zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
12729 commits 1 branch 0 tags 156 MiB
Commit graph

10826 commits

Author SHA1 Message Date
sjasonsmith 07b41a8c3f Include SOLENOID_PROBE in leveling report (#14344) 2019-06-22 17:54:37 -05:00
thisiskeithb 71b2700c3c Anycubic Trigorilla 1.4 Rev. 1.1 (#14357) 2019-06-22 17:53:45 -05:00
BigIronGuru f5afaaef5b Fix probe.cpp warning (#14367) 2019-06-22 17:27:33 -05:00
BigIronGuru def4bb987d Reset, stow BLTouch before mode change (#14368) 2019-06-22 17:26:02 -05:00
Scott Lahteine 78557076ff Add planner.synchronize to UBL G29 2019-06-22 17:23:29 -05:00
BigIronGuru 6578aa4e1b Apply minimum timing to BLTouch commands (#14369) 2019-06-22 17:20:19 -05:00
teemuatlut 2247bf1ba5 Add missing dedge init for TMC2209 (#14370) 2019-06-22 17:00:15 -05:00
mikeshub 1db7013e3b Fix and improve PID loops (#14373) 
- Windup guarding was missing. The kludge in place of windup guard is removed. D term filter calculations are simplified to require fewer `float` calculations. Sign change for D term output to make debugging output clearer.
- Use "no overshoot" for bed PID tuning.
 2019-06-22 16:52:56 -05:00
Scott Lahteine 17778d1c2a Fix M916-918 subcommands 2019-06-22 16:18:42 -05:00
Tanguy Pruvot be69ec5b32 Fix PLR/M43 warnings (#14333) 2019-06-22 00:48:47 -05:00
BigIronGuru 9c83135d40 Only home Z at the end of G34 (#14353) 2019-06-22 00:43:33 -05:00
InsanityAutomation 5df051fdee Fix Start SD Print bug (#14354) 
Followup to the G-code parser injection update.
 2019-06-22 00:37:21 -05:00
LinFor 0f6f5132c1 Fix variable conflict in ok_to_send (#14351) 2019-06-21 19:04:30 -05:00
MrMabulous c41b005f33 Add Extra Probing option, discarding outliers (#14338) 2019-06-21 19:02:26 -05:00
BigIronGuru 8f99d45045 Fix BLTOUCH deploy/stow in HS mode (#14352) 2019-06-21 18:55:27 -05:00
Tobias Frost eeaef2410a Support DGUS Display with DWIN OS (#13253) 2019-06-21 04:47:23 -05:00
Scott Lahteine bb0bcbaec0 Suppress compiler warning 2019-06-21 02:20:40 -05:00
Tanguy Pruvot 52383633e7 STM32F1: M43 PINS_DEBUGGING (#14072) 2019-06-21 01:20:17 -05:00
Karl Andersson 81d550754a Fix "UNUSED" redefined warning on HAL_STM32 (#14342) 2019-06-21 00:48:10 -05:00
Karl Andersson 4b365552db Fix Marduino SBI/CBI redefine (#14341) 2019-06-21 00:46:23 -05:00
InsanityAutomation a9acd2f497 G34 configurable angle limit (#14321) 2019-06-20 21:18:36 -05:00
Scott Lahteine a31cb910f5 Tweak some config spacing 2019-06-20 21:08:47 -05:00
Marcio Teixeira 49ea1c635a Fix missing dependencies (#14339) 2019-06-20 16:37:20 -05:00
Scott Lahteine 4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Tanguy Pruvot ed0c70f0a0 SKRmini followup - Fysetc config updates (#14327) 2019-06-20 05:49:27 -05:00
Scott Lahteine dd06017f64 Bring configs up to date 2019-06-19 01:03:51 -05:00
Scott Lahteine 9131b11944 Games in Info menu, if enabled 2019-06-19 00:03:32 -05:00
Scott Lahteine 4c872a01f2
G-code queue singleton, front injection (#14236) 2019-06-19 00:00:19 -05:00
Tanguy Pruvot 75aeb41ab7 SKRmini support for Fysetc Mini Panel (#14319) 2019-06-18 19:34:16 -05:00
InsanityAutomation bf64dd4db6 Improve G34, M422 (Z alignment) (#14142) 2019-06-18 07:02:18 -05:00
Tanguy Pruvot 391250b04f STM32F1: Don't toggle EEPROM SPI SS (#14299) 2019-06-18 06:48:20 -05:00
Giuliano Zaro 27d30c1be8 Update Italian language (#14302) 2019-06-18 06:45:34 -05:00
Scott Lahteine 3f6424076b Update M524 description 2019-06-18 05:04:55 -05:00
Scott Lahteine cf3631226b Document G-code M290 2019-06-18 04:53:31 -05:00
Scott Lahteine c12b6ba760 Add Dagoma F5 to Makefile 2019-06-18 04:40:00 -05:00
3DSmitty 5b13abcacb Fix SPI_SD Outside of HAL_STM32F1 (#14306) 2019-06-18 02:38:18 -05:00
Bob Kuhn 089d12df16 Fix duplicate board IDs (#14310) 2019-06-18 02:26:13 -05:00
Ludy 2290b269dc Unused variable (#14301) 2019-06-18 00:15:41 -05:00
Scott Lahteine 6b2d42434c Wrap main menu external declarations 2019-06-17 21:44:56 -05:00
Scott Lahteine aacb904e1f Adjust some config comments 2019-06-17 20:22:07 -05:00
Scott Lahteine 651f3eeed0 Clean up trailing whitespace 2019-06-17 20:22:07 -05:00
Ludy 35aabd1834 Fix Spindle/Laser compile error (#14312) 2019-06-17 18:38:43 -05:00
Scott Lahteine 21f377d94a
STM32F1: various small changes (#14313) 
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
 2019-06-17 17:48:50 -05:00
sensei73 ce5f94c8f4 Fix Touch-MI sanity checks (#14316) 2019-06-17 17:46:14 -05:00
Tanguy Pruvot 287df7a61f STM32F1: various small changes 
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
 2019-06-17 10:27:30 +02:00
3DSmitty 66d51272af Fix SPI, SD for BIGTREETECH SKR Mini (#14287) 2019-06-15 18:12:05 -05:00
Scott Lahteine 903863dcb6 Suppress some warnings 2019-06-15 17:47:59 -05:00
Scott Lahteine eb1c9113c2 Try to init SD with no detect pin 2019-06-15 15:36:48 -05:00
Scott Lahteine 9a56a88200 Use OUT_WRITE in SPI pin init 2019-06-15 15:36:43 -05:00
Scott Lahteine 24c23b60fa Use lambda, fix wrap pointer 2019-06-15 15:36:42 -05:00
pinchies 3021097888 Add JGAurora A5S and A1 (STM32F103ZET6) (#14291) 
- Now compiles and works correctly with changes to HAL timers and watchdog.
