zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
2219 commits 1 branch 0 tags 156 MiB
Commit graph

1772 commits

Author SHA1 Message Date
AnHardt 7a32b742f3 MSG_SWITCH_PS_ON = 'Switch Power On' ->'Netzteil Ein' 2015-01-29 11:50:51 +01:00
AnHardt 4e176d2ce8 MSG_SET_ORIGIN = 'Setze Nullpunkt' ->'Setze Null hier' 2015-01-29 11:45:18 +01:00
AnHardt 1f8c8ad3ed MSG_SET_HOME_OFFSETS = 'Set home offsets' ->'Setze Home hier' 2015-01-29 11:39:35 +01:00
AnHardt 0e8836ce5e MSG_AUTO_HOME = 'Auto Nullpunkt' ->'Home' 2015-01-29 11:36:07 +01:00
AnHardt 56d3e6615d MSG_DISABLE_STEPPERS = 'Stepper abschalt.' -> 'Motoren Aus'# 2015-01-29 11:19:10 +01:00
Scott Lahteine 1258980832 Merge pull request #1429 from bq/Development 
Add bq Witbox 3D printer
 2015-01-29 01:14:18 -08:00
Victor Andueza 766762a4dc Change url link 2015-01-29 09:28:50 +01:00
Scott Lahteine 7df9ca051c Merge pull request #1428 from thinkyhead/issue_1388_eeprom 
Make EEPROM storage consistent
 2015-01-28 22:58:04 -08:00
Scott Lahteine fe3810f073 yeah, what he said 2015-01-28 22:27:15 -08:00
Scott Lahteine 6137bbd484 use eeprom read correctly 2015-01-28 22:10:31 -08:00
Scott Lahteine 9bc9051405 Flag EEPROM write errors on serial output 
- Also adds a language string for the error.
- Also adds SERIAL_EOL as an alias for SERIAL_ECHOLN(“”)
 2015-01-28 21:19:51 -08:00
Scott Lahteine ff99ca3040 Fix alignment of Restore following PIDTEMP 
Should be reading 4 x 4 PID values instead of 4 x 3
 2015-01-28 20:48:32 -08:00
Philip Schell 6c285930cb Fixing wrong pin to heater extruder 2 <-> 3 
Extruder 2 and 3 was swapped
 2015-01-28 23:57:22 +01:00
Victor Andueza 0d4ce27b79 Add pins_WITBOX file 2015-01-28 17:26:50 +01:00
Victor Andueza 13118cde33 Add bq Witbox 3D printer 2015-01-28 16:52:36 +01:00
Scott Lahteine 093fedfde8 Make EEPROM storage consistent 
Update ConfigurationStore to always write dummy values for disabled
options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM
version to “V15.” Also fixes a buffer overrun with axis_scaling in
Config_ResetDefault.
 2015-01-28 01:08:48 -08:00
Scott Lahteine 34377ee512 Merge pull request #1427 from thinkyhead/fewer_preheat_strings 
Remove language strings that only add a number
 2015-01-27 22:10:08 -08:00
Scott Lahteine 7378a7fef4 Merge pull request #1408 from thinkyhead/cleanup_servo 
Formatting cleanup of quiet sources
 2015-01-27 22:09:04 -08:00
Scott Lahteine 5fbef6bed2 Merge pull request #1409 from thinkyhead/rename_lastnr 
Rename lastnr to autostart_index and...
 2015-01-27 22:07:23 -08:00
Scott Lahteine 53eea611b8 Fix MSG_NOZZLE 2015-01-27 22:00:32 -08:00
Scott Lahteine d7211a5324 Changes for Portuguese too 2015-01-27 21:53:08 -08:00
Scott Lahteine 0a21727c0a Portuguese (pt) and Brazilian Portuguese (pt-br) 2015-01-27 21:45:21 -08:00
Scott Lahteine c90f2e77d8 Remove language strings that only add a number 
This won’t reduce the string storage in the end, but it makes the
language files smaller. Also removed remaining unused strings.
 2015-01-27 21:36:58 -08:00
Scott Lahteine 2ce4a102ee Add support for Megatronics 3 a la #1426 2015-01-27 15:54:46 -08:00
Scott Lahteine ae4b348d77 Make sure _Ex_PINS is defined 
Also fix analogInputToDigitalPin so it uses proper C hex notation
 2015-01-27 15:36:47 -08:00
Scott Lahteine 80be6f3f91 tweak tweak 2015-01-27 15:36:47 -08:00
