zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
15861 commits 1 branch 0 tags 156 MiB
Commit graph

1362 commits

Author SHA1 Message Date
Roman Moravčík e110f5abce M73 R : Set Remaining Time (#15549) 2019-11-12 19:36:54 -06:00
danym21 28e1614c2e Add Sensorless Homing current (#15690) 2019-11-10 18:45:06 -06:00
Jason Smith 770adcfa15 Raise Z before homing X/Y on unknown Z (#15859) 2019-11-10 16:21:20 -06:00
ellensp 7b29c60c46 Fix compile with chamber enabled (#15862) 2019-11-10 16:15:08 -06:00
Scott Lahteine 776632c503
Add and apply REPEAT macro (#15829) 2019-11-09 17:59:04 -06:00
Scott Lahteine ca6d00b862 Save some string flash 2019-11-02 00:48:05 -05:00
Scott Lahteine ad28da7eb4 Patch ABL G29 loop 
Followup to e3ddf6e81a
 2019-11-01 15:39:05 -05:00
Scott Lahteine e7d9db284e Followup to M240 patch 2019-10-31 17:27:19 -05:00
Raúl Lázaro Sánchez 7c60853219 Fix blocking delay in Photo G-code M240 (#15728) 2019-10-31 17:14:11 -05:00
Scott Lahteine 4e6e02bc3e Include pause.h for M701-702 2019-10-31 13:18:50 -05:00
Scott Lahteine e3ddf6e81a Fix meshCount signed-ness 2019-10-31 13:18:50 -05:00
Scott Lahteine c80eda073f M119 => report_states 2019-10-30 15:24:10 -05:00
Scott Lahteine 7a342ecb93
Show Total E during print (#15703) 2019-10-27 17:49:27 -05:00
Scott Lahteine ab0fe1a7dd Tweak G29 faux point 2019-10-26 14:41:54 -05:00
Scott Lahteine 732bf89878 Get 'cancelable' for gcode.cpp 2019-10-25 19:38:23 -05:00
Scott Lahteine 014b739bac Fix M486 int parameters 2019-10-25 19:19:33 -05:00
Scott Lahteine 93f0012959
Cancel Objects - As seen at ERRF2019 (#15590) 2019-10-24 15:35:40 -05:00
InsanityAutomation 82fb046013 Allow suicide pin inverting (#15586) 2019-10-24 14:07:28 -05:00
Jacob Jordan 9895e6d766 Only use slow homing speed where applicable (#15640) 2019-10-24 13:14:45 -05:00
Robby Candra cf8541a7a7 Fix G92.9 (thus PLR Z position) (#15625) 2019-10-24 13:05:50 -05:00
Scott Lahteine cd3ec5a77b Add error-check to M422 2019-10-24 12:59:50 -05:00
milkpirate 6bcd4eb12d Fix M420 (UBL) undefined variables (#15621) 2019-10-24 12:07:17 -05:00
Scott Lahteine af214ff121 Fix up PSU_CONTROL checks 2019-10-22 16:16:12 -05:00
Scott Lahteine 160c8be191 Fix BABYSTEP_DISPLAY_TOTAL output 2019-10-21 13:53:19 -05:00
Scott Lahteine 0652f19673 Fix M420 for moved probe methods 2019-10-16 15:56:34 -05:00
Scott Lahteine bb381e22b2 Fix left-shift warning 2019-10-16 15:42:46 -05:00
Bo Herrmannsen 0d7736d663 Enable M191 (#15531) 2019-10-16 15:02:37 -05:00
Jason Smith 832cb7e1ac Z_STEPPER_AUTO_ALIGN — To align with Z stepper points (#15195) 2019-10-16 13:39:58 -05:00
Scott Lahteine b7b303f4bf
Spindle/Laser power in planner blocks (#14437) 2019-10-15 16:10:20 -05:00
Scott Lahteine faacfe13c2 Tweak M105 layout 2019-10-15 13:35:13 -05:00
Antti Andreimann d47f29bd4c Give a dummy response to M105 with zero thermistors (#15568) 2019-10-15 13:30:52 -05:00
Robby Candra e79666a82b Followup to "Fix G2/G3 rounding" (#15510) 2019-10-10 21:16:37 -05:00
LinFor b20d5a7cc6 Estimate Remaining Time (graphical display) (#15497) 2019-10-10 21:03:33 -05:00
Ed Williams d8aeeb8ff6 Fix G2/G3 rounding error (#15507) 2019-10-10 19:50:08 -05:00
Marcio Teixeira 6a865a6146 Multi-language support (#15453) 2019-10-09 19:46:10 -05:00
Scott Lahteine c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
Scott Lahteine e84389c976
Fix G2/G3 workspace plane parameters (#15475) 2019-10-07 17:09:20 -05:00
LinFor 19b7be067c Allow M73 to override SD position (#15449) 2019-10-07 16:38:58 -05:00
Scott Lahteine 56595a4c9c Improve G2/G3 precision 
See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253
 2019-10-07 00:03:17 -05:00
Scott Lahteine 519cc1bc67 NUM_AXIS is now obsolete 2019-10-06 22:18:16 -05:00
Scott Lahteine 0322348924 Handle runout in runout.cpp 2019-10-03 06:27:30 -05:00
Oliver Jean Eifler d52b908627 Fix coordinate size for G26 w/out arcs (#15443) 2019-10-01 20:02:27 -05:00
InsanityAutomation 438835f6a5 Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929) 2019-10-01 19:59:48 -05:00
Scott Lahteine e3fd0519b3 Reduce need for UNUSED 2019-09-30 22:56:22 -05:00
Scott Lahteine 139b7196a0
Watchdog cleanup (#15283) 2019-09-29 17:57:29 -05:00
Scott Lahteine f307ff68f7 Multiply by float, not double 2019-09-29 17:25:27 -05:00
Alex Somesan 10bbed7f69 Fix comma/semicolon typo (#15420) 2019-09-29 16:50:53 -05:00
Scott Lahteine 50e4545255
Add custom types for position (#15204) 2019-09-29 04:25:39 -05:00
Scott Lahteine 7c5e6900e1 Tweak comment 2019-09-28 22:08:02 -05:00
InsanityAutomation 0ca6abce72 Add reporting to M290 (#15376) 2019-09-28 16:58:48 -05:00
InsanityAutomation a6b0223eea Revive and improve DELTA probe bounds, LRFB options (#15372) 2019-09-28 01:19:11 -05:00
InsanityAutomation 5221e2d991 Restore Host Prompt Info (#15387) 2019-09-27 17:06:26 -05:00
Scott Lahteine d683f98019 Return buffer in duration.toString 2019-09-27 04:45:01 -05:00
Marcio Teixeira a18d16fb8b Do not implicitly concatenate localized strings (#15383) 2019-09-27 04:38:43 -05:00
Scott Lahteine 665e45e0ba Reduce string storage, use masking 'seen' 2019-09-26 04:30:55 -05:00
Scott Lahteine 455dabb183
Add a feedRate_t data type (#15349) 2019-09-26 01:28:09 -05:00
Scott Lahteine b2e1f77f58 Fix extraneous "Home XYZ First" message 2019-09-25 21:57:20 -05:00