- Does NOT include awesome work on touch screen function.
- Does have working LCD and SD-based EEPROM.
 2019-06-15 14:28:22 -05:00
Ludy 6fb3db1633 Update German language (#14294) 2019-06-15 14:26:14 -05:00
Scott Lahteine a17f057daa
Fix word wrapping on select screens 2019-06-15 14:06:23 -05:00
Tanguy Pruvot f2cfa408b7 Touch-MI probe by hotends.fr (#14101) 
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
 2019-06-14 22:19:48 -05:00
Scott Lahteine 26de051e92 HAL SPI pin init cleanup 2019-06-14 20:17:25 -05:00
Scott Lahteine 50c9b33ed7 !ENABLED => DISABLED 2019-06-14 00:44:49 -05:00
teemuatlut 29afd11cbf Updates for TMC2660 init (#14245) 2019-06-13 23:16:10 -05:00
Scott Lahteine dfdbd1e75f Use TEST macro where possible 2019-06-13 20:59:12 -05:00
teemuatlut 12a270fd29 Fix TMC5160 and TMC2160 PWMCONF init 2019-06-13 20:57:12 -05:00
Scott Lahteine fc73a8b004 Add AXIS_HAS_SQUARE_WAVE shorthand 2019-06-13 20:57:12 -05:00
mb300sd bf8bfb5c66 Add Coolant Control M7/M8/M9 (#10745) 2019-06-13 18:43:11 -05:00
Aliaksei Kvitsinski 648a91bce8 Support for Z-Bold board (#14024) 2019-06-13 03:21:18 -05:00
MastS 18904c42f6 Fysetc LCD backlight timeout (#14265) 2019-06-12 21:59:39 -05:00
Scott Lahteine bc2ff9b41f Fix M605 bugs 
Fixes #14191
 2019-06-12 20:01:08 -05:00
Scott Lahteine f7792c0192 Group manual move options 2019-06-12 19:49:18 -05:00
Tanguy Pruvot 7d1eafc80a STM32F1: C++14 for static_assert, etc. (#14278) 2019-06-12 18:44:32 -05:00
Msq001 26e7e33698 Fix bug in STM32F1 WRITE macro (#14275) 2019-06-12 06:30:24 -05:00
Scott Lahteine 04715e04ee Minor M100 cleanup 2019-06-12 06:14:40 -05:00
Scott Lahteine 356410dcfc Move crc16 function to libs 2019-06-12 06:14:39 -05:00
Scott Lahteine 2a96d4e23a Move number-to-string functions to libs 2019-06-11 07:51:47 -05:00
Scott Lahteine 1ef95013f0 Update Marlin.cpp includes, defines 2019-06-11 07:30:51 -05:00
Kaushik Vemparala c88d9ae282 Option to leave heaters set on SD abort (#14251) 2019-06-10 23:57:55 -05:00
Tanguy Pruvot 8cf5504a34 Redundant but faster recovery.enabled test (#14175) 2019-06-10 23:33:35 -05:00
Tanguy Pruvot c3e5225531 Add SPI EEPROM to STM32F1 (#14239) 2019-06-10 23:30:23 -05:00
felixstorm 9439fab7fd Fix ESP32 servos, platformio.ini, etc. (#14247) 2019-06-10 23:22:19 -05:00
yangwenxiong b0a4ea79b8 BigTreeTech SKR Mini v1.1 (#14041) 2019-06-10 21:10:51 -05:00
Robby Candra f30b89953d runout.distance_mm LCD edit item (#14066) 2019-06-10 20:18:06 -05:00
mikeshub a3f034b95e FFCP updates. Update XY soft endstops on tool_change (#14125) 2019-06-10 18:01:42 -05:00
InsanityAutomation b7eeb5b13b Move BLTouch options to adv config (#14131) 
Plus other BLTouch and menu enhancements.