Scott Lahteine ebe78cb36f tweak 2015-01-27 15:36:47 -08:00
Scott Lahteine 82474fef8a Max endstop pins disabled by configuration 
There’s no need to ask users to uncomment Max Endstop pins when they
have them. These will be set to -1 later if the endstop option is
disabled.
 2015-01-27 15:33:21 -08:00
Scott Lahteine 8045e4d60d Add support for 4th extruder 
#1405 includes some changes to pins.h for a 4th extruder. This commit
applies those changes. It also deals with a possible problem with
SENSITIVE_PINS.
 2015-01-27 15:33:21 -08:00
Scott Lahteine df4f3e7712 cleanup 2015-01-27 15:32:34 -08:00
Scott Lahteine b6ecbd8cc4 cleanup 2015-01-27 15:32:34 -08:00
Scott Lahteine 4e573134de Cleanup heading 2015-01-27 15:32:34 -08:00
Scott Lahteine 574a5ab72a Split up pins to make it more manageable 
Hopefully this is helpful to organization and future expansion….
 2015-01-27 15:32:34 -08:00
clefranc d55c62bf9f Update ConfigurationStore.cpp 
Moved #endif to allow filament settings to print.
 2015-01-27 13:28:37 -05:00
clefranc e779641c73 Update ConfigurationStore.cpp 
Added PIDTEMP dummy write to align EEPROM read/write operation.
 2015-01-27 13:25:47 -05:00
Scott Lahteine baac6e242d Merge pull request #1419 from AnHardt/bootsplash 
repair Bootsplash
 2015-01-27 00:30:29 -08:00
AnHardt 75cf302da3 example configurations changed to meet Configuration.h 2015-01-27 00:01:33 +01:00
Philip Schell 61fd45a0c2 Add 4th extruder 2015-01-26 21:22:00 +01:00
Philip Schell 2650be4921 Add 4th extruder 2015-01-26 21:21:31 +01:00
Philip Schell a9763d894e Add 4th extruder 2015-01-26 21:20:56 +01:00
Philip Schell 4949088302 Add 4th extruder 2015-01-26 21:20:04 +01:00
Philip Schell fc5204bd42 Add 4th extruder 2015-01-26 21:17:35 +01:00
Philip Schell 9834818ef7 Add 4th extruder 2015-01-26 21:16:23 +01:00
Philip Schell 8696963154 Add 4th extruder 2015-01-26 21:15:24 +01:00
Philip Schell ee8a7419f4 Add 4th extruder 2015-01-26 21:14:18 +01:00
Philip Schell e18403235d Add 4th extruder 2015-01-26 21:12:55 +01:00
Philip Schell 7baee555f4 Add 4th extruder 2015-01-26 21:11:49 +01:00
Philip Schell cebc7daf2a Add 4th extruder 2015-01-26 21:10:42 +01:00
Philip Schell ef4c7abb21 Update language_es.h 
Add 4th extruder
 2015-01-26 21:09:24 +01:00
Philip Schell 22e591518a Update language_de.h 
Add 4th extruder
 2015-01-26 21:08:13 +01:00
Philip Schell a20c35bb38 Update language_ca.h 
Add 4th extruder
 2015-01-26 21:04:31 +01:00
Jérémie FRANCOIS dd301be52d Added suport for multiline G-code commands in the LCD menus 2015-01-26 18:50:29 +01:00
AnHardt aa48056c03 Made centering of bootlogo work and removed contraproductiv setScale2x2() in dogm_lcd_implementation.h 2015-01-26 17:26:22 +01:00
AnHardt 0d219b3e14 Make centering of STRING_SPLASH work 2015-01-26 16:00:10 +01:00
AnHardt 59315330dd Remove definition of VERSION_STRING and replace where usend with STRING_VERSION 2015-01-26 15:52:01 +01:00
AnHardt 8c792c7b22 Make STRING_VERSION and VERSION_STRING the same 2015-01-26 15:40:44 +01:00
Scott Lahteine 865ca0ef04 Merge pull request #1405 from MagoKimbra/4th-extruders 
All the additions look proper. I can't think of any other extruder-count-related items that you might have missed. So, with some optimism, I will merge this for testing.
 2015-01-25 19:30:51 -08:00
MagoKimbra 3021f7f743 Fix PID_dT 
Add PID_dT in temeprature.cpp
 2015-01-25 17:56:14 +01:00
