zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
7030 commits 1 branch 0 tags 156 MiB
Commit graph

5803 commits

Author SHA1 Message Date
Scott Lahteine c15b9a6a06 No space after X: or A: in M114 output 2017-02-12 00:10:03 -06:00
Scott Lahteine e1702816f6 Fix SD_CHECK_AND_RETRY condition 
Addressing #5806
 2017-02-11 23:55:56 -06:00
Scott Lahteine 1bc5be3bdf Cast DELTA_PRINTABLE_RADIUS to float in sq() 
Addressing #5625
 2017-02-11 23:28:39 -06:00
Bob-the-Kuhn 0369f97ec1 guaranteed BLTouch detection 
To guarantee that the 5mS pulse from a BLTouch is recognized you need to
have the endstops.update() routine run twice in that 5mS period.

At 200 steps per mm, my system has problems  below a feedrate of 120 mm
per minute.

Two things were done to guarantee the two updates within 5mS:
1) In interrupt mode, a check was added to the temperature ISR.  If the
endstop interrupt flag/counter is active then it'll kick off the endstop
update routine every 1mS until the flag/counter is zero.  This
flag/counter is decremented by the temperature ISR AND by the stepper
ISR.

2) In poling mode, code was added to the stepper ISR that will make sure
the ISR runs about every 1.5mS.  The "extra" ISR runs only check the
endstops.  This was done by grabbing the intended ISR delay and, if it's
over 2.0mS, splitting the intended delay into multiple smaller delays.
The first delay can be up to 2.0mS, the next ones 1.5mS (as needed) and
the last no less than 0.5mS.

=========================================

BLTouch error state recovery

If BLTouch already active when deploying the probe then try to reset it
& clear the probe.

If that doesn't fix it then declare an error.

Also added BLTouch init routine to startup section
 2017-02-11 12:01:34 -06:00
Scott Lahteine 1e4d4e5915 Fix typo in language_uk 
Thanks to @pavlus for this one
 2017-02-10 15:34:31 -06:00
Scott Lahteine 7fe7a0c8be Merge pull request #5793 from thinkyhead/rc_adjust_probe_output 
Adjust probe_pt() terminal output to respect probe z-offset
 2017-02-09 23:05:02 -06:00
Scott Lahteine 633c253bc1 Merge pull request #5792 from thinkyhead/rc_default_dac_vals 
Default DAC values for RigidBoard V2
 2017-02-09 22:56:03 -06:00
Florian Heilmann 7bbc31704c Adjust probe_pt() terminal output to respect probe z-offset 2017-02-09 22:54:22 -06:00
Scott Lahteine a245656db3 Merge pull request #5713 from gege2b/RCBF-French 
French translation : Added missing strings as well as missing accents
 2017-02-09 22:43:56 -06:00
jaysonkelly 713931338a Default DAC values for RigidBoard V2 2017-02-09 22:39:00 -06:00
Bob-the-Kuhn ae706233a8 pinsDebug for 644/1284 & USB646/1286 families 
added conditional compilation for PWMs 1C & 3C

add Teensyduino compatibility

==========================================

changes per review - minor formatting changes

1) remove non-printable character at the end of line 687

2) split a really long comment into two lines

3) got rid of some trailing spaces

============================================

Made pinsDebug_Teensyduino.h the same between this PR and PR 5668 which
is for a re-written pinsDebug.h file.

The changes were:
1) added copyright @ GNU license header
2) a blank line crept in.
 2017-02-09 07:24:02 -06:00
Gege2B 22dfcc9a71 French translation : Added missing strings as well as missing accents 2017-01-17 23:29:23 +01:00
Scott Lahteine 9b5515926a Merge pull request #5696 from thinkyhead/rc_volumetric_default 
Allow enabling volumetric filament on config load
 2017-01-14 05:48:51 -08:00
Robert Kirk 0d147ead66 Allow enabling volumetric filament on config load 2017-01-14 04:37:49 -08:00
AnHardt fa26767efe Replace all remaining 'boolean' with 'bool' 2017-01-13 13:03:52 +01:00
AnHardt f6858d9974 Fix M110 without leading N 
Store N in the right variable.
This is too rarely used.