 2019-06-10 17:46:42 -05:00
Scott Lahteine 0ca2073625 ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT 2019-06-10 17:28:35 -05:00
thisiskeithb 662e7da8a4 Fix USE_BIG_EDIT_FONT bug (#14252) 2019-06-09 19:37:14 -05:00
teemuatlut cccc51ee0e TMC Square Wave Stepping mode (#14195) 2019-06-09 05:08:05 -05:00
Scott Lahteine 80ce0d2bdb Whitespace cleanup 2019-06-08 06:40:44 -05:00
Scott Lahteine 455f0de817 Undefine sanity check tests when done 2019-06-08 06:29:28 -05:00
Robby Candra 7e07a3888b Fix PLR Z bug affecting Cartesians (#14230) 2019-06-08 05:27:58 -05:00
Robby Candra 5ca8d51e12 Ability to insert G-code in front of queue (#14229) 2019-06-08 05:23:53 -05:00
BigIronGuru 293018f76c Apply needed BLTouch patch (#14233) 2019-06-07 21:43:20 -05:00
Scott Lahteine ffb76b75d7
fix TMC2208 boot loop with SW UART (#14135) 
Need stepper .begin() before calling susbequent .push()
 2019-06-07 07:27:10 -05:00
InsanityAutomation 4138b1f9ae Option to disable Case Light brightness control (#14165) 2019-06-07 07:23:42 -05:00
Tanguy Pruvot 764f0d9c1c STM32F1: Servo "soft" PWM via timer interrupt (#14187) 2019-06-07 07:11:48 -05:00
InsanityAutomation 66e22d9f5a ExtUI Heated Chamber support (#14198) 2019-06-07 07:08:41 -05:00
Scott Lahteine 9206c0e869 Use limit switch overrides 2019-06-05 22:27:06 -05:00
Scott Lahteine 34d2801bbe Rename pins file (2) 2019-06-05 21:41:58 -05:00
Scott Lahteine fa3b5fb059 Uppercase pins filename 2019-06-05 21:41:58 -05:00
Scott Lahteine 858b2fa21a Fix thermistor table 2019-06-05 21:39:39 -05:00
InsanityAutomation f6ec00d776 Update thermistor and working config 2019-06-04 20:25:00 -04:00
InsanityAutomation bbcb61e042 Initial Commit - Add board 2019-06-03 23:49:19 -04:00
Tanguy Pruvot e4260a41cb Fix a DEBUG_LEVELING_FEATURE string copy (#14200) 2019-05-31 18:52:11 -05:00
Ryan 9d9030a39c Fix Archim1 SD card (#14184) 2019-05-30 19:58:38 -05:00
InsanityAutomation 123e58d9c3 Heated Chamber for Graphical LCD (#14190) 2019-05-30 18:31:50 -05:00
Scott Lahteine 93ab16c6e4 Remove old mixing ISR comment 2019-05-30 17:05:16 -05:00
Scott Lahteine 6572848d7f Fix stepper timing bug 2019-05-30 16:58:53 -05:00
Bob Kuhn 688b54d66a DUE USB composite device field corrections (#14185) 2019-05-30 16:26:48 -05:00
InsanityAutomation f889cc6ea6 ExtUI parity with SPI LCDs (#14172) 2019-05-30 16:24:13 -05:00
Scott Lahteine 07021c85c8 Tweak timer16_Sequence_t 2019-05-30 16:09:37 -05:00
Roman Moravčík d70929f7c0 Update Slovak language (#14179) 2019-05-30 15:57:14 -05:00
Tanguy Pruvot e3a468f2cd STM32F1: FSMC only on chips with 100/144 pins (#14180) 2019-05-30 15:51:02 -05:00
Ludy 8e8e48f900 Fix links in templates, gcode.h (#14160) 2019-05-28 21:39:55 -05:00
InsanityAutomation 34ae76025e Clear Pausing message after M600 park (#14171) 2019-05-28 21:36:14 -05:00
Ludy bd494a6bd6 Update defines for patched temperature macros (#14161) 2019-05-28 17:43:31 -05:00
doggyfan e09d8811c1 Apply grace period to thermistor failure testing (#14167) 2019-05-28 15:36:03 -05:00
InsanityAutomation 0f04ba016f Adjust tool offset menus (#14153) 2019-05-27 21:29:08 -05:00
teemuatlut bf4a0db97f TMC LCD followup (#14134) 2019-05-27 21:24:20 -05:00
Minims 32afe1d102 Fix TOOLCHANGE_ZRAISE warning (#14156) 2019-05-27 19:51:29 -05:00
Robby Candra 5515f88452 Clarify SD longname string size (#14148) 2019-05-27 19:50:48 -05:00
Tanguy Pruvot 5f42d3a8b4 BLTouch French updates (#14137) 2019-05-27 01:02:35 -05:00
Scott Lahteine d3bb5b69ba Apply NOLESS/NOMORE 2019-05-26 20:55:00 -05:00
Scott Lahteine b315157053 Apply const to mcp4728 2019-05-26 20:54:24 -05:00
Scott Lahteine 3c179bbd47 Simpler G28 home axis conditions 2019-05-26 16:26:55 -05:00
Scott Lahteine 352734494b Reduce some M43 strings 2019-05-26 16:21:28 -05:00
Scott Lahteine b14cc0d7c5 Remove extra gcode. prefix 2019-05-26 16:18:45 -05:00
Scott Lahteine c6d39319de Fix some whitespace 2019-05-26 16:18:43 -05:00
InsanityAutomation 212860f090 Always change to Tool 0 on G29 (#14146) 2019-05-26 14:53:21 -05:00
Giuliano Zaro 7b838f31be DUE HAL cleanup (#14126) 2019-05-26 14:51:32 -05:00
Chris 36a0376c36
fix TMC2208 boot loop with SW UART 
Need stepper .begin() before calling susbequent .push()
 2019-05-26 13:07:12 +02:00
Robby Candra df7733425c Shorten pause message for 4 line LCD (#14097) 2019-05-26 02:33:52 -05:00
Scott Lahteine 605ec0a478 Fix thermistor table warning 2019-05-26 01:30:20 -05:00
doggyfan 90121047d9 Fix thermal protection with user thermistor (#14130) 2019-05-25 23:37:08 -05:00