Scott Lahteine a7b02975b7 No TEMP1 or TEMP2 pins for TEENSYLU || PRINTRBOARD 
Pins 2 and 3 are probably general-use pins, since the filament sensor
uses pin 2.
 2015-01-24 05:10:48 -08:00
Scott Lahteine 6723388f7f Proposed fix to #1379. Printrboard I2C LCD support 2015-01-24 05:01:02 -08:00
Scott Lahteine 03c9cb60e8 Rename lastnr to autostart_index and... 
Replace instances of the number 13 with FILENAME_LENGTH where
appropriate.
 2015-01-24 04:57:44 -08:00
MagoKimbra ef5959a705 Fix Temperature 
Githun insert this line when i merge with actual Branch development...
 2015-01-24 13:49:29 +01:00
MagoKimbra 3d4ee6c868 Merge branch '4th-extruders' of https://github.com/MagoKimbra/Marlin into 4th-extruders 
Conflicts:
	Marlin/temperature.cpp
 2015-01-24 13:41:15 +01:00
MagoKimbra 986e723eeb Add 4th extruder 2015-01-24 13:37:58 +01:00
Scott Lahteine f16bdd2ff2 Borrow from Ultimaker to fix MAX6675 SPI conflict 
Changes to temperature.cpp from Ultimaker fork, intended to address
#1226 and #1227
 2015-01-24 03:49:15 -08:00
Scott Lahteine 06c3b37933 Formatting cleanup of quiet sources 
Formatting for code-folding plus minor style changes to less active
code.
 2015-01-23 22:26:52 -08:00
Scott Lahteine 23fcd1ecb2 Merge pull request #1407 from thinkyhead/cleanup_marlinserial 
Formatting cleanup of quiet sources
 2015-01-23 21:33:43 -08:00
Scott Lahteine fd78902194 Formatting cleanup of quiet sources 2015-01-23 21:11:50 -08:00
Scott Lahteine 5c1814383a Merge pull request #1390 from floyd871/Development 
Show Custom M_Code for Z-Probe Offset when entering M503
 2015-01-23 20:08:23 -08:00
MagoKimbra 0ebf896070 Add 4th extruder 2015-01-23 23:13:06 +01:00
Michael Neumann a9d7ab9530 Update ConfigurationStore.cpp 
Done
 2015-01-23 21:05:27 +01:00
Scott Lahteine 3a9a3e5ed8 Fix Issue #1356 – remove EXTRUDER1_Z_OFFSET 
This define is not used.
 2015-01-23 10:51:06 -08:00
Scott Lahteine 54d5b52a2e Merge pull request #1399 from beanz/use-bed-defines-not-extruder-ones 
Code wont compile with extruder but without bed runaway protection defined.
 2015-01-23 08:36:25 -08:00
Mark Hindess 0ce252ba7a This ifdef is for bed code so should use bed constants for testing. 
Without this fix, the code wont compile with extruder but without bed
runaway protection defined.
 2015-01-23 16:30:13 +00:00
Scott Lahteine 9040446780 Merge pull request #1395 from AnHardt/iss1394 
removed function step_wait() from stepper.cpp
 2015-01-23 06:58:10 -08:00
Scott Lahteine 25f79c5010 Merge pull request #1391 from CONSULitAS/Development-newBoard_K8200 
Add: Board for Vellemann K8200 (derived from 3Drag)
 2015-01-23 06:08:38 -08:00
Scott Lahteine 9ce75ab7de Merge pull request #1386 from roglio/Development 
Fixing a build error for melzi and gfx display
 2015-01-23 06:00:24 -08:00
Scott Lahteine 15a00a5a7c Add 1µs delay in other appropriate spots 2015-01-23 03:24:45 -08:00
AnHardt 23cb899c5a removed function step_wait() from stepper.cpp 
removed function step_wait() from stepper.cpp because its used nowhere.
 2015-01-21 16:30:45 +01:00
Scott Lahteine d9d4a78e0f Add proper delay in stepper.cpp 
Issue #1385 describes a delay that the compiler is optimizing out and
this solution.
 2015-01-21 01:51:29 -08:00
CONSULitAS d1322dafc9 Add: Example Configuration for Vellemann K8200 - based on new BOARD_K8200 #1391 
# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391

* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag, too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well
 2015-01-20 23:13:44 +01:00
CONSULitAS 3b50a5e2e6 Add: Board for Vellemann K8200 (derived from 3Drag) 
## Add: Board for Vellemann K8200 (derived from 3Drag)

* Boards.h: updated comment for board 3Drag - K8200 removed
* Boards.h: added `BOARD_K8200` with ID 78

* language.h.: machine name and firmware URL for new board

* pins.h: added `K8200` to any `#if` with `3Drag` and corresponding
comments
 2015-01-20 20:46:20 +01:00
Michael Neumann 2d454da3af Update ConfigurationStore.cpp 
Show Custom M Code when entering M503
 2015-01-20 16:21:44 +01:00
Scott Lahteine 4f35de991a Merge pull request #1383 from CONSULitAS/Development 
Update Boards.h for Vellemann K8200 - comment only
 2015-01-19 15:59:38 -08:00
roglio 22571ca13d Revert "Configuration for Aurora Z605" 
This reverts commit 935ee968a7.
 2015-01-19 15:02:11 +01:00
roglio 935ee968a7 Configuration for Aurora Z605 
Still not fine tuned but working.
 2015-01-19 11:18:52 +01:00
roglio ccdbeda526 Fixing a build error for melzi and gfx display 
When a melzi board and a full gfx are both selected, the build fails
blaming for some missing defines.

This is a fix for the issue: now my configuration works.
 2015-01-19 10:43:26 +01:00
CONSULitAS e13f159343 Update Boards.h for Vellemann K8200 - comment only 
## Update Boards.h for Vellemann K8200 - comment only

* Boards.h: updated comment for board 3Drag - K8200 uses same board
 2015-01-19 00:53:17 +01:00
CONSULitAS 51c7f2fd5a Revert "## Add: Example Configuration for Vellemann K8200" 
This reverts commit 5333590ac2.
 2015-01-19 00:37:57 +01:00
CONSULitAS 5333590ac2 ## Add: Example Configuration for Vellemann K8200 
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)

* K8200/language.h: updated machine name and URL for K8200

* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch

* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well
 2015-01-19 00:28:55 +01:00
Denis Chertykov ba3ac40b9d Remove hardcoded programmer option (-cwiring). Use variable AVRDUDE_PROGRAMMER. 
Change default value of AVRDUDE_PROGRAMMER to 'wiring'.
 2015-01-18 20:18:43 +03:00
daid 53f971095d Revert "Reduce PROGMEM warnings" 2015-01-16 16:48:22 +01:00
PxT 67b597ad46 Update printrboard pin assignments 
Backported from Printrbot branch, allows the fan to work correctly.
 2015-01-15 19:48:40 -08:00
galexander1 d4880a9e60 Revert "Move Sd library out into library" 2015-01-15 18:52:10 -05:00
Bo Herrmannsen ccdb086fc8 Merge pull request #1363 from PxT/patch-1 
Fixes #1361
 2015-01-15 10:57:44 +01:00
Bo Herrmannsen 5151db5c2f Merge pull request #1349 from msutas/patch-2 
Improvement - G29 Option for Not Retracting Servo
 2015-01-15 10:56:31 +01:00
Bo Herrmannsen 1746b2582b Merge pull request #1332 from Sniffle/Development 
Rambo FAN_PIN documentation and servo support
 2015-01-15 10:56:17 +01:00
Bo Herrmannsen 4b51b5a46d Merge pull request #1357 from odewdney/SDlib 
Move Sd library out into library
 2015-01-15 10:56:07 +01:00
Bo Herrmannsen f2cb4a3655 Merge pull request #1353 from thawkins/Development 
fix avrdude upload in makefile
 2015-01-15 10:55:33 +01:00
PxT 9fd4292923 Fixes #1361 2015-01-13 10:59:50 -08:00
odewdney f84ff4ba7d Move SD Fat library out of main src 2015-01-13 13:31:55 +00:00
Bo Herrmannsen ab074dac17 Merge pull request #1344 from grob6000/independent_pid 
Independent PID parameters for each extruder
 2015-01-13 12:10:37 +01:00
Bo Herrmannsen d4a665694a Merge pull request #1350 from odewdney/Development 
Reduce PROGMEM warnings
 2015-01-13 11:26:50 +01:00
odewdney 9d9c859ac1 First move of SdFat library 2015-01-13 08:04:32 +00:00
Tim Hawkins 5045d17a39 fix avrdude upload in makefile 2015-01-13 13:01:43 +08:00
msutas 3a5a6f42fb Corrected the ABL grid option 
G29 E was not retracting the probe on the last probe point when used with ABL grid. Corrected.
 2015-01-12 11:07:46 +02:00
odewdney cd55a93a13 re-add blank line 2015-01-11 19:22:35 +00:00
odewdney 23bfe30036 moved include themister to temperature.c 2015-01-11 18:18:32 +00:00
odewdney 538859669d Removing compiler warnings for progmem 2015-01-11 18:14:21 +00:00
grob6000 bf2c923db5 Make multiple PID parameters a config option 
* Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID
parameters to be used where this would be preferable (e.g. dual
identical extruders)
* When disabled, will use `float Kp, Ki, Kd, Kc;` as before.
Preprocessor macros used to switch between.
* ultralcd.cpp defines extra menus for extra parameters only where
required
* M301 reports `e:xx` only if independent pid parameters enabled
* EEPROM structure still leaves space for 3 extruders worth, when undef
will save single parameter to all extruder positions, but only read the
first
* Switching off saves approx 330 B with no LCD enabled, 2634B with LCD
(RRD) enabled: this is significant.
* LCD modifications should be tested.
 2015-01-11 13:50:17 +11:00
grob6000 0877aa0fe0 Merge remote-tracking branch 'upstream/Development' into independent_pid 2015-01-11 11:32:58 +11:00
msutas e0beb98fd3 Improvement - G29 Option for Not Retracting Servo 
This change introduces an improvement to G29 command on Marlin.