"mea culpa, mea culpa, mea maxima culpa"
 2017-01-13 12:33:50 +01:00
Scott Lahteine 0c0c840ba8 Merge pull request #5683 from emartinez167/EMartinez-Changes 
Updates to some incorrectly ended strings in the Spanish translation
 2017-01-12 07:49:15 -08:00
Kai 25dae3bccc Update language_de.h 
Small corrections
 2017-01-12 16:06:58 +01:00
emartinez167 7292145f4e Fix for some wrong strings 
On last commit, some strings were ended with the incorrect character.
This fixes it.
 2017-01-12 22:35:04 +08:00
Scott Lahteine 93a9aa6b76 Merge pull request #5682 from thinkyhead/rc_spanish_jan 
Updates to Spanish language
 2017-01-12 06:14:10 -08:00
Scott Lahteine 7a9c1a279b Merge pull request #5681 from thinkyhead/rc_prevent_boot_loop 
Reset watchdog in SD init to prevent reboot
 2017-01-12 06:13:56 -08:00
Scott Lahteine e409c7f9e8 Merge pull request #5645 from esenapaj/From-microseconds-to-milliseconds 
From "microseconds" to "milliseconds"
 2017-01-12 06:02:55 -08:00
emartinez167 020c6af7b0 Updates to Spanish language 
Add missing Spanish language definitions.
 2017-01-12 05:53:39 -08:00
Hans Raaf d29cc8f7bc Reset watchdog in SD init to prevent reboot 
If the watchdog is enabled and bootscreen + SD card checks take too long, Marlin may hang at boot time because of the reset loop. We have this happen all the time with the Anet board if no SD card is inserted.
 2017-01-12 05:33:38 -08:00
Scott Lahteine 7743849608 Merge pull request #5680 from thinkyhead/rc_configs_puhlease 
code_value_float tweak
 2017-01-12 05:22:47 -08:00
Scott Lahteine 16357fbfdf Merge pull request #5619 from Ocarthon/RCBugFix 
Disable SD Detect for K8400
 2017-01-12 05:22:03 -08:00
Scott Lahteine e57c0fce66 Move MOSFET changes above #include for RIGIDBOARD 
Correction to #5629
 2017-01-12 04:46:49 -08:00
Scott Lahteine c376f6a2cb code_value_float tweak 2017-01-12 04:38:09 -08:00
Scott Lahteine fb3c30e24c Fix lcd_wait_for_homing causing menu to block 
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
 2017-01-12 04:37:23 -08:00
Scott Lahteine f8ae0fd29f Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix 
Fix empty Prepare menu
 2017-01-12 04:20:18 -08:00
Robert Kirk aab5118c6a Remove error causing break command 
Use index macro instead of e
 2017-01-01 17:47:01 -05:00
esenapaj d38e335272 From "microseconds" to "milliseconds" 
delay() is milliseconds
 2017-01-02 01:19:33 +09:00
Philip Standt 8ae2bc7e2e Disable SD Detect for K8400 2016-12-28 23:21:18 +01:00
Scott Lahteine 4061fca1ad Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT 2016-12-23 19:55:12 -08:00
Scott Lahteine 5ab7b91615 Comment on filament runout sensor config 2016-12-23 19:50:27 -08:00
Scott Lahteine 922c67f17d Merge pull request #5588 from thinkyhead/rc_remove_biv25 
Drop biv2.5 delta configurations
 2016-12-23 19:14:50 -08:00
Scott Lahteine 8c6c048551 drop biv2.5 delta configurations 2016-12-23 18:56:07 -08:00
Scott Lahteine 92dbeebf40 Define ADV_NEVER, ADV_RATE 2016-12-23 18:43:23 -08:00
Robert Kirk 306c184b1a Allow M600 when dryrun debugging 2016-12-21 20:30:51 -05:00
Scott Lahteine fe2ea2906f Merge pull request #5573 from thinkyhead/rc_unify_stepper_isr 
LIN_ADVANCE with unified stepper ISR
 2016-12-21 02:53:32 -08:00
Sebastianv650 84c685f8b5 First draft of Unified Stepper / E Advance ISR 2016-12-21 01:34:39 -08:00
Scott Lahteine 83021d82c6 Merge pull request #5502 from AnHardt/symbol-strings 
Add symbol-strings
 2016-12-21 00:51:59 -08:00
Scott Lahteine 036eccfd6e Merge pull request #5572 from Kaibob2/patch-5 
Update language_de.h
 2016-12-21 00:50:40 -08:00
Scott Lahteine b794b76836 Merge pull request #5567 from AnHardt/fix5194 
Fix 5194
 2016-12-21 00:49:52 -08:00