Scott Lahteine 25c4c2f24e Fix bool in M851 2019-09-25 08:39:11 -05:00
Scott Lahteine da1bda493e Apply Marlin conventions to M851 2019-09-25 03:57:16 -05:00
InsanityAutomation e9cf46a9a5 M851 XY 3 point followup (incomplete) (#15361) 2019-09-25 02:43:41 -05:00
Robby Candra 9c288a682d Followup to probe_at_point change (#15342) 2019-09-25 02:29:10 -05:00
Scott Lahteine 5288c399ce Patch probe offset name, defines 2019-09-24 23:39:23 -05:00
Scott Lahteine 4e8d9fe59b zprobe_offset => probe_offset 2019-09-24 23:36:09 -05:00
InsanityAutomation df1e51258a Add M851 X Y probe offsets (#15202) 2019-09-24 21:29:21 -05:00
Scott Lahteine 5e13fe989f Rename some feedrate-oriented functions 2019-09-23 22:36:41 -05:00
Scott Lahteine 13d725d24d Tweak debug messages 2019-09-20 23:35:22 -05:00
Scott Lahteine 1a1375964f Drop unused G26 function 2019-09-18 04:07:14 -05:00
Scott Lahteine b71a755a30 Add float suffix in G33 2019-09-17 23:30:27 -05:00
Scott Lahteine c353eaa146
Misc changes from struct refactor (#15289) 2019-09-17 18:16:28 -05:00
Bas Stottelaar 847e4ced11 Fix M43 without watchdog (#15280) 2019-09-16 16:09:43 -05:00
Scott Lahteine d5f5203880 Use "mount" as card verb 2019-09-15 03:12:44 -05:00
Scott Lahteine 465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor (#15256) 2019-09-14 03:05:10 -05:00
Scott Lahteine f9992c5f33 Implausible 2019-09-11 02:52:14 -05:00
Scott Lahteine 6091e6300a
Fix G90, G91, M82, M83 rel/abs modes (#15218) 2019-09-11 01:29:33 -05:00
Scott Lahteine c590e8ac05
Improve Power-loss Recovery (#15135) 2019-09-10 18:52:41 -05:00
Scott Lahteine 75927e17dd
Filament Width Sensor singleton (#15191) 2019-09-10 18:48:58 -05:00
Scott Lahteine 584c86bed1
More "zero extruders" changes (#15213) 2019-09-10 02:20:49 -05:00
Scott Lahteine 841c8ce0d9
Remove PROMPT_INFO / PROMPT_GCODE_INFO (#15210) 2019-09-09 15:43:06 -05:00
InsanityAutomation 0693767efa ExtUI Pause/Stop on all Pause/Stop (#15188) 2019-09-08 01:47:07 -05:00
Lucio Tarantino 8ac52aedff M118 multiserial support (#15176) 2019-09-08 00:57:59 -05:00
Jamie dbee0e9c54 Analog joystick jogging control (#14648) 2019-09-08 00:55:34 -05:00
Ludy 068c303742 More translatable LCD strings (#15190) 2019-09-08 00:15:25 -05:00
Scott Lahteine 7496e1cd67 whitespace 2019-09-04 21:55:41 -05:00
Jamie 293b890940 Apply soft limits to G2/G3 final target (#15156) 2019-09-04 13:02:30 -05:00
Giuliano Zaro 9958f5e322 Home on G34 if steppers slept (#15127) 2019-09-02 02:44:48 -05:00
Scott Lahteine a2e412c0ce Rename command buffer var 2019-09-01 20:43:31 -05:00
Scott Lahteine 586b334c2a
Split up stepper indirection (#15111) 2019-08-31 19:44:45 -05:00
Luu Lac 081e4506ca Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS (#15069) 2019-08-28 04:20:28 -05:00
InsanityAutomation b7796bcce6 Disable steppers on M112 (#15065) 
And change verbiage to not refer to "Emergency Stop."
 2019-08-28 00:51:01 -05:00
InsanityAutomation f218405c36 Fix ExtUI invalid speed, timer (#15031) 2019-08-25 04:46:02 -05:00
Scott Lahteine dd6efe96e7 Restore documented M503 behavior 2019-08-22 18:58:11 -05:00
InsanityAutomation af5a7a2925 Add missing ExtUI user confirmation (#14992) 2019-08-18 21:03:26 -05:00
Marcio Teixeira 274934ad81 Add LULZBOT_TOUCH_UI (#14967) 2019-08-16 18:34:13 -05:00
Marcio Teixeira 179d6c4ed1 Add STARTUP_SCRIPT option. M17 parity with M18. (#14953) 2019-08-14 21:05:15 -05:00
Joseph Bozarth 0fbb26c28f M16 - Expected Printer Check (#14924) 2019-08-13 23:38:45 -05:00
Scott Lahteine c8e30b6639
Fix code attempting to sprintf %f (#14869) 
Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.
 2019-08-08 01:51:37 -05:00
Chris Pepper f499cecf0d Marlin Binary Protocol Mark II (#14817) 2019-08-05 20:41:53 -05:00
Acenotass 4af9908764 Update M48 command in the status line (#14816) 2019-08-05 20:01:40 -05:00
teemuatlut d4974ea719 TMC SPI Endstops and Improved Sensorless Homing (#14044) 2019-08-04 22:22:58 -05:00
InsanityAutomation f59a7e8b07 Print/display ABL current probe point (#14788) 2019-08-01 20:11:26 -05:00
InsanityAutomation 6f8b8c394d Homing backoff per-axis / delta Z (#14789) 2019-07-31 20:50:23 -05:00
Scott Lahteine c2b319360d Remove extra pragmas 2019-07-30 20:19:47 -05:00
Acenotass 659d06d9b9 M48 menu item, result to status (#14772) 2019-07-30 02:31:14 -05:00
rafaljot e44fccf3d2 Add support for M575 (#14757) 2019-07-30 02:30:00 -05:00
Scott Lahteine eae543adf3 Apply HAS_SPI_LCD as needed 2019-07-29 18:55:05 -05:00
Giuliano Zaro 290466578f Adafruit Grand Central M4 (#14749) 2019-07-28 14:48:29 -05:00
Scott Lahteine 17abb94532 Whitespace patch 2019-07-28 01:29:23 -05:00
Ludy 97e9c95f47 Fix & clean up ExtUI (#14748) 2019-07-27 22:44:05 -05:00
Scott Lahteine a3dc1e461b Update M7219 comment, tweak parameter code 2019-07-24 21:09:51 -05:00
Scott Lahteine 1088846cae Cosmetic updates from 14044 2019-07-24 01:52:36 -05:00
InsanityAutomation dc6fa04f68 Fix single nozzle temp change, do slower extra prime (#14696) 2019-07-21 19:33:37 -05:00
Tim Moore e5aa453293 Add support for 2 Neopixel strips (#14667) 2019-07-20 23:14:09 -05:00
Jason Smith f2c5740d06 Add 'E' argument to G34 to allow stowing between probes (#14533) 
- Use the return value from probe_pt during `G34`
  Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument.
