zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
2101 commits 1 branch 0 tags 156 MiB
Commit graph

1674 commits

Author SHA1 Message Date
Filip Mulier 62db9848d3 Improvements and bug fixes in sensor delay buffer for filament sensor code 
Improvement to avoid reinitializing delay buffer with every print. Fixed
issues in buffer indexing and memory out of bounds due to floating point
imprecision.  Simplified the code by avoiding conversion to standard
diameter and 1cu mm extrusion, which caused complications in determining
mm extruded.
 2014-08-16 06:50:13 -05:00
Florian Baumann 5908fd5cec Fix reseting CHDK pin to LOW 
chdkActive was set to false regardless of (millis() - chdkHigh) being bigger than the CHDK_DELAY or not. So if (millis() - chdkHigh) wasn't bigger than the delay the first time, the CHDK would never be set back to LOW.

Also, don't return from the function, as there might be other stuff to do, after the CHDK check.
 2014-08-11 14:12:32 +02:00
Roxy-3DPrintBoard 0adbc79571 Fix Default Configuration so Auto Bed Leveling is off 
This snapshot has the Auto Bed Leveling turned off because most Marlin
users do not have that feature.
 2014-08-10 10:18:54 -05:00
Roxy-3DPrintBoard 0091865583 Z_PROBE_REPEATABILITY test 
Z_PROBE_REPEATABILITY test for Auto Bed Leveling.
Implemented as M48 with extra user specified options.
Full support at
http://3dprintboard.com/showthread.php?2802-Auto_Bed_Leveling-Z-Probe-Repeatability-code
 2014-08-09 15:37:23 -05:00
Filip Mulier 85649a4549 Real-time filament diameter measurement and control 
This feature allows the printer to read the filament diameter
automatically and adjust the printer in real time.  Added code to read
an analog voltage that represents a filament diameter measurement.  This
measurement is delayed in a ring buffer to compensate for sensors that
are a distance away from the extruder.  The measurement is used to
adjust the volumetric_multiplier for the extruder.  Some additional g
codes (M404, M405, M406, M407) are used to set parameters and turn
on/off the control. g code M221 is updated.  Pins for RAMPS1.4, RAMBO,
and Printrboard are identified for analog input.  The configuration file
is updated with relevant user parameters.
 2014-08-06 19:30:57 -05:00
Filip Mulier 1d0fe035f3 Change pinMode to SET_INPUT or SET_OUTPUT 
Original code is using WRITE from fastio, but original used pinMode to
set pin direction and did not use the fastio SET_INPUT or SET_OUTPUT.
This caused an issue with the rotary encoder interface to  boards based
on teensyduino, since for teensyduino pin numbers for fastio and the
usual Arduino IO are different.
 2014-08-04 21:44:04 -05:00
Charles Bell e7707aedbc Commented out new #defines in Configuration.h. 2014-08-04 10:18:25 -04:00
Charles Bell 0a8dc0e96b Added documentation to the README.md for the sled Z probe option. CAB 2014-08-04 10:07:43 -04:00
Charles Bell d2fcb3ee56 CAB: Added code for Z-probe with Z endstop mounted on a sled. 2014-08-01 11:29:59 -04:00
Neil Darlow 3cd7dbcc45 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-07-30 13:01:52 +01:00
daid c13a831ea1 Merge pull request #1017 from foosel/fix/checksum_truncation_bug 
Fix for a wrong checksum truncation for certain commands
 2014-07-24 19:41:34 +02:00
Gina Häußge 2d22902d08 Fix for a wrong checksum truncation for certain commands 
Positioning of string terminator to truncate checksum from the commands
M23, M28, M30, M32, M928 and M117 was off by one, causing the last
letter of the actual command to be truncated instead of just the
checksum.

In case of the SD commands this caused checksummed commands targeting
existing files to fail since the last letter of the filename was
truncated.

In case of M117 this caused the last given letter not to be displayed.

This patch fixes the off-by-one error and sets the null terminator
on the exact position of the * starting the checksum instead of the
character before that.
 2014-07-24 12:04:02 +02:00
cocktailyogi ad3b770c1a updated examples 2014-07-20 13:55:13 +02:00
cocktailyogi 2f4a20257c imported last Marlin changes 2014-07-20 13:49:26 +02:00
daid aacff0d361 Merge pull request #948 from Dim3nsioneer/Marlin_v1 
Implementation of FW extruder change retract
 2014-07-18 16:10:15 +02:00
midopple 17aa67e4ea If the option DISABLE_INACTIVE_EXTRUDER ist active the extruder switch to early to inactive because there are some moves in the buffer. So the planner wait 32 moves to disable the unused extruder. 2014-07-13 21:52:32 +02:00
Robert Quattlebaum 1fd9a7d476 Fix for FWRETRACT on DELTA printers. 
Fixes #817
 2014-07-09 09:24:26 -07:00
Neil Darlow 3f2c771d90 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-07-07 18:17:15 +01:00
Grogyan bcd039aa81 Update pins.h 2014-07-05 17:55:03 +12:00
Grogyan 82606354dd Update temperature.cpp 
Enables both SD card and MAX6675 to talk with each other
Fixes also issue #750
 2014-07-05 17:17:17 +12:00
bonm014 32a6451ad8 Add leapfrog and dual Y/Z 
I have added the pin set for the leapfrog and the support of dual Y and Z
 2014-07-03 21:15:03 +02:00
bonm014 b5417be109 Update Configuration.h 
Leapfrog added to the board list
 2014-07-03 21:03:22 +02:00
bonm014 f244045245 Update pins.h 
Leapfrog board added to the pin list
 2014-07-03 21:01:41 +02:00
Pablo Clemente 2242a84218 Changed the declaration of the variable to Marlin_main.cpp to fix issue on commit #965 2014-07-01 16:45:03 +02:00
Neil Darlow 6e3406d228 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-07-01 10:27:39 +01:00
alexborro 43c298a7a9 Add "Thermal Runaway Protection" feature 
This is a feature to protect your printer from burn up in flames if it
has a thermistor coming off place (this happened to a friend of mine
recently and motivated me writing this feature).

The issue: If a thermistor come off, it will read a lower temperature
than actual. The system will turn the heater on forever, burning up the
filament and anything
else around.

After the temperature reaches the target for the first time, this
feature will start measuring for how long the current temperature stays
below the target minus _HYSTERESIS (set_temperature -
THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).

If it stays longer than _PERIOD, it means the thermistor temperature
cannot catch up with the target, so something *may be* wrong. Then, to
be on the safe side, the system will he halt.

Bear in mind the count down will just start AFTER the first time the
thermistor temperature is over the target, so you will have no problem
if your extruder heater takes 2 minutes to hit the target on heating.
 2014-06-30 15:22:49 -03:00
Pablo Clemente d86c3cf43c Changed the type of variable to bool, the name to "cancel_heatup", flags implementation and added this fix to M190 gcode too. 2014-06-30 15:12:13 +02:00
cocktailyogi f0cab611db optimised some math-code 2014-06-24 18:43:36 +02:00
Oskar Linde 269a068032 Fix lcd itostr3() to handle negative numbers 2014-06-24 14:31:15 +02:00
cocktailyogi fae7d08698 fixed wrong compiler-option 2014-06-23 18:16:42 +02:00
cocktailyogi 512f2a3136 restore Branch from Backup 
sorry for that
 2014-06-23 17:09:57 +02:00
Pablo Clemente cd3220d055 Inverted state logic for forced_heating_stop variable 2014-06-13 08:39:58 +02:00
Pablo Clemente 86b4b805d2 Fixed stop print LCD function on M104 2014-06-12 18:43:16 +02:00
Greg Tan 6e6e4e2143 Added thermistor table for the 500C thermistor shipped with the Pico hot end. 2014-06-08 09:35:04 +08:00
Neil Darlow 9d11b70436 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-06-07 20:48:25 +01:00
Gina Häußge 0de826160e M30 response is missing linefeed, "ok" therefore not on own line 
This leads to the command not being acknowledged properly
by the firmware, leading to consecutive issues in host software
waiting for an acknowledgement.
 2014-06-02 17:11:32 +02:00
Dim3nsioneer 3c927901a4 Implementation of FW extruder change retract 
FW retraction is extended onto swap retraction invoked by 'G10 S1'.
Bookkeeping of the retract state of all extruders allows for having one
extruder fw standard retracted while another extruder is swap retracted.
An LCD menu item for the swap retract and recover length was added.
 2014-06-02 17:02:10 +02:00
Dim3nsioneer 8a32c5395b renaming the disable inactive extruder feature 2014-06-02 14:07:02 +02:00
Dim3nsioneer 29e7639933 Add switch unused feeder(s) off 
Having the non-active feeder motors powered on all the time is not
necessary. A feature to deactivate the unused feeder motors has been
implemented. The feature is enabled on default but can be switched off
in the configuration.
 2014-06-02 08:13:09 +02:00
Justin Nesselrotte 07c0eeee99 Fixed a comment in the planner 2014-06-01 19:04:41 -05:00
David Forrest 09b84faa00 Configuration.h, pins.h: Add MOTHERBOARD 84 for Teensy++2.0 2014-05-29 17:19:16 -04:00
neildarlow efb6d61413 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-05-24 13:08:58 +01:00
nothinman 38192cb5f3 Add M112 description to Marlin_main 2014-05-20 15:20:19 +01:00
nothinman aed5ec008a Merge pull request #851 from DanNixon/estop 
Implemented M112
 2014-05-19 17:55:34 +01:00
Erik van der Zalm cfb98ef682 More coverity fixes 2014-05-15 22:09:50 +02:00
zaubara 92e14298b0 Fixes typo for lcd backlighting on I2C PCF8575 
When using LCD_I2C_TYPE_PCF8575T (like Sainsmart I2C), the backlight
won't come on; the incorrect ifdef blocks the evocation of the backlight
functions.
 2014-05-15 01:37:23 +02:00
Erik van der Zalm 9db9842aea Fixed error found by the free coverity tool (https://scan.coverity.com/) 
===================================================
Hi,

Please find the latest report on new defect(s) introduced to ErikZalm/Marlin found with Coverity Scan.