Scott Lahteine 81cee05476 Update some env in pins.h 2019-05-25 23:17:50 -05:00
Scott Lahteine 47fd74a98d Clean up fast_pwm.cpp 2019-05-25 23:05:01 -05:00
Scott Lahteine 49229d97db Consistent _useTimerX tests 2019-05-25 23:05:01 -05:00
Scott Lahteine 8924389dfc Tweak servo µs macros 2019-05-25 22:33:51 -05:00
InsanityAutomation 49e83dd7c8 BLTouch V3.1 changes (#14104) 2019-05-25 21:56:47 -05:00
Scott Lahteine 14fe41f6b2 Update Z probe offset comment 2019-05-25 19:41:15 -05:00
Scott Lahteine f8bede6b5e Fix some HAL includes 2019-05-25 19:20:17 -05:00
Bryan 0ef5d667b6 Fixed M43 parameter bug (#14099) 2019-05-25 18:23:25 -05:00
teemuatlut 1c86fbc60b TMC updates, capture LCD changes (#14074) 2019-05-25 18:22:12 -05:00
felixstorm 74f44783ac ESP32 servo support (#14109) 2019-05-25 18:12:24 -05:00
felixstorm bc5a1fe562 Various fixes for ESP32 (#14102) 2019-05-25 17:06:00 -05:00
Giuliano Zaro e1bf34bdc9 Ruramps4d typo fix (#14096) 2019-05-25 16:41:08 -05:00
Scott Lahteine 7cce6b8d68 Bring configs up to date (MANUAL_FEEDRATE) 2019-05-25 16:31:13 -05:00
Scott Lahteine 44caf70917 Improve editing, fix some small value editing 2019-05-25 15:29:00 -05:00
Scott Lahteine 612eaa87bd Fix "back" items in some sub-menus 2019-05-25 15:28:52 -05:00
Scott Lahteine c5dc2e5a71 Update advanced BLTouch menu items 2019-05-25 15:26:25 -05:00
Scott Lahteine 48d1bd29cb Shift m before compare to 0 2019-05-25 15:22:15 -05:00
InsanityAutomation 9f69fbe5ee Move some menu items (#14118) 2019-05-25 15:16:00 -05:00
Scott Lahteine fc52c43a26 Some documentation updates 2019-05-24 16:30:44 -05:00
Tanguy Pruvot 24b1818245 Secure STM32F1 servo code and M280 detach (#14085) 2019-05-22 16:57:19 -05:00
Scott Lahteine a49919396a LPC1768 MarlinServo => libServo 2019-05-22 16:54:52 -05:00
Scott Lahteine 2b5046659a Tweak Marlin headers, comments 2019-05-22 16:54:52 -05:00
Scott Lahteine cc862a8213 Replace some functions with lambdas 2019-05-22 16:54:35 -05:00
Ludy fafd73a3af Update copyright in headers (#14092) 2019-05-22 16:24:13 -05:00
Giuliano Zaro 2298923a9b Update Italian language (#14095) 2019-05-22 16:23:41 -05:00
Ludy 41f61a12b8 Update German language (#14093) 2019-05-22 16:23:16 -05:00
doggyfan 594f6b14be Limit user thermistor to 999, fix thermistor table macro (#14080) 2019-05-21 21:31:05 -05:00
Giuliano Zaro a74aad3b4a Clean up HALs / FastIO (#14082) 2019-05-21 18:28:12 -05:00
Scott Lahteine 4ef364a073 Sanity check probe offsets must be integers 2019-05-21 17:16:21 -05:00
Scott Lahteine cfca07852a Backlash linker error workaround 
Fix #14045
 2019-05-20 21:52:56 -05:00
Scott Lahteine aeec9ef76b Update backlash code 2019-05-20 21:34:08 -05:00
Scott Lahteine 7b4c3bd92a Fix call to synchronize in lcd_pause_job 2019-05-19 15:51:45 -05:00
Scott Lahteine 9bf65eacaa Remove old adv config heading 2019-05-19 15:24:01 -05:00
Pavel4e5 3cd19a8ec0 Improve Zonestar keypad responsiveness (#14056) 2019-05-18 20:52:55 -05:00
Tanguy Pruvot 402f1f7307 STM32F1: STM32_HIGH_DENSITY is auto defined in HAL (#14057) 
- Fix the `fsmc` and `sdio` units which required hard defines for use.
 2019-05-18 20:45:22 -05:00
Tanguy Pruvot 87e7193259 Fix M226 sign warning (for most platforms) (#14049) 2019-05-18 16:15:48 -05:00
Tanguy Pruvot 256f810df2 Add open-drain output mode to STM32F1 FastIO (#14050) 
- This mode is often used/preferred to drive printer boards' MOSFETs.
- Can generally boost the allowed output power (for hotbed,nozzle and fans).
 2019-05-18 16:12:00 -05:00
Bob Kuhn 1dad6e754b Neopixel background LED option (#14025) 2019-05-18 02:36:37 -05:00
InsanityAutomation 84ac5b360b Fix ExtUI mesh functions (#14027) 2019-05-17 20:37:23 -05:00
Scott Lahteine 9b5f9dda0e Update analog pins labels 2019-05-17 20:22:25 -05:00
FanDjango 85fb33a060 BLTOUCH tweaks, new v3.1 command (#14015) 2019-05-17 19:10:18 -05:00
GUEST.it 62ef54cb81 UBL: Log and display G29 progress (#14036) 2019-05-17 19:02:21 -05:00
GUEST.it 7907eec04c Fix power loss recovery with SINGLENOZZLE (#14033) 2019-05-17 18:47:15 -05:00
Scott Lahteine efe651e749 Add THERMISTOR_NAME for 1000 2019-05-17 18:26:53 -05:00
Scott Lahteine 0b056970c6 Fix file.open in STM32 eeprom emu 2019-05-17 18:26:53 -05:00
InsanityAutomation 06f3273531 Fix DELTA pulse wait bug (#14028) 2019-05-17 16:16:56 -05:00
Marcio Teixeira 7ccbcf2eaa Fix TMC EEPROM regression (#14008) 
Partially undo 15357af to ensure TMC code is initialized in the proper order.
