Commit graph

15694 commits

Author SHA1 Message Date
Scott Lahteine 53fe572bbd
Limited backlash editing with Core kinematics (#17281) 2020-03-27 22:00:27 -05:00
InsanityAutomation de648bfdc1
Add Funmat HT V4.0 board support (#17305)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-27 21:08:47 -05:00
thinkyhead e71b25a555 [cron] Bump distribution date (2020-03-28) 2020-03-28 00:03:16 +00:00
Mathias Rasmussen 8752fbd92c
Store case light brightness in EEPROM (#17307) 2020-03-27 17:38:28 -05:00
InsanityAutomation bed41af868
Fix Stepper PWM menu (#17298) 2020-03-27 17:30:17 -05:00
Giuliano Zaro 129b270628
QSPI EEPROM for SAMD51 (#17292) 2020-03-27 17:29:17 -05:00
InsanityAutomation 3655e240f5
Fix SD finished ExtUI / host action (#17285) 2020-03-27 16:06:39 -05:00
thinkyhead 98ef161bfe [cron] Bump distribution date (2020-03-27) 2020-03-27 00:03:27 +00:00
Scott Lahteine 54a12ee1d6 Tweak eeprom storage type 2020-03-25 21:07:08 -05:00
Scott Lahteine d6a4c3079d Tweak ui.finish_status 2020-03-25 21:07:08 -05:00
Giuliano Zaro 8122468a36
Update Italian language (#17293) 2020-03-25 21:05:36 -05:00
Acenotass 5c150c0c94
Update Russian language (#17290) 2020-03-25 21:04:57 -05:00
Scott Lahteine 5ec1a8bb2b Fix M0 unused var warning 2020-03-25 20:27:21 -05:00
Scott Lahteine dd6781217a motion.cpp: HAS_DIST_MM_ARG 2020-03-25 19:21:48 -05:00
Scott Lahteine 0175189c34 Allow G2_PWM to be slimmer 2020-03-25 19:18:42 -05:00
Scott Lahteine adb6334ba0 Use "dist" instead of "delta" for clarity 2020-03-25 19:18:42 -05:00
thinkyhead 4dea020050 [cron] Bump distribution date (2020-03-26) 2020-03-26 00:03:54 +00:00
Scott Lahteine c86ee574ec Drop old comment 2020-03-25 15:11:12 -05:00
Scott Lahteine f2ed18d150 M303 followup
- Put 'D' before other params for clean exit.
- Use serial on/off for debug status.
2020-03-25 15:08:52 -05:00
Roxy-3D 1986e1cdf8
Allow PID_DEBUG to be turned on and off (#17284)
M303 D will now toggle activation of PID_DEBUG output.   This allows the debug capability to be built into the firmware, but turned on and off as needed.
2020-03-24 19:38:09 -05:00
thinkyhead 0aeee64cca [cron] Bump distribution date (2020-03-25) 2020-03-25 00:03:18 +00:00
Roxy-3D 075a86b076
Update LCD timing on Formbot T-Rex 2+ machines
The code is slightly more optimized than it used to be and this has caused the setup and hold times on the Formbot T-Rex 2+ machines to be insufficient.   This change gives sufficient margin and the LCD Display is clean again.
2020-03-24 17:15:03 -05:00
Scott Lahteine 7124b2164d Version 2.0.5.2 2020-03-24 17:11:59 -05:00
Scott Lahteine efc19260a7 Merge patches from bugfix-2.0.x 2020-03-24 17:10:53 -05:00
Roxy-3D 5d515c3a2f
Adjust for timing shift on Max7219 displays on AVR's
Something has shifted.   The previous timing delays on the Max7219 debug displays is too tight without this correction.
I suspect something has been optimized and roughly 50ns of needed setup and hold time has disappeared.
This corrects the issue and the display results are clean again.
2020-03-24 17:08:31 -05:00
Scott Lahteine 68face848a Sanity check CONTROLLERFAN_SECS 2020-03-24 16:41:21 -05:00
Scott Lahteine 7455bb09b3
Add SoftwareSerialM for MKS Robin (#17207) 2020-03-24 16:14:30 -05:00
ellensp 41e944da00
Fix Emergency Parser on DUE (#17276)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-24 15:14:52 -05:00
MarkMan0 4113481c4e
Fix limits on acceleration editing (#17280) 2020-03-24 15:13:37 -05:00
mkpfalz 3260228009
Sanity-check CORE backlash axes (#17279)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-24 14:08:55 -05:00
rado79 bef9b9b07e
Delay after homing_backoff for CoreXY sensorless homing (#17273) 2020-03-23 20:32:36 -05:00
thinkyhead edd6f6c5f2 [cron] Bump distribution date (2020-03-24) 2020-03-24 00:03:08 +00:00
Scott Lahteine c87d73045b Fix extra M114 output line
Fixes #17255
2020-03-23 18:31:26 -05:00
George Fu e3ebbe25e0
DGUS updates (#17260) 2020-03-23 18:00:22 -05:00
ellensp cd4060a99c
Add USB serial support to SERIAL_PORT_2 on DUE (#17245)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-23 17:55:21 -05:00
Scott Lahteine adb7a88428 Fix an unused var warning 2020-03-23 17:35:43 -05:00
Scott Lahteine 580d314fbe Skip impossible PWM sanity-checks 2020-03-23 17:35:43 -05:00
Scott Lahteine fe154fa5de Fix CONTROLLER_FAN options compile 2020-03-23 17:35:43 -05:00
RasmusAaen 717c216851
Fix Copymaster Y_MAX pin (#17267) 2020-03-23 17:34:38 -05:00
thinkyhead 27c281eec3 [cron] Bump distribution date (2020-03-23) 2020-03-23 00:03:08 +00:00
Scott Lahteine e7a9f17371 Tweak serial port descriptions 2020-03-21 23:38:44 -05:00
Scott Lahteine 2460a3dfbb Fix custom version file include 2020-03-21 23:34:19 -05:00
Scott Lahteine 2c325c2a7d Format some pins files 2020-03-21 21:18:46 -05:00
Scott Lahteine 9340a33980 Add a pins formatting script 2020-03-21 21:18:46 -05:00
Scott Lahteine e62b52da99 Use pin/port names for CHITU pins 2020-03-21 21:18:46 -05:00
Scott Lahteine 7988e31f5e whitespace 2020-03-21 21:16:15 -05:00
Scott Lahteine 1674df00b1 Stay at v0.91 of USBComposite for STM32F1 2020-03-21 20:56:14 -05:00
thinkyhead 29874b21b6 [cron] Bump distribution date (2020-03-22) 2020-03-22 00:03:15 +00:00
Scott Lahteine 04cea864bc
Split up STM32 pins files (#17212) 2020-03-20 23:45:00 -05:00
thinkyhead 3151856e98 [cron] Bump distribution date (2020-03-21) 2020-03-21 00:03:28 +00:00