benlye
24af9e1bf4
Make audible user script feedback optional
...
Add a parameter to enable/disable audible user script feedback
2017-08-04 17:24:10 +01:00
Scott Lahteine
ce65c13a97
Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements
...
Clarify LCD_BED_LEVELING requirements
2017-08-01 17:46:07 -05:00
Scott Lahteine
6ef71c3d5f
Merge pull request #7397 from Kaibob2/patch-4
...
Fix for #7395
2017-08-01 17:40:59 -05:00
Dave Johnson
936dfb965c
Clarify LCD_BED_LEVELING requirements
...
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled. See #7396
2017-08-01 14:13:54 -07:00
Kai
ffe3013bb5
Fix for #7395
...
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
2017-08-01 21:45:41 +02:00
Scott Lahteine
7ef0650504
Merge pull request #7386 from oysteinkrog/fix/DualX
...
Fix DUAL_X_CARRIAGE movement
2017-07-31 20:30:06 -05:00
Øystein Krog
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
...
Axis would only move when homing.
Bug introduced in 91841d75c9
.
Fixes #6956 , fixes #7050 and fixes #7291
2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-30 05:41:12 -05:00
Scott Lahteine
850e404838
Merge pull request #7380 from thinkyhead/bf_touchy_probe_delay
...
Implement probing delay for piezo sensors
2017-07-30 05:39:45 -05:00
teemuatlut
936d00dda8
Implement probing delay for piezo sensors
2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-29 21:15:37 -05:00
Scott Lahteine
ff06e1a030
Merge pull request #7372 from tcm0116/delta_calib_menu
...
Move Delta Calibration menu to the Prepare menu
2017-07-29 21:05:03 -05:00
Thomas Moore
15e009b6ca
Move Delta Calibration menu to the Prepare menu
2017-07-28 08:33:18 -05:00
Scott Lahteine
8b0bd44b1e
Merge pull request #7368 from thinkyhead/bf_fix_warnings
...
Patch to fix some compiler warnings
2017-07-28 02:53:13 -05:00
Scott Lahteine
bfd396c13a
Patch to fix some compiler warnings
2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf
Tweak kill action #ifdef
2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5
Don't reset grid with G29 Q
+ PROBE_MANUALLY
2017-07-27 22:47:43 -05:00
Scott Lahteine
dfe670247d
Merge pull request #7363 from marcio-ao/bugfix-1.1.x
...
Makefile fixes and U8G support.
2017-07-27 21:31:56 -05:00
Marcio Teixeira
af83c512b8
Added support for U8G.
2017-07-27 07:49:25 -06:00
Scott Lahteine
4eff18854b
Rename options with swap_ prefix
2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4
Don't let the flow multiplier affect retract/recover length
2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d
Improve retract() for G10/G11/autoretract
2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
2017-07-27 04:14:29 -05:00
Scott Lahteine
283d15a8d0
Add a Travis CI test for FWRETRACT
2017-07-27 04:14:29 -05:00
Scott Lahteine
e52c1a0882
Merge pull request #7341 from thinkyhead/bf_bed_size
...
Add X_BED_SIZE, Y_BED_SIZE to configurations
2017-07-27 04:05:24 -05:00
Scott Lahteine
5b69d67da9
Merge pull request #7359 from fiveangle/pio_printrboard_revf
...
Add PIO entry for PRINTRBOARD_REVF
2017-07-26 23:09:06 -05:00
Scott Lahteine
51864fd365
Add bed size as a configuration option
2017-07-26 23:04:54 -05:00
Scott Lahteine
dc7c95e07b
Remove @ section fwretract
2017-07-26 22:46:16 -05:00
Scott Lahteine
a972c060d7
Merge pull request #7347 from fiveangle/at90usb_usbcon_unification
...
Remove extraneous USBCON defines for AT90USB boards
2017-07-26 21:44:18 -05:00
Unknown
42aa10d263
Add PIO entry for PRINTRBOARD_REVF
...
fix from PIO corruption
2017-07-25 19:09:08 -07:00
Dave Johnson
4718c09c48
Remove extraneous USBCON defines for AT90USB boards
...
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
2017-07-23 16:41:48 -07:00
Scott Lahteine
21591352d7
Merge pull request #7340 from thinkyhead/bf_neopixel_rgbw
...
Add support for Printrbot Neopixel RGBW strip.
2017-07-22 16:19:12 -05:00
C. Scott Ananian
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-22 16:07:55 -05:00
Scott Lahteine
a059e95463
Bring Infitary i3 config up to date
2017-07-21 20:49:19 -05:00
Scott Lahteine
d6d6043548
Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin
...
MKS 1.3+: Add pin mapping for PS_ON
2017-07-21 20:00:26 -05:00
Scott Lahteine
03989824fa
Merge pull request #7339 from thinkyhead/bf_russian_part_1
...
Update Russian translation - Part 1
2017-07-21 19:57:18 -05:00
Alexey Shvetsov
851f9f5399
Update Russian translation - Part 1
...
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 19:32:37 -05:00
Scott Lahteine
b7a16e4468
Merge pull request #7315 from fixoid/patch-1
...
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
2017-07-21 19:10:54 -05:00
Alexey Shvetsov
f38b8c5bf8
MKS 1.3+: Add pin mapping for PS_ON
...
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 18:50:05 -05:00
Scott Lahteine
60cb2bd4e7
Merge pull request #7332 from thinkyhead/bf_before_fwretract
...
Improve FWRETRACT comments
2017-07-21 00:20:56 -05:00
Scott Lahteine
8a3bc6be4d
Improve FWRETRACT config options and commentary
...
Add more details as requested in #7198
2017-07-20 22:57:50 -05:00
Scott Lahteine
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
Scott Lahteine
7afafb05b8
Split G10/G11 into separate functions
2017-07-20 02:24:13 -05:00
Scott Lahteine
c45798694f
Add some more requirements to the G-code list
2017-07-20 02:24:13 -05:00
Scott Lahteine
72de280c1e
BARICUDA valve pressure consistently uint8_t
2017-07-20 02:21:40 -05:00
Scott Lahteine
4d98e3f0a7
General cleanup
2017-07-20 02:21:40 -05:00
fixoid
e530c67349
Fixing SWITCHING_EXTRUDER feature
2017-07-19 21:15:26 +03:00
Tannoo
2ad3ca5d8a
Bugfix ( #7310 )
2017-07-18 22:55:14 -05:00