- Add '`E`' argument to `G34` command allowing stowing between each probe.
 2019-07-17 04:23:19 -05:00
InsanityAutomation b8cc61262f Finish G12, update Nozzle::clean (#14642) 2019-07-17 04:23:19 -05:00
Marcio Teixeira 27c487bab7 Print progress enhancements (#14647) 2019-07-17 03:14:44 -05:00
Scott Lahteine eaf1c0954e Update some precompiler tests 2019-07-14 13:09:16 -05:00
InsanityAutomation ce02c6cee2 Variable tool change purge (#14618) 2019-07-14 11:40:58 -05:00
Marcio Teixeira cbe4bf2ba8 Fix process_injected_command undefined behavior (#14602) 2019-07-14 10:12:48 -05:00
InsanityAutomation d2f20803ba Allow nozzle clean with limited Axis (#14619) 2019-07-14 06:58:53 -05:00
Robby Candra e96468566d Fix Z_PROBE_END_SCRIPT in ABL (#14621) 2019-07-14 04:28:38 -05:00
scotthsl 19b24a349c Fix M412 without HOST_ACTION_COMMANDS (#14591) 2019-07-12 04:23:33 -05:00
Scott Lahteine ed0e6afacb Apply LIMIT macro 2019-07-10 03:35:39 -05:00
Bob Kuhn dc02d0720d Pins Debugging for STM32 — NEEDS TESTING (#14309) 2019-07-05 22:08:06 -05:00
Scott Lahteine fe02241044 NONE on combined options 2019-07-05 18:20:24 -05:00
Scott Lahteine 750a16ad38 Fix MIN/MAX function collision with macros 2019-07-05 18:14:02 -05:00
Scott Lahteine b6546ea33a Add include guards to some headers 2019-07-05 04:02:08 -05:00
Tim Moore eb6dec03bd Simplify power supply naming logic (#14488) 
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
 2019-07-05 01:58:34 -05:00
Scott Lahteine 720bc7c00b
Named indices for Temperature class (#14479) 2019-07-02 08:39:55 -05:00
GMagician 82ecaa767e Remove unused code in M100 
queue.buffer is in bss area, start_free_memory starts from heap then above of bss
 2019-07-01 20:38:49 -05:00
Scott Lahteine d16954dc88
Make KEEPALIVE_STATE a scoped auto-restore (#14446) 2019-06-29 22:49:50 -05:00
Marcio Teixeira e6cf7860e8 Improve ExtUI, fix compiler errors, warnings (#14441) 2019-06-29 00:23:57 -05:00
Darsey Litzenberger 946f6bdeaa Disable leveling during G12 (#14385) 2019-06-28 19:23:42 -05:00
Scott Lahteine 4d5a1984e2 Simplified fan handling code 2019-06-28 18:50:32 -05:00
Scott Lahteine 93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine d7d80418ae
Singleton for cutting tools (#14429) 2019-06-27 23:06:49 -05:00
Tim Moore 81209f5310 'M105 R' to report redundant temp sensor (#14324) 2019-06-27 21:29:52 -05:00
InsanityAutomation ce656e2a26 Update G-code injection, sub-commands (#14418) 2019-06-27 15:07:45 -05:00
Scott Lahteine 2580104c8b Revert recent probe changes 
- Revert "Fix FIX_MOUNTED_PROBE compile error (#14393)"
- Revert "Fix G28 with non-BLTouch probes (#14381)"
- Revert "Fix BLTOUCH deploy/stow in HS mode (#14352)"
- Revert "Apply needed BLTouch patch (#14233)"

Co-Authored-By: AnHardt <github@kitelab.de>
 2019-06-26 05:33:43 -05:00
BigIronGuru 9f136a7c67 Low-priority homing in G34 (#14391) 2019-06-26 03:52:01 -05:00
Scott Lahteine 49627069a5 Shorthand for home-after-deactivate 2019-06-26 03:47:55 -05:00
Marcio Teixeira 8e23e9b16c Fix FIX_MOUNTED_PROBE compile error (#14393) 2019-06-25 04:55:29 -05:00
Scott Lahteine cf762d2c73 Fix enqueueing bug 2019-06-23 23:02:07 -05:00
BigIronGuru 12d21e642f Update G34 for non-BLTouch probes (#14380) 2019-06-23 20:55:43 -05:00
BigIronGuru 5986194c36 Fix G28 with non-BLTouch probes (#14381) 2019-06-23 20:53:05 -05:00
InsanityAutomation aa0383a83b Enhance IDEX toolchange auto-return w/ no park, full control (#14117) 2019-06-23 20:00:48 -05:00
Scott Lahteine 17778d1c2a Fix M916-918 subcommands 2019-06-22 16:18:42 -05:00
Tanguy Pruvot be69ec5b32 Fix PLR/M43 warnings (#14333) 2019-06-22 00:48:47 -05:00
BigIronGuru 9c83135d40 Only home Z at the end of G34 (#14353) 2019-06-22 00:43:33 -05:00
LinFor 0f6f5132c1 Fix variable conflict in ok_to_send (#14351) 2019-06-21 19:04:30 -05:00
InsanityAutomation a9acd2f497 G34 configurable angle limit (#14321) 2019-06-20 21:18:36 -05:00
Scott Lahteine 4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Scott Lahteine 4c872a01f2
G-code queue singleton, front injection (#14236) 2019-06-19 00:00:19 -05:00
InsanityAutomation bf64dd4db6 Improve G34, M422 (Z alignment) (#14142) 2019-06-18 07:02:18 -05:00
Scott Lahteine 3f6424076b Update M524 description 2019-06-18 05:04:55 -05:00
Scott Lahteine cf3631226b Document G-code M290 2019-06-18 04:53:31 -05:00
Scott Lahteine 903863dcb6 Suppress some warnings 2019-06-15 17:47:59 -05:00
mb300sd bf8bfb5c66 Add Coolant Control M7/M8/M9 (#10745) 2019-06-13 18:43:11 -05:00
Scott Lahteine bc2ff9b41f Fix M605 bugs 
Fixes #14191
 2019-06-12 20:01:08 -05:00
Scott Lahteine 04715e04ee Minor M100 cleanup 2019-06-12 06:14:40 -05:00
Scott Lahteine 356410dcfc Move crc16 function to libs 2019-06-12 06:14:39 -05:00