Auto bed leveling operation's reliability is based on the repeatability of the Z-probe switch and the servo. This change introduces an option to G29 command. When the G29 command is sent with an "e" option, during auto bed levelling the servo is not retracted between probes which decreases the bias on auto bed levelling resulting from servo.

G29 command does the auto bed probing as it is.

G29 E command engages the servo on first probing point, probes all points and retracts the servo after probing the last point.

Please comment your opinions, test on your printer and check the code on a programmer's perspective. (I am not a good programmer.)
 2015-01-10 17:25:39 +02:00
grob6000 7d32c7f36d Multiple PID parameter edit for ultralcd 
* Depending on extruder count, will add menu items for ultralcd to edit
individual PID parameters for each extruder
* Added menu items to each language_xx.h
* Builds OK, but recommend testing with typical LCD
 2015-01-11 01:14:02 +11:00
Steffen Vogel 69dc411ae0 Merge branch 'Development' of github.com:MarlinFirmware/Marlin into LogoLCD 
Conflicts:
	Marlin/dogm_lcd_implementation.h
 2015-01-10 14:57:11 +01:00
grob6000 3e2af67ce3 Fix R-H compatibility 
* R-H reads incorrect M301 line from EEPROM output if more than one is
present. Reverted to original output format, using only E0 value.
 2015-01-10 16:44:28 +11:00
grob6000 37c7e8300f Independent PID parameters for each extruder 
* Variables Kp, Ki, Kd, Kc now arrays of size EXTRUDERS
* M301 gains (optional, default=0) E parameter to define which
extruder's settings to modify. Tested, works with Repetier Host's EEPROM
config window, albeit only reads/updates settings for E0.
* All Kp, Ki, Kd, Kc parameters saved in EEPROM (version now v14), up to
3 extruders supported (same as Marlin in general)
 2015-01-10 16:35:12 +11:00
Scott Lahteine 326b925557 DOGLCD and LCD_PROGRESS_BAR to coexist 
Small changes (and formatting to confuse the diff’er) which first
allows DOGLCD and LCD_PROGRESS_BAR to be enabled in tandem, then a
#warning (rather than error) that the extra progress bar / message
options don’t apply to graphical displays at this time. This leaves
open perhaps combining the progress bar and message area in some future
(or forked custom) graphical LCD display arrangement (at which time the
relevant variables may be moved into ultralcd.cpp with externs in
ultralcd.h). I also added a conditional error that the progress bar and
the filament display may not work well together.
 2015-01-09 18:16:56 -08:00
Erik van der Zalm 1aade4a8e2 Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Development 2015-01-09 21:33:29 +01:00
Erik van der Zalm 8a2e84e3f1 Possible fix for FWRETRACT with 0 zlift. 2015-01-09 21:33:02 +01:00
Steffen Vogel 905aab3b85 added missing #endif 2015-01-09 20:23:38 +01:00
Steffen Vogel b9cf1465a7 updated LCD bouts with new strings and bitmaps 
new version is pretty generic and should work in most scenarios
 2015-01-09 18:49:59 +01:00
Steffen Vogel c7632be5cc added high and low resolutions version of splash screen logo (saving code size) 2015-01-09 18:49:24 +01:00
Steffen Vogel 8f0dba7cbf adding string for bouts splash string to config 2015-01-09 18:48:30 +01:00
Bo Herrmannsen d94109e886 updated logo post and ver info 2015-01-09 15:51:15 +01:00
Bo Herrmannsen cd33b5b062 changed logo and ver info 
logo is now 110 pixels wide and starts 9 pixels in from top left corner and also 9 pixels down from same corner... this will give a 9 pixel border all way round