Defect(s) Reported-by: Coverity Scan
Showing 15 of 15 defect(s)

** CID 59629:  Unchecked return value  (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()

** CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()

** CID 59631:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()

** CID 59632:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()

** CID 59633:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 914 in disable_heater()()

** CID 59634:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 913 in disable_heater()()

** CID 59635:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()

** CID 59636:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()

** CID 59637:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()

** CID 59638:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()

** CID 59639:  Out-of-bounds write  (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()

** CID 59640:  Out-of-bounds read  (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()

** CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

** CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

** CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()

________________________________________________________________________________________________________
*** CID 59629:  Unchecked return value  (CHECKED_RETURN)
/Marlin_main.cpp: 2154 in process_commands()()
2148                 }
2149               #endif
2150             }
2151           }
2152           break;
2153         case 85: // M85
   CID 59629:  Unchecked return value  (CHECKED_RETURN)
   Calling "code_seen" without checking return value (as is done elsewhere 66 out of 67 times).
2154           code_seen('S');
2155           max_inactive_time = code_value() * 1000;
2156           break;
2157         case 92: // M92
2158           for(int8_t i=0; i < NUM_AXIS; i++)
2159           {

________________________________________________________________________________________________________
*** CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
/Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Tone.cpp: 319 in tone(unsigned char, unsigned int, unsigned long)()
313         else
314         {
315           // two choices for the 16 bit timers: ck/1 or ck/64
316           ocr = F_CPU / frequency / 2 - 1;
317
318           prescalarbits = 0b001;
   CID 59630:  Operands don't affect result  (CONSTANT_EXPRESSION_RESULT)
   "ocr > 65535U" is always false regardless of the values of its operands. This occurs as the logical operand of if.
319           if (ocr > 0xffff)
320           {
321             ocr = F_CPU / frequency / 2 / 64 - 1;
322             prescalarbits = 0b011;
323           }
324

________________________________________________________________________________________________________
*** CID 59631:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1187 in process_commands()()
1181         case 2: // G2  - CW ARC
1182           if(Stopped == false) {
1183             get_arc_coordinates();
1184             prepare_arc_move(true);
1185             return;
1186           }
   CID 59631:  Missing break in switch  (MISSING_BREAK)
   The above case falls through to this one.
1187         case 3: // G3  - CCW ARC
1188           if(Stopped == false) {
1189             get_arc_coordinates();
1190             prepare_arc_move(false);
1191             return;
1192           }

________________________________________________________________________________________________________
*** CID 59632:  Missing break in switch  (MISSING_BREAK)
/Marlin_main.cpp: 1193 in process_commands()()
1187         case 3: // G3  - CCW ARC
1188           if(Stopped == false) {
1189             get_arc_coordinates();
1190             prepare_arc_move(false);
1191             return;
1192           }
   CID 59632:  Missing break in switch  (MISSING_BREAK)
   The above case falls through to this one.
1193         case 4: // G4 dwell
1194           LCD_MESSAGEPGM(MSG_DWELL);
1195           codenum = 0;
1196           if(code_seen('P')) codenum = code_value(); // milliseconds to wait
1197           if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
1198

________________________________________________________________________________________________________
*** CID 59633:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 914 in disable_heater()()
908          WRITE(HEATER_0_PIN,LOW);
909        #endif
910       #endif
911
912       #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
913         target_temperature[1]=0;
   CID 59633:  Out-of-bounds write  (OVERRUN)
   Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "1".
914         soft_pwm[1]=0;
915         #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916           WRITE(HEATER_1_PIN,LOW);
917         #endif
918       #endif
919

________________________________________________________________________________________________________
*** CID 59634:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 913 in disable_heater()()
907        #if defined(HEATER_0_PIN) && HEATER_0_PIN > -1
908          WRITE(HEATER_0_PIN,LOW);
909        #endif
910       #endif
911
912       #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
   CID 59634:  Out-of-bounds write  (OVERRUN)
   Overrunning array "target_temperature" of 1 2-byte elements at element index 1 (byte offset 2) using index "1".
913         target_temperature[1]=0;
914         soft_pwm[1]=0;
915         #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
916           WRITE(HEATER_1_PIN,LOW);
917         #endif
918       #endif

________________________________________________________________________________________________________
*** CID 59635:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 626 in analog2temp(int, unsigned char)()
620       if(heater_ttbl_map[e] != NULL)
621       {
622         float celsius = 0;
623         uint8_t i;
624         short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625
   CID 59635:  Out-of-bounds read  (OVERRUN)
   Overrunning array "heater_ttbllen_map" of 1 bytes at byte offset 1 using index "e" (which evaluates to 1).
626         for (i=1; i<heater_ttbllen_map[e]; i++)
627         {
628           if (PGM_RD_W((*tt)[i][0]) > raw)
629           {
630             celsius = PGM_RD_W((*tt)[i-1][1]) +
631               (raw - PGM_RD_W((*tt)[i-1][0])) *

________________________________________________________________________________________________________
*** CID 59636:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 620 in analog2temp(int, unsigned char)()
614         if (e == 0)
615         {
616           return 0.25 * raw;
617         }
618       #endif
619
   CID 59636:  Out-of-bounds read  (OVERRUN)
   Overrunning array "heater_ttbl_map" of 1 2-byte elements at element index 1 (byte offset 2) using index "e" (which evaluates to 1).
620       if(heater_ttbl_map[e] != NULL)
621       {
622         float celsius = 0;
623         uint8_t i;
624         short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
625

________________________________________________________________________________________________________
*** CID 59637:  Out-of-bounds write  (OVERRUN)
/temperature.cpp: 202 in PID_autotune(float, int, int)()
196       {
197          soft_pwm_bed = (MAX_BED_POWER)/2;
198          bias = d = (MAX_BED_POWER)/2;
199        }
200        else
201        {
   CID 59637:  Out-of-bounds write  (OVERRUN)
   Overrunning array "soft_pwm" of 1 bytes at byte offset 1 using index "extruder" (which evaluates to 1).
202          soft_pwm[extruder] = (PID_MAX)/2;
203          bias = d = (PID_MAX)/2;
204       }
205
206
207

________________________________________________________________________________________________________
*** CID 59638:  Out-of-bounds read  (OVERRUN)
/temperature.cpp: 214 in PID_autotune(float, int, int)()
208
209      for(;;) {
210
211         if(temp_meas_ready == true) { // temp sample ready
212           updateTemperaturesFromRawValues();
213
   CID 59638:  Out-of-bounds read  (OVERRUN)
   Overrunning array "current_temperature" of 1 4-byte elements at element index 1 (byte offset 4) using index "extruder" (which evaluates to 1).
214           input = (extruder<0)?current_temperature_bed:current_temperature[extruder];
215
216           max=max(max,input);
217           min=min(min,input);
218           if(heating == true && input > temp) {
219             if(millis() - t2 > 5000) {

________________________________________________________________________________________________________
*** CID 59639:  Out-of-bounds write  (OVERRUN)
/Marlin_main.cpp: 2278 in process_commands()()
2272               tmp_extruder = code_value();
2273               if(tmp_extruder >= EXTRUDERS) {
2274                 SERIAL_ECHO_START;
2275                 SERIAL_ECHO(MSG_M200_INVALID_EXTRUDER);
2276               }
2277             }
   CID 59639:  Out-of-bounds write  (OVERRUN)
   Overrunning array "volumetric_multiplier" of 1 4-byte elements at element index 1 (byte offset 4) using index "tmp_extruder" (which evaluates to 1).
2278             volumetric_multiplier[tmp_extruder] = 1 / area;
2279           }
2280           break;
2281         case 201: // M201
2282           for(int8_t i=0; i < NUM_AXIS; i++)
2283           {

________________________________________________________________________________________________________
*** CID 59640:  Out-of-bounds read  (OVERRUN)
/Marlin_main.cpp: 1802 in process_commands()()
1796             int pin_status = code_value();
1797             int pin_number = LED_PIN;
1798             if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
1799               pin_number = code_value();
1800             for(int8_t i = 0; i < (int8_t)sizeof(sensitive_pins); i++)
1801             {
   CID 59640:  Out-of-bounds read  (OVERRUN)
   Overrunning array "sensitive_pins" of 28 2-byte elements at element index 55 (byte offset 110) using index "i" (which evaluates to 55).
1802               if (sensitive_pins[i] == pin_number)
1803               {
1804                 pin_number = -1;
1805                 break;
1806               }
1807             }

________________________________________________________________________________________________________
*** CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 51 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
45     }
46
47     LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
48     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49     {
50       init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
   CID 59641:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
51     }
52
53     void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
54     			 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
55     			 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
56     {

________________________________________________________________________________________________________
*** CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 45 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
39     }
40
41     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
42     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
43     {
44       init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0);
   CID 59642:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
45     }
46
47     LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
48     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
49     {
50       init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);

________________________________________________________________________________________________________
*** CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
/Applications/Arduino.app/Contents/Resources/Java/libraries/LiquidCrystal/LiquidCrystal.cpp: 32 in LiquidCrystal::LiquidCrystal(unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char)()
26
27     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
28     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
29     			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
30     {
31       init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7);
   CID 59643:  Uninitialized scalar field  (UNINIT_CTOR)
   Non-static class member "_initialized" is not initialized in this constructor nor in any functions that it calls.
32     }
33
34     LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
35     			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
36     			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
37     {

________________________________________________________________________________________________________
To view the defects in Coverity Scan visit, http://scan.coverity.com/projects/2224?tab=overview
 2014-05-14 21:59:48 +02:00
Neil Darlow e541323741 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-05-09 15:02:50 +01:00
Alejandro Romero 1c9a70cee9 Support for Gen3 Monolithic electronics 
Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW
TODO: Add support for tipmanager
 2014-05-06 19:24:20 -05:00
daid 2acd3792fc Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2014-05-01 12:03:47 +02:00
daid 8b4c4aa5c3 Add feature to check&retry CRC read errors on SD. 2014-05-01 12:03:41 +02:00
nothinman ce76843dc3 Merge pull request #897 from Makible/5DPrint_D8_Board_Support 
5DPrint D8 Controller Board Support
 2014-04-28 22:11:28 +01:00
Cameron Lai ad5c8cbba9 Add safety limit for hot bed power in example configuration 2014-04-25 17:04:24 +08:00
Cameron Lai 6460709d92 Fix bug in PID Autotune report 2014-04-25 16:05:05 +08:00
Cameron Lai 105bebb466 Fix for pin mapping for SDSS pin and Fan pin, so Arduino library can be used 2014-04-25 12:57:47 +08:00
Cameron Lai 97ead2eccb Fix for microstepping pin mapping, not using Teensy pin mapping, but Arduino's default pin mapping so Arduino library can be used 2014-04-25 12:57:11 +08:00
Cameron Lai d85411f13a Revert "Fix for stepper microstepping" 
This reverts commit eea3ba5588.
 2014-04-25 12:41:56 +08:00
Cameron Lai 7c7f2d094e Revert "Fix for reading microstepping resolution" 
This reverts commit 2715f6ddbf.
 2014-04-25 12:41:48 +08:00
Cameron Lai e2d703377a Enable EEPROM by default for 5DPrint D8 Controller Board in example configuration 2014-04-24 19:15:35 +08:00
Cameron Lai 2715f6ddbf Fix for reading microstepping resolution 2014-04-24 17:48:33 +08:00
Cameron Lai 39e9b133f3 Add example configuration for Makibox printer, which uses the 5DPrint D8 Driver Board 2014-04-24 17:06:07 +08:00
Cameron Lai da6b536182 Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed 2014-04-24 16:49:42 +08:00
Cameron Lai 3a8e36f19e Add Digipot config for 5DPrint D8 Driver Board 2014-04-24 12:56:46 +08:00
Cameron Lai eea3ba5588 Fix for stepper microstepping 2014-04-24 12:56:06 +08:00
Cameron Lai 1cbcbb0971 Add makibox machine information 2014-04-24 12:55:21 +08:00
Cameron Lai 2fa514e88a Add port for 5DPrint D8 Driver board 2014-04-24 12:55:00 +08:00
nothinman b9126ab497 Merge pull request #894 from MyMakibox/Marlin_v1 
Update Marlin_main.cpp
 2014-04-23 16:23:56 +01:00
MyMakibox 21ec6b88c3 Update Marlin_main.cpp 
Added description of autotemp flags to M109
 2014-04-23 17:33:26 +08:00
MyMakibox e4dc80d3d3 Update Configuration_adv.h 
Corrected error in AUTOTEMP instructions
 2014-04-23 17:30:07 +08:00
Neil Darlow 6adbdf42e0 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-21 15:10:57 +01:00
whosawhatsis 27d544ac25 Speed up QUICK_HOME feedrate for diagonal move 
Speed up the diagonal move while still keeping each individual axis at
or below its homing feedrate.
 2014-04-19 17:29:20 -07:00
nothinman 013793bbe9 Merge pull request #878 from koldoartola/Marlin_v1 
Added new language (Basque-Euskera)
 2014-04-13 22:37:39 +01:00
koldo artola e5b70237c7 Added new language (Basque-Euskera) 
Added:
* new language (Basque-Euskera)
* some minor corrections for Spanish
* added 2 new constants for every language (required for a minor change
I am preparing to ultralcd.cpp)
 2014-04-13 22:19:38 +02:00
Nutz95 ed6f4a71c5 fix wrong temptable index 2014-04-13 18:00:55 +02:00
Nutz95 3161740df9 This table is made for thermistor 3950 (can be found on ebay for cheap) 
it's caracteristics are :

