Scott Lahteine
e37dd64548
Apply LEDColor, language fixes
2017-11-29 23:58:12 -06:00
Scott Lahteine
4793c34c53
Fix M290 boolval bug
...
Fix #8577
2017-11-28 17:21:33 -06:00
Scott Lahteine
0880031e8e
Satisfy M702 dependencies
2017-11-27 13:39:59 -06:00
Scott Lahteine
0786b61ce7
Followup to #8575
2017-11-27 12:58:40 -06:00
Scott Lahteine
276271e72f
Make MBL work more like PROBE_MANUALLY
2017-11-27 02:12:29 -06:00
Scott Lahteine
22b897e77d
Show M211 output with workspace offset
2017-11-25 20:48:20 -06:00
Roxy-3D
e48fcad615
change G26 and G29 bit function names to avoid HAL collision
2017-11-25 19:58:45 -06:00
Scott Lahteine
41ec449960
Fix G26 error return
2017-11-25 19:53:14 -06:00
Scott Lahteine
d18d40e1d6
M290 report on change, P0 to leave Probe Z Offset alone
2017-11-25 16:47:39 -06:00
LVD-AC
65f365333f
[2.0.x] G33 probe error handling
2017-11-25 16:19:10 -06:00
Scott Lahteine
be00e421a7
Patch up M290, M851
2017-11-25 14:11:57 -06:00
Scott Lahteine
b49acce035
Tweaks for lcd_external_control
2017-11-24 15:53:25 -06:00
Scott Lahteine
ab03a31cc9
Patch G0/G1 for NANODLP_Z_SYNC
2017-11-24 14:11:12 -06:00
Scott Lahteine
a766dfb3b1
Merge pull request #8536 from thinkyhead/bf2_nanodlp_z_move_sync
...
[2.0.x] Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 13:11:14 -06:00
Roxy-3D
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch ( #8543 )
...
These changes may need to be warmed over. I tried to fix things with
the least amount of disruption. I just wanted to get the bugfix_v2.0.0
branch working for people again.
2017-11-24 10:39:56 -06:00
Scott Lahteine
dc82babe8e
Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 00:28:06 -06:00
Scott Lahteine
c6b0c104bb
Adapt G26 to work for all meshes
2017-11-23 22:31:37 -06:00
Scott Lahteine
c19eb33408
Move G26 to gcode sub-folder
2017-11-23 21:43:23 -06:00
Scott Lahteine
c613a1ed38
Fix indentation, stepper.h dependency, etc.
2017-11-22 14:55:30 -06:00
Scott Lahteine
3269d8dd62
Tweak M42 var
2017-11-21 16:12:08 -06:00
Scott Lahteine
3066655727
Try port*100+pin, fix config dependency
2017-11-20 13:58:23 -06:00
Bob-the-Kuhn
a28ccabe2a
M42 P1.20 fix
2017-11-20 13:58:02 -06:00
Scott Lahteine
c0000a0cdc
Move servo code to modules/servo.*
2017-11-19 14:23:02 -06:00
Bob-the-Kuhn
c14000775b
PWM fixes, slow down fan update
...
include LPC1768 syntax for M42
couple more pin_t changes
consistency
change M42 to R, P format
Revert "change M42 to R, P format"
This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
2017-11-18 07:05:50 -06:00
Scott Lahteine
60adc6ff02
Display filwidth ratio in terms of E mm
2017-11-18 07:01:49 -06:00
Scott Lahteine
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks
...
[2.0] No retroactive adjustment with M851 Z
2017-11-18 04:49:53 -06:00
Scott Lahteine
3bba7d60f3
No retroactive changes with M851 Z
...
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.
To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.
It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.
One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.
Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
2017-11-18 03:36:39 -06:00
Scott Lahteine
32512332df
Apply some formatting
2017-11-18 03:12:30 -06:00
Scott Lahteine
50f09cc029
Miscellaneous cleanup
2017-11-16 00:47:16 -06:00
Scott Lahteine
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines
...
[2.0] Fix 'M32 P' subroutines
2017-11-15 01:15:02 -06:00
Scott Lahteine
e0d367f1fb
Fix M32 P subroutine handling
2017-11-15 00:44:21 -06:00
Scott Lahteine
2c8c30437e
Fix parser parameter value handling
2017-11-14 23:20:33 -06:00
Scott Lahteine
e70b44dc0b
Make sure leveled[] is defined for later use
2017-11-14 02:13:38 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
...
[2.0] Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7
Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:03:17 -06:00
Scott Lahteine
91baca6abb
Patches for compiler warnings/errors
2017-11-13 04:43:47 -06:00
Scott Lahteine
2f73dec077
Apply native workspace fixes for G92, G53-59
2017-11-13 02:09:12 -06:00
Scott Lahteine
04abd8d459
Improve and clarify M428 code
2017-11-13 02:09:11 -06:00
Scott Lahteine
e8e92f8969
No leveling data in M114 if no leveling is enabled
2017-11-12 23:03:38 -06:00
Scott Lahteine
c938273bd5
Coding standard patch of M290
2017-11-11 22:14:21 -06:00
Scott Lahteine
98c1265e3b
Disable laser power when PWM goes to 0
2017-11-11 22:00:22 -06:00
Scott Lahteine
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600
...
[2.0.x] Normalize load/unload length in M600
2017-11-10 19:44:08 -06:00
Scott Lahteine
1ed86adf9c
Cleanup around updatePID
2017-11-10 19:27:34 -06:00
LVD-AC
e334efb2a7
PROBE_MANUALLY etc.
2017-11-10 19:27:33 -06:00
Scott Lahteine
cba9c1cf9e
Add pre-calculated planner.e_factor
2017-11-10 03:14:24 -06:00
Scott Lahteine
c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height
...
[2.0.x] Add delta_height variable in lieu of using home_offset
2017-11-09 01:21:53 -06:00
Scott Lahteine
0cfb936dd1
Clarify some motion code
2017-11-08 22:15:55 -06:00
Thomas Moore
f34c3597dc
Add delta_height variable in lieu of using home_offset
2017-11-08 22:10:08 -06:00
Scott Lahteine
e6788bb6ae
Fix get_destination_from_command for E
2017-11-08 12:54:00 -06:00
Scott Lahteine
82f45c3e6a
Patch G33 misuse of PROBE_MANUALLY
2017-11-08 00:36:06 -06:00
