Scott Lahteine
3a42b6c5c6
Patch M425 for CAN_CALIBRATE
...
Fixes #17430
2020-04-17 10:24:27 -05:00
Scott Lahteine
ac7b484703
Safe homing: Raise Z on G28 Z ( #17501 )
...
Co-Authored-By: RFBomb <robbery525@gmail.com>
2020-04-12 14:58:58 -05:00
Tor-p
d6f39a69af
Fix G76 probe height / position ( #17392 )
2020-04-06 15:32:06 -05:00
Scott Lahteine
0e06aaa2bc
Add millis helper macros
2020-04-04 02:48:30 -05:00
Scott Lahteine
53fe572bbd
Limited backlash editing with Core kinematics ( #17281 )
2020-03-27 22:00:27 -05:00
Giuliano Zaro
3b987dfcec
Fix G34 Z lower, extra "BLTOUCH" debug line ( #17175 )
2020-03-15 18:23:24 -05:00
InsanityAutomation
cee07f3f6b
Quad Z leveling, G34 (R)ecalculate ( #17122 )
2020-03-13 23:22:04 -05:00
Scott Lahteine
118bd2f8b2
Apply loop shorthand macros ( #17159 )
2020-03-13 23:18:16 -05:00
Scott Lahteine
6bead0c1b0
Shorter paths to HAL, ExtUI ( #17156 )
2020-03-13 16:29:29 -05:00
Jason Smith
9c759e5f74
Fix BAUD_RATE_GCODE, etc. ( #17135 )
2020-03-12 19:26:09 -05:00
jufimu12
627aa8db2d
Fix G34, add HOME_AFTER_G34 option ( #17108 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-10 20:00:26 -05:00
Scott Lahteine
2a71e4f336
Revert that wack backoff
2020-03-07 23:10:56 -06:00
Scott Lahteine
64d092935b
More useful ENABLED / DISABLED macros ( #17054 )
2020-03-07 22:20:41 -06:00
Scott Lahteine
5171e9da93
No more direct G28 calls
2020-03-02 21:01:58 -06:00
jufimu12
ad4a9eb73a
Fix G34 probing range/error bug ( #17052 )
2020-03-02 13:35:02 -06:00
Scott Lahteine
c4db8e49a7
XYZ_CHAR macro
2020-03-01 14:36:06 -06:00
jufimu12
ac755fce82
Fix G34 "Decreasing accuracy" bug ( #17013 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-02-28 11:42:51 -06:00
Scott Lahteine
97e87d8262
Fix G76 reachable test ( #17005 )
2020-02-27 22:47:44 -06:00
Scott Lahteine
bfbd976c09
General G76 cleanup
2020-02-27 07:53:24 -06:00
Scott Lahteine
a75a25cd7c
Replace direct call to G28(true)
2020-02-27 07:48:34 -06:00
Scott Lahteine
77b82d300a
Add idle_no_sleep
2020-02-27 06:45:33 -06:00
Scott Lahteine
e5d39063a2
Cleanups for PTC
2020-02-27 06:45:23 -06:00
Scott Lahteine
be62ab2d02
Move reachable test to Probe class
2020-02-27 06:16:33 -06:00
Scott Lahteine
025c50cc6d
Quick-homing sensorless back-off ( #16872 )
2020-02-26 06:50:13 -06:00
Scott Lahteine
cf597e2bb1
Allow weird probe values in G33
2020-02-26 05:33:57 -06:00
Scott Lahteine
e78f607ef3
Use a STR_ prefix for non-translated strings
2020-02-26 03:02:03 -06:00
Scott Lahteine
7bf2190f03
Fix CALIBRATION_GCODE pin handling
2020-02-04 08:32:43 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 ( #16755 )
2020-02-02 00:02:30 -06:00
Scott Lahteine
4716dac874
Apply REPEAT, RREPEAT, and loop macros ( #16757 )
2020-02-01 21:00:53 -06:00
InsanityAutomation
e58d1bf974
G34 automatic point assignment ( #16473 )
2020-02-01 04:50:44 -06:00
Scott Lahteine
90b6324563
Encapsulate probe as singleton class ( #16751 )
2020-02-01 04:21:36 -06:00
Scott Lahteine
50889c0f94
Move L64XX index_to_axis to progmem ( #16697 )
2020-01-30 03:24:23 -06:00
Radek Pietruszewski
e6a675e6ec
Fix missing string for M48 build ( #16708 )
2020-01-30 03:13:31 -06:00
Neskik
1db9d9f76f
Fix probe temp calibration ( #16718 )
2020-01-30 03:00:38 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
Scott Lahteine
707349d492
Updates for L64XX
2020-01-19 19:53:12 -06:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
Bob Kuhn
1ad53cee1f
Improved STMicro L64XX stepper driver support ( #16452 )
2020-01-13 18:47:30 -06:00
Scott Lahteine
95046c9047
Extend SERIAL_CHAR to take multiple arguments
2020-01-08 18:36:47 -06:00
Jason Smith
3cade6245e
Fix MIN_PROBE_EDGE bug in default ABL G29 ( #16367 )
2020-01-03 17:46:26 -06:00
Dirk O. Kaar
d0e1166cce
