Roxy-3D
37550e9d98
Allow 3-digit LCD Display of value
...
The LCD Display shows 3 digits of precision, not 4.
So change the bounding value to something more rational.
2019-10-13 14:34:51 -05:00
Roxy-3D
05eed72b69
Allow LCD Menu to adjust Junction Deviation lower
...
Allow LCD Menu to adjust Junction Deviation lower than .01. Some machines currently have a JUNCTION_DEVIATION_MM value as low as .005 mm. In the case of non-Linear-Advance machines... The upper limit is raised to .5 mm.
Probably more thought needs to be given to the Linear Advance case. It maybe it doesn't need a special case and should just use the same bounds as the non-Linear Advance case.
2019-10-12 17:36:43 -05:00
Gustavo Alvarez
df09532a9c
Reassign FIL_RUNOUT_PIN for ReARM boards ( #15519 )
...
Reassign FIL_RUNOUT_PIN from P1_18 to P1_19
P1_18 is connected to a buffer in order to output 5V making it unsuitable for input.
2019-10-12 21:02:20 +01:00
Haxk20
1df90aaf0e
Followup to num2str update ( #15518 )
2019-10-11 08:45:15 -05:00
Matthew Piercey
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
2019-10-11 00:59:58 -05:00
Robby Candra
e79666a82b
Followup to "Fix G2/G3 rounding" ( #15510 )
2019-10-10 21:16:37 -05:00
LinFor
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
Scott Lahteine
5641adb01b
Clean up stray tabs
2019-10-10 20:16:16 -05:00
Ed Williams
d8aeeb8ff6
Fix G2/G3 rounding error ( #15507 )
2019-10-10 19:50:08 -05:00
Roxy-3D
2cf35267c4
Set Junction Deviation value from Jerk and Default Acceleration ( #15509 )
...
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
Robby Candra
6f60838736
Fix PAUSE_MODE_CHANGE_FILAMENT menu item ( #15501 )
2019-10-10 19:39:32 -05:00
Robby Candra
ac466ecf74
Change Junction Deviation to Classic Jerk ( #15505 )
2019-10-10 19:31:59 -05:00
Scott Lahteine
3664beec29
Don't refresh on status line changes
2019-10-10 19:29:17 -05:00
Scott Lahteine
13cf417a98
[cron] Bump distribution date
2019-10-10 00:00:04 -05:00
ANMay-ru
b119c14017
Clean up LCD print, align ( #15498 )
2019-10-09 20:41:44 -05:00
Jason Smith
46763efb75
Fix tool-change move with hotend offset ( #15491 )
2019-10-09 19:48:00 -05:00
Marcio Teixeira
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
Marcio Teixeira
dc14d4a13c
Improvements and fixes to Lulzbot UI ( #15490 )
2019-10-09 19:44:49 -05:00
Scott Lahteine
e6055dce76
Followup to position refactor
2019-10-08 22:08:05 -05:00
Scott Lahteine
b4d48fdc91
Followup to #15481
2019-10-08 21:38:02 -05:00
Scott Lahteine
af80653f3f
Always report all PIDs in M503
...
Fix #14474
2019-10-08 21:07:19 -05:00
Scott Lahteine
914605c89c
gcc is forgiving of stray ;
2019-10-08 20:36:39 -05:00
Scott Lahteine
89490171ef
Use "concatenatable" language codes
2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
Scott Lahteine
1df6c7a46c
Work around a compiler bug
...
See #15478
2019-10-08 19:27:03 -05:00
Scott Lahteine
5becda25c5
Followup to E renumbering
2019-10-08 17:37:17 -05:00
Scott Lahteine
cb1cb72c76
Fix Move Z menu item
2019-10-08 17:24:40 -05:00
LinFor
58f81f8e7e
Followup to progress override ( #15488 )
2019-10-08 15:24:14 -05:00
Scott Lahteine
d45ab47139
[cron] Bump distribution date
2019-10-08 14:33:57 -05:00
Scott Lahteine
9dcccc11ba
Fix extra condition
2019-10-07 22:36:49 -05:00
Scott Lahteine
cc822c1a05
Use lambdas in menus, where possible ( #15452 )
2019-10-07 19:44:33 -05:00
Scott Lahteine
59508edf64
Suppress data[] array warning
2019-10-07 19:32:23 -05:00
Scott Lahteine
e84389c976
Fix G2/G3 workspace plane parameters ( #15475 )
2019-10-07 17:09:20 -05:00
LinFor
19b7be067c
Allow M73 to override SD position ( #15449 )
2019-10-07 16:38:58 -05:00
chzj333
d04561805b
Support for BTT SKR Mini E3 v1.2 ( #15476 )
2019-10-07 15:45:11 -05:00
InsanityAutomation
71526fa5ce
Fix ExtUI onMeshUpdate event ( #15477 )
2019-10-07 15:39:52 -05:00
Scott Lahteine
56595a4c9c
Improve G2/G3 precision
...
See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253
2019-10-07 00:03:17 -05:00
Scott Lahteine
211ff67440
Patch blocking and manual moves
2019-10-06 23:58:19 -05:00
Tanguy Pruvot
c6ffa7f38d
MKS Robin: SD pins not required (SDIO) ( #15474 )
2019-10-06 23:20:43 -05:00
Scott Lahteine
519cc1bc67
NUM_AXIS is now obsolete
2019-10-06 22:18:16 -05:00
Scott Lahteine
9188ce1a8d
Add JOIN for simple append
2019-10-06 22:01:06 -05:00
Scott Lahteine
51ae13fc8c
Compact MIN/MAXTEMP_ALL
2019-10-06 21:58:58 -05:00
Scott Lahteine
5449088a8e
Fix Japanese language extra define
2019-10-06 21:58:58 -05:00
Me No Dev
fc6a0937b8
Improve Malyan M200 integration ( #15462 )
2019-10-05 22:37:22 -05:00
Giuliano Zaro
a1ad01e4ab
Limit Case Light PWM ( #15459 )
2019-10-05 22:32:50 -05:00
Scott Lahteine
f8498d8a52
GET_TEXTF => GET_TEXT_F
2019-10-05 20:47:28 -05:00
LinFor
e854eb933d
Allow pins overrides for SKR V1.3 ( #15451 )
2019-10-05 20:40:01 -05:00
Jimmy Page
203d260a41
Update Japanese font and translation ( #15470 )
2019-10-05 20:35:20 -05:00
Daniel Andersen
0076e1e792
Fix CR10 Stock Display timing with SKR_PRO V1.1 ( #15446 )
2019-10-05 20:33:46 -05:00
Giuliano Zaro
a3ec573984
Uniform fan speed & case light
2019-10-05 18:34:11 -05:00
