Scott Lahteine
336a022529
Support Malyan LCD without SD
2018-05-24 05:01:18 -05:00
Scott Lahteine
f28e366b77
Followup for core endstops
2018-05-24 03:02:57 -05:00
Scott Lahteine
8b44745bc7
Clean up and consolidate SD-related code ( #10831 )
2018-05-24 01:18:56 -05:00
Scott Lahteine
9644d56b42
Patches for core motion tests
2018-05-24 00:49:01 -05:00
Scott Lahteine
5f8591528e
Remove #pragmas that don't help c files
2018-05-23 23:47:16 -05:00
Scott Lahteine
230ae6a143
Default G30 to engage / disengage
2018-05-23 16:57:23 -05:00
Scott Lahteine
3e3789da85
Regression: Endstops Core compatibility ( #10823 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-23 03:45:25 -05:00
Scott Lahteine
c89649b46e
Suppress U8glib build warnings
2018-05-23 02:47:36 -05:00
Axel
bbd09a99f1
32 bit boards classification cleanup ( #10818 )
...
- Ordering and match classification between `boards.h` and `pins.h`
- Check `pins.h` environments
2018-05-22 21:20:24 -05:00
Scott Lahteine
ee333f6be2
Followup to endstops tweaks
2018-05-22 20:41:03 -05:00
Axel
d98bc71af7
Boards classification arrangement ( #10814 )
...
STM32 ARM Cortex-M3 boards were listed as M4
2018-05-22 02:56:51 -05:00
Bob Kuhn
22e0691a70
[2.0.x] Add Sublime support for Auto build, minor Auto-build update ( #10809 )
2018-05-22 02:04:51 -05:00
Scott Lahteine
4b610b333e
Tweak G38 formatting
2018-05-22 01:56:03 -05:00
Scott Lahteine
d2647c1f19
Fix G1 behaviour after tool unpark
...
Fix #10777 for 2.0.x
Co-Authored-By: Ante Vukorepa <o.orcinus@gmail.com>
2018-05-22 00:53:00 -05:00
Scott Lahteine
3bb950c69a
Fix DEBUG_LEVELING_FEATURE for MBL
...
As noted in #10777
2018-05-22 00:49:15 -05:00
Scott Lahteine
1af98519cd
Group and adjust LCD buttons code
2018-05-22 00:37:45 -05:00
Scott Lahteine
0c3773d724
Cleanup in stepper_indirection.h
2018-05-22 00:36:03 -05:00
Scott Lahteine
4118199ddd
Tweaks to core headers
2018-05-21 20:32:18 -05:00
Scott Lahteine
4b2f6e3b2b
[2.0.x] Add endstop noise filter ( #10796 )
2018-05-21 15:51:38 -05:00
Scott Lahteine
65a004564c
Stepper::set_position needed for some applications
2018-05-21 15:21:33 -05:00
Scott Lahteine
435ecb6b67
Followup to stepper/planner refactor
2018-05-20 23:13:38 -05:00
Bob Kuhn
6dfbb39f83
[LPC1768] Add error-handling to upload script, update autobuild.py ( #10802 )
2018-05-20 21:22:04 -05:00
Scott Lahteine
68d7fcec83
Simplify and fix Z fade height edit
...
Fix #10761
2018-05-20 12:29:23 -05:00
Bob Kuhn
d557c84a71
[2.0.x] Error for FAST_PWM_FAN with 32 bit CPU ( #10798 )
2018-05-20 11:37:55 -05:00
Scott Lahteine
16f92dca44
Merge pull request #10688 from ejtagle/bugfix-2.0.x
...
[2.0.x] Refactor, optimization of core planner/stepper/endstops logic
2018-05-20 07:24:39 -05:00
etagle
569df3fc0c
Fix interrupt-based endstop detection
...
- Also implemented real endstop reading on interrupt.
2018-05-20 07:10:24 -05:00
etagle
a4af975873
Fix planner block optimization
...
- Fixed the planner incorrectly avoiding optimization of the block following the active one.
- Added extra conditions to terminate planner early and avoid redundant computations.
2018-05-20 07:10:24 -05:00
etagle
e0ca627033
Planner block HOLD flag
...
Allows the Stepper ISR to wait until a given block is free for use. Allows Planner to plan the first move, which is split into two.
2018-05-20 06:23:58 -05:00
etagle
a11eb50a3e
Refactor and optimize Stepper/Planner
...
Better encapsulation and considerably reduce stepper jitter
2018-05-20 06:23:58 -05:00
etagle
0566badcef
Add memory barrier, optimal interrupt on-off
...
Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/ )
2018-05-20 02:39:34 -05:00
Scott Lahteine
c2fb2f54a1
Use assembly for AVR ISR vectors
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-20 01:58:51 -05:00
Scott Lahteine
206014a957
Fix LPC176x timer functions
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-20 01:58:51 -05:00
Scott Lahteine
59f7861bcb
Move backtrace to the HAL folder ( #10790 )
2018-05-20 01:33:21 -05:00
Scott Lahteine
228139eae6
Tweak some LCD comments
2018-05-19 21:00:08 -05:00
Scott Lahteine
7dc03ce721
Simplified fix for babystep pulse width
...
Alternative to the apparently superfluous double delay
2018-05-19 21:00:08 -05:00
Scott Lahteine
65270d6a96
Fix LIN_ADVANCE + SWITCHING_EXTRUDER
...
Followup to #10656
2018-05-19 18:32:00 -05:00
Bob Kuhn
62e2987488
add AT90USB support & add items to popup menu ( #10779 )
2018-05-19 17:39:26 -05:00
Bob Kuhn
9ad42d6617
add delay between pulse edges ( #10778 )
2018-05-19 17:12:16 -05:00
Scott Lahteine
fe7aea7bf6
Merge pull request #10772 from GMagician/2.0.x-address-#10766
...
[2.0.x] Fix switching extruder
2018-05-19 17:10:56 -05:00
Scott Lahteine
83d42f33e1
Add HAS_HOTEND_OFFSET_Z conditional
2018-05-19 17:05:15 -05:00
GMagician
3c76bda2d8
Fix switching extruder
...
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
2018-05-19 17:05:15 -05:00
Scott Lahteine
8f18854d4d
monitor_baud => monitor_speed
2018-05-19 16:59:23 -05:00
Scott Lahteine
c173a31060
Fix some compile warnings
2018-05-19 16:54:48 -05:00
Giuliano
e1d9046efc
[2.0.x] Temperature reading fix ( #10774 )
2018-05-19 15:39:36 -05:00
Chris Pepper
9b64fdbc3a
[LPC176x] HAL: Add missing program space definition ( #10776 )
2018-05-19 15:37:54 -05:00
Scott Lahteine
50270b53a0
Clear up some more compile warnings
2018-05-17 18:40:49 -05:00
etagle
06fd4d7b28
Improve NOMORE, NOLESS, and LIMIT macros
2018-05-17 18:23:14 -05:00
etagle
40d7e12827
Removing warnings from compilation
2018-05-17 18:04:22 -05:00
Scott Lahteine
b9079aa1b5
Merge pull request #10754 from comps/fan-max-pwm-scaling
...
[2.0.x] Add FAN_MAX_PWM
2018-05-15 22:23:47 -05:00
KangDroid
9a531da861
Support Darwin environment on buildroot/bin ( #10751 )
2018-05-15 22:22:03 -05:00
