zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

🔨 Set Longer3D timers in variant (#22632)

Browse source
This commit is contained in:
Tanguy Pruvot 2021-08-27 23:06:45 +02:00 committed by Scott Lahteine
parent 8cadcf6bb6
commit fd594ab176
3 changed files with 9 additions and 8 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/PeripheralPins.c
View file

@ -154,6 +154,7 @@ WEAK const PinMap PinMap_PWM[] = {
{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 3, 0)}, // TIM1_CH3
{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 4, 0)}, // TIM1_CH4
#endif // if 0
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 1, 0)}, // TIM2_CH1 Part Fan
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 1, 0)}, // TIM4_CH1 TFT Backlight
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 2, 0)}, // TIM4_CH2 Servo connector
{NC, NP, 0}

14
buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/variant.h
View file

@ -117,13 +117,13 @@ extern "C" {
#define PIN_WIRE_SCL PB10
// Timer Definitions
// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
#ifndef TIMER_TONE
#define TIMER_TONE TIM6
#endif
#ifndef TIMER_SERVO
#define TIMER_SERVO TIM7
#endif
// Leave TIMER 2 for optional Fan PWM
#define TEMP_TIMER 3
// Leave TIMER 4 for TFT backlight PWM or Servo freq...
#define STEP_TIMER 5
#define TIMER_TONE TIM6
#define TIMER_SERVO TIM7
#define TIMER_SERIAL TIM8
// UART Definitions
// Define here Serial instance number to map on Serial generic name

2
ini/stm32f1.ini
View file

@ -338,7 +338,7 @@ board_build.variant = MARLIN_F103VE_LONGER
board_build.rename = project.bin
board_build.offset = 0x10000
board_upload.offset_address = 0x08010000
build_flags = ${stm32_variant.build_flags} -DMCU_STM32F103VE -DSTEP_TIMER=5 -DU20 -DTS_V12
build_flags = ${stm32_variant.build_flags} -DMCU_STM32F103VE -DU20 -DTS_V12
build_unflags = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC -DHAL_PCD_MODULE_ENABLED
extra_scripts = ${stm32_variant.extra_scripts}
monitor_speed = 250000