 2019-05-16 20:38:03 -05:00
Marcio Teixeira 9558962d59 Fix DUE HAL SW SPI compile error (#14005) 2019-05-16 20:36:19 -05:00
InsanityAutomation 07afe69cee Fix some bad AZTEEG_X5_MINI pins (#14011) 2019-05-16 20:33:00 -05:00
Chris Pepper 451ea996c9
[LPC176x] Fix switch fallthrough 2019-05-15 10:35:26 +01:00
Tanguy Pruvot d7b0369e39 STM32: Fix SD EEPROM emulation conflict (#14012) 2019-05-15 02:42:10 -05:00
Scott Lahteine 785c01f2bc Use US spelling of 'behavior' 2019-05-15 01:49:17 -05:00
Sam Lane 7f1e0c5670 Update EXTRA_LINADV_K with Marlin bit macros (#13993) 2019-05-15 01:07:07 -05:00
Bob Kuhn 48bd8899bd Cohesion 3D Remix: Onboard SD card, Fysetc LCD (#13991) 2019-05-15 00:59:57 -05:00
FanDjango dcaefc68a5 BLTouch.init should not deploy (#13988) 
Low or unknown probe clearance on init (even at powerup) is a risk and therefore, a deploy should be avoided because dragging the pin is possible: A deploy goes into alarm if it can't extend fully and then the subsequent stow will fail.
 2019-05-14 23:55:11 -05:00
Tanguy Pruvot 8075893352 STM32: fix sdcard filename conversion 2019-05-12 04:26:21 +02:00
chai-md 940ff8e7c8 Improve LV8729 stepping (#13776) 2019-05-11 19:02:19 -05:00
InsanityAutomation 991ee7552b Restore menu edit to 32bit value (#13976) 2019-05-11 18:44:35 -05:00
Tanguy Pruvot 93dd097b1c Use E2END, if defined, for STM32F1 (SD) (#13981) 2019-05-11 18:22:31 -05:00
InsanityAutomation 5108e4b6aa Cleaner EEPROM auto init (#13975) 2019-05-11 16:54:03 -05:00
Bob Kuhn 456a0ee76b Improve Due SW SPI, Fysetc sanity checks, &c. (#13939) 2019-05-11 16:51:39 -05:00
Robby Candra 7b78a20fb7 Fix: Debug Memory Dump size (#13957) 
* Fix Memory Dump size

* Fix Compile error on Memory Dump
 2019-05-11 11:44:39 -05:00
Scott Lahteine a613bcad2d Fix some spelling 2019-05-10 20:39:19 -05:00
Tanguy Pruvot 62b36d1b98 Fix STM32 timer warnings (#13946) 2019-05-10 20:00:21 -05:00
Giuliano Zaro f22c9a1ae1 Fix G-code parser with MMU2 (#13951) 2019-05-10 19:57:15 -05:00
Marcio Teixeira 746c38f4be Fix HAL_DUE multiple define error with graphical LCD (#13971) 2019-05-10 19:52:43 -05:00
Bob Kuhn 75eca5c4f8 Fysetc pins updates for RAMPS and SKR 1.3 (#13963) 2019-05-10 19:29:28 -05:00
Marcio Teixeira 227f29090d Add heater timeouts to ExtUI (#13970) 
- Add local UI methods to get heater timeout state.
- Add methods to resume timed-out heaters.
- Re-enable heaters on UI temperature request.
- Make `ExtUI` show a dialog box if pause needs a button press after reheat.
 2019-05-10 15:56:13 -05:00
Bob Kuhn fa3739aa23 M100: LPC1768 and DUE compatibility (#13962) 2019-05-09 21:57:44 -05:00
InsanityAutomation 3f758d9e00 Fix some edit items for 16-bit encoder (#13948) 2019-05-09 18:28:47 -05:00
ManuelMcLure 51acbb2201 Prevent HOST_PROMPT_SUPPORT compile error (#13943) 2019-05-09 11:48:31 -05:00
Scott Lahteine ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
Tanguy Pruvot e53d7e5517 STM32: ADC warning fix (#13933) 2019-05-09 00:33:38 -05:00
Scott Lahteine 23ec650410 Consolidate Malyan LCD and ExtUI 2019-05-07 21:31:30 -05:00
InsanityAutomation 6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
Giuliano Zaro 40aff7e1f2 Remove extra MMU (non-12V) code (#13938) 
`check_version` in state -5 should not be needed since it has already been called in state -4 and the tested build nr is only updated in state -4.