R25℃ ;100KΩ±1%

B Value(R25/50℃)：3990K 1%
Dissipation Factor(mW/℃)：1.1~1.6 In still Air
Thermal Time Constant(S)：10~17 In Still Air
Operating temperature range：  (-50~+260°C)
Dimension：  1.8mm Dia X4.1mm
Lead Length  ：30mm

This table was found on the following blogs:
http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/

and

http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
 2014-04-13 17:03:20 +02:00
nothinman 086ff1644f Merge pull request #852 from pixatintes/patch-1 
Update language.h
 2014-04-13 00:46:17 +01:00
nothinman 3ffc9651b1 Merge pull request #845 from DerSchultze/Sanguinololu-servo 
Added servo pin assignments to Sanguinololu
 2014-04-13 00:37:28 +01:00
nothinman 357b87b498 Merge pull request #826 from paciotti/patch-1 
Configuration_adv.h
 2014-04-13 00:22:25 +01:00
neildarlow 95ad6ec9a1 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-12 22:20:45 +01:00
Gabe Rosenhouse 27a7cf9fcf use existing strings 2014-04-07 05:01:48 -05:00
Gabe Rosenhouse d3f305332a Allowable range now includes default value 2014-04-06 19:45:56 -05:00
Gabe Rosenhouse b0aeac117f Adjustable Z probe offset, via custom M-code 2014-04-06 19:45:56 -05:00
Neil Darlow 73b380d8d2 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-06 19:15:29 +01:00
nothinman c23376f2e7 Merge pull request #837 from whosawhatsis/fwretract 
FWRETRACT in mm/s
 2014-04-04 11:47:58 +01:00
nothinman dfb98101e4 Change CONTROLLERFAN_PIN for board 35 to -1, as it would conflict with board's 33 extruder pin, causing burnout (it's the same board, just different number of fans/extruders, therefore should be pin-compatible) 2014-04-03 18:05:48 +01:00
nothinman f1501317ca Merge pull request #860 from drf5n/therm3950 
thermistortables.h: Add comments that table 60 uses beta=3950.
 2014-04-02 18:29:57 +01:00
nothinman 9a5d23d96f Merge pull request #866 from sakunamary/Marlin_v1 
fix bug for dual extruders not working
 2014-04-02 18:27:42 +01:00
nothinman 303ee67896 Merge pull request #864 from whosawhatsis/M200 
fix bug in M200 with multiple extruders
 2014-04-02 18:26:15 +01:00
Tim 8759508319 fix bug for dual extruders not working 
some guy find that marlin not working good for dual extruders delta .
when type T0 or T1 to active extruder and  E0 or E1  move causing XYZ
motion . so i locales the bugs and fix it , I have dry run the fix.
 2014-04-01 09:26:19 +08:00
whosawhatsis a65564eef6 fix bug in M200 with multiple extruders 2014-03-30 11:42:22 -07:00
whosawhatsis aeaf9b9312 fix bug in M200 with multiple extruders 2014-03-30 11:41:57 -07:00
Neil Darlow 89f78b0b80 Allow use of either SD Card slot when LCD Panel is configured. 
Preference is for Controller SD slot before LCD Panel slot when both are occupied.
 2014-03-27 17:02:17 +00:00
David Forrest b0093a1513 thermistortables.h: Add comments that table 60 uses beta=3950. 2014-03-26 23:41:10 -04:00
pixatintes a3530d1141 Update language.h 
Updated to latest version.
 2014-03-23 18:06:48 +01:00
pixatintes 990e770e15 Update language.h 
Added catalan language
 2014-03-23 10:30:08 +01:00
Dan Nixon f643f4d674 Test and refactor 2014-03-21 20:42:00 +00:00
neildarlow bbe8fbe13d Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-03-21 18:27:14 +00:00
Dim3nsioneer c8cdd1fc6f Bugfixes for language option 6 (russian) 2014-03-19 14:27:38 +01:00
Dim3nsioneer 7395dafc1e semantic changes in language.h 2014-03-19 12:30:50 +01:00
Dim3nsioneer fad2a60ce6 Corrections for preheat extension in language.h 2014-03-19 12:23:35 +01:00
Ralf Schultz eecda434fb Sanguinololu servo pins set default disabled 2014-03-18 08:25:20 +01:00
Dim3nsioneer 944ced87c5 Extended Preheat options 
Preheat LCD menus base on code by D-Base
 2014-03-17 18:37:46 +01:00
Ralf Schultz 06709ad60e Added servo pin assignments to Sanguinololu 2014-03-17 15:45:13 +01:00
Dim3nsioneer 3906f27c46 Individual extruder flow rate 
Extension of M221, Tune menu
 2014-03-15 18:09:46 +01:00
Dan Nixon a38c90ee84 Added estop handling 2014-03-15 15:56:15 +00:00
ErikZalm a00cec8b71 Merge pull request #833 from mattsch/optional_feedrate_multiplier 
Add support for disabling encoder control for feedrate multiplier
 2014-03-15 15:41:45 +01:00
neildarlow af8be9013b Merge branch 'lcd_detected' of https://github.com/whosawhatsis/Marlin into Marlin_v1 2014-03-15 07:24:47 +00:00
whosawhatsis 0ddee3c7db Prevent SD card insertion from causing a hang when using LiquidTWI2 device detection 2014-03-14 18:46:25 -07:00
Dan Nixon 272072fa20 Added M112 2014-03-14 23:19:43 +00:00
whosawhatsis aab61e63c3 FWRETRACT in mm/s 
Firmware retraction now stores the retract and recover speeds in mm/s
instead of mm/min. This makes it match the units of the maximum
feedrate, and fixes problems with modifying the value via LCD control
panel. From gcode, the values are still taken in mm/min to match the
units of G1 and similar, and they are converted to mm/s before they are
stored.

I also lowered the default retract feedrate to make it less likely to
cause problems for geared extruders when the user hasn’t bothered to
set a reasonable maximum feedrate, though users should be setting both
of these values to suit their hardware.
 2014-03-14 15:17:28 -07:00
Matthew Schick 6cd85e6008 Add support for disabling encoder control for feedrate multiplier 
Signed-off-by: Matthew Schick <matthew.schick@gmail.com>
 2014-03-12 18:13:50 -04:00
blddk 09af1b90b8 Added CHDK support 
Added CHDK support to take pictures instead of doing an IR command, see more about how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 2014-03-10 21:57:08 +01:00
blddk 765b2da3d4 Added CHDK support 
Added so M240 can be used to trigger CHDK instead of sending an IR signal, see more about CHDK here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
 2014-03-10 21:52:33 +01:00
paciotti 881e348eed Update Configuration_adv.h 
Increase Z_HOME_RETRACT_MM to 2mm default to avoid end stop not switching during retract.
 2014-03-08 22:35:05 +01:00
neildarlow 5a332df47e Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-03-06 20:56:44 +00:00
Tommi Lamberg 15d1b8d719 Fixed finnish translation 
- Fixed Few finnish transalations
- Removed duplicate contrast define
 2014-03-05 14:02:52 +02:00
neildarlow 7325d7102e Activate LiquidTWI2 device detection and space-pad LCD status line. 2014-03-03 21:01:27 +00:00
ErikZalm 7f76a0e064 Merge pull request #813 from drf5n/PID_DEBUG 
temperature.cpp: Fix PID_DEBUG compile error.
 2014-02-26 17:31:48 +01:00
Erik van der Zalm fcd8524b6e Only increase EEPROM version for DELTA printers. 2014-02-26 17:29:27 +01:00
Jim Morris 8ea5665ee2 Merge remote-tracking branch 'origin/Marlin_v1' into add/M665-set-delta-configuration 
Conflicts:
	Marlin/Marlin_main.cpp
 2014-02-26 00:19:28 -08:00
David Forrest 8c4377dd63 temperature.cpp: Fix PID_DEBUG compile error. 2014-02-26 00:44:22 -05:00
ErikZalm fde8c2c310 Merge pull request #807 from Cylindric3D/typofixes_upstream5 
Various typo fixes #5 - only in comments, no code changes.
 2014-02-25 18:49:41 +01:00
Cylindric fdce91192e Various typo fixes - only in comments, no code changes. 2014-02-25 10:01:15 +00:00
Cylindric d819c55395 Various typo fixes - only in comments, no code changes. 2014-02-25 09:52:58 +00:00
ErikZalm fd4542f33a Merge pull request #805 from whosawhatsis/M200 
autretract fix
 2014-02-24 22:35:08 +01:00
ErikZalm e8291ed728 Merge pull request #802 from Makers-Tool-Works/Marlin_v1 
Clarify which PID values to enter
 2014-02-24 22:31:13 +01:00
ErikZalm 465b654d24 Merge pull request #797 from Cylindric3D/update_menu_plan 
Update menu plan
 2014-02-24 22:30:19 +01:00
ErikZalm 88506a80c3 Merge pull request #789 from smiler/Marlin_v1 
Fixed typo.
 2014-02-24 22:26:31 +01:00
ErikZalm b514d3c87f Merge pull request #781 from Cylindric3D/typofixes_upstream 
Various typo fixes #3 - only in comments, no code changes.
 2014-02-24 22:25:38 +01:00
whosawhatsis 77df0d689a autretract fix 
I made these changes previously, but I can’t find the commit now. This
reapplies the changes to get auto retract working again.