Scott Lahteine 1ef95013f0 Update Marlin.cpp includes, defines 2019-06-11 07:30:51 -05:00
Tanguy Pruvot 8cf5504a34 Redundant but faster recovery.enabled test (#14175) 2019-06-10 23:33:35 -05:00
Scott Lahteine 0ca2073625 ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT 2019-06-10 17:28:35 -05:00
Robby Candra 5ca8d51e12 Ability to insert G-code in front of queue (#14229) 2019-06-08 05:23:53 -05:00
Ludy 8e8e48f900 Fix links in templates, gcode.h (#14160) 2019-05-28 21:39:55 -05:00
Minims 32afe1d102 Fix TOOLCHANGE_ZRAISE warning (#14156) 2019-05-27 19:51:29 -05:00
Scott Lahteine 3c179bbd47 Simpler G28 home axis conditions 2019-05-26 16:26:55 -05:00
Scott Lahteine 352734494b Reduce some M43 strings 2019-05-26 16:21:28 -05:00
Scott Lahteine b14cc0d7c5 Remove extra gcode. prefix 2019-05-26 16:18:45 -05:00
Scott Lahteine c6d39319de Fix some whitespace 2019-05-26 16:18:43 -05:00
InsanityAutomation 212860f090 Always change to Tool 0 on G29 (#14146) 2019-05-26 14:53:21 -05:00
Bryan 0ef5d667b6 Fixed M43 parameter bug (#14099) 2019-05-25 18:23:25 -05:00
teemuatlut 1c86fbc60b TMC updates, capture LCD changes (#14074) 2019-05-25 18:22:12 -05:00
Scott Lahteine fc52c43a26 Some documentation updates 2019-05-24 16:30:44 -05:00
Tanguy Pruvot 24b1818245 Secure STM32F1 servo code and M280 detach (#14085) 2019-05-22 16:57:19 -05:00
Scott Lahteine aeec9ef76b Update backlash code 2019-05-20 21:34:08 -05:00
Tanguy Pruvot 87e7193259 Fix M226 sign warning (for most platforms) (#14049) 2019-05-18 16:15:48 -05:00
FanDjango 85fb33a060 BLTOUCH tweaks, new v3.1 command (#14015) 2019-05-17 19:10:18 -05:00
Scott Lahteine 785c01f2bc Use US spelling of 'behavior' 2019-05-15 01:49:17 -05:00
Sam Lane 7f1e0c5670 Update EXTRA_LINADV_K with Marlin bit macros (#13993) 2019-05-15 01:07:07 -05:00
Robby Candra 7b78a20fb7 Fix: Debug Memory Dump size (#13957) 
* Fix Memory Dump size

* Fix Compile error on Memory Dump
 2019-05-11 11:44:39 -05:00
Giuliano Zaro f22c9a1ae1 Fix G-code parser with MMU2 (#13951) 2019-05-10 19:57:15 -05:00
Bob Kuhn fa3739aa23 M100: LPC1768 and DUE compatibility (#13962) 2019-05-09 21:57:44 -05:00
Scott Lahteine ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
InsanityAutomation 6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
Ludy a504366138 Fix probe fan compiling error (#13930) 2019-05-07 14:14:12 -05:00
Stephan 483822f3aa Fix some THERMAL_PROTECTION_CHAMBER issues (#13678) 2019-05-06 19:55:01 -05:00
doggyfan 23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
Ludy f96eaad1ea Unused variable cleanup (#13917) 2019-05-05 22:01:04 -05:00
Giuliano Zaro e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Marcio Teixeira 15357af67c Backlash cleanup (#13659) 
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
 2019-05-03 23:53:15 -05:00
Robby Candra c369477cb0 Fix bug: diveToFile breaks M23 (#13865) 2019-05-02 15:54:24 -05:00
Thomas Moore ee243e4edf Fix mixing extruder filament change (#13803) 2019-05-01 21:55:58 -05:00
InsanityAutomation 610fb46683 Fix some ExtUI issues (#13799) 2019-04-26 09:32:01 +02:00
Bob-the-Kuhn 73726d56b3 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-25 12:06:01 -05:00
Scott Lahteine 5051909c3c
Update do_select_screen for general use (#13800) 2019-04-24 10:13:44 -05:00
Giuliano Zaro e2dd2268e8 Add a Z raise-between-probes to G34 (#13791) 2019-04-23 13:40:55 -05:00
Scott Lahteine 0c4d3e6622 Improve M906 description 2019-04-22 13:48:02 -05:00
Bob-the-Kuhn 520585c5ed Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-17 15:34:29 -05:00
Scott Lahteine 92ed9a2bb6 Fix is_M29 
Followup for #13013
 2019-04-15 23:47:06 -05:00
Scott Lahteine 9992c424f5 Patch G92.9 flags 
Followup to #13703
 2019-04-15 20:26:40 -05:00
Msq001 455ee23499 Fix, improve Power Loss Recovery (#13703) 
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
 2019-04-15 18:53:39 -05:00
InsanityAutomation aa0f7afbe6 Fix call to uninitialized PWM pin, heater 2 overlap (#13674) 2019-04-15 15:57:34 -05:00
Bob-the-Kuhn 9dd4252b39 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-12 22:07:12 -05:00
Scott Lahteine 7e58d33a2e Update some headers 2019-04-12 13:04:04 -05:00
Jamie 509dc283f2 Restore declarations of G53-G59 (#13654) 2019-04-11 13:51:05 -05:00
InsanityAutomation 4900c28bf6 Fix IDEX tool-change, and more (#13614) 2019-04-09 18:33:40 -05:00
Scott Lahteine 5e38d70697 Fix M217 report label, general cleanup 2019-04-08 18:18:08 -05:00
Scott Lahteine fae2b7edc3 Update MMU2 code style 2019-04-08 18:13:42 -05:00
Scott Lahteine c8a83fb122 SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-08 18:13:41 -05:00
Bob Kuhn 9a56d90150 Fix M43 on LPC176x (#13587) 
The real fix. PR #13568 was wrong.