Scott Lahteine 451ba5df01 Merge pull request #5516 from esenapaj/Suppress-warning 
Suppress warning
 2016-12-21 00:00:35 -08:00
Scott Lahteine 92dbc63949 Merge pull request #5571 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-12-20 23:59:55 -08:00
Kai ade72535c4 Update language_de.h 
Added tarnslation for
```
#define MSG_DEBUG_MENU 
#define MSG_PROGRESS_BAR_TEST
```
 2016-12-21 08:57:39 +01:00
esenapaj ab6b005867 Suppress warning 2016-12-21 09:13:03 +09:00
AnHardt 61f15ef7e7 Fix 5194 
I have been a bit too radical in cleaning up this section.
 2016-12-21 00:45:29 +01:00
esenapaj 60515ff700 Update Japanese translation 
・Add new translation
 2016-12-21 08:44:07 +09:00
Scott Lahteine 1e419655f3 Followup to #5550 - spacing before "mm" 2016-12-20 02:27:54 -08:00
Scott Lahteine 1a26ce1cdc Merge pull request #5550 from FHeilmann/patch-2 
Allow negative retract values in the LCD
 2016-12-20 02:10:22 -08:00
Scott Lahteine bec30c89e7 Merge pull request #5522 from esenapaj/Add-description-for-dual-x 
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
 2016-12-20 01:31:53 -08:00
Scott Lahteine 7739c0affa Change "+mm" to "mm" in most languages 
- Japanese and Chinese still need update
 2016-12-20 01:16:51 -08:00
Scott Lahteine 1cba425308 Allow negative recover-swap length from LCD 2016-12-20 01:16:08 -08:00
Scott Lahteine 298a8c6a3c Merge pull request #5561 from thinkyhead/rc_no_case_light 
Support for M335 case light "no case light"
 2016-12-20 01:06:59 -08:00
Scott Lahteine 644f45cbd8 Merge pull request #5563 from akaJes/m600 
FILAMENT_CHANGE_FEATURE allowed in idle mode
 2016-12-20 01:06:10 -08:00
Scott Lahteine 0d2fc13516 Place "Level Bed" closer to "Auto Home" 2016-12-20 00:51:03 -08:00
Scott Lahteine b031d28ebf Encoder events should not skip stripes 2016-12-20 00:21:51 -08:00
Scott Lahteine 22881f38b9 Fix updating of "bool" menu items 2016-12-20 00:21:51 -08:00
Scott Lahteine eb68715b94 No "Cooldown" menu if heaters are off 2016-12-20 00:21:51 -08:00
Jesus 4ed976b5ff m600 fixes 2016-12-20 09:47:46 +02:00
Damien 4e2639942b Support for M335 case light "no case light" 2016-12-19 23:23:08 -08:00
Scott Lahteine 18ba31e9b5 Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example 2016-12-19 22:57:14 -08:00
Scott Lahteine 03af5961b0 Hide (or remove) custom character change on boot screen 2016-12-19 22:27:28 -08:00
Scott Lahteine 1642f5ed31 Add macro to some en strings 2016-12-19 22:27:28 -08:00
Scott Lahteine dbb2d56c89 Correct comment on watchdog timer 2016-12-19 22:27:28 -08:00
Scott Lahteine 41a30923f3 Merge pull request #5559 from thinkyhead/rc_minimum_gcc_version 
Throw an error for gcc before 4.7
 2016-12-19 19:50:44 -08:00
Scott Lahteine 6d6a1db6ec Apply const to _EEPROM_writeData value param 2016-12-19 18:50:43 -08:00
Robert Kirk f724ef5820 Have bed leveling status output current status, not requested. 2016-12-19 18:47:45 -08:00
Scott Lahteine 20218e553d Merge pull request #5527 from MagoKimbra/rc_configuration_store_fix_size 
Fix size
 2016-12-19 18:47:28 -08:00
Scott Lahteine dcfbe2bd3c Throw an error for gcc before 4.7 2016-12-19 18:30:51 -08:00
Scott Lahteine 82fde7df2e Merge pull request #5512 from AnHardt/speed-compare-bbr 
Optimize handling of block_buffer_runtime()
 2016-12-19 18:21:06 -08:00
Scott Lahteine 8986225752 Spacing, cleanup in speed_lookuptable.h 2016-12-19 14:52:45 -08:00
Scott Lahteine e12c8e5cac Split up thermistor tables 2016-12-19 14:47:54 -08:00
Florian Heilmann a7334fd2a0 Allow negative retract values in the LCD 
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
 2016-12-19 14:19:06 +01:00
AnHardt 292eb365c6 Optimize handling of block_buffer_runtime() 
millis_t is long - divisions take for ever.

Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)

That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
 2016-12-19 11:47:28 +01:00
esenapaj 6854f44bf2 Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE 2016-12-19 02:21:10 +09:00
Scott Lahteine 3f6f036f7c Merge pull request #5524 from thinkyhead/rc_optional_dogm_splitup 
Report EEPROM data size, not final index
 2016-12-16 18:55:48 -08:00
MagoKimbra 86ba7e4542 Fix size 
Fix size for writeData and readData.
For bilinear grid 11 x 11 for example, size is 4 (float) x 11 x 11 = 484. uint8_t max is 255.
 2016-12-16 14:49:33 +01:00
Scott Lahteine f9f75c8016 Fix USE_RAW_KINEMATICS in prepare_kinematic_move_to 2016-12-15 23:15:38 -08:00
Scott Lahteine 87921f390a Clarify what are "logical" positions in the planner 2016-12-15 23:15:38 -08:00
Scott Lahteine a4f10f59c3 Write the E parameter length correctly 2016-12-15 23:15:38 -08:00
Scott Lahteine 2e904cb4f9 Merge pull request #5514 from esenapaj/Update-Japanese-translation 
Update Japanese translation
 2016-12-15 21:38:40 -08:00
Scott Lahteine 0b6817e0f9 Merge pull request #5505 from android444/patch-4 
Update for translations language_pl.h
 2016-12-15 21:38:18 -08:00
Scott Lahteine 3bd76f60e4 Report EEPROM data size, not final index 2016-12-15 20:26:28 -08:00
Scott Lahteine 78d6d6e076 Merge pull request #5452 from thinkyhead/rc_save_your_mesh 
Save Bed Leveling to EEPROM
 2016-12-15 20:23:01 -08:00
Scott Lahteine 0d0aa6c20d Patch type for max_acceleration_mm_per_s2 save/restore 2016-12-15 20:05:42 -08:00
Scott Lahteine d4f5418802 Merge pull request #5517 from esenapaj/Fix-for-PR-#5255 
Fix for the PR #5255 (Case light menu (3rd attempt))
 2016-12-15 20:01:22 -08:00
Scott Lahteine fa7010b0a1 Merge pull request #5515 from esenapaj/Remove-unnecessary-tabs-and-spaces 
Remove unnecessary tabs and spaces
 2016-12-15 19:58:32 -08:00
Scott Lahteine 6d7b1cdf6c Add M421 for ABL Bilinear 2016-12-15 19:39:11 -08:00
Scott Lahteine 32e65dc429 Extend M420 to print state and, with V, the matrix / mesh 2016-12-15 19:39:11 -08:00
Scott Lahteine d04258753b Don't throw away the bed level matrix on G28 2016-12-15 19:21:18 -08:00
Scott Lahteine 8f0f225d10 Save ABL Planar Matrix to EEPROM 2016-12-15 19:21:15 -08:00
Scott Lahteine e2429a9da1 Generalize Bed Leveling flag in EEPROM 2016-12-15 19:20:52 -08:00
Scott Lahteine e42fd7813a Save ABL Bilinear Grid to EEPROM 2016-12-15 19:20:48 -08:00
Scott Lahteine 492b68f8e3 Better EEPROM read/write error handling 2016-12-15 19:08:44 -08:00
Scott Lahteine 55722c09da Use "UNPROBED" for un-probed bed_level_grid points 2016-12-15 19:08:44 -08:00
Scott Lahteine 2643404ac8 Throw an error in M420 if can't enable 2016-12-15 19:08:43 -08:00
Scott Lahteine b1539394fd Use planner.unapply_leveling to undo tilt in G29 2016-12-15 19:08:43 -08:00