Fix Visual Micro "Arduino IDE for Visual Studio" support ( #16418 )
2020-01-02 19:01:38 -06:00
randellhodges
0b6c2d893e
Fix G34 with Z_DUAL_STEPPER_DRIVERS compile ( #16274 )
2019-12-20 22:03:37 -06:00
Scott Lahteine
deff538909
Fix broken M100_dump_routine
2019-12-19 21:02:14 -06:00
Scott Lahteine
b49a0e39d5
HOME_USING_SPREADCYCLE is obsolete
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 16:02:57 -06:00
Moshi Binyamini
dcdaa2025f
Sanity-check Z_STEPPER_AUTO_ALIGN coordinates ( #16231 )
2019-12-19 00:59:01 -06:00
Scott Lahteine
0400783444
Tweak G34, fix a declaration
2019-12-19 00:42:39 -06:00
danym21
6e8dcba698
Fix G28 debug line, M569 calls ( #16213 )
2019-12-15 12:00:00 -06:00
Scott Lahteine
f83bc0aa13
Optimize common strings
...
Saves 128 bytes in testing with `mftest mega 1 -y`
2019-11-29 22:54:42 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Evgeny-SPB
7116a8645c
G34 logic / typo fix ( #15938 )
2019-11-19 23:25:07 -06:00
Roxy-3D
f19fa64e98
Eliminate multiple settings to extruder_duplication_enabled in G28
...
If the IDEX mode was previously set (via GCode or the LCD Panel) to a duplication mode... It was lost after a G28 due to this redundant setting of 'extruder_duplication_enabled'.
It is very important to the various use cases of IDEX machines that extruder_duplication_enabled is preserved across a G28. The reason is this allows a person to use the LCD Panel to put the machine into a duplication mode, and then send a 'normal' part file to the printer and get two parts out of the process.
2019-11-15 15:42:01 -06:00
danym21
28e1614c2e
Add Sensorless Homing current ( #15690 )
2019-11-10 18:45:06 -06:00
Jason Smith
770adcfa15
Raise Z before homing X/Y on unknown Z ( #15859 )
2019-11-10 16:21:20 -06:00
Jacob Jordan
9895e6d766
Only use slow homing speed where applicable ( #15640 )
2019-10-24 13:14:45 -05:00
Scott Lahteine
cd3ec5a77b
Add error-check to M422
2019-10-24 12:59:50 -05:00
Jason Smith
832cb7e1ac
Z_STEPPER_AUTO_ALIGN — To align with Z stepper points ( #15195 )
2019-10-16 13:39:58 -05:00
Marcio Teixeira
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
Scott Lahteine
f307ff68f7
Multiply by float, not double
2019-09-29 17:25:27 -05:00
Alex Somesan
10bbed7f69
Fix comma/semicolon typo ( #15420 )
2019-09-29 16:50:53 -05:00
Scott Lahteine
50e4545255
Add custom types for position ( #15204 )
2019-09-29 04:25:39 -05:00
Scott Lahteine
455dabb183
Add a feedRate_t data type ( #15349 )
2019-09-26 01:28:09 -05:00
Robby Candra
9c288a682d
Followup to probe_at_point change ( #15342 )
2019-09-25 02:29:10 -05:00
Scott Lahteine
5288c399ce
Patch probe offset name, defines
2019-09-24 23:39:23 -05:00
Scott Lahteine
4e8d9fe59b
zprobe_offset => probe_offset
2019-09-24 23:36:09 -05:00
InsanityAutomation
df1e51258a
Add M851 X Y probe offsets ( #15202 )
2019-09-24 21:29:21 -05:00
Scott Lahteine
5e13fe989f
Rename some feedrate-oriented functions
2019-09-23 22:36:41 -05:00
Scott Lahteine
13d725d24d
Tweak debug messages
2019-09-20 23:35:22 -05:00
Scott Lahteine
b71a755a30
Add float suffix in G33
2019-09-17 23:30:27 -05:00
Scott Lahteine
c353eaa146
Misc changes from struct refactor ( #15289 )
2019-09-17 18:16:28 -05:00
Scott Lahteine
465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor ( #15256 )
2019-09-14 03:05:10 -05:00
Scott Lahteine
f9992c5f33
Implausible
2019-09-11 02:52:14 -05:00
Giuliano Zaro
9958f5e322
Home on G34 if steppers slept ( #15127 )
2019-09-02 02:44:48 -05:00
Luu Lac
081e4506ca
Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS ( #15069 )
2019-08-28 04:20:28 -05:00
Marcio Teixeira
274934ad81
Add LULZBOT_TOUCH_UI ( #14967 )
2019-08-16 18:34:13 -05:00
Scott Lahteine
c8e30b6639
Fix code attempting to sprintf %f ( #14869 )
...
Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.
2019-08-08 01:51:37 -05:00
Acenotass
4af9908764
Update M48 command in the status line ( #14816 )
2019-08-05 20:01:40 -05:00
teemuatlut
d4974ea719
TMC SPI Endstops and Improved Sensorless Homing ( #14044 )
2019-08-04 22:22:58 -05:00
InsanityAutomation
6f8b8c394d
Homing backoff per-axis / delta Z ( #14789 )
2019-07-31 20:50:23 -05:00
Acenotass
659d06d9b9
M48 menu item, result to status ( #14772 )
2019-07-30 02:31:14 -05:00
Giuliano Zaro
290466578f
Adafruit Grand Central M4 ( #14749 )
2019-07-28 14:48:29 -05:00
Scott Lahteine
1088846cae
Cosmetic updates from 14044
2019-07-24 01:52:36 -05:00
Jason Smith
f2c5740d06
Add 'E' argument to G34 to allow stowing between probes ( #14533 )
...
- Use the return value from probe_pt during `G34`
Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument.
- Add '`E`' argument to `G34` command allowing stowing between each probe.
2019-07-17 04:23:19 -05:00
InsanityAutomation
b8cc61262f
Finish G12, update Nozzle::clean ( #14642 )
2019-07-17 04:23:19 -05:00
Scott Lahteine
ed0e6afacb
Apply LIMIT macro
2019-07-10 03:35:39 -05:00
Scott Lahteine
750a16ad38
Fix MIN/MAX function collision with macros
2019-07-05 18:14:02 -05:00
GMagician
82ecaa767e
Remove unused code in M100
...
queue.buffer is in bss area, start_free_memory starts from heap then above of bss
2019-07-01 20:38:49 -05:00
Marcio Teixeira
e6cf7860e8
Improve ExtUI, fix compiler errors, warnings ( #14441 )
2019-06-29 00:23:57 -05:00
Scott Lahteine
93cd66ac11
Tweaky change from (C) to (c)
2019-06-27 23:58:16 -05:00
Scott Lahteine
2580104c8b
Revert recent probe changes
...
- Revert "Fix FIX_MOUNTED_PROBE compile error (#14393 )"
- Revert "Fix G28 with non-BLTouch probes (#14381 )"
- Revert "Fix BLTOUCH deploy/stow in HS mode (#14352 )"
- Revert "Apply needed BLTouch patch (#14233 )"
Co-Authored-By: AnHardt <github@kitelab.de>
2019-06-26 05:33:43 -05:00
BigIronGuru
9f136a7c67
Low-priority homing in G34 ( #14391 )
2019-06-26 03:52:01 -05:00
Scott Lahteine
49627069a5
Shorthand for home-after-deactivate
2019-06-26 03:47:55 -05:00
Marcio Teixeira
8e23e9b16c
Fix FIX_MOUNTED_PROBE compile error ( #14393 )
2019-06-25 04:55:29 -05:00
BigIronGuru
12d21e642f
Update G34 for non-BLTouch probes ( #14380 )
2019-06-23 20:55:43 -05:00
BigIronGuru
5986194c36
Fix G28 with non-BLTouch probes ( #14381 )
2019-06-23 20:53:05 -05:00
InsanityAutomation
aa0383a83b
Enhance IDEX toolchange auto-return w/ no park, full control ( #14117 )
2019-06-23 20:00:48 -05:00
BigIronGuru
9c83135d40
Only home Z at the end of G34 ( #14353 )
2019-06-22 00:43:33 -05:00
InsanityAutomation
a9acd2f497
G34 configurable angle limit ( #14321 )
2019-06-20 21:18:36 -05:00
Scott Lahteine
4c872a01f2
G-code queue singleton, front injection ( #14236 )
2019-06-19 00:00:19 -05:00
InsanityAutomation
bf64dd4db6
Improve G34, M422 (Z alignment) ( #14142 )
2019-06-18 07:02:18 -05:00