 2019-04-06 18:06:07 -05:00
Roxy-3D 9cee81d47e Option to show babysteps total since G28 (#13580) 2019-04-06 18:04:34 -05:00
Scott Lahteine cf12fc8366
Expand on serial debugging (#13577) 2019-04-05 20:02:46 -05:00
Marcio Teixeira bf7b28b456 Fix incorrect variable name (#13585) 2019-04-05 19:04:46 -05:00
Scott Lahteine cacec5764a Clean up whitespace 2019-04-04 22:12:02 -05:00
Marcio Teixeira 27a4927ed1 Add option to move away from endstop after homing. (#13557) 
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
 2019-04-04 02:47:19 -05:00
Scott Lahteine af92ee9dd6 No PLR include needed in queue.cpp 2019-04-03 18:26:31 -05:00
Scott Lahteine 2aa35e95af More G26 arc cleanup 
Followup to #13531
 2019-04-03 16:03:21 -05:00
Scott Lahteine a0a5c31c05
Power-Loss initialization fix (#13553) 
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
 2019-04-01 17:52:45 -05:00
InsanityAutomation fbc7b51a24 Use NO_FETCH for Dual X G28 (#13539) 2019-04-01 17:48:21 -05:00
InsanityAutomation 4961d8aa3e Update G28.cpp (#13539) 2019-03-31 19:50:40 -05:00
ManuelMcLure 04086fc455 Minor optimization to ARC_SUPPORT code (#13531) 2019-03-30 22:29:37 -05:00
Robby Candra a3f67acd6d Fix Power Loss Recovery file delete (#13522) 2019-03-30 13:14:58 -05:00
Marcio Teixeira 5679fae11e UltraLCD enhancements (lower fan resolution, backlash menu) (#13519) 2019-03-29 14:07:43 -05:00
Marcio Teixeira c6466c23fe Silence signed/unsigned comparison warning. (#13508) 2019-03-29 13:33:45 -05:00
InsanityAutomation 7240e3a68f Allow G26 with no heated bed (#13511) 2019-03-29 13:32:43 -05:00
Sam Lane e3ab54753b Add extra Linear Advance factors (#13490) 2019-03-26 04:02:27 -05:00
Thomas Moore 263f8edff8 Disable volumetric extrusion during G26 (#13479) 2019-03-25 22:41:52 -05:00
Chris Pepper aacc1148b0 Fix M106 for index > extruders (#13473) 2019-03-24 20:03:53 -05:00
7eggert d96f7d6068 Minimum segments for G2/G3. Better for small arcs. (#13466) 2019-03-24 19:53:47 -05:00
Sam Lane a8fa275dc6 Fix Fan 0 responding to all fan speeds (#13444) 2019-03-23 23:00:31 -05:00
InsanityAutomation 5b2c37d6c1 Followup to BLTouch (#13422) 2019-03-18 16:31:11 -05:00
InsanityAutomation 3fb8489ae3 EXTUI and UBL compilation fixes (#13420) 2019-03-17 07:57:54 -05:00
Scott Lahteine b376c7e374 Group DISABLED items 2019-03-17 07:56:35 -05:00
InsanityAutomation 691e5c3bb8 BLTouch V3.0 support (#13406) 2019-03-17 05:57:25 -05:00
Scott Lahteine 49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
InsanityAutomation 09eb30dc05 IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404) 2019-03-15 22:46:27 -05:00
Scott Lahteine 9a515cbd32
Fix Pause Print message and behavior (#13394) 2019-03-14 02:26:07 -05:00
Scott Lahteine f5bcc00570
Unify debugging output with debug_out.h (#13388) 2019-03-14 02:25:42 -05:00
Andrei Pozolotin cc8a871705 Add capability string CHAMBER_TEMPERATURE (#13391) 
Reference: #13380
 2019-03-13 18:09:22 -05:00
Scott Lahteine 67bee06e43 No patch needed for non-libmaple analogWrite 
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
 2019-03-13 07:21:10 -05:00
Scott Lahteine f89b375fb9
Fixes and improvements for PWM pins (#13383) 2019-03-13 06:51:15 -05:00
Scott Lahteine 87162658c4
Fix and improve software endstops (#13386) 2019-03-13 05:48:36 -05:00
InsanityAutomation c03df89921 ExtUI Mesh Leveling Extensions (#13363) 2019-03-13 00:45:52 -05:00
InsanityAutomation 050eac03af Single X Duplication Extension (#13373) 
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
 2019-03-13 00:42:50 -05:00
Scott Lahteine d63da4592d Tweak to SCARA_move_to_cal 2019-03-12 22:06:50 -05:00
Scott Lahteine d94e077901 Apply HAS_HOTEND_OFFSET where needed 2019-03-11 20:58:27 -05:00
Scott Lahteine e52bcc9408 Limit top bed temp to BED_MAXTEMP - 10 
The chances of a 10° overshoot is pretty minimal.
 2019-03-11 16:32:34 -05:00
Michiel Baird b824a517aa Add G38.4 and G38.5 (#13348) 2019-03-10 17:22:09 -05:00
Tobias Frost 60e82e3929 Send notifications to ExtUI for M0/M1 (#13344) 
- Send notifications to ExtUI for M0/M1

- wait_for_user can be non-volatile (not changed by interrupt)
  C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
 2019-03-09 14:20:37 -06:00
Marcio Teixeira 00fc43144a Follow up fixes to various PRs. (#13334) 
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
  `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)
 2019-03-09 14:20:37 -06:00
InsanityAutomation d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
3dlabsio 645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311) 2019-03-05 06:46:19 -06:00
Scott Lahteine 2e5a3b01fd Save Power Loss Recovery only on move commands 2019-03-05 02:43:29 -06:00
Scott Lahteine 2212da453a
Distinguish between analog/digital auto fans (#13298) 2019-03-05 00:41:31 -06:00
Chris Pepper 2513f6b550
Fix multiport G28 with Binary Transfer (#13308) 2019-03-04 16:44:54 +00:00
Scott Lahteine 35ae5daf2d Split up sdcard G-codes 2019-03-03 01:52:15 -06:00
Scott Lahteine 3f36a38512 Clean up some pre-serial-redirect includes 2019-03-03 01:52:15 -06:00
Scott Lahteine edc4e037c4 Add a note to G10 2019-03-02 17:19:36 -06:00
Chris Pepper b0553d2d97 Add M997 support and simple implementation for LPC176x (#13281) 2019-03-01 20:11:50 -06:00
Scott Lahteine 2f1e1dcb42 Gradual step towards EXTRUDERS 0 support 2019-03-01 01:51:24 -06:00
Scott Lahteine 99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
Chris Pepper 7de6476b3d
Fix binary protocol error 2019-02-28 02:31:42 +00:00
Scott Lahteine 2c10222e87 card.transfer_port => transfer_port_index 2019-02-27 20:14:17 -06:00
Chris Pepper 4ab433d391 Fix binary protocol with one serial port (#13270) 
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
 2019-02-27 19:57:48 -06:00
Bob Kuhn ddbe4cfa20 Printrboard G2 support (#13116) 2019-02-26 21:03:13 -06:00
Scott Lahteine 5d28575d4d Clean up some motion code 2019-02-25 16:01:42 -06:00
Scott Lahteine 808b076000 Update some ABL/UBL conditionals 2019-02-25 16:01:42 -06:00
Scott Lahteine 64253e1a58 Followup to serial reform 
Reference #13250
 2019-02-25 00:20:36 -06:00
Minims 92a4984066 Fix G34 probe position (#13251) 2019-02-24 13:57:30 -06:00
Scott Lahteine e15354e387
Simplify serial port redirect (#13234) 2019-02-23 22:53:01 -06:00
Bruce j Beare 562f2321d2 Fix a G34 bug, allow negative Z corrections (#13240) 2019-02-23 02:41:52 -06:00
Marcio Teixeira 109e67169c Define G21 as NOOP w/o INCH_MODE_SUPPORT (#13229) 
Ticket #13228

If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.
 2019-02-22 15:35:32 -06:00
Scott Lahteine 80359c9937 Add more parameters to M240 
Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>
 2019-02-20 14:51:36 -06:00
Scott Lahteine 89bbc30a09 Fix init of power supply pin 
Fix #13184
 2019-02-20 05:29:05 -06:00
LinFor ba39186364 TMC_DEBUG optimization and improvements (#13135) 2019-02-20 02:22:42 -06:00
Scott Lahteine 3a1b6fe8c1 Coding standards 2019-02-19 14:58:39 -06:00
InsanityAutomation 19af90face Fix a host action compile error (#13208) 2019-02-19 14:47:31 -06:00
Scott Lahteine e00aad84af Add M240 parameters D I J R S 2019-02-14 20:00:40 -06:00
Marcio Teixeira 31c240a8db Enhancements to G425 (#13159) 
- Turn off bed leveling prior to calibrating.