Conflicts:
	Marlin/Configuration_adv.h
	Marlin/Marlin_main.cpp
 2014-02-24 13:24:38 -08:00
ErikZalm cc5f1d475c Merge pull request #772 from ellensp/Marlin_v1 
Updated gen3+ board pins names to current convention
 2014-02-24 22:22:15 +01:00
Cylindric 91759dede6 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 2014-02-24 17:29:37 +00:00
Cylindric 557217fc05 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan 2014-02-24 17:29:24 +00:00
RoyOnWheels aee63afccd Clarify which PID values to enter 
Users can be confused as to which values to enter after a PID tune. Updating the message to help clarity it.
New message: "PID Autotune finished! Put the last Kp, Ki and Kd constants from above into Configuration.h"

Old message: "PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h"
 2014-02-23 14:36:50 -08:00
Gabe Rosenhouse 99f6326544 Remove unnecessary dependency on time.h from qr_solve.cpp 
Fixed compiler errors on Ubuntu using arduino-core
 2014-02-20 16:43:37 -08:00
Cylindric ea669cb504 Fix some extra and some missing tabs, to make the file consistent. 2014-02-20 14:28:29 +00:00
Cylindric b46a1b6360 Update the menu plan document with the current menu as per ultralcd.cpp. 2014-02-20 14:20:27 +00:00
Cylindric 3cc7626d1f Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into update_menu_plan 2014-02-20 14:12:10 +00:00
Gabe Rosenhouse 174b8d99d5 Simplify 3-point probing using new code only 2014-02-19 21:48:05 -08:00
Gabe Rosenhouse 3b718b816c better documentation 2014-02-19 14:04:37 -08:00
Gabe Rosenhouse 34fd59c370 ABL at any points 2014-02-19 13:18:21 -08:00
Cylindric 541155ea87 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 2014-02-19 15:52:18 +00:00
alexborro 9fa328e5c8 Merge pull request #793 from MissionSt/use_axis_enums 
Use constants instead of numeric literals
 2014-02-19 10:15:57 -03:00
Gabe Rosenhouse f308a8af91 update comment 2014-02-19 01:06:24 -08:00
Gabe Rosenhouse 357e31270a Prevent G29 without first homing in X and Y 
If position is unknown, then G29 can be dangerous.
 2014-02-19 00:51:43 -08:00
Gabe Rosenhouse d2d7d186b5 Use descriptive constants, more 2014-02-19 00:10:17 -08:00
Gabe Rosenhouse 2ccdf4f36d Use descriptive constants instead of numeric literals 2014-02-19 00:02:59 -08:00
Christian Axelsson c00383f286 Fixed typo. 2014-02-18 18:50:12 +01:00
Cylindric 60f72a78a9 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 2014-02-18 17:31:58 +00:00
nothinman abba7a0003 Merge pull request #782 from marcovannoord/Marlin_v1 
Added dutch to language.h
 2014-02-18 16:19:50 +00:00
Cylindric b868d668fa Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into typofixes_upstream 2014-02-18 12:11:01 +00:00
Marco 8212d8d543 Revert "Fixed small typo that would prevent compiling" 
This reverts commit 51ae4881ab.
 2014-02-18 10:40:25 +01:00
daid 46bae30573 Merge pull request #776 from whosawhatsis/fwretract 
Fwretract fixes, cleanup
 2014-02-18 10:39:28 +01:00
Marco 51ae4881ab Fixed small typo that would prevent compiling 2014-02-18 09:47:36 +01:00
Marco 498d76fd79 Fixed some messages where the text shown on the screen was more than 17 characters 2014-02-18 09:40:10 +01:00
Jim Morris af9395ac2e Add M605 to dynamically set delta configuration 
Save above configs in eeprom
fix docs in createTemperatureLookupMarlin.py
add missing azteegX3pro digipot settings in delta example config
 2014-02-17 20:50:59 -08:00
nothinman fd42f0d226 Merge pull request #783 from MissionSt/fix/syntax-error 
Fix compile error
 2014-02-17 20:59:43 +00:00
nothinman 96217bf36a Merge pull request #777 from PxT/M114 
Add whitespace to M114 output
 2014-02-17 18:07:47 +00:00
Marco cf5c3b6610 Added dutch to language.h 2014-02-17 17:00:50 +01:00
Gabe Rosenhouse d1c64b9dc4 Fix syntax error introduced in 477b6fa1d 2014-02-17 07:56:19 -08:00
Cylindric 5d50819791 Various typo fixes - only in comments, no code changes. 2014-02-17 13:04:44 +00:00
nothinman 3f455889d0 Merge pull request #769 from Cylindric3D/typofixes_1 
Various typo fixes - only in comments, no code changes.
 2014-02-17 11:30:01 +00:00
nothinman 4ddedb3b27 Merge pull request #780 from Cylindric3D/typofixes_2 
Various typo fixes #2 - only in comments, no code changes.
 2014-02-17 11:29:18 +00:00
nothinman d4ba23bc28 Merge pull request #770 from josefpavlik/Marlin_v1 
Marlin v1
 2014-02-17 11:27:05 +00:00
nothinman bbb424bd2f Merge pull request #779 from MissionSt/makefile-fix-abl 
Makefile fixes
 2014-02-17 11:22:34 +00:00
Cylindric 8f0cee2a14 Various typo fixes - only in comments, no code changes. 2014-02-17 10:58:36 +00:00
Cylindric 08263ae66e Merge branch 'Marlin_v1' into typofixes_1 2014-02-17 10:28:20 +00:00
Gabe Rosenhouse 5bd09d26e2 Makefile works with auto bed leveling 2014-02-16 23:23:29 -08:00
Gabe Rosenhouse b45beeffd6 typo fix in Makefile 2014-02-16 23:23:29 -08:00
Paul Telford 306588925d Add whitespace to M114 output 2014-02-16 21:01:19 -08:00
whosawhatsis c43838bb1e disable auto retract by default 
This should make it safe to enable FWRETRACT by default, with
autoretract (which should now be fixed) only enabled by M209. FWRETRACT
should probably now default to enabled (to make G10/G11 and M207-209
available, without changing functionality when they are not used), but
I’ll save that for another pull request/discussion.
 2014-02-16 19:04:54 -08:00
whosawhatsis 99f0e44864 Move FWRETRACT defaults to configuration_adv.h 2014-02-16 19:00:28 -08:00
whosawhatsis 66e3869138 Fix autoretract 
This takes the (now working) G10/G11 code and moves it to a function,
which is called by G10 and G11, and also called by G1 if autoretract is
enabled and a retract/recover move is detected.
 2014-02-16 18:59:04 -08:00
whosawhatsis 2f2459c0db Fix G10/G11 Z-lift 2014-02-16 18:15:34 -08:00
Gabe Rosenhouse 8c5675c290 Use language.h instead of English literals for "bed" 2014-02-16 17:16:00 -08:00
Gabe Rosenhouse 0f7393a13e Refactor 'accurate' auto bed leveling to use probe_pt() 2014-02-16 10:44:15 -08:00
Gabe Rosenhouse c4fbb44d6d Refactor 3-point auto bed leveling to use probe_pt() 2014-02-16 10:44:08 -08:00
Gabe Rosenhouse ad2c6488c7 Add probe_pt(), useful for auto bed leveling 2014-02-16 10:38:29 -08:00
Peter c9c83a4560 Updated gen3+ board pins names to current convention 2014-02-16 00:47:06 +13:00
Mark Hanford ab0d3c4fb3 Various typo fixes - only in comments, no code changes. 2014-02-14 11:48:24 +00:00
Josef Pavlik 477b6fa1df move engaged from lcd console refreshes power off timeout 2014-02-14 12:37:21 +01:00
Josef Pavlik 831fc2a952 Pt100 and Pt1000 temperature sensors handling 2014-02-14 12:26:27 +01:00
nothinman 7dcd350941 A few changes to Russian, changed LCD strings to be <=17 characters. 2014-02-13 11:58:14 +00:00
daid c31bb2b7ad Only show the ZProbe offset when auto-bed-leveling is enabled. 2014-02-13 11:48:55 +01:00
daid 46f5bea19f Add configurable beep for UltiPanel. 2014-02-13 11:17:33 +01:00
daid d16a770855 Ultimainboard 2.x does not has a PS_ON pin. 2014-02-13 10:57:03 +01:00
daid 71bb3a8133 Add comments for Ultimainboard 2.0 configuration. 2014-02-13 10:53:46 +01:00
daid 9b7d87e885 Remove duplicate contrast define. 2014-02-13 10:50:17 +01:00
daid 816f0a678a Merge pull request #768 from whosawhatsis/Marlin_v1 
multiple FWretract fixes
 2014-02-13 09:14:57 +01:00
whosawhatsis 6e43398509 G10/G11 bugfixes 
Previous version was broken by using G92 E0 between retract and recover.
 2014-02-12 13:03:00 -08:00
whosawhatsis d6c5c503d4 correct feedrate units in comments for M207/M208 2014-02-12 13:02:47 -08:00
nothinman 15d6116188 Merge pull request #689 from cajun-rat/tidy 
Use C++ initialization list
 2014-02-12 16:38:11 +00:00
Martin Lukasik 0b9ecf3824 Language cleanup, part 1. 2014-02-12 13:21:26 +00:00
whosawhatsis b5ba5c1465 Merge branch 'Marlin_v1' of https://github.com/whosawhatsis/Marlin into Marlin_v1 2014-02-11 19:06:03 -08:00
whosawhatsis 78e7654601 Keep FWRETRACT values in terms of millimeters when using M200 
for volumetric E units
 2014-02-11 19:05:35 -08:00
whosawhatsis 3f6d44d40b Keep FWRETRACT values in terms of millimeters when using M200 for volumetric E units 2014-02-11 18:50:11 -08:00
Cylindric 363dc2f0e8 Merge branch 'Marlin_v1' into update_menu_plan 2014-02-12 00:51:16 +00:00
nothinman 5f797ca29f Updated Polish, changed default firmware URL to Marlin. 2014-02-11 22:38:01 +00:00
Mark Hanford 0778f5f028 Add missing entries to the new Aragonian language. 2014-02-11 14:40:53 +00:00
Mark Hanford 54bab3e0d0 Merge branch 'Marlin_v1' into localisation 
Conflicts:
	Marlin/language.h
 2014-02-11 14:35:28 +00:00
Mark Hanford bdd0211aeb Move strings in ultralcd.cpp into language.h. 2014-02-11 13:54:43 +00:00
Daniel Martinez c8e5a82d49 keep English as default lang. 2014-02-09 18:24:24 +01:00
Daniel Martinez f64592e362 Add Aragonese translation 2014-02-09 18:19:37 +01:00
ErikZalm ac74f45dc0 Merge pull request #752 from MatixYo/patch-3 
Update language.h
 2014-02-09 17:52:26 +01:00
MatixYo 36086d3ca4 Update language.h 
Updated Polish translations.
 2014-02-07 19:15:51 +01:00
Cylindric 1781031f2d Update LCD Menu Tree with current options, based on ultralcd.cpp and language.h. 2014-02-07 01:52:44 +00:00
Jim Morris d485988bec fix typo 2014-02-05 14:39:45 -08:00
Jim Morris 8a1fd25363 Default is to not define digipot_i2c 2014-02-05 14:28:23 -08:00
Jim Morris 5097c57d3a Added pins for Azteeg X3 Pro under motherboard 68 2014-02-05 14:25:42 -08:00
Jim Morris b819fc53ca Add Azteeg X3 Pro as motherboard 68 
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
 2014-02-05 01:47:12 -08:00
ErikZalm e1ae7952eb Merge pull request #743 from Opticalworm/Marlin_v1 
Improved support for panelolu2 encoder and buzzer
 2014-02-03 12:33:10 -08:00
David Forrest a5f53f0cf3 Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS 2014-02-03 14:50:28 -05:00
Ronald 8d162e5bd7 Improved support for panelolu2 encoder and buzzer 
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS  which is used to alter the default
buzzer sound.