 2019-05-07 21:02:08 -05:00
Tanguy Pruvot 11adcf1ce3 Add'l PLR options, AVR strstr_P compat (#13880) 2019-05-07 20:38:40 -05:00
InsanityAutomation 5dcb25664f Option to Auto-Initialize EEPROM (#13935) 2019-05-07 16:30:31 -05:00
Ludy a504366138 Fix probe fan compiling error (#13930) 2019-05-07 14:14:12 -05:00
Tanguy Pruvot 24e956d168 Avoid int8_t underflow on filament runout (#13895) 2019-05-07 13:58:10 -05:00
Stephan 483822f3aa Fix some THERMAL_PROTECTION_CHAMBER issues (#13678) 2019-05-06 19:55:01 -05:00
doggyfan 23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
J.C. Nelson 172abc305b Malyan M200 core fixes (#13927) 2019-05-06 18:07:13 -05:00
Scott Lahteine a36782ac1d Define more u8g command macros 2019-05-06 17:26:34 -05:00
Scott Lahteine f9a50f451d Serial out cleanup 2019-05-06 17:26:34 -05:00
Scott Lahteine 9853331b34 Fix temp init, loosen ADC grace period 2019-05-05 22:55:03 -05:00
Tanguy Pruvot a4c24511f7 STM32: Fix Marduino SBI/CBI redefine (#13912) 2019-05-05 22:06:30 -05:00
Ludy c837e9250c Define tmc variables where needed (#13918) 2019-05-05 22:04:47 -05:00
Ludy f96eaad1ea Unused variable cleanup (#13917) 2019-05-05 22:01:04 -05:00
Ludy 421d526ba7 Update German language (#13915) 2019-05-05 22:00:19 -05:00
Giuliano Zaro b07360f32a Update Italian language (#13916) 2019-05-05 21:59:34 -05:00
Robby Candra 79955f0c89 Fix PLR file delete bug (#13860) 2019-05-04 23:30:47 -05:00
ManuelMcLure 09f1b58146 Fix HOST_PROMPT_SUPPORT compile issue (#13847) 2019-05-04 22:55:51 -05:00
Giuliano Zaro e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Robert Mendon 24177954dd Add missing AZSMZ Mini SPI pins (#13824) 2019-05-04 22:04:01 -05:00
kAdonis ee73e17c9b Hide 'vsense' report row if not used (#13884) 2019-05-04 22:00:24 -05:00
jmdearras 68004174d9 Fix thermistor 501 name (#13839) 2019-05-04 21:40:41 -05:00
Bob Kuhn c48e6be366 Fysetc panel, RUMBA and ReARM pins, SPI mode 3 (#13900) 2019-05-04 17:59:36 -05:00
Chris fd9d3ae181 Re-Arm 4x TMC2208 stepper improvement (#13819) 2019-05-04 17:26:13 -05:00
Tanguy Pruvot e7b3720b81 Menu edit accel in increments of 25 (#13850) 2019-05-04 17:21:58 -05:00
Tanguy Pruvot 7da63fa03f Fix NOMORE() sign warning in stepper (#13894) 2019-05-04 15:59:38 -05:00
Roman Moravčík 6d0ce033c2 Update Slovak language. (#13840) 2019-05-04 15:58:01 -05:00
InsanityAutomation 3fcab8dbf1 Option to disable fans during pause (#13820) 2019-05-04 15:50:44 -05:00
Chris Pepper 66f7065248
[LPC176x] Update extra script to support Python3 (#13908) 2019-05-04 20:52:28 +01:00
Scott Lahteine 2f32a6612d Clean up Temperature::set_fans_paused 2019-05-04 14:36:59 -05:00
Marcio Teixeira 15357af67c Backlash cleanup (#13659) 
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
 2019-05-03 23:53:15 -05:00
Robby Candra 0181e57417 Add a minimum Z change option to power-loss recovery (#13859) 2019-05-02 22:29:05 -05:00
Robby Candra c369477cb0 Fix bug: diveToFile breaks M23 (#13865) 2019-05-02 15:54:24 -05:00
Tanguy Pruvot e5438a9a03 settings: store runout sensor on/off (#13876) 2019-05-02 00:47:26 -05:00
Scott Lahteine e7682eea42
Use Arduino.h include wrapper (#13877) 2019-05-02 00:45:50 -05:00
Tanguy Pruvot 51d1e0f1dd Auto-mount the SDIO SD card (#13879) 2019-05-02 00:45:21 -05:00
Thomas Moore ee243e4edf Fix mixing extruder filament change (#13803) 2019-05-01 21:55:58 -05:00
Scott Lahteine bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871) 2019-05-01 20:05:29 -05:00
Scott Lahteine 9372e2603c Simpler neopixel comment 2019-05-01 13:55:51 -05:00
Tanguy Pruvot 3272d0db01 Update French language (#13866) 2019-05-01 13:00:07 -05:00
Chris Pepper 95beafa9a2
Fix typo 2019-05-01 16:30:21 +01:00
Ludy 408a5f08dc Update German language (#13853) 2019-05-01 01:25:57 -05:00
Tanguy Pruvot cf3c746029 Improve French language (#13851) 2019-05-01 01:12:25 -05:00
Clinton James 2740cc64d8 Add SD Release when no SD_DETECT_PIN exists (#13857) 2019-05-01 01:00:21 -05:00
Luu Lac 39ebca6b5f Fix FYSETC, MINIPANEL, MKS_MINI_12864 display (#13864) 2019-05-01 00:37:52 -05:00
Giuliano Zaro 93dcb537ef Update Italian language (#13809) 2019-04-30 20:31:40 -05:00
Roxy-3D 142c8e2fed
Remove redundant Frivolous Game Options 2019-04-28 14:03:53 -05:00
Scott Lahteine e43afb1a58 Clean up SKR pins 2019-04-27 14:56:12 +02:00
Scott Lahteine 9ccbd382e7 Update Watchdog description 2019-04-27 14:56:12 +02:00
Scott Lahteine b6279abd30 Better THERMAL_PROTECTION_GRACE_PERIOD 
See #13783
 2019-04-27 14:40:09 +02:00
chai-md ed9eaa1942 Fix a comment in fwretract.cpp (#13802) 2019-04-26 09:36:29 +02:00
InsanityAutomation 610fb46683 Fix some ExtUI issues (#13799) 2019-04-26 09:32:01 +02:00
Bob-the-Kuhn db89fc0304 Revert "bring my copy up to date" 
This reverts commit 503905c628.
