Scott Lahteine
551752eac7
Consolidate "bedlevel" code
2017-09-21 16:26:47 -05:00
Scott Lahteine
71aefc2e22
Move heater output to Temperature class
2017-09-21 16:26:47 -05:00
Scott Lahteine
63228fc453
Move volumetric flag to GCodeParser
2017-09-21 16:26:47 -05:00
Scott Lahteine
bf7af95db3
Move flow_percentage to Planner
2017-09-21 16:26:46 -05:00
Scott Lahteine
8dc2838d98
Move host keepalive to GcodeSuite
2017-09-21 16:26:46 -05:00
Scott Lahteine
8fbb833de9
Encapsulate RGB(W) LEDs
2017-09-21 16:26:46 -05:00
Scott Lahteine
a98e9874db
FWRETRACT as a feature
2017-09-21 16:26:46 -05:00
Scott Lahteine
722786966a
Add gcode.cpp, motion.*, queue.* - Apply to some G-codes.
2017-09-21 16:26:45 -05:00
Scott Lahteine
4231faf779
Initial split-up of G-code handlers by category
2017-09-21 16:26:45 -05:00
Scott Lahteine
e0a189a481
Consolidate Buzzer
2017-09-21 16:26:45 -05:00
Scott Lahteine
bca67a5b79
Main controller updates
2017-09-21 16:26:44 -05:00
Scott Lahteine
142d8aae56
Move debugging to serial.*
2017-09-21 16:26:44 -05:00
Scott Lahteine
a1e2b5da70
Fix LCD_PINS_Dn tests in pinsDebug_list.h
2017-09-21 16:26:44 -05:00
Scott Lahteine
038f82cc38
Fix L6470 init and options
2017-09-21 16:26:43 -05:00
Scott Lahteine
42e2dd9251
Build file updates
2017-09-21 16:26:43 -05:00
Scott Lahteine
614a86a380
SD file updates
2017-09-21 16:26:43 -05:00
Scott Lahteine
82fff87e16
Pins updates
2017-09-21 16:26:43 -05:00
Scott Lahteine
3d8a0ab4b2
Module updates
2017-09-21 16:26:42 -05:00
Scott Lahteine
0fcec02db5
LCD updates
2017-09-21 16:26:42 -05:00
Scott Lahteine
7dd0a46732
Language updates
2017-09-21 16:26:41 -05:00
Scott Lahteine
4a82e95c3e
Feature file updates
2017-09-21 16:26:41 -05:00
Scott Lahteine
d7ee81202f
Libs updates
2017-09-21 16:26:41 -05:00
Scott Lahteine
34101224c4
Inc updates
2017-09-21 16:26:41 -05:00
Scott Lahteine
f52a31a275
Core updates
2017-09-21 16:26:40 -05:00
Scott Lahteine
479652073b
Config updates
2017-09-21 15:52:17 -05:00
Scott Lahteine
54326fb06a
HAL updates
2017-09-21 15:52:17 -05:00
Scott Lahteine
7e42c7563c
Move build files into place
2017-09-12 14:51:06 -05:00
Scott Lahteine
b66d65f865
Move 'sd' files
2017-09-12 14:51:05 -05:00
Scott Lahteine
0b9a88d6ce
Move 'pins' files
2017-09-12 14:51:05 -05:00
Scott Lahteine
2b3b7d5d7f
Move 'thermistor' files
2017-09-12 14:51:05 -05:00
Scott Lahteine
0c9231fd04
Move 'module' files
2017-09-12 14:51:05 -05:00
Scott Lahteine
efa578d6b0
Move 'libs' files
2017-09-12 14:51:04 -05:00
Scott Lahteine
cc92e544a5
Move 'lcd' files
2017-09-12 14:51:04 -05:00
Scott Lahteine
5be07b5db2
Move 'inc' files
2017-09-07 07:42:55 -05:00
Scott Lahteine
9ea2ff950a
Move 'gcode' files
2017-09-07 07:42:55 -05:00
Scott Lahteine
4e4d16c92e
Move 'core' files
2017-09-07 07:42:55 -05:00
Scott Lahteine
fa5f9c2aec
Move 'feature' files
2017-09-07 07:42:54 -05:00
Scott Lahteine
f536c4dccb
Move configs
2017-09-06 06:28:30 -05:00
Scott Lahteine
48351fd6d5
Move root sources
2017-09-06 06:28:29 -05:00
Scott Lahteine
27cbb939b2
Clean up some HAL code
2017-08-31 18:36:53 -05:00
Christopher Pepper
b29b66feda
Temporary fix for odd stepper behaviour with servos
2017-08-31 18:33:07 -05:00
Christopher Pepper
8afe13b1a2
Fix compile issue when watchdog was disabled
2017-08-31 18:33:07 -05:00
Christopher Pepper
b908e38d08
Add needed platform defined gaurds to compile with Arduino IDE
...
Also removed explicit platform HAL directory inclusion from platformio.ini to make sure these errors are caught by Travis in the future
2017-08-31 18:33:07 -05:00
Scott Lahteine
a037ddbf7b
Other spacing tweaks
2017-08-31 18:33:07 -05:00
Scott Lahteine
2af62a5d8d
Apply spacing, const to some HAL code
2017-08-31 18:33:07 -05:00
kfazz
fa9ff6be6e
try to fix LIN_ADVANCE for 32bit
2017-08-31 18:33:07 -05:00
kfazz
18f97c4013
add HardwareSerial and SoftwareSerial for Re-ARM.
...
HardwareSerial has been tested on Uart0 (debug header) and Uart3 (i2c connector)
Software Serial has been tested to work bi-directionally at 9600 and 115200
using pins 6 and 63 on J5, and unidirectionally (write only) at 250000.
The code used to test was Teemuatlut's tmc2208 patch, and a few small changes to main used to echo recieved chars back to a host pc.
2017-08-31 18:33:07 -05:00
Bob-the-Kuhn
01fb45b4f8
hybrid PWM system
...
Uses PWM1 to directly control pins 4, 6 & 11 (servo 0, 1 & 3) and PWM1
generated interrupts to control other pins.
Interupt control of the servo pins had too much jitter so switched all
that we could to PWM1 direct control. The PWM1 direct control pins have
less than 1 microsecond pulse width jitter while the interrupt
controlled ones can have 20+ microseconds of jitter.
Also added insurance to the servo code in the "disable servo after move"
section.
2017-08-31 18:33:07 -05:00
Tannoo
94dd39b3b7
LCD_UBL_memory_slot_corrections ( #7516 )
...
* LCD_UBL_memory_slot_corrections
Changed the memory slot edit function to work with the
`settings.calc_num_meshes()`
* Add a little more safety margin...
* More corrections
Error handling when the EEPROM is not available.
2017-08-31 18:33:07 -05:00
Roxy-3D
8587c4e1ec
Minor corrections to 32-bit branch ( #7514 )
...
Mostly... clean up some compile time warnings for the 20x4 LCD Display.
2017-08-31 18:32:09 -05:00