When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS

When selecting the sanguinololu 1284p the following is true:
- its now enables  LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
 2014-02-03 07:45:03 +00:00
whosawhatsis b2c11ba980 Change diameter code to 'D' 
For some reason that I can’t figure out, the decimal is dropped when
using ’S’ for the code.

Also some minor code improvements to M200.
 2014-02-01 18:49:25 -08:00
ErikZalm 61059385a3 Merge pull request #737 from whosawhatsis/M200 
M200 implementation
 2014-02-01 10:37:49 -08:00
whosawhatsis 856edfcc0d Fixed math 
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
 2014-01-31 08:43:11 -08:00
ErikZalm 0d81ae77bc Merge pull request #727 from drf5n/oversampling 
temperature.cpp: Actually use OVERSAMPLENR in the oversampling calculation.
 2014-01-31 07:09:10 -08:00
ErikZalm 84df13f7d1 Merge pull request #721 from drf5n/lcdOnly 
Enable basic ULTRA_LCD screen w/o encoders and menus.
 2014-01-31 07:07:12 -08:00
ErikZalm 4c7e9502ad Merge pull request #718 from drf5n/temptableRes 
createTemperatureLookupMarlin.py: Add resolution comments and format for...
 2014-01-31 07:06:02 -08:00
ErikZalm 652a0f6b5a Merge pull request #717 from drf5n/tpins2 
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/...
 2014-01-31 07:05:20 -08:00
ErikZalm 96a0cdc541 Merge pull request #716 from drf5n/maketeensy 
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HAR...
 2014-01-31 07:04:29 -08:00
whosawhatsis d24df7af2c M200 implementation 2014-01-31 00:54:19 -08:00
David Forrest f0b8d5ba3d createTemperatureLookupMarlin.py: Change comment to refer to actual program name. 2014-01-29 23:34:22 -05:00
David Forrest 50f44d9249 createTemperatureLookupMarlin.py: Truncate to short after application of OVERSAMPLENR for improved resolution. 2014-01-29 23:24:07 -05:00
David Forrest f5b5dd8038 createTemperatureLookupMarlin.py: Add output of Steinhart-Hart coefficients. 2014-01-29 22:59:47 -05:00
David Forrest 76cf07c3f7 Configuration.h: Use OVERSAMPLENR in dT_PID definition. 2014-01-21 23:25:51 -05:00
David Forrest 476c7193d8 temperature.cpp: Use OVERSAMPLENR in oversampling calculation. 2014-01-21 16:49:03 -05:00
whosawhatsis f08bb8bb6a Previous commit borked. 2014-01-19 22:06:45 -08:00
whosawhatsis b1f8f492c6 Remove previous_millis_cmd update from extruder runout prevention code 
This seems to defeat the purpose of previous_millis_cmd, preventing the
time elapsed from previous_millis_cmd from ever reaching
max_inactive_time or stepper_inactive_time while the heat was on.
 2014-01-19 19:22:08 -08:00
whosawhatsis 8a5eaa3c9b Fix crash after home bug 
Fixes a bug in the Extruder Runout Prevention feature that caused the
extruder to move back to “current_position” after a move if it was
activated while the move was in progress. For long home moves (which
are longer than the dimensions of the machine’s working area), this
would cause the machine to crash into the far end of its travel after
homing. This usually occurred on the Z axis, which could result in
damage to the machine if you don’t hit the reset button in time.
 2014-01-19 19:11:51 -08:00
David Forrest 61a7256d42 Enable basic ULTRA_LCD screen w/o encoders and menus. 2014-01-17 17:00:47 -05:00
l.lefebvre fdac8f6cec Update ConfigurationStore.cpp 
Unable to compile if ENABLE_AUTO_BED_LEVELING is not set (not set by default).
 2014-01-17 16:09:58 +01:00
Alex Borro 05932e4458 Add Z Probe Offset to EEPROM and Ultra LCD 2014-01-16 18:13:46 -02:00
David Forrest 7216583b8b createTemperatureLookupMarlin.py: Add resolution comments and format for Marlin. 2014-01-16 12:40:15 -05:00
David Forrest e8e0697e48 fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/Printrboard compatibility. 2014-01-16 11:23:29 -05:00
David Forrest 75f39fadfc Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HARDWARE_MOTHERBOARD=={8,81,82,83,84}) 2014-01-16 10:58:35 -05:00
daid df194f75e1 Added PT100 support for Ultiboard2 2014-01-06 11:20:03 +01:00
daid 380144c20f Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original. 2014-01-06 11:05:02 +01:00
fsantini 6ae7f7870d Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into ErikZalm 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
 2013-12-23 12:20:32 +01:00
Phil Wise 17d6d965dc Use C++ initialization list 
This is the recommended approach for object initialization. The change
doesn't affect binary size (although in theory it could make it smaller).
 2013-12-19 21:21:46 +00:00
Joseivaldo Benito Junior ce8b9c4fc5 Correct missing parameter from last upmerge 
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
 2013-12-19 00:50:44 -02:00
Joseivaldo Benito Junior 8e48e24c7f Update Delta example files 
Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>
 2013-12-18 00:04:36 -02:00
ErikZalm 46d2443c7d Merge pull request #676 from IVI053/Marlin_v1 
Minor improvements for encoder configuration, LCD entry for PSU controll and thermistor pins on RAMPS
 2013-12-17 02:28:28 -08:00
- eed053dffb Revert "Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs" 
This reverts commit b7eadb9f37.
 2013-12-16 12:22:06 +01:00
Erik van der Zalm 8349fc89a4 Fixed planner bug 2013-12-16 11:40:23 +01:00
Francesco Santini da2a6f9a31 Accurate bed leveling: x loop inside y and zigzag motion 2013-12-13 10:31:19 +01:00
RicardoGA d29615dc0c Z and Y dual stepper drivers error 
if you try to enable Z_DUAL_STEPPER_DRIVERS the error "You cannot have dual drivers for both Y and Z" shows even if you don't have defined Y_DUAL_STEPPER_DRIVERS and don't let you compile the firmware

to solve this problem i change this line:

#ifdef Z_DUAL_STEPPER_DRIVERS && Y_DUAL_STEPPER_DRIVERS

to:

#if defined (Z_DUAL_STEPPER_DRIVERS) && defined (Y_DUAL_STEPPER_DRIVERS)

now the error only show if you define both Z_DUAL_STEPPER_DRIVERS and Y_DUAL_STEPPER_DRIVERS
 2013-12-11 14:37:43 -06:00
fsantini 5bde7fcb28 Minor code and comment polishing 2013-12-11 21:27:43 +01:00
- 20faff5935 Incorporate PS_DEFAULT_OFF for starting state on LCD menu entry 2013-12-08 21:35:57 +01:00
- e5d3044801 Added posibility to set ENCODER_STEPS_PER_MENU_ITEM in Configuration.h like ENCODER_PULSES_PER_STEP as it depends on it for usability 2013-12-08 21:34:56 +01:00
- b7eadb9f37 Made numbering of heat bed thermistor more logical as D8 is bed, D9 is Extruder 2 and D10 is Extruder 1, so T0 should be E1, T1 E1 and T2 bed to be sequential as MOSFET-Outputs 2013-12-08 21:30:42 +01:00
Michal Dyntar e8786bf110 Added support for Cheaptronic v1 electronic 2013-12-07 13:29:47 +01:00
fsantini cc2925b705 Implemented a least squares fit of the bed equation for auto bed leveling. 
The code for the LSQ solver (qr_solve) is copyrighted by John Burkardt and released under LGPL here:
http://people.sc.fsu.edu/~%20jburkardt/c_src/qr_solve/qr_solve.html
(see qr_solve.cpp for further copyright information)
 2013-12-06 21:46:25 +01:00
fsantini b64661070e Fixed the plane vector equation to a simpler one (only dependent on the normal) 
Removed the calculation of the inverse matrix since the rotation matrix is orthogonal, therefore inverted == transposed.
Much simpler and mathematically robust.
 2013-12-06 21:32:21 +01:00
Alex Borro 5c44f6c434 Bed Heater monitoring in Controller Fan 
In some cases the Bed Heater FET heats up more then stepper drivers, so
this change add the bed monitoring to the controller fan. As soon as the
bed heater is turned on, the controller fan will run as well.
 2013-11-27 23:23:06 -02:00
Alex Borro b33375d438 Z Axis Safe Homing when using Z Probe 
Recommended for those who are using the Z Probe for Z Homing (as
Z-Endstop)

This feature has two changes:

1) Allow user to choose where the Z Probe will touch the bed when homing
all axis together (G28) by setting below defines:

Z_SAFE_HOMING_X_POINT
Z_SAFE_HOMING_Y_POINT

2) Prevents the user to perform Z Axis Homing when the Z Probe is
outsite bed.
 2013-11-27 22:37:35 -02:00
Alex Borro 35905ea4f9 Allow heaters to stay full On when PWM=127 
In previous version, even with PWM = 127, the system turns the FET off
and then on in the next cycle. This bevavior may increase the FET heat
dissipation.
It was fixed keeping the FET always On when PWM=127.
 2013-11-27 18:13:38 -02:00
Erik van der Zalm a94e588765 Changed slow buttons behavior. 2013-11-17 17:41:30 +01:00
Erik van der Zalm 69af392554 Added HEATERS_PARALLEL (Request from reifsnyderb) 
This allows a hot end with two heaters and a FET for each heater. This is useful if the FET is not capable of heating two heaters.
 2013-11-17 13:29:02 +01:00
Erik van der Zalm 48a185d004 Fixed compile errors from bad commits. 2013-11-10 16:36:37 +01:00
ErikZalm 24d1f480b6 Merge pull request #647 from shaggythesheep/newfeature-M226 
Implement M226 - GCode Initiated Pause
 2013-11-10 07:27:01 -08:00
ErikZalm 95b41413e6 Merge pull request #641 from hugokernel/master 
M80 - ATX Power On related modification
 2013-11-10 07:26:35 -08:00
ErikZalm 59b96e323e Merge pull request #640 from fmalpartida/SAV-MkI 
Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD
 2013-11-10 07:26:08 -08:00
ErikZalm 2433ee6fc8 Merge pull request #637 from justuswilhelm/Marlin_v1 
Fix servo control for Melzi v2.0
 2013-11-10 07:22:12 -08:00
ErikZalm 3455a2bac2 Merge pull request #636 from PrintToPeer/Marlin_v1 
Add UUID support to M115 responses.
 2013-11-10 07:21:46 -08:00
Richard Miles dc887ef99b Implement M226 - GCode Initiated Pause 
Implemented M226 as described here:
http://reprap.org/wiki/G-code#M226:_Gcode_Initiated_Pause