ver info is placed centered and there is a 9 pixel from bottom of display to ver info
 2015-01-09 15:44:47 +01:00
Bo Herrmannsen 9b6c1cfda6 removed unneeded lines in welcome msg 2015-01-09 15:20:41 +01:00
Bo Herrmannsen ffa09f86f4 moved ver info 5 spaces to the right 2015-01-09 13:31:23 +01:00
Alex Borro 2bbb68be8a Fix calculation of BAL grid fitting into the bed 
The previous calc was wrong. Between N points there are only N-1 gaps,
not N.

So changing AUTO_BED_LEVELING_GRID_POINTS to
(AUTO_BED_LEVELING_GRID_POINTS-1)
 2015-01-09 10:17:33 -02:00
Bo Herrmannsen 590caafa2d changed ver info 2015-01-09 13:17:08 +01:00
Bo Herrmannsen 3bb9b31515 changed boot logo a bit to test if fat wall goes away 2015-01-09 12:51:21 +01:00
Steffen Vogel da192c521f Merge pull request #1333 from andrewsil1/development 
Fix grammar/typos in new Configuration.h option
 2015-01-08 00:34:01 +01:00
Erik van der Zalm 3a30d45c2e Revert "issue 968 for dev branch" 2015-01-07 23:40:17 +01:00
andrewsil1 269ec9f87f Fix grammar/typos in new Configuration.h option 
(For the SLOW_PWM_HEATERS option)
 2015-01-07 12:41:09 -08:00
Todd Swindoll 506353892e Rambo Pin documentation and servo support 
Updated pins reference and servo support.

