advance steps + e_steps[current_block->active_extruder] += ((advance >>8) - old_advance); + old_advance = advance >>8; + #endif //ADVANCE + } + else { + OCR1A = OCR1A_nominal; + } + + // If current block is finished, reset pointer + if (step_events_completed >= current_block->step_event_count) { + current_block = NULL; + plan_discard_current_block(); + } + } +} + +#ifdef ADVANCE + unsigned char old_OCR0A; + // Timer interrupt for E. e_steps is set in the main routine; + // Timer 0 is shared with millies + ISR(TIMER0_COMPA_vect) + { + old_OCR0A += 52; // ~10kHz interrupt (250000 / 26 = 9615kHz) + OCR0A = old_OCR0A; + // Set E direction (Depends on E direction + advance) + for(unsigned char i=0; i<4;i++) { + if (e_steps[0] != 0) { + WRITE(E0_STEP_PIN, INVERT_E_STEP_PIN); + if (e_steps[0] < 0) { + WRITE(E0_DIR_PIN, INVERT_E0_DIR); + e_steps[0]++; + WRITE(E0_STEP_PIN, !INVERT_E_STEP_PIN); + } + else if (e_steps[0] > 0) { + WRITE(E0_DIR_PIN, !INVERT_E0_DIR); + e_steps[0]--; + WRITE(E0_STEP_PIN, !INVERT_E_STEP_PIN); + } + } + #if EXTRUDERS > 1 + if (e_steps[1] != 0) { + WRITE(E1_STEP_PIN, INVERT_E_STEP_PIN); + if (e_steps[1] < 0) { + WRITE(E1_DIR_PIN, INVERT_E1_DIR); + e_steps[1]++; + WRITE(E1_STEP_PIN, !INVERT_E_STEP_PIN); + } + else if (e_steps[1] > 0) { + WRITE(E1_DIR_PIN, !INVERT_E1_DIR); + e_steps[1]--; + WRITE(E1_STEP_PIN, !INVERT_E_STEP_PIN); + } + } + #endif + #if EXTRUDERS > 2 + if (e_steps[2] != 0) { + WRITE(E2_STEP_PIN, INVERT_E_STEP_PIN); + if (e_steps[2] < 0) { + WRITE(E2_DIR_PIN, INVERT_E2_DIR); + e_steps[2]++; + WRITE(E2_STEP_PIN, !INVERT_E_STEP_PIN); + } + else if (e_steps[2] > 0) { + WRITE(E2_DIR_PIN, !INVERT_E2_DIR); + e_steps[2]--; + WRITE(E2_STEP_PIN, !INVERT_E_STEP_PIN); + } + } + #endif + } + } +#endif // ADVANCE + +void st_init() +{ + //Initialize Dir Pins + #if X_DIR_PIN > -1 + SET_OUTPUT(X_DIR_PIN); + #endif + #if Y_DIR_PIN > -1 + SET_OUTPUT(Y_DIR_PIN); + #endif + #if Z_DIR_PIN > -1 + SET_OUTPUT(Z_DIR_PIN); + + #if defined(Z_DUAL_STEPPER_DRIVERS) && (Z2_DIR_PIN > -1) + SET_OUTPUT(Z2_DIR_PIN); + #endif + #endif + #if E0_DIR_PIN > -1 + SET_OUTPUT(E0_DIR_PIN); + #endif + #if defined(E1_DIR_PIN) && (E1_DIR_PIN > -1) + SET_OUTPUT(E1_DIR_PIN); + #endif + #if defined(E2_DIR_PIN) && (E2_DIR_PIN > -1) + SET_OUTPUT(E2_DIR_PIN); + #endif + + //Initialize Enable Pins - steppers default to disabled. + + #if (X_ENABLE_PIN > -1) + SET_OUTPUT(X_ENABLE_PIN); + if(!X_ENABLE_ON) WRITE(X_ENABLE_PIN,HIGH); + #endif + #if (Y_ENABLE_PIN > -1) + SET_OUTPUT(Y_ENABLE_PIN); + if(!Y_ENABLE_ON) WRITE(Y_ENABLE_PIN,HIGH); + #endif + #if (Z_ENABLE_PIN > -1) + SET_OUTPUT(Z_ENABLE_PIN); + if(!Z_ENABLE_ON) WRITE(Z_ENABLE_PIN,HIGH); + + #if defined(Z_DUAL_STEPPER_DRIVERS) && (Z2_ENABLE_PIN > -1) + SET_OUTPUT(Z2_ENABLE_PIN); + if(!Z_ENABLE_ON) WRITE(Z2_ENABLE_PIN,HIGH); + #endif + #endif + #if (E0_ENABLE_PIN > -1) + SET_OUTPUT(E0_ENABLE_PIN); + if(!E_ENABLE_ON) WRITE(E0_ENABLE_PIN,HIGH); + #endif + #if defined(E1_ENABLE_PIN) && (E1_ENABLE_PIN > -1) + SET_OUTPUT(E1_ENABLE_PIN); + if(!E_ENABLE_ON) WRITE(E1_ENABLE_PIN,HIGH); + #endif + #if defined(E2_ENABLE_PIN) && (E2_ENABLE_PIN > -1) + SET_OUTPUT(E2_ENABLE_PIN); + if(!E_ENABLE_ON) WRITE(E2_ENABLE_PIN,HIGH); + #endif + + //endstops and pullups + + #if X_MIN_PIN > -1 + SET_INPUT(X_MIN_PIN); + #ifdef ENDSTOPPULLUP_XMIN + WRITE(X_MIN_PIN,HIGH); + #endif + #endif + + #if Y_MIN_PIN > -1 + SET_INPUT(Y_MIN_PIN); + #ifdef ENDSTOPPULLUP_YMIN + WRITE(Y_MIN_PIN,HIGH); + #endif + #endif + + #if Z_MIN_PIN > -1 + SET_INPUT(Z_MIN_PIN); + #ifdef ENDSTOPPULLUP_ZMIN + WRITE(Z_MIN_PIN,HIGH); + #endif + #endif + + #if X_MAX_PIN > -1 + SET_INPUT(X_MAX_PIN); + #ifdef ENDSTOPPULLUP_XMAX + WRITE(X_MAX_PIN,HIGH); + #endif + #endif + + #if Y_MAX_PIN > -1 + SET_INPUT(Y_MAX_PIN); + #ifdef ENDSTOPPULLUP_YMAX + WRITE(Y_MAX_PIN,HIGH); + #endif + #endif + + #if Z_MAX_PIN > -1 + SET_INPUT(Z_MAX_PIN); + #ifdef ENDSTOPPULLUP_ZMAX + WRITE(Z_MAX_PIN,HIGH); + #endif + #endif + + + //Initialize Step Pins + #if (X_STEP_PIN > -1) + SET_OUTPUT(X_STEP_PIN); + WRITE(X_STEP_PIN,INVERT_X_STEP_PIN); + if(!X_ENABLE_ON) WRITE(X_ENABLE_PIN,HIGH); + #endif + #if (Y_STEP_PIN > -1) + SET_OUTPUT(Y_STEP_PIN); + WRITE(Y_STEP_PIN,INVERT_Y_STEP_PIN); + if(!Y_ENABLE_ON) WRITE(Y_ENABLE_PIN,HIGH); + #endif + #if (Z_STEP_PIN > -1) + SET_OUTPUT(Z_STEP_PIN); + WRITE(Z_STEP_PIN,INVERT_Z_STEP_PIN); + if(!Z_ENABLE_ON) WRITE(Z_ENABLE_PIN,HIGH); + + #if defined(Z_DUAL_STEPPER_DRIVERS) && (Z2_STEP_PIN > -1) + SET_OUTPUT(Z2_STEP_PIN); + WRITE(Z2_STEP_PIN,INVERT_Z_STEP_PIN); + if(!Z_ENABLE_ON) WRITE(Z2_ENABLE_PIN,HIGH); + #endif + #endif + #if (E0_STEP_PIN > -1) + SET_OUTPUT(E0_STEP_PIN); + WRITE(E0_STEP_PIN,INVERT_E_STEP_PIN); + if(!E_ENABLE_ON) WRITE(E0_ENABLE_PIN,HIGH); + #endif + #if defined(E1_STEP_PIN) && (E1_STEP_PIN > -1) + SET_OUTPUT(E1_STEP_PIN); + WRITE(E1_STEP_PIN,INVERT_E_STEP_PIN); + if(!E_ENABLE_ON) WRITE(E1_ENABLE_PIN,HIGH); + #endif + #if defined(E2_STEP_PIN) && (E2_STEP_PIN > -1) + SET_OUTPUT(E2_STEP_PIN); + WRITE(E2_STEP_PIN,INVERT_E_STEP_PIN); + if(!E_ENABLE_ON) WRITE(E2_ENABLE_PIN,HIGH); + #endif + + #ifdef CONTROLLERFAN_PIN + SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan + #endif + + // waveform generation = 0100 = CTC + TCCR1B &= ~(1<. +*/ + +#ifndef stepper_h +#define stepper_h + +#include "planner.h" + +#if EXTRUDERS > 2 + #define WRITE_E_STEP(v) { if(current_block->active_extruder == 2) { WRITE(E2_STEP_PIN, v); } else { if(current_block->active_extruder == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}} + #define NORM_E_DIR() { if(current_block->active_extruder == 2) { WRITE(!E2_DIR_PIN, INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(!E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}} + #define REV_E_DIR() { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}} +#elif EXTRUDERS > 1 + #define WRITE_E_STEP(v) { if(current_block->active_extruder == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }} + #define NORM_E_DIR() { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }} + #define REV_E_DIR() { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }} +#else + #define WRITE_E_STEP(v) WRITE(E0_STEP_PIN, v) + #define NORM_E_DIR() WRITE(E0_DIR_PIN, !INVERT_E0_DIR) + #define REV_E_DIR() WRITE(E0_DIR_PIN, INVERT_E0_DIR) +#endif + + +// Initialize and start the stepper motor subsystem +void st_init(); + +// Block until all buffered steps are executed +void st_synchronize(); + +// Set current position in steps +void st_set_position(const long &x, const long &y, const long &z, const long &e); +void st_set_e_position(const long &e); + +// Get current position in steps +long st_get_position(uint8_t axis); + +// The stepper subsystem goes to sleep when it runs out of things to execute. Call this +// to notify the subsystem that it is time to go to work. +void st_wake_up(); + + +void checkHitEndstops(); //call from somwhere to create an serial error message with the locations the endstops where hit, in case they were triggered +void endstops_hit_on_purpose(); //avoid creation of the message, i.e. after homeing and before a routine call of checkHitEndstops(); + +void enable_endstops(bool check); // Enable/disable endstop checking + +void checkStepperErrors(); //Print errors detected by the stepper + +void finishAndDisableSteppers(); + +extern block_t *current_block; // A pointer to the block currently being traced + +void quickStop(); +#endif diff --git a/Marlin/Marlin/temperature.cpp b/Marlin/Marlin/temperature.cpp new file mode 100644 index 0000000000..7307b24aa8 --- /dev/null +++ b/Marlin/Marlin/temperature.cpp @@ -0,0 +1,1019 @@ +/* + temperature.c - temperature control + Part of Marlin + + Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + */ + +/* + This firmware is a mashup between Sprinter and grbl. + (https://github.com/kliment/Sprinter) + (https://github.com/simen/grbl/tree) + + It has preliminary support for Matthew Roberts advance algorithm + http://reprap.org/pipermail/reprap-dev/2011-May/003323.html + + */ + + +#include "Marlin.h" +#include "ultralcd.h" +#include "temperature.h" +#include "watchdog.h" + +//=========================================================================== +//=============================public variables============================ +//=========================================================================== +int target_raw[EXTRUDERS] = { 0 }; +int target_raw_bed = 0; +#ifdef BED_LIMIT_SWITCHING +int target_bed_low_temp =0; +int target_bed_high_temp =0; +#endif +int current_raw[EXTRUDERS] = { 0 }; +int current_raw_bed = 0; + +#ifdef PIDTEMP + // used external + float pid_setpoint[EXTRUDERS] = { 0.0 }; + + float Kp=DEFAULT_Kp; + float Ki=(DEFAULT_Ki*PID_dT); + float Kd=(DEFAULT_Kd/PID_dT); + #ifdef PID_ADD_EXTRUSION_RATE + float Kc=DEFAULT_Kc; + #endif +#endif //PIDTEMP + + +//=========================================================================== +//=============================private variables============================ +//=========================================================================== +static volatile bool temp_meas_ready = false; + +static unsigned long previous_millis_bed_heater; +//static unsigned long previous_millis_heater; + +#ifdef PIDTEMP + //static cannot be external: + static float temp_iState[EXTRUDERS] = { 0 }; + static float temp_dState[EXTRUDERS] = { 0 }; + static float pTerm[EXTRUDERS]; + static float iTerm[EXTRUDERS]; + static float dTerm[EXTRUDERS]; + //int output; + static float pid_error[EXTRUDERS]; + static float temp_iState_min[EXTRUDERS]; + static float temp_iState_max[EXTRUDERS]; + // static float pid_input[EXTRUDERS]; + // static float pid_output[EXTRUDERS]; + static bool pid_reset[EXTRUDERS]; +#endif //PIDTEMP + static unsigned char soft_pwm[EXTRUDERS]; + +#ifdef WATCHPERIOD + int watch_raw[EXTRUDERS] = { -1000 }; // the first value used for all + int watch_oldtemp[3] = {0,0,0}; + unsigned long watchmillis = 0; +#endif //WATCHPERIOD + +// Init min and max temp with extreme values to prevent false errors during startup + static int minttemp[EXTRUDERS] = { 0 }; + static int maxttemp[EXTRUDERS] = { 16383 }; // the first value used for all + static int bed_minttemp = 0; + static int bed_maxttemp = 16383; + static void *heater_ttbl_map[EXTRUDERS] = { (void *)heater_0_temptable +#if EXTRUDERS > 1 + , (void *)heater_1_temptable +#endif +#if EXTRUDERS > 2 + , (void *)heater_2_temptable +#endif +#if EXTRUDERS > 3 + #error Unsupported number of extruders +#endif + }; + static int heater_ttbllen_map[EXTRUDERS] = { heater_0_temptable_len +#if EXTRUDERS > 1 + , heater_1_temptable_len +#endif +#if EXTRUDERS > 2 + , heater_2_temptable_len +#endif +#if EXTRUDERS > 3 + #error Unsupported number of extruders +#endif + }; + +//=========================================================================== +//============================= functions ============================ +//=========================================================================== + +void PID_autotune(float temp) +{ + float input; + int cycles=0; + bool heating = true; + + unsigned long temp_millis = millis(); + unsigned long t1=temp_millis; + unsigned long t2=temp_millis; + long t_high; + long t_low; + + long bias=PID_MAX/2; + long d = PID_MAX/2; + float Ku, Tu; + float Kp, Ki, Kd; + float max, min; + + SERIAL_ECHOLN("PID Autotune start"); + + disable_heater(); // switch off all heaters. + + soft_pwm[0] = PID_MAX/2; + + for(;;) { + + if(temp_meas_ready == true) { // temp sample ready + CRITICAL_SECTION_START; + temp_meas_ready = false; + CRITICAL_SECTION_END; + input = analog2temp(current_raw[0], 0); + + max=max(max,input); + min=min(min,input); + if(heating == true && input > temp) { + if(millis() - t2 > 5000) { + heating=false; + soft_pwm[0] = (bias - d) >> 1; + t1=millis(); + t_high=t1 - t2; + max=temp; + } + } + if(heating == false && input < temp) { + if(millis() - t1 > 5000) { + heating=true; + t2=millis(); + t_low=t2 - t1; + if(cycles > 0) { + bias += (d*(t_high - t_low))/(t_low + t_high); + bias = constrain(bias, 20 ,PID_MAX-20); + if(bias > PID_MAX/2) d = PID_MAX - 1 - bias; + else d = bias; + + SERIAL_PROTOCOLPGM(" bias: "); SERIAL_PROTOCOL(bias); + SERIAL_PROTOCOLPGM(" d: "); SERIAL_PROTOCOL(d); + SERIAL_PROTOCOLPGM(" min: "); SERIAL_PROTOCOL(min); + SERIAL_PROTOCOLPGM(" max: "); SERIAL_PROTOCOLLN(max); + if(cycles > 2) { + Ku = (4.0*d)/(3.14159*(max-min)/2.0); + Tu = ((float)(t_low + t_high)/1000.0); + SERIAL_PROTOCOLPGM(" Ku: "); SERIAL_PROTOCOL(Ku); + SERIAL_PROTOCOLPGM(" Tu: "); SERIAL_PROTOCOLLN(Tu); + Kp = 0.6*Ku; + Ki = 2*Kp/Tu; + Kd = Kp*Tu/8; + SERIAL_PROTOCOLLNPGM(" Clasic PID ") + SERIAL_PROTOCOLPGM(" Kp: "); SERIAL_PROTOCOLLN(Kp); + SERIAL_PROTOCOLPGM(" Ki: "); SERIAL_PROTOCOLLN(Ki); + SERIAL_PROTOCOLPGM(" Kd: "); SERIAL_PROTOCOLLN(Kd); + /* + Kp = 0.33*Ku; + Ki = Kp/Tu; + Kd = Kp*Tu/3; + SERIAL_PROTOCOLLNPGM(" Some overshoot ") + SERIAL_PROTOCOLPGM(" Kp: "); SERIAL_PROTOCOLLN(Kp); + SERIAL_PROTOCOLPGM(" Ki: "); SERIAL_PROTOCOLLN(Ki); + SERIAL_PROTOCOLPGM(" Kd: "); SERIAL_PROTOCOLLN(Kd); + Kp = 0.2*Ku; + Ki = 2*Kp/Tu; + Kd = Kp*Tu/3; + SERIAL_PROTOCOLLNPGM(" No overshoot ") + SERIAL_PROTOCOLPGM(" Kp: "); SERIAL_PROTOCOLLN(Kp); + SERIAL_PROTOCOLPGM(" Ki: "); SERIAL_PROTOCOLLN(Ki); + SERIAL_PROTOCOLPGM(" Kd: "); SERIAL_PROTOCOLLN(Kd); + */ + } + } + soft_pwm[0] = (bias + d) >> 1; + cycles++; + min=temp; + } + } + } + if(input > (temp + 20)) { + SERIAL_PROTOCOLLNPGM("PID Autotune failed! Temperature to high"); + return; + } + if(millis() - temp_millis > 2000) { + temp_millis = millis(); + SERIAL_PROTOCOLPGM("ok T:"); + SERIAL_PROTOCOL(degHotend(0)); + SERIAL_PROTOCOLPGM(" @:"); + SERIAL_PROTOCOLLN(getHeaterPower(0)); + } + if(((millis() - t1) + (millis() - t2)) > (10L*60L*1000L*2L)) { + SERIAL_PROTOCOLLNPGM("PID Autotune failed! timeout"); + return; + } + if(cycles > 5) { + SERIAL_PROTOCOLLNPGM("PID Autotune finished ! Place the Kp, Ki and Kd constants in the configuration.h"); + return; + } + LCD_STATUS; + } +} + +void updatePID() +{ +#ifdef PIDTEMP + for(int e = 0; e < EXTRUDERS; e++) { + temp_iState_max[e] = PID_INTEGRAL_DRIVE_MAX / Ki; + } +#endif +} + +int getHeaterPower(int heater) { + return soft_pwm[heater]; +} + +void manage_heater() +{ +#ifdef HEATER_BED_DUTY_CYCLE_DIVIDER + static int bed_needs_heating=0; + static int bed_is_on=0; +#endif + + #ifdef USE_WATCHDOG + wd_reset(); + #endif + + float pid_input; + float pid_output; + + if(temp_meas_ready != true) //better readability + return; + + CRITICAL_SECTION_START; + temp_meas_ready = false; + CRITICAL_SECTION_END; + + for(int e = 0; e < EXTRUDERS; e++) + { + + #ifdef PIDTEMP + pid_input = analog2temp(current_raw[e], e); + + #ifndef PID_OPENLOOP + pid_error[e] = pid_setpoint[e] - pid_input; + if(pid_error[e] > 10) { + pid_output = PID_MAX; + pid_reset[e] = true; + } + else if(pid_error[e] < -10) { + pid_output = 0; + pid_reset[e] = true; + } + else { + if(pid_reset[e] == true) { + temp_iState[e] = 0.0; + pid_reset[e] = false; + } + pTerm[e] = Kp * pid_error[e]; + temp_iState[e] += pid_error[e]; + temp_iState[e] = constrain(temp_iState[e], temp_iState_min[e], temp_iState_max[e]); + iTerm[e] = Ki * temp_iState[e]; + //K1 defined in Configuration.h in the PID settings + #define K2 (1.0-K1) + dTerm[e] = (Kd * (pid_input - temp_dState[e]))*K2 + (K1 * dTerm[e]); + temp_dState[e] = pid_input; + pid_output = constrain(pTerm[e] + iTerm[e] - dTerm[e], 0, PID_MAX); + } + #endif //PID_OPENLOOP + #ifdef PID_DEBUG + SERIAL_ECHOLN(" PIDDEBUG "< minttemp[e]) && (current_raw[e] < maxttemp[e])) + { + soft_pwm[e] = (int)pid_output >> 1; + } + else { + soft_pwm[e] = 0; + } + } // End extruder for loop + + #ifdef WATCHPERIOD + if(watchmillis && millis() - watchmillis > WATCHPERIOD){ + if(watch_oldtemp[0] >= degHotend(active_extruder)){ + setTargetHotend(0,active_extruder); + LCD_MESSAGEPGM("Heating failed"); + SERIAL_ECHO_START; + SERIAL_ECHOLN("Heating failed"); + }else{ + watchmillis = 0; + } + } + #endif + +#ifdef HEATER_BED_DUTY_CYCLE_DIVIDER + if (bed_needs_heating){ + if (bed_is_on==0) + WRITE(HEATER_BED_PIN,HIGH); + if (bed_is_on==1) + WRITE(HEATER_BED_PIN,LOW); + bed_is_on=(bed_is_on+1) % HEATER_BED_DUTY_CYCLE_DIVIDER; + } +#endif + + if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL) + return; + previous_millis_bed_heater = millis(); + + #if TEMP_BED_PIN > -1 + + #ifdef HEATER_BED_DUTY_CYCLE_DIVIDER + bed_needs_heating=0; + #endif + + #ifndef BED_LIMIT_SWITCHING + // Check if temperature is within the correct range + if((current_raw_bed > bed_minttemp) && (current_raw_bed < bed_maxttemp)) { + if(current_raw_bed >= target_raw_bed) + { + WRITE(HEATER_BED_PIN,LOW); + } + else + { + #ifdef HEATER_BED_DUTY_CYCLE_DIVIDER + bed_needs_heating=1; + #endif + WRITE(HEATER_BED_PIN,HIGH); + } + } + else { + WRITE(HEATER_BED_PIN,LOW); + } + #else //#ifdef BED_LIMIT_SWITCHING + // Check if temperature is within the correct band + if((current_raw_bed > bed_minttemp) && (current_raw_bed < bed_maxttemp)) { + if(current_raw_bed > target_bed_high_temp) + { + WRITE(HEATER_BED_PIN,LOW); + } + else + if(current_raw_bed <= target_bed_low_temp) + { + #ifdef HEATER_BED_DUTY_CYCLE_DIVIDER + bed_needs_heating=1; + #endif + WRITE(HEATER_BED_PIN,HIGH); + } + } + else { + WRITE(HEATER_BED_PIN,LOW); + } + #endif + #endif +} + +#define PGM_RD_W(x) (short)pgm_read_word(&x) +// Takes hot end temperature value as input and returns corresponding raw value. +// For a thermistor, it uses the RepRap thermistor temp table. +// This is needed because PID in hydra firmware hovers around a given analog value, not a temp value. +// This function is derived from inversing the logic from a portion of getTemperature() in FiveD RepRap firmware. +int temp2analog(int celsius, uint8_t e) { + if(e >= EXTRUDERS) + { + SERIAL_ERROR_START; + SERIAL_ERROR((int)e); + SERIAL_ERRORLNPGM(" - Invalid extruder number!"); + kill(); + } + #ifdef HEATER_0_USES_MAX6675 + if (e == 0) + { + return celsius * 4; + } + #endif + if(heater_ttbl_map[e] != 0) + { + int raw = 0; + byte i; + short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]); + + for (i=1; i= EXTRUDERS) + { + SERIAL_ERROR_START; + SERIAL_ERROR((int)e); + SERIAL_ERRORLNPGM(" - Invalid extruder number !"); + kill(); + } + #ifdef HEATER_0_USES_MAX6675 + if (e == 0) + { + return 0.25 * raw; + } + #endif + + if(heater_ttbl_map[e] != 0) + { + float celsius = 0; + byte i; + short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]); + + raw = (1023 * OVERSAMPLENR) - raw; + for (i=1; i raw) + { + celsius = PGM_RD_W((*tt)[i-1][1]) + + (raw - PGM_RD_W((*tt)[i-1][0])) * + (float)(PGM_RD_W((*tt)[i][1]) - PGM_RD_W((*tt)[i-1][1])) / + (float)(PGM_RD_W((*tt)[i][0]) - PGM_RD_W((*tt)[i-1][0])); + break; + } + } + + // Overflow: Set to last value in the table + if (i == heater_ttbllen_map[e]) celsius = PGM_RD_W((*tt)[i-1][1]); + + return celsius; + } + return ((raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR) * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET; +} + +// Derived from RepRap FiveD extruder::getTemperature() +// For bed temperature measurement. +float analog2tempBed(int raw) { + #ifdef BED_USES_THERMISTOR + float celsius = 0; + byte i; + + raw = (1023 * OVERSAMPLENR) - raw; + + for (i=1; i raw) + { + celsius = PGM_RD_W(bedtemptable[i-1][1]) + + (raw - PGM_RD_W(bedtemptable[i-1][0])) * + (float)(PGM_RD_W(bedtemptable[i][1]) - PGM_RD_W(bedtemptable[i-1][1])) / + (float)(PGM_RD_W(bedtemptable[i][0]) - PGM_RD_W(bedtemptable[i-1][0])); + break; + } + } + + // Overflow: Set to last value in the table + if (i == bedtemptable_len) celsius = PGM_RD_W(bedtemptable[i-1][1]); + + return celsius; + #elif defined BED_USES_AD595 + return ((raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR) * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET; + #else + #warning No heater-type defined for the bed. + return 0; + #endif +} + +void tp_init() +{ + // Finish init of mult extruder arrays + for(int e = 0; e < EXTRUDERS; e++) { + // populate with the first value +#ifdef WATCHPERIOD + watch_raw[e] = watch_raw[0]; +#endif + maxttemp[e] = maxttemp[0]; +#ifdef PIDTEMP + temp_iState_min[e] = 0.0; + temp_iState_max[e] = PID_INTEGRAL_DRIVE_MAX / Ki; +#endif //PIDTEMP + } + + #if (HEATER_0_PIN > -1) + SET_OUTPUT(HEATER_0_PIN); + #endif + #if (HEATER_1_PIN > -1) + SET_OUTPUT(HEATER_1_PIN); + #endif + #if (HEATER_2_PIN > -1) + SET_OUTPUT(HEATER_2_PIN); + #endif + #if (HEATER_BED_PIN > -1) + SET_OUTPUT(HEATER_BED_PIN); + #endif + #if (FAN_PIN > -1) + SET_OUTPUT(FAN_PIN); + #ifdef FAST_PWM_FAN + setPwmFrequency(FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 + #endif + #endif + + #ifdef HEATER_0_USES_MAX6675 + #ifndef SDSUPPORT + SET_OUTPUT(MAX_SCK_PIN); + WRITE(MAX_SCK_PIN,0); + + SET_OUTPUT(MAX_MOSI_PIN); + WRITE(MAX_MOSI_PIN,1); + + SET_INPUT(MAX_MISO_PIN); + WRITE(MAX_MISO_PIN,1); + #endif + + SET_OUTPUT(MAX6675_SS); + WRITE(MAX6675_SS,1); + #endif + + // Set analog inputs + ADCSRA = 1< -1) + #if TEMP_0_PIN < 8 + DIDR0 |= 1 << TEMP_0_PIN; + #else + DIDR2 |= 1<<(TEMP_0_PIN - 8); + #endif + #endif + #if (TEMP_1_PIN > -1) + #if TEMP_1_PIN < 8 + DIDR0 |= 1< -1) + #if TEMP_2_PIN < 8 + DIDR0 |= 1 << TEMP_2_PIN; + #else + DIDR2 = 1<<(TEMP_2_PIN - 8); + #endif + #endif + #if (TEMP_BED_PIN > -1) + #if TEMP_BED_PIN < 8 + DIDR0 |= 1< 1) && defined(HEATER_1_MINTEMP) + minttemp[1] = temp2analog(HEATER_1_MINTEMP, 1); +#endif // MINTEMP 1 +#if (EXTRUDERS > 1) && defined(HEATER_1_MAXTEMP) + maxttemp[1] = temp2analog(HEATER_1_MAXTEMP, 1); +#endif //MAXTEMP 1 + +#if (EXTRUDERS > 2) && defined(HEATER_2_MINTEMP) + minttemp[2] = temp2analog(HEATER_2_MINTEMP, 2); +#endif //MINTEMP 2 +#if (EXTRUDERS > 2) && defined(HEATER_2_MAXTEMP) + maxttemp[2] = temp2analog(HEATER_2_MAXTEMP, 2); +#endif //MAXTEMP 2 + +#ifdef BED_MINTEMP + bed_minttemp = temp2analogBed(BED_MINTEMP); +#endif //BED_MINTEMP +#ifdef BED_MAXTEMP + bed_maxttemp = temp2analogBed(BED_MAXTEMP); +#endif //BED_MAXTEMP +} + + + +void setWatch() +{ +#ifdef WATCHPERIOD + int t = 0; + for (int e = 0; e < EXTRUDERS; e++) + { + if(isHeatingHotend(e)) + watch_oldtemp[0] = degHotend(0); + { + t = max(t,millis()); + watch_raw[e] = current_raw[e]; + } + } + watchmillis = t; +#endif +} + + +void disable_heater() +{ + for(int i=0;i -1 + target_raw[0]=0; + soft_pwm[0]=0; + #if HEATER_0_PIN > -1 + WRITE(HEATER_0_PIN,LOW); + #endif + #endif + + #if TEMP_1_PIN > -1 + target_raw[1]=0; + soft_pwm[1]=0; + #if HEATER_1_PIN > -1 + WRITE(HEATER_1_PIN,LOW); + #endif + #endif + + #if TEMP_2_PIN > -1 + target_raw[2]=0; + soft_pwm[2]=0; + #if HEATER_2_PIN > -1 + WRITE(HEATER_2_PIN,LOW); + #endif + #endif + + #if TEMP_BED_PIN > -1 + target_raw_bed=0; + #if HEATER_BED_PIN > -1 + WRITE(HEATER_BED_PIN,LOW); + #endif + #endif +} + +void max_temp_error(uint8_t e) { + disable_heater(); + if(IsStopped() == false) { + SERIAL_ERROR_START; + SERIAL_ERRORLN((int)e); + SERIAL_ERRORLNPGM(": Extruder switched off. MAXTEMP triggered !"); + } +} + +void min_temp_error(uint8_t e) { + disable_heater(); + if(IsStopped() == false) { + SERIAL_ERROR_START; + SERIAL_ERRORLN((int)e); + SERIAL_ERRORLNPGM(": Extruder switched off. MINTEMP triggered !"); + } +} + +void bed_max_temp_error(void) { +#if HEATER_BED_PIN > -1 + WRITE(HEATER_BED_PIN, 0); +#endif + if(IsStopped() == false) { + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM("Temperature heated bed switched off. MAXTEMP triggered !!"); + } +} + +#define HEAT_INTERVAL 250 +#ifdef HEATER_0_USES_MAX6675 +long max6675_previous_millis = -HEAT_INTERVAL; +int max6675_temp = 2000; + +int read_max6675() +{ + if (millis() - max6675_previous_millis < HEAT_INTERVAL) + return max6675_temp; + + max6675_previous_millis = millis(); + max6675_temp = 0; + + #ifdef PRR + PRR &= ~(1<> 3; + } + + return max6675_temp; +} +#endif + + +// Timer 0 is shared with millies +ISR(TIMER0_COMPB_vect) +{ + //these variables are only accesible from the ISR, but static, so they don't loose their value + static unsigned char temp_count = 0; + static unsigned long raw_temp_0_value = 0; + static unsigned long raw_temp_1_value = 0; + static unsigned long raw_temp_2_value = 0; + static unsigned long raw_temp_bed_value = 0; + static unsigned char temp_state = 0; + static unsigned char pwm_count = 1; + static unsigned char soft_pwm_0; + static unsigned char soft_pwm_1; + static unsigned char soft_pwm_2; + + if(pwm_count == 0){ + soft_pwm_0 = soft_pwm[0]; + if(soft_pwm_0 > 0) WRITE(HEATER_0_PIN,1); + #if EXTRUDERS > 1 + soft_pwm_1 = soft_pwm[1]; + if(soft_pwm_1 > 0) WRITE(HEATER_1_PIN,1); + #endif + #if EXTRUDERS > 2 + soft_pwm_2 = soft_pwm[2]; + if(soft_pwm_2 > 0) WRITE(HEATER_2_PIN,1); + #endif + } + if(soft_pwm_0 <= pwm_count) WRITE(HEATER_0_PIN,0); + #if EXTRUDERS > 1 + if(soft_pwm_1 <= pwm_count) WRITE(HEATER_1_PIN,0); + #endif + #if EXTRUDERS > 2 + if(soft_pwm_2 <= pwm_count) WRITE(HEATER_2_PIN,0); + #endif + + pwm_count++; + pwm_count &= 0x7f; + + switch(temp_state) { + case 0: // Prepare TEMP_0 + #if (TEMP_0_PIN > -1) + #if TEMP_0_PIN > 7 + ADCSRB = 1< -1) + raw_temp_0_value += ADC; + #endif + #ifdef HEATER_0_USES_MAX6675 // TODO remove the blocking + raw_temp_0_value = read_max6675(); + #endif + temp_state = 2; + break; + case 2: // Prepare TEMP_BED + #if (TEMP_BED_PIN > -1) + #if TEMP_BED_PIN > 7 + ADCSRB = 1< -1) + raw_temp_bed_value += ADC; + #endif + temp_state = 4; + break; + case 4: // Prepare TEMP_1 + #if (TEMP_1_PIN > -1) + #if TEMP_1_PIN > 7 + ADCSRB = 1< -1) + raw_temp_1_value += ADC; + #endif + temp_state = 6; + break; + case 6: // Prepare TEMP_2 + #if (TEMP_2_PIN > -1) + #if TEMP_2_PIN > 7 + ADCSRB = 1< -1) + raw_temp_2_value += ADC; + #endif + temp_state = 0; + temp_count++; + break; +// default: +// SERIAL_ERROR_START; +// SERIAL_ERRORLNPGM("Temp measurement error!"); +// break; + } + + if(temp_count >= 16) // 8 ms * 16 = 128ms. + { + #if defined(HEATER_0_USES_AD595) || defined(HEATER_0_USES_MAX6675) + current_raw[0] = raw_temp_0_value; + #else + current_raw[0] = 16383 - raw_temp_0_value; + #endif + +#if EXTRUDERS > 1 + #ifdef HEATER_1_USES_AD595 + current_raw[1] = raw_temp_1_value; + #else + current_raw[1] = 16383 - raw_temp_1_value; + #endif +#endif + +#if EXTRUDERS > 2 + #ifdef HEATER_2_USES_AD595 + current_raw[2] = raw_temp_2_value; + #else + current_raw[2] = 16383 - raw_temp_2_value; + #endif +#endif + + #ifdef BED_USES_AD595 + current_raw_bed = raw_temp_bed_value; + #else + current_raw_bed = 16383 - raw_temp_bed_value; + #endif + + temp_meas_ready = true; + temp_count = 0; + raw_temp_0_value = 0; + raw_temp_1_value = 0; + raw_temp_2_value = 0; + raw_temp_bed_value = 0; + + for(unsigned char e = 0; e < EXTRUDERS; e++) { + if(current_raw[e] >= maxttemp[e]) { + target_raw[e] = 0; + max_temp_error(e); + #ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE + { + Stop();; + } + #endif + } + if(current_raw[e] <= minttemp[e]) { + target_raw[e] = 0; + min_temp_error(e); + #ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE + { + Stop(); + } + #endif + } + } + +#if defined(BED_MAXTEMP) && (HEATER_BED_PIN > -1) + if(current_raw_bed >= bed_maxttemp) { + target_raw_bed = 0; + bed_max_temp_error(); + Stop(); + } +#endif + } +} + diff --git a/Marlin/Marlin/temperature.h b/Marlin/Marlin/temperature.h new file mode 100644 index 0000000000..1848c703dd --- /dev/null +++ b/Marlin/Marlin/temperature.h @@ -0,0 +1,169 @@ +/* + temperature.h - temperature controller + Part of Marlin + + Copyright (c) 2011 Erik van der Zalm + + Grbl is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Grbl is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Grbl. If not, see . +*/ + +#ifndef temperature_h +#define temperature_h + +#include "Marlin.h" +#include "planner.h" +#ifdef PID_ADD_EXTRUSION_RATE + #include "stepper.h" +#endif + +// public functions +void tp_init(); //initialise the heating +void manage_heater(); //it is critical that this is called periodically. + +//low leven conversion routines +// do not use this routines and variables outsie of temperature.cpp +int temp2analog(int celsius, uint8_t e); +int temp2analogBed(int celsius); +float analog2temp(int raw, uint8_t e); +float analog2tempBed(int raw); +extern int target_raw[EXTRUDERS]; +extern int heatingtarget_raw[EXTRUDERS]; +extern int current_raw[EXTRUDERS]; +extern int target_raw_bed; +extern int current_raw_bed; +#ifdef BED_LIMIT_SWITCHING + extern int target_bed_low_temp ; + extern int target_bed_high_temp ; +#endif +extern float Kp,Ki,Kd,Kc; + +#ifdef PIDTEMP + extern float pid_setpoint[EXTRUDERS]; +#endif + +// #ifdef WATCHPERIOD + extern int watch_raw[EXTRUDERS] ; +// extern unsigned long watchmillis; +// #endif + + +//high level conversion routines, for use outside of temperature.cpp +//inline so that there is no performance decrease. +//deg=degreeCelsius + +FORCE_INLINE float degHotend(uint8_t extruder) { + return analog2temp(current_raw[extruder], extruder); +}; + +FORCE_INLINE float degBed() { + return analog2tempBed(current_raw_bed); +}; + +FORCE_INLINE float degTargetHotend(uint8_t extruder) { + return analog2temp(target_raw[extruder], extruder); +}; + +FORCE_INLINE float degTargetBed() { + return analog2tempBed(target_raw_bed); +}; + +FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t extruder) { + target_raw[extruder] = temp2analog(celsius, extruder); +#ifdef PIDTEMP + pid_setpoint[extruder] = celsius; +#endif //PIDTEMP +}; + +FORCE_INLINE void setTargetBed(const float &celsius) { + + target_raw_bed = temp2analogBed(celsius); + #ifdef BED_LIMIT_SWITCHING + if(celsius>BED_HYSTERESIS) + { + target_bed_low_temp= temp2analogBed(celsius-BED_HYSTERESIS); + target_bed_high_temp= temp2analogBed(celsius+BED_HYSTERESIS); + } + else + { + target_bed_low_temp=0; + target_bed_high_temp=0; + } + #endif +}; + +FORCE_INLINE bool isHeatingHotend(uint8_t extruder){ + return target_raw[extruder] > current_raw[extruder]; +}; + +FORCE_INLINE bool isHeatingBed() { + return target_raw_bed > current_raw_bed; +}; + +FORCE_INLINE bool isCoolingHotend(uint8_t extruder) { + return target_raw[extruder] < current_raw[extruder]; +}; + +FORCE_INLINE bool isCoolingBed() { + return target_raw_bed < current_raw_bed; +}; + +#define degHotend0() degHotend(0) +#define degTargetHotend0() degTargetHotend(0) +#define setTargetHotend0(_celsius) setTargetHotend((_celsius), 0) +#define isHeatingHotend0() isHeatingHotend(0) +#define isCoolingHotend0() isCoolingHotend(0) +#if EXTRUDERS > 1 +#define degHotend1() degHotend(1) +#define degTargetHotend1() degTargetHotend(1) +#define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1) +#define isHeatingHotend1() isHeatingHotend(1) +#define isCoolingHotend1() isCoolingHotend(1) +#else +#define setTargetHotend1(_celsius) do{}while(0) +#endif +#if EXTRUDERS > 2 +#define degHotend2() degHotend(2) +#define degTargetHotend2() degTargetHotend(2) +#define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2) +#define isHeatingHotend2() isHeatingHotend(2) +#define isCoolingHotend2() isCoolingHotend(2) +#else +#define setTargetHotend2(_celsius) do{}while(0) +#endif +#if EXTRUDERS > 3 +#error Invalid number of extruders +#endif + + + +int getHeaterPower(int heater); +void disable_heater(); +void setWatch(); +void updatePID(); + +FORCE_INLINE void autotempShutdown(){ + #ifdef AUTOTEMP + if(autotemp_enabled) + { + autotemp_enabled=false; + if(degTargetHotend(active_extruder)>autotemp_min) + setTargetHotend(0,active_extruder); + } + #endif +} + +void PID_autotune(float temp); + +#endif + diff --git a/Marlin/Marlin/thermistortables.h b/Marlin/Marlin/thermistortables.h new file mode 100644 index 0000000000..941b2394a5 --- /dev/null +++ b/Marlin/Marlin/thermistortables.h @@ -0,0 +1,507 @@ +#ifndef THERMISTORTABLES_H_ +#define THERMISTORTABLES_H_ + +#include "Marlin.h" + +#define OVERSAMPLENR 16 + +#if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORHEATER_2 == 1) || (THERMISTORBED == 1) //100k bed thermistor + +const short temptable_1[][2] PROGMEM = { +{ 23*OVERSAMPLENR , 300 }, +{ 25*OVERSAMPLENR , 295 }, +{ 27*OVERSAMPLENR , 290 }, +{ 28*OVERSAMPLENR , 285 }, +{ 31*OVERSAMPLENR , 280 }, +{ 33*OVERSAMPLENR , 275 }, +{ 35*OVERSAMPLENR , 270 }, +{ 38*OVERSAMPLENR , 265 }, +{ 41*OVERSAMPLENR , 260 }, +{ 44*OVERSAMPLENR , 255 }, +{ 48*OVERSAMPLENR , 250 }, +{ 52*OVERSAMPLENR , 245 }, +{ 56*OVERSAMPLENR , 240 }, +{ 61*OVERSAMPLENR , 235 }, +{ 66*OVERSAMPLENR , 230 }, +{ 71*OVERSAMPLENR , 225 }, +{ 78*OVERSAMPLENR , 220 }, +{ 84*OVERSAMPLENR , 215 }, +{ 92*OVERSAMPLENR , 210 }, +{ 100*OVERSAMPLENR , 205 }, +{ 109*OVERSAMPLENR , 200 }, +{ 120*OVERSAMPLENR , 195 }, +{ 131*OVERSAMPLENR , 190 }, +{ 143*OVERSAMPLENR , 185 }, +{ 156*OVERSAMPLENR , 180 }, +{ 171*OVERSAMPLENR , 175 }, +{ 187*OVERSAMPLENR , 170 }, +{ 205*OVERSAMPLENR , 165 }, +{ 224*OVERSAMPLENR , 160 }, +{ 245*OVERSAMPLENR , 155 }, +{ 268*OVERSAMPLENR , 150 }, +{ 293*OVERSAMPLENR , 145 }, +{ 320*OVERSAMPLENR , 140 }, +{ 348*OVERSAMPLENR , 135 }, +{ 379*OVERSAMPLENR , 130 }, +{ 411*OVERSAMPLENR , 125 }, +{ 445*OVERSAMPLENR , 120 }, +{ 480*OVERSAMPLENR , 115 }, +{ 516*OVERSAMPLENR , 110 }, +{ 553*OVERSAMPLENR , 105 }, +{ 591*OVERSAMPLENR , 100 }, +{ 628*OVERSAMPLENR , 95 }, +{ 665*OVERSAMPLENR , 90 }, +{ 702*OVERSAMPLENR , 85 }, +{ 737*OVERSAMPLENR , 80 }, +{ 770*OVERSAMPLENR , 75 }, +{ 801*OVERSAMPLENR , 70 }, +{ 830*OVERSAMPLENR , 65 }, +{ 857*OVERSAMPLENR , 60 }, +{ 881*OVERSAMPLENR , 55 }, +{ 903*OVERSAMPLENR , 50 }, +{ 922*OVERSAMPLENR , 45 }, +{ 939*OVERSAMPLENR , 40 }, +{ 954*OVERSAMPLENR , 35 }, +{ 966*OVERSAMPLENR , 30 }, +{ 977*OVERSAMPLENR , 25 }, +{ 985*OVERSAMPLENR , 20 }, +{ 993*OVERSAMPLENR , 15 }, +{ 999*OVERSAMPLENR , 10 }, +{ 1004*OVERSAMPLENR , 5 }, +{ 1008*OVERSAMPLENR , 0 } //safety +}; +#endif +#if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORBED == 2) //200k bed thermistor +const short temptable_2[][2] PROGMEM = { +//200k ATC Semitec 204GT-2 +//Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance + {1*OVERSAMPLENR, 848}, + {30*OVERSAMPLENR, 300}, //top rating 300C + {34*OVERSAMPLENR, 290}, + {39*OVERSAMPLENR, 280}, + {46*OVERSAMPLENR, 270}, + {53*OVERSAMPLENR, 260}, + {63*OVERSAMPLENR, 250}, + {74*OVERSAMPLENR, 240}, + {87*OVERSAMPLENR, 230}, + {104*OVERSAMPLENR, 220}, + {124*OVERSAMPLENR, 210}, + {148*OVERSAMPLENR, 200}, + {176*OVERSAMPLENR, 190}, + {211*OVERSAMPLENR, 180}, + {252*OVERSAMPLENR, 170}, + {301*OVERSAMPLENR, 160}, + {357*OVERSAMPLENR, 150}, + {420*OVERSAMPLENR, 140}, + {489*OVERSAMPLENR, 130}, + {562*OVERSAMPLENR, 120}, + {636*OVERSAMPLENR, 110}, + {708*OVERSAMPLENR, 100}, + {775*OVERSAMPLENR, 90}, + {835*OVERSAMPLENR, 80}, + {884*OVERSAMPLENR, 70}, + {924*OVERSAMPLENR, 60}, + {955*OVERSAMPLENR, 50}, + {977*OVERSAMPLENR, 40}, + {993*OVERSAMPLENR, 30}, + {1004*OVERSAMPLENR, 20}, + {1012*OVERSAMPLENR, 10}, + {1016*OVERSAMPLENR, 0}, +}; + +#endif +#if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORBED == 3) //mendel-parts +const short temptable_3[][2] PROGMEM = { + {1*OVERSAMPLENR,864}, + {21*OVERSAMPLENR,300}, + {25*OVERSAMPLENR,290}, + {29*OVERSAMPLENR,280}, + {33*OVERSAMPLENR,270}, + {39*OVERSAMPLENR,260}, + {46*OVERSAMPLENR,250}, + {54*OVERSAMPLENR,240}, + {64*OVERSAMPLENR,230}, + {75*OVERSAMPLENR,220}, + {90*OVERSAMPLENR,210}, + {107*OVERSAMPLENR,200}, + {128*OVERSAMPLENR,190}, + {154*OVERSAMPLENR,180}, + {184*OVERSAMPLENR,170}, + {221*OVERSAMPLENR,160}, + {265*OVERSAMPLENR,150}, + {316*OVERSAMPLENR,140}, + {375*OVERSAMPLENR,130}, + {441*OVERSAMPLENR,120}, + {513*OVERSAMPLENR,110}, + {588*OVERSAMPLENR,100}, + {734*OVERSAMPLENR,80}, + {856*OVERSAMPLENR,60}, + {938*OVERSAMPLENR,40}, + {986*OVERSAMPLENR,20}, + {1008*OVERSAMPLENR,0}, + {1018*OVERSAMPLENR,-20} + }; + +#endif +#if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORBED == 4) //10k thermistor +const short temptable_4[][2] PROGMEM = { + {1*OVERSAMPLENR, 430}, + {54*OVERSAMPLENR, 137}, + {107*OVERSAMPLENR, 107}, + {160*OVERSAMPLENR, 91}, + {213*OVERSAMPLENR, 80}, + {266*OVERSAMPLENR, 71}, + {319*OVERSAMPLENR, 64}, + {372*OVERSAMPLENR, 57}, + {425*OVERSAMPLENR, 51}, + {478*OVERSAMPLENR, 46}, + {531*OVERSAMPLENR, 41}, + {584*OVERSAMPLENR, 35}, + {637*OVERSAMPLENR, 30}, + {690*OVERSAMPLENR, 25}, + {743*OVERSAMPLENR, 20}, + {796*OVERSAMPLENR, 14}, + {849*OVERSAMPLENR, 7}, + {902*OVERSAMPLENR, 0}, + {955*OVERSAMPLENR, -11}, + {1008*OVERSAMPLENR, -35} +}; +#endif + +#if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2) +const short temptable_5[][2] PROGMEM = { +// ATC Semitec 104GT-2 (Used in ParCan) +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance + {1*OVERSAMPLENR, 713}, + {17*OVERSAMPLENR, 300}, //top rating 300C + {20*OVERSAMPLENR, 290}, + {23*OVERSAMPLENR, 280}, + {27*OVERSAMPLENR, 270}, + {31*OVERSAMPLENR, 260}, + {37*OVERSAMPLENR, 250}, + {43*OVERSAMPLENR, 240}, + {51*OVERSAMPLENR, 230}, + {61*OVERSAMPLENR, 220}, + {73*OVERSAMPLENR, 210}, + {87*OVERSAMPLENR, 200}, + {106*OVERSAMPLENR, 190}, + {128*OVERSAMPLENR, 180}, + {155*OVERSAMPLENR, 170}, + {189*OVERSAMPLENR, 160}, + {230*OVERSAMPLENR, 150}, + {278*OVERSAMPLENR, 140}, + {336*OVERSAMPLENR, 130}, + {402*OVERSAMPLENR, 120}, + {476*OVERSAMPLENR, 110}, + {554*OVERSAMPLENR, 100}, + {635*OVERSAMPLENR, 90}, + {713*OVERSAMPLENR, 80}, + {784*OVERSAMPLENR, 70}, + {846*OVERSAMPLENR, 60}, + {897*OVERSAMPLENR, 50}, + {937*OVERSAMPLENR, 40}, + {966*OVERSAMPLENR, 30}, + {986*OVERSAMPLENR, 20}, + {1000*OVERSAMPLENR, 10}, + {1010*OVERSAMPLENR, 0} +}; +#endif + +#if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor +const short temptable_6[][2] PROGMEM = { + {1*OVERSAMPLENR, 350}, + {28*OVERSAMPLENR, 250}, //top rating 250C + {31*OVERSAMPLENR, 245}, + {35*OVERSAMPLENR, 240}, + {39*OVERSAMPLENR, 235}, + {42*OVERSAMPLENR, 230}, + {44*OVERSAMPLENR, 225}, + {49*OVERSAMPLENR, 220}, + {53*OVERSAMPLENR, 215}, + {62*OVERSAMPLENR, 210}, + {71*OVERSAMPLENR, 205}, //fitted graphically + {78*OVERSAMPLENR, 200}, //fitted graphically + {94*OVERSAMPLENR, 190}, + {102*OVERSAMPLENR, 185}, + {116*OVERSAMPLENR, 170}, + {143*OVERSAMPLENR, 160}, + {183*OVERSAMPLENR, 150}, + {223*OVERSAMPLENR, 140}, + {270*OVERSAMPLENR, 130}, + {318*OVERSAMPLENR, 120}, + {383*OVERSAMPLENR, 110}, + {413*OVERSAMPLENR, 105}, + {439*OVERSAMPLENR, 100}, + {484*OVERSAMPLENR, 95}, + {513*OVERSAMPLENR, 90}, + {607*OVERSAMPLENR, 80}, + {664*OVERSAMPLENR, 70}, + {781*OVERSAMPLENR, 60}, + {810*OVERSAMPLENR, 55}, + {849*OVERSAMPLENR, 50}, + {914*OVERSAMPLENR, 45}, + {914*OVERSAMPLENR, 40}, + {935*OVERSAMPLENR, 35}, + {954*OVERSAMPLENR, 30}, + {970*OVERSAMPLENR, 25}, + {978*OVERSAMPLENR, 22}, + {1008*OVERSAMPLENR, 3} +}; +#endif + +#if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01 +const short temptable_7[][2] PROGMEM = { + {1*OVERSAMPLENR, 500}, + {46*OVERSAMPLENR, 270}, //top rating 300C + {50*OVERSAMPLENR, 265}, + {54*OVERSAMPLENR, 260}, + {58*OVERSAMPLENR, 255}, + {62*OVERSAMPLENR, 250}, + {67*OVERSAMPLENR, 245}, + {72*OVERSAMPLENR, 240}, + {79*OVERSAMPLENR, 235}, + {85*OVERSAMPLENR, 230}, + {91*OVERSAMPLENR, 225}, + {99*OVERSAMPLENR, 220}, + {107*OVERSAMPLENR, 215}, + {116*OVERSAMPLENR, 210}, + {126*OVERSAMPLENR, 205}, + {136*OVERSAMPLENR, 200}, + {149*OVERSAMPLENR, 195}, + {160*OVERSAMPLENR, 190}, + {175*OVERSAMPLENR, 185}, + {191*OVERSAMPLENR, 180}, + {209*OVERSAMPLENR, 175}, + {224*OVERSAMPLENR, 170}, + {246*OVERSAMPLENR, 165}, + {267*OVERSAMPLENR, 160}, + {293*OVERSAMPLENR, 155}, + {316*OVERSAMPLENR, 150}, + {340*OVERSAMPLENR, 145}, + {364*OVERSAMPLENR, 140}, + {396*OVERSAMPLENR, 135}, + {425*OVERSAMPLENR, 130}, + {460*OVERSAMPLENR, 125}, + {489*OVERSAMPLENR, 120}, + {526*OVERSAMPLENR, 115}, + {558*OVERSAMPLENR, 110}, + {591*OVERSAMPLENR, 105}, + {628*OVERSAMPLENR, 100}, + {660*OVERSAMPLENR, 95}, + {696*OVERSAMPLENR, 90}, + {733*OVERSAMPLENR, 85}, + {761*OVERSAMPLENR, 80}, + {794*OVERSAMPLENR, 75}, + {819*OVERSAMPLENR, 70}, + {847*OVERSAMPLENR, 65}, + {870*OVERSAMPLENR, 60}, + {892*OVERSAMPLENR, 55}, + {911*OVERSAMPLENR, 50}, + {929*OVERSAMPLENR, 45}, + {944*OVERSAMPLENR, 40}, + {959*OVERSAMPLENR, 35}, + {971*OVERSAMPLENR, 30}, + {981*OVERSAMPLENR, 25}, + {989*OVERSAMPLENR, 20}, + {994*OVERSAMPLENR, 15}, + {1001*OVERSAMPLENR, 10}, + {1005*OVERSAMPLENR, 5} +}; +#endif + +#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORBED == 51) +// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) +// Verified by linagee. +// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// Advantage: Twice the resolution and better linearity from 150C to 200C +const short temptable_51[][2] PROGMEM = { + {1*OVERSAMPLENR, 350}, + {190*OVERSAMPLENR, 250}, //top rating 250C + {203*OVERSAMPLENR, 245}, + {217*OVERSAMPLENR, 240}, + {232*OVERSAMPLENR, 235}, + {248*OVERSAMPLENR, 230}, + {265*OVERSAMPLENR, 225}, + {283*OVERSAMPLENR, 220}, + {302*OVERSAMPLENR, 215}, + {322*OVERSAMPLENR, 210}, + {344*OVERSAMPLENR, 205}, + {366*OVERSAMPLENR, 200}, + {390*OVERSAMPLENR, 195}, + {415*OVERSAMPLENR, 190}, + {440*OVERSAMPLENR, 185}, + {467*OVERSAMPLENR, 180}, + {494*OVERSAMPLENR, 175}, + {522*OVERSAMPLENR, 170}, + {551*OVERSAMPLENR, 165}, + {580*OVERSAMPLENR, 160}, + {609*OVERSAMPLENR, 155}, + {638*OVERSAMPLENR, 150}, + {666*OVERSAMPLENR, 145}, + {695*OVERSAMPLENR, 140}, + {722*OVERSAMPLENR, 135}, + {749*OVERSAMPLENR, 130}, + {775*OVERSAMPLENR, 125}, + {800*OVERSAMPLENR, 120}, + {823*OVERSAMPLENR, 115}, + {845*OVERSAMPLENR, 110}, + {865*OVERSAMPLENR, 105}, + {884*OVERSAMPLENR, 100}, + {901*OVERSAMPLENR, 95}, + {917*OVERSAMPLENR, 90}, + {932*OVERSAMPLENR, 85}, + {944*OVERSAMPLENR, 80}, + {956*OVERSAMPLENR, 75}, + {966*OVERSAMPLENR, 70}, + {975*OVERSAMPLENR, 65}, + {982*OVERSAMPLENR, 60}, + {989*OVERSAMPLENR, 55}, + {995*OVERSAMPLENR, 50}, + {1000*OVERSAMPLENR, 45}, + {1004*OVERSAMPLENR, 40}, + {1007*OVERSAMPLENR, 35}, + {1010*OVERSAMPLENR, 30}, + {1013*OVERSAMPLENR, 25}, + {1015*OVERSAMPLENR, 20}, + {1017*OVERSAMPLENR, 15}, + {1018*OVERSAMPLENR, 10}, + {1019*OVERSAMPLENR, 5}, + {1020*OVERSAMPLENR, 0}, + {1021*OVERSAMPLENR, -5} +}; +#endif + +#if (THERMISTORHEATER_0 == 52) || (THERMISTORHEATER_1 == 52) || (THERMISTORHEATER_2 == 52) || (THERMISTORBED == 52) +// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// Advantage: More resolution and better linearity from 150C to 200C +const short temptable_52[][2] PROGMEM = { + {1*OVERSAMPLENR, 500}, + {125*OVERSAMPLENR, 300}, //top rating 300C + {142*OVERSAMPLENR, 290}, + {162*OVERSAMPLENR, 280}, + {185*OVERSAMPLENR, 270}, + {211*OVERSAMPLENR, 260}, + {240*OVERSAMPLENR, 250}, + {274*OVERSAMPLENR, 240}, + {312*OVERSAMPLENR, 230}, + {355*OVERSAMPLENR, 220}, + {401*OVERSAMPLENR, 210}, + {452*OVERSAMPLENR, 200}, + {506*OVERSAMPLENR, 190}, + {563*OVERSAMPLENR, 180}, + {620*OVERSAMPLENR, 170}, + {677*OVERSAMPLENR, 160}, + {732*OVERSAMPLENR, 150}, + {783*OVERSAMPLENR, 140}, + {830*OVERSAMPLENR, 130}, + {871*OVERSAMPLENR, 120}, + {906*OVERSAMPLENR, 110}, + {935*OVERSAMPLENR, 100}, + {958*OVERSAMPLENR, 90}, + {976*OVERSAMPLENR, 80}, + {990*OVERSAMPLENR, 70}, + {1000*OVERSAMPLENR, 60}, + {1008*OVERSAMPLENR, 50}, + {1013*OVERSAMPLENR, 40}, + {1017*OVERSAMPLENR, 30}, + {1019*OVERSAMPLENR, 20}, + {1021*OVERSAMPLENR, 10}, + {1022*OVERSAMPLENR, 0} +}; +#endif + +#if (THERMISTORHEATER_0 == 55) || (THERMISTORHEATER_1 == 55) || (THERMISTORHEATER_2 == 55) || (THERMISTORBED == 55) +// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// Advantage: More resolution and better linearity from 150C to 200C +const short temptable_55[][2] PROGMEM = { + {1*OVERSAMPLENR, 500}, + {76*OVERSAMPLENR, 300}, + {87*OVERSAMPLENR, 290}, + {100*OVERSAMPLENR, 280}, + {114*OVERSAMPLENR, 270}, + {131*OVERSAMPLENR, 260}, + {152*OVERSAMPLENR, 250}, + {175*OVERSAMPLENR, 240}, + {202*OVERSAMPLENR, 230}, + {234*OVERSAMPLENR, 220}, + {271*OVERSAMPLENR, 210}, + {312*OVERSAMPLENR, 200}, + {359*OVERSAMPLENR, 190}, + {411*OVERSAMPLENR, 180}, + {467*OVERSAMPLENR, 170}, + {527*OVERSAMPLENR, 160}, + {590*OVERSAMPLENR, 150}, + {652*OVERSAMPLENR, 140}, + {713*OVERSAMPLENR, 130}, + {770*OVERSAMPLENR, 120}, + {822*OVERSAMPLENR, 110}, + {867*OVERSAMPLENR, 100}, + {905*OVERSAMPLENR, 90}, + {936*OVERSAMPLENR, 80}, + {961*OVERSAMPLENR, 70}, + {979*OVERSAMPLENR, 60}, + {993*OVERSAMPLENR, 50}, + {1003*OVERSAMPLENR, 40}, + {1010*OVERSAMPLENR, 30}, + {1015*OVERSAMPLENR, 20}, + {1018*OVERSAMPLENR, 10}, + {1020*OVERSAMPLENR, 0} +}; +#endif + +#define _TT_NAME(_N) temptable_ ## _N +#define TT_NAME(_N) _TT_NAME(_N) + +#ifdef THERMISTORHEATER_0 + #define heater_0_temptable TT_NAME(THERMISTORHEATER_0) + #define heater_0_temptable_len (sizeof(heater_0_temptable)/sizeof(*heater_0_temptable)) +#else +#ifdef HEATER_0_USES_THERMISTOR + #error No heater 0 thermistor table specified +#else // HEATER_0_USES_THERMISTOR + #define heater_0_temptable 0 + #define heater_0_temptable_len 0 +#endif // HEATER_0_USES_THERMISTOR +#endif + +#ifdef THERMISTORHEATER_1 + #define heater_1_temptable TT_NAME(THERMISTORHEATER_1) + #define heater_1_temptable_len (sizeof(heater_1_temptable)/sizeof(*heater_1_temptable)) +#else +#ifdef HEATER_1_USES_THERMISTOR + #error No heater 1 thermistor table specified +#else // HEATER_1_USES_THERMISTOR + #define heater_1_temptable 0 + #define heater_1_temptable_len 0 +#endif // HEATER_1_USES_THERMISTOR +#endif + +#ifdef THERMISTORHEATER_2 + #define heater_2_temptable TT_NAME(THERMISTORHEATER_2) + #define heater_2_temptable_len (sizeof(heater_2_temptable)/sizeof(*heater_2_temptable)) +#else +#ifdef HEATER_2_USES_THERMISTOR + #error No heater 2 thermistor table specified +#else // HEATER_2_USES_THERMISTOR + #define heater_2_temptable 0 + #define heater_2_temptable_len 0 +#endif // HEATER_2_USES_THERMISTOR +#endif + +#ifdef THERMISTORBED + #define bedtemptable TT_NAME(THERMISTORBED) + #define bedtemptable_len (sizeof(bedtemptable)/sizeof(*bedtemptable)) +#else +#ifdef BED_USES_THERMISTOR + #error No bed thermistor table specified +#endif // BED_USES_THERMISTOR +#endif + +#endif //THERMISTORTABLES_H_ + diff --git a/Marlin/Marlin/ultralcd.h b/Marlin/Marlin/ultralcd.h new file mode 100644 index 0000000000..d44c2c3373 --- /dev/null +++ b/Marlin/Marlin/ultralcd.h @@ -0,0 +1,172 @@ +#ifndef ULTRALCD_H +#define ULTRALCD_H +#include "Marlin.h" +#ifdef ULTRA_LCD + #include + void lcd_status(); + void lcd_init(); + void lcd_status(const char* message); + void beep(); + void buttons_init(); + void buttons_check(); + + #define LCD_UPDATE_INTERVAL 100 + #define STATUSTIMEOUT 15000 + extern LiquidCrystal lcd; + extern volatile char buttons; //the last checked buttons in a bit array. + + #ifdef NEWPANEL + #define EN_C (1< -1) + #ifdef SDCARDDETECTINVERTED + #define CARDINSERTED (READ(SDCARDDETECT)!=0) + #else + #define CARDINSERTED (READ(SDCARDDETECT)==0) + #endif + #endif //SDCARDTETECTINVERTED + + #else + + //atomatic, do not change + #define B_LE (1<(LCD_HEIGHT-1+1)*lcdslow) + { + lineoffset++; + curencoderpos=(LCD_HEIGHT-1)*lcdslow; + if(lineoffset>(maxlines+1-LCD_HEIGHT)) + lineoffset=maxlines+1-LCD_HEIGHT; + if(curencoderpos>maxlines*lcdslow) + curencoderpos=maxlines*lcdslow; + } + lastencoderpos=encoderpos=curencoderpos; + activeline=curencoderpos/lcdslow; + if(activeline<0) activeline=0; + if(activeline>LCD_HEIGHT-1) activeline=LCD_HEIGHT-1; + if(activeline>maxlines) + { + activeline=maxlines; + curencoderpos=maxlines*lcdslow; + } + if(lastlineoffset!=lineoffset) + force_lcd_update=true; + lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?'>':'\003'); + } + } + + FORCE_INLINE void clearIfNecessary() + { + if(lastlineoffset!=lineoffset ||force_lcd_update) + { + force_lcd_update=true; + lcd.clear(); + } + } + }; + + //conversion routines, could need some overworking + char *ftostr51(const float &x); + char *ftostr52(const float &x); + char *ftostr31(const float &x); + char *ftostr3(const float &x); + + + #define LCD_INIT lcd_init(); + #define LCD_MESSAGE(x) lcd_status(x); + #define LCD_MESSAGEPGM(x) lcd_statuspgm(MYPGM(x)); + #define LCD_ALERTMESSAGEPGM(x) lcd_alertstatuspgm(MYPGM(x)); + #define LCD_STATUS lcd_status() +#else //no lcd + #define LCD_INIT + #define LCD_STATUS + #define LCD_MESSAGE(x) + #define LCD_MESSAGEPGM(x) + #define LCD_ALERTMESSAGEPGM(x) + FORCE_INLINE void lcd_status() {}; + + #define CLICKED false + #define BLOCK ; +#endif + +void lcd_statuspgm(const char* message); +void lcd_alertstatuspgm(const char* message); + +char *ftostr3(const float &x); +char *itostr2(const uint8_t &x); +char *ftostr31(const float &x); +char *ftostr32(const float &x); +char *itostr31(const int &xx); +char *itostr3(const int &xx); +char *itostr4(const int &xx); +char *ftostr51(const float &x); +#endif //ULTRALCD diff --git a/Marlin/Marlin/ultralcd.pde b/Marlin/Marlin/ultralcd.pde new file mode 100644 index 0000000000..511d47fcf9 --- /dev/null +++ b/Marlin/Marlin/ultralcd.pde @@ -0,0 +1,3023 @@ +#include "language.h" +#include "temperature.h" +#include "ultralcd.h" +#ifdef ULTRA_LCD +#include "Marlin.h" +#include "language.h" +#include "temperature.h" +#include "EEPROMwrite.h" +#include +//=========================================================================== +//=============================imported variables============================ +//=========================================================================== + +extern volatile int feedmultiply; +extern volatile bool feedmultiplychanged; + +extern volatile int extrudemultiply; + +extern long position[4]; +#ifdef SDSUPPORT +#include "cardreader.h" +extern CardReader card; +#endif + +//=========================================================================== +//=============================public variables============================ +//=========================================================================== +volatile char buttons=0; //the last checked buttons in a bit array. +long encoderpos=0; +short lastenc=0; + + +//=========================================================================== +//=============================private variables============================ +//=========================================================================== +static char messagetext[LCD_WIDTH]=""; + +//return for string conversion routines +static char conv[8]; + +LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7 + +static unsigned long previous_millis_lcd=0; +//static long previous_millis_buttons=0; + + +#ifdef NEWPANEL + static long blocking=0; +#else + static long blocking[8]={0,0,0,0,0,0,0,0}; +#endif + +static MainMenu menu; + + +void lcdProgMemprint(const char *str) +{ + char ch=pgm_read_byte(str); + while(ch) + { + lcd.print(ch); + ch=pgm_read_byte(++str); + } +} +#define lcdprintPGM(x) lcdProgMemprint(MYPGM(x)) + + +//=========================================================================== +//=============================functions ============================ +//=========================================================================== + +int intround(const float &x){return int(0.5+x);} + +void lcd_status(const char* message) +{ + strncpy(messagetext,message,LCD_WIDTH); + messagetext[strlen(message)]=0; +} + +void lcd_statuspgm(const char* message) +{ + char ch=pgm_read_byte(message); + char *target=messagetext; + uint8_t cnt=0; + while(ch &&cnt -1) + { + pinMode(BEEPER,OUTPUT); + for(int8_t i=0;i<20;i++){ + WRITE(BEEPER,HIGH); + delay(5); + WRITE(BEEPER,LOW); + delay(5); + } + } + #endif + #endif +} + +void beepshort() +{ + //return; + #ifdef ULTIPANEL + #if (BEEPER > -1) + { + pinMode(BEEPER,OUTPUT); + for(int8_t i=0;i<10;i++){ + WRITE(BEEPER,HIGH); + delay(3); + WRITE(BEEPER,LOW); + delay(3); + } + } + #endif + #endif +} + +void lcd_status() +{ + #ifdef ULTIPANEL + static uint8_t oldbuttons=0; + //static long previous_millis_buttons=0; + //static long previous_lcdinit=0; + // buttons_check(); // Done in temperature interrupt + //previous_millis_buttons=millis(); + long ms=millis(); + for(int8_t i=0; i<8; i++) { + #ifndef NEWPANEL + if((blocking[i]>ms)) + buttons &= ~(1<ms)) + buttons &= ~(1< -1) + { + WRITE(SDCARDDETECT,HIGH); + } + #endif + #else + pinMode(SHIFT_CLK,OUTPUT); + pinMode(SHIFT_LD,OUTPUT); + pinMode(SHIFT_EN,OUTPUT); + pinMode(SHIFT_OUT,INPUT); + WRITE(SHIFT_OUT,HIGH); + WRITE(SHIFT_LD,HIGH); + WRITE(SHIFT_EN,LOW); + #endif +} + + +void buttons_check() +{ + + #ifdef NEWPANEL + uint8_t newbutton=0; + if(READ(BTN_EN1)==0) newbutton|=EN_A; + if(READ(BTN_EN2)==0) newbutton|=EN_B; + if((blocking>1; + if(READ(SHIFT_OUT)) + newbutton|=(1<<7); + WRITE(SHIFT_CLK,HIGH); + WRITE(SHIFT_CLK,LOW); + } + buttons=~newbutton; //invert it, because a pressed switch produces a logical 0 + #endif + + //manage encoder rotation + char enc=0; + if(buttons&EN_A) + enc|=(1<<0); + if(buttons&EN_B) + enc|=(1<<1); + if(enc!=lastenc) + { + switch(enc) + { + case encrot0: + if(lastenc==encrot3) + encoderpos++; + else if(lastenc==encrot1) + encoderpos--; + break; + case encrot1: + if(lastenc==encrot0) + encoderpos++; + else if(lastenc==encrot2) + encoderpos--; + break; + case encrot2: + if(lastenc==encrot1) + encoderpos++; + else if(lastenc==encrot3) + encoderpos--; + break; + case encrot3: + if(lastenc==encrot2) + encoderpos++; + else if(lastenc==encrot0) + encoderpos--; + break; + default: + ; + } + } + lastenc=enc; +} + +#endif + +MainMenu::MainMenu() +{ + status=Main_Status; + displayStartingRow=0; + activeline=0; + force_lcd_update=true; + linechanging=false; + tune=false; +} + +void MainMenu::showStatus() +{ +#if LCD_HEIGHT==4 + static int olddegHotEnd0=-1; + static int oldtargetHotEnd0=-1; + //force_lcd_update=true; + if(force_lcd_update) //initial display of content + { + encoderpos=feedmultiply; + clear(); + lcd.setCursor(0,0);lcdprintPGM("\002---/---\001 "); + #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 + lcd.setCursor(10,0);lcdprintPGM("B---/---\001 "); + #elif EXTRUDERS > 1 + lcd.setCursor(10,0);lcdprintPGM("\002---/---\001 "); + #endif + } + + int tHotEnd0=intround(degHotend0()); + if((tHotEnd0!=olddegHotEnd0)||force_lcd_update) + { + lcd.setCursor(1,0); + lcd.print(ftostr3(tHotEnd0)); + olddegHotEnd0=tHotEnd0; + } + int ttHotEnd0=intround(degTargetHotend0()); + if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update) + { + lcd.setCursor(5,0); + lcd.print(ftostr3(ttHotEnd0)); + oldtargetHotEnd0=ttHotEnd0; + } + #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 + static int oldtBed=-1; + static int oldtargetBed=-1; + int tBed=intround(degBed()); + if((tBed!=oldtBed)||force_lcd_update) + { + lcd.setCursor(11,0); + lcd.print(ftostr3(tBed)); + oldtBed=tBed; + } + int targetBed=intround(degTargetBed()); + if((targetBed!=oldtargetBed)||force_lcd_update) + { + lcd.setCursor(15,0); + lcd.print(ftostr3(targetBed)); + oldtargetBed=targetBed; + } + #elif EXTRUDERS > 1 + static int olddegHotEnd1=-1; + static int oldtargetHotEnd1=-1; + int tHotEnd1=intround(degHotend1()); + if((tHotEnd1!=olddegHotEnd1)||force_lcd_update) + { + lcd.setCursor(11,0); + lcd.print(ftostr3(tHotEnd1)); + olddegHotEnd1=tHotEnd1; + } + int ttHotEnd1=intround(degTargetHotend1()); + if((ttHotEnd1!=oldtargetHotEnd1)||force_lcd_update) + { + lcd.setCursor(15,0); + lcd.print(ftostr3(ttHotEnd1)); + oldtargetHotEnd1=ttHotEnd1; + } + #endif + //starttime=2; + static uint16_t oldtime=0; + if(starttime!=0) + { + lcd.setCursor(0,1); + uint16_t time=millis()/60000-starttime/60000; + + if(starttime!=oldtime) + { + lcd.print(itostr2(time/60));lcdprintPGM("h ");lcd.print(itostr2(time%60));lcdprintPGM("m"); + oldtime=time; + } + } + static int oldzpos=0; + int currentz=current_position[2]*100; + if((currentz!=oldzpos)||force_lcd_update) + { + lcd.setCursor(10,1); + lcdprintPGM("Z:");lcd.print(ftostr52(current_position[2])); + oldzpos=currentz; + } + + static int oldfeedmultiply=0; + int curfeedmultiply=feedmultiply; + + if(feedmultiplychanged == true) { + feedmultiplychanged = false; + encoderpos = curfeedmultiply; + } + + if(encoderpos!=curfeedmultiply||force_lcd_update) + { + curfeedmultiply=encoderpos; + if(curfeedmultiply<10) + curfeedmultiply=10; + if(curfeedmultiply>999) + curfeedmultiply=999; + feedmultiply=curfeedmultiply; + encoderpos=curfeedmultiply; + } + + if((curfeedmultiply!=oldfeedmultiply)||force_lcd_update) + { + oldfeedmultiply=curfeedmultiply; + lcd.setCursor(0,2); + lcd.print(itostr3(curfeedmultiply));lcdprintPGM("% "); + } + + if(messagetext[0]!='\0') + { + lcd.setCursor(0,LCD_HEIGHT-1); + lcd.print(messagetext); + uint8_t n=strlen(messagetext); + for(int8_t i=0;i1)||force_lcd_update) + { + lcd.setCursor(1,0); + lcd.print(ftostr3(tHotEnd0)); + olddegHotEnd0=tHotEnd0; + } + if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update) + { + lcd.setCursor(5,0); + lcd.print(ftostr3(ttHotEnd0)); + oldtargetHotEnd0=ttHotEnd0; + } + + if(messagetext[0]!='\0') + { + lcd.setCursor(0,LCD_HEIGHT-1); + lcd.print(messagetext); + uint8_t n=strlen(messagetext); + for(int8_t i=0;i -1 + FanSpeed = plaPreheatFanSpeed; + analogWrite(FAN_PIN, FanSpeed); + #endif + beepshort(); ); + break; + case ItemP_preheat_abs: + MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(absPreheatHotendTemp);setTargetBed(absPreheatHPBTemp); + #if FAN_PIN > -1 + FanSpeed = absPreheatFanSpeed; + analogWrite(FAN_PIN, FanSpeed); + #endif + beepshort(); ); + break; + case ItemP_cooldown: + MENUITEM( lcdprintPGM(MSG_COOLDOWN) , BLOCK;setTargetHotend0(0);setTargetHotend1(0);setTargetHotend2(0);setTargetBed(0);beepshort(); ) ; + break; +// case ItemP_extrude: + // MENUITEM( lcdprintPGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ; + // break; + case ItemP_move: + MENUITEM( lcdprintPGM(MSG_MOVE_AXIS) , BLOCK;status=Sub_PrepareMove;beepshort(); ); + break; + default: + break; + } + line++; + } + updateActiveLines(ItemP_move,encoderpos); +#endif +} + +enum { + ItemAM_exit, + ItemAM_X, ItemAM_Y, ItemAM_Z, ItemAM_E, ItemAM_ERetract +}; + +void MainMenu::showAxisMove() +{ + uint8_t line=0; + int oldencoderpos=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i0) + { + enquecommand("G1 F700 X0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + + else if (encoderpos < 0) + { + enquecommand("G1 F700 X-0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + lcd.setCursor(11,line);lcd.print(ftostr52(current_position[X_AXIS])); + } + } + break; + case ItemAM_Y: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Y:"); + lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Y_AXIS])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + enquecommand("G91"); + } + else + { + enquecommand("G90"); + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if (encoderpos >0) + { + enquecommand("G1 F700 Y0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + + else if (encoderpos < 0) + { + enquecommand("G1 F700 Y-0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Y_AXIS])); + } + } + break; + case ItemAM_Z: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Z:"); + lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Z_AXIS])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + enquecommand("G91"); + } + else + { + enquecommand("G90"); + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if (encoderpos >0) + { + enquecommand("G1 F70 Z0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + + else if (encoderpos < 0) + { + enquecommand("G1 F70 Z-0.1"); + oldencoderpos=encoderpos; + encoderpos=0; + } + lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Z_AXIS])); + } + } + break; + case ItemAM_E: + // ErikDB: TODO: this length should be changed for volumetric. + MENUITEM( lcdprintPGM(MSG_EXTRUDE) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F70 E1");beepshort(); ) ; + break; + case ItemAM_ERetract: + // ErikDB: TODO: this length should be changed for volumetric. + MENUITEM( lcdprintPGM(MSG_RETRACT) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E-1");beepshort(); ) ; + break; + default: + break; + } + line++; + } + updateActiveLines(ItemAM_ERetract,encoderpos); +} + +enum {ItemT_exit,ItemT_speed,ItemT_flow,ItemT_nozzle, +#if (HEATER_BED_PIN > -1) +ItemT_bed, +#endif +ItemT_fan}; + +void MainMenu::showTune() +{ + uint8_t line=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i400) encoderpos=400; + feedmultiply = encoderpos; + feedmultiplychanged=true; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemT_nozzle: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE); + lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0()))); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(degTargetHotend0()); + } + else + { + setTargetHotend0(encoderpos); + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + #if (HEATER_BED_PIN > -1) + case ItemT_bed: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_BED); + lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed()))); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(degTargetBed()); + } + else + { + setTargetBed(encoderpos); + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + #endif + + + case ItemT_fan: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED); + lcd.setCursor(13,line);lcd.print(ftostr3(FanSpeed)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) //nalogWrite(FAN_PIN, fanpwm); + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=FanSpeed; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>255) encoderpos=255; + FanSpeed=encoderpos; + analogWrite(FAN_PIN, FanSpeed); + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemT_flow://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_FLOW); + lcd.setCursor(13,line);lcd.print(ftostr52(axis_steps_per_unit[E_AXIS])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(axis_steps_per_unit[E_AXIS]*100.0); + } + else + { + float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[E_AXIS]); + position[E_AXIS]=lround(position[E_AXIS]*factor); + //current_position[E_AXIS]*=factor; + axis_steps_per_unit[E_AXIS]= encoderpos/100.0; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>999999) encoderpos=999999; + lcd.setCursor(13,line);lcd.print(ftostr52(encoderpos/100.0)); + } + + }break; + default: + break; + } + line++; + } + updateActiveLines(ItemT_fan,encoderpos); +} + +//does not work +// #define MENUCHANGEITEM(repaint_action, enter_action, accept_action, change_action) \ +// {\ +// if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \ +// if(activeline==line) \ +// { \ +// if(CLICKED) \ +// { \ +// linechanging=!linechanging; \ +// if(linechanging) {enter_action;} \ +// else {accept_action;} \ +// } \ +// else \ +// if(linechanging) {change_action};}\ +// } +// + +enum { + ItemCT_exit,ItemCT_nozzle0, +#ifdef AUTOTEMP + ItemCT_autotempactive, + ItemCT_autotempmin,ItemCT_autotempmax,ItemCT_autotempfact, +#endif +#if EXTRUDERS > 1 + ItemCT_nozzle1, +#endif +#if EXTRUDERS > 2 + ItemCT_nozzle2, +#endif +#if defined BED_USES_THERMISTOR || defined BED_USES_AD595 +ItemCT_bed, +#endif + ItemCT_fan, + ItemCT_PID_P,ItemCT_PID_I,ItemCT_PID_D,ItemCT_PID_C, + ItemCT_PLA_PreHeat_Setting, + ItemCT_ABS_PreHeat_Setting, +}; + +void MainMenu::showControlTemp() +{ + uint8_t line=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + #if EXTRUDERS > 1 + case ItemCT_nozzle1: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE1); + lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend1()))); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(degTargetHotend1()); + } + else + { + setTargetHotend1(encoderpos); + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + #endif + #if EXTRUDERS > 2 + case ItemCT_nozzle2: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE2); + lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend2()))); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(degTargetHotend2()); + } + else + { + setTargetHotend1(encoderpos); + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + #endif + #ifdef AUTOTEMP + case ItemCT_autotempmin: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_MIN); + lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_min)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(autotemp_min); + } + else + { + autotemp_min=encoderpos; + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemCT_autotempmax: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_MAX); + lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_max)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(autotemp_max); + } + else + { + autotemp_max=encoderpos; + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemCT_autotempfact: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_FACTOR); + lcd.setCursor(13,line);lcd.print(ftostr32(autotemp_factor)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(autotemp_factor*100); + } + else + { + autotemp_max=encoderpos; + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>99) encoderpos=99; + lcd.setCursor(13,line);lcd.print(ftostr32(encoderpos/100.)); + } + + }break; + case ItemCT_autotempactive: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_AUTOTEMP); + lcd.setCursor(13,line); + if(autotemp_enabled) + lcdprintPGM(MSG_ON); + else + lcdprintPGM(MSG_OFF); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + autotemp_enabled=!autotemp_enabled; + lcd.setCursor(13,line); + if(autotemp_enabled) + lcdprintPGM(MSG_ON); + else + lcdprintPGM(MSG_OFF); + BLOCK; + } + + }break; + #endif //autotemp + #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 + case ItemCT_bed: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_BED); + lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed()))); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=intround(degTargetBed()); + } + else + { + setTargetBed(encoderpos); + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + #endif + case ItemCT_fan: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED); + lcd.setCursor(13,line);lcd.print(ftostr3(FanSpeed)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) //nalogWrite(FAN_PIN, fanpwm); + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=FanSpeed; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>255) encoderpos=255; + FanSpeed=encoderpos; + analogWrite(FAN_PIN, FanSpeed); + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + #ifdef PIDTEMP + case ItemCT_PID_P: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" PID-P: "); + lcd.setCursor(13,line);lcd.print(itostr4(Kp)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)Kp; + } + else + { + Kp= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>9990) encoderpos=9990; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); + } + + }break; + case ItemCT_PID_I: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_PID_I); + lcd.setCursor(13,line);lcd.print(ftostr51(Ki/PID_dT)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(Ki*10/PID_dT); + } + else + { + Ki= encoderpos/10.*PID_dT; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>9990) encoderpos=9990; + lcd.setCursor(13,line);lcd.print(ftostr51(encoderpos/10.)); + } + + }break; + case ItemCT_PID_D: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_PID_D); + lcd.setCursor(13,line);lcd.print(itostr4(Kd*PID_dT)); + } + + if((activeline!=line) ) + break; + + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(Kd/5./PID_dT); + } + else + { + Kd= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>9990) encoderpos=9990; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos)); + } + + }break; + case ItemCT_PID_C: + #ifdef PID_ADD_EXTRUSION_RATE + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_PID_C); + lcd.setCursor(13,line);lcd.print(itostr3(Kc)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)Kc; + } + else + { + Kc= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + } + #endif + #endif + break; + case ItemCT_PLA_PreHeat_Setting: + MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA_SETTINGS) , BLOCK;status=Sub_PreheatPLASettings;beepshort(); ) ; + break; + case ItemCT_ABS_PreHeat_Setting: + MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS_SETTINGS) , BLOCK;status=Sub_PreheatABSSettings;beepshort(); ) ; + break; + default: + break; + } + line++; + } + + updateActiveLines(ItemCT_ABS_PreHeat_Setting,encoderpos); +} + + +enum { + ItemCM_exit, + ItemCM_acc, ItemCM_xyjerk, + ItemCM_vmaxx, ItemCM_vmaxy, ItemCM_vmaxz, ItemCM_vmaxe, + ItemCM_vtravmin,ItemCM_vmin, + ItemCM_amaxx, ItemCM_amaxy, ItemCM_amaxz, ItemCM_amaxe, + ItemCM_aret, ItemCM_xsteps,ItemCM_ysteps, ItemCM_zsteps, ItemCM_esteps +}; + + + +void MainMenu::showControlMotion() +{ + uint8_t line=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); + } + + }break; + case ItemCM_xyjerk: //max_xy_jerk + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_VXY_JERK); + lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)max_xy_jerk; + } + else + { + max_xy_jerk= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + + case ItemCM_vmaxx: + case ItemCM_vmaxy: + case ItemCM_vmaxz: + case ItemCM_vmaxe: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_VMAX); + if(i==ItemCM_vmaxx)lcdprintPGM(MSG_X); + if(i==ItemCM_vmaxy)lcdprintPGM(MSG_Y); + if(i==ItemCM_vmaxz)lcdprintPGM(MSG_Z); + if(i==ItemCM_vmaxe)lcdprintPGM(MSG_E); + lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemCM_vmaxx])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)max_feedrate[i-ItemCM_vmaxx]; + } + else + { + max_feedrate[i-ItemCM_vmaxx]= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + + case ItemCM_vmin: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_VMIN); + lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(minimumfeedrate); + } + else + { + minimumfeedrate= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + case ItemCM_vtravmin: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_VTRAV_MIN); + lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)mintravelfeedrate; + } + else + { + mintravelfeedrate= encoderpos; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + + }break; + + case ItemCM_amaxx: + case ItemCM_amaxy: + case ItemCM_amaxz: + case ItemCM_amaxe: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(" Amax "); + if(i==ItemCM_amaxx)lcdprintPGM(MSG_X); + if(i==ItemCM_amaxy)lcdprintPGM(MSG_Y); + if(i==ItemCM_amaxz)lcdprintPGM(MSG_Z); + if(i==ItemCM_amaxe)lcdprintPGM(MSG_E); + lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100));lcdprintPGM("00"); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100; + } + else + { + max_acceleration_units_per_sq_second[i-ItemCM_amaxx]= encoderpos*100; + encoderpos=activeline*lcdslow; + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); + } + + }break; + + + case ItemCM_aret://float retract_acceleration = 7000; + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_A_RETRACT); + lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcdprintPGM("00"); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)retract_acceleration/100; + } + else + { + retract_acceleration= encoderpos*100; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<10) encoderpos=10; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); + } + + }break; + case ItemCM_xsteps://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_XSTEPS); + lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[X_AXIS])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(axis_steps_per_unit[X_AXIS]*100.0); + } + else + { + float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[X_AXIS]); + position[X_AXIS]=lround(position[X_AXIS]*factor); + //current_position[X_AXIS]*=factor; + axis_steps_per_unit[X_AXIS]= encoderpos/100.0; + encoderpos=activeline*lcdslow; + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>999999) encoderpos=999999; + lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0)); + } + + }break; + case ItemCM_ysteps://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_YSTEPS); + lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[Y_AXIS])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(axis_steps_per_unit[Y_AXIS]*100.0); + } + else + { + float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[Y_AXIS]); + position[Y_AXIS]=lround(position[Y_AXIS]*factor); + //current_position[Y_AXIS]*=factor; + axis_steps_per_unit[Y_AXIS]= encoderpos/100.0; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>999999) encoderpos=999999; + lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0)); + } + + }break; + case ItemCM_zsteps://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_ZSTEPS); + lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[Z_AXIS])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(axis_steps_per_unit[Z_AXIS]*100.0); + } + else + { + float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[Z_AXIS]); + position[Z_AXIS]=lround(position[Z_AXIS]*factor); + //current_position[Z_AXIS]*=factor; + axis_steps_per_unit[Z_AXIS]= encoderpos/100.0; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>999999) encoderpos=999999; + lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0)); + } + + }break; + + case ItemCM_esteps://axis_steps_per_unit[i] = code_value(); + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_ESTEPS); + lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[E_AXIS])); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(axis_steps_per_unit[E_AXIS]*100.0); + } + else + { + float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[E_AXIS]); + position[E_AXIS]=lround(position[E_AXIS]*factor); + //current_position[E_AXIS]*=factor; + axis_steps_per_unit[E_AXIS]= encoderpos/100.0; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<5) encoderpos=5; + if(encoderpos>999999) encoderpos=999999; + lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0)); + } + + }break; + default: + break; + } + line++; + } + updateActiveLines(ItemCM_esteps,encoderpos); +} + + +enum { + ItemR_exit, + ItemR_autoretract, + ItemR_retract_length,ItemR_retract_feedrate,ItemR_retract_zlift, + ItemR_unretract_length,ItemR_unretract_feedrate, + +}; + + + +void MainMenu::showControlRetract() +{ +#ifdef FWRETRACT + uint8_t line=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(ftostr52(encoderpos/100.)); + } + + }break; + case ItemR_retract_feedrate: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACTF); + lcd.setCursor(13,line);lcd.print(itostr4(retract_feedrate)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(retract_feedrate/5); + } + else + { + retract_feedrate= encoderpos*5.; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos*5)); + } + + }break; + case ItemR_retract_zlift://float retract_acceleration = 7000; + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT_ZLIFT); + lcd.setCursor(13,line);lcd.print(ftostr52(retract_zlift));; + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(retract_zlift*10); + } + else + { + retract_zlift= encoderpos/10.; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(ftostr52(encoderpos/10.)); + } + + }break; + case ItemR_unretract_length: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT_RECOVER); + lcd.setCursor(13,line);lcd.print(ftostr52(retract_recover_length));; + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)(retract_recover_length*100); + } + else + { + retract_recover_length= encoderpos/100.; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(ftostr52(encoderpos/100.)); + } + + }break; + + case ItemR_unretract_feedrate: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT_RECOVERF); + lcd.setCursor(13,line);lcd.print(itostr4(retract_recover_feedrate)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=(long)retract_recover_feedrate/5; + } + else + { + retract_recover_feedrate= encoderpos*5.; + encoderpos=activeline*lcdslow; + + } + BLOCK; + beepshort(); + } + if(linechanging) + { + if(encoderpos<1) encoderpos=1; + if(encoderpos>990) encoderpos=990; + lcd.setCursor(13,line);lcd.print(itostr4(encoderpos*5)); + } + + }break; + + default: + break; + } + line++; + } + updateActiveLines(ItemR_unretract_feedrate,encoderpos); +#endif +} + + + +enum { + ItemC_exit,ItemC_temp,ItemC_move, +#ifdef FWRETRACT + ItemC_rectract, +#endif + ItemC_store, ItemC_load,ItemC_failsafe +}; + +void MainMenu::showControl() +{ + uint8_t line=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i255) encoderpos=255; + plaPreheatFanSpeed=encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + + case ItemPLAPreHeat_set_nozzle: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE); + lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHotendTemp)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=plaPreheatHotendTemp; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + plaPreheatHotendTemp = encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + + case ItemPLAPreHeat_set_HPB: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_BED); + lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHPBTemp)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=plaPreheatHPBTemp; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>250) encoderpos=150; + plaPreheatHPBTemp = encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + case ItemPLAPreHeat_Store_Eprom: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM); + } + if((activeline==line) && CLICKED) + { + //enquecommand("M84"); + beepshort(); + BLOCK; + EEPROM_StoreSettings(); + } + }break; + default: + break; + } + line++; + } + updateActiveLines(ItemPLAPreHeat_Store_Eprom,encoderpos); +#endif +} + +enum { + ItemABSPreHeat_Exit, + ItemABSPreHeat_set_FanSpeed, + ItemABSPreHeat_set_nozzle, + ItemABSPreHeat_set_HPB, + ItemABSPreHeat_Store_Eprom + }; + +void MainMenu::showABSsettings() +{ +#ifdef ULTIPANEL + uint8_t line=0; + clearIfNecessary(); + for(int8_t i=lineoffset;i255) encoderpos=255; + absPreheatFanSpeed=encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + + case ItemABSPreHeat_set_nozzle: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE); + lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHotendTemp)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=absPreheatHotendTemp; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>260) encoderpos=260; + absPreheatHotendTemp = encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + + case ItemABSPreHeat_set_HPB: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_BED); + lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHPBTemp)); + } + + if((activeline!=line) ) + break; + + if(CLICKED) + { + linechanging=!linechanging; + if(linechanging) + { + encoderpos=absPreheatHPBTemp; + } + else + { + encoderpos=activeline*lcdslow; + beepshort(); + } + BLOCK; + } + if(linechanging) + { + if(encoderpos<0) encoderpos=0; + if(encoderpos>250) encoderpos=150; + absPreheatHPBTemp = encoderpos; + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos)); + } + }break; + case ItemABSPreHeat_Store_Eprom: + { + if(force_lcd_update) + { + lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM); + } + if((activeline==line) && CLICKED) + { + //enquecommand("M84"); + beepshort(); + BLOCK; + EEPROM_StoreSettings(); + } + }break; + default: + break; + } + line++; + } + updateActiveLines(ItemABSPreHeat_Store_Eprom,encoderpos); +#endif +} + +//********************************************************************************************************** +// convert float to string with +123.4 format +char *ftostr3(const float &x) +{ + //sprintf(conv,"%5.1f",x); + int xx=x; + conv[0]=(xx/100)%10+'0'; + conv[1]=(xx/10)%10+'0'; + conv[2]=(xx)%10+'0'; + conv[3]=0; + return conv; +} + +char *itostr2(const uint8_t &x) +{ + //sprintf(conv,"%5.1f",x); + int xx=x; + conv[0]=(xx/10)%10+'0'; + conv[1]=(xx)%10+'0'; + conv[2]=0; + return conv; +} + +// convert float to string with +123.4 format +char *ftostr31(const float &x) +{ + int xx=x*10; + conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/1000)%10+'0'; + conv[2]=(xx/100)%10+'0'; + conv[3]=(xx/10)%10+'0'; + conv[4]='.'; + conv[5]=(xx)%10+'0'; + conv[6]=0; + return conv; +} + +char *ftostr32(const float &x) +{ + long xx=x*100; + conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/100)%10+'0'; + conv[2]='.'; + conv[3]=(xx/10)%10+'0'; + conv[4]=(xx)%10+'0'; + conv[6]=0; + return conv; +} + +char *itostr31(const int &xx) +{ + conv[0]=(xx>=0)?'+':'-'; + conv[1]=(xx/1000)%10+'0'; + conv[2]=(xx/100)%10+'0'; + conv[3]=(xx/10)%10+'0'; + conv[4]='.'; + conv[5]=(xx)%10+'0'; + conv[6]=0; + return conv; +} + +char *itostr3(const int &xx) +{ + conv[0]=(xx/100)%10+'0'; + conv[1]=(xx/10)%10+'0'; + conv[2]=(xx)%10+'0'; + conv[3]=0; + return conv; +} + +char *itostr4(const int &xx) +{ + conv[0]=(xx/1000)%10+'0'; + conv[1]=(xx/100)%10+'0'; + conv[2]=(xx/10)%10+'0'; + conv[3]=(xx)%10+'0'; + conv[4]=0; + return conv; +} + +// convert float to string with +1234.5 format +char *ftostr51(const float &x) +{ + long xx=x*10; + conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/10000)%10+'0'; + conv[2]=(xx/1000)%10+'0'; + conv[3]=(xx/100)%10+'0'; + conv[4]=(xx/10)%10+'0'; + conv[5]='.'; + conv[6]=(xx)%10+'0'; + conv[7]=0; + return conv; +} + +// convert float to string with +123.45 format +char *ftostr52(const float &x) +{ + long xx=x*100; + conv[0]=(xx>=0)?'+':'-'; + xx=abs(xx); + conv[1]=(xx/10000)%10+'0'; + conv[2]=(xx/1000)%10+'0'; + conv[3]=(xx/100)%10+'0'; + conv[4]='.'; + conv[5]=(xx/10)%10+'0'; + conv[6]=(xx)%10+'0'; + conv[7]=0; + return conv; +} + +#endif //ULTRA_LCD + + diff --git a/Marlin/Marlin/watchdog.h b/Marlin/Marlin/watchdog.h new file mode 100644 index 0000000000..937379b696 --- /dev/null +++ b/Marlin/Marlin/watchdog.h @@ -0,0 +1,16 @@ +#ifndef WATCHDOG_H +#define WATCHDOG_H +#include "Marlin.h" +#ifdef USE_WATCHDOG + + // intialise watch dog with a 1 sec interrupt time + void wd_init(); + // pad the dog/reset watchdog. MUST be called at least every second after the first wd_init or avr will go into emergency procedures.. + void wd_reset(); + +#else + FORCE_INLINE void wd_init() {}; + FORCE_INLINE void wd_reset() {}; +#endif + +#endif diff --git a/Marlin/Marlin/watchdog.pde b/Marlin/Marlin/watchdog.pde new file mode 100644 index 0000000000..356e374738 --- /dev/null +++ b/Marlin/Marlin/watchdog.pde @@ -0,0 +1,63 @@ +#ifdef USE_WATCHDOG +#include "Marlin.h" +#include "watchdog.h" + +//=========================================================================== +//=============================private variables ============================ +//=========================================================================== + +static volatile uint8_t timeout_seconds=0; + +void(* ctrlaltdelete) (void) = 0; //does not work on my atmega2560 + +//=========================================================================== +//=============================functinos ============================ +//=========================================================================== + + +/// intialise watch dog with a 1 sec interrupt time +void wd_init() +{ + WDTCSR |= (1<1sec +ISR(WDT_vect) +{ + if(timeout_seconds++ >= WATCHDOG_TIMEOUT) + { + + #ifdef RESET_MANUAL + LCD_MESSAGEPGM("Please Reset!"); + LCD_STATUS; + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM("Something is wrong, please turn off the printer."); + #else + LCD_MESSAGEPGM("Timeout, resetting!"); + LCD_STATUS; + #endif + //disable watchdog, it will survife reboot. + WDTCSR |= (1< +#include +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 + +#define true 0x1 +#define false 0x0 + +#define PI 3.1415926535897932384626433832795 +#define HALF_PI 1.5707963267948966192313216916398 +#define TWO_PI 6.283185307179586476925286766559 +#define DEG_TO_RAD 0.017453292519943295769236907684886 +#define RAD_TO_DEG 57.295779513082320876798154814105 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define INTERNAL1V1 2 +#define INTERNAL2V56 3 +#else +#define INTERNAL 3 +#endif +#define DEFAULT 1 +#define EXTERNAL 0 + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#if __AVR_LIBC_VERSION__ < 10701UL +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#endif +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (F_CPU / 1000L) ) +#define microsecondsToClockCycles(a) ( ((a) * (F_CPU / 1000L)) / 1000L ) + +#define lowByte(w) ((uint8_t) ((w) & 0xff)) +#define highByte(w) ((uint8_t) ((w) >> 8)) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + + +typedef unsigned int word; + +#define bit(b) (1UL << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/Marlin/README.md b/Marlin/README.md new file mode 100644 index 0000000000..fb2c18968c --- /dev/null +++ b/Marlin/README.md @@ -0,0 +1,222 @@ +WARNING: +-------- +THIS IS RELEASE CANDIDATE 2 FOR MARLIN 1.0.0 + +The configuration is now split in two files +Configuration.h for the normal settings +Configuration_adv.h for the advanced settings + +Gen7T is not supported. + +Quick Information +=================== +This RepRap firmware is a mashup between Sprinter, grbl and many original parts. + +Derived from Sprinter and Grbl by Erik van der Zalm. +Sprinters lead developers are Kliment and caru. +Grbls lead developer is Simen Svale Skogsrud. Sonney Jeon (Chamnit) improved some parts of grbl +A fork by bkubicek for the Ultimaker was merged, and further development was aided by him. +Some features have been added by: +Lampmaker, Bradley Feldman, and others... + + +Features: + +* Interrupt based movement with real linear acceleration +* High steprate +* Look ahead (Keep the speed high when possible. High cornering speed) +* Interrupt based temperature protection +* preliminary support for Matthew Roberts advance algorithm + For more info see: http://reprap.org/pipermail/reprap-dev/2011-May/003323.html +* Full endstop support +* SD Card support +* SD Card folders (works in pronterface) +* SD Card autostart support +* LCD support (ideally 20x4) +* LCD menu system for autonomous SD card printing, controlled by an click-encoder. +* EEPROM storage of e.g. max-velocity, max-acceleration, and similar variables +* many small but handy things originating from bkubicek's fork. +* Arc support +* Temperature oversampling +* Dynamic Temperature setpointing aka "AutoTemp" +* Support for QTMarlin, a very beta GUI for PID-tuning and velocity-acceleration testing. https://github.com/bkubicek/QTMarlin +* Endstop trigger reporting to the host software. +* Updated sdcardlib +* Heater power reporting. Useful for PID monitoring. +* PID tuning +* CoreXY kinematics (www.corexy.com/theory.html) + +The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments. + + +Differences and additions to the already good Sprinter firmware: +================================================================ + +*Look-ahead:* + +Marlin has look-ahead. While sprinter has to break and re-accelerate at each corner, +lookahead will only decelerate and accelerate to a velocity, +so that the change in vectorial velocity magnitude is less than the xy_jerk_velocity. +This is only possible, if some future moves are already processed, hence the name. +It leads to less over-deposition at corners, especially at flat angles. + +*Arc support:* + +Slic3r can find curves that, although broken into segments, were ment to describe an arc. +Marlin is able to print those arcs. The advantage is the firmware can choose the resolution, +and can perform the arc with nearly constant velocity, resulting in a nice finish. +Also, less serial communication is needed. + +*Temperature Oversampling:* + +To reduce noise and make the PID-differential term more useful, 16 ADC conversion results are averaged. + +*AutoTemp:* + +If your gcode contains a wide spread of extruder velocities, or you realtime change the building speed, the temperature should be changed accordingly. +Usually, higher speed requires higher temperature. +This can now be performed by the AutoTemp function +By calling M109 S T F you enter the autotemp mode. + +You can leave it by calling M109 without any F. +If active, the maximal extruder stepper rate of all buffered moves will be calculated, and named "maxerate" [steps/sec]. +The wanted temperature then will be set to t=tempmin+factor*maxerate, while being limited between tempmin and tempmax. +If the target temperature is set manually or by gcode to a value less then tempmin, it will be kept without change. +Ideally, your gcode can be completely free of temperature controls, apart from a M109 S T F in the start.gcode, and a M109 S0 in the end.gcode. + +*EEPROM:* + +If you know your PID values, the acceleration and max-velocities of your unique machine, you can set them, and finally store them in the EEPROM. +After each reboot, it will magically load them from EEPROM, independent what your Configuration.h says. + +*LCD Menu:* + +If your hardware supports it, you can build yourself a LCD-CardReader+Click+encoder combination. It will enable you to realtime tune temperatures, +accelerations, velocities, flow rates, select and print files from the SD card, preheat, disable the steppers, and do other fancy stuff. +One working hardware is documented here: http://www.thingiverse.com/thing:12663 +Also, with just a 20x4 or 16x2 display, useful data is shown. + +*SD card folders:* + +If you have an SD card reader attached to your controller, also folders work now. Listing the files in pronterface will show "/path/subpath/file.g". +You can write to file in a subfolder by specifying a similar text using small letters in the path. +Also, backup copies of various operating systems are hidden, as well as files not ending with ".g". + +*SD card folders:* + +If you place a file auto[0-9].g into the root of the sd card, it will be automatically executed if you boot the printer. The same file will be executed by selecting "Autostart" from the menu. +First *0 will be performed, than *1 and so on. That way, you can heat up or even print automatically without user interaction. + +*Endstop trigger reporting:* + +If an endstop is hit while moving towards the endstop, the location at which the firmware thinks that the endstop was triggered is outputed on the serial port. +This is useful, because the user gets a warning message. +However, also tools like QTMarlin can use this for finding acceptable combinations of velocity+acceleration. + +*Coding paradigm:* + +Not relevant from a user side, but Marlin was split into thematic junks, and has tried to partially enforced private variables. +This is intended to make it clearer, what interacts which what, and leads to a higher level of modularization. +We think that this is a useful prestep for porting this firmware to e.g. an ARM platform in the future. +A lot of RAM (with enabled LCD ~2200 bytes) was saved by storing char []="some message" in Program memory. +In the serial communication, a #define based level of abstraction was enforced, so that it is clear that +some transfer is information (usually beginning with "echo:"), an error "error:", or just normal protocol, +necessary for backwards compatibility. + +*Interrupt based temperature measurements:* + +An interrupt is used to manage ADC conversions, and enforce checking for critical temperatures. +This leads to less blocking in the heater management routine. + + +Non-standard M-Codes, different to an old version of sprinter: +============================================================== +Movement: + +* G2 - CW ARC +* G3 - CCW ARC + +General: + +* M17 - Enable/Power all stepper motors. Compatibility to ReplicatorG. +* M18 - Disable all stepper motors; same as M84.Compatibility to ReplicatorG. +* M30 - Print time since last M109 or SD card start to serial +* M42 - Change pin status via gcode +* M80 - Turn on Power Supply +* M81 - Turn off Power Supply +* M114 - Output current position to serial port +* M119 - Output Endstop status to serial port + +Movement variables: + +* M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! +* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec +* M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate +* M206 - set home offsets. This sets the X,Y,Z coordinates of the endstops (and is added to the {X,Y,Z}_HOME_POS configuration options (and is also added to the coordinates, if any, provided to G82, as with earlier firmware) +* M220 - set build speed mulitplying S:factor in percent ; aka "realtime tuneing in the gcode". So you can slow down if you have islands in one height-range, and speed up otherwise. +* M221 - set the extrude multiplying S:factor in percent +* M400 - Finish all buffered moves. + +Temperature variables: +* M301 - Set PID parameters P I and D +* M302 - Allow cold extrudes +* M303 - PID relay autotune S sets the target temperature. (default target temperature = 150C) + +Advance: + +* M200 - Set filament diameter for advance +* M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk + +EEPROM: + +* M500 - stores paramters in EEPROM. This parameters are stored: axis_steps_per_unit, max_feedrate, max_acceleration ,acceleration,retract_acceleration, + minimumfeedrate,mintravelfeedrate,minsegmenttime, jerk velocities, PID +* M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +* M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +* M503 - print the current settings (from memory not from eeprom) + +MISC: + +* M240 - Trigger a camera to take a photograph +* M999 - Restart after being stopped by error + +Configuring and compilation: +============================ + +Install the arduino software IDE/toolset v22 + http://www.arduino.cc/en/Main/Software + +For gen6 and sanguinololu the Sanguino directory in the Marlin dir needs to be copied to the arduino environment. + copy Marlin\sanguino \hardware\Sanguino + +Install Ultimaker's RepG 25 build + http://software.ultimaker.com +For SD handling and as better substitute (apart from stl manipulation) download +the very nice Kliment's printrun/pronterface https://github.com/kliment/Printrun + +Copy the Ultimaker Marlin firmware + https://github.com/ErikZalm/Marlin/tree/Marlin_v1 + (Use the download button) + +Start the arduino IDE. +Select Tools -> Board -> Arduino Mega 2560 or your microcontroller +Select the correct serial port in Tools ->Serial Port +Open Marlin.pde + +Click the Verify/Compile button + +Click the Upload button +If all goes well the firmware is uploading + +Start Ultimaker's Custom RepG 25 +Make sure Show Experimental Profiles is enabled in Preferences +Select Sprinter as the Driver + +Press the Connect button. + +KNOWN ISSUES: RepG will display: Unknown: marlin x.y.z + +That's ok. Enjoy Silky Smooth Printing. + + +