 2019-04-25 17:38:41 -05:00
Bob-the-Kuhn 503905c628 bring my copy up to date 2019-04-25 12:08:49 -05:00
Bob-the-Kuhn 73726d56b3 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-25 12:06:01 -05:00
Scott Lahteine 5051909c3c
Update do_select_screen for general use (#13800) 2019-04-24 10:13:44 -05:00
Scott Lahteine 63f6ad3fd2 Basic RAMPS SD_DETECT_PIN override 2019-04-23 18:10:21 -05:00
InsanityAutomation c6632925e3 Force no move on IDEX full control mode (#13797) 2019-04-23 15:20:59 -05:00
Giuliano Zaro e2dd2268e8 Add a Z raise-between-probes to G34 (#13791) 2019-04-23 13:40:55 -05:00
Giuliano Zaro 0f9c49ccba Update Italian language (#13790) 2019-04-23 13:36:05 -05:00
Giuliano Zaro d77ef437db Fix warning for redefined DEBUG_PRINT_P (#13789) 2019-04-23 13:35:02 -05:00
Marcio Teixeira ca7f6ff287 Fix MSG_En messages for consistency (#13788) 2019-04-23 13:31:51 -05:00
Scott Lahteine 6ff81a33c1 Provide JSON values for SOFT_PWM_SCALE 2019-04-22 14:06:14 -05:00
Scott Lahteine 0c4d3e6622 Improve M906 description 2019-04-22 13:48:02 -05:00
Tanguy Pruvot 04ae3ba1fd Major update to French language (#13784) 2019-04-22 13:31:04 -05:00
chai-md 78d7349fd7 Remove extra Z raises in tool change (#13782) 2019-04-21 21:06:46 -05:00
Kajetan Rzepecki 875e673a8c Add HAL-based thermal protection grace period for all heaters (#13778) 2019-04-21 20:50:32 -05:00
Bob Kuhn 81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 2019-04-21 20:48:53 -05:00
felixstorm 4e35e6c705 Fix SS pin in ESP32 HW SPI (#13781) 2019-04-21 17:15:15 -05:00
felixstorm 4a48b70c0b Fix (re-)defines in HAL_ESP32 (#13780) 2019-04-21 17:14:38 -05:00
Ludy 4228fd3e03 Update German language (#13769) 2019-04-20 15:01:56 -05:00
Kajetan Rzepecki 5f70c876ae Fix _temp_error-related compile error (#13768) 2019-04-20 13:57:38 -05:00
Kajetan Rzepecki ea1ee02b53 Disable hardware PWM on ESP32 I2S expander (#13762) 2019-04-20 13:41:17 -05:00
Scott Lahteine bddb776ddb Add chamber max-temp check 
Followup to #13756
 2019-04-19 22:18:55 -05:00
Marcio Teixeira d0c1eee53b Add extra max-temp safety checks (#13756) 2019-04-19 21:37:12 -05:00
Marcio Teixeira 4ac28ba6b3 Add missing file (#13754) 2019-04-19 20:20:45 -05:00
jmdearras b65cb5704d Fix, improve FYSETC_MINI_12864 support (#13730) 2019-04-19 20:11:51 -05:00
Scott Lahteine 69c333ead9 More universal Formbot pins 
Replace `ROXYs_TRex` with pre-defines of the relevant pins at the configuration level.
 2019-04-18 21:09:34 -05:00
Scott Lahteine 0a6835fbea More robust HAS_LCD_CONTRAST 2019-04-18 21:09:34 -05:00
Marcio Teixeira 2e3d121ac4 Squelch compiler warning (#13739) 2019-04-18 13:18:49 -05:00
Kajetan Rzepecki d83a7924e6 Fix ESP32 TOGGLE() with I2S expander (#13743) 2019-04-18 13:15:35 -05:00
Jimmy Wennlund e6f6ed76c8 Show UBL Activate/Deactivate menu for current state (#13744) 2019-04-18 13:13:05 -05:00
Marcio Teixeira 08f21335a6 Fix bad opcode in LIGHTWEIGHT_UI; add 32-bit HAL and Due compatibility (#13751) 2019-04-18 13:10:58 -05:00
Kajetan Rzepecki 7c8ee0cd5b Enable more ADC1 channels (pins 32-39) (#13742) 2019-04-18 13:01:24 -05:00
Bob-the-Kuhn 520585c5ed Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-17 15:34:29 -05:00
Kajetan Rzepecki e1acc09c6e Fix LPC1768 HAL SSD* screen init (#13741) 2019-04-17 14:57:50 -05:00
Marcio Teixeira 836435c5ef Fix action_edit int range bug (#13737) 2019-04-17 14:55:31 -05:00
Antonio Pérez bf28ad4b6c Fix clear of Z position last digit (#13731) 2019-04-17 14:52:20 -05:00
Marcio Teixeira 866e2d41dc Correct range of LCD axis step editing (#13727) 2019-04-16 15:45:31 -05:00
Scott Lahteine ab8052887f Add missing MSG_PAUSE_PRINT_INIT_1 for en 2019-04-16 13:54:20 -05:00
petrzjunior 12d340cf2a Update Czech language (#13729) 2019-04-16 13:53:14 -05:00
Robby Candra e8dc87a2b7 Fix updated Allen Key pause probe logic (#13723) 2019-04-16 12:35:58 -05:00
Robby Candra 7ca1fea22b Option to pause probe deployment only when triggered, for manually-deployed allen-key probe (#13698) 2019-04-16 01:32:43 -05:00
Robby Candra 35160dfb7a Simplify PLR homing when Z homes to max (#13718) 2019-04-16 00:17:27 -05:00
Scott Lahteine 92ed9a2bb6 Fix is_M29 
Followup for #13013
 2019-04-15 23:47:06 -05:00
jmdearras 5f49b65c1f Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712) 2019-04-15 22:55:33 -05:00
Bob Kuhn 9b578ca343 Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE (#13717) 2019-04-15 22:54:11 -05:00
Scott Lahteine 9992c424f5 Patch G92.9 flags 
Followup to #13703
 2019-04-15 20:26:40 -05:00
ManuelMcLure b1c13bce58 Fix EEPROM_CHITCHAT (and debug_out.h) (#13716) 2019-04-15 20:21:26 -05:00
Msq001 455ee23499 Fix, improve Power Loss Recovery (#13703) 