cross referenced between Rambo 1.1, 1.2, and 1.3
 2015-01-07 11:02:05 -06:00
Steffen Vogel 8d7bfd03d8 moved/renamed documentation stuff to top-level directory 2015-01-07 15:33:50 +01:00
Bo Herrmannsen 3c9e6b7b62 added link for pic to hex converter 2015-01-07 14:28:51 +01:00
Bo Herrmannsen 0e760274bd changed reprap logo to marlin logo 2015-01-07 14:27:51 +01:00
Bo Herrmannsen b291a422e9 added square png version of logo 
406*406 pixels
 2015-01-07 13:00:37 +01:00
Luis E Alvarado 7ae548cf34 Update Marlin Firmware URL 2015-01-07 05:26:47 -06:00
Erik van der Zalm 8f9067faa6 Added marlin logos. (Designed by Ahmet Cem TURAN) 2015-01-07 12:21:16 +01:00
Bo Herrmannsen addf52fd4a Merge pull request #1328 from DinoMesina/development 
Some corrections and new features
 2015-01-06 23:52:32 +01:00
Dino Del Favero 5cfe13f240 Correct some mistakes 2015-01-06 21:55:08 +01:00
Dino Del Favero c7e2d73039 Merge branch 'development' 
ok
 2015-01-06 20:18:03 +01:00
Alex Borro 422a958a34 Fix CoreXY speed calculation 
For cartesian bots, the X_AXIS is the real X movement and same for
Y_AXIS.
But for corexy bots, that is not true. The "X_AXIS" and "Y_AXIS" motors
(that should be named to A_AXIS
and B_AXIS) cannot be used for X and Y length, because A=X+Y and B=X-Y.
So we need to create other 2 "AXIS", named X_HEAD and Y_HEAD, meaning
the real displacement of the Head.
Having the real displacement of the head, we can calculate the total
movement length and apply the desired speed.
 2015-01-06 16:39:48 -02:00
Dino Del Favero 038fccd7a1 I have added some code in the "temperature.cpp" for have the possibility of control the time of the states with the heater drived by relays, with this feature now it is possible use PID function in conjunction with relay to control the temperature. I have made some tests and the temperature stay always in the range of +-1°C from the setted temp. 
There is the possibility of turn on this features adding "#define SLOW_PWM_HEATERS" in Configuration.h
 2015-01-06 18:32:17 +01:00
DinoMesina 6730335657 Update Configuration.h 2015-01-06 18:06:02 +01:00
Bo Herrmannsen 4ffecdbf7d Merge pull request #1313 from wgm4321/Development 
Re-enable filament menu with recalc fix when enabling/disabling mm3
 2015-01-06 13:47:49 +01:00
Steffen Vogel 672f764b4d replaced ASCII GPL v3 license by markdown version 
moved new COPYING file to top-level directory to make it more visible and remove clutter from Marlin subduer
 2015-01-06 11:49:05 +01:00
Steffen Vogel f25e793cff rename stepper lookup table scipt to be consistent with termistor lookup table script 2015-01-06 10:30:20 +01:00
Steffen Vogel df17a6a1b4 fix #1305 by proposed workaround (thanks gaby64) 2015-01-06 10:29:26 +01:00
Steffen Vogel f7e65935fb make use of power operator 2015-01-06 10:28:43 +01:00
Steffen Vogel 4e02aff9b5 automatically determine min/max temp for terminator 2015-01-06 10:28:19 +01:00
Steffen Vogel 81363bc441 more cleanups 2015-01-06 10:27:40 +01:00
Steffen Vogel 95f4a55820 refactored termistor table calculation to be in line with wikipedia's article about Steinhart-Hart coefficients 2015-01-06 08:24:59 +01:00
Steffen Vogel 21205cc3d8 more cleanups in the termistorTable generation script 2015-01-06 08:23:51 +01:00
Steffen Vogel fb0996b5db improved output aligment and precision 2015-01-06 08:20:52 +01:00
Steffen Vogel 538231edfd cosmetic whitespace cleanup and comments added/updated 2015-01-06 08:20:20 +01:00
wgm4321 067b509479 Re-enable filament menu with recalc fix when enabling/disabling mm3 2015-01-05 22:29:29 -05:00
wgm4321 a19f2f8ae7 Disable volumetric menu item due to missing recalc of of multipliers when enabled/disabled 2015-01-04 22:15:16 -05:00
wgm4321 f24dda9700 Revert "Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3" 
This reverts commit dd7e4ee97f.
 2015-01-04 22:08:41 -05:00
wgm4321 ec4681ab6b Revert "Add "Detailed Z Probe" menu item with ABL is defined." 
This reverts commit 2b9722f387.
 2015-01-04 21:53:37 -05:00
wgm4321 dd7e4ee97f Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3 2015-01-04 21:44:55 -05:00
wgm4321 2b9722f387 Add "Detailed Z Probe" menu item with ABL is defined. 2015-01-04 21:42:16 -05:00
Dan Royer 9472bbe51d issue 968 for dev branch 
try, try again.