    - This prevents lateral probes from having a Z component that
      triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
    - Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
    - Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
    - Not necessary to disable global endstops
 2019-02-14 16:45:31 -06:00
Scott Lahteine ab2816c870 Patch for M240 2019-02-14 15:13:57 -06:00
Scott Lahteine d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 2019-02-14 15:09:35 -06:00
Scott Lahteine be9a409980 Fix M125 XY parameters, export get_homing_bump_feedrate 2019-02-14 05:25:46 -06:00
Scott Lahteine ce40c2e87c Use do_blocking_move_to(ref, fr) 2019-02-14 02:22:08 -06:00
Scott Lahteine 7cf9b93f26 Add HAS_FILAMENT_SENSOR ahead of 12962 2019-02-12 20:13:20 -06:00
revilor e56c13670d Service interval watchdog (#13105) 2019-02-12 15:58:56 -06:00
InsanityAutomation 7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine 0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine 894f5c24a8 Fix trailing whitespace 2019-02-12 14:25:57 -06:00
Roman Moravčík bace52afd7 Fixed compilation with MMU2_MENUS disabled (#13140) 2019-02-12 12:55:49 -06:00
Scott Lahteine 9737608f0a Enable gradient when alias is cleared 2019-02-10 06:39:12 -06:00
Scott Lahteine 6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
AnHardt 0e37fe8776 Apply minimum C in M303 (#13113) 
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
 2019-02-10 03:54:45 -06:00
Scott Lahteine f269766408 Put the MMU2 menu with the others 2019-02-06 17:38:46 -06:00
Marcio Teixeira e1604198ff G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050) 2019-02-06 17:20:17 -06:00
Mark Zachmann 19cf72e057 Support individual solenoid disable with M381 (#13008) 2019-02-06 06:34:53 -06:00
teemuatlut d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Rolf Werum 524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 2019-02-06 06:30:53 -06:00
Scott Lahteine 1bd9a63049 Add HAS_EXTRA_ENDSTOPS macro 2019-02-06 05:10:05 -06:00
Scott Lahteine 1497fb388a
M29 match logic was reversed (#13013) 
* M29 logic was reversed 

If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"

* Update queue.cpp

* Update queue.cpp
 2019-02-04 07:23:42 -06:00
Scott Lahteine b5fd2fb58b Allow M29 to be processed late 2019-02-04 07:23:02 -06:00
Scott Lahteine c03bac9ad4
Update queue.cpp 2019-02-04 07:17:40 -06:00
Scott Lahteine a49f0205ea
Update queue.cpp 2019-02-04 07:11:08 -06:00
jeffstaley 2f176d6fb8 Flush RX buffer on G-code line errors to prevent hang (#13018) 2019-02-04 06:03:49 -06:00
Scott Lahteine 4200bd2fc1
Report on M92 with no arguments (#12833) 2019-02-04 05:24:15 -06:00
Scott Lahteine 433518de74 Prevent M420 error from disconnecting OctoPrint 
Just echo the error instead of labeling it `Error:`.
 2019-02-04 01:54:43 -06:00
Scott Lahteine 4fa1c52688 Tweak serial output code 2019-02-03 01:09:14 -06:00
Scott Lahteine a5e3384691 Pre-apply cosmetic changes to mixing 2019-02-03 01:09:14 -06:00
mattfredwill c3cb449990 TMC2130 dual-stepper Sensorless Homing (#13061) 2019-02-01 18:09:01 -06:00
revilor 6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
InsanityAutomation a1d03fe7ba Fix single nozzle fan (#13038) 2019-01-30 20:54:04 -06:00
Scott Lahteine 97da6c1da5 Use MIN/MAX for min/max 2019-01-28 20:36:13 -06:00
Giuliano Zaro a79d80c78e Minor cleanup of pause code (#13030) 2019-01-27 23:10:25 -06:00
InsanityAutomation 48a3502656 Remote streamer improvements (#12982) 2019-01-27 22:43:13 -06:00
jeffstaley 3f91233f6d
M29 logic was reversed 
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
 2019-01-25 07:36:52 -08:00
jeffstaley 0e0cc13650 Fix M29 for Pronterface SD card upload (#13010) 2019-01-24 21:10:59 -06:00
Scott Lahteine 8f9b246d0e Tweak some formatting, replace tabs 2019-01-24 13:18:56 -06:00
Bob Kuhn 2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
Scott Lahteine 6453b82a5e Clean up trailing whitespace 2019-01-23 15:57:01 -06:00
InsanityAutomation a1cf49935d Add laser control menu (#12883) 2019-01-20 23:41:47 -06:00
InsanityAutomation 75f2665f2e LCD SD Card items near top when not using wheel (#12926) 2019-01-20 23:24:53 -06:00
Scott Lahteine 0495fcd475 Minor spacing fix 2019-01-20 00:10:50 -06:00
Ludy acf266fe78 Fix a compile warning, etc. (#12955) 2019-01-19 18:47:29 -06:00
Scott Lahteine ce563d7c2e Various general cleanups 
Mostly from the L6470-oriented PR
 2019-01-19 16:56:12 -06:00
teemuatlut e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
Marcio Teixeira f11c6d5d02 Fix M107 when dual-nozzles share fan (#12819) (#12909) 2019-01-15 18:45:18 -06:00
InsanityAutomation 59b18aaeef Allow resume from pause with parking enabled (#12893) 
Currently, Pause of an SD-Memory card print does not work.    This has been verified to resolve the issue by multiple people.   

I understand more work needs to be done to resolve some of the concerns...