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
 2019-04-15 18:53:39 -05:00
Laurent df75a606ff Support MKS SGen board (#13694) 2019-04-15 17:03:10 -05:00
Kajetan Rzepecki 20dc45bca7 Refactor, fix ESP32 WebSocketSerial (#13689) 2019-04-15 16:32:20 -05:00
Roman Moravčík db373f130c Update Slovak language (#13692) 2019-04-15 16:14:49 -05:00
Kajetan Rzepecki 6fe90f0324 Define I2S pins for ESP32 (#13714) 2019-04-15 16:13:59 -05:00
InsanityAutomation aa0f7afbe6 Fix call to uninitialized PWM pin, heater 2 overlap (#13674) 2019-04-15 15:57:34 -05:00
Bob-the-Kuhn 57aaa9110b Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-13 21:14:52 -05:00
Scott Lahteine 6a71df2925 Tweak babystep add_steps 2019-04-13 14:14:26 -05:00
Bob-the-Kuhn 9dd4252b39 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-12 22:07:12 -05:00
Marcio Teixeira bdfffee037 Modify Z-offset overlay for clarity (#13660) 2019-04-12 15:43:29 -05:00
Stephan 84273557f9 Move and update heated chamber settings (#13671) 
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
 2019-04-12 15:38:10 -05:00
Ludy 62b4265410 Update German language (#13665) 2019-04-12 14:48:13 -05:00
Scott Lahteine b18316dd37 Fix some spacing 2019-04-12 13:35:42 -05:00
Scott Lahteine f2ba0a5ae7 Tweak some formatting 2019-04-12 13:15:37 -05:00
Scott Lahteine 7e58d33a2e Update some headers 2019-04-12 13:04:04 -05:00
Giuliano Zaro 64ee064ded Update Italian language (#13661) 2019-04-12 12:22:43 -05:00
Scott Lahteine 14b561f182 Extra AxisEnum values for E0-E5 2019-04-12 12:13:48 -05:00
Robby Candra 9e86fc3831 Require homing to toggle leveling (#13652) 2019-04-11 14:09:41 -05:00
Ludy 9fd3e64ba8 Fix compile error with EXTRUDER>1 (#13651) 2019-04-11 13:58:50 -05:00
Jamie 509dc283f2 Restore declarations of G53-G59 (#13654) 2019-04-11 13:51:05 -05:00
chai-md 2adc37becc MAGNETIC_SWITCHING_TOOLHEAD (#13629) 2019-04-11 13:29:17 -05:00
ManuelMcLure 492883859e Don't protect unused CS pins (#13647) 2019-04-10 21:57:57 -05:00
Scott Lahteine 9898f53361 Fix missing IS_SD_PRINTING 2019-04-10 21:48:16 -05:00
Scott Lahteine 1e59a2ac73 Hide pause/stop unless active printing 2019-04-10 19:46:59 -05:00
Scott Lahteine ae42206500 Fix SD_REPRINT_LAST_SELECTED_FILE 2019-04-10 17:43:08 -05:00
Scott Lahteine d72946a8d7 Fix LPC1768 build with no watchdog 
Fix issue mentioned at https://github.com/MarlinFirmware/Marlin/pull/13587#issuecomment-481737509
 2019-04-10 17:34:15 -05:00
Scott Lahteine cee3b172b9
Fix Marlin splash screen logic (#13646) 2019-04-10 17:14:57 -05:00
ANMay-ru 052f2ac352 Fix RURAMPS4D baud rate (#13644) 2019-04-10 15:53:21 -05:00
Marcio Teixeira e6ebd30f60 Fix LCD issue on stepper timeout (#13630) 
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
 2019-04-10 15:51:48 -05:00
klcjr89 a8edd4f6d4 Fix Azteeg X5 MINI BOARD_NAME (#13632) 
Co-Authored-By: klcjr89 <klcjr89@users.noreply.github.com>
 2019-04-10 15:46:12 -05:00
Scott Lahteine 5018fdacbe
Support FYSETC_MINI_12864_PANEL (#13365) 2019-04-09 18:34:29 -05:00
InsanityAutomation 4900c28bf6 Fix IDEX tool-change, and more (#13614) 2019-04-09 18:33:40 -05:00
InsanityAutomation ba31d39f6d Azteeg X5 Mini support (#13425) 2019-04-08 23:10:45 -05:00
Scott Lahteine 9cb5c57b84 Adjustments to ui8tostr_percent 2019-04-08 21:47:50 -05:00
Scott Lahteine 321a5e6580
Fix SD card reselect when scrolled (#13624) 
- Change encoder position to 16-bit integer.
- Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.
 2019-04-08 21:10:41 -05:00
Scott Lahteine 0e3c9e726d Set default Raptor runout/caselight pins 2019-04-08 18:18:08 -05:00
Scott Lahteine 5e38d70697 Fix M217 report label, general cleanup 2019-04-08 18:18:08 -05:00
Scott Lahteine fae2b7edc3 Update MMU2 code style 2019-04-08 18:13:42 -05:00
Scott Lahteine c8a83fb122 SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-08 18:13:41 -05:00
Scott Lahteine 9abe9aff56
Confirm before starting SD print (#13616) 2019-04-08 13:44:35 -05:00
Scott Lahteine 7e0008f5b3 Fix SETCURSOR_RJ 2019-04-07 20:25:54 -05:00
Robby Candra 81c2c3ec11 Continuous filename scrolling (#13609) 2019-04-07 16:58:32 -05:00
Ludy c29820f649 Suppress compile warning (#13612) 2019-04-07 16:53:30 -05:00
Scott Lahteine a2b3ad6d0a Don't override RGB LED pins, by default 2019-04-07 16:42:26 -05:00
Bob Kuhn 9a56d90150 Fix M43 on LPC176x (#13587) 
The real fix. PR #13568 was wrong.
 2019-04-06 18:06:07 -05:00
Roxy-3D 9cee81d47e Option to show babysteps total since G28 (#13580) 2019-04-06 18:04:34 -05:00
Scott Lahteine 3221658a78 Adjust park position description 2019-04-05 20:40:50 -05:00
Scott Lahteine 028b78f623 Suppress a compile warning 2019-04-05 20:06:19 -05:00