AnHardt
2ddb2a2be9
Add Servo::move() to servo.cpp
...
move(pin, angel) - Sequence of attach(pin), write(angel),
if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches.
As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour,
the usual sequence to handle a servo movement is:
attach(pin)
write(angel)
delay(until the servo finished the move)
detache()
Here a function to handle the complete sequence.
2015-07-15 17:39:43 -05:00
mkile
8a01e5fb7a
Update Russian translation (PR#2443)
...
Slightly updated translation.
2015-07-15 10:35:36 -05:00
Richard Wackerbarth
e83575537a
Compiler defines USBCON for USB devices (PR#2433)
2015-07-15 10:32:11 -05:00
ayberkozgur
7268d46508
Always calculate extruder temperature PID d term (PR#2432)
2015-07-13 13:22:26 -05:00
Scott Lahteine
87a872e103
Use st_get_position_mm where possible (PR#2411)
2015-07-12 22:15:54 -05:00
Scott Lahteine
2e0da8abdc
Allow N to take a negative argument (PR@2402)
2015-07-12 22:14:25 -05:00
Richard Wackerbarth
85b7cca4d0
Merge Stepper reset for RigidBot (PR#2417)
2015-07-11 16:04:56 -05:00
Scott Lahteine
447dbd6fa5
Add STEPPER_RESET_PIN support
2015-07-11 16:04:11 -05:00
Scott Lahteine
a0351bdb73
Remove STEPPER_RESET_FIX option
2015-07-11 16:04:11 -05:00
Scott Lahteine
6b1b8cb2b3
Also nullify spaces before the checksum asterisk (PR#2409)
2015-07-10 09:03:07 -05:00
Richard Wackerbarth
0fd814e4f1
Merge RigidBot (PR#2401)
2015-07-09 11:37:26 -05:00
Scott Lahteine
8e61314323
Use RIGIDBOT_PANEL for consistency with online docs
2015-07-09 11:36:46 -05:00
Scott Lahteine
4b204da3c1
Cleanup of pins_RAMPS_13.h
2015-07-09 11:36:46 -05:00
Scott Lahteine
536f86e896
RigidBot CONTROLLERFAN_PIN in Configuration_adv.h
2015-07-09 11:36:46 -05:00
Scott Lahteine
f068e46661
RigidBoard include for pins.h
2015-07-09 11:36:46 -05:00
Scott Lahteine
9ebcae496d
RIGIDBOARD / RIGIDPANEL
2015-07-09 11:36:46 -05:00
Scott Lahteine
c3c605c658
Move note about LiquidTWI2 to Configuration.h (PR#2406)
2015-07-09 05:33:17 -05:00
Richard Wackerbarth
3b769753eb
Merge M11 fixes (PR#2394)
2015-07-07 07:04:30 -05:00
Scott Lahteine
4e9d658141
Prevent a hanging SERIAL_ECHO_START in M111
2015-07-07 06:59:10 -05:00
Scott Lahteine
bc0fdbe88e
Use SERIAL_EOL in SERIAL_PROTOCOLLN macros
2015-07-07 06:59:10 -05:00
Scott Lahteine
d78ebbc0e9
Remove unused MSG_OK_B and MSG_OK_T
2015-07-07 06:59:10 -05:00
Scott Lahteine
6b494c1535
Use disable_all_heaters in M111
2015-07-07 06:59:10 -05:00
Scott Lahteine
15190d40df
Add extra EOL after M111
2015-07-07 06:59:10 -05:00
AnHardt
0e1cf78f5c
Remove code for testing if probing range is too small (PR#2390)
...
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
2015-07-07 06:58:01 -05:00
AnHardt
d421f5250d
Correct the sign of zprobe_zoffset for G29 (PR#@391)
...
Sign flipped with #2167 .
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
2015-07-07 06:55:33 -05:00
Scott Lahteine
52fcc743ab
Replace "target" with "destination" in M600 (PR#2374)
...
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
2015-07-04 05:55:25 -05:00
Scott Lahteine
a5033c3652
Enable LCD_PIN_RESET if it exists (PR#2375)
2015-07-04 05:53:22 -05:00
AnHardt
23c8c5348f
Z-height fix V2b (PR#2351)
...
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
2015-07-02 20:30:40 -05:00
Todd Swindoll
a111fbbd0a
z-probe offset fix (PR#2361)
...
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
2015-07-02 20:28:07 -05:00
AnHardt
dae4eb36ad
Add MagoKimbra to the list of contributors (PR#2356)
...
in Development
2015-06-30 08:23:38 -05:00
AnHardt
2c1414f81f
Reactivate tests for more extruders in Travis (PR#2348)
...
BOARD_ULTIMAKER was not the default any more
- sed failed to change the board
- RAMPS_EFB has no second extruder
- ...
- Added test for bed
Rebased.
2015-06-29 09:30:33 -05:00
Richard Wackerbarth
316469e76a
Clean up comments and spacing
2015-06-28 08:22:29 -05:00
Scott Lahteine
42465ee444
Cleanup of comments & spacing
2015-06-28 08:20:28 -05:00
Scott Lahteine
9682ed455e
Fix comment on M83, add comment to prepare_move
2015-06-28 08:20:19 -05:00
Richard Wackerbarth
8c760f1c31
Modify Travis build to use IDE 1.6.4
2015-06-27 16:51:42 -05:00
Richard Wackerbarth
cfb416fda9
Merge branch 'PrepareForIDE1.6' (PR#2306)
2015-06-27 15:49:12 -05:00
Richard Wackerbarth
9643e6c744
Make the platform.local a bit more generic
2015-06-27 15:45:25 -05:00
Richard Wackerbarth
4683645036
Vendor (Marlin) files
2015-06-27 15:45:25 -05:00
Richard Wackerbarth
efd5658e32
library - SPI
2015-06-27 15:45:25 -05:00
Richard Wackerbarth
9b13e60e38
core - AT90USB…
2015-06-27 15:45:25 -05:00
Richard Wackerbarth
907032616e
core - arduino
2015-06-27 15:45:25 -05:00
Richard Wackerbarth
e2f2458928
library - Liquid Crystal
2015-06-27 15:45:24 -05:00
Richard Wackerbarth
d8785ffc6f
library - TMC26x Stepper
2015-06-27 15:45:24 -05:00
Richard Wackerbarth
ae9de515b8
library - L6470
2015-06-27 15:45:24 -05:00
Richard Wackerbarth
363d7c505f
library - Wire
2015-06-27 15:45:24 -05:00
Richard Wackerbarth
7592bb1f2f
library - U8glib upgrade to v1.17
2015-06-27 15:45:24 -05:00
Richard Wackerbarth
deea00dde3
library - U8glib
2015-06-27 15:45:23 -05:00
Richard Wackerbarth
1fd335b702
Bootloaders
2015-06-27 15:45:22 -05:00
Richard Wackerbarth
bf629cf7b1
Have Travis Get additional information from the git repository
...
Travis builds from a detached head.
We need to use the current branch so that versioning works properly
2015-06-27 15:45:22 -05:00
Scott Lahteine
bb44fe17cf
Fix typo in buzzer.h endif (PR#2337)
2015-06-27 06:10:19 -05:00