 2019-01-15 07:58:54 -07:00
Giuliano Zaro 85f149befe Save some progmem (#12913) 2019-01-14 20:56:30 -06:00
teemuatlut 1a79878dff Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN 2019-01-12 18:07:28 -06:00
Scott Lahteine 7cfce20cd3 Update comments on M125 2019-01-12 17:52:44 -06:00
InsanityAutomation ed3ab5e212 Fix M24 not starting new job (#12887) 2019-01-12 15:30:44 -06:00
InsanityAutomation 082f6a27de ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) 2019-01-12 00:41:48 -06:00
InsanityAutomation a403d9a50c Improve menu pause / resume (#12876) 2019-01-11 20:42:11 -06:00
Scott Lahteine fb8111553e getStatus => report_status 2019-01-11 19:51:00 -06:00
Giuliano Zaro 709a6356f7 Remove obsolete test conditions (#12829) 2019-01-05 14:02:45 -06:00
Luu Lac bcf347403b Fix M106 extruder & fan count (#12820) 2019-01-05 14:01:35 -06:00
Marcio Teixeira 81e753064a Fix ExtUI compile warnings and error (#12799) 2019-01-03 08:36:43 -06:00
Ludy 14a7faf087 Fix compile warning comparison uint and int (#12788) 2019-01-01 18:20:12 -06:00
Marcio Teixeira 60cb36bef3 Misc. improvements (#12747) 
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
 2019-01-01 15:17:48 -06:00
InsanityAutomation 4f2473053c Fix M106 with SINGLENOZZLE 2018-12-31 20:10:18 -06:00
Ludy 814d93c7cf Fix G33 sprintf output warning (#12738) 2018-12-27 18:05:42 -06:00
InsanityAutomation 530ef5846f Make nomove=false for toolchange on filament swap (#12739) 2018-12-27 11:38:35 -06:00
Luc Van Daele c6e09c2689 [2.0.x] G33 clean up (#12648) 
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
 2018-12-18 12:43:38 -06:00
Marcio Teixeira 902d5b0f8b Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628) 2018-12-12 17:21:37 -06:00
teemuatlut 55144284c2 TMC connection test, spreadCycle parameters, improved debugging (#12616) 2018-12-09 20:54:48 -06:00
MasterPIC 3bb8b3529a Center ABL grid on bed with H parameter. (#12610) 2018-12-09 11:24:48 -06:00
Marcio Teixeira b22716e938 M425 Backlash Correction (#11061) 2018-12-08 14:36:46 -06:00
Scott Lahteine b7e38ea249 Signal an invalid mesh for M420 enable / load 2018-12-07 16:14:11 -06:00
teemuatlut 50b2fbd031 Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582) 2018-12-07 15:34:21 -06:00
Scott Lahteine 261c6f4b96 Fix pause/resume SD print 
Followup to #12551, addressing #12566
 2018-11-30 19:23:08 -06:00
Scott Lahteine aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559) 2018-11-30 12:31:42 -06:00
Scott Lahteine c986239837
A single SERIAL_ECHO macro type (#12557) 2018-11-29 16:58:58 -06:00
Scott Lahteine 03ef2d6c82
Fix "paused" message and M125 called by M25 (#12551) 2018-11-28 19:28:31 -06:00
Scott Lahteine 5b24ce9024 Hide M217 compile warning 2018-11-26 16:52:16 -06:00
Scott Lahteine 1fcc13b011 Allow Serial Overrun Protection to be disabled 2018-11-23 21:07:38 -06:00
Scott Lahteine d29cb09b3e Fix a minor compile warning 2018-11-22 05:35:38 -06:00
Scott Lahteine 817a37169a Apply/unapply const here and there 2018-11-20 06:44:21 -06:00
Scott Lahteine a4c15dc54f
Modify MBL to use IJ instead of XY (#12478) 2018-11-19 09:08:15 -06:00
kAdonis 4ae9a06c60 Update M303.cpp (#12471) 2018-11-18 18:04:51 -06:00
Marcio Teixeira c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 2018-11-17 22:21:44 -06:00
Giuliano Zaro 43ecdb606f Fix a compile warning (#12452) 2018-11-17 07:08:25 -06:00
Ludy 56a94c2a26 Use 'target_extruder' in M104 as with M109 (#12448) 2018-11-17 06:55:25 -06:00
Scott Lahteine 66580f32c2
Make CardReader class static (#12451) 
* Make CardReader a static class
* Make CardReader flags into bitfields
 2018-11-16 22:39:16 -06:00
Scott Lahteine d97e31db4c
Optimize Power-Loss Recovery (#12440) 2018-11-16 20:47:07 -06:00
Scott Lahteine 0e610815e4 No need for Cap:PAREN_COMMENTS 2018-11-16 04:28:40 -06:00
Scott Lahteine 7a075a5dc9 Tweak extruder errors 2018-11-16 01:32:21 -06:00
Scott Lahteine 2d92f333f5 Fix GcodeSuite::T active_extruder reference 2018-11-15 14:07:24 -06:00
Scott Lahteine d2bb53702a
Optimize target_extruder, ignore T with mixing (#12432) 
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
 2018-11-14 17:33:04 -06:00
Scott Lahteine d82c350de7
Miscellaneous LCD code renaming, reordering (#12430) 
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
 2018-11-14 13:13:51 -06:00
Scott Lahteine 54ec5528a0 hasstatus => has_status 2018-11-14 01:34:28 -06:00
Roxy-3D cda5ef08fa
Debug of G2-G3 for UBL (#12386) 
Changes only affect UBL.  Everything else is left alone.
 2018-11-13 11:20:21 -06:00
Scott Lahteine 143b2896e0
Add M412 to enable/disable filament runout detection (#12406) 2018-11-12 21:29:46 -06:00
Scott Lahteine a163c89c6a Followup to 50af1d1 2018-11-12 20:31:53 -06:00
Scott Lahteine 50af1d1e08 Differentiate translated On/Off from Serial ON/OFF 2018-11-12 17:23:08 -06:00
Scott Lahteine da17f8ad37 For now (!) don't synchronize in M204 and M205 
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
 2018-11-12 02:43:24 -06:00
Scott Lahteine a0c795b097
Encapsulate common display code in a singleton (#12395) 
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
 2018-11-11 12:16:24 -06:00
Scott Lahteine 471f403a67 Reduce code size with plain inlines 2018-11-11 08:36:10 -06:00
Scott Lahteine 6093df11dc
Allow G26 to use the active extruder (#12387) 
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
 2018-11-10 18:07:38 -06:00
Scott Lahteine bed15fcd81 Tweak 'echo_not_entered' used by MBL's G29 2018-11-10 01:32:51 -06:00
Scott Lahteine 78ccedd6a8 Fix M91x sanity-check to permit TMC2660 
Fix #12362
 2018-11-09 05:48:15 -06:00
revilor b60abc7c37 [2.0.x] Macro G-codes (#9365) 2018-11-09 05:25:08 -06:00
InsanityAutomation 6471a75a22 Combine more tool-change variables (#12137) 2018-11-06 22:22:20 -06:00
Scott Lahteine 812f6a7dd7 Fix Resume from SD Pause 
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
 2018-11-06 21:09:37 -06:00
Scott Lahteine 488a17b3f5 Use IS_SD_PRINTING() more 2018-11-06 20:55:17 -06:00
Marcio Teixeira 4dbaa6369f Fix const pointer assignment compile error (#12350) 2018-11-06 19:49:39 -06:00
Scott Lahteine e574f01568
More advanced pause tweaks (#12356) 
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
 2018-11-06 19:25:57 -06:00
Scott Lahteine 4c5ca89d8c
Show the appropriate pause message (#12348) 2018-11-06 04:13:48 -06:00
Scott Lahteine b3b4e6dc45
Change Marlin debug flag names to fix conflicts (#12340) 
In reference to #11000
 2018-11-05 22:48:28 -06:00
Scott Lahteine 04f173790f Remove trailing whitespace 2018-11-05 22:38:20 -06:00
Scott Lahteine 486f2a66a9 Fix MBL XY parameter error messages 
Fix #11522
 2018-11-05 04:17:37 -06:00
Scott Lahteine 2613ddf61c Fix "circle" 2018-11-05 04:17:37 -06:00
Scott Lahteine 427bc64ba1 G28 O respects HOME_AFTER_DEACTIVATE 
Addressing #11271
 2018-11-05 04:17:37 -06:00
Scott Lahteine 498dfa291e Update and fix CHDK 2018-11-05 04:17:37 -06:00
Scott Lahteine 3cbc3ecdd7 Fix 'M43 T' to use 'L' as last pin 
- The documentation is correct. The code was wrong.
