Commit graph

1550 commits

Author SHA1 Message Date
MagoKimbra 0ebf896070 Add 4th extruder 2015-01-23 23:13:06 +01:00
Scott Lahteine 54d5b52a2e Merge pull request #1399 from beanz/use-bed-defines-not-extruder-ones
Code wont compile with extruder but without bed runaway protection defined.
2015-01-23 08:36:25 -08:00
Mark Hindess 0ce252ba7a This ifdef is for bed code so should use bed constants for testing.
Without this fix, the code wont compile with extruder but without bed
runaway protection defined.
2015-01-23 16:30:13 +00:00
Scott Lahteine 9040446780 Merge pull request #1395 from AnHardt/iss1394
removed function step_wait() from stepper.cpp
2015-01-23 06:58:10 -08:00
Scott Lahteine 25f79c5010 Merge pull request #1391 from CONSULitAS/Development-newBoard_K8200
Add: Board for Vellemann K8200 (derived from 3Drag)
2015-01-23 06:08:38 -08:00
Scott Lahteine 9ce75ab7de Merge pull request #1386 from roglio/Development
Fixing a build error for melzi and gfx display
2015-01-23 06:00:24 -08:00
Scott Lahteine 15a00a5a7c Add 1µs delay in other appropriate spots 2015-01-23 03:24:45 -08:00
AnHardt 23cb899c5a removed function step_wait() from stepper.cpp
removed function step_wait() from stepper.cpp because its used nowhere.
2015-01-21 16:30:45 +01:00
Scott Lahteine d9d4a78e0f Add proper delay in stepper.cpp
Issue #1385 describes a delay that the compiler is optimizing out and
this solution.
2015-01-21 01:51:29 -08:00
CONSULitAS d1322dafc9 Add: Example Configuration for Vellemann K8200 - based on new BOARD_K8200 #1391
# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391

* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag, too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well
2015-01-20 23:13:44 +01:00
CONSULitAS 3b50a5e2e6 Add: Board for Vellemann K8200 (derived from 3Drag)
## Add: Board for Vellemann K8200 (derived from 3Drag)

* Boards.h: updated comment for board 3Drag - K8200 removed
* Boards.h: added `BOARD_K8200` with ID 78

* language.h.: machine name and firmware URL for new board

* pins.h: added `K8200` to any `#if` with `3Drag` and corresponding
comments
2015-01-20 20:46:20 +01:00
Scott Lahteine 4f35de991a Merge pull request #1383 from CONSULitAS/Development
Update Boards.h for Vellemann K8200 - comment only
2015-01-19 15:59:38 -08:00
roglio 22571ca13d Revert "Configuration for Aurora Z605"
This reverts commit 935ee968a7.
2015-01-19 15:02:11 +01:00
roglio 935ee968a7 Configuration for Aurora Z605
Still not fine tuned but working.
2015-01-19 11:18:52 +01:00
roglio ccdbeda526 Fixing a build error for melzi and gfx display
When a melzi board and a full gfx are both selected, the build fails
blaming for some missing defines.

This is a fix for the issue: now my configuration works.
2015-01-19 10:43:26 +01:00
CONSULitAS e13f159343 Update Boards.h for Vellemann K8200 - comment only
## Update Boards.h for Vellemann K8200 - comment only

* Boards.h: updated comment for board 3Drag - K8200 uses same board
2015-01-19 00:53:17 +01:00
CONSULitAS 51c7f2fd5a Revert "## Add: Example Configuration for Vellemann K8200"
This reverts commit 5333590ac2.
2015-01-19 00:37:57 +01:00
CONSULitAS 5333590ac2 ## Add: Example Configuration for Vellemann K8200
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)