Waits for pin to be become either HIGH, LOW or the inverse of what it
was before. Allows printing to pause until user interaction
 2013-11-09 15:11:58 +00:00
Charles R c244eb860c If you have a switch on suicide pin, this is useful if you want to 
start another print with suicide feature after a print without
suicide...
 2013-11-04 12:04:04 +01:00
fmalpartida 7b556d2e96 Added BT support on AT90USB devices 
Added AT90USB device BT connectivity support using second UART.
 2013-11-03 19:57:06 +01:00
Kaz Walker a5e8575829 Add UUID support to M115 responses. 2013-11-01 14:51:50 -06:00
Daniel Benamy cab84e0e5b Add (correct) missing pin definitions for Y2 
I tested this and it works.
 2013-10-30 22:44:20 -04:00
fmalpartida 5b3f60ea2e Corrected LCD only error 
If only an LCD is defined and no menu or keyboard defined, there is a
compilation error.

Added conditional compilation.
 2013-10-30 21:52:46 +01:00
Justus Perlwitz 62d0b79023 Fix servo control for Melzi 2013-10-30 20:59:58 +01:00
fmalpartida b5a964fcc5 Initial SAV MkI (RepRap CloneWars board) integration. 
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
 2013-10-30 11:45:32 +01:00
dumle29 f941203172 PS_ON configurable boot state 
Allows the user to select wheter or not the PSU should be turned on or
kept in standby when marlin boots
 2013-10-29 18:44:56 +01:00
whosawhatsis c79e3967b3 Make G11 not horribly broken 2013-10-24 18:58:42 -07:00
bkubicek d69822ed51 Fix '#' 
since it can occure in comments.
 2013-10-22 10:34:51 +02:00
bkubicek 2fb2a0a119 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2013-10-22 10:08:21 +02:00
bkubicek 39d88bcccb preparation for hibernation 
If a print is stopped, it would be nice in the future to write a file with the printer state, the filename of the print, and the position within the print.
this file could be read, to continue a previously stopped print.
not finished yet.
 2013-10-22 10:04:08 +02:00
bkubicek ab965376ff Sub-file calls. 
by overloading M32 it is now possible to execute gcode files from other gcode files, with a fixed recursion level.
This can be used e.g. for having a real start.g and end.g somewhere on the sd card, which are then called from the normal print file.
Another usecase would be to have macro-files for nozzle-change and layerchange.
I have not tested the speedwise performance. The testing was done with pronterface.

syntax:
normal call from sd card will open the new file and continue executing there.
M32 !/path/filename#
this however will call the new file and return to the caller file.
M32 P !/path/filename#
with the optional "S<position>" the  file starting position can be set.
this is for continuing prints from a previous location.
 2013-10-22 10:02:18 +02:00
bkubicek b2cc27e5ea Added a magic character for sd buffering. 
if a '#' is read now the buffer will be emptied before reading ahead.
This is so one can execute files from within gcode files, without messing the buffer with preread characters from the caller file.
# can not occure in sd files imho, because it should only occure within checksums in ther serial communication.
Yes, thats a lame argument. If you have a better idea please tell me. It has to be a character that one can type
on a keyboard manually.
 2013-10-22 09:54:13 +02:00
Erik van der Zalm 8a08cca0f2 Added temperature status less. 
Hopefully fixed viky button handling without braking other boards
 2013-10-20 12:12:35 +02:00
Erik van der Zalm 667d278f54 Revert "Fix for Viki display" 
This reverts commit 314fd13c39.
 2013-10-20 10:16:46 +02:00
Erik van der Zalm bf27e79e74 Small BlinkM fix 2013-10-20 10:06:02 +02:00
Erik van der Zalm 87e28c0599 Added ifdefs to blinkm 2013-10-20 09:55:15 +02:00
Erik van der Zalm 24c6b2ab35 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2013-10-20 09:51:58 +02:00
ErikZalm 6a803ba9c5 Merge pull request #590 from timkoster/Marlin_v1 
Added BlinkM support over i2c
 2013-10-20 00:51:35 -07:00
Erik van der Zalm 457d8a0acb Fixed merge conflicts 2013-10-20 09:50:27 +02:00
Alex Borro 6f85a8c7aa Bed auto Leveling change: Raise Z before homing 
- Added "Z_RAISE_BEFORE_HOMING" for raising Z the defined distance
before homing. This is useful to avoid Z-Probe collision when hotend is
near bed.

- Fixed the issue of Z not going bellow Z_PROBE_OFFSET when
"min_software_endstops" is true.
Now the Z_PROBE_OFFSET is not set in Z_MIN_POS, it is added after
homing.
 2013-10-12 17:28:11 -03:00
Alex Borro dd3086d3f2 Show Temperature ADC values 
If "SHOW_TEMP_ADC_VALUES" is defined in Configuration_adv.h, the M105
command will present, after tradicional temperatures, the ADC value read
from temp sensors. This is great for adjusting thermistor tables with
thermocouple.

From Pronterface you can see the ADC value and compare with a
thermocouple reading.. then you just need to create your own thermistor
table.

Since this merge doesnt change the original information, it doesnt mess
with PC software parsing (tested under Pronterface and Repetier-Host).
 2013-10-12 10:41:23 -03:00
bkubicek 7fad13a1e2 Reverse SD card file name order. 
This is _not_ automatically the cronological, since deleting a file will free
the filesystem descriptor for it, which then will be used by the next file copied on it.
Since this makes the auto0.g file very inaccessible, I put the option back, to have it in the prepare menu.

this should satisfy https://github.com/ErikZalm/Marlin/pull/373

as a reminder, auto0.g will be executed every time after a boot with sd card present and file present.
thereafter, if there is a file auto1.g this will be done. Thats IMHO the best place to put settings, and prepare heating.
I also execute again after each (now again via the prepare menu) before starting a new print/ after a failed one.
It for me 100% replaces any start.gcode form the slicers.
 2013-10-12 13:24:55 +02:00
bkubicek b832f5b9f6 added delta tower babystepping. Its untested, but hopefully florian horsch will be able to try. 
also, removed some trouble for compilation with corexy.
I think that babystepping is only possible in z for a delta tower.
not sure if it would be usefull to step individual motors on a delta, i don't own one
 2013-10-07 09:14:04 +02:00
bkubicek c38b0855c8 I think that filament change is ready for the masses. I have tested very often with my ultimaker. 
I strongly vote for it being a single gcode, because otherwise the triggering from the menu is terrible.
 2013-10-06 21:20:26 +02:00
bkubicek d147a057ac Add the socalled "Babystepping" feature. 
It is a realtime control over the head position via the LCD menu system that works _while_ printing.
Using it, one can e.g. tune the z-position in realtime, while printing the first layer.
Also, lost steps can be manually added/removed, but thats not the prime feature.
Stuff is placed into the Tune->Babystep *

It is not possible to have realtime control via gcode sending due to the buffering, so I did not include a gcode yet. However, it could be added, but it movements will not be realtime then.

Historically, a very similar thing was implemented for the "Kaamermaker" project, while Joris was babysitting his offspring, hence the name.

say goodby to fuddling around with the z-axis.
 2013-10-06 21:14:51 +02:00
Erik van der Zalm bca353cc12 Fixed duplicate define in fastio.h 2013-10-03 19:24:53 +02:00
Alex Borro 253dfc4bc1 Bed Auto Leveling feature 
Check the Readme for instruction how to enable and configure the feature
 2013-09-29 13:20:06 -03:00
ErikZalm 1bda6bf862 Merge pull request #609 from phq1910/patch-1 
Update Configuration.h
 2013-09-26 11:47:58 -07:00
ErikZalm c80aac1518 Merge pull request #610 from phq1910/patch-2 
Update pins.h
 2013-09-26 11:47:47 -07:00
Erik van der Zalm 314fd13c39 Fix for Viki display 2013-09-26 20:32:19 +02:00
phq1910 4f7c6dfe35 Update pins.h 
Include Pins cpu Sethi 3D
 2013-09-26 11:40:54 -03:00
phq1910 57173739a1 Update Configuration.h 
Include CPU Sethi 3D
 2013-09-26 11:29:44 -03:00
Erik van der Zalm 0dca49a7c0 Added Azteeg X3 board. 2013-09-24 17:31:16 +02:00
Erik van der Zalm d8c2c810b4 Added info to the delta configuration files in the configuration.h file 2013-09-23 23:29:46 +02:00
Erik van der Zalm 9bc88f8bab Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file 2013-09-23 23:25:11 +02:00
Erik van der Zalm 3ca1ca6869 Fixed missing ENCODER_PULSES_PER_STEP 2013-09-23 23:18:35 +02:00
Tim Koster 97b0da0c2e Removed #ifndef BLINKM 2013-09-22 10:43:27 +03:00
Tim Koster 61db046b32 Added #ifdef BLINKM around new code. Also refined BlinkM.h. 2013-09-20 10:57:42 +03:00
Richard Miles 77df2ab0e7 Make Y_DUAL_STEPPER_DRIVERS disabled by default 2013-09-17 21:49:44 +01:00
Richard Miles ed1ab42186 Added Y_DUAL_STEPPER_DRIVERS 
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped in either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
 2013-09-17 19:19:20 +01:00
Richard Miles f4a59e4ce5 Revert "Added Y_DUAL_STEPPER_DRIVERS" 
This reverts commit 7ee275b620.
 2013-09-17 19:05:49 +01:00
Richard Miles 7ee275b620 Added Y_DUAL_STEPPER_DRIVERS 
Enables two stepper drivers to be used for the Y axis (useful for
Shapeoko style machines)
Each Y driver can be stepped either the same way or in opposite
directions, accounting for different hardware setups (leadscrew vs. belt
driven)
 2013-09-17 19:02:00 +01:00
ErikZalm 6a1e980c6d Merge pull request #600 from xoan/Encoder_Pulses_Per_Step 
add ENCODER_PULSES_PER_STEP
 2013-09-14 04:56:45 -07:00
ErikZalm 20076a8bd3 Merge pull request #598 from GDV0/Marlin_v1 
FIx compilation error when enabling SERVO_ENDSTOPS (#591)
 2013-09-14 04:54:19 -07:00
Erik van der Zalm 3626b5ad8b Removed Delta from the default config file. 
Changed EEPROM CHITCHAT behavior. M503 is always enabled.
 2013-09-14 13:50:09 +02:00
Xoan Sampaiño bf7007d02f add ENCODER_PULSES_PER_STEP 2013-09-13 04:12:51 +02:00
GDV0 f17506c504 FIx compilation error when enabling SERVO_ENDSTOPS (#591) 2013-09-11 23:09:37 +02:00
Martin Lukasik acd8619809 Fan fix for Panelolu2+Sanguinololu. 2013-09-10 22:10:58 +01:00
George Roberts 595580556c Fixed bug that makes ulticontroller knob backwards introduced Feb 28 2013 by Robert. 
Bug introduced in version 6beb42cdf6.
Robert did a good job of simplifying but messed up this chunk of code.