 2018-11-05 04:17:37 -06:00
Scott Lahteine 07a0822ebe M420 support in MARLIN_DEV_MODE 2018-11-04 20:54:38 -06:00
Scott Lahteine 44fa7fb18c Cleanups for leveling-related code 2018-11-04 19:07:47 -06:00
Scott Lahteine cc2bc67440 ENABLED(NEWPANEL) => HAS_LCD_MENU 2018-11-04 19:06:10 -06:00
Scott Lahteine f5eab912ed
Apply #pragma once, misc cleanup (#12322) 
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
 2018-11-04 02:25:55 -06:00
Scott Lahteine d1ff22b983 Revive SCARA's home offset (unimplemented) 2018-11-03 06:24:41 -05:00
Scott Lahteine e4cf175163
Synchronize on M204, M205 (#12302) 
* Add parser.seen for multiple parameters
* Fix M666, use !seen for report
* Synchronize on M204, M205
 2018-11-03 01:16:37 -05:00
Ludy 5ba6607181 Fix keypad-related compile error (#12306) 2018-11-02 22:29:32 -05:00
Scott Lahteine 3eb9838dca Simplify TMC sanity-checks 2018-11-02 01:15:49 -05:00
Scott Lahteine 31c28d0dd2
Drop pgm_read_*_near and let headers choose (#12301) 
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
 2018-11-02 00:42:16 -05:00
Ludy 9f77df2590 Followup to menu refactor. TMC warnings, sanity. (#12288) 
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
 2018-11-01 16:13:33 -05:00
Scott Lahteine 42f8b6c530
Make M125 work with SDSUPPORT (#12289) 2018-11-01 15:03:45 -05:00
Scott Lahteine 44f2a82a56 Move axis_homed, axis_known_position to motion.* 2018-10-31 17:44:42 -05:00
Chris Pepper 66d44c72c3 Add fast binary file transfer to SD card option (#12249) 2018-10-30 19:44:12 -05:00
Scott Lahteine 3583e2b449
Followup to Menu Refactor (#12275) 2018-10-30 16:34:45 -05:00
TheLongAndOnly 5536228359 G34 Auto-align multi-stepper Z axis (#11302) 2018-10-29 14:01:36 -05:00
Scott Lahteine 2bf18950ab Refactor LCD menus 2018-10-28 15:46:45 -05:00
MasterPIC 6fbc87301f 'G29 H' to set a centered square probe area (linear, bilinear) (#12242) 2018-10-27 20:30:21 -05:00
TheSFReader a07ac6312f G0 feedrate may be fixed or variable (#12172) 2018-10-25 10:35:16 -05:00
Ludy a93e9e6e9b Use preheat labels in place of PLA/ABS (#12194) 2018-10-23 15:38:17 -05:00
Scott Lahteine b381cad399 Clean up trailing whitespace 2018-10-19 15:27:17 -05:00
TheSFReader 1fb9b299d4 Add M524 to abort SD printing (#12155) 2018-10-19 14:25:07 -05:00
Scott Lahteine c6a5c74208 Add parentheses to SD macros 2018-10-19 13:52:57 -05:00
Marcio Teixeira 71e19baf69 Fix kill => disable_all_heaters => print_job_timer.stop (#12146) 
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
 2018-10-18 21:20:56 -05:00
InsanityAutomation 3ec3872730 Single Z raise value for all tool-changing / parking (#12090) 
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
 2018-10-17 11:11:41 -05:00
Marcio Teixeira f98f4ac7ea Fix and improve EXTENSIBLE_UI (#12117) 
- Add methods to access print counter data
- Clean up some inconsistent method names
- Clear lcd status after filament change
- Implement `lcd_reset_status` so it works like UltraLCD
 2018-10-16 16:58:29 -05:00
Scott Lahteine 8bf596bd4c RETRACT_ZLIFT => RETRACT_ZRAISE 2018-10-16 16:46:40 -05:00
Scott Lahteine bf0c809ff2 Update M165 comment 2018-10-16 06:10:27 -05:00
AnHardt 9ac9649183 Mixer - update descriptions (#12108) 2018-10-16 06:09:02 -05:00
AnHardt f56968ba0b New Continuous Filament Mixer (#12098) 2018-10-16 03:38:57 -05:00
Scott Lahteine 84b59d58fb Clean up whitespace 2018-10-16 02:02:20 -05:00
TheSFReader af939c158a Option for G0 to have a separate feedrate (#12089) 2018-10-16 01:49:51 -05:00
Scott Lahteine 951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Scott Lahteine 45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
Giuliano Zaro d43d4e4219 Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) 
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
 2018-10-10 21:25:43 -05:00
Scott Lahteine d556dc1865
Fix and improve EEPROM storage (#12054) 
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
 2018-10-10 09:45:20 -05:00
Scott Lahteine 07d33849b0 Fix unused var warning, apply ENABLED 2018-10-09 21:31:28 -05:00
Scott Lahteine ce82015d5f Fix include in G80 2018-10-09 17:24:56 -05:00
Scott Lahteine 5f6aabccbe Tweak M48 spacing 2018-10-08 19:11:25 -05:00
Marcio Teixeira 906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
InsanityAutomation ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
Scott Lahteine 55e810d512 Fix G80 compilation 2018-10-08 13:11:36 -05:00
Scott Lahteine 7db0113b53 Improve E_AXIS_N macro 2018-10-07 18:22:05 -05:00
Sam Lane f2ecf8d510 Add option to control Solenoids under PARKING_EXTRUDER (#12028) 2018-10-07 17:07:12 -05:00
InsanityAutomation 74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
Scott Lahteine d6b0fbd771
Use uint8_t for all fan speeds (#12032) 2018-10-07 15:34:41 -05:00
teemuatlut c447d75916 Add support for TMC2660 (#11998) 2018-10-06 17:18:10 -05:00
Scott Lahteine 52a37913c1 Extend and apply some corrections 2018-10-06 00:27:21 -05:00
thesfreader e09c144674 Add CNC-like G-code options 2018-10-06 00:15:27 -05:00
Scott Lahteine 3e58b3a5d4 Followup to #11943 2018-10-03 02:55:10 -05:00
teemuatlut c3229e1b34 Migrate to a new TMC library (#11943) 2018-10-03 02:48:49 -05:00
Eduardo José Tagle d6955f25b2 Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988) 2018-10-03 00:47:27 -05:00
Scott Lahteine 11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
AnoNymous b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Thomas Moore 3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Giuliano Zaro 70e7a465d8 [2.0.x] Fix compile error (#11951) 
Fix compile error intruduced with M109 modification
 2018-09-29 13:48:23 -05:00