* K8200/language.h: updated machine name and URL for K8200

* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch

* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well
2015-01-19 00:28:55 +01:00
Denis Chertykov ba3ac40b9d Remove hardcoded programmer option (-cwiring). Use variable AVRDUDE_PROGRAMMER.
Change default value of AVRDUDE_PROGRAMMER to 'wiring'.
2015-01-18 20:18:43 +03:00
daid 53f971095d Revert "Reduce PROGMEM warnings" 2015-01-16 16:48:22 +01:00
PxT 67b597ad46 Update printrboard pin assignments
Backported from Printrbot branch, allows the fan to work correctly.
2015-01-15 19:48:40 -08:00
galexander1 d4880a9e60 Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
Bo Herrmannsen ccdb086fc8 Merge pull request #1363 from PxT/patch-1
Fixes #1361
2015-01-15 10:57:44 +01:00
Bo Herrmannsen 5151db5c2f Merge pull request #1349 from msutas/patch-2
Improvement - G29 Option for Not Retracting Servo
2015-01-15 10:56:31 +01:00
Bo Herrmannsen 1746b2582b Merge pull request #1332 from Sniffle/Development
Rambo FAN_PIN documentation and servo support
2015-01-15 10:56:17 +01:00
Bo Herrmannsen 4b51b5a46d Merge pull request #1357 from odewdney/SDlib
Move Sd library out into library
2015-01-15 10:56:07 +01:00
Bo Herrmannsen f2cb4a3655 Merge pull request #1353 from thawkins/Development
fix avrdude upload in makefile
2015-01-15 10:55:33 +01:00
PxT 9fd4292923 Fixes #1361 2015-01-13 10:59:50 -08:00
odewdney f84ff4ba7d Move SD Fat library out of main src 2015-01-13 13:31:55 +00:00
Bo Herrmannsen ab074dac17 Merge pull request #1344 from grob6000/independent_pid
Independent PID parameters for each extruder
2015-01-13 12:10:37 +01:00
Bo Herrmannsen d4a665694a Merge pull request #1350 from odewdney/Development
Reduce PROGMEM warnings
2015-01-13 11:26:50 +01:00
odewdney 9d9c859ac1 First move of SdFat library 2015-01-13 08:04:32 +00:00
Tim Hawkins 5045d17a39 fix avrdude upload in makefile 2015-01-13 13:01:43 +08:00
msutas 3a5a6f42fb Corrected the ABL grid option
G29 E was not retracting the probe on the last probe point when used with ABL grid. Corrected.
2015-01-12 11:07:46 +02:00
odewdney cd55a93a13 re-add blank line 2015-01-11 19:22:35 +00:00
odewdney 23bfe30036 moved include themister to temperature.c 2015-01-11 18:18:32 +00:00
odewdney 538859669d Removing compiler warnings for progmem 2015-01-11 18:14:21 +00:00
grob6000 bf2c923db5 Make multiple PID parameters a config option
* Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID
parameters to be used where this would be preferable (e.g. dual
identical extruders)
* When disabled, will use `float Kp, Ki, Kd, Kc;` as before.
Preprocessor macros used to switch between.
* ultralcd.cpp defines extra menus for extra parameters only where
required
* M301 reports `e:xx` only if independent pid parameters enabled
* EEPROM structure still leaves space for 3 extruders worth, when undef
will save single parameter to all extruder positions, but only read the
first
* Switching off saves approx 330 B with no LCD enabled, 2634B with LCD
(RRD) enabled: this is significant.
* LCD modifications should be tested.
2015-01-11 13:50:17 +11:00
grob6000 0877aa0fe0 Merge remote-tracking branch 'upstream/Development' into independent_pid 2015-01-11 11:32:58 +11:00
msutas e0beb98fd3 Improvement - G29 Option for Not Retracting Servo
This change introduces an improvement to G29 command on Marlin.

Auto bed leveling operation's reliability is based on the repeatability of the Z-probe switch and the servo. This change introduces an option to G29 command. When the G29 command is sent with an "e" option, during auto bed levelling the servo is not retracted between probes which decreases the bias on auto bed levelling resulting from servo.

G29 command does the auto bed probing as it is.

G29 E command engages the servo on first probing point, probes all points and retracts the servo after probing the last point.

Please comment your opinions, test on your printer and check the code on a programmer's perspective. (I am not a good programmer.)
2015-01-10 17:25:39 +02:00
grob6000 7d32c7f36d Multiple PID parameter edit for ultralcd
* Depending on extruder count, will add menu items for ultralcd to edit
individual PID parameters for each extruder
* Added menu items to each language_xx.h
* Builds OK, but recommend testing with typical LCD
2015-01-11 01:14:02 +11:00
Steffen Vogel 69dc411ae0 Merge branch 'Development' of github.com:MarlinFirmware/Marlin into LogoLCD
Conflicts:
	Marlin/dogm_lcd_implementation.h
2015-01-10 14:57:11 +01:00
grob6000 3e2af67ce3 Fix R-H compatibility
* R-H reads incorrect M301 line from EEPROM output if more than one is
present. Reverted to original output format, using only E0 value.
2015-01-10 16:44:28 +11:00
grob6000 37c7e8300f Independent PID parameters for each extruder
* Variables Kp, Ki, Kd, Kc now arrays of size EXTRUDERS
* M301 gains (optional, default=0) E parameter to define which
extruder's settings to modify. Tested, works with Repetier Host's EEPROM
config window, albeit only reads/updates settings for E0.
* All Kp, Ki, Kd, Kc parameters saved in EEPROM (version now v14), up to
3 extruders supported (same as Marlin in general)
2015-01-10 16:35:12 +11:00
Scott Lahteine 326b925557 DOGLCD and LCD_PROGRESS_BAR to coexist
Small changes (and formatting to confuse the diff’er) which first
allows DOGLCD and LCD_PROGRESS_BAR to be enabled in tandem, then a
#warning (rather than error) that the extra progress bar / message
options don’t apply to graphical displays at this time. This leaves
open perhaps combining the progress bar and message area in some future
(or forked custom) graphical LCD display arrangement (at which time the
relevant variables may be moved into ultralcd.cpp with externs in
ultralcd.h). I also added a conditional error that the progress bar and
the filament display may not work well together.
2015-01-09 18:16:56 -08:00
Erik van der Zalm 1aade4a8e2 Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Development 2015-01-09 21:33:29 +01:00
Erik van der Zalm 8a2e84e3f1 Possible fix for FWRETRACT with 0 zlift. 2015-01-09 21:33:02 +01:00
Steffen Vogel 905aab3b85 added missing #endif 2015-01-09 20:23:38 +01:00
Steffen Vogel b9cf1465a7 updated LCD bouts with new strings and bitmaps
new version is pretty generic and should work in most scenarios
2015-01-09 18:49:59 +01:00
Steffen Vogel c7632be5cc added high and low resolutions version of splash screen logo (saving code size) 2015-01-09 18:49:24 +01:00