Looking at working version: 839bef6d5d
it seems there is no case where encrot3 should be defined as 2
because if ULTICONTROLLER is defined then NEWPANEL is also defined.
 2013-09-10 09:56:19 -04:00
Tim Koster 88dfeefca3 Define BlinkM default disabled 2013-09-10 12:32:21 +03:00
Tim Koster 5350faf2a2 Merge https://github.com/timkoster/MarlinBlinkM into Marlin_v1 2013-09-10 12:27:26 +03:00
Tim Koster 7016cc9511 Added BlinkM support over i2c 2013-09-10 12:18:29 +03:00
Tim Koster 3b315b3da0 Added BlinkM support over i2c 2013-09-06 22:25:39 +03:00
Jim Morris f26f26b7bd Fix the example delta configuration as someone forgot to do it. 2013-09-05 16:36:55 -07:00
Peter Hercek 9aa2229077 add command M666 for adjusting delta printer endstop position 2013-08-28 01:15:20 +02:00
Robert F-C 9547fb9dfb Add duplication and auto-park mode for dual x-carriage support. 2013-08-08 00:10:26 +10:00
Steve Kelly 53614e5144 add pins for rambo lcd 2013-08-03 11:45:53 -05:00
Steve Kelly b42d24e31e add additional pins to avr2560 for rambo lcd 2013-08-03 11:37:12 -05:00
Nicolas Rossi b0c8120fcc Added feedrate setting in exemple config for manual moves from panel 2013-08-03 13:09:53 +02:00
Nicolas Rossi a54fe2d73c Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1 
Conflicts:
	Marlin/Marlin_main.cpp
 2013-08-03 13:05:56 +02:00
ErikZalm 7ea63d08df Merge pull request #565 from iXce/avrdudeconfpath 
Detect OS in Makefile to use the correct avrdude.conf path
 2013-08-02 13:16:07 -07:00
ErikZalm 4187b637a5 Merge pull request #570 from hg42/separate-INVERTING-macros-for-MIN-and-MAX-endstops 
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
 2013-08-02 13:15:30 -07:00
ErikZalm 07e7de3600 Merge pull request #569 from hg42/convert-PROTOCOL-macros-from-statements-to-expressions 
convert PROTOCOL macros from statements to (multiple, comma separated) expressions
 2013-08-02 13:13:29 -07:00
Guillaume Seguin c0c4c97db6 Detect OS in Makefile to use the correct avrdude.conf path 2013-08-01 19:20:27 +02:00
hg42@gmx.net 2ca983568d separate INVERTING for MIN and MAX endstops (6 #defines instead of 3) 2013-08-01 15:06:39 +02:00
hg42@gmx.net 3700f688f5 convert PROTOCOL macros from statements to (multiple, comma separated) expressions 2013-08-01 14:56:39 +02:00
daid a504c88346 Fix a bug where the PID controllers D action kicks in hard as soon as the PID controller starts. 2013-08-01 14:12:30 +02:00
Nicolas Rossi 394ed08f88 Added feedrate setting for manual moves from panel 2013-07-30 14:33:30 +02:00
Nicolas Rossi 9bf1cf1b22 Pre-calculate diagonal rod length squared 2013-07-30 14:09:21 +02:00
Nicolas Rossi 4623e78ce0 Added Honeywell thermistor 135-104LAF-J01 2013-07-30 14:02:18 +02:00
Brendan-csel d7f384f680 Skip SD menu refresh if nothing has changed 2013-07-30 14:02:15 +02:00
Brendan-csel abc8320a68 Save LCD_CLICKED before it is cleared 
The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.
 2013-07-30 14:02:13 +02:00
Guillaume Seguin f4c3135c6d Add Panelolu2 pins for RAMPS1.3 2013-07-30 14:02:11 +02:00
Guillaume Seguin aae42c68f9 Update French translation in language.h 2013-07-30 14:02:08 +02:00
Guillaume Seguin 4d435c38a6 Add support of LiquidTWI2-based panels to Makefile 
Use LIQUID_TWI2=1 as make argument to enable this support
 2013-07-30 14:02:06 +02:00
Guillaume Seguin 6c42a3a339 Woops, fix logic 2013-07-30 14:02:04 +02:00
Guillaume Seguin 376d8af2c8 Report temperatures for all extruders 2013-07-30 14:02:01 +02:00
ErikZalm 434b6a05c1 Merge pull request #552 from iXce/Marlin_v1 
Report temperatures for all extruders in reply to M105
 2013-07-29 10:39:21 -07:00
ErikZalm bdc2621119 Merge pull request #561 from Brendan-csel/Marlin_v1 
Fix for Viki LCD issues printing from SD card
 2013-07-29 10:38:17 -07:00
ErikZalm 6965bd4e15 Merge pull request #560 from njprossi/Marlin_v1 
Fixed move from panel for delta bot #557
 2013-07-29 10:37:40 -07:00
ErikZalm a55b33e613 Merge pull request #559 from iXce/panelolupinsramps13 
Add Panelolu2 pins for RAMPS1.3
 2013-07-29 10:37:03 -07:00
ErikZalm 8b34351537 Merge pull request #558 from iXce/frenchupdate 
Update French translation in language.h
 2013-07-29 10:36:43 -07:00
ErikZalm 735e556724 Merge pull request #555 from iXce/liquidtwi2_makefile 
Add support of LiquidTWI2-based panels to Makefile
 2013-07-29 10:33:54 -07:00
Brendan-csel d80aecda0a Skip SD menu refresh if nothing has changed 2013-07-29 21:00:29 +12:00
Brendan-csel be2dea1dc6 Save LCD_CLICKED before it is cleared 
The SD card menu was refreshing so slowly that the button interrupt was clearing LCD_CLICKED before the menu items could check it.
 2013-07-29 20:58:09 +12:00
Nicolas Rossi 55c287a69e Fixed move from panel for delta bot #557 2013-07-28 22:54:37 +02:00
Guillaume Seguin 1902d339b0 Add Panelolu2 pins for RAMPS1.3 2013-07-28 19:19:57 +02:00
Guillaume Seguin eb23a68e92 Update French translation in language.h 2013-07-28 18:50:47 +02:00
ErikZalm 1561c6df51 Merge pull request #547 from wolfmanjm/delta-configuration 
Setup Default configuration for Deltas if DELTA is defined
 2013-07-24 03:11:36 -07:00
Guillaume Seguin 374bc99fa3 Add support of LiquidTWI2-based panels to Makefile 
Use LIQUID_TWI2=1 as make argument to enable this support
 2013-07-24 12:09:53 +02:00
Jim Morris ab624eac2a revert COnfiguratiuon to the same as head 2013-07-24 02:57:46 -07:00
Jim Morris 52f79ffeca add an example default configuration for delta style bots 2013-07-24 02:55:52 -07:00
Jim Morris b9d7ccf1cd Merge remote-tracking branch 'upstream/Marlin_v1' into delta-configuration 
Conflicts:
	Marlin/Marlin_main.cpp
 2013-07-24 02:49:25 -07:00
Guillaume Seguin d4d1540727 Use -fno-use-cxa-atexit to override gcc --enable-cxa_atexit 2013-07-24 11:19:38 +02:00
Guillaume Seguin 01ed99143c Woops, fix logic 2013-07-23 23:34:42 +02:00
Guillaume Seguin 76841450c8 Only display poweron/poweroff if PS_ON_PIN > -1 2013-07-23 22:28:30 +02:00
Guillaume Seguin 44f327d738 Uniformly reindent language.h 2013-07-23 22:13:40 +02:00
Guillaume Seguin 326d2db025 Update language.h so that all languages compile 
Some strings still need translation, but at least everything compiles.
 2013-07-23 22:11:54 +02:00
Guillaume Seguin 2cb716f513 Run Marlin/language.h through dos2unix 2013-07-23 21:49:37 +02:00
Guillaume Seguin 34da3a0a3f Merge github.com:ErikZalm/Marlin into Marlin_v1 
Conflicts:
	Marlin/language.h
 2013-07-23 21:46:41 +02:00
Guillaume Seguin 18199ff960 Merge github.com:ErikZalm/Marlin into Marlin_v1 2013-07-23 21:33:52 +02:00
Robert F-C fb5334f428 Fixed compile error when QUICK_HOME is defined. 
As well a couple of minor changes to handling of extruder offset for
dual x-carriage mode.
 2013-07-22 22:46:14 +10:00
Robert F-C c3568398b5 Disable DUAL_X_CARRIAGE by default 2013-07-20 23:50:30 +10:00
Robert F-C 39cd3dbdbe Remove dual x-carriage functionality that could/should be implemented in slicer 
Also added a couple of missed merge lines in homeaxis() from previous
commit.
 2013-07-20 13:07:50 +10:00
Jim Morris fb20ceabce enable soft endstops for delta 
disable delta by default
 2013-07-17 16:21:51 -07:00
Jim Morris d01ee7e7b5 fix zjerk being the same for delta as xy jerk 
add more delta defaults
on delta make second home even slower
 2013-07-17 16:14:07 -07:00
Robert F-C d7390e13d9 Support dual x-carriage printers 
Dual x-carriage designs offer some substantial improvements for dual
extruder printing.
 2013-07-17 22:44:45 +10:00
Jim Morris f3aa2a48e7 update max pos 2013-07-17 01:29:51 -07:00
Jim Morris 460751503e Added default configurations for deltas when DELTA is defined 2013-07-17 01:17:27 -07:00
Maik Stohn 9da94c247a fixed bad lcd commit from makr3d 
#elsif does not exist #elif is correct
 2013-07-15 17:34:21 +02:00
Erik van der Zalm 59004023fd Fixed typo 2013-07-15 17:22:56 +02:00
Erik van der Zalm 461dad6e05 Added : M32 - Select file and start SD print (Can be used when printing from SD card) 
Untested
 2013-07-14 22:39:59 +02:00
Erik van der Zalm c4a2077951 M109 and M190 now wait when cooling down if R is used instead of S. 
M109 S180 waits only when heating.
M109 R180 also waits when cooling.
 2013-07-14 21:10:24 +02:00
ErikZalm 8a2a3ef91d Merge pull request #531 from iXce/Marlin_v1_lcd 
Only clamp panel movements if software endstops are enabled
 2013-07-14 06:50:23 -07:00
Erik van der Zalm 6397b3339c restored configuration.h defaults 2013-07-14 15:49:03 +02:00
Erik van der Zalm cdaaad3df1 Merge branch 'Marlin_v1' of https://github.com/makr3d/Marlin into makr3d-Marlin_v1 2013-07-14 15:45:49 +02:00
Erik van der Zalm e3bdefd873 fixed missing #endif 2013-07-14 15:42:53 +02:00
Erik van der Zalm a5be0c52c6 no message 2013-07-14 15:35:54 +02:00
Michael Mayer e509cdbeb0 added contrast control function for gLCDs 2013-07-14 15:28:26 +07:00
Michael Mayer 99b7e926e7 added MaKr3d Melzi board 2013-07-14 15:17:55 +07:00
Gabino Lopez 68be33b1fc Update language.h 
I update the spanish Messages, now this compile for spanish language.
 2013-07-04 10:23:00 +02:00
daid acb3271c9a Merge pull request #534 from xifle/Marlin_v1 
Fixes compiler warning for feedrate deadzone
 2013-07-01 23:41:51 -07:00
xifle 61fe430d4f Should fix compiler warning for feedrate deadzone 2013-07-01 11:10:02 +02:00
Gord Christmas fde17d5720 Fix for ugly code compilation errors in SERVO_ENDSTOP checks 2013-06-28 08:02:04 -07:00
Guillaume Seguin aa65c20d1f Only clamp panel movements if software endstops are enabled 2013-06-28 14:18:00 +02:00
Erik van der Zalm ecf3ab5de4 Added thermistor 60 to configuration.h 2013-06-27 23:25:51 +02:00
Nicolas Rossi 2daa85918e Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
	Marlin/language.h
	Marlin/pins.h
	Marlin/ultralcd.cpp
 2013-06-20 23:59:56 +02:00
Erik van der Zalm 2015989f84 Added DISABLE_MIN_ENDSTOPS 2013-06-18 19:20:26 +02:00
Christian Inci 648d45cfb2 Fix Pin Description Typo 
Reverse 'Bed' and 'Fan' at the RAMPS 33 Description.

Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
 2013-06-16 23:35:33 +02:00
ErikZalm 171719f18c Merge pull request #525 from lajos/ultralcd_pid 
ultralcd.cpp compile errors when !defined(PIDTEMP)
 2013-06-16 00:02:54 -07:00
lajos b519af4f05 fixed another !defined(PIDTEMP) compile in ultralcd.cpp 2013-06-15 20:49:18 -04:00
lajos 7d03c52511 fixed compile error in ultralcd.cpp when PIDTEMP undefined 2013-06-15 18:09:52 -04:00
lajos 02dee80fa5 added Azteeg X1 motherboard 2013-06-15 16:58:17 -04:00
Henrik Brix Andersen 47dc70e3ec Fix location of avrdude.conf 2013-06-15 09:50:25 +02:00
Henrik Brix Andersen 1d258903bb Allow command line compilation when using BEEPER. 2013-06-15 09:36:55 +02:00
Erik van der Zalm e34c9981ab Delta disabled by default 2013-06-11 22:33:58 +02:00
Erik van der Zalm 26a441fc7d More 3Drag controller patches. 2013-06-10 18:26:15 +02:00
Erik van der Zalm ac975ed8c2 Merge branch 'deltabot' into Marlin_v1 2013-06-10 18:20:29 +02:00
Jim Morris caa848f943 fix homing for deltas 2013-06-09 21:10:00 -07:00
Erik van der Zalm 7ad12be763 Merge branch 'Marlin_v1' of https://github.com/codexmas/Marlin into codexmas-Marlin_v1 
Conflicts:
	Marlin/Configuration.h
	README.md
 2013-06-09 23:10:41 +02:00
Erik van der Zalm 408169aef4 Merge branch 'Marlin_v1' of https://github.com/BorisLandoni/Marlin into BorisLandoni-Marlin_v1 
Conflicts:
	Marlin/Configuration.h
	Marlin/language.h
	Marlin/pins.h
 2013-06-09 22:57:40 +02:00
Erik van der Zalm bd96d22bfb Merge branch 'Marlin_v1' into thinkyhead 
Conflicts:
	Marlin/Configuration.h
	Marlin/Configuration_adv.h
	Marlin/Marlin.h
	Marlin/Marlin_main.cpp
	Marlin/Servo.cpp
	Marlin/language.h
	Marlin/pins.h
	Marlin/planner.cpp
	Marlin/ultralcd_implementation_hitachi_HD44780.h
	README.md
 2013-06-09 22:26:47 +02:00
Erik van der Zalm 73f21cd5d6 Spanish updated so far. 2013-06-09 21:40:35 +02:00
Erik van der Zalm 6f4a6e531c Merge branch 'deltabot' into Marlin_v1 2013-06-09 13:55:18 +02:00
Erik van der Zalm 01edf22a10 Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue. 2013-06-09 13:54:19 +02:00
Erik van der Zalm ff6fa09ecf Moved corexy implementation from stepper to planner 
(Thanks iquizzle)
 2013-06-09 13:10:06 +02:00
Erik van der Zalm c8dcc7c208 Allow increasing the software PWM frequency. 2013-06-09 12:52:49 +02:00
Erik van der Zalm 8b0d82e9db Removed "awaiting translation" for french 2013-06-09 12:24:06 +02:00
Erik van der Zalm 1e05d192ab Make the beep tone less offensive 2013-06-09 12:21:16 +02:00
Erik van der Zalm 373f3ecab3 Merge branch 'deltabot' of https://github.com/jcrocholl/Marlin into deltabot 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
	Marlin/pins.h
 2013-06-09 00:51:58 +02:00
kiyoshigawa f295712008 Trying to fix weird diff on ultralcd_implementation_hitachi_HD44780.h 2013-06-08 09:27:56 -06:00
kiyoshigawa 69b02031ca Fixed small error in lcd define statements. 2013-06-08 09:09:11 -06:00
kiyoshigawa 6a81291c57 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 
This should fix issues with pull request 467, I hope.

Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin.pde
	Marlin/ultralcd_implementation_hitachi_HD44780.h
 2013-06-08 08:48:18 -06:00
BorisLandoni c1cb5977ee Update Configuration.h 2013-06-08 14:37:39 +02:00
BorisLandoni 8a5bd8a808 Update Configuration.h 2013-06-08 14:37:17 +02:00
BorisLandoni c1d7cf939e Update language.h 2013-06-07 17:38:17 +02:00
BorisLandoni 4c7d1436e9 Update pins.h 2013-06-07 18:37:44 +03:00
BorisLandoni 6588933c04 Update Configuration.h 2013-06-07 18:36:16 +03:00
Scott Lahteine 5dabc95409 Apply all changes from latest Marlin_V1 
Diffed and merged, preserving my updates
 2013-06-06 15:49:25 -07:00
Gord Christmas a733537ddd Missed some variable declarations 
Integrated fixes from henrikbrixandersen pull request #504
 2013-06-06 09:18:03 -07:00
Gord Christmas f4f30c9d64 Added servo actuated enstop coding to allow G28 command to engage and retract a servo to specified angles. 2013-06-06 07:36:52 -07:00
Erik van der Zalm 79374f0b93 Merge branch 'reisnyderb' of https://github.com/ErikZalm/Marlin into Marlin_v1 2013-06-05 17:44:48 +02:00
Maik Stohn da05b3ba94 faster GLCD (ST7920 SW-SPI) implementation / fixes 
- fixed long menu entries (>14 or >18 chars) caused overrun in dogm lcd
implementation
- fixed pin set problem when in interrupt
- much faster ST7920 SW-SPI implementation
- increased ST7920 framebuffer size for more speed
 2013-06-05 16:27:44 +02:00
kiyoshigawa 4b19c8552e Fixing changed Configuration.h settings to be default values per ErikZalm Request. 2013-06-04 12:01:55 -06:00
Erik van der Zalm 971ec35135 Expanded M302 to allow setting the temp 2013-06-02 17:36:23 +02:00
Erik van der Zalm 5090c56651 More redundant temp sensor changes. (After testing and debugging by reifsnderb) 2013-05-29 19:29:30 +02:00
Guillaume Seguin 16b9239a26 Report temperatures for all extruders 2013-05-29 18:06:12 +02:00
ErikZalm a964b3cf3d Merge pull request #495 from Gatulibu/Marlin_v1 
Added support for Megatronics v2.0 and Minitronics v1.0
 2013-05-28 07:51:49 -07:00
Maik Stohn e8572c5239 Fix: Long menu entries (>14 or >18 chars) caused overrun in hitachi display implementation 2013-05-28 15:53:07 +02:00
Maik Stohn 7ee70c2248 Fix: removed wrong ; at end of define 2013-05-28 15:50:48 +02:00
Gatulibu b78fa6bb70 Added support for Megatronics v2.0 and Minitronics v1.0 
merged from code downloaded from reprapworld.com
 2013-05-28 14:03:31 +02:00
Erik van der Zalm 9be61cdc02 Added redundant temp sensor 2013-05-26 17:57:49 +02:00
Erik van der Zalm 7231a20dba Put #ifdef around servo pins in pins.h. This allows the pins to be used for M42. 2013-05-24 21:05:11 +02:00
Alexander Kasimir e2ff536b03 Fixed typo in Comment 2013-05-22 16:02:03 +03:00
Robert F-C 40eb07bad4 Revert and extend previous change pin check change 
Reviert previous change of #if BLAH_PIN > 0 to #if defined(BLAH_PIN) &&
BLAH_PIN > -1. Unfortunately some times pin 0 is used. For my sins I've
gone through and replaced all unsafe checks of #if BLAH_PIN > -1 with
the safe version.
 2013-05-22 21:33:23 +10:00
Maik Stohn bd33cf4a9f fixed typo / added "const" to defines for newer gcc compatibility 2013-05-21 17:58:34 +02:00
ErikZalm 567291e734 Merge pull request #485 from Banjer/Panelolu2_Melzi 
Add Panelolu2 support for Melzi
 2013-05-21 08:46:27 -07:00
Maik Stohn 8d80cbbf4c fix broken LCD commit #dfa549f268 from buildrob - GLCD/DOGM implementation was ignored 2013-05-21 16:53:38 +02:00
xifle 98d0d48191 fixed merge 2013-05-20 14:52:35 +02:00
xifle bbe67fca5a soft tab correction 2013-05-20 14:50:39 +02:00
xifle 9eeb711c96 Merged from Upstream Master 2013-05-20 14:45:37 +02:00
Bas Spaans 424101110c Add Panelolu2 support for Melzi 2013-05-19 12:09:34 +02:00