If 'OK' is garbled on sending PC won't receive it.  Both machines will
wait on each other forever.  This resends OK if nothing is heard from PC
for a while to avoid this bad case.
 2015-01-04 12:17:46 -08:00
alexborro d2b6e62996 Merge pull request #1309 from philfifi/fix_temp_runaway 
temp runaway: proper cast to prevent any overflow.
 2015-01-04 12:55:58 -02:00
Philippe L 30248214c7 temp runaway: proper cast to prevent any overflow. 2015-01-04 14:23:31 +01:00
Bo Herrmannsen c5f138ea07 Merge pull request #1291 from alhirzel/Development 
Define analogInputToDigitalPin only if needed
 2015-01-04 12:53:41 +01:00
odewdney 652895d656 try different proproc for CI failure 2015-01-04 11:15:23 +00:00
Bo Herrmannsen 3d9f4ac757 Merge pull request #1303 from wgm4321/Development 
Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ...
 2015-01-04 01:29:26 +01:00
wgm4321 04fb34c7ff Add English defines for filament menu to non-English to prevent compile errors until translated 2015-01-03 17:28:05 -05:00
wgm4321 f8aa5ff771 Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER defined 2015-01-03 17:10:13 -05:00
odewdney 39fae9e3a3 Fix progmem warning 
Borrow code from https://github.com/arduino/Arduino/issues/1793
 2015-01-03 21:30:16 +00:00
Alexander Hirzel f36fd3ddec Merge branch 'Development' of https://github.com/ErikZalm/Marlin into Development 2015-01-02 12:39:39 -05:00
Scott Lahteine b5e50cdd4e Move scripts and documentation to subfolders 2015-01-02 08:53:09 -08:00
Alexander Hirzel eed451e034 rework analogInputToDigitalPin definition 2015-01-02 11:14:20 -05:00
Lane Roberts 1f520a5a8c Due to the fix for #1248, X and Y probe offsets must not be floats. 
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
 2015-01-02 11:12:16 -05:00
wgm4321 b32be2dc64 Fix syntax error caused by previous changes. 2015-01-02 11:12:16 -05:00
wgm4321 edac64e7d2 Add Filament menu and add Filament/Retract settings to config store. 2015-01-02 11:12:15 -05:00
Alexander Hirzel ecda6cdc0a Fix typo, PID_BED_POWER -> MAX_BED_POWER 2015-01-02 11:12:15 -05:00
David Forrest f3e503e725 temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed. 2015-01-02 11:12:15 -05:00
David Forrest 1d5d853c9a temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER. 2015-01-02 11:12:15 -05:00
Bo Herrmannsen 63da6900b0 Merge pull request #1282 from vandarin/Development 
Due to the fix for #1248, X and Y probe offsets must not be floats.
 2015-01-02 15:35:40 +01:00
Bo Herrmannsen a18b625534 Merge pull request #1261 from wgm4321/Development 
Add Filament menu and add Filament/Retract settings to config store.
 2015-01-02 15:35:29 +01:00
Alexander Hirzel ae12ad0d6c Fix typo, PID_BED_POWER -> MAX_BED_POWER 2015-01-02 01:38:03 -05:00
alexborro 80b17ab573 Merge pull request #1285 from drf5n/PID_CI_v2 
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
 2015-01-01 22:56:21 -02:00
David Forrest 625860f086 temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed. 2015-01-01 19:24:42 -05:00
David Forrest 6583bb781d temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER. 2015-01-01 19:11:42 -05:00
Lane Roberts 2701dd8a17 Due to the fix for #1248, X and Y probe offsets must not be floats. 
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
 2014-12-31 12:34:59 -06:00
Grogyan 6b82415c81 Update pins.h 
Somehow the pin definitions for the MAX6675 Slave Select/Chip Select got changed back to the hardware SPI SS/CS.  
Pin 49 cannot be used as that is used by the SD card socket to detect if an SD card is present.
Pin 53 is the Hardware SPI SS, which is dedicated, nicely, to the SD card SS and therefore cannot be used as the MAX6675 SS
Pin 66 is in Aux2 port adjacent to the Hardware SPI interface port on RAMPS 1.4, and is currently not used for anything.
 2014-12-31 13:04:16 +13:00
Bo Herrmannsen 692a01b1c7 Merge pull request #1277 from thinkyhead/fix_regressions 
Fix regressions affecting compilation
 2014-12-30 16:49:08 +01:00
Scott Lahteine 2ec2bf1564 Fix regressions affecting compilation 
This fixes two regressions, caused by #1167 and #1191 .
 2014-12-30 07:36:18 -08:00
Scott Lahteine e7db8ee9e5 ftostr32np > ftostr32sp 
sp=space-padded, similar to: ns=no-sign
 2014-12-30 07:26:25 -08:00
Scott Lahteine 10e1b6ef8b Least stack-usage self-contained ftostr32np() 
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
 2014-12-30 07:26:25 -08:00
Scott Lahteine d1f21d1189 As it should be 2014-12-30 07:26:25 -08:00
Scott Lahteine 449dad71f2 Least stack-usage self-contained ftostr32np() 
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
 2014-12-30 07:26:24 -08:00
Scott Lahteine a2109cb492 Patch to make Z look more like X and Y on UltraLCD 2014-12-30 07:26:24 -08:00
Bernhard Kubicek 3d1da45f3e Update Marlin.h 2014-12-30 08:30:37 +01:00
bkubicek d02daec08f fixed compilation 2014-12-30 08:04:06 +01:00
Caleb Anderson 991a74b75b Move delta calibration menu to sample delta configuration. 
Turn off by default.
 2014-12-29 18:03:56 -07:00
Bo Herrmannsen 67fd8f0727 Merge pull request #1267 from RobotCaleb/LanguageFix 
Language Fix - Using the new language implementation wasn't behaving as expected.
 2014-12-29 19:49:11 +01:00