zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Add Thermistor 20-21 notes (#19246)

Browse source
This commit is contained in:
Till 2020-11-19 21:07:47 +01:00 committed by GitHub
parent d7aea9608e
commit fcc29fc189
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 6 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
Marlin/Configuration.h
View file

@ -375,8 +375,10 @@
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
* 20 : Pt100 with circuit in the Ultimainboard V2.x with 5v excitation (AVR)
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v excitation (STM32 \ LPC176x....)
* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826 amplifier-board supply voltage.
* NOTES: (1) Must use an ADC input with no pullup. (2) Some INA826 amplifiers are unreliable at 3.3V so consider using sensor 147, 110, or 21.
* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) and 5V INA826 amplifier board supply.
* NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
* 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
* 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
* 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)

3
Marlin/src/module/thermistor/thermistor_21.h
View file

@ -26,7 +26,8 @@
#undef OV_SCALE
#define OV_SCALE(N) (float((N) * 5) / 3.3f)
// Pt100 with INA826 amp with 3.3v excitation based on "Pt100 with INA826 amp on Ultimaker v2.0 electronics"
// Pt100 with INA826 amplifier board with 5v supply based on Thermistor 20, with 3v3 ADC reference on the mainboard.
// If the ADC reference and INA826 board supply voltage are identical, Thermistor 20 instead.
const temp_entry_t temptable_21[] PROGMEM = {
{ OV( 0), 0 },
{ OV